From b32a95eced1d0f22be1751467ff365117e200f3f Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Sun, 29 Jul 2007 07:17:01 +0000 Subject: Add atngw100 target --- target/device/Atmel/atngw100/Makefile.in | 12 + .../Atmel/atngw100/atngw100-linux-2.6.22.config | 1169 ++ target/device/Atmel/atngw100/atngw100_defconfig | 452 + target/device/Atmel/atngw100/busybox-1.6.1.config | 719 + target/device/Atmel/atngw100/device_table.txt | 180 + .../linux-2.6.22-atmel.3-avr32-updates.patch | 14834 +++++++++++++++++++ .../device/Atmel/atngw100/target_skeleton/etc/TZ | 1 + .../atngw100/target_skeleton/etc/default/ntpdate | 6 + .../atngw100/target_skeleton/etc/dnsmasq.conf | 447 + .../Atmel/atngw100/target_skeleton/etc/ethers | 0 .../Atmel/atngw100/target_skeleton/etc/fstab | 3 + .../Atmel/atngw100/target_skeleton/etc/group | 18 + .../Atmel/atngw100/target_skeleton/etc/hostname | 1 + .../Atmel/atngw100/target_skeleton/etc/hosts | 11 + .../atngw100/target_skeleton/etc/hosts.dnsmasq | 246 + .../Atmel/atngw100/target_skeleton/etc/httpd.conf | 6 + .../Atmel/atngw100/target_skeleton/etc/inetd.conf | 4 + .../atngw100/target_skeleton/etc/init.d/K70sendsig | 0 .../atngw100/target_skeleton/etc/init.d/K80netfs | 0 .../atngw100/target_skeleton/etc/init.d/K85network | 11 + .../atngw100/target_skeleton/etc/init.d/K90localfs | 0 .../target_skeleton/etc/init.d/S00mountvirtfs | 75 + .../atngw100/target_skeleton/etc/init.d/S01hotplug | 14 + .../target_skeleton/etc/init.d/S02hostname | 47 + .../atngw100/target_skeleton/etc/init.d/S08syslog | 24 + .../atngw100/target_skeleton/etc/init.d/S09klog | 16 + .../target_skeleton/etc/init.d/S10modules-init | 21 + .../atngw100/target_skeleton/etc/init.d/S15localfs | 11 + .../atngw100/target_skeleton/etc/init.d/S20network | 11 + .../atngw100/target_skeleton/etc/init.d/S21dnsmasq | 18 + .../target_skeleton/etc/init.d/S22iptables | 43 + .../atngw100/target_skeleton/etc/init.d/S40telnetd | 16 + .../atngw100/target_skeleton/etc/init.d/S41inetd | 16 + .../atngw100/target_skeleton/etc/init.d/S42httpd | 16 + .../atngw100/target_skeleton/etc/init.d/S43ntp | 27 + .../atngw100/target_skeleton/etc/init.d/S49netfs | 11 + .../atngw100/target_skeleton/etc/init.d/S99gpio | 142 + .../Atmel/atngw100/target_skeleton/etc/init.d/rcK | 6 + .../Atmel/atngw100/target_skeleton/etc/init.d/rcS | 9 + .../Atmel/atngw100/target_skeleton/etc/inittab | 25 + .../Atmel/atngw100/target_skeleton/etc/modules | 0 .../device/Atmel/atngw100/target_skeleton/etc/mtab | 1 + .../target_skeleton/etc/network/interfaces | 15 + .../Atmel/atngw100/target_skeleton/etc/ntp.conf | 49 + .../Atmel/atngw100/target_skeleton/etc/passwd | 18 + .../Atmel/atngw100/target_skeleton/etc/protocols | 149 + .../Atmel/atngw100/target_skeleton/etc/resolv.conf | 1 + .../atngw100/target_skeleton/etc/samba/smb.conf | 281 + .../atngw100/target_skeleton/etc/samba/smbpasswd | 1 + .../Atmel/atngw100/target_skeleton/etc/services | 2117 +++ .../Atmel/atngw100/target_skeleton/etc/shells | 8 + .../usr/share/udhcpc/default.script | 19 + 52 files changed, 21327 insertions(+) create mode 100644 target/device/Atmel/atngw100/Makefile.in create mode 100644 target/device/Atmel/atngw100/atngw100-linux-2.6.22.config create mode 100644 target/device/Atmel/atngw100/atngw100_defconfig create mode 100644 target/device/Atmel/atngw100/busybox-1.6.1.config create mode 100644 target/device/Atmel/atngw100/device_table.txt create mode 100644 target/device/Atmel/atngw100/kernel-patches/linux-2.6.22-atmel.3-avr32-updates.patch create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/TZ create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/default/ntpdate