shiftOut(), docs fixes

1 files changed, 0 insertions, 136 deletions

diff --git a/docs/source/lang/unimplemented/shiftout.rst b/docs/source/lang/unimplemented/shiftout.rst
deleted file mode 100644
index ff3852f..0000000
--- a/docs/source/lang/unimplemented/shiftout.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. _lang-shiftout:
-
-shiftOut()
-==========
-
-Description
------------
-
-Shifts out a byte of data one bit at a time. Starts from either the
-most (i.e. the leftmost) or least (rightmost) significant bit. Each
-bit is written in turn to a data pin, after which a clock pin is
-pulsed to indicate that the bit is available.
-
-
-
-This is a software implementation; Arduino (as of 0019) also
-provides an `SPI library <http://arduino.cc/en/Reference/SPI>`_
-that uses the hardware implementation.
-
-
-
-Syntax
-------
-
-shiftOut(dataPin, clockPin, bitOrder, value)
-
-
-
-Parameters
-----------
-
-dataPin: the pin on which to output each bit (*int*)
-
-
-
-clockPin: the pin to toggle once the **dataPin** has been set to
-the correct value (*int*)
-
-
-
-bitOrder: which order to shift out the bits; either **MSBFIRST** or
-**LSBFIRST**.
-(Most Significant Bit First, or, Least Significant Bit First)
-
-
-
-value: the data to shift out. (*byte*)
-
-
-
-Returns
--------
-
-None
-
-
-
-Note
-----
-
-The **dataPin** and **clockPin** must already be configured as
-outputs by a call to
-`pinMode <http://arduino.cc/en/Reference/PinMode>`_\ ().
-
-
-
-**shiftOut** is currently written to output 1 byte (8 bits) so it
-requires a two step operation to output values larger than 255.
-
-::
-
-    // Do this for MSBFIRST serial
-    int data = 500;
-    // shift out highbyte
-    shiftOut(dataPin, clock, MSBFIRST, (data >> 8));
-    // shift out lowbyte
-    shiftOut(data, clock, MSBFIRST, data);
-
-    // Or do this for LSBFIRST serial
-    data = 500;
-    // shift out lowbyte
-    shiftOut(dataPin, clock, LSBFIRST, data);
-    // shift out highbyte
-    shiftOut(dataPin, clock, LSBFIRST, (data >> 8));
-
-
-
-Example
--------
-
-*For accompanying circuit, see the `tutorial on controlling a 74HC595 shift register <http://arduino.cc/en/Tutorial/ShiftOut>`_.*
-
-
-
-::
-
-    //**************************************************************//
-    //  Name    : shiftOutCode, Hello World                         //
-    //  Author  : Carlyn Maw,Tom Igoe                               //
-    //  Date    : 25 Oct, 2006                                      //
-    //  Version : 1.0                                               //
-    //  Notes   : Code for using a 74HC595 Shift Register           //
-    //          : to count from 0 to 255                            //
-    //****************************************************************
-
-    //Pin connected to ST_CP of 74HC595
-    int latchPin = 8;
-    //Pin connected to SH_CP of 74HC595
-    int clockPin = 12;
-    ////Pin connected to DS of 74HC595
-    int dataPin = 11;
-
-    void setup() {
-      //set pins to output because they are addressed in the main loop
-      pinMode(latchPin, OUTPUT);
-      pinMode(clockPin, OUTPUT);
-      pinMode(dataPin, OUTPUT);
-    }
-
-    void loop() {
-      //count up routine
-      for (int j = 0; j < 256; j++) {
-        //ground latchPin and hold low for as long as you are transmitting
-        digitalWrite(latchPin, LOW);
-        shiftOut(dataPin, clockPin, LSBFIRST, j);
-        //return the latch pin high to signal chip that it
-        //no longer needs to listen for information
-        digitalWrite(latchPin, HIGH);
-        delay(1000);
-      }
-    }
-
-
-
-
-.. include:: /lang/cc-attribution.txt