path: root/target/device/Atmel/arch-arm/kernel-patches-2.6.20.4/linux-2.6.20.4-atmel.patch

diff -urN linux-2.6.20.4-0rig/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.20.4-atmel/arch/arm/configs/at91sam9263ek_defconfig
--- linux-2.6.20.4-0rig/arch/arm/configs/at91sam9263ek_defconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/configs/at91sam9263ek_defconfig	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,1184 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Mon Jan  8 16:06:54 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff -urN linux-2.6.20.4-0rig/arch/arm/configs/csb337_defconfig linux-2.6.20.4-atmel/arch/arm/configs/csb337_defconfig
--- linux-2.6.20.4-0rig/arch/arm/configs/csb337_defconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/configs/csb337_defconfig	2007-03-24 16:39:15.000000000 +0100
@@ -355,10 +355,12 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
 
 #
 # Self-contained MTD device drivers
diff -urN linux-2.6.20.4-0rig/arch/arm/configs/csb637_defconfig linux-2.6.20.4-atmel/arch/arm/configs/csb637_defconfig
--- linux-2.6.20.4-0rig/arch/arm/configs/csb637_defconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/configs/csb637_defconfig	2007-03-24 16:39:15.000000000 +0100
@@ -355,10 +355,12 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
 
 #
 # Self-contained MTD device drivers
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200.c	2007-03-24 16:39:15.000000000 +0100
@@ -117,6 +117,36 @@
 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -132,7 +162,12 @@
 	&twi_clk,
 	&spi_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc5
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	&ohci_clk,
 	&ether_clk,
 	// irq0 .. irq6
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_devices.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_devices.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_devices.c	2007-03-24 16:39:15.000000000 +0100
@@ -315,7 +315,7 @@
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -361,7 +361,7 @@
 	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -480,7 +480,18 @@
  *  SPI
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)		/* legacy SPI driver */
+#define SPI_DEVNAME	"at91_spi"
+
+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE)	/* SPI bitbanging driver */
+#define SPI_DEVNAME	"at91_spi"
+
+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)	/* new SPI driver */
+#define SPI_DEVNAME	"atmel_spi"
+
+#endif
+
+#ifdef SPI_DEVNAME
 static u64 spi_dmamask = 0xffffffffUL;
 
 static struct resource spi_resources[] = {
@@ -497,7 +508,7 @@
 };
 
 static struct platform_device at91rm9200_spi_device = {
-	.name		= "at91_spi",
+	.name		= SPI_DEVNAME,
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &spi_dmamask,
@@ -594,6 +605,10 @@
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
@@ -602,6 +617,32 @@
 #endif
 
 
+#if defined(CONFIG_NEW_LEDS)
+
+static struct platform_device at91_leds = {
+	.name		= "at91_leds",
+	.id		= -1,
+};
+
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
+{
+	if (!nr)
+		return;
+
+	at91_leds.dev.platform_data = leds;
+
+	for ( ; nr; nr--, leds++) {
+		leds->index = nr;	/* first record stores number of leds */
+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
+	}
+
+	platform_device_register(&at91_leds);
+}
+#else
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  UART
  * -------------------------------------------------------------------- */
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_time.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_time.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_time.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_time.c	2007-03-24 16:39:15.000000000 +0100
@@ -38,7 +38,8 @@
  * The ST_CRTR is updated asynchronously to the master clock.  It is therefore
  *  necessary to read it twice (with the same value) to ensure accuracy.
  */
-static inline unsigned long read_CRTR(void) {
+static inline unsigned long read_CRTR(void)
+{
 	unsigned long x1, x2;
 
 	do {
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260.c	2007-03-24 16:39:15.000000000 +0100
@@ -14,6 +14,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
@@ -27,7 +28,11 @@
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	}
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
 		.length		= AT91SAM9260_SRAM0_SIZE,
@@ -37,7 +42,14 @@
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
 		.length		= AT91SAM9260_SRAM1_SIZE,
 		.type		= MT_DEVICE,
-	},
+	}
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+		.type		= MT_DEVICE,
+	}
 };
 
 /* --------------------------------------------------------------------
@@ -107,13 +119,28 @@
 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk ether_clk = {
-	.name		= "ether_clk",
+static struct clk macb_clk = {
+	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -137,6 +164,21 @@
 	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -152,14 +194,18 @@
 	&spi0_clk,
 	&spi1_clk,
 	// ssc
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
-	&ether_clk,
+	&macb_clk,
 	&isi_clk,
 	&usart3_clk,
 	&usart4_clk,
 	&usart5_clk,
-	// tc3 .. tc5
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	// irq0 .. irq2
 };
 
@@ -213,7 +259,7 @@
 
 static void at91sam9260_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
@@ -221,10 +267,36 @@
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
+static void __init at91sam9xe_initialize(void)
+{
+	unsigned long cidr, sram_size;
+
+	cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+	switch (cidr & AT91_CIDR_SRAMSIZ) {
+		case AT91_CIDR_SRAMSIZ_32K:
+			sram_size = 2 * SZ_16K;
+			break;
+		case AT91_CIDR_SRAMSIZ_16K:
+		default:
+			sram_size = SZ_16K;
+	}
+
+	at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+	at91sam9xe_sram_desc->length = sram_size;
+
+	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
 void __init at91sam9260_initialize(unsigned long main_clock)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+	
+	if (cpu_is_at91sam9xe())
+		at91sam9xe_initialize();
+	else
+		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));	
 
 	at91_arch_reset = at91sam9260_reset;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260_devices.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260_devices.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260_devices.c	2007-03-24 16:39:15.000000000 +0100
@@ -128,7 +128,7 @@
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@
 	platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #endif
 
 
@@ -229,7 +229,7 @@
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -275,7 +275,7 @@
 	platform_device_register(&at91sam9260_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -515,6 +515,10 @@
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
@@ -523,6 +527,32 @@
 #endif
 
 
+#if defined(CONFIG_NEW_LEDS)
+
+static struct platform_device at91_leds = {
+	.name		= "at91_leds",
+	.id		= -1,
+};
+
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
+{
+	if (!nr)
+		return;
+
+	at91_leds.dev.platform_data = leds;
+
+	for ( ; nr; nr--, leds++) {
+		leds->index = nr;	/* first record stores number of leds */
+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
+	}
+
+	platform_device_register(&at91_leds);
+}
+#else
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  UART
  * -------------------------------------------------------------------- */
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261.c	2007-03-24 16:39:15.000000000 +0100
@@ -97,6 +97,21 @@
 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
@@ -121,7 +136,9 @@
 	&spi0_clk,
 	&spi1_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
 	&lcdc_clk,
 	// irq0 .. irq2
@@ -208,7 +225,7 @@
 
 static void at91sam9261_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261_devices.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261_devices.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261_devices.c	2007-03-24 16:39:15.000000000 +0100
@@ -14,6 +14,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/atmel_lcdc.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
@@ -159,7 +162,7 @@
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +195,7 @@
 	platform_device_register(&at91sam9261_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -345,7 +348,7 @@
 	.num_resources	= ARRAY_SIZE(spi0_resources),
 };
 
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA28, AT91_PIN_PA6 };
 
 static struct resource spi1_resources[] = {
 	[0] = {
@@ -430,9 +433,9 @@
  *  LCD Controller
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = 0xffffffffUL;
-static struct at91fb_info lcdc_data;
+static struct atmel_lcdfb_info lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -455,18 +458,18 @@
 };
 
 static struct platform_device at91_lcdc_device = {
-	.name		= "at91-fb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &lcdc_data,
+	.name           = "atmel_lcdfb",
+	.id             = 0,
+	.dev            = {
+				.dma_mask          = &lcdc_dmamask,
+				.coherent_dma_mask = 0xffffffff,
+				.platform_data     = &lcdc_data,
 	},
 	.resource	= lcdc_resources,
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct at91fb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 {
 	if (!data) {
 		return;
@@ -499,7 +502,7 @@
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 #endif
 
 
@@ -513,6 +516,10 @@
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
@@ -521,6 +528,32 @@
 #endif
 
 
+#if defined(CONFIG_NEW_LEDS)
+
+static struct platform_device at91_leds = {
+	.name		= "at91_leds",
+	.id		= -1,
+};
+
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
+{
+	if (!nr)
+		return;
+
+	at91_leds.dev.platform_data = leds;
+
+	for ( ; nr; nr--, leds++) {
+		leds->index = nr;	/* first record stores number of leds */
+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
+	}
+
+	platform_device_register(&at91_leds);
+}
+#else
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  UART
  * -------------------------------------------------------------------- */
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,313 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9263.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+		.length		= AT91SAM9263_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+		.length		= AT91SAM9263_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+	.name		= "pioCDE_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioCDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	// can
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc0 .. ssc1
+	// ac97
+	&tcb_clk,
+	// pwmc
+	&macb_clk,
+	// 2dge
+	&udc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	// dma
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+	{
+		.id		= AT91SAM9263_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOC,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioCDE_clk,
+	}
+};
+
+static void at91sam9263_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+	at91_arch_reset = at91sam9263_reset;
+	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9263_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C, D and E */
+	0,
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	4,	/* CAN */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	6,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,
+	0,	/* 2D Graphic Engine */
+	3,	/* USB Device Port */
+	0,	/* Image Sensor Interface */
+	3,	/* LDC Controller */
+	0,	/* DMA Controller */
+	0,
+	3,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9263_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263_devices.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263_devices.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263_devices.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,918 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9263_devices.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_UHP_BASE,
+		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UHP,
+		.end	= AT91SAM9263_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_UDP,
+		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UDP,
+		.end	= AT91SAM9263_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_EMAC,
+		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_EMAC,
+		.end	= AT91SAM9263_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI0,
+		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI0,
+		.end	= AT91SAM9263_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+	.name		= "at91_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI1,
+		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI1,
+		.end	= AT91SAM9263_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+	.name		= "at91_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA12, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA16, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA17, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA18, 1);
+				at91_set_A_periph(AT91_PIN_PA19, 1);
+				at91_set_A_periph(AT91_PIN_PA20, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA1, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA0, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA3, 1);
+				at91_set_A_periph(AT91_PIN_PA4, 1);
+				at91_set_A_periph(AT91_PIN_PA5, 1);
+			}
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc0_device);
+	} else {			/* MCI1 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA6, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA21, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA22, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA23, 1);
+				at91_set_A_periph(AT91_PIN_PA24, 1);
+				at91_set_A_periph(AT91_PIN_PA25, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA7, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA8, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA9, 1);
+				at91_set_A_periph(AT91_PIN_PA10, 1);
+				at91_set_A_periph(AT91_PIN_PA11, 1);
+			}
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc1_device);
+	}
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9263_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TWI,
+		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TWI,
+		.end	= AT91SAM9263_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI0,
+		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI0,
+		.end	= AT91SAM9263_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI1,
+		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI1,
+		.end	= AT91SAM9263_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_LCDC_BASE,
+		.end	= AT91SAM9263_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_LCDC,
+		.end	= AT91SAM9263_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name           = "atmel_lcdfb",
+	.id             = 0,
+	.dev            = {
+				.dma_mask          = &lcdc_dmamask,
+				.coherent_dma_mask = 0xffffffff,
+				.platform_data     = &lcdc_data,
+	},
+	.resource       = lcdc_resources,
+	.num_resources  = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data) {
+		return;
+	}
+
+	/* configure PIO for LCDC */
+        at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
+        at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
+        at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
+        at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
+        at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
+        at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
+        at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
+        at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
+        at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
+        at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
+        at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
+        at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+        at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+        at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
+        at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+        at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+        at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
+        at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
+        at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
+        at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
+        at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
+        at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+#if defined(CONFIG_NEW_LEDS)
+
+static struct platform_device at91_leds = {
+	.name		= "at91_leds",
+	.id		= -1,
+};
+
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
+{
+	if (!nr)
+		return;
+
+	at91_leds.dev.platform_data = leds;
+
+	for ( ; nr; nr--, leds++) {
+		leds->index = nr;	/* first record stores number of leds */
+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
+	}
+
+	platform_device_register(&at91_leds);
+}
+#else
+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US0,
+		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US0,
+		.end	= AT91SAM9263_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA28, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PA29, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US1,
+		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US1,
+		.end	= AT91SAM9263_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_set_B_periph(AT91_PIN_PD7, 0);		/* RTS1 */
+	at91_set_B_periph(AT91_PIN_PD8, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US2,
+		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US2,
+		.end	= AT91SAM9263_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_set_B_periph(AT91_PIN_PD5, 0);		/* RTS2 */
+	at91_set_B_periph(AT91_PIN_PD6, 0);		/* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9263_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9263_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9263_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9263_dbgu_device;
+				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam926x_time.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam926x_time.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam926x_time.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam926x_time.c	2007-03-24 16:39:15.000000000 +0100
@@ -30,7 +30,6 @@
  * Returns number of microseconds since last timer interrupt.  Note that interrupts
  * will have been disabled by do_gettimeofday()
  *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
  */
 static unsigned long at91sam926x_gettimeoffset(void)
 {
@@ -39,7 +38,7 @@
 
 	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
 
-	return (unsigned long)(elapsed * 1000000) / LATCH;
+	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
 }
 
 /*
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-carmeva.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-carmeva.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-carmeva.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-carmeva.c	2007-03-24 16:39:15.000000000 +0100
@@ -134,7 +134,7 @@
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(&carmeva_mmc_data);
+	at91_add_device_mmc(0, &carmeva_mmc_data);
 }
 
 MACHINE_START(CARMEVA, "Carmeva")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb337.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb337.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb337.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb337.c	2007-03-24 16:39:15.000000000 +0100
@@ -24,6 +24,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -58,6 +60,7 @@
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+	at91_set_gpio_output(AT91_PIN_PB2, 1);		/* third (unused) LED */
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&csb337_uart_config);
@@ -112,6 +115,91 @@
 	},
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
+static struct at91_gpio_led csb337_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= AT91_PIN_PB0,
+		.trigger	= "heartbeat",
+	},
+	{
+		.name		= "led1",
+		.gpio		= AT91_PIN_PB1,
+		.trigger	= "timer",
+	},
+	{
+		.name		= "led2",
+		.gpio		= AT91_PIN_PB2,
+	}
+};
+
+#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
+static irqreturn_t switch_irq_handler(int irq, void *context)
+{
+	return IRQ_HANDLED;
+}
+
+static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
+{
+	int res;
+
+	res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
+	if (res == 0)
+		enable_irq_wake(irq);
+}
+
+static void __init csb300_switches(void)
+{
+#ifdef CONFIG_CSB300_WAKE_SW0
+	at91_set_A_periph(AT91_PIN_PB29, 1);		/* IRQ0 */
+	switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
+#endif
+#ifdef CONFIG_CSB300_WAKE_SW1
+	at91_set_gpio_input(AT91_PIN_PB28, 1);
+	at91_set_deglitch(AT91_PIN_PB28, 1);
+	switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
+#endif
+	/* there's also SW2 at PA21, GPIO or TIOA2 */
+}
+#else
+static void __init csb300_switches(void) {}
+#endif
+
 static void __init csb337_board_init(void)
 {
 	/* Serial */
@@ -130,7 +218,13 @@
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
+	at91_add_device_mmc(0, &csb337_mmc_data);
+	/* LEDS */
+	at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
+	/* NOR flash */
+	platform_device_register(&csb_flash);
+	/* Switches on CSB300 */
+	csb300_switches();
 }
 
 MACHINE_START(CSB337, "Cogent CSB337")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb637.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb637.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb637.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb637.c	2007-03-24 16:39:15.000000000 +0100
@@ -23,6 +23,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -81,6 +82,42 @@
 	.pullup_pin   = AT91_PIN_PB1,
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb637_board_init(void)
 {
 	/* Serial */
@@ -95,6 +132,8 @@
 	at91_add_device_i2c();
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-dk.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-dk.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-dk.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-dk.c	2007-03-24 16:39:15.000000000 +0100
@@ -73,6 +73,185 @@
 	at91rm9200_init_interrupts(NULL);
 }
 
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#include <video/s1d13xxxfb.h>
+#include <asm/arch/ics1523.h>
+
+/* EPSON S1D13806 FB */
+#define AT91_FB_REG_BASE	0x30000000L
+#define AT91_FB_REG_SIZE	0x200
+#define AT91_FB_VMEM_BASE	0x30200000L
+#define AT91_FB_VMEM_SIZE	0x140000L
+
+static void __init dk_init_video(void)
+{
+	/* NWAIT Signal */
+	at91_set_A_periph(AT91_PIN_PC6, 0);
+
+	/* Initialization of the Static Memory Controller for Chip Select 2 */
+	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16			/* 16 bit */
+				| AT91_SMC_WSEN | AT91_SMC_NWS_(4)	/* wait states */
+				| AT91_SMC_TDF_(1)			/* float time */
+	);
+
+	at91_ics1523_init();
+}
+
+/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
+   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
+	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
+	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
+	{S1DREG_GPIO_CNF0,		0x00},
+	{S1DREG_GPIO_CNF1,		0x00},
+	{S1DREG_GPIO_CTL0,		0x08},
+	{S1DREG_GPIO_CTL1,		0x00},
+	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
+	{S1DREG_LCD_CLK_CNF,		0x00},
+	{S1DREG_CRT_CLK_CNF,		0x00},
+	{S1DREG_MPLUG_CLK_CNF,		0x00},
+	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
+	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
+	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
+	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
+	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
+	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
+	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
+	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
+	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
+	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
+	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
+	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
+	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
+	{S1DREG_LCD_DISP_START0,	0x00},
+	{S1DREG_LCD_DISP_START1,	0xC8},
+	{S1DREG_LCD_DISP_START2,	0x00},
+	{S1DREG_LCD_MEM_OFF0,		0x80},
+	{S1DREG_LCD_MEM_OFF1,		0x02},
+	{S1DREG_LCD_PIX_PAN,		0x00},
+	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
+	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
+	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
+	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
+	{S1DREG_TV_OUT_CTL,		0x10},
+	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
+	{S1DREG_CRT_DISP_START0,	0x00},
+	{S1DREG_CRT_DISP_START1,	0x00},
+	{S1DREG_CRT_DISP_START2,	0x00},
+	{S1DREG_CRT_MEM_OFF0,		0x80},
+	{S1DREG_CRT_MEM_OFF1,		0x02},
+	{S1DREG_CRT_PIX_PAN,		0x00},
+	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
+	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
+	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
+	{S1DREG_LCD_CUR_START,		0x01},
+	{S1DREG_LCD_CUR_XPOS0,		0x00},
+	{S1DREG_LCD_CUR_XPOS1,		0x00},
+	{S1DREG_LCD_CUR_YPOS0,		0x00},
+	{S1DREG_LCD_CUR_YPOS1,		0x00},
+	{S1DREG_LCD_CUR_BCTL0,		0x00},
+	{S1DREG_LCD_CUR_GCTL0,		0x00},
+	{S1DREG_LCD_CUR_RCTL0,		0x00},
+	{S1DREG_LCD_CUR_BCTL1,		0x1F},
+	{S1DREG_LCD_CUR_GCTL1,		0x3F},
+	{S1DREG_LCD_CUR_RCTL1,		0x1F},
+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
+	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
+	{S1DREG_CRT_CUR_START,		0x01},
+	{S1DREG_CRT_CUR_XPOS0,		0x00},
+	{S1DREG_CRT_CUR_XPOS1,		0x00},
+	{S1DREG_CRT_CUR_YPOS0,		0x00},
+	{S1DREG_CRT_CUR_YPOS1,		0x00},
+	{S1DREG_CRT_CUR_BCTL0,		0x00},
+	{S1DREG_CRT_CUR_GCTL0,		0x00},
+	{S1DREG_CRT_CUR_RCTL0,		0x00},
+	{S1DREG_CRT_CUR_BCTL1,		0x1F},
+	{S1DREG_CRT_CUR_GCTL1,		0x3F},
+	{S1DREG_CRT_CUR_RCTL1,		0x1F},
+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
+	{S1DREG_BBLT_CTL0,		0x00},
+	{S1DREG_BBLT_CTL0,		0x00},
+	{S1DREG_BBLT_CC_EXP,		0x00},
+	{S1DREG_BBLT_OP,		0x00},
+	{S1DREG_BBLT_SRC_START0,	0x00},
+	{S1DREG_BBLT_SRC_START1,	0x00},
+	{S1DREG_BBLT_SRC_START2,	0x00},
+	{S1DREG_BBLT_DST_START0,	0x00},
+	{S1DREG_BBLT_DST_START1,	0x00},
+	{S1DREG_BBLT_DST_START2,	0x00},
+	{S1DREG_BBLT_MEM_OFF0,		0x00},
+	{S1DREG_BBLT_MEM_OFF1,		0x00},
+	{S1DREG_BBLT_WIDTH0,		0x00},
+	{S1DREG_BBLT_WIDTH1,		0x00},
+	{S1DREG_BBLT_HEIGHT0,		0x00},
+	{S1DREG_BBLT_HEIGHT1,		0x00},
+	{S1DREG_BBLT_BGC0,		0x00},
+	{S1DREG_BBLT_BGC1,		0x00},
+	{S1DREG_BBLT_FGC0,		0x00},
+	{S1DREG_BBLT_FGC1,		0x00},
+	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
+	{S1DREG_LKUP_ADDR,		0x00},
+	{S1DREG_PS_CNF,			0x00},	/* Power Save disable */
+	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
+	{S1DREG_CPU2MEM_WDOGT,		0x00},
+	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
+};
+
+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
+	.initregs		= dk_s1dfb_initregs,
+	.initregssize		= ARRAY_SIZE(dk_s1dfb_initregs),
+	.platform_init_video	= dk_init_video,
+};
+
+static u64 s1dfb_dmamask = 0xffffffffUL;
+
+static struct resource dk_s1dfb_resource[] = {
+	[0] = {	/* video mem */
+		.name   = "s1d13806 memory",
+		.start  = AT91_FB_VMEM_BASE,
+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {	/* video registers */
+		.name   = "s1d13806 registers",
+		.start  = AT91_FB_REG_BASE,
+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dk_s1dfb_device = {
+	.name		= "s1d13806fb",
+	.id		= -1,
+	.dev		= {
+			.dma_mask		= &s1dfb_dmamask,
+			.coherent_dma_mask	= 0xffffffff,
+			.platform_data		= &dk_s1dfb_pdata,
+	},
+	.resource	= dk_s1dfb_resource,
+	.num_resources	= ARRAY_SIZE(dk_s1dfb_resource),
+};
+
+static void __init dk_add_device_video(void)
+{
+	platform_device_register(&dk_s1dfb_device);
+}
+#else
+static void __init dk_add_device_video(void) {}
+#endif
+
 static struct at91_eth_data __initdata dk_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
@@ -151,7 +330,7 @@
 #define DK_FLASH_SIZE	0x200000
 
 static struct physmap_flash_data dk_flash_data = {
-	.width	= 2,
+	.width		= 2,
 };
 
 static struct resource dk_flash_resource = {
@@ -170,6 +349,13 @@
 	.num_resources	= 1,
 };
 
+static struct at91_gpio_led dk_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= AT91_PIN_PB2,
+		.trigger	= "timer",
+	}
+};
 
 static void __init dk_board_init(void)
 {
@@ -194,14 +380,16 @@
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&dk_mmc_data);
+	at91_add_device_mmc(0, &dk_mmc_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
 	/* NOR Flash */
 	platform_device_register(&dk_flash);
+	/* LEDs */
+	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
 	/* VGA */
-//	dk_add_device_video();
+	dk_add_device_video();
 }
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-eb9200.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-eb9200.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-eb9200.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-eb9200.c	2007-03-24 16:39:15.000000000 +0100
@@ -109,7 +109,7 @@
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(&eb9200_mmc_data);
+	at91_add_device_mmc(0, &eb9200_mmc_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-ek.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-ek.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-ek.c	2007-03-24 16:39:15.000000000 +0100
@@ -73,6 +73,187 @@
 	at91rm9200_init_interrupts(NULL);
 }
 
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#include <video/s1d13xxxfb.h>
+#include <asm/arch/ics1523.h>
+
+/* EPSON S1D13806 FB */
+#define AT91_FB_REG_BASE	0x40000000L
+#define	AT91_FB_REG_SIZE	0x200
+#define AT91_FB_VMEM_BASE	0x40200000L
+#define AT91_FB_VMEM_SIZE	0x140000L
+
+static void __init ek_init_video(void)
+{
+	/* NWAIT Signal */
+	at91_set_A_periph(AT91_PIN_PC6, 0);
+
+	/* Initialization of the Static Memory Controller for Chip Select 3 */
+	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16			/* 16 bit */
+				| AT91_SMC_WSEN | AT91_SMC_NWS_(5)	/* wait states */
+				| AT91_SMC_TDF_(1)			/* float time */
+	);
+
+	at91_ics1523_init();
+}
+
+/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
+   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
+	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
+	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
+	{S1DREG_GPIO_CNF0,		0xFF},	// 0x00
+	{S1DREG_GPIO_CNF1,		0x1F},	// 0x08
+	{S1DREG_GPIO_CTL0,		0x00},
+	{S1DREG_GPIO_CTL1,		0x00},
+	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
+	{S1DREG_LCD_CLK_CNF,		0x00},
+	{S1DREG_CRT_CLK_CNF,		0x00},
+	{S1DREG_MPLUG_CLK_CNF,		0x00},
+	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
+	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
+	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
+	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
+	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
+	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
+	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
+	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
+	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
+	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
+	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
+	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
+	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
+	{S1DREG_LCD_DISP_START0,	0x00},
+	{S1DREG_LCD_DISP_START1,	0xC8},
+	{S1DREG_LCD_DISP_START2,	0x00},
+	{S1DREG_LCD_MEM_OFF0,		0x80},
+	{S1DREG_LCD_MEM_OFF1,		0x02},
+	{S1DREG_LCD_PIX_PAN,		0x00},
+	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
+	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
+	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
+	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
+	{S1DREG_TV_OUT_CTL,		0x10},
+	{0x005E,			0x9F},
+	{0x005F,			0x00},
+	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
+	{S1DREG_CRT_DISP_START0,	0x00},
+	{S1DREG_CRT_DISP_START1,	0x00},
+	{S1DREG_CRT_DISP_START2,	0x00},
+	{S1DREG_CRT_MEM_OFF0,		0x80},
+	{S1DREG_CRT_MEM_OFF1,		0x02},
+	{S1DREG_CRT_PIX_PAN,		0x00},
+	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
+	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
+	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
+	{S1DREG_LCD_CUR_START,		0x01},
+	{S1DREG_LCD_CUR_XPOS0,		0x00},
+	{S1DREG_LCD_CUR_XPOS1,		0x00},
+	{S1DREG_LCD_CUR_YPOS0,		0x00},
+	{S1DREG_LCD_CUR_YPOS1,		0x00},
+	{S1DREG_LCD_CUR_BCTL0,		0x00},
+	{S1DREG_LCD_CUR_GCTL0,		0x00},
+	{S1DREG_LCD_CUR_RCTL0,		0x00},
+	{S1DREG_LCD_CUR_BCTL1,		0x1F},
+	{S1DREG_LCD_CUR_GCTL1,		0x3F},
+	{S1DREG_LCD_CUR_RCTL1,		0x1F},
+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
+	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
+	{S1DREG_CRT_CUR_START,		0x01},
+	{S1DREG_CRT_CUR_XPOS0,		0x00},
+	{S1DREG_CRT_CUR_XPOS1,		0x00},
+	{S1DREG_CRT_CUR_YPOS0,		0x00},
+	{S1DREG_CRT_CUR_YPOS1,		0x00},
+	{S1DREG_CRT_CUR_BCTL0,		0x00},
+	{S1DREG_CRT_CUR_GCTL0,		0x00},
+	{S1DREG_CRT_CUR_RCTL0,		0x00},
+	{S1DREG_CRT_CUR_BCTL1,		0x1F},
+	{S1DREG_CRT_CUR_GCTL1,		0x3F},
+	{S1DREG_CRT_CUR_RCTL1,		0x1F},
+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
+	{S1DREG_BBLT_CTL0,		0x00},
+	{S1DREG_BBLT_CTL0,		0x00},
+	{S1DREG_BBLT_CC_EXP,		0x00},
+	{S1DREG_BBLT_OP,		0x00},
+	{S1DREG_BBLT_SRC_START0,	0x00},
+	{S1DREG_BBLT_SRC_START1,	0x00},
+	{S1DREG_BBLT_SRC_START2,	0x00},
+	{S1DREG_BBLT_DST_START0,	0x00},
+	{S1DREG_BBLT_DST_START1,	0x00},
+	{S1DREG_BBLT_DST_START2,	0x00},
+	{S1DREG_BBLT_MEM_OFF0,		0x00},
+	{S1DREG_BBLT_MEM_OFF1,		0x00},
+	{S1DREG_BBLT_WIDTH0,		0x00},
+	{S1DREG_BBLT_WIDTH1,		0x00},
+	{S1DREG_BBLT_HEIGHT0,		0x00},
+	{S1DREG_BBLT_HEIGHT1,		0x00},
+	{S1DREG_BBLT_BGC0,		0x00},
+	{S1DREG_BBLT_BGC1,		0x00},
+	{S1DREG_BBLT_FGC0,		0x00},
+	{S1DREG_BBLT_FGC1,		0x00},
+	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
+	{S1DREG_LKUP_ADDR,		0x00},
+	{S1DREG_PS_CNF,			0x10},	/* Power Save disable */
+	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
+	{S1DREG_CPU2MEM_WDOGT,		0x00},
+	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
+};
+
+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
+	.initregs		= ek_s1dfb_initregs,
+	.initregssize		= ARRAY_SIZE(ek_s1dfb_initregs),
+	.platform_init_video	= ek_init_video,
+};
+
+static u64 s1dfb_dmamask = 0xffffffffUL;
+
+static struct resource ek_s1dfb_resource[] = {
+	[0] = {	/* video mem */
+		.name   = "s1d13806 memory",
+		.start  = AT91_FB_VMEM_BASE,
+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {	/* video registers */
+		.name   = "s1d13806 registers",
+		.start  = AT91_FB_REG_BASE,
+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ek_s1dfb_device = {
+	.name		= "s1d13806fb",
+	.id		= -1,
+	.dev		= {
+			.dma_mask		= &s1dfb_dmamask,
+			.coherent_dma_mask	= 0xffffffff,
+			.platform_data		= &ek_s1dfb_pdata,
+	},
+	.resource	= ek_s1dfb_resource,
+	.num_resources	= ARRAY_SIZE(ek_s1dfb_resource),
+};
+
+static void __init ek_add_device_video(void)
+{
+	platform_device_register(&ek_s1dfb_device);
+}
+#else
+static void __init ek_add_device_video(void) {}
+#endif
+
 static struct at91_eth_data __initdata ek_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
@@ -113,7 +294,7 @@
 #define EK_FLASH_SIZE	0x200000
 
 static struct physmap_flash_data ek_flash_data = {
-	.width	= 2,
+	.width		= 2,
 };
 
 static struct resource ek_flash_resource = {
@@ -132,6 +313,18 @@
 	.num_resources	= 1,
 };
 
+static struct at91_gpio_led ek_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= AT91_PIN_PB1,
+		.trigger	= "heartbeat",
+	},
+	{
+		.name		= "led1",
+		.gpio		= AT91_PIN_PB2,
+		.trigger	= "timer",
+	}
+};
 
 static void __init ek_board_init(void)
 {
@@ -154,12 +347,14 @@
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* VGA */
-//	ek_add_device_video();
+	ek_add_device_video();
 }
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-kb9202.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-kb9202.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-kb9202.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-kb9202.c	2007-03-24 16:39:15.000000000 +0100
@@ -122,7 +122,7 @@
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
+	at91_add_device_mmc(0, &kb9202_mmc_data);
 	/* I2C */
 	at91_add_device_i2c();
 	/* SPI */
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9260ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9260ek.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9260ek.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9260ek.c	2007-03-24 16:39:15.000000000 +0100
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91rm9200/board-sam9260ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -118,7 +118,7 @@
 /*
  * MACB Ethernet device
  */
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
@@ -187,7 +187,7 @@
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9261ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9261ek.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9261ek.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9261ek.c	2007-03-24 16:39:15.000000000 +0100
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91rm9200/board-sam9261ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -26,6 +26,11 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/dm9000.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+
+#include <video/atmel_lcdc.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -148,6 +153,42 @@
 
 
 /*
+ * Touchscreen ads7843
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PC2);
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min	= 150,	.x_max	= 3830,
+	.y_min	= 190,	.y_max	= 3830,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 450,
+	.y_plate_ohms		= 250,
+	.pressure_max		= 15000,
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
+
+void __init at91_add_device_ts(void)
+{
+	/* Configure Interrupt 1 as external IRQ, with pullup */
+	at91_set_B_periph(AT91_PIN_PC2, 1);		/* IRQ0 */
+	/* ts busy */
+	at91_set_gpio_input(AT91_PIN_PA11, 1);
+}
+#else
+void __init at91_add_device_ts(void) {}
+#endif
+
+
+/*
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
@@ -204,6 +245,17 @@
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	},
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias	= "ads7846",
+		.chip_select	= 2,
+		.max_speed_hz	= 125000	/* max sample rate at 3V */
+					* 26,	/* command + data + overhead */
+		.bus_num	= 0,
+		.platform_data	= &ads_info,
+		.irq		= AT91SAM9261_ID_IRQ0,
+	},
+#endif
 #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
 	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
 		.modalias	= "mtd_dataflash",
@@ -222,6 +274,64 @@
 };
 
 
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+	        .name           = "TX09D50VM1CCA @ 60",
+		.refresh	= 60,
+		.xres		= 240,		.yres		= 320,
+		.pixclock	= KHZ2PICOS(4965),
+
+		.left_margin	= 1,		.right_margin	= 33,
+		.upper_margin	= 1,		.lower_margin	= 0,
+		.hsync_len	= 5,		.vsync_len	= 1,
+
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "HIT",
+	.monitor        = "TX09D50VM1CCA",
+
+        .modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 64000,
+	.vfmin		= 50,
+	.vfmax		= 150,
+};
+
+/* Driver defaults */
+#define AT91SAM9261_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+#define AT91SAM9261_DEFAULT_FB_FLAGS	(FBINFO_DEFAULT \
+					| FBINFO_PARTIAL_PAN_OK \
+					| FBINFO_HWACCEL_XPAN \
+					| FBINFO_HWACCEL_YPAN)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.default_bpp = 16,
+	.default_dmacon = ATMEL_LCDC_DMAEN,
+	.default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
+	.default_monspecs = &at91fb_default_monspecs,
+	.default_flags = AT91SAM9261_DEFAULT_FB_FLAGS,
+	.power_control_pin = AT91_PIN_PA12,
+	.guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -243,8 +353,12 @@
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #else
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touchscreen */
+	at91_add_device_ts();
 }
 
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9263ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9263ek.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9263ek.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9263ek.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,297 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-sam9263ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 16.367 MHz crystal */
+	at91sam9263_initialize(16367660);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PA25,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * Touchscreen ads7843
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PA15);
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min	= 150,	.x_max	= 3830,
+	.y_min	= 190,	.y_max	= 3830,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 450,
+	.y_plate_ohms		= 250,
+	.pressure_max		= 15000,
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
+
+void __init at91_add_device_ts(void)
+{
+	/* Configure Interrupt 1 as external IRQ, with pullup */
+	at91_set_B_periph(AT91_PIN_PA15, 1);		/* IRQ1 */
+	/* ts busy */
+	at91_set_gpio_input(AT91_PIN_PA31, 1);
+}
+#else
+void __init at91_add_device_ts(void) {}
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias	= "ads7846",
+		.chip_select	= 3,
+		.max_speed_hz	= 125000	/* max sample rate at 3V */
+					* 26,	/* command + data + overhead */
+		.bus_num	= 0,
+		.platform_data	= &ads_info,
+		.irq		= AT91SAM9263_ID_IRQ1,
+	},
+#endif
+};
+
+/*
+ * MACB device
+ */
+static struct  __initdata  at91_eth_data ek_macb_data = {
+	.is_rmii = 1,
+};
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PE18,
+	.wp_pin		= AT91_PIN_PE19,
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 64 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+	        .name           = "TX09D50VM1CCA @ 60",
+		.refresh	= 60,
+		.xres		= 240,		.yres		= 320,
+		.pixclock	= KHZ2PICOS(4965),
+
+		.left_margin	= 1,		.right_margin	= 33,
+		.upper_margin	= 1,		.lower_margin	= 0,
+		.hsync_len	= 5,		.vsync_len	= 1,
+
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "HIT",
+	.monitor        = "TX09D70VM1CCA",
+
+        .modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 64000,
+	.vfmin		= 50,
+	.vfmax		= 150,
+};
+
+/* Driver defaults */
+#define AT91SAM9261_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+#define AT91SAM9261_DEFAULT_FB_FLAGS	(FBINFO_DEFAULT \
+					| FBINFO_PARTIAL_PAN_OK \
+					| FBINFO_HWACCEL_XPAN \
+					| FBINFO_HWACCEL_YPAN)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.default_bpp = 16,
+	.default_dmacon = ATMEL_LCDC_DMAEN,
+	.default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
+	.default_monspecs = &at91fb_default_monspecs,
+	.default_flags = AT91SAM9261_DEFAULT_FB_FLAGS,
+	.power_control_pin = AT91_PIN_PD12,
+	.guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* select SPI clk for Dataflash card slot */
+	at91_set_gpio_output(AT91_PIN_PE20, 1);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(1, &ek_mmc_data);
+	/* MACB */
+	at91_add_device_eth(&ek_macb_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touchscreen */
+	at91_add_device_ts();
+}
+
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/clock.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/clock.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/clock.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/clock.c	2007-03-24 16:39:15.000000000 +0100
@@ -375,6 +375,7 @@
 	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
 
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+#warning "Hard-coded PCK"
 	for (i = 0; i < 4; i++)
 		seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
@@ -525,27 +526,6 @@
 	return 0;
 }
 
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
-	unsigned long reg;
-	struct clk *clk;
-
-	reg = at91_sys_read(AT91_PMC_PCSR);
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->mode != pmc_periph_mode)
-			continue;
-
-		if (clk->users > 0)
-			reg &= ~clk->pmc_mask;
-	}
-
-	at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
 static struct clk *const standard_pmc_clocks[] __initdata = {
 	/* four primary clocks */
 	&clk32k,
@@ -586,7 +566,7 @@
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	/*
-	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
+	 * USB clock init:  choose 48 MHz PLLB value,
 	 * disable 48MHz clock during usb peripheral suspend.
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
@@ -596,16 +576,10 @@
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-	} else if (cpu_is_at91sam9261()) {
-		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
@@ -634,11 +608,34 @@
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-	/* disable all programmable clocks */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+	return 0;
+}
+
+/*
+ * Several unused clocks may be active.  Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+	unsigned long pcdr = 0;
+	unsigned long scdr = 0;
+	struct clk *clk;
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->users > 0)
+			continue;
+
+		if (clk->mode == pmc_periph_mode)
+			pcdr |= clk->pmc_mask;
+
+		if (clk->mode == pmc_sys_mode)
+			scdr |= clk->pmc_mask;
+
+		pr_debug("Clocks: disable unused %s\n", clk->name);
+	}
 
-	/* disable all other unused peripheral clocks */
-	at91_periphclk_reset();
+	at91_sys_write(AT91_PMC_PCDR, pcdr);
+	at91_sys_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
+late_initcall(at91_clock_reset);
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/generic.h linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/generic.h
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/generic.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/generic.h	2007-03-24 16:39:15.000000000 +0100
@@ -12,11 +12,13 @@
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/ics1523.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/ics1523.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/ics1523.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/ics1523.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-at91rm9200/ics1523.c
+ *
+ *  Copyright (C) 2003 ATMEL Rousset
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <asm/arch/ics1523.h>
+#include <asm/arch/at91_twi.h>
+#include <asm/arch/gpio.h>
+
+/* TWI Errors */
+#define	AT91_TWI_ERROR	(AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
+
+
+static void __iomem *twi_base;
+
+#define at91_twi_read(reg)		__raw_readl(twi_base + (reg))
+#define at91_twi_write(reg, val)	__raw_writel((val), twi_base + (reg))
+
+
+/* -----------------------------------------------------------------------------
+ * Initialization of TWI CLOCK
+ * ----------------------------------------------------------------------------- */
+
+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
+{
+	int sclock;
+
+	/* Here, CKDIV = 1 and CHDIV = CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
+	sclock = (10*mck_khz / ICS_TRANSFER_RATE);
+	if (sclock % 10 >= 5)
+		sclock = (sclock /10) - 5;
+	else
+		sclock = (sclock /10)- 6;
+	sclock = (sclock + (4 - sclock %4)) >> 2;	/* div 4 */
+
+	at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
+}
+
+/* -----------------------------------------------------------------------------
+ * Read a byte with TWI Interface from the Clock Generator ICS1523
+ * ----------------------------------------------------------------------------- */
+
+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
+{
+	int Status, nb_trial;
+
+	at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
+	at91_twi_write(AT91_TWI_IADR, reg_address);
+	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
+
+	/* Program temporizing period (300us) */
+	udelay(300);
+
+	/* Wait TXcomplete ... */
+	nb_trial = 0;
+	Status = at91_twi_read(AT91_TWI_SR);
+	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
+		nb_trial++;
+		Status = at91_twi_read(AT91_TWI_SR);
+	}
+
+	if (Status & AT91_TWI_TXCOMP) {
+		*data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
+		return ICS1523_ACCESS_OK;
+	}
+	else
+		return ICS1523_ACCESS_ERROR;
+}
+
+/* -----------------------------------------------------------------------------
+ * Write a byte with TWI Interface to the Clock Generator ICS1523
+ * ----------------------------------------------------------------------------- */
+
+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
+{
+	int Status, nb_trial;
+
+	at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
+	at91_twi_write(AT91_TWI_IADR, reg_address);
+	at91_twi_write(AT91_TWI_THR, data_out);
+	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
+
+	/* Program temporizing period (300us) */
+	udelay(300);
+
+	nb_trial = 0;
+	Status = at91_twi_read(AT91_TWI_SR);
+	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
+		nb_trial++;
+		if (Status & AT91_TWI_ERROR) {
+			/* If Underrun OR NACK - Start again */
+			at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
+
+			/*  Program temporizing period (300us) */
+			udelay(300);
+		}
+		Status = at91_twi_read(AT91_TWI_SR);
+	};
+
+	if (Status & AT91_TWI_TXCOMP)
+		return ICS1523_ACCESS_OK;
+	else
+		return ICS1523_ACCESS_ERROR;
+}
+
+/* -----------------------------------------------------------------------------
+ * Initialization of the Clock Generator ICS1523
+ * ----------------------------------------------------------------------------- */
+
+int at91_ics1523_init(void)
+{
+	int		nb_trial;
+	int		ack = ICS1523_ACCESS_OK;
+	unsigned int	status = 0xffffffff;
+	struct clk	*twi_clk;
+
+	/* Map in TWI peripheral */
+	twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
+	if (!twi_base)
+		return -ENOMEM;
+
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PA25, 0);            /* TWD */
+	at91_set_multi_drive(AT91_PIN_PA25, 1);
+	at91_set_A_periph(AT91_PIN_PA26, 0);            /* TWCK */
+	at91_set_multi_drive(AT91_PIN_PA26, 1);
+
+	/* Enable the TWI clock */
+	twi_clk = clk_get(NULL, "twi_clk");
+	if (IS_ERR(twi_clk))
+		return ICS1523_ACCESS_ERROR;
+	clk_enable(twi_clk);
+
+	/* Disable interrupts */
+	at91_twi_write(AT91_TWI_IDR, -1);
+
+	/* Reset peripheral */
+	at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
+
+	/* Set Master mode */
+	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
+
+	/* Set TWI Clock Waveform Generator Register */
+	at91_ics1523_SetTwiClock(60000);     /* MCK in KHz = 60000 KHz */
+
+	/* ICS1523 Initialisation */
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
+
+	nb_trial = 0;
+	do {
+		nb_trial++;
+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
+
+		/* Program 1ms temporizing period */
+		mdelay(1);
+
+		at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
+	} while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
+
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
+
+	/* Program 1ms temporizing period */
+	mdelay(1);
+
+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
+
+	/* Program 1ms temporizing period */
+	mdelay(1);
+	
+	/* All done - cleanup */
+	iounmap(twi_base);
+	clk_disable(twi_clk);
+	clk_put(twi_clk);
+
+	return ack;
+}
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Kconfig linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Kconfig
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Kconfig	2007-03-24 16:39:15.000000000 +0100
@@ -9,11 +9,14 @@
 	bool "AT91RM9200"
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260"
+	bool "AT91SAM9260 or AT91SAM9XE"
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+
 endchoice
 
 # ----------------------------------------------------------
@@ -90,13 +93,22 @@
 
 if ARCH_AT91SAM9260
 
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
+
+config ARCH_AT91SAM9260_SAM9XE
+	bool "AT91SAM9XE"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+	  They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	depends on ARCH_AT91SAM9260
 	help
-	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 endif
@@ -118,21 +130,50 @@
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK || MACH_AT91SAM9263EK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
 
+config CSB300_WAKE_SW0
+	bool "CSB300 SW0 irq0 wakeup"
+	depends on MACH_CSB337 && PM
+	help
+	  If you have a CSB300 connected to your CSB337, this lets
+	  SW0 serve as a wakeup button.  It uses IRQ0.
+
+config CSB300_WAKE_SW1
+	bool "CSB300 SW1 gpio wakeup"
+	depends on MACH_CSB337 && PM
+	help
+	  If you have a CSB300 connected to your CSB337, this lets
+	  SW1 serve as a wakeup button.  It uses GPIO.
+
 # ----------------------------------------------------------
 
 comment "AT91 Feature Selections"
@@ -143,6 +184,13 @@
 	  Select this if you need to program one or more of the PCK0..PCK3
 	  programmable clock outputs.
 
+config AT91_SLOW_CLOCK
+	bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
+	depends on PM && EXPERIMENTAL
+	help
+	  Select this if you wish to put the CPU into slow clock mode
+	  while in the "Suspend to RAM" state, to save more power.
+
 endmenu
 
 endif
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/leds.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/leds.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/leds.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/leds.c	2007-03-24 16:39:15.000000000 +0100
@@ -86,10 +86,6 @@
 	if (!at91_leds_timer || !at91_leds_cpu)
 		return -ENODEV;
 
-	/* Enable PIO to access the LEDs */
-	at91_set_gpio_output(at91_leds_timer, 1);
-	at91_set_gpio_output(at91_leds_cpu, 1);
-
 	leds_event = at91_leds_event;
 
 	leds_event(led_start);
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Makefile linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Makefile
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Makefile	2007-03-24 16:39:15.000000000 +0100
@@ -8,11 +8,13 @@
 obj-		:=
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
 
 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -31,6 +33,9 @@
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
@@ -41,7 +46,7 @@
 obj-$(CONFIG_LEDS) += $(led-y)
 
 # VGA support
-#obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
+obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
 
 
 ifeq ($(CONFIG_PM_DEBUG),y)
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm.c
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm.c	2007-03-24 16:39:15.000000000 +0100
@@ -63,6 +63,7 @@
  * Verify that all the clocks are correct before entering
  * slow-clock mode.
  */
+#warning "SAM9260 only has 3 programmable clocks."
 static int at91_pm_verify_clocks(void)
 {
 	unsigned long scsr;
@@ -80,6 +81,8 @@
 #warning "Check SAM9260 USB clocks"
 	} else if (cpu_is_at91sam9261()) {
 #warning "Check SAM9261 USB clocks"
+	} else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -205,16 +208,23 @@
 	.enter		= at91_pm_enter,
 };
 
+#ifdef CONFIG_AT91_SLOW_CLOCK
+extern void at91rm9200_slow_clock(void);
+extern u32 at91rm9200_slow_clock_sz;
+#endif
+
 static int __init at91_pm_init(void)
 {
-	printk("AT91: Power Management\n");
-
-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-	/* REVISIT allocations of SRAM should be dynamically managed.
+#ifdef CONFIG_AT91_SLOW_CLOCK
+	/*
+	 * REVISIT allocations of SRAM should be dynamically managed.
 	 * FIQ handlers and other components will want SRAM/TCM too...
 	 */
-	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
+	slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
 	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
+	printk("AT91: Power Management (with slow clock mode)\n");
+#else
+	printk("AT91: Power Management\n");
 #endif
 
 	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm_slowclock.S linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm_slowclock.S
--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm_slowclock.S	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm_slowclock.S	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91rm9200/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#define MCKRDY_TIMEOUT		1000
+#define MOSCRDY_TIMEOUT 	1000
+#define PLLALOCK_TIMEOUT	1000
+
+	.macro wait_mckrdy
+	mov	r2, #MCKRDY_TIMEOUT
+1:	sub	r2, r2, #1
+	cmp	r2, #0
+	beq	2f
+	ldr	r3, [r1, #AT91_PMC_SR]
+	tst	r3, #AT91_PMC_MCKRDY
+	beq	1b
+2:
+	.endm
+
+	.macro wait_moscrdy
+	mov	r2, #MOSCRDY_TIMEOUT
+1:	sub	r2, r2, #1
+	cmp	r2, #0
+	beq	2f
+	ldr	r3, [r1, #AT91_PMC_SR]
+	tst	r3, #AT91_PMC_MOSCS
+	beq	1b
+2:
+	.endm
+
+	.macro wait_pllalock
+	mov	r2, #PLLALOCK_TIMEOUT
+1:	sub	r2, r2, #1
+	cmp	r2, #0
+	beq	2f
+	ldr	r3, [r1, #AT91_PMC_SR]
+	tst	r3, #AT91_PMC_LOCKA
+	beq	1b
+2:
+	.endm
+
+	.macro wait_plladis
+	mov	r2, #PLLALOCK_TIMEOUT
+1:	sub	r2, r2, #1
+	cmp	r2, #0
+	beq	2f
+	ldr	r3, [r1, #AT91_PMC_SR]
+	tst	r3, #AT91_PMC_LOCKA
+	bne	1b
+2:
+	.endm
+
+	.text
+
+ENTRY(at91rm9200_slow_clock)
+
+	ldr	r1, .at91_va_base_sys
+
+	/* Put SDRAM in self refresh mode */
+
+	b	1f
+	.align	5
+1:	mcr	p15, 0, r0, c7, c10, 4
+	mov	r2, #1
+	str	r2, [r1, #AT91_SDRAMC_SRR]
+
+	/* Save Master clock setting */
+
+	ldr	r2, [r1, #AT91_PMC_MCKR]
+	str	r2, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 *
+	 * First set the CSS field, wait for MCKRDY
+	 * and than set the PRES and MDIV fields.
+	 *
+	 * See eratta #2[78] for details.
+	 */
+
+	bic	r2, r2, #3
+	str	r2, [r1, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	mov	r2, #0
+	str	r2, [r1, #AT91_PMC_MCKR]
+
+	/* Save PLLA setting and disable it */
+
+	ldr	r2, [r1, #AT91_CKGR_PLLAR]
+	str	r2, .saved_pllar
+
+	mov	r2, #0
+	str	r2, [r1, #AT91_CKGR_PLLAR]
+
+	wait_plladis
+
+	/* Turn off the main oscillator */
+
+	ldr	r2, [r1, #AT91_CKGR_MOR]
+	bic	r2, r2, #AT91_PMC_MOSCEN
+	str	r2, [r1, #AT91_CKGR_MOR]
+
+	/* Wait for interrupt */
+
+	mcr	p15, 0, r0, c7, c0, 4
+
+	/* Turn on the main oscillator */
+
+	ldr	r2, [r1, #AT91_CKGR_MOR]
+	orr	r2, r2, #AT91_PMC_MOSCEN
+	str	r2, [r1, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	/* Restore PLLA setting */
+
+	ldr	r2, .saved_pllar
+	str	r2, [r1, #AT91_CKGR_PLLAR]
+
+	wait_pllalock
+
+	/*
+	 * Restore master clock setting
+	 *
+	 * First set PRES if it was not 0,
+	 * than set CSS and MDIV fields.
+	 * After every change wait for
+	 * MCKRDY.
+	 *
+	 * See eratta #2[78] for details.
+	 */
+
+	ldr	r2, .saved_mckr
+	tst	r2, #0x1C
+	beq	2f
+	and	r2, r2, #0x1C
+	str	r2, [r1, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+2:	ldr	r2, .saved_mckr
+	str	r2, [r1, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	mov	pc, lr
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.at91_va_base_sys:
+	.word AT91_VA_BASE_SYS
+
+ENTRY(at91rm9200_slow_clock_sz)
+	.word .-at91rm9200_slow_clock
diff -urN linux-2.6.20.4-0rig/arch/arm/mm/Kconfig linux-2.6.20.4-atmel/arch/arm/mm/Kconfig
--- linux-2.6.20.4-0rig/arch/arm/mm/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/arm/mm/Kconfig	2007-03-24 16:39:15.000000000 +0100
@@ -171,8 +171,8 @@
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/atstk1002.c linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/atstk1002.c
--- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/atstk1002.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/atstk1002.c	2007-03-24 16:42:29.000000000 +0100
@@ -14,11 +14,17 @@
 #include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/spi/spi.h>
 
 #include <asm/io.h>
 #include <asm/setup.h>
+#include <asm/arch/at32ap7000.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
+#include <asm/arch/portmux.h>
+
+
+#define	SW2_DEFAULT		/* MMCI and UART_A available */
 
 struct eth_addr {
 	u8 addr[6];
@@ -29,6 +35,20 @@
 static struct eth_platform_data __initdata eth_data[2];
 extern struct lcdc_platform_data atstk1000_fb0_data;
 
+static struct spi_board_info spi0_board_info[] __initdata = {
+	{
+		/* QVGA display */
+		.modalias	= "ltv350qv",
+		.max_speed_hz	= 16000000,
+		.chip_select	= 1,
+	},
+};
+
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_NONE,
+	.wp_pin		= GPIO_PIN_NONE,
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -86,25 +106,58 @@
 
 void __init setup_board(void)
 {
-	at32_map_usart(1, 0);	/* /dev/ttyS0 */
-	at32_map_usart(2, 1);	/* /dev/ttyS1 */
-	at32_map_usart(3, 2);	/* /dev/ttyS2 */
+#ifdef	SW2_DEFAULT
+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+#else
+	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
+#endif
+	/* USART 2/unused: expansion connector */
+	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
 
 	at32_setup_serial_console(0);
 }
 
 static int __init atstk1002_init(void)
 {
+	/*
+	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
+	 * SDRAM-specific pins so that nobody messes with them.
+	 */
+	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
+	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
+	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
+	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
+	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
+	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
+	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
+	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
+	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
+	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
+	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
+	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
+	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
+	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
+	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
+	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
+	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+
 	at32_add_system_devices();
 
+#ifdef	SW2_DEFAULT
 	at32_add_device_usart(0);
+#else
 	at32_add_device_usart(1);
+#endif
 	at32_add_device_usart(2);
 
 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
 
-	at32_add_device_spi(0);
+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_twi(0);
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_lcdc(0, &atstk1000_fb0_data);
+	at32_add_device_usba(0);
+	at32_add_device_abdac(0);
 
 	return 0;
 }
diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/Makefile linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/Makefile
--- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/Makefile	2007-03-24 16:42:28.000000000 +0100
@@ -1,2 +1,2 @@
-obj-y				+= setup.o spi.o flash.o
+obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/spi.c linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/spi.c
--- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/spi.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/spi.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,27 +0,0 @@
-/*
- * ATSTK1000 SPI devices
- *
- * Copyright (C) 2005 Atmel Norway
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "ltv350qv",
-		.max_speed_hz	= 16000000,
-		.bus_num	= 0,
-		.chip_select	= 1,
-	},
-};
-
-static int board_init_spi(void)
-{
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	return 0;
-}
-arch_initcall(board_init_spi);
diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.c linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.c
--- linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,761 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/dma-controller.h>
+#include <asm/io.h>
+
+#include "dw-dmac.h"
+
+#define DMAC_NR_CHANNELS 3
+#define DMAC_MAX_BLOCKSIZE 4095
+
+enum {
+	CH_STATE_FREE = 0,
+	CH_STATE_ALLOCATED,
+	CH_STATE_BUSY,
+};
+
+struct dw_dma_lli {
+	dma_addr_t	sar;
+	dma_addr_t	dar;
+	dma_addr_t	llp;
+	u32		ctllo;
+	u32		ctlhi;
+	u32		sstat;
+	u32		dstat;
+};
+
+struct dw_dma_block {
+	struct dw_dma_lli *lli_vaddr;
+	dma_addr_t lli_dma_addr;
+};
+
+struct dw_dma_channel {
+	unsigned int state;
+        int is_cyclic;
+	struct dma_request_sg *req_sg;
+	struct dma_request_cyclic *req_cyclic;
+	unsigned int nr_blocks;
+	int direction;
+	struct dw_dma_block *block;
+};
+
+struct dw_dma_controller {
+	spinlock_t lock;
+	void * __iomem	regs;
+	struct dma_pool *lli_pool;
+	struct clk *hclk;
+	struct dma_controller dma;
+	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
+};
+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
+
+#define dmac_writel_hi(dmac, reg, value) \
+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
+#define dmac_readl_hi(dmac, reg) \
+	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
+#define dmac_writel_lo(dmac, reg, value) \
+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
+#define dmac_readl_lo(dmac, reg) \
+	__raw_readl((dmac)->regs + DW_DMAC_##reg)
+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
+	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
+			       + DW_DMAC_CHAN_##reg + 4))
+#define dmac_chan_readl_hi(dmac, chan, reg) \
+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
+	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
+#define dmac_chan_readl_lo(dmac, chan, reg) \
+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
+#define set_channel_bit(dmac, reg, chan) \
+	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
+#define clear_channel_bit(dmac, reg, chan) \
+	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
+
+static int dmac_alloc_channel(struct dma_controller *_dmac)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dmac->lock, flags);
+	for (i = 0; i < DMAC_NR_CHANNELS; i++)
+		if (dmac->channel[i].state == CH_STATE_FREE)
+			break;
+
+	if (i < DMAC_NR_CHANNELS) {
+		chan = &dmac->channel[i];
+		chan->state = CH_STATE_ALLOCATED;
+	} else {
+		i = -EBUSY;
+	}
+
+	spin_unlock_irqrestore(&dmac->lock, flags);
+
+	return i;
+}
+
+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS
+	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
+
+	dmac->channel[channel].state = CH_STATE_FREE;
+}
+
+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
+					    unsigned int nr_blocks)
+{
+	struct dw_dma_block *block;
+	void *p;
+	unsigned int i;
+
+	block = kmalloc(nr_blocks * sizeof(*block),
+			GFP_KERNEL);
+	if (unlikely(!block))
+		return NULL;
+
+	for (i = 0; i < nr_blocks; i++) {
+		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
+				   &block[i].lli_dma_addr);
+		block[i].lli_vaddr = p;
+		if (unlikely(!p))
+			goto fail;
+	}
+
+	return block;
+
+fail:
+	for (i = 0; i < nr_blocks; i++) {
+		if (!block[i].lli_vaddr)
+			break;
+		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
+			      block[i].lli_dma_addr);
+	}
+	kfree(block);
+	return NULL;
+}
+
+static void cleanup_channel(struct dw_dma_controller *dmac,
+			    struct dw_dma_channel *chan)
+{
+	unsigned int i;
+
+	if (chan->nr_blocks > 1) {
+		for (i = 0; i < chan->nr_blocks; i++)
+			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
+				      chan->block[i].lli_dma_addr);
+		kfree(chan->block);
+	}
+
+	chan->state = CH_STATE_ALLOCATED;
+}
+
+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
+				   struct dma_request_sg *req)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+	unsigned long ctlhi, ctllo, cfghi, cfglo;
+	unsigned long block_size;
+	unsigned int nr_blocks;
+	int ret, i, direction;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmac->lock, flags);
+
+	ret = -EINVAL;
+	if (req->req.channel >= DMAC_NR_CHANNELS
+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
+	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
+		spin_unlock_irqrestore(&dmac->lock, flags);
+		return -EINVAL;
+	}
+
+	chan = &dmac->channel[req->req.channel];
+	chan->state = CH_STATE_BUSY;
+	chan->req_sg = req;
+	chan->is_cyclic = 0;
+
+	/*
+	 * We have marked the channel as busy, so no need to keep the
+	 * lock as long as we only touch the channel-specific
+	 * registers
+	 */
+	spin_unlock_irqrestore(&dmac->lock, flags);
+
+	/*
+	 * There may be limitations in the driver and/or the DMA
+	 * controller that prevents us from sending a whole
+	 * scatterlist item in one go.  Taking this into account,
+	 * calculate the number of block transfers we need to set up.
+	 *
+	 * FIXME: Let the peripheral driver know about the maximum
+	 * block size we support. We really don't want to use a
+	 * different block size than what was suggested by the
+	 * peripheral.
+	 *
+	 * Each block will get its own Linked List Item (LLI) below.
+	 */
+	block_size = req->block_size;
+	nr_blocks = req->nr_blocks;
+	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
+		 block_size, nr_blocks, req->nr_sg);
+
+	BUG_ON(nr_blocks == 0);
+	chan->nr_blocks = nr_blocks;
+
+	ret = -EINVAL;
+	cfglo = cfghi = 0;
+	switch (req->direction) {
+	case DMA_DIR_MEM_TO_PERIPH:
+		direction = DMA_TO_DEVICE;
+		cfghi = req->periph_id << (43 - 32);
+		break;
+
+	case DMA_DIR_PERIPH_TO_MEM:
+		direction = DMA_FROM_DEVICE;
+		cfghi = req->periph_id << (39 - 32);
+		break;
+	default:
+		goto out_unclaim_channel;
+	}
+
+        chan->direction = direction;
+
+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
+	ctlhi = block_size >> req->width;
+	ctllo = ((req->direction << 20)
+		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
+		 | (req->width << 4) | (req->width << 1)
+		 | (1 << 0));		 // interrupt enable
+
+	if (nr_blocks == 1) {
+		/* Only one block: No need to use block chaining */
+		if (direction == DMA_TO_DEVICE) {
+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
+					    req->sg->dma_address);
+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
+					    req->data_reg);
+			ctllo |= 2 << 7; // no dst increment
+		} else {
+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
+					    req->data_reg);
+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
+					    req->sg->dma_address);
+			ctllo |= 2 << 9; // no src increment
+		}
+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
+		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
+	} else {
+		struct dw_dma_lli *lli, *lli_prev = NULL;
+		int j = 0, offset = 0;
+
+		ret = -ENOMEM;
+		chan->block = allocate_blocks(dmac, nr_blocks);
+		if (!chan->block)
+			goto out_unclaim_channel;
+
+		if (direction == DMA_TO_DEVICE)
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
+		else
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
+		/*
+		 * Map scatterlist items to blocks. One scatterlist
+		 * item may need more than one block for the reasons
+		 * mentioned above.
+		 */
+		for (i = 0; i < nr_blocks; i++) {
+			lli = chan->block[i].lli_vaddr;
+			if (lli_prev) {
+				lli_prev->llp = chan->block[i].lli_dma_addr;
+				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+					 i - 1, chan->block[i - 1].lli_vaddr,
+					 chan->block[i - 1].lli_dma_addr,
+					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
+					 lli_prev->ctllo, lli_prev->ctlhi);
+			}
+			lli->llp = 0;
+			lli->ctllo = ctllo;
+			lli->ctlhi = ctlhi;
+			if (direction == DMA_TO_DEVICE) {
+				lli->sar = req->sg[j].dma_address + offset;
+				lli->dar = req->data_reg;
+			} else {
+				lli->sar = req->data_reg;
+				lli->dar = req->sg[j].dma_address + offset;
+			}
+			lli_prev = lli;
+
+			offset += block_size;
+			if (offset > req->sg[j].length) {
+				j++;
+				offset = 0;
+			}
+		}
+
+		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+			 i - 1, chan->block[i - 1].lli_vaddr,
+			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
+			 lli_prev->dar, lli_prev->llp,
+			 lli_prev->ctllo, lli_prev->ctlhi);
+
+		/*
+		 * SAR, DAR and CTL are initialized from the LLI. We
+		 * only have to enable the LLI bits in CTL.
+		 */
+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
+				    chan->block[0].lli_dma_addr);
+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+	}
+
+	set_channel_bit(dmac, MASK_XFER, req->req.channel);
+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
+	if (req->req.block_complete)
+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+	else
+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
+	return 0;
+
+out_unclaim_channel:
+	chan->state = CH_STATE_ALLOCATED;
+	return ret;
+}
+
+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
+                                       struct dma_request_cyclic *req)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+	unsigned long ctlhi, ctllo, cfghi, cfglo;
+	unsigned long block_size;
+	int ret, i, direction;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmac->lock, flags);
+
+        block_size = (req->buffer_size/req->periods) >> req->width;
+
+	ret = -EINVAL;
+	if (req->req.channel >= DMAC_NR_CHANNELS
+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
+            || (req->periods == 0)
+	    || block_size > DMAC_MAX_BLOCKSIZE) {
+		spin_unlock_irqrestore(&dmac->lock, flags);
+		return -EINVAL;
+	}
+
+	chan = &dmac->channel[req->req.channel];
+	chan->state = CH_STATE_BUSY;
+	chan->is_cyclic = 1;
+        chan->req_cyclic = req;
+
+	/*
+	 * We have marked the channel as busy, so no need to keep the
+	 * lock as long as we only touch the channel-specific
+	 * registers
+	 */
+	spin_unlock_irqrestore(&dmac->lock, flags);
+
+	/*
+          Setup
+	 */
+	BUG_ON(req->buffer_size % req->periods);
+	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
+
+	chan->nr_blocks = req->periods;
+
+	ret = -EINVAL;
+	cfglo = cfghi = 0;
+	switch (req->direction) {
+	case DMA_DIR_MEM_TO_PERIPH:
+		direction = DMA_TO_DEVICE;
+		cfghi = req->periph_id << (43 - 32);
+		break;
+
+	case DMA_DIR_PERIPH_TO_MEM:
+		direction = DMA_FROM_DEVICE;
+		cfghi = req->periph_id << (39 - 32);
+		break;
+	default:
+		goto out_unclaim_channel;
+	}
+
+        chan->direction = direction;
+
+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
+	ctlhi = block_size;
+	ctllo = ((req->direction << 20)
+		 | (req->width << 4) | (req->width << 1)
+		 | (1 << 0));		 // interrupt enable
+
+        {
+		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
+
+		ret = -ENOMEM;
+		chan->block = allocate_blocks(dmac, req->periods);
+		if (!chan->block)
+			goto out_unclaim_channel;
+
+		if (direction == DMA_TO_DEVICE)
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
+		else
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
+		/*
+		 * Set up a linked list items where each period gets
+		 * an item. The linked list item for the last period
+		 * points back to the star of the buffer making a
+		 * cyclic buffer.
+		 */
+		for (i = 0; i < req->periods; i++) {
+			lli = chan->block[i].lli_vaddr;
+			if (lli_prev) {
+				lli_prev->llp = chan->block[i].lli_dma_addr;
+				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+				   i - 1, chan->block[i - 1].lli_vaddr,
+				   chan->block[i - 1].lli_dma_addr,
+				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
+				   lli_prev->ctllo, lli_prev->ctlhi);*/
+			}
+			lli->llp = 0;
+			lli->ctllo = ctllo;
+			lli->ctlhi = ctlhi;
+			if (direction == DMA_TO_DEVICE) {
+				lli->sar = req->buffer_start + i*(block_size << req->width);
+				lli->dar = req->data_reg;
+			} else {
+				lli->sar = req->data_reg;
+				lli->dar = req->buffer_start + i*(block_size << req->width);
+			}
+			lli_prev = lli;
+		}
+		lli->llp = chan->block[0].lli_dma_addr;
+
+		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+		  i - 1, chan->block[i - 1].lli_vaddr,
+		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
+		  lli_prev->dar, lli_prev->llp,
+		  lli_prev->ctllo, lli_prev->ctlhi); */
+
+		/*
+		 * SAR, DAR and CTL are initialized from the LLI. We
+		 * only have to enable the LLI bits in CTL.
+		 */
+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
+				    chan->block[0].lli_dma_addr);
+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+	}
+
+	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
+	if (req->req.block_complete)
+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+	else
+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
+	return 0;
+
+out_unclaim_channel:
+	chan->state = CH_STATE_ALLOCATED;
+	return ret;
+}
+
+static int dmac_start_request(struct dma_controller *_dmac,
+			      unsigned int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS);
+
+	set_channel_bit(dmac, CH_EN, channel);
+
+	return 0;
+}
+
+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
+                                       unsigned int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+        dma_addr_t current_pos;
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS);
+
+        chan = &dmac->channel[channel];
+
+	switch (chan->direction) {
+	case DMA_TO_DEVICE:
+		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
+		break;
+	case DMA_FROM_DEVICE:
+		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
+		break;
+	default:
+		return 0;
+	}
+
+
+        if (!current_pos) {
+		if (chan->is_cyclic) {
+			current_pos = chan->req_cyclic->buffer_start;
+		} else {
+			current_pos = chan->req_sg->sg->dma_address;
+		}
+	}
+
+	return current_pos;
+}
+
+
+static int dmac_stop_request(struct dma_controller *_dmac,
+                             unsigned int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS);
+
+	chan = &dmac->channel[channel];
+	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
+		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
+		 dmac_chan_readl_lo(dmac, channel, DAR),
+		 dmac_chan_readl_lo(dmac, channel, LLP),
+		 dmac_chan_readl_hi(dmac, channel, CTL),
+		 dmac_chan_readl_lo(dmac, channel, CTL));
+
+	if (chan->state == CH_STATE_BUSY) {
+		clear_channel_bit(dmac, CH_EN, channel);
+		cleanup_channel(dmac, &dmac->channel[channel]);
+	}
+
+	return 0;
+}
+
+
+static void dmac_block_complete(struct dw_dma_controller *dmac)
+{
+	struct dw_dma_channel *chan;
+	unsigned long status, chanid;
+
+	status = dmac_readl_lo(dmac, STATUS_BLOCK);
+
+	while (status) {
+		struct dma_request *req;
+		chanid = __ffs(status);
+		chan = &dmac->channel[chanid];
+
+                if (chan->is_cyclic) {
+			BUG_ON(!chan->req_cyclic
+			       || !chan->req_cyclic->req.block_complete);
+			req = &chan->req_cyclic->req;
+                } else {
+			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
+			req = &chan->req_sg->req;
+                }
+		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
+		req->block_complete(req);
+		status = dmac_readl_lo(dmac, STATUS_BLOCK);
+	}
+}
+
+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
+{
+	struct dw_dma_channel *chan;
+	struct dma_request *req;
+	unsigned long status, chanid;
+
+	status = dmac_readl_lo(dmac, STATUS_XFER);
+
+	while (status) {
+		chanid = __ffs(status);
+		chan = &dmac->channel[chanid];
+
+		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
+
+                req = &chan->req_sg->req;
+                BUG_ON(!req);
+                cleanup_channel(dmac, chan);
+                if (req->xfer_complete)
+			req->xfer_complete(req);
+
+		status = dmac_readl_lo(dmac, STATUS_XFER);
+	}
+}
+
+static void dmac_error(struct dw_dma_controller *dmac)
+{
+	struct dw_dma_channel *chan;
+	unsigned long status, chanid;
+
+	status = dmac_readl_lo(dmac, STATUS_ERROR);
+
+	while (status) {
+		struct dma_request *req;
+
+		chanid = __ffs(status);
+		chan = &dmac->channel[chanid];
+
+		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
+		clear_channel_bit(dmac, CH_EN, chanid);
+
+                if (chan->is_cyclic) {
+			BUG_ON(!chan->req_cyclic);
+			req = &chan->req_cyclic->req;
+                } else {
+			BUG_ON(!chan->req_sg);
+			req = &chan->req_sg->req;
+                }
+
+		cleanup_channel(dmac, chan);
+		if (req->error)
+			req->error(req);
+
+		status = dmac_readl_lo(dmac, STATUS_XFER);
+	}
+}
+
+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
+{
+	struct dw_dma_controller *dmac = dev_id;
+	unsigned long status;
+	int ret = IRQ_NONE;
+
+	spin_lock(&dmac->lock);
+
+	status = dmac_readl_lo(dmac, STATUS_INT);
+
+	while (status) {
+		ret = IRQ_HANDLED;
+		if (status & 0x10)
+			dmac_error(dmac);
+		if (status & 0x02)
+			dmac_block_complete(dmac);
+		if (status & 0x01)
+			dmac_xfer_complete(dmac);
+
+		status = dmac_readl_lo(dmac, STATUS_INT);
+	}
+
+	spin_unlock(&dmac->lock);
+	return ret;
+}
+
+static int __devinit dmac_probe(struct platform_device *pdev)
+{
+	struct dw_dma_controller *dmac;
+	struct resource *regs;
+	int ret;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
+	if (!dmac)
+		return -ENOMEM;
+	memset(dmac, 0, sizeof(*dmac));
+
+	dmac->hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(dmac->hclk)) {
+		ret = PTR_ERR(dmac->hclk);
+		goto out_free_dmac;
+	}
+	clk_enable(dmac->hclk);
+
+	ret = -ENOMEM;
+	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
+					 sizeof(struct dw_dma_lli), 4, 0);
+	if (!dmac->lli_pool)
+		goto out_disable_clk;
+
+	spin_lock_init(&dmac->lock);
+	dmac->dma.dev = &pdev->dev;
+	dmac->dma.alloc_channel = dmac_alloc_channel;
+	dmac->dma.release_channel = dmac_release_channel;
+	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
+	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
+	dmac->dma.start_request = dmac_start_request;
+	dmac->dma.stop_request = dmac_stop_request;
+	dmac->dma.get_current_pos = dmac_get_current_pos;
+
+	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!dmac->regs)
+		goto out_free_pool;
+
+	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
+			  SA_SAMPLE_RANDOM, pdev->name, dmac);
+	if (ret)
+		goto out_unmap_regs;
+
+	/* Enable the DMA controller */
+	dmac_writel_lo(dmac, CFG, 1);
+
+	register_dma_controller(&dmac->dma);
+
+	printk(KERN_INFO
+	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
+	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
+
+	return 0;
+
+out_unmap_regs:
+	iounmap(dmac->regs);
+out_free_pool:
+	dma_pool_destroy(dmac->lli_pool);
+out_disable_clk:
+	clk_disable(dmac->hclk);
+	clk_put(dmac->hclk);
+out_free_dmac:
+	kfree(dmac);
+	return ret;
+}
+
+static struct platform_driver dmac_driver = {
+	.probe		= dmac_probe,
+	.driver		= {
+		.name		= "dmaca",
+	},
+};
+
+static int __init dmac_init(void)
+{
+	return platform_driver_register(&dmac_driver);
+}
+subsys_initcall(dmac_init);
+
+static void __exit dmac_exit(void)
+{
+	platform_driver_unregister(&dmac_driver);
+}
+module_exit(dmac_exit);
+
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.h linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.h
--- linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,42 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AVR32_DW_DMAC_H__
+#define __AVR32_DW_DMAC_H__
+
+#define DW_DMAC_CFG		0x398
+#define DW_DMAC_CH_EN		0x3a0
+
+#define DW_DMAC_STATUS_XFER	0x2e8
+#define DW_DMAC_STATUS_BLOCK	0x2f0
+#define DW_DMAC_STATUS_ERROR	0x308
+
+#define DW_DMAC_MASK_XFER	0x310
+#define DW_DMAC_MASK_BLOCK	0x318
+#define DW_DMAC_MASK_ERROR	0x330
+
+#define DW_DMAC_CLEAR_XFER	0x338
+#define DW_DMAC_CLEAR_BLOCK	0x340
+#define DW_DMAC_CLEAR_ERROR	0x358
+
+#define DW_DMAC_STATUS_INT	0x360
+
+#define DW_DMAC_CHAN_SAR	0x000
+#define DW_DMAC_CHAN_DAR	0x008
+#define DW_DMAC_CHAN_LLP	0x010
+#define DW_DMAC_CHAN_CTL	0x018
+#define DW_DMAC_CHAN_SSTAT	0x020
+#define DW_DMAC_CHAN_DSTAT	0x028
+#define DW_DMAC_CHAN_SSTATAR	0x030
+#define DW_DMAC_CHAN_DSTATAR	0x038
+#define DW_DMAC_CHAN_CFG	0x040
+#define DW_DMAC_CHAN_SGR	0x048
+#define DW_DMAC_CHAN_DSR	0x050
+
+#endif /* __AVR32_DW_DMAC_H__ */
diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/Makefile linux-2.6.20.4-atmel/arch/avr32/drivers/Makefile
--- linux-2.6.20.4-0rig/arch/avr32/drivers/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/drivers/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1 @@
+obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
diff -urN linux-2.6.20.4-0rig/arch/avr32/Kconfig linux-2.6.20.4-atmel/arch/avr32/Kconfig
--- linux-2.6.20.4-0rig/arch/avr32/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -112,6 +112,8 @@
 	bool "U-Boot (or similar) bootloader"
 endchoice
 
+source "arch/avr32/mach-at32ap/Kconfig"
+
 config LOAD_ADDRESS
 	hex
 	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
@@ -160,6 +162,10 @@
 	  enabling Nexus-compliant debuggers to keep track of the PID of the
 	  currently executing task.
 