create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/dnsmasq.conf create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/ethers create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/fstab create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/group create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/hostname create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/hosts create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/hosts.dnsmasq create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/httpd.conf create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/inetd.conf create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/K70sendsig create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/K80netfs create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/K85network create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/K90localfs create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S00mountvirtfs create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S01hotplug create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S02hostname create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S08syslog create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S09klog create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S10modules-init create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S15localfs create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S20network create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S21dnsmasq create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S22iptables create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S40telnetd create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S41inetd create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S42httpd create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S43ntp create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S49netfs create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/S99gpio create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/rcK create mode 100755 target/device/Atmel/atngw100/target_skeleton/etc/init.d/rcS create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/inittab create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/modules create mode 120000 target/device/Atmel/atngw100/target_skeleton/etc/mtab create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/network/interfaces create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/ntp.conf create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/passwd create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/protocols create mode 120000 target/device/Atmel/atngw100/target_skeleton/etc/resolv.conf create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/samba/smb.conf create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/samba/smbpasswd create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/services create mode 100644 target/device/Atmel/atngw100/target_skeleton/etc/shells create mode 100755 target/device/Atmel/atngw100/target_skeleton/usr/share/udhcpc/default.script (limited to 'target') diff --git a/target/device/Atmel/atngw100/Makefile.in b/target/device/Atmel/atngw100/Makefile.in new file mode 100644 index 000000000..2f304f14d --- /dev/null +++ b/target/device/Atmel/atngw100/Makefile.in @@ -0,0 +1,12 @@ +ATNGW100_PATH=target/device/Atmel/atngw100 + +#BR2_PACKAGE_BUSYBOX_CONFIG=$(ATNGW100_PATH)/busybox.config +#UCLIBC_CONFIG_FILE=target/device/Atmel/uClibc.config.