Import Debian changes 5b3-1debian/5b3-1

scm (5b3-1) unstable; urgency=low

  * New maintainer
  * New version
  * libc6

1 files changed, 0 insertions, 467 deletions

diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index db0864b..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,467 +0,0 @@
-# Copyright (C) 1990, 1991, 1992, 1993 Aubrey Jaffer.	-*- Makefile -*-
-# This file is part of SCM.
-# 
-# SCM is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# SCM is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
-# License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with SCM; see the file COPYING.  If not, write to the Free
-# Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-#
-# Makefile for SCM
-#
-
-# Ultrix 2.2 make doesn't expand the value of VPATH.
-srcdir = @srcdir@
-
-CC = @CC@
-
-CFLAGS = @CFLAGS@ -I. -I$(srcdir)
-LDFLAGS = @LDFLAGS@
-
-# Define these for your system as follows:
-#	-DRTL		To create a run-time library only (no
-#			interactive front end).
-#	-DRECKLESS	To turn most SCM error schecking off.
-#	-DCAUTIOUS	To always check the number of arguments to
-#			interpreted closures.
-#	-DIO_EXTENSIONS	To get primitives such as chdir, delete-file,
-#			file-opisition, and pipes.
-#	-DPROMPT=\"..\"	To change the default prompt.
-#	-DFLOATS	To turn on support for inexact numbers.
-#	-DSINGLES	To use single-precision floats (if a float is
-#			the same size as a long).
-#	-DSINGLESONLY	To make all inexact real numbers to be single
-#			precision.  Only useful if SINGLES is also
-#			defined.
-#	-DGC_FREE_SEGMENTS
-#			To have all segments of unused heap be freed
-#			up after garbage collection.  Do not define if
-#			you never want the heap to shrink.
-#	-DTICKS		If you want the ticks and ticks-interrupt
-#			functions defined.
-#	-DBRACKETS_AS_PARENS
-#			To have square brackets read as parentheses
-#			in forms.
-#	-DMEMOIZE_LOCALS To speed up most local variable references.
-#			You will need to remove this and recompile
-#			eval.c if you use very large or deep
-#			environments (more than 4095 bound variables
-#			in one procedure).
-#	-DENGNOT	To use engineering notation instead of
-#			scientific notation.
-#	-DSICP		To make SCM more compatible with the Scheme used
-#			in Abelson & Sussman's book.
-#	-DSTACK_LIMIT	To limit the maximum growth of the stack (you
-#			almost certainly don't want this).
-# See also `scmconfig.h' and `scmfig.h'.
-defines = @DEFS@ \
-	-DCAUTIOUS -DARRAYS -DBIGNUMS -DCCLO \
-	-DFLOATS -DIO_EXTENSIONS -DMEMOIZE_LOCALS -DGC_FREE_SEGMENTS
-
-# If you are using user extension files, change INITS and FINALS
-# below.  INITS makes up the initialization calls for user extension
-# files.  FINALS defines the finalization calls for user extension
-# files.
-
-# File	INITS		FINALS		functions defined
-#
-# sc2.c	init_sc2\(\)			substring-move-left!,
-#					substring-move-right!,
-#					substring-fill!, append!, last-pair
-# rgx.c	init_rgx\(\)			regcomp, regexec (POSIX)
-# crs.c	init_curses\(\) lendwin\(\)	... lots ...
-
-#INITS = -DINITS=init_sc2\(\)\;init_rgx\(\)\;init_crs\(\)\;init_edline\(\)\;
-INITS = -DINITS=init_sc2\(\)\;init_rgx\(\)\;
-#FINALS = -DFINALS=lendwin\(\)\;
-FINALS = -DFINALS=\;
-
-# If you are using rgx.c, set the next line to point to the include
-# directory where your POSIX regexp include files live (if you are using
-# GNU regex).
-RGXFLAGS = -I/usr/include/regex
-
-# If your system needs extra libraries loaded in, define them here.
-#	-lm		For floating point math (needed).
-#	-lcurses	For crs.c extensions.
-#	-lncurses	For curses on Linux (curses has bugs).
-#	-lterm{cap,lib}	May be required for curses support.
-#	-lregex		For POSIX regexp support (rgx.c).
