Import Debian changes 2d2-1debian/2d2-1

slib (2d2-1) unstable; urgency=low

  * New upstream version
  * Revert back to free.  Is now so.

slib (2d1-1) unstable; urgency=low

  * New upstream version.
  * Move to non-free.  FSF pointed out license doesn't allow modified
    versions to be distributed.
  * Get a complete list of copyrights that apply to the source into
    copyright file.
  * Remove setup for guile 1.3.
  * Remove postrm.  Just calling install-info (lintian)  Move install-info
    call to prerm since doc-base doesn't do install-info.

slib (2c9-3) unstable; urgency=low

  * Change info location to section "The Algorithmic Language Scheme" to
    match up with where guile puts it's files.
  * Postinst is running slibconfig now.  (Closes: #75891)

slib (2c9-2) unstable; urgency=low

  * Stop installing slibconfig (for guile).
  * In postinst if /usr/sbin/slibconnfig exists call it (Close: #75843
    #75891).

slib (2c9-1) unstable; urgency=low

  * New upstream (Closes: #74760)
  * replace string-index with strsrch:string-index in http-cgi.scm.
  * Add doc-base support (Closes: #31163)

1 files changed, 138 insertions, 34 deletions

diff --git a/README b/README
index daae3a6..8d4d31d 100644
--- a/README
+++ b/README
@@ -1,15 +1,15 @@
-This directory contains the distribution of Scheme Library slib2c7.
+This directory contains the distribution of Scheme Library slib2d2.
 Slib conforms to Revised^5 Report on the Algorithmic Language Scheme
 and the IEEE P1178 specification.  Slib supports Unix and similar
 systems, VMS, and MS-DOS.
 
-The maintainer can be reached at jaffer @ ai.mit.edu.
+The maintainer can be reached at agj @ alum.mit.edu.
 	    http://swissnet.ai.mit.edu/~jaffer/SLIB.html
 
 			       MANIFEST
 
   `README' is this file.  It contains a MANIFEST, INSTALLATION
-	INSTRUCTIONS, and proposed coding standards.
+	INSTRUCTIONS, and coding guidelines.
   `FAQ' Frequently Asked Questions and answers.
   `ChangeLog' documents changes to slib.
   `slib.texi' has documentation on library packages in TexInfo format.
@@ -18,22 +18,23 @@ The maintainer can be reached at jaffer @ ai.mit.edu.
 	reflect your system.
   `bigloo.init' is a configuration file for Bigloo.
   `chez.init' is a configuration file for Chez Scheme.
+  `DrScheme.init' is a configuration file for DrScheme.
   `elk.init' is a configuration file for ELK 2.1
   `gambit.init' is a configuration file for Gambit Scheme.
   `macscheme.init' is a configuration file for MacScheme.
   `mitscheme.init' is a configuration file for MIT Scheme.
-  `mitcomp.pat' is a patch file which adds definitions to SLIB files
-	for the MitScheme compiler.
   `pscheme.init' is configuration file for PocketScheme 0.2.5 (WinCE SIOD)
   `RScheme.init' is a configuration file for RScheme.
-    `scheme2c.init' is a configuration file for DEC's scheme->c.
+  `scheme2c.init' is a configuration file for DEC's scheme->c.
   `scheme48.init' is a configuration file for Scheme48.
+  `s48-0_57.init is a configuration file for Scheme48-0.57.
   `scsh.init' is a configuration file for Scheme-Shell
   `scm.init' is a configuration file for SCM.
   `t3.init' is a configuration file for T3.1 in Scheme mode.
   `STk.init' is a configuration file for STk.
   `umbscheme.init' is a configuration file for umb-scheme.  
   `vscm.init' is a configuration file for VSCM.
+  `guile.init' is a configuration file for guile.
   `mklibcat.scm' builds the *catalog* cache.
   `require.scm' has code which allows system independent access to
 	the library files.
@@ -56,6 +57,7 @@ The maintainer can be reached at jaffer @ ai.mit.edu.
   `debug.scm' has handy higher level debugging aids.
   `strport.scm' has routines for string-ports.
   `strsrch.scm' search for chars or substrings in strings and ports.
+  `differ.scm' An O(NP) Sequence Comparison Algorithm.
 