+config DW_DMAC
+	tristate "Synopsys DesignWare DMA Controller support"
+	default y if CPU_AT32AP7000
+
 # FPU emulation goes here
 
 source "kernel/Kconfig.hz"
@@ -195,6 +201,8 @@
 
 source "fs/Kconfig"
 
+source "arch/avr32/oprofile/Kconfig"
+
 source "arch/avr32/Kconfig.debug"
 
 source "security/Kconfig"
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/cpu.c linux-2.6.20.4-atmel/arch/avr32/kernel/cpu.c
--- linux-2.6.20.4-0rig/arch/avr32/kernel/cpu.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/cpu.c	2007-03-24 16:42:28.000000000 +0100
@@ -9,6 +9,7 @@
 #include <linux/sysdev.h>
 #include <linux/seq_file.h>
 #include <linux/cpu.h>
+#include <linux/module.h>
 #include <linux/percpu.h>
 #include <linux/param.h>
 #include <linux/errno.h>
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/dma-controller.c linux-2.6.20.4-atmel/arch/avr32/kernel/dma-controller.c
--- linux-2.6.20.4-0rig/arch/avr32/kernel/dma-controller.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/dma-controller.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,34 @@
+/*
+ * Preliminary DMA controller framework for AVR32
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/dma-controller.h>
+
+static LIST_HEAD(controllers);
+
+int register_dma_controller(struct dma_controller *dmac)
+{
+	static int next_id;
+
+	dmac->id = next_id++;
+	list_add_tail(&dmac->list, &controllers);
+
+	return 0;
+}
+EXPORT_SYMBOL(register_dma_controller);
+
+struct dma_controller *find_dma_controller(int id)
+{
+	struct dma_controller *dmac;
+
+	list_for_each_entry(dmac, &controllers, list)
+		if (dmac->id == id)
+			return dmac;
+	return NULL;
+}
+EXPORT_SYMBOL(find_dma_controller);
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/irq.c linux-2.6.20.4-atmel/arch/avr32/kernel/irq.c
--- linux-2.6.20.4-0rig/arch/avr32/kernel/irq.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/irq.c	2007-03-24 16:42:28.000000000 +0100
@@ -57,6 +57,7 @@
 		seq_printf(p, "%3d: ", i);
 		for_each_online_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+		seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/Makefile linux-2.6.20.4-atmel/arch/avr32/kernel/Makefile
--- linux-2.6.20.4-0rig/arch/avr32/kernel/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -9,6 +9,7 @@
 obj-y				+= setup.o traps.o semaphore.o ptrace.o
 obj-y				+= signal.o sys_avr32.o process.o time.o
 obj-y				+= init_task.o switch_to.o cpu.o
+obj-y				+= dma-controller.o
 obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/setup.c linux-2.6.20.4-atmel/arch/avr32/kernel/setup.c
--- linux-2.6.20.4-0rig/arch/avr32/kernel/setup.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/setup.c	2007-03-24 16:42:28.000000000 +0100
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
+#include <linux/kernel.h>
 
 #include <asm/sections.h>
 #include <asm/processor.h>
@@ -174,8 +175,7 @@
 	 * Copy the data so the bootmem init code doesn't need to care
 	 * about it.
 	 */
-	if (mem_range_next_free >=
-	    (sizeof(mem_range_cache) / sizeof(mem_range_cache[0])))
+	if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
 		panic("Physical memory map too complex!\n");
 
 	new = &mem_range_cache[mem_range_next_free++];
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/syscall_table.S linux-2.6.20.4-atmel/arch/avr32/kernel/syscall_table.S
--- linux-2.6.20.4-0rig/arch/avr32/kernel/syscall_table.S	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/syscall_table.S	2007-03-24 16:42:28.000000000 +0100
@@ -8,14 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
-#define sys_nfsservctl sys_ni_syscall
-#endif
-
-#if !defined(CONFIG_SYSV_IPC)
-# define sys_ipc	sys_ni_syscall
-#endif
-
 	.section .rodata,"a",@progbits
 	.type	sys_call_table,@object
 	.global	sys_call_table
@@ -129,7 +121,7 @@
 	.long	sys_getitimer		/* 105 */
 	.long	sys_swapoff
 	.long	sys_sysinfo
-	.long	sys_ipc
+	.long	sys_ni_syscall		/* was sys_ipc briefly */
 	.long	sys_sendfile
 	.long	sys_setdomainname	/* 110 */
 	.long	sys_newuname
@@ -287,4 +279,16 @@
 	.long	sys_tee
 	.long	sys_vmsplice
 	.long	__sys_epoll_pwait	/* 265 */
+	.long	sys_msgget
+	.long	sys_msgsnd
+	.long	sys_msgrcv
+	.long	sys_msgctl
+	.long	sys_semget		/* 270 */
+	.long	sys_semop
+	.long	sys_semctl
+	.long	sys_semtimedop
+	.long	sys_shmat
+	.long	sys_shmget		/* 275 */
+	.long	sys_shmdt
+	.long	sys_shmctl
 	.long	sys_ni_syscall		/* r8 is saturated at nr_syscalls */
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/time.c linux-2.6.20.4-atmel/arch/avr32/kernel/time.c
--- linux-2.6.20.4-0rig/arch/avr32/kernel/time.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/time.c	2007-03-24 16:42:29.000000000 +0100
@@ -21,6 +21,7 @@
 #include <linux/profile.h>
 #include <linux/sysdev.h>
 
+#include <asm/intc.h>
 #include <asm/div64.h>
 #include <asm/sysreg.h>
 #include <asm/io.h>
@@ -136,6 +137,10 @@
 {
 	unsigned int count;
 
+	/* Check if interrupt is timer or performance counters */
+	if (!(intc_get_pending(irq) & 1))
+		return IRQ_NONE;
+
 	/* ack timer interrupt and try to set next interrupt */
 	count = avr32_hpt_read();
 	avr32_timer_ack();
@@ -164,7 +169,7 @@
 
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
+	.flags		= IRQF_DISABLED|IRQF_SHARED,
 	.name		= "timer",
 };
 
diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/traps.c linux-2.6.20.4-atmel/arch/avr32/kernel/traps.c
--- linux-2.6.20.4-0rig/arch/avr32/kernel/traps.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/kernel/traps.c	2007-03-24 16:42:28.000000000 +0100
@@ -49,39 +49,45 @@
 	return;
 }
 
+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
+{
+	return (p > (unsigned long)tinfo)
+		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
+}
+
 #ifdef CONFIG_FRAME_POINTER
 static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
 				struct pt_regs *regs)
 {
-	unsigned long __user *fp;
-	unsigned long __user *last_fp = NULL;
+	unsigned long lr, fp;
+	struct thread_info *tinfo;
 
-	if (regs) {
-		fp = (unsigned long __user *)regs->r7;
-	} else if (tsk == current) {
-		register unsigned long __user *real_fp __asm__("r7");
-		fp = real_fp;
-	} else {
-		fp = (unsigned long __user *)tsk->thread.cpu_context.r7;
-	}
+	tinfo = (struct thread_info *)
+		((unsigned long)sp & ~(THREAD_SIZE - 1));
+
+	if (regs)
+		fp = regs->r7;
+	else if (tsk == current)
+		asm("mov %0, r7" : "=r"(fp));
+	else
+		fp = tsk->thread.cpu_context.r7;
 
 	/*
-	 * Walk the stack until (a) we get an exception, (b) the frame
-	 * pointer becomes zero, or (c) the frame pointer gets stuck
-	 * at the same value.
+	 * Walk the stack as long as the frame pointer (a) is within
+	 * the kernel stack of the task, and (b) it doesn't move
+	 * downwards.
 	 */
-	while (fp && fp != last_fp) {
-		unsigned long lr, new_fp = 0;
-
-		last_fp = fp;
-		if (__get_user(lr, fp))
-			break;
-		if (fp && __get_user(new_fp, fp + 1))
-			break;
-		fp = (unsigned long __user *)new_fp;
+	while (valid_stack_ptr(tinfo, fp)) {
+		unsigned long new_fp;
 
+		lr = *(unsigned long *)fp;
 		printk(" [<%08lx>] ", lr);
 		print_symbol("%s\n", lr);
+
+		new_fp = *(unsigned long *)(fp + 4);
+		if (new_fp <= fp)
+			break;
+		fp = new_fp;
 	}
 	printk("\n");
 }
diff -urN linux-2.6.20.4-0rig/arch/avr32/lib/libgcc.h linux-2.6.20.4-atmel/arch/avr32/lib/libgcc.h
--- linux-2.6.20.4-0rig/arch/avr32/lib/libgcc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/lib/libgcc.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,33 +0,0 @@
-/* Definitions for various functions 'borrowed' from gcc-3.4.3 */
-
-#define BITS_PER_UNIT	8
-
-typedef		 int QItype	__attribute__ ((mode (QI)));
-typedef unsigned int UQItype	__attribute__ ((mode (QI)));
-typedef		 int HItype	__attribute__ ((mode (HI)));
-typedef unsigned int UHItype	__attribute__ ((mode (HI)));
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef unsigned int UDItype	__attribute__ ((mode (DI)));
-typedef 	float SFtype	__attribute__ ((mode (SF)));
-typedef		float DFtype	__attribute__ ((mode (DF)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-#define W_TYPE_SIZE (4 * BITS_PER_UNIT)
-#define Wtype	SItype
-#define UWtype	USItype
-#define HWtype	SItype
-#define UHWtype	USItype
-#define DWtype	DItype
-#define UDWtype	UDItype
-#define __NW(a,b)	__ ## a ## si ## b
-#define __NDW(a,b)	__ ## a ## di ## b
-
-struct DWstruct {Wtype high, low;};
-
-typedef union
-{
-  struct DWstruct s;
-  DWtype ll;
-} DWunion;
diff -urN linux-2.6.20.4-0rig/arch/avr32/lib/longlong.h linux-2.6.20.4-atmel/arch/avr32/lib/longlong.h
--- linux-2.6.20.4-0rig/arch/avr32/lib/longlong.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/lib/longlong.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,98 +0,0 @@
-/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
-   Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-   Free Software Foundation, Inc.
-
-   This definition file is free software; you can redistribute it
-   and/or modify it under the terms of the GNU General Public
-   License as published by the Free Software Foundation; either
-   version 2, or (at your option) any later version.
-
-   This definition file is distributed in the hope that it will be
-   useful, but WITHOUT ANY WARRANTY; without even the implied
-   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-   See the GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Borrowed from gcc-3.4.3 */
-
-#define __BITS4 (W_TYPE_SIZE / 4)
-#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-#define count_leading_zeros(count, x) ((count) = __builtin_clz(x))
-
-#define __udiv_qrnnd_c(q, r, n1, n0, d) \
-  do {									\
-    UWtype __d1, __d0, __q1, __q0;					\
-    UWtype __r1, __r0, __m;						\
-    __d1 = __ll_highpart (d);						\
-    __d0 = __ll_lowpart (d);						\
-									\
-    __r1 = (n1) % __d1;							\
-    __q1 = (n1) / __d1;							\
-    __m = (UWtype) __q1 * __d0;						\
-    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
-    if (__r1 < __m)							\
-      {									\
-	__q1--, __r1 += (d);						\
-	if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
-	  if (__r1 < __m)						\
-	    __q1--, __r1 += (d);					\
-      }									\
-    __r1 -= __m;							\
-									\
-    __r0 = __r1 % __d1;							\
-    __q0 = __r1 / __d1;							\
-    __m = (UWtype) __q0 * __d0;						\
-    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
-    if (__r0 < __m)							\
-      {									\
-	__q0--, __r0 += (d);						\
-	if (__r0 >= (d))						\
-	  if (__r0 < __m)						\
-	    __q0--, __r0 += (d);					\
-      }									\
-    __r0 -= __m;							\
-									\
-    (q) = (UWtype) __q1 * __ll_B | __q0;				\
-    (r) = __r0;								\
-  } while (0)
-
-#define udiv_qrnnd __udiv_qrnnd_c
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-  do {									\
-    UWtype __x;								\
-    __x = (al) - (bl);							\
-    (sh) = (ah) - (bh) - (__x > (al));					\
-    (sl) = __x;								\
-  } while (0)
-
-#define umul_ppmm(w1, w0, u, v)						\
-  do {									\
-    UWtype __x0, __x1, __x2, __x3;					\
-    UHWtype __ul, __vl, __uh, __vh;					\
-									\
-    __ul = __ll_lowpart (u);						\
-    __uh = __ll_highpart (u);						\
-    __vl = __ll_lowpart (v);						\
-    __vh = __ll_highpart (v);						\
-									\
-    __x0 = (UWtype) __ul * __vl;					\
-    __x1 = (UWtype) __ul * __vh;					\
-    __x2 = (UWtype) __uh * __vl;					\
-    __x3 = (UWtype) __uh * __vh;					\
-									\
-    __x1 += __ll_highpart (__x0);/* this can't give carry */		\
-    __x1 += __x2;		/* but this indeed can */		\
-    if (__x1 < __x2)		/* did we get it? */			\
-      __x3 += __ll_B;		/* yes, add it in the proper pos.  */	\
-									\
-    (w1) = __x3 + __ll_highpart (__x1);					\
-    (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0);		\
-  } while (0)
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/at32ap7000.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/at32ap7000.c
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/at32ap7000.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/at32ap7000.c	2007-03-24 16:42:29.000000000 +0100
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/io.h>
 
@@ -310,8 +311,6 @@
 {
 	u32 control;
 
-	BUG_ON(clk->index > 7);
-
 	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
 	if (enabled)
 		control |= SM_BIT(CEN);
@@ -325,11 +324,6 @@
 	u32 control;
 	unsigned long div = 1;
 
-	BUG_ON(clk->index > 7);
-
-	if (!clk->parent)
-		return 0;
-
 	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
 	if (control & SM_BIT(DIVEN))
 		div = 2 * (SM_BFEXT(DIV, control) + 1);
@@ -342,11 +336,6 @@
 	u32 control;
 	unsigned long parent_rate, actual_rate, div;
 
-	BUG_ON(clk->index > 7);
-
-	if (!clk->parent)
-		return 0;
-
 	parent_rate = clk->parent->get_rate(clk->parent);
 	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
 
@@ -373,11 +362,8 @@
 {
 	u32 control;
 
-	BUG_ON(clk->index > 7);
-
 	printk("clk %s: new parent %s (was %s)\n",
-	       clk->name, parent->name,
-	       clk->parent ? clk->parent->name : "(null)");
+	       clk->name, parent->name, clk->parent->name);
 
 	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
 
@@ -399,6 +385,22 @@
 	return 0;
 }
 
+static void __init genclk_init_parent(struct clk *clk)
+{
+	u32 control;
+	struct clk *parent;
+
+	BUG_ON(clk->index > 7);
+
+	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+	if (control & SM_BIT(OSCSEL))
+		parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
+	else
+		parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
+
+	clk->parent = parent;
+}
+
 /* --------------------------------------------------------------------
  *  System peripherals
  * -------------------------------------------------------------------- */
@@ -464,6 +466,17 @@
 	.users		= 1,
 };
 
+static struct resource dmaca0_resource[] = {
+	{
+		.start	= 0xff200000,
+		.end	= 0xff20ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(2),
+};
+DEFINE_DEV(dmaca, 0);
+DEV_CLK(hclk, dmaca0, hsb, 10);
+
 /* --------------------------------------------------------------------
  *  PIO
  * -------------------------------------------------------------------- */
@@ -496,19 +509,28 @@
 DEFINE_DEV(pio, 3);
 DEV_CLK(mck, pio3, pba, 13);
 
+static struct resource pio4_resource[] = {
+	PBMEM(0xffe03800),
+	IRQ(17),
+};
+DEFINE_DEV(pio, 4);
+DEV_CLK(mck, pio4, pba, 14);
+
 void __init at32_add_system_devices(void)
 {
-	system_manager.eim_first_irq = NR_INTERNAL_IRQS;
+	system_manager.eim_first_irq = EIM_IRQ_BASE;
 
 	platform_device_register(&at32_sm_device);
 	platform_device_register(&at32_intc0_device);
 	platform_device_register(&smc0_device);
 	platform_device_register(&pdc_device);
+	platform_device_register(&dmaca0_device);
 
 	platform_device_register(&pio0_device);
 	platform_device_register(&pio1_device);
 	platform_device_register(&pio2_device);
 	platform_device_register(&pio3_device);
+	platform_device_register(&pio4_device);
 }
 
 /* --------------------------------------------------------------------
@@ -521,7 +543,7 @@
 };
 static struct resource atmel_usart0_resource[] = {
 	PBMEM(0xffe00c00),
-	IRQ(7),
+	IRQ(6),
 };
 DEFINE_DEV_DATA(atmel_usart, 0);
 DEV_CLK(usart, atmel_usart0, pba, 4);
@@ -583,7 +605,7 @@
 	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
 }
 
-static struct platform_device *at32_usarts[4];
+static struct platform_device *__initdata at32_usarts[4];
 
 void __init at32_map_usart(unsigned int hw_id, unsigned int line)
 {
@@ -728,32 +750,156 @@
 /* --------------------------------------------------------------------
  *  SPI
  * -------------------------------------------------------------------- */
-static struct resource spi0_resource[] = {
+static struct resource atmel_spi0_resource[] = {
 	PBMEM(0xffe00000),
 	IRQ(3),
 };
-DEFINE_DEV(spi, 0);
-DEV_CLK(mck, spi0, pba, 0);
+DEFINE_DEV(atmel_spi, 0);
+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+
+static struct resource atmel_spi1_resource[] = {
+	PBMEM(0xffe00400),
+	IRQ(4),
+};
+DEFINE_DEV(atmel_spi, 1);
+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+
+static void __init
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+		      unsigned int n, const u8 *pins)
+{
+	unsigned int pin, mode;
+
+	for (; n; n--, b++) {
+		b->bus_num = bus_num;
+		if (b->chip_select >= 4)
+			continue;
+		pin = (unsigned)b->controller_data;
+		if (!pin) {
+			pin = pins[b->chip_select];
+			b->controller_data = (void *)pin;
+		}
+		mode = AT32_GPIOF_OUTPUT;
+		if (!(b->mode & SPI_CS_HIGH))
+			mode |= AT32_GPIOF_HIGH;
+		at32_select_gpio(pin, mode);
+	}
+}
 
-struct platform_device *__init at32_add_device_spi(unsigned int id)
+struct platform_device *__init
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 {
+	/*
+	 * Manage the chipselects as GPIOs, normally using the same pins
+	 * the SPI controller expects; but boards can use other pins.
+	 */
+	static u8 __initdata spi0_pins[] =
+		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+	static u8 __initdata spi1_pins[] =
+		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
 	struct platform_device *pdev;
 
 	switch (id) {
 	case 0:
-		pdev = &spi0_device;
+		pdev = &atmel_spi0_device;
 		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
 		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
 		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
-		select_peripheral(PA(3),  PERIPH_A, 0);	/* NPCS0 */
-		select_peripheral(PA(4),  PERIPH_A, 0);	/* NPCS1 */
-		select_peripheral(PA(5),  PERIPH_A, 0);	/* NPCS2 */
+		at32_spi_setup_slaves(0, b, n, spi0_pins);
+		break;
+
+	case 1:
+		pdev = &atmel_spi1_device;
+		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+		at32_spi_setup_slaves(1, b, n, spi1_pins);
 		break;
 
 	default:
 		return NULL;
 	}
 
+	spi_register_board_info(b, n);
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  TWI
+ * -------------------------------------------------------------------- */
+
+static struct resource atmel_twi0_resource[] = {
+	PBMEM(0xffe00800),
+	IRQ(5),
+};
+DEFINE_DEV(atmel_twi, 0);
+DEV_CLK(pclk,atmel_twi0,pba,2);
+
+struct platform_device *__init
+at32_add_device_twi(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_twi0_device;
+		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
+		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
+		break;
+
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ * MMC
+ * -------------------------------------------------------------------- */
+static struct mci_platform_data atmel_mci0_data = {
+	.detect_pin	= GPIO_PIN_NONE,
+	.wp_pin		= GPIO_PIN_NONE,
+};
+static struct resource atmel_mci0_resource[] = {
+	PBMEM(0xfff02400),
+	IRQ(28),
+};
+DEFINE_DEV_DATA(atmel_mci, 0);
+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
+
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_mci0_device;
+		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
+		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
+		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
+		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
+		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+		break;
+	default:
+		return NULL;
+	}
+
+	if (data) {
+		if (data->detect_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->detect_pin, 0);
+		if (data->wp_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->wp_pin, 0);
+		memcpy(pdev->dev.platform_data, data,
+		       sizeof(struct mci_platform_data));
+	}
+
 	platform_device_register(pdev);
 	return pdev;
 }
@@ -837,6 +983,199 @@
 	return pdev;
 }
 
+/* --------------------------------------------------------------------
+ *  USB Device Controller
+ * -------------------------------------------------------------------- */
+static struct resource usba0_resource[] = {
+	{
+		.start		= 0xff300000,
+		.end		= 0xff3fffff,
+		.flags		= IORESOURCE_MEM,
+	},
+	PBMEM(0xfff03000),
+	IRQ(31),
+};
+DEFINE_DEV(usba, 0);
+DEV_CLK(pclk, usba0, pbb, 12);
+DEV_CLK(hclk, usba0, hsb, 6);
+
+struct platform_device *__init at32_add_device_usba(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &usba0_device;
+		/* USB pads are not multiplexed */
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  AC97C
+ * -------------------------------------------------------------------- */
+static struct resource atmel_ac97c0_resource[] = {
+	PBMEM(0xfff02800),
+	IRQ(29),
+};
+DEFINE_DEV(atmel_ac97c, 0);
+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
+
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_ac97c0_device;
+		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
+		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
+		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
+		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  DAC
+ * -------------------------------------------------------------------- */
+static struct resource abdac0_resource[] = {
+	PBMEM(0xfff02000),
+	IRQ(27),
+};
+DEFINE_DEV(abdac, 0);
+DEV_CLK(pclk, abdac0, pbb, 8);
+static struct clk abdac0_sample_clk = {
+	.name           = "sample_clk",
+	.dev            = &abdac0_device.dev,
+	.mode           = genclk_mode,
+	.get_rate       = genclk_get_rate,
+	.set_rate       = genclk_set_rate,
+	.set_parent     = genclk_set_parent,
+	.index          = 6,
+};
+
+struct platform_device *__init
+at32_add_device_abdac(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &abdac0_device;
+		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
+		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
+		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
+		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  ISI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_isi0_resource[] = {
+	PBMEM(0xfff02c00),
+	IRQ(30),
+};
+DEFINE_DEV(atmel_isi, 0);
+DEV_CLK(hclk, atmel_isi0, hsb, 5);
+DEV_CLK(pclk, atmel_isi0, pbb, 11);
+
+struct platform_device *__init
+at32_add_device_isi(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_isi0_device;
+		select_peripheral(PB(0),  PERIPH_A, 0);	/* DATA0  */
+		select_peripheral(PB(1),  PERIPH_A, 0);	/* DATA1  */
+		select_peripheral(PB(2),  PERIPH_A, 0);	/* DATA2  */
+		select_peripheral(PB(3),  PERIPH_A, 0);	/* DATA3  */
+		select_peripheral(PB(4),  PERIPH_A, 0);	/* DATA4  */
+		select_peripheral(PB(5),  PERIPH_A, 0);	/* DATA5  */
+		select_peripheral(PB(6),  PERIPH_A, 0);	/* DATA6  */
+		select_peripheral(PB(7),  PERIPH_A, 0);	/* DATA7  */
+		select_peripheral(PB(11), PERIPH_B, 0);	/* DATA8  */
+		select_peripheral(PB(12), PERIPH_B, 0);	/* DATA9  */
+		select_peripheral(PB(13), PERIPH_B, 0);	/* DATA10 */
+		select_peripheral(PB(14), PERIPH_B, 0);	/* DATA11 */
+		select_peripheral(PB(8),  PERIPH_A, 0);	/* HSYNC  */
+		select_peripheral(PB(9),  PERIPH_A, 0);	/* VSYNC  */
+		select_peripheral(PB(10), PERIPH_A, 0);	/* PCLK	  */
+		break;
+
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  GCLK
+ * -------------------------------------------------------------------- */
+static struct clk gclk0 = {
+	.name		= "gclk0",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 0,
+};
+static struct clk gclk1 = {
+	.name		= "gclk1",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 1,
+};
+static struct clk gclk2 = {
+	.name		= "gclk2",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 2,
+};
+static struct clk gclk3 = {
+	.name		= "gclk3",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 3,
+};
+static struct clk gclk4 = {
+	.name		= "gclk4",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 4,
+};
+
 struct clk *at32_clock_list[] = {
 	&osc32k,
 	&osc0,
@@ -855,11 +1194,13 @@
 	&smc0_mck,
 	&pdc_hclk,
 	&pdc_pclk,
+	&dmaca0_hclk,
 	&pico_clk,
 	&pio0_mck,
 	&pio1_mck,
 	&pio2_mck,
 	&pio3_mck,
+	&pio4_mck,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
@@ -868,9 +1209,24 @@
 	&macb0_pclk,
 	&macb1_hclk,
 	&macb1_pclk,
-	&spi0_mck,
+	&atmel_spi0_spi_clk,
+	&atmel_spi1_spi_clk,
+	&atmel_twi0_pclk,
+	&atmel_mci0_mci_clk,
 	&lcdc0_hclk,
 	&lcdc0_pixclk,
+	&usba0_pclk,
+	&usba0_hclk,
+	&atmel_ac97c0_pclk,
+	&abdac0_pclk,
+	&abdac0_sample_clk,
+	&gclk0,
+	&gclk1,
+	&gclk2,
+	&gclk3,
+	&gclk4,
+	&atmel_isi0_hclk,
+	&atmel_isi0_pclk,
 };
 unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
 
@@ -880,6 +1236,7 @@
 	at32_init_pio(&pio1_device);
 	at32_init_pio(&pio2_device);
 	at32_init_pio(&pio3_device);
+	at32_init_pio(&pio4_device);
 }
 
 void __init at32_clock_init(void)
@@ -898,6 +1255,14 @@
 	if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
 		pll1.parent = &osc1;
 
+	genclk_init_parent(&gclk0);
+	genclk_init_parent(&gclk1);
+	genclk_init_parent(&gclk2);
+	genclk_init_parent(&gclk3);
+	genclk_init_parent(&gclk4);
+	genclk_init_parent(&lcdc0_pixclk);
+	genclk_init_parent(&abdac0_sample_clk);
+
 	/*
 	 * Turn on all clocks that have at least one user already, and
 	 * turn off everything else. We only do this for module
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/clock.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/clock.c
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/clock.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/clock.c	2007-03-24 16:42:28.000000000 +0100
@@ -63,7 +63,11 @@
 
 static void __clk_disable(struct clk *clk)
 {
-	BUG_ON(clk->users == 0);
+	if (clk->users == 0) {
+		printk(KERN_ERR "%s: mismatched disable\n", clk->name);
+		WARN_ON(1);
+		return;
+	}
 
 	if (--clk->users == 0 && clk->mode)
 		clk->mode(clk, 0);
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/extint.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/extint.c
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/extint.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/extint.c	2007-03-24 16:42:28.000000000 +0100
@@ -55,20 +55,11 @@
 	unsigned long flags;
 	int ret = 0;
 
+	flow_type &= IRQ_TYPE_SENSE_MASK;
 	if (flow_type == IRQ_TYPE_NONE)
 		flow_type = IRQ_TYPE_LEVEL_LOW;
 
 	desc = &irq_desc[irq];
-	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
-	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
-
-	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
-		desc->status |= IRQ_LEVEL;
-		set_irq_handler(irq, handle_level_irq);
-	} else {
-		set_irq_handler(irq, handle_edge_irq);
-	}
-
 	spin_lock_irqsave(&sm->lock, flags);
 
 	mode = sm_readl(sm, EIM_MODE);
@@ -97,9 +88,16 @@
 		break;
 	}
 
-	sm_writel(sm, EIM_MODE, mode);
-	sm_writel(sm, EIM_EDGE, edge);
-	sm_writel(sm, EIM_LEVEL, level);
+	if (ret == 0) {
+		sm_writel(sm, EIM_MODE, mode);
+		sm_writel(sm, EIM_EDGE, edge);
+		sm_writel(sm, EIM_LEVEL, level);
+
+		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+			flow_type |= IRQ_LEVEL;
+		desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+		desc->status |= flow_type;
+	}
 
 	spin_unlock_irqrestore(&sm->lock, flags);
 
@@ -122,8 +120,6 @@
 	unsigned long status, pending;
 	unsigned int i, ext_irq;
 
-	spin_lock(&sm->lock);
-
 	status = sm_readl(sm, EIM_ISR);
 	pending = status & sm_readl(sm, EIM_IMR);
 
@@ -133,10 +129,11 @@
 
 		ext_irq = i + sm->eim_first_irq;
 		ext_desc = irq_desc + ext_irq;
-		ext_desc->handle_irq(ext_irq, ext_desc);
+		if (ext_desc->status & IRQ_LEVEL)
+			handle_level_irq(ext_irq, ext_desc);
+		else
+			handle_edge_irq(ext_irq, ext_desc);
 	}
-
-	spin_unlock(&sm->lock);
 }
 
 static int __init eim_init(void)
@@ -168,8 +165,9 @@
 	sm->eim_chip = &eim_chip;
 
 	for (i = 0; i < nr_irqs; i++) {
+		/* NOTE the handler we set here is ignored by the demux */
 		set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
-					 handle_edge_irq);
+					 handle_level_irq);
 		set_irq_chip_data(sm->eim_first_irq + i, sm);
 	}
 
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/hsmc.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/hsmc.c
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/hsmc.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/hsmc.c	2007-03-24 16:42:29.000000000 +0100
@@ -75,12 +75,35 @@
 		return -EINVAL;
 	}
 
+	switch (config->nwait_mode) {
+	case 0:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
+		break;
+	case 1:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
+		break;
+	case 2:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
+		break;
+	case 3:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (config->tdf_cycles) {
+		mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
+	}
+
 	if (config->nrd_controlled)
 		mode |= HSMC_BIT(READ_MODE);
 	if (config->nwe_controlled)
 		mode |= HSMC_BIT(WRITE_MODE);
 	if (config->byte_write)
 		mode |= HSMC_BIT(BAT);
+	if (config->tdf_mode)
+		mode |= HSMC_BIT(TDF_MODE);
 
 	pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
 		 cs, setup, pulse, cycle, mode);
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Kconfig linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Kconfig
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,15 @@
+if PLATFORM_AT32AP
+
+menu "Atmel AVR32 AP options"
+
+config PIO_DEV
+	bool "PIO /dev interface"
+	select CONFIGFS_FS
+	default y
+	help
+	  Say `Y' to enable a /dev interface to the Parallel I/O
+	  Controller.
+
+endmenu
+
+endif
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Makefile linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Makefile
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Makefile	2007-03-24 16:42:28.000000000 +0100
@@ -1,2 +1,2 @@
-obj-y				+= at32ap.o clock.o pio.o intc.o extint.o hsmc.o
+obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
 obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/pio.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/pio.c
--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/pio.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/pio.c	2007-03-24 16:42:29.000000000 +0100
@@ -12,7 +12,9 @@
 #include <linux/debugfs.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
 
+#include <asm/gpio.h>
 #include <asm/io.h>
 
 #include <asm/arch/portmux.h>
@@ -23,10 +25,11 @@
 
 struct pio_device {
 	void __iomem *regs;
-	const struct platform_device *pdev;
+	struct platform_device *pdev;
 	struct clk *clk;
 	u32 pinmux_mask;
-	char name[32];
+	u32 gpio_mask;
+	char name[8];
 };
 
 static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
@@ -76,6 +79,9 @@
 	if (!(flags & AT32_GPIOF_PULLUP))
 		pio_writel(pio, PUDR, mask);
 
+	/* gpio_request NOT allowed */
+	set_bit(pin_index, &pio->gpio_mask);
+
 	return;
 
 fail:
@@ -99,19 +105,52 @@
 		goto fail;
 	}
 
-	pio_writel(pio, PUER, mask);
-	if (flags & AT32_GPIOF_HIGH)
-		pio_writel(pio, SODR, mask);
-	else
-		pio_writel(pio, CODR, mask);
-	if (flags & AT32_GPIOF_OUTPUT)
+	if (flags & AT32_GPIOF_OUTPUT) {
+		if (flags & AT32_GPIOF_HIGH)
+			pio_writel(pio, SODR, mask);
+		else
+			pio_writel(pio, CODR, mask);
+		pio_writel(pio, PUDR, mask);
 		pio_writel(pio, OER, mask);
-	else
+	} else {
+		if (flags & AT32_GPIOF_PULLUP)
+			pio_writel(pio, PUER, mask);
+		else
+			pio_writel(pio, PUDR, mask);
+		if (flags & AT32_GPIOF_DEGLITCH)
+			pio_writel(pio, IFER, mask);
+		else
+			pio_writel(pio, IFDR, mask);
 		pio_writel(pio, ODR, mask);
+	}
 
 	pio_writel(pio, PER, mask);
-	if (!(flags & AT32_GPIOF_PULLUP))
-		pio_writel(pio, PUDR, mask);
+
+	/* gpio_request now allowed */
+	clear_bit(pin_index, &pio->gpio_mask);
+
+	return;
+
+fail:
+	dump_stack();
+}
+
+/* Reserve a pin, preventing anyone else from changing its configuration. */
+void __init at32_reserve_pin(unsigned int pin)
+{
+	struct pio_device *pio;
+	unsigned int pin_index = pin & 0x1f;
+
+	pio = gpio_to_pio(pin);
+	if (unlikely(!pio)) {
+		printk("pio: invalid pin %u\n", pin);
+		goto fail;
+	}
+
+	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+		printk("%s: pin %u is busy\n", pio->name, pin_index);
+		goto fail;
+	}
 
 	return;
 
@@ -119,20 +158,793 @@
 	dump_stack();
 }
 
+/*--------------------------------------------------------------------------*/
+
+static unsigned int pio_id(struct pio_device *pio)
+{
+	return pio - pio_dev;
+}
+
+static void __disable_gpio(struct pio_device *pio, u32 mask)
+{
+	pio_writel(pio, PUER, mask);
+	pio_writel(pio, ODR, mask);
+}
+
+static void pio_dealloc_mask(struct pio_device *pio, u32 mask)
+{
+	u32 old, new;
+
+	do {
+		old = pio->pinmux_mask;
+		new = old & ~mask;
+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+}
+
+/* GPIO API */
+
+int gpio_request(unsigned int gpio, const char *label)
+{
+	struct pio_device *pio;
+	unsigned int pin;
+
+	pio = gpio_to_pio(gpio);
+	if (!pio)
+		return -ENODEV;
+
+	pin = gpio & 0x1f;
+	if (test_and_set_bit(pin, &pio->gpio_mask))
+		return -EBUSY;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned int gpio)
+{
+	struct pio_device *pio;
+	unsigned int pin;
+
+	pio = gpio_to_pio(gpio);
+	if (!pio) {
+		printk(KERN_ERR
+		       "gpio: attempted to free invalid pin %u\n", gpio);
+		return;
+	}
+
+	pin = gpio & 0x1f;
+	if (!test_and_clear_bit(pin, &pio->gpio_mask))
+		printk(KERN_ERR "gpio: freeing free or non-gpio pin %s-%u\n",
+		       pio->name, pin);
+}
+EXPORT_SYMBOL(gpio_free);
+
+int gpio_direction_input(unsigned int gpio)
+{
+	struct pio_device *pio;
+	unsigned int pin;
+
+	pio = gpio_to_pio(gpio);
+	if (!pio)
+		return -ENODEV;
+
+	pin = gpio & 0x1f;
+	pio_writel(pio, ODR, 1 << pin);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned int gpio)
+{
+	struct pio_device *pio;
+	unsigned int pin;
+
+	pio = gpio_to_pio(gpio);
+	if (!pio)
+		return -ENODEV;
+
+	pin = gpio & 0x1f;
+	pio_writel(pio, OER, 1 << pin);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned int gpio)
+{
+	struct pio_device *pio = &pio_dev[gpio >> 5];
+
+	return (pio_readl(pio, PDSR) >> (gpio & 0x1f)) & 1;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned int gpio, int value)
+{
+	struct pio_device *pio = &pio_dev[gpio >> 5];
+	u32 mask;
+
+	mask = 1 << (gpio & 0x1f);
+	if (value)
+		pio_writel(pio, SODR, mask);
+	else
+		pio_writel(pio, CODR, mask);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+/*--------------------------------------------------------------------------*/
+
+/* GPIO IRQ support */
+
+static void gpio_irq_mask(unsigned irq)
+{
+	unsigned		gpio = irq_to_gpio(irq);
+	struct pio_device	*pio = &pio_dev[gpio >> 5];
+
+	pio_writel(pio, IDR, 1 << (gpio & 0x1f));
+}
+
+static void gpio_irq_unmask(unsigned irq)
+{
+	unsigned		gpio = irq_to_gpio(irq);
+	struct pio_device	*pio = &pio_dev[gpio >> 5];
+
+	pio_writel(pio, IER, 1 << (gpio & 0x1f));
+}
+
+static int gpio_irq_type(unsigned irq, unsigned type)
+{
+	if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "gpio",
+	.mask		= gpio_irq_mask,
+	.unmask		= gpio_irq_unmask,
+	.set_type	= gpio_irq_type,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct pio_device	*pio = get_irq_chip_data(irq);
+	unsigned		gpio_irq;
+
+	gpio_irq = (unsigned) get_irq_data(irq);
+	for (;;) {
+		u32		isr;
+		struct irq_desc	*d;
+
+		/* ack pending GPIO interrupts */
+		isr = pio_readl(pio, ISR) & pio_readl(pio, IMR);
+		if (!isr)
+			break;
+		do {
+			int i;
+
+			i = ffs(isr) - 1;
+			isr &= ~(1 << i);
+
+			i += gpio_irq;
+			d = &irq_desc[i];
+
+			d->handle_irq(i, d);
+		} while (isr);
+	}
+}
+
+static void __init
+gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq)
+{
+	unsigned	i;
+
+	set_irq_chip_data(irq, pio);
+	set_irq_data(irq, (void *) gpio_irq);
+
+	for (i = 0; i < 32; i++, gpio_irq++) {
+		set_irq_chip_data(gpio_irq, pio);
+		set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
+				handle_simple_irq);
+	}
+
+	set_irq_chained_handler(irq, gpio_irq_handler);
+}
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PIO_DEV
+#include <linux/configfs.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+
+#define GPIO_DEV_MAX			8
+
+static struct class *gpio_dev_class;
+static dev_t gpio_devt;
+
+struct gpio_item {
+	spinlock_t lock;
+
+	struct pio_device *pio;
+
+	int enabled;
+	int pio_id;
+	u32 pin_mask;
+	u32 oe_mask;
+
+	/* Pin state last time we read it (for blocking reads) */
+	u32 pin_state;
+	int changed;
+
+	wait_queue_head_t change_wq;
+	struct fasync_struct *async_queue;
+
+	int id;
+	struct class_device *gpio_dev;
+	struct cdev char_dev;
+	struct config_item item;
+};
+
+struct gpio_attribute {
+	struct configfs_attribute attr;
+	ssize_t (*show)(struct gpio_item *, char *);
+	ssize_t (*store)(struct gpio_item *, const char *, size_t);
+};
+
+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
+{
+	struct gpio_item *gpio = dev_id;
+	u32 old_state, new_state;
+
+	old_state = gpio->pin_state;
+	new_state = pio_readl(gpio->pio, PDSR);
+	gpio->pin_state = new_state;
+
+	if (new_state != old_state) {
+		gpio->changed = 1;
+		wake_up_interruptible(&gpio->change_wq);
+
+		if (gpio->async_queue)
+			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int gpio_dev_open(struct inode *inode, struct file *file)
+{
+	struct gpio_item *gpio = container_of(inode->i_cdev,
+					      struct gpio_item,
+					      char_dev);
+	unsigned int irq;
+	unsigned int i;
+	int ret;
+
+	nonseekable_open(inode, file);
+	config_item_get(&gpio->item);
+	file->private_data = gpio;
+
+	gpio->pin_state = pio_readl(gpio->pio, PDSR) & gpio->pin_mask;
+	gpio->changed = 1;
+
+	for (i = 0; i < 32; i++) {
+		if (gpio->pin_mask & (1 << i)) {
+			irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
+			ret = request_irq(irq, gpio_dev_interrupt, 0,
+					  "gpio-dev", gpio);
+			if (ret)
+				goto err_irq;
+		}
+	}
+
+	return 0;
+
+err_irq:
+	while (i--) {
+		if (gpio->pin_mask & (1 << i)) {
+			irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
+			free_irq(irq, gpio);
+		}
+	}
+
+	config_item_put(&gpio->item);
+
+	return ret;
+}
+
+static int gpio_dev_fasync(int fd, struct file *file, int mode)
+{
+	struct gpio_item *gpio = file->private_data;
+
+	return fasync_helper(fd, file, mode, &gpio->async_queue);
+}
+
+static int gpio_dev_release(struct inode *inode, struct file *file)
+{
+	struct gpio_item *gpio = file->private_data;
+	unsigned int irq;
+	unsigned int i;
+
+	gpio_dev_fasync(-1, file, 0);
+
+	for (i = 0; i < 32; i++) {
+		if (gpio->pin_mask & (1 << i)) {
+			irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
+			free_irq(irq, gpio);
+		}
+	}
+
+	config_item_put(&gpio->item);
+
+	return 0;
+}
+
+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
+{
+	struct gpio_item *gpio = file->private_data;
+	unsigned int mask = 0;
+
+	poll_wait(file, &gpio->change_wq, wait);
+	if (gpio->changed)
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
+}
+
+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
+			     size_t count, loff_t *offset)
+{
+	struct gpio_item *gpio = file->private_data;
+	u32 value;
+
+	spin_lock_irq(&gpio->lock);
+	while (!gpio->changed) {
+		spin_unlock_irq(&gpio->lock);
+
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
+			return -ERESTARTSYS;
+
+		spin_lock_irq(&gpio->lock);
+	}
+
+	gpio->changed = 0;
+	value = pio_readl(gpio->pio, PDSR) & gpio->pin_mask;
+
+	spin_unlock_irq(&gpio->lock);
+
+	count = min(count, (size_t)4);
+	if (copy_to_user(buf, &value, count))
+		return -EFAULT;
+
+	return count;
+}
+
+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
+			      size_t count, loff_t *offset)
+{
+	struct gpio_item *gpio = file->private_data;
+	u32 value = 0;
+	u32 mask = ~0UL;
+
+	count = min(count, (size_t)4);
+	if (copy_from_user(&value, buf, count))
+		return -EFAULT;
+
+	/* Assuming big endian */
+	mask <<= (4 - count) * 8;
+	mask &= gpio->pin_mask;
+
+	pio_writel(gpio->pio, CODR, ~value & mask);
+	pio_writel(gpio->pio, SODR, value & mask);
+
+	return count;
+}
+
+static struct file_operations gpio_dev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= gpio_dev_open,
+	.release	= gpio_dev_release,
+	.fasync		= gpio_dev_fasync,
+	.poll		= gpio_dev_poll,
+	.read		= gpio_dev_read,
+	.write		= gpio_dev_write,
+};
+
+static struct gpio_item *to_gpio_item(struct config_item *item)
+{
+	return item ? container_of(item, struct gpio_item, item) : NULL;
+}
+
+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "%d\n", gpio->pio_id);
+}
+
+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
+				  const char *page, size_t count)
+{
+	unsigned long id;
+	char *p = (char *)page;
+	ssize_t ret = -EINVAL;
+
+	id = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	/* Switching PIO is not allowed when live... */
+	spin_lock(&gpio->lock);
+	if (!gpio->enabled) {
+		ret = -ENXIO;
+		if ((id < MAX_NR_PIO_DEVICES) && pio_dev[id].regs) {
+			gpio->pio_id = id;
+			ret = count;
+		}
+	}
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "0x%08x\n", gpio->pin_mask);
+}
+
+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
+				   const char *page, size_t count)
+{
+	u32 new_mask;
+	char *p = (char *)page;
+	ssize_t ret = -EINVAL;
+
+	new_mask = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	/* Can't update the pin mask while live. */
+	spin_lock(&gpio->lock);
+	if (!gpio->enabled) {
+		gpio->oe_mask &= new_mask;
+		gpio->pin_mask = new_mask;
+		ret = count;
+	}
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "0x%08x\n", gpio->oe_mask);
+}
+
+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
+				  const char *page, size_t count)
+{
+	u32 mask;
+	char *p = (char *)page;
+	ssize_t ret = -EINVAL;
+
+	mask = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	spin_lock(&gpio->lock);
+	if (!gpio->enabled) {
+		gpio->oe_mask = mask & gpio->pin_mask;
+		ret = count;
+	}
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "%d\n", gpio->enabled);
+}
+
+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
+				  const char *page, size_t count)
+{
+	struct pio_device *pio;
+	u32 old, new;
+	char *p = (char *)page;
+	int enabled;
+	int ret;
+
+	enabled = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	/* make it a boolean value */
+	enabled = !!enabled;
+
+	if (gpio->enabled == enabled)
+		/* Already enabled; do nothing. */
+		return count;
+
+	BUG_ON(gpio->id >= GPIO_DEV_MAX);
+
+	if (!enabled) {
+		class_device_unregister(gpio->gpio_dev);
+		cdev_del(&gpio->char_dev);
+		__disable_gpio(gpio->pio, gpio->pin_mask);
+		pio_dealloc_mask(gpio->pio, gpio->pin_mask);
+		gpio->pio = NULL;
+	} else {
+		if (gpio->pio_id < 0 || !gpio->pin_mask)
+			return -ENODEV;
+	}
+
+	/* Disallow any updates to gpio_id or pin_mask */
+	spin_lock(&gpio->lock);
+	gpio->enabled = enabled;
+	spin_unlock(&gpio->lock);
+
+	if (!enabled)
+		return count;
+
+	/* Now, try to allocate the pins */
+	ret = -EBUSY;
+	pio = gpio->pio = &pio_dev[gpio->pio_id];
+	do {
+		old = pio->pinmux_mask;
+		if (old & gpio->pin_mask)
+			goto err_alloc_pins;
+
+		new = old | gpio->pin_mask;
+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+
+	pio_writel(pio, OER, gpio->oe_mask);
+	pio_writel(pio, PER, gpio->pin_mask);
+
+	cdev_init(&gpio->char_dev, &gpio_dev_fops);
+	gpio->char_dev.owner = THIS_MODULE;
+	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
+	if (ret < 0)
+		goto err_cdev_add;
+	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
+					     MKDEV(MAJOR(gpio_devt), gpio->id),
+					     &gpio->pio->pdev->dev,
+					     "gpio%d", gpio->id);
+	if (IS_ERR(gpio->gpio_dev)) {
+		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
+		ret = PTR_ERR(gpio->gpio_dev);
+		goto err_class_dev;
+	}
+
+	printk(KERN_INFO "created gpio%d (pio%d/0x%08x) as (%d:%d)\n",
+	       gpio->id, pio_id(gpio->pio), gpio->pin_mask,
+	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
+
+	return 0;
+
+err_class_dev:
+	cdev_del(&gpio->char_dev);
+err_cdev_add:
+	__disable_gpio(pio, gpio->pin_mask);
+	pio_dealloc_mask(pio, gpio->pin_mask);
+err_alloc_pins:
+	spin_lock(&gpio->lock);
+	gpio->enabled = 0;
+	spin_unlock(&gpio->lock);
+	gpio->pio = NULL;
+
+	return ret;
+}
+
+static struct gpio_attribute gpio_item_attr_gpio_id = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "gpio_id",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_gpio_id,
+	.store = gpio_store_gpio_id,
+};
+static struct gpio_attribute gpio_item_attr_pin_mask = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "pin_mask",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_pin_mask,
+	.store = gpio_store_pin_mask,
+};
+static struct gpio_attribute gpio_item_attr_oe_mask = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "oe_mask",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_oe_mask,
+	.store = gpio_store_oe_mask,
+};
+static struct gpio_attribute gpio_item_attr_enabled = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "enabled",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_enabled,
+	.store = gpio_store_enabled,
+};
+
+static struct configfs_attribute *gpio_item_attrs[] = {
+	&gpio_item_attr_gpio_id.attr,
+	&gpio_item_attr_pin_mask.attr,
+	&gpio_item_attr_oe_mask.attr,
+	&gpio_item_attr_enabled.attr,
+	NULL,
+};
+
+static ssize_t gpio_show_attr(struct config_item *item,
+			      struct configfs_attribute *attr,
+			      char *page)
+{
+	struct gpio_item *gpio_item = to_gpio_item(item);
+	struct gpio_attribute *gpio_attr
+		= container_of(attr, struct gpio_attribute, attr);
+	ssize_t ret = 0;
+
+	if (gpio_attr->show)
+		ret = gpio_attr->show(gpio_item, page);
+	return ret;
+}
+
+static ssize_t gpio_store_attr(struct config_item *item,
+			       struct configfs_attribute *attr,
+			       const char *page, size_t count)
+{
+	struct gpio_item *gpio_item = to_gpio_item(item);
+	struct gpio_attribute *gpio_attr
+		= container_of(attr, struct gpio_attribute, attr);
+	ssize_t ret = -EINVAL;
+
+	if (gpio_attr->store)
+		ret = gpio_attr->store(gpio_item, page, count);
+	return ret;
+}
+
+static void gpio_release(struct config_item *item)
+{
+	kfree(to_gpio_item(item));
+}
+
+static struct configfs_item_operations gpio_item_ops = {
+	.release		= gpio_release,
+	.show_attribute		= gpio_show_attr,
+	.store_attribute	= gpio_store_attr,
+};
+
+static struct config_item_type gpio_item_type = {
+	.ct_item_ops	= &gpio_item_ops,
+	.ct_attrs	= gpio_item_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item *gpio_make_item(struct config_group *group,
+					  const char *name)
+{
+	static int next_id;
+	struct gpio_item *gpio;
+
+	if (next_id >= GPIO_DEV_MAX)
+		return NULL;
+
+	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
+	if (!gpio)
+		return NULL;
+
+	gpio->id = next_id++;
+	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
+	spin_lock_init(&gpio->lock);
+	init_waitqueue_head(&gpio->change_wq);
+
+	return &gpio->item;
+}
+
+static void gpio_drop_item(struct config_group *group,
+			   struct config_item *item)
+{
+	struct gpio_item *gpio = to_gpio_item(item);
+	struct pio_device *pio;
+
+	spin_lock(&gpio->lock);
+	if (gpio->enabled) {
+		class_device_unregister(gpio->gpio_dev);
+		cdev_del(&gpio->char_dev);
+	}
+
+	pio = gpio->pio;
+	if (pio) {
+		__disable_gpio(pio, gpio->pin_mask);
+		pio_dealloc_mask(pio, gpio->pin_mask);
+		gpio->pio = NULL;
+	}
+	spin_unlock(&gpio->lock);
+}
+
+static struct configfs_group_operations gpio_group_ops = {
+	.make_item	= gpio_make_item,
+	.drop_item	= gpio_drop_item,
+};
+
+static struct config_item_type gpio_group_type = {
+	.ct_group_ops	= &gpio_group_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem gpio_subsys = {
+	.su_group = {
+		.cg_item = {
+			 .ci_namebuf = "gpio",
+			 .ci_type = &gpio_group_type,
+		 },
+	},
+};
+
+static int __init pio_init_dev(void)
+{
+	int err;
+
+	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
+	if (IS_ERR(gpio_dev_class)) {
+		err = PTR_ERR(gpio_dev_class);
+		goto err_class_create;
+	}
+
+	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
+	if (err < 0)
+		goto err_alloc_chrdev;
+
+	/* Configfs initialization */
+	config_group_init(&gpio_subsys.su_group);
+	init_MUTEX(&gpio_subsys.su_sem);
+	err = configfs_register_subsystem(&gpio_subsys);
+	if (err)
+		goto err_register_subsys;
+
+	return 0;
+
+err_register_subsys:
+	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
+err_alloc_chrdev:
+	class_destroy(gpio_dev_class);
+err_class_create:
+	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
+	return err;
+}
+late_initcall(pio_init_dev);
+#endif /* CONFIG_PIO_DEV */
+
 static int __init pio_probe(struct platform_device *pdev)
 {
 	struct pio_device *pio = NULL;
+	int irq = platform_get_irq(pdev, 0);
+	int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32;
 
 	BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES);
 	pio = &pio_dev[pdev->id];
 	BUG_ON(!pio->regs);
 
-	/* TODO: Interrupts */
+	gpio_irq_setup(pio, irq, gpio_irq_base);
 
 	platform_set_drvdata(pdev, pio);
 
-	printk(KERN_INFO "%s: Atmel Port Multiplexer at 0x%p (irq %d)\n",
-	       pio->name, pio->regs, platform_get_irq(pdev, 0));
+	printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n",
+	       pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31);
 
 	return 0;
 }
@@ -148,7 +960,7 @@
 {
 	return platform_driver_register(&pio_driver);
 }
-subsys_initcall(pio_init);
+postcore_initcall(pio_init);
 
 void __init at32_init_pio(struct platform_device *pdev)
 {
@@ -184,6 +996,13 @@
 	pio->pdev = pdev;
 	pio->regs = ioremap(regs->start, regs->end - regs->start + 1);
 
-	pio_writel(pio, ODR, ~0UL);
-	pio_writel(pio, PER, ~0UL);
+	/*
+	 * request_gpio() is only valid for pins that have been
+	 * explicitly configured as GPIO and not previously requested
+	 */
+	pio->gpio_mask = ~0UL;
+
+	/* start with irqs disabled and acked */
+	pio_writel(pio, IDR, ~0UL);
+	(void) pio_readl(pio, ISR);
 }
diff -urN linux-2.6.20.4-0rig/arch/avr32/Makefile linux-2.6.20.4-atmel/arch/avr32/Makefile
--- linux-2.6.20.4-0rig/arch/avr32/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -30,6 +30,8 @@
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
 core-y					+= arch/avr32/kernel/
 core-y					+= arch/avr32/mm/
+drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
+drivers-y				+= arch/avr32/drivers/
 libs-y					+= arch/avr32/lib/
 
 archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
diff -urN linux-2.6.20.4-0rig/arch/avr32/mm/cache.c linux-2.6.20.4-atmel/arch/avr32/mm/cache.c
--- linux-2.6.20.4-0rig/arch/avr32/mm/cache.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mm/cache.c	2007-03-24 16:42:28.000000000 +0100
@@ -22,18 +22,34 @@
 
 void invalidate_dcache_region(void *start, size_t size)
 {
-	unsigned long v, begin, end, linesz;
+	unsigned long v, begin, end, linesz, mask;
+	int flush = 0;
 
 	linesz = boot_cpu_data.dcache.linesz;
+	mask = linesz - 1;
 
-	//printk("invalidate dcache: %p + %u\n", start, size);
-
-	/* You asked for it, you got it */
-	begin = (unsigned long)start & ~(linesz - 1);
-	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+	/* when first and/or last cachelines are shared, flush them
+	 * instead of invalidating ... never discard valid data!
+	 */
+	begin = (unsigned long)start;
+	end = begin + size - 1;
+
+	if (begin & mask) {
+		flush_dcache_line(start);
+		begin += linesz;
+		flush = 1;
+	}
+	if ((end & mask) != mask) {
+		flush_dcache_line((void *)end);
+		end -= linesz;
+		flush = 1;
+	}
 
-	for (v = begin; v < end; v += linesz)
+	/* remaining cachelines only need invalidation */
+	for (v = begin; v <= end; v += linesz)
 		invalidate_dcache_line((void *)v);
+	if (flush)
+		flush_write_buffer();
 }
 
 void clean_dcache_region(void *start, size_t size)
diff -urN linux-2.6.20.4-0rig/arch/avr32/mm/dma-coherent.c linux-2.6.20.4-atmel/arch/avr32/mm/dma-coherent.c
--- linux-2.6.20.4-0rig/arch/avr32/mm/dma-coherent.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/mm/dma-coherent.c	2007-03-24 16:42:29.000000000 +0100
@@ -41,6 +41,13 @@
 	struct page *page, *free, *end;
 	int order;
 
+	/* Following is a work-around (a.k.a. hack) to prevent pages
+	 * with __GFP_COMP being passed to split_page() which cannot
+	 * handle them.  The real problem is that this flag probably
+	 * should be 0 on AVR32 as it is not supported on this
+	 * platform--see CONFIG_HUGETLB_PAGE. */
+	gfp &= ~(__GFP_COMP);
+
 	size = PAGE_ALIGN(size);
 	order = get_order(size);
 
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/common.c linux-2.6.20.4-atmel/arch/avr32/oprofile/common.c
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/common.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/common.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Ronny Pedersen
+ */
+
+#define DEBUG
+#include <linux/init.h>
+#include <linux/oprofile.h>
+#include <linux/errno.h>
+#include <asm/semaphore.h>
+#include <linux/sysdev.h>
+
+#include "op_avr32_model.h"
+#include "op_counter.h"
+
+static struct op_avr32_model_spec *pc_model;
+static int pc_enabled = 0;
+static struct semaphore pc_sem;
+
+
+static int pc_start(void);
+static int pc_setup(void);
+static void pc_stop(void);
+static int pc_create_files(struct super_block *, struct dentry *);
+
+
+struct op_counter_config counter_config[OP_MAX_COUNTER];
+
+static int pc_suspend(struct sys_device *dev, u32 state)
+{
+	if (pc_enabled)
+		pc_stop();
+	return 0;
+}
+
+static int pc_resume(struct sys_device *dev)
+{
+	if (pc_enabled)
+		pc_start();
+	return 0;
+}
+
+static struct sysdev_class oprofile_sysclass = {
+	set_kset_name("oprofile"),
+	.resume		= pc_resume,
+	.suspend	= pc_suspend,
+};
+
+static struct sys_device device_oprofile = {
+	.id		= 0,
+	.cls		= &oprofile_sysclass,
+};
+
+static int __init init_driverfs(void)
+{
+	int ret;
+
+	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
+		ret = sysdev_register(&device_oprofile);
+
+	return ret;
+}
+
+static void  exit_driverfs(void)
+{
+	sysdev_unregister(&device_oprofile);
+	sysdev_class_unregister(&oprofile_sysclass);
+}
+
+static int pc_create_files(struct super_block *sb, struct dentry *root)
+{
+	unsigned int i;
+
+	pr_debug("AVR32 Peformance Counters: create files\n");
+	for (i = 0; i < pc_model->num_counters; i++) {
+		struct dentry *dir;
+		char buf[2];
+
+		snprintf(buf, sizeof buf, "%d", i);
+		dir = oprofilefs_mkdir(sb, root, buf);
+		oprofilefs_create_ulong(sb, dir, "enabled",
+					&counter_config[i].enabled);
+		oprofilefs_create_ulong(sb, dir, "event",
+					&counter_config[i].event);
+		oprofilefs_create_ulong(sb, dir, "count",
+					&counter_config[i].count);
+		oprofilefs_create_ulong(sb, dir, "unit_mask",
+					&counter_config[i].unit_mask);
+		oprofilefs_create_ulong(sb, dir, "kernel",
+					&counter_config[i].kernel);
+		oprofilefs_create_ulong(sb, dir, "user",
+					&counter_config[i].user);
+	}
+
+	return 0;
+}
+
+static int pc_setup(void)
+{
+	int ret;
+
+	spin_lock(&oprofilefs_lock);
+	pr_debug("AVR32 Peformance Counters: setup\n");
+	ret = pc_model->setup_ctrs();
+	spin_unlock(&oprofilefs_lock);
+	return ret;
+}
+
+static int pc_start(void)
+{
+	int ret = -EBUSY;
+
+	down(&pc_sem);
+	if (!pc_enabled) {
+		pr_debug("AVR32 Peformance Counters: start\n");
+		ret = pc_model->start();
+		pc_enabled = !ret;
+	}
+	up(&pc_sem);
+	return ret;
+}
+
+static void pc_stop(void)
+{
+	down(&pc_sem);
+	pr_debug("AVR32 Peformance Counters: stop\n");
+	if (pc_enabled)
+		pc_model->stop();
+	pc_enabled = 0;
+	up(&pc_sem);
+}
+
+int __init pc_init(struct oprofile_operations *ops,
+		   struct op_avr32_model_spec *spec)
+{
+	init_MUTEX(&pc_sem);
+
+	if ( spec->init )
+		if (spec->init() < 0)
+			return -ENODEV;
+
+	pc_model = spec;
+	init_driverfs();
+	ops->create_files = pc_create_files;
+	ops->setup = pc_setup;
+	ops->shutdown = pc_stop;
+	ops->start = pc_start;
+	ops->stop = pc_stop;
+	ops->cpu_type = pc_model->name;
+	printk(KERN_INFO "oprofile: using %s Performance Counters\n",
+	       spec->name);
+	pr_debug("AVR32 Peformance Counters: pc_init\n");
+
+	return 0;
+}
+
+void pc_exit(void)
+{
+	if (pc_model) {
+		pr_debug("AVR32 Peformance Counters: exit\n");
+		exit_driverfs();
+		pc_model = NULL;
+	}
+}
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/init.c linux-2.6.20.4-atmel/arch/avr32/oprofile/init.c
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/init.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/init.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Ronny Pedersen
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include "op_avr32_model.h"
+#include "op_model_avr32.h"
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	int ret = -ENODEV;
+
+	ret = pc_init(ops, &op_avr32_spec);
+
+	return ret;
+}
+
+void oprofile_arch_exit(void)
+{
+	pc_exit();
+}
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/Kconfig linux-2.6.20.4-atmel/arch/avr32/oprofile/Kconfig
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+	depends on EXPERIMENTAL
+
+config PROFILING
+	bool "Profiling support (EXPERIMENTAL)"
+	help
+	  Say Y here to enable the extended profiling support mechanisms used
+	  by profilers such as OProfile.
+
+
+config OPROFILE
+	tristate "OProfile system profiling (EXPERIMENTAL)"
+	depends on PROFILING
+	help
+	  OProfile is a profiling system capable of profiling the
+	  whole system, including the kernel, kernel modules, libraries,
+	  and applications.
+
+	  If unsure, say N.
+
+endmenu
+
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/Makefile linux-2.6.20.4-atmel/arch/avr32/oprofile/Makefile
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,10 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+		oprof.o cpu_buffer.o buffer_sync.o \
+		event_buffer.o oprofile_files.o \
+		oprofilefs.o oprofile_stats.o \
+		timer_int.o )
+
+oprofile-y				:= $(DRIVER_OBJS) init.o common.o
+oprofile-y				+= op_model_avr32.o
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_avr32_model.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_avr32_model.h
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_avr32_model.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_avr32_model.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,25 @@
+/*
+ * interface to AVR32 machine specific operations
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Ronny Pedersen
+ */
+
+#ifndef OP_AVR32_MODEL_H
+#define OP_AVR32_MODEL_H
+
+struct op_avr32_model_spec {
+	int (*init)(void);
+	unsigned int num_counters;
+	int (*setup_ctrs)(void);
+	int (*start)(void);
+	void (*stop)(void);
+	char *name;
+};
+
+#endif /* OP_AVR32_MODEL_H */
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_counter.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_counter.h
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_counter.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_counter.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Ronny Pedersen
+ */
+#ifndef OP_COUNTER_H
+#define OP_COUNTER_H
+
+#define OP_MAX_COUNTER 3
+
+/* Per performance monitor configuration as set via
+ * oprofilefs.
+ */
+struct op_counter_config {
+	unsigned long count;
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long unit_mask;
+	unsigned long kernel;
+	unsigned long user;
+};
+
+extern struct op_counter_config counter_config[];
+
+#endif /* OP_COUNTER_H */
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.c linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.c
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,222 @@
+/*
+ * AVR32 Performance Counter Driver
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Authors: Sondre Garsjoe, Ronny Pedersen
+ */
+
+#define DEBUG
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <asm/intc.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/sysreg.h>
+
+#include "op_counter.h"
+#include "op_avr32_model.h"
+
+
+#define	PC_ENABLE	0x001	/* Enable counters */
+#define PCNT_RESET	0x002	/* Reset event counters */
+#define	CCNT_RESET	0x004	/* Reset clock counter */
+#define	PC_RESET	(CCNT_RESET | PCNT_RESET)
+#define PC_CNT64	0x008	/* Make CCNT count every 64th cycle */
+
+
+#define EVT_UNUSED			0xFF
+
+struct pc_counter {
+	volatile unsigned long ovf;
+	unsigned long reset_counter;
+};
+
+enum { PCCNT, PCNT0, PCNT1, MAX_COUNTERS };
+
+#define PCCNT_IE  (1 << 4)
+#define PCNT0_IE  (1 << 5)
+#define PCNT1_IE  (1 << 6)
+
+#define PCCNT_F  (1 << 8)
+#define PCNT0_F  (1 << 9)
+#define PCNT1_F  (1 << 10)
+
+#define AVR32_PC_IRQ 0
+
+static const u32 int_mask[MAX_COUNTERS] = { PCCNT_IE, PCNT0_IE, PCNT1_IE };
+static const u32 ovf_mask[MAX_COUNTERS] = { PCCNT_F, PCNT0_F, PCNT1_F };
+
+static struct pc_counter results[MAX_COUNTERS];
+
+static void write_pccr(u32 val)
+{
+	sysreg_write(PCCR, val);
+}
+
+static u32 read_pccr(void)
+{
+	return sysreg_read(PCCR);
+}
+
+static u32 read_counter(int counter)
+{
+	switch (counter) {
+	case PCCNT:
+		return sysreg_read(PCCNT);
+	case PCNT0:
+		return sysreg_read(PCNT0);
+	case PCNT1:
+		return sysreg_read(PCNT1);
+	default:
+		return 0;
+	}
+}
+
+static void write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case PCCNT:
+		sysreg_write(PCCNT, val);
+	case PCNT0:
+		sysreg_write(PCNT0, val);
+	case PCNT1:
+		sysreg_write(PCNT1, val);
+	default:
+		break;
+	}
+}
+
+static int avr32_setup_ctrs(void)
+{
+	u32  pccr;
+	int i;
+
+	for (i = PCCNT; i < MAX_COUNTERS; i++) {
+		if (counter_config[i].enabled)
+			continue;
+
+		counter_config[i].event = EVT_UNUSED;
+	}
+
+	pccr = ((counter_config[PCNT1].event << 18)
+		| (counter_config[PCNT0].event << 12));
+	pr_debug("avr32_setup_ctrs: pccr: %#08x\n", pccr);
+	write_pccr(pccr);
+
+	for (i = PCCNT; i < MAX_COUNTERS; i++) {
+		if (counter_config[i].event == EVT_UNUSED) {
+			counter_config[i].event = 0;
+			continue;
+		}
+
+		results[i].reset_counter = counter_config[i].count;
+		write_counter(i, -(u32)counter_config[i].count);
+		pr_debug("avr32_setup_ctrs: counter%d %#08x from %#08lx\n",
+			 i, read_counter(i), counter_config[i].count);
+	}
+
+	return 0;
+}
+
+static void inline check_ctrs(void)
+{
+	int i;
+	u32 pccr = read_pccr();
+
+	/* Writeback clears overflow flag */
+	write_pccr(pccr & ~PC_ENABLE);
+
+	for (i = PCCNT; i < MAX_COUNTERS; i++) {
+		if (!(int_mask[i] & pccr))
+			continue;
+
+		if (pccr & ovf_mask[i])
+			results[i].ovf++;
+	}
+}
+
+static irqreturn_t avr32_pc_interrupt(int irq, void *arg,
+				      struct pt_regs *regs)
+{
+	int i;
+
+	/* Check if this is a performance counter interrupt */
+	if (!(intc_get_pending(irq) & 2))
+		return IRQ_NONE;
+
+	check_ctrs();
+
+	for (i = PCCNT; i < MAX_COUNTERS; i++) {
+		if (!results[i].ovf)
+			continue;
+
+		write_counter(i, -(u32)results[i].reset_counter);
+		oprofile_add_sample(regs, i);
+		results[i].ovf--;
+	}
+
+	/* Enable Performance Counter */
+	write_pccr(read_pccr() | PC_ENABLE);
+
+	return IRQ_HANDLED;
+}
+
+static void avr32_pc_stop(void)
+{
+	write_pccr(read_pccr() & ~PC_ENABLE);
+
+	free_irq(AVR32_PC_IRQ, results);
+}
+
+static int avr32_pc_start(void)
+{
+	int i, ret;
+	u32 pccr = read_pccr();
+
+	ret = request_irq(AVR32_PC_IRQ, avr32_pc_interrupt, IRQF_SHARED | IRQF_DISABLED,
+			  "AVR32 Performance Counter", (void *)results);
+
+	if (ret < 0) {
+		printk(KERN_ERR
+		       "oprofile: unable to request IRQ%d for AVR32"
+		       " Performance Counter\n",
+		       AVR32_PC_IRQ);
+		return ret;
+	}
+
+	/* Enable interrupts */
+	for (i = PCCNT; i < MAX_COUNTERS; i++) {
+		if (counter_config[i].enabled)
+			pccr |= int_mask[i];
+	}
+
+	/* Disable scaler */
+	pccr &= ~PC_CNT64;
+
+	/* Enable Performance Counter */
+	pccr |= PC_ENABLE;
+
+	write_pccr(pccr);
+	pr_debug("avr32_pc_start: pc: %#08x\n", pccr);
+	return 0;
+}
+
+
+struct op_avr32_model_spec op_avr32_spec = {
+	.init		= 0,
+	.setup_ctrs	= avr32_setup_ctrs,
+	.start		= avr32_pc_start,
+	.stop		= avr32_pc_stop,
+	.num_counters	= MAX_COUNTERS,
+	.name		= "avr32/at32ap7000",
+};
+
diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.h
--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,21 @@
+/**
+ * AVR32 Machine Specific Operations
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Ronny Pedersen
+ */
+#ifndef OP_MODEL_AVR32_H
+#define OP_MODEL_AVR32_H
+
+extern struct op_avr32_model_spec op_avr32_spec;
+extern int pc_init(struct oprofile_operations *ops,
+		   struct op_avr32_model_spec *spec);
+extern void pc_exit(void);
+
+
+#endif
diff -urN linux-2.6.20.4-0rig/drivers/char/at91_spi.c linux-2.6.20.4-atmel/drivers/char/at91_spi.c
--- linux-2.6.20.4-0rig/drivers/char/at91_spi.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/char/at91_spi.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,336 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
+ *
+ *  Copyright (C) SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_pdc.h>
+#include <asm/io.h>
+#include <asm/semaphore.h>
+
+#include <asm/arch/at91_spi.h>
+#include <asm/arch/board.h>
+#include <asm/arch/spi.h>
+
+#undef DEBUG_SPI
+
+static struct spi_local spi_dev[NR_SPI_DEVICES];	/* state of the SPI devices */
+static int spi_enabled = 0;
+static struct semaphore spi_lock;			/* protect access to SPI bus */
+static int current_device = -1;				/* currently selected SPI device */
+static struct clk *spi_clk;				/* SPI clock */
+static void __iomem *spi_base;				/* SPI peripheral base-address */
+
+DECLARE_COMPLETION(transfer_complete);
+
+
+#define at91_spi_read(reg)		__raw_readl(spi_base + (reg))
+#define at91_spi_write(reg, val)	__raw_writel((val), spi_base + (reg))
+
+
+/* ......................................................................... */
+
+/*
+ * Access and enable the SPI bus.
+ * This MUST be called before any transfers are performed.
+ */
+void spi_access_bus(short device)
+{
+	/* Ensure that requested device is valid */
+	if ((device < 0) || (device >= NR_SPI_DEVICES))
+		panic("at91_spi: spi_access_bus called with invalid device");
+
+	if (spi_enabled == 0) {
+		clk_enable(spi_clk);				/* Enable Peripheral clock */
+		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);	/* Enable SPI */
+#ifdef DEBUG_SPI
+		printk("SPI on\n");
+#endif
+	}
+	spi_enabled++;
+
+	/* Lock the SPI bus */
+	down(&spi_lock);
+	current_device = device;
+
+	/* Configure SPI bus for device */
+	at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
+}
+
+/*
+ * Relinquish control of the SPI bus.
+ */
+void spi_release_bus(short device)
+{
+	if (device != current_device)
+		panic("at91_spi: spi_release called with invalid device");
+
+	/* Release the SPI bus */
+	current_device = -1;
+	up(&spi_lock);
+
+	spi_enabled--;
+	if (spi_enabled == 0) {
+		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);	/* Disable SPI */
+		clk_disable(spi_clk);				/* Disable Peripheral clock */
+#ifdef DEBUG_SPI
+		printk("SPI off\n");
+#endif
+	}
+}
+
+/*
+ * Perform a data transfer over the SPI bus
+ */
+int spi_transfer(struct spi_transfer_list* list)
+{
+	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
+	int tx_size;
+
+	if (!list)
+		panic("at91_spi: spi_transfer called with NULL transfer list");
+	if (current_device == -1)
+		panic("at91_spi: spi_transfer called without acquiring bus");
+
+#ifdef DEBUG_SPI
+	printk("SPI transfer start [%i]\n", list->nr_transfers);
+#endif
+
+	/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
+	tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
+
+	/* Store transfer list */
+	device->xfers = list;
+	list->curr = 0;
+
+	/* Assume there must be at least one transfer */
+	device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
+	device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
+
+	/* Program PDC registers */
+	at91_spi_write(ATMEL_PDC_TPR, device->tx);
+	at91_spi_write(ATMEL_PDC_RPR, device->rx);
+	at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
+	at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
+
+	/* Is there a second transfer? */
+	if (list->nr_transfers > 1) {
+		device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
+		device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
+
+		/* Program Next PDC registers */
+		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
+		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
+		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
+		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
+	}
+	else {
+		device->txnext = 0;
+		device->rxnext = 0;
+		at91_spi_write(ATMEL_PDC_TNCR, 0);
+		at91_spi_write(ATMEL_PDC_RNCR, 0);
+	}
+
+	// TODO: If we are doing consecutive transfers (at high speed, or
+	//   small buffers), then it might be worth modifying the 'Delay between
+	//   Consecutive Transfers' in the CSR registers.
+	//   This is an issue if we cannot chain the next buffer fast enough
+	//   in the interrupt handler.
+
+	/* Enable transmitter and receiver */
+	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
+
+	at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX);		/* enable buffer complete interrupt */
+	wait_for_completion(&transfer_complete);
+
+#ifdef DEBUG_SPI
+	printk("SPI transfer end\n");
+#endif
+
+	return 0;
+}
+
+/* ......................................................................... */
+
+/*
+ * Handle interrupts from the SPI controller.
+ */
+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
+{
+	unsigned int status;
+	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
+	struct spi_transfer_list *list = device->xfers;
+
+#ifdef DEBUG_SPI
+	printk("SPI interrupt %i\n", current_device);
+#endif
+
+	if (!list)
+		panic("at91_spi: spi_interrupt with a NULL transfer list");
+
+		status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR);	/* read status */
+
+	dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
+	dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
+
+	device->tx = device->txnext;	/* move next transfer to current transfer */
+	device->rx = device->rxnext;
+
+	list->curr = list->curr + 1;
+	if (list->curr == list->nr_transfers) {		/* all transfers complete */
+		at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX);		/* disable interrupt */
+
+		/* Disable transmitter and receiver */
+		at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+
+		device->xfers = NULL;
+		complete(&transfer_complete);
+	}
+	else if (list->curr+1 == list->nr_transfers) {	/* no more next transfers */
+		device->txnext = 0;
+		device->rxnext = 0;
+		at91_spi_write(ATMEL_PDC_TNCR, 0);
+		at91_spi_write(ATMEL_PDC_RNCR, 0);
+	}
+	else {
+		int i = (list->curr)+1;
+
+		/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
+		int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
+
+		device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
+		device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
+		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
+		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
+		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
+		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
+	}
+	return IRQ_HANDLED;
+}
+
+/* ......................................................................... */
+
+/*
+ * Initialize the SPI controller
+ */
+static int __init at91spi_probe(struct platform_device *pdev)
+{
+	int i;
+	unsigned long scbr;
+	struct resource *res;
+
+	init_MUTEX(&spi_lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
+		return -EBUSY;
+
+	spi_base = ioremap(res->start, res->end - res->start + 1);
+	if (!spi_base) {
+		release_mem_region(res->start, res->end - res->start + 1);
+		return -ENOMEM;
+	}
+
+	spi_clk = clk_get(NULL, "spi_clk");
+	if (IS_ERR(spi_clk)) {
+		printk(KERN_ERR "at91_spi: no clock defined\n");
+		iounmap(spi_base);
+		release_mem_region(res->start, res->end - res->start + 1);
+		return -ENODEV;
+	}
+
+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST);	/* software reset of SPI controller */
+
+	/*
+	 * Calculate the correct SPI baud-rate divisor.
+	 */
+	scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
+	scbr = scbr + 1;		/* round up */
+
+	printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
+
+	/* Set Chip Select registers to good defaults */
+	for (i = 0; i < 4; i++) {
+		at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
+	}
+
+	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+
+	memset(&spi_dev, 0, sizeof(spi_dev));
+	spi_dev[0].pcs = 0xE;
+	spi_dev[1].pcs = 0xD;
+	spi_dev[2].pcs = 0xB;
+	spi_dev[3].pcs = 0x7;
+
+	if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
+		clk_put(spi_clk);
+		iounmap(spi_base);
+		release_mem_region(res->start, res->end - res->start + 1);
+		return -EBUSY;
+	}
+
+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);		/* Enable SPI */
+
+	return 0;
+}
+
+static int __devexit at91spi_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);		/* Disable SPI */
+	clk_put(spi_clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap(spi_base);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	free_irq(AT91RM9200_ID_SPI, 0);
+	return 0;
+}
+
+static struct platform_driver at91spi_driver = {
+	.probe		= at91spi_probe,
+	.remove		= __devexit_p(at91spi_remove),
+	.driver		= {
+		.name	= "at91_spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at91spi_init(void)
+{
+	return platform_driver_register(&at91spi_driver);
+}
+
+static void __exit at91spi_exit(void)
+{
+	platform_driver_unregister(&at91spi_driver);
+}
+
+EXPORT_SYMBOL(spi_access_bus);
+EXPORT_SYMBOL(spi_release_bus);
+EXPORT_SYMBOL(spi_transfer);
+
+module_init(at91spi_init);
+module_exit(at91spi_exit);
+
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
diff -urN linux-2.6.20.4-0rig/drivers/char/at91_spidev.c linux-2.6.20.4-atmel/drivers/char/at91_spidev.c
--- linux-2.6.20.4-0rig/drivers/char/at91_spidev.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/char/at91_spidev.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,236 @@
+/*
+ * User-space interface to the SPI bus on Atmel AT91RM9200
+ *
+ *  Copyright (C) 2003 SAN People (Pty) Ltd
+ *
+ * Based on SPI driver by Rick Bronson
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <asm/arch/spi.h>
+
+#ifdef CONFIG_DEVFS_FS
+#include <linux/devfs_fs_kernel.h>
+#endif
+
+
+#undef DEBUG_SPIDEV
+
+/* ......................................................................... */
+
+/*
+ * Read or Write to SPI bus.
+ */
+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
+{
+	unsigned int spi_device = (unsigned int) file->private_data;
+
+	struct mm_struct * mm;
+	struct page ** maplist;
+	struct spi_transfer_list* list;
+	int    pgcount;
+
+	unsigned int ofs, pagelen;
+	int res, i, err;
+
+	if (!count) {
+		return 0;
+	}
+
+	list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
+	if (!list) {
+		return -ENOMEM;
+	}
+
+	mm = current->mm;
+
+	pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
+
+	if (pgcount >= MAX_SPI_TRANSFERS) {
+		kfree(list);
+		return -EFBIG;
+	}
+
+	maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
+
+	if (!maplist) {
+		kfree(list);
+		return -ENOMEM;
+	}
+	flush_cache_all();
+	down_read(&mm->mmap_sem);
+	err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
+	up_read(&mm->mmap_sem);
+
+	if (err < 0) {
+		kfree(list);
+		kfree(maplist);
+		return err;
+	}
+	pgcount = err;
+
+#ifdef DEBUG_SPIDEV
+	printk("spidev_rd_rw: %i %i\n", count, pgcount);
+#endif
+
+	/* Set default return value = transfer length */
+	res = count;
+
+	/*
+	 * At this point, the virtual area buf[0] .. buf[count-1] will have
+	 * corresponding pages mapped in the physical memory and locked until
+	 * we unmap the kiobuf.  The pages cannot be swapped out or moved
+	 * around.
+	 */
+	ofs = (unsigned long) buf & (PAGE_SIZE -1);
+	pagelen = PAGE_SIZE - ofs;
+	if (count < pagelen)
+		pagelen = count;
+
+	for (i = 0; i < pgcount; i++) {
+		flush_dcache_page(maplist[i]);
+
+		list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
+		list->txlen[i] = list->rxlen[i] = pagelen;
+
+#ifdef DEBUG_SPIDEV
+		printk("  %i: %x  (%i)\n", i, list->tx[i], list->txlen[i]);
+#endif
+
+		ofs = 0;	/* all subsequent transfers start at beginning of a page */
+		count = count - pagelen;
+		pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
+	}
+	list->nr_transfers = pgcount;
+
+	/* Perform transfer on SPI bus */
+	spi_access_bus(spi_device);
+	spi_transfer(list);
+	spi_release_bus(spi_device);
+
+	while (pgcount--) {
+		page_cache_release (maplist[pgcount]);
+	}
+	flush_cache_all();
+
+	kfree(maplist);
+	kfree(list);
+
+	return res;
+}
+
+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int spi_device = MINOR(inode->i_rdev);
+
+	if (spi_device >= NR_SPI_DEVICES)
+		return -ENODEV;
+
+	// TODO: This interface can be used to configure the SPI bus.
+	// Configurable options could include: Speed, Clock Polarity, Clock Phase
+
+	switch(cmd) {
+		default:
+			return -ENOIOCTLCMD;
+	}
+}
+
+/*
+ * Open the SPI device
+ */
+static int spidev_open(struct inode *inode, struct file *file)
+{
+	unsigned int spi_device = MINOR(inode->i_rdev);
+
+	if (spi_device >= NR_SPI_DEVICES)
+		return -ENODEV;
+
+	/*
+	 * 'private_data' is actually a pointer, but we overload it with the
+	 * value we want to store.
+	 */
+	file->private_data = (void *)spi_device;
+
+	return 0;
+}
+
+/*
+ * Close the SPI device
+ */
+static int spidev_close(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/* ......................................................................... */
+
+static struct file_operations spidev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= spidev_rd_wr,
+	.write		= (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
+	.ioctl		= spidev_ioctl,
+	.open		= spidev_open,
+	.release	= spidev_close,
+};
+
+/*
+ * Install the SPI /dev interface driver
+ */
+static int __init at91_spidev_init(void)
+{
+#ifdef CONFIG_DEVFS_FS
+	int i;
+#endif
+
+	if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
+		printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
+		return -EIO;
+	}
+
+#ifdef CONFIG_DEVFS_FS
+	devfs_mk_dir("spi");
+	for (i = 0; i < NR_SPI_DEVICES; i++) {
+		devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
+	}
+#endif
+	printk(KERN_INFO "AT91 SPI driver loaded\n");
+
+	return 0;
+}
+
+/*
+ * Remove the SPI /dev interface driver
+ */
+static void __exit at91_spidev_exit(void)
+{
+#ifdef CONFIG_DEVFS_FS
+	int i;
+	for (i = 0; i < NR_SPI_DEVICES; i++) {
+		devfs_remove("spi/%d", i);
+	}
+
+	devfs_remove("spi");
+#endif
+
+	if (unregister_chrdev(SPI_MAJOR, "spi")) {
+		printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
+		return;
+	}
+}
+
+module_init(at91_spidev_init);
+module_exit(at91_spidev_exit);
+
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
diff -urN linux-2.6.20.4-0rig/drivers/char/Kconfig linux-2.6.20.4-atmel/drivers/char/Kconfig
--- linux-2.6.20.4-0rig/drivers/char/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/char/Kconfig	2007-03-24 16:39:15.000000000 +0100
@@ -1030,5 +1030,21 @@
 	  sysfs directory, /sys/devices/platform/telco_clock, with a number of
 	  files for controlling the behavior of this hardware.
 
