Import Debian changes 5d6-3.2debian/5d6-3.2

scm (5d6-3.2) unstable; urgency=low

  * Fix hppa compile.  Closes: #144062

scm (5d6-3.1) unstable; urgency=low

  * NMU with patch from James Troup, to fix FTBFS on sparc. Closes: #191171

scm (5d6-3) unstable; urgency=low

  * Add build depend on xlibs-dev (Closes: #148020)

scm (5d6-2) unstable; urgency=low

  * Remove libregexx-dev from build-depends.
  * Change build to use ./scmlit rather than scmlit (should fix some build
    problems) (looks like alpha is mostly building)
  * New release (Closes: #140175)
  * Built with turtlegraphics last time (Closes: #58515)

scm (5d6-1) unstable; urgency=low

  * New upstream.
  * Add xlib and turtlegr to requested list of features. (closes
    some bug)
  * Make clean actually clean most everything up.
  * Remove hacks renaming build to something else and just set build as a
    .PHONY target in debian/rules.
  * Add the turtlegr code.

scm (5d5-1) unstable; urgency=low

  * New upstream
  * Has fixes for 64 bit archs.  May fix alpha compile problem.  Does fix
    (Closes: #140175)
  * Take out -O2 arg.

scm (5d4-3) unstable; urgency=low

  * Don't link with regexx, but just use libc6's regular expression
    functions.
  * Define (terms) to output /usr/share/common-licenses/GPL (Closes:
    #119321) 

scm (5d4-2) unstable; urgency=low

  * Add texinfo to build depends (Closes: #107011)

scm (5d4-1) unstable; urgency=low

  * New upstream release.
  * Move install-info --remove to prerm.

scm (5d3-5) unstable; urgency=low

  * Move scm info files to section "The Algorithmic Language Scheme" to
    match up with guile.

scm (5d3-4) unstable; urgency=low

  * Fix build depends (Closes: #76691)

scm (5d3-3) unstable; urgency=low

  * Fix path in scm dhelp file.

scm (5d3-2) unstable; urgency=low

  * Actually put the header files in the package.  Oops.

scm (5d3-1) unstable; urgency=low

  * New upstream. (Closes: #74761)
  * Make (terms) use new license location.
  * Make use libregexx rather than librx.
  * Fix build depends for above.
  * Using new regex lib seems to fix crash (Closes: #66787)
  * Consider adding scm-dev package with headers, but instead just add the
    headers to the scm package. (Closes: #70787)
  * Add doc-base support.

1 files changed, 117 insertions, 117 deletions

diff --git a/scm.doc b/scm.doc
index 03488a5..2367bc0 100644
--- a/scm.doc
+++ b/scm.doc
@@ -1,49 +1,50 @@
 
 
 
-SCM(Dec 5 1998)                                   SCM(Dec 5 1998)
+SCM(Jan 4 2000)                                   SCM(Jan 4 2000)
 
 
 NAME
        scm - a Scheme Language Interpreter
 
 SYNOPSIS
-       scm  [-a  kbytes ] [-ibvqmu] [-p number ] [-c expression ]
-       [-e expression ] [-f filename ] [-l filename ]  [-d  file-
-       name  ]  [-r feature ] [-- | - | -s] [filename] [arguments
-       ...]
+       scm [-a kbytes ] [-muvqib] [--version] [--help]
+       [[-]-no-init-file] [-p int ] [-r feature ] [-h feature ]
+       [-d filename ] [-f filename ] [-l filename ]
+       [-c expression ] [-e expression ] [-o dumpname ]
+       [-- | - | -s] [ filename ] [ arguments ...  ]
 
 DESCRIPTION
        Scm is a Scheme interpreter.
 
-       Upon startup scm loads the file specified by by the  envi-
-       ronment   variable   SCM_INIT_PATH  or  by  the  parameter
+       Upon  startup scm loads the file specified by by the envi-
+       ronment  variable  SCM_INIT_PATH  or  by   the   parameter
        IMPLINIT in the makefile (or scmfig.h) if SCM_INIT_PATH is
-       not  defined.   The  makefiles  attempt to set IMPLINIT to
+       not defined.  The makefiles attempt  to  set  IMPLINIT  to
        "Init.scm" in the source directory.
 
-       Unless the option  -no-init-file  occurs  in  the  command
-       line,   "Init.scm"   checks   to  see  if  there  is  file
-       "ScmInit.scm" in the path  specified  by  the  environment
-       variable  HOME  (or  in  the  current directory if HOME is
+       Unless  the  option -no-init-file or --no-init-file occurs
+       in the command line, "Init.scm" checks to see if there  is
+       file  "ScmInit.scm"  in the path specified by the environ-
+       ment variable HOME (or in the current directory if HOME is
        undefined).  If it finds such a file it is loaded.
 
