From 1edcb9b62a1a520eddae8403c19d841c9b18737f Mon Sep 17 00:00:00 2001 From: Bryan Newbold Date: Mon, 20 Feb 2017 00:05:24 -0800 Subject: Import Upstream version 5b3 --- Makefile.in | 462 ------------------------------------------------------------ 1 file changed, 462 deletions(-) delete mode 100644 Makefile.in (limited to 'Makefile.in') diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index c2f69c5..0000000 --- a/Makefile.in +++ /dev/null @@ -1,462 +0,0 @@ -# Copyright (C) 1990, 1991, 1992, 1993 Aubrey Jaffer. -*- Makefile -*- -# This file is part of SCM. -# -# SCM is free software; you can redistribute it and/or modify it under -# the terms of the GNU General Public License as published by the -# Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# SCM is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# You should have received a copy of the GNU General Public License -# along with SCM; see the file COPYING. If not, write to the Free -# Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -# -# Makefile for SCM -# - -# Ultrix 2.2 make doesn't expand the value of VPATH. -srcdir = @srcdir@ - -CC = @CC@ - -CFLAGS = @CFLAGS@ -I. -I$(srcdir) -LDFLAGS = @LDFLAGS@ - -# Define these for your system as follows: -# -DRTL To create a run-time library only (no -# interactive front end). -# -DRECKLESS To turn most SCM error schecking off. -# -DCAUTIOUS To always check the number of arguments to -# interpreted closures. -# -DIO_EXTENSIONS To get primitives such as chdir, delete-file, -# file-opisition, and pipes. -# -DPROMPT=\"..\" To change the default prompt. -# -DFLOATS To turn on support for inexact numbers. -# -DSINGLES To use single-precision floats (if a float is -# the same size as a long). -# -DSINGLESONLY To make all inexact real numbers to be single -# precision. Only useful if SINGLES is also -# defined. -# -DGC_FREE_SEGMENTS -# To have all segments of unused heap be freed -# up after garbage collection. Do not define if -# you never want the heap to shrink. -# -DTICKS If you want the ticks and ticks-interrupt -# functions defined. -# -DBRACKETS_AS_PARENS -# To have square brackets read as parentheses -# in forms. -# -DMEMOIZE_LOCALS To speed up most local variable references. -# You will need to remove this and recompile -# eval.c if you use very large or deep -# environments (more than 4095 bound variables -# in one procedure). -# -DENGNOT To use engineering notation instead of -# scientific notation. -# -DSICP To make SCM more compatible with the Scheme used -# in Abelson & Sussman's book. -# -DSTACK_LIMIT To limit the maximum growth of the stack (you -# almost certainly don't want this). -# See also `scmconfig.h' and `scmfig.h'. -defines = @DEFS@ \ - -DCAUTIOUS -DARRAYS -DBIGNUMS -DCCLO \ - -DFLOATS -DIO_EXTENSIONS -DMEMOIZE_LOCALS -DGC_FREE_SEGMENTS - -# If you are using user extension files, change INITS and FINALS -# below. INITS makes up the initialization calls for user extension -# files. FINALS defines the finalization calls for user extension -# files. - -# File INITS FINALS functions defined -# -# sc2.c