If running a router behind a router, don't forget to set different subnets! Eg, if the "upstream" router is at 192.168.1.1, then downstream routers should be at 192.168.2.1 (or similar). To get lsusb and lspci, install the usbutils and pciutils packages. To bring up new adapters (eg, USB or miniPCI), process is to search wikidevi.com to find the drivers which support either the exact device or chipset, then update opkg and grep output of "opkg list" for the OpenWRT kernal package for those drivers. Use the ``sysupgrade`` images when upgrading an existing OpenWrt-based installation, either via the LuCI web interface or the command line (wget). Use the ``factory`` image when installing OpenWrt through the original firmware's web interface or using the tftp netboot method. ## RouterStation Pro miniPCI issues: http://www.elinux.org/Flameman/routerstation-pro No dice using Intel 2200 with ipw2200 driver; got a kernel crash. Driver doesn't support MIPS? Trac ticket: https://dev.openwrt.org/ticket/7516 See also pfSense: http://devwiki.pfsense.org/RouterStationPRO ## Tenda W311Ma blargh. doesn't seem to work with tp2x00 (?) drivers?