From b42252d7a443154003099080ecd2fba670d89dc7 Mon Sep 17 00:00:00 2001 From: bnewbold Date: Sun, 21 Oct 2012 10:42:34 -0400 Subject: update vpn instructions --- networking/ipv6vpn.page | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'networking') diff --git a/networking/ipv6vpn.page b/networking/ipv6vpn.page index ef27011..2f82b8e 100644 --- a/networking/ipv6vpn.page +++ b/networking/ipv6vpn.page @@ -1,4 +1,6 @@ +*Note: see newer instructions at http://wiki.rooter.is/vpntunnel* + Note to self: when remote VPS reboots, run code in "VPS Host-side" section. TODO: try ifconfig-ipv6 to simplify server setup? @@ -30,7 +32,7 @@ On the remote host (runing debian wheezy), as root: apt-get install openvpn udev cp -R /usr/share/doc/openvpn/examples/easy-rsa/ /etc/openvpn - cd /etc/openvpn/easy-rsa/2.0/keys/ + cd /etc/openvpn/easy-rsa/2.0/ # edit vars file, set COUNTRY PROVINCE CITY ORG EMAIL defaults . vars . clean-all @@ -131,7 +133,7 @@ change to running, check the system logs (front page, "System Log" sub-tab). Go to "Network" tab of web interface and create new "wan6" interface with the "tun0" OpenVPN adapter selected. Set the IPv6 address to fec0::2 and the IPv6 -gateway to fec0:;1. Go to "Firewall Settings" and create a new wan6 firewall +gateway to fec0::1. Go to "Firewall Settings" and create a new wan6 firewall zone. On the radvd tab, set the prefix to the site-specific prefix; enable and keep -- cgit v1.2.3