# *******************************************************************

ifeq ($(strip $(BR2_TARGET_ATMEL)),y)
ATMEL_PATH:=target/device/Atmel

BOARD_NAME:=$(strip $(subst ",, $(BR2_BOARD_NAME)))
#"))
BOARD_PATH:=$(strip $(subst ",, $(BR2_BOARD_PATH)))
#"))

ATMEL_TARGET:=$(ATMEL_PATH)/root
TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton
TARGET_DEVICE_TABLE:=$(ATMEL_TARGET)/device_table.txt
TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz

TARGET_ATMEL_COPYTO:=$(strip $(subst ",, $(BR2_TARGET_ATMEL_COPYTO)))

# These are set by Config.in
DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
#"))
ifeq ($(DOWNLOAD_LINUX26_VERSION),)
DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
endif

LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
#"))
ifeq ($(LINUX26_VERSION),)
LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
endif

LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
#"))
LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
#"))

# These are set by "new" Config.in
LINUX26_KCONFIG:=$(BOARD_PATH)/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config

# This should be part of target/linux/Makefile.in
LINUX26_BUILD_DIR:=$(PROJECT_BUILD_DIR)

#LINUX26_BINLOC=$(LINUX26_FORMAT)
#LINUX26_BINLOC:=$(BINARIES_DIR)/$(LINUX26_KERNEL)

LINUX26_COPYTO:=/tftpboot

ifeq ($(DEFAULT_KERNEL_HEADERS),2.6.22.1)
KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/linux/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
else
# Patch during kernel header build
ifeq ($(BR2_avr32),y)
KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-avr32/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
endif
# Patch during kernel build
ifeq ($(BR2_arm),y)
#LINUX26_PATCH_DIR:=target/device/Atmel/arch-at91/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-arm/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
endif
endif

# The board specific Makefile.in can redefine BOARD_NAME's
LINUX_BOARD_NAME:=$(BOARD_NAME)
UBOOT_BOARD_NAME:=$(BOARD_NAME)
DFB_BOARD_NAME:=$(BOARD_NAME)

BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config

LINUX26_KERNEL=$(BINARIES_DIR)/$(PROJECT)-linux-$(LINUX26_VERSION)

# Update things in board specific makefiles
include target/device/Atmel/*/Makefile.in

# Needs to be AFTER board specific Makefiles

UBOOT_CONFIG:=$(UBOOT_BOARD_NAME)_config
UBOOT_CONFIG_FILE:=$(BOARD_PATH)/u-boot/$(UBOOT_BOARD_NAME).h

ifeq ($(strip $(BR2_PACKAGE_LINUX)),y)
include $(ATMEL_PATH)/linux/linux.mk
endif

ifeq ($(strip $(BR2_TARGET_UBOOT)),y)
include $(ATMEL_PATH)/u-boot/u-boot.mk
endif

ifeq ($(strip $(BR2_TARGET_DATAFLASHBOOT)),y)
include $(ATMEL_PATH)/DataFlashBoot/DataflashBoot.mk
endif

ifeq ($(strip $(BR2_TARGET_AT91BOOTSTRAP)),y)
include $(ATMEL_PATH)/at91bootstrap/at91bootstrap.mk
endif

atmel_status:
	@echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR)
	@echo BOARD_NAME=$(BOARD_NAME)
	@echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
	@echo BR2_MAJOR_MINOR=$(BR2_LINUX_MAJOR_VERSION)$(BR2_LINUX_MINOR_VERSION)
	@echo MAJOR_MINOR=$(LINUX_MAJOR_VER)$(LINUX_MINOR_VER)
	@echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
	@echo LINUX_SOURCE=$(LINUX_SOURCE)
	@echo TARGETS=$(TARGETS)
	@echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR)

#TARGETS+=atmel_status
endif