#############################################################
#
# Linux kernel 2.6 target
#
#############################################################
ifneq ($(filter $(TARGETS),linux26),)


ifeq ($(DOWNLOAD_LINUX26_VERSION),)
# User did not define linux version, try using headers
ifeq ($(LINUX_HEADERS_VERSION),)
# We did not have headers (this is for real???)
# Version of linuc before patches
DOWNLOAD_LINUX26_VERSION=2.6.22.1
# Version of Linux after applying any patches
LINUX26_VERSION=2.6.22.1
else
# OK, we have headers, use them...
DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
endif
endif

LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
LINUX26_BZCAT:=$(BZCAT)
LINUX26_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6

ifeq ($(BOARD_PATH),)
BOARD_PATH:=$(strip $(subst ",,$(BR2_BOARD_PATH)))
#"))
endif

# Linux kernel configuration file
# Has to be set by the target/device
# If it is not set by the target/device, then pick the one from .config
ifndef LINUX26_KCONFIG
ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG))),)
LINUX26_KCONFIG=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG)))
#"))
#"))
else
# LINUX26_KCONFIG=$(BOARD_PATH)/linux26.config
endif
endif

ifndef LINUX26_FORMAT
ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT))),)
LINUX26_FORMAT=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT)))
#"))
#"))
else
LINUX26_FORMAT=zImage
endif
endif

# Has to be set by the target/device
ifndef LINUX26_BINLOC
# default:
ifeq ($(LINUX26_FORMAT),vmlinux)
LINUX26_BINLOC=$(LINUX26_FORMAT)
else
LINUX26_BINLOC=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
endif
endif

# File name for the Linux kernel binary
ifndef LINUX26_KERNEL
LINUX26_KERNEL=$(BINARIES_DIR)/linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
endif

# Version of Linux AFTER patches
LINUX26_DIR=$(PROJECT_BUILD_DIR)/linux-$(LINUX26_VERSION)

# for packages that need it
LINUX_VERSION:=$(LINUX26_VERSION)
LINUX_DIR=$(LINUX26_DIR)
LINUX_KERNEL=$(LINUX26_KERNEL)

# kernel patches
ifeq ($(strip $(LINUX26_PATCH_DIR)),)
ifneq ($(BOARD_PATH),)
LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches/
#"))
endif
endif
__LINUX26_NO_PIC=-fPIC -fpic -DPIC -fwrapv -ftrapv
LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \
	ARCH=$(KERNEL_ARCH) \
	CFLAGS_KERNEL="$(filter-out $(__LINUX26_NO_PIC),$(TARGET_CFLAGS))" \
	INSTALL_MOD_PATH=$(TARGET_DIR) \
	CROSS_COMPILE=$(KERNEL_CROSS) \
	LDFLAGS="$(TARGET_LDFLAGS)" \
	LZMA="$(LZMA)" 

$(LINUX26_KCONFIG):
	@if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
		echo ""; \
		echo "You should create a .config for your kernel"; \
		echo "and install it as $(LINUX26_KCONFIG)"; \
		echo ""; \
		sleep 5; \
	fi

ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
$(DL_DIR)/$(LINUX26_SOURCE):
	 $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))

$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
	rm -rf $(LINUX26_DIR)
	@echo "*** Unpacking kernel source"
	$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
	# Rename the dir from the downloaded version to the AFTER patch version
	mv -f $(PROJECT_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
endif
	touch $@

$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS)
	toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \
		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
ifeq ($(BR2_KERNEL_HEADERS_IPMI),y)
	toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers/ipmi \
		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
endif
ifeq ($(BR2_KERNEL_HEADERS_LZMA),y)
	toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers/lzma \
		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
endif
ifeq ($(BR2_KERNEL_HEADERS_RT),y)
	toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE)
endif
ifeq ($(BR2_KERNEL_HEADERS_PATCH_DIR),y)
	toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \
		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
endif
ifeq ($(BR2_PACKAGE_OPENSWAN),y)
	toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \
		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
endif
ifneq ($(LINUX26_PATCH_DIR),)
	if [ -d $(LINUX26_PATCH_DIR) ] ; then \
		toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) linux-$(LINUX26_VERSION)\*.patch ; \
	fi
endif
	touch $@

$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
	cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
	$(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
ifeq ($(BR2_ARM_EABI),y)
	echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
	$(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
	echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
else
	echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
endif
	$(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config
ifeq ($(BR2_INET_IPV6),y)
	echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config
else
	echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config
endif
	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
	echo "CONFIG_INITRAMFS_SOURCE=\"$(INITRAMFS_TARGET)\"" >> \
		$(LINUX26_DIR)/.config
	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
else
	echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config
endif
ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
	# precedence for a small initramfs
	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
	echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \
		$(LINUX26_DIR)/.config
	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
endif
	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
	touch $@

$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
	touch $@

$(LINUX26_KERNEL): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \
		$(LINUX26_DIR)/.depend_done
	$(MAKE) $(LINUX26_MAKE_FLAGS) \
		-C $(LINUX26_DIR) $(LINUX26_FORMAT)
	cp -dpf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
	touch -c $@

$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_DIR)/.configured
	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
	rm -f $(TARGET_DIR)/sbin/cardmgr
	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/source
	$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX_HEADERS_VERSION)
	touch -c $@

linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed
	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured

linux26-xconfig: $(LINUX26_DIR)/.patched host-sed
	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured

linux26: $(LINUX26_KERNEL)

$(LINUX26_DIR)/.modules_installed: $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
	touch $@

linux26-modules: cross-depmod26 $(LINUX26_DIR)/.modules_installed

linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)

linux26-unpacked: $(LINUX26_DIR)/.patched

linux26-config: host-sed $(LINUX26_DIR)/.configured

linux26-update:
	cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)

# This has been renamed so we do _NOT_ by default run this on 'make clean'
linux26clean:
	rm -f $(LINUX26_KERNEL) $(LINUX26_DIR)/.configured
	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean

linux26-dirclean:
	rm -rf $(LINUX26_DIR)

endif