Import Upstream version 5b3upstream/5b3

1 files changed, 0 insertions, 182 deletions

diff --git a/README.unix b/README.unix
deleted file mode 100644
index 0f9094d..0000000
--- a/README.unix
+++ /dev/null
@@ -1,182 +0,0 @@
-This file contains the instructions for building scm4e under Unix
-systems.  Scm conforms to Revised^4 Report on the Algorithmic Language
-Scheme and the IEEE P1178 specification.  Scm runs under VMS, MS-DOS,
-OS2, MacOS, Amiga, Atari-ST, NOS/VE, Unix and similar systems.
- 
-The author of scm can be reached at <jaffer@ai.mit.edu> or
-Aubrey Jaffer, 84 Pleasant St., Wakefield MA 01880.
-
-The Unix installation support included in this scmconfig distribution
-has been written by myself, Bryan O'Sullivan <bosullvn@maths.tcd.ie>,
-and is maintained by me.  Please direct any problems you have with
-either scm itself or this configuration software to <bug-scm@scrg.cs.tcd.ie>.
-
-NOTE: Before you get started, make sure that you have unpacked this
-      scmconfig distribution into the whatever directory you have
-      unpacked the same version of scm.
-
-Several chunks of this file have been lifted more or less verbatim
-from the standard INSTALL file which comes with most GNU utilities
-these days.
-
-			       MANIFEST
-
-  `README.unix' is this file.  It contains a MANIFEST, INSTALLATION
-	INSTRUCTIONS, TROUBLESHOOTING, and various other information.
-  `COPYING' details the LACK OF WARRANTY for scmconfig and scm and the
-	conditions for distributing scm and scmconfig.
-  `acconfig-1.5.h' is a temporary fix for a bug in version 1.5 of GNU
-	autoconf.  This file should not concern you unless you are
-	familiar with autoconf (you don't need to be).
-  `configure' is an executable shell script which generates
-	`scmconfig.h' and `Makefile'.
-  `configure.in' is a template file used by with autoconf (autoconf is
-	not needed to build scm), which produces the `configure'
-	script.
-  `scmconfig.h.in' is an automatically-generated template file used by
-	configure, which produces `scmconfig.h'.
-  `Makefile.in' is a template file used by configure, which produces
-	`Makefile'.
-
-		      INSTALLATION INSTRUCTIONS
-
-To compile this package:
-
-1.  In the directory that this file is in, type `./configure'.  If
-    you're using `csh' on an old version of System V, you might need
-    to type `sh configure' instead to prevent `csh' from trying to
-    execute `configure' itself.
-
-    You may wish to edit the generated `Makefile' file in order to
-    customise scm to your own preferences.  The comments in there
-    should be adequate to let you decide what you want to do.
-    `Makefile' has a reasonable set of defaults for most Unix systems,
-    so you may not have to edit it at all.
-
-[You can skip the rest of this section (down to point 2 below) the
- first time around.]
-
-    The `configure' shell script attempts to guess correct values for
-    various system-dependent variables used during compilation, and
-    creates the Makefile.
-
-    Running `configure' takes a minute or two.  While it is running,
-    it prints some messages that tell what it is doing.  If you don't
-    want to see the messages, run `configure' with its standard output
-    redirected to `/dev/null'; for example, `./configure >/dev/null'.
-
-    To compile the package in a different directory from the one
-    containing the source code, you must use a version of `make' that
-    supports the VPATH variable, such as GNU `make'.  `cd' to the
-    directory where you want the object files and executables to go
-    and run `configure'.  `configure' automatically checks for the
-    source code in the directory that `configure' is in and in `..'.
-    If for some reason `configure' is not in the source code directory
-    that you are configuring, then it will report that it can't find
-    the source code.  In that case, run `configure' with the option
-    `--srcdir=DIR', where DIR is the directory that contains the
-    source code.
-
-    See the section titled `INSTALL' below on building scm with
-    different default search paths.  By default, when you run `make',
-    scm looks in the source directory for `Init.scm'.  The binary
-    which is built when you run `make install' looks in the correct
-    places for files.
