Remove reST documentation, attendant updates.

The documentation covers topics not specifically relevant to libmaple,
so it doesn't make sense for it to be part of the libmaple source
distribution.

Delete the docs/ tree, and prepare libmaple for use with the new
leaflabs-docs repo, which will contain the docs from now on.

* README: update to reflect this change

* support/doxygen/Doxyfile: This is the old docs/Doxyfile

* Makefile: Add a doxygen target

* wirish/comm/HardwareSerial.h: fix reference to docs/.  The comment
  informing maintainers that the HardwareSerial interface is
  documented by hand refers to the docs/ tree, which no longer exists.
  Update it to refer to the separate leaflabs-docs repository.

* support/scripts/copy-to-ide: No longer build the documentation

1 files changed, 0 insertions, 136 deletions

diff --git a/docs/source/ide.rst b/docs/source/ide.rst
deleted file mode 100644
index b3ef653..0000000
--- a/docs/source/ide.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. _ide:
-
-Maple IDE
-=========
-
-This page documents the basic functionality of the Maple IDE.
-Specifically, it describes the operation of the buttons on the main
-toolbar.  It is expected to become more comprehensive over time.
-
-The :ref:`Maple Quickstart <maple-quickstart>` is another good source of
-information on the IDE; it is especially useful for setting up a
-computer for the first time.
-
-.. figure:: /_static/img/ide-blinky.png
-   :align: center
-   :alt: Maple IDE
-
-.. _ide-verify:
-
-Verify
-------
-
-.. image:: /_static/img/button-verify.png
-   :align: left
-
-Click Verify to compile the current sketch.
-
-.. _ide-stop:
-
-Stop
-----
-
-.. image:: /_static/img/button-stop.png
-   :align: left
-
-Click Stop to cancel a compilation.
-
-.. _ide-new:
-
-New
----
-
-.. image:: /_static/img/button-new.png
-   :align: left
-
-Click New to begin a fresh sketch.
-
-.. _ide-open:
-
-Open
-----
-
-.. image:: /_static/img/button-open.png
-   :align: left
-
-Click Open to open a new sketch.  By default, this will look in you
-*sketchbook*, which is a directory on your system which contains all
-of your sketches.  The default directory of your sketchbook varies by
-operating system; you can change it in the IDE preferences.
-
-.. _ide-save:
-
-Save
-----
-
-.. image:: /_static/img/button-save.png
-   :align: left
-
-Click Save to save the currently opened sketch.
-
-.. _ide-upload:
-
-Upload
-------
-
-.. image:: /_static/img/button-upload.png
-   :align: left
-
-Click Upload to send the compiled sketch to your Maple to run.  Before
-you click Upload, you must have a memory location and serial port
-selected.  The memory location, either Flash or RAM, determines
-whether the compiled sketch binary will be stored on the Maple.  You
-can choose this using the Tools > Board menu.  The serial port
-corresponds to the Serial-over-USB connection the Maple has
-established with your computer.  This looks like "COM1", "COM2",
-etc. on Windows, "/dev/tty.usbmodemXXX" on Mac (where "XXX" is some
-sequence of letters and numbers), or "/dev/ttyACMXXX" on Linux (again,
-where "XXX" is some sequence of letters and numbers).  You can choose
-a serial port using the Tools > Serial Port menu.
-
-If you click Upload without having made these choices; The IDE
-*should* prompt you to do so.  However, if you're trying to upload and
-are unsuccessful, make sure you've made choices for both board and
-serial port.
-
-For more help, the upload process is documented in more detail (with
-screenshots) in the :ref:`quickstart <maple-quickstart-upload>`.
-
-If all else fails, try putting your Maple in :ref:`perpetual
-bootloader mode <troubleshooting-perpetual-bootloader>` before
-uploading.
-
-In any case, you can always find us on the `forum`_ or `contact us
-directly`_.
-
-.. _ide-serial-monitor:
-
-Serial Monitor
---------------
-
-.. image:: /_static/img/button-serial-monitor.png
-   :align: left
-
-Click Serial Monitor to open up a communications channel between your
-PC and the Maple's :ref:`Serial-over-USB <lang-serialusb>`
-(``SerialUSB``) virtual serial port.
-
-If the serial monitor is open, any information sent to the computer
-(e.g. using :ref:`SerialUSB.println() <lang-serialusb-println>` will
-be displayed in the large text area.  You can send data to the Maple
-(to be read with e.g. :ref:`SerialUSB.read() <lang-serialusb-read>`)
-by typing into the small text box and either hitting the Enter key or
-pressing the Send button.
-
-Here is an example serial monitor session with the InteractiveTest
-sketch (which you can load in the IDE by choosing menu item File >
-Examples > Maple > InteractiveTest):
-
-.. image:: /_static/img/serial-monitor.png
-
-This is the result of typing "?" in the text box and clicking Send.
-
-.. note:: You cannot upload a sketch while the serial monitor is open.
-   If you click :ref:`Upload <ide-upload>` while the serial monitor is
-   open, the IDE will close it for you before proceeding with the
-   upload.