$(ARCH) + +TARGET_SKELETON=$(ATNGW100_PATH)/target_skeleton +TARGET_DEVICE_TABLE=$(ATNGW100_PATH)/device_table.txt + +ifeq ($(strip $(BR2_PACKAGE_LINUX)),y) +#LINUX26_FORMAT=uImage +#LINUX26_KCONFIG=$(ATNGW100_PATH)/linux26.config +endif diff --git a/target/device/Atmel/atngw100/atngw100-linux-2.6.22.config b/target/device/Atmel/atngw100/atngw100-linux-2.6.22.config new file mode 100644 index 000000000..01636c269 --- /dev/null +++ b/target/device/Atmel/atngw100/atngw100-linux-2.6.22.config @@ -0,0 +1,1169 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22 +# Fri Jul 27 14:51:48 2007 +# +CONFIG_AVR32=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_TIME=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type and features +# +CONFIG_SUBARCH_AVR32B=y +CONFIG_MMU=y +CONFIG_PERFORMANCE_COUNTERS=y +CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP7000=y +# CONFIG_BOARD_ATSTK1000 is not set +CONFIG_BOARD_ATNGW100=y +# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set +CONFIG_LOADER_U_BOOT=y + +# +# Atmel AVR32 AP options +# +# CONFIG_AP7000_32_BIT_SMC is not set +CONFIG_AP7000_16_BIT_SMC=y +# CONFIG_AP7000_8_BIT_SMC is not set +CONFIG_GPIO_DEV=y +CONFIG_LOAD_ADDRESS=0x10000000 +CONFIG_ENTRY_ADDRESS=0x90000000 +CONFIG_PHYS_OFFSET=0x10000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set +# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set +# CONFIG_NEED_NODE_MEMMAP_SIZE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +# CONFIG_OWNERSHIP_TRACE is not set +CONFIG_DW_DMAC=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_CMDLINE="" + +# +# Power managment options +# + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=y +CONFIG_INET6_TUNNEL=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +# CONFIG_NF_CT_PROTO_SCTP is not set +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x80000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_ATMEL_SSC is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT32AP700X_WDT=y +CONFIG_AT32AP700X_WDT_TIMEOUT=2 +# CONFIG_HW_RANDOM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_ATMELTWI=m +CONFIG_I2C_ATMELTWI_BAUDRATE=100000 +CONFIG_I2C_GPIO=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_SPIDEV=m + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_USB_ATMEL_USBA=y +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_ATMELMCI=y + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT32AP700X=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_KPROBES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/target/device/Atmel/atngw100/atngw100_defconfig b/target/device/Atmel/atngw100/atngw100_defconfig new file mode 100644 index 000000000..2f96bf6d8 --- /dev/null +++ b/target/device/Atmel/atngw100/atngw100_defconfig @@ -0,0 +1,452 @@ +# +# Automatically generated make config: don't edit +# +BR2_HAVE_DOT_CONFIG=y +# BR2_alpha is not set +# BR2_arm is not set +# BR2_armeb is not set +BR2_avr32=y +# BR2_cris is not set +# BR2_i386 is not set +# BR2_m68k is not set +# BR2_mips is not set +# BR2_mipsel is not set +# BR2_nios2 is not set +# BR2_powerpc is not set +# BR2_sh is not set +# BR2_sh64 is not set +# BR2_sparc is not set +# BR2_x86_64 is not set +BR2_ap7000=y +# BR2_ap7010 is not set +# BR2_ap7020 is not set +BR2_ARCH="avr32" +BR2_ENDIAN="BIG" + +# +# Build options +# +BR2_WGET="wget --passive-ftp" +BR2_SVN="svn co" +BR2_ZCAT="zcat" +BR2_BZCAT="bzcat" +BR2_TAR_OPTIONS="" +BR2_DL_DIR="$(BASE_DIR)/src/dl" +BR2_SOURCEFORGE_MIRROR="easynews" +BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/" +BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir" +BR2_TOPDIR_PREFIX="" +BR2_TOPDIR_SUFFIX="" +BR2_GNU_BUILD_SUFFIX="pc-linux-gnu" +BR2_GNU_TARGET_SUFFIX="linux-uclibc" +BR2_JLEVEL=1 +# BR2_PREFER_IMA is not set +# BR2_DEPRECATED is not set +BR2_TOOLCHAIN_BUILDROOT=y +# BR2_TOOLCHAIN_EXTERNAL is not set + +# +# Toolchain Options +# + +# +# Kernel Header Options +# +# BR2_KERNEL_HEADERS_2_4_25 is not set +# BR2_KERNEL_HEADERS_2_4_27 is not set +# BR2_KERNEL_HEADERS_2_4_29 is not set +# BR2_KERNEL_HEADERS_2_4_31 is not set +# BR2_KERNEL_HEADERS_2_6_9 is not set +# BR2_KERNEL_HEADERS_2_6_11 is not set +# BR2_KERNEL_HEADERS_2_6_12 is not set +# BR2_KERNEL_HEADERS_2_6_19_2 is not set +# BR2_KERNEL_HEADERS_2_6_20 is not set +BR2_KERNEL_HEADERS_2_6_21=y +BR2_DEFAULT_KERNEL_HEADERS="2.6.21.3" + +# +# uClibc Options +# +# BR2_UCLIBC_VERSION_0_9_28 is not set +BR2_UCLIBC_VERSION_0_9_28_3=y +# BR2_UCLIBC_VERSION_SNAPSHOT is not set +# BR2_ENABLE_LOCALE is not set +# BR2_PTHREADS_NONE is not set +# BR2_PTHREADS is not set +BR2_PTHREADS_OLD=y +# BR2_PTHREADS_NATIVE is not set +BR2_PTHREAD_DEBUG=y + +# +# Binutils Options +# +# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set +# BR2_BINUTILS_VERSION_2_15 is not set +# BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set +# BR2_BINUTILS_VERSION_2_16_1 is not set +# BR2_BINUTILS_VERSION_2_16_90_0_3 is not set +# BR2_BINUTILS_VERSION_2_16_91_0_5 is not set +# BR2_BINUTILS_VERSION_2_16_91_0_6 is not set +# BR2_BINUTILS_VERSION_2_16_91_0_7 is not set +BR2_BINUTILS_VERSION_2_17=y +# BR2_BINUTILS_VERSION_2_17_50_0_2 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_3 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_4 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_5 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_6 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_7 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_8 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_9 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_10 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_12 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_14 is not set +BR2_BINUTILS_VERSION="2.17" +BR2_EXTRA_BINUTILS_CONFIG_OPTIONS="" + +# +# Gcc Options +# +# BR2_GCC_VERSION_3_3_5 is not set +# BR2_GCC_VERSION_3_3_6 is not set +# BR2_GCC_VERSION_3_4_2 is not set +# BR2_GCC_VERSION_3_4_3 is not set +# BR2_GCC_VERSION_3_4_4 is not set +# BR2_GCC_VERSION_3_4_5 is not set +# BR2_GCC_VERSION_3_4_6 is not set +# BR2_GCC_VERSION_4_0_0 is not set +# BR2_GCC_VERSION_4_0_1 is not set +# BR2_GCC_VERSION_4_0_2 is not set +# BR2_GCC_VERSION_4_0_3 is not set +# BR2_GCC_VERSION_4_0_4 is not set +# BR2_GCC_VERSION_4_1_0 is not set +# BR2_GCC_VERSION_4_1_1 is not set +BR2_GCC_VERSION_4_1_2=y +# BR2_GCC_VERSION_4_2 is not set +BR2_GCC_VERSION="4.1.2" +# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set +BR2_GCC_AVR32_CONFIGURATION=y +BR2_EXTRA_GCC_CONFIG_OPTIONS="" +BR2_INSTALL_LIBSTDCPP=y +# BR2_GCC_SHARED_LIBGCC is not set + +# +# Ccache Options +# +# BR2_CCACHE is not set + +# +# Gdb Options +# +# BR2_PACKAGE_GDB is not set +BR2_PACKAGE_GDB_SERVER=y +BR2_PACKAGE_GDB_HOST=y +# BR2_GDB_VERSION_6_2_1 is not set +# BR2_GDB_VERSION_6_3 is not set +BR2_GDB_VERSION_6_4=y +# BR2_GDB_VERSION_6_5 is not set +# BR2_GDB_VERSION_SNAPSHOT is not set +BR2_GDB_VERSION="6.4" + +# +# elf2flt +# +# BR2_ELF2FLT is not set +# BR2_MKLIBS is not set + +# +# Common Toolchain Options +# +# BR2_PACKAGE_SSTRIP_TARGET is not set +# BR2_PACKAGE_SSTRIP_HOST is not set +# BR2_ENABLE_MULTILIB is not set +BR2_LARGEFILE=y +BR2_TARGET_OPTIMIZATION="-Os -pipe" +BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y + +# +# Package Selection for the target +# + +# +# The default minimal system +# +BR2_PACKAGE_BUSYBOX=y +# BR2_BUSYBOX_VERSION_1_0_1 is not set +# BR2_BUSYBOX_VERSION_1_1_3 is not set +# BR2_BUSYBOX_VERSION_1_2_2_1 is not set +# BR2_BUSYBOX_VERSION_1_4_0 