init_sc2\(\) substring-move-left!, -# substring-move-right!, -# substring-fill!, append!, last-pair -# rgx.c init_rgx\(\) regcomp, regexec (POSIX) -# crs.c init_curses\(\) lendwin\(\) ... lots ... - -INITS = -DINITS=init_sc2\(\)\; -FINALS = -DFINALS=\; - -# If you are using rgx.c, set the next line to point to the include -# directory where your POSIX regexp include files live (if you are using -# GNU regex). -# RGXFLAGS = -I/archive/regex-0.11/ - -# If your system needs extra libraries loaded in, define them here. -# -lm For floating point math (needed). -# -lcurses For crs.c extensions. -# -lncurses For curses on Linux (curses has bugs). -# -lterm{cap,lib} May be required for curses support. -# -lregex For POSIX regexp support (rgx.c). -LOADLIBES = @LIBS@ -lm - -# Any extra object files your system needs. -extras = @LIBOBJS@ - -# Common prefix for machine-independent installed files. -prefix = /usr/local -# Common prefix for machine-dependent installed files. -exec_prefix = $(prefix) - -# Name under which to install SCM. -instname = scm -# Directory to install `scm' in. -bindir = $(exec_prefix)/bin -# Directory in which to install Init.scm, COPYING, and Transcen.scm. -libdir = $(exec_prefix)/lib/scm -# Directory to search by default for included makefiles. -includedir = $(prefix)/include -# Directory to install the Info files in. -infodir = $(prefix)/info -# Directory to install the man page in. -mandir = $(prefix)/man/man$(manext) -# Number to put on the man page filename. -manext = 1 -# Directory to perform pre-install tests in. -testdir = $(srcdir) - -# Program to install `scm'. -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -# Program to install the man page. -INSTALL_DATA = @INSTALL_DATA@ -# Generic install program. -INSTALL = @INSTALL@ - -# Program to format Texinfo source into Info files. -MAKEINFO = makeinfo -# Program to format Texinfo source into DVI files. -TEXI2DVI = texi2dvi - -# Programs to make tags files. -ETAGS = etags -CTAGS = ctags -tw - -# You should not need to change below this line. - -SHELL = /bin/sh -DFLAG = -DIMPLINIT=\"$(libdir)/Init.scm\" -TDFLAG = -DIMPLINIT=\"$(testdir)/Init.scm\" -# nunix = nonunix -nunix = $(srcdir) -# examples = examples -examples = $(srcdir) -ffiles = continue.o time.o repl.o fscl.o sys.o feval.o subr.o sc2.o \ -funif.o rope.o ramap.o findexec.o #rgx.o -fifiles = continue.o time.o repl.o iscm.o fscl.o sys.o feval.o subr.o \ -sc2.o funif.o rope.o ramap.o findexec.o #rgx.o -efiles = time.o repl.o escl.o sys.o eeval.o subr.o sc2.o eunif.o #rgx.o -cfiles = $(srcdir)/scm.c $(srcdir)/time.c $(srcdir)/repl.c \ - $(srcdir)/scl.c $(srcdir)/sys.c $(srcdir)/eval.c \ - $(srcdir)/subr.c $(srcdir)/sc2.c $(srcdir)/unif.c \ - $(srcdir)/rgx.c $(srcdir)/crs.c $(srcdir)/dynl.c $(srcdir)/findexec.c -hfiles = $(srcdir)/scm.h $(srcdir)/scmfig.h scmconfig.h \ - $(srcdir)/setjump.h $(srcdir)/patchlvl.h -ifiles = Init.scm Transcen.scm -tfiles = $(examples)/test.scm $(examples)/example.scm \ - $(examples)/pi.scm $(examples)/pi.c $(examples)/split.scm -dfiles = $(srcdir)/README $(srcdir)/COPYING $(srcdir)/scm.1 \ - $(srcdir)/QUICKREF $(srcdir)/MANUAL $(srcdir)/ChangeLog \ - $(srcdir)/code.doc $(srcdir)/ANNOUNCE -mfiles = Makefile $(nunix)/makefile.msc $(nunix)/makefile.bor \ - $(nunix)/makefile.tur $(nunix)/makefile.djg \ - $(nunix)/makefile.emx $(nunix)/makefile.qc \ - $(nunix)/compile.amiga $(nunix)/link.amiga \ - $(nunix)/makefile.aztec $(nunix)/makefile.ast \ - $(nunix)/makefile.prj $(nunix)/dmakefile \ - $(nunix)/makefile.wcc -vfiles = $(nunix)/setjump.mar $(nunix)/VMSBUILD.COM $(nunix)/VMSGCC.COM -afiles = $(dfiles) $(cfiles) $(hfiles) $(ifiles) $(tfiles) $(mfiles) $(vfiles) - -.SUFFIXES: -.SUFFIXES: .o .c .h .ps .dvi .info .texinfo .scm - -.PHONY: all -all: scm - -# -DINITS= the initialization calls for user extension files. -# -DFINALS= the finalialization calls for user extension files. -dbscm: escm.a sc2.o $(srcdir)/../wb/db.a $(srcdir)/scm.c $(srcdir)/scm.h \ - $(srcdir)/scmfig.h $(srcdir)/patchlvl.h Makefile - $(CC) -o dbscm $(CFLAGS) $(INITS)init_db\(\)\;init_rgx\(\) \ - $(FINALS)final_db\(\) $(defines) $(srcdir)/scm.c \ - escm.a $(srcdir)/../wb/db.a $(LOADLIBES) $(extras) - rm escm.a -curscm: escm.a crs.o - $(CC) -o curscm $(CFLAGS) $(INITS)init_curses\(\)\;init_rgx\(\) \ - $(FINALS)lendwin\(\) $(srcdir)/scm.c crs.o escm.a -lcurses \ - $(LOADLIBES) $(extras) - rm escm.a -dscm: dscm.a main.o - $(CC) -o dscm $(CFLAGS) main.o -ldld -dscm.a: $(efiles) Makefile dynl.o $(srcdir)/scm.c - $(CC) $(CFLAGS) -DRTL $(INITS)init_dynl\(\) -c $(srcdir)/scm.c - ar crvs dscm.a scm.o dynl.o $(efiles) $(LOADLIBES) -dynl.o: $(srcdir)/dynl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - Makefile - $(CC) $(CFLAGS) -DDLD -DRTL -c $(srcdir)/dynl.c - -instscm: $(fifiles) - $(CC) -o instscm $(fifiles) $(LOADLIBES) $(extras) - -scm: $(ffiles) fscm.o - $(CC) -o scm $(ffiles) fscm.o $(LOADLIBES) $(extras) -fscm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h $(srcdir)/patchlvl.h - $(CC) $(CFLAGS) $(TDFLAG) $(defines) -c $(FFLAGS) $(INITS) \ - $(FINALS) $(srcdir)/scm.c - mv scm.o fscm.o - -iscm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h $(srcdir)/patchlvl.h - $(CC) $(CFLAGS) $(DFLAG) $(defines) -c $(FFLAGS) $(INITS) \ - $(FINALS) $(srcdir)/scm.c - mv scm.o iscm.o - -fscl.o: $(srcdir)/scl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(FFLAGS) $(srcdir)/scl.c - mv scl.o fscl.o -feval.o: $(srcdir)/eval.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(FFLAGS) $(srcdir)/eval.c - mv eval.o feval.o -funif.o: $(srcdir)/unif.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(FFLAGS) $(srcdir)/unif.c - mv unif.o funif.o - -escm: $(efiles) escm.o - $(CC) -o escm $(efiles) escm.o $(LOADLIBES) $(extras) -escm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h $(srcdir)/patchlvl.h - $(CC) $(CFLAGS) $(defines) -c $(INITS) $(FINALS) $(srcdir)/scm.c - mv scm.o escm.o -escl.o: $(srcdir)/scl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/scl.c - mv scl.o escl.o -eeval.o: $(srcdir)/eval.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/eval.c - mv eval.o eeval.o -eunif.o: $(srcdir)/unif.c $(srcdir)/scm.