-#LOADLIBES = @LIBS@ -lm -lregex -lncurses -lreadline
-LOADLIBES = @LIBS@ -lm -lregex
-
-# Any extra object files your system needs.
-extras = @LIBOBJS@
-
-# Common prefix for machine-independent installed files.
-prefix = /usr/local
-# Common prefix for machine-dependent installed files.
-exec_prefix = $(prefix)
-
-# Name under which to install SCM.
-instname = scm
-# Directory to install `scm' in.
-bindir = $(exec_prefix)/bin
-# Directory in which to install Init.scm, COPYING, and Transcen.scm.
-libdir = $(exec_prefix)/lib/scm
-# Directory to search by default for included makefiles.
-includedir = $(prefix)/include
-# Directory to install the Info files in.
-infodir = $(prefix)/info
-# Directory to install the man page in.
-mandir = $(prefix)/man/man$(manext)
-# Number to put on the man page filename.
-manext = 1
-# Directory to perform pre-install tests in.
-testdir = $(srcdir)
-
-# Program to install `scm'.
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-# Program to install the man page.
-INSTALL_DATA = @INSTALL_DATA@
-# Generic install program.
-INSTALL = @INSTALL@
-
-# Program to format Texinfo source into Info files.
-MAKEINFO = makeinfo
-# Program to format Texinfo source into DVI files.
-TEXI2DVI = texi2dvi
-
-# Programs to make tags files.
-ETAGS = etags
-CTAGS = ctags -tw
-
-# You should not need to change below this line.
-
-SHELL = /bin/sh
-DFLAG = -DIMPLINIT=\"$(libdir)/Init.scm\"
-TDFLAG = -DIMPLINIT=\"$(testdir)/Init.scm\"
-# nunix = nonunix
-nunix = $(srcdir)
-# examples = examples
-examples = $(srcdir)
-ffiles = continue.o time.o repl.o fscl.o sys.o feval.o subr.o sc2.o \
-funif.o rope.o ramap.o findexec.o rgx.o #edline.o crs.o 
-fifiles = continue.o time.o repl.o iscm.o fscl.o sys.o feval.o subr.o \
-sc2.o funif.o rope.o ramap.o findexec.o #rgx.o
-efiles = time.o repl.o escl.o sys.o eeval.o subr.o sc2.o eunif.o #rgx.o
-cfiles = $(srcdir)/scm.c $(srcdir)/time.c $(srcdir)/repl.c \
-	$(srcdir)/scl.c $(srcdir)/sys.c $(srcdir)/eval.c \
-	$(srcdir)/subr.c $(srcdir)/sc2.c $(srcdir)/unif.c \
-	$(srcdir)/rgx.c $(srcdir)/crs.c $(srcdir)/dynl.c $(srcdir)/findexec.c
-hfiles = $(srcdir)/scm.h $(srcdir)/scmfig.h scmconfig.h \
-	$(srcdir)/setjump.h $(srcdir)/patchlvl.h
-ifiles = Init.scm Transcen.scm
-tfiles = $(examples)/test.scm $(examples)/example.scm \
-	$(examples)/pi.scm $(examples)/pi.c $(examples)/split.scm
-dfiles = $(srcdir)/README $(srcdir)/COPYING $(srcdir)/scm.1 \
-	$(srcdir)/QUICKREF $(srcdir)/MANUAL $(srcdir)/ChangeLog \
-	$(srcdir)/code.doc $(srcdir)/ANNOUNCE
-mfiles = Makefile $(nunix)/makefile.msc $(nunix)/makefile.bor \
-	$(nunix)/makefile.tur $(nunix)/makefile.djg \
-	$(nunix)/makefile.emx $(nunix)/makefile.qc \
-	$(nunix)/compile.amiga $(nunix)/link.amiga \
-	$(nunix)/makefile.aztec $(nunix)/makefile.ast \
-	$(nunix)/makefile.prj $(nunix)/dmakefile \
-	$(nunix)/makefile.wcc
-vfiles = $(nunix)/setjump.mar $(nunix)/VMSBUILD.COM $(nunix)/VMSGCC.COM
-afiles = $(dfiles) $(cfiles) $(hfiles) $(ifiles) $(tfiles) $(mfiles) $(vfiles)
-
-.SUFFIXES:
-.SUFFIXES: .o .c .h .ps .dvi .info .texinfo .scm
-
-.PHONY: all
-all: scm
-
-# -DINITS= the initialization calls for user extension files.