is not set +# BR2_BUSYBOX_VERSION_1_4_1 is not set +# BR2_BUSYBOX_VERSION_1_4_2 is not set +BR2_BUSYBOX_VERSION_1_5_0=y +# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set +BR2_BUSYBOX_VERSION="1.5.0" +BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y +BR2_PACKAGE_BUSYBOX_CONFIG="" +BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y +BR2_PACKAGE_BUSYBOX_SKELETON=y + +# +# The minimum needed to build a uClibc development system +# +BR2_PACKAGE_BASH=y +BR2_PACKAGE_BZIP2=y +# BR2_PACKAGE_DIFFUTILS is not set +# BR2_PACKAGE_FLEX is not set +# BR2_PACKAGE_GCC_TARGET is not set +# BR2_PACKAGE_MAKE is not set + +# +# Other development stuff +# +# BR2_PACKAGE_AUTOCONF is not set +# BR2_PACKAGE_AUTOMAKE is not set +# BR2_PACKAGE_BISON is not set +# BR2_PACKAGE_CCACHE_TARGET is not set +# BR2_PACKAGE_CVS is not set +# BR2_PACKAGE_DISTCC is not set +# BR2_PACKAGE_DMALLOC is not set +# BR2_PACKAGE_EXPAT is not set +# BR2_PACKAGE_FAKEROOT is not set +BR2_HOST_FAKEROOT=y +# BR2_PACKAGE_GETTEXT is not set +# BR2_PACKAGE_LIBINTL is not set +# BR2_PACKAGE_LIBGMP is not set +# BR2_PACKAGE_LIBMPFR is not set +# BR2_PACKAGE_LIBTOOL is not set +# BR2_PACKAGE_M4 is not set +# BR2_PACKAGE_MPATROL is not set +# BR2_PACKAGE_PKGCONFIG is not set +# BR2_READLINE is not set +# BR2_PACKAGE_XERCES is not set + +# +# Other stuff +# +# BR2_PACKAGE_AT is not set +# BR2_PACKAGE_BERKELEYDB is not set +# BR2_PACKAGE_BSDIFF is not set +# BR2_PACKAGE_CUSTOMIZE is not set +# BR2_PACKAGE_DASH is not set +BR2_PACKAGE_FILE=y +# BR2_PACKAGE_KEXEC is not set +# BR2_PACKAGE_LIBELF is not set +# BR2_PACKAGE_LIBEVENT is not set +# BR2_PACKAGE_LIBFLOAT is not set +# BR2_PACKAGE_LIBLOCKFILE is not set +BR2_PACKAGE_LIBSYSFS=y +# BR2_PACKAGE_LOCKFILE_PROGS is not set +# BR2_PACKAGE_LSOF is not set +# BR2_PACKAGE_LTP-TESTSUITE is not set +# BR2_PACKAGE_LTT is not set +# BR2_PACKAGE_MICROCOM is not set +# BR2_PACKAGE_PORTAGE is not set +# BR2_PACKAGE_SQLITE is not set +BR2_PACKAGE_STRACE=y +# BR2_PACKAGE_SUDO is not set +BR2_NETWORK_SUPPORT=y +# BR2_PACKAGE_ARGUS is not set +BR2_PACKAGE_AVAHI=y +# BR2_PACKAGE_BOA is not set +# BR2_PACKAGE_BIND is not set +BR2_PACKAGE_BRIDGE=y +# BR2_PACKAGE_CURL is not set +# BR2_PACKAGE_LIBCURL is not set +BR2_PACKAGE_DNSMASQ=y +BR2_PACKAGE_DROPBEAR=y +BR2_PACKAGE_DROPBEAR_URANDOM=y +# BR2_PACKAGE_ETHTOOL is not set +BR2_PACKAGE_HASERL=y +# BR2_PACKAGE_HOSTAP is not set +# BR2_PACKAGE_IPERF is not set +# BR2_PACKAGE_IPROUTE2 is not set +# BR2_PACKAGE_IPSEC_TOOLS is not set +BR2_PACKAGE_IPTABLES=y +# BR2_PACKAGE_L2TP is not set +# BR2_PACKAGE_LIBCGI is not set +# BR2_PACKAGE_LIBCGICC is not set +# BR2_PACKAGE_LIBPCAP is not set +# BR2_PACKAGE_LIGHTTPD is not set +# BR2_PACKAGE_LINKS is not set +BR2_PACKAGE_LRZSZ=y +# BR2_PACKAGE_MROUTED is not set +BR2_PACKAGE_NBD=y +# BR2_PACKAGE_NETKITBASE is not set +# BR2_PACKAGE_NETKITTELNET is not set +# BR2_PACKAGE_NETPLUG is not set +# BR2_PACKAGE_NETSNMP is not set +# BR2_PACKAGE_NFS_UTILS is not set +BR2_PACKAGE_NTP=y +# BR2_PACKAGE_OPENNTPD is not set +# BR2_PACKAGE_OPENSSH is not set +# BR2_PACKAGE_OPENSSL is not set +# BR2_PACKAGE_OPENVPN is not set +# BR2_PACKAGE_OPENSWAN is not set +BR2_PACKAGE_PORTMAP=y +# BR2_PACKAGE_PPPD is not set +# BR2_PACKAGE_PROFTPD is not set +BR2_PACKAGE_RSYNC=y +BR2_PACKAGE_SAMBA=y + +# +# Samba tools selection +# +# BR2_PACKAGE_SAMBA_CIFS is not set +# BR2_PACKAGE_SAMBA_EVENTLOGADM is not set +# BR2_PACKAGE_SAMBA_NET is not set +BR2_PACKAGE_SAMBA_NMBD=y +BR2_PACKAGE_SAMBA_NMBLOOKUP=y +# BR2_PACKAGE_SAMBA_NTLM_AUTH is not set +# BR2_PACKAGE_SAMBA_PDBEDIT is not set +# BR2_PACKAGE_SAMBA_PROFILES is not set +# BR2_PACKAGE_SAