# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels.  The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id        == tty to run on, or empty for /dev/console
# runlevels == ignored
# action    == one of sysinit, respawn, askfirst, wait, and once
# process   == program to run

# Startup the system
::sysinit:/bin/mount -t proc none /proc
::sysinit:/bin/mount -t sysfs none /sys
::sysinit:/bin/mount -t tmpfs -o size=64k,mode=0755 none /dev
::sysinit:/bin/mkdir /dev/pts
::sysinit:/bin/mount -t devpts devpts /dev/pts
::sysinit:/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
::sysinit:/sbin/mdev -s
::sysinit:/bin/mount -o remount,rw /
::sysinit:/bin/mount -a
::sysinit:/bin/hostname -F /etc/hostname
::sysinit:/sbin/ifconfig lo 127.0.0.1 up
::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
# now run any rc scripts
::sysinit:/etc/init.d/rcS

# Set up a couple of getty's
tty1::respawn:/sbin/getty 38400 tty1
tty2::respawn:/sbin/getty 38400 tty2
#ttyAMA0::respawn:/sbin/getty -L ttyAMA0 115200 vt100

# Put a getty on the serial port
#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100

# Logging junk
null::sysinit:/bin/touch /var/log/messages
null::respawn:/sbin/syslogd -n
null::respawn:/sbin/klogd -n
tty3::respawn:/usr/bin/tail -f /var/log/messages

# Stuff to do for the 3-finger salute
::ctrlaltdel:/sbin/reboot

# Stuff to do before rebooting
null::shutdown:/usr/bin/killall klogd
null::shutdown:/usr/bin/killall syslogd
null::shutdown:/bin/umount -a -r
null::shutdown:/sbin/swapoff -a