############################################################# # # uClibc (the C library) # ############################################################# ifeq ($(BR2_TOOLCHAIN_SOURCE),y) # specifying UCLIBC_CONFIG_FILE on the command-line overrides the .config # setting. ifndef UCLIBC_CONFIG_FILE UCLIBC_CONFIG_FILE=$(subst ",, $(strip $(BR2_UCLIBC_CONFIG))) #") endif ifeq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y) # Be aware that this changes daily.... UCLIBC_VER:=0.9.29 UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc UCLIBC_SOURCE:=uClibc-$(strip $(subst ",, $(BR2_USE_UCLIBC_SNAPSHOT))).tar.bz2 #")) UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots UCLIBC_PATCH_DIR:=toolchain/uClibc/ else # releases ifeq ($(BR2_UCLIBC_VERSION_0_9_29),y) UCLIBC_VER:=0.9.29 endif ifeq ($(BR2_UCLIBC_VERSION_0_9_28_3),y) UCLIBC_VER:=0.9.28.3 endif ifeq ($(BR2_UCLIBC_VERSION_0_9_28),y) UCLIBC_VER:=0.9.28 endif UCLIBC_SITE:=http://www.uclibc.org/downloads ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SOURCE),y) UCLIBC_SITE:=$(VENDOR_SITE) endif UCLIBC_OFFICIAL_VERSION:=$(UCLIBC_VER)$(VENDOR_SUFFIX)$(VENDOR_UCLIBC_RELEASE) ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) UCLIBC_PATCH_DIR:=toolchain/uClibc/ else UCLIBC_PATCH_DIR:=$(VENDOR_PATCH_DIR)/uClibc-$(UCLIBC_OFFICIAL_VERSION) endif UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc-$(UCLIBC_OFFICIAL_VERSION) UCLIBC_SOURCE:=uClibc-$(UCLIBC_OFFICIAL_VERSION).tar.bz2 endif UCLIBC_CAT:=$(BZCAT) UCLIBC_TARGET_ARCH:=$(shell $(SHELL) -c "echo $(ARCH) | sed \ -e 's/-.*//' \ -e 's/i.86/i386/' \ -e 's/sparc.*/sparc/' \ -e 's/arm.*/arm/g' \ -e 's/m68k.*/m68k/' \ -e 's/ppc/powerpc/g' \ -e 's/v850.*/v850/g' \ -e 's/sh[234].*/sh/' \ -e 's/mips.*/mips/' \ -e 's/mipsel.*/mips/' \ -e 's/cris.*/cris/' \ -e 's/nios2.*/nios2/' \ ") # just handle the ones that can be big or little UCLIBC_TARGET_ENDIAN:=$(shell $(SHELL) -c "echo $(ARCH) | sed \ -e 's/armeb/BIG/' \ -e 's/arm/LITTLE/' \ -e 's/mipsel/LITTLE/' \ -e 's/mips/BIG/' \ -e 's/sh[234].*eb/BIG/' \ -e 's/sh[234]/LITTLE/' \ -e 's/sparc.*/BIG/' \ ") ifneq ($(UCLIBC_TARGET_ENDIAN),LITTLE) ifneq ($(UCLIBC_TARGET_ENDIAN),BIG) UCLIBC_TARGET_ENDIAN:= endif endif ifeq ($(UCLIBC_TARGET_ENDIAN),LITTLE) UCLIBC_NOT_TARGET_ENDIAN:=BIG else UCLIBC_NOT_TARGET_ENDIAN:=LITTLE endif UCLIBC_ARM_TYPE:=CONFIG_$(strip $(subst ",, $(BR2_ARM_TYPE))) #")) UCLIBC_SPARC_TYPE:=CONFIG_SPARC_$(strip $(subst ",, $(BR2_SPARC_TYPE))) #")) $(DL_DIR)/$(UCLIBC_SOURCE): $(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE) ifneq ($(BR2_ENABLE_LOCALE),) UCLIBC_SITE_LOCALE:=http://www.uclibc.org/downloads UCLIBC_SOURCE_LOCALE:=uClibc-locale-030818.tgz $(DL_DIR)/$(UCLIBC_SOURCE_LOCALE): $(WGET) -P $(DL_DIR) $(UCLIBC_SITE_LOCALE)/$(UCLIBC_SOURCE_LOCALE) UCLIBC_LOCALE_DATA:=$(DL_DIR)/$(UCLIBC_SOURCE_LOCALE) else UCLIBC_LOCALE_DATA= endif $(UCLIBC_DIR)/.unpacked: $(DL_DIR)/$(UCLIBC_SOURCE) $(UCLIBC_LOCALE_DATA) mkdir -p $(TOOL_BUILD_DIR) rm -rf $(UCLIBC_DIR) $(UCLIBC_CAT) $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(TOOL_BUILD_DIR) $(TAR_OPTIONS) - ifneq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y) toolchain/patch-kernel.sh $(UCLIBC_DIR) $(UCLIBC_PATCH_DIR) \ uClibc-$(UCLIBC_OFFICIAL_VERSION)-\*.patch \ uClibc-$(UCLIBC_OFFICIAL_VERSION)-\*.patch.$(ARCH) else toolchain/patch-kernel.sh $(UCLIBC_DIR) $(UCLIBC_PATCH_DIR) \ uClibc.\*.patch uClibc.\*.patch.