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c unif.c - mv unif.o eunif.o - -repl.o: $(srcdir)/repl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - $(srcdir)/setjump.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(TDFLAG) $(srcdir)/repl.c -sys.o: $(srcdir)/sys.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - $(srcdir)/setjump.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/sys.c -continue.o: $(srcdir)/continue.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - $(srcdir)/setjump.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/continue.c -rope.o: $(srcdir)/rope.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - $(srcdir)/setjump.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/rope.c -ramap.o: $(srcdir)/ramap.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - $(srcdir)/setjump.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/ramap.c -time.o: $(srcdir)/time.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/time.c -subr.o: $(srcdir)/subr.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/subr.c -sc2.o: $(srcdir)/sc2.c $(srcdir)/scm.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/sc2.c -rgx.o: $(srcdir)/rgx.c $(srcdir)/scm.h Makefile scmconfig.h - $(CC) $(CFLAGS) $(defines) $(RGXFLAGS) -c rgx.c -crs.o: $(srcdir)/crs.c $(srcdir)/scm.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c crs.c -findexec.o: $(srcdir)/findexec.c - $(CC) $(CFLAGS) $(defines) -c $(srcdir)/findexec.c - -both: scm escm - -$(srcdir)/proto.h: $(cfiles) - rm -f $(srcdir)/proto.h - mkproto $(cfiles) > $(srcdir)/proto.h - -libscm.a: rtlscm.o $(ffiles) - rm -f libscm.a - ar rc libscm.a rtlscm.o $(ffiles) - $(RANLIB) libscm.a - -rtlscm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \ - $(srcdir)/patchlvl.h scmconfig.h - $(CC) $(CFLAGS) $(defines) -c $(FFLAGS) -DRTL $(INITS)init_user_scm\(\) \ - $(FINALS) $(srcdir)/scm.c - mv scm.o rtlscm.o - -.PHONY: install installdirs -install: installdirs \ - $(bindir)/$(instname) $(mandir)/$(instname).$(manext) \ - $(libdir)/Init.scm $(libdir)/Transcen.scm $(libdir)/COPYING - -installdirs: - $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) \ - $(mandir) $(libdir) - -$(bindir)/$(instname): instscm - $(INSTALL_PROGRAM) instscm $@.new -# Some systems can't deal with renaming onto a running binary. - -rm -f $@.old - -mv $@ $@.old - mv $@.new $@ - -$(mandir)/$(instname).$(manext): $(srcdir)/scm.1 - $(INSTALL_DATA) $(srcdir)/scm.1 $@ - -$(libdir)/Init.scm: $(srcdir)/Init.scm - $(INSTALL_DATA) $(srcdir)/Init.scm $@ - -$(libdir)/Transcen.scm: $(srcdir)/Transcen.scm - $(INSTALL_DATA) $(srcdir)/Transcen.scm $@ - -$(libdir)/COPYING: $(srcdir)/COPYING - $(INSTALL_DATA) $(srcdir)/COPYING $@ - -.PHONY: tar shar dclshar com zip pubzip -tar: scm.tar -shar: scm.shar -dclshar: scm.com -com: scm.com -zip: scm.zip -scm.tar: temp/scm - cd temp; tar chf ../scm.tar scm - chmod 664 scm.tar -scm.shar: temp/scm - cd temp; shar scm >../scm.shar - chmod 664 scm.shar -scm.com: temp/scm - cd temp; dclshar scm >../scm.com - chmod 664 scm.com -scm.zip: temp/scm - cd temp; zip -r ../scm.zip scm - chmod 664 scm.zip -pubzip: temp/scm - cd temp; zip -ru ../../pub/scm.zip scm - chmod 664 ../pub/scm.zip - -temp/scm: $(afiles) - -rm -rf temp - mkdir temp - mkdir temp/scm - ln $(afiles) temp/scm - -.PHONY: dist tar.Z tar.gz shar.Z -dist: tar.gz -tar.Z: scm.tar.Z -tar.gz: scm.tar.gz -shar.Z: scm.shar.Z -scm.tar.Z: scm.tar - -rm -f scm.tar.Z - compress scm.tar - chmod 664 scm.tar.Z -scm.tar.gz: scm.tar - -rm -f scm.tar.gz - gzip scm.tar - chmod 664 scm.tar.gz -scm.shar.Z: scm.shar - -rm -f scm.shar.Z - compress scm.shar - chmod 664 scm.shar.Z - -.PHONY: pubdiffs distdiffs -pubdiffs: temp/scm - mv temp/scm temp/nscm - cd temp;unzip ../../pub/scm.zip - -rm -f scm.diffs - -diff -c temp/scm temp/nscm > scm.diffs - -rm -rf temp - ls -l scm.diffs -distdiffs: temp/scm - mv temp/scm temp/nscm - cd temp;zcat ../../dist/scm*.tar.gz | tar xvf - - -rm -f scm.pat - -diff -c temp/scm temp/nscm > scm.pat - -rm -rf temp - ls -l scm.pat - -.PHONY: checks check echeck -checks: check echeck -check: ./scm test.scm - echo '(test-sc4)(test-cont)(test-inexact)(gc)(exit (length errs))' \ - | ./scm test.scm -echeck: ./escm test.scm - echo '(test-sc4)(test-cont)(gc)(exit (length errs))' \ - | ./escm test.scm - -.PHONY: lint -lint: lints -lints: $(cfiles) $(hfiles) - lint $(CFLAGS) $(cfiles) | tee lints -# lint $(CFLAGS) $(cfiles) | tee lintes - -# Seds to help find names not unique in first 8 characters (name8s). -# for BSD nm format -# SED_TO_STRIP_NM = sed -e '/.*\.o$$/d' -e 's/.* _//' -e 's/.* T //' -#old, bad for T [^_] on suns: SED_TO_STRIP_NM=sed -e '/.*\.o$$/d' -e 's/.* _//' -# For a System V nm where plain C identifiers have _ prepended: -#SED_TO_STRIP_NM = sed -e '/^_[A-Za-z][A-za-z0-9_]*[ |].*|extern|!d' -e 's/|/ /g' -e 's/^_//' -# For a System V nm where plain C identifiers have nothing prepended: -#SED_TO_STRIP_NM = sed -e '/^[A-Za-z][A-za-z0-9_]*[ |].*|extern|!d' -e 's/|/ /g' -SED_TO_STRIP_NM = : - -.PHONY: name8 -name8: name8s -name8s: scm - nm scm |\ - $(SED_TO_STRIP_NM) |\ - sort -u|\ - awk '{ if (substr(l,1,8)==substr($$1,1,8)) {\ - if (p) print l;\ - print $$1;p=0;stat=1\ - }else p=1;\ - l=$$1\ - }END{exit stat}' - |\ - tee name8s - -tagsrcs = $(hfiles) $(cfiles) $(ifiles) $(mfiles) $(vfiles) \ - MANUAL code.doc README -TAGS: $(tagsrcs) - $(ETAGS) $(tagsrcs) -tags: $(tagsrcs) - $(CTAGS) $(tagsrcs) - -.PHONY: clean cleanish realclean -clean: - -rm -f *~ \#* *.o *\# *.orig *.rej a.out core lints tmp* - -rm -rf temp hobtemp -cleanish: - -rm -f *~ \#* *\# *.orig *.rej a.out core lints tmp* - -rm -rf temp hobtemp -distclean: - -rm -f *~ \#* *.o *\# *.orig *.rej a.out core TAGS lints tmp* \ - scmconfig.h config.status - -rm -rf temp hobtemp - -Makefile: config.status $(srcdir)/Makefile.in - $(SHELL) config.status -scmconfig.h: stamp-config ; -stamp-config: config.status $(srcdir)/scmconfig.h.in - $(SHELL) config.status - touch stamp-config - -configure: configure.in - autoconf $(ACFLAGS) -scmconfig.h.in: configure.in - autoheader $(ACFLAGS) - -# This tells versions [3.59,3.63) of GNU make not to export all variables. -.NOEXPORT: - -# Automatically generated dependencies will be put at the end of the file. -- cgit v1.2.3