Merge remote branch 'leaf/master'

1 files changed, 0 insertions, 67 deletions

diff --git a/docs/source/arduino/pinmode.rst b/docs/source/arduino/pinmode.rst
deleted file mode 100644
index 34c7998..0000000
--- a/docs/source/arduino/pinmode.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. highlight:: cpp
-
-.. _arduino-pinmode:
-
-pinMode()
-=========
-
-.. doxygenfunction:: pinMode
-
-.. doxygenenum:: WiringPinMode
-
-Discussion
-----------
-
-pinMode() is usually called within :ref:`arduino-setup` in order to
-configure a pin for a certain usage (although it may be called from
-anywhere).
-
-
-Example
--------
-
- ::
-
-    
-    int ledPin = 13;                 // LED connected to digital pin 13
-    
-    void setup()
-    {
-      pinMode(ledPin, OUTPUT);      // sets the digital pin as output
-    }
-    
-    void loop()
-    {
-      digitalWrite(ledPin, HIGH);   // sets the LED on
-      delay(1000);                  // waits for a second
-      digitalWrite(ledPin, LOW);    // sets the LED off
-      delay(1000);                  // waits for a second
-    }
-
-
-
-Arduino Compatibility Note
---------------------------
-
-The libmaple implementation of pinMode() supports OUTPUT and INPUT
-modes with a meaning identical to that of the Arduino function.
-
-INPUT_ANALOG and PWM modes were added because the Maple does not
-distinguish between analog and digital pins the same way the Arduino
-does.  Unlike the Arduino, you **must call pinMode**\ () to set up a pin
-for these purposes before a call to, e.g., :ref:`arduino-analogRead`.
-In practice, this should only add a few lines of pinMode() calls to
-your :ref:`arduino-setup` function.
-
-OUTPUT_OPEN_DRAIN, INPUT_PULLUP, INPUT_PULLDOWN, and PWM_OPEN_DRAIN
-modes represent functionality not currently available on Arduino
-boards.
-
-See also
---------
-
--  :ref:`arduino-constants`
--  :ref:`arduino-digitalwrite`
--  :ref:`arduino-digitalread`
--  Maple :ref:`GPIO <gpio>` reference page
--  Arduino `pinMode() <http://www.arduino.cc/en/Reference/PinMode>`_ reference