# /etc/inittab # # Copyright (C) 2001 Erik Andersen # # Note: BusyBox init doesn't support runlevels. The runlevels field is # completely ignored by BusyBox init. If you want runlevels, use # sysvinit. # # Format for each entry: ::: # # id == tty to run on, or empty for /dev/console # runlevels == ignored # action == one of sysinit, respawn, askfirst, wait, and once # process == program to run # Startup the system ::sysinit:/bin/mount -t proc none /proc ::sysinit:/bin/mount -t sysfs none /sys ::sysinit:/bin/mount -t tmpfs -o size=64k,mode=0755 none /dev ::sysinit:/bin/mkdir /dev/pts ::sysinit:/bin/mount -t devpts devpts /dev/pts ::sysinit:/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug ::sysinit:/sbin/mdev -s ::sysinit:/bin/mount -o remount,rw / ::sysinit:/bin/mount -a ::sysinit:/bin/hostname -F /etc/hostname ::sysinit:/sbin/ifconfig lo 127.0.0.1 up ::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo # now run any rc scripts ::sysinit:/etc/init.d/rcS # Set up a couple of getty's tty1::respawn:/sbin/getty 38400 tty1 tty2::respawn:/sbin/getty 38400 tty2 # Put a getty on the serial port #ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 # GENERIC_SERIAL # Logging junk null::sysinit:/bin/touch /var/log/messages null::respawn:/sbin/syslogd -n null::respawn:/sbin/klogd -n tty3::respawn:/usr/bin/tail -f /var/log/messages # Stuff to do for the 3-finger salute ::ctrlaltdel:/sbin/reboot # Stuff to do before rebooting null::shutdown:/usr/bin/killall klogd null::shutdown:/usr/bin/killall syslogd null::shutdown:/bin/umount -a -r null::shutdown:/sbin/swapoff -a