Merge remote branch 'leaf/master'

1 files changed, 0 insertions, 94 deletions

diff --git a/docs/source/arduino/delay.rst b/docs/source/arduino/delay.rst
deleted file mode 100644
index 973c75b..0000000
--- a/docs/source/arduino/delay.rst
+++ /dev/null
@@ -1,94 +0,0 @@
-.. _arduino-delay:
-
-delay()
-=======
-
-Description
------------
-
-Pauses the program for the amount of time (in miliseconds)
-specified as parameter. (There are 1000 milliseconds in a second.)
-
-
-
-Syntax
-------
-
-delay(ms)
-
-
-
-Parameters
-----------
-
-ms: the number of milliseconds to pause (*unsigned long*)
-
-
-
-Returns
--------
-
-nothing
-
-
-
-Example
--------
-
-::
-
-    int ledPin = 13;                 // LED connected to digital pin 13
-    
-    void setup()
-    {
-      pinMode(ledPin, OUTPUT);      // sets the digital pin as output
-    }
-    
-    void loop()
-    {
-      digitalWrite(ledPin, HIGH);   // sets the LED on
-      delay(1000);                  // waits for a second
-      digitalWrite(ledPin, LOW);    // sets the LED off
-      delay(1000);                  // waits for a second
-    }
-
-
-
-Caveat
-------
-
-While it is easy to create a blinking LED with the delay()
-function, and many sketches use short delays for such tasks as
-switch debouncing, the use of delay() in a sketch has significant
-drawbacks. No other reading of sensors, mathematical calculations,
-or pin manipulation can go on during the delay function, so in
-effect, it brings most other activity to a halt. For alternative
-approaches to controlling timing see the
-`millis() <http://arduino.cc/en/Reference/Millis>`_ function and
-the sketch sited below. More knowledgeable programmers usually
-avoid the use of delay() for timing of events longer than 10's of
-milliseconds unless the Arduino sketch is very simple.
-
-
-
-Certain things *do* go on while the delay() function is controlling
-the Atmega chip however, because the delay function does not
-disable interrupts. Serial communication that appears at the RX pin
-is recorded, PWM
-(`analogWrite <http://arduino.cc/en/Reference/AnalogWrite>`_)
-values and pin states are maintained, and
-`interrupts <http://arduino.cc/en/Reference/AttachInterrupt>`_ will
-work as they should.
-
-
-
-See also
---------
-
-
--  `millis <http://arduino.cc/en/Reference/Millis>`_\ ()
--  `micros <http://arduino.cc/en/Reference/Micros>`_\ ()
--  `delayMicroseconds <http://arduino.cc/en/Reference/DelayMicroseconds>`_\ ()
--  `Blink Without Delay <http://arduino.cc/en/Tutorial/BlinkWithoutDelay>`_
-   example
-