config BR2_TARGET_CUSTOM_UBOOT
	bool
	help
	  A target can "select" this to disable
	  the build of vanilla u-boot.

menuconfig BR2_TARGET_UBOOT
	bool "Das U-Boot Boot Monitor"
	depends on !BR2_TARGET_CUSTOM_UBOOT
	help
	  Build "Das U-Boot" Boot Monitor

if BR2_TARGET_UBOOT
choice
	prompt "U-Boot Version"
	default BR2_TARGET_UBOOT_2009_01_RC1
	help
	  Select the specific Linux version you want to use
	
config BR2_TARGET_UBOOT_2009_01_RC1
	bool "u-boot-2009.01-rc1"
	depends on BR2_TARGET_UBOOT
	help
	  Use u-boot from December 2008 (RC1)

config BR2_TARGET_UBOOT_2008_10
	bool "u-boot-2008.10"
	depends on BR2_TARGET_UBOOT
	help
	  Use u-boot from October 2008
	
config BR2_TARGET_UBOOT_1_3_4
	bool "u-boot-1.3.4"
	depends on BR2_TARGET_UBOOT
	help
	  Use u-boot from mid 2008
	
config BR2_TARGET_UBOOT_2009_01
	bool "u-boot-2009.01"
	depends on BR2_TARGET_UBOOT
	help
	  Use u-boot from January 2009
	  Release date 2009-01-17

endchoice

config BR2_UBOOT_VERSION
	string
	default "2009.01-rc1"	if BR2_TARGET_UBOOT_2009_01_RC1
	default "2008.10"	if BR2_TARGET_UBOOT_2008_10
	default "1.3.4"		if BR2_TARGET_UBOOT_1_3_4
	default "2009.01"	if BR2_TARGET_UBOOT_2009_01

config BR2_TARGET_UBOOT_BOARDNAME
	string "board name"
	depends on BR2_TARGET_UBOOT
	default "$(BOARD_NAME)"
	help
	  One of U-Boot supported boards to be built.
	  This will be suffixed with _config to meet U-Boot standard naming.

config BR2_TARGET_UBOOT_CUSTOM_PATCH
	string "custom patch"
	depends on BR2_TARGET_UBOOT
	help
	  If your board requires a custom patch, add the path to the file here.
	  Most users may leave this empty

choice
	prompt "Bootsource"
	depends on BR2_BOOTSOURCE
	default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD

	config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
	bool "Boot from dataflashcard"
	depends on BR2_BOOTSOURCE_DATAFLASHCARD
	help
	  

	config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
	bool "Boot from dataflash
	depends on BR2_BOOTSOURCE_DATAFLASH
	help
	  

	config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
	bool "Boot from a NAND flash"
	depends on BR2_BOOTSOURCE_NANDFLASH
	help
	  Build u-boot with environment in the NAND flash

	config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
	bool "Boot from a parallell flash"
	depends on BR2_BOOTSOURCE_FLASH
	help
	  Build u-boot with environment in a flash RAM

	config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
	bool "Boot from a NAND flash"
	depends on BR2_BOOTSOURCE_SDCARD
	help
	  Build u-boot with environment on an SD-Card
	  Not yet supported

	config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
	bool "Boot from a serial EEPROM"
	depends on BR2_BOOTSOURCE_EEPROM
	help
	  Build u-boot with environment in a serial EEPROM
	  Not yet supported


endchoice

config BR2_TARGET_UBOOT_BOOTSOURCE
	string
	depends on BR2_BOOTSOURCE
	default "dataflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
	default "dataflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
	default "nandflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
	default "flash"		if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
	default "sdcard"	if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
	default "eeprom"	if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM

config BR2_TARGET_UBOOT_SERVERIP
	string "server ip"
	depends on BR2_TARGET_UBOOT
	default "10.175.196.221"
	help
	  TFTP server ip address

config BR2_TARGET_UBOOT_IPADDR
	string "ip address"
	depends on BR2_TARGET_UBOOT
	default "10.175.196.18"
	help
	  Target ip address

config BR2_TARGET_UBOOT_GATEWAY
	string "gateway ip"
	depends on BR2_TARGET_UBOOT
	default "10.175.196.1"
	help
	  Gateway ip address

config BR2_TARGET_UBOOT_NETMASK
	string "netmask"
	depends on BR2_TARGET_UBOOT
	default "255.255.255.0"
	help
	  Network Mask

config BR2_TARGET_UBOOT_ETHADDR
	string "ethernet address"
	depends on BR2_TARGET_UBOOT
	default "04:25:fe:ed:00:18"
	help
	  Target MAC address for the ethernet interface.
	  This should be changed for production units

config BR2_TARGET_UBOOT_ETH1ADDR
	string "ethernet 2 address"
	depends on BR2_TARGET_UBOOT
	depends on BR2_TARGET_AVR32
	help
	  Target MAC address for the second ethernet interface.

config BR2_TARGET_UBOOT_SILENT
	bool "silent console"
	depends on BR2_TARGET_UBOOT
	help
	  If the option has been enabled, the output can be
	  silenced by setting the environment variable "silent".

config BR2_TARGET_UBOOT_TOOL_MKIMAGE
	bool "mkimage tool in target"
	depends on BR2_TARGET_UBOOT
	help
	  Install mkimage tool in target.

config BR2_TARGET_UBOOT_TOOL_ENV
	bool "fw_printenv tool in target"
	depends on BR2_TARGET_UBOOT
	help
	  Install fw_printenv / fw_setenv tools in target.
endif

config BR2_BOOTSOURCE_DATAFLASHCARD
	bool
	help
	  Allow use of a dataflashcard as a boot source

config BR2_BOOTSOURCE_DATAFLASH
	bool
	help
	  Allow use of a dataflash as a boot source

config BR2_BOOTSOURCE_NANDFLASH
	bool
	help
	  Allow use of a NAND flash as a boot source

config BR2_BOOTSOURCE_FLASH
	bool
	help
	  Allow use of a flash RAM as a boot source

config BR2_BOOTSOURCE_SDCARD
	bool
	help
	  Allow use of an SD-card as a boot source

config BR2_BOOTSOURCE_EEPROM
	bool
	help
	  Allow use of a serial eeprom as a boot source

config	BR2_BOOTSOURCE
	bool
	default y if BR2_BOOTSOURCE_DATAFLASHCARD
	default y if BR2_BOOTSOURCE_DATAFLASH
	default y if BR2_BOOTSOURCE_NANDFLASH
	default y if BR2_BOOTSOURCE_FLASH
	default y if BR2_BOOTSOURCE_SDCARD
	default y if BR2_BOOTSOURCE_EEPROM
	default n