1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
|
#############################################################
#
# U-Boot
#
#############################################################
U_BOOT_VERSION:=1.3.0
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
U_BOOT_CAT:=$(BZCAT)
U_BOOT_BIN:=u-boot.bin
U_BOOT_TOOLS_BIN:=mkimage
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
$(DL_DIR)/$(U_BOOT_SOURCE):
$(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
$(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
| tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \
u-boot-$(U_BOOT_VERSION)-\*.patch\*
touch $@
$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked
ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"")
@if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \
echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \
echo " but the file at:"; \
echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \
echo " does not exist."; \
echo; \
echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \
echo; \
exit 1; \
fi
cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE)
endif
touch $@
$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"")
@echo
@echo " You did not specify a target u-boot config board, so u-boot"
@echo " has no way of knowing which board you want to build your"
@echo " bootloader for."
@echo
@echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable."
@echo
@exit 1
endif
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
$(MAKE) -C $(U_BOOT_DIR) \
$(BR2_TARGET_U_BOOT_CONFIG_BOARD)
touch $@
$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
@echo >> $(U_BOOT_INC_CONF_FILE)
@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
ifneq ($(strip $(BR2_PROJECT)),"")
@echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE)
endif
ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"")
@echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE)
endif
ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"")
@echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE)
ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"")
@echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE)
endif
ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"")
@echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE)
endif
endif # end BR2_TARGET_U_BOOT_IPADDR
ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"")
@echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE)
endif
ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"")
@echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE)
$(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE)
endif
ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"")
@echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE)
@echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE)
endif
ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"")
@echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE)
@echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE)
endif
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
touch $@
$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
$(MAKE) -C $(U_BOOT_DIR)
$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN)
u-boot-clean:
$(MAKE) -C $(U_BOOT_DIR) clean
u-boot-dirclean:
rm -rf $(U_BOOT_DIR)
u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
#############################################################
#
# Toplevel Makefile options
#
#############################################################
ifeq ($(strip $(BR2_TARGET_U_BOOT)),y)
TARGETS+=u-boot
endif
u-boot-status:
@echo
@echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
@echo
@echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
@echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
@echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP)
@echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR)
@echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY)
@echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK)
@echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR)
@echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR)
@echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS)
@echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD)
@echo
@exit 0
|