-# -DFINALS= the finalialization calls for user extension files.
-dbscm: escm.a sc2.o $(srcdir)/../wb/db.a $(srcdir)/scm.c $(srcdir)/scm.h \
-		$(srcdir)/scmfig.h $(srcdir)/patchlvl.h Makefile
-	$(CC) -o dbscm $(CFLAGS) $(INITS)init_db\(\)\;init_rgx\(\) \
-		$(FINALS)final_db\(\) $(defines) $(srcdir)/scm.c \
-		escm.a $(srcdir)/../wb/db.a $(LOADLIBES) $(extras)
-	rm escm.a
-curscm: escm.a crs.o
-	$(CC) -o curscm $(CFLAGS) $(INITS)init_curses\(\)\;init_rgx\(\) \
-		$(FINALS)lendwin\(\) $(srcdir)/scm.c crs.o escm.a -lcurses \
-		$(LOADLIBES) $(extras)
-	rm escm.a
-dscm: dscm.a main.o
-	$(CC) -o dscm $(CFLAGS) main.o -ldld
-dscm.a: $(efiles) Makefile dynl.o $(srcdir)/scm.c
-	$(CC) $(CFLAGS) -DRTL $(INITS)init_dynl\(\) -c $(srcdir)/scm.c
-	ar crvs dscm.a scm.o dynl.o $(efiles) $(LOADLIBES)
-dynl.o: $(srcdir)/dynl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		Makefile
-	$(CC) $(CFLAGS) -DDLD -DRTL -c $(srcdir)/dynl.c
-
-instscm: $(fifiles)
-	$(CC) -o instscm $(fifiles) $(LOADLIBES) $(extras)
-
-scm: $(ffiles) fscm.o
-	$(CC) -o scm $(ffiles) fscm.o $(LOADLIBES) $(extras)
-fscm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h $(srcdir)/patchlvl.h
-	$(CC) $(CFLAGS) $(TDFLAG) $(defines) -c $(FFLAGS) $(INITS) \
-		$(FINALS) $(srcdir)/scm.c
-	mv scm.o fscm.o
-
-iscm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h $(srcdir)/patchlvl.h
-	$(CC) $(CFLAGS) $(DFLAG) $(defines) -c $(FFLAGS) $(INITS) \
-		$(FINALS) $(srcdir)/scm.c
-	mv scm.o iscm.o
-
-fscl.o: $(srcdir)/scl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(FFLAGS) $(srcdir)/scl.c
-	mv scl.o fscl.o
-feval.o: $(srcdir)/eval.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(FFLAGS) $(srcdir)/eval.c
-	mv eval.o feval.o
-funif.o: $(srcdir)/unif.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(FFLAGS) $(srcdir)/unif.c
-	mv unif.o funif.o
-
-escm: $(efiles) escm.o
-	$(CC) -o escm $(efiles) escm.o $(LOADLIBES) $(extras)
-escm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h $(srcdir)/patchlvl.h
-	$(CC) $(CFLAGS) $(defines) -c $(INITS) $(FINALS) $(srcdir)/scm.c
-	mv scm.o escm.o
-escl.o: $(srcdir)/scl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/scl.c
-	mv scl.o escl.o
-eeval.o: $(srcdir)/eval.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/eval.c
-	mv eval.o eeval.o
-eunif.o: $(srcdir)/unif.c $(srcdir)/scm.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c unif.c
-	mv unif.o eunif.o
-
-repl.o: $(srcdir)/repl.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		$(srcdir)/setjump.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(TDFLAG) $(srcdir)/repl.c
-sys.o: $(srcdir)/sys.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		$(srcdir)/setjump.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/sys.c
-continue.o: $(srcdir)/continue.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		$(srcdir)/setjump.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/continue.c
