config BR2_TARGET_UBOOT
	bool "Das U-Boot Boot Monitor"
	depends on !BR2_TARGET_AT91
	help
	  Build "Das U-Boot" Boot Monitor

config BR2_TARGET_UBOOT_BOARDNAME
	string "board name"
	depends on BR2_TARGET_UBOOT
	default "$(BOARD_NAME)"
	help
	  One of U-Boot supported boards to be built.
	  This will be suffixed with _config to meet U-Boot standard naming.

config BR2_TARGET_UBOOT_CUSTOM_PATCH
	string "custom patch"
	depends on BR2_TARGET_UBOOT
	help
	  If your board requires a custom patch, add the path to the file here.
	  Most users may leave this empty

config BR2_TARGET_UBOOT_SERVERIP
	string "server ip"
	depends on BR2_TARGET_UBOOT
	default "10.175.196.221"
	help
	  TFTP server ip address

config BR2_TARGET_UBOOT_IPADDR
	string "ip address"
	depends on BR2_TARGET_UBOOT
	default "10.175.196.18"
	help
	  Target ip address

config BR2_TARGET_UBOOT_GATEWAY
	string "gateway ip"
	depends on BR2_TARGET_UBOOT
	default "10.175.196.1"
	help
	  Gateway ip address

config BR2_TARGET_UBOOT_NETMASK
	string "netmask"
	depends on BR2_TARGET_UBOOT
	default "255.255.255.0"
	help
	  Network Mask

config BR2_TARGET_UBOOT_ETHADDR
	string "ethernet address"
	depends on BR2_TARGET_UBOOT
	default "04:25:fe:ed:00:18"
	help
	  Target MAC address for the ethernet interface.
	  This should be changed for production units

config BR2_TARGET_UBOOT_ETH1ADDR
	string "ethernet 2 address"
	depends on BR2_TARGET_UBOOT
	depends on BR2_TARGET_AVR32
	help
	  Target MAC address for the second ethernet interface.

config BR2_TARGET_UBOOT_SILENT
	bool "silent console"
	depends on BR2_TARGET_UBOOT
	help
	  If the option has been enabled, the output can be
	  silenced by setting the environment variable "silent".

config BR2_TARGET_UBOOT_TOOL_MKIMAGE
	bool "mkimage tool in target"
	depends on BR2_TARGET_UBOOT
	help
	  Install mkimage tool in target.

config BR2_TARGET_UBOOT_TOOL_ENV
	bool "fw_printenv tool in target"
	depends on BR2_TARGET_UBOOT
	help
	  Install fw_printenv / fw_setenv tools in target.