menuconfig BR2_TARGET_UBOOT bool "Das U-Boot Boot Monitor" help Build "Das U-Boot" Boot Monitor if BR2_TARGET_UBOOT config BR2_TARGET_UBOOT_BOARDNAME string "board name" default "$(BOARD_NAME)" help One of U-Boot supported boards to be built. This will be suffixed with _config to meet U-Boot standard naming. choice prompt "U-Boot Version" default BR2_TARGET_UBOOT_2008_10 help Select the specific U-Boot version you want to use config BR2_TARGET_UBOOT_2009_01 bool "u-boot-2009.01" config BR2_TARGET_UBOOT_2008_10 bool "u-boot-2008.10" config BR2_TARGET_UBOOT_1_3_4 bool "u-boot-1.3.4" depends on BR2_DEPRECATED config BR2_TARGET_UBOOT_1_2_0_ATMEL bool "u-boot-1.2.0-atmel" depends on BR2_TARGET_AT91 endchoice config BR2_UBOOT_VERSION string default "2009.01" if BR2_TARGET_UBOOT_2009_01 default "2008.10" if BR2_TARGET_UBOOT_2008_10 default "1.3.4" if BR2_TARGET_UBOOT_1_3_4 default "1.2.0-atmel" if BR2_TARGET_UBOOT_1_2_0_ATMEL config BR2_U_BOOT_SITE string default "$(BR2_ATMEL_MIRROR)" if BR2_TARGET_UBOOT_1_2_0_ATMEL default "ftp://ftp.denx.de/pub/u-boot" source "target/device/Config.in.u-boot" config BR2_TARGET_UBOOT_CUSTOM_PATCH string "custom patch" help If your board requires a custom patch, add the path to the file here. Most users may leave this empty choice prompt "Bootsource" depends on BR2_BOOTSOURCE default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD bool "Boot from dataflashcard" depends on BR2_BOOTSOURCE_DATAFLASHCARD config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH bool "Boot from dataflash" depends on BR2_BOOTSOURCE_DATAFLASH config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH bool "Boot from a NAND flash" depends on BR2_BOOTSOURCE_NANDFLASH config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH bool "Boot from a parallell flash" depends on BR2_BOOTSOURCE_FLASH config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD bool "Boot from an SD-Card" depends on BR2_BOOTSOURCE_SDCARD config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM bool "Boot from a serial EEPROM (Not yet supported)" depends on BR2_BOOTSOURCE_EEPROM endchoice config BR2_TARGET_UBOOT_BOOTSOURCE string depends on BR2_BOOTSOURCE default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM config BR2_TARGET_UBOOT_SILENT bool "silent console" help If the option has been enabled, the output can be silenced by setting the environment variable "silent". config BR2_TARGET_UBOOT_TOOL_MKIMAGE bool "mkimage tool in target" help Install mkimage tool in target. config BR2_TARGET_UBOOT_TOOL_ENV bool "fw_printenv tool in target" help Install fw_printenv / fw_setenv tools in target. menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV bool "Generate a default environment" help Will generate variables for factory default command and autoscript. if BR2_TARGET_UBOOT_DEFAULT_ENV choice prompt "SDRAM Memory size" default BR2_TARGET_UBOOT_SDRAM_SIZE_64M help Size of the onboard SDRAM config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB bool "256 MB" config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB bool "128 MB" config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB bool "64 MB" config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB bool "32 MB" config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB bool "16 MB" config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB bool "8 MB" endchoice config BR2_TARGET_UBOOT_MEMORY_SIZE string default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB choice prompt "Kernel Size" default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB bool "Kernel size is less than 1.25 MB" config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB bool "Kernel size is less than 1.50 MB" config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB bool "Kernel size is less than 1.75 MB" config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB bool "Kernel size is less than 2.00 MB" config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB bool "Kernel size is less than 2.25 MB" config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB bool "Kernel size is less than 2.50 MB" endchoice choice prompt "Dataflash Size" depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB bool "Dataflash size is 8 MB" config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB bool "Dataflash size is 4 MB" config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB bool "Dataflash size is 2 MB" config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB bool "Dataflash size is 1 MB" config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB bool "Dataflash size is 0.5 MB" config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB bool "Dataflash size is 0.25 MB" endchoice config BR2_TARGET_UBOOT_DATAFLASH_SIZE string depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB config BR2_TARGET_UBOOT_END_OF_FLASH string depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB help config BR2_TARGET_UBOOT_KERNEL_START string "Kernel SDRAM address" default "21000000" help Kernel is loaded to this address in SDRAM config BR2_TARGET_UBOOT_KERNEL_LOCATION string "Kernel flash address" depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \ BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default "" help Kernel location in dataflash config BR2_TARGET_UBOOT_FILESYSTEM_START string default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB help Kernel is loaded to this SDRAM address Assumes SDRAM starts at 20000000 Will need to be updated if the SDRAM is located elsewhere config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION string depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \ BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB help Determine location for File System in Dataflash This needs to be updated for other memory technologies config BR2_TARGET_UBOOT_FILESYSTEM_SIZE string "File System Size" default "6000000" help menuconfig BR2_TARGET_UBOOT_NETWORK bool "Network Settings" default y help Network settings for U-boot if BR2_TARGET_UBOOT_NETWORK config BR2_TARGET_UBOOT_SERVERIP string "server ip" default "10.175.196.221" help TFTP server ip address config BR2_TARGET_UBOOT_IPADDR string "ip address" default "10.175.196.18" help Target ip address config BR2_TARGET_UBOOT_GATEWAY string "gateway ip" default "10.175.196.1" help Gateway ip address config BR2_TARGET_UBOOT_NETMASK string "netmask" default "255.255.255.0" help Network Mask config BR2_TARGET_UBOOT_ETHADDR string "ethernet address" default "04:25:fe:ed:00:18" help Target MAC address for the ethernet interface. This should be changed for production units config BR2_TARGET_UBOOT_ETH1ADDR string "ethernet 2 address" depends on BR2_TARGET_AVR32 help Target MAC address for the second ethernet interface. endif # BR2_TARGET_UBOOT_NETWORK endif # BR2_TARGET_UBOOT_DEFAULT_ENV endif # BR2_TARGET_UBOOT config BR2_BOOTSOURCE_DATAFLASHCARD bool help Allow use of a dataflashcard as a boot source config BR2_BOOTSOURCE_DATAFLASH bool help Allow use of a dataflash as a boot source config BR2_BOOTSOURCE_NANDFLASH bool help Allow use of a NAND flash as a boot source config BR2_BOOTSOURCE_FLASH bool help Allow use of a flash RAM as a boot source config BR2_BOOTSOURCE_SDCARD bool help Allow use of an SD-card as a boot source config BR2_BOOTSOURCE_EEPROM bool help Allow use of a serial eeprom as a boot source config BR2_BOOTSOURCE bool default y if BR2_BOOTSOURCE_DATAFLASHCARD default y if BR2_BOOTSOURCE_DATAFLASH default y if BR2_BOOTSOURCE_NANDFLASH default y if BR2_BOOTSOURCE_FLASH default y if BR2_BOOTSOURCE_SDCARD default y if BR2_BOOTSOURCE_EEPROM