+config AT91_SPI
+	bool "SPI driver (legacy) for AT91RM9200 processors"
+	depends on ARCH_AT91RM9200
+	default y
+	help
+	  The SPI driver gives access to this serial bus on the AT91RM9200
+	  processor.
+
+config AT91_SPIDEV
+	bool "SPI device interface (legacy) for AT91RM9200 processors"
+	depends on ARCH_AT91RM9200 && AT91_SPI
+	default n
+	help
+	  The SPI driver gives user mode access to this serial
+	  bus on the AT91RM9200 processor.
+
 endmenu
 
diff -urN linux-2.6.20.4-0rig/drivers/char/Makefile linux-2.6.20.4-atmel/drivers/char/Makefile
--- linux-2.6.20.4-0rig/drivers/char/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/char/Makefile	2007-03-24 16:39:15.000000000 +0100
@@ -90,6 +90,8 @@
 obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
 obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
+obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
 
 obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_MWAVE)		+= mwave/
diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/atmeltwi.h linux-2.6.20.4-atmel/drivers/i2c/busses/atmeltwi.h
--- linux-2.6.20.4-0rig/drivers/i2c/busses/atmeltwi.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/i2c/busses/atmeltwi.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,117 @@
+/*
+ * Register definitions for the Atmel Two-Wire Interface
+ */
+
+#ifndef __ASM_AVR32_TWI_H__
+#define __ASM_AVR32_TWI_H__
+
+/* TWI register offsets */
+#define TWI_CR					0x0000
+#define TWI_MMR					0x0004
+#define TWI_SMR					0x0008
+#define TWI_IADR				0x000c
+#define TWI_CWGR				0x0010
+#define TWI_SR					0x0020
+#define TWI_IER					0x0024
+#define TWI_IDR					0x0028
+#define TWI_IMR					0x002c
+#define TWI_RHR					0x0030
+#define TWI_THR					0x0034
+
+/* Bitfields in CR */
+#define TWI_START_OFFSET			0
+#define TWI_START_SIZE				1
+#define TWI_STOP_OFFSET				1
+#define TWI_STOP_SIZE				1
+#define TWI_MSEN_OFFSET				2
+#define TWI_MSEN_SIZE				1
+#define TWI_MSDIS_OFFSET			3
+#define TWI_MSDIS_SIZE				1
+#define TWI_SVEN_OFFSET				4
+#define TWI_SVEN_SIZE				1
+#define TWI_SVDIS_OFFSET			5
+#define TWI_SVDIS_SIZE				1
+#define TWI_SWRST_OFFSET			7
+#define TWI_SWRST_SIZE				1
+
+/* Bitfields in MMR */
+#define TWI_IADRSZ_OFFSET			8
+#define TWI_IADRSZ_SIZE				2
+#define TWI_MREAD_OFFSET			12
+#define TWI_MREAD_SIZE				1
+#define TWI_DADR_OFFSET				16
+#define TWI_DADR_SIZE				7
+
+/* Bitfields in SMR */
+#define TWI_SADR_OFFSET				16
+#define TWI_SADR_SIZE				7
+
+/* Bitfields in IADR */
+#define TWI_IADR_OFFSET				0
+#define TWI_IADR_SIZE				24
+
+/* Bitfields in CWGR */
+#define TWI_CLDIV_OFFSET			0
+#define TWI_CLDIV_SIZE				8
+#define TWI_CHDIV_OFFSET			8
+#define TWI_CHDIV_SIZE				8
+#define TWI_CKDIV_OFFSET			16
+#define TWI_CKDIV_SIZE				3
+
+/* Bitfields in SR */
+#define TWI_TXCOMP_OFFSET			0
+#define TWI_TXCOMP_SIZE				1
+#define TWI_RXRDY_OFFSET			1
+#define TWI_RXRDY_SIZE				1
+#define TWI_TXRDY_OFFSET			2
+#define TWI_TXRDY_SIZE				1
+#define TWI_SVDIR_OFFSET			3
+#define TWI_SVDIR_SIZE				1
+#define TWI_SVACC_OFFSET			4
+#define TWI_SVACC_SIZE				1
+#define TWI_GCACC_OFFSET			5
+#define TWI_GCACC_SIZE				1
+#define TWI_OVRE_OFFSET				6
+#define TWI_OVRE_SIZE				1
+#define TWI_UNRE_OFFSET				7
+#define TWI_UNRE_SIZE				1
+#define TWI_NACK_OFFSET				8
+#define TWI_NACK_SIZE				1
+#define TWI_ARBLST_OFFSET			9
+#define TWI_ARBLST_SIZE				1
+
+/* Bitfields in RHR */
+#define TWI_RXDATA_OFFSET			0
+#define TWI_RXDATA_SIZE				8
+
+/* Bitfields in THR */
+#define TWI_TXDATA_OFFSET			0
+#define TWI_TXDATA_SIZE				8
+
+/* Constants for IADRSZ */
+#define TWI_IADRSZ_NO_ADDR			0
+#define TWI_IADRSZ_ONE_BYTE			1
+#define TWI_IADRSZ_TWO_BYTES			2
+#define TWI_IADRSZ_THREE_BYTES			3
+
+/* Bit manipulation macros */
+#define TWI_BIT(name)					\
+	(1 << TWI_##name##_OFFSET)
+#define TWI_BF(name,value)				\
+	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
+	 << TWI_##name##_OFFSET)
+#define TWI_BFEXT(name,value)				\
+	(((value) >> TWI_##name##_OFFSET)		\
+	 & ((1 << TWI_##name##_SIZE) - 1))
+#define TWI_BFINS(name,value,old)			\
+	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
+		    << TWI_##name##_OFFSET))		\
+	 | TWI_BF(name,value))
+
+/* Register access macros */
+#define twi_readl(port,reg)				\
+	__raw_readl((port)->regs + TWI_##reg)
+#define twi_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + TWI_##reg)
+
+#endif /* __ASM_AVR32_TWI_H__ */
diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-at91.c linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-at91.c
--- linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-at91.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-at91.c	2007-03-24 16:39:15.000000000 +0100
@@ -31,8 +31,11 @@
 #include <asm/arch/board.h>
 #include <asm/arch/cpu.h>
 
-#define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
 
+/* Clockrate is configurable - max 400 Kbits/sec */
+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
+module_param(clockrate, uint, 0);
+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
 
 static struct clk *twi_clk;
 static void __iomem *twi_base;
@@ -53,7 +56,7 @@
 	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);	/* Set Master mode */
 
 	/* Calcuate clock dividers */
-	cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
+	cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
 	cdiv = cdiv + 1;	/* round up */
 	ckdiv = 0;
 	while (cdiv > 255) {
@@ -63,9 +66,14 @@
 
 	if (cpu_is_at91rm9200()) {			/* AT91RM9200 Errata #22 */
 		if (ckdiv > 5) {
-			printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+			printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
 			ckdiv = 5;
 		}
+	} else {
+		if (ckdiv > 7) {
+			printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
+			ckdiv = 7;
+		}
 	}
 
 	at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-atmeltwi.c linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-atmeltwi.c
--- linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-atmeltwi.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-atmeltwi.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,348 @@
+/*
+ * i2c Support for Atmel's Two-Wire Interface (TWI)
+ *
+ * Based on the work of Copyright (C) 2004 Rick Bronson
+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
+ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com>
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Borrowed heavily from the original work by:
+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <asm/io.h>
+#include <linux/time.h>
+#include "atmeltwi.h"
+
+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
+
+
+struct atmel_twi {
+	void __iomem *regs;
+	struct i2c_adapter adapter;
+	struct clk *pclk;
+	spinlock_t lock;
+	struct completion comp;
+	u32 intmask;
+	u8 *buf;
+	u8 len;
+	u8 acks_left;
+	unsigned int irq;
+
+};
+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
+
+/*
+ * Initialize the TWI hardware registers.
+ */
+static int __devinit twi_hwinit(struct atmel_twi *twi)
+{
+	unsigned long cdiv, ckdiv=0;
+
+	twi_writel(twi, IDR, ~0UL);
+	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
+	twi_readl(twi, SR);
+
+	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
+
+	while (cdiv > 255) {
+		ckdiv++;
+		cdiv = cdiv >> 1;
+	}
+
+	if (ckdiv > 7)
+		return -EINVAL;
+	else
+		twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
+			       | TWI_BF(CHDIV, cdiv)
+			       | TWI_BF(CLDIV, cdiv)));
+	return 0;
+}
+
+/*
+ * Waits for the i2c status register to set the specified bitmask
+ * Returns 0 if timed out (~100ms).
+ */
+static short twi_wait_for_completion(struct atmel_twi *twi,
+		u32 mask)
+{
+	int timeout = msecs_to_jiffies(100);
+
+	twi->intmask = mask;
+	init_completion(&twi->comp);
+
+	twi_writel(twi, IER, mask);
+
+	if(!wait_for_completion_timeout(&twi->comp, timeout))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ */
+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct atmel_twi *twi = to_atmel_twi(adap);
+	struct i2c_msg *pmsg;
+	int i;
+
+	/* get first message */
+	pmsg = msgs;
+
+	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
+
+	for (i = 0; i < num; i++, pmsg++) {
+
+		twi->len = pmsg->len;
+		twi->buf = pmsg->buf;
+		twi->acks_left = pmsg->len;
+		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
+			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
+		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
+
+		dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
+			i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
+			pmsg->len > 1 ? "s" : "",
+			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
+		/* enable */
+		twi_writel(twi, CR, TWI_BIT(MSEN));
+
+		if (pmsg->flags & I2C_M_RD) {
+			twi_writel(twi, CR, TWI_BIT(START));
+			if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) {
+				dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
+					twi->acks_left);
+				return -ETIMEDOUT;
+			}
+
+			/* Send Stop, and Wait until transfer is finished */
+			if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) {
+				dev_dbg(&adap->dev, "TXCOMP timeout\n");
+				return -ETIMEDOUT;
+			}
+
+		} else {
+			twi_writel(twi, THR, twi->buf[0]);
+			if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) {
+				dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
+				twi->acks_left);
+				return -ETIMEDOUT;
+			}
+		}
+
+		/* Disable TWI interface */
+		twi_writel(twi, CR, TWI_BIT(MSDIS));
+
+	} /* end cur msg */
+
+	return i;
+}
+
+
+static irqreturn_t twi_interrupt(int irq, void *dev_id)
+{
+	struct atmel_twi *twi = dev_id;
+	int status = twi_readl(twi, SR);
+
+	if (twi->intmask & status){
+		if (twi->intmask & TWI_BIT(NACK)) {
+			goto nack;
+		} else if (twi->intmask & TWI_BIT(RXRDY)){
+			twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR);
+			if(--twi->acks_left==1)
+				twi_writel(twi, CR, TWI_BIT(STOP));
+			if (twi->acks_left==0)
+				goto complete;
+		} else if (twi->intmask & TWI_BIT(TXRDY)) {
+			twi->acks_left--;
+			if (twi->acks_left==0) {
+				twi->intmask = TWI_BIT(TXCOMP);
+				twi_writel(twi, IER, TWI_BIT(TXCOMP));
+			} else
+				twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
+		} else if (twi->intmask & TWI_BIT(TXCOMP)) {
+			goto complete;
+		}
+	}
+
+	return IRQ_HANDLED;
+
+nack:
+	printk(KERN_INFO "NACK received!\n");
+
+complete:
+	twi_writel(twi, IDR, ~0UL);
+	complete(&twi->comp);
+
+	return IRQ_HANDLED;
+
+}
+
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 twi_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm twi_algorithm = {
+	.master_xfer	= twi_xfer,
+	.functionality	= twi_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __devinit twi_probe(struct platform_device *pdev)
+{
+	struct atmel_twi *twi;
+	struct resource *regs;
+	struct clk *pclk;
+	struct i2c_adapter *adapter;
+	int rc, irq;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+	clk_enable(pclk);
+
+	rc = -ENOMEM;
+	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
+	if (!twi) {
+		dev_err(&pdev->dev, "can't allocate interface!\n");
+		goto err_alloc_twi;
+	}
+
+	twi->pclk = pclk;
+	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!twi->regs)
+		goto err_ioremap;
+
+	irq = platform_get_irq(pdev,0);
+	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
+	if (rc) {
+		dev_err(&pdev->dev, "can't bind irq!\n");
+		goto err_irq;
+	}
+	twi->irq = irq;
+
+	rc = twi_hwinit(twi);
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to set baudrate\n");
+		goto err_hw_init;
+	}
+
+	adapter = &twi->adapter;
+	sprintf(adapter->name, "TWI");
+	adapter->algo = &twi_algorithm;
+	adapter->class = I2C_CLASS_HWMON;
+	adapter->dev.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, twi);
+
+	rc = i2c_add_adapter(adapter);
+	if (rc) {
+		dev_err(&pdev->dev, "Adapter %s registration failed\n",
+			adapter->name);
+		goto err_register;
+	}
+
+	dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
+		 baudrate/1000, (unsigned long)regs->start);
+
+	return 0;
+
+
+err_register:
+	platform_set_drvdata(pdev, NULL);
+
+err_hw_init:
+	free_irq(irq, twi);
+
+err_irq:
+	iounmap(twi->regs);
+
+err_ioremap:
+	kfree(twi);
+
+err_alloc_twi:
+	clk_disable(pclk);
+	clk_put(pclk);
+
+	return rc;
+}
+
+static int __devexit twi_remove(struct platform_device *pdev)
+{
+	struct atmel_twi *twi = platform_get_drvdata(pdev);
+	int res;
+
+	platform_set_drvdata(pdev, NULL);
+	res = i2c_del_adapter(&twi->adapter);
+	twi_writel(twi, CR, TWI_BIT(MSDIS));
+	iounmap(twi->regs);
+	clk_disable(twi->pclk);
+	clk_put(twi->pclk);
+	free_irq(twi->irq, twi);
+	kfree(twi);
+
+	return res;
+}
+
+static struct platform_driver twi_driver = {
+	.probe		= twi_probe,
+	.remove		= __devexit_p(twi_remove),
+	.driver		= {
+		.name	= "atmel_twi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init atmel_twi_init(void)
+{
+	return platform_driver_register(&twi_driver);
+}
+
+static void __exit atmel_twi_exit(void)
+{
+	platform_driver_unregister(&twi_driver);
+}
+
+module_init(atmel_twi_init);
+module_exit(atmel_twi_exit);
+
+MODULE_AUTHOR("Espen Krangnes");
+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/Kconfig linux-2.6.20.4-atmel/drivers/i2c/busses/Kconfig
--- linux-2.6.20.4-0rig/drivers/i2c/busses/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/i2c/busses/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -5,6 +5,26 @@
 menu "I2C Hardware Bus support"
 	depends on I2C
 
+config I2C_ATMELTWI
+	tristate "Atmel TWI/I2C"
+	depends on I2C
+	help
+	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
+	  AT91-based device and want to use its built-in TWI
+	  functionality. Atmel's TWI is compatible with Philips' I2C
+	  protocol. If in doubt, say NO
+
+config I2C_ATMELTWI_BAUDRATE
+	prompt "Atmel TWI baudrate"
+	depends on I2C_ATMELTWI
+	int
+	default 100000
+	help
+	  Set the TWI/I2C baudrate. This will alter the default value. A
+	  different baudrate can be set by using a module parameter as well. If
+	  no parameter is provided when loading, this is the value that will be
+	  used.
+
 config I2C_ALI1535
 	tristate "ALI 1535"
 	depends on I2C && PCI
@@ -81,6 +101,14 @@
 	  This supports the use of the I2C interface on Atmel AT91
 	  processors.
 
+config I2C_AT91_CLOCKRATE
+	prompt "Atmel AT91 I2C/TWI clock-rate"
+	depends on I2C_AT91
+	int
+	default 100000
+	help
+	  Set the AT91 I2C/TWI clock-rate.
+
 config I2C_AU1550
 	tristate "Au1550/Au1200 SMBus interface"
 	depends on I2C && (SOC_AU1550 || SOC_AU1200)
diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/Makefile linux-2.6.20.4-atmel/drivers/i2c/busses/Makefile
--- linux-2.6.20.4-0rig/drivers/i2c/busses/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/i2c/busses/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -46,6 +46,7 @@
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
 EXTRA_CFLAGS += -DDEBUG
diff -urN linux-2.6.20.4-0rig/drivers/input/touchscreen/ads7846.c linux-2.6.20.4-atmel/drivers/input/touchscreen/ads7846.c
--- linux-2.6.20.4-0rig/drivers/input/touchscreen/ads7846.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/input/touchscreen/ads7846.c	2007-03-24 16:39:15.000000000 +0100
@@ -17,8 +17,9 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-#include <linux/device.h>
+#include <linux/hwmon.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
@@ -38,7 +39,8 @@
 /*
  * This code has been heavily tested on a Nokia 770, and lightly
  * tested on other ads7846 devices (OSK/Mistral, Lubbock).
- * Support for ads7843 and ads7845 has only been stubbed in.
+ * Support for ads7843 tested on Atmel at91sam926x-EK.
+ * Support for ads7845 has only been stubbed in.
  *
  * IRQ handling needs a workaround because of a shortcoming in handling
  * edge triggered IRQs on some platforms like the OMAP1/2. These
@@ -54,7 +56,8 @@
  * files.
  */
 
-#define	TS_POLL_PERIOD	msecs_to_jiffies(10)
+#define TS_POLL_DELAY	(1 * 1000000)	/* ns delay before the first sample */
+#define TS_POLL_PERIOD	(5 * 1000000)	/* ns delay between samples */
 
 /* this driver doesn't aim at the peak continuous sample rate */
 #define	SAMPLE_BITS	(8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
@@ -63,12 +66,12 @@
 	/* For portability, we can't read 12 bit values using SPI (which
 	 * would make the controller deliver them as native byteorder u16
 	 * with msbs zeroed).  Instead, we read them as two 8-bit values,
-	 * which need byteswapping then range adjustment.
+	 * *** WHICH NEED BYTESWAPPING *** and range adjustment.
 	 */
-	__be16 x;
-	__be16 y;
-	__be16 z1, z2;
-	int    ignore;
+	u16	x;
+	u16	y;
+	u16	z1, z2;
+	int	ignore;
 };
 
 struct ads7846 {
@@ -76,7 +79,12 @@
 	char			phys[32];
 
 	struct spi_device	*spi;
+
+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
 	struct attribute_group	*attr_group;
+	struct class_device	*hwmon;
+#endif
+
 	u16			model;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
@@ -99,13 +107,16 @@
 	u16			debounce_rep;
 
 	spinlock_t		lock;
-	struct timer_list	timer;		/* P: lock */
+	struct hrtimer		timer;
 	unsigned		pendown:1;	/* P: lock */
 	unsigned		pending:1;	/* P: lock */
 // FIXME remove "irq_disabled"
 	unsigned		irq_disabled:1;	/* P: lock */
 	unsigned		disabled:1;
 
+	int			(*filter)(void *data, int data_idx, int *val);
+	void			*filter_data;
+	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
 };
 
@@ -142,15 +153,16 @@
 #define	MAX_12BIT	((1<<12)-1)
 
 /* leave ADC powered up (disables penirq) between differential samples */
-#define	READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \
-	| ADS_12_BIT | ADS_DFR)
-
-#define	READ_Y	(READ_12BIT_DFR(y)  | ADS_PD10_ADC_ON)
-#define	READ_Z1	(READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
-#define	READ_Z2	(READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
+#define	READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
+	| ADS_12_BIT | ADS_DFR | \
+	(adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
+
+#define	READ_Y(vref)	(READ_12BIT_DFR(y,  1, vref))
+#define	READ_Z1(vref)	(READ_12BIT_DFR(z1, 1, vref))
+#define	READ_Z2(vref)	(READ_12BIT_DFR(z2, 1, vref))
 
-#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_ADC_ON)
-#define	PWRDOWN	(READ_12BIT_DFR(y)  | ADS_PD10_PDOWN)	/* LAST */
+#define	READ_X(vref)	(READ_12BIT_DFR(x,  1, vref))
+#define	PWRDOWN		(READ_12BIT_DFR(y,  0, 0))	/* LAST */
 
 /* single-ended samples need to first power up reference voltage;
  * we leave both ADC and VREF powered
@@ -158,14 +170,19 @@
 #define	READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
 	| ADS_12_BIT | ADS_SER)
 
-#define	REF_ON	(READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
-#define	REF_OFF	(READ_12BIT_DFR(y) | ADS_PD10_PDOWN)
+#define	REF_ON	(READ_12BIT_DFR(x, 1, 1))
+#define	REF_OFF	(READ_12BIT_DFR(y, 0, 0))
 
 /*--------------------------------------------------------------------------*/
 
 /*
  * Non-touchscreen sensors only use single-ended conversions.
+ * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
+ * ads7846 lets that pin be unconnected, to use internal vREF.
  */
+static unsigned vREF_mV;
+module_param(vREF_mV, uint, 0);
+MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts");
 
 struct ser_req {
 	u8			ref_on;
@@ -193,50 +210,53 @@
 	struct ser_req		*req = kzalloc(sizeof *req, GFP_KERNEL);
 	int			status;
 	int			sample;
-	int			i;
+	int			use_internal;
 
 	if (!req)
 		return -ENOMEM;
 
 	spi_message_init(&req->msg);
 
-	/* activate reference, so it has time to settle; */
-	req->ref_on = REF_ON;
-	req->xfer[0].tx_buf = &req->ref_on;
-	req->xfer[0].len = 1;
-	req->xfer[1].rx_buf = &req->scratch;
-	req->xfer[1].len = 2;
-
-	/*
-	 * for external VREF, 0 usec (and assume it's always on);
-	 * for 1uF, use 800 usec;
-	 * no cap, 100 usec.
-	 */
-	req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+	/* FIXME boards with ads7846 might use external vref instead ... */
+	use_internal = (ts->model == 7846);
+
+	/* maybe turn on internal vREF, and let it settle */
+	if (use_internal) {
+		req->ref_on = REF_ON;
+		req->xfer[0].tx_buf = &req->ref_on;
+		req->xfer[0].len = 1;
+		spi_message_add_tail(&req->xfer[0], &req->msg);
+
+		req->xfer[1].rx_buf = &req->scratch;
+		req->xfer[1].len = 2;
+
+		/* for 1uF, settle for 800 usec; no cap, 100 usec.  */
+		req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+		spi_message_add_tail(&req->xfer[1], &req->msg);
+	}
 
 	/* take sample */
 	req->command = (u8) command;
 	req->xfer[2].tx_buf = &req->command;
 	req->xfer[2].len = 1;
+	spi_message_add_tail(&req->xfer[2], &req->msg);
+
 	req->xfer[3].rx_buf = &req->sample;
 	req->xfer[3].len = 2;
+	spi_message_add_tail(&req->xfer[3], &req->msg);
 
 	/* REVISIT:  take a few more samples, and compare ... */
 
-	/* turn off reference */
-	req->ref_off = REF_OFF;
+	/* converter in low power mode & enable PENIRQ */
+	req->ref_off = PWRDOWN;
 	req->xfer[4].tx_buf = &req->ref_off;
 	req->xfer[4].len = 1;
+	spi_message_add_tail(&req->xfer[4], &req->msg);
+
 	req->xfer[5].rx_buf = &req->scratch;
 	req->xfer[5].len = 2;
-
 	CS_CHANGE(req->xfer[5]);
-
-	/* group all the transfers together, so we can't interfere with
-	 * reading touchscreen state; disable penirq while sampling
-	 */
-	for (i = 0; i < 6; i++)
-		spi_message_add_tail(&req->xfer[i], &req->msg);
+	spi_message_add_tail(&req->xfer[5], &req->msg);
 
 	ts->irq_disabled = 1;
 	disable_irq(spi->irq);
@@ -256,25 +276,173 @@
 	return status ? status : sample;
 }
 
-#define SHOW(name) static ssize_t \
+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
+
+#define SHOW(name, var, adjust) static ssize_t \
 name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
 { \
+	struct ads7846 *ts = dev_get_drvdata(dev); \
 	ssize_t v = ads7846_read12_ser(dev, \
-			READ_12BIT_SER(name) | ADS_PD10_ALL_ON); \
+			READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \
 	if (v < 0) \
 		return v; \
-	return sprintf(buf, "%u\n", (unsigned) v); \
+	return sprintf(buf, "%u\n", adjust(ts, v)); \
 } \
 static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
 
-SHOW(temp0)
-SHOW(temp1)
-SHOW(vaux)
-SHOW(vbatt)
+
+/* Sysfs conventions report temperatures in millidegrees Celcius.
+ * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
+ * accuracy scheme without calibration data.  For now we won't try either;
+ * userspace sees raw sensor values, and must scale/calibrate appropriately.
+ */
+static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
+{
+	return v;
+}
+
+SHOW(temp0, temp0, null_adjust)		/* temp1_input */
+SHOW(temp1, temp1, null_adjust)		/* temp2_input */
+
+
+/* sysfs conventions report voltages in millivolts.  We can convert voltages
+ * if we know vREF.  userspace may need to scale vAUX to match the board's
+ * external resistors; we assume that vBATT only uses the internal ones.
+ */
+static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
+{
+	unsigned retval = v;
+
+	/* external resistors may scale vAUX into 0..vREF */
+	retval *= vREF_mV;
+	retval = retval >> 12;
+	return retval;
+}
+
+static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
+{
+	unsigned retval = vaux_adjust(ts, v);
+
+	/* ads7846 has a resistor ladder to scale this signal down */
+	if (ts->model == 7846)
+		retval *= 4;
+	return retval;
+}
+
+SHOW(in0_input, vaux, vaux_adjust)
+SHOW(in1_input, vbatt, vbatt_adjust)
+
+
+static struct attribute *ads7846_attributes[] = {
+	&dev_attr_temp0.attr,
+	&dev_attr_temp1.attr,
+	&dev_attr_in0_input.attr,
+	&dev_attr_in1_input.attr,
+	NULL,
+};
+
+static struct attribute_group ads7846_attr_group = {
+	.attrs = ads7846_attributes,
+};
+
+static struct attribute *ads7843_attributes[] = {
+	&dev_attr_in0_input.attr,
+	&dev_attr_in1_input.attr,
+	NULL,
+};
+
+static struct attribute_group ads7843_attr_group = {
+	.attrs = ads7843_attributes,
+};
+
+static struct attribute *ads7845_attributes[] = {
+	&dev_attr_in0_input.attr,
+	NULL,
+};
+
+static struct attribute_group ads7845_attr_group = {
+	.attrs = ads7845_attributes,
+};
+
+static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
+{
+	struct class_device *hwmon;
+	int err;
+
+	/* hwmon sensors need a reference voltage */
+	switch (ts->model) {
+	case 7846:
+		if (!vREF_mV) {
+			dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
+			vREF_mV = 2500;
+		}
+		break;
+	case 7845:
+	case 7843:
+		if (!vREF_mV) {
+			dev_warn(&spi->dev,
+				"external vREF for ADS%d not specified\n",
+				ts->model);
+			return 0;
+		}
+		break;
+	}
+
+	/* different chips have different sensor groups */
+	switch (ts->model) {
+	case 7846:
+		ts->attr_group = &ads7846_attr_group;
+		break;
+	case 7845:
+		ts->attr_group = &ads7845_attr_group;
+		break;
+	case 7843:
+		ts->attr_group = &ads7843_attr_group;
+		break;
+	default:
+		dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model);
+		return 0;
+	}
+
+	err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
+	if (err)
+		return err;
+
+	hwmon = hwmon_device_register(&spi->dev);
+	if (IS_ERR(hwmon)) {
+		sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+		return PTR_ERR(hwmon);
+	}
+
+	ts->hwmon = hwmon;
+	return 0;
+}
+
+static void ads784x_hwmon_unregister(struct spi_device *spi,
+				     struct ads7846 *ts)
+{
+	if (ts->hwmon) {
+		sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+		hwmon_device_unregister(ts->hwmon);
+	}
+}
+
+#else
+static inline int ads784x_hwmon_register(struct spi_device *spi,
+					 struct ads7846 *ts)
+{
+	return 0;
+}
+
+static inline void ads784x_hwmon_unregister(struct spi_device *spi,
+					    struct ads7846 *ts)
+{
+}
+#endif
 
 static int is_pen_down(struct device *dev)
 {
-	struct ads7846		*ts = dev_get_drvdata(dev);
+	struct ads7846	*ts = dev_get_drvdata(dev);
 
 	return ts->pendown;
 }
@@ -318,46 +486,14 @@
 
 static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
 
-static struct attribute *ads7846_attributes[] = {
-	&dev_attr_temp0.attr,
-	&dev_attr_temp1.attr,
-	&dev_attr_vbatt.attr,
-	&dev_attr_vaux.attr,
-	&dev_attr_pen_down.attr,
-	&dev_attr_disable.attr,
-	NULL,
-};
-
-static struct attribute_group ads7846_attr_group = {
-	.attrs = ads7846_attributes,
-};
-
-/*
- * ads7843/7845 don't have temperature sensors, and
- * use the other sensors a bit differently too
- */
-
-static struct attribute *ads7843_attributes[] = {
-	&dev_attr_vbatt.attr,
-	&dev_attr_vaux.attr,
+static struct attribute *ads784x_attributes[] = {
 	&dev_attr_pen_down.attr,
 	&dev_attr_disable.attr,
 	NULL,
 };
 
-static struct attribute_group ads7843_attr_group = {
-	.attrs = ads7843_attributes,
-};
-
-static struct attribute *ads7845_attributes[] = {
-	&dev_attr_vaux.attr,
-	&dev_attr_pen_down.attr,
-	&dev_attr_disable.attr,
-	NULL,
-};
-
-static struct attribute_group ads7845_attr_group = {
-	.attrs = ads7845_attributes,
+static struct attribute_group ads784x_attr_group = {
+	.attrs = ads784x_attributes,
 };
 
 /*--------------------------------------------------------------------------*/
@@ -373,25 +509,22 @@
 static void ads7846_rx(void *ads)
 {
 	struct ads7846		*ts = ads;
-	struct input_dev	*input_dev = ts->input;
 	unsigned		Rt;
-	unsigned		sync = 0;
 	u16			x, y, z1, z2;
-	unsigned long		flags;
 
-	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
-	 * built from two 8 bit values written msb-first.
+	/* ads7846_rx_val() did in-place conversion (including byteswap) from
+	 * on-the-wire format as part of debouncing to get stable readings.
 	 */
-	x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
-	y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
-	z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
-	z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
+	x = ts->tc.x;
+	y = ts->tc.y;
+	z1 = ts->tc.z1;
+	z2 = ts->tc.z2;
 
 	/* range filtering */
 	if (x == MAX_12BIT)
 		x = 0;
 
-	if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
+	if (likely(x && z1)) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
 		Rt -= z1;
@@ -402,101 +535,134 @@
 	} else
 		Rt = 0;
 
+	if (ts->model == 7843)
+		Rt = ts->pressure_max / 2;
+
+
 	/* Sample found inconsistent by debouncing or pressure is beyond
-	* the maximum. Don't report it to user space, repeat at least
-	* once more the measurement */
+	 * the maximum. Don't report it to user space, repeat at least
+	 * once more the measurement
+	 */
 	if (ts->tc.ignore || Rt > ts->pressure_max) {
-		mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+#ifdef VERBOSE
+		pr_debug("%s: ignored %d pressure %d\n",
+			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
+#endif
+		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+			      HRTIMER_REL);
 		return;
 	}
 
-	/* NOTE:  "pendown" is inferred from pressure; we don't rely on
-	 * being able to check nPENIRQ status, or "friendly" trigger modes
-	 * (both-edges is much better than just-falling or low-level).
-	 *
-	 * REVISIT:  some boards may require reading nPENIRQ; it's
-	 * needed on 7843.  and 7845 reads pressure differently...
+	/* NOTE: We can't rely on the pressure to determine the pen down
+	 * state, even this controller has a pressure sensor.  The pressure
+	 * value can fluctuate for quite a while after lifting the pen and
+	 * in some cases may not even settle at the expected value.
 	 *
-	 * REVISIT:  the touchscreen might not be connected; this code
-	 * won't notice that, even if nPENIRQ never fires ...
+	 * The only safe way to check for the pen up condition is in the
+	 * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
 	 */
-	if (!ts->pendown && Rt != 0) {
-		input_report_key(input_dev, BTN_TOUCH, 1);
-		sync = 1;
-	} else if (ts->pendown && Rt == 0) {
-		input_report_key(input_dev, BTN_TOUCH, 0);
-		sync = 1;
-	}
-
 	if (Rt) {
-		input_report_abs(input_dev, ABS_X, x);
-		input_report_abs(input_dev, ABS_Y, y);
-		sync = 1;
-	}
+		struct input_dev *input = ts->input;
 
-	if (sync) {
-		input_report_abs(input_dev, ABS_PRESSURE, Rt);
-		input_sync(input_dev);
-	}
-
-#ifdef	VERBOSE
-	if (Rt || ts->pendown)
-		pr_debug("%s: %d/%d/%d%s\n", ts->spi->dev.bus_id,
-			x, y, Rt, Rt ? "" : " UP");
+		if (!ts->pendown) {
+			input_report_key(input, BTN_TOUCH, 1);
+			ts->pendown = 1;
+#ifdef VERBOSE
+			dev_dbg(&ts->spi->dev, "DOWN\n");
 #endif
+		}
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+		input_report_abs(input, ABS_PRESSURE, Rt);
+
+		input_sync(input);
+#ifdef VERBOSE
+		dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
+#endif
+	}
 
-	spin_lock_irqsave(&ts->lock, flags);
-
-	ts->pendown = (Rt != 0);
-	mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-
-	spin_unlock_irqrestore(&ts->lock, flags);
+	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
 }
 
-static void ads7846_debounce(void *ads)
+static int ads7846_debounce(void *ads, int data_idx, int *val)
 {
 	struct ads7846		*ts = ads;
-	struct spi_message	*m;
-	struct spi_transfer	*t;
-	int			val;
-	int			status;
 
-	m = &ts->msg[ts->msg_idx];
-	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-	val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
-	if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
+	if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
 		/* Repeat it, if this was the first read or the read
 		 * wasn't consistent enough. */
 		if (ts->read_cnt < ts->debounce_max) {
-			ts->last_read = val;
+			ts->last_read = *val;
 			ts->read_cnt++;
+			return ADS7846_FILTER_REPEAT;
 		} else {
 			/* Maximum number of debouncing reached and still
 			 * not enough number of consistent readings. Abort
 			 * the whole sample, repeat it in the next sampling
 			 * period.
 			 */
-			ts->tc.ignore = 1;
 			ts->read_cnt = 0;
-			/* Last message will contain ads7846_rx() as the
-			 * completion function.
-			 */
-			m = ts->last_msg;
+			return ADS7846_FILTER_IGNORE;
 		}
-		/* Start over collecting consistent readings. */
-		ts->read_rep = 0;
 	} else {
 		if (++ts->read_rep > ts->debounce_rep) {
 			/* Got a good reading for this coordinate,
 			 * go for the next one. */
-			ts->tc.ignore = 0;
-			ts->msg_idx++;
 			ts->read_cnt = 0;
 			ts->read_rep = 0;
-			m++;
-		} else
+			return ADS7846_FILTER_OK;
+		} else {
 			/* Read more values that are consistent. */
 			ts->read_cnt++;
+			return ADS7846_FILTER_REPEAT;
+		}
+	}
+}
+
+static int ads7846_no_filter(void *ads, int data_idx, int *val)
+{
+	return ADS7846_FILTER_OK;
+}
+
+static void ads7846_rx_val(void *ads)
+{
+	struct ads7846 *ts = ads;
+	struct spi_message *m;
+	struct spi_transfer *t;
+	u16 *rx_val;
+	int val;
+	int action;
+	int status;
+
+	m = &ts->msg[ts->msg_idx];
+	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+	rx_val = t->rx_buf;
+
+	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
+	 * built from two 8 bit values written msb-first.
+	 */
+	val = be16_to_cpu(*rx_val) >> 3;
+
+	action = ts->filter(ts->filter_data, ts->msg_idx, &val);
+	switch (action) {
+	case ADS7846_FILTER_REPEAT:
+		break;
+	case ADS7846_FILTER_IGNORE:
+		ts->tc.ignore = 1;
+		/* Last message will contain ads7846_rx() as the
+		 * completion function.
+		 */
+		m = ts->last_msg;
+		break;
+	case ADS7846_FILTER_OK:
+		*rx_val = val;
+		ts->tc.ignore = 0;
+		m = &ts->msg[++ts->msg_idx];
+		break;
+	default:
+		BUG();
 	}
 	status = spi_async(ts->spi, m);
 	if (status)
@@ -504,21 +670,34 @@
 				status);
 }
 
-static void ads7846_timer(unsigned long handle)
+static int ads7846_timer(struct hrtimer *handle)
 {
-	struct ads7846	*ts = (void *)handle;
+	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;
 
 	spin_lock_irq(&ts->lock);
 
-	if (unlikely(ts->msg_idx && !ts->pendown)) {
+	if (unlikely(!ts->get_pendown_state() ||
+		     device_suspended(&ts->spi->dev))) {
+		if (ts->pendown) {
+			struct input_dev *input = ts->input;
+
+			input_report_key(input, BTN_TOUCH, 0);
+			input_report_abs(input, ABS_PRESSURE, 0);
+			input_sync(input);
+
+			ts->pendown = 0;
+#ifdef VERBOSE
+			dev_dbg(&ts->spi->dev, "UP\n");
+#endif
+		}
+
 		/* measurement cycle ended */
 		if (!device_suspended(&ts->spi->dev)) {
 			ts->irq_disabled = 0;
 			enable_irq(ts->spi->irq);
 		}
 		ts->pending = 0;
-		ts->msg_idx = 0;
 	} else {
 		/* pen is still down, continue with the measurement */
 		ts->msg_idx = 0;
@@ -528,6 +707,7 @@
 	}
 
 	spin_unlock_irq(&ts->lock);
+	return HRTIMER_NORESTART;
 }
 
 static irqreturn_t ads7846_irq(int irq, void *handle)
@@ -546,7 +726,8 @@
 			ts->irq_disabled = 1;
 			disable_irq(ts->spi->irq);
 			ts->pending = 1;
-			mod_timer(&ts->timer, jiffies);
+			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
+					HRTIMER_REL);
 		}
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);
@@ -632,6 +813,7 @@
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
 	struct spi_message		*m;
 	struct spi_transfer		*x;
+	int				vref;
 	int				err;
 
 	if (!spi->irq) {
@@ -665,6 +847,10 @@
 	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
 	 */
 	spi->bits_per_word = 8;
+	spi->mode = SPI_MODE_1;
+	err = spi_setup(spi);
+	if (err < 0)
+		return err;
 
 	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -679,8 +865,7 @@
 	ts->spi = spi;
 	ts->input = input_dev;
 
-	init_timer(&ts->timer);
-	ts->timer.data = (unsigned long) ts;
+	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
 	ts->timer.function = ads7846_timer;
 
 	spin_lock_init(&ts->lock);
@@ -689,14 +874,25 @@
 	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
 	ts->pressure_max = pdata->pressure_max ? : ~0;
-	if (pdata->debounce_max) {
+
+	if (pdata->filter != NULL) {
+		if (pdata->filter_init != NULL) {
+			err = pdata->filter_init(pdata, &ts->filter_data);
+			if (err < 0)
+				goto err_free_mem;
+		}
+		ts->filter = pdata->filter;
+		ts->filter_cleanup = pdata->filter_cleanup;
+	} else if (pdata->debounce_max) {
 		ts->debounce_max = pdata->debounce_max;
+		if (ts->debounce_max < 2)
+			ts->debounce_max = 2;
 		ts->debounce_tol = pdata->debounce_tol;
 		ts->debounce_rep = pdata->debounce_rep;
-		if (ts->debounce_rep > ts->debounce_max + 1)
-			ts->debounce_rep = ts->debounce_max - 1;
+		ts->filter = ads7846_debounce;
+		ts->filter_data = ts;
 	} else
-		ts->debounce_tol = ~0;
+		ts->filter = ads7846_no_filter;
 	ts->get_pendown_state = pdata->get_pendown_state;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
@@ -718,6 +914,8 @@
 	input_set_abs_params(input_dev, ABS_PRESSURE,
 			pdata->pressure_min, pdata->pressure_max, 0, 0);
 
+	vref = pdata->keep_vref_on;
+
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
@@ -727,7 +925,7 @@
 	spi_message_init(m);
 
 	/* y- still on; turn on only y+ (and ADC) */
-	ts->read_y = READ_Y;
+	ts->read_y = READ_Y(vref);
 	x->tx_buf = &ts->read_y;
 	x->len = 1;
 	spi_message_add_tail(x, m);
@@ -737,7 +935,7 @@
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
-	m->complete = ads7846_debounce;
+	m->complete = ads7846_rx_val;
 	m->context = ts;
 
 	m++;
@@ -745,7 +943,7 @@
 
 	/* turn y- off, x+ on, then leave in lowpower */
 	x++;
-	ts->read_x = READ_X;
+	ts->read_x = READ_X(vref);
 	x->tx_buf = &ts->read_x;
 	x->len = 1;
 	spi_message_add_tail(x, m);
@@ -755,7 +953,7 @@
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
-	m->complete = ads7846_debounce;
+	m->complete = ads7846_rx_val;
 	m->context = ts;
 
 	/* turn y+ off, x- on; we'll use formula #2 */
@@ -764,7 +962,7 @@
 		spi_message_init(m);
 
 		x++;
-		ts->read_z1 = READ_Z1;
+		ts->read_z1 = READ_Z1(vref);
 		x->tx_buf = &ts->read_z1;
 		x->len = 1;
 		spi_message_add_tail(x, m);
@@ -774,14 +972,14 @@
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
-		m->complete = ads7846_debounce;
+		m->complete = ads7846_rx_val;
 		m->context = ts;
 
 		m++;
 		spi_message_init(m);
 
 		x++;
-		ts->read_z2 = READ_Z2;
+		ts->read_z2 = READ_Z2(vref);
 		x->tx_buf = &ts->read_z2;
 		x->len = 1;
 		spi_message_add_tail(x, m);
@@ -791,7 +989,7 @@
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
-		m->complete = ads7846_debounce;
+		m->complete = ads7846_rx_val;
 		m->context = ts;
 	}
 
@@ -820,31 +1018,24 @@
 			spi->dev.driver->name, ts)) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		err = -EBUSY;
-		goto err_free_mem;
+		goto err_cleanup_filter;
 	}
 
+	err = ads784x_hwmon_register(spi, ts);
+	if (err)
+		goto err_free_irq;
+
 	dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
 
-	/* take a first sample, leaving nPENIRQ active; avoid
+	/* take a first sample, leaving nPENIRQ active and vREF off; avoid
 	 * the touchscreen, in case it's not connected.
 	 */
 	(void) ads7846_read12_ser(&spi->dev,
 			  READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
 
-	switch (ts->model) {
-	case 7846:
-		ts->attr_group = &ads7846_attr_group;
-		break;
-	case 7845:
-		ts->attr_group = &ads7845_attr_group;
-		break;
-	default:
-		ts->attr_group = &ads7843_attr_group;
-		break;
-	}
-	err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
+	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
 	if (err)
-		goto err_free_irq;
+		goto err_remove_hwmon;
 
 	err = input_register_device(input_dev);
 	if (err)
@@ -853,9 +1044,14 @@
 	return 0;
 
  err_remove_attr_group:
-	sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
+ err_remove_hwmon:
+	ads784x_hwmon_unregister(spi, ts);
  err_free_irq:
 	free_irq(spi->irq, ts);
+ err_cleanup_filter:
+	if (ts->filter_cleanup)
+		ts->filter_cleanup(ts->filter_data);
  err_free_mem:
 	input_free_device(input_dev);
 	kfree(ts);
@@ -866,16 +1062,20 @@
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	ads784x_hwmon_unregister(spi, ts);
 	input_unregister_device(ts->input);
 
 	ads7846_suspend(spi, PMSG_SUSPEND);
 
-	sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
 
 	free_irq(ts->spi->irq, ts);
 	/* suspend left the IRQ disabled */
 	enable_irq(ts->spi->irq);
 
+	if (ts->filter_cleanup)
+		ts->filter_cleanup(ts->filter_data);
+
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff -urN linux-2.6.20.4-0rig/drivers/leds/Kconfig linux-2.6.20.4-atmel/drivers/leds/Kconfig
--- linux-2.6.20.4-0rig/drivers/leds/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/leds/Kconfig	2007-03-24 16:39:15.000000000 +0100
@@ -76,6 +76,13 @@
 	  This option enables support for the Soekris net4801 and net4826 error
 	  LED.
 
+config LEDS_AT91
+	tristate "LED support using AT91 GPIOs"
+	depends on LEDS_CLASS && ARCH_AT91 && !LEDS
+	help
+	  This option enables support for LEDs connected to GPIO lines
+	  on AT91-based boards.
+
 config LEDS_WRAP
 	tristate "LED Support for the WRAP series LEDs"
 	depends on LEDS_CLASS && SCx200_GPIO
diff -urN linux-2.6.20.4-0rig/drivers/leds/leds-at91.c linux-2.6.20.4-atmel/drivers/leds/leds-at91.c
--- linux-2.6.20.4-0rig/drivers/leds/leds-at91.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/leds/leds-at91.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,140 @@
+/*
+ * AT91 GPIO based LED driver
+ *
+ * Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+static LIST_HEAD(at91_led_list);	/* list of AT91 LEDs */
+
+struct at91_led {
+	struct led_classdev	cdev;
+	struct list_head	list;
+	struct at91_gpio_led	*led_data;
+};
+
+/*
+ * Change the state of the LED.
+ */
+static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
+{
+	struct at91_led	*led = container_of(cdev, struct at91_led, cdev);
+	short		active = (value == LED_OFF);
+
+	if (led->led_data->flags & 1)	/* active high/low? */
+		active = !active;
+	at91_set_gpio_value(led->led_data->gpio, value == LED_OFF);
+}
+
+static int __devexit at91_led_remove(struct platform_device *pdev)
+{
+	struct at91_led		*led;
+
+	list_for_each_entry (led, &at91_led_list, list)
+		led_classdev_unregister(&led->cdev);
+
+#warning "Free allocated memory"
+	// TODO: Free memory.	kfree(led);
+
+	return 0;
+}
+
+static int __init at91_led_probe(struct platform_device *pdev)
+{
+	int			status = 0;
+	struct at91_gpio_led	*pdata = pdev->dev.platform_data;
+	unsigned		nr_leds;
+	struct at91_led		*led;
+
+	if (!pdata)
+		return -ENODEV;
+
+	nr_leds = pdata->index;		/* first index stores number of LEDs */
+
+	while (nr_leds--) {
+		led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
+		if (!led) {
+			dev_err(&pdev->dev, "No memory for device\n");
+			status = -ENOMEM;
+			goto cleanup;
+		}
+		led->led_data = pdata;
+		led->cdev.name = pdata->name;
+		led->cdev.brightness_set = at91_led_set,
+		led->cdev.default_trigger = pdata->trigger;
+
+		status = led_classdev_register(&pdev->dev, &led->cdev);
+		if (status < 0) {
+			dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
+cleanup:
+			at91_led_remove(pdev);
+			break;
+		}
+		list_add(&led->list, &at91_led_list);
+		pdata++;
+	}
+	return status;
+}
+
+#ifdef CONFIG_PM
+static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct at91_led	*led;
+
+	list_for_each_entry (led, &at91_led_list, list)
+		led_classdev_suspend(&led->cdev);
+
+	return 0;
+}
+
+static int at91_led_resume(struct platform_device *dev)
+{
+	struct at91_led	*led;
+
+	list_for_each_entry (led, &at91_led_list, list)
+		led_classdev_resume(&led->cdev);
+
+	return 0;
+}
+#else
+#define	at91_led_suspend	NULL
+#define	at91_led_resume		NULL
+#endif
+
+static struct platform_driver at91_led_driver = {
+	.probe		= at91_led_probe,
+	.remove		= __devexit_p(at91_led_remove),
+	.suspend	= at91_led_suspend,
+	.resume		= at91_led_resume,
+	.driver		= {
+		.name	= "at91_leds",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at91_led_init(void)
+{
+	return platform_driver_register(&at91_led_driver);
+}
+module_init(at91_led_init);
+
+static void __exit at91_led_exit(void)
+{
+	platform_driver_unregister(&at91_led_driver);
+}
+module_exit(at91_led_exit);
+
+MODULE_DESCRIPTION("AT91 GPIO LED driver");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/leds/Makefile linux-2.6.20.4-atmel/drivers/leds/Makefile
--- linux-2.6.20.4-0rig/drivers/leds/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/leds/Makefile	2007-03-24 16:39:15.000000000 +0100
@@ -14,6 +14,7 @@
 obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
 obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
 obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
+obj-$(CONFIG_LEDS_AT91)			+= leds-at91.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff -urN linux-2.6.20.4-0rig/drivers/mmc/at91_mci.c linux-2.6.20.4-atmel/drivers/mmc/at91_mci.c
--- linux-2.6.20.4-0rig/drivers/mmc/at91_mci.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mmc/at91_mci.c	2007-03-24 16:39:15.000000000 +0100
@@ -64,6 +64,7 @@
 #include <linux/err.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/atmel_pdc.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
@@ -75,7 +76,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91_mci.h>
-#include <asm/arch/at91_pdc.h>
+
 
 #define DRIVER_NAME "at91_mci"
 
@@ -85,8 +86,8 @@
 #define FL_SENT_STOP	(1 << 1)
 
 #define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
-		| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE		\
-		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)			
+			| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE	\
+			| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
 
 #define at91_mci_read(host, reg)	__raw_readl((host)->baseaddr + (reg))
 #define at91_mci_write(host, reg, val)	__raw_writel((val), (host)->baseaddr + (reg))
@@ -211,13 +212,13 @@
 
 		/* Check to see if this needs filling */
 		if (i == 0) {
-			if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
+			if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
 				pr_debug("Transfer active in current\n");
 				continue;
 			}
 		}
 		else {
-			if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
+			if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
 				pr_debug("Transfer active in next\n");
 				continue;
 			}
@@ -234,12 +235,12 @@
 		pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
 
 		if (i == 0) {
-			at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
-			at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
+			at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
+			at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
 		}
 		else {
-			at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
-			at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
+			at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
+			at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
 		}
 	}
 
@@ -303,37 +304,12 @@
 		at91mci_pre_dma_read(host);
 	else {
 		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-		at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 	}
 
 	pr_debug("post dma read done\n");
 }
 
-/*
- * Handle transmitted data
- */
-static void at91_mci_handle_transmitted(struct at91mci_host *host)
-{
-	struct mmc_command *cmd;
-	struct mmc_data *data;
-
-	pr_debug("Handling the transmit\n");
-
-	/* Disable the transfer */
-	at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
-
-	/* Now wait for cmd ready */
-	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-
-	cmd = host->cmd;
-	if (!cmd) return;
-
-	data = cmd->data;
-	if (!data) return;
-
-	data->bytes_xfered = host->total_length;
-}
 
 /*
  * Enable the controller
@@ -431,15 +407,15 @@
 		cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
 
 	if (!data) {
-		at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
-		at91_mci_write(host, AT91_PDC_RPR, 0);
-		at91_mci_write(host, AT91_PDC_RCR, 0);
-		at91_mci_write(host, AT91_PDC_RNPR, 0);
-		at91_mci_write(host, AT91_PDC_RNCR, 0);
-		at91_mci_write(host, AT91_PDC_TPR, 0);
-		at91_mci_write(host, AT91_PDC_TCR, 0);
-		at91_mci_write(host, AT91_PDC_TNPR, 0);
-		at91_mci_write(host, AT91_PDC_TNCR, 0);
+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
+		at91_mci_write(host, ATMEL_PDC_RPR, 0);
+		at91_mci_write(host, ATMEL_PDC_RCR, 0);
+		at91_mci_write(host, ATMEL_PDC_RNPR, 0);
+		at91_mci_write(host, ATMEL_PDC_RNCR, 0);
+		at91_mci_write(host, ATMEL_PDC_TPR, 0);
+		at91_mci_write(host, ATMEL_PDC_TCR, 0);
+		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
+		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
 
 		at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
 		at91_mci_write(host, AT91_MCI_CMDR, cmdr);
@@ -452,7 +428,7 @@
 	/*
 	 * Disable the PDC controller
 	 */
-	at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 
 	if (cmdr & AT91_MCI_TRCMD_START) {
 		data->bytes_xfered = 0;
@@ -474,15 +450,15 @@
 			 */
 			host->total_length = block_length * blocks;
 			host->buffer = dma_alloc_coherent(NULL,
-						  host->total_length,
-						  &host->physical_address, GFP_KERNEL);
+						host->total_length,
+						&host->physical_address, GFP_KERNEL);
 
 			at91mci_sg_to_dma(host, data);
 
 			pr_debug("Transmitting %d bytes\n", host->total_length);
 
-			at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
-			at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
+			at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
+			at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
 			ier = AT91_MCI_TXBUFE;
 		}
 	}
@@ -497,9 +473,9 @@
 
 	if (cmdr & AT91_MCI_TRCMD_START) {
 		if (cmdr & AT91_MCI_TRDIR)
-			at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
+			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
 		else
-			at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
+			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
 	}
 	return ier;
 }
@@ -561,9 +537,7 @@
 	pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
 		 status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
 
-	if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
-			AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
-			AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
+	if (status & AT91_MCI_ERRORS) {
 		if ((status & AT91_MCI_RCRCE) &&
 			((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
 			cmd->error = MMC_ERR_NONE;
@@ -601,6 +575,32 @@
 }
 
 /*
+ * Handle transmitted data
+ */
+static void at91_mci_handle_transmitted(struct at91mci_host *host)
+{
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+
+	pr_debug("Handling the transmit\n");
+
+	/* Disable the transfer */
+	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+
+	/* Now wait for cmd ready */
+	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
+	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+
+	cmd = host->cmd;
+	if (!cmd) return;
+
+	data = cmd->data;
+	if (!data) return;
+
+	data->bytes_xfered = host->total_length;
+}
+
+/*
  * Set the IOS
  */
 static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -665,15 +665,15 @@
 
 	int_status = at91_mci_read(host, AT91_MCI_SR);
 	int_mask = at91_mci_read(host, AT91_MCI_IMR);
-	
+
 	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
 		int_status & int_mask);
-	
+
 	int_status = int_status & int_mask;
 
 	if (int_status & AT91_MCI_ERRORS) {
 		completed = 1;
-		
+
 		if (int_status & AT91_MCI_UNRE)
 			pr_debug("MMC: Underrun error\n");
 		if (int_status & AT91_MCI_OVRE)
@@ -821,7 +821,7 @@
 	mmc->f_min = 375000;
 	mmc->f_max = 25000000;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->caps = MMC_CAP_BYTEBLOCK;
+	mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
 
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
@@ -853,15 +853,15 @@
 	host->baseaddr = ioremap(res->start, res->end - res->start + 1);
 	if (!host->baseaddr) {
 		clk_put(host->mci_clk);
-		mmc_free_host(mmc);
 		release_mem_region(res->start, res->end - res->start + 1);
+		mmc_free_host(mmc);
 		return -ENOMEM;
 	}
 
 	/*
 	 * Reset hardware
 	 */
-	clk_enable(host->mci_clk);		/* Enable the peripheral clock */
+	clk_enable(host->mci_clk);	/* Enable the peripheral clock */
 	at91_mci_disable(host);
 	at91_mci_enable(host);
 
@@ -874,9 +874,9 @@
 		printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
 		clk_disable(host->mci_clk);
 		clk_put(host->mci_clk);
-		mmc_free_host(mmc);
 		iounmap(host->baseaddr);
 		release_mem_region(res->start, res->end - res->start + 1);
+		mmc_free_host(mmc);
 		return ret;
 	}
 
@@ -930,13 +930,13 @@
 	mmc_remove_host(mmc);
 	free_irq(host->irq, host);
 
-	clk_disable(host->mci_clk);			/* Disable the peripheral clock */
-	clk_put(host->mci_clk);
-
 	iounmap(host->baseaddr);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, res->end - res->start + 1);
 
+	clk_disable(host->mci_clk);			/* Disable the peripheral clock */
+	clk_put(host->mci_clk);
+
 	mmc_free_host(mmc);
 	platform_set_drvdata(pdev, NULL);
 	pr_debug("MCI Removed\n");
diff -urN linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.c linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.c
--- linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,1218 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/protocol.h>
+
+#include <asm/dma-controller.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "atmel-mci.h"
+
+#define DRIVER_NAME "atmel_mci"
+
+#define MCI_CMD_ERROR_FLAGS	(MCI_BIT(RINDE)	| MCI_BIT(RDIRE) |	\
+				 MCI_BIT(RCRCE) | MCI_BIT(RENDE) |	\
+				 MCI_BIT(RTOE))
+#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
+				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
+
+enum {
+	EVENT_CMD_COMPLETE = 0,
+	EVENT_CMD_ERROR,
+	EVENT_DATA_COMPLETE,
+	EVENT_DATA_ERROR,
+	EVENT_STOP_SENT,
+	EVENT_STOP_COMPLETE,
+	EVENT_STOP_ERROR,
+	EVENT_DMA_ERROR,
+	EVENT_CARD_DETECT,
+};
+
+struct atmel_mci_dma {
+	struct dma_request_sg	req;
+	unsigned short		rx_periph_id;
+	unsigned short		tx_periph_id;
+};
+
+struct atmel_mci {
+	struct mmc_host		*mmc;
+	void __iomem		*regs;
+	struct atmel_mci_dma	dma;
+
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	u32			stop_cmdr;
+	u32			stop_iflags;
+
+	struct tasklet_struct	tasklet;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+	u32			error_status;
+
+	int			present;
+	int			detect_pin;
+	int			wp_pin;
+
+	unsigned long		bus_hz;
+	unsigned long		mapbase;
+	struct clk		*mck;
+	struct platform_device	*pdev;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry		*debugfs_root;
+	struct dentry		*debugfs_regs;
+	struct dentry		*debugfs_req;
+	struct dentry		*debugfs_pending_events;
+	struct dentry		*debugfs_completed_events;
+#endif
+};
+
+/* Those printks take an awful lot of time... */
+#ifndef DEBUG
+static unsigned int fmax = 15000000U;
+#else
+static unsigned int fmax = 1000000U;
+#endif
+module_param(fmax, uint, 0444);
+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+
+/* Test bit macros for completed events */
+#define mci_cmd_is_complete(host)			\
+	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
+#define mci_cmd_error_is_complete(host)			\
+	test_bit(EVENT_CMD_ERROR, &host->completed_events)
+#define mci_data_is_complete(host)			\
+	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
+#define mci_data_error_is_complete(host)		\
+	test_bit(EVENT_DATA_ERROR, &host->completed_events)
+#define mci_stop_sent_is_complete(host)			\
+	test_bit(EVENT_STOP_SENT, &host->completed_events)
+#define mci_stop_is_complete(host)			\
+	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+#define mci_stop_error_is_complete(host)		\
+	test_bit(EVENT_STOP_ERROR, &host->completed_events)
+#define mci_dma_error_is_complete(host)			\
+	test_bit(EVENT_DMA_ERROR, &host->completed_events)
+#define mci_card_detect_is_complete(host)			\
+	test_bit(EVENT_CARD_DETECT, &host->completed_events)
+
+/* Test and clear bit macros for pending events */
+#define mci_clear_cmd_is_pending(host)			\
+	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
+#define mci_clear_cmd_error_is_pending(host)		\
+	test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
+#define mci_clear_data_is_pending(host)			\
+	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
+#define mci_clear_data_error_is_pending(host)		\
+	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
+#define mci_clear_stop_sent_is_pending(host)		\
+	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
+#define mci_clear_stop_is_pending(host)			\
+	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+#define mci_clear_stop_error_is_pending(host)		\
+	test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
+#define mci_clear_dma_error_is_pending(host)		\
+	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+#define mci_clear_card_detect_is_pending(host)		\
+	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+
+/* Test and set bit macros for completed events */
+#define mci_set_cmd_is_completed(host)			\
+	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
+#define mci_set_cmd_error_is_completed(host)		\
+	test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
+#define mci_set_data_is_completed(host)			\
+	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
+#define mci_set_data_error_is_completed(host)		\
+	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
+#define mci_set_stop_sent_is_completed(host)		\
+	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
+#define mci_set_stop_is_completed(host)			\
+	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+#define mci_set_stop_error_is_completed(host)		\
+	test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
+#define mci_set_dma_error_is_completed(host)		\
+	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
+#define mci_set_card_detect_is_completed(host)		\
+	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
+/* Set bit macros for completed events */
+#define mci_set_cmd_complete(host)			\
+	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
+#define mci_set_cmd_error_complete(host)		\
+	set_bit(EVENT_CMD_ERROR, &host->completed_events)
+#define mci_set_data_complete(host)			\
+	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
+#define mci_set_data_error_complete(host)		\
+	set_bit(EVENT_DATA_ERROR, &host->completed_events)
+#define mci_set_stop_sent_complete(host)		\
+	set_bit(EVENT_STOP_SENT, &host->completed_events)
+#define mci_set_stop_complete(host)			\
+	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+#define mci_set_stop_error_complete(host)		\
+	set_bit(EVENT_STOP_ERROR, &host->completed_events)
+#define mci_set_dma_error_complete(host)		\
+	set_bit(EVENT_DMA_ERROR, &host->completed_events)
+#define mci_set_card_detect_complete(host)		\
+	set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
+/* Set bit macros for pending events */
+#define mci_set_cmd_pending(host)			\
+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
+#define mci_set_cmd_error_pending(host)			\
+	set_bit(EVENT_CMD_ERROR, &host->pending_events)
+#define mci_set_data_pending(host)			\
+	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
+#define mci_set_data_error_pending(host)		\
+	set_bit(EVENT_DATA_ERROR, &host->pending_events)
+#define mci_set_stop_sent_pending(host)			\
+	set_bit(EVENT_STOP_SENT, &host->pending_events)
+#define mci_set_stop_pending(host)			\
+	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+#define mci_set_stop_error_pending(host)		\
+	set_bit(EVENT_STOP_ERROR, &host->pending_events)
+#define mci_set_dma_error_pending(host)			\
+	set_bit(EVENT_DMA_ERROR, &host->pending_events)
+#define mci_set_card_detect_pending(host)		\
+	set_bit(EVENT_CARD_DETECT, &host->pending_events)
+
+/* Clear bit macros for pending events */
+#define mci_clear_cmd_pending(host)			\
+	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
+#define mci_clear_cmd_error_pending(host)		\
+	clear_bit(EVENT_CMD_ERROR, &host->pending_events)
+#define mci_clear_data_pending(host)			\
+	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
+#define mci_clear_data_error_pending(host)		\
+	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
+#define mci_clear_stop_sent_pending(host)		\
+	clear_bit(EVENT_STOP_SENT, &host->pending_events)
+#define mci_clear_stop_pending(host)			\
+	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+#define mci_clear_stop_error_pending(host)		\
+	clear_bit(EVENT_STOP_ERROR, &host->pending_events)
+#define mci_clear_dma_error_pending(host)		\
+	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+#define mci_clear_card_detect_pending(host)		\
+	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+
+#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
+
+struct req_dbg_data {
+	unsigned int nbytes;
+	char str[DBG_REQ_BUF_SIZE];
+};
+
+static int req_dbg_open(struct inode *inode, struct file *file)
+{
+	struct atmel_mci *host;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd, *stop;
+	struct mmc_data *data;
+	struct req_dbg_data *priv;
+	char *str;
+	unsigned long n = 0;
+
+	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	str = priv->str;
+
+	mutex_lock(&inode->i_mutex);
+	host = inode->i_private;
+
+	spin_lock_irq(&host->mmc->lock);
+	mrq = host->mrq;
+	if (mrq) {
+		cmd = mrq->cmd;
+		data = mrq->data;
+		stop = mrq->stop;
+		n = snprintf(str, DBG_REQ_BUF_SIZE,
+			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
+			     cmd->opcode, cmd->arg, cmd->flags,
+			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
+			     cmd->resp[3], cmd->error);
+		if (n < DBG_REQ_BUF_SIZE && data)
+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
+				      "DATA %u * %u (%u) %x (err %u)\n",
+				      data->blocks, data->blksz,
+				      data->bytes_xfered, data->flags,
+				      data->error);
+		if (n < DBG_REQ_BUF_SIZE && stop)
+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
+				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
+				      stop->opcode, stop->arg, stop->flags,
+				      stop->resp[0], stop->resp[1],
+				      stop->resp[2], stop->resp[3],
+				      stop->error);
+	}
+	spin_unlock_irq(&host->mmc->lock);
+	mutex_unlock(&inode->i_mutex);
+
+	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
+	file->private_data = priv;
+
+	return 0;
+}
+
+static ssize_t req_dbg_read(struct file *file, char __user *buf,
+			    size_t nbytes, loff_t *ppos)
+{
+	struct req_dbg_data *priv = file->private_data;
+
+	return simple_read_from_buffer(buf, nbytes, ppos,
+				       priv->str, priv->nbytes);
+}
+
+static int req_dbg_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static const struct file_operations req_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= req_dbg_open,
+	.llseek		= no_llseek,
+	.read		= req_dbg_read,
+	.release	= req_dbg_release,
+};
+
+static int regs_dbg_open(struct inode *inode, struct file *file)
+{
+	struct atmel_mci *host;
+	unsigned int i;
+	u32 *data;
+	int ret = -ENOMEM;
+
+	mutex_lock(&inode->i_mutex);
+	host = inode->i_private;
+	data = kmalloc(inode->i_size, GFP_KERNEL);
+	if (!data)
+		goto out;
+
+	spin_lock_irq(&host->mmc->lock);
+	for (i = 0; i < inode->i_size / 4; i++)
+		data[i] = __raw_readl(host->regs + i * 4);
+	spin_unlock_irq(&host->mmc->lock);
+
+	file->private_data = data;
+	ret = 0;
+
+out:
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
+
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
+			     size_t nbytes, loff_t *ppos)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	int ret;
+
+	mutex_lock(&inode->i_mutex);
+	ret = simple_read_from_buffer(buf, nbytes, ppos,
+				      file->private_data,
+				      file->f_dentry->d_inode->i_size);
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
+
+static int regs_dbg_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static const struct file_operations regs_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= regs_dbg_open,
+	.llseek		= generic_file_llseek,
+	.read		= regs_dbg_read,
+	.release	= regs_dbg_release,
+};
+
+static void atmci_init_debugfs(struct atmel_mci *host)
+{
+	struct mmc_host *mmc;
+	struct dentry *root, *regs;
+	struct resource *res;
+
+	mmc = host->mmc;
+	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
+	if (IS_ERR(root) || !root)
+		goto err_root;
+	host->debugfs_root = root;
+
+	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
+	if (!regs)
+		goto err_regs;
+
+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+	regs->d_inode->i_size = res->end - res->start + 1;
+	host->debugfs_regs = regs;
+
+	host->debugfs_req = debugfs_create_file("req", 0400, root,
+						host, &req_dbg_fops);
+	if (!host->debugfs_req)
+		goto err_req;
+
+	host->debugfs_pending_events
+		= debugfs_create_u32("pending_events", 0400, root,
+				     (u32 *)&host->pending_events);
+	if (!host->debugfs_pending_events)
+		goto err_pending_events;
+
+	host->debugfs_completed_events
+		= debugfs_create_u32("completed_events", 0400, root,
+				     (u32 *)&host->completed_events);
+	if (!host->debugfs_completed_events)
+		goto err_completed_events;
+
+	return;
+
+err_completed_events:
+	debugfs_remove(host->debugfs_pending_events);
+err_pending_events:
+	debugfs_remove(host->debugfs_req);
+err_req:
+	debugfs_remove(host->debugfs_regs);
+err_regs:
+	debugfs_remove(host->debugfs_root);
+err_root:
+	host->debugfs_root = NULL;
+	dev_err(&host->pdev->dev,
+		"failed to initialize debugfs for %s\n",
+		mmc_hostname(mmc));
+}
+
+static void atmci_cleanup_debugfs(struct atmel_mci *host)
+{
+	if (host->debugfs_root) {
+		debugfs_remove(host->debugfs_completed_events);
+		debugfs_remove(host->debugfs_pending_events);
+		debugfs_remove(host->debugfs_req);
+		debugfs_remove(host->debugfs_regs);
+		debugfs_remove(host->debugfs_root);
+		host->debugfs_root = NULL;
+	}
+}
+#else
+static inline void atmci_init_debugfs(struct atmel_mci *host)
+{
+
+}
+
+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
+{
+
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+					unsigned int ns)
+{
+	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
+}
+
+static void atmci_set_timeout(struct atmel_mci *host,
+			      struct mmc_data *data)
+{
+	static unsigned dtomul_to_shift[] = {
+		0, 4, 7, 8, 10, 12, 16, 20
+	};
+	unsigned timeout;
+	unsigned dtocyc, dtomul;
+
+	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+
+	for (dtomul = 0; dtomul < 8; dtomul++) {
+		unsigned shift = dtomul_to_shift[dtomul];
+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
+		if (dtocyc < 15)
+			break;
+	}
+
+	if (dtomul >= 8) {
+		dtomul = 7;
+		dtocyc = 15;
+	}
+
+	pr_debug("%s: setting timeout to %u cycles\n",
+		 mmc_hostname(host->mmc),
+		 dtocyc << dtomul_to_shift[dtomul]);
+	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
+				| MCI_BF(DTOCYC, dtocyc)));
+}
+
+/*
+ * Return mask with interrupt flags to be handled for this command.
+ */
+static u32 atmci_prepare_command(struct mmc_host *mmc,
+				 struct mmc_command *cmd,
+				 u32 *cmd_flags)
+{
+	u32 cmdr;
+	u32 iflags;
+
+	cmd->error = MMC_ERR_NONE;
+
+	cmdr = 0;
+	BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
+	cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
+		else
+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
+	}
+
+	/*
+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
+	 * it's too difficult to determine whether this is an ACMD or
+	 * not. Better make it 64.
+	 */
+	cmdr |= MCI_BIT(MAXLAT);
+
+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cmdr |= MCI_BIT(OPDCMD);
+
+	iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
+	if (!(cmd->flags & MMC_RSP_CRC))
+		iflags &= ~MCI_BIT(RCRCE);
+
+	pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
+		 mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
+		 (unsigned long)cmdr);
+
+	*cmd_flags = cmdr;
+	return iflags;
+}
+
+static void atmci_start_command(struct atmel_mci *host,
+				struct mmc_command *cmd,
+				u32 cmd_flags)
+{
+	WARN_ON(host->cmd);
+	host->cmd = cmd;
+
+	mci_writel(host, ARGR, cmd->arg);
+	mci_writel(host, CMDR, cmd_flags);
+
+	if (cmd->data)
+		dma_start_request(host->dma.req.req.dmac,
+				  host->dma.req.req.channel);
+}
+
+/*
+ * Returns a mask of flags to be set in the command register when the
+ * command to start the transfer is to be sent.
+ */
+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	u32 cmd_flags;
+
+	WARN_ON(host->data);
+	host->data = data;
+
+	atmci_set_timeout(host, data);
+	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
+				| MCI_BF(BLKLEN, data->blksz)));
+	host->dma.req.block_size = data->blksz;
+	host->dma.req.nr_blocks = data->blocks;
+
+	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
+	if (data->flags & MMC_DATA_STREAM)
+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
+	else if (data->blocks > 1)
+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
+	else
+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
+
+	if (data->flags & MMC_DATA_READ) {
+		cmd_flags |= MCI_BIT(TRDIR);
+		host->dma.req.nr_sg
+			= dma_map_sg(&host->pdev->dev, data->sg,
+				     data->sg_len, DMA_FROM_DEVICE);
+		host->dma.req.periph_id = host->dma.rx_periph_id;
+		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
+		host->dma.req.data_reg = host->mapbase + MCI_RDR;
+	} else {
+		host->dma.req.nr_sg
+			= dma_map_sg(&host->pdev->dev, data->sg,
+				     data->sg_len, DMA_TO_DEVICE);
+		host->dma.req.periph_id = host->dma.tx_periph_id;
+		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
+		host->dma.req.data_reg = host->mapbase + MCI_TDR;
+	}
+	host->dma.req.sg = data->sg;
+
+	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
+
+	return cmd_flags;
+}
+
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+	u32 iflags;
+	u32 cmdflags = 0;
+
+	iflags = mci_readl(host, IMR);
+	if (iflags)
+		printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = mrq;
+	host->pending_events = 0;
+	host->completed_events = 0;
+
+	iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
+
+	if (mrq->stop) {
+		BUG_ON(!data);
+
+		host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
+							  &host->stop_cmdr);
+		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
+		if (!(data->flags & MMC_DATA_WRITE))
+			host->stop_cmdr |= MCI_BIT(TRDIR);
+		if (data->flags & MMC_DATA_STREAM)
+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
+		else
+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
+	}
+	if (data) {
+		cmdflags |= atmci_prepare_data(mmc, data);
+		iflags |= MCI_DATA_ERROR_FLAGS;
+	}
+
+	atmci_start_command(host, mrq->cmd, cmdflags);
+	mci_writel(host, IER, iflags);
+}
+
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	if (ios->clock) {
+		u32 clkdiv;
+
+		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
+		if (clkdiv > 255)
+			clkdiv = 255;
+		mci_writel(host, MR, (clkdiv
+				      | MCI_BIT(WRPROOF)
+				      | MCI_BIT(RDPROOF)));
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		mci_writel(host, SDCR, 0);
+		break;
+	case MMC_BUS_WIDTH_4:
+		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
+		break;
+	}
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		mci_writel(host, CR, MCI_BIT(MCIDIS));
+		break;
+	case MMC_POWER_UP:
+		mci_writel(host, CR, MCI_BIT(SWRST));
+		break;
+	case MMC_POWER_ON:
+		mci_writel(host, CR, MCI_BIT(MCIEN));
+		break;
+	}
+}
+
+static int atmci_get_ro(struct mmc_host *mmc)
+{
+	int read_only = 0;
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	if (host->wp_pin >= 0) {
+		read_only = gpio_get_value(host->wp_pin);
+		pr_debug("%s: card is %s\n", mmc_hostname(mmc),
+			 read_only ? "read-only" : "read-write");
+	} else {
+		pr_debug("%s: no pin for checking read-only switch."
+			 " Assuming write-enable.\n", mmc_hostname(mmc));
+	}
+
+	return read_only;
+}
+
+static struct mmc_host_ops atmci_ops = {
+	.request	= atmci_request,
+	.set_ios	= atmci_set_ios,
+	.get_ro		= atmci_get_ro,
+};
+
+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	WARN_ON(host->cmd || host->data);
+	host->mrq = NULL;
+
+	mmc_request_done(mmc, mrq);
+}
+
+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
+			  u32 flags)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
+	mci_writel(host, IER, host->stop_iflags);
+}
+
+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
+{
+	host->data = NULL;
+	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
+		     ((data->flags & MMC_DATA_WRITE)
+		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
+	/*
+	 * Data might complete before command for very short transfers
+	 * (like READ_SCR)
+	 */
+	if (mci_cmd_is_complete(host)
+	    && (!data->stop || mci_stop_is_complete(host)))
+		atmci_request_end(host->mmc, data->mrq);
+}
+
+static void atmci_command_error(struct mmc_host *mmc,
+				struct mmc_command *cmd,
+				u32 status)
+{
+	pr_debug("%s: command error: status=0x%08x\n",
+		 mmc_hostname(mmc), status);
+
+	if (status & MCI_BIT(RTOE))
+		cmd->error = MMC_ERR_TIMEOUT;
+	else if (status & MCI_BIT(RCRCE))
+		cmd->error = MMC_ERR_BADCRC;
+	else
+		cmd->error = MMC_ERR_FAILED;
+}
+
+static void atmci_tasklet_func(unsigned long priv)
+{
+	struct mmc_host *mmc = (struct mmc_host *)priv;
+	struct atmel_mci *host = mmc_priv(mmc);
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_data *data = host->data;
+
+	pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
+		 host->pending_events, host->completed_events,
+		 mci_readl(host, IMR));
+
+	if (mci_clear_cmd_error_is_pending(host)) {
+		struct mmc_command *cmd;
+
+		mci_set_cmd_error_complete(host);
+		mci_clear_cmd_pending(host);
+		cmd = host->mrq->cmd;
+
+		if (cmd->data) {
+			dma_stop_request(host->dma.req.req.dmac,
+					 host->dma.req.req.channel);
+			host->data = NULL;
+		}
+
+		atmci_command_error(mmc, cmd, host->error_status);
+		atmci_request_end(mmc, cmd->mrq);
+	}
+	if (mci_clear_stop_error_is_pending(host)) {
+		mci_set_stop_error_complete(host);
+		mci_clear_stop_pending(host);
+		atmci_command_error(mmc, host->mrq->stop,
+				    host->error_status);
+		if (!host->data)
+			atmci_request_end(mmc, host->mrq);
+	}
+	if (mci_clear_cmd_is_pending(host)) {
+		mci_set_cmd_complete(host);
+		if (!mrq->data || mci_data_is_complete(host)
+		    || mci_data_error_is_complete(host))
+			atmci_request_end(mmc, mrq);
+	}
+	if (mci_clear_stop_is_pending(host)) {
+		mci_set_stop_complete(host);
+		if (mci_data_is_complete(host)
+		    || mci_data_error_is_complete(host))
+			atmci_request_end(mmc, mrq);
+	}
+	if (mci_clear_dma_error_is_pending(host)) {
+		mci_set_dma_error_complete(host);
+		mci_clear_data_pending(host);
+
+		/* DMA controller got bus error => invalid address */
+		data->error = MMC_ERR_INVALID;
+
+		printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
+		       mmc_hostname(mmc), host->data->bytes_xfered);
+
+		if (data->stop
+		    && !mci_set_stop_sent_is_completed(host))
+			/* TODO: Check if card is still present */
+			send_stop_cmd(host->mmc, data, 0);
+
+		atmci_data_complete(host, data);
+	}
+	if (mci_clear_data_error_is_pending(host)) {
+		u32 status = host->error_status;
+
+		mci_set_data_error_complete(host);
+		mci_clear_data_pending(host);
+
+		dma_stop_request(host->dma.req.req.dmac,
+				 host->dma.req.req.channel);
+
+		printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
+		       mmc_hostname(host->mmc), status);
+
+		if (status & MCI_BIT(DCRCE)) {
+			printk(KERN_DEBUG "%s: Data CRC error\n",
+			       mmc_hostname(host->mmc));
+			data->error = MMC_ERR_BADCRC;
+		} else if (status & MCI_BIT(DTOE)) {
+			printk(KERN_DEBUG "%s: Data Timeout error\n",
+			       mmc_hostname(host->mmc));
+			data->error = MMC_ERR_TIMEOUT;
+		} else {
+			printk(KERN_DEBUG "%s: Data FIFO error\n",
+			       mmc_hostname(host->mmc));
+			data->error = MMC_ERR_FIFO;
+		}
+		printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
+		       mmc_hostname(host->mmc), data->bytes_xfered);
+
+		if (data->stop
+		    && !mci_set_stop_sent_is_completed(host))
+			/* TODO: Check if card is still present */
+			send_stop_cmd(host->mmc, data, 0);
+
+		atmci_data_complete(host, data);
+	}
+	if (mci_clear_data_is_pending(host)) {
+		mci_set_data_complete(host);
+		data->bytes_xfered = data->blocks * data->blksz;
+		atmci_data_complete(host, data);
+	}
+	if (mci_clear_card_detect_is_pending(host)) {
+		/* Reset controller if card is gone */
+		if (!host->present) {
+			mci_writel(host, CR, MCI_BIT(SWRST));
+			mci_writel(host, IDR, ~0UL);
+			mci_writel(host, CR, MCI_BIT(MCIEN));
+		}
+
+		/* Clean up queue if present */
+		if (mrq) {
+			if (!mci_cmd_is_complete(host)
+			    && !mci_cmd_error_is_complete(host)) {
+				mrq->cmd->error = MMC_ERR_TIMEOUT;
+			}
+			if (mrq->data && !mci_data_is_complete(host)
+			    && !mci_data_error_is_complete(host)) {
+				dma_stop_request(host->dma.req.req.dmac,
+						host->dma.req.req.channel);
+				host->data->error = MMC_ERR_TIMEOUT;
+				atmci_data_complete(host, data);
+			}
+			if (mrq->stop && !mci_stop_is_complete(host)
+			    && !mci_stop_error_is_complete(host)) {
+				mrq->stop->error = MMC_ERR_TIMEOUT;
+			}
+
+			host->cmd = NULL;
+			atmci_request_end(mmc, mrq);
+		}
+		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+	}
+}
+
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	struct mmc_command *cmd = host->cmd;
+
+	/*
+	 * Read the response now so that we're free to send a new
+	 * command immediately.
+	 */
+	cmd->resp[0] = mci_readl(host, RSPR);
+	cmd->resp[1] = mci_readl(host, RSPR);
+	cmd->resp[2] = mci_readl(host, RSPR);
+	cmd->resp[3] = mci_readl(host, RSPR);
+
+	mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
+	host->cmd = NULL;
+
+	if (mci_stop_sent_is_complete(host))
+		mci_set_stop_pending(host);
+	else
+		mci_set_cmd_pending(host);
+
+	tasklet_schedule(&host->tasklet);
+}
+
+static void atmci_xfer_complete(struct dma_request *_req)
+{
+	struct dma_request_sg *req = to_dma_request_sg(_req);
+	struct atmel_mci_dma *dma;
+	struct atmel_mci *host;
+	struct mmc_data *data;
+
+	dma = container_of(req, struct atmel_mci_dma, req);
+	host = container_of(dma, struct atmel_mci, dma);
+	data = host->data;
+
+	if (data->stop && !mci_set_stop_sent_is_completed(host))
+		send_stop_cmd(host->mmc, data, 0);
+
+	if (data->flags & MMC_DATA_READ) {
+		mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
+		mci_set_data_pending(host);
+		tasklet_schedule(&host->tasklet);
+	} else {
+		/*
+		 * For the WRITE case, wait for NOTBUSY. This function
+		 * is called when everything has been written to the
+		 * controller, not when the card is done programming.
+		 */
+		mci_writel(host, IER, MCI_BIT(NOTBUSY));
+	}
+}
+
+static void atmci_dma_error(struct dma_request *_req)
+{
+	struct dma_request_sg *req = to_dma_request_sg(_req);
+	struct atmel_mci_dma *dma;
+	struct atmel_mci *host;
+
+	dma = container_of(req, struct atmel_mci_dma, req);
+	host = container_of(dma, struct atmel_mci, dma);
+
+	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
+			       | MCI_DATA_ERROR_FLAGS));
+
+	mci_set_dma_error_pending(host);
+	tasklet_schedule(&host->tasklet);
+}
+
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
+	struct mmc_host *mmc = dev_id;
+	struct atmel_mci *host = mmc_priv(mmc);
+	u32 status, mask, pending;
+
+	spin_lock(&mmc->lock);
+
+	status = mci_readl(host, SR);
+	mask = mci_readl(host, IMR);
+	pending = status & mask;
+
+	do {
+		if (pending & MCI_CMD_ERROR_FLAGS) {
+			mci_writel(host, IDR, (MCI_BIT(CMDRDY)
+					       | MCI_BIT(NOTBUSY)
+					       | MCI_CMD_ERROR_FLAGS
+					       | MCI_DATA_ERROR_FLAGS));
+			host->error_status = status;
+			host->cmd = NULL;
+			if (mci_stop_sent_is_complete(host))
+				mci_set_stop_error_pending(host);
+			else
+				mci_set_cmd_error_pending(host);
+			tasklet_schedule(&host->tasklet);
+			break;
+		}
+		if (pending & MCI_DATA_ERROR_FLAGS) {
+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
+					       | MCI_DATA_ERROR_FLAGS));
+			host->error_status = status;
+			mci_set_data_error_pending(host);
+			tasklet_schedule(&host->tasklet);
+			break;
+		}
+		if (pending & MCI_BIT(CMDRDY))
+			atmci_cmd_interrupt(mmc, status);
+		if (pending & MCI_BIT(NOTBUSY)) {
+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
+					       | MCI_DATA_ERROR_FLAGS));
+			mci_set_data_pending(host);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		status = mci_readl(host, SR);
+		mask = mci_readl(host, IMR);
+		pending = status & mask;
+	} while (pending);
+
+	spin_unlock(&mmc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
+{
+	struct mmc_host *mmc = dev_id;
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	int present = !gpio_get_value(irq_to_gpio(irq));
+
+	if (present != host->present) {
+		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
+			 present ? "inserted" : "removed");
+		host->present = present;
+		mci_set_card_detect_pending(host);
+		tasklet_schedule(&host->tasklet);
+	}
+	return IRQ_HANDLED;
+}
+
+static int __devinit atmci_probe(struct platform_device *pdev)
+{
+	struct mci_platform_data *board;
+	struct atmel_mci *host;
+	struct mmc_host *mmc;
+	struct resource *regs;
+	int irq;
+	int ret;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	board = pdev->dev.platform_data;
+
+	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	host = mmc_priv(mmc);
+	host->pdev = pdev;
+	host->mmc = mmc;
+	if (board) {
+		host->detect_pin = board->detect_pin;
+		host->wp_pin = board->wp_pin;
+	} else {
+		host->detect_pin = -1;
+		host->detect_pin = -1;
+	}
+
+	host->mck = clk_get(&pdev->dev, "mci_clk");
+	if (IS_ERR(host->mck)) {
+		ret = PTR_ERR(host->mck);
+		goto out_free_host;
+	}
+	clk_enable(host->mck);
+
+	ret = -ENOMEM;
+	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!host->regs)
+		goto out_disable_clk;
+
+	host->bus_hz = clk_get_rate(host->mck);
+	host->mapbase = regs->start;
+
+	mmc->ops = &atmci_ops;
+	mmc->f_min = (host->bus_hz + 511) / 512;
+	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
+	mmc->ocr_avail	= 0x00100000;
+	mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
+
+	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
+	if (ret)
+		goto out_unmap;
+
+	/* Assume card is present if we don't have a detect pin */
+	host->present = 1;
+	if (host->detect_pin >= 0) {
+		if (gpio_request(host->detect_pin, "mmc_detect")) {
+			printk(KERN_WARNING "%s: no detect pin available\n",
+			       mmc_hostname(host->mmc));
+			host->detect_pin = -1;
+		} else {
+			host->present = !gpio_get_value(host->detect_pin);
+		}
+	}
+	if (host->wp_pin >= 0) {
+		if (gpio_request(host->wp_pin, "mmc_wp")) {
+			printk(KERN_WARNING "%s: no WP pin available\n",
+			       mmc_hostname(host->mmc));
+			host->wp_pin = -1;
+		}
+	}
+
+	/* TODO: Get this information from platform data */
+	ret = -ENOMEM;
+	host->dma.req.req.dmac = find_dma_controller(0);
+	if (!host->dma.req.req.dmac) {
+		printk(KERN_ERR
+		       "mmci: No DMA controller available, aborting\n");
+		goto out_free_irq;
+	}
+	ret = dma_alloc_channel(host->dma.req.req.dmac);
+	if (ret < 0) {
+		printk(KERN_ERR
+		       "mmci: Unable to allocate DMA channel, aborting\n");
+		goto out_free_irq;
+	}
+	host->dma.req.req.channel = ret;
+	host->dma.req.width = DMA_WIDTH_32BIT;
+	host->dma.req.req.xfer_complete = atmci_xfer_complete;
+	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
+	host->dma.req.req.error = atmci_dma_error;
+	host->dma.rx_periph_id = 0;
+	host->dma.tx_periph_id = 1;
+
+	mci_writel(host, CR, MCI_BIT(SWRST));
+	mci_writel(host, IDR, ~0UL);
+	mci_writel(host, CR, MCI_BIT(MCIEN));
+
+	platform_set_drvdata(pdev, host);
+
+	mmc_add_host(mmc);
+
+	if (host->detect_pin >= 0) {
+		ret = request_irq(gpio_to_irq(host->detect_pin),
+				  atmci_detect_change,
+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				  DRIVER_NAME, mmc);
+		if (ret) {
+			printk(KERN_ERR
+			       "%s: could not request IRQ %d for detect pin\n",
+			       mmc_hostname(mmc),
+			       gpio_to_irq(host->detect_pin));
+			gpio_free(host->detect_pin);
+			host->detect_pin = -1;
+		}
+	}
+
+	printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
+	       mmc_hostname(mmc), host->mapbase, irq);
+
+	atmci_init_debugfs(host);
+
+	return 0;
+
+out_free_irq:
+	if (host->detect_pin >= 0)
+		gpio_free(host->detect_pin);
+	if (host->wp_pin >= 0)
+		gpio_free(host->wp_pin);
+	free_irq(irq, mmc);
+out_unmap:
+	iounmap(host->regs);
+out_disable_clk:
+	clk_disable(host->mck);
+	clk_put(host->mck);
+out_free_host:
+	mmc_free_host(mmc);
+	return ret;
+}
+
+static int __devexit atmci_remove(struct platform_device *pdev)
+{
+	struct atmel_mci *host = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (host) {
+		atmci_cleanup_debugfs(host);
+
+		if (host->detect_pin >= 0) {
+			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
+			cancel_delayed_work(&host->mmc->detect);
+			gpio_free(host->detect_pin);
+		}
+
+		mmc_remove_host(host->mmc);
+
+		mci_writel(host, IDR, ~0UL);
+		mci_writel(host, CR, MCI_BIT(MCIDIS));
+		mci_readl(host, SR);
+
+		dma_release_channel(host->dma.req.req.dmac,
+				    host->dma.req.req.channel);
+
+		if (host->wp_pin >= 0)
+			gpio_free(host->wp_pin);
+
+		free_irq(platform_get_irq(pdev, 0), host->mmc);
+		iounmap(host->regs);
+
+		clk_disable(host->mck);
+		clk_put(host->mck);
+
+		mmc_free_host(host->mmc);
+	}
+	return 0;
+}
+
+static struct platform_driver atmci_driver = {
+	.probe		= atmci_probe,
+	.remove		= __devexit_p(atmci_remove),
+	.driver		= {
+		.name		= DRIVER_NAME,
+	},
+};
+
+static int __init atmci_init(void)
+{
+	return platform_driver_register(&atmci_driver);
+}
+
+static void __exit atmci_exit(void)
+{
+	platform_driver_unregister(&atmci_driver);
+}
+
+module_init(atmci_init);
+module_exit(atmci_exit);
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.h linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.h
--- linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,192 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
+#define __DRIVERS_MMC_ATMEL_MCI_H__
+
+/* MCI register offsets */
+#define MCI_CR					0x0000
+#define MCI_MR					0x0004
+#define MCI_DTOR				0x0008
+#define MCI_SDCR				0x000c
+#define MCI_ARGR				0x0010
+#define MCI_CMDR				0x0014
+#define MCI_BLKR				0x0018
+#define MCI_RSPR				0x0020
+#define MCI_RSPR1				0x0024
+#define MCI_RSPR2				0x0028
+#define MCI_RSPR3				0x002c
+#define MCI_RDR					0x0030
+#define MCI_TDR					0x0034
+#define MCI_SR					0x0040
+#define MCI_IER					0x0044
+#define MCI_IDR					0x0048
+#define MCI_IMR					0x004c
+
+/* Bitfields in CR */
+#define MCI_MCIEN_OFFSET			0
+#define MCI_MCIEN_SIZE				1
+#define MCI_MCIDIS_OFFSET			1
+#define MCI_MCIDIS_SIZE				1
+#define MCI_PWSEN_OFFSET			2
+#define MCI_PWSEN_SIZE				1
+#define MCI_PWSDIS_OFFSET			3
+#define MCI_PWSDIS_SIZE				1
+#define MCI_SWRST_OFFSET			7
+#define MCI_SWRST_SIZE				1
+
+/* Bitfields in MR */
+#define MCI_CLKDIV_OFFSET			0
+#define MCI_CLKDIV_SIZE				8
+#define MCI_PWSDIV_OFFSET			8
+#define MCI_PWSDIV_SIZE				3
+#define MCI_RDPROOF_OFFSET			11
+#define MCI_RDPROOF_SIZE			1
+#define MCI_WRPROOF_OFFSET			12
+#define MCI_WRPROOF_SIZE			1
+#define MCI_DMAPADV_OFFSET			14
+#define MCI_DMAPADV_SIZE			1
+#define MCI_BLKLEN_OFFSET			16
+#define MCI_BLKLEN_SIZE				16
+
+/* Bitfields in DTOR */
+#define MCI_DTOCYC_OFFSET			0
+#define MCI_DTOCYC_SIZE				4
+#define MCI_DTOMUL_OFFSET			4
+#define MCI_DTOMUL_SIZE				3
+
+/* Bitfields in SDCR */
+#define MCI_SDCSEL_OFFSET			0
+#define MCI_SDCSEL_SIZE				4
+#define MCI_SDCBUS_OFFSET			7
+#define MCI_SDCBUS_SIZE				1
+
+/* Bitfields in ARGR */
+#define MCI_ARG_OFFSET				0
+#define MCI_ARG_SIZE				32
+
+/* Bitfields in CMDR */
+#define MCI_CMDNB_OFFSET			0
+#define MCI_CMDNB_SIZE				6
+#define MCI_RSPTYP_OFFSET			6
+#define MCI_RSPTYP_SIZE				2
+#define MCI_SPCMD_OFFSET			8
+#define MCI_SPCMD_SIZE				3
+#define MCI_OPDCMD_OFFSET			11
+#define MCI_OPDCMD_SIZE				1
+#define MCI_MAXLAT_OFFSET			12
+#define MCI_MAXLAT_SIZE				1
+#define MCI_TRCMD_OFFSET			16
+#define MCI_TRCMD_SIZE				2
+#define MCI_TRDIR_OFFSET			18
+#define MCI_TRDIR_SIZE				1
+#define MCI_TRTYP_OFFSET			19
+#define MCI_TRTYP_SIZE				2
+
+/* Bitfields in BLKR */
+#define MCI_BCNT_OFFSET				0
+#define MCI_BCNT_SIZE				16
+
+/* Bitfields in RSPRn */
+#define MCI_RSP_OFFSET				0
+#define MCI_RSP_SIZE				32
+
+/* Bitfields in SR/IER/IDR/IMR */
+#define MCI_CMDRDY_OFFSET			0
+#define MCI_CMDRDY_SIZE				1
+#define MCI_RXRDY_OFFSET			1
+#define MCI_RXRDY_SIZE				1
+#define MCI_TXRDY_OFFSET			2
+#define MCI_TXRDY_SIZE				1
+#define MCI_BLKE_OFFSET				3
+#define MCI_BLKE_SIZE				1
+#define MCI_DTIP_OFFSET				4
+#define MCI_DTIP_SIZE				1
+#define MCI_NOTBUSY_OFFSET			5
+#define MCI_NOTBUSY_SIZE			1
+#define MCI_ENDRX_OFFSET			6
+#define MCI_ENDRX_SIZE				1
+#define MCI_ENDTX_OFFSET			7
+#define MCI_ENDTX_SIZE				1
+#define MCI_RXBUFF_OFFSET			14
+#define MCI_RXBUFF_SIZE				1
+#define MCI_TXBUFE_OFFSET			15
+#define MCI_TXBUFE_SIZE				1
+#define MCI_RINDE_OFFSET			16
+#define MCI_RINDE_SIZE				1
+#define MCI_RDIRE_OFFSET			17
+#define MCI_RDIRE_SIZE				1
+#define MCI_RCRCE_OFFSET			18
+#define MCI_RCRCE_SIZE				1
+#define MCI_RENDE_OFFSET			19
+#define MCI_RENDE_SIZE				1
+#define MCI_RTOE_OFFSET				20
+#define MCI_RTOE_SIZE				1
+#define MCI_DCRCE_OFFSET			21
+#define MCI_DCRCE_SIZE				1
+#define MCI_DTOE_OFFSET				22
+#define MCI_DTOE_SIZE				1
+#define MCI_OVRE_OFFSET				30
+#define MCI_OVRE_SIZE				1
+#define MCI_UNRE_OFFSET				31
+#define MCI_UNRE_SIZE				1
+
+/* Constants for DTOMUL */
+#define MCI_DTOMUL_1_CYCLE			0
+#define MCI_DTOMUL_16_CYCLES			1
+#define MCI_DTOMUL_128_CYCLES			2
+#define MCI_DTOMUL_256_CYCLES			3
+#define MCI_DTOMUL_1024_CYCLES			4
+#define MCI_DTOMUL_4096_CYCLES			5
+#define MCI_DTOMUL_65536_CYCLES			6
+#define MCI_DTOMUL_1048576_CYCLES		7
+
+/* Constants for RSPTYP */
+#define MCI_RSPTYP_NO_RESP			0
+#define MCI_RSPTYP_48_BIT			1
+#define MCI_RSPTYP_136_BIT			2
+
+/* Constants for SPCMD */
+#define MCI_SPCMD_NO_SPEC_CMD			0
+#define MCI_SPCMD_INIT_CMD			1
+#define MCI_SPCMD_SYNC_CMD			2
+#define MCI_SPCMD_INT_CMD			4
+#define MCI_SPCMD_INT_RESP			5
+
+/* Constants for TRCMD */
+#define MCI_TRCMD_NO_TRANS			0
+#define MCI_TRCMD_START_TRANS			1
+#define MCI_TRCMD_STOP_TRANS			2
+
+/* Constants for TRTYP */
+#define MCI_TRTYP_BLOCK				0
+#define MCI_TRTYP_MULTI_BLOCK			1
+#define MCI_TRTYP_STREAM			2
+
+/* Bit manipulation macros */
+#define MCI_BIT(name)					\
+	(1 << MCI_##name##_OFFSET)
+#define MCI_BF(name,value)				\
+	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
+	 << MCI_##name##_OFFSET)
+#define MCI_BFEXT(name,value)				\
+	(((value) >> MCI_##name##_OFFSET)		\
+	 & ((1 << MCI_##name##_SIZE) - 1))
+#define MCI_BFINS(name,value,old)			\
+	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
+		    << MCI_##name##_OFFSET))		\
+	 | MCI_BF(name,value))
+
+/* Register access macros */
+#define mci_readl(port,reg)				\
+	__raw_readl((port)->regs + MCI_##reg)
+#define mci_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff -urN linux-2.6.20.4-0rig/drivers/mmc/Kconfig linux-2.6.20.4-atmel/drivers/mmc/Kconfig
--- linux-2.6.20.4-0rig/drivers/mmc/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mmc/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -71,6 +71,16 @@
 
 	  If unsure, say N.
 