$(ARCH) endif ifneq ($(BR2_ENABLE_LOCALE),) cp -dpf $(DL_DIR)/$(UCLIBC_SOURCE_LOCALE) $(UCLIBC_DIR)/extra/locale/ endif touch $@ # Some targets may wish to provide their own UCLIBC_CONFIG_FILE... $(UCLIBC_DIR)/.oldconfig: $(UCLIBC_DIR)/.unpacked $(UCLIBC_CONFIG_FILE) cp -f $(UCLIBC_CONFIG_FILE) $(UCLIBC_DIR)/.oldconfig $(SED) 's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="$(TARGET_CROSS)",g' \ -e 's,# TARGET_$(UCLIBC_TARGET_ARCH) is not set,TARGET_$(UCLIBC_TARGET_ARCH)=y,g' \ -e 's,^TARGET_ARCH=".*",TARGET_ARCH=\"$(UCLIBC_TARGET_ARCH)\",g' \ -e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_HEADERS_DIR)\",g' \ -e 's,^KERNEL_HEADERS=.*,KERNEL_HEADERS=\"$(LINUX_HEADERS_DIR)/include\",g' \ -e 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \ -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \ -e 's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \ $(UCLIBC_DIR)/.oldconfig ifeq ($(UCLIBC_TARGET_ARCH),arm) (/bin/echo "# CONFIG_GENERIC_ARM is not set"; \ /bin/echo "# CONFIG_ARM610 is not set"; \ /bin/echo "# CONFIG_ARM710 is not set"; \ /bin/echo "# CONFIG_ARM7TDMI is not set"; \ /bin/echo "# CONFIG_ARM720T is not set"; \ /bin/echo "# CONFIG_ARM920T is not set"; \ /bin/echo "# CONFIG_ARM922T is not set"; \ /bin/echo "# CONFIG_ARM926T is not set"; \ /bin/echo "# CONFIG_ARM10T is not set"; \ /bin/echo "# CONFIG_ARM1136JF_S is not set"; \ /bin/echo "# CONFIG_ARM1176JZ_S is not set"; \ /bin/echo "# CONFIG_ARM1176JZF_S is not set"; \ /bin/echo "# CONFIG_ARM_SA110 is not set"; \ /bin/echo "# CONFIG_ARM_SA1100 is not set"; \ /bin/echo "# CONFIG_ARM_XSCALE is not set"; \ /bin/echo "# CONFIG_ARM_IWMMXT is not set"; \ ) >> $(UCLIBC_DIR)/.oldconfig $(SED) 's/^\(CONFIG_[^_]*[_]*ARM[^=]*\)=.*/# \1 is not set/g' \ $(UCLIBC_DIR)/.oldconfig $(SED) 's/^.*$(UCLIBC_ARM_TYPE).*/$(UCLIBC_ARM_TYPE)=y/g' $(UCLIBC_DIR)/.oldconfig $(SED) '/CONFIG_ARM_.ABI/d' $(UCLIBC_DIR)/.oldconfig ifeq ($(BR2_ARM_EABI),y) /bin/echo "# CONFIG_ARM_OABI is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "CONFIG_ARM_EABI=y" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_ARM_OABI),y) /bin/echo "CONFIG_ARM_OABI=y" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_ARM_EABI is not set" >> $(UCLIBC_DIR)/.oldconfig endif endif ifeq ($(UCLIBC_TARGET_ARCH),mips) $(SED) '/CONFIG_MIPS_[NO].._ABI/d' $(UCLIBC_DIR)/.oldconfig $(SED) '/CONFIG_MIPS_ISA_.*/d' $(UCLIBC_DIR)/.oldconfig (/bin/echo "# CONFIG_MIPS_O32_ABI is not set"; \ /bin/echo "# CONFIG_MIPS_N32_ABI is not set"; \ /bin/echo "# CONFIG_MIPS_N64_ABI is not set"; \ /bin/echo "# CONFIG_MIPS_ISA_1 is not set"; \ /bin/echo "# CONFIG_MIPS_ISA_2 is not set"; \ /bin/echo "# CONFIG_MIPS_ISA_3 is not set"; \ /bin/echo "# CONFIG_MIPS_ISA_4 is not set"; \ /bin/echo "# CONFIG_MIPS_ISA_MIPS32 is not set"; \ /bin/echo "# CONFIG_MIPS_ISA_MIPS64 is not set"; \ ) >> $(UCLIBC_DIR)/.oldconfig ifeq ($(BR2_MIPS_OABI),y) $(SED) 's/.*\(CONFIG_MIPS_O32_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_MIPS_EABI),y) $(SED) 's/.*\(CONFIG_MIPS_N32_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_MIPS_ABI64),y) $(SED) 's/.*\(CONFIG_MIPS_N64_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_1),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_1\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_2),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_2\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_3),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_3\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_4),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_4\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_32),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_MIPS32\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_32r2),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_MIPS32\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_mips_64),y) $(SED) 's/.*\(CONFIG_MIPS_ISA_MIPS64\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig endif endif ifeq ($(UCLIBC_TARGET_ARCH),nios2) /bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "UCLIBC_FORMAT_FLAT=y" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(UCLIBC_TARGET_ARCH),sh) /bin/echo "# CONFIG_SH2A is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_SH2 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_SH3 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_SH4 is not set" >> $(UCLIBC_DIR)/.oldconfig ifeq ($(BR2_sh2a_nofpueb),y) $(SED) 's,# CONFIG_SH2A is not set,CONFIG_SH2A=y,g' $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_sh2eb),y) $(SED) 's,# CONFIG_SH2 is not set,CONFIG_SH2=y,g' $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_sh3eb),y) $(SED) 's,# CONFIG_SH3 is not set,CONFIG_SH3=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_sh3),y) $(SED) 's,# CONFIG_SH3 is not set,CONFIG_SH3=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_sh4eb),y) $(SED) 's,# CONFIG_SH4 is not set,CONFIG_SH4=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_sh4),y) $(SED) 's,# CONFIG_SH4 is not set,CONFIG_SH4=y,g' $(UCLIBC_DIR)/.oldconfig endif endif ifeq ($(UCLIBC_TARGET_ARCH),sparc) $(SED) 's/^\(CONFIG_[^_]*[_]*SPARC[^=]*\)=.*/# \1 is not set/g' \ $(UCLIBC_DIR)/.oldconfig for i in V7 V8 V9 V9B; do echo "# CONFIG_SPARC_$$i is not set"; done \ >> $(UCLIBC_DIR)/.oldconfig $(SED) 's/^.*$(UCLIBC_SPARC_TYPE).*/$(UCLIBC_SPARC_TYPE)=y/g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(UCLIBC_TARGET_ARCH),powerpc) ifeq ($(BR2_powerpc_8540),y) /bin/echo "# CONFIG_CLASSIC is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "CONFIG_E500=y" >> $(UCLIBC_DIR)/.oldconfig else /bin/echo "CONFIG_CLASSIC=y" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_E500 is not set" >> $(UCLIBC_DIR)/.oldconfig endif endif ifneq ($(UCLIBC_TARGET_ENDIAN),) # The above doesn't work for me, so redo $(SED) 's/.*\(ARCH_$(UCLIBC_NOT_TARGET_ENDIAN)_ENDIAN\).*/# \1 is not set/g' \ -e 's/.*\(ARCH_WANTS_$(UCLIBC_NOT_TARGET_ENDIAN)_ENDIAN\).*/# \1 is not set/g' \ -e 's/.*\(ARCH_$(UCLIBC_TARGET_ENDIAN)_ENDIAN\).*/\1=y/g' \ -e 's/.*\(ARCH_WANTS_$(UCLIBC_TARGET_ENDIAN)_ENDIAN\).*/\1=y/g' \ $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_LARGEFILE),y) $(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.oldconfig else $(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.oldconfig $(SED) '/.*UCLIBC_HAS_FOPEN_LARGEFILE_MODE.*/d' $(UCLIBC_DIR)/.oldconfig echo "# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_INET_IPV6),y) $(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=y,g' $(UCLIBC_DIR)/.oldconfig else $(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=n,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_INET_RPC),y) $(SED) 's,^.*UCLIBC_HAS_RPC.*,UCLIBC_HAS_RPC=y,g' \ -e 's,^.*UCLIBC_HAS_FULL_RPC.*,UCLIBC_HAS_FULL_RPC=y,g' \ -e 's,^.*UCLIBC_HAS_REENTRANT_RPC.*,UCLIBC_HAS_REENTRANT_RPC=y,g' \ $(UCLIBC_DIR)/.oldconfig else $(SED) 's,^.*UCLIBC_HAS_RPC.*,UCLIBC_HAS_RPC=n,g' \ -e 's,^.*UCLIBC_HAS_FULL_RPC.*,UCLIBC_HAS_FULL_RPC=n,g' \ -e 's,^.*UCLIBC_HAS_REENTRANT_RPC.*,UCLIBC_HAS_REENTRANT_RPC=n,g' \ $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_SOFT_FLOAT),y) $(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n,g' \ -e 's,^[^_]*HAS_FPU.*,HAS_FPU=n,g' \ -e 's,.*UCLIBC_HAS_FLOATS.*,UCLIBC_HAS_FLOATS=y,g' \ -e 's,.*DO_C99_MATH.*,DO_C99_MATH=y,g' \ $(UCLIBC_DIR)/.oldconfig #$(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n\nHAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.oldconfig else $(SED) '/UCLIBC_HAS_FLOATS/d' \ -e 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=y\nHAS_FPU=y\nUCLIBC_HAS_FLOATS=y\n,g' \ $(UCLIBC_DIR)/.oldconfig endif $(SED) '/UCLIBC_HAS_THREADS/d' $(UCLIBC_DIR)/.oldconfig $(SED) '/LINUXTHREADS/d' $(UCLIBC_DIR)/.oldconfig $(SED) '/LINUXTHREADS_OLD/d' $(UCLIBC_DIR)/.oldconfig $(SED) '/PTHREADS_DEBUG_SUPPORT/d' $(UCLIBC_DIR)/.oldconfig $(SED) '/UCLIBC_HAS_THREADS_NATIVE/d' $(UCLIBC_DIR)/.oldconfig ifeq ($(BR2_PTHREADS_NONE),y) echo "# UCLIBC_HAS_THREADS is not set" >> $(UCLIBC_DIR)/.oldconfig else echo "UCLIBC_HAS_THREADS=y" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_PTHREADS),y) echo "LINUXTHREADS=y" >> $(UCLIBC_DIR)/.oldconfig else echo "# LINUXTHREADS is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_PTHREADS_OLD),y) echo "LINUXTHREADS_OLD=y" >> $(UCLIBC_DIR)/.oldconfig else echo "# LINUXTHREADS_OLD is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_PTHREADS_NATIVE),y) echo "UCLIBC_HAS_THREADS_NATIVE=y" >> $(UCLIBC_DIR)/.oldconfig else echo "# UCLIBC_HAS_THREADS_NATIVE is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_PTHREAD_DEBUG),y) echo "PTHREADS_DEBUG_SUPPORT=y" >> $(UCLIBC_DIR)/.oldconfig else echo "# PTHREADS_DEBUG_SUPPORT is not set" >> $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_ENABLE_LOCALE),y) $(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=y\nUCLIBC_PREGENERATED_LOCALE_DATA=y\nUCLIBC_DOWNLOAD_PREGENERATED_LOCALE_DATA=y\nUCLIBC_HAS_XLOCALE=y\nUCLIBC_HAS_GLIBC_DIGIT_GROUPING=n\n,g' $(UCLIBC_DIR)/.oldconfig $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.oldconfig else $(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=n,g' $(UCLIBC_DIR)/.oldconfig $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_USE_WCHAR),y) $(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.oldconfig else $(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_UCLIBC_PROGRAM_INVOCATION),y) $(SED) 's,^.*UCLIBC_HAS_PROGRAM_INVOCATION_NAME.*,UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y,g' $(UCLIBC_DIR)/.oldconfig else $(SED) 's,^.*UCLIBC_HAS_PROGRAM_INVOCATION_NAME.*,UCLIBC_HAS_PROGRAM_INVOCATION_NAME=n,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ("$(KERNEL_ARCH)","i386") /bin/echo "# CONFIG_GENERIC_386 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_386 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_486 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_586 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_586MMX is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_686 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_PENTIUMII is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_PENTIUMIII is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_PENTIUM4 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_K6 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_K7 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_ELAN is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_CRUSOE is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_WINCHIPC6 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_WINCHIP2 is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_CYRIXIII is not set" >> $(UCLIBC_DIR)/.oldconfig /bin/echo "# CONFIG_NEHEMIAH is not set" >> $(UCLIBC_DIR)/.oldconfig ifeq ($(BR2_x86_i386),y) $(SED) 's,# CONFIG_386 is not set,CONFIG_386=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_i486),y) $(SED) 's,# CONFIG_486 is not set,CONFIG_486=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_i586),y) $(SED) 's,# CONFIG_586 is not set,CONFIG_586=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_pentium_mmx),y) $(SED) 