-       "Init.scm" then looks for command input from one of  three
-       sources:  From  an option on the command line, from a file
+       "Init.scm"  then looks for command input from one of three
+       sources: From an option on the command line, from  a  file
        named on the command line, or from standard input.
 
 
 OPTIONS
-       The options are processed in the order  specified  on  the
+       The  options  are  processed in the order specified on the
        command line.
 
        -akbytes
-            specifies  that  scm should allocate an initial heap-
+            specifies that scm should allocate an  initial  heap-
             size of kbytes.  This option, if present, must be the
             first on the command line.
 
        -no-init-file
-            Inhibits  the  loading  of "ScmInit.scm" as described
+            Inhibits the loading of  "ScmInit.scm"  as  described
             above.
 
        -eexpression
@@ -51,13 +52,12 @@ OPTIONS
        -cexpression
             specifies that the scheme expression expression is to
             be evaluated.  These options are inspired by perl and
-            sh respectively.  On Amiga systems the entire  option
-            and  argument  need  to  be  enclosed in qoutes.  For
+            sh  respectively.  On Amiga systems the entire option
+            and argument need to  be  enclosed  in  qoutes.   For
             instance "-e(newline)".
 
        -rfeature
             requires feature.  This will load a file from SLIB if
-            that feature is not already supported.  If feature is
 
 
 
@@ -67,103 +67,118 @@ OPTIONS
 
 
 
-SCM(Dec 5 1998)                                   SCM(Dec 5 1998)
+SCM(Jan 4 2000)                                   SCM(Jan 4 2000)
 
 
-            2, 3, 4, or 5 scm will require the  features  necces-
-            sary  to  support  R2RS, R3RS, R4RS, or R5RS, respec-
+            that feature is not already supported.  If feature is
+            2,  3,  4, or 5 scm will require the features necces-
+            sary to support R2RS, R3RS, R4RS,  or  R5RS,  respec-
             tively.
 
+       -hfeature
+            provides feature.
+
        -lfilename
 
        -ffilename
             loads filename.  Scm will load the first (unoptioned)
-            file  named on the command line if no -c, -e, -f, -l,
+            file named on the command line if no -c, -e, -f,  -l,
             or -s option preceeds it.
 
        -dfilename
-            opens (read-only) the  extended  relational  database
-            filename.   If filename contains initialization code,
+            opens  (read-only)  the  extended relational database
+            filename.  If filename contains initialization  code,
             it will be run when the database is opened.
 
+       -odumpname
+            saves  the current SCM session as the executable pro-
+            gram dumpname.  This option works only in SCM  builds
+            supporting dump.
+
+            If  options appear on the command line after -o dump-
+            name, then the saved session will continue with  pro-
+            cessing  those options when it is invoked.  Otherwise
+            the (new) command line is processed as usual when the
+            saved image is invoked.
+
        -plevel
-            sets the prolixity (verboseness) to level.   This  is
+            sets  the  prolixity (verboseness) to level.  This is
             the same as the scm command (verobse level ).
 
        -v   (verbose mode) specifies that scm will print prompts,
-            evaluation  times,  notice  of  loading  files,   and
-            garbage  collection  statistics.  This is the same as
+            evaluation   times,  notice  of  loading  files,  and
+            garbage collection statistics.  This is the  same  as
             -p3.
 
-       -q   (quiet mode) specifies that scm will print  no  extra
+       -q   (quiet  mode)  specifies that scm will print no extra
             information.  This is the same as -p0.
 
-       -m   specifies  that  subsequent  loads,  evaluations, and
+       -m   specifies that  subsequent  loads,  evaluations,  and
             user interactions will be with R4RS macro capability.
             To use a specific R4RS macro implementation from SLIB
             (instead  of  SLIB's  default)  put  -r  macropackage
             before -m on the command line.
 
-       -u   specifies  that  subsequent  loads,  evaluations, and
+       -u   specifies that  subsequent  loads,  evaluations,  and
             user interactions will be without R4RS macro capabil-
             ity.  R4RS macro capability can be restored by a sub-
             sequent -m on the command line or from Scheme code.
 
-       -i   specifies that scm should  run  interactively.   That
-            means that scm will not terminate until the (quit) or
-            (exit) command is given, even if  there  are  errors.
-            It  also  sets the prolixity level to 2 if it is less
-            than 2.  This will print prompts,  evaluation  times,
-            and notice of loading files.  The prolixity level can
-            be set by subsequent options.  If scm is started from
-            a  tty,  it will assume that it should be interactive
-            unless given a subsequent -b option.
 
-       -b   specifies  that  scm  should  run  non-interactively.
-            That  means  that scm will terminate after processing
-            the command line or if there are errors.
 
-       -s   specifies, by analogy with sh, that  further  options
 
+                                                                2
 
 
-                                                                2
 
 
 
+SCM(Jan 4 2000)                                   SCM(Jan 4 2000)
 
 
-SCM(Dec 5 1998)                                   SCM(Dec 5 1998)
+       -i   specifies  that  scm  should run interactively.  That
+            means that scm will not terminate until the (quit) or
+            (exit)  command  is  given, even if there are errors.
+            It also sets the prolixity level to 2 if it  is  less
+            than  2.   This will print prompts, evaluation times,
+            and notice of loading files.  The prolixity level can
+            be set by subsequent options.  If scm is started from
+            a tty, it will assume that it should  be  interactive
+            unless given a subsequent -b option.
 
+       -b   specifies  that  scm  should  run  non-interactively.
+            That means that scm will terminate  after  processing
+            the command line or if there are errors.
 
+       -s   specifies,  by  analogy with sh, that further options
             are to be treated as program aguments.
 
-       -    --  specifies  that  there are no more options on the
+       -    -- specifies that there are no more  options  on  the
             command line.
 
 ENVIRONMENT VARIABLES
        SCM_INIT_PATH
-            is the pathname where scm will look for its  initial-
-            ization  code.  The default is the file "Init.scm" in
+            is  the pathname where scm will look for its initial-
+            ization code.  The default is the file "Init.scm"  in
             the source directory.
 
        SCHEME_LIBRARY_PATH
             is the SLIB Scheme library directory.
 
-       HOME is the directory where "Init.scm" will look  for  the
+       HOME is  the  directory where "Init.scm" will look for the
             user initialization file "ScmInit.scm".
 
 SCHEME VARIABLES
        *argv*
             contains  the  list  of  arguments  to  the  program.
-            *argv* can change during argument  processing.   This
-            list  is  suitable  for  use  as  an argument to SLIB
+            *argv*  can  change during argument processing.  This
+            list is suitable for  use  as  an  argument  to  SLIB
             getopt.
 
        *R4RS-macro*
             controls whether loading and interaction support R4RS
             macros.  Define this in "ScmInit.scm" or files speci-
-            fied on the command line.  This can be overridden  by
+            fied  on the command line.  This can be overridden by
             subsequent -m and -u options.
 
        *interactive*
@@ -173,39 +188,41 @@ SCHEME VARIABLES
             subsequent -i and -b options.
 
 EXAMPLES
-       % scm foo.scm arg1 arg2 arg3
-            Load and execute the contents of foo.scm.  Parameters
-            arg1  arg2  and  arg3  are  stored in the global list
-            *argv*.
 
-       % scm -f foo.scm arg1 arg2 arg3
-            The same.
 
-       % scm -s foo.scm arg1 arg2
-            Set *argv* to ("foo.scm"  "arg1"  "arg2")  and  enter
-            interactive session.
 
-       % scm -e '(display (list-ref *argv* *optind*))' bar
-            Print ``bar''
 
-       % scm -rpretty-print -r format -i
-            Load  pretty-print  and  format and enter interactive
+
+                                                                3
 
 
 
-                                                                3
 
 
+SCM(Jan 4 2000)                                   SCM(Jan 4 2000)
 
 
+       % scm foo.scm arg1 arg2 arg3
+            Load and execute the contents of foo.scm.  Parameters
+            arg1 arg2 and arg3 are  stored  in  the  global  list
+            *argv*.
 
-SCM(Dec 5 1998)                                   SCM(Dec 5 1998)
+       % scm -f foo.scm arg1 arg2 arg3
+            The same.
+
+       % scm -s foo.scm arg1 arg2
+            Set  *argv*  to  ("foo.scm"  "arg1" "arg2") and enter
+            interactive session.
 
+       % scm -e '(display (list-ref *argv* *optind*))' bar
+            Print ``bar''
 
+       % scm -rpretty-print -r format -i
+            Load pretty-print and format  and  enter  interactive
             mode.
 
        % scm -r5
-            Load dynamic-wind, values, and R4RS macros and  enter
+            Load  dynamic-wind, values, and R4RS macros and enter
             interactive (with macros) mode.
 
        % scm -r5 -r4
@@ -213,73 +230,73 @@ SCM(Dec 5 1998)                                   SCM(Dec 5 1998)
             loaded.
 
 FEATURES
-       Runs under Amiga, Atari-ST, MacOS, MS-DOS,  OS/2,  NOS/VE,
-       Unicos,  VMS, Unix and similar systems.  Support for ASCII
+       Runs  under  Amiga, Atari-ST, MacOS, MS-DOS, OS/2, NOS/VE,
+       Unicos, VMS, Unix and similar systems.  Support for  ASCII
        and EBCDIC character sets.
 
-       Conforms to Revised^5 Report on the  Algorithmic  Language
+       Conforms  to  Revised^5 Report on the Algorithmic Language
        Scheme and the IEEE P1178 specification.
 
        Support for SICP, R2RS, R3RS, and R4RS scheme code.
 
        Many Common Lisp functions: logand, logor, logxor, lognot,
-       ash,  logcount,  integer-length,  bit-extract,   defmacro,
-       macroexpand,  macroexpand1, gentemp, defvar, force-output,
-       software-type,  get-decoded-time,   get-internal-run-time,
+       ash,   logcount,  integer-length,  bit-extract,  defmacro,
+       macroexpand, macroexpand1, gentemp, defvar,  force-output,
+       software-type,   get-decoded-time,  get-internal-run-time,
        get-internal-real-time,  delete-file,  rename-file,  copy-
        tree, acons, and eval.
 
-       Char-code-limit,   most-positive-fixnum,    most-negative-
-       fixnum,   and   internal-time-units-per-second  constants.
+       Char-code-limit,    most-positive-fixnum,   most-negative-
+       fixnum,  and   internal-time-units-per-second   constants.
        *Features* and *load-pathname* variables.
 
-       Arrays and bit-vectors.  String ports and software  emula-
-       tion  ports.   I/O extensions providing most of ANSI C and
+       Arrays  and bit-vectors.  String ports and software emula-
+       tion ports.  I/O extensions providing most of ANSI  C  and
        POSIX.1 facilities.
 
-       User definable responses to interrupts  and  errors,  Pro-
-       cess-syncronization  primitives, String regular expression
-       matching, and the CURSES screen management package.
+       User  definable  responses  to interrupts and errors, Pro-
+       cess-syncronization primitives, String regular  expression
 
-       Available add-on packages including an interactive  debug-
-       ger, database, X-window graphics, BGI graphics, Motif, and
-       Open-Windows packages.
 
-       A compiler  (HOBBIT,  available  separately)  and  dynamic
-       linking of compiled modules.
 
-       Setable   levels  of  monitoring  and  timing  information
-       printed interactively (the `verbose' function).   Restart,
-       quit, and exec.
+                                                                4
 
-FILES
-       scm.texi
-              Texinfo documentation of scm enhancements, internal
-              representations, and how to extend or  include  scm
 
 
 
-                                                                4
 
+SCM(Jan 4 2000)                                   SCM(Jan 4 2000)
 
 
+       matching, and the CURSES screen management package.
 
+       Available  add-on packages including an interactive debug-
+       ger, database, X-window graphics, BGI graphics, Motif, and
+       Open-Windows packages.
 
-SCM(Dec 5 1998)                                   SCM(Dec 5 1998)
+       A  compiler  (HOBBIT,  available  separately)  and dynamic
+       linking of compiled modules.
 
+       Setable  levels  of  monitoring  and  timing   information
+       printed  interactively (the `verbose' function).  Restart,
+       quit, and exec.
 
+FILES
+       scm.texi
+              Texinfo documentation of scm enhancements, internal
+              representations,  and  how to extend or include scm
               in other programs.
 
 AUTHORS
-       Aubrey Jaffer (jaffer @ ai.mit.edu)
-       Radey Shouman (Radey.Shouman @ splashtech.com)
+       Aubrey Jaffer (jaffer @ alum.mit.edu)
+       Radey Shouman (shouman @ ne.mediaone.net)
 
 BUGS
 SEE ALSO
        The SCM home-page:
        http://swissnet.ai.mit.edu/~jaffer/SCM.html
 
-       The  Scheme  specifications for details on specific proce-
+       The Scheme specifications for details on  specific  proce-
        dures  (http://swissnet.ai.mit.edu/ftpdir/scheme-reports/)
        or
 
@@ -308,23 +325,6 @@ SEE ALSO
 
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
                                                                 5