-rope.o: $(srcdir)/rope.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		$(srcdir)/setjump.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/rope.c
-ramap.o: $(srcdir)/ramap.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		$(srcdir)/setjump.h scmconfig.h
-		$(CC) $(CFLAGS) $(defines) -c $(srcdir)/ramap.c
-time.o: $(srcdir)/time.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/time.c
-subr.o: $(srcdir)/subr.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/subr.c
-sc2.o: $(srcdir)/sc2.c $(srcdir)/scm.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/sc2.c
-rgx.o: $(srcdir)/rgx.c $(srcdir)/scm.h Makefile scmconfig.h
-	$(CC) $(CFLAGS) $(defines) $(RGXFLAGS) -c rgx.c
-crs.o: $(srcdir)/crs.c $(srcdir)/scm.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c crs.c
-edline.o: $(srcdir)/edline.c $(srcdir)/scm.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c edline.c
-findexec.o: $(srcdir)/findexec.c
-	$(CC) $(CFLAGS) $(defines) -c $(srcdir)/findexec.c
-
-both: scm escm
-
-$(srcdir)/proto.h: $(cfiles)
-	rm -f $(srcdir)/proto.h
-	mkproto $(cfiles) > $(srcdir)/proto.h
-
-libscm.a: rtlscm.o $(ffiles)
-	rm -f libscm.a
-	ar rc libscm.a rtlscm.o $(ffiles)
-	$(RANLIB) libscm.a
-
-rtlscm.o: $(srcdir)/scm.c $(srcdir)/scm.h $(srcdir)/scmfig.h \
-		$(srcdir)/patchlvl.h scmconfig.h
-	$(CC) $(CFLAGS) $(defines) -c $(FFLAGS) -DRTL $(INITS)init_user_scm\(\) \
-	$(FINALS) $(srcdir)/scm.c
-	mv scm.o rtlscm.o
-
-.PHONY: install installdirs
-install: installdirs \
-	$(bindir)/$(instname) $(mandir)/$(instname).$(manext) \
-	$(libdir)/Init.scm $(libdir)/Transcen.scm $(libdir)/COPYING
-
-installdirs:
-	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) \
-		$(mandir) $(libdir)
-
-$(bindir)/$(instname): instscm
-	$(INSTALL_PROGRAM) instscm $@.new
-# Some systems can't deal with renaming onto a running binary.
-	-rm -f $@.old
-	-mv $@ $@.old
-	mv $@.new $@
-
-$(mandir)/$(instname).$(manext): $(srcdir)/scm.1
-	$(INSTALL_DATA) $(srcdir)/scm.1 $@
-
-$(libdir)/Init.scm: $(srcdir)/Init.scm
-	$(INSTALL_DATA) $(srcdir)/Init.scm $@
-
-$(libdir)/Transcen.scm: $(srcdir)/Transcen.scm
-	$(INSTALL_DATA) $(srcdir)/Transcen.scm $@
-
-$(libdir)/COPYING: $(srcdir)/COPYING
-	$(INSTALL_DATA) $(srcdir)/COPYING $@
-
-.PHONY: tar shar dclshar com zip pubzip
-tar: scm.tar
-shar: scm.shar
-dclshar: scm.com
-com: scm.com
-zip: scm.zip
-scm.tar: temp/scm
-	cd temp; tar chf ../scm.tar scm
-	chmod 664 scm.tar
-scm.shar: temp/scm
-	cd temp; shar scm >../scm.shar
-	chmod 664 scm.shar
-scm.com: temp/scm
-	cd temp; dclshar scm >../scm.com
-	chmod 664 scm.com
-scm.zip: temp/scm
-	cd temp; zip -r ../scm.zip scm
-	chmod 664 scm.zip
-pubzip: temp/scm
-	cd temp; zip -ru ../../pub/scm.zip scm
-	chmod 664 ../pub/scm.zip
-
-temp/scm: $(afiles)
-	-rm -rf temp
-	mkdir temp
-	mkdir temp/scm
-	ln $(afiles) temp/scm
-
-.PHONY: dist tar.Z tar.gz shar.Z
-dist: tar.gz
-tar.Z: scm.tar.Z
-tar.gz: scm.tar.gz
-shar.Z: scm.shar.Z
-scm.tar.Z: scm.tar
-	-rm -f scm.tar.Z
-	compress scm.tar
-	chmod 664 scm.tar.Z
-scm.tar.gz: scm.tar
-	-rm -f scm.tar.gz
-	gzip scm.tar
-	chmod 664 scm.tar.gz
-scm.shar.Z: scm.shar
-	-rm -f scm.shar.Z
-	compress scm.shar
-	chmod 664 scm.shar.Z
-
-.PHONY: pubdiffs distdiffs
-pubdiffs: temp/scm
-	mv temp/scm temp/nscm
-	cd temp;unzip ../../pub/scm.zip
-	-rm -f scm.diffs
-	-diff -c temp/scm temp/nscm > scm.diffs
-	-rm -rf temp
-	ls -l scm.diffs
-distdiffs: temp/scm
-	mv temp/scm temp/nscm
-	cd temp;zcat ../../dist/scm*.tar.gz | tar xvf -
-	-rm -f scm.pat
-	-diff -c temp/scm temp/nscm > scm.pat
-	-rm -rf temp
-	ls -l scm.pat
-
-.PHONY: checks check echeck
-checks: check echeck
-check: ./scm test.scm
-	echo '(test-sc4)(test-cont)(test-inexact)(gc)(exit (length errs))' \
-	| ./scm test.scm
-echeck: ./escm test.scm
-	echo '(test-sc4)(test-cont)(gc)(exit (length errs))' \
-	| ./escm test.scm
-
-.PHONY: lint
-lint: lints
-lints: $(cfiles) $(hfiles)
-	lint $(CFLAGS) $(cfiles) | tee lints
-#	lint $(CFLAGS) $(cfiles) | tee lintes
-
-# Seds to help find names not unique in first 8 characters (name8s).
-# for BSD nm format
-# SED_TO_STRIP_NM = sed -e '/.*\.o$$/d' -e 's/.* _//' -e 's/.* T //'
-#old, bad for T [^_] on suns: SED_TO_STRIP_NM=sed -e '/.*\.o$$/d' -e 's/.* _//'
-# For a System V nm where plain C identifiers have _ prepended:
-#SED_TO_STRIP_NM = sed -e '/^_[A-Za-z][A-za-z0-9_]*[ 	|].*|extern|!d' -e 's/|/ /g' -e 's/^_//'
-# For a System V nm where plain C identifiers have nothing prepended:
-#SED_TO_STRIP_NM = sed -e '/^[A-Za-z][A-za-z0-9_]*[ 	|].*|extern|!d' -e 's/|/ /g'
-SED_TO_STRIP_NM = :
-
-.PHONY: name8
-name8: name8s
-name8s: scm
-	nm scm |\
-	$(SED_TO_STRIP_NM) |\
-	sort -u|\
-	awk '{	if (substr(l,1,8)==substr($$1,1,8)) {\
-			if (p) print l;\
-			print $$1;p=0;stat=1\
-		}else p=1;\
-		l=$$1\
-	     }END{exit stat}' - |\
-	tee name8s
-
-tagsrcs = $(hfiles) $(cfiles) $(ifiles) $(mfiles) $(vfiles) \
-	MANUAL code.doc README
-TAGS: $(tagsrcs)
-	$(ETAGS) $(tagsrcs)
-tags: $(tagsrcs)
-	$(CTAGS) $(tagsrcs)
-
-.PHONY: clean cleanish realclean
-clean:
-	-rm -f *~ \#* *.o *\# *.orig *.rej a.out core lints tmp*
-	-rm -rf temp hobtemp
-cleanish:
-	-rm -f *~ \#* *\# *.orig *.rej a.out core lints tmp*
-	-rm -rf temp hobtemp
-distclean:
-	-rm -f *~ \#* *.o *\# *.orig *.rej a.out core TAGS lints tmp* \
-		scmconfig.h config.status
-	-rm -rf temp hobtemp
-
-Makefile: config.status $(srcdir)/Makefile.in
-	$(SHELL) config.status
-scmconfig.h: stamp-config ;
-stamp-config: config.status $(srcdir)/scmconfig.h.in
-	$(SHELL) config.status
-	touch stamp-config
-
-configure: configure.in
-	autoconf $(ACFLAGS)
-scmconfig.h.in: configure.in
-	autoheader $(ACFLAGS)
-
-# This tells versions [3.59,3.63) of GNU make not to export all variables.
-.NOEXPORT:
-
-# Automatically generated dependencies will be put at the end of the file.