's,# CONFIG_586MMX is not set,CONFIG_586MMX=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_i686),y) $(SED) 's,# CONFIG_686 is not set,CONFIG_686=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_pentiumpro),y) $(SED) 's,# CONFIG_686 is not set,CONFIG_686=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_pentium2),y) $(SED) 's,# CONFIG_PENTIUMII is not set,CONFIG_PENTIUMII=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_pentium3),y) $(SED) 's,# CONFIG_PENTIUMIII is not set,CONFIG_PENTIUMIII=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_pentium4),y) $(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_pentium_m),y) $(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_nocona),y) $(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig endif ifeq ($(BR2_x86_core2),y) $(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig endif endif $(UCLIBC_DIR)/.config: $(UCLIBC_DIR)/.oldconfig cp -f $(UCLIBC_DIR)/.oldconfig $(UCLIBC_DIR)/.config mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/include mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/lib mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/lib $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \ DEVEL_PREFIX=/usr/ \ RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \ HOSTCC="$(HOSTCC)" \ oldconfig touch $@ $(UCLIBC_DIR)/.configured: $(LINUX_HEADERS_DIR)/.configured $(UCLIBC_DIR)/.config set -x && $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \ DEVEL_PREFIX=/usr/ \ RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \ HOSTCC="$(HOSTCC)" \ headers install_dev # Install the kernel headers to the first stage gcc include dir # if necessary ifeq ($(LINUX_HEADERS_IS_KERNEL),y) if [ ! -f $(TOOL_BUILD_DIR)/uClibc_dev/usr/include/linux/version.h ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/* \ $(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \ fi else if [ ! -f $(STAGING_DIR)/usr/include/linux/version.h ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/asm \ $(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \ cp -pLR $(LINUX_HEADERS_DIR)/include/linux \ $(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \ if [ -d $(LINUX_HEADERS_DIR)/include/asm-generic ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/asm-generic \ $(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \ fi; \ fi endif touch $@ $(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.configured $(gcc_initial) $(LIBFLOAT_TARGET) $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX= \ DEVEL_PREFIX=/ \ RUNTIME_PREFIX=/ \ HOSTCC="$(HOSTCC)" \ all touch -c $@ uclibc-menuconfig: host-sed $(UCLIBC_DIR)/.config $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \ DEVEL_PREFIX=/usr/ \ RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \ HOSTCC="$(HOSTCC)" \ menuconfig && \ touch -c $(UCLIBC_DIR)/.config $(STAGING_DIR)/usr/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a ifneq ($(BR2_TOOLCHAIN_SYSROOT),y) $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX= \ DEVEL_PREFIX=$(STAGING_DIR)/ \ RUNTIME_PREFIX=$(STAGING_DIR)/ \ install_runtime install_dev else $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX=$(STAGING_DIR) \ DEVEL_PREFIX=/usr/ \ RUNTIME_PREFIX=/ \ install_runtime install_dev endif # Install the kernel headers to the staging dir if necessary ifeq ($(LINUX_HEADERS_IS_KERNEL),y) if [ ! -f $(STAGING_DIR)/usr/include/linux/version.h ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/* \ $(STAGING_DIR)/usr/include/; \ fi else if [ ! -f $(STAGING_DIR)/usr/include/linux/version.h ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/asm \ $(STAGING_DIR)/usr/include/; \ cp -pLR $(LINUX_HEADERS_DIR)/include/linux \ $(STAGING_DIR)/usr/include/; \ if [ -d $(LINUX_HEADERS_DIR)/include/asm-generic ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/asm-generic \ $(STAGING_DIR)/usr/include/; \ fi; \ fi endif # Build the host utils. Need to add an install target... $(MAKE1) -C $(UCLIBC_DIR)/utils \ PREFIX=$(STAGING_DIR) \ HOSTCC="$(HOSTCC)" \ hostutils if [ -f $(UCLIBC_DIR)/utils/ldd.host ]; then \ install -c $(UCLIBC_DIR)/utils/ldd.host $(STAGING_DIR)/usr/bin/ldd; \ ln -sf ldd $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldd; \ fi if [ -f $(UCLIBC_DIR)/utils/ldconfig.host ]; then \ install -c $(UCLIBC_DIR)/utils/ldconfig.host $(STAGING_DIR)/usr/bin/ldconfig; \ ln -sf ldconfig $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldconfig; \ ln -sf ldconfig $(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-ldconfig; \ fi touch -c $@ ifneq ($(TARGET_DIR),) $(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/usr/lib/libc.a $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX=$(TARGET_DIR) \ DEVEL_PREFIX=/usr/ \ RUNTIME_PREFIX=/ \ install_runtime $(STRIPCMD) $(@D)/lib*.so* touch -c $@ $(TARGET_DIR)/usr/bin/ldd: $(cross_compiler) $(MAKE1) -C $(UCLIBC_DIR) CC=$(TARGET_CROSS)gcc \ CPP=$(TARGET_CROSS)cpp LD=$(TARGET_CROSS)ld \ PREFIX=$(TARGET_DIR) utils install_utils ifeq ($(strip $(BR2_CROSS_TOOLCHAIN_TARGET_UTILS)),y) mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/target_utils install -c $(TARGET_DIR)/usr/bin/ldd \ $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/target_utils/ldd endif touch -c $@ UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0 endif uclibc: $(cross_compiler) $(STAGING_DIR)/usr/lib/libc.a $(UCLIBC_TARGETS) uclibc-source: $(DL_DIR)/$(UCLIBC_SOURCE) uclibc-unpacked: $(UCLIBC_DIR)/.unpacked uclibc-config: $(UCLIBC_DIR)/.config uclibc-oldconfig: $(UCLIBC_DIR)/.oldconfig uclibc-update: uclibc-config cp -f $(UCLIBC_DIR)/.config $(UCLIBC_CONFIG_FILE) uclibc-configured: kernel-headers $(UCLIBC_DIR)/.configured uclibc-configured-source: uclibc-source uclibc-clean: -$(MAKE1) -C $(UCLIBC_DIR) clean rm -f $(UCLIBC_DIR)/.config uclibc-dirclean: rm -rf $(UCLIBC_DIR) uclibc-target-utils: #$(TARGET_DIR)/usr/bin/ldd uclibc-target-utils-source: $(DL_DIR)/$(UCLIBC_SOURCE) ############################################################# # # uClibc for the target just needs its header files # and whatnot installed. # ############################################################# $(TARGET_DIR)/usr/lib/libc.a: $(STAGING_DIR)/usr/lib/libc.a $(MAKE1) -C $(UCLIBC_DIR) \ PREFIX=$(TARGET_DIR) \ DEVEL_PREFIX=/usr/ \ RUNTIME_PREFIX=/ \ install_dev # Install the kernel headers to the target dir if necessary ifeq ($(LINUX_HEADERS_IS_KERNEL),y) if [ ! -f $(TARGET_DIR)/usr/include/linux/version.h ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/* \ $(TARGET_DIR)/usr/include/; \ fi else if [ ! -f $(TARGET_DIR)/usr/include/linux/version.h ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/asm \ $(TARGET_DIR)/usr/include/; \ cp -pLR $(LINUX_HEADERS_DIR)/include/linux \ $(TARGET_DIR)/usr/include/; \ if [ -d $(LINUX_HEADERS_DIR)/include/asm-generic ]; then \ cp -pLR $(LINUX_HEADERS_DIR)/include/asm-generic \ $(TARGET_DIR)/usr/include/; \ fi; \ fi endif touch -c $@ uclibc_target: cross_compiler uclibc $(TARGET_DIR)/usr/lib/libc.a $(TARGET_DIR)/usr/bin/ldd uclibc_target-clean: rm -rf $(TARGET_DIR)/usr/include \ $(TARGET_DIR)/usr/lib/libc.a $(TARGET_DIR)/usr/bin/ldd uclibc_target-dirclean: rm -rf $(TARGET_DIR)/usr/include endif