-
-    Another `configure' option is useful mainly in `Makefile' rules
-    for updating `config.status' and `Makefile'.  The `--no-create'
-    option figures out the configuration for your system and records
-    it in `config.status', without actually configuring the package
-    (creating `Makefile's and perhaps a configuration header file).
-    Later, you can run `./config.status' to actually configure the
-    package.  You can also give `config.status' the `--recheck'
-    option, which makes it re-run `configure' with the same arguments
-    you used before.  This option is useful if you change `configure'.
-
-    `configure' ignores any other arguments that you give it.
-
-    If your system requires unusual options for compilation or linking
-    that `configure' doesn't know about, you can give `configure'
-    initial values for some variables by setting them in the
-    environment.  In Bourne-compatible shells, you can do that on the
-    command line like this:
-	CC='gcc -traditional' DEFS=-D_POSIX_SOURCE ./configure
-
-2.  Type `make' to compile the package.  If you want, you can override
-    the `make' variables CFLAGS and LDFLAGS like this:
-	make CFLAGS=-O2 LDFLAGS=-s
-
-3.  Test scm.  This is done in the following way (user input comes
-    after the `bash$' and `>' prompts):
-	bash$ scm
-	SCM version xxx, Copyright (C) 1990, 1991, 1992, 1993 Aubrey Jaffer.
-	SCM comes with ABSOLUTELY NO WARRANTY; for details type `(terms)'.
-	This is free software, and you are welcome to redistribute it
-	under certain conditions; type `(terms)' for details.
-	;loading ".../Transcen.scm"
-	;done loading ".../Transcen.scm"
-	;Evaluation took 230 mSec (0 in gc) 8661 cons work
-	> (load "test.scm")
-	...
-	> (test-sc4)
-	...
-	> (test-cont)
-	...
-	> (test-inexact)
-
-4.  You can remove the program binaries and object files from the
-    source directory by typing `make clean'.  To also remove the
-    Makefile(s), the header file containing system-dependent definitions
-    (if the package uses one), and `config.status' (all the files that
-    `configure' created), type `make distclean'.
-
-[You can skip this next bit unless you are editing the `configure.in'
- file, which you should not do unless you are familiar with autoconf.]
-
-    If you are using versions of autoconf before or including 1.5, you
-    should rename `acconfig-1.5.h' to `acconfig.h' before running
-    autoheader, since these distributions do not handle
-    `TIME_WITH_SYS_TIME' correctly.
-
-			       INSTALL
-
-Type `make install' to install programs, data files, and
-documentation.
-
-By default, `make install' will install the package's files in
-/usr/local/bin, /usr/local/lib, /usr/local/man, etc.  You can specify
-an installation prefix other than /usr/local by giving `configure' the
-option `--prefix=PATH'.  Alternately, you can do so by consistently
-giving a value for the `prefix' variable when you run `make', e.g.,
-	make prefix=/usr/gnu
-	make prefix=/usr/gnu install
-
-You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If
-you give `configure' the option `--exec-prefix=PATH' or set the `make'
-variable `exec_prefix' to PATH, the package will use PATH as the
-prefix for installing programs and libraries.  Data files and
-documentation will still use the regular prefix.  Normally, all files
-are installed using the regular prefix.
-
-			   TROUBLESHOOTING
-
-If you encounter any problems while building scm, please send
-electronic mail to <bug-scm@scrg.cs.tcd.ie> with a description of the
-problem, and any solution to it you may have found.  Some mention of
-the version of Unix you are trying to build scm on, and the versions
-of scm and scmconfig you are using, would be helpful in diagnosing the
-problem.
-
-If you encounter any problems with system include files not being
-found, or attempts being made to read the wrong files, please contact
-<bug-scm@scrg.cs.tcd.ie> with a description of the include files that
-are not being handled correctly; the problem probably lies in the
-autoconf support, and can usually be quickly fixed by manually editing
-`scmconfig.h'.
-
-If you find that scm does not link because it cannot find a
-time-related function, please mail a description of the problem to
-<bug-scm@scrg.cs.tcd.ie>, stating which function(s) can't be found.
-In the mean time, editing the top of `time.c' should provide a fix for
-the problem.