+config MMC_ATMELMCI
+	tristate "Atmel Multimedia Card Interface support"
+	depends on AVR32 && MMC
+	help
+	  This selects the Atmel Multimedia Card Interface. If you have
+	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
+	  slot, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_WBSD
 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
 	depends on MMC && ISA_DMA_API
diff -urN linux-2.6.20.4-0rig/drivers/mmc/Makefile linux-2.6.20.4-atmel/drivers/mmc/Makefile
--- linux-2.6.20.4-0rig/drivers/mmc/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mmc/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -23,6 +23,7 @@
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 
 mmc_core-y := mmc.o mmc_sysfs.o
diff -urN linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0001.c linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0001.c
--- linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0001.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0001.c	2007-03-24 16:42:29.000000000 +0100
@@ -47,6 +47,7 @@
 #define I82802AC	0x00ac
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
+#define AT49BV640D	0x02de
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -153,6 +154,47 @@
 }
 #endif
 
+/* Atmel chips don't use the same PRI format as Intel chips */
+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+	struct cfi_pri_atmel atmel_pri;
+	uint32_t features = 0;
+
+	/* Reverse byteswapping */
+	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
+	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
+	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
+
+	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
+	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
+
+	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
+
+	if (atmel_pri.Features & 0x01) /* chip erase supported */
+		features |= (1<<0);
+	if (atmel_pri.Features & 0x02) /* erase suspend supported */
+		features |= (1<<1);
+	if (atmel_pri.Features & 0x04) /* program suspend supported */
+		features |= (1<<2);
+	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
+		features |= (1<<9);
+	if (atmel_pri.Features & 0x20) /* page mode read supported */
+		features |= (1<<7);
+	if (atmel_pri.Features & 0x40) /* queued erase supported */
+		features |= (1<<4);
+	if (atmel_pri.Features & 0x80) /* Protection bits supported */
+		features |= (1<<6);
+
+	extp->FeatureSupport = features;
+
+	/* burst write mode not supported */
+	cfi->cfiq->BufWriteTimeoutTyp = 0;
+	cfi->cfiq->BufWriteTimeoutMax = 0;
+}
+
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
 static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
@@ -221,6 +263,7 @@
 }
 
 static struct cfi_fixup cfi_fixup_table[] = {
+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
 #endif
diff -urN linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0002.c
--- linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0002.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0002.c	2007-03-24 16:42:29.000000000 +0100
@@ -185,6 +185,10 @@
 		extp->TopBottom = 2;
 	else
 		extp->TopBottom = 3;
+
+	/* burst write mode not supported */
+	cfi->cfiq->BufWriteTimeoutTyp = 0;
+	cfi->cfiq->BufWriteTimeoutMax = 0;
 }
 
 static void fixup_use_secsi(struct mtd_info *mtd, void *param)
@@ -217,6 +221,7 @@
 }
 
 static struct cfi_fixup cfi_fixup_table[] = {
+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef AMD_BOOTLOC_BUG
 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
 #endif
@@ -229,7 +234,6 @@
 #if !FORCE_WORD_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
 #endif
-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup jedec_fixup_table[] = {
diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/at91_dataflash.c linux-2.6.20.4-atmel/drivers/mtd/devices/at91_dataflash.c
--- linux-2.6.20.4-0rig/drivers/mtd/devices/at91_dataflash.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mtd/devices/at91_dataflash.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,640 @@
+/*
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
+ *
+ *  Copyright (C) SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/arch/spi.h>
+
+#undef DEBUG_DATAFLASH
+
+#define DATAFLASH_MAX_DEVICES	4	/* max number of dataflash devices */
+#undef	DATAFLASH_ALWAYS_ADD_DEVICE	/* always add whole device when using partitions? */
+
+#define OP_READ_CONTINUOUS	0xE8
+#define OP_READ_PAGE		0xD2
+#define OP_READ_BUFFER1		0xD4
+#define OP_READ_BUFFER2		0xD6
+#define OP_READ_STATUS		0xD7
+
+#define OP_ERASE_PAGE		0x81
+#define OP_ERASE_BLOCK		0x50
+
+#define OP_TRANSFER_BUF1	0x53
+#define OP_TRANSFER_BUF2	0x55
+#define OP_COMPARE_BUF1		0x60
+#define OP_COMPARE_BUF2		0x61
+
+#define OP_PROGRAM_VIA_BUF1	0x82
+#define OP_PROGRAM_VIA_BUF2	0x85
+
+struct dataflash_local
+{
+	int spi;			/* SPI chip-select number */
+
+	unsigned int page_size;		/* number of bytes per page */
+	unsigned short page_offset;	/* page offset in flash address */
+};
+
+
+/* Detected DataFlash devices */
+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
+static int nr_devices = 0;
+
+/* ......................................................................... */
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+static struct mtd_partition static_partitions_2M[] =
+{
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 1 * 32 * 8 * 528,	/* 1st sector = 32 blocks * 8 pages * 528 bytes */
+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 6 * 32 * 8 * 528,	/* 6 sectors */
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,	/* rest = 9 sectors */
+	}
+};
+
+static struct mtd_partition static_partitions_4M[] =
+{
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 1 * 64 * 8 * 528,	/* 1st sector = 64 blocks * 8 pages * 528 bytes */
+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 4 * 64 * 8 * 528,	/* 4 sectors */
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,	/* rest = 11 sectors */
+	}
+};
+
+#if defined(CONFIG_MACH_KAFA)
+static struct mtd_partition static_partitions_8M[] =
+{
+	{
+		name:		"romboot",
+		offset:		0,
+		size:		16 * 1056,	/* 160 Kb */
+		mask_flags:	MTD_WRITEABLE,		/* read-only */
+	},
+	{
+		name:		"uboot",
+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
+		size:		128 * 1056,		/* 1 MB */
+	},
+	{
+		name:		"kernel",
+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
+		size:		1024 * 1056,		/* 1 MB */
+	},
+	{
+		name:		"filesystem",
+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
+		size:		MTDPART_SIZ_FULL,
+	}
+};
+
+#else
+
+static struct mtd_partition static_partitions_8M[] =
+{
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 1 * 32 * 8 * 1056,	/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
+	}
+};
+#endif
+
+static const char *part_probes[] = { "cmdlinepart", NULL, };
+
+#endif
+
+/* ......................................................................... */
+
+/* Allocate a single SPI transfer descriptor.  We're assuming that if multiple
+   SPI transfers occur at the same time, spi_access_bus() will serialize them.
+   If this is not valid, then either (i) each dataflash 'priv' structure
+   needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
+   another mechanism.   */
+static struct spi_transfer_list* spi_transfer_desc;
+
+/*
+ * Perform a SPI transfer to access the DataFlash device.
+ */
+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
+		char* txnext, int txnext_len, char* rxnext, int rxnext_len)
+{
+	struct spi_transfer_list* list = spi_transfer_desc;
+
+	list->tx[0] = tx;	list->txlen[0] = tx_len;
+	list->rx[0] = rx;	list->rxlen[0] = rx_len;
+
+	list->tx[1] = txnext;	list->txlen[1] = txnext_len;
+	list->rx[1] = rxnext;	list->rxlen[1] = rxnext_len;
+
+	list->nr_transfers = nr;
+
+	return spi_transfer(list);
+}
+
+/* ......................................................................... */
+
+/*
+ * Poll the DataFlash device until it is READY.
+ */
+static void at91_dataflash_waitready(void)
+{
+	char* command = kmalloc(2, GFP_KERNEL);
+
+	if (!command)
+		return;
+
+	do {
+		command[0] = OP_READ_STATUS;
+		command[1] = 0;
+
+		do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
+	} while ((command[1] & 0x80) == 0);
+
+	kfree(command);
+}
+
+/*
+ * Return the status of the DataFlash device.
+ */
+static unsigned short at91_dataflash_status(void)
+{
+	unsigned short status;
+	char* command = kmalloc(2, GFP_KERNEL);
+
+	if (!command)
+		return 0;
+
+	command[0] = OP_READ_STATUS;
+	command[1] = 0;
+
+	do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
+	status = command[1];
+
+	kfree(command);
+	return status;
+}
+
+/* ......................................................................... */
+
+/*
+ * Erase blocks of flash.
+ */
+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
+	unsigned int pageaddr;
+	char* command;
+
+#ifdef DEBUG_DATAFLASH
+	printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
+#endif
+
+	/* Sanity checks */
+	if (instr->addr + instr->len > mtd->size)
+		return -EINVAL;
+	if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
+		return -EINVAL;
+	if ((instr->addr % priv->page_size) != 0)
+		return -EINVAL;
+
+	command = kmalloc(4, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	while (instr->len > 0) {
+		/* Calculate flash page address */
+		pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
+
+		command[0] = OP_ERASE_PAGE;
+		command[1] = (pageaddr & 0x00FF0000) >> 16;
+		command[2] = (pageaddr & 0x0000FF00) >> 8;
+		command[3] = 0;
+#ifdef DEBUG_DATAFLASH
+		printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
+#endif
+
+		/* Send command to SPI device */
+		spi_access_bus(priv->spi);
+		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
+
+		at91_dataflash_waitready();		/* poll status until ready */
+		spi_release_bus(priv->spi);
+
+		instr->addr += priv->page_size;		/* next page */
+		instr->len -= priv->page_size;
+	}
+
+	kfree(command);
+
+	/* Inform MTD subsystem that erase is complete */
+	instr->state = MTD_ERASE_DONE;
+	if (instr->callback)
+		instr->callback(instr);
+
+	return 0;
+}
+
+/*
+ * Read from the DataFlash device.
+ *   from   : Start offset in flash device
+ *   len    : Amount to read
+ *   retlen : About of data actually read
+ *   buf    : Buffer containing the data
+ */
+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
+	unsigned int addr;
+	char* command;
+
+#ifdef DEBUG_DATAFLASH
+	printk("dataflash_read: %lli .. %lli\n", from, from+len);
+#endif
+
+	*retlen = 0;
+
+	/* Sanity checks */
+	if (!len)
+		return 0;
+	if (from + len > mtd->size)
+		return -EINVAL;
+
+	/* Calculate flash page/byte address */
+	addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
+
+	command = kmalloc(8, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	command[0] = OP_READ_CONTINUOUS;
+	command[1] = (addr & 0x00FF0000) >> 16;
+	command[2] = (addr & 0x0000FF00) >> 8;
+	command[3] = (addr & 0x000000FF);
+#ifdef DEBUG_DATAFLASH
+	printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
+#endif
+
+	/* Send command to SPI device */
+	spi_access_bus(priv->spi);
+	do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
+	spi_release_bus(priv->spi);
+
+	*retlen = len;
+	kfree(command);
+	return 0;
+}
+
+/*
+ * Write to the DataFlash device.
+ *   to     : Start offset in flash device
+ *   len    : Amount to write
+ *   retlen : Amount of data actually written
+ *   buf    : Buffer containing the data
+ */
+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
+	unsigned int pageaddr, addr, offset, writelen;
+	size_t remaining;
+	u_char *writebuf;
+	unsigned short status;
+	int res = 0;
+	char* command;
+	char* tmpbuf = NULL;
+
+#ifdef DEBUG_DATAFLASH
+	printk("dataflash_write: %lli .. %lli\n", to, to+len);
+#endif
+
+	*retlen = 0;
+
+	/* Sanity checks */
+	if (!len)
+		return 0;
+	if (to + len > mtd->size)
+		return -EINVAL;
+
+	command = kmalloc(4, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	pageaddr = ((unsigned)to / priv->page_size);
+	offset = ((unsigned)to % priv->page_size);
+	if (offset + len > priv->page_size)
+		writelen = priv->page_size - offset;
+	else
+		writelen = len;
+	writebuf = (u_char *)buf;
+	remaining = len;
+
+	/* Allocate temporary buffer */
+	tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
+	if (!tmpbuf) {
+		kfree(command);
+		return -ENOMEM;
+	}
+
+	/* Gain access to the SPI bus */
+	spi_access_bus(priv->spi);
+
+	while (remaining > 0) {
+#ifdef DEBUG_DATAFLASH
+		printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
+#endif
+
+		/* (1) Transfer to Buffer1 */
+		if (writelen != priv->page_size) {
+			addr = pageaddr << priv->page_offset;
+			command[0] = OP_TRANSFER_BUF1;
+			command[1] = (addr & 0x00FF0000) >> 16;
+			command[2] = (addr & 0x0000FF00) >> 8;
+			command[3] = 0;
+#ifdef DEBUG_DATAFLASH
+			printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
+#endif
+			do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
+			at91_dataflash_waitready();
+		}
+
+		/* (2) Program via Buffer1 */
+		addr = (pageaddr << priv->page_offset) + offset;
+		command[0] = OP_PROGRAM_VIA_BUF1;
+		command[1] = (addr & 0x00FF0000) >> 16;
+		command[2] = (addr & 0x0000FF00) >> 8;
+		command[3] = (addr & 0x000000FF);
+#ifdef DEBUG_DATAFLASH
+		printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
+#endif
+		do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
+		at91_dataflash_waitready();
+
+		/* (3) Compare to Buffer1 */
+		addr = pageaddr << priv->page_offset;
+		command[0] = OP_COMPARE_BUF1;
+		command[1] = (addr & 0x00FF0000) >> 16;
+		command[2] = (addr & 0x0000FF00) >> 8;
+		command[3] = 0;
+#ifdef DEBUG_DATAFLASH
+		printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
+#endif
+		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
+		at91_dataflash_waitready();
+
+		/* Get result of the compare operation */
+		status = at91_dataflash_status();
+		if ((status & 0x40) == 1) {
+			printk("at91_dataflash: Write error on page %i\n", pageaddr);
+			remaining = 0;
+			res = -EIO;
+		}
+
+		remaining = remaining - writelen;
+		pageaddr++;
+		offset = 0;
+		writebuf += writelen;
+		*retlen += writelen;
+
+		if (remaining > priv->page_size)
+			writelen = priv->page_size;
+		else
+			writelen = remaining;
+	}
+
+	/* Release SPI bus */
+	spi_release_bus(priv->spi);
+
+	kfree(tmpbuf);
+	kfree(command);
+	return res;
+}
+
+/* ......................................................................... */
+
+/*
+ * Initialize and register DataFlash device with MTD subsystem.
+ */
+static int __init add_dataflash(int channel, char *name, int IDsize,
+		int nr_pages, int pagesize, int pageoffset)
+{
+	struct mtd_info *device;
+	struct dataflash_local *priv;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *mtd_parts = 0;
+	int mtd_parts_nr = 0;
+#endif
+
+	if (nr_devices >= DATAFLASH_MAX_DEVICES) {
+		printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
+		return 0;
+	}
+
+	device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
+	if (!device)
+		return -ENOMEM;
+	memset(device, 0, sizeof(struct mtd_info));
+
+	device->name = (char *)&device[1];
+	sprintf(device->name, "%s.spi%d", name, channel);
+	device->size = nr_pages * pagesize;
+	device->erasesize = pagesize;
+	device->writesize = pagesize;
+	device->owner = THIS_MODULE;
+	device->type = MTD_DATAFLASH;
+	device->flags = MTD_WRITEABLE;
+	device->erase = at91_dataflash_erase;
+	device->read = at91_dataflash_read;
+	device->write = at91_dataflash_write;
+
+	priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
+	if (!priv) {
+		kfree(device);
+		return -ENOMEM;
+	}
+	memset(priv, 0, sizeof(struct dataflash_local));
+
+	priv->spi = channel;
+	priv->page_size = pagesize;
+	priv->page_offset = pageoffset;
+	device->priv = priv;
+
+	mtd_devices[nr_devices] = device;
+	nr_devices++;
+	printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
+
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
+#endif
+	if (mtd_parts_nr <= 0) {
+		switch (IDsize) {
+			case SZ_2M:
+				mtd_parts = static_partitions_2M;
+				mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
+				break;
+			case SZ_4M:
+				mtd_parts = static_partitions_4M;
+				mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
+				break;
+			case SZ_8M:
+				mtd_parts = static_partitions_8M;
+				mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
+				break;
+		}
+	}
+
+	if (mtd_parts_nr > 0) {
+#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
+		add_mtd_device(device);
+#endif
+		return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
+	}
+#endif
+	return add_mtd_device(device);		/* add whole device */
+}
+
+/*
+ * Detect and initialize DataFlash device connected to specified SPI channel.
+ *
+ *   Device            Density         ID code                 Nr Pages        Page Size       Page offset
+ *   AT45DB011B        1Mbit   (128K)  xx0011xx (0x0c)         512             264             9
+ *   AT45DB021B        2Mbit   (256K)  xx0101xx (0x14)         1025            264             9
+ *   AT45DB041B        4Mbit   (512K)  xx0111xx (0x1c)         2048            264             9
+ *   AT45DB081B        8Mbit   (1M)    xx1001xx (0x24)         4096            264             9
+ *   AT45DB0161B       16Mbit  (2M)    xx1011xx (0x2c)         4096            528             10
+ *   AT45DB0321B       32Mbit  (4M)    xx1101xx (0x34)         8192            528             10
+ *   AT45DB0642        64Mbit  (8M)    xx1111xx (0x3c)         8192            1056            11
+ *   AT45DB1282        128Mbit (16M)   xx0100xx (0x10)         16384           1056            11
+ */
+static int __init at91_dataflash_detect(int channel)
+{
+	int res = 0;
+	unsigned short status;
+
+	spi_access_bus(channel);
+	status = at91_dataflash_status();
+	spi_release_bus(channel);
+	if (status != 0xff) {			/* no dataflash device there */
+		switch (status & 0x3c) {
+			case 0x0c:	/* 0 0 1 1 */
+				res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
+				break;
+			case 0x14:	/* 0 1 0 1 */
+				res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
+				break;
+			case 0x1c:	/* 0 1 1 1 */
+				res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
+				break;
+			case 0x24:	/* 1 0 0 1 */
+				res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
+				break;
+			case 0x2c:	/* 1 0 1 1 */
+				res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
+				break;
+			case 0x34:	/* 1 1 0 1 */
+				res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
+				break;
+			case 0x3c:	/* 1 1 1 1 */
+				res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
+				break;
+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
+//			case 0x10:	/* 0 1 0 0 */
+//				res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
+//				break;
+			default:
+				printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
+		}
+	}
+
+	return res;
+}
+
+static int __init at91_dataflash_init(void)
+{
+	spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
+	if (!spi_transfer_desc)
+		return -ENOMEM;
+
+	/* DataFlash (SPI chip select 0) */
+	at91_dataflash_detect(0);
+
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card (SPI chip select 3) */
+	at91_dataflash_detect(3);
+#endif
+
+	return 0;
+}
+
+static void __exit at91_dataflash_exit(void)
+{
+	int i;
+
+	for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
+		if (mtd_devices[i]) {
+#ifdef CONFIG_MTD_PARTITIONS
+			del_mtd_partitions(mtd_devices[i]);
+#else
+			del_mtd_device(mtd_devices[i]);
+#endif
+			kfree(mtd_devices[i]->priv);
+			kfree(mtd_devices[i]);
+		}
+	}
+	nr_devices = 0;
+	kfree(spi_transfer_desc);
+}
+
+
+module_init(at91_dataflash_init);
+module_exit(at91_dataflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/Kconfig linux-2.6.20.4-atmel/drivers/mtd/devices/Kconfig
--- linux-2.6.20.4-0rig/drivers/mtd/devices/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mtd/devices/Kconfig	2007-03-24 16:39:15.000000000 +0100
@@ -267,5 +267,11 @@
 	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
 	  you have managed to wipe the first block.
 
-endmenu
+config MTD_AT91_DATAFLASH
+	tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
+	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
+	help
+	  This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
+	  If you have such a board, say 'Y'.
 
+endmenu
diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/Makefile linux-2.6.20.4-atmel/drivers/mtd/devices/Makefile
--- linux-2.6.20.4-0rig/drivers/mtd/devices/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mtd/devices/Makefile	2007-03-24 16:39:15.000000000 +0100
@@ -17,3 +17,4 @@
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
diff -urN linux-2.6.20.4-0rig/drivers/mtd/nand/at91_nand.c linux-2.6.20.4-atmel/drivers/mtd/nand/at91_nand.c
--- linux-2.6.20.4-0rig/drivers/mtd/nand/at91_nand.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/mtd/nand/at91_nand.c	2007-03-24 16:39:15.000000000 +0100
@@ -82,6 +82,10 @@
 		at91_set_gpio_value(host->board->enable_pin, 1);
 }
 
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
 /*
  * Probe for the NAND device.
  */
@@ -151,6 +155,12 @@
 #ifdef CONFIG_MTD_PARTITIONS
 	if (host->board->partition_info)
 		partitions = host->board->partition_info(mtd->size, &num_partitions);
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	else {
+		mtd->name = "at91_nand";
+		num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
+	}
+#endif
 
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
diff -urN linux-2.6.20.4-0rig/drivers/net/arm/at91_ether.c linux-2.6.20.4-atmel/drivers/net/arm/at91_ether.c
--- linux-2.6.20.4-0rig/drivers/net/arm/at91_ether.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/net/arm/at91_ether.c	2007-03-24 16:39:15.000000000 +0100
@@ -943,14 +943,22 @@
 	struct net_device *dev;
 	struct at91_private *lp;
 	unsigned int val;
-	int res;
+	struct resource *res;
+	int ret;
 
 	dev = alloc_etherdev(sizeof(struct at91_private));
 	if (!dev)
 		return -ENOMEM;
 
-	dev->base_addr = AT91_VA_BASE_EMAC;
-	dev->irq = AT91RM9200_ID_EMAC;
+	/* Get I/O base address and IRQ */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		free_netdev(dev);
+		return -ENODEV;
+	}
+	dev->base_addr = res->start;
+	dev->irq = platform_get_irq(pdev, 0);
+
 	SET_MODULE_OWNER(dev);
 
 	/* Install the interrupt handler */
@@ -1023,12 +1031,12 @@
 	lp->phy_address = phy_address;	/* MDI address of PHY */
 
 	/* Register the network interface */
-	res = register_netdev(dev);
-	if (res) {
+	ret = register_netdev(dev);
+	if (ret) {
 		free_irq(dev->irq, dev);
 		free_netdev(dev);
 		dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-		return res;
+		return ret;
 	}
 
 	/* Determine current link speed */
@@ -1103,7 +1111,7 @@
 			case MII_LXT971A_ID:		/* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
 			case MII_RTL8201_ID:		/* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
 			case MII_BCM5221_ID:		/* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
-			case MII_DP83847_ID:		/* National Semiconductor DP83847:  */
+			case MII_DP83847_ID:		/* National Semiconductor DP83847: */
 			case MII_AC101L_ID:		/* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
 			case MII_KS8721_ID:		/* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
 				detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
diff -urN linux-2.6.20.4-0rig/drivers/net/Kconfig linux-2.6.20.4-atmel/drivers/net/Kconfig
--- linux-2.6.20.4-0rig/drivers/net/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/net/Kconfig	2007-03-24 16:39:15.000000000 +0100
@@ -190,7 +190,7 @@
 
 config MACB
 	tristate "Atmel MACB support"
-	depends on NET_ETHERNET && AVR32
+	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
 	select MII
 	help
 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
diff -urN linux-2.6.20.4-0rig/drivers/net/macb.c linux-2.6.20.4-atmel/drivers/net/macb.c
--- linux-2.6.20.4-0rig/drivers/net/macb.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/net/macb.c	2007-03-24 16:42:28.000000000 +0100
@@ -883,27 +883,15 @@
 static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct macb *bp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	ret = mii_ethtool_gset(&bp->mii, cmd);
-	spin_unlock_irqrestore(&bp->lock, flags);
 
-	return ret;
+	return mii_ethtool_gset(&bp->mii, cmd);
 }
 
 static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct macb *bp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	ret = mii_ethtool_sset(&bp->mii, cmd);
-	spin_unlock_irqrestore(&bp->lock, flags);
 
-	return ret;
+	return mii_ethtool_sset(&bp->mii, cmd);
 }
 
 static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
@@ -932,17 +920,11 @@
 static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct macb *bp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
 
 	if (!netif_running(dev))
 		return -EINVAL;
 
-	spin_lock_irqsave(&bp->lock, flags);
-	ret = generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	return ret;
+	return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
 }
 
 static ssize_t macb_mii_show(const struct class_device *cd, char *buf,
@@ -1046,6 +1028,14 @@
 
 	spin_lock_init(&bp->lock);
 
+#if defined(CONFIG_ARCH_AT91)
+	bp->pclk = clk_get(&pdev->dev, "macb_clk");
+	if (IS_ERR(bp->pclk)) {
+		dev_err(&pdev->dev, "failed to get macb_clk\n");
+		goto err_out_free_dev;
+	}
+	clk_enable(bp->pclk);
+#else
 	bp->pclk = clk_get(&pdev->dev, "pclk");
 	if (IS_ERR(bp->pclk)) {
 		dev_err(&pdev->dev, "failed to get pclk\n");
@@ -1059,6 +1049,7 @@
 
 	clk_enable(bp->pclk);
 	clk_enable(bp->hclk);
+#endif
 
 	bp->regs = ioremap(regs->start, regs->end - regs->start + 1);
 	if (!bp->regs) {
@@ -1119,9 +1110,17 @@
 
 	pdata = pdev->dev.platform_data;
 	if (pdata && pdata->is_rmii)
+#if defined(CONFIG_ARCH_AT91)
+		macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+#else
 		macb_writel(bp, USRIO, 0);
+#endif
 	else
+#if defined(CONFIG_ARCH_AT91)
+		macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+#else
 		macb_writel(bp, USRIO, MACB_BIT(MII));
+#endif
 
 	bp->tx_pending = DEF_TX_RING_PENDING;
 
@@ -1148,9 +1147,11 @@
 err_out_iounmap:
 	iounmap(bp->regs);
 err_out_disable_clocks:
+#ifndef CONFIG_ARCH_AT91
 	clk_disable(bp->hclk);
-	clk_disable(bp->pclk);
 	clk_put(bp->hclk);
+#endif
+	clk_disable(bp->pclk);
 err_out_put_pclk:
 	clk_put(bp->pclk);
 err_out_free_dev:
@@ -1173,9 +1174,11 @@
 		unregister_netdev(dev);
 		free_irq(dev->irq, dev);
 		iounmap(bp->regs);
+#ifndef CONFIG_ARCH_AT91
 		clk_disable(bp->hclk);
-		clk_disable(bp->pclk);
 		clk_put(bp->hclk);
+#endif
+		clk_disable(bp->pclk);
 		clk_put(bp->pclk);
 		free_netdev(dev);
 		platform_set_drvdata(pdev, NULL);
diff -urN linux-2.6.20.4-0rig/drivers/net/macb.h linux-2.6.20.4-atmel/drivers/net/macb.h
--- linux-2.6.20.4-0rig/drivers/net/macb.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/net/macb.h	2007-03-24 16:39:15.000000000 +0100
@@ -200,7 +200,7 @@
 #define MACB_SOF_OFFSET				30
 #define MACB_SOF_SIZE				2
 
-/* Bitfields in USRIO */
+/* Bitfields in USRIO (AVR32) */
 #define MACB_MII_OFFSET				0
 #define MACB_MII_SIZE				1
 #define MACB_EAM_OFFSET				1
@@ -210,6 +210,12 @@
 #define MACB_TX_PAUSE_ZERO_OFFSET		3
 #define MACB_TX_PAUSE_ZERO_SIZE			1
 
+/* Bitfields in USRIO (AT91) */
+#define MACB_RMII_OFFSET			0
+#define MACB_RMII_SIZE				1
+#define MACB_CLKEN_OFFSET			1
+#define MACB_CLKEN_SIZE				1
+
 /* Bitfields in WOL */
 #define MACB_IP_OFFSET				0
 #define MACB_IP_SIZE				16
diff -urN linux-2.6.20.4-0rig/drivers/pcmcia/at91_cf.c linux-2.6.20.4-atmel/drivers/pcmcia/at91_cf.c
--- linux-2.6.20.4-0rig/drivers/pcmcia/at91_cf.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/pcmcia/at91_cf.c	2007-03-24 16:39:15.000000000 +0100
@@ -333,20 +333,27 @@
 	struct at91_cf_data	*board = cf->board;
 
 	pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+
 	if (device_may_wakeup(&pdev->dev)) {
 		enable_irq_wake(board->det_pin);
 		if (board->irq_pin)
 			enable_irq_wake(board->irq_pin);
-	} else {
-		disable_irq_wake(board->det_pin);
-		if (board->irq_pin)
-			disable_irq_wake(board->irq_pin);
 	}
+
 	return 0;
 }
 
 static int at91_cf_resume(struct platform_device *pdev)
 {
+	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
+	struct at91_cf_data	*board = cf->board;
+
+	if (device_may_wakeup(&pdev->dev)) {
+		disable_irq_wake(board->det_pin);
+		if (board->irq_pin)
+			disable_irq_wake(board->irq_pin);
+	}
+
 	pcmcia_socket_dev_resume(&pdev->dev);
 	return 0;
 }
diff -urN linux-2.6.20.4-0rig/drivers/serial/atmel_serial.c linux-2.6.20.4-atmel/drivers/serial/atmel_serial.c
--- linux-2.6.20.4-0rig/drivers/serial/atmel_serial.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/serial/atmel_serial.c	2007-03-24 16:42:29.000000000 +0100
@@ -7,6 +7,8 @@
  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *
+ *  DMA support added by Chip Coldwell.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -33,12 +35,14 @@
 #include <linux/sysrq.h>
 #include <linux/tty_flip.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/atmel_pdc.h>
 
 #include <asm/io.h>
 
 #include <asm/mach/serial_at91.h>
 #include <asm/arch/board.h>
-#include <asm/arch/at91_pdc.h>
+
 #ifdef CONFIG_ARM
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
@@ -46,6 +50,11 @@
 
 #include "atmel_serial.h"
 
+#define SUPPORT_PDC
+#define PDC_BUFFER_SIZE		(L1_CACHE_BYTES << 3)
+#warning "Revisit"
+#define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
+
 #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
@@ -73,39 +82,46 @@
 
 #define ATMEL_ISR_PASS_LIMIT	256
 
-#define UART_PUT_CR(port,v)	writel(v, (port)->membase + ATMEL_US_CR)
-#define UART_GET_MR(port)	readl((port)->membase + ATMEL_US_MR)
-#define UART_PUT_MR(port,v)	writel(v, (port)->membase + ATMEL_US_MR)
-#define UART_PUT_IER(port,v)	writel(v, (port)->membase + ATMEL_US_IER)
-#define UART_PUT_IDR(port,v)	writel(v, (port)->membase + ATMEL_US_IDR)
-#define UART_GET_IMR(port)	readl((port)->membase + ATMEL_US_IMR)
-#define UART_GET_CSR(port)	readl((port)->membase + ATMEL_US_CSR)
-#define UART_GET_CHAR(port)	readl((port)->membase + ATMEL_US_RHR)
-#define UART_PUT_CHAR(port,v)	writel(v, (port)->membase + ATMEL_US_THR)
-#define UART_GET_BRGR(port)	readl((port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_BRGR(port,v)	writel(v, (port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_RTOR(port,v)	writel(v, (port)->membase + ATMEL_US_RTOR)
+#define UART_PUT_CR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_CR)
+#define UART_GET_MR(port)	__raw_readl((port)->membase + ATMEL_US_MR)
+#define UART_PUT_MR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_MR)
+#define UART_PUT_IER(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_IER)
+#define UART_PUT_IDR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_IDR)
+#define UART_GET_IMR(port)	__raw_readl((port)->membase + ATMEL_US_IMR)
+#define UART_GET_CSR(port)	__raw_readl((port)->membase + ATMEL_US_CSR)
+#define UART_GET_CHAR(port)	__raw_readl((port)->membase + ATMEL_US_RHR)
+#define UART_PUT_CHAR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_THR)
+#define UART_GET_BRGR(port)	__raw_readl((port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_BRGR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_RTOR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_RTOR)
 
-// #define UART_GET_CR(port)	readl((port)->membase + ATMEL_US_CR)		// is write-only
+// #define UART_GET_CR(port)	__raw_readl((port)->membase + ATMEL_US_CR)		// is write-only
 
  /* PDC registers */
-#define UART_PUT_PTCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_PTCR)
-#define UART_GET_PTSR(port)	readl((port)->membase + ATMEL_PDC_PTSR)
+#define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_PTSR(port)	__raw_readl((port)->membase + ATMEL_PDC_PTSR)
 
-#define UART_PUT_RPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RPR)
-#define UART_GET_RPR(port)	readl((port)->membase + ATMEL_PDC_RPR)
-#define UART_PUT_RCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RCR)
-#define UART_PUT_RNPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RNPR)
-#define UART_PUT_RNCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RNCR)
-
-#define UART_PUT_TPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TPR)
-#define UART_PUT_TCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TCR)
-//#define UART_PUT_TNPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TNPR)
-//#define UART_PUT_TNCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TNCR)
+#define UART_PUT_RPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
+#define UART_GET_RPR(port)	__raw_readl((port)->membase + ATMEL_PDC_RPR)
+#define UART_PUT_RCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
+#define UART_PUT_RNPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
+#define UART_PUT_RNCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
+
+#define UART_PUT_TPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
+#define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+//#define UART_PUT_TNPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
+//#define UART_PUT_TNCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
 
 static int (*atmel_open_hook)(struct uart_port *);
 static void (*atmel_close_hook)(struct uart_port *);
 
+struct atmel_dma_buffer {
+	unsigned char	*buf;
+	dma_addr_t	dma_addr;
+	size_t		dma_size;
+	unsigned int	ofs;
+};
+
 /*
  * We wrap our port structure around the generic uart_port.
  */
@@ -113,10 +129,20 @@
 	struct uart_port	uart;		/* uart */
 	struct clk		*clk;		/* uart clock */
 	unsigned short		suspended;	/* is port suspended? */
+
+	short			use_dma_rx;	/* enable PDC receiver */
+	short			pdc_rx_idx;	/* current PDC RX buffer */
+	struct atmel_dma_buffer	pdc_rx[2];	/* PDC receier */
+
+	short			use_dma_tx;	/* enable PDC transmitter */
+	struct atmel_dma_buffer	pdc_tx;		/* PDC transmitter */
 };
 
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
 
+#define PDC_RX_BUF(port)	&(port)->pdc_rx[(port)->pdc_rx_idx]
+#define PDC_RX_SWITCH(port)	(port)->pdc_rx_idx = !(port)->pdc_rx_idx
+
 #ifdef SUPPORT_SYSRQ
 static struct console atmel_console;
 #endif
@@ -204,7 +230,12 @@
 {
 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 
-	UART_PUT_IDR(port, ATMEL_US_TXRDY);
+	if (atmel_port->use_dma_tx) {
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);		/* disable PDC transmit */
+		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+	}
+	else
+		UART_PUT_IDR(port, ATMEL_US_TXRDY);
 }
 
 /*
@@ -214,7 +245,17 @@
 {
 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 
-	UART_PUT_IER(port, ATMEL_US_TXRDY);
+	if (atmel_port->use_dma_tx) {
+		if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
+			/* The transmitter is already running.  Yes, we
+			   really need this.*/
+			return;
+
+		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);		/* re-enable PDC transmit */
+	}
+	else
+		UART_PUT_IER(port, ATMEL_US_TXRDY);
 }
 
 /*
@@ -224,7 +265,12 @@
 {
 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 
-	UART_PUT_IDR(port, ATMEL_US_RXRDY);
+	if (atmel_port->use_dma_rx) {
+		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);		/* disable PDC receive */
+		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+	}
+	else
+		UART_PUT_IDR(port, ATMEL_US_RXRDY);
 }
 
 /*
@@ -247,6 +293,134 @@
 }
 
 /*
+ * Receive data via the PDC.  A buffer has been fulled.
+ */
+static void atmel_pdc_endrx(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct tty_struct *tty = port->info->tty;
+	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
+	unsigned int count;
+
+	count = pdc->dma_size - pdc->ofs;
+	if (likely(count > 0)) {
+		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
+		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
+		tty_flip_buffer_push(tty);
+
+		port->icount.rx += count;
+	}
+
+	/* Set this buffer as the next receive buffer */
+	pdc->ofs = 0;
+	UART_PUT_RNPR(port, pdc->dma_addr);
+	UART_PUT_RNCR(port, pdc->dma_size);
+
+	/* Switch to next buffer */
+	PDC_RX_SWITCH(atmel_port);		/* next PDC buffer */
+}
+
+/*
+ * Receive data via the PDC.  At least one byte was received, but the
+ * buffer was not full when the inter-character timeout expired.
+ */
+static void atmel_pdc_timeout(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct tty_struct *tty = port->info->tty;
+	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
+	/* unsigned */ int ofs, count;
+
+	ofs = UART_GET_RPR(port) - pdc->dma_addr;	/* current DMA adress */
+	count = ofs - pdc->ofs;
+
+	if (likely(count > 0)) {
+		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
+		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
+		tty_flip_buffer_push(tty);
+
+		pdc->ofs = ofs;
+		port->icount.rx += count;
+	}
+
+	/* reset the UART timeout */
+	UART_PUT_CR(port, ATMEL_US_STTTO);
+}
+
+/*
+ * Deal with parity, framing and overrun errors.
+ */
+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
+{
+	/* clear error */
+	UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
+	if (status & ATMEL_US_RXBRK) {
+		status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
+		port->icount.brk++;
+	}
+	if (status & ATMEL_US_PARE)
+		port->icount.parity++;
+	if (status & ATMEL_US_FRAME)
+		port->icount.frame++;
+	if (status & ATMEL_US_OVRE)
+		port->icount.overrun++;
+}
+
+/*
+ * A transmission via the PDC is complete.
+ */
+static void atmel_pdc_endtx(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct circ_buf *xmit = &port->info->xmit;
+	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
+	xmit->tail += pdc->ofs;
+	if (xmit->tail >= SERIAL_XMIT_SIZE)
+		xmit->tail -= SERIAL_XMIT_SIZE;
+
+	port->icount.tx += pdc->ofs;
+	pdc->ofs = 0;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+/*
+ * The PDC transmitter is idle, so either start the next transfer or
+ * disable the transmitter.
+ */
+static void atmel_pdc_txbufe(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct circ_buf *xmit = &port->info->xmit;
+	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+	int count;
+
+	if (!uart_circ_empty(xmit)) {
+		/* more to transmit - setup next transfer */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);			/* disable PDC transmit */
+		dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
+
+		if (xmit->tail < xmit->head)
+			count = xmit->head - xmit->tail;
+		else
+			count = SERIAL_XMIT_SIZE - xmit->tail;
+		pdc->ofs = count;
+
+		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
+		UART_PUT_TCR(port, count);
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);			/* re-enable PDC transmit */
+	}
+	else {
+		/* nothing left to transmit - disable the transmitter */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);			/* disable PDC transmit */
+		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+	}
+}
+
+/*
  * Characters received (called from interrupt handler)
  */
 static void atmel_rx_chars(struct uart_port *port)
@@ -348,6 +522,14 @@
 	status = UART_GET_CSR(port);
 	pending = status & UART_GET_IMR(port);
 	while (pending) {
+		/* PDC receive */
+		if (pending & ATMEL_US_ENDRX)
+			atmel_pdc_endrx(port);
+		if (pending & ATMEL_US_TIMEOUT)
+			atmel_pdc_timeout(port);
+		if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
+			atmel_pdc_rxerr(port, pending);
+
 		/* Interrupt receive */
 		if (pending & ATMEL_US_RXRDY)
 			atmel_rx_chars(port);
@@ -362,6 +544,12 @@
 		if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
 			wake_up_interruptible(&port->info->delta_msr_wait);
 
+		/* PDC transmit */
+		if (pending & ATMEL_US_ENDTX)
+			atmel_pdc_endtx(port);
+		if (pending & ATMEL_US_TXBUFE)
+			atmel_pdc_txbufe(port);
+
 		/* Interrupt transmit */
 		if (pending & ATMEL_US_TXRDY)
 			atmel_tx_chars(port);
@@ -400,6 +588,47 @@
 	}
 
 	/*
+	 * Initialize DMA (if necessary)
+	 */
+	if (atmel_port->use_dma_rx) {
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+			pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
+			if (pdc->buf == NULL) {
+				if (i != 0) {
+					dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
+					kfree(atmel_port->pdc_rx[0].buf);
+				}
+				free_irq(port->irq, port);
+				return -ENOMEM;
+			}
+			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
+			pdc->dma_size = PDC_BUFFER_SIZE;
+			pdc->ofs = 0;
+		}
+
+		atmel_port->pdc_rx_idx = 0;
+
+		UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
+		UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+
+		UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
+		UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
+	}
+	if (atmel_port->use_dma_tx) {
+		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+		struct circ_buf *xmit = &port->info->xmit;
+
+		pdc->buf = xmit->buf;
+		pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
+		pdc->dma_size = SERIAL_XMIT_SIZE;
+		pdc->ofs = 0;
+	}
+
+	/*
 	 * If there is a specific "open" function (to register
 	 * control line interrupts)
 	 */
@@ -417,7 +646,15 @@
 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);		/* enable xmit & rcvr */
 
-	UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
+	if (atmel_port->use_dma_rx) {
+		UART_PUT_RTOR(port, PDC_RX_TIMEOUT);		/* set UART timeout */
+		UART_PUT_CR(port, ATMEL_US_STTTO);
+
+		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+		UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);		/* enable PDC controller */
+	}
+	else
+		UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
 
 	return 0;
 }
@@ -430,6 +667,25 @@
 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 
 	/*
+	 * Shut-down the DMA.
+	 */
+	if (atmel_port->use_dma_rx) {
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+			dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
+			kfree(pdc->buf);
+		}
+	}
+	if (atmel_port->use_dma_tx) {
+		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
+		dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
+	}
+
+	/*
 	 * Disable all interrupts, port and break condition.
 	 */
 	UART_PUT_CR(port, ATMEL_US_RSTSTA);
@@ -480,6 +736,7 @@
  */
 static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
 {
+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 	unsigned long flags;
 	unsigned int mode, imr, quot, baud;
 
@@ -533,6 +790,9 @@
 	if (termios->c_iflag & (BRKINT | PARMRK))
 		port->read_status_mask |= ATMEL_US_RXBRK;
 
+	if (atmel_port->use_dma_rx)	/* need to enable error interrupts */
+		UART_PUT_IER(port, port->read_status_mask);
+
 	/*
 	 * Characters to ignore
 	 */
@@ -711,6 +971,11 @@
 		clk_enable(atmel_port->clk);
 		port->uartclk = clk_get_rate(atmel_port->clk);
 	}
+
+#ifdef SUPPORT_PDC
+	atmel_port->use_dma_rx = data->use_dma_rx;
+	atmel_port->use_dma_tx = data->use_dma_tx;
+#endif
 }
 
 /*
diff -urN linux-2.6.20.4-0rig/drivers/spi/atmel_spi.c linux-2.6.20.4-atmel/drivers/spi/atmel_spi.c
--- linux-2.6.20.4-0rig/drivers/spi/atmel_spi.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/spi/atmel_spi.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,699 @@
+/*
+ * Driver for Atmel AT32 and AT91 SPI Controllers
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#ifdef CONFIG_ARCH_AT91
+#include <asm/arch/cpu.h>
+#endif
+
+#include "atmel_spi.h"
+
+/*
+ * The core SPI transfer engine just talks to a register bank to set up
+ * DMA transfers; transfer queue progress is driven by IRQs.  The clock
+ * framework provides the base clock, subdivided for each spi_device.
+ *
+ * Newer controllers, marked with "new_1" flag, have:
+ *  - CR.LASTXFER
+ *  - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
+ *  - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
+ *  - SPI_CSRx.CSAAT
+ *  - SPI_CSRx.SBCR allows faster clocking
+ */
+struct atmel_spi {
+	spinlock_t		lock;
+
+	void __iomem		*regs;
+	int			irq;
+	struct clk		*clk;
+	struct platform_device	*pdev;
+	unsigned		new_1:1;
+
+	u8			stopping;
+	struct list_head	queue;
+	struct spi_transfer	*current_transfer;
+	unsigned long		remaining_bytes;
+
+	void			*buffer;
+	dma_addr_t		buffer_dma;
+};
+
+#define BUFFER_SIZE		PAGE_SIZE
+#define INVALID_DMA_ADDRESS	0xffffffff
+
+/*
+ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
+ * they assume that spi slave device state will not change on deselect, so
+ * that automagic deselection is OK.  Not so!  Workaround uses nCSx pins
+ * as GPIOs; or newer controllers have CSAAT and friends.
+ *
+ * Since the CSAAT functionality is a bit weird on newer controllers
+ * as well, we use GPIO to control nCSx pins on all controllers.
+ */
+
+static inline void cs_activate(struct spi_device *spi)
+{
+	unsigned gpio = (unsigned) spi->controller_data;
+	unsigned active = spi->mode & SPI_CS_HIGH;
+
+	dev_dbg(&spi->dev, "activate %u%s\n", gpio, active ? " (high)" : "");
+#ifdef CONFIG_ARCH_AT91
+	at91_set_gpio_value(gpio, active);
+#else
+	gpio_set_value(gpio, active);
+#endif
+}
+
+static inline void cs_deactivate(struct spi_device *spi)
+{
+	unsigned gpio = (unsigned) spi->controller_data;
+	unsigned active = spi->mode & SPI_CS_HIGH;
+
+	dev_dbg(&spi->dev, "DEactivate %u%s\n", gpio, active ? " (low)" : "");
+#ifdef CONFIG_ARCH_AT91
+	at91_set_gpio_value(gpio, !active);
+#else
+	gpio_set_value(gpio, !active);
+#endif
+}
+
+/*
+ * Submit next transfer for DMA.
+ * lock is held, spi irq is blocked
+ */
+static void atmel_spi_next_xfer(struct spi_master *master,
+				struct spi_message *msg)
+{
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+	struct spi_transfer	*xfer;
+	u32			len;
+	dma_addr_t		tx_dma, rx_dma;
+
+	xfer = as->current_transfer;
+	if (!xfer || as->remaining_bytes == 0) {
+		if (xfer)
+			xfer = list_entry(xfer->transfer_list.next,
+					struct spi_transfer, transfer_list);
+		else
+			xfer = list_entry(msg->transfers.next,
+					struct spi_transfer, transfer_list);
+		as->remaining_bytes = xfer->len;
+		as->current_transfer = xfer;
+	}
+
+	len = as->remaining_bytes;
+
+	tx_dma = xfer->tx_dma;
+	rx_dma = xfer->rx_dma;
+
+	/* use scratch buffer only when rx or tx data is unspecified */
+	if (rx_dma == INVALID_DMA_ADDRESS) {
+		rx_dma = as->buffer_dma;
+		if (len > BUFFER_SIZE)
+			len = BUFFER_SIZE;
+	}
+	if (tx_dma == INVALID_DMA_ADDRESS) {
+		tx_dma = as->buffer_dma;
+		if (len > BUFFER_SIZE)
+			len = BUFFER_SIZE;
+		memset(as->buffer, 0, len);
+		dma_sync_single_for_device(&as->pdev->dev,
+				as->buffer_dma, len, DMA_TO_DEVICE);
+	}
+
+	spi_writel(as, RPR, rx_dma);
+	spi_writel(as, TPR, tx_dma);
+
+	as->remaining_bytes -= len;
+	if (msg->spi->bits_per_word > 8)
+		len >>= 1;
+
+	/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
+	 * mechanism might help avoid the IRQ latency between transfers
+	 *
+	 * We're also waiting for ENDRX before we start the next
+	 * transfer because we need to handle some difficult timing
+	 * issues otherwise. If we wait for ENDTX in one transfer and
+	 * then starts waiting for ENDRX in the next, it's difficult
+	 * to tell the difference between the ENDRX interrupt we're
+	 * actually waiting for and the ENDRX interrupt of the
+	 * previous transfer.
+	 *
+	 * It should be doable, though. Just not now...
+	 */
+	spi_writel(as, TNCR, 0);
+	spi_writel(as, RNCR, 0);
+	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+
+	dev_dbg(&msg->spi->dev,
+		"  start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
+		xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+		xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
+
+	wmb();
+	spi_writel(as, TCR, len);
+	spi_writel(as, RCR, len);
+	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+}
+
+static void atmel_spi_next_message(struct spi_master *master)
+{
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+	struct spi_message	*msg;
+	u32			mr;
+
+	BUG_ON(as->current_transfer);
+
+	msg = list_entry(as->queue.next, struct spi_message, queue);
+
+	/* Select the chip */
+	mr = spi_readl(as, MR);
+	mr = SPI_BFINS(PCS, ~(1 << msg->spi->chip_select), mr);
+	spi_writel(as, MR, mr);
+	cs_activate(msg->spi);
+
+	atmel_spi_next_xfer(master, msg);
+}
+
+static void
+atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+	xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
+	if (xfer->tx_buf)
+		xfer->tx_dma = dma_map_single(&as->pdev->dev,
+				(void *) xfer->tx_buf, xfer->len,
+				DMA_TO_DEVICE);
+	if (xfer->rx_buf)
+		xfer->rx_dma = dma_map_single(&as->pdev->dev,
+				xfer->rx_buf, xfer->len,
+				DMA_FROM_DEVICE);
+}
+
+static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
+				     struct spi_transfer *xfer)
+{
+	if (xfer->tx_dma != INVALID_DMA_ADDRESS)
+		dma_unmap_single(master->cdev.dev, xfer->tx_dma,
+				 xfer->len, DMA_TO_DEVICE);
+	if (xfer->rx_dma != INVALID_DMA_ADDRESS)
+		dma_unmap_single(master->cdev.dev, xfer->rx_dma,
+				 xfer->len, DMA_FROM_DEVICE);
+}
+
+static void
+atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
+		   struct spi_message *msg, int status)
+{
+	cs_deactivate(msg->spi);
+	list_del(&msg->queue);
+	msg->status = status;
+
+	dev_dbg(master->cdev.dev,
+		"xfer complete: %u bytes transferred\n",
+		msg->actual_length);
+
+	spin_unlock(&as->lock);
+	msg->complete(msg->context);
+	spin_lock(&as->lock);
+
+	as->current_transfer = NULL;
+
+	/* continue if needed */
+	if (list_empty(&as->queue) || as->stopping)
+		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+	else
+		atmel_spi_next_message(master);
+}
+
+static irqreturn_t
+atmel_spi_interrupt(int irq, void *dev_id)
+{
+	struct spi_master	*master = dev_id;
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+	struct spi_message	*msg;
+	struct spi_transfer	*xfer;
+	u32			status, pending, imr;
+	int			ret = IRQ_NONE;
+
+	spin_lock(&as->lock);
+
+	xfer = as->current_transfer;
+	msg = list_entry(as->queue.next, struct spi_message, queue);
+
+	imr = spi_readl(as, IMR);
+	status = spi_readl(as, SR);
+	pending = status & imr;
+
+	if (pending & SPI_BIT(OVRES)) {
+		int timeout;
+
+		ret = IRQ_HANDLED;
+
+		spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX)
+				     | SPI_BIT(OVRES)));
+
+		/*
+		 * When we get an overrun, we disregard the current
+		 * transfer. Data will not be copied back from any
+		 * bounce buffer and msg->actual_len will not be
+		 * updated with the last xfer.
+		 *
+		 * We will also not process any remaning transfers in
+		 * the message.
+		 *
+		 * First, stop the transfer and unmap the DMA buffers.
+		 */
+		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+		if (!msg->is_dma_mapped)
+			atmel_spi_dma_unmap_xfer(master, xfer);
+
+		/* REVISIT: udelay in irq is unfriendly */
+		if (xfer->delay_usecs)
+			udelay(xfer->delay_usecs);
+
+		dev_warn(master->cdev.dev, "fifo overrun (%u/%u remaining)\n",
+			 spi_readl(as, TCR), spi_readl(as, RCR));
+
+		/*
+		 * Clean up DMA registers and make sure the data
+		 * registers are empty.
+		 */
+		spi_writel(as, RNCR, 0);
+		spi_writel(as, TNCR, 0);
+		spi_writel(as, RCR, 0);
+		spi_writel(as, TCR, 0);
+		for (timeout = 1000; timeout; timeout--)
+			if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
+				break;
+		if (!timeout)
+			dev_warn(master->cdev.dev,
+				 "timeout waiting for TXEMPTY");
+		while (spi_readl(as, SR) & SPI_BIT(RDRF))
+			spi_readl(as, RDR);
+
+		/* Clear any overrun happening while cleaning up */
+		spi_readl(as, SR);
+
+		atmel_spi_msg_done(master, as, msg, -EIO);
+	} else if (pending & SPI_BIT(ENDRX)) {
+		ret = IRQ_HANDLED;
+
+		spi_writel(as, IDR, pending);
+
+		if (as->remaining_bytes == 0) {
+			msg->actual_length += xfer->len;
+
+			if (!msg->is_dma_mapped)
+				atmel_spi_dma_unmap_xfer(master, xfer);
+
+			/* REVISIT: udelay in irq is unfriendly */
+			if (xfer->delay_usecs)
+				udelay(xfer->delay_usecs);
+
+			if (msg->transfers.prev == &xfer->transfer_list) {
+				/* report completed message */
+				atmel_spi_msg_done(master, as, msg, 0);
+			} else {
+				if (xfer->cs_change) {
+					cs_deactivate(msg->spi);
+					udelay(1);
+					cs_activate(msg->spi);
+				}
+
+				/*
+				 * Not done yet. Submit the next transfer.
+				 *
+				 * FIXME handle protocol options for xfer
+				 */
+				atmel_spi_next_xfer(master, msg);
+			}
+		} else {
+			/*
+			 * Keep going, we still have data to send in
+			 * the current transfer.
+			 */
+			atmel_spi_next_xfer(master, msg);
+		}
+	}
+
+	spin_unlock(&as->lock);
+
+	return ret;
+}
+
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
+
+static int atmel_spi_setup(struct spi_device *spi)
+{
+	struct atmel_spi	*as;
+	u32			scbr, csr;
+	unsigned int		bits = spi->bits_per_word;
+	unsigned long		bus_hz, sck_hz;
+	unsigned int		npcs_pin;
+	int			ret;
+
+	as = spi_master_get_devdata(spi->master);
+
+	if (as->stopping)
+		return -ESHUTDOWN;
+
+	if (spi->chip_select > spi->master->num_chipselect) {
+		dev_dbg(&spi->dev,
+				"setup: invalid chipselect %u (%u defined)\n",
+				spi->chip_select, spi->master->num_chipselect);
+		return -EINVAL;
+	}
+
+	if (bits == 0)
+		bits = 8;
+	if (bits < 8 || bits > 16) {
+		dev_dbg(&spi->dev,
+				"setup: invalid bits_per_word %u (8 to 16)\n",
+				bits);
+		return -EINVAL;
+	}
+
+	if (spi->mode & ~MODEBITS) {
+		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+			spi->mode & ~MODEBITS);
+		return -EINVAL;
+	}
+
+	/* speed zero convention is used by some upper layers */
+	bus_hz = clk_get_rate(as->clk);
+	if (spi->max_speed_hz) {
+		/* assume div32/fdiv/mbz == 0 */
+		if (!as->new_1)
+			bus_hz /= 2;
+		scbr = ((bus_hz + spi->max_speed_hz - 1)
+			/ spi->max_speed_hz);
+		if (scbr >= (1 << SPI_SCBR_SIZE)) {
+			dev_dbg(&spi->dev, "setup: %d Hz too slow, scbr %u\n",
+					spi->max_speed_hz, scbr);
+			return -EINVAL;
+		}
+	} else
+		scbr = 0xff;
+	sck_hz = bus_hz / scbr;
+
+	csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8);
+	if (spi->mode & SPI_CPOL)
+		csr |= SPI_BIT(CPOL);
+	if (!(spi->mode & SPI_CPHA))
+		csr |= SPI_BIT(NCPHA);
+
+	/* TODO: DLYBS and DLYBCT */
+	csr |= SPI_BF(DLYBS, 10);
+	csr |= SPI_BF(DLYBCT, 10);
+
+	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+	npcs_pin = (unsigned int)spi->controller_data;
+	if (!spi->controller_state) {
+#ifndef CONFIG_ARCH_AT91
+		ret = gpio_request(npcs_pin, "spi_npcs");
+		if (ret)
+			return ret;
+#endif
+		spi->controller_state = (void *)npcs_pin;
+#ifdef CONFIG_ARCH_AT91
+		at91_set_gpio_output(npcs_pin, 0);
+#else
+		gpio_direction_output(npcs_pin);
+#endif
+	}
+
+	dev_dbg(&spi->dev,
+		"setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
+		sck_hz, bits, spi->mode, spi->chip_select, csr);
+
+	spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+
+	return 0;
+}
+
+static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct atmel_spi	*as;
+	struct spi_transfer	*xfer;
+	unsigned long		flags;
+	struct device		*controller = spi->master->cdev.dev;
+
+	as = spi_master_get_devdata(spi->master);
+
+	dev_dbg(controller, "new message %p submitted for %s\n",
+			msg, spi->dev.bus_id);
+
+	if (unlikely(list_empty(&msg->transfers)
+			|| !spi->max_speed_hz))
+		return -EINVAL;
+
+	if (as->stopping)
+		return -ESHUTDOWN;
+
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		if (!(xfer->tx_buf || xfer->rx_buf)) {
+			dev_dbg(&spi->dev, "missing rx or tx buf\n");
+			return -EINVAL;
+		}
+
+		/* FIXME implement these protocol options!! */
+		if (xfer->bits_per_word || xfer->speed_hz) {
+			dev_dbg(&spi->dev, "no protocol options yet\n");
+			return -ENOPROTOOPT;
+		}
+	}
+
+	/* scrub dcache "early" */
+	if (!msg->is_dma_mapped) {
+		list_for_each_entry(xfer, &msg->transfers, transfer_list)
+			atmel_spi_dma_map_xfer(as, xfer);
+	}
+
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		dev_dbg(controller,
+			"  xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+			xfer, xfer->len,
+			xfer->tx_buf, xfer->tx_dma,
+			xfer->rx_buf, xfer->rx_dma);
+	}
+
+	msg->status = -EINPROGRESS;
+	msg->actual_length = 0;
+
+	spin_lock_irqsave(&as->lock, flags);
+	list_add_tail(&msg->queue, &as->queue);
+	if (!as->current_transfer)
+		atmel_spi_next_message(spi->master);
+	spin_unlock_irqrestore(&as->lock, flags);
+
+	return 0;
+}
+
+static void atmel_spi_cleanup(const struct spi_device *spi)
+{
+#ifndef CONFIG_ARCH_AT91
+	if (spi->controller_state)
+		gpio_free((unsigned int)spi->controller_data);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init atmel_spi_probe(struct platform_device *pdev)
+{
+	struct resource		*regs;
+	int			irq;
+	struct clk		*clk;
+	int			ret;
+	struct spi_master	*master;
+	struct atmel_spi	*as;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	clk = clk_get(&pdev->dev, "spi_clk");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/* setup spi core then atmel-specific driver state */
+	ret = -ENOMEM;
+	master = spi_alloc_master(&pdev->dev, sizeof *as);
+	if (!master)
+		goto out_free;
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = 4;
+	master->setup = atmel_spi_setup;
+	master->transfer = atmel_spi_transfer;
+	master->cleanup = atmel_spi_cleanup;
+	platform_set_drvdata(pdev, master);
+
+	as = spi_master_get_devdata(master);
+
+	as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
+					&as->buffer_dma, GFP_KERNEL);
+	if (!as->buffer)
+		goto out_free;
+
+	spin_lock_init(&as->lock);
+	INIT_LIST_HEAD(&as->queue);
+	as->pdev = pdev;
+	as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
+	if (!as->regs)
+		goto out_free_buffer;
+	as->irq = irq;
+	as->clk = clk;
+#ifdef CONFIG_ARCH_AT91
+	if (!cpu_is_at91rm9200())
+		as->new_1 = 1;
+#endif
+
+	ret = request_irq(irq, atmel_spi_interrupt, 0,
+			pdev->dev.bus_id, master);
+	if (ret)
+		goto out_unmap_regs;
+
+	/* Initialize the hardware */
+	clk_enable(clk);
+	spi_writel(as, CR, SPI_BIT(SWRST));
+	spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
+	spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+	spi_writel(as, CR, SPI_BIT(SPIEN));
+
+	/* go! */
+	dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
+			(unsigned long)regs->start, irq);
+
+	ret = spi_register_master(master);
+	if (ret)
+		goto out_reset_hw;
+
+	return 0;
+
+out_reset_hw:
+	spi_writel(as, CR, SPI_BIT(SWRST));
+	clk_disable(clk);
+	free_irq(irq, master);
+out_unmap_regs:
+	iounmap(as->regs);
+out_free_buffer:
+	dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
+			as->buffer_dma);
+out_free:
+	clk_put(clk);
+	spi_master_put(master);
+	return ret;
+}
+
+static int __exit atmel_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+	struct spi_message	*msg;
+
+	/* reset the hardware and block queue progress */
+	spin_lock_irq(&as->lock);
+	as->stopping = 1;
+	spi_writel(as, CR, SPI_BIT(SWRST));
+	spi_readl(as, SR);
+	spin_unlock_irq(&as->lock);
+
+	/* Terminate remaining queued transfers */
+	list_for_each_entry(msg, &as->queue, queue) {
+		/* REVISIT unmapping the dma is a NOP on ARM and AVR32
+		 * but we shouldn't depend on that...
+		 */
+		msg->status = -ESHUTDOWN;
+		msg->complete(msg->context);
+	}
+
+	dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
+			as->buffer_dma);
+
+	clk_disable(as->clk);
+	clk_put(as->clk);
+	free_irq(as->irq, master);
+	iounmap(as->regs);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+
+	clk_disable(as->clk);
+	return 0;
+}
+
+static int atmel_spi_resume(struct platform_device *pdev)
+{
+	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+
+	clk_enable(as->clk);
+	return 0;
+}
+
+#else
+#define	atmel_spi_suspend	NULL
+#define	atmel_spi_resume	NULL
+#endif
+
+
+static struct platform_driver atmel_spi_driver = {
+	.driver		= {
+		.name	= "atmel_spi",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= atmel_spi_suspend,
+	.resume		= atmel_spi_resume,
+	.remove		= __exit_p(atmel_spi_remove),
+};
+
+static int __init atmel_spi_init(void)
+{
+	return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
+}
+module_init(atmel_spi_init);
+
+static void __exit atmel_spi_exit(void)
+{
+	platform_driver_unregister(&atmel_spi_driver);
+}
+module_exit(atmel_spi_exit);
+
+MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/spi/atmel_spi.h linux-2.6.20.4-atmel/drivers/spi/atmel_spi.h
--- linux-2.6.20.4-0rig/drivers/spi/atmel_spi.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/spi/atmel_spi.h	2007-03-24 16:43:57.000000000 +0100
@@ -0,0 +1,167 @@
+/*
+ * Register definitions for Atmel Serial Peripheral Interface (SPI)
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ATMEL_SPI_H__
+#define __ATMEL_SPI_H__
+
+/* SPI register offsets */
+#define SPI_CR					0x0000
+#define SPI_MR					0x0004
+#define SPI_RDR					0x0008
+#define SPI_TDR					0x000c
+#define SPI_SR					0x0010
+#define SPI_IER					0x0014
+#define SPI_IDR					0x0018
+#define SPI_IMR					0x001c
+#define SPI_CSR0				0x0030
+#define SPI_CSR1				0x0034
+#define SPI_CSR2				0x0038
+#define SPI_CSR3				0x003c
+#define SPI_RPR					0x0100
+#define SPI_RCR					0x0104
+#define SPI_TPR					0x0108
+#define SPI_TCR					0x010c
+#define SPI_RNPR				0x0110
+#define SPI_RNCR				0x0114
+#define SPI_TNPR				0x0118
+#define SPI_TNCR				0x011c
+#define SPI_PTCR				0x0120
+#define SPI_PTSR				0x0124
+
+/* Bitfields in CR */
+#define SPI_SPIEN_OFFSET			0
+#define SPI_SPIEN_SIZE				1
+#define SPI_SPIDIS_OFFSET			1
+#define SPI_SPIDIS_SIZE				1
+#define SPI_SWRST_OFFSET			7
+#define SPI_SWRST_SIZE				1
+#define SPI_LASTXFER_OFFSET			24
+#define SPI_LASTXFER_SIZE			1
+
+/* Bitfields in MR */
+#define SPI_MSTR_OFFSET				0
+#define SPI_MSTR_SIZE				1
+#define SPI_PS_OFFSET				1
+#define SPI_PS_SIZE				1
+#define SPI_PCSDEC_OFFSET			2
+#define SPI_PCSDEC_SIZE				1
+#define SPI_FDIV_OFFSET				3
+#define SPI_FDIV_SIZE				1
+#define SPI_MODFDIS_OFFSET			4
+#define SPI_MODFDIS_SIZE			1
+#define SPI_LLB_OFFSET				7
+#define SPI_LLB_SIZE				1
+#define SPI_PCS_OFFSET				16
+#define SPI_PCS_SIZE				4
+#define SPI_DLYBCS_OFFSET			24
+#define SPI_DLYBCS_SIZE				8
+
+/* Bitfields in RDR */
+#define SPI_RD_OFFSET				0
+#define SPI_RD_SIZE				16
+
+/* Bitfields in TDR */
+#define SPI_TD_OFFSET				0
+#define SPI_TD_SIZE				16
+
+/* Bitfields in SR */
+#define SPI_RDRF_OFFSET				0
+#define SPI_RDRF_SIZE				1
+#define SPI_TDRE_OFFSET				1
+#define SPI_TDRE_SIZE				1
+#define SPI_MODF_OFFSET				2
+#define SPI_MODF_SIZE				1
+#define SPI_OVRES_OFFSET			3
+#define SPI_OVRES_SIZE				1
+#define SPI_ENDRX_OFFSET			4
+#define SPI_ENDRX_SIZE				1
+#define SPI_ENDTX_OFFSET			5
+#define SPI_ENDTX_SIZE				1
+#define SPI_RXBUFF_OFFSET			6
+#define SPI_RXBUFF_SIZE				1
+#define SPI_TXBUFE_OFFSET			7
+#define SPI_TXBUFE_SIZE				1
+#define SPI_NSSR_OFFSET				8
+#define SPI_NSSR_SIZE				1
+#define SPI_TXEMPTY_OFFSET			9
+#define SPI_TXEMPTY_SIZE			1
+#define SPI_SPIENS_OFFSET			16
+#define SPI_SPIENS_SIZE				1
+
+/* Bitfields in CSR0 */
+#define SPI_CPOL_OFFSET				0
+#define SPI_CPOL_SIZE				1
+#define SPI_NCPHA_OFFSET			1
+#define SPI_NCPHA_SIZE				1
+#define SPI_CSAAT_OFFSET			3
+#define SPI_CSAAT_SIZE				1
+#define SPI_BITS_OFFSET				4
+#define SPI_BITS_SIZE				4
+#define SPI_SCBR_OFFSET				8
+#define SPI_SCBR_SIZE				8
+#define SPI_DLYBS_OFFSET			16
+#define SPI_DLYBS_SIZE				8
+#define SPI_DLYBCT_OFFSET			24
+#define SPI_DLYBCT_SIZE				8
+
+/* Bitfields in RCR */
+#define SPI_RXCTR_OFFSET			0
+#define SPI_RXCTR_SIZE				16
+
+/* Bitfields in TCR */
+#define SPI_TXCTR_OFFSET			0
+#define SPI_TXCTR_SIZE				16
+
+/* Bitfields in RNCR */
+#define SPI_RXNCR_OFFSET			0
+#define SPI_RXNCR_SIZE				16
+
+/* Bitfields in TNCR */
+#define SPI_TXNCR_OFFSET			0
+#define SPI_TXNCR_SIZE				16
+
+/* Bitfields in PTCR */
+#define SPI_RXTEN_OFFSET			0
+#define SPI_RXTEN_SIZE				1
+#define SPI_RXTDIS_OFFSET			1
+#define SPI_RXTDIS_SIZE				1
+#define SPI_TXTEN_OFFSET			8
+#define SPI_TXTEN_SIZE				1
+#define SPI_TXTDIS_OFFSET			9
+#define SPI_TXTDIS_SIZE				1
+
+/* Constants for BITS */
+#define SPI_BITS_8_BPT				0
+#define SPI_BITS_9_BPT				1
+#define SPI_BITS_10_BPT				2
+#define SPI_BITS_11_BPT				3
+#define SPI_BITS_12_BPT				4
+#define SPI_BITS_13_BPT				5
+#define SPI_BITS_14_BPT				6
+#define SPI_BITS_15_BPT				7
+#define SPI_BITS_16_BPT				8
+
+/* Bit manipulation macros */
+#define SPI_BIT(name) \
+	(1 << SPI_##name##_OFFSET)
+#define SPI_BF(name,value) \
+	(((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
+#define SPI_BFEXT(name,value) \
+	(((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
+#define SPI_BFINS(name,value,old) \
+	( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
+	  | SPI_BF(name,value))
+
+/* Register access macros */
+#define spi_readl(port,reg) \
+	__raw_readl((port)->regs + SPI_##reg)
+#define spi_writel(port,reg,value) \
+	__raw_writel((value), (port)->regs + SPI_##reg)
+
+#endif /* __ATMEL_SPI_H__ */
diff -urN linux-2.6.20.4-0rig/drivers/spi/Kconfig linux-2.6.20.4-atmel/drivers/spi/Kconfig
--- linux-2.6.20.4-0rig/drivers/spi/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/spi/Kconfig	2007-03-24 16:43:49.000000000 +0100
@@ -51,6 +51,21 @@
 comment "SPI Master Controller Drivers"
 	depends on SPI_MASTER
 
+config SPI_ATMEL
+	tristate "Atmel SPI Controller"
+	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
+	select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
+	help
+	  This selects a driver for the Atmel SPI Controller, present on
+	  many AT32 (AVR32) and AT91 (ARM) chips.
+
+config SPI_ATMEL
+	tristate "Atmel SPI Controller"
+	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
+	help
+	  This selects a driver for the Atmel SPI Controller, present on
+	  many AT32 (AVR32) and AT91 (ARM) chips.
+
 config SPI_BITBANG
 	tristate "Bitbanging SPI master"
 	depends on SPI_MASTER && EXPERIMENTAL
@@ -75,6 +90,24 @@
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
+config SPI_AT91
+	tristate "AT91RM9200 Bitbang SPI Master"
+	depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
+	select SPI_BITBANG
+	select SPI_AT91_MANUAL_CS
+	help
+	  This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
+	  The SPI_ATMEL driver will be its replacement, using the native
+	  SPI hardware and its DMA controller.
+
+config SPI_AT91_MANUAL_CS
+	bool
+	depends on ARCH_AT91RM9200
+	help
+	  Works around an AT91RM9200 problem whereby the SPI chip-select
+	  will be wrongly disabled.  The workaround uses those pins as
+	  GPIOs instead of letting the SPI controller manage them.
+
 config SPI_MPC83xx
 	tristate "Freescale MPC83xx SPI controller"
 	depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
diff -urN linux-2.6.20.4-0rig/drivers/spi/Makefile linux-2.6.20.4-atmel/drivers/spi/Makefile
--- linux-2.6.20.4-0rig/drivers/spi/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/spi/Makefile	2007-03-24 16:39:15.000000000 +0100
@@ -12,11 +12,14 @@
 
 # SPI master controller drivers (bus)
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
+obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
+obj-$(CONFIG_SPI_AT91)			+= spi_at91_bitbang.o
+obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
diff -urN linux-2.6.20.4-0rig/drivers/spi/spi_at91_bitbang.c linux-2.6.20.4-atmel/drivers/spi/spi_at91_bitbang.c
--- linux-2.6.20.4-0rig/drivers/spi/spi_at91_bitbang.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/spi/spi_at91_bitbang.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,207 @@
+/*
+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
+ *
+ * Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/arch/gpio.h>
+
+
+/*
+ * FIXME this bitbanging version is just to help bootstrap systems until
+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
+ * be a drop-in replacement for this one, and much faster.
+ *
+ * remember:
+ *
+ *	- other at91 parts (like at91sam9) have multiple controllers
+ *	  and different pin muxing; this version is at91rm9200 specfic.
+ *
+ *	- at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
+ *
+ *	- rm9200 spi chipselects drop wrongly, so the native driver
+ *	  will need to use gpios much like this does.
+ *
+ *	- real hardware only allows 8..16 bits per word, while this
+ *	  bitbanger allows 1..32 (incompatible superset).
+ *
+ *	- this disregards clock parameters.  with inlined gpio calls,
+ *	  gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
+ *	  than using the subroutined veresion from txrx_word().
+ *
+ *	- suspend/resume and <linux/clk.h> support is missing ...
+ */
+
+#define	spi_miso_bit	AT91_PIN_PA0
+#define	spi_mosi_bit	AT91_PIN_PA1
+#define	spi_sck_bit	AT91_PIN_PA2
+
+struct at91_spi {
+	struct spi_bitbang	bitbang;
+	struct platform_device	*pdev;
+};
+
+/*----------------------------------------------------------------------*/
+
+static inline void setsck(struct spi_device *spi, int is_on)
+{
+	at91_set_gpio_value(spi_sck_bit, is_on);
+}
+
+static inline void setmosi(struct spi_device *spi, int is_on)
+{
+	at91_set_gpio_value(spi_mosi_bit, is_on);
+}
+
+static inline int getmiso(struct spi_device *spi)
+{
+	return at91_get_gpio_value(spi_miso_bit);
+}
+
+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
+{
+	unsigned long cs = (unsigned long) spi->controller_data;
+
+	/* set default clock polarity */
+	if (is_active)
+		setsck(spi, spi->mode & SPI_CPOL);
+
+	/* only support active-low (default) */
+	at91_set_gpio_value(cs, !is_active);
+}
+
+/*
+ * NOTE:  this is "as fast as we can"; it should be a function of
+ * the device clock ...
+ */
+#define	spidelay(X)	do{} while(0)
+
+#define	EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
+}
+
+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
+}
+
+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
+}
+
+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
+}
+
+/*----------------------------------------------------------------------*/
+
+static int __init at91_spi_probe(struct platform_device *pdev)
+{
+	int			status;
+	struct spi_master	*master;
+	struct at91_spi		*at91_spi;
+
+	if (pdev->id != 0)	/* SPI0 bus */
+		return -EINVAL;
+
+	master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
+	if (!master)
+		return -ENOMEM;
+
+	at91_spi = spi_master_get_devdata(master);
+	at91_spi->pdev = pdev;
+	platform_set_drvdata(pdev, at91_spi);
+
+	/* SPI and bitbang hookup */
+	master->bus_num = 0;
+	master->num_chipselect = 4;
+
+	at91_spi->bitbang.master = spi_master_get(master);
+	at91_spi->bitbang.chipselect = at91_spi_chipselect;
+	at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
+	at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
+	at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
+	at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
+
+	status = spi_bitbang_start(&at91_spi->bitbang);
+	if (status < 0)
+		(void) spi_master_put(at91_spi->bitbang.master);
+
+	return status;
+}
+
+static int __exit at91_spi_remove(struct platform_device *pdev)
+{
+	struct at91_spi	*at91_spi = platform_get_drvdata(pdev);
+	int status;
+
+	/* stop() unregisters child devices too */
+	status = spi_bitbang_stop(&at91_spi->bitbang);
+	(void) spi_master_put(at91_spi->bitbang.master);
+
+	platform_set_drvdata(pdev, NULL);
+	return status;
+}
+
+static struct platform_driver at91_spi_driver = {
+	.probe		= at91_spi_probe,
+	.remove		= __exit_p(at91_spi_remove),
+	.driver		= {
+		.name	= "at91_spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at91_spi_init(void)
+{
+	at91_set_gpio_output(spi_sck_bit, 0);
+	at91_set_gpio_output(spi_mosi_bit, 0);
+	at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
+
+	/* register driver */
+	return platform_driver_register(&at91_spi_driver);
+}
+
+static void __exit at91_spi_exit(void)
+{
+	platform_driver_unregister(&at91_spi_driver);
+}
+
+device_initcall(at91_spi_init);
+module_exit(at91_spi_exit);
+
+MODULE_ALIAS("at91_spi.0");
+
+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.c linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.c
--- linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.c	2007-03-24 16:39:15.000000000 +0100
@@ -287,8 +287,8 @@
 	ep->stopped = stopped;
 
 	/* ep0 is always ready; other endpoints need a non-empty queue */
-	if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
-		at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
+	if (list_empty(&ep->queue) && (ep->id != 0))
+		at91_udp_write(udc, AT91_UDP_IDR, 1 << ep->id);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -541,7 +541,7 @@
 	 * reset/init endpoint fifo.  NOTE:  leaves fifo_bank alone,
 	 * since endpoint resets don't reset hw pingpong state.
 	 */
-	at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
+	at91_udp_write(dev, AT91_UDP_RST_EP, 1 << ep->id);
 	at91_udp_write(dev, AT91_UDP_RST_EP, 0);
 
 	local_irq_restore(flags);
@@ -567,7 +567,7 @@
 
 	/* reset fifos and endpoint */
 	if (ep->udc->clocked) {
-		at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+		at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
 		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 		__raw_writel(0, ep->creg);
 	}
@@ -715,7 +715,7 @@
 
 	if (req && !status) {
 		list_add_tail (&req->queue, &ep->queue);
-		at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
+		at91_udp_write(dev, AT91_UDP_IER, 1 << ep->id);
 	}
 done:
 	local_irq_restore(flags);
@@ -774,7 +774,7 @@
 			csr |= AT91_UDP_FORCESTALL;
 			VDBG("halt %s\n", ep->ep.name);
 		} else {
-			at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+			at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
 			at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 			csr &= ~AT91_UDP_FORCESTALL;
 		}
@@ -913,14 +913,15 @@
 		at91_udp_write(udc, AT91_UDP_TXVC, 0);
 		if (cpu_is_at91rm9200())
 			at91_set_gpio_value(udc->board.pullup_pin, 1);
-		else if (cpu_is_at91sam9260()) {
+		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-
+			
 			txvc |= AT91_UDP_TXVC_PUON;
 			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-		} else if (cpu_is_at91sam9261()) {
+		}
+		else if (cpu_is_at91sam9261()) {
 			u32	usbpucr;
-
+			
 			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
 			usbpucr |= AT91_MATRIX_USBPUCR_PUON;
 			at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
@@ -928,20 +929,20 @@
 	} else {
 		stop_activity(udc);
 		at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
-		if (cpu_is_at91rm9200())
-			at91_set_gpio_value(udc->board.pullup_pin, 0);
-		else if (cpu_is_at91sam9260()) {
-			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-
-			txvc &= ~AT91_UDP_TXVC_PUON;
-			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-		} else if (cpu_is_at91sam9261()) {
-			u32	usbpucr;
-
-			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
-			usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
-			at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
-		}
+ 		if (cpu_is_at91rm9200())
+ 			at91_set_gpio_value(udc->board.pullup_pin, 0);
+ 		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+ 			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+ 
+ 			txvc &= ~AT91_UDP_TXVC_PUON;
+ 			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ 		} else if (cpu_is_at91sam9261()) {
+ 			u32	usbpucr;
+ 
+ 			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ 			usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
+ 			at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ 		}
 		clk_off(udc);
 	}
 }
@@ -1228,7 +1229,7 @@
 		} else if (ep->is_in)
 			goto stall;
 
-		at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+		at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
 		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 		tmp = __raw_readl(ep->creg);
 		tmp |= CLR_FX;
@@ -1504,15 +1505,16 @@
 		}
 	},
 	.ep[0] = {
+		.id		= 0,
 		.ep = {
 			.name	= ep0name,
 			.ops	= &at91_ep_ops,
 		},
 		.udc		= &controller,
 		.maxpacket	= 8,
-		.int_mask	= 1 << 0,
 	},
 	.ep[1] = {
+		.id		= 1,
 		.ep = {
 			.name	= "ep1",
 			.ops	= &at91_ep_ops,
@@ -1520,9 +1522,9 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 64,
-		.int_mask	= 1 << 1,
 	},
 	.ep[2] = {
+		.id		= 2,
 		.ep = {
 			.name	= "ep2",
 			.ops	= &at91_ep_ops,
@@ -1530,9 +1532,9 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 64,
-		.int_mask	= 1 << 2,
 	},
 	.ep[3] = {
+		.id		= 3,
 		.ep = {
 			/* could actually do bulk too */
 			.name	= "ep3-int",
@@ -1540,9 +1542,9 @@
 		},
 		.udc		= &controller,
 		.maxpacket	= 8,
-		.int_mask	= 1 << 3,
 	},
 	.ep[4] = {
+		.id		= 4,
 		.ep = {
 			.name	= "ep4",
 			.ops	= &at91_ep_ops,
@@ -1550,9 +1552,9 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 256,
-		.int_mask	= 1 << 4,
 	},
 	.ep[5] = {
+		.id		= 5,
 		.ep = {
 			.name	= "ep5",
 			.ops	= &at91_ep_ops,
@@ -1560,7 +1562,6 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 256,
-		.int_mask	= 1 << 5,
 	},
 	/* ep6 and ep7 are also reserved (custom silicon might use them) */
 };
@@ -1679,9 +1680,7 @@
 	if (!res)
 		return -ENXIO;
 
-	if (!request_mem_region(res->start,
-			res->end - res->start + 1,
-			driver_name)) {
+	if (!request_mem_region(res->start, res->end - res->start + 1, driver_name)) {
 		DBG("someone's using UDC memory\n");
 		return -EBUSY;
 	}
@@ -1807,16 +1806,13 @@
 			|| !wake
 			|| at91_suspend_entering_slow_clock()) {
 		pullup(udc, 0);
-		disable_irq_wake(udc->udp_irq);
+		wake = 0;
 	} else
 		enable_irq_wake(udc->udp_irq);
 
-	if (udc->board.vbus_pin > 0) {
-		if (wake)
-			enable_irq_wake(udc->board.vbus_pin);
-		else
-			disable_irq_wake(udc->board.vbus_pin);
-	}
+	udc->active_suspend = wake;
+	if (udc->board.vbus_pin > 0 && wake)
+		enable_irq_wake(udc->board.vbus_pin);
 	return 0;
 }
 
@@ -1824,8 +1820,14 @@
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 
+	if (udc->board.vbus_pin > 0 && udc->active_suspend)
+		disable_irq_wake(udc->board.vbus_pin);
+
 	/* maybe reconnect to host; if so, clocks on */
-	pullup(udc, 1);
+	if (udc->active_suspend)
+		disable_irq_wake(udc->udp_irq);
+	else
+		pullup(udc, 1);
 	return 0;
 }
 #else
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.h linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.h
--- linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.h	2007-03-24 16:39:15.000000000 +0100
@@ -105,10 +105,10 @@
 	struct usb_ep			ep;
 	struct list_head		queue;
 	struct at91_udc			*udc;
+	u8				id;
 	void __iomem			*creg;
 
 	unsigned			maxpacket:16;
-	u8				int_mask;
 	unsigned			is_pingpong:1;
 
 	unsigned			stopped:1;
@@ -136,6 +136,7 @@
 	unsigned			wait_for_addr_ack:1;
 	unsigned			wait_for_config_ack:1;
 	unsigned			selfpowered:1;
+	unsigned			active_suspend:1;
 	u8				addr;
 	struct at91_udc_data		board;
 	struct clk			*iclk, *fclk;
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/ether.c linux-2.6.20.4-atmel/drivers/usb/gadget/ether.c
--- linux-2.6.20.4-0rig/drivers/usb/gadget/ether.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/ether.c	2007-03-24 16:42:28.000000000 +0100
@@ -266,6 +266,10 @@
 #define DEV_CONFIG_CDC
 #endif
 
+#ifdef CONFIG_USB_GADGET_HUSB2DEV
+#define DEV_CONFIG_CDC
+#endif
+
 
 /* For CDC-incapable hardware, choose the simple cdc subset.
  * Anything that talks bulk (without notable bugs) can do this.
@@ -428,7 +432,7 @@
 #define DEV_RNDIS_CONFIG_VALUE	2	/* rndis; optional */
 
 static struct usb_device_descriptor
-device_desc = {
+device_desc __attribute__((aligned(2))) = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
@@ -454,7 +458,7 @@
 };
 
 static struct usb_config_descriptor
-eth_config = {
+eth_config __attribute__((aligned(2))) = {
 	.bLength =		sizeof eth_config,
 	.bDescriptorType =	USB_DT_CONFIG,
 
@@ -468,7 +472,7 @@
 
 #ifdef	CONFIG_USB_ETH_RNDIS
 static struct usb_config_descriptor
-rndis_config = {
+rndis_config __attribute__((aligned(2))) = {
 	.bLength =              sizeof rndis_config,
 	.bDescriptorType =      USB_DT_CONFIG,
 
@@ -493,7 +497,7 @@
 
 #ifdef	DEV_CONFIG_CDC
 static struct usb_interface_descriptor
-control_intf = {
+control_intf __attribute__((aligned(2))) = {
 	.bLength =		sizeof control_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -509,7 +513,7 @@
 
 #ifdef	CONFIG_USB_ETH_RNDIS
 static const struct usb_interface_descriptor
-rndis_control_intf = {
+rndis_control_intf __attribute__((aligned(2))) = {
 	.bLength =              sizeof rndis_control_intf,
 	.bDescriptorType =      USB_DT_INTERFACE,
 
@@ -524,7 +528,7 @@
 
 #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
 
-static const struct usb_cdc_header_desc header_desc = {
+static const struct usb_cdc_header_desc __attribute__((aligned(2))) header_desc = {
 	.bLength =		sizeof header_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
@@ -566,7 +570,8 @@
 
 #ifdef	DEV_CONFIG_CDC
 
-static const struct usb_cdc_ether_desc ether_desc = {
+static const struct usb_cdc_ether_desc
+ether_desc __attribute__((aligned(2))) = {
 	.bLength =		sizeof ether_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
@@ -601,7 +606,7 @@
 #define STATUS_BYTECOUNT		16	/* 8 byte header + data */
 
 static struct usb_endpoint_descriptor
-fs_status_desc = {
+fs_status_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -632,7 +637,7 @@
 /* ... but the "real" data interface has two bulk endpoints */
 
 static const struct usb_interface_descriptor
-data_intf = {
+data_intf __attribute__((aligned(2))) = {
 	.bLength =		sizeof data_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -652,7 +657,7 @@
 /* RNDIS doesn't activate by changing to the "real" altsetting */
 
 static const struct usb_interface_descriptor
-rndis_data_intf = {
+rndis_data_intf __attribute__((aligned(2))) = {
 	.bLength =		sizeof rndis_data_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -675,7 +680,7 @@
  */
 
 static const struct usb_interface_descriptor
-subset_data_intf = {
+subset_data_intf __attribute__((aligned(2))) = {
 	.bLength =		sizeof subset_data_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -692,7 +697,7 @@
 
 
 static struct usb_endpoint_descriptor
-fs_source_desc = {
+fs_source_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -701,7 +706,7 @@
 };
 
 static struct usb_endpoint_descriptor
-fs_sink_desc = {
+fs_sink_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -767,7 +772,7 @@
 
 #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
 static struct usb_endpoint_descriptor
-hs_status_desc = {
+hs_status_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -778,7 +783,7 @@
 #endif /* DEV_CONFIG_CDC */
 
 static struct usb_endpoint_descriptor
-hs_source_desc = {
+hs_source_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -787,7 +792,7 @@
 };
 
 static struct usb_endpoint_descriptor
-hs_sink_desc = {
+hs_sink_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -796,7 +801,7 @@
 };
 
 static struct usb_qualifier_descriptor
-dev_qualifier = {
+dev_qualifier __attribute__((aligned(2))) = {
 	.bLength =		sizeof dev_qualifier,
 	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
 
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/file_storage.c linux-2.6.20.4-atmel/drivers/usb/gadget/file_storage.c
--- linux-2.6.20.4-0rig/drivers/usb/gadget/file_storage.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/file_storage.c	2007-03-24 16:42:28.000000000 +0100
@@ -854,7 +854,7 @@
 #define	CONFIG_VALUE		1
 
 static struct usb_device_descriptor
-device_desc = {
+device_desc __attribute__((aligned(2))) = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
@@ -873,7 +873,7 @@
 };
 
 static struct usb_config_descriptor
-config_desc = {
+config_desc __attribute__((aligned(2))) = {
 	.bLength =		sizeof config_desc,
 	.bDescriptorType =	USB_DT_CONFIG,
 
@@ -896,7 +896,7 @@
 /* There is only one interface. */
 
 static struct usb_interface_descriptor
-intf_desc = {
+intf_desc __attribute__((aligned(2))) = {
 	.bLength =		sizeof intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -911,7 +911,7 @@
  * and interrupt-in. */
 
 static struct usb_endpoint_descriptor
-fs_bulk_in_desc = {
+fs_bulk_in_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -921,7 +921,7 @@
 };
 
 static struct usb_endpoint_descriptor
-fs_bulk_out_desc = {
+fs_bulk_out_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -931,7 +931,7 @@
 };
 
 static struct usb_endpoint_descriptor
-fs_intr_in_desc = {
+fs_intr_in_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -963,7 +963,7 @@
  * for the config descriptor.
  */
 static struct usb_qualifier_descriptor
-dev_qualifier = {
+dev_qualifier __attribute__((aligned(2))) = {
 	.bLength =		sizeof dev_qualifier,
 	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
 
@@ -974,7 +974,7 @@
 };
 
 static struct usb_endpoint_descriptor
-hs_bulk_in_desc = {
+hs_bulk_in_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -984,7 +984,7 @@
 };
 
 static struct usb_endpoint_descriptor
-hs_bulk_out_desc = {
+hs_bulk_out_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -995,7 +995,7 @@
 };
 
 static struct usb_endpoint_descriptor
-hs_intr_in_desc = {
+hs_intr_in_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/gadget_chips.h linux-2.6.20.4-atmel/drivers/usb/gadget/gadget_chips.h
--- linux-2.6.20.4-0rig/drivers/usb/gadget/gadget_chips.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/gadget_chips.h	2007-03-24 16:42:29.000000000 +0100
@@ -75,6 +75,12 @@
 #define	gadget_is_pxa27x(g)	0
 #endif
 
+#ifdef CONFIG_USB_GADGET_HUSB2DEV
+#define gadget_is_husb2dev(g)	!strcmp("husb2_udc", (g)->name)
+#else
+#define gadget_is_husb2dev(g)	0
+#endif
+
 #ifdef CONFIG_USB_GADGET_S3C2410
 #define gadget_is_s3c2410(g)    !strcmp("s3c2410_udc", (g)->name)
 #else
@@ -169,5 +175,7 @@
 		return 0x16;
 	else if (gadget_is_mpc8272(gadget))
 		return 0x17;
+	else if (gadget_is_husb2dev(gadget))
+		return 0x80;
 	return -ENOENT;
 }
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.c linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.c
--- linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,1997 @@
+/*
+ * Driver for the Atmel HUSB2device high speed USB device controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+#include <linux/dmapool.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+
+#include "husb2_udc.h"
+
+#define DRIVER_VERSION	"0.9"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+#define FIFO_IOMEM_ID	0
+#define CTRL_IOMEM_ID	1
+
+#ifdef DEBUG
+#define DBG_ERR		0x0001	/* report all error returns */
+#define DBG_HW		0x0002	/* debug hardware initialization */
+#define DBG_GADGET	0x0004	/* calls to/from gadget driver */
+#define DBG_INT		0x0008	/* interrupts */
+#define DBG_BUS		0x0010	/* report changes in bus state */
+#define DBG_QUEUE	0x0020  /* debug request queue processing */
+#define DBG_FIFO	0x0040  /* debug FIFO contents */
+#define DBG_DMA		0x0080  /* debug DMA handling */
+#define DBG_REQ		0x0100	/* print out queued request length */
+#define DBG_ALL		0xffff
+#define DBG_NONE	0x0000
+
+#define DEBUG_LEVEL	(DBG_ERR|DBG_REQ)
+#define DBG(level, fmt, ...)					\
+	do {							\
+		if ((level) & DEBUG_LEVEL)			\
+			printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__);	\
+	} while (0)
+#else
+#define DBG(level, fmt...)
+#endif
+
+static struct husb2_udc the_udc;
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <asm/uaccess.h>
+
+static int queue_dbg_open(struct inode *inode, struct file *file)
+{
+	struct husb2_ep *ep = inode->i_private;
+	struct husb2_request *req, *req_copy;
+	struct list_head *queue_data;
+
+	queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
+	if (!queue_data)
+		return -ENOMEM;
+	INIT_LIST_HEAD(queue_data);
+
+	spin_lock_irq(&ep->udc->lock);
+	list_for_each_entry(req, &ep->queue, queue) {
+		req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
+		if (!req_copy)
+			goto fail;
+		memcpy(req_copy, req, sizeof(*req_copy));
+		list_add_tail(&req_copy->queue, queue_data);
+	}
+	spin_unlock_irq(&ep->udc->lock);
+
+	file->private_data = queue_data;
+	return 0;
+
+fail:
+	spin_unlock_irq(&ep->udc->lock);
+	list_for_each_entry_safe(req, req_copy, queue_data, queue) {
+		list_del(&req->queue);
+		kfree(req);
+	}
+	kfree(queue_data);
+	return -ENOMEM;
+}
+
+/*
+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
+ *
+ * b: buffer address
+ * l: buffer length
+ * I/i: interrupt/no interrupt
+ * Z/z: zero/no zero
+ * S/s: short ok/short not ok
+ * s: status
+ * n: nr_packets
+ * F/f: submitted/not submitted to FIFO
+ * D/d: using/not using DMA
+ * L/l: last transaction/not last transaction
+ */
+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
+			      size_t nbytes, loff_t *ppos)
+{
+	struct list_head *queue = file->private_data;
+	struct husb2_request *req, *tmp_req;
+	size_t len, remaining, actual = 0;
+	char tmpbuf[38];
+
+	if (!access_ok(VERIFY_WRITE, buf, nbytes))
+		return -EFAULT;
+
+	mutex_lock(&file->f_dentry->d_inode->i_mutex);
+	list_for_each_entry_safe(req, tmp_req, queue, queue) {
+		len = snprintf(tmpbuf, sizeof(tmpbuf),
+			       "%8p %08x %c%c%c %5d %4u %c%c%c\n",
+			       req->req.buf, req->req.length,
+			       req->req.no_interrupt ? 'i' : 'I',
+			       req->req.zero ? 'Z' : 'z',
+			       req->req.short_not_ok ? 's' : 'S',
+			       req->req.status,
+			       req->nr_pkts,
+			       req->submitted ? 'F' : 'f',
+			       req->using_dma ? 'D' : 'd',
+			       req->last_transaction ? 'L' : 'l');
+		len = min(len, sizeof(tmpbuf));
+		if (len > nbytes)
+			break;
+
+		list_del(&req->queue);
+		kfree(req);
+
+		remaining = __copy_to_user(buf, tmpbuf, len);
+		actual += len - remaining;
+		if (remaining)
+			break;
+
+		nbytes -= len;
+		buf += len;
+	}
+	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+
+	return actual;
+}
+
+static int queue_dbg_release(struct inode *inode, struct file *file)
+{
+	struct list_head *queue_data = file->private_data;
+	struct husb2_request *req, *tmp_req;
+
+	list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
+		list_del(&req->queue);
+		kfree(req);
+	}
+	kfree(queue_data);
+	return 0;
+}
+
+static int regs_dbg_open(struct inode *inode, struct file *file)
+{
+	struct husb2_udc *udc;
+	unsigned int i;
+	u32 *data;
+	int ret = -ENOMEM;
+
+	mutex_lock(&inode->i_mutex);
+	udc = inode->i_private;
+	data = kmalloc(inode->i_size, GFP_KERNEL);
+	if (!data)
+		goto out;
+
+	spin_lock_irq(&udc->lock);
+	for (i = 0; i < inode->i_size / 4; i++)
+		data[i] = __raw_readl(udc->regs + i * 4);
+	spin_unlock_irq(&udc->lock);
+
+	file->private_data = data;
+	ret = 0;
+
+out:
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
+
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
+			     size_t nbytes, loff_t *ppos)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	int ret;
+
+	mutex_lock(&inode->i_mutex);
+	ret = simple_read_from_buffer(buf, nbytes, ppos,
+				       file->private_data,
+				       file->f_dentry->d_inode->i_size);
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
+
+static int regs_dbg_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+const struct file_operations queue_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= queue_dbg_open,
+	.llseek		= no_llseek,
+	.read		= queue_dbg_read,
+	.release	= queue_dbg_release,
+};
+
+const struct file_operations regs_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= regs_dbg_open,
+	.llseek		= generic_file_llseek,
+	.read		= regs_dbg_read,
+	.release	= regs_dbg_release,
+};
+
+static void husb2_ep_init_debugfs(struct husb2_udc *udc,
+				  struct husb2_ep *ep)
+{
+	struct dentry *ep_root;
+
+	ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
+	if (!ep_root)
+		goto err_root;
+	ep->debugfs_dir = ep_root;
+
+	ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
+						ep, &queue_dbg_fops);
+	if (!ep->debugfs_queue)
+		goto err_queue;
+
+	if (ep_can_dma(ep)) {
+		ep->debugfs_dma_status
+			= debugfs_create_u32("dma_status", 0400, ep_root,
+					     &ep->last_dma_status);
+		if (!ep->debugfs_dma_status)
+			goto err_dma_status;
+	}
+
+	return;
+
+err_dma_status:
+	debugfs_remove(ep->debugfs_queue);
+err_queue:
+	debugfs_remove(ep_root);
+err_root:
+	dev_err(&ep->udc->pdev->dev,
+		"failed to create debugfs directory for %s\n", ep_name(ep));
+}
+
+static void husb2_ep_cleanup_debugfs(struct husb2_ep *ep)
+{
+	debugfs_remove(ep->debugfs_queue);
+	debugfs_remove(ep->debugfs_dma_status);
+	debugfs_remove(ep->debugfs_dir);
+	ep->debugfs_dma_status = NULL;
+	ep->debugfs_dir = NULL;
+}
+
+static void husb2_init_debugfs(struct husb2_udc *udc)
+{
+	struct dentry *root, *regs;
+	struct resource *regs_resource;
+
+	root = debugfs_create_dir(udc->gadget.name, NULL);
+	if (IS_ERR(root) || !root)
+		goto err_root;
+	udc->debugfs_root = root;
+
+	regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
+	if (!regs)
+		goto err_regs;
+
+	regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
+					      CTRL_IOMEM_ID);
+	regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
+	udc->debugfs_regs = regs;
+
+	husb2_ep_init_debugfs(udc, to_husb2_ep(udc->gadget.ep0));
+
+	return;
+
+err_regs:
+	debugfs_remove(root);
+err_root:
+	udc->debugfs_root = NULL;
+	dev_err(&udc->pdev->dev, "debugfs is not available\n");
+}
+
+static void husb2_cleanup_debugfs(struct husb2_udc *udc)
+{
+	husb2_ep_cleanup_debugfs(to_husb2_ep(udc->gadget.ep0));
+	debugfs_remove(udc->debugfs_regs);
+	debugfs_remove(udc->debugfs_root);
+	udc->debugfs_regs = NULL;
+	udc->debugfs_root = NULL;
+}
+#else
+static inline void husb2_ep_init_debugfs(struct husb2_udc *udc,
+					 struct husb2_ep *ep)
+{
+
+}
+
+static inline void husb2_ep_cleanup_debugfs(struct husb2_ep *ep)
+{
+
+}
+
+static inline void husb2_init_debugfs(struct husb2_udc *udc)
+{
+
+}
+
+static inline void husb2_cleanup_debugfs(struct husb2_udc *udc)
+{
+
+}
+#endif
+
+static void copy_to_fifo(void __iomem *fifo, void *buf, int len)
+{
+	unsigned long tmp;
+
+	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
+	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
+		tmp = *(unsigned long *)buf;
+		if (len >= 4) {
+			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
+			__raw_writel(tmp, fifo);
+		} else {
+			do {
+				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
+				__raw_writeb(tmp >> 24, fifo);
+				fifo++;
+				tmp <<= 8;
+			} while (--len);
+			break;
+		}
+	}
+}
+
+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
+{
+	union {
+		unsigned long *w;
+		unsigned char *b;
+	} p;
+	unsigned long tmp;
+
+	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
+	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
+		if (len >= 4) {
+			tmp = __raw_readl(fifo);
+			*p.w = tmp;
+			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
+		} else {
+			do {
+				tmp = __raw_readb(fifo);
+				*p.b = tmp;
+				DBG(DBG_FIFO, " -> %02lx\n", tmp);
+				fifo++, p.b++;
+			} while (--len);
+		}
+	}
+}
+
+static void next_fifo_transaction(struct husb2_ep *ep,
+				  struct husb2_request *req)
+{
+	unsigned int transaction_len;
+
+	transaction_len = req->req.length - req->req.actual;
+	req->last_transaction = 1;
+	if (transaction_len > ep->ep.maxpacket) {
+		transaction_len = ep->ep.maxpacket;
+		req->last_transaction = 0;
+	} else if (transaction_len == ep->ep.maxpacket
+		   && req->req.zero) {
+		req->last_transaction = 0;
+	}
+	DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
+	    ep_name(ep), req, transaction_len,
+	    req->last_transaction ? ", done" : "");
+
+	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
+	husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
+	req->req.actual += transaction_len;
+}
+
+static void submit_request(struct husb2_ep *ep, struct husb2_request *req)
+{
+	DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
+	    ep_name(ep), req, req->req.length);
+
+	req->req.actual = 0;
+	req->submitted = 1;
+
+	if (req->using_dma) {
+		if (req->req.length == 0) {
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
+		} else {
+			husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
+			husb2_dma_writel(ep, NXT_DSC,
+					 req->packet[0].desc_dma);
+			husb2_dma_writel(ep, CONTROL, HUSB2_BIT(DMA_LINK));
+		}
+	} else {
+		next_fifo_transaction(ep, req);
+		if (req->last_transaction)
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
+		else
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
+	}
+}
+
+static void submit_next_request(struct husb2_ep *ep)
+{
+	struct husb2_request *req;
+
+	if (list_empty(&ep->queue)) {
+		husb2_ep_writel(ep, CTL_DIS, (HUSB2_BIT(TX_PK_RDY)
+					      | HUSB2_BIT(RX_BK_RDY)));
+		return;
+	}
+
+	req = list_entry(ep->queue.next, struct husb2_request, queue);
+	if (!req->submitted)
+		submit_request(ep, req);
+}
+
+static void send_status(struct husb2_udc *udc, struct husb2_ep *ep)
+{
+	ep->state = STATUS_STAGE_IN;
+	husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
+	husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
+}
+
+static void receive_data(struct husb2_ep *ep)
+{
+	struct husb2_udc *udc = ep->udc;
+	struct husb2_request *req;
+	unsigned long status;
+	unsigned int bytecount, nr_busy;
+	int is_complete = 0;
+
+	status = husb2_ep_readl(ep, STA);
+	nr_busy = HUSB2_BFEXT(BUSY_BANKS, status);
+
+	DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
+
+	while (nr_busy > 0) {
+		if (list_empty(&ep->queue)) {
+			husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(RX_BK_RDY));
+			break;
+		}
+		req = list_entry(ep->queue.next,
+				 struct husb2_request, queue);
+
+		bytecount = HUSB2_BFEXT(BYTE_COUNT, status);
+
+		if (status & (1 << 31))
+			is_complete = 1;
+		if (req->req.actual + bytecount >= req->req.length) {
+			is_complete = 1;
+			bytecount = req->req.length - req->req.actual;
+		}
+
+		copy_from_fifo(req->req.buf + req->req.actual,
+			       ep->fifo, bytecount);
+		req->req.actual += bytecount;
+
+		husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
+
+		if (is_complete) {
+			DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
+			req->req.status = 0;
+			list_del_init(&req->queue);
+			req->req.complete(&ep->ep, &req->req);
+		}
+
+		status = husb2_ep_readl(ep, STA);
+		nr_busy = HUSB2_BFEXT(BUSY_BANKS, status);
+
+		if (is_complete && ep_is_control(ep)) {
+			BUG_ON(nr_busy != 0);
+			send_status(udc, ep);
+			break;
+		}
+	}
+}
+
+static void request_complete(struct husb2_ep *ep,
+			     struct husb2_request *req,
+			     int status)
+{
+	struct husb2_udc *udc = ep->udc;
+	int i;
+
+	BUG_ON(!list_empty(&req->queue));
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+
+	if (req->packet) {
+		for (i = 0; i < req->nr_pkts; i++)
+			dma_pool_free(udc->desc_pool, req->packet[i].desc,
+				      req->packet[i].desc_dma);
+		kfree(req->packet);
+		req->packet = NULL;
+		dma_unmap_single(&udc->pdev->dev,
+				 req->req.dma, req->req.length,
+				 (ep_is_in(ep)
+				  ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+	}
+
+	DBG(DBG_GADGET | DBG_REQ,
+	    "%s: req %p complete: status %d, actual %u\n",
+	    ep_name(ep), req, req->req.status, req->req.actual);
+	req->req.complete(&ep->ep, &req->req);
+}
+
+static void request_complete_list(struct husb2_ep *ep,
+				  struct list_head *list,
+				  int status)
+{
+	struct husb2_request *req, *tmp_req;
+
+	list_for_each_entry_safe(req, tmp_req, list, queue) {
+		list_del_init(&req->queue);
+		request_complete(ep, req, status);
+	}
+}
+
+static int husb2_ep_enable(struct usb_ep *_ep,
+			   const struct usb_endpoint_descriptor *desc)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	struct husb2_udc *udc = ep->udc;
+	unsigned long flags, ept_cfg, maxpacket;
+
+	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
+
+	maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+	if (ep->index == 0
+	    || desc->bDescriptorType != USB_DT_ENDPOINT
+	    || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
+		!= ep->index)
+	    || maxpacket == 0
+	    || maxpacket > ep->fifo_size) {
+		DBG(DBG_ERR, "ep_enable: Invalid argument");
+		return -EINVAL;
+	}
+
+	if (((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+	     == USB_ENDPOINT_XFER_ISOC)
+	    && !(ep->capabilities & HUSB2_EP_CAP_ISOC)) {
+		DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
+		    ep_name(ep));
+		return -EINVAL;
+	}
+
+	if (maxpacket <= 8)
+		ept_cfg = HUSB2_BF(EPT_SIZE, HUSB2_EPT_SIZE_8);
+	else
+		/* LSB is bit 1, not 0 */
+		ept_cfg = HUSB2_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
+	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
+	    ep_name(ep), ept_cfg, maxpacket);
+
+	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+		ept_cfg |= HUSB2_BIT(EPT_DIR);
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_CONTROL);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_ISO);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_BULK);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_INT);
+		break;
+	}
+	ept_cfg |= HUSB2_BF(BK_NUMBER, ep->nr_banks);
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	if (ep->desc) {
+		spin_unlock_irqrestore(&ep->udc->lock, flags);
+		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
+		return -EBUSY;
+	}
+
+	ep->desc = desc;
+	ep->ep.maxpacket = maxpacket;
+
+	husb2_ep_writel(ep, CFG, ept_cfg);
+	husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(EPT_ENABLE));
+
+	if (ep_can_dma(ep)) {
+		husb2_writel(udc, INT_ENB,
+			     (husb2_readl(udc, INT_ENB)
+			      | HUSB2_BF(EPT_INT, 1 << ep->index)
+			      | HUSB2_BF(DMA_INT, 1 << ep->index)));
+		husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(AUTO_VALID));
+	} else {
+		husb2_writel(udc, INT_ENB,
+			     (husb2_readl(udc, INT_ENB)
+			      | HUSB2_BF(EPT_INT, 1 << ep->index)));
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
+	    (unsigned long)husb2_ep_readl(ep, CFG));
+	DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
+	    (unsigned long)husb2_readl(udc, INT_ENB));
+
+	husb2_ep_init_debugfs(udc, ep);
+
+	return 0;
+}
+
+static int husb2_ep_disable(struct usb_ep *_ep)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	struct husb2_udc *udc = ep->udc;
+	LIST_HEAD(req_list);
+	unsigned long flags;
+
+	DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
+
+	husb2_ep_cleanup_debugfs(ep);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!ep->desc) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		DBG(DBG_ERR, "ep_disable: %s not enabled\n",
+		    ep_name(ep));
+		return -EINVAL;
+	}
+	ep->desc = NULL;
+
+	list_splice_init(&ep->queue, &req_list);
+	if (ep_can_dma(ep)) {
+		husb2_dma_writel(ep, CONTROL, 0);
+		husb2_dma_writel(ep, ADDRESS, 0);
+		husb2_dma_readl(ep, STATUS);
+	}
+	husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(EPT_ENABLE));
+	husb2_writel(udc, INT_ENB, (husb2_readl(udc, INT_ENB)
+				    & ~HUSB2_BF(EPT_INT, 1 << ep->index)));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	request_complete_list(ep, &req_list, -ESHUTDOWN);
+
+	return 0;
+}
+
+static struct usb_request *
+husb2_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
+{
+	struct husb2_request *req;
+
+	DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	req->req.dma = DMA_ADDR_INVALID;
+
+	return &req->req;
+}
+
+static void
+husb2_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct husb2_request *req = to_husb2_req(_req);
+
+	DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
+
+	kfree(req);
+}
+
+static void *husb2_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
+				   dma_addr_t *dma, unsigned gfp_flags)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	void *buf;
+
+	/*
+	 * We depend on kmalloc() returning cache-aligned memory. This
+	 * is normally guaranteed as long as we allocate a whole
+	 * cacheline or more.
+	 *
+	 * When CONFIG_DEBUG_SLAB is enabled, however, the slab
+	 * allocator inserts red zones and ownership information,
+	 * causing the slab objects to be misaligned.
+	 *
+	 * One alternative would be to use dma_alloc_coherent, but
+	 * that would make us unable to allocate anything less than a
+	 * page at a time.
+	 */
+#ifdef CONFIG_DEBUG_SLAB
+# error The HUSB2 UDC driver breaks with SLAB debugging enabled
+#endif
+
+	if (bytes < L1_CACHE_BYTES)
+		bytes = L1_CACHE_BYTES;
+
+	buf = kmalloc(bytes, gfp_flags);
+
+	/*
+	 * Seems like we have to map the buffer any chance we get.
+	 * ether.c wants us to initialize the dma member of a
+	 * different request than the one receiving the buffer, so one
+	 * never knows...
+	 *
+	 * Ah, screw it.  The ether driver is probably wrong, and this
+	 * is not the right place to do the mapping.  The driver
+	 * shouldn't mess with our DMA mappings anyway.
+	 */
+	*dma = DMA_ADDR_INVALID;
+
+	DBG(DBG_GADGET, "ep_alloc_buffer: %s, %u, 0x%x -> %p\n",
+	    ep_name(ep), bytes, gfp_flags, buf);
+
+	return buf;
+}
+
+static void husb2_ep_free_buffer(struct usb_ep *_ep, void *buf,
+				 dma_addr_t dma, unsigned bytes)
+{
+	DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
+	    _ep->name, buf, bytes);
+	kfree(buf);
+}
+
+static int queue_dma(struct husb2_udc *udc, struct husb2_ep *ep,
+		     struct husb2_request *req, unsigned int direction,
+		     gfp_t gfp_flags)
+{
+	struct husb2_packet *pkt, *prev_pkt;
+	unsigned int pkt_size, nr_pkts, i;
+	unsigned int residue;
+	dma_addr_t addr;
+	unsigned long flags;
+	u32 ctrl;
+
+	req->using_dma = 1;
+
+	if (req->req.length == 0) {
+		if (!req->req.zero)
+			return -EINVAL;
+		req->send_zlp = 1;
+
+		spin_lock_irqsave(&udc->lock, flags);
+		husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
+		list_add_tail(&req->queue, &ep->queue);
+		spin_unlock_irqrestore(&udc->lock, flags);
+
+		return 0;
+	}
+
+	if (req->req.dma == DMA_ADDR_INVALID)
+		req->req.dma = dma_map_single(&udc->pdev->dev,
+					      req->req.buf,
+					      req->req.length,
+					      direction);
+	else
+		dma_sync_single_for_device(&udc->pdev->dev,
+					   req->req.dma,
+					   req->req.length,
+					   direction);
+
+	pkt_size = ep->ep.maxpacket;
+	nr_pkts = req->req.length / pkt_size;
+	residue = req->req.length % pkt_size;
+	if (residue != 0)
+		nr_pkts++;
+	else if (req->req.zero && ep_is_in(ep))
+		/* ensure last packet is short */
+		req->send_zlp = 1;
+
+	req->nr_pkts = nr_pkts;
+
+	req->packet = kzalloc(sizeof(*req->packet) * nr_pkts, gfp_flags);
+	if (!req->packet)
+		goto out_of_memory;
+
+	addr = req->req.dma;
+	ctrl = (HUSB2_BF(DMA_BUF_LEN, pkt_size)
+		| HUSB2_BIT(DMA_CH_EN) | HUSB2_BIT(DMA_LINK)
+		| HUSB2_BIT(DMA_END_TR_EN) | HUSB2_BIT(DMA_END_TR_IE));
+	prev_pkt = NULL;
+	pkt = NULL;
+	DBG(DBG_DMA, "DMA descriptors:\n");
+	for (i = 0; i < nr_pkts; i++) {
+		pkt = &req->packet[i];
+		pkt->desc = dma_pool_alloc(udc->desc_pool, gfp_flags,
+					   &pkt->desc_dma);
+		if (!pkt->desc)
+			goto out_of_memory;
+
+		if (prev_pkt) {
+			prev_pkt->desc->next = pkt->desc_dma;
+			DBG(DBG_DMA, "[%d] n%08x a%08x c%08x\n",
+			    i - 1, prev_pkt->desc->next, prev_pkt->desc->addr,
+			    prev_pkt->desc->ctrl);
+		}
+		prev_pkt = pkt;
+
+		pkt->desc->addr = addr;
+		pkt->desc->ctrl = ctrl;
+		addr += pkt_size;
+	}
+
+	/* special care is needed for the last packet... */
+	ctrl = (HUSB2_BIT(DMA_CH_EN)
+		| HUSB2_BIT(DMA_END_TR_EN) | HUSB2_BIT(DMA_END_TR_IE)
+		| HUSB2_BIT(DMA_END_BUF_IE));
+	if (ep_is_in(ep))
+		ctrl |= HUSB2_BIT(DMA_END_BUF_EN);
+	if (req->req.zero || residue)
+		ctrl |= HUSB2_BF(DMA_BUF_LEN, residue);
+	else
+		ctrl |= HUSB2_BF(DMA_BUF_LEN, pkt_size);
+	pkt->desc->ctrl = ctrl;
+
+	DBG(DBG_DMA, "[%d] n%08x a%08x c%08x\n",
+	    i - 1, prev_pkt->desc->next, prev_pkt->desc->addr,
+	    prev_pkt->desc->ctrl);
+
+	/* Add this request to the queue and try to chain the DMA descriptors */
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* If the DMA controller is idle, start it */
+	if (list_empty(&ep->queue)) {
+		husb2_dma_writel(ep, NXT_DSC, req->packet[0].desc_dma);
+		husb2_dma_writel(ep, CONTROL, HUSB2_BIT(DMA_LINK));
+	}
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+
+out_of_memory:
+	printk(KERN_ERR "ERROR: Could not allocate DMA memory for endpoint %s\n",
+	       ep_name(ep));
+	if (req->packet) {
+		for (i = 0; i < nr_pkts; i++)
+			if (req->packet[i].desc)
+				dma_pool_free(udc->desc_pool,
+					      req->packet[i].desc,
+					      req->packet[i].desc_dma);
+		kfree(req->packet);
+	}
+
+	return -ENOMEM;
+}
+
+static int husb2_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			  gfp_t gfp_flags)
+{
+	struct husb2_request *req = to_husb2_req(_req);
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	struct husb2_udc *udc = ep->udc;
+	unsigned long flags;
+	int direction_in = 0;
+
+	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
+	    "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+	if (!ep->desc)
+		return -ENODEV;
+
+	req->nr_pkts = 0;
+	req->submitted = 0;
+	req->using_dma = 0;
+	req->last_transaction = 0;
+	req->send_zlp = 0;
+
+	BUG_ON(req->packet);
+
+	if (ep_is_in(ep)
+	    || (ep_is_control(ep) && (ep->state == DATA_STAGE_IN
+				      || ep->state == STATUS_STAGE_IN)))
+		direction_in = 1;
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	if (ep_can_dma(ep)) {
+		return queue_dma(udc, ep, req, (direction_in
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE),
+				 gfp_flags);
+	} else {
+		spin_lock_irqsave(&udc->lock, flags);
+		list_add_tail(&req->queue, &ep->queue);
+
+		if (direction_in)
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
+		else
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(RX_BK_RDY));
+		spin_unlock_irqrestore(&udc->lock, flags);
+	}
+
+	return 0;
+}
+
+static void husb2_update_req(struct husb2_ep *ep, struct husb2_request *req,
+			     u32 status)
+{
+	struct husb2_dma_desc *desc;
+	dma_addr_t from;
+	dma_addr_t addr;
+	size_t size;
+	unsigned int i;
+
+	addr = husb2_dma_readl(ep, ADDRESS);
+	req->req.actual = 0;
+
+	for (i = 0; i < req->nr_pkts; i++) {
+		desc = req->packet[i].desc;
+		from = desc->addr;
+		size = HUSB2_BFEXT(DMA_BUF_LEN, desc->ctrl);
+
+		req->req.actual += size;
+
+		DBG(DBG_DMA, " from=%#08x, size=%#zx\n", from, size);
+
+		if (from <= addr && (from + size) >= addr)
+			break;
+	}
+
+	req->req.actual -= HUSB2_BFEXT(DMA_BUF_LEN, status);
+}
+
+static int stop_dma(struct husb2_ep *ep, u32 *pstatus)
+{
+	unsigned int timeout;
+	u32 status;
+
+	/*
+	 * Stop the DMA controller. When writing both CH_EN
+	 * and LINK to 0, the other bits are not affected.
+	 */
+	husb2_dma_writel(ep, CONTROL, 0);
+
+	/* Wait for the FIFO to empty */
+	for (timeout = 40; timeout; --timeout) {
+		status = husb2_dma_readl(ep, STATUS);
+		if (!(status & HUSB2_BIT(DMA_CH_EN)))
+			break;
+		udelay(1);
+	}
+
+	if (pstatus)
+		*pstatus = status;
+
+	if (timeout == 0) {
+		dev_err(&ep->udc->pdev->dev,
+			"%s: timed out waiting for DMA FIFO to empty\n",
+			ep_name(ep));
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int husb2_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	struct husb2_udc *udc = ep->udc;
+	struct husb2_request *req = to_husb2_req(_req);
+	unsigned long flags;
+	u32 status;
+
+	DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", ep_name(ep), req);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (req->using_dma) {
+		/*
+		 * If this request is currently being transferred,
+		 * stop the DMA controller and reset the FIFO.
+		 */
+		if (ep->queue.next == &req->queue) {
+			status = husb2_dma_readl(ep, STATUS);
+			if (status & HUSB2_BIT(DMA_CH_EN))
+				stop_dma(ep, &status);
+
+#ifdef CONFIG_DEBUG_FS
+			ep->last_dma_status = status;
+#endif
+
+			husb2_writel(udc, EPT_RST,
+				     1 << ep_index(ep));
+
+			husb2_update_req(ep, req, status);
+		}
+	}
+
+	/*
+	 * Errors should stop the queue from advancing until the
+	 * completion function returns.
+	 */
+	list_del_init(&req->queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	request_complete(ep, req, -ECONNRESET);
+
+	/* Process the next request if any */
+	spin_lock_irqsave(&udc->lock, flags);
+	submit_next_request(ep);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int husb2_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	struct husb2_udc *udc = ep->udc;
+	unsigned long flags;
+	int ret = 0;
+
+	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
+	    value ? "set" : "clear");
+
+	if (!ep->desc) {
+		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
+		    ep_name(ep));
+		return -ENODEV;
+	}
+	if (ep_is_isochronous(ep)) {
+		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
+		    ep_name(ep));
+		return -ENOTTY;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * We can't halt IN endpoints while there are still data to be
+	 * transferred
+	 */
+	if (!list_empty(&ep->queue)
+	    || ((value && ep_is_in(ep)
+		 && (husb2_ep_readl(ep, STA)
+		     & HUSB2_BF(BUSY_BANKS, -1L))))) {
+		ret = -EAGAIN;
+	} else {
+		if (value)
+			husb2_ep_writel(ep, SET_STA, HUSB2_BIT(FORCE_STALL));
+		else
+			husb2_ep_writel(ep, CLR_STA, (HUSB2_BIT(FORCE_STALL)
+						      | HUSB2_BIT(TOGGLE_SEQ)));
+		husb2_ep_readl(ep, STA);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+static int husb2_ep_fifo_status(struct usb_ep *_ep)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+
+	return HUSB2_BFEXT(BYTE_COUNT, husb2_ep_readl(ep, STA));
+}
+
+static void husb2_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct husb2_ep *ep = to_husb2_ep(_ep);
+	struct husb2_udc *udc = ep->udc;
+
+	husb2_writel(udc, EPT_RST, 1 << ep->index);
+}
+
+struct usb_ep_ops husb2_ep_ops = {
+	.enable		= husb2_ep_enable,
+	.disable	= husb2_ep_disable,
+	.alloc_request	= husb2_ep_alloc_request,
+	.free_request	= husb2_ep_free_request,
+	.alloc_buffer	= husb2_ep_alloc_buffer,
+	.free_buffer	= husb2_ep_free_buffer,
+	.queue		= husb2_ep_queue,
+	.dequeue	= husb2_ep_dequeue,
+	.set_halt	= husb2_ep_set_halt,
+	.fifo_status	= husb2_ep_fifo_status,
+	.fifo_flush	= husb2_ep_fifo_flush,
+};
+
+static int husb2_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct husb2_udc *udc = to_husb2_udc(gadget);
+
+	return HUSB2_BFEXT(FRAME_NUMBER, husb2_readl(udc, FNUM));
+}
+
+struct usb_gadget_ops husb2_udc_ops = {
+	.get_frame	= husb2_udc_get_frame,
+};
+
+#define EP(nam, type, idx, caps) {				\
+	.ep	= {						\
+		.ops		= &husb2_ep_ops,		\
+		.name		= nam,				\
+		.maxpacket	= type##_FIFO_SIZE,		\
+	},							\
+	.udc		= &the_udc,				\
+	.queue		= LIST_HEAD_INIT(husb2_ep[idx].queue),	\
+	.fifo_size	= type##_FIFO_SIZE,			\
+	.nr_banks	= type##_NR_BANKS,			\
+	.index		= idx,					\
+	.capabilities	= caps,					\
+}
+
+static struct husb2_ep husb2_ep[] = {
+	EP("ep0", EP0, 0, 0),
+	EP("ep1in-bulk", BULK, 1, HUSB2_EP_CAP_DMA),
+	EP("ep2out-bulk", BULK, 2, HUSB2_EP_CAP_DMA),
+	EP("ep3in-iso", ISO, 3, HUSB2_EP_CAP_DMA | HUSB2_EP_CAP_ISOC),
+	EP("ep4out-iso", ISO, 4, HUSB2_EP_CAP_DMA | HUSB2_EP_CAP_ISOC),
+	EP("ep5in-int", INT, 5, HUSB2_EP_CAP_DMA),
+	EP("ep6out-int", INT, 6, HUSB2_EP_CAP_DMA),
+};
+#undef EP
+
+static struct usb_endpoint_descriptor husb2_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bEndpointAddress = 0,
+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize = __constant_cpu_to_le16(64),
+	/* FIXME: I have no idea what to put here */
+	.bInterval = 1,
+};
+
+static void nop_release(struct device *dev)
+{
+
+}
+
+static struct husb2_udc the_udc = {
+	.gadget	= {
+		.ops		= &husb2_udc_ops,
+		.ep0		= &husb2_ep[0].ep,
+		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
+		.is_dualspeed	= 1,
+		.name		= "husb2_udc",
+		.dev	= {
+			.bus_id		= "gadget",
+			.release	= nop_release,
+		},
+	},
+
+	.lock	= SPIN_LOCK_UNLOCKED,
+};
+
+static void udc_enable(struct husb2_udc *udc)
+{
+	struct husb2_ep *ep0 = &husb2_ep[0];
+
+	/* Enable the controller */
+	husb2_writel(udc, CTRL, HUSB2_BIT(EN_HUSB2));
+
+	/* Reset all endpoints and enable basic interrupts */
+	husb2_writel(udc, EPT_RST, ~0UL);
+	husb2_writel(udc, INT_ENB, (HUSB2_BIT(DET_SUSPEND)
+				    | HUSB2_BIT(END_OF_RESET)
+				    | HUSB2_BIT(END_OF_RESUME)));
+
+	/* Configure endpoint 0 */
+	ep0->desc = &husb2_ep0_desc;
+
+	husb2_writel(udc, EPT_RST, 1 << 0);
+	husb2_ep_writel(ep0, CTL_ENB, HUSB2_BIT(EPT_ENABLE));
+	husb2_ep_writel(ep0, CFG, (HUSB2_BF(EPT_SIZE, EP0_EPT_SIZE)
+				   | HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_CONTROL)
+				   | HUSB2_BF(BK_NUMBER, HUSB2_BK_NUMBER_ONE)));
+
+	husb2_ep_writel(ep0, CTL_ENB, HUSB2_BIT(RX_SETUP));
+	husb2_writel(udc, INT_ENB, (husb2_readl(udc, INT_ENB)
+				    | HUSB2_BF(EPT_INT, 1)));
+
+	if (!(husb2_ep_readl(ep0, CFG) & HUSB2_BIT(EPT_MAPPED)))
+		dev_warn(&udc->pdev->dev,
+		       "WARNING: EP0 configuration is invalid!\n");
+}
+
+static void udc_disable(struct husb2_udc *udc)
+{
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	husb2_writel(udc, CTRL, 0);
+}
+
+/*
+ * Called with interrupts disabled and udc->lock held.
+ */
+static void reset_all_endpoints(struct husb2_udc *udc)
+{
+	struct husb2_ep *ep;
+	struct husb2_request *req, *tmp_req;
+
+	husb2_writel(udc, EPT_RST, ~0UL);
+
+	ep = to_husb2_ep(udc->gadget.ep0);
+	list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
+		list_del_init(&req->queue);
+		request_complete(ep, req, -ECONNRESET);
+	}
+	BUG_ON(!list_empty(&ep->queue));
+
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		if (ep->desc)
+			husb2_ep_disable(&ep->ep);
+	}
+}
+
+static struct husb2_ep *get_ep_by_addr(struct husb2_udc *udc, u16 wIndex)
+{
+	struct husb2_ep *ep;
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return to_husb2_ep(udc->gadget.ep0);
+
+	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+		u8 bEndpointAddress;
+
+		if (!ep->desc)
+			continue;
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+		if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
+		    == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
+			return ep;
+	}
+
+	return NULL;
+}
+
+/* Called with interrupts disabled and udc->lock held */
+static inline void set_protocol_stall(struct husb2_udc *udc,
+				      struct husb2_ep *ep)
+{
+	husb2_ep_writel(ep, SET_STA, HUSB2_BIT(FORCE_STALL));
+	ep->state = WAIT_FOR_SETUP;
+}
+
+static inline int is_stalled(struct husb2_udc *udc, struct husb2_ep *ep)
+{
+	if (husb2_ep_readl(ep, STA) & HUSB2_BIT(FORCE_STALL))
+		return 1;
+	return 0;
+}
+
+static inline void set_address(struct husb2_udc *udc, unsigned int addr)
+{
+	u32 regval;
+
+	DBG(DBG_BUS, "setting address %u...\n", addr);
+	regval = husb2_readl(udc, CTRL);
+	regval = HUSB2_BFINS(DEV_ADDR, addr, regval);
+	husb2_writel(udc, CTRL, regval);
+}
+
+static int handle_ep0_setup(struct husb2_udc *udc, struct husb2_ep *ep,
+			    struct usb_ctrlrequest *crq)
+{
+	switch (crq->bRequest) {
+	case USB_REQ_GET_STATUS: {
+		u16 status;
+
+		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
+			/* Self-powered, no remote wakeup */
+			status = __constant_cpu_to_le16(1 << 0);
+		} else if (crq->bRequestType
+			   == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
+			status = __constant_cpu_to_le16(0);
+		} else if (crq->bRequestType
+			   == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
+			struct husb2_ep *target;
+
+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+			if (!target)
+				goto stall;
+
+			status = 0;
+			if (is_stalled(udc, target))
+				status |= __constant_cpu_to_le16(1);
+		} else {
+			goto delegate;
+		}
+
+		/* Write directly to the FIFO. No queueing is done. */
+		if(crq->wLength != __constant_cpu_to_le16(sizeof(status)))
+			goto stall;
+		ep->state = DATA_STAGE_IN;
+		__raw_writew(status, ep->fifo);
+		husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
+		break;
+	}
+
+	case USB_REQ_CLEAR_FEATURE: {
+		if (crq->bRequestType == USB_RECIP_DEVICE) {
+			/* We don't support TEST_MODE */
+			goto stall;
+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+			struct husb2_ep *target;
+
+			if (crq->wValue != __constant_cpu_to_le16(USB_ENDPOINT_HALT)
+			    || crq->wLength != __constant_cpu_to_le16(0))
+				goto stall;
+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+			if (!target)
+				goto stall;
+
+			husb2_ep_writel(target, CLR_STA, (HUSB2_BIT(FORCE_STALL)
+							  | HUSB2_BIT(TOGGLE_SEQ)));
+		} else {
+			goto delegate;
+		}
+
+		send_status(udc, ep);
+		break;
+	}
+
+	case USB_REQ_SET_FEATURE: {
+		if (crq->bRequestType == USB_RECIP_DEVICE) {
+			/* We don't support TEST_MODE */
+			goto stall;
+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+			struct husb2_ep *target;
+
+			if (crq->wValue != __constant_cpu_to_le16(USB_ENDPOINT_HALT)
+			    || crq->wLength != __constant_cpu_to_le16(0))
+				goto stall;
+
+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+			if (!target)
+				goto stall;
+
+			husb2_ep_writel(target, SET_STA, HUSB2_BIT(FORCE_STALL));
+		} else
+			goto delegate;
+
+		send_status(udc, ep);
+		break;
+	}
+
+	case USB_REQ_SET_ADDRESS:
+		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+			goto delegate;
+
+		set_address(udc, le16_to_cpu(crq->wValue));
+		send_status(udc, ep);
+		ep->state = STATUS_STAGE_ADDR;
+		break;
+
+	default:
+	delegate:
+		return udc->driver->setup(&udc->gadget, crq);
+	}
+
+	return 0;
+
+stall:
+	printk(KERN_ERR
+	       "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
+	       "halting endpoint...\n",
+	       ep_name(ep), crq->bRequestType, crq->bRequest,
+	       le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
+	       le16_to_cpu(crq->wLength));
+	set_protocol_stall(udc, ep);
+	return -1;
+}
+
+static void husb2_control_irq(struct husb2_udc *udc, struct husb2_ep *ep)
+{
+	struct husb2_request *req;
+	u32 epstatus;
+	u32 epctrl;
+
+restart:
+	epstatus = husb2_ep_readl(ep, STA);
+	epctrl = husb2_ep_readl(ep, CTL);
+
+	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
+	    ep_name(ep), epstatus);
+
+	req = NULL;
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+				 struct husb2_request, queue);
+
+	if ((epctrl & HUSB2_BIT(TX_PK_RDY))
+	    && !(epstatus & HUSB2_BIT(TX_PK_RDY))) {
+		DBG(DBG_BUS, "tx pk rdy: %d\n", ep->state);
+
+		if (req->submitted)
+			next_fifo_transaction(ep, req);
+		else
+			submit_request(ep, req);
+
+		if (req->last_transaction) {
+			husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
+		}
+		goto restart;
+	}
+	if ((epstatus & epctrl) & HUSB2_BIT(TX_COMPLETE)) {
+		husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(TX_COMPLETE));
+		DBG(DBG_BUS, "txc: %d\n", ep->state);
+
+		switch (ep->state) {
+		case DATA_STAGE_IN:
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(RX_BK_RDY));
+			husb2_ep_writel(ep, CTL_DIS,
+					HUSB2_BIT(TX_COMPLETE));
+			ep->state = STATUS_STAGE_OUT;
+			break;
+		case STATUS_STAGE_ADDR:
+			/* Activate our new address */
+			husb2_writel(udc, CTRL, (husb2_readl(udc, CTRL)
+						 | HUSB2_BIT(FADDR_EN)));
+			husb2_ep_writel(ep, CTL_DIS,
+					HUSB2_BIT(TX_COMPLETE));
+			ep->state = WAIT_FOR_SETUP;
+			break;
+		case STATUS_STAGE_IN:
+			if (req) {
+				list_del_init(&req->queue);
+				request_complete(ep, req, 0);
+				submit_next_request(ep);
+			}
+			BUG_ON(!list_empty(&ep->queue));
+			husb2_ep_writel(ep, CTL_DIS,
+					HUSB2_BIT(TX_COMPLETE));
+			ep->state = WAIT_FOR_SETUP;
+			break;
+		default:
+			printk(KERN_ERR
+			       "udc: %s: TXCOMP: Invalid endpoint state %d, "
+			       "halting endpoint...\n",
+			       ep_name(ep), ep->state);
+			set_protocol_stall(udc, ep);
+			break;
+		}
+
+		goto restart;
+	}
+	if ((epstatus & epctrl) & HUSB2_BIT(RX_BK_RDY)) {
+		DBG(DBG_BUS, "rxc: %d\n", ep->state);
+
+		switch (ep->state) {
+		case STATUS_STAGE_OUT:
+			husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
+
+			if (req) {
+				list_del_init(&req->queue);
+				request_complete(ep, req, 0);
+			}
+			husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(RX_BK_RDY));
+			ep->state = WAIT_FOR_SETUP;
+			break;
+
+		case DATA_STAGE_OUT:
+			receive_data(ep);
+			break;
+
+		default:
+			husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
+			set_protocol_stall(udc, ep);
+			printk(KERN_ERR
+			       "udc: %s: RXRDY: Invalid endpoint state %d, "
+			       "halting endpoint...\n",
+			       ep_name(ep), ep->state);
+			break;
+		}
+
+		goto restart;
+	}
+	if (epstatus & HUSB2_BIT(RX_SETUP)) {
+		union {
+			struct usb_ctrlrequest crq;
+			unsigned long data[2];
+		} crq;
+		unsigned int pkt_len;
+		int ret;
+
+		if (ep->state != WAIT_FOR_SETUP) {
+			/*
+			 * Didn't expect a SETUP packet at this
+			 * point. Clean up any pending requests (which
+			 * may be successful).
+			 */
+			int status = -EPROTO;
+
+			/*
+			 * RXRDY is dropped when SETUP packets arrive.
+			 * Just pretend we received the status packet.
+			 */
+			if (ep->state == STATUS_STAGE_OUT)
+				status = 0;
+
+			if (req) {
+				list_del_init(&req->queue);
+				request_complete(ep, req, status);
+			}
+			BUG_ON(!list_empty(&ep->queue));
+		}
+
+		pkt_len = HUSB2_BFEXT(BYTE_COUNT, husb2_ep_readl(ep, STA));
+		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
+		BUG_ON(pkt_len != sizeof(crq));
+
+		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
+		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
+
+		/* Free up one bank in the FIFO so that we can
+		 * generate or receive a reply right away. */
+		husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_SETUP));
+
+		/* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
+		       ep->state, crq.crq.bRequestType,
+		       crq.crq.bRequest); */
+
+		if (crq.crq.bRequestType & USB_DIR_IN) {
+			/*
+			 * The USB 2.0 spec states that "if wLength is
+			 * zero, there is no data transfer phase."
+			 * However, testusb #14 seems to actually
+			 * expect a data phase even if wLength = 0...
+			 */
+			ep->state = DATA_STAGE_IN;
+		} else {
+			if (crq.crq.wLength != __constant_cpu_to_le16(0))
+				ep->state = DATA_STAGE_OUT;
+			else
+				ep->state = STATUS_STAGE_IN;
+		}
+
+		ret = -1;
+		if (ep->index == 0)
+			ret = handle_ep0_setup(udc, ep, &crq.crq);
+		else
+			ret = udc->driver->setup(&udc->gadget, &crq.crq);
+
+		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
+		    crq.crq.bRequestType, crq.crq.bRequest,
+		    le16_to_cpu(crq.crq.wLength), ep->state, ret);
+
+		if (ret < 0) {
+			/* Let the host know that we failed */
+			set_protocol_stall(udc, ep);
+		}
+	}
+}
+
+static void husb2_ep_irq(struct husb2_udc *udc, struct husb2_ep *ep)
+{
+	struct husb2_request *req;
+	u32 epstatus;
+	u32 epctrl;
+
+	epstatus = husb2_ep_readl(ep, STA);
+	epctrl = husb2_ep_readl(ep, CTL);
+
+	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
+	    ep_name(ep), epstatus);
+
+	while ((epctrl & HUSB2_BIT(TX_PK_RDY))
+	       && !(epstatus & HUSB2_BIT(TX_PK_RDY))) {
+		BUG_ON(!ep_is_in(ep));
+
+		DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
+
+		if (list_empty(&ep->queue)) {
+			dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
+			husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
+			return;
+		}
+
+		req = list_entry(ep->queue.next, struct husb2_request, queue);
+
+		if (req->using_dma) {
+			BUG_ON(!req->send_zlp);
+
+			/* Send a zero-length packet */
+			husb2_ep_writel(ep, SET_STA,
+					HUSB2_BIT(TX_PK_RDY));
+			husb2_ep_writel(ep, CTL_DIS,
+					HUSB2_BIT(TX_PK_RDY));
+			list_del_init(&req->queue);
+			submit_next_request(ep);
+			request_complete(ep, req, 0);
+		} else {
+			if (req->submitted)
+				next_fifo_transaction(ep, req);
+			else
+				submit_request(ep, req);
+
+			if (req->last_transaction) {
+				list_del_init(&req->queue);
+				submit_next_request(ep);
+				request_complete(ep, req, 0);
+			}
+		}
+
+		epstatus = husb2_ep_readl(ep, STA);
+		epctrl = husb2_ep_readl(ep, CTL);
+	}
+	if ((epstatus & epctrl) & HUSB2_BIT(RX_BK_RDY)) {
+		BUG_ON(ep_is_in(ep));
+
+		DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
+		receive_data(ep);
+		husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
+	}
+}
+
+static void husb2_dma_irq(struct husb2_udc *udc, struct husb2_ep *ep)
+{
+	struct husb2_request *req;
+	u32 status, control, pending;
+
+	status = husb2_dma_readl(ep, STATUS);
+	control = husb2_dma_readl(ep, CONTROL);
+#ifdef CONFIG_DEBUG_FS
+	ep->last_dma_status = status;
+#endif
+	pending = status & control;
+	DBG(DBG_INT, "dma irq, status=%#08x, pending=%#08x, control=%#08x\n",
+	    status, pending, control);
+
+	BUG_ON(status & HUSB2_BIT(DMA_CH_EN));
+
+	if (list_empty(&ep->queue))
+		/* Might happen if a reset comes along at the right moment */
+		return;
+
+	if (pending & (HUSB2_BIT(DMA_END_TR_ST) | HUSB2_BIT(DMA_END_BUF_ST))) {
+		req = list_entry(ep->queue.next, struct husb2_request, queue);
+		husb2_update_req(ep, req, status);
+
+		if (req->send_zlp) {
+			husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
+		} else {
+			list_del_init(&req->queue);
+			submit_next_request(ep);
+			request_complete(ep, req, 0);
+		}
+	}
+}
+
+static irqreturn_t husb2_udc_irq(int irq, void *devid)
+{
+	struct husb2_udc *udc = devid;
+	u32 status;
+	u32 dma_status;
+	u32 ep_status;
+
+	spin_lock(&udc->lock);
+
+	status = husb2_readl(udc, INT_STA);
+	DBG(DBG_INT, "irq, status=%#08x\n", status);
+
+	if (status & HUSB2_BIT(DET_SUSPEND)) {
+		husb2_writel(udc, INT_CLR, HUSB2_BIT(DET_SUSPEND));
+		//DBG(DBG_BUS, "Suspend detected\n");
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
+		    && udc->driver && udc->driver->suspend)
+			udc->driver->suspend(&udc->gadget);
+	}
+
+	if (status & HUSB2_BIT(WAKE_UP)) {
+		husb2_writel(udc, INT_CLR, HUSB2_BIT(WAKE_UP));
+		//DBG(DBG_BUS, "Wake Up CPU detected\n");
+	}
+
+	if (status & HUSB2_BIT(END_OF_RESUME)) {
+		husb2_writel(udc, INT_CLR, HUSB2_BIT(END_OF_RESUME));
+		DBG(DBG_BUS, "Resume detected\n");
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
+		    && udc->driver && udc->driver->resume)
+			udc->driver->resume(&udc->gadget);
+	}
+
+	dma_status = HUSB2_BFEXT(DMA_INT, status);
+	if (dma_status) {
+		int i;
+
+		for (i = 1; i < HUSB2_NR_ENDPOINTS; i++)
+			if (dma_status & (1 << i))
+				husb2_dma_irq(udc, &husb2_ep[i]);
+	}
+
+	ep_status = HUSB2_BFEXT(EPT_INT, status);
+	if (ep_status) {
+		int i;
+
+		for (i = 0; i < HUSB2_NR_ENDPOINTS; i++)
+			if (ep_status & (1 << i)) {
+				if (ep_is_control(&husb2_ep[i]))
+					husb2_control_irq(udc, &husb2_ep[i]);
+				else
+					husb2_ep_irq(udc, &husb2_ep[i]);
+			}
+	}
+
+	if (status & HUSB2_BIT(END_OF_RESET)) {
+		husb2_writel(udc, INT_CLR, HUSB2_BIT(END_OF_RESET));
+		if (status & HUSB2_BIT(HIGH_SPEED)) {
+			DBG(DBG_BUS, "High-speed bus reset detected\n");
+			udc->gadget.speed = USB_SPEED_HIGH;
+		} else {
+			DBG(DBG_BUS, "Full-speed bus reset detected\n");
+			udc->gadget.speed = USB_SPEED_FULL;
+		}
+		/* Better start from scratch... */
+		reset_all_endpoints(udc);
+		husb2_ep[0].state = WAIT_FOR_SETUP;
+		udc_enable(udc);
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct husb2_udc *udc = &the_udc;
+	int ret;
+
+	spin_lock(&udc->lock);
+
+	ret = -ENODEV;
+	if (!udc->pdev)
+		goto out;
+	ret = -EBUSY;
+	if (udc->driver)
+		goto out;
+
+	udc->driver = driver;
+	udc->gadget.dev.driver = &driver->driver;
+
+	device_add(&udc->gadget.dev);
+	ret = driver->bind(&udc->gadget);
+	if (ret) {
+		DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
+		    driver->driver.name, ret);
+		device_del(&udc->gadget.dev);
+
+		udc->driver = NULL;
+		udc->gadget.dev.driver = NULL;
+		goto out;
+	}
+
+	/* TODO: Create sysfs files */
+
+	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
+	udc_enable(udc);
+
+out:
+	spin_unlock(&udc->lock);
+	return ret;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct husb2_udc *udc = &the_udc;
+	int ret;
+
+	spin_lock(&udc->lock);
+
+	ret = -ENODEV;
+	if (!udc->pdev)
+		goto out;
+	ret = -EINVAL;
+	if (driver != udc->driver)
+		goto out;
+
+	local_irq_disable();
+	udc_disable(udc);
+	local_irq_enable();
+
+	driver->unbind(&udc->gadget);
+	udc->driver = NULL;
+
+	device_del(&udc->gadget.dev);
+
+	/* TODO: Remove sysfs files */
+
+	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
+
+out:
+	spin_unlock(&udc->lock);
+	return ret;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int __devinit husb2_udc_probe(struct platform_device *pdev)
+{
+	struct resource *regs, *fifo;
+	struct clk *pclk, *hclk;
+	struct husb2_udc *udc = &the_udc;
+	int irq, ret, i;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
+	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
+	if (!regs || !fifo)
+		return -ENXIO;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+	hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(hclk)) {
+		ret = PTR_ERR(hclk);
+		goto out_put_pclk;
+	}
+
+	clk_enable(pclk);
+	clk_enable(hclk);
+
+	udc->pdev = pdev;
+	udc->pclk = pclk;
+	udc->hclk = hclk;
+
+	ret = -ENOMEM;
+	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!udc->regs) {
+		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
+		goto out_disable_clocks;
+	}
+	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
+		 (unsigned long)regs->start, udc->regs);
+	udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
+	if (!udc->fifo) {
+		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
+		goto out_unmap_regs;
+	}
+	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
+		 (unsigned long)fifo->start, udc->fifo);
+
+	device_initialize(&udc->gadget.dev);
+	udc->gadget.dev.parent = &pdev->dev;
+	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+
+	/* The 3-word descriptors must be 4-word aligned... */
+	udc->desc_pool = dma_pool_create("husb2-desc", &pdev->dev,
+					 sizeof(struct husb2_dma_desc),
+					 16, 0);
+	if (!udc->desc_pool) {
+		dev_err(&pdev->dev, "Cannot create descriptor DMA pool\n");
+		goto out_unmap_fifo;
+	}
+
+	platform_set_drvdata(pdev, udc);
+
+	udc_disable(udc);
+
+	INIT_LIST_HEAD(&husb2_ep[0].ep.ep_list);
+	husb2_ep[0].ep_regs = udc->regs + HUSB2_EPT_BASE(0);
+	husb2_ep[0].dma_regs = udc->regs + HUSB2_DMA_BASE(0);
+	husb2_ep[0].fifo = udc->fifo + HUSB2_FIFO_BASE(0);
+	for (i = 1; i < ARRAY_SIZE(husb2_ep); i++) {
+		struct husb2_ep *ep = &husb2_ep[i];
+
+		ep->ep_regs = udc->regs + HUSB2_EPT_BASE(i);
+		ep->dma_regs = udc->regs + HUSB2_DMA_BASE(i);
+		ep->fifo = udc->fifo + HUSB2_FIFO_BASE(i);
+
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+	}
+
+	ret = request_irq(irq, husb2_udc_irq, SA_SAMPLE_RANDOM,
+			  "husb2_udc", udc);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
+			irq, ret);
+		goto out_free_pool;
+	}
+	udc->irq = irq;
+
+	husb2_init_debugfs(udc);
+
+	return 0;
+
+out_free_pool:
+	dma_pool_destroy(udc->desc_pool);
+out_unmap_fifo:
+	iounmap(udc->fifo);
+out_unmap_regs:
+	iounmap(udc->regs);
+out_disable_clocks:
+	clk_disable(hclk);
+	clk_disable(pclk);
+	clk_put(hclk);
+out_put_pclk:
+	clk_put(pclk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return ret;
+}
+
+static int __devexit husb2_udc_remove(struct platform_device *pdev)
+{
+	struct husb2_udc *udc;
+
+	udc = platform_get_drvdata(pdev);
+	if (!udc)
+		return 0;
+
+	husb2_cleanup_debugfs(udc);
+
+	free_irq(udc->irq, udc);
+	dma_pool_destroy(udc->desc_pool);
+	iounmap(udc->fifo);
+	iounmap(udc->regs);
+	clk_disable(udc->hclk);
+	clk_disable(udc->pclk);
+	clk_put(udc->hclk);
+	clk_put(udc->pclk);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver udc_driver = {
+	.probe		= husb2_udc_probe,
+	.remove		= __devexit_p(husb2_udc_remove),
+	.driver		= {
+		.name		= "usba",
+	},
+};
+
+static int __init udc_init(void)
+{
+	printk(KERN_INFO "husb2device: Driver version %s\n", DRIVER_VERSION);
+	return platform_driver_register(&udc_driver);
+}
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+	platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION("Atmel HUSB2 Device Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.h linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.h
--- linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,406 @@
+/*
+ * Driver for the Atmel HUSB2device high speed USB device controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_USB_GADGET_HUSB2_UDC_H__
+#define __LINUX_USB_GADGET_HUSB2_UDC_H__
+
+/* USB register offsets */
+#define HUSB2_CTRL				0x0000
+#define HUSB2_FNUM				0x0004
+#define HUSB2_INT_ENB				0x0010
+#define HUSB2_INT_STA				0x0014
+#define HUSB2_INT_CLR				0x0018
+#define HUSB2_EPT_RST				0x001c
+#define HUSB2_TST_SOF_CNT			0x00d0
+#define HUSB2_TST_CNT_A				0x00d4
+#define HUSB2_TST_CNT_B				0x00d8
+#define HUSB2_TST_MODE_REG			0x00dc
+#define HUSB2_TST				0x00f0
+
+/* USB endpoint register offsets */
+#define HUSB2_EPT_CFG				0x0000
+#define HUSB2_EPT_CTL_ENB			0x0004
+#define HUSB2_EPT_CTL_DIS			0x0008
+#define HUSB2_EPT_CTL				0x000c
+#define HUSB2_EPT_SET_STA			0x0014
+#define HUSB2_EPT_CLR_STA			0x0018
+#define HUSB2_EPT_STA				0x001c
+
+/* USB DMA register offsets */
+#define HUSB2_DMA_NXT_DSC			0x0000
+#define HUSB2_DMA_ADDRESS			0x0004
+#define HUSB2_DMA_CONTROL			0x0008
+#define HUSB2_DMA_STATUS			0x000c
+
+/* Bitfields in CTRL */
+#define HUSB2_DEV_ADDR_OFFSET			0
+#define HUSB2_DEV_ADDR_SIZE			7
+#define HUSB2_FADDR_EN_OFFSET			7
+#define HUSB2_FADDR_EN_SIZE			1
+#define HUSB2_EN_HUSB2_OFFSET			8
+#define HUSB2_EN_HUSB2_SIZE			1
+#define HUSB2_DETACH_OFFSET			9
+#define HUSB2_DETACH_SIZE			1
+#define HUSB2_REMOTE_WAKE_UP_OFFSET		10
+#define HUSB2_REMOTE_WAKE_UP_SIZE		1
+
+/* Bitfields in FNUM */
+#define HUSB2_MICRO_FRAME_NUM_OFFSET		0
+#define HUSB2_MICRO_FRAME_NUM_SIZE		3
+#define HUSB2_FRAME_NUMBER_OFFSET		3
+#define HUSB2_FRAME_NUMBER_SIZE			11
+#define HUSB2_FRAME_NUM_ERROR_OFFSET		31
+#define HUSB2_FRAME_NUM_ERROR_SIZE		1
+
+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
+#define HUSB2_HIGH_SPEED_OFFSET			0
+#define HUSB2_HIGH_SPEED_SIZE			1
+#define HUSB2_DET_SUSPEND_OFFSET		1
+#define HUSB2_DET_SUSPEND_SIZE			1
+#define HUSB2_MICRO_SOF_OFFSET			2
+#define HUSB2_MICRO_SOF_SIZE			1
+#define HUSB2_SOF_OFFSET			3
+#define HUSB2_SOF_SIZE				1
+#define HUSB2_END_OF_RESET_OFFSET		4
+#define HUSB2_END_OF_RESET_SIZE			1
+#define HUSB2_WAKE_UP_OFFSET			5
+#define HUSB2_WAKE_UP_SIZE			1
+#define HUSB2_END_OF_RESUME_OFFSET		6
+#define HUSB2_END_OF_RESUME_SIZE		1
+#define HUSB2_UPSTREAM_RESUME_OFFSET		7
+#define HUSB2_UPSTREAM_RESUME_SIZE		1
+#define HUSB2_EPT_INT_OFFSET			8
+#define HUSB2_EPT_INT_SIZE			16
+#define HUSB2_DMA_INT_OFFSET			24
+#define HUSB2_DMA_INT_SIZE			8
+
+/* Bitfields in EPT_RST */
+#define HUSB2_RST_OFFSET			0
+#define HUSB2_RST_SIZE				16
+
+/* Bitfields in TST_SOF_CNT */
+#define HUSB2_SOF_CNT_MAX_OFFSET		0
+#define HUSB2_SOF_CNT_MAX_SIZE			7
+#define HUSB2_SOF_CNT_LOAD_OFFSET		7
+#define HUSB2_SOF_CNT_LOAD_SIZE			1
+
+/* Bitfields in TST_CNT_A */
+#define HUSB2_CNT_A_MAX_OFFSET			0
+#define HUSB2_CNT_A_MAX_SIZE			7
+#define HUSB2_CNT_A_LOAD_OFFSET			7
+#define HUSB2_CNT_A_LOAD_SIZE			1
+
+/* Bitfields in TST_CNT_B */
+#define HUSB2_CNT_B_MAX_OFFSET			0
+#define HUSB2_CNT_B_MAX_SIZE			7
+#define HUSB2_CNT_B_LOAD_OFFSET			7
+#define HUSB2_CNT_B_LOAD_SIZE			1
+
+/* Bitfields in TST_MODE_REG */
+#define HUSB2_TST_MODE_OFFSET			0
+#define HUSB2_TST_MODE_SIZE			6
+
+/* Bitfields in HUSB2_TST */
+#define HUSB2_SPEED_CFG_OFFSET			0
+#define HUSB2_SPEED_CFG_SIZE			2
+#define HUSB2_TST_J_MODE_OFFSET			2
+#define HUSB2_TST_J_MODE_SIZE			1
+#define HUSB2_TST_K_MODE_OFFSET			3
+#define HUSB2_TST_K_MODE_SIZE			1
+#define HUSB2_TST_PKT_MODE_OFFSE		4
+#define HUSB2_TST_PKT_MODE_SIZE			1
+#define HUSB2_OPMODE2_OFFSET			5
+#define HUSB2_OPMODE2_SIZE			1
+
+/* Bitfields in EPT_CFG */
+#define HUSB2_EPT_SIZE_OFFSET			0
+#define HUSB2_EPT_SIZE_SIZE			3
+#define HUSB2_EPT_DIR_OFFSET			3
+#define HUSB2_EPT_DIR_SIZE			1
+#define HUSB2_EPT_TYPE_OFFSET			4
+#define HUSB2_EPT_TYPE_SIZE			2
+#define HUSB2_BK_NUMBER_OFFSET			6
+#define HUSB2_BK_NUMBER_SIZE			2
+#define HUSB2_NB_TRANS_OFFSET			8
+#define HUSB2_NB_TRANS_SIZE			2
+#define HUSB2_EPT_MAPPED_OFFSET			31
+#define HUSB2_EPT_MAPPED_SIZE			1
+
+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
+#define HUSB2_EPT_ENABLE_OFFSET			0
+#define HUSB2_EPT_ENABLE_SIZE			1
+#define HUSB2_AUTO_VALID_OFFSET			1
+#define HUSB2_AUTO_VALID_SIZE			1
+#define HUSB2_INT_DIS_DMA_OFFSET		3
+#define HUSB2_INT_DIS_DMA_SIZE			1
+#define HUSB2_NYET_DIS_OFFSET			4
+#define HUSB2_NYET_DIS_SIZE			1
+#define HUSB2_DATAX_RX_OFFSET			6
+#define HUSB2_DATAX_RX_SIZE			1
+#define HUSB2_MDATA_RX_OFFSET			7
+#define HUSB2_MDATA_RX_SIZE			1
+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
+#define HUSB2_BUSY_BANK_IE_OFFSET		18
+#define HUSB2_BUSY_BANK_IE_SIZE			1
+
+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
+#define HUSB2_FORCE_STALL_OFFSET		5
+#define HUSB2_FORCE_STALL_SIZE			1
+#define HUSB2_TOGGLE_SEQ_OFFSET			6
+#define HUSB2_TOGGLE_SEQ_SIZE			2
+#define HUSB2_ERR_OVFLW_OFFSET			8
+#define HUSB2_ERR_OVFLW_SIZE			1
+#define HUSB2_RX_BK_RDY_OFFSET			9
+#define HUSB2_RX_BK_RDY_SIZE			1
+#define HUSB2_KILL_BANK_OFFSET			9
+#define HUSB2_KILL_BANK_SIZE			1
+#define HUSB2_TX_COMPLETE_OFFSET		10
+#define HUSB2_TX_COMPLETE_SIZE			1
+#define HUSB2_TX_PK_RDY_OFFSET			11
+#define HUSB2_TX_PK_RDY_SIZE			1
+#define HUSB2_ISO_ERR_TRANS_OFFSET		11
+#define HUSB2_ISO_ERR_TRANS_SIZE		1
+#define HUSB2_RX_SETUP_OFFSET			12
+#define HUSB2_RX_SETUP_SIZE			1
+#define HUSB2_ISO_ERR_FLOW_OFFSET		12
+#define HUSB2_ISO_ERR_FLOW_SIZE			1
+#define HUSB2_STALL_SENT_OFFSET			13
+#define HUSB2_STALL_SENT_SIZE			1
+#define HUSB2_ISO_ERR_CRC_OFFSET		13
+#define HUSB2_ISO_ERR_CRC_SIZE			1
+#define HUSB2_ISO_ERR_NBTRANS_OFFSET		13
+#define HUSB2_ISO_ERR_NBTRANS_SIZE		1
+#define HUSB2_NAK_IN_OFFSET			14
+#define HUSB2_NAK_IN_SIZE			1
+#define HUSB2_ISO_ERR_FLUSH_OFFSET		14
+#define HUSB2_ISO_ERR_FLUSH_SIZE		1
+#define HUSB2_NAK_OUT_OFFSET			15
+#define HUSB2_NAK_OUT_SIZE			1
+#define HUSB2_CURRENT_BANK_OFFSET		16
+#define HUSB2_CURRENT_BANK_SIZE			2
+#define HUSB2_BUSY_BANKS_OFFSET			18
+#define HUSB2_BUSY_BANKS_SIZE			2
+#define HUSB2_BYTE_COUNT_OFFSET			20
+#define HUSB2_BYTE_COUNT_SIZE			11
+#define HUSB2_SHORT_PACKET_OFFSET		31
+#define HUSB2_SHORT_PACKET_SIZE			1
+
+/* Bitfields in DMA_CONTROL */
+#define HUSB2_DMA_CH_EN_OFFSET			0
+#define HUSB2_DMA_CH_EN_SIZE			1
+#define HUSB2_DMA_LINK_OFFSET			1
+#define HUSB2_DMA_LINK_SIZE			1
+#define HUSB2_DMA_END_TR_EN_OFFSET		2
+#define HUSB2_DMA_END_TR_EN_SIZE		1
+#define HUSB2_DMA_END_BUF_EN_OFFSET		3
+#define HUSB2_DMA_END_BUF_EN_SIZE		1
+#define HUSB2_DMA_END_TR_IE_OFFSET		4
+#define HUSB2_DMA_END_TR_IE_SIZE		1
+#define HUSB2_DMA_END_BUF_IE_OFFSET		5
+#define HUSB2_DMA_END_BUF_IE_SIZE		1
+#define HUSB2_DMA_DESC_LOAD_IE_OFFSET		6
+#define HUSB2_DMA_DESC_LOAD_IE_SIZE		1
+#define HUSB2_DMA_BURST_LOCK_OFFSET		7
+#define HUSB2_DMA_BURST_LOCK_SIZE		1
+#define HUSB2_DMA_BUF_LEN_OFFSET		16
+#define HUSB2_DMA_BUF_LEN_SIZE			16
+
+/* Bitfields in DMA_STATUS */
+#define HUSB2_DMA_CH_ACTIVE_OFFSET		1
+#define HUSB2_DMA_CH_ACTIVE_SIZE		1
+#define HUSB2_DMA_END_TR_ST_OFFSET		4
+#define HUSB2_DMA_END_TR_ST_SIZE		1
+#define HUSB2_DMA_END_BUF_ST_OFFSET		5
+#define HUSB2_DMA_END_BUF_ST_SIZE		1
+#define HUSB2_DMA_DESC_LOAD_ST_OFFSET		6
+#define HUSB2_DMA_DESC_LOAD_ST_SIZE		1
+
+/* Constants for SPEED_CFG */
+#define HUSB2_SPEED_CFG_NORMAL			0
+#define HUSB2_SPEED_CFG_FORCE_HIGH		2
+#define HUSB2_SPEED_CFG_FORCE_FULL		3
+
+/* Constants for EPT_SIZE */
+#define HUSB2_EPT_SIZE_8			0
+#define HUSB2_EPT_SIZE_16			1
+#define HUSB2_EPT_SIZE_32			2
+#define HUSB2_EPT_SIZE_64			3
+#define HUSB2_EPT_SIZE_128			4
+#define HUSB2_EPT_SIZE_256			5
+#define HUSB2_EPT_SIZE_512			6
+#define HUSB2_EPT_SIZE_1024			7
+
+/* Constants for EPT_TYPE */
+#define HUSB2_EPT_TYPE_CONTROL			0
+#define HUSB2_EPT_TYPE_ISO			1
+#define HUSB2_EPT_TYPE_BULK			2
+#define HUSB2_EPT_TYPE_INT			3
+
+/* Constants for BK_NUMBER */
+#define HUSB2_BK_NUMBER_ZERO			0
+#define HUSB2_BK_NUMBER_ONE			1
+#define HUSB2_BK_NUMBER_DOUBLE			2
+#define HUSB2_BK_NUMBER_TRIPLE			3
+
+/* Bit manipulation macros */
+#define HUSB2_BIT(name)						\
+	(1 << HUSB2_##name##_OFFSET)
+#define HUSB2_BF(name,value)					\
+	(((value) & ((1 << HUSB2_##name##_SIZE) - 1))		\
+	 << HUSB2_##name##_OFFSET)
+#define HUSB2_BFEXT(name,value)					\
+	(((value) >> HUSB2_##name##_OFFSET)			\
+	 & ((1 << HUSB2_##name##_SIZE) - 1))
+#define HUSB2_BFINS(name,value,old)				\
+	(((old) & ~(((1 << HUSB2_##name##_SIZE) - 1)		\
+		    << HUSB2_##name##_OFFSET))			\
+	 | HUSB2_BF(name,value))
+
+/* Register access macros */
+#define husb2_readl(udc,reg)					\
+	__raw_readl((udc)->regs + HUSB2_##reg)
+#define husb2_writel(udc,reg,value)				\
+	__raw_writel((value), (udc)->regs + HUSB2_##reg)
+#define husb2_ep_readl(ep,reg)					\
+	__raw_readl((ep)->ep_regs + HUSB2_EPT_##reg)
+#define husb2_ep_writel(ep,reg,value)				\
+	__raw_writel((value), (ep)->ep_regs + HUSB2_EPT_##reg)
+#define husb2_dma_readl(ep,reg)					\
+	__raw_readl((ep)->dma_regs + HUSB2_DMA_##reg)
+#define husb2_dma_writel(ep,reg,value)				\
+	__raw_writel((value), (ep)->dma_regs + HUSB2_DMA_##reg)
+
+/* Calculate base address for a given endpoint or DMA controller */
+#define HUSB2_EPT_BASE(x)			(0x100 + (x) * 0x20)
+#define HUSB2_DMA_BASE(x)			(0x300 + (x) * 0x10)
+#define HUSB2_FIFO_BASE(x)			((x) << 16)
+
+/* Synth parameters */
+#define HUSB2_NR_ENDPOINTS	7
+
+#define EP0_FIFO_SIZE		64
+#define EP0_EPT_SIZE		HUSB2_EPT_SIZE_64
+#define EP0_NR_BANKS		1
+#define BULK_FIFO_SIZE		512
+#define BULK_EPT_SIZE		HUSB2_EPT_SIZE_512
+#define BULK_NR_BANKS		2
+#define ISO_FIFO_SIZE		1024
+#define ISO_EPT_SIZE		HUSB2_EPT_SIZE_1024
+#define ISO_NR_BANKS		3
+#define INT_FIFO_SIZE		64
+#define INT_EPT_SIZE		HUSB2_EPT_SIZE_64
+#define INT_NR_BANKS		3
+
+enum husb2_ctrl_state {
+	WAIT_FOR_SETUP,
+	DATA_STAGE_IN,
+	DATA_STAGE_OUT,
+	STATUS_STAGE_IN,
+	STATUS_STAGE_OUT,
+	STATUS_STAGE_ADDR,
+};
+/*
+  EP_STATE_IDLE,
+  EP_STATE_SETUP,
+  EP_STATE_IN_DATA,
+  EP_STATE_OUT_DATA,
+  EP_STATE_SET_ADDR_STATUS,
+  EP_STATE_RX_STATUS,
+  EP_STATE_TX_STATUS,
+  EP_STATE_HALT,
+*/
+
+struct husb2_dma_desc {
+	dma_addr_t next;
+	dma_addr_t addr;
+	u32 ctrl;
+};
+
+struct husb2_ep {
+	int					state;
+	void __iomem				*ep_regs;
+	void __iomem				*dma_regs;
+	void __iomem				*fifo;
+	struct usb_ep				ep;
+	struct husb2_udc			*udc;
+
+	struct list_head			queue;
+	const struct usb_endpoint_descriptor	*desc;
+
+	u16					fifo_size;
+	u8					nr_banks;
+	u8					index;
+	u8					capabilities;
+
+#ifdef CONFIG_DEBUG_FS
+	u32					last_dma_status;
+	struct dentry				*debugfs_dir;
+	struct dentry				*debugfs_queue;
+	struct dentry				*debugfs_dma_status;
+#endif
+};
+#define HUSB2_EP_CAP_ISOC	0x0001
+#define HUSB2_EP_CAP_DMA	0x0002
+
+struct husb2_packet {
+	struct husb2_dma_desc			*desc;
+	dma_addr_t				desc_dma;
+};
+
+struct husb2_request {
+	struct usb_request			req;
+	struct list_head			queue;
+
+	struct husb2_packet			*packet;
+	unsigned int				nr_pkts;
+
+	unsigned int				submitted:1;
+	unsigned int				using_dma:1;
+	unsigned int				last_transaction:1;
+	unsigned int				send_zlp:1;
+};
+
+struct husb2_udc {
+	spinlock_t lock;
+
+	void __iomem *regs;
+	void __iomem *fifo;
+
+	struct dma_pool *desc_pool;
+
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct platform_device *pdev;
+	int irq;
+	struct clk *pclk;
+	struct clk *hclk;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_root;
+	struct dentry *debugfs_regs;
+#endif
+};
+
+#define to_husb2_ep(x) container_of((x), struct husb2_ep, ep)
+#define to_husb2_req(x) container_of((x), struct husb2_request, req)
+#define to_husb2_udc(x) container_of((x), struct husb2_udc, gadget)
+
+#define ep_index(ep)	((ep)->index)
+#define ep_can_dma(ep)	((ep)->capabilities & HUSB2_EP_CAP_DMA)
+#define ep_is_in(ep)	(((ep)->desc->bEndpointAddress			\
+				 & USB_ENDPOINT_DIR_MASK)		\
+			 == USB_DIR_IN)
+#define ep_is_isochronous(ep)						\
+	(((ep)->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)	\
+	 == USB_ENDPOINT_XFER_ISOC)
+#define ep_is_control(ep) (ep_index(ep) == 0)
+#define ep_name(ep)	((ep)->ep.name)
+#define ep_is_idle(ep)	((ep)->state == EP_STATE_IDLE)
+
+#endif /* __LINUX_USB_GADGET_HUSB2_H */
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/Kconfig linux-2.6.20.4-atmel/drivers/usb/gadget/Kconfig
--- linux-2.6.20.4-0rig/drivers/usb/gadget/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -154,6 +154,16 @@
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_HUSB2DEV
+	boolean "Atmel HUSB2DEVICE"
+	select USB_GADGET_DUALSPEED
+	depends on AVR32
+
+config USB_HUSB2DEV
+	tristate
+	depends on USB_GADGET_HUSB2DEV
+	default USB_GADGET
+	select USB_GADGET_SELECTED
 
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/Makefile linux-2.6.20.4-atmel/drivers/usb/gadget/Makefile
--- linux-2.6.20.4-0rig/drivers/usb/gadget/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -8,6 +8,7 @@
 obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
+obj-$(CONFIG_USB_HUSB2DEV)	+= husb2_udc.o
 
 #
 # USB gadget drivers
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/serial.c linux-2.6.20.4-atmel/drivers/usb/gadget/serial.c
--- linux-2.6.20.4-0rig/drivers/usb/gadget/serial.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/serial.c	2007-03-24 16:42:28.000000000 +0100
@@ -333,7 +333,7 @@
 	.strings =		gs_strings,
 };
 
-static struct usb_device_descriptor gs_device_desc = {
+static struct usb_device_descriptor __attribute__((aligned(2))) gs_device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
 	.bcdUSB =		__constant_cpu_to_le16(0x0200),
@@ -353,7 +353,7 @@
 	.bmAttributes =		USB_OTG_SRP,
 };
 
-static struct usb_config_descriptor gs_bulk_config_desc = {
+static struct usb_config_descriptor __attribute__((aligned(2))) gs_bulk_config_desc = {
 	.bLength =		USB_DT_CONFIG_SIZE,
 	.bDescriptorType =	USB_DT_CONFIG,
 	/* .wTotalLength computed dynamically */
@@ -364,7 +364,7 @@
 	.bMaxPower =		1,
 };
 
-static struct usb_config_descriptor gs_acm_config_desc = {
+static struct usb_config_descriptor __attribute__((aligned(2))) gs_acm_config_desc = {
 	.bLength =		USB_DT_CONFIG_SIZE,
 	.bDescriptorType =	USB_DT_CONFIG,
 	/* .wTotalLength computed dynamically */
@@ -375,7 +375,7 @@
 	.bMaxPower =		1,
 };
 
-static const struct usb_interface_descriptor gs_bulk_interface_desc = {
+static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_bulk_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	.bInterfaceNumber =	GS_BULK_INTERFACE_ID,
@@ -386,7 +386,7 @@
 	.iInterface =		GS_DATA_STR_ID,
 };
 
-static const struct usb_interface_descriptor gs_control_interface_desc = {
+static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_control_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	.bInterfaceNumber =	GS_CONTROL_INTERFACE_ID,
@@ -397,7 +397,7 @@
 	.iInterface =		GS_CONTROL_STR_ID,
 };
 
-static const struct usb_interface_descriptor gs_data_interface_desc = {
+static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_data_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	.bInterfaceNumber =	GS_DATA_INTERFACE_ID,
@@ -408,7 +408,7 @@
 	.iInterface =		GS_DATA_STR_ID,
 };
 
-static const struct usb_cdc_header_desc gs_header_desc = {
+static const struct usb_cdc_header_desc __attribute__((aligned(2))) gs_header_desc = {
 	.bLength =		sizeof(gs_header_desc),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
@@ -438,7 +438,7 @@
 	.bSlaveInterface0 =	1,	/* index of data interface */
 };
  
-static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
@@ -447,14 +447,14 @@
 	.bInterval =		1 << GS_LOG2_NOTIFY_INTERVAL,
 };
 
-static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_OUT,
@@ -484,7 +484,7 @@
 };
 
 #ifdef CONFIG_USB_GADGET_DUALSPEED
-static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
@@ -493,21 +493,21 @@
 	.bInterval =		GS_LOG2_NOTIFY_INTERVAL+4,
 };
 
-static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	__constant_cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	__constant_cpu_to_le16(512),
 };
 
-static struct usb_qualifier_descriptor gs_qualifier_desc = {
+static struct usb_qualifier_descriptor __attribute__((aligned(2))) gs_qualifier_desc = {
 	.bLength =		sizeof(struct usb_qualifier_descriptor),
 	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
 	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/zero.c linux-2.6.20.4-atmel/drivers/usb/gadget/zero.c
--- linux-2.6.20.4-0rig/drivers/usb/gadget/zero.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/gadget/zero.c	2007-03-24 16:42:28.000000000 +0100
@@ -221,7 +221,7 @@
 #define	CONFIG_LOOPBACK		2
 
 static struct usb_device_descriptor
-device_desc = {
+device_desc __attribute__((aligned(2))) = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
@@ -237,7 +237,7 @@
 };
 
 static struct usb_config_descriptor
-source_sink_config = {
+source_sink_config __attribute__((aligned(2))) = {
 	.bLength =		sizeof source_sink_config,
 	.bDescriptorType =	USB_DT_CONFIG,
 
@@ -250,7 +250,7 @@
 };
 
 static struct usb_config_descriptor
-loopback_config = {
+loopback_config __attribute__((aligned(2))) = {
 	.bLength =		sizeof loopback_config,
 	.bDescriptorType =	USB_DT_CONFIG,
 
@@ -273,7 +273,7 @@
 /* one interface in each configuration */
 
 static const struct usb_interface_descriptor
-source_sink_intf = {
+source_sink_intf __attribute__((aligned(2))) = {
 	.bLength =		sizeof source_sink_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -283,7 +283,7 @@
 };
 
 static const struct usb_interface_descriptor
-loopback_intf = {
+loopback_intf __attribute__((aligned(2))) = {
 	.bLength =		sizeof loopback_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -295,7 +295,7 @@
 /* two full speed bulk endpoints; their use is config-dependent */
 
 static struct usb_endpoint_descriptor
-fs_source_desc = {
+fs_source_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -304,7 +304,7 @@
 };
 
 static struct usb_endpoint_descriptor
-fs_sink_desc = {
+fs_sink_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -340,7 +340,7 @@
  */
 
 static struct usb_endpoint_descriptor
-hs_source_desc = {
+hs_source_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -349,7 +349,7 @@
 };
 
 static struct usb_endpoint_descriptor
-hs_sink_desc = {
+hs_sink_desc __attribute__((aligned(2))) = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -358,7 +358,7 @@
 };
 
 static struct usb_qualifier_descriptor
-dev_qualifier = {
+dev_qualifier __attribute__((aligned(2))) = {
 	.bLength =		sizeof dev_qualifier,
 	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
 
diff -urN linux-2.6.20.4-0rig/drivers/usb/host/ohci-at91.c linux-2.6.20.4-atmel/drivers/usb/host/ohci-at91.c
--- linux-2.6.20.4-0rig/drivers/usb/host/ohci-at91.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/usb/host/ohci-at91.c	2007-03-24 16:39:15.000000000 +0100
@@ -18,19 +18,38 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
 /* interface and function clocks */
-static struct clk *iclk, *fclk;
+static struct clk *iclk, *fclk, *hclock;
 static int clocked;
 
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
 
+static void at91_start_clock(void)
+{
+	if (cpu_is_at91sam9261())
+		clk_enable(hclock);
+	clk_enable(iclk);
+	clk_enable(fclk);
+	clocked = 1;
+}
+
+static void at91_stop_clock(void)
+{
+	clk_disable(fclk);
+	clk_disable(iclk);
+	if (cpu_is_at91sam9261())
+		clk_disable(hclock);
+	clocked = 0;
+}
+
 static void at91_start_hc(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -41,9 +60,7 @@
 	/*
 	 * Start the USB clocks.
 	 */
-	clk_enable(iclk);
-	clk_enable(fclk);
-	clocked = 1;
+	at91_start_clock();
 
 	/*
 	 * The USB host controller must remain in reset.
@@ -66,9 +83,7 @@
 	/*
 	 * Stop the USB clocks.
 	 */
-	clk_disable(fclk);
-	clk_disable(iclk);
-	clocked = 0;
+	at91_stop_clock();
 }
 
 
@@ -126,6 +141,8 @@
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
+	if (cpu_is_at91sam9261())
+		hclock = clk_get(&pdev->dev, "hck0");
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -137,6 +154,8 @@
 	/* Error handling */
 	at91_stop_hc(pdev);
 
+	if (cpu_is_at91sam9261())
+		clk_put(hclock);
 	clk_put(fclk);
 	clk_put(iclk);
 
@@ -170,11 +189,12 @@
 	at91_stop_hc(pdev);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	disable_irq_wake(hcd->irq);
 
+	if (cpu_is_at91sam9261())
+		clk_put(hclock);
 	clk_put(fclk);
 	clk_put(iclk);
-	fclk = iclk = NULL;
+	fclk = iclk = hclock = NULL;
 
 	dev_set_drvdata(&pdev->dev, NULL);
 	return 0;
@@ -271,8 +291,6 @@
 
 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(hcd->irq);
-	else
-		disable_irq_wake(hcd->irq);
 
 	/*
 	 * The integrated transceivers seem unable to notice disconnect,
@@ -283,9 +301,7 @@
 	 */
 	if (at91_suspend_entering_slow_clock()) {
 		ohci_usb_reset (ohci);
-		clk_disable(fclk);
-		clk_disable(iclk);
-		clocked = 0;
+		at91_stop_clock();
 	}
 
 	return 0;
@@ -293,11 +309,13 @@
 
 static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 {
-	if (!clocked) {
-		clk_enable(iclk);
-		clk_enable(fclk);
-		clocked = 1;
-	}
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(hcd->irq);
+
+	if (!clocked)
+		at91_start_clock();
 
 	return 0;
 }
diff -urN linux-2.6.20.4-0rig/drivers/video/atmel_lcdfb.c linux-2.6.20.4-atmel/drivers/video/atmel_lcdfb.c
--- linux-2.6.20.4-0rig/drivers/video/atmel_lcdfb.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/atmel_lcdfb.c	2007-03-24 16:39:15.000000000 +0100
@@ -0,0 +1,781 @@
+/*
+ *  drivers/video/atmel_lcdfb.c
+ *
+ *  Driver for AT91/AVR32 LCD Controller
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+
+#include <video/atmel_lcdc.h>
+
+#define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
+#define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
+
+/* More or less configurable parameters */
+#define ATMEL_LCDC_FIFO_SIZE		512
+#define ATMEL_LCDC_CRST_VAL_DEFAULT	0xc8
+#define ATMEL_LCDC_DMA_BURST_LEN	16
+
+#define LCD_POWER_ON	0
+#define LCD_POWER_OFF	1
+
+#if defined(CONFIG_ARCH_AT91)
+static inline void atmel_lcdfb_update_dma2d(struct fb_info *info,
+					struct fb_var_screeninfo *var) { }
+static inline void atmel_lcdfb_set_2dcfg(struct fb_info *info) { }
+#elif defined(CONFIG_AVR32)
+static void atmel_lcdfb_update_dma2d(struct fb_info *info,
+					struct fb_var_screeninfo *var)
+{
+	dma2dcfg = lcdc_readl(sinfo, ATMEL_LCDC_DMA2DCFG);
+	dma2dcfg = LCDC_INSBF(DMA2DCFG_PIXELOFF, pixeloff, dma2dcfg);
+	lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
+
+	/* Update configuration */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
+		lcdc_readl(sinfo, ATMEL_LCDC_DMACON) | LCDC_BIT(DMACON_DMAUPDT));
+}
+
+static void atmel_lcdfb_set_2dcfg(struct fb_info *info)
+{
+	/* ...set 2D configuration (necessary for xres_virtual != xres) */
+	value = LCDC_MKBF(DMA2DCFG_ADDRINC,
+			  info->var.xres_virtual - info->var.xres);
+	lcdc_writel(sinfo, DMA2DCFG, value);
+
+	/* ...wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & LCDC_BIT(DMACON_DMABUSY))
+		msleep(10);
+}
+#endif
+
+
+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.xpanstep	= 0,
+	.ypanstep	= 0,
+	.ywrapstep	= 0,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static u32 pseudo_palette[16] = {
+	0x000000,
+	0xaa0000,
+	0x00aa00,
+	0xaa5500,
+	0x0000aa,
+	0xaa00aa,
+	0x00aaaa,
+	0xaaaaaa,
+	0x555555,
+	0xff5555,
+	0x55ff55,
+	0xffff55,
+	0x5555ff,
+	0xff55ff,
+	0x55ffff,
+	0xffffff
+};
+
+static void atmel_lcdfb_update_dma(struct fb_info *info,
+			       struct fb_var_screeninfo *var)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	struct fb_fix_screeninfo *fix = &info->fix;
+	unsigned long dma_addr;
+
+	dma_addr = (fix->smem_start + var->yoffset * fix->line_length
+		    + var->xoffset * var->bits_per_pixel / 8);
+
+	dma_addr &= ~3UL;
+
+	/* Set framebuffer DMA base address and pixel offset */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
+
+	atmel_lcdfb_update_dma2d(info, var);
+}
+
+static inline void atmel_lcdfb_unmap_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+
+	dma_free_writecombine(info->device, sinfo->map_size,
+				sinfo->map_cpu, sinfo->map_dma);
+}
+
+/**
+ *	atmel_lcdfb_alloc_framebuffer - Allocate framebuffer memory
+ *	@sinfo: the frame buffer to allocate memory for
+ */
+static int atmel_lcdfb_map_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	sinfo->map_size = (var->xres_virtual * var->yres_virtual
+			    * ((var->bits_per_pixel + 7) / 8));
+
+	sinfo->map_cpu = dma_alloc_writecombine(info->device, sinfo->map_size,
+					      &sinfo->map_dma, GFP_KERNEL);
+
+	if (!sinfo->map_cpu) {
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ *      atmel_lcdfb_check_var - Validates a var passed in.
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Checks to see if the hardware supports the state requested by
+ *	var passed in. This function does not alter the hardware
+ *	state!!!  This means the data stored in struct fb_info and
+ *	struct atmel_lcdfb_info do not change. This includes the var
+ *	inside of struct fb_info.  Do NOT change these. This function
+ *	can be called on its own if we intent to only test a mode and
+ *	not actually set it. The stuff in modedb.c is a example of
+ *	this. If the var passed in is slightly off by what the
+ *	hardware can support then we alter the var PASSED in to what
+ *	we can do. If the hardware doesn't support mode change a
+ *	-EINVAL will be returned by the upper layers. You don't need
+ *	to implement this function then. If you hardware doesn't
+ *	support changing the resolution then this function is not
+ *	needed. In this case the driver would just provide a var that
+ *	represents the static state the screen is in.
+ *
+ *	Returns negative errno on error, or zero on success.
+ */
+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct device *dev = info->device;
+	struct atmel_lcdfb_info *sinfo = info->par;
+	unsigned long clk_value_khz = 0;
+
+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+	dev_dbg(dev, "%s:\n", __func__);
+	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
+	dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
+	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
+	dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
+
+	if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
+		dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
+		return -EINVAL;
+	}
+
+	/* Force same alignment for each line */
+	var->xres = (var->xres + 3) & ~3UL;
+	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
+
+	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
+	var->transp.offset = var->transp.length = 0;
+
+	switch (var->bits_per_pixel) {
+	case 2:
+	case 4:
+	case 8:
+		var->red.offset = var->green.offset = var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length
+			= var->bits_per_pixel;
+		break;
+	case 15:
+	case 16:
+		var->red.offset = 0;
+		var->green.offset = 5;
+		var->blue.offset = 10;
+		var->red.length = var->green.length = var->blue.length = 5;
+		break;
+	case 24:
+	case 32:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	default:
+		dev_err(dev, "color depth %d not supported\n",
+					var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	var->xoffset = var->yoffset = 0;
+	var->red.msb_right = var->green.msb_right = var->blue.msb_right =
+		var->transp.msb_right = 0;
+
+	return 0;
+}
+
+/**
+ *      atmel_lcdfb_set_par - Alters the hardware state.
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Using the fb_var_screeninfo in fb_info we set the resolution
+ *	of the this particular framebuffer. This function alters the
+ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
+ *	not alter var in fb_info since we are using that data. This
+ *	means we depend on the data in var inside fb_info to be
+ *	supported by the hardware.  atmel_lcdfb_check_var is always called
+ *	before atmel_lcdfb_set_par to ensure this.  Again if you can't
+ *	change the resolution you don't need this function.
+ *
+ */
+static int atmel_lcdfb_set_par(struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	unsigned long value;
+	unsigned long clk_value_khz = 0;
+
+	dev_dbg(info->device, "%s:\n", __func__);
+	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
+		 info->var.xres, info->var.yres,
+		 info->var.xres_virtual, info->var.yres_virtual);
+
+	/* Turn off the LCD controller and the DMA controller */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+
+	/* Reset LCDC DMA*/
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
+
+	if (info->var.bits_per_pixel <= 8)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
+
+	/* Re-initialize the DMA engine... */
+	dev_dbg(info->device, "  * update DMA engine\n");
+	atmel_lcdfb_update_dma(info, &info->var);
+
+	/* ...set frame size and burst length = 8 words (?) */
+	value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
+	value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
+	lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
+
+	atmel_lcdfb_set_2dcfg(info);
+
+	/* Now, the LCDC core... */
+
+	/* Set pixel clock */
+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
+
+	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+		value++;
+
+	value = (value / 2) - 1;
+
+	if (value == 0) {
+		dev_notice(info->device, "Bypassing pixel clock divider\n");
+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+	} else
+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
+
+	/* Initialize control register 2 */
+	value = sinfo->default_lcdcon2;
+
+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+		value |= ATMEL_LCDC_INVLINE_INVERTED;
+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+		value |= ATMEL_LCDC_INVFRAME_INVERTED;
+
+	switch (info->var.bits_per_pixel) {
+		case 1:	value |= ATMEL_LCDC_PIXELSIZE_1; break;
+		case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
+		case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
+		case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
+		case 15: /* fall through */
+		case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
+		case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
+		case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
+		default: BUG(); break;
+	}
+	dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
+
+	/* Vertical timing */
+	value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
+	value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
+	value |= info->var.lower_margin;
+	dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
+
+	/* Horizontal timing */
+	value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
+	value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
+	value |= (info->var.left_margin - 1);
+	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+
+	/* Display size */
+	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+	value |= info->var.yres - 1;
+	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+
+	/* FIFO Threshold: Use formula from data sheet */
+	value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
+	lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
+
+	/* Toggle LCD_MODE every frame */
+	lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
+
+	/* Disable all interrupts */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
+	// Set contrast
+	value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CRST_VAL_DEFAULT);
+	/* ...wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+
+	dev_dbg(info->device, "  * re-enable DMA engine\n");
+	/* ...and enable it with updated configuration */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+
+	dev_dbg(info->device, "  * re-enable LCDC core\n");
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+
+	dev_dbg(info->device, "  * DONE\n");
+
+	return 0;
+}
+
+static inline u_int chan_to_field(u_int chan, const struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+/**
+ *  	atmel_lcdfb_setcolreg - Optional function. Sets a color register.
+ *      @regno: Which register in the CLUT we are programming
+ *      @red: The red value which can be up to 16 bits wide
+ *	@green: The green value which can be up to 16 bits wide
+ *	@blue:  The blue value which can be up to 16 bits wide.
+ *	@transp: If supported the alpha value which can be up to 16 bits wide.
+ *      @info: frame buffer info structure
+ *
+ *  	Set a single color register. The values supplied have a 16 bit
+ *  	magnitude which needs to be scaled in this function for the hardware.
+ *	Things to take into consideration are how many color registers, if
+ *	any, are supported with the current color visual. With truecolor mode
+ *	no color palettes are supported. Here a psuedo palette is created
+ *	which we store the value in pseudo_palette in struct fb_info. For
+ *	pseudocolor mode we have a limited color palette. To deal with this
+ *	we can program what color is displayed for a particular pixel value.
+ *	DirectColor is similar in that we can program each color field. If
+ *	we have a static colormap we don't need to implement this function.
+ *
+ *	Returns negative errno on error, or zero on success. In an
+ *	ideal world, this would have been the case, but as it turns
+ *	out, the other drivers return 1 on failure, so that's what
+ *	we're going to do.
+ */
+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
+			     unsigned int green, unsigned int blue,
+			     unsigned int transp, struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	unsigned int val;
+	u32 *pal;
+	int ret = 1;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green
+				      + 7471 * blue) >> 16;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno < 256) {
+			val  = ((red   >> 11) & 0x001f);
+			val |= ((green >>  6) & 0x03e0);
+			val |= ((blue  >>  1) & 0x7c00);
+
+			/*
+			 * TODO: intensity bit. Maybe something like
+			 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
+			 */
+
+			lcdc_writel(sinfo, ATMEL_LCDC_LUT_(regno), val);
+			ret = 0;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	dev_dbg(info->device, "%s\n", __func__);
+
+	atmel_lcdfb_update_dma(info, var);
+
+	return 0;
+}
+
+static struct fb_ops atmel_lcdfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= atmel_lcdfb_check_var,
+	.fb_set_par	= atmel_lcdfb_set_par,
+	.fb_setcolreg	= atmel_lcdfb_setcolreg,
+	.fb_pan_display	= atmel_lcdfb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
+{
+	struct fb_info *info = dev_id;
+	struct atmel_lcdfb_info *sinfo = info->par;
+	u32 status;
+
+	status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
+	return IRQ_HANDLED;
+}
+
+static int atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	int ret = 0;
+
+	info->screen_base = sinfo->map_cpu;
+	info->fix.smem_start = sinfo->map_dma;
+	info->fix.smem_len = sinfo->map_size;
+
+	memset(info->screen_base, 0, info->fix.smem_len);
+	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+	dev_info(info->device,
+	       "%luKiB frame buffer at %08lx (mapped at %p)\n",
+	       (unsigned long)info->fix.smem_len / 1024,
+	       (unsigned long)info->fix.smem_start,
+	       info->screen_base);
+
+	/* Allocate colormap */
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret < 0)
+		dev_err(info->device, "Alloc color map failed\n");
+
+	return ret;
+}
+
+static int atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
+{
+	int ret = 0;
+
+	if (sinfo->bus_clk && !IS_ERR(sinfo->bus_clk))
+		clk_enable(sinfo->bus_clk);
+	else {
+		if (cpu_is_at91sam9261()) {
+			/* not an error for other cpus */
+			ret = -ENXIO;
+		}
+	}
+
+	if (sinfo->lcdc_clk && !IS_ERR(sinfo->lcdc_clk))
+		clk_enable(sinfo->lcdc_clk);
+	else
+		ret = -ENXIO;
+
+	return ret;
+}
+
+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
+{
+	if (sinfo->bus_clk && !IS_ERR(sinfo->bus_clk))
+		clk_disable(sinfo->bus_clk);
+	if (sinfo->lcdc_clk && !IS_ERR(sinfo->lcdc_clk))
+		clk_disable(sinfo->lcdc_clk);
+}
+
+
+static int atmel_lcdfb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fb_info *info;
+	struct atmel_lcdfb_info *sinfo;
+	struct resource *regs = NULL;
+	struct resource *map = NULL;
+	int ret;
+
+	dev_dbg(dev, "%s BEGIN\n", __func__);
+
+	ret = -ENOMEM;
+	info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
+	if (!info) {
+		dev_err(dev, "cannot allocate memory\n");
+		goto out;
+	}
+
+	sinfo = info->par;
+	memcpy(sinfo, dev->platform_data, sizeof(struct atmel_lcdfb_info));
+	sinfo->info = info;
+	sinfo->pdev = pdev;
+
+	strcpy(info->fix.id, sinfo->pdev->name);
+	info->flags = sinfo->default_flags;
+	info->pseudo_palette = pseudo_palette;
+	info->fbops = &atmel_lcdfb_ops;
+
+	memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
+	info->fix = atmel_lcdfb_fix;
+
+	/* Enable LCDC Clocks */
+	if (cpu_is_at91sam9261())
+		sinfo->bus_clk = clk_get(dev, "hck1");
+	sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
+	if (atmel_lcdfb_start_clock(sinfo)) {
+		dev_err(dev, "unable to clock LCDC\n");
+		goto free_info;
+	}
+
+	ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
+			info->monspecs.modedb_len, info->monspecs.modedb,
+			sinfo->default_bpp);
+	if (!ret) {
+		dev_err(dev, "no suitable video mode found\n");
+		goto stop_clk;
+	}
+
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "resources unusable\n");
+		ret = -ENXIO;
+		goto stop_clk;
+	}
+
+	sinfo->irq_base = platform_get_irq(pdev, 0);
+	if (sinfo->irq_base < 0) {
+		dev_err(dev, "unable to get irq\n");
+		ret = sinfo->irq_base;
+		goto stop_clk;
+	}
+
+	/* Initialize video memory */
+	map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (map) {
+		/* use a pre-allocated memory buffer */
+		sinfo->map_dma = map->start;
+		sinfo->map_size = map->end - map->start + 1;
+		if (!request_mem_region(sinfo->map_dma,
+					sinfo->map_size, pdev->name)) {
+			ret = -EBUSY;
+			goto stop_clk;
+		}
+
+		sinfo->map_cpu = ioremap(sinfo->map_dma, sinfo->map_size);
+		if (!sinfo->map_cpu)
+			goto release_intmem;
+	} else {
+		/* alocate memory buffer */
+		ret = atmel_lcdfb_map_video_memory(sinfo);
+		if (ret < 0) {
+			dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
+			goto stop_clk;
+		}
+	}
+
+	/* LCDC registers */
+	info->fix.mmio_start = regs->start;
+	info->fix.mmio_len = regs->end - regs->start + 1;
+
+	if (!request_mem_region(info->fix.mmio_start,
+				info->fix.mmio_len, pdev->name)) {
+		ret = -EBUSY;
+		goto free_fb;
+	}
+
+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
+	if (!sinfo->mmio) {
+		dev_err(dev, "cannot map LCDC registers\n");
+		goto release_mem;
+	}
+
+	/* interrupt */
+	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+	if (ret) {
+		dev_err(dev, "request_irq failed: %d\n", ret);
+		goto unmap_mmio;
+	}
+
+	ret = atmel_lcdfb_init_fbinfo(sinfo);
+	if (ret < 0) {
+		dev_err(dev, "init fbinfo failed: %d\n", ret);
+		goto unregister_irqs;
+	}
+
+	/*
+	 * This makes sure that our colour bitfield
+	 * descriptors are correctly initialised.
+	 */
+	atmel_lcdfb_check_var(&info->var, info);
+	atmel_lcdfb_set_par(info);
+
+	ret = fb_set_var(info, &info->var);
+	if (ret) {
+		dev_warn(dev, "unable to set display parameters\n");
+		goto free_cmap;
+	}
+
+	dev_set_drvdata(dev, info);
+
+	/*
+	 * Tell the world that we're ready to go
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
+		goto free_cmap;
+	}
+
+	/* Power up the LCDC screen */
+	if (sinfo->power_control_pin)
+		at91_set_gpio_value(sinfo->power_control_pin, LCD_POWER_ON);
+
+	dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
+		       info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
+
+	return 0;
+
+
+free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+unregister_irqs:
+	free_irq(sinfo->irq_base, info);
+unmap_mmio:
+	iounmap(sinfo->mmio);
+release_mem:
+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+free_fb:
+	if (map) {
+		iounmap(sinfo->map_cpu);
+	} else {
+		atmel_lcdfb_unmap_video_memory(sinfo);
+	}
+
+release_intmem:
+	if (map) {
+		release_mem_region(sinfo->map_dma, sinfo->map_size);
+	}
+stop_clk:
+	atmel_lcdfb_stop_clock(sinfo);
+free_info:
+	framebuffer_release(info);
+out:
+	dev_dbg(dev, "%s FAILED\n", __func__);
+	return ret;
+}
+
+static int atmel_lcdfb_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct atmel_lcdfb_info *sinfo = info->par;
+
+	if (!sinfo)
+		return 0;
+
+	if (sinfo->power_control_pin)
+		at91_set_gpio_value(sinfo->power_control_pin, LCD_POWER_OFF);
+	unregister_framebuffer(info);
+	atmel_lcdfb_stop_clock(sinfo);
+	fb_dealloc_cmap(&info->cmap);
+	free_irq(sinfo->irq_base, info);
+	iounmap(sinfo->mmio);
+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+	if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
+		iounmap(sinfo->map_cpu);
+		release_mem_region(sinfo->map_dma, sinfo->map_size);
+	} else {
+		atmel_lcdfb_unmap_video_memory(sinfo);
+	}
+
+	dev_set_drvdata(dev, NULL);
+	framebuffer_release(info);
+
+	return 0;
+}
+
+static struct platform_driver atmel_lcdfb_driver = {
+	.probe		= atmel_lcdfb_probe,
+	.remove		= atmel_lcdfb_remove,
+	.driver		= {
+		.name	= "atmel_lcdfb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init atmel_lcdfb_init(void)
+{
+	return platform_driver_register(&atmel_lcdfb_driver);
+}
+
+static void __exit atmel_lcdfb_exit(void)
+{
+	platform_driver_unregister(&atmel_lcdfb_driver);
+}
+
+module_init(atmel_lcdfb_init);
+module_exit(atmel_lcdfb_exit);
+
+MODULE_AUTHOR("Atmel Corporation");
+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/Kconfig linux-2.6.20.4-atmel/drivers/video/backlight/Kconfig
--- linux-2.6.20.4-0rig/drivers/video/backlight/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/backlight/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -42,6 +42,18 @@
 	depends on LCD_CLASS_DEVICE
 	default y
 
+config LCD_LTV350QV
+	tristate "Samsung LTV350QV LCD Panel"
+	depends on LCD_DEVICE && SPI
+	default n
+	help
+	  If you have a Samsung LTV350QV LCD panel, say y to include a
+	  power control driver for it.  The panel starts up in power
+	  off state, so you need this driver in order to see any
+	  output.
+
+	  The LTV350QV panel is present on most ATSTK1000 boards.
+
 config BACKLIGHT_CORGI
 	tristate "Sharp Corgi Backlight Driver (SL Series)"
 	depends on BACKLIGHT_DEVICE && PXA_SHARPSL
diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/ltv350qv.c linux-2.6.20.4-atmel/drivers/video/backlight/ltv350qv.c
--- linux-2.6.20.4-0rig/drivers/video/backlight/ltv350qv.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/backlight/ltv350qv.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,300 @@
+/*
+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/spi/spi.h>
+
+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
+
+struct ltv350qv {
+	struct spi_device *spi;
+	u8 *buffer;
+	int power;
+	struct semaphore lock;
+	struct lcd_device *ld;
+	struct list_head list;
+	int halt_done;
+};
+
+static LIST_HEAD(lcd_list);
+
+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
+{
+	struct spi_message msg;
+	struct spi_transfer index_xfer = {
+		.len		= 3,
+		.cs_change	= 1,
+	};
+	struct spi_transfer value_xfer = {
+		.len		= 3,
+		.cs_change	= 1,
+	};
+
+	spi_message_init(&msg);
+
+	/* register index */
+	lcd->buffer[0] = 0x74;
+	lcd->buffer[1] = 0x00;
+	lcd->buffer[2] = reg & 0x7f;
+	index_xfer.tx_buf = lcd->buffer;
+	spi_message_add_tail(&index_xfer, &msg);
+
+	/* register value */
+	lcd->buffer[4] = 0x76;
+	lcd->buffer[5] = val >> 8;
+	lcd->buffer[6] = val;
+	value_xfer.tx_buf = lcd->buffer + 4;
+	spi_message_add_tail(&value_xfer, &msg);
+
+	return spi_sync(lcd->spi, &msg);
+}
+
+#define write_reg(_spi, reg, val)				\
+	do {							\
+		ret = ltv350qv_write_reg(_spi, reg, val);	\
+		if (ret)					\
+			goto out;				\
+	} while (0)
+
+static int ltv350qv_power_on(struct ltv350qv *lcd)
+{
+	int ret;
+
+	write_reg(lcd,  9, 0x0000);
+	msleep(15);
+	write_reg(lcd,  9, 0x4000);
+	write_reg(lcd, 10, 0x2000);
+	write_reg(lcd,  9, 0x4055);
+	msleep(55);
+	write_reg(lcd,  1, 0x409d);
+	write_reg(lcd,  2, 0x0204);
+	write_reg(lcd,  3, 0x0100);
+	write_reg(lcd,  4, 0x3000);
+	write_reg(lcd,  5, 0x4003);
+	write_reg(lcd,  6, 0x000a);
+	write_reg(lcd,  7, 0x0021);
+	write_reg(lcd,  8, 0x0c00);
+	write_reg(lcd, 10, 0x0103);
+	write_reg(lcd, 11, 0x0301);
+	write_reg(lcd, 12, 0x1f0f);
+	write_reg(lcd, 13, 0x1f0f);
+	write_reg(lcd, 14, 0x0707);
+	write_reg(lcd, 15, 0x0307);
+	write_reg(lcd, 16, 0x0707);
+	write_reg(lcd, 17, 0x0000);
+	write_reg(lcd, 18, 0x0004);
+	write_reg(lcd, 19, 0x0000);
+
+	msleep(20);
+	write_reg(lcd,  9, 0x4a55);
+	write_reg(lcd,  5, 0x5003);
+
+out:
+	return ret;
+}
+
+static int ltv350qv_power_off(struct ltv350qv *lcd)
+{
+	int ret;
+
+	/* GON -> 0, POC -> 0 */
+	write_reg(lcd,  9, 0x4055);
+	/* DSC -> 0 */
+	write_reg(lcd,  5, 0x4003);
+	/* VCOMG -> 0 */
+	write_reg(lcd, 10, 0x2103);
+
+	msleep(1);
+
+	/* AP[2:0] -> 000 */
+	write_reg(lcd,  9, 0x4050);
+
+out:
+	return ret;
+}
+
+static int ltv350qv_power(struct ltv350qv *lcd, int power)
+{
+	int ret = 0;
+
+	down(&lcd->lock);
+
+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+		ret = ltv350qv_power_on(lcd);
+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+		ret = ltv350qv_power_off(lcd);
+
+	if (!ret)
+		lcd->power = power;
+
+	up(&lcd->lock);
+
+	return ret;
+}
+
+static int ltv350qv_set_power(struct lcd_device *ld, int power)
+{
+	struct ltv350qv *lcd;
+
+	lcd = class_get_devdata(&ld->class_dev);
+	return ltv350qv_power(lcd, power);
+}
+
+static int ltv350qv_get_power(struct lcd_device *ld)
+{
+	struct ltv350qv *lcd;
+
+	lcd = class_get_devdata(&ld->class_dev);
+	return lcd->power;
+}
+
+static struct lcd_properties lcd_properties = {
+	.owner		= THIS_MODULE,
+	.get_power	= ltv350qv_get_power,
+	.set_power	= ltv350qv_set_power,
+};
+
+static int __devinit ltv350qv_probe(struct spi_device *spi)
+{
+	struct ltv350qv *lcd;
+	struct lcd_device *ld;
+	int ret;
+
+	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
+	if (!lcd)
+		return -ENOMEM;
+
+	lcd->spi = spi;
+	lcd->power = FB_BLANK_POWERDOWN;
+	init_MUTEX(&lcd->lock);
+	lcd->buffer = kzalloc(8, GFP_KERNEL);
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret)
+		goto out_free_lcd;
+
+	ld = lcd_device_register("ltv350qv", lcd, &lcd_properties);
+	if (IS_ERR(ld)) {
+		ret = PTR_ERR(ld);
+		goto out_free_lcd;
+	}
+	lcd->ld = ld;
+
+	list_add(&lcd->list, &lcd_list);
+
+	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
+	if (ret)
+		goto out_unregister;
+
+	dev_set_drvdata(&spi->dev, lcd);
+
+	return 0;
+
+out_unregister:
+	lcd_device_unregister(ld);
+out_free_lcd:
+	kfree(lcd);
+	return ret;
+}
+
+static int __devexit ltv350qv_remove(struct spi_device *spi)
+{
+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
+
+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
+	list_del(&lcd->list);
+	lcd_device_unregister(lcd->ld);
+	kfree(lcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ltv350qv_suspend(struct spi_device *spi,
+			    pm_message_t state, u32 level)
+{
+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
+
+	if (level == SUSPEND_POWER_DOWN)
+		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
+
+	return 0;
+}
+
+static int ltv350qv_resume(struct spi_device *spi, u32 level)
+{
+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
+
+	if (level == RESUME_POWER_ON)
+		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
+
+	return 0;
+}
+#else
+#define ltv350qv_suspend	NULL
+#define ltv350qv_resume		NULL
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+static int ltv350qv_halt(struct notifier_block *nb, unsigned long event,
+			 void *p)
+{
+	struct ltv350qv *lcd;
+
+	list_for_each_entry(lcd, &lcd_list, list) {
+		if (!lcd->halt_done)
+			ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
+		lcd->halt_done = 1;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct spi_driver ltv350qv_driver = {
+	.driver = {
+		.name		= "ltv350qv",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= ltv350qv_probe,
+	.remove		= __devexit_p(ltv350qv_remove),
+	.suspend	= ltv350qv_suspend,
+	.resume		= ltv350qv_resume,
+};
+
+static struct notifier_block ltv350qv_notifier = {
+	.notifier_call	= ltv350qv_halt,
+};
+
+static int __init ltv350qv_init(void)
+{
+	register_reboot_notifier(&ltv350qv_notifier);
+	return spi_register_driver(&ltv350qv_driver);
+}
+
+static void __exit ltv350qv_exit(void)
+{
+	unregister_reboot_notifier(&ltv350qv_notifier);
+	spi_unregister_driver(&ltv350qv_driver);
+}
+module_init(ltv350qv_init);
+module_exit(ltv350qv_exit);
+
+MODULE_AUTHOR("Atmel Norway");
+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/Makefile linux-2.6.20.4-atmel/drivers/video/backlight/Makefile
--- linux-2.6.20.4-0rig/drivers/video/backlight/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/backlight/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -5,3 +5,4 @@
 obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
diff -urN linux-2.6.20.4-0rig/drivers/video/fbmem.c linux-2.6.20.4-atmel/drivers/video/fbmem.c
--- linux-2.6.20.4-0rig/drivers/video/fbmem.c	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/fbmem.c	2007-03-24 16:42:29.000000000 +0100
@@ -1199,6 +1199,10 @@
 	pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
 #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+#elif defined(__avr32__)
+	vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
+				      & ~_PAGE_CACHABLE)
+				     | (_PAGE_BUFFER | _PAGE_DIRTY));
 #elif defined(__ia64__)
 	if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
 		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
diff -urN linux-2.6.20.4-0rig/drivers/video/Kconfig linux-2.6.20.4-atmel/drivers/video/Kconfig
--- linux-2.6.20.4-0rig/drivers/video/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -276,6 +276,28 @@
 	  If you plan to use the LCD display with your SA-1100 system, say
 	  Y here.
 
+config FB_SIDSA
+	tristate "SIDSA LCDC support"
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	depends on FB && AVR32
+	help
+	  This enables support for the SIDSA LCD Controller.
+
+config FB_SIDSA_DEFAULT_BPP
+	int "SIDSA LCDC default color depth"
+	default 24
+	depends on FB_SIDSA
+	help
+	  Specify the maximum color depth you want to be able to
+	  support. This, together with the resolution of the LCD
+	  panel, determines the amount of framebuffer memory allocated
+	  when the driver is initialized.
+
+	  Allowable values are 1, 2, 4, 8, 16, 24 and 32. If unsure,
+	  say 24.
+
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
 	depends on FB && ARM && ARCH_IMX
@@ -698,6 +720,22 @@
 	  working with S1D13806). Product specs at
 	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
 
+config FB_ATMEL
+	tristate "AT91/AT32 LCD Controller support"
+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+	bool "Frame Buffer in internal SRAM"
+	depends on FB_ATMEL && ARCH_AT91SAM9261
+	help
+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+	  to let frame buffer in external SDRAM.
+
 config FB_NVIDIA
 	tristate "nVidia Framebuffer Support"
 	depends on FB && PCI
diff -urN linux-2.6.20.4-0rig/drivers/video/Makefile linux-2.6.20.4-atmel/drivers/video/Makefile
--- linux-2.6.20.4-0rig/drivers/video/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -78,6 +78,7 @@
 obj-$(CONFIG_FB_SUN3)             += sun3fb.o
 obj-$(CONFIG_FB_HIT)              += hitfb.o
 obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
+obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
 obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
 obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
@@ -100,6 +101,7 @@
 obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
 obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+obj-$(CONFIG_FB_SIDSA)		  += sidsafb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_VESA)             += vesafb.o
diff -urN linux-2.6.20.4-0rig/drivers/video/sidsafb.c linux-2.6.20.4-atmel/drivers/video/sidsafb.c
--- linux-2.6.20.4-0rig/drivers/video/sidsafb.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/drivers/video/sidsafb.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,860 @@
+/*
+ * Framebuffer Driver for Atmel/SIDSA LCD Controller
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+
+#include <asm/periph/lcdc.h>
+
+/* More or less configurable parameters */
+#define SIDSAFB_FIFO_SIZE		512
+#define SIDSAFB_DMA_BURST_LEN		8
+
+/* TODO: These should be autogenerated from part description file */
+#define LCDC_DISTYPE_STN_MONO		0
+#define LCDC_DISTYPE_STN_COLOR		1
+#define LCDC_DISTYPE_TFT		2
+#define LCDC_LUT			0xc00
+
+struct sidsafb_info {
+	spinlock_t		lock;
+	struct fb_info *	info;
+	void __iomem *		regs;
+	unsigned long		irq_base;
+	int			wait_for_vsync;
+	struct completion	vsync_complete;
+	unsigned int		guard_time;
+	struct clk		*hclk;
+	struct clk		*pixclk;
+	struct platform_device	*pdev;
+	u32			pseudo_palette[16];
+};
+
+/*
+ * How large framebuffer to allocate if none was provided by the
+ * platform. This default is the smallest we can possibly get away
+ * with.
+ */
+static unsigned long fb_size = (320 * 240);
+
+#if 0
+static struct fb_videomode sony_modes[] = {
+	{
+		.refresh	= 48,
+		.xres		= 240,		.yres		= 160,
+		.pixclock	= 520833,
+
+		.left_margin	= 7,		.right_margin	= 9,
+		.upper_margin	= 19,		.lower_margin	= 20,
+		.hsync_len	= 9,		.vsync_len	= 2,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+#endif
+
+#if 0
+static struct fb_videomode vga_modes[] = {
+	{
+		.refresh	= 122,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= 80000,
+
+		.left_margin	= 10,		.right_margin	= 20,
+		.upper_margin	= 30,		.lower_margin	= 5,
+		.hsync_len	= 20,		.vsync_len	= 3,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	{
+		.refresh	= 70,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= 40000,
+
+		.left_margin	= 10,		.right_margin	= 20,
+		.upper_margin	= 30,		.lower_margin	= 5,
+		.hsync_len	= 20,		.vsync_len	= 3,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+#else
+static struct fb_videomode samsung_modes[] = {
+	{
+		.refresh	= 75,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= 145111,
+
+		.left_margin	= 17,		.right_margin	= 33,
+		.upper_margin	= 10,		.lower_margin	= 10,
+		.hsync_len	= 16,		.vsync_len	= 1,
+
+		.sync		= FB_SYNC_PCLK_RISING,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+#endif
+
+#if 1
+static struct fb_monspecs default_monspecs = {
+	.modedb		= samsung_modes,
+	.manufacturer	= "SNG",
+	.monitor	= "LCD panel",
+	.serial_no	= "xxxx",
+	.ascii		= "yyyy",
+	.modedb_len	= ARRAY_SIZE(samsung_modes),
+	.hfmin		= 14820,
+	.hfmax		= 22230,
+	.vfmin		= 60,
+	.vfmax		= 90,
+	.dclkmax	= 30000000,
+};
+#endif
+
+#if 0
+static struct fb_monspecs default_monspecs = {
+	.modedb		= sony_modes,
+	.manufacturer	= "SNY",	/* 4 chars?!? */
+	.monitor	= "LCD panel",
+	.serial_no	= "xxxx",
+	.ascii		= "yyyy",
+	.modedb_len	= ARRAY_SIZE(sony_modes),
+	.hfmin		= 7000,
+	.hfmax		= 8000,
+	.vfmin		= 45,
+	.vfmax		= 50,
+};
+// #else
+static struct fb_monspecs default_monspecs = {
+	.modedb		= vga_modes,
+	.manufacturer	= "VGA",
+	.monitor	= "Generic VGA",
+	.serial_no	= "xxxx",
+	.ascii		= "yyyy",
+	.modedb_len	= ARRAY_SIZE(vga_modes),
+	.hfmin		= 30000,
+	.hfmax		= 64000,
+	.vfmin		= 50,
+	.vfmax		= 150,
+};
+#endif
+
+/* Driver defaults */
+static struct fb_fix_screeninfo sidsafb_fix __devinitdata = {
+	.id		= "sidsafb",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.xpanstep	= 1,
+	.ypanstep	= 1,
+	.ywrapstep	= 0,
+	.accel		= FB_ACCEL_NONE,
+};
+
+/*
+ * Let the user decide whether FBIOPAN_DISPLAY waits for the next
+ * vsync or not.
+ */
+static ssize_t
+vsync_pan_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct sidsafb_info *sinfo = info->par;
+
+	return sprintf(buf, "%d\n", sinfo->wait_for_vsync);
+}
+
+static ssize_t
+vsync_pan_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct sidsafb_info *sinfo = info->par;
+	unsigned long val;
+
+	val = simple_strtoul(buf, NULL, 0);
+	if (val)
+		sinfo->wait_for_vsync = 1;
+	else
+		sinfo->wait_for_vsync = 0;
+
+	return count;
+}
+
+static DEVICE_ATTR(vsync_pan, 0644, vsync_pan_show, vsync_pan_store);
+
+static void sidsafb_update_dma(struct fb_info *info,
+			       struct fb_var_screeninfo *var)
+{
+	struct sidsafb_info *sinfo = info->par;
+	struct fb_fix_screeninfo *fix = &info->fix;
+	unsigned long dma_addr;
+	unsigned long pixeloff;
+	unsigned long dma2dcfg;
+
+	dma_addr = (fix->smem_start + var->yoffset * fix->line_length
+		    + var->xoffset * var->bits_per_pixel / 8);
+
+	dma_addr &= ~3UL;
+	pixeloff = LCDC_MKBF(DMA2DCFG_PIXELOFF, var->xoffset * var->bits_per_pixel);
+
+	/* Set framebuffer DMA base address and pixel offset */
+	lcdc_writel(sinfo, DMABADDR1, dma_addr);
+	dma2dcfg = lcdc_readl(sinfo, DMA2DCFG);
+	dma2dcfg = LCDC_INSBF(DMA2DCFG_PIXELOFF, pixeloff, dma2dcfg);
+	lcdc_writel(sinfo, DMA2DCFG, dma2dcfg);
+
+	/* Update configuration */
+	lcdc_writel(sinfo, DMACON, (lcdc_readl(sinfo, DMACON)
+				    | LCDC_BIT(DMACON_DMAUPDT)));
+}
+
+/**
+ *      sidsafb_check_var - Validates a var passed in.
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Checks to see if the hardware supports the state requested by
+ *	var passed in. This function does not alter the hardware
+ *	state!!!  This means the data stored in struct fb_info and
+ *	struct sidsafb_info do not change. This includes the var
+ *	inside of struct fb_info.  Do NOT change these. This function
+ *	can be called on its own if we intent to only test a mode and
+ *	not actually set it. The stuff in modedb.c is a example of
+ *	this. If the var passed in is slightly off by what the
+ *	hardware can support then we alter the var PASSED in to what
+ *	we can do. If the hardware doesn't support mode change a
+ *	-EINVAL will be returned by the upper layers. You don't need
+ *	to implement this function then. If you hardware doesn't
+ *	support changing the resolution then this function is not
+ *	needed. In this case the driver would just provide a var that
+ *	represents the static state the screen is in.
+ *
+ *	Returns negative errno on error, or zero on success.
+ */
+static int sidsafb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	unsigned long new_fb_size;
+
+	pr_debug("sidsafb_check_var:\n");
+	pr_debug("  resolution: %ux%u\n", var->xres, var->yres);
+	pr_debug("  pixclk:     %llu Hz\n", 1000000000000ULL / var->pixclock);
+	pr_debug("  bpp:        %u\n", var->bits_per_pixel);
+
+	new_fb_size = (var->xres_virtual * var->yres_virtual
+		       * ((var->bits_per_pixel + 7) / 8));
+	if (new_fb_size > info->fix.smem_len) {
+		printk(KERN_NOTICE
+		       "sidsafb: %uB framebuffer too small for %ux%ux%u\n",
+		       info->fix.smem_len, var->xres_virtual,
+		       var->yres_virtual, var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/* Force same alignment for each line */
+	var->xres = (var->xres + 3) & ~3UL;
+	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
+
+	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
+	var->transp.offset = var->transp.length = 0;
+
+	switch (var->bits_per_pixel) {
+	case 2:
+	case 4:
+	case 8:
+		var->red.offset = var->green.offset = var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length
+			= var->bits_per_pixel;
+		break;
+	case 15:
+	case 16:
+		/*
+		 * Bit 16 is the "intensity" bit, I think. Not sure
+		 * what we're going to use that for...
+		 */
+		var->red.offset = 0;
+		var->green.offset = 5;
+		var->blue.offset = 10;
+		var->red.length = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		/* fall through */
+	case 24:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	default:
+		printk(KERN_NOTICE "sidsafb: color depth %d not supported\n",
+		       var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	var->xoffset = var->yoffset = 0;
+	var->red.msb_right = var->green.msb_right = var->blue.msb_right =
+		var->transp.msb_right = 0;
+
+	return 0;
+}
+
+/**
+ *      sidsafb_set_par - Alters the hardware state.
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Using the fb_var_screeninfo in fb_info we set the resolution
+ *	of the this particular framebuffer. This function alters the
+ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
+ *	not alter var in fb_info since we are using that data. This
+ *	means we depend on the data in var inside fb_info to be
+ *	supported by the hardware.  sidsafb_check_var is always called
+ *	before sidsafb_set_par to ensure this.  Again if you can't
+ *	change the resolution you don't need this function.
+ *
+ */
+static int sidsafb_set_par(struct fb_info *info)
+{
+	struct sidsafb_info *sinfo = info->par;
+	unsigned long value;
+
+	pr_debug("sidsafb_set_par:\n");
+	pr_debug("  * resolution: %ux%u (%ux%u virtual)\n",
+		 info->var.xres, info->var.yres,
+		 info->var.xres_virtual, info->var.yres_virtual);
+
+	/* Turn off the LCD controller and the DMA controller */
+	pr_debug("writing 0x%08x to %p\n",
+		 LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time),
+		 sinfo->regs + LCDC_PWRCON);
+	lcdc_writel(sinfo, PWRCON,
+		    LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time));
+	pr_debug("writing 0 to %p\n", sinfo->regs + LCDC_DMACON);
+	lcdc_writel(sinfo, DMACON, 0);
+
+	info->fix.line_length = (info->var.xres_virtual
+				 * (info->var.bits_per_pixel / 8));
+
+	if (info->var.bits_per_pixel <= 8)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	/* Re-initialize the DMA engine... */
+	pr_debug("  * update DMA engine\n");
+	sidsafb_update_dma(info, &info->var);
+
+	/* ...set frame size and burst length = 8 words (?) */
+	value = LCDC_MKBF(DMAFRMCFG_FRMSIZE,
+			  (info->var.yres * info->fix.line_length + 3) / 4);
+	value |= LCDC_MKBF(DMAFRMCFG_BRSTLEN, (SIDSAFB_DMA_BURST_LEN - 1));
+	lcdc_writel(sinfo, DMAFRMCFG, value);
+
+	/* ...set 2D configuration (necessary for xres_virtual != xres) */
+	value = LCDC_MKBF(DMA2DCFG_ADDRINC,
+			  info->var.xres_virtual - info->var.xres);
+	lcdc_writel(sinfo, DMA2DCFG, value);
+
+	/* ...wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, DMACON) & LCDC_BIT(DMACON_DMABUSY))
+		msleep(10);
+
+	pr_debug("  * re-enable DMA engine\n");
+	/* ...and enable it with updated configuration */
+	lcdc_writel(sinfo, DMACON, (LCDC_BIT(DMACON_DMAEN)
+				    | LCDC_BIT(DMACON_DMAUPDT)
+				    | LCDC_BIT(DMACON_DMA2DEN)));
+
+	/* Now, the LCD core... */
+
+	/* Set pixel clock. */
+	value = (clk_get_rate(sinfo->pixclk) / 100000) * info->var.pixclock;
+	value /= 10000000;
+	value = (value + 1) / 2;
+	if (value == 0) {
+		printk("sidsafb: Bypassing lcdc_pclk divider\n");
+		lcdc_writel(sinfo, LCDCON1, LCDC_BIT(LCDCON1_BYPASS));
+	} else {
+		lcdc_writel(sinfo, LCDCON1, LCDC_MKBF(LCDCON1_CLKVAL, value - 1));
+	}
+
+	/* Initialize control register 2 */
+	value = (LCDC_BIT(LCDCON2_CLKMOD)
+		 | LCDC_MKBF(LCDCON2_DISTYPE, LCDC_DISTYPE_TFT));
+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+		value |= LCDC_BIT(LCDCON2_INVLINE);
+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+		value |= LCDC_BIT(LCDCON2_INVFRAME);
+	if (info->var.sync & FB_SYNC_PCLK_RISING)
+		value |= LCDC_BIT(LCDCON2_INVCLK);
+
+	switch (info->var.bits_per_pixel) {
+	case 1:	value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 0); break;
+	case 2: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 1); break;
+	case 4: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 2); break;
+	case 8: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 3); break;
+	case 15: /* fall through */
+	case 16: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 4); break;
+	case 24: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 5); break;
+	case 32: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 6); break;
+	default: BUG(); break;
+	}
+	pr_debug("  * LCDCON2 = %08lx\n", value);
+	lcdc_writel(sinfo, LCDCON2, value);
+
+	/* Vertical timing */
+	value = LCDC_MKBF(LCDTIM1_VPW, info->var.vsync_len - 1);
+	value |= LCDC_MKBF(LCDTIM1_VBP, info->var.upper_margin);
+	value |= LCDC_MKBF(LCDTIM1_VFP, info->var.lower_margin);
+	pr_debug("  * LCDTIM1 = %08lx\n", value);
+	lcdc_writel(sinfo, LCDTIM1, value);
+
+	/* Horizontal timing */
+	value = LCDC_MKBF(LCDTIM2_HFP, info->var.right_margin - 1);
+	value |= LCDC_MKBF(LCDTIM2_HPW, info->var.hsync_len - 1);
+	value |= LCDC_MKBF(LCDTIM2_HBP, info->var.left_margin - 1);
+	pr_debug("  * LCDTIM2 = %08lx\n", value);
+	lcdc_writel(sinfo, LCDTIM2, value);
+
+	/* Display size */
+	value = LCDC_MKBF(LCDFRMCFG_LINESIZE, info->var.xres - 1);
+	value |= LCDC_MKBF(LCDFRMCFG_LINEVAL, info->var.yres - 1);
+	lcdc_writel(sinfo, LCDFRMCFG, value);
+
+	/* FIFO Threshold: Use formula from data sheet */
+	value = SIDSAFB_FIFO_SIZE - (2 * SIDSAFB_DMA_BURST_LEN + 3);
+	lcdc_writel(sinfo, LCDFIFO, value);
+
+	/* Toggle LCD_MODE every frame */
+	lcdc_writel(sinfo, LCDMVAL, 0);
+
+	/* Disable all interrupts */
+	lcdc_writel(sinfo, LCD_IDR, ~0UL);
+
+	/* Wait for the LCDC core to become idle and enable it */
+	while(lcdc_readl(sinfo, PWRCON) & LCDC_BIT(PWRCON_LCD_BUSY))
+		msleep(10);
+
+	pr_debug("  * re-enable LCD core\n");
+	lcdc_writel(sinfo, PWRCON,
+		    LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time)
+		    | LCDC_BIT(PWRCON_LCD_PWR));
+
+	pr_debug("  * DONE\n");
+	return 0;
+}
+
+static inline u_int chan_to_field(u_int chan, const struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+/**
+ *  	sidsafb_setcolreg - Optional function. Sets a color register.
+ *      @regno: Which register in the CLUT we are programming
+ *      @red: The red value which can be up to 16 bits wide
+ *	@green: The green value which can be up to 16 bits wide
+ *	@blue:  The blue value which can be up to 16 bits wide.
+ *	@transp: If supported the alpha value which can be up to 16 bits wide.
+ *      @info: frame buffer info structure
+ *
+ *  	Set a single color register. The values supplied have a 16 bit
+ *  	magnitude which needs to be scaled in this function for the hardware.
+ *	Things to take into consideration are how many color registers, if
+ *	any, are supported with the current color visual. With truecolor mode
+ *	no color palettes are supported. Here a psuedo palette is created
+ *	which we store the value in pseudo_palette in struct fb_info. For
+ *	pseudocolor mode we have a limited color palette. To deal with this
+ *	we can program what color is displayed for a particular pixel value.
+ *	DirectColor is similar in that we can program each color field. If
+ *	we have a static colormap we don't need to implement this function.
+ *
+ *	Returns negative errno on error, or zero on success. In an
+ *	ideal world, this would have been the case, but as it turns
+ *	out, the other drivers return 1 on failure, so that's what
+ *	we're going to do.
+ */
+static int sidsafb_setcolreg(unsigned int regno, unsigned int red,
+			     unsigned int green, unsigned int blue,
+			     unsigned int transp, struct fb_info *info)
+{
+	struct sidsafb_info *sinfo = info->par;
+	unsigned int val;
+	u32 *pal;
+	int ret = 1;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green
+				      + 7471 * blue) >> 16;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno < 256) {
+			val  = ((red   >> 11) & 0x001f);
+			val |= ((green >>  6) & 0x03e0);
+			val |= ((blue  >>  1) & 0x7c00);
+
+			/*
+			 * TODO: intensity bit. Maybe something like
+			 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
+			 */
+
+			lcdc_writel(sinfo, LUT + regno * 4, val);
+			ret = 0;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static int sidsafb_pan_display(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	struct sidsafb_info *sinfo = info->par;
+
+	pr_debug("sidsafb_pan_display\n");
+
+	sidsafb_update_dma(info, var);
+
+	if (sinfo->wait_for_vsync) {
+		spin_lock_irq(&sinfo->lock);
+		lcdc_writel(sinfo, LCD_ICR, LCDC_BIT(LCD_ICR_EOFIC));
+		lcdc_writel(sinfo, LCD_IER, LCDC_BIT(LCD_IER_EOFIE));
+		init_completion(&sinfo->vsync_complete);
+		lcdc_readl(sinfo, LCD_IMR);
+		spin_unlock_irq(&sinfo->lock);
+
+		wait_for_completion(&sinfo->vsync_complete);
+
+		lcdc_writel(sinfo, LCD_IDR, LCDC_BIT(LCD_IDR_EOFID));
+	}
+
+	return 0;
+}
+
+static struct fb_ops sidsafb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= sidsafb_check_var,
+	.fb_set_par	= sidsafb_set_par,
+	.fb_setcolreg	= sidsafb_setcolreg,
+	.fb_pan_display	= sidsafb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static irqreturn_t sidsafb_interrupt(int irq, void *dev_id)
+{
+	struct fb_info *info = dev_id;
+	struct sidsafb_info *sinfo = info->par;
+	u32 status;
+
+	status = lcdc_readl(sinfo, LCD_ISR);
+	while (status) {
+		if (status & LCDC_BIT(LCD_ISR_EOFIS)) {
+			pr_debug("sidsafb: DMA End Of Frame interrupt\n");
+
+			lcdc_writel(sinfo, LCD_ICR, LCDC_BIT(LCD_ICR_EOFIC));
+			status &= ~LCDC_BIT(LCD_ISR_EOFIS);
+			complete(&sinfo->vsync_complete);
+		}
+
+		if (status) {
+			printk(KERN_ERR
+			       "LCDC: Interrupts still pending: 0x%x\n",
+			       status);
+			lcdc_writel(sinfo, LCD_IDR, status);
+		}
+
+		status = lcdc_readl(sinfo, LCD_ISR);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void __devinit init_pseudo_palette(u32 *palette)
+{
+	static const u32 init_palette[16] = {
+		0x000000,
+		0xaa0000,
+		0x00aa00,
+		0xaa5500,
+		0x0000aa,
+		0xaa00aa,
+		0x00aaaa,
+		0xaaaaaa,
+		0x555555,
+		0xff5555,
+		0x55ff55,
+		0xffff55,
+		0x5555ff,
+		0xff55ff,
+		0x55ffff,
+		0xffffff
+	};
+
+	memcpy(palette, init_palette, sizeof(init_palette));
+}
+
+static int __devinit sidsafb_set_fbinfo(struct sidsafb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+
+	init_pseudo_palette(sinfo->pseudo_palette);
+
+	info->flags		= (FBINFO_DEFAULT
+				   | FBINFO_PARTIAL_PAN_OK
+				   | FBINFO_HWACCEL_XPAN
+				   | FBINFO_HWACCEL_YPAN);
+	memcpy(&info->fix, &sidsafb_fix, sizeof(info->fix));
+	memcpy(&info->monspecs, &default_monspecs, sizeof(info->monspecs));
+	info->fbops		= &sidsafb_ops;
+	info->pseudo_palette	= sinfo->pseudo_palette;
+
+	return 0;
+}
+
+static int __devinit sidsafb_probe(struct platform_device *pdev)
+{
+	struct lcdc_platform_data *fb_data = pdev->dev.platform_data;
+	struct fb_info *info;
+	struct sidsafb_info *sinfo;
+	const struct resource *mmio_resource;
+	int ret;
+
+	pr_debug("sidsafb_probe BEGIN\n");
+
+	mmio_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mmio_resource) {
+		dev_err(&pdev->dev, "no MMIO resource found\n");
+		return -ENXIO;
+	}
+
+	ret = -ENOMEM;
+	info = framebuffer_alloc(sizeof(struct sidsafb_info), &pdev->dev);
+	if (!info) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		goto out;
+	}
+
+	sinfo = info->par;
+	sinfo->info = info;
+	sinfo->pdev = pdev;
+	sinfo->guard_time = 1;
+
+	spin_lock_init(&sinfo->lock);
+	sidsafb_set_fbinfo(sinfo);
+	info->fix.mmio_start = mmio_resource->start;
+	info->fix.mmio_len = mmio_resource->end - mmio_resource->start + 1;
+	sinfo->irq_base = platform_get_irq(pdev, 0);
+
+	sinfo->hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(sinfo->hclk)) {
+		dev_err(&pdev->dev, "failed to get hclk\n");
+		ret = PTR_ERR(sinfo->hclk);
+		goto free_info;
+	}
+	sinfo->pixclk = clk_get(&pdev->dev, "pixclk");
+	if (IS_ERR(sinfo->pixclk)) {
+		dev_err(&pdev->dev, "failed to get pixel clock\n");
+		ret = PTR_ERR(sinfo->hclk);
+		goto put_hclk;
+	}
+
+	clk_enable(sinfo->hclk);
+	clk_enable(sinfo->pixclk);
+
+	/* Use platform-supplied framebuffer memory if available */
+	if (fb_data && fb_data->fbmem_size != 0) {
+		info->fix.smem_start = fb_data->fbmem_start;
+		info->fix.smem_len = fb_data->fbmem_size;
+		info->screen_base = ioremap(info->fix.smem_start,
+					    info->fix.smem_len);
+	} else {
+		dma_addr_t paddr;
+
+		info->fix.smem_len = fb_size;
+		info->screen_base = dma_alloc_coherent(&pdev->dev, fb_size,
+						       &paddr, GFP_KERNEL);
+		info->fix.smem_start = paddr;
+	}
+
+	if (!info->screen_base) {
+		printk(KERN_ERR "sidsafb: Could not allocate framebuffer\n");
+		goto disable_clocks;
+	}
+
+	sinfo->regs = ioremap(info->fix.mmio_start, info->fix.mmio_len);
+	if (!sinfo->regs) {
+		printk(KERN_ERR "sidsafb: Could not map LCDC registers\n");
+		goto free_fb;
+	}
+
+	ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
+			   info->monspecs.modedb_len, info->monspecs.modedb,
+			   CONFIG_FB_SIDSA_DEFAULT_BPP);
+	if (!ret) {
+		printk(KERN_ERR "sidsafb: No suitable video mode found\n");
+		goto unmap_regs;
+	}
+
+	ret = request_irq(sinfo->irq_base, sidsafb_interrupt, 0,
+			  "sidsafb", info);
+	if (ret)
+		goto unmap_regs;
+
+	/* Allocate colormap */
+	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+		ret = -ENOMEM;
+		goto unregister_irqs;
+	}
+
+	platform_set_drvdata(pdev, info);
+	ret = device_create_file(&pdev->dev, &dev_attr_vsync_pan);
+	if (ret)
+		goto free_cmap;
+
+	/*
+	 * Tell the world that we're ready to go
+	 */
+	ret = register_framebuffer(info);
+	if (ret)
+		goto remove_attrs;
+
+	printk("fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
+	       info->node, info->fix.mmio_start, sinfo->regs, sinfo->irq_base);
+
+	memset_io(info->screen_base, 0, info->fix.smem_len);
+	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+	ret = fb_set_var(info, &info->var);
+	if (ret)
+		printk(KERN_WARNING
+		       "sidsafb: Unable to set display parameters\n");
+	info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
+
+	pr_debug("sidsafb_probe SUCCESS\n");
+	return 0;
+
+
+remove_attrs:
+	device_remove_file(&pdev->dev, &dev_attr_vsync_pan);
+free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+unregister_irqs:
+	free_irq(sinfo->irq_base, info);
+unmap_regs:
+	iounmap(sinfo->regs);
+free_fb:
+	if (!fb_data || fb_data->fbmem_size == 0)
+		dma_free_coherent(&pdev->dev, info->fix.smem_len,
+				  (void __force *)info->screen_base,
+				  info->fix.smem_start);
+disable_clocks:
+	clk_disable(sinfo->pixclk);
+	clk_disable(sinfo->hclk);
+	clk_put(sinfo->pixclk);
+put_hclk:
+	clk_put(sinfo->hclk);
+free_info:
+	framebuffer_release(info);
+out:
+	pr_debug("sidsafb_probe FAILED\n");
+	return ret;
+}
+
+static int __devexit sidsafb_remove(struct platform_device *pdev)
+{
+	struct lcdc_platform_data *fb_data = pdev->dev.platform_data;
+	struct fb_info *info = platform_get_drvdata(pdev);
+	struct sidsafb_info *sinfo;
+
+	if (!info)
+		return 0;
+	sinfo = info->par;
+
+	/* TODO: Restore original state */
+	unregister_framebuffer(info);
+
+	device_remove_file(&pdev->dev, &dev_attr_vsync_pan);
+
+	fb_dealloc_cmap(&info->cmap);
+	free_irq(sinfo->irq_base, info);
+	iounmap(sinfo->regs);
+	if (!fb_data || fb_data->fbmem_size == 0)
+		dma_free_coherent(&pdev->dev, info->fix.smem_len,
+				  (void __force *)info->screen_base,
+				  info->fix.smem_start);
+	clk_disable(sinfo->hclk);
+	clk_put(sinfo->hclk);
+	platform_set_drvdata(pdev, NULL);
+	framebuffer_release(info);
+
+	return 0;
+}
+
+static struct platform_driver sidsafb_driver = {
+	.probe		= sidsafb_probe,
+	.remove		= __devexit_p(sidsafb_remove),
+	.driver		= {
+		.name		= "lcdc",
+	},
+};
+
+int __init sidsafb_init(void)
+{
+	return platform_driver_register(&sidsafb_driver);
+}
+
+static void __exit sidsafb_exit(void)
+{
+	platform_driver_unregister(&sidsafb_driver);
+}
+
+module_init(sidsafb_init);
+module_exit(sidsafb_exit);
+
+module_param(fb_size, ulong, 0644);
+MODULE_PARM_DESC(fb_size, "Minimum framebuffer size to allocate");
+
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_DESCRIPTION("Atmel/SIDSA LCD Controller framebuffer driver");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_dbgu.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_dbgu.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_dbgu.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_dbgu.h	2007-03-24 16:39:15.000000000 +0100
@@ -35,6 +35,20 @@
 #define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
 #define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
 #define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
+#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
+#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
+#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
+#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
+#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
+#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
+#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
+#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
+#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
+#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
+#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
+#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
+#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
 #define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
 #define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
 #define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_mci.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_mci.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_mci.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_mci.h	2007-03-24 16:39:15.000000000 +0100
@@ -26,6 +26,9 @@
 #define AT91_MCI_MR		0x04		/* Mode Register */
 #define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
 #define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
 #define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
 #define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
 #define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_pdc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_pdc.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_pdc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_pdc.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_rstc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_rstc.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_rstc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_rstc.h	2007-03-24 16:39:16.000000000 +0100
@@ -17,7 +17,7 @@
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
 
 #define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
@@ -34,6 +34,5 @@
 #define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
 #define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
 #define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
 
 #endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260.h	2007-03-24 16:39:16.000000000 +0100
@@ -113,6 +113,10 @@
 
 #define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
 
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+
 #if 0
 /*
  * PIO pin definitions (peripheral A/B multiplexing).
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h	2007-03-24 16:39:16.000000000 +0100
@@ -18,7 +18,7 @@
 #define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
 #define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
 #define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
 #define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263.h	2007-03-24 16:39:16.000000000 +0100
@@ -0,0 +1,131 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h	2007-03-24 16:39:16.000000000 +0100
@@ -0,0 +1,129 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h	2007-03-24 16:39:16.000000000 +0100
@@ -131,4 +131,11 @@
 #define			AT91_SMC_PS_16			(2 << 28)
 #define			AT91_SMC_PS_32			(3 << 28)
 
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
 #endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/board.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/board.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/board.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/board.h	2007-03-24 16:39:16.000000000 +0100
@@ -34,6 +34,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/device.h>
 #include <linux/spi/spi.h>
+#include <video/atmel_lcdc.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -60,18 +61,23 @@
 	u8		wp_pin;		/* (SD) writeprotect detect */
 	u8		vcc_pin;	/* power switching (high == on) */
 };
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
- /* Ethernet */
+/* Ethernet (EMAC & MACB) */
 struct at91_eth_data {
 	u8		phy_irq_pin;	/* PHY IRQ */
 	u8		is_rmii;	/* using RMII interface? */
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data	at91_eth_data
+#endif
+
  /* USB Host */
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power switch */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
@@ -93,6 +99,9 @@
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
 
+ /* LCD Controler */
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
  /* Serial */
 struct at91_uart_config {
 	unsigned short	console_tty;	/* tty number of serial console */
@@ -114,4 +123,13 @@
 extern u8 at91_leds_timer;
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 
+struct at91_gpio_led {
+	u8		index;		/* index of LED */
+	char*		name;		/* name of LED */
+	u8		gpio;		/* AT91_PIN_xx */
+	u8		flags;		/* 1=active-high */
+	char*		trigger;	/* default trigger */
+};
+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
+
 #endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/cpu.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/cpu.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/cpu.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/cpu.h	2007-03-24 16:39:16.000000000 +0100
@@ -20,7 +20,11 @@
 #define ARCH_ID_AT91RM9200	0x09290780
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
 
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
 
 static inline unsigned long at91_cpu_identify(void)
 {
@@ -28,6 +32,16 @@
 }
 
 
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
 #ifdef CONFIG_ARCH_AT91RM9200
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
 #else
@@ -35,8 +49,10 @@
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
 #else
+#define cpu_is_at91sam9xe()	(0)
 #define cpu_is_at91sam9260()	(0)
 #endif
 
@@ -46,4 +62,10 @@
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
 #endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/debug-macro.S linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/debug-macro.S
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/debug-macro.S	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/debug-macro.S	2007-03-24 16:39:16.000000000 +0100
@@ -16,24 +16,24 @@
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
-	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
 	.endm
 
 	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
 	beq	1001b
 	.endm
 
 	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
 	beq	1001b
 	.endm
 
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/entry-macro.S linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/entry-macro.S
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/entry-macro.S	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/entry-macro.S	2007-03-24 16:39:16.000000000 +0100
@@ -17,10 +17,10 @@
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
 	.endm
 
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/gpio.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/gpio.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/gpio.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/gpio.h	2007-03-24 16:39:16.000000000 +0100
@@ -17,7 +17,7 @@
 