   `alist.scm' has functions accessing and modifying association lists.
   `hash.scm' defines hash, hashq, and hashv.
@@ -68,6 +70,7 @@ The maintainer can be reached at jaffer @ ai.mit.edu.
   `primes.scm' has primes and probably-prime?.
   `factor.scm' has factor.
   `root.scm' has Newton's and Laguerre's methods for finding roots.
+  `minimize.scm' has Golden Section Search for minimum value.
   `cring.scm' extend + and * to custom commutative rings.
   `selfset.scm' sets single letter identifiers to their symbols.
   `determ.scm' compute determinant of list of lists.
@@ -87,8 +90,11 @@ The maintainer can be reached at jaffer @ ai.mit.edu.
   `alistab.scm' has association list base tables.
   `dbutil.scm' has utilities for creating and manipulating relational
 	databases.
-  `htmlform' generates HTML2.0 forms and service CGI requests from RDB
-	command tables.
+  `htmlform.scm' generates HTML-3.2 with forms.
+  `db2html.scm' convert relational database to hyperlinked tables and
+	pages.
+  `http-cgi.scm' serves WWW pages with HTTP or CGI.
+  `uri.scm' encodes and decodes Uniform Resource Identifiers.
   `dbrowse.scm' browses relational databases.
   `paramlst.scm' has procedures for passing parameters by name.
   `getparam.scm' has procedures for converting getopt to parameters.
@@ -135,6 +141,7 @@ The maintainer can be reached at jaffer @ ai.mit.edu.
   `tsort.scm' has topological-sort.
   `comlist.scm' has many common list and mapping procedures.
   `tree.scm' has functions dealing with trees.
+  `coerce.scm' has coerce and type-of from Common-Lisp.
   `chap.scm' has functions which compare and create strings in
 	"chapter order".
 
@@ -147,23 +154,49 @@ The maintainer can be reached at jaffer @ ai.mit.edu.
   `ratize.scm' has function rationalize from Revised^4 spec.
   `trnscrpt.scm' has transcript-on and transcript-off from Revised^4 spec.
   `withfile.scm' has with-input-from-file and with-output-to-file from R4RS.
-  `dynwind.scm' has proposed dynamic-wind from R5RS.
-  `eval.scm' has proposed eval with environments from R5RS.
+  `dynwind.scm' has dynamic-wind from R5RS.
+  `eval.scm' has eval with environments from R5RS.
   `dwindtst.scm' has routines for characterizing dynamic-wind.
-  `dynamic.scm' has proposed DYNAMIC data type.
+  `dynamic.scm' has DYNAMIC data type [obsolete].
   `fluidlet.scm' has fluid-let syntax.
-  `struct.scm' has defmacros which implement RECORDS from the book:
-	"Essentials of Programming Languages".
-  `structure.scm' has syntax-case macros for the same.
-  `structst.scm' has test code for struct.scm.
+  `structure.scm' has undocumented syntax-case macros.
   `byte.scm' has arrays of small integers.
-  `nclients' provides a Scheme interface to FTP and WWW Browsers.
+  `nclients.scm' provides a Scheme interface to FTP and WWW Browsers.
+  `pnm.scm' provides a Scheme interface to "portable bitmap" files.
+  `simetrix.scm' provides SI Metric Interchange Format.
+  `srfi.scm' implements Scheme Request for Implementation.
+  `srfi-N.scm' implements srfi-N.
 
 		      INSTALLATION INSTRUCTIONS
 
-  Check the manifest in `README' to find a configuration file for your
-Scheme implementation.  Initialization files for most IEEE P1178
-compliant Scheme Implementations are included with this distribution.
+  There are four parts to installation:
+
+   * Unpack the SLIB distribution.
+
+   * Configure the Scheme implementation(s) to locate the SLIB
+     directory.
+
+   * Arrange for Scheme implementation to load its SLIB initialization
+     file.
+
+   * Build the SLIB catalog for the Scheme implementation.
+
+Unpacking the SLIB Distribution
+-------------------------------
+
+  If the SLIB distribution is a Linux RPM, it will create the SLIB
+directory `/usr/share/slib'.
+
+  If the SLIB distribution is a ZIP file, unzip the distribution to
+create the SLIB directory.  Locate this `slib' directory either in your
+home directory (if only you will use this SLIB installation); or put it
+in a location where libraries reside on your system.  On unix systems
+this might be `/usr/share/slib', `/usr/local/lib/slib', or
+`/usr/lib/slib'.  If you know where SLIB should go on other platforms,
+please inform agj @ alum.mit.edu.
+
+Configure Scheme Implementation to Locate SLIB
+----------------------------------------------
 
   If the Scheme implementation supports `getenv', then the value of the
 shell environment variable SCHEME_LIBRARY_PATH will be used for
@@ -172,30 +205,101 @@ MITScheme, scheme->c, VSCM, and SCM support `getenv'.  Scheme48
 supports `getenv' but does not use it for determining
 `library-vicinity'.  (That is done from the Makefile.)
 
+  The `(library-vicinity)' can also be specified from the SLIB
+initialization file or by implementation-specific means.
+
+Loading SLIB Initialization File
+--------------------------------
+
+  Check the manifest in `README' to find a configuration file for your
+Scheme implementation.  Initialization files for most IEEE P1178
+compliant Scheme Implementations are included with this distribution.
+
   You should check the definitions of `software-type',
 `scheme-implementation-version', `implementation-vicinity', and
 `library-vicinity' in the initialization file.  There are comments in
 the file for how to configure it.
 
-  Once this is done you can modify the startup file for your Scheme
-implementation to `load' this initialization file.  SLIB is then
-installed.
+  Once this is done, modify the startup file for your Scheme
+implementation to `load' this initialization file.
+
+Build New SLIB Catalog for Implementation
+-----------------------------------------
+
+  When SLIB is first used from an implementation, a file named
+`slibcat' is written to the `implementation-vicinity' for that
+implementation.  Because users may lack permission to write in
+`implementation-vicinity', it is good practice to build the new catalog
+when installing SLIB.
+
+  To build (or rebuild) the catalog, start the Scheme implementation
+(with SLIB), then:
+
+     (require 'new-catalog)
+
+Implementation-specific Instructions
+------------------------------------
 
   Multiple implementations of Scheme can all use the same SLIB
 directory.  Simply configure each implementation's initialization file
 as outlined above.
 
-  The SCM implementation does not require any initialization file as
-SLIB support is already built in to SCM.  See the documentation with
-SCM for installation instructions.
+ - Implementation: SCM
+     The SCM implementation does not require any initialization file as
+     SLIB support is already built into SCM.  See the documentation
+     with SCM for installation instructions.
+
+ - Implementation: VSCM
+     From: Matthias Blume <blume @ cs.Princeton.EDU>
+     Date: Tue, 1 Mar 1994 11:42:31 -0500
+
+     Disclaimer: The code below is only a quick hack.  If I find some
+     time to spare I might get around to make some more things work.
+
+     You have to provide `vscm.init' as an explicit command line
+     argument.  Since this is not very nice I would recommend the
+     following installation procedure:
+
+       1. run scheme
+
+       2. `(load "vscm.init")'
+
+       3. `(slib:dump "dumpfile")'
+
+       4. mv dumpfile place-where-vscm-standard-bootfile-resides e.g.
+          mv dumpfile /usr/local/vscm/lib/scheme-boot (In this case
+          vscm should have been compiled with flag
+          -DDEFAULT_BOOTFILE='"/usr/local/vscm/lib/scheme-boot"'.  See
+          Makefile (definition of DDP) for details.)
+
+
+ - Implementation: Scheme48
+     To make a Scheme48 image for an installation under `<prefix>',
+
+       1. `cd' to the SLIB directory
+
+       2. type `make prefix=<prefix> slib48'.
+
+       3. To install the image, type `make prefix=<prefix> install48'.
+          This will also create a shell script with the name `slib48'
+          which will invoke the saved image.
+
+ - Implementation: PLT Scheme
+ - Implementation: DrScheme
+ - Implementation: MzScheme
+     The `init.ss' file in the _slibinit_ collection is an SLIB
+     initialization file.
+
+     To use SLIB in MzScheme, set the SCHEME_LIBRARY_PATH environment
+     variable to the installed SLIB location; then invoke MzScheme thus:
+
+     `mzscheme -L init.ss slibinit'
+
+ - Implementation: MIT Scheme
+     `scheme -load ${SCHEME_LIBRARY_PATH}mitscheme.init'
 
-  SLIB includes methods to create heap images for the VSCM and Scheme48
-implementations.  The instructions for creating a VSCM image are in
-comments in `vscm.init'.  To make a Scheme48 image for an installation
-under `<prefix>', `cd' to the SLIB directory and type `make
-prefix=<prefix> slib48'.  To install the image, type `make
-prefix=<prefix> install48'.  This will also create a shell script with
-the name `slib48' which will invoke the saved image.
+ - Implementation: Guile
+     `guile -l ${SCHEME_LIBRARY_PATH}guile.init'
 
 			 PORTING INSTRUCTIONS
 
@@ -219,10 +323,10 @@ library; this will allow the use of `provide', `provided?', and
 `require' along with the "vicinity" functions.  The rest of the
 library will then be accessible in a system independent fashion.
 
-  Please mail new working configuration files to `jaffer@ai.mit.edu' so
+  Please mail new working configuration files to `agj @ alum.mit.edu' so
 that they can be included in the SLIB distribution.
 
-			   CODING STANDARDS
+			  CODING GUIDELINES
 
   All library packages are written in IEEE P1178 Scheme and assume that
 a configuration file and `require.scm' package have already been