diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c
--- linux-2.4.31.org/drivers/net/au1000_eth.c	2005-01-19 09:09:56.000000000 -0500
+++ linux-2.4.31/drivers/net/au1000_eth.c	2005-08-22 12:24:31.000000000 -0400
@@ -595,6 +595,97 @@
 	return 0;
 }
 
+int ns_83847_reset(struct net_device *dev, int phy_addr)
+ {
+       s16 mii_control, timeout;
+
+ //    printk("ns_reset\n");
+       mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
+       mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
+       mdelay(1);
+       for (timeout = 100; timeout > 0; --timeout) {
+               mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
+               if ((mii_control & MII_CNTL_RESET) == 0)
+                       break;
+               mdelay(1);
+       }
+       if (mii_control & MII_CNTL_RESET) {
+               printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
+               return -1;
+       }
+       return 0;
+ }
+
+int ns_83847_init(struct net_device *dev, int phy_addr)
+ {
+      s16 data;
+ //    printk("ns_init\n");
+
+       /* Stop auto-negotiation */
+ //    data = mdio_read(dev, phy_addr, MII_CONTROL);
+ //    mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
+ //    mdio_write(dev, phy_addr,    0, 0x0000);
+       mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
+
+       /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
+       data = mdio_read(dev, phy_addr, MII_ANADV);
+       /* obs PAUSE bit */
+       data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
+       mdio_write(dev, phy_addr, MII_ANADV, data);
+
+       /* Bypass led stretching? */
+       data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
+       data |= MII_NS_PHYCTRL_BP_STRETCH;
+       mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
+
+       /* Restart auto-negotiation */
+       data = mdio_read(dev, phy_addr, MII_CONTROL);
+       data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
+       mdio_write(dev, phy_addr, MII_CONTROL, data);
+
+       return 0;
+ }
+
+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
+ {
+       u16 mii_data;
+       struct au1000_private *aup;
+
+       if (!dev) {
+               printk(KERN_ERR "ns_83847_status error: NULL dev\n");
+               return -1;
+       }
+       aup = (struct au1000_private *) dev->priv;
+
+       mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
+ //    printk("ns_status: %04x\n", mii_data);
+       if (mii_data & MII_STAT_LINK) {
+               *link = 1;
+               mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
+               if (mii_data & MII_NS_PHYSTS_SPEED_10) {
+                       *speed = IF_PORT_10BASET;
+                       dev->if_port = IF_PORT_10BASET;
+               }
+               else  {
+                       if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
+                               *speed = IF_PORT_100BASEFX;
+                               dev->if_port = IF_PORT_100BASEFX;
+                       }
+                       else {
+                               *speed = IF_PORT_100BASETX;
+                               dev->if_port = IF_PORT_100BASETX;
+                       }
+               }
+
+       }
+       else {
+               *link = 0;
+               *speed = 0;
+               dev->if_port = IF_PORT_UNKNOWN;
+       }
+       return 0;
+ }
+
 #ifdef CONFIG_MIPS_BOSPORUS
 int stub_init(struct net_device *dev, int phy_addr)
 {
@@ -620,6 +711,12 @@
 }
 #endif
 
+struct phy_ops ns_83847_ops = {
+       ns_83847_init,
+       ns_83847_reset,
+       ns_83847_status,
+};
+
 struct phy_ops bcm_5201_ops = {
 	bcm_5201_init,
 	bcm_5201_reset,
@@ -679,6 +776,7 @@
 	{"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
 	{"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0},
 	{"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0},
+	{"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
 #ifdef CONFIG_MIPS_BOSPORUS
 	{"Stub", 0x1234, 0x5678, &stub_ops },
 #endif
@@ -872,6 +970,8 @@
 			}
 		}
 	}
+	printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
+	return -1;
 found:
 
 #ifdef CONFIG_MIPS_BOSPORUS
diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h
--- linux-2.4.31.org/drivers/net/au1000_eth.h	2004-02-18 08:36:31.000000000 -0500
+++ linux-2.4.31/drivers/net/au1000_eth.h	2005-08-22 12:31:37.000000000 -0400
@@ -86,6 +86,27 @@
 #define MII_STAT_CAN_TX_FDX 0x4000
 #define	MII_STAT_CAN_T4     0x8000
 
+/* mii registers for NS 83847 */
+#define MII_NS_PHYSTS   0x10
+#define MII_NS_FCSCR    0x14
+#define MII_NS_RECR     0x15
+#define MII_NS_PCSR     0x16
+#define MII_NS_PHYCTRL  0x19
+#define MII_NS_10BTSCR  0x1a
+#define MII_NS_CDCTRL   0x1b
+
+/* MII_NS_PHYSTS bits */
+#define MII_NS_PHYSTS_LINK            (1)
+#define MII_NS_PHYSTS_SPEED_10        (1<<1)
+#define MII_NS_PHYSTS_DUPLEX_FULL     (1<<2)
+
+/* MII_NS_PHYCTRL bits */
+#define MII_NS_PHYCTRL_BP_STRETCH     (1<<8)
+
+/* MII_NS_CDCTRL bits */
+#define MII_NS_CDCTRL_CD_ENABLE       (1<<15)
+#define MII_NS_CDCTRL_RISETIME        (1<<11)
+#define MII_NS_CDCTRL_FALLTIME        (1<<9)
 
 #define		MII_ID1_OUI_LO		0xFC00	/* low bits of OUI mask */
 #define		MII_ID1_MODEL		0x03F0	/* model number */