[no description] https://git.bnewbold.net/librambutan/atom?h=master 2012-06-07T07:40:11+00:00 2012-06-07T07:40:11+00:00 Marti Bolivar mbolivar@leaflabs.com 2012-06-07T05:24:01+00:00 urn:sha1:42570013c5266449f7e8512a77fe66b8e852294d This has gone unmaintained for long enough. Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com> 2011-05-27T00:44:47+00:00 Perry Hung iperry@gmail.com 2011-05-27T00:21:36+00:00 urn:sha1:2bd55903033d1ff8b3dc5082c80c18c877460bc3 1) Reset, halt, and unprotect the the flash before writing to it. This fixes a bug in which every other flash attempt would fail. 2) Maple R5 and below have NRST and JTNRST erroneously tied together, resulting in a full TAP and system reset when a reset is asserted. This prevents the 'reset halt' command from working. This can be fixed hard-hack style by cutting the trace out of JTNRST. Users of the Leaf Maple JTAG adapter will also need to cut the trace between TRST and SRST. 3) Assuming you have a functioning 'reset halt' setup (see 2), the 'make debug' command now halts the chip and waits for a gdb connection before proceeding execution. 2011-05-27T00:13:09+00:00 Perry Hung iperry@gmail.com 2011-05-27T00:13:09+00:00 urn:sha1:d9f2a93159df96eef0d8084b96df7268533177ff Small script to detect the openocd version and choose the appropriate debug/flash script for use with JTAG debugging. 2011-01-25T06:05:58+00:00 Perry Hung iperry@gmail.com 2011-01-25T06:03:54+00:00 urn:sha1:867c530940d79919da590d948f3339541fb4e491 flash and run scripts for opencd v0.4.0 also snuck in a gitignore rule for notes/ 2010-09-01T04:02:36+00:00 bnewbold bnewbold@robocracy.org 2010-09-01T04:02:36+00:00 urn:sha1:d6a32991684b7bfd8b91e3358dee4ca3fc887021 2010-09-01T02:05:39+00:00 bnewbold bnewbold@robocracy.org 2010-09-01T02:05:39+00:00 urn:sha1:0ccec95446d4c7f3ea47a46d267c791fb22bb8d4 Still not working but fixed a lot of merge errors 2010-08-06T01:43:58+00:00 bnewbold bnewbold@robocracy.org 2010-08-06T01:43:41+00:00 urn:sha1:ccd9833f264d6e20a9f2c81baebe162f07eec996 2010-06-26T01:23:04+00:00 Perry Hung iperry@alum.mit.edu 2010-06-24T15:16:26+00:00 urn:sha1:2c043efb66416f3d5cd85f0939054766082354de Major build system rewrite. New and exciting: 1. Proper dependency tracking. All source files including header files should be properly tracked and recompiled as necessary when they are changed. 2. Build-type tracking. If the target changes from 'ram' to 'flash,' for example, the build system will force a rebuild rather than incorrectly link modules to a different address. 3. New targets: The old 'ram,' 'flash,' and 'jtag' targets have been replaced with the environment variable MAPLE_TARGET, which controls the link address. Users can either export it to their environment, or pass MAPLE_TARGET on the command-line. Once this is set, sketches can be compiled with 'make sketch,' or simply 'make.' Note: the default is MAPLE_TARGET='flash.' The target 'install' now automagically uploads the sketch to the board using the appropriate method. The 'run' target has been renamed to 'debug.' It starts an openocd gdb server. 4. Odds and ends: -Verbose and 'quiet' modes. Set V=1 for verbose compilation, the default is quiet. -Object file sizes and disassembly information is generated and placed in build/$(BOARD).sizes and build/$(BOARD).disas, respectively. -Parallel make with -j should speed things up if you have multiple cores. 2010-06-06T01:46:22+00:00 Perry Hung iperry@alum.mit.edu 2010-06-06T01:46:22+00:00 urn:sha1:e2b295651a79bdca5e8cc71b3098bfdfb0e4a99e 2010-05-29T02:52:53+00:00 Perry Hung iperry@alum.mit.edu 2010-05-29T02:52:53+00:00 urn:sha1:1a908d88b8c288fca89b17ceea182044d82e766e