 #define PIN_BASE		NR_AIC_IRQS
 
-#define MAX_GPIO_BANKS		4
+#define MAX_GPIO_BANKS		5
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
@@ -26,37 +26,31 @@
 #define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
 #define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
 #define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-
 #define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
 #define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
 #define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
 #define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
 #define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-
 #define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
 #define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
 #define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
 #define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
 #define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-
 #define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
 #define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
 #define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
 #define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
 #define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-
 #define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
 #define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
 #define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
 #define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
 #define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-
 #define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
 #define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
 #define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
 #define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
 #define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-
 #define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
 #define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
 
@@ -65,37 +59,31 @@
 #define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
 #define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
 #define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-
 #define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
 #define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
 #define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
 #define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
 #define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-
 #define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
 #define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
 #define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
 #define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
 #define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-
 #define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
 #define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
 #define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
 #define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
 #define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-
 #define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
 #define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
 #define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
 #define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
 #define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-
 #define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
 #define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
 #define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
 #define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
 #define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-
 #define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
 #define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
 
@@ -104,37 +92,31 @@
 #define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
 #define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
 #define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-
 #define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
 #define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
 #define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
 #define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
 #define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-
 #define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
 #define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
 #define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
 #define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
 #define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-
 #define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
 #define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
 #define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
 #define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
 #define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-
 #define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
 #define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
 #define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
 #define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
 #define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-
 #define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
 #define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
 #define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
 #define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
 #define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-
 #define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
 #define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
 
@@ -143,40 +125,67 @@
 #define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
 #define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
 #define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-
 #define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
 #define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
 #define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
 #define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
 #define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-
 #define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
 #define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
 #define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
 #define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
 #define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-
 #define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
 #define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
 #define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
 #define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
 #define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-
 #define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
 #define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
 #define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
 #define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
 #define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-
 #define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
 #define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
 #define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
 #define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
 #define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-
 #define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
 #define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
 
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
 #ifndef __ASSEMBLY__
 /* setup setup routines, called from board init or driver probe() */
 extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/hardware.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/hardware.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/hardware.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/hardware.h	2007-03-24 16:39:16.000000000 +0100
@@ -22,21 +22,23 @@
 #include <asm/arch/at91sam9260.h>
 #elif defined(CONFIG_ARCH_AT91SAM9261)
 #include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
 
 
 /*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (544Kb)
  */
-#define AT91_IO_PHYS_BASE	0xFFFA0000
+#define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 #define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
 
  /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
 
 /*
  * Virtual to Physical Address mapping for IO devices.
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/ics1523.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/ics1523.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/ics1523.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/ics1523.h	2007-03-24 16:39:16.000000000 +0100
@@ -0,0 +1,154 @@
+//*----------------------------------------------------------------------------
+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*----------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*----------------------------------------------------------------------------
+//* File Name           : ics1523.h
+//* Object              : Clock Generator Prototyping File.
+//*
+//* 1.0 08/28/02 ED     : Creation
+//* 1.2 13/01/03 FB		: Update on lib V3
+//*----------------------------------------------------------------------------
+
+#ifndef ics1523_h
+#define ics1523_h
+
+/*-------------------------------------------*/
+/* ICS1523 TWI Serial Clock Definition       */
+/*-------------------------------------------*/
+
+#define		ICS_MIN_CLOCK		100		/* Min Frequency Access Clock KHz */
+#define		ICS_MAX_CLOCK		400		/* Max Frequency Access Clock KHz */
+#define		ICS_TRANSFER_RATE	ICS_MAX_CLOCK	/* Transfer speed to apply */
+
+#define		ICS_WRITE_CLK_PNB	30		/* TWCK Clock Periods required to write */
+#define		ICS_READ_CLK_PNB	40		/* TWCK Clock Periods required to read */
+
+/*-------------------------------------------*/
+/* ICS1523 Write Operation Definition        */
+/*-------------------------------------------*/
+
+#define		ICS1523_ACCESS_OK	0		/* OK */
+#define		ICS1523_ACCESS_ERROR	-1		/* NOK */
+
+/*-------------------------------------------*/
+/* ICS1523 Device Addresses Definition       */
+/*-------------------------------------------*/
+
+#define		ICS_ADDR		0x26		/* Device Address */
+
+/*--------------------------------------------------*/
+/* ICS1523 Registers Internal Addresses Definition  */
+/*--------------------------------------------------*/
+
+#define		ICS_ICR			0x0		/* Input Control Register */
+#define		ICS_LCR			0x1		/* Loop Control Register */
+#define		ICS_FD0			0x2		/* PLL FeedBack Divider LSBs */
+#define		ICS_FD1			0x3		/* PLL FeedBack Divider MSBs */
+#define		ICS_DPAO		0x4		/* Dynamic Phase Aligner Offset */
+#define		ICS_DPAC		0x5		/* Dynamic Phase Aligner Resolution */
+#define		ICS_OE			0x6		/* Output Enables Register */
+#define		ICS_OD			0x7		/* Osc Divider Register */
+#define		ICS_SWRST		0x8		/* DPA & PLL Reset Register */
+#define		ICS_VID			0x10		/* Chip Version Register */
+#define		ICS_RID			0x11		/* Chip Revision Register */
+#define		ICS_SR			0x12		/* Status Register */
+
+/*------------------------------------------------------*/
+/* ICS1523 Input Control Register Bits Definition       */
+/*------------------------------------------------------*/
+
+#define		ICS_PDEN		0x1		/* Phase Detector Enable */
+#define		ICS_PDPOL		0x2		/* Phase Detector Enable Polarity */
+#define		ICS_REFPOL		0x4		/* External Reference Polarity */
+#define		ICS_FBKPOL		0x8		/* External Feedback Polarity */
+#define		ICS_FBKSEL		0x10		/* External Feedback Select */
+#define		ICS_FUNCSEL		0x20		/* Function Out Select */
+#define		ICS_ENPLS		0x40		/* Enable PLL Lock/Ref Status Output */
+#define		ICS_ENDLS		0x80		/* Enable DPA Lock/Ref Status Output */
+
+/*-----------------------------------------------------*/
+/* ICS1523 Loop Control Register Bits Definition       */
+/*-----------------------------------------------------*/
+
+#define		ICS_PFD			0x7		/* Phase Detector Gain */
+#define		ICS_PSD			0x30		/* Post-Scaler Divider */
+
+/*----------------------------------------------------*/
+/* ICS1523 PLL FeedBack Divider LSBs Definition       */
+/*----------------------------------------------------*/
+
+#define		ICS_FBDL		0xFF		/* PLL FeedBack Divider LSBs */
+
+/*----------------------------------------------------*/
+/* ICS1523 PLL FeedBack Divider MSBs Definition       */
+/*----------------------------------------------------*/
+
+#define		ICS_FBDM		0xF		/* PLL FeedBack Divider MSBs */
+
+/*------------------------------------------------------------*/
+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition       */
+/*------------------------------------------------------------*/
+
+#define		ICS_DPAOS		0x2F		/* Dynamic Phase Aligner Offset */
+#define		ICS_FILSEL		0x80		/* Loop Filter Select */
+
+/*----------------------------------------------------------------*/
+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition       */
+/*----------------------------------------------------------------*/
+
+#define		ICS_DPARES		0x3		/* Dynamic Phase Aligner Resolution */
+#define		ICS_MMREV		0xFC		/* Metal Mask Revision Number */
+
+/*-------------------------------------------------------*/
+/* ICS1523 Output Enables Register Bits Definition       */
+/*-------------------------------------------------------*/
+
+#define		ICS_OEPCK		0x1		/* Output Enable for PECL PCLK Outputs */
+#define		ICS_OETCK		0x2		/* Output Enable for STTL CLK Output */
+#define		ICS_OEP2		0x4		/* Output Enable for PECL CLK/2 Outputs */
+#define		ICS_OET2		0x8		/* Output Enable for STTL CLK/2 Output */
+#define		ICS_OEF			0x10		/* Output Enable for STTL FUNC Output */
+#define		ICS_CLK2INV		0x20		/* CLK/2 Invert */
+#define		ICS_OSCL		0xC0		/* SSTL Clock Scaler */
+
+/*----------------------------------------------------*/
+/* ICS1523 Osc Divider Register Bits Definition       */
+/*----------------------------------------------------*/
+
+#define		ICS_OSCDIV		0x7F		/* Oscillator Divider Modulus */
+#define		ICS_INSEL		0x80		/* Input Select */
+
+/*---------------------------------------------------*/
+/* ICS1523 DPA & PLL Reset Register Definition       */
+/*---------------------------------------------------*/
+
+#define		ICS_DPAR		0x0A		/* DPA Reset Command */
+#define		ICS_PLLR		0x50		/* PLL Reset Command */
+
+/*------------------------------------------------*/
+/* ICS1523 Chip Version Register Definition       */
+/*------------------------------------------------*/
+
+#define		ICS_CHIPV		0xFF		/* Chip Version */
+
+/*-------------------------------------------------*/
+/* ICS1523 Chip Revision Register Definition       */
+/*-------------------------------------------------*/
+
+#define		ICS_CHIPR		0xFF		/* Chip Revision */
+
+/*------------------------------------------*/
+/* ICS1523 Status Register Definition       */
+/*------------------------------------------*/
+
+#define		ICS_DPALOCK		0x1		/* DPA Lock Status */
+#define		ICS_PLLLOCK		0x2		/* PLL Lock Status */
+
+int at91_ics1523_init(void);
+
+#endif /* ics1523_h */
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/irqs.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/irqs.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/irqs.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/irqs.h	2007-03-24 16:39:16.000000000 +0100
@@ -37,8 +37,8 @@
  * IRQ interrupt symbols are the AT91xxx_ID_* symbols
  * for IRQs handled directly through the AIC, or else the AT91_PIN_*
  * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
+ * We make provision for 5 banks of GPIO.
  */
-#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
 
 #endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/spi.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/spi.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/spi.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/spi.h	2007-03-24 16:39:16.000000000 +0100
@@ -0,0 +1,54 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
+ *
+ * (c) SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef AT91_LEGACY_SPI_H
+#define AT91_LEGACY_SPI_H
+
+#define SPI_MAJOR		153	/* registered device number */
+
+#define DEFAULT_SPI_CLK		6000000
+
+
+/* Maximum number of buffers in a single SPI transfer.
+ *  DataFlash uses maximum of 2
+ *  spidev interface supports up to 8.
+ */
+#define MAX_SPI_TRANSFERS	8
+#define NR_SPI_DEVICES		4	/* number of devices on SPI bus */
+
+/*
+ * Describes the buffers for a SPI transfer.
+ * A transmit & receive buffer must be specified for each transfer
+ */
+struct spi_transfer_list {
+	void* tx[MAX_SPI_TRANSFERS];	/* transmit */
+	int txlen[MAX_SPI_TRANSFERS];
+	void* rx[MAX_SPI_TRANSFERS];	/* receive */
+	int rxlen[MAX_SPI_TRANSFERS];
+	int nr_transfers;		/* number of transfers */
+	int curr;			/* current transfer */
+};
+
+struct spi_local {
+	unsigned int pcs;		/* Peripheral Chip Select value */
+
+	struct spi_transfer_list *xfers;	/* current transfer list */
+	dma_addr_t tx, rx;		/* DMA address for current transfer */
+	dma_addr_t txnext, rxnext;	/* DMA address for next transfer */
+};
+
+
+/* Exported functions */
+extern void spi_access_bus(short device);
+extern void spi_release_bus(short device);
+extern int spi_transfer(struct spi_transfer_list* list);
+
+#endif
diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/timex.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/timex.h
--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/timex.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/timex.h	2007-03-24 16:39:16.000000000 +0100
@@ -32,6 +32,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#define AT91SAM9_MASTER_CLOCK	99959500
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #endif
 
 #endif
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at32ap7000.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at32ap7000.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at32ap7000.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at32ap7000.h	2007-03-24 16:42:28.000000000 +0100
@@ -24,10 +24,12 @@
 #define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
 #define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
 #define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
 
 #define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
 #define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
 #define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
 #define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
 
 #endif /* __ASM_ARCH_AT32AP7000_H__ */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at91_pdc.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at91_pdc.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at91_pdc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at91_pdc.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/board.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/board.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/board.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/board.h	2007-03-24 16:42:29.000000000 +0100
@@ -6,6 +6,8 @@
 
 #include <linux/types.h>
 
+#define GPIO_PIN_NONE	(-1)
+
 /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
 void at32_add_system_devices(void);
 
@@ -26,7 +28,19 @@
 struct platform_device *
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
 
-struct platform_device *at32_add_device_spi(unsigned int id);
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
+struct platform_device *at32_add_device_twi(unsigned int id);
+
+struct mci_platform_data {
+	int detect_pin;
+	int wp_pin;
+};
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+struct platform_device *at32_add_device_usba(unsigned int id);
 
 struct lcdc_platform_data {
 	unsigned long fbmem_start;
@@ -35,4 +49,8 @@
 struct platform_device *
 at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
 
+struct platform_device *at32_add_device_ac97c(unsigned int id);
+struct platform_device *at32_add_device_abdac(unsigned int id);
+struct platform_device *at32_add_device_isi(unsigned int id);
+
 #endif /* __ASM_ARCH_BOARD_H */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/gpio.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/gpio.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/gpio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/gpio.h	2007-03-24 16:42:28.000000000 +0100
@@ -0,0 +1,27 @@
+#ifndef __ASM_AVR32_ARCH_GPIO_H
+#define __ASM_AVR32_ARCH_GPIO_H
+
+#include <linux/compiler.h>
+#include <asm/irq.h>
+
+
+/* Arch-neutral GPIO API */
+int __must_check gpio_request(unsigned int gpio, const char *label);
+void gpio_free(unsigned int gpio);
+
+int gpio_direction_input(unsigned int gpio);
+int gpio_direction_output(unsigned int gpio);
+int gpio_get_value(unsigned int gpio);
+void gpio_set_value(unsigned int gpio, int value);
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return gpio + GPIO_IRQ_BASE;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return irq - GPIO_IRQ_BASE;
+}
+
+#endif /* __ASM_AVR32_ARCH_GPIO_H */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/irq.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/irq.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/irq.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/irq.h	2007-03-24 16:42:28.000000000 +0100
@@ -0,0 +1,14 @@
+#ifndef __ASM_AVR32_ARCH_IRQ_H
+#define __ASM_AVR32_ARCH_IRQ_H
+
+#define EIM_IRQ_BASE	NR_INTERNAL_IRQS
+#define NR_EIM_IRQS	32
+
+#define AT32_EXTINT(n)	(EIM_IRQ_BASE + (n))
+
+#define GPIO_IRQ_BASE	(EIM_IRQ_BASE + NR_EIM_IRQS)
+#define NR_GPIO_IRQS	(5 * 32)
+
+#define NR_IRQS		(GPIO_IRQ_BASE + NR_GPIO_IRQS)
+
+#endif /* __ASM_AVR32_ARCH_IRQ_H */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/portmux.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/portmux.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/portmux.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/portmux.h	2007-03-24 16:42:28.000000000 +0100
@@ -15,12 +15,14 @@
  *
  * The following flags determine the initial state of the pin.
  */
-#define AT32_GPIOF_PULLUP	0x00000001	/* Enable pull-up */
-#define AT32_GPIOF_OUTPUT	0x00000002	/* Enable output driver */
-#define AT32_GPIOF_HIGH		0x00000004	/* Set output high */
+#define AT32_GPIOF_PULLUP	0x00000001	/* (not-OUT) Enable pull-up */
+#define AT32_GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
+#define AT32_GPIOF_HIGH		0x00000004	/* (OUT) Set output high */
+#define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
 
 void at32_select_periph(unsigned int pin, unsigned int periph,
 			unsigned long flags);
 void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_reserve_pin(unsigned int pin);
 
 #endif /* __ASM_ARCH_PORTMUX_H__ */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/smc.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/smc.h
--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/smc.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/smc.h	2007-03-24 16:42:29.000000000 +0100
@@ -48,10 +48,32 @@
 	unsigned int	nwe_controlled:1;
 
 	/*
+	 * 0: NWAIT is disabled
+	 * 1: Reserved
+	 * 2: NWAIT is frozen mode
+	 * 3: NWAIT in ready mode
+	 */
+	unsigned int	nwait_mode:2;
+
+	/*
 	 * 0: Byte select access type
 	 * 1: Byte write access type
 	 */
 	unsigned int	byte_write:1;
+
+	/*
+	 * Number of clock cycles before data is released after
+	 * the rising edge of the read controlling signal
+	 *
+	 * Total cycles from SMC is tdf_cycles + 1
+	 */
+	unsigned int	tdf_cycles:4;
+
+	/*
+	 * 0: TDF optimization disabled
+	 * 1: TDF optimization enabled
+	 */
+	unsigned int	tdf_mode:1;
 };
 
 extern int smc_set_configuration(int cs, const struct smc_config *config);
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/checksum.h linux-2.6.20.4-atmel/include/asm-avr32/checksum.h
--- linux-2.6.20.4-0rig/include/asm-avr32/checksum.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/checksum.h	2007-03-24 16:42:28.000000000 +0100
@@ -38,7 +38,7 @@
  *	passed in an incorrect kernel address to one of these functions.
  *
  *	If you use these functions directly please don't forget the
- *	verify_area().
+ *	access_ok().
  */
 static inline
 __wsum csum_partial_copy_nocheck(const void *src, void *dst,
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/dma-controller.h linux-2.6.20.4-atmel/include/asm-avr32/dma-controller.h
--- linux-2.6.20.4-0rig/include/asm-avr32/dma-controller.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/dma-controller.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
+#define __ASM_AVR32_DMA_CONTROLLER_H
+
+#include <linux/device.h>
+
+#define DMA_DIR_MEM_TO_MEM		0x0000
+#define DMA_DIR_MEM_TO_PERIPH		0x0001
+#define DMA_DIR_PERIPH_TO_MEM		0x0002
+#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
+
+#define DMA_WIDTH_8BIT			0
+#define DMA_WIDTH_16BIT			1
+#define DMA_WIDTH_32BIT			2
+
+struct dma_request {
+	struct dma_controller *dmac;
+	struct list_head list;
+
+	unsigned short channel;
+
+	void (*xfer_complete)(struct dma_request *req);
+	void (*block_complete)(struct dma_request *req);
+	void (*error)(struct dma_request *req);
+};
+
+struct dma_request_sg {
+	struct dma_request req;
+
+	int nr_sg;
+	struct scatterlist *sg;
+	unsigned long block_size;
+	unsigned int nr_blocks;
+
+	dma_addr_t data_reg;
+	unsigned short periph_id;
+
+	unsigned char direction;
+	unsigned char width;
+};
+#define to_dma_request_sg(_req)				\
+	container_of(_req, struct dma_request_sg, req)
+
+struct dma_request_cyclic {
+	struct dma_request req;
+
+        int periods;
+	unsigned long buffer_size;
+
+        dma_addr_t buffer_start;
+	dma_addr_t data_reg;
+
+	unsigned short periph_id;
+	unsigned char direction;
+	unsigned char width;
+
+        void *dev_id;
+};
+#define to_dma_request_cyclic(_req)				\
+	container_of(_req, struct dma_request_cyclic, req)
+
+struct dma_request_memcpy {
+	struct dma_request req;
+
+	dma_addr_t src_addr;
+	unsigned int src_width;
+	unsigned int src_stride;
+
+	dma_addr_t dst_addr;
+	unsigned int dst_width;
+	unsigned int dst_stride;
+
+	size_t length;
+
+	unsigned short src_reverse:1;
+	unsigned short dst_reverse:1;
+};
+#define to_dma_request_memcpy(_req)				\
+	container_of(_req, struct dma_request_memcpy, req)
+
+struct dma_controller {
+	struct list_head list;
+	int id;
+	struct device *dev;
+
+	int (*alloc_channel)(struct dma_controller *dmac);
+	void (*release_channel)(struct dma_controller *dmac,
+				int channel);
+	int (*prepare_request_sg)(struct dma_controller *dmac,
+				  struct dma_request_sg *req);
+        int (*prepare_request_cyclic)(struct dma_controller *dmac,
+				      struct dma_request_cyclic *req);
+	int (*prepare_request_memcpy)(struct dma_controller *dmac,
+				      struct dma_request_memcpy *req);
+	int (*start_request)(struct dma_controller *dmac,
+			     unsigned int channel);
+	int (*stop_request)(struct dma_controller *dmac,
+                            unsigned int channel);
+        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
+                                      unsigned int channel);
+};
+
+static inline int
+dma_alloc_channel(struct dma_controller *dmac)
+{
+	return dmac->alloc_channel(dmac);
+}
+
+static inline void
+dma_release_channel(struct dma_controller *dmac, int chan)
+{
+	dmac->release_channel(dmac, chan);
+}
+
+static inline int
+dma_prepare_request_sg(struct dma_controller *dmac,
+		       struct dma_request_sg *req)
+{
+	return dmac->prepare_request_sg(dmac, req);
+}
+
+static inline int
+dma_prepare_request_cyclic(struct dma_controller *dmac,
+			   struct dma_request_cyclic *req)
+{
+	return dmac->prepare_request_cyclic(dmac, req);
+}
+
+static inline int
+dma_prepare_request_memcpy(struct dma_controller *dmac,
+			   struct dma_request_memcpy *req)
+{
+	return dmac->prepare_request_memcpy(dmac, req);
+}
+
+static inline int
+dma_start_request(struct dma_controller *dmac,
+		  unsigned int channel)
+{
+	return dmac->start_request(dmac, channel);
+}
+
+static inline int
+dma_stop_request(struct dma_controller *dmac,
+                 unsigned int channel)
+{
+	return dmac->stop_request(dmac, channel);
+}
+
+static inline dma_addr_t
+dma_get_current_pos(struct dma_controller *dmac,
+                    unsigned int channel)
+{
+	return dmac->get_current_pos(dmac, channel);
+}
+
+extern int register_dma_controller(struct dma_controller *dmac);
+extern struct dma_controller *find_dma_controller(int id);
+
+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/dma-mapping.h linux-2.6.20.4-atmel/include/asm-avr32/dma-mapping.h
--- linux-2.6.20.4-0rig/include/asm-avr32/dma-mapping.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/dma-mapping.h	2007-03-24 16:42:28.000000000 +0100
@@ -32,6 +32,14 @@
 	return 0;
 }
 
+/*
+ * dma_map_single can't fail as it is implemented now.
+ */
+static inline int dma_mapping_error(dma_addr_t addr)
+{
+	return 0;
+}
+
 /**
  * dma_alloc_coherent - allocate consistent memory for DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/gpio.h linux-2.6.20.4-atmel/include/asm-avr32/gpio.h
--- linux-2.6.20.4-0rig/include/asm-avr32/gpio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/gpio.h	2007-03-24 16:42:28.000000000 +0100
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_GPIO_H
+#define __ASM_AVR32_GPIO_H
+
+#include <asm/arch/gpio.h>
+
+#endif /* __ASM_AVR32_GPIO_H */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/ide.h linux-2.6.20.4-atmel/include/asm-avr32/ide.h
--- linux-2.6.20.4-0rig/include/asm-avr32/ide.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/ide.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,36 @@
+/*
+ *  linux/include/asm-arm/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the ARM architecture specific IDE code.
+ */
+
+#ifndef __ASMAVR32_IDE_H
+#define __ASMAVR32_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	4
+#endif
+
+#if !defined(CONFIG_ARCH_L7200)
+# define IDE_ARCH_OBSOLETE_INIT
+# ifdef CONFIG_ARCH_CLPS7500
+#  define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+# else
+#  define ide_default_io_ctl(base)	(0)
+# endif
+#endif /* !ARCH_L7200 */
+
+#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMAVR32_IDE_H */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/io.h linux-2.6.20.4-atmel/include/asm-avr32/io.h
--- linux-2.6.20.4-0rig/include/asm-avr32/io.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/io.h	2007-03-24 16:42:29.000000000 +0100
@@ -5,6 +5,8 @@
 
 #ifdef __KERNEL__
 
+#include <linux/types.h>
+
 #include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
@@ -28,45 +30,72 @@
  * Generic IO read/write.  These perform native-endian accesses.  Note
  * that some architectures will want to re-define __raw_{read,write}w.
  */
-extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
-extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
-extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *)addr = v;
+}
+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *)addr = v;
+}
+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *)addr = v;
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *)addr;
+}
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *)addr;
+}
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *)addr;
+}
 
-extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
-extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
-extern void __raw_readsl(unsigned int addr, void *data, int longlen);
+#define __swizzle_addr_b(addr)					\
+	((typeof(addr))((unsigned long)(addr) ^ 3UL))
+#define __swizzle_addr_w(addr)					\
+	((typeof(addr))((unsigned long)(addr) ^ 2UL))
+#define __swizzle_addr_l(addr)					\
+	(addr)
 
-static inline void writeb(unsigned char b, volatile void __iomem *addr)
+static inline void writeb(u8 v, volatile void __iomem *addr)
 {
-	*(volatile unsigned char __force *)addr = b;
+	__raw_writeb(v, __swizzle_addr_b(addr));
 }
-static inline void writew(unsigned short b, volatile void __iomem *addr)
+static inline void writew(u16 v, volatile void __iomem *addr)
 {
-	*(volatile unsigned short __force *)addr = b;
+	__raw_writew(v, __swizzle_addr_w(addr));
 }
-static inline void writel(unsigned int b, volatile void __iomem *addr)
+static inline void writel(u32 v, volatile void __iomem *addr)
 {
-	*(volatile unsigned int __force *)addr = b;
+	__raw_writel(v, __swizzle_addr_l(addr));
 }
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
 
-static inline unsigned char readb(const volatile void __iomem *addr)
+static inline u8 readb(const volatile void __iomem *addr)
 {
-	return *(const volatile unsigned char __force *)addr;
+	return __raw_readb(__swizzle_addr_b(addr));
 }
-static inline unsigned short readw(const volatile void __iomem *addr)
+static inline u16 readw(const volatile void __iomem *addr)
 {
-	return *(const volatile unsigned short __force *)addr;
+	return __raw_readw(__swizzle_addr_w(addr));
 }
-static inline unsigned int readl(const volatile void __iomem *addr)
+static inline u32 readl(const volatile void __iomem *addr)
 {
-	return *(const volatile unsigned int __force *)addr;
+	return __raw_readl(__swizzle_addr_l(addr));
 }
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
 
 #define writesb(p, d, l)	__raw_writesb((unsigned int)p, d, l)
 #define writesw(p, d, l)	__raw_writesw((unsigned int)p, d, l)
@@ -108,17 +137,13 @@
 
 #endif
 
-
-/*
- * These two are only here because ALSA _thinks_ it needs them...
- */
 static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
 				 unsigned long count)
 {
 	char *p = to;
 	while (count) {
 		count--;
-		*p = readb(from);
+		*p = __raw_readb(from);
 		p++;
 		from++;
 	}
@@ -130,7 +155,7 @@
 	const char *p = from;
 	while (count) {
 		count--;
-		writeb(*p, to);
+		__raw_writeb(*p, to);
 		p++;
 		to++;
 	}
@@ -252,6 +277,9 @@
 #define ioremap(offset, size)			\
 	__ioremap((offset), (size), 0)
 
+#define ioremap_nocache(offset, size)		\
+	__ioremap((offset), (size), 0)
+
 #define iounmap(addr)				\
 	__iounmap(addr)
 
@@ -263,6 +291,14 @@
 #define page_to_bus page_to_phys
 #define bus_to_page phys_to_page
 
+/*
+ * Create a virtual mapping cookie for an IO port range.  There exists
+ * no such thing as port-based I/O on AVR32, so a regular ioremap()
+ * should do what we need.
+ */
+#define ioport_map(port, nr)	ioremap(port, nr)
+#define ioport_unmap(port)	iounmap(port)
+
 #define dma_cache_wback_inv(_start, _size)	\
 	flush_dcache_region(_start, _size)
 #define dma_cache_inv(_start, _size)		\
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/irq.h linux-2.6.20.4-atmel/include/asm-avr32/irq.h
--- linux-2.6.20.4-0rig/include/asm-avr32/irq.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/irq.h	2007-03-24 16:42:28.000000000 +0100
@@ -2,8 +2,12 @@
 #define __ASM_AVR32_IRQ_H
 
 #define NR_INTERNAL_IRQS	64
-#define NR_EXTERNAL_IRQS	64
-#define NR_IRQS			(NR_INTERNAL_IRQS + NR_EXTERNAL_IRQS)
+
+#include <asm/arch/irq.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS			(NR_INTERNAL_IRQS)
+#endif
 
 #define irq_canonicalize(i)	(i)
 
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/Kbuild linux-2.6.20.4-atmel/include/asm-avr32/Kbuild
--- linux-2.6.20.4-0rig/include/asm-avr32/Kbuild	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/Kbuild	2007-03-24 16:42:28.000000000 +0100
@@ -1,3 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-headers-y	+= cachectl.h
+header-y	+= cachectl.h
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/periph/lcdc.h linux-2.6.20.4-atmel/include/asm-avr32/periph/lcdc.h
--- linux-2.6.20.4-0rig/include/asm-avr32/periph/lcdc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/periph/lcdc.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,271 @@
+/*
+ * Register definitions for Atmel/SIDSA LCD Controller
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PERIPH_LCDC_H__
+#define __ASM_AVR32_PERIPH_LCDC_H__
+
+#define LCDC_CONTRAST_CTR                       0x00000840
+# define LCDC_CONTRAST_CTR_ENA_OFFSET           3
+# define LCDC_CONTRAST_CTR_ENA_SIZE             1
+# define LCDC_CONTRAST_CTR_POL_OFFSET           2
+# define LCDC_CONTRAST_CTR_POL_SIZE             1
+# define LCDC_CONTRAST_CTR_PS_OFFSET            0
+# define LCDC_CONTRAST_CTR_PS_SIZE              2
+#define LCDC_CONTRAST_VAL                       0x00000844
+# define LCDC_CONTRAST_VAL_CVAL_OFFSET          0
+# define LCDC_CONTRAST_VAL_CVAL_SIZE            8
+#define LCDC_DMABADDR1                          0x00000000
+# define LCDC_DMABADDR1_BADDR_U_OFFSET          0
+# define LCDC_DMABADDR1_BADDR_U_SIZE            32
+#define LCDC_DMABADDR2                          0x00000004
+# define LCDC_DMABADDR2_BADDR_L_OFFSET          0
+# define LCDC_DMABADDR2_BADDR_L_SIZE            32
+#define LCDC_DMACON                             0x0000001C
+# define LCDC_DMACON_DMABUSY_OFFSET             2
+# define LCDC_DMACON_DMABUSY_SIZE               1
+# define LCDC_DMACON_DMAEN_OFFSET               0
+# define LCDC_DMACON_DMAEN_SIZE                 1
+# define LCDC_DMACON_DMARST_OFFSET              1
+# define LCDC_DMACON_DMARST_SIZE                1
+# define LCDC_DMACON_DMAUPDT_OFFSET             3
+# define LCDC_DMACON_DMAUPDT_SIZE               1
+# define LCDC_DMACON_DMA2DEN_OFFSET             4
+# define LCDC_DMACON_DMA2DEN_SIZE               1
+#define LCDC_DMAFRMADD1                         0x00000010
+# define LCDC_DMAFRMADD1_FRMADD_U_OFFSET        0
+# define LCDC_DMAFRMADD1_FRMADD_U_SIZE          32
+#define LCDC_DMAFRMADD2                         0x00000014
+# define LCDC_DMAFRMADD2_FRMADD_L_OFFSET        0
+# define LCDC_DMAFRMADD2_FRMADD_L_SIZE          32
+#define LCDC_DMAFRMCFG                          0x00000018
+# define LCDC_DMAFRMCFG_BRSTLEN_OFFSET          24
+# define LCDC_DMAFRMCFG_BRSTLEN_SIZE            7
+# define LCDC_DMAFRMCFG_FRMSIZE_OFFSET          0
+# define LCDC_DMAFRMCFG_FRMSIZE_SIZE            23
+#define LCDC_DMAFRMPT1                          0x00000008
+# define LCDC_DMAFRMPT1_FRMPT_U_OFFSET          0
+# define LCDC_DMAFRMPT1_FRMPT_U_SIZE            23
+#define LCDC_DMAFRMPT2                          0x0000000C
+# define LCDC_DMAFRMPT2_FRMPT_L_OFFSET          0
+# define LCDC_DMAFRMPT2_FRMPT_L_SIZE            23
+#define LCDC_DMA2DCFG                           0x00000020
+# define LCDC_DMA2DCFG_ADDRINC_OFFSET           0
+# define LCDC_DMA2DCFG_ADDRINC_SIZE             16
+# define LCDC_DMA2DCFG_PIXELOFF_OFFSET          24
+# define LCDC_DMA2DCFG_PIXELOFF_SIZE            5
+#define LCDC_DP1_2                              0x0000081C
+# define LCDC_DP1_2_DP1_2_OFFSET                0
+# define LCDC_DP1_2_DP1_2_SIZE                  8
+#define LCDC_DP2_3                              0x00000828
+# define LCDC_DP2_3_DP2_3_OFFSET                0
+# define LCDC_DP2_3_DP2_3_SIZE                  12
+#define LCDC_DP3_4                              0x00000830
+# define LCDC_DP3_4_DP3_4_OFFSET                0
+# define LCDC_DP3_4_DP3_4_SIZE                  16
+#define LCDC_DP3_5                              0x00000824
+# define LCDC_DP3_5_DP3_5_OFFSET                0
+# define LCDC_DP3_5_DP3_5_SIZE                  20
+#define LCDC_DP4_5                              0x00000834
+# define LCDC_DP4_5_DP4_5_OFFSET                0
+# define LCDC_DP4_5_DP4_5_SIZE                  20
+#define LCDC_DP4_7                              0x00000820
+# define LCDC_DP4_7_DP4_7_OFFSET                0
+# define LCDC_DP4_7_DP4_7_SIZE                  28
+#define LCDC_DP5_7                              0x0000082C
+# define LCDC_DP5_7_DP5_7_OFFSET                0
+# define LCDC_DP5_7_DP5_7_SIZE                  28
+#define LCDC_DP6_7                              0x00000838
+# define LCDC_DP6_7_DP6_7_OFFSET                0
+# define LCDC_DP6_7_DP6_7_SIZE                  28
+#define LCDC_LCDCON1                            0x00000800
+# define LCDC_LCDCON1_BYPASS_OFFSET             0
+# define LCDC_LCDCON1_BYPASS_SIZE               1
+# define LCDC_LCDCON1_CLKVAL_OFFSET             12
+# define LCDC_LCDCON1_CLKVAL_SIZE               9
+# define LCDC_LCDCON1_LINECNT_OFFSET            21
+# define LCDC_LCDCON1_LINECNT_SIZE              11
+#define LCDC_LCDCON2                            0x00000804
+# define LCDC_LCDCON2_CLKMOD_OFFSET             15
+# define LCDC_LCDCON2_CLKMOD_SIZE               1
+# define LCDC_LCDCON2_DISTYPE_OFFSET            0
+# define LCDC_LCDCON2_DISTYPE_SIZE              2
+# define LCDC_LCDCON2_IFWIDTH_OFFSET            3
+# define LCDC_LCDCON2_IFWIDTH_SIZE              2
+# define LCDC_LCDCON2_INVCLK_OFFSET             11
+# define LCDC_LCDCON2_INVCLK_SIZE               1
+# define LCDC_LCDCON2_INVDVAL_OFFSET            12
+# define LCDC_LCDCON2_INVDVAL_SIZE              1
+# define LCDC_LCDCON2_INVFRAME_OFFSET           9
+# define LCDC_LCDCON2_INVFRAME_SIZE             1
+# define LCDC_LCDCON2_INVLINE_OFFSET            10
+# define LCDC_LCDCON2_INVLINE_SIZE              1
+# define LCDC_LCDCON2_INVVD_OFFSET              8
+# define LCDC_LCDCON2_INVVD_SIZE                1
+# define LCDC_LCDCON2_MEMOR_OFFSET              30
+# define LCDC_LCDCON2_MEMOR_SIZE                2
+# define LCDC_LCDCON2_PIXELSIZE_OFFSET          5
+# define LCDC_LCDCON2_PIXELSIZE_SIZE            3
+# define LCDC_LCDCON2_SCANMOD_OFFSET            2
+# define LCDC_LCDCON2_SCANMOD_SIZE              1
+#define LCDC_LCDFIFO                            0x00000814
+# define LCDC_LCDFIFO_FIFOTH_OFFSET             0
+# define LCDC_LCDFIFO_FIFOTH_SIZE               16
+#define LCDC_LCDFRMCFG                          0x00000810
+# define LCDC_LCDFRMCFG_LINESIZE_OFFSET         21
+# define LCDC_LCDFRMCFG_LINESIZE_SIZE           11
+# define LCDC_LCDFRMCFG_LINEVAL_OFFSET          0
+# define LCDC_LCDFRMCFG_LINEVAL_SIZE            11
+#define LCDC_LCDMVAL                            0x00000818
+# define LCDC_LCDMVAL_MMODE_OFFSET              31
+# define LCDC_LCDMVAL_MMODE_SIZE                1
+# define LCDC_LCDMVAL_MVAL_OFFSET               0
+# define LCDC_LCDMVAL_MVAL_SIZE                 8
+#define LCDC_LCDTIM1                            0x00000808
+# define LCDC_LCDTIM1_VBP_OFFSET                8
+# define LCDC_LCDTIM1_VBP_SIZE                  8
+# define LCDC_LCDTIM1_VFP_OFFSET                0
+# define LCDC_LCDTIM1_VFP_SIZE                  8
+# define LCDC_LCDTIM1_VHDLY_OFFSET              24
+# define LCDC_LCDTIM1_VHDLY_SIZE                4
+# define LCDC_LCDTIM1_VPW_OFFSET                16
+# define LCDC_LCDTIM1_VPW_SIZE                  6
+#define LCDC_LCDTIM2                            0x0000080C
+# define LCDC_LCDTIM2_HBP_OFFSET                0
+# define LCDC_LCDTIM2_HBP_SIZE                  8
+# define LCDC_LCDTIM2_HFP_OFFSET                21
+# define LCDC_LCDTIM2_HFP_SIZE                  11
+# define LCDC_LCDTIM2_HPW_OFFSET                8
+# define LCDC_LCDTIM2_HPW_SIZE                  6
+#define LCDC_LCD_GPR                            0x0000085C
+# define LCDC_LCD_GPR_GPRB0_OFFSET              0
+# define LCDC_LCD_GPR_GPRB0_SIZE                1
+# define LCDC_LCD_GPR_GPRB1_OFFSET              1
+# define LCDC_LCD_GPR_GPRB1_SIZE                1
+# define LCDC_LCD_GPR_GPRB2_OFFSET              2
+# define LCDC_LCD_GPR_GPRB2_SIZE                1
+# define LCDC_LCD_GPR_GPRB3_OFFSET              3
+# define LCDC_LCD_GPR_GPRB3_SIZE                1
+# define LCDC_LCD_GPR_GPRB4_OFFSET              4
+# define LCDC_LCD_GPR_GPRB4_SIZE                1
+# define LCDC_LCD_GPR_GPRB5_OFFSET              5
+# define LCDC_LCD_GPR_GPRB5_SIZE                1
+# define LCDC_LCD_GPR_GPRB6_OFFSET              6
+# define LCDC_LCD_GPR_GPRB6_SIZE                1
+# define LCDC_LCD_GPR_GPRB7_OFFSET              7
+# define LCDC_LCD_GPR_GPRB7_SIZE                1
+#define LCDC_LCD_ICR                            0x00000858
+# define LCDC_LCD_ICR_EOFIC_OFFSET              2
+# define LCDC_LCD_ICR_EOFIC_SIZE                1
+# define LCDC_LCD_ICR_LNIC_OFFSET               0
+# define LCDC_LCD_ICR_LNIC_SIZE                 1
+# define LCDC_LCD_ICR_LSTLNIC_OFFSET            1
+# define LCDC_LCD_ICR_LSTLNIC_SIZE              1
+# define LCDC_LCD_ICR_MERIC_OFFSET              6
+# define LCDC_LCD_ICR_MERIC_SIZE                1
+# define LCDC_LCD_ICR_OWRIC_OFFSET              5
+# define LCDC_LCD_ICR_OWRIC_SIZE                1
+# define LCDC_LCD_ICR_UFLWIC_OFFSET             4
+# define LCDC_LCD_ICR_UFLWIC_SIZE               1
+#define LCDC_LCD_IDR                            0x0000084C
+# define LCDC_LCD_IDR_EOFID_OFFSET              2
+# define LCDC_LCD_IDR_EOFID_SIZE                1
+# define LCDC_LCD_IDR_LNID_OFFSET               0
+# define LCDC_LCD_IDR_LNID_SIZE                 1
+# define LCDC_LCD_IDR_LSTLNID_OFFSET            1
+# define LCDC_LCD_IDR_LSTLNID_SIZE              1
+# define LCDC_LCD_IDR_MERID_OFFSET              6
+# define LCDC_LCD_IDR_MERID_SIZE                1
+# define LCDC_LCD_IDR_OWRID_OFFSET              5
+# define LCDC_LCD_IDR_OWRID_SIZE                1
+# define LCDC_LCD_IDR_UFLWID_OFFSET             4
+# define LCDC_LCD_IDR_UFLWID_SIZE               1
+#define LCDC_LCD_IER                            0x00000848
+# define LCDC_LCD_IER_EOFIE_OFFSET              2
+# define LCDC_LCD_IER_EOFIE_SIZE                1
+# define LCDC_LCD_IER_LNIE_OFFSET               0
+# define LCDC_LCD_IER_LNIE_SIZE                 1
+# define LCDC_LCD_IER_LSTLNIE_OFFSET            1
+# define LCDC_LCD_IER_LSTLNIE_SIZE              1
+# define LCDC_LCD_IER_MERIE_OFFSET              6
+# define LCDC_LCD_IER_MERIE_SIZE                1
+# define LCDC_LCD_IER_OWRIE_OFFSET              5
+# define LCDC_LCD_IER_OWRIE_SIZE                1
+# define LCDC_LCD_IER_UFLWIE_OFFSET             4
+# define LCDC_LCD_IER_UFLWIE_SIZE               1
+#define LCDC_LCD_IMR                            0x00000850
+# define LCDC_LCD_IMR_EOFIM_OFFSET              2
+# define LCDC_LCD_IMR_EOFIM_SIZE                1
+# define LCDC_LCD_IMR_LNIM_OFFSET               0
+# define LCDC_LCD_IMR_LNIM_SIZE                 1
+# define LCDC_LCD_IMR_LSTLNIM_OFFSET            1
+# define LCDC_LCD_IMR_LSTLNIM_SIZE              1
+# define LCDC_LCD_IMR_MERIM_OFFSET              6
+# define LCDC_LCD_IMR_MERIM_SIZE                1
+# define LCDC_LCD_IMR_OWRIM_OFFSET              5
+# define LCDC_LCD_IMR_OWRIM_SIZE                1
+# define LCDC_LCD_IMR_UFLWIM_OFFSET             4
+# define LCDC_LCD_IMR_UFLWIM_SIZE               1
+#define LCDC_LCD_IRR                            0x00000864
+# define LCDC_LCD_IRR_EOFIR_OFFSET              2
+# define LCDC_LCD_IRR_EOFIR_SIZE                1
+# define LCDC_LCD_IRR_LNIR_OFFSET               0
+# define LCDC_LCD_IRR_LNIR_SIZE                 1
+# define LCDC_LCD_IRR_LSTLNIR_OFFSET            1
+# define LCDC_LCD_IRR_LSTLNIR_SIZE              1
+# define LCDC_LCD_IRR_MERIR_OFFSET              6
+# define LCDC_LCD_IRR_MERIR_SIZE                1
+# define LCDC_LCD_IRR_OWRIR_OFFSET              5
+# define LCDC_LCD_IRR_OWRIR_SIZE                1
+# define LCDC_LCD_IRR_UFLWIR_OFFSET             4
+# define LCDC_LCD_IRR_UFLWIR_SIZE               1
+#define LCDC_LCD_ISR                            0x00000854
+# define LCDC_LCD_ISR_EOFIS_OFFSET              2
+# define LCDC_LCD_ISR_EOFIS_SIZE                1
+# define LCDC_LCD_ISR_LNIS_OFFSET               0
+# define LCDC_LCD_ISR_LNIS_SIZE                 1
+# define LCDC_LCD_ISR_LSTLNIS_OFFSET            1
+# define LCDC_LCD_ISR_LSTLNIS_SIZE              1
+# define LCDC_LCD_ISR_MERIS_OFFSET              6
+# define LCDC_LCD_ISR_MERIS_SIZE                1
+# define LCDC_LCD_ISR_OWRIS_OFFSET              5
+# define LCDC_LCD_ISR_OWRIS_SIZE                1
+# define LCDC_LCD_ISR_UFLWIS_OFFSET             4
+# define LCDC_LCD_ISR_UFLWIS_SIZE               1
+#define LCDC_LCD_ITR                            0x00000860
+# define LCDC_LCD_ITR_EOFIT_OFFSET              2
+# define LCDC_LCD_ITR_EOFIT_SIZE                1
+# define LCDC_LCD_ITR_LNIT_OFFSET               0
+# define LCDC_LCD_ITR_LNIT_SIZE                 1
+# define LCDC_LCD_ITR_LSTLNIT_OFFSET            1
+# define LCDC_LCD_ITR_LSTLNIT_SIZE              1
+# define LCDC_LCD_ITR_MERIT_OFFSET              6
+# define LCDC_LCD_ITR_MERIT_SIZE                1
+# define LCDC_LCD_ITR_OWRIT_OFFSET              5
+# define LCDC_LCD_ITR_OWRIT_SIZE                1
+# define LCDC_LCD_ITR_UFLWIT_OFFSET             4
+# define LCDC_LCD_ITR_UFLWIT_SIZE               1
+#define LCDC_PWRCON                             0x0000083C
+# define LCDC_PWRCON_GUARD_TIME_OFFSET          1
+# define LCDC_PWRCON_GUARD_TIME_SIZE            7
+# define LCDC_PWRCON_LCD_BUSY_OFFSET            31
+# define LCDC_PWRCON_LCD_BUSY_SIZE              1
+# define LCDC_PWRCON_LCD_PWR_OFFSET             0
+# define LCDC_PWRCON_LCD_PWR_SIZE               1
+
+#define LCDC_BIT(name)                          (1 << LCDC_##name##_OFFSET)
+#define LCDC_MKBF(name,value)                   (((value) & ((1 << LCDC_##name##_SIZE) - 1)) << LCDC_##name##_OFFSET)
+#define LCDC_GETBF(name,value)                  (((value) >> LCDC_##name##_OFFSET) & ((1 << LCDC_##name##_SIZE) - 1))
+#define LCDC_INSBF(name,value,old)              (((old) & ~(((1 << LCDC_##name##_SIZE) - 1) << LCDC_##name##_OFFSET)) | LCDC_MKBF(name, value))
+
+#define lcdc_readl(port,reg)				\
+	__raw_readl((port)->regs + LCDC_##reg)
+#define lcdc_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + LCDC_##reg)
+
+#endif /* __ASM_AVR32_PERIPH_LCDC_H__ */
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/posix_types.h linux-2.6.20.4-atmel/include/asm-avr32/posix_types.h
--- linux-2.6.20.4-0rig/include/asm-avr32/posix_types.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/posix_types.h	2007-03-24 16:42:28.000000000 +0100
@@ -23,7 +23,7 @@
 typedef unsigned int	__kernel_uid_t;
 typedef unsigned int	__kernel_gid_t;
 typedef unsigned long	__kernel_size_t;
-typedef int             __kernel_ssize_t;
+typedef long		__kernel_ssize_t;
 typedef int             __kernel_ptrdiff_t;
 typedef long            __kernel_time_t;
 typedef long            __kernel_suseconds_t;
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/uaccess.h linux-2.6.20.4-atmel/include/asm-avr32/uaccess.h
--- linux-2.6.20.4-0rig/include/asm-avr32/uaccess.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/uaccess.h	2007-03-24 16:42:28.000000000 +0100
@@ -68,12 +68,6 @@
 
 #define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
 
-static inline int
-verify_area(int type, const void __user *addr, unsigned long size)
-{
-	return access_ok(type, addr, size) ? 0 : -EFAULT;
-}
-
 /* Generic arbitrary sized copy. Return the number of bytes NOT copied */
 extern __kernel_size_t __copy_user(void *to, const void *from,
 				   __kernel_size_t n);
diff -urN linux-2.6.20.4-0rig/include/asm-avr32/unistd.h linux-2.6.20.4-atmel/include/asm-avr32/unistd.h
--- linux-2.6.20.4-0rig/include/asm-avr32/unistd.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/asm-avr32/unistd.h	2007-03-24 16:42:28.000000000 +0100
@@ -120,7 +120,7 @@
 #define __NR_getitimer		105
 #define __NR_swapoff		106
 #define __NR_sysinfo		107
-#define __NR_ipc		108
+/* 108 was __NR_ipc for a little while */
 #define __NR_sendfile		109
 #define __NR_setdomainname	110
 #define __NR_uname		111
@@ -282,8 +282,21 @@
 #define __NR_vmsplice		264
 #define __NR_epoll_pwait	265
 
+#define __NR_msgget		266
+#define __NR_msgsnd		267
+#define __NR_msgrcv		268
+#define __NR_msgctl		269
+#define __NR_semget		270
+#define __NR_semop		271
+#define __NR_semctl		272
+#define __NR_semtimedop		273
+#define __NR_shmat		274
+#define __NR_shmget		275
+#define __NR_shmdt		276
+#define __NR_shmctl		277
+
 #ifdef __KERNEL__
-#define NR_syscalls		266
+#define NR_syscalls		278
 
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
diff -urN linux-2.6.20.4-0rig/include/linux/atmel_pdc.h linux-2.6.20.4-atmel/include/linux/atmel_pdc.h
--- linux-2.6.20.4-0rig/include/linux/atmel_pdc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/linux/atmel_pdc.h	2007-03-24 16:39:16.000000000 +0100
@@ -0,0 +1,36 @@
+/*
+ * include/linux/atmel_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_PDC_H
+#define ATMEL_PDC_H
+
+#define ATMEL_PDC_RPR		0x100	/* Receive Pointer Register */
+#define ATMEL_PDC_RCR		0x104	/* Receive Counter Register */
+#define ATMEL_PDC_TPR		0x108	/* Transmit Pointer Register */
+#define ATMEL_PDC_TCR		0x10c	/* Transmit Counter Register */
+#define ATMEL_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+#define ATMEL_PDC_RNCR		0x114	/* Receive Next Counter Register */
+#define ATMEL_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+#define ATMEL_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+
+#define ATMEL_PDC_PTCR		0x120	/* Transfer Control Register */
+#define		ATMEL_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+#define		ATMEL_PDC_RXTDIS	(1 << 1)	/* Receiver Transfer Disable */
+#define		ATMEL_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+#define		ATMEL_PDC_TXTDIS	(1 << 9)	/* Transmitter Transfer Disable */
+
+#define ATMEL_PDC_PTSR		0x124	/* Transfer Status Register */
+
+#endif
diff -urN linux-2.6.20.4-0rig/include/linux/fb.h linux-2.6.20.4-atmel/include/linux/fb.h
--- linux-2.6.20.4-0rig/include/linux/fb.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/linux/fb.h	2007-03-24 16:42:29.000000000 +0100
@@ -192,6 +192,7 @@
 					/* vtotal = 144d/288n/576i => PAL  */
 					/* vtotal = 121d/242n/484i => NTSC */
 #define FB_SYNC_ON_GREEN	32	/* sync on green */
+#define FB_SYNC_PCLK_RISING	64	/* pixel data sampled on rising pclk */
 
 #define FB_VMODE_NONINTERLACED  0	/* non interlaced */
 #define FB_VMODE_INTERLACED	1	/* interlaced	*/
@@ -827,7 +828,7 @@
 #define fb_writeq sbus_writeq
 #define fb_memset sbus_memset_io
 
-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
 
 #define fb_readb __raw_readb
 #define fb_readw __raw_readw
diff -urN linux-2.6.20.4-0rig/include/linux/mtd/physmap.h linux-2.6.20.4-atmel/include/linux/mtd/physmap.h
--- linux-2.6.20.4-0rig/include/linux/mtd/physmap.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/linux/mtd/physmap.h	2007-03-24 16:42:28.000000000 +0100
@@ -18,9 +18,10 @@
 #define __LINUX_MTD_PHYSMAP__
 
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 
+struct map_info;
+
 struct physmap_flash_data {
 	unsigned int		width;
 	void			(*set_vpp)(struct map_info *, int);
diff -urN linux-2.6.20.4-0rig/include/linux/spi/ads7846.h linux-2.6.20.4-atmel/include/linux/spi/ads7846.h
--- linux-2.6.20.4-0rig/include/linux/spi/ads7846.h	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/include/linux/spi/ads7846.h	2007-03-24 16:39:16.000000000 +0100
@@ -5,9 +5,17 @@
  *
  * It's OK if the min/max values are zero.
  */
+enum ads7846_filter {
+	ADS7846_FILTER_OK,
+	ADS7846_FILTER_REPEAT,
+	ADS7846_FILTER_IGNORE,
+};
+
 struct ads7846_platform_data {
 	u16	model;			/* 7843, 7845, 7846. */
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
+	int	keep_vref_on:1;		/* set to keep vref on for differential
+					 * measurements as well */
 	u16	x_plate_ohms;
 	u16	y_plate_ohms;
 
@@ -21,5 +29,9 @@
 	u16	debounce_rep;		/* additional consecutive good readings
 					 * required after the first two */
 	int	(*get_pendown_state)(void);
+	int	(*filter_init)	(struct ads7846_platform_data *pdata,
+				 void **filter_data);
+	int	(*filter)	(void *filter_data, int data_idx, int *val);
+	void	(*filter_cleanup)(void *filter_data);
 };
 
diff -urN linux-2.6.20.4-0rig/include/video/atmel_lcdc.h linux-2.6.20.4-atmel/include/video/atmel_lcdc.h
--- linux-2.6.20.4-0rig/include/video/atmel_lcdc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/include/video/atmel_lcdc.h	2007-03-24 16:39:16.000000000 +0100
@@ -0,0 +1,193 @@
+/*
+ *  include/video/atmel_lcdc.h
+ *
+ *  Header file for AT91/AT32 LCD Controller
+ *
+ *  Data structure and register user interface
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+ /* LCD Controller info data structure */
+struct atmel_lcdfb_info {
+	spinlock_t		lock;
+	struct fb_info		*info;
+	void __iomem		*mmio;
+	unsigned long		irq_base;
+	dma_addr_t		map_dma;
+	void			*map_cpu;
+	size_t			map_size;
+
+	unsigned int		guard_time;
+	struct platform_device	*pdev;
+	struct clk		*bus_clk;
+	struct clk		*lcdc_clk;
+	unsigned int		default_bpp;
+	unsigned int		default_lcdcon2;
+	unsigned int		default_dmacon;
+	int			default_flags;
+	u8			power_control_pin;
+	struct fb_monspecs	 *default_monspecs;
+};
+
+#define ATMEL_LCDC_DMABADDR1	0x00		/* DMA Base Address Register 1 */
+#define ATMEL_LCDC_DMABADDR2	0x04		/* DMA Base Address Register 2 */
+#define ATMEL_LCDC_DMAFRMPT1	0x08		/* DMA Frame Pointer Register 1 */
+#define ATMEL_LCDC_DMAFRMPT2	0x0c		/* DMA Frame Pointer Register 2 */
+#define ATMEL_LCDC_DMAFRMADD1	0x10		/* DMA Frame Address Register 1 */
+#define ATMEL_LCDC_DMAFRMADD2	0x14		/* DMA Frame Address Register 2 */
+
+#define ATMEL_LCDC_DMAFRMCFG	0x18		/* DMA Frame Configuration Register */
+#define		ATMEL_LCDC_FRSIZE	(0x7fffff <<  0)	/* Frame Size */
+#define		ATMEL_LCDC_BLENGTH_OFFSET	24		/* Burst Length */
+#define		ATMEL_LCDC_BLENGTH	(0x7f     << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON	0x1c		/* DMA Control Register */
+#define		ATMEL_LCDC_DMAEN	(0x1 << 0)	/* DMA Enable */
+#define		ATMEL_LCDC_DMARST	(0x1 << 1)	/* DMA Reset */
+#define		ATMEL_LCDC_DMABUSY	(0x1 << 2)	/* DMA Busy */
+
+#define ATMEL_LCDC_LCDCON1	0x0800		/* LCD Control Register 1 */
+#define		ATMEL_LCDC_BYPASS	(1     <<  0)	/* Bypass lcd_dotck divider */
+#define		ATMEL_LCDC_CLKVAL_OFFSET	12	/* Clock Divider */
+#define		ATMEL_LCDC_CLKVAL	(0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define		ATMEL_LCDC_LINCNT	(0x7ff << 21)	/* Line Counter */
+
+#define ATMEL_LCDC_LCDCON2	0x0804		/* LCD Control Register 2 */
+#define		ATMEL_LCDC_DISTYPE	(3 << 0)	/* Display Type */
+#define			ATMEL_LCDC_DISTYPE_STNMONO	(0 << 0)
+#define			ATMEL_LCDC_DISTYPE_STNCOLOR	(1 << 0)
+#define			ATMEL_LCDC_DISTYPE_TFT		(2 << 0)
+#define		ATMEL_LCDC_SCANMOD	(1 << 2)	/* Scan Mode */
+#define			ATMEL_LCDC_SCANMOD_SINGLE	(0 << 2)
+#define			ATMEL_LCDC_SCANMOD_DUAL		(1 << 2)
+#define		ATMEL_LCDC_IFWIDTH	(3 << 3)	/*Interface Width */
+#define			ATMEL_LCDC_IFWIDTH_4		(0 << 3)
+#define			ATMEL_LCDC_IFWIDTH_8		(1 << 3)
+#define			ATMEL_LCDC_IFWIDTH_16		(2 << 3)
+#define		ATMEL_LCDC_PIXELSIZE	(7 << 5)	/* Bits per pixel */
+#define			ATMEL_LCDC_PIXELSIZE_1		(0 << 5)
+#define			ATMEL_LCDC_PIXELSIZE_2		(1 << 5)
+#define			ATMEL_LCDC_PIXELSIZE_4		(2 << 5)
+#define			ATMEL_LCDC_PIXELSIZE_8		(3 << 5)
+#define			ATMEL_LCDC_PIXELSIZE_16		(4 << 5)
+#define			ATMEL_LCDC_PIXELSIZE_24		(5 << 5)
+#define			ATMEL_LCDC_PIXELSIZE_32		(6 << 5)
+#define		ATMEL_LCDC_INVVD	(1 << 8)	/* LCD Data polarity */
+#define			ATMEL_LCDC_INVVD_NORMAL		(0 << 8)
+#define			ATMEL_LCDC_INVVD_INVERTED	(1 << 8)
+#define		ATMEL_LCDC_INVFRAME	(1 << 9 )	/* LCD VSync polarity */
+#define			ATMEL_LCDC_INVFRAME_NORMAL	(0 << 9)
+#define			ATMEL_LCDC_INVFRAME_INVERTED	(1 << 9)
+#define		ATMEL_LCDC_INVLINE	(1 << 10)	/* LCD HSync polarity */
+#define			ATMEL_LCDC_INVLINE_NORMAL	(0 << 10)
+#define			ATMEL_LCDC_INVLINE_INVERTED	(1 << 10)
+#define		ATMEL_LCDC_INVCLK	(1 << 11)	/* LCD dotclk polarity */
+#define			ATMEL_LCDC_INVCLK_NORMAL	(0 << 11)
+#define			ATMEL_LCDC_INVCLK_INVERTED	(1 << 11)
+#define		ATMEL_LCDC_INVDVAL	(1 << 12)	/* LCD dval polarity */
+#define			ATMEL_LCDC_INVDVAL_NORMAL	(0 << 12)
+#define			ATMEL_LCDC_INVDVAL_INVERTED	(1 << 12)
+#define		ATMEL_LCDC_CLKMOD	(1 << 15)	/* LCD dotclk mode */
+#define			ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
+#define			ATMEL_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
+#define		ATMEL_LCDC_MEMOR	(1 << 31)	/* Memory Ordering Format */
+#define			ATMEL_LCDC_MEMOR_BIG		(0 << 31)
+#define			ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
+
+#define ATMEL_LCDC_TIM1		0x0808		/* LCD Timing Register 1 */
+#define		ATMEL_LCDC_VFP		(0xff <<  0)	/* Vertical Front Porch */
+#define		ATMEL_LCDC_VBP_OFFSET		8	/* Vertical Back Porch */
+#define		ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
+#define		ATMEL_LCDC_VPW_OFFSET		16	/* Vertical Synchronization Pulse Width */
+#define		ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
+#define		ATMEL_LCDC_VHDLY_OFFSET		24	/* Vertical to Horizontal Delay */
+#define		ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2		0x080c		/* LCD Timing Register 2 */
+#define		ATMEL_LCDC_HBP		(0xff  <<  0)	/* Horizontal Back Porch */
+#define		ATMEL_LCDC_HPW_OFFSET		8	/* Horizontal Synchronization Pulse Width */
+#define		ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
+#define		ATMEL_LCDC_HFP_OFFSET		21	/* Horizontal Front Porch */
+#define		ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG	0x0810		/* LCD Frame Configuration Register */
+#define		ATMEL_LCDC_LINEVAL	(0x7ff <<  0)	/* Vertical Size of LCD Module */
+#define		ATMEL_LCDC_HOZVAL_OFFSET	21	/* Horizontal Size of LCD Module */
+#define		ATMEL_LCDC_HOZVAL	(0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO		0x0814		/* LCD FIFO Register */
+#define		ATMEL_LCDC_FIFOTH	(0xffff)	/* FIFO Threshold */
+
+#define ATMEL_LCDC_MVAL		0x0818		/* LCD Mode Toggle Rate Value Register */
+
+#define ATMEL_LCDC_DP1_2		0x081c		/* Dithering Pattern DP1_2 Register */
+#define ATMEL_LCDC_DP4_7		0x0820		/* Dithering Pattern DP4_7 Register */
+#define ATMEL_LCDC_DP3_5		0x0824		/* Dithering Pattern DP3_5 Register */
+#define ATMEL_LCDC_DP2_3		0x0828		/* Dithering Pattern DP2_3 Register */
+#define ATMEL_LCDC_DP5_7		0x082c		/* Dithering Pattern DP5_7 Register */
+#define ATMEL_LCDC_DP3_4		0x0830		/* Dithering Pattern DP3_4 Register */
+#define ATMEL_LCDC_DP4_5		0x0834		/* Dithering Pattern DP4_5 Register */
+#define ATMEL_LCDC_DP6_7		0x0838		/* Dithering Pattern DP6_7 Register */
+#define		ATMEL_LCDC_DP1_2_VAL	(0xff)
+#define		ATMEL_LCDC_DP4_7_VAL	(0xfffffff)
+#define		ATMEL_LCDC_DP3_5_VAL	(0xfffff)
+#define		ATMEL_LCDC_DP2_3_VAL	(0xfff)
+#define		ATMEL_LCDC_DP5_7_VAL	(0xfffffff)
+#define		ATMEL_LCDC_DP3_4_VAL	(0xffff)
+#define		ATMEL_LCDC_DP4_5_VAL	(0xfffff)
+#define		ATMEL_LCDC_DP6_7_VAL	(0xfffffff)
+
+#define ATMEL_LCDC_PWRCON	0x083c		/* Power Control Register */
+#define		ATMEL_LCDC_PWR		(1    <<  0)	/* LCD Module Power Control */
+#define		ATMEL_LCDC_GUARDT_OFFSET	1	/* Delay in Frame Period */
+#define		ATMEL_LCDC_GUARDT	(0x7f <<  ATMEL_LCDC_GUARDT_OFFSET)
+#define		ATMEL_LCDC_BUSY		(1    << 31)	/* LCD Busy */
+
+#define ATMEL_LCDC_CONTRAST_CTR	0x0840		/* Contrast Control Register */
+#define		ATMEL_LCDC_PS		(3 << 0)	/* Contrast Counter Prescaler */
+#define			ATMEL_LCDC_PS_DIV1		(0 << 0)
+#define			ATMEL_LCDC_PS_DIV2		(1 << 0)
+#define			ATMEL_LCDC_PS_DIV4		(2 << 0)
+#define			ATMEL_LCDC_PS_DIV8		(3 << 0)
+#define		ATMEL_LCDC_POL		(1 << 2)	/* Polarity of output Pulse */
+#define			ATMEL_LCDC_POL_NEGATIVE		(0 << 2)
+#define			ATMEL_LCDC_POL_POSITIVE		(1 << 2)
+#define		ATMEL_LCDC_ENA		(1 << 3)	/* PWM generator Control */
+#define			ATMEL_LCDC_ENA_PWMDISABLE	(0 << 3)
+#define			ATMEL_LCDC_ENA_PWMENABLE	(1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL	0x0844		/* Contrast Value Register */
+#define		ATMEL_LCDC_CVAL	(0xff)		/* PWM compare value */
+
+#define ATMEL_LCDC_IER		0x0848		/* Interrupt Enable Register */
+#define ATMEL_LCDC_IDR		0x084c		/* Interrupt Disable Register */
+#define ATMEL_LCDC_IMR		0x0850		/* Interrupt Mask Register */
+#define ATMEL_LCDC_ISR		0x0854		/* Interrupt Status Register */
+#define ATMEL_LCDC_ICR		0x0858		/* Interrupt Clear Register */
+#define		ATMEL_LCDC_LNI		(1 << 0)	/* Line Interrupt */
+#define		ATMEL_LCDC_LSTLNI	(1 << 1)	/* Last Line Interrupt */
+#define		ATMEL_LCDC_EOFI		(1 << 2)	/* DMA End Of Frame Interrupt */
+#define		ATMEL_LCDC_UFLWI	(1 << 4)	/* FIFO Underflow Interrupt */
+#define		ATMEL_LCDC_OWRI		(1 << 5)	/* FIFO Overwrite Interrupt */
+#define		ATMEL_LCDC_MERI		(1 << 6)	/* DMA Memory Error Interrupt */
+
+#define ATMEL_LCDC_LUT_(n)	(0x0c00 + ((n)*4))	/* Palette Entry 0..255 */
+
+#endif /* __ATMEL_LCDC_H__ */
diff -urN linux-2.6.20.4-0rig/MAINTAINERS linux-2.6.20.4-atmel/MAINTAINERS
--- linux-2.6.20.4-0rig/MAINTAINERS	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/MAINTAINERS	2007-03-24 16:43:49.000000000 +0100
@@ -602,6 +602,11 @@
 M:	hskinnemoen@atmel.com
 S:	Supported
 
+ATMEL SPI DRIVER
+P:	Haavard Skinnemoen
+M:	hskinnemoen@atmel.com
+S:	Supported
+
 ATMEL WIRELESS DRIVER
 P:	Simon Kelley
 M:	simon@thekelleys.org.uk
diff -urN linux-2.6.20.4-0rig/scripts/checkstack.pl linux-2.6.20.4-atmel/scripts/checkstack.pl
--- linux-2.6.20.4-0rig/scripts/checkstack.pl	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/scripts/checkstack.pl	2007-03-24 16:42:29.000000000 +0100
@@ -12,6 +12,7 @@
 #	sh64 port by Paul Mundt
 #	Random bits by Matt Mackall <mpm@selenic.com>
 #	M68k port by Geert Uytterhoeven and Andreas Schwab
+#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
 #
 #	Usage:
 #	objdump -d vmlinux | stackcheck.pl [arch]
@@ -37,6 +38,10 @@
 	if ($arch eq 'arm') {
 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} elsif ($arch eq 'avr32') {
+		#8000008a:       20 1d           sub sp,4
+		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
+		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
 	} elsif ($arch =~ /^i[3456]86$/) {
 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
diff -urN linux-2.6.20.4-0rig/sound/avr32/ac97c.c linux-2.6.20.4-atmel/sound/avr32/ac97c.c
--- linux-2.6.20.4-0rig/sound/avr32/ac97c.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/avr32/ac97c.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,1250 @@
+/*
+ * Driver for the Atmel AC97 Controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/ac97_codec.h>
+#ifndef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+#include <sound/memalloc.h>
+#endif
+
+#include <asm/io.h>
+
+#include "ac97c.h"
+
+static DEFINE_MUTEX(opened_mutex);
+
+/* module parameters */
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for AC97 controller");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for AC97 controller");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable AC97 controller");
+
+#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
+#include <asm/dma-controller.h>
+
+struct atmel_ac97_dma_info {
+	struct dma_request_cyclic req_tx;
+	struct dma_request_cyclic req_rx;
+	unsigned short rx_periph_id;
+	unsigned short tx_periph_id;
+};
+#endif
+
+
+typedef struct atmel_ac97 {
+	spinlock_t lock;
+	void __iomem *regs;
+	int period;
+
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+	ac97_t *ac97;
+	ac97_bus_t *ac97_bus;
+	int irq;
+	int opened;
+	u64 cur_format;
+	unsigned int cur_rate;
+	struct clk *mck;
+	struct platform_device *pdev;
+        struct atmel_ac97_dma_info dma;
+} atmel_ac97_t;
+#define get_chip(card) ((atmel_ac97_t *)(card)->private_data)
+
+#define ac97c_writel(chip, reg, val)			\
+	__raw_writel((val), (chip)->regs + AC97C_##reg)
+#define ac97c_readl(chip, reg)				\
+	__raw_readl((chip)->regs + AC97C_##reg)
+
+/* PCM part */
+
+static snd_pcm_hardware_t snd_atmel_ac97_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
+				  |SNDRV_PCM_INFO_MMAP
+				  |SNDRV_PCM_INFO_MMAP_VALID
+				  |SNDRV_PCM_INFO_BLOCK_TRANSFER
+				  |SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
+	.rate_min		= 4000,
+	.rate_max		= 48000,
+	.channels_min		= 1,
+	.channels_max		= 6,
+	.buffer_bytes_max	= 64*1024,
+	.period_bytes_min	= 512,
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	.period_bytes_max	= 64*1024,
+#else
+	.period_bytes_max	= 4095,
+#endif
+	.periods_min		= 8,
+	.periods_max		= 1024,
+};
+
+static snd_pcm_hardware_t snd_atmel_ac97_capture_hw = {
+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
+				  |SNDRV_PCM_INFO_MMAP
+				  |SNDRV_PCM_INFO_MMAP_VALID
+				  |SNDRV_PCM_INFO_BLOCK_TRANSFER
+				  |SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
+	.rate_min		= 4000,
+	.rate_max		= 48000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 64*1024,
+	.period_bytes_min	= 512,
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	.period_bytes_max	= 64*1024,
+#else
+	.period_bytes_max	= 4095,
+#endif
+	.periods_min		= 8,
+	.periods_max		= 1024,
+};
+
+/* Joint full duplex variables */
+unsigned int hw_rates[1];
+unsigned int hw_formats[1];
+struct snd_pcm_hw_constraint_list hw_constraint_rates;
+struct snd_pcm_hw_constraint_list hw_constraint_formats;
+
+/*
+ * PCM functions
+ */
+static int
+snd_atmel_ac97_playback_open(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+
+	mutex_lock(&opened_mutex);
+	chip->opened++;
+	runtime->hw = snd_atmel_ac97_playback_hw;
+	if (chip->cur_rate) {
+		runtime->hw.rate_min = chip->cur_rate;
+		runtime->hw.rate_max = chip->cur_rate;
+	}
+	if (chip->cur_format)
+		runtime->hw.formats = (1ULL<<chip->cur_format);
+	mutex_unlock(&opened_mutex);
+	chip->playback_substream = substream;
+	chip->period = 0;
+	return 0;
+}
+
+static int
+snd_atmel_ac97_capture_open(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+
+	mutex_lock(&opened_mutex);
+	chip->opened++;
+	runtime->hw = snd_atmel_ac97_capture_hw;
+	if (chip->cur_rate) {
+		runtime->hw.rate_min = chip->cur_rate;
+		runtime->hw.rate_max = chip->cur_rate;
+	}
+	if (chip->cur_format)
+		runtime->hw.formats = (1ULL<<chip->cur_format);
+	mutex_unlock(&opened_mutex);
+	chip->capture_substream = substream;
+	chip->period = 0;
+	return 0;
+}
+
+static int snd_atmel_ac97_playback_close(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	mutex_lock(&opened_mutex);
+	chip->opened--;
+	if (!chip->opened) {
+		chip->cur_rate = 0;
+		chip->cur_format = 0;
+	}
+	mutex_unlock(&opened_mutex);
+	return 0;
+}
+
+static int snd_atmel_ac97_capture_close(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	mutex_lock(&opened_mutex);
+	chip->opened--;
+	if (!chip->opened) {
+		chip->cur_rate = 0;
+		chip->cur_format = 0;
+	}
+	mutex_unlock(&opened_mutex);
+	return 0;
+}
+
+static int snd_atmel_ac97_playback_hw_params(snd_pcm_substream_t *substream,
+				    snd_pcm_hw_params_t *hw_params)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+	int err;
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+
+	if (err < 0)
+		return err;
+
+	/* Set restrictions to params */
+	mutex_lock(&opened_mutex);
+	chip->cur_rate = params_rate(hw_params);
+	chip->cur_format = params_format(hw_params);
+	mutex_unlock(&opened_mutex);
+
+	return err;
+#else
+	int pg;
+	size_t size = params_buffer_bytes(hw_params);
+	struct snd_pcm_runtime *runtime;
+	struct snd_dma_buffer *dmab = NULL;
+
+	substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
+	snd_assert(substream != NULL, return -EINVAL);
+	runtime = substream->runtime;
+	snd_assert(runtime != NULL, return -EINVAL);
+
+	/* Set restrictions to params */
+	mutex_lock(&opened_mutex);
+	chip->cur_rate = params_rate(hw_params);
+	chip->cur_format = params_format(hw_params);
+	mutex_unlock(&opened_mutex);
+
+	/* check if buffer is already allocated */
+	if (runtime->dma_buffer_p) {
+		size_t size_previouse;
+		int pg_previouse;
+
+		/* new buffer is smaler than previouse allocated buffer */
+		if (runtime->dma_buffer_p->bytes >= size) {
+			runtime->dma_bytes = size;
+			return 0; /* don't change buffer size */
+		}
+
+		size_previouse = runtime->dma_buffer_p->bytes;
+		pg_previouse = get_order(size_previouse);
+
+		dma_free_coherent(runtime->dma_buffer_p->dev.dev,
+				PAGE_SIZE << pg_previouse,
+				runtime->dma_buffer_p->area,
+				runtime->dma_buffer_p->addr);
+
+		kfree(runtime->dma_buffer_p);
+	}
+
+	dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
+	if (!dmab)
+		return -ENOMEM;
+
+	dmab->dev = substream->dma_buffer.dev;
+	dmab->bytes = 0;
+
+	pg = get_order(size);
+
+	dmab->area = dma_alloc_coherent(
+			substream->dma_buffer.dev.dev,
+			PAGE_SIZE << pg,
+			(dma_addr_t *)&dmab->addr,
+			GFP_KERNEL);
+
+	if (!dmab->area) {
+		kfree(dmab);
+		return -ENOMEM;
+	}
+
+	dmab->bytes = size;
+
+	snd_pcm_set_runtime_buffer(substream, dmab);
+	runtime->dma_bytes = size;
+	return 1;
+#endif
+}
+
+static int snd_atmel_ac97_capture_hw_params(snd_pcm_substream_t *substream,
+				    snd_pcm_hw_params_t *hw_params)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+	int err;
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+
+	if (err < 0)
+		return err;
+
+	/* Set restrictions to params */
+	mutex_lock(&opened_mutex);
+	chip->cur_rate = params_rate(hw_params);
+	chip->cur_format = params_format(hw_params);
+	mutex_unlock(&opened_mutex);
+
+	return err;
+#else
+	int pg;
+	size_t size = params_buffer_bytes(hw_params);
+	struct snd_pcm_runtime *runtime;
+	struct snd_dma_buffer *dmab = NULL;
+
+	substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
+	snd_assert(substream != NULL, return -EINVAL);
+	runtime = substream->runtime;
+	snd_assert(runtime != NULL, return -EINVAL);
+
+	/* Set restrictions to params */
+	mutex_lock(&opened_mutex);
+	chip->cur_rate = params_rate(hw_params);
+	chip->cur_format = params_format(hw_params);
+	mutex_unlock(&opened_mutex);
+
+	/* check if buffer is already allocated */
+	if (runtime->dma_buffer_p) {
+		size_t size_previouse;
+		int pg_previouse;
+
+		/* new buffer is smaler than previouse allocated buffer */
+		if (runtime->dma_buffer_p->bytes >= size) {
+			runtime->dma_bytes = size;
+			return 0; /* don't change buffer size */
+		}
+
+		size_previouse = runtime->dma_buffer_p->bytes;
+		pg_previouse = get_order(size_previouse);
+
+		dma_free_coherent(runtime->dma_buffer_p->dev.dev,
+				PAGE_SIZE << pg_previouse,
+				runtime->dma_buffer_p->area,
+				runtime->dma_buffer_p->addr);
+
+		kfree(runtime->dma_buffer_p);
+	}
+
+	dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
+	if (!dmab)
+		return -ENOMEM;
+
+	dmab->dev = substream->dma_buffer.dev;
+	dmab->bytes = 0;
+
+	pg = get_order(size);
+
+	dmab->area = dma_alloc_coherent(
+			substream->dma_buffer.dev.dev,
+			PAGE_SIZE << pg,
+			(dma_addr_t *)&dmab->addr,
+			GFP_KERNEL);
+
+	if (!dmab->area) {
+		kfree(dmab);
+		return -ENOMEM;
+	}
+
+	dmab->bytes = size;
+
+	snd_pcm_set_runtime_buffer(substream, dmab);
+	runtime->dma_bytes = size;
+	return 1;
+#endif
+}
+
+static int snd_atmel_ac97_playback_hw_free(snd_pcm_substream_t *substream)
+{
+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+	return snd_pcm_lib_free_pages(substream);
+#else
+	int pg;
+	struct snd_pcm_runtime *runtime;
+	struct snd_dma_buffer *dmab = NULL;
+
+	snd_assert(substream != NULL, return -EINVAL);
+	runtime = substream->runtime;
+	snd_assert(runtime != NULL, return -EINVAL);
+	dmab = runtime->dma_buffer_p;
+
+	if (!dmab)
+		return 0;
+
+	if (!dmab->area)
+		return 0;
+
+	pg = get_order(dmab->bytes);
+	dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
+	kfree(runtime->dma_buffer_p);
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+#endif
+}
+
+static int snd_atmel_ac97_capture_hw_free(snd_pcm_substream_t *substream)
+{
+
+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+	return snd_pcm_lib_free_pages(substream);
+#else
+	int pg;
+	struct snd_pcm_runtime *runtime;
+	struct snd_dma_buffer *dmab = NULL;
+
+	snd_assert(substream != NULL, return -EINVAL);
+	runtime = substream->runtime;
+	snd_assert(runtime != NULL, return -EINVAL);
+	dmab = runtime->dma_buffer_p;
+
+	if (!dmab)
+		return 0;
+
+	if (!dmab->area)
+		return 0;
+
+	pg = get_order(dmab->bytes);
+	dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
+	kfree(runtime->dma_buffer_p);
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+#endif
+}
+
+static int snd_atmel_ac97_playback_prepare(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	struct platform_device *pdev = chip->pdev;
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	int block_size = frames_to_bytes(runtime, runtime->period_size);
+	unsigned long word = 0;
+	unsigned long buffer_size = 0;
+
+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
+			block_size * 2, DMA_TO_DEVICE);
+
+	/* Assign slots to channels */
+	switch (substream->runtime->channels) {
+        case 1:
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
+		break;
+	case 2:
+		/* Assign Left and Right slot to Channel A */
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
+		break;
+        default:
+		/* TODO: support more than two channels */
+		return -EINVAL;
+		break;
+	}
+	ac97c_writel(chip, OCA, word);
+
+	/* Configure sample format and size */
+        word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
+        switch (runtime->format){
+        case SNDRV_PCM_FORMAT_S16_LE:
+		word |= AC97C_CMR_CEM_LITTLE;
+		break;
+        case SNDRV_PCM_FORMAT_S16_BE:
+        default:
+		word &= ~AC97C_CMR_CEM_LITTLE;
+		break;
+        }
+
+	ac97c_writel(chip, CAMR, word);
+
+        /* Set variable rate if needed */
+        if (runtime->rate != 48000) {
+		word = ac97c_readl(chip, MR);
+		word |= AC97C_MR_VRA;
+		ac97c_writel(chip, MR, word);
+        } else {
+		/* Clear Variable Rate Bit */
+		word = ac97c_readl(chip, MR);
+		word &= ~AC97C_MR_VRA;
+		ac97c_writel(chip, MR, word);
+        }
+
+        /* Set rate */
+        snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	/* Initialize and start the PDC */
+        ac97c_writel(chip, CATPR, runtime->dma_addr);
+	ac97c_writel(chip, CATCR, block_size / 4);
+	ac97c_writel(chip, CATNPR, runtime->dma_addr + block_size);
+	ac97c_writel(chip, CATNCR, block_size / 4);
+	ac97c_writel(chip, PTCR, PDC_PTCR_TXTEN);
+	/* Enable Channel A interrupts */
+	ac97c_writel(chip, IER, AC97C_SR_CAEVT);
+#else
+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
+		runtime->periods;
+
+	chip->dma.req_tx.buffer_size = buffer_size;
+        chip->dma.req_tx.periods = runtime->periods;
+
+	BUG_ON(chip->dma.req_tx.buffer_size !=
+			(chip->dma.req_tx.periods *
+			 frames_to_bytes(runtime, runtime->period_size)));
+
+        chip->dma.req_tx.buffer_start = runtime->dma_addr;
+        chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
+        chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
+        chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
+        chip->dma.req_tx.width = DMA_WIDTH_16BIT;
+        chip->dma.req_tx.dev_id = chip;
+#endif
+
+	return 0;
+}
+
+static int snd_atmel_ac97_capture_prepare(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	struct platform_device *pdev = chip->pdev;
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	int block_size = frames_to_bytes(runtime, runtime->period_size);
+	unsigned long word = 0;
+	unsigned long buffer_size = 0;
+
+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
+			block_size * 2, DMA_FROM_DEVICE);
+
+	/* Assign slots to channels */
+	switch (substream->runtime->channels) {
+        case 1:
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
+		break;
+        case 2:
+		/* Assign Left and Right slot to Channel A */
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
+		break;
+	default:
+		/* TODO: support more than two channels */
+		return -EINVAL;
+		break;
+	}
+	ac97c_writel(chip, ICA, word);
+
+	/* Configure sample format and size */
+        word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
+	switch (runtime->format) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		word |= AC97C_CMR_CEM_LITTLE;
+		break;
+	case SNDRV_PCM_FORMAT_S16_BE:
+	default:
+		word &= ~(AC97C_CMR_CEM_LITTLE);
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, word);
+
+	/* Set variable rate if needed */
+	if (runtime->rate != 48000) {
+		word = ac97c_readl(chip, MR);
+		word |= AC97C_MR_VRA;
+		ac97c_writel(chip, MR, word);
+	} else {
+		/* Clear Variable Rate Bit */
+		word = ac97c_readl(chip, MR);
+		word &= ~(AC97C_MR_VRA);
+		ac97c_writel(chip, MR, word);
+	}
+
+	/* Set rate */
+	snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	/* Initialize and start the PDC */
+	ac97c_writel(chip, CARPR, runtime->dma_addr);
+	ac97c_writel(chip, CARCR, block_size / 4);
+	ac97c_writel(chip, CARNPR, runtime->dma_addr + block_size);
+	ac97c_writel(chip, CARNCR, block_size / 4);
+	ac97c_writel(chip, PTCR, PDC_PTCR_RXEN);
+	/* Enable Channel A interrupts */
+	ac97c_writel(chip, IER, AC97C_SR_CAEVT);
+#else
+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
+		runtime->periods;
+
+	chip->dma.req_rx.buffer_size = buffer_size;
+	chip->dma.req_rx.periods = runtime->periods;
+
+	BUG_ON(chip->dma.req_rx.buffer_size !=
+			(chip->dma.req_rx.periods *
+			 frames_to_bytes(runtime, runtime->period_size)));
+
+	chip->dma.req_rx.buffer_start = runtime->dma_addr;
+	chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
+	chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
+	chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_rx.dev_id = chip;
+#endif
+
+	return 0;
+}
+
+static int snd_atmel_ac97_playback_trigger(snd_pcm_substream_t *substream, int cmd)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	unsigned long camr;
+	int flags, err = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	camr = ac97c_readl(chip, CAMR);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
+				&chip->dma.req_tx);
+		dma_start_request(chip->dma.req_tx.req.dmac,
+				chip->dma.req_tx.req.channel);
+		camr |= (AC97C_CMR_CENA
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+				|AC97C_CMR_TXRDY
+#endif
+			);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = dma_stop_request(chip->dma.req_tx.req.dmac,
+				chip->dma.req_tx.req.channel);
+		if (chip->opened <= 1) {
+			camr &= ~(AC97C_CMR_CENA
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+					|AC97C_CMR_TXRDY
+#endif
+				 );
+		}
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+		else {
+			camr &= ~(AC97C_CMR_TXRDY);
+		}
+#endif
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, camr);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return err;
+}
+
+static int snd_atmel_ac97_capture_trigger(snd_pcm_substream_t *substream, int cmd)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	unsigned long camr;
+	int flags, err = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	camr = ac97c_readl(chip, CAMR);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
+				&chip->dma.req_rx);
+		dma_start_request(chip->dma.req_rx.req.dmac,
+				chip->dma.req_rx.req.channel);
+		camr |= (AC97C_CMR_CENA
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+			 | AC97C_CMR_RXRDY
+#endif
+			);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = dma_stop_request(chip->dma.req_rx.req.dmac,
+				chip->dma.req_rx.req.channel);
+		mutex_lock(&opened_mutex);
+		if (chip->opened <= 1) {
+			camr &= ~(AC97C_CMR_CENA
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+					| AC97C_CMR_RXRDY
+#endif
+				 );
+		}
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+		else {
+			  camr &= ~(AC97C_CSR_RXRDY);
+		}
+#endif
+		mutex_unlock(&opened_mutex);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, camr);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return err;
+}
+
+static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	snd_pcm_uframes_t pos;
+	unsigned long bytes;
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	bytes = ac97c_readl(chip, CATPR) - runtime->dma_addr;
+#else
+        bytes = (dma_get_current_pos
+			(chip->dma.req_tx.req.dmac,
+			 chip->dma.req_tx.req.channel) - runtime->dma_addr);
+#endif
+	pos = bytes_to_frames(runtime, bytes);
+	if (pos >= runtime->buffer_size)
+		pos -= runtime->buffer_size;
+
+	return pos;
+}
+
+static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(snd_pcm_substream_t *substream)
+{
+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	snd_pcm_uframes_t pos;
+	unsigned long bytes;
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	bytes = ac97c_readl(chip, CARPR) - runtime->dma_addr;
+#else
+        bytes = (dma_get_current_pos
+			(chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) -
+			runtime->dma_addr);
+#endif
+	pos = bytes_to_frames(runtime, bytes);
+	if (pos >= runtime->buffer_size)
+		pos -= runtime->buffer_size;
+
+
+	return pos;
+}
+
+static snd_pcm_ops_t atmel_ac97_playback_ops = {
+	.open		= snd_atmel_ac97_playback_open,
+	.close		= snd_atmel_ac97_playback_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= snd_atmel_ac97_playback_hw_params,
+	.hw_free	= snd_atmel_ac97_playback_hw_free,
+	.prepare	= snd_atmel_ac97_playback_prepare,
+	.trigger	= snd_atmel_ac97_playback_trigger,
+	.pointer	= snd_atmel_ac97_playback_pointer,
+};
+
+static snd_pcm_ops_t atmel_ac97_capture_ops = {
+	.open		= snd_atmel_ac97_capture_open,
+	.close		= snd_atmel_ac97_capture_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= snd_atmel_ac97_capture_hw_params,
+	.hw_free	= snd_atmel_ac97_capture_hw_free,
+	.prepare	= snd_atmel_ac97_capture_prepare,
+	.trigger	= snd_atmel_ac97_capture_trigger,
+	.pointer	= snd_atmel_ac97_capture_pointer,
+};
+
+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
+	/* Playback */
+	{
+		.exclusive = 1,
+		.r = { {
+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
+					| (1 << AC97_SLOT_PCM_RIGHT)
+					| (1 << AC97_SLOT_PCM_CENTER)
+					| (1 << AC97_SLOT_PCM_SLEFT)
+					| (1 << AC97_SLOT_PCM_SRIGHT)
+					| (1 << AC97_SLOT_LFE)),
+		} }
+	},
+	/* PCM in */
+	{
+		.stream = 1,
+		.exclusive = 1,
+		.r = { {
+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
+					| (1 << AC97_SLOT_PCM_RIGHT)),
+		} }
+	},
+	/* Mic in */
+	{
+		.stream = 1,
+		.exclusive = 1,
+		.r = { {
+			.slots = (1<<AC97_SLOT_MIC),
+		} }
+	},
+};
+
+static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip)
+{
+	snd_pcm_t *pcm;
+	int err;
+
+	err = snd_ac97_pcm_assign(chip->ac97_bus,
+			ARRAY_SIZE(atmel_ac97_pcm_defs),
+			atmel_ac97_pcm_defs);
+	if (err)
+		return err;
+
+	err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
+	if (err)
+		return err;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+			&atmel_ac97_playback_ops);
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+			&atmel_ac97_capture_ops);
+
+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+					      &chip->pdev->dev,
+					      128 * 1024, 128 * 1024);
+#endif
+
+	pcm->private_data = chip;
+	pcm->info_flags = 0;
+	strcpy(pcm->name, "Atmel-AC97");
+	chip->pcm = pcm;
+
+	return 0;
+}
+
+/* Mixer part */
+static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip)
+{
+	int err;
+	ac97_template_t template;
+
+	memset(&template, 0, sizeof(template));
+	template.private_data = chip;
+	err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
+
+	return err;
+}
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+static irqreturn_t snd_atmel_ac97_interrupt(int irq, void *dev_id,
+					    struct pt_regs *regs)
+{
+	atmel_ac97_t *chip = dev_id;
+	unsigned long status;
+
+	status = ac97c_readl(chip, SR);
+
+	if (status & AC97C_SR_CAEVT) {
+		snd_pcm_runtime_t *runtime;
+		int offset, next_period, block_size;
+		unsigned long casr;
+
+		/* FIXME: separate playback from capture */
+		runtime = chip->playback_substream->runtime;
+		block_size = frames_to_bytes(runtime, runtime->period_size);
+
+		casr = ac97c_readl(chip, CASR);
+
+		if (casr & AC97C_CSR_ENDTX) {
+			chip->period++;
+			if (chip->period == runtime->periods)
+				chip->period = 0;
+			next_period = chip->period + 1;
+			if (next_period == runtime->periods)
+				next_period = 0;
+
+			offset = block_size * next_period;
+
+			ac97c_writel(chip, CATNPR,
+				     runtime->dma_addr + offset);
+			ac97c_writel(chip, CATNCR, block_size / 4);
+
+			snd_pcm_period_elapsed(chip->playback_substream);
+		}
+		else if (casr & AC97C_CSR_ENDRX) {
+			chip->period++;
+			if (chip->period == runtime->periods)
+				chip->period = 0;
+			next_period = chip->period + 1;
+			if (next_period == runtime->periods)
+				next_period = 0;
+
+			offset = block_size * next_period;
+
+			ac97c_writel(chip, CARNPR,
+				     runtime->dma_addr + offset);
+			ac97c_writel(chip, CARNCR, block_size / 4);
+
+			snd_pcm_period_elapsed(chip->capture_substream);
+		} else {
+			snd_printk(KERN_INFO
+			       "atmel-ac97: spurious interrupt, status = 0x%08lx\n",
+			       (unsigned long)casr);
+		}
+	} else {
+		snd_printk(KERN_INFO
+		       "atmel-ac97: spurious interrupt, status = 0x%08lx\n",
+		       status);
+	}
+
+	(volatile int)ac97c_readl(chip, SR);
+
+	return IRQ_HANDLED;
+}
+
+#else
+
+static void atmel_ac97_error(struct dma_request *_req)
+{
+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
+
+	printk(KERN_WARNING
+	       "DMA Controller error, channel %d (AC97C)\n",
+	       req->req.channel);
+}
+
+static void atmel_ac97_block_complete(struct dma_request *_req)
+{
+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
+	atmel_ac97_t *chip = req->dev_id;
+	if (req->periph_id == chip->dma.tx_periph_id)
+		snd_pcm_period_elapsed(chip->playback_substream);
+	else
+		snd_pcm_period_elapsed(chip->capture_substream);
+}
+
+#endif
+
+/* CODEC part */
+
+static void snd_atmel_ac97_write(ac97_t *ac97, unsigned short reg,
+				 unsigned short val)
+{
+	atmel_ac97_t *chip = ac97->private_data;
+	unsigned long word;
+	int timeout = 40;
+
+	word = (reg & 0x7f) << 16 | val;
+
+	do {
+		if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
+			ac97c_writel(chip, COTHR, word);
+			return;
+		}
+		udelay(1);
+	} while (--timeout);
+
+	snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n");
+}
+
+static unsigned short snd_atmel_ac97_read(ac97_t *ac97,
+					  unsigned short reg)
+{
+	atmel_ac97_t *chip = ac97->private_data;
+	unsigned long word;
+	int timeout = 40;
+	int write = 10;
+
+	word = (0x80 | (reg & 0x7f)) << 16;
+
+	if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
+		ac97c_readl(chip, CORHR);
+
+retry_write:
+	timeout = 40;
+
+	do {
+                if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
+			ac97c_writel(chip, COTHR, word);
+			goto read_reg;
+                }
+		mdelay(10);
+	} while (--timeout);
+
+	if (!--write)
+		goto timed_out;
+	goto retry_write;
+
+read_reg:
+	do {
+		if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){
+			unsigned short val = ac97c_readl(chip, CORHR);
+			return val;
+		}
+		mdelay(10);
+	} while (--timeout);
+
+	if (!--write)
+		goto timed_out;
+	goto retry_write;
+
+timed_out:
+	snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n");
+	return 0xffff;
+}
+
+static void snd_atmel_ac97_reset(atmel_ac97_t *chip)
+{
+	/* TODO: Perform hard reset of codec as well */
+	ac97c_writel(chip, MR, AC97C_MR_WRST);
+	mdelay(1);
+	ac97c_writel(chip, MR, AC97C_MR_ENA);
+}
+
+static void snd_atmel_ac97_destroy(snd_card_t *card)
+{
+	atmel_ac97_t *chip = get_chip(card);
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	if (chip->irq != -1)
+		free_irq(chip->irq, chip);
+#endif
+	if (chip->regs)
+		iounmap(chip->regs);
+
+	if (chip->mck) {
+		clk_disable(chip->mck);
+		clk_put(chip->mck);
+	}
+
+#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
+        if (chip->dma.req_tx.req.dmac){
+		dma_release_channel(chip->dma.req_tx.req.dmac,
+				    chip->dma.req_tx.req.channel);
+        }
+        if (chip->dma.req_rx.req.dmac) {
+		dma_release_channel(chip->dma.req_rx.req.dmac,
+				    chip->dma.req_rx.req.channel);
+        }
+#endif
+}
+
+static int __devinit snd_atmel_ac97_create(snd_card_t *card,
+					   struct platform_device *pdev)
+{
+	static ac97_bus_ops_t ops = {
+		.write	= snd_atmel_ac97_write,
+		.read	= snd_atmel_ac97_read,
+	};
+	atmel_ac97_t *chip = get_chip(card);
+	struct resource *regs;
+	struct clk *mck;
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	int irq;
+#endif
+        int err;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+#endif
+
+	mck = clk_get(&pdev->dev, "mck");
+	if (IS_ERR(mck))
+		return PTR_ERR(mck);
+	clk_enable(mck);
+	chip->mck = mck;
+
+	card->private_free = snd_atmel_ac97_destroy;
+
+	spin_lock_init(&chip->lock);
+	chip->card = card;
+	chip->pdev = pdev;
+	chip->irq = -1;
+
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	err = request_irq(irq, snd_atmel_ac97_interrupt, 0,
+			  "ac97", chip);
+	if (err) {
+		snd_printk("unable to request IRQ%d\n", irq);
+		return err;
+	}
+	chip->irq = irq;
+#endif
+
+	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!chip->regs)
+		return -ENOMEM;
+
+	snd_card_set_dev(card, &pdev->dev);
+
+	err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
+
+	return err;
+}
+
+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
+{
+	static int dev;
+	snd_card_t *card;
+	atmel_ac97_t *chip;
+	int err;
+        int ch;
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	err = -ENOMEM;
+
+	mutex_init(&opened_mutex);
+
+	card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+			    sizeof(atmel_ac97_t));
+	if (!card)
+		goto out;
+	chip = get_chip(card);
+
+	err = snd_atmel_ac97_create(card, pdev);
+	if (err)
+		goto out_free_card;
+
+	snd_atmel_ac97_reset(chip);
+
+	err = snd_atmel_ac97_mixer_new(chip);
+	if (err)
+		goto out_free_card;
+
+	err = snd_atmel_ac97_pcm_new(chip);
+	if (err)
+		goto out_free_card;
+
+#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	/* TODO: Get this information from the platform device */
+	chip->dma.req_tx.req.dmac = find_dma_controller(0);
+	if (!chip->dma.req_tx.req.dmac) {
+		printk(KERN_ERR
+		       "atmel-ac97c: No DMA controller for TX, aborting\n");
+		goto out_free_card;
+	}
+	chip->dma.req_rx.req.dmac = find_dma_controller(0);
+	if (!chip->dma.req_rx.req.dmac) {
+		snd_printk(KERN_ERR
+		       "atmel-ac97c: No DMA controller available for RX, aborting\n");
+		goto out_free_card;
+	}
+
+	chip->dma.rx_periph_id = 3;
+	chip->dma.tx_periph_id = 4;
+
+	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
+	if (ch < 0) {
+		printk(KERN_ERR
+		       "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n");
+		goto out_free_card;
+	}
+	chip->dma.req_tx.req.channel = ch;
+	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
+	chip->dma.req_tx.req.error = atmel_ac97_error;
+
+	ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
+	if (ch < 0) {
+		snd_printk(KERN_ERR
+		       "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n");
+		goto out_free_card;
+	}
+	chip->dma.req_rx.req.channel = ch;
+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
+	chip->dma.req_rx.req.error = atmel_ac97_error;
+#endif
+
+	strcpy(card->driver, "ac97c");
+	strcpy(card->shortname, "Atmel-AC97");
+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
+	sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, irq %i",
+		chip->regs, chip->irq);
+#else
+	sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i",
+		chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id);
+#endif
+
+	err = snd_card_register(card);
+	if (err)
+		goto out_free_card;
+
+	platform_set_drvdata(pdev, card);
+	dev++;
+	return 0;
+
+out_free_card:
+	snd_card_free(card);
+out:
+	return err;
+}
+
+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
+{
+	snd_card_t *card = platform_get_drvdata(pdev);
+
+	snd_card_free(card);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver atmel_ac97_driver = {
+	.probe		= snd_atmel_ac97_probe,
+	.remove		= __devexit_p(snd_atmel_ac97_remove),
+	.driver		= {
+		.name	= "ac97c",
+	},
+};
+
+static int __init atmel_ac97_init(void)
+{
+	return platform_driver_register(&atmel_ac97_driver);
+}
+
+static void __exit atmel_ac97_exit(void)
+{
+	platform_driver_unregister(&atmel_ac97_driver);
+}
+
+module_init(atmel_ac97_init);
+module_exit(atmel_ac97_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
diff -urN linux-2.6.20.4-0rig/sound/avr32/ac97c.h linux-2.6.20.4-atmel/sound/avr32/ac97c.h
--- linux-2.6.20.4-0rig/sound/avr32/ac97c.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/avr32/ac97c.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,71 @@
+/*
+ * Register definitions for the Atmel AC97 Controller.
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SOUND_AVR32_AC97C_H
+#define __SOUND_AVR32_AC97C_H
+
+#define AC97C_MR		0x08
+#define AC97C_ICA		0x10
+#define AC97C_OCA		0x14
+#define AC97C_CARHR		0x20
+#define AC97C_CATHR		0x24
+#define AC97C_CASR		0x28
+#define AC97C_CAMR		0x2c
+#define AC97C_CBRHR		0x30
+#define AC97C_CBTHR		0x34
+#define AC97C_CBSR		0x38
+#define AC97C_CBMR		0x3c
+#define AC97C_CORHR		0x40
+#define AC97C_COTHR		0x44
+#define AC97C_COSR		0x48
+#define AC97C_COMR		0x4c
+#define AC97C_SR		0x50
+#define AC97C_IER		0x54
+#define AC97C_IDR		0x58
+#define AC97C_IMR		0x5c
+#define AC97C_VERSION		0xfc
+
+#define AC97C_CATPR		PDC_TPR
+#define AC97C_CATCR		PDC_TCR
+#define AC97C_CATNPR		PDC_TNPR
+#define AC97C_CATNCR		PDC_TNCR
+#define AC97C_CARPR		PDC_RPR
+#define AC97C_CARCR		PDC_RCR
+#define AC97C_CARNPR		PDC_RNPR
+#define AC97C_CARNCR		PDC_RNCR
+#define AC97C_PTCR		PDC_PTCR
+
+#define AC97C_MR_ENA		(1 << 0)
+#define AC97C_MR_WRST		(1 << 1)
+#define AC97C_MR_VRA		(1 << 2)
+
+#define AC97C_CSR_TXRDY		(1 << 0)
+#define AC97C_CSR_UNRUN		(1 << 2)
+#define AC97C_CSR_RXRDY		(1 << 4)
+#define AC97C_CSR_ENDTX		(1 << 10)
+#define AC97C_CSR_ENDRX		(1 << 14)
+
+#define AC97C_CMR_SIZE_20	(0 << 16)
+#define AC97C_CMR_SIZE_18	(1 << 16)
+#define AC97C_CMR_SIZE_16	(2 << 16)
+#define AC97C_CMR_SIZE_10	(3 << 16)
+#define AC97C_CMR_CEM_LITTLE	(1 << 18)
+#define AC97C_CMR_CEM_BIG	(0 << 18)
+#define AC97C_CMR_CENA		(1 << 21)
+#define AC97C_CMR_PDCEN		(1 << 22)
+
+#define AC97C_SR_CAEVT		(1 << 3)
+
+#define AC97C_CH_ASSIGN(slot, channel)					\
+	(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
+#define AC97C_CHANNEL_NONE	0x0
+#define AC97C_CHANNEL_A		0x1
+#define AC97C_CHANNEL_B		0x2
+
+#endif /* __SOUND_AVR32_AC97C_H */
diff -urN linux-2.6.20.4-0rig/sound/avr32/at73c213.c linux-2.6.20.4-atmel/sound/avr32/at73c213.c
--- linux-2.6.20.4-0rig/sound/avr32/at73c213.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/avr32/at73c213.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,1295 @@
+/*
+ * Driver for the at73c213 16-bit stereo DAC on Atmel ATSTK1000
+ *
+ * Copyright (C) 2006 Atmel Norway
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this
+ * distribution in the file called COPYING.
+ */
+#undef DEBUG
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/initval.h>
+#include <sound/driver.h>
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#ifndef SND_AT73C213_USE_ALSA_MALLOC_CALLS
+#include <sound/memalloc.h>
+#endif
+
+#include <linux/spi/spi.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "at73c213.h"
+
+/* module parameters */
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+/* Register defines */
+#define PIOA_BASE	0xFFE02800
+#define SSC0_BASE	0xFFE01C00
+#define PM_BASE		0xFFF00000
+
+#define PM_CKSEL	0x04
+#define PM_APBAMASK	0x10
+#define PM_GCCTRL	0x60
+
+#define PIO_PER		0x00
+#define PIO_PDR		0x04
+#define PIO_PUER	0x64
+#define PIO_ASR		0x70
+#define PIO_BSR		0x74
+
+#define SSC_CMR		0x04
+#define SSC_CR		0x00
+#define SSC_TCMR	0x18
+#define SSC_TFMR	0x1C
+
+/* SSC register definitions */
+#define SSC_CR		0x00
+#define SSC_CMR		0x04
+#define SSC_TCMR	0x18
+#define SSC_TFMR	0x1C
+#define SSC_THR		0x24
+#define SSC_SR		0x40
+#define SSC_IER		0x44
+#define SSC_IDR		0x48
+#define SSC_IMR		0x4C
+
+/* SSC fields definitions */
+#define SSC_CR_TXEN	0x00000100
+#define SSC_CR_TXDIS	0x00000200
+#define SSC_CR_SWRST	0x00008000
+
+/* SSC interrupt definitions */
+#define SSC0_IRQ	10
+#define SSC_INT_ENDTX	0x00000004
+#define SSC_INT_TXBUFE	0x00000008
+
+/* PDC register definitions */
+#define PDC_RPR		0x100
+#define PDC_RCR		0x104
+#define PDC_TPR		0x108
+#define PDC_TCR		0x10c
+#define PDC_RNPR	0x110
+#define PDC_RNCR	0x114
+#define PDC_TNPR	0x118
+#define PDC_TNCR	0x11c
+#define PDC_PTCR	0x120
+#define PDC_PTSR	0x124
+
+/* PDC fields definitions */
+#define PDC_PTCR_RXTEN	0x0001
+#define PDC_PTCR_RXTDIS	0x0002
+#define PDC_PTCR_TXTEN	0x0100
+#define PDC_PTCR_TXTDIS 0x0200
+
+static int bitrate;
+static int gclk_div;
+static int ssc_div;
+static int spi = 0;
+static int ssc = 1;
+
+module_param(spi, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(spi, "Which SPI interface to use to communicate with the at73c213");
+module_param(ssc, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(ssc, "Which SSC interface to use to communicate with the at73c213");
+
+/* Initial AT73C213 register values */
+static unsigned char snd_at73c213_original_image[18] =
+{
+	0x00,	/* 00 - CTRL    */
+	0x05,	/* 01 - LLIG    */
+	0x05,	/* 02 - RLIG    */
+	0x08,	/* 03 - LPMG    */
+	0x08,	/* 04 - RPMG    */
+	0x00,	/* 05 - LLOG    */
+	0x00,	/* 06 - RLOG    */
+	0x22,	/* 07 - OLC     */
+	0x09,	/* 08 - MC      */
+	0x00,	/* 09 - CSFC    */
+	0x00,	/* 0A - MISC    */
+	0x00,	/* 0B -         */
+	0x00,	/* 0C - PRECH   */
+	0x05,	/* 0D - AUXG    */
+	0x00,	/* 0E -         */
+	0x00,	/* 0F -         */
+	0x00,	/* 10 - RST     */
+	0x00,	/* 11 - PA_CTRL */
+};
+
+/* chip-specific data */
+struct snd_at73c213 {
+	snd_card_t		*card;
+	snd_pcm_t		*pcm;
+	snd_pcm_substream_t	*substream;
+	int			irq;
+	int			period;
+	void __iomem		*regs;
+	struct clk		*ssc_clk;
+	struct spi_device	*spi;
+	u8			spi_wbuffer[2];
+	u8			spi_rbuffer[2];
+	/* image of the SPI registers in AT73C213 */
+	u8			image[18];
+	spinlock_t		lock;
+	struct platform_device	*pdev;
+};
+
+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
+
+static int
+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
+{
+	struct spi_message msg;
+	struct spi_transfer msg_xfer = {
+		.len		= 2,
+		.cs_change	= 0,
+	};
+
+	spi_message_init(&msg);
+
+	chip->spi_wbuffer[0] = reg;
+	chip->spi_wbuffer[1] = val;
+
+	msg_xfer.tx_buf = chip->spi_wbuffer;
+	msg_xfer.rx_buf = chip->spi_rbuffer;
+	spi_message_add_tail(&msg_xfer, &msg);
+
+	return spi_sync(chip->spi, &msg);
+}
+
+#define write_reg(_spi, reg, val)				\
+	do {							\
+		retval = snd_at73c213_write_reg(_spi, reg, val);	\
+		if (retval)					\
+			goto out;				\
+	} while (0)
+
+static snd_pcm_hardware_t snd_at73c213_playback_hw = {
+	.info		= SNDRV_PCM_INFO_INTERLEAVED |
+			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
+	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
+	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min	= 8000,  /* This will be overwritten with bitrate */
+	.rate_max	= 50000, /* This will be overwritten with bitrate */
+	.channels_min	= 2,
+	.channels_max	= 2,
+	.buffer_bytes_max = 64 * 1024 - 1,
+	.period_bytes_min = 512,
+	.period_bytes_max = 64 * 1024 - 1,
+	.periods_min	= 4,
+	.periods_max	= 1024,
+};
+
+/* calculate and set bitrate and divisions */
+static int snd_at73c213_set_bitrate_and_div(void)
+{
+	extern struct avr32_cpuinfo boot_cpu_data;
+	unsigned long pll0_hz, apba_hz;
+	unsigned long apba_realdiv, gclk_realdiv, ssc_realdiv, wanted_bitrate;
+	char cpusel, ahbsel, apbasel;
+	int regval;
+
+	regval = __raw_readl((void __iomem *)PM_BASE + PM_CKSEL);
+	wanted_bitrate = 48000;
+
+	cpusel = regval & 0x07;
+	ahbsel = (regval>>8) & 0x07;
+	apbasel = (regval>>16) & 0x07;
+
+	/* FIXME: Use the clk framework for this */
+	if ((regval&(1<<7)) != 0) {
+		pll0_hz = clk_get_rate(boot_cpu_data.clk)/(1<<(cpusel+1));
+	} else {
+		pll0_hz = clk_get_rate(boot_cpu_data.clk);
+	}
+
+	if ((regval&(1<<23)) != 0) {
+		apba_hz = pll0_hz/(1<<(apbasel+1));
+		apba_realdiv = (1<<(apbasel+1));
+	} else {
+		apba_hz = pll0_hz;
+		apba_realdiv = 1;
+	}
+
+calculate:
+	/* Adjust bitrate as close as possible to 48000 Hz */
+	gclk_realdiv = pll0_hz/(wanted_bitrate*256);
+	ssc_realdiv = 2 * apba_realdiv * gclk_realdiv;
+
+	if ((gclk_realdiv % 2) == 0)
+		goto setbitrates;
+
+	if(wanted_bitrate >= 22050 && wanted_bitrate <= 48000)
+		wanted_bitrate -= 50;
+	else if (wanted_bitrate < 22050)
+		wanted_bitrate = 48050;
+	else if (wanted_bitrate <= 50000)
+		wanted_bitrate += 50;
+	else {
+		printk(KERN_ERR "at73c213 could not set dividers for a valid bitrate\n");
+		return -EINVAL;
+	}
+
+	goto calculate;
+
+setbitrates:
+	bitrate = pll0_hz/(gclk_realdiv*256);
+	gclk_div = (gclk_realdiv/2)-1;
+	ssc_realdiv = 2*apba_realdiv*gclk_realdiv;
+	ssc_div = ssc_realdiv/(2*apba_realdiv);
+
+	printk(KERN_INFO "at73c213: bitrate is %d Hz\n", bitrate);
+
+	return 0;
+}
+
+/* open callback */
+static int snd_at73c213_pcm_open(snd_pcm_substream_t *substream)
+{
+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+
+	snd_at73c213_playback_hw.rate_min = bitrate;
+	snd_at73c213_playback_hw.rate_max = bitrate;
+	runtime->hw = snd_at73c213_playback_hw;
+	chip->substream = substream;
+
+	return 0;
+}
+
+/* close callback */
+static int snd_at73c213_pcm_close(snd_pcm_substream_t *substream)
+{
+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
+	chip->substream = NULL;
+	return 0;
+}
+
+/* hw_params callback */
+static int snd_at73c213_pcm_hw_params(snd_pcm_substream_t *substream,
+				 snd_pcm_hw_params_t *hw_params)
+{
+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
+	return snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+#else
+	int pg;
+	size_t size = params_buffer_bytes(hw_params);
+	struct snd_pcm_runtime *runtime;
+	struct snd_dma_buffer *dmab = NULL;
+
+	substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
+	snd_assert(substream != NULL, return -EINVAL);
+	runtime = substream->runtime;
+	snd_assert(runtime != NULL, return -EINVAL);
+
+	/* check if buffer is already allocated */
+	if (runtime->dma_buffer_p) {
+		size_t size_previouse;
+		int pg_previouse;
+
+		/* new buffer is smaler than previouse allocated buffer */
+		if (runtime->dma_buffer_p->bytes >= size) {
+			runtime->dma_bytes = size;
+			return 0; /* don't change buffer size */
+		}
+
+		size_previouse = runtime->dma_buffer_p->bytes;
+		pg_previouse = get_order(size_previouse);
+
+		dma_free_coherent(runtime->dma_buffer_p->dev.dev,
+				PAGE_SIZE << pg_previouse,
+				runtime->dma_buffer_p->area,
+				runtime->dma_buffer_p->addr);
+
+		kfree(runtime->dma_buffer_p);
+	}
+
+	dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
+	if (!dmab)
+		return -ENOMEM;
+
+	dmab->dev = substream->dma_buffer.dev;
+	dmab->bytes = 0;
+
+	pg = get_order(size);
+
+	dmab->area = dma_alloc_coherent(
+			substream->dma_buffer.dev.dev,
+			PAGE_SIZE << pg,
+			(dma_addr_t *)&dmab->addr,
+			GFP_KERNEL);
+
+	if (!dmab->area) {
+		kfree(dmab);
+		return -ENOMEM;
+	}
+
+	dmab->bytes = size;
+	snd_pcm_set_runtime_buffer(substream, dmab);
+	runtime->dma_bytes = size;
+	return 1;
+#endif
+}
+
+/* hw_free callback */
+static int snd_at73c213_pcm_hw_free(snd_pcm_substream_t *substream)
+{
+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
+	return snd_pcm_lib_free_pages(substream);
+#else
+	int pg;
+	struct snd_pcm_runtime *runtime;
+	struct snd_dma_buffer *dmab = NULL;
+
+	snd_assert(substream != NULL, return -EINVAL);
+	runtime = substream->runtime;
+	snd_assert(runtime != NULL, return -EINVAL);
+	dmab = runtime->dma_buffer_p;
+
+	if (!dmab)
+		return 0;
+
+	if (!dmab->area)
+		return 0;
+
+	pg = get_order(dmab->bytes);
+	dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
+	kfree(runtime->dma_buffer_p);
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+#endif
+}
+
+/* prepare callback */
+static int snd_at73c213_pcm_prepare(snd_pcm_substream_t *substream)
+{
+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
+	struct platform_device *pdev = chip->pdev;
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	int block_size;
+
+	block_size = frames_to_bytes(runtime, runtime->period_size);
+
+	chip->period = 0;
+
+	/* Make sure that our data are actually readable by the SSC */
+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
+			block_size, DMA_TO_DEVICE);
+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr + block_size,
+			block_size, DMA_TO_DEVICE);
+
+	__raw_writel(runtime->dma_addr, chip->regs + PDC_TPR);
+	__raw_writel(runtime->period_size * 2, chip->regs + PDC_TCR);
+	__raw_writel(runtime->dma_addr + block_size, chip->regs + PDC_TNPR);
+	__raw_writel(runtime->period_size * 2, chip->regs + PDC_TNCR);
+
+	return 0;
+}
+
+/* trigger callback */
+static int snd_at73c213_pcm_trigger(snd_pcm_substream_t *substream,
+				   int cmd)
+{
+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
+	int retval = 0;
+	int flags = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		__raw_writel(SSC_INT_ENDTX, chip->regs + SSC_IER);
+		__raw_writel(PDC_PTCR_TXTEN, chip->regs + PDC_PTCR);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		__raw_writel(PDC_PTCR_TXTDIS, chip->regs + PDC_PTCR);
+		__raw_writel(SSC_INT_ENDTX, chip->regs + SSC_IDR);
+		break;
+	default:
+		printk(KERN_WARNING "at73c213: spuriouse command %x\n", cmd);
+		retval = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return retval;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t snd_at73c213_pcm_pointer(snd_pcm_substream_t *substream)
+{
+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	snd_pcm_uframes_t pos;
+	unsigned long bytes;
+
+	bytes = __raw_readl(chip->regs + PDC_TPR) - runtime->dma_addr;
+
+	pos = bytes_to_frames(runtime, bytes);
+	if (pos >= runtime->buffer_size)
+		pos -= runtime->buffer_size;
+
+	return pos;
+}
+
+/* operators */
+static snd_pcm_ops_t at73c213_playback_ops = {
+	.open		= snd_at73c213_pcm_open,
+	.close		= snd_at73c213_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= snd_at73c213_pcm_hw_params,
+	.hw_free	= snd_at73c213_pcm_hw_free,
+	.prepare	= snd_at73c213_pcm_prepare,
+	.trigger	= snd_at73c213_pcm_trigger,
+	.pointer	= snd_at73c213_pcm_pointer,
+};
+
+/* free a pcm device */
+static void snd_at73c213_pcm_free(snd_pcm_t *pcm)
+{
+	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
+	if (chip->pcm != 0 ) {
+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
+		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
+#endif
+		chip->pcm = NULL;
+	}
+}
+
+/* create a new pcm device */
+static int __devinit snd_at73c213_new_pcm(struct snd_at73c213 *chip, int device)
+{
+	snd_pcm_t *pcm;
+	int retval;
+
+	retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm);
+	if (retval < 0)
+		return retval;
+
+	pcm->private_data = chip;
+	pcm->private_free = snd_at73c213_pcm_free;
+	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
+	strcpy(pcm->name, "at73c213");
+	chip->pcm = pcm;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
+
+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
+	snd_pcm_lib_preallocate_pages_for_all(chip->pcm, SNDRV_DMA_TYPE_DEV,
+			&chip->pdev->dev, 64 * 1024, 64 * 1024);
+#endif
+
+	return 0;
+}
+
+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
+{
+	struct snd_at73c213 *chip = dev_id;
+	struct platform_device *pdev = chip->pdev;
+	snd_pcm_runtime_t *runtime = chip->substream->runtime;
+	u32 status;
+	int offset, next_period, block_size;
+
+	spin_lock(&chip->lock);
+
+	block_size = frames_to_bytes(runtime, runtime->period_size);
+
+	status = __raw_readl(chip->regs + SSC_IMR);
+
+	if (status & SSC_INT_ENDTX) {
+		chip->period++;
+		if (chip->period == runtime->periods)
+			chip->period = 0;
+		next_period = chip->period + 1;
+		if (next_period == runtime->periods)
+			next_period = 0;
+
+		offset = block_size * next_period;
+
+		/* Make sure that our data are actually readable by the SSC */
+		dma_sync_single_for_device(&pdev->dev, runtime->dma_addr + offset,
+				block_size, DMA_TO_DEVICE);
+		__raw_writel(runtime->dma_addr + offset, chip->regs + PDC_TNPR);
+		__raw_writel(runtime->period_size * 2, chip->regs + PDC_TNCR);
+
+		if (next_period == 0) {
+			(void)__raw_readl(chip->regs + PDC_TPR);
+			(void)__raw_readl(chip->regs + PDC_TCR);
+		}
+	} else {
+		printk(KERN_WARNING
+		       "Spurious SSC interrupt, status = 0x%08lx\n",
+		       (unsigned long)status);
+		__raw_writel(status, chip->regs + SSC_IDR);
+	}
+
+	(void)__raw_readl(chip->regs + SSC_IMR);
+	spin_unlock(&chip->lock);
+
+	if (status & SSC_INT_ENDTX)
+		snd_pcm_period_elapsed(chip->substream);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Mixer functions
+ */
+#if 0 /* Function not in use */
+static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	unsigned long mask = (kcontrol->private_value >> 16) & 0xff;
+
+	uinfo->type = (mask == 1) ?
+		SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = mask;
+
+	return 0;
+}
+#endif
+
+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int reg = kcontrol->private_value & 0xff;
+	int shift = (kcontrol->private_value >> 8) & 0xff;
+	int mask = (kcontrol->private_value >> 16) & 0xff;
+	int invert = (kcontrol->private_value >> 24) & 0xff;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask;
+
+	if (invert)
+		ucontrol->value.integer.value[0] =
+			(mask - ucontrol->value.integer.value[0]);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int reg = kcontrol->private_value & 0xff;
+	int shift = (kcontrol->private_value >> 8) & 0xff;
+	int mask = (kcontrol->private_value >> 16) & 0xff;
+	int invert = (kcontrol->private_value >> 24) & 0xff;
+	int change, retval;
+	unsigned short val;
+
+	val = (ucontrol->value.integer.value[0] & mask);
+	if (invert)
+		val = mask - val;
+	val <<= shift;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	val = (chip->image[reg] & ~(mask << shift)) | val;
+	change = val != chip->image[reg];
+	write_reg(chip, reg, val);
+
+	chip->image[reg] = val;
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return change;
+
+out:
+	return retval;
+}
+
+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	int mask = (kcontrol->private_value >> 24) & 0xFF;
+
+	uinfo->type = mask == 1 ?
+		SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = mask;
+
+	return 0;
+}
+
+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int left_reg = kcontrol->private_value & 0xff;
+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
+	int mask = (kcontrol->private_value >> 24) & 0xff;
+	int invert = (kcontrol->private_value >> 22) & 1;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	ucontrol->value.integer.value[0] =
+		(chip->image[left_reg] >> shift_left) & mask;
+	ucontrol->value.integer.value[1] =
+		(chip->image[right_reg] >> shift_right) & mask;
+
+	if (invert) {
+		ucontrol->value.integer.value[0] =
+			(mask - ucontrol->value.integer.value[0]);
+		ucontrol->value.integer.value[1] =
+			(mask - ucontrol->value.integer.value[1]);
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int left_reg = kcontrol->private_value & 0xff;
+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
+	int mask = (kcontrol->private_value >> 24) & 0xff;
+	int invert = (kcontrol->private_value >> 22) & 1;
+	int change, retval;
+	unsigned short val1, val2;
+
+	val1 = ucontrol->value.integer.value[0] & mask;
+	val2 = ucontrol->value.integer.value[1] & mask;
+	if (invert) {
+		val1 = mask - val1;
+		val2 = mask - val2;
+	}
+	val1 <<= shift_left;
+	val2 <<= shift_right;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1;
+	val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2;
+	change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg];
+	write_reg(chip, left_reg, val1);
+	write_reg(chip, right_reg, val2);
+
+	chip->image[left_reg] = val1;
+	chip->image[right_reg] = val2;
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return change;
+
+out:
+	return retval;
+}
+
+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+
+	return 0;
+}
+
+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int reg = kcontrol->private_value & 0xff;
+	int shift = (kcontrol->private_value >> 8) & 0xff;
+	int invert = (kcontrol->private_value >> 24) & 0xff;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01;
+
+	if (invert)
+		ucontrol->value.integer.value[0] =
+			(0x01 - ucontrol->value.integer.value[0]);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int reg = kcontrol->private_value & 0xff;
+	int shift = (kcontrol->private_value >> 8) & 0xff;
+	int mask = (kcontrol->private_value >> 16) & 0xff;
+	int invert = (kcontrol->private_value >> 24) & 0xff;
+	int change, retval;
+	unsigned short val;
+
+	if (ucontrol->value.integer.value[0])
+		val = mask;
+	else
+		val = 0;
+
+	if (invert)
+		val = mask - val;
+	val <<= shift;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	val |= (chip->image[reg] & ~(mask << shift));
+	change = val != chip->image[reg];
+
+	write_reg(chip, reg, val);
+
+	chip->image[reg] = val;
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return change;
+
+out:
+	return retval;
+}
+
+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1;
+
+	return 0;
+}
+
+static int snd_at73c213_line_capture_volume_info(
+		struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 14;
+	uinfo->value.integer.max = 31;
+
+	return 0;
+}
+
+static int snd_at73c213_aux_capture_volume_info(
+		struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 14;
+	uinfo->value.integer.max = 31;
+
+	return 0;
+}
+
+#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .info = snd_at73c213_mono_info, \
+  .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \
+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
+
+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .info = snd_at73c213_mono_switch_info, \
+  .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \
+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
+
+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .info = snd_at73c213_stereo_info, \
+  .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \
+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
+
+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1),
+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1),
+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
+{
+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name	= "PA Playback Volume",
+	.index	= 0,
+	.info	= snd_at73c213_pa_volume_info,
+	.get	= snd_at73c213_mono_get,
+	.put	= snd_at73c213_mono_put,
+	.private_value	= PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24),
+},
+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
+{
+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name	= "Aux Capture Volume",
+	.index	= 0,
+	.info	= snd_at73c213_aux_capture_volume_info,
+	.get	= snd_at73c213_mono_get,
+	.put	= snd_at73c213_mono_put,
+	.private_value	= DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24),
+},
+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
+{
+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name	= "Line Capture Volume",
+	.index	= 0,
+	.info	= snd_at73c213_line_capture_volume_info,
+	.get	= snd_at73c213_stereo_get,
+	.put	= snd_at73c213_stereo_put,
+	.private_value	= DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22),
+},
+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
+};
+
+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
+{
+	struct snd_card *card;
+	int errval, idx;
+
+	if (chip == NULL || chip->pcm == NULL)
+		return -EINVAL;
+
+	card = chip->card;
+
+	strcpy(card->mixername, chip->pcm->name);
+
+	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
+		if ((errval = snd_ctl_add(card,
+				       snd_ctl_new1(&snd_at73c213_controls[idx],
+						    chip))) < 0)
+			return errval;
+	}
+
+	return 0;
+}
+
+/*
+ * Device functions
+ */
+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
+{
+	int retval;
+	unsigned char dac_ctrl = 0;
+
+	/* XXX: Unmask the APB clock for SSC0 */
+	__raw_writel(__raw_readl((void __iomem *)PM_BASE + PM_APBAMASK)|(1<<7),
+			(void __iomem *)PM_BASE + PM_APBAMASK);
+
+	/* Wait for clock to be stable */
+	msleep(10);
+
+	retval = snd_at73c213_set_bitrate_and_div();
+	if (retval)
+		goto out;
+
+	/* Reset the SSC */
+	__raw_writel(SSC_CR_SWRST, chip->regs + SSC_CR);
+
+	/* Enable GCLK0 */
+	__raw_writel((1<<30), (void __iomem *)(PIOA_BASE + PIO_PDR));
+	__raw_writel((1<<30), (void __iomem *)(PIOA_BASE + PIO_ASR));
+	__raw_writel(((gclk_div<<8)|0x10|0x04|0x02), (void __iomem *)(PM_BASE + PM_GCCTRL));
+
+	/* Enable SSC and setup for I2S */
+	__raw_writel(ssc_div, chip->regs + SSC_CMR);
+
+	/* CKO, START, STTDLY, PERIOD */
+	__raw_writel((1<<2)|(4<<8)|(1<<16)|(15<<24), chip->regs + SSC_TCMR);
+
+	/* DATLEN, MSBF, DATNB, FSLEN, FSOS */
+	__raw_writel((15<<0)|(1<<7)|(1<<8)|(15<<16)|(1<<20), chip->regs + SSC_TFMR);
+
+	/* Initialize at73c213 on SPI bus */
+	/* Reset the device */
+	write_reg(chip, DAC_RST, 0x04);
+	msleep(1);
+	write_reg(chip, DAC_RST, 0x03);
+
+	/* Turn on precharge */
+	write_reg(chip, DAC_PRECH, 0xFF);
+	write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
+	write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR));
+
+	msleep(50);
+
+	/* Stop precharging PA */
+	write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
+	chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
+
+	msleep(450);
+
+	/* Stop precharging, turn on master power */
+	write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
+	chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR);
+
+	msleep(1);
+
+	/* Turn on DAC */
+	dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)|
+			(1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR);
+
+	write_reg(chip, DAC_CTRL, dac_ctrl);
+	chip->image[DAC_CTRL] = dac_ctrl;
+
+	/* Mute sound */
+	write_reg(chip, DAC_LMPG, 0x3F);
+	chip->image[DAC_LMPG] = 0x3F;
+	write_reg(chip, DAC_RMPG, 0x3F);
+	chip->image[DAC_RMPG] = 0x3F;
+	write_reg(chip, DAC_LLOG, 0x3F);
+	chip->image[DAC_LLOG] = 0x3F;
+	write_reg(chip, DAC_RLOG, 0x3F);
+	chip->image[DAC_RLOG] = 0x3F;
+	write_reg(chip, DAC_LLIG, 0x11);
+	chip->image[DAC_LLIG] = 0x11;
+	write_reg(chip, DAC_RLIG, 0x11);
+	chip->image[DAC_RLIG] = 0x11;
+	write_reg(chip, DAC_AUXG, 0x11);
+	chip->image[DAC_AUXG] = 0x11;
+
+	/* Turn on SSC transmitter */
+	__raw_writel(SSC_CR_TXEN, chip->regs + SSC_CR);
+
+out:
+	return retval;
+}
+
+static int snd_at73c213_dev_free(snd_device_t *device)
+{
+	struct snd_at73c213 *chip = device->device_data;
+
+	if (chip->regs) {
+		__raw_writel(SSC_CR_TXDIS, chip->regs + SSC_CR);
+		iounmap(chip->regs);
+	}
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, chip);
+
+	if (chip->ssc_clk) {
+		clk_disable(chip->ssc_clk);
+		clk_put(chip->ssc_clk);
+	}
+
+	return 0;
+}
+
+static int __devinit snd_at73c213_create(snd_card_t *card,
+					 struct platform_device *pdev)
+{
+	static snd_device_ops_t ops = {
+		.dev_free	= snd_at73c213_dev_free,
+	};
+	struct snd_at73c213 *chip = get_chip(card);
+	struct resource *regs;
+	struct clk *ssc_clk;
+	int irq, retval;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ssc_clk = clk_get(&pdev->dev, "mck");
+	if (IS_ERR(ssc_clk))
+		return PTR_ERR(ssc_clk);
+	clk_enable(ssc_clk);
+	chip->ssc_clk = ssc_clk;
+
+	spin_lock_init(&chip->lock);
+	chip->card = card;
+	chip->pdev = pdev;
+	chip->irq = -1;
+
+	retval = -ENOMEM;
+
+	retval = spi_setup(chip->spi);
+	if (retval)
+		goto out;
+
+	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!chip->regs)
+		goto out;
+
+	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
+	if (retval) {
+		snd_printk("unable to request IRQ%d\n", irq);
+		goto out;
+	}
+	chip->irq = irq;
+
+	memcpy(&chip->image, &snd_at73c213_original_image,
+			sizeof(snd_at73c213_original_image));
+
+	retval = snd_at73c213_chip_init(chip);
+	if (retval)
+		goto out;
+
+	retval = snd_at73c213_new_pcm(chip, 0);
+	if (retval)
+		goto out;
+
+	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (retval)
+		goto out;
+
+	retval = snd_at73c213_mixer(chip);
+	if (retval)
+		goto out;
+
+	snd_card_set_dev(card, &pdev->dev);
+
+out:
+	return retval;
+}
+
+static int __devinit snd_at73c213_probe(struct platform_device *pdev)
+{
+	static int dev;
+	struct spi_board_info *binfo;
+	struct spi_master *smaster;
+	struct snd_at73c213 *chip;
+	snd_card_t *card;
+	int retval;
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	if (spi < 0 || ssc < 0)
+		return -ENODEV;
+
+	retval = -ENOMEM;
+	card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+			    sizeof(struct snd_at73c213));
+	if (!card)
+		goto out;
+
+	chip = card->private_data;
+
+	retval = -ENODEV;
+
+	/* Get the SPI bus */
+	binfo = pdev->dev.platform_data;
+	if (!binfo) {
+		printk(KERN_WARNING "at73c213: could not get platform data\n");
+		goto out;
+	}
+
+	smaster = spi_busnum_to_master(spi);
+	if (!smaster) {
+		request_module("spi1");
+		smaster = spi_busnum_to_master(spi);
+		if (!smaster) {
+			printk(KERN_WARNING
+					"at73c213: could not get "
+					"SPI bus %d, remembered to load "
+					"the spi_atmel module?\n", spi);
+			goto out;
+		}
+	}
+
+	chip->spi = spi_new_device(smaster, binfo);
+	if (!chip->spi) {
+		printk(KERN_WARNING "at73c213: could not get SPI device %d\n", spi);
+		goto out;
+	}
+
+	chip->spi->mode = SPI_MODE_1;
+	chip->spi->bits_per_word = 8;
+
+	retval = snd_at73c213_create(card, pdev);
+	if (retval)
+		goto out_free_card;
+
+	strcpy(card->driver, "at73c213");
+	strcpy(card->shortname, "at73c213 (AVR32 STK1000)");
+	sprintf(card->longname, "%s at %p (irq %i)", card->shortname, chip->regs, chip->irq);
+
+	retval = snd_card_register(card);
+	if (retval)
+		goto out_free_card;
+
+	platform_set_drvdata(pdev, card);
+	dev++;
+	return 0;
+
+out_free_card:
+	snd_card_free(card);
+out:
+	return retval;
+}
+
+static int __devexit snd_at73c213_remove(struct platform_device *pdev)
+{
+	struct snd_card *card = platform_get_drvdata(pdev);
+	struct snd_at73c213 *chip = card->private_data;
+	int retval;
+
+	/* Stop playback */
+	__raw_writel(SSC_CR_TXDIS, chip->regs + SSC_CR);
+
+	/* Stop GLCK0 */
+	__raw_writel(0, (void __iomem *)PM_BASE + PM_GCCTRL);
+
+	/* Mute sound */
+	write_reg(chip, DAC_LMPG, 0x3F);
+	chip->image[DAC_LMPG] = 0x3F;
+	write_reg(chip, DAC_RMPG, 0x3F);
+	chip->image[DAC_RMPG] = 0x3F;
+	write_reg(chip, DAC_LLOG, 0x3F);
+	chip->image[DAC_LLOG] = 0x3F;
+	write_reg(chip, DAC_RLOG, 0x3F);
+	chip->image[DAC_RLOG] = 0x3F;
+	write_reg(chip, DAC_LLIG, 0x11);
+	chip->image[DAC_LLIG] = 0x11;
+	write_reg(chip, DAC_RLIG, 0x11);
+	chip->image[DAC_RLIG] = 0x11;
+	write_reg(chip, DAC_AUXG, 0x11);
+	chip->image[DAC_AUXG] = 0x11;
+
+	/* Turn off PA */
+	write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F));
+	chip->image[PA_CTRL] |= 0x0F;
+	msleep(10);
+	write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
+	chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
+
+	/* Turn off external DAC */
+	write_reg(chip, DAC_CTRL, 0x0C);
+	chip->image[DAC_CTRL] = 0x0C;
+	msleep(2);
+	write_reg(chip, DAC_CTRL, 0x00);
+	chip->image[DAC_CTRL] = 0x00;
+
+	/* Turn off master power */
+	write_reg(chip, DAC_PRECH, 0x00);
+	chip->image[DAC_PRECH] = 0x00;
+
+	msleep(10);
+
+out:
+	if (chip->spi)
+		spi_unregister_device(chip->spi);
+
+	if (card) {
+		snd_card_free(card);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int snd_at73c213_suspend(struct platform_device *pdev, pm_message_t state, u32 level)
+{
+	struct snd_card *card = at32_get_drvdata(pdev);
+	struct snd_at73c213 *chip = card->private_data;
+
+	printk(KERN_DEBUG "at73c213: suspending\n");
+
+	/* Stop SSC and GCLK0 */
+
+	spi_suspend(chip->spi, state);
+
+	return 0;
+}
+
+static int snd_at73c213_resume(struct platform_device *pdev, u32 level)
+{
+	struct snd_card *card = at32_get_drvdata(pdev);
+	struct snd_at73c213 *chip = card->private_data;
+
+	printk(KERN_DEBUG "at73c213: resuming\n");
+
+	/* Start GLCK0 and SSC */
+
+	spi_resume(chip->spi);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+/* Driver core initialization */
+static struct platform_driver at73c213_driver = {
+	.probe		= snd_at73c213_probe,
+	.remove		= __devexit_p(snd_at73c213_remove),
+	.driver		= {
+		.name	= "at73c213",
+	}
+#ifdef CONFIG_PM
+	.resume		= snd_at73c213_resume,
+	.suspend	= snd_at73c213_suspend,
+#endif
+};
+
+static int __init at73c213_init(void)
+{
+	return platform_driver_register(&at73c213_driver);
+}
+
+static void __exit at73c213_exit(void)
+{
+	platform_driver_unregister(&at73c213_driver);
+}
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_DESCRIPTION("Sound driver for at73c213 on STK1000");
+MODULE_LICENSE("GPL");
+
+module_init(at73c213_init);
+module_exit(at73c213_exit);
+
diff -urN linux-2.6.20.4-0rig/sound/avr32/at73c213.h linux-2.6.20.4-atmel/sound/avr32/at73c213.h
--- linux-2.6.20.4-0rig/sound/avr32/at73c213.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/avr32/at73c213.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,120 @@
+/*
+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
+ *
+ * Copyright (C) 2006 Atmel Norway
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this
+ * distribution in the file called COPYING.
+ */
+
+#ifndef _SND_AT73C213_MIXER_H_
+#define _SND_AT73C213_MIXER_H_
+
+/* DAC control register */
+#define DAC_CTRL		0x00
+#define DAC_CTRL_ONPADRV	7
+#define DAC_CTRL_ONAUXIN	6
+#define DAC_CTRL_ONDACR		5
+#define DAC_CTRL_ONDACL		4
+#define DAC_CTRL_ONLNOR		3
+#define DAC_CTRL_ONLNOL		2
+#define DAC_CTRL_ONLNIR		1
+#define DAC_CTRL_ONLNIL		0
+
+/* DAC left line in gain register */
+#define DAC_LLIG		0x01
+#define DAC_LLIG_LLIG		0
+
+/* DAC right line in gain register */
+#define DAC_RLIG		0x02
+#define DAC_RLIG_RLIG		0
+
+/* DAC Left Master Playback Gain Register */
+#define DAC_LMPG		0x03
+#define DAC_LMPG_LMPG		0
+
+/* DAC Right Master Playback Gain Register */
+#define DAC_RMPG		0x04
+#define DAC_RMPG_RMPG		0
+
+/* DAC Left Line Out Gain Register */
+#define DAC_LLOG		0x05
+#define DAC_LLOG_LLOG		0
+
+/* DAC Right Line Out Gain Register */
+#define DAC_RLOG		0x06
+#define DAC_RLOG_RLOG		0
+
+/* DAC Output Level Control Register */
+#define DAC_OLC			0x07
+#define DAC_OLC_RSHORT		7
+#define DAC_OLC_ROLC		4
+#define DAC_OLC_LSHORT		3
+#define DAC_OLC_LOLC		0
+
+/* DAC Mixer Control Register */
+#define DAC_MC			0x08
+#define DAC_MC_INVR		5
+#define DAC_MC_INVL		4
+#define DAC_MC_RMSMIN2		3
+#define DAC_MC_RMSMIN1		2
+#define DAC_MC_LMSMIN2		1
+#define DAC_MC_LMSMIN1		0
+
+/* DAC Clock and Sampling Frequency Control Register */
+#define DAC_CSFC		0x09
+#define DAC_CSFC_OVRSEL		4
+
+/* DAC Miscellaneous Register */
+#define DAC_MISC		0x0A
+#define DAC_MISC_VCMCAPSEL	7
+#define DAC_MISC_DINTSEL	4
+#define DAC_MISC_DITHEN		3
+#define DAC_MISC_DEEMPEN	2
+#define DAC_MISC_NBITS		0
+
+/* DAC Precharge Control Register */
+#define DAC_PRECH		0x0C
+#define DAC_PRECH_PRCHGPDRV	7
+#define DAC_PRECH_PRCHGAUX1	6
+#define DAC_PRECH_PRCHGLNOR	5
+#define DAC_PRECH_PRCHGLNOL	4
+#define DAC_PRECH_PRCHGLNIR	3
+#define DAC_PRECH_PRCHGLNIL	2
+#define DAC_PRECH_PRCHG		1
+#define DAC_PRECH_ONMSTR	0
+
+/* DAC Auxiliary Input Gain Control Register */
+#define DAC_AUXG		0x0D
+#define DAC_AUXG_AUXG		0
+
+/* DAC Reset Register */
+#define DAC_RST			0x10
+#define DAC_RST_RESMASK		2
+#define DAC_RST_RESFILZ		1
+#define DAC_RST_RSTZ		0
+
+/* Power Amplifier Control Register */
+#define PA_CTRL			0x11
+#define PA_CTRL_APAON		6
+#define PA_CTRL_APAPRECH	5
+#define PA_CTRL_APALP		4
+#define PA_CTRL_APAGAIN		0
+
+#endif
+
diff -urN linux-2.6.20.4-0rig/sound/avr32/Kconfig linux-2.6.20.4-atmel/sound/avr32/Kconfig
--- linux-2.6.20.4-0rig/sound/avr32/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/avr32/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,51 @@
+# ALSA AVR32 drivers
+
+menu "ALSA AVR32 devices"
+	depends on SND != n && AVR32
+
+config SND_ATMEL_AC97
+	tristate "Atmel AC97 Controller Driver"
+	depends on SND
+	select SND_PCM
+	select SND_AC97_CODEC
+	help
+	  ALSA sound driver for the Atmel AC97 controller.
+
+config SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
+	bool "Use the built-in malloc calls in the alsa driver"
+	default n
+	depends on SND_ATMEL_AC97
+	help
+	  Say Y if the built-in malloc calls in the alsa driver should be
+	  used instead of the native dma_alloc_coherent and dma_free_coherent
+	  function calls. Enabling this feature may break the rmmod feature.
+
+config SND_ATMEL_AC97C_USE_PDC
+	bool "Use PDC for DMA transfers to/from the Atmel AC97 Controller"
+	default n
+	depends on SND_ATMEL_AC97
+	help
+	  Say Y if PDC (Peripheral DMA Controller) is used for DMA transfers
+	  to/from the Atmel AC97C instead of using the generic DMA framework.
+
+config SND_AT73C213
+	tristate "Atmel AT73C213 DAC driver"
+	depends on SND && SPI_ATMEL
+	select SND_PCM
+	help
+	  Say Y here if you want to use the Atmel AT73C213 external
+	  DAC on the ATSTK1000 development board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called snd-at73c213.
+
+config SND_AT73C213_USE_ALSA_MALLOC_CALLS
+	bool "Use the built-in malloc calls in the alsa driver"
+	default n
+	depends on SND_AT73C213
+	help
+	  Say Y if the built-in malloc calls in the alsa driver should be
+	  used instead of the native dma_alloc_coherent and dma_free_coherent
+	  function calls. Enabling this feature may brake the rmmod feature.
+
+endmenu
diff -urN linux-2.6.20.4-0rig/sound/avr32/Makefile linux-2.6.20.4-atmel/sound/avr32/Makefile
--- linux-2.6.20.4-0rig/sound/avr32/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/avr32/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,9 @@
+#
+# Makefile for ALSA
+#
+
+snd-atmel-ac97-objs		:= ac97c.o
+obj-$(CONFIG_SND_ATMEL_AC97)	+= snd-atmel-ac97.o
+
+snd-at73c213-objs		:= at73c213.o
+obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
diff -urN linux-2.6.20.4-0rig/sound/Kconfig linux-2.6.20.4-atmel/sound/Kconfig
--- linux-2.6.20.4-0rig/sound/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -62,6 +62,8 @@
 
 source "sound/arm/Kconfig"
 
+source "sound/avr32/Kconfig"
+
 source "sound/mips/Kconfig"
 
 # the following will depend on the order of config.
diff -urN linux-2.6.20.4-0rig/sound/Makefile linux-2.6.20.4-atmel/sound/Makefile
--- linux-2.6.20.4-0rig/sound/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -6,6 +6,7 @@
 obj-$(CONFIG_SOUND_PRIME) += oss/
 obj-$(CONFIG_DMASOUND) += oss/
 obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/
+obj-$(CONFIG_SND) += avr32/
 obj-$(CONFIG_SND_AOA) += aoa/
 
 # This one must be compilable even if sound is configured out
diff -urN linux-2.6.20.4-0rig/sound/oss/at32dac.c linux-2.6.20.4-atmel/sound/oss/at32dac.c
--- linux-2.6.20.4-0rig/sound/oss/at32dac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/oss/at32dac.c	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,720 @@
+/*
+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sound.h>
+#include <linux/soundcard.h>
+
+#include <asm/byteorder.h>
+#include <asm/dma-controller.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
+#include <linux/byteorder/swabb.h>
+
+#include "at32dac.h"
+
+#define DMA_BUFFER_SIZE	32768
+#define DMA_PERIOD_SHIFT 10
+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
+
+struct sound_settings {
+	unsigned int format;
+	unsigned int channels;
+	unsigned int sample_rate;
+	/* log2(bytes per sample) */
+	unsigned int input_order;
+};
+
+struct at32_dac {
+	spinlock_t lock;
+	void __iomem *regs;
+
+	/* head and tail refer to number of words */
+	struct {
+		u32 *buf;
+		int head;
+		int tail;
+	} dma;
+
+	struct semaphore sem;
+	wait_queue_head_t write_wait;
+
+	/*
+	 * Read at most ucount bytes from ubuf, translate to 2-channel
+	 * signed 16-bit big endian format and write to the DMA buffer
+	 * as long as there is room left.  Return the number of bytes
+	 * successfully copied from ubuf, or -EFAULT if the first
+	 * sample from ubuf couldn't be read.  This function is not
+	 * called unless there is room for at least one sample (4
+	 * bytes) in the DMA buffer.
+	 */
+	ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
+			 size_t ucount);
+
+	struct sound_settings dsp_settings;
+	struct dma_request_cyclic req;
+
+	struct clk *mck;
+	struct clk *sample_clk;
+	struct platform_device *pdev;
+	int busy;
+	int playing;
+	int dev_dsp;
+};
+static struct at32_dac *the_dac;
+
+static inline unsigned int at32dac_get_head(struct at32_dac *dac)
+{
+	return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
+}
+
+static inline unsigned int at32dac_get_tail(struct at32_dac *dac)
+{
+	return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
+}
+
+static inline unsigned int at32dac_dma_space(struct at32_dac *dac)
+{
+	unsigned int space;
+
+	space = ((dac->dma.tail - dac->dma.head - 1)
+		 & ((DMA_BUFFER_SIZE / 4) - 1));
+	return space;
+}
+
+static void at32dac_update_dma_tail(struct at32_dac *dac)
+{
+	dma_addr_t dma_addr;
+	unsigned int new_tail;
+
+	if (dac->playing) {
+		dma_addr = dma_get_current_pos(dac->req.req.dmac,
+					       dac->req.req.channel);
+		new_tail = (dma_addr - dac->req.buffer_start) / 4;
+		if (new_tail >= dac->dma.head
+		    && (dac->dma.tail < dac->dma.head
+			|| dac->dma.tail > new_tail))
+			printk(KERN_NOTICE "at32dac: underrun\n");
+		dac->dma.tail = new_tail;
+		pr_debug("update tail: 0x%x - 0x%x = %u\n",
+			 dma_addr, dac->req.buffer_start, dac->dma.tail);
+	}
+}
+
+static int at32dac_start(struct at32_dac *dac)
+{
+	int ret;
+
+	if (dac->playing)
+		return 0;
+
+	memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
+
+	clk_enable(dac->sample_clk);
+
+	ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
+	if (ret)
+		goto out_stop_clock;
+
+	pr_debug("Starting DMA...\n");
+	ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
+	if (ret)
+		goto out_stop_request;
+
+	dac_writel(dac, CTRL, DAC_BIT(EN));
+	dac->playing = 1;
+
+	return 0;
+
+out_stop_request:
+	dma_stop_request(dac->req.req.dmac,
+			 dac->req.req.channel);
+out_stop_clock:
+	clk_disable(dac->sample_clk);
+	return ret;
+}
+
+static int at32dac_stop(struct at32_dac *dac)
+{
+	if (dac->playing) {
+		dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
+		dac_writel(dac, DATA, 0);
+		dac_writel(dac, CTRL, 0);
+		dac->playing = 0;
+		clk_disable(dac->sample_clk);
+	}
+
+	return 0;
+}
+
+static int at32dac_dma_prepare(struct at32_dac *dac)
+{
+	dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
+					  &dac->req.buffer_start, GFP_KERNEL);
+	if (!dac->dma.buf)
+		return -ENOMEM;
+
+	dac->dma.head = dac->dma.tail = 0;
+	dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
+	dac->req.buffer_size = DMA_BUFFER_SIZE;
+
+	return 0;
+}
+
+static void at32dac_dma_cleanup(struct at32_dac *dac)
+{
+	if (dac->dma.buf)
+		dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
+				  dac->dma.buf, dac->req.buffer_start);
+	dac->dma.buf = NULL;
+}
+
+static void at32dac_dma_block_complete(struct dma_request *req)
+{
+	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
+	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
+	wake_up(&dac->write_wait);
+}
+
+static void at32dac_dma_error(struct dma_request *req)
+{
+	printk(KERN_ERR "at32dac: DMA error\n");
+}
+
+static irqreturn_t at32dac_interrupt(int irq, void *dev_id)
+{
+	struct at32_dac *dac = dev_id;
+	u32 status;
+
+	status = dac_readl(dac, INT_STATUS);
+	if (status & DAC_BIT(UNDERRUN)) {
+		printk(KERN_ERR "at32dac: Underrun detected\n");
+		dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
+	} else {
+		printk(KERN_ERR "at32dac: Spurious interrupt: status=0x%x\n",
+		       status);
+		dac_writel(dac, INT_CLR, status);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
+			   size_t ucount)
+{
+	ssize_t ret;
+
+	if (dac->dsp_settings.channels == 2) {
+		const u32 __user *up = (const u32 __user *)ubuf;
+		u32 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
+			if (!at32dac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			dac->dma.buf[at32dac_get_head(dac)] = sample;
+			dac->dma.head++;
+		}
+	} else {
+		const u16 __user *up = (const u16 __user *)ubuf;
+		u16 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
+			if (!at32dac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			dac->dma.buf[at32dac_get_head(dac)]
+				= (sample << 16) | sample;
+			dac->dma.head++;
+		}
+	}
+
+	return ret;
+}
+
+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
+			   size_t ucount)
+{
+	ssize_t ret;
+
+	if (dac->dsp_settings.channels == 2) {
+		const u32 __user *up = (const u32 __user *)ubuf;
+		u32 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
+			if (!at32dac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			/* Swap bytes in each halfword */
+			dac->dma.buf[at32dac_get_head(dac)] = swahb32(sample);
+			dac->dma.head++;
+		}
+	} else {
+		const u16 __user *up = (const u16 __user *)ubuf;
+		u16 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
+			if (!at32dac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			sample = swab16(sample);
+			dac->dma.buf[at32dac_get_head(dac)]
+				= (sample << 16) | sample;
+			dac->dma.head++;
+		}
+	}
+
+	return ret;
+}
+
+static ssize_t at32dac_dma_translate_from_user(struct at32_dac *dac,
+					       const char __user *buffer,
+					       size_t count)
+{
+	/* At least one buffer must be available at this point */
+	pr_debug("at32dac: Copying %zu bytes from user...\n", count);
+
+	return dac->trans(dac, buffer, count);
+}
+
+static int at32dac_set_format(struct at32_dac *dac, int format)
+{
+	unsigned int order;
+
+	switch (format) {
+	case AFMT_S16_BE:
+		order = 1;
+		dac->trans = trans_s16be;
+		break;
+	case AFMT_S16_LE:
+		order = 1;
+		dac->trans = trans_s16le;
+		break;
+	default:
+		printk("at32dac: Unsupported format: %d\n", format);
+		return -EINVAL;
+	}
+
+	if (dac->dsp_settings.channels == 2)
+		order++;
+
+	dac->dsp_settings.input_order = order;
+	dac->dsp_settings.format = format;
+	return 0;
+}
+
+static int at32dac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
+{
+	unsigned long new_rate;
+	int ret;
+
+	ret = clk_set_rate(dac->sample_clk, 256 * rate);
+	if (ret < 0)
+		return ret;
+
+	/* TODO: mplayer seems to have a problem with this */
+#if 0
+	new_rate = clk_get_rate(dac->sample_clk);
+	dac->dsp_settings.sample_rate = new_rate / 256;
+#else
+	dac->dsp_settings.sample_rate = rate;
+#endif
+
+	return 0;
+}
+
+static ssize_t at32dac_dsp_write(struct file *file,
+				 const char __user *buffer,
+				 size_t count, loff_t *ppos)
+{
+	struct at32_dac *dac = file->private_data;
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned int avail;
+	ssize_t copied;
+	ssize_t ret;
+
+	/* Avoid address space checking in the translation functions */
+	if (!access_ok(buffer, count, VERIFY_READ))
+		return -EFAULT;
+
+	down(&dac->sem);
+
+	if (!dac->dma.buf) {
+		ret = at32dac_dma_prepare(dac);
+		if (ret)
+			goto out;
+	}
+
+	add_wait_queue(&dac->write_wait, &wait);
+	ret = 0;
+	while (count > 0) {
+		do {
+			at32dac_update_dma_tail(dac);
+			avail = at32dac_dma_space(dac);
+			set_current_state(TASK_INTERRUPTIBLE);
+			if (avail >= DMA_WRITE_THRESHOLD)
+				break;
+
+			if (file->f_flags & O_NONBLOCK) {
+				if (!ret)
+					ret = -EAGAIN;
+				goto out;
+			}
+
+			pr_debug("Going to wait (avail = %u, count = %zu)\n",
+				 avail, count);
+
+			up(&dac->sem);
+			schedule();
+			if (signal_pending(current)) {
+				if (!ret)
+					ret = -ERESTARTSYS;
+				goto out_nosem;
+			}
+			down(&dac->sem);
+		} while (1);
+
+		copied = at32dac_dma_translate_from_user(dac, buffer, count);
+		if (copied < 0) {
+			if (!ret)
+				ret = -EFAULT;
+			goto out;
+		}
+
+		at32dac_start(dac);
+
+		count -= copied;
+		ret += copied;
+	}
+
+out:
+	up(&dac->sem);
+out_nosem:
+	remove_wait_queue(&dac->write_wait, &wait);
+	set_current_state(TASK_RUNNING);
+	return ret;
+}
+
+static int at32dac_dsp_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	struct at32_dac *dac = file->private_data;
+	int __user *up = (int __user *)arg;
+	struct audio_buf_info abinfo;
+	int val, ret;
+
+	switch (cmd) {
+	case OSS_GETVERSION:
+		return put_user(SOUND_VERSION, up);
+
+	case SNDCTL_DSP_SPEED:
+		if (get_user(val, up))
+			return -EFAULT;
+		if (val >= 0) {
+			at32dac_stop(dac);
+			ret = at32dac_set_sample_rate(dac, val);
+			if (ret)
+				return ret;
+		}
+		return put_user(dac->dsp_settings.sample_rate, up);
+
+	case SNDCTL_DSP_STEREO:
+		if (get_user(val, up))
+			return -EFAULT;
+		at32dac_stop(dac);
+		if (val && dac->dsp_settings.channels == 1)
+			dac->dsp_settings.input_order++;
+		else if (!val && dac->dsp_settings.channels != 1)
+			dac->dsp_settings.input_order--;
+		dac->dsp_settings.channels = val ? 2 : 1;
+		return 0;
+
+	case SNDCTL_DSP_CHANNELS:
+		if (get_user(val, up))
+			return -EFAULT;
+
+		if (val) {
+			if (val < 0 || val > 2)
+				return -EINVAL;
+
+			at32dac_stop(dac);
+			dac->dsp_settings.input_order
+				+= val - dac->dsp_settings.channels;
+			dac->dsp_settings.channels = val;
+		}
+		return put_user(val, (int *)arg);
+
+	case SNDCTL_DSP_GETFMTS:
+		return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
+
+	case SNDCTL_DSP_SETFMT:
+		if (get_user(val, up))
+			return -EFAULT;
+
+		if (val == AFMT_QUERY) {
+			val = dac->dsp_settings.format;
+		} else {
+			ret = at32dac_set_format(dac, val);
+			if (ret)
+				return ret;
+		}
+		return put_user(val, up);
+
+	case SNDCTL_DSP_GETOSPACE:
+		at32dac_update_dma_tail(dac);
+		abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
+				   * (DMA_PERIOD_SIZE / 4));
+		abinfo.bytes = (at32dac_dma_space(dac)
+				<< dac->dsp_settings.input_order);
+		abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
+				     >> (DMA_PERIOD_SHIFT
+					 + dac->dsp_settings.input_order));
+		abinfo.fragments = ((abinfo.bytes
+				     >> dac->dsp_settings.input_order)
+				    / (DMA_PERIOD_SIZE / 4));
+		pr_debug("fragments=%d  fragstotal=%d  fragsize=%d bytes=%d\n",
+			 abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
+			 abinfo.bytes);
+		return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
+
+	default:
+		printk("at32dac: Unimplemented ioctl cmd: 0x%x\n", cmd);
+		return -EINVAL;
+	}
+}
+
+static int at32dac_dsp_open(struct inode *inode, struct file *file)
+{
+	struct at32_dac *dac = the_dac;
+	int ret;
+
+	if (file->f_mode & FMODE_READ)
+		return -ENXIO;
+
+	down(&dac->sem);
+	ret = -EBUSY;
+	if (dac->busy)
+		goto out;
+
+	dac->dma.head = dac->dma.tail = 0;
+
+	/* FIXME: What are the correct defaults?  */
+	dac->dsp_settings.channels = 2;
+	at32dac_set_format(dac, AFMT_S16_BE);
+	ret = at32dac_set_sample_rate(dac, 8000);
+	if (ret)
+		goto out;
+
+	file->private_data = dac;
+	dac->busy = 1;
+
+	ret = 0;
+
+out:
+	up(&dac->sem);
+	return ret;
+}
+
+static int at32dac_dsp_release(struct inode *inode, struct file *file)
+{
+	struct at32_dac *dac = file->private_data;
+
+	down(&dac->sem);
+
+	at32dac_stop(dac);
+	at32dac_dma_cleanup(dac);
+	dac->busy = 0;
+
+	up(&dac->sem);
+
+	return 0;
+}
+
+static struct file_operations at32dac_dsp_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= at32dac_dsp_write,
+	.ioctl		= at32dac_dsp_ioctl,
+	.open		= at32dac_dsp_open,
+	.release	= at32dac_dsp_release,
+};
+
+static int __devinit at32dac_probe(struct platform_device *pdev)
+{
+	struct at32_dac *dac;
+	struct resource *regs;
+	struct clk *mck;
+	struct clk *sample_clk;
+	int irq;
+	int ret;
+
+	if (the_dac)
+		return -EBUSY;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	mck = clk_get(&pdev->dev, "mck");
+	if (IS_ERR(mck))
+		return PTR_ERR(mck);
+	sample_clk = clk_get(&pdev->dev, "sample_clk");
+	if (IS_ERR(sample_clk)) {
+		ret = PTR_ERR(sample_clk);
+		goto out_put_mck;
+	}
+	clk_enable(mck);
+
+	ret = -ENOMEM;
+	dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
+	if (!dac)
+		goto out_disable_clk;
+
+	spin_lock_init(&dac->lock);
+	init_MUTEX(&dac->sem);
+	init_waitqueue_head(&dac->write_wait);
+	dac->pdev = pdev;
+	dac->mck = mck;
+	dac->sample_clk = sample_clk;
+
+	dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!dac->regs)
+		goto out_free_dac;
+
+	ret = request_irq(irq, at32dac_interrupt, 0, "dac", dac);
+	if (ret)
+		goto out_unmap_regs;
+
+	/* FIXME */
+	dac->req.req.dmac = find_dma_controller(0);
+	if (!dac->req.req.dmac)
+		goto out_free_irq;
+
+	ret = dma_alloc_channel(dac->req.req.dmac);
+	if (ret < 0)
+		goto out_free_irq;
+
+	dac->req.req.channel = ret;
+	dac->req.req.block_complete = at32dac_dma_block_complete;
+	dac->req.req.error = at32dac_dma_error;
+	dac->req.data_reg = regs->start + DAC_DATA;
+	dac->req.periph_id = 2; /* FIXME */
+	dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
+	dac->req.width = DMA_WIDTH_32BIT;
+
+	/* Make sure the DAC is silent and disabled */
+	dac_writel(dac, DATA, 0);
+	dac_writel(dac, CTRL, 0);
+
+	ret = register_sound_dsp(&at32dac_dsp_fops, -1);
+	if (ret < 0)
+		goto out_free_dma;
+	dac->dev_dsp = ret;
+
+	/* TODO: Register mixer */
+
+	the_dac = dac;
+	platform_set_drvdata(pdev, dac);
+
+	return 0;
+
+out_free_dma:
+	dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
+out_free_irq:
+	free_irq(irq, dac);
+out_unmap_regs:
+	iounmap(dac->regs);
+out_free_dac:
+	kfree(dac);
+out_disable_clk:
+	clk_disable(mck);
+	clk_put(sample_clk);
+out_put_mck:
+	clk_put(mck);
+	return ret;
+}
+
+static int __devexit at32dac_remove(struct platform_device *pdev)
+{
+	struct at32_dac *dac;
+
+	dac = platform_get_drvdata(pdev);
+	if (dac) {
+		unregister_sound_dsp(dac->dev_dsp);
+		dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
+		free_irq(platform_get_irq(pdev, 0), dac);
+		iounmap(dac->regs);
+		clk_disable(dac->mck);
+		clk_put(dac->sample_clk);
+		clk_put(dac->mck);
+		kfree(dac);
+		platform_set_drvdata(pdev, NULL);
+		the_dac = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver at32dac_driver = {
+	.probe		= at32dac_probe,
+	.remove		= __devexit_p(at32dac_remove),
+	.driver		= {
+		.name	= "dac",
+	},
+};
+
+static int __init at32dac_init(void)
+{
+	return platform_driver_register(&at32dac_driver);
+}
+module_init(at32dac_init);
+
+static void __exit at32dac_exit(void)
+{
+	platform_driver_unregister(&at32dac_driver);
+}
+module_exit(at32dac_exit);
+
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_DESCRIPTION("DMA Sound Driver for the Atmel AT32 on-chip DAC");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.20.4-0rig/sound/oss/at32dac.h linux-2.6.20.4-atmel/sound/oss/at32dac.h
--- linux-2.6.20.4-0rig/sound/oss/at32dac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/oss/at32dac.h	2007-03-24 16:42:29.000000000 +0100
@@ -0,0 +1,65 @@
+/*
+ * Register definitions for the Atmel AT32 on-chip DAC.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_DAC_H__
+#define __ASM_AVR32_DAC_H__
+
+/* DAC register offsets */
+#define DAC_DATA                                0x0000
+#define DAC_CTRL                                0x0008
+#define DAC_INT_MASK                            0x000c
+#define DAC_INT_EN                              0x0010
+#define DAC_INT_DIS                             0x0014
+#define DAC_INT_CLR                             0x0018
+#define DAC_INT_STATUS                          0x001c
+#define DAC_PDC_DATA                            0x0020
+
+/* Bitfields in DATA */
+#define DAC_DATA_OFFSET                         0
+#define DAC_DATA_SIZE                           32
+
+/* Bitfields in CTRL */
+#define DAC_SWAP_OFFSET                         30
+#define DAC_SWAP_SIZE                           1
+#define DAC_EN_OFFSET                           31
+#define DAC_EN_SIZE                             1
+
+/* Bitfields in INT_MASK */
+
+/* Bitfields in INT_EN */
+
+/* Bitfields in INT_DIS */
+#define DAC_TX_READY_OFFSET                     29
+#define DAC_TX_READY_SIZE                       1
+#define DAC_TX_BUFFER_EMPTY_OFFSET              30
+#define DAC_TX_BUFFER_EMPTY_SIZE                1
+#define DAC_CHANNEL_TX_END_OFFSET               31
+#define DAC_CHANNEL_TX_END_SIZE                 1
+
+/* Bitfields in INT_CLR */
+#define DAC_UNDERRUN_OFFSET                     28
+#define DAC_UNDERRUN_SIZE                       1
+
+/* Bitfields in INT_STATUS */
+
+/* Bitfields in PDC_DATA */
+
+/* Bit manipulation macros */
+#define DAC_BIT(name)                           (1 << DAC_##name##_OFFSET)
+#define DAC_BF(name,value)                      (((value) & ((1 << DAC_##name##_SIZE) - 1)) << DAC_##name##_OFFSET)
+#define DAC_BFEXT(name,value)                   (((value) >> DAC_##name##_OFFSET) & ((1 << DAC_##name##_SIZE) - 1))
+#define DAC_BFINS(name,value,old)               (((old) & ~(((1 << DAC_##name##_SIZE) - 1) << DAC_##name##_OFFSET)) | DAC_BF(name,value))
+
+/* Register access macros */
+#define dac_readl(port,reg)				\
+	__raw_readl((port)->regs + DAC_##reg)
+#define dac_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + DAC_##reg)
+
+#endif /* __ASM_AVR32_DAC_H__ */
diff -urN linux-2.6.20.4-0rig/sound/oss/Kconfig linux-2.6.20.4-atmel/sound/oss/Kconfig
--- linux-2.6.20.4-0rig/sound/oss/Kconfig	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/oss/Kconfig	2007-03-24 16:42:29.000000000 +0100
@@ -750,3 +750,7 @@
 	int "DAC channel"
 	default "1"
 	depends on SOUND_SH_DAC_AUDIO
+
+config SOUND_AT32_DAC
+	tristate "Atmel AT32 On-chip DAC support"
+	depends on SOUND_PRIME && AVR32
diff -urN linux-2.6.20.4-0rig/sound/oss/Makefile linux-2.6.20.4-atmel/sound/oss/Makefile
--- linux-2.6.20.4-0rig/sound/oss/Makefile	2007-03-23 20:52:51.000000000 +0100
+++ linux-2.6.20.4-atmel/sound/oss/Makefile	2007-03-24 16:42:29.000000000 +0100
@@ -10,6 +10,7 @@
 
 # Please leave it as is, cause the link order is significant !
 
+obj-$(CONFIG_SOUND_AT32_DAC)	+= at32dac.o
 obj-$(CONFIG_SOUND_SH_DAC_AUDIO)	+= sh_dac_audio.o
 obj-$(CONFIG_SOUND_HAL2)	+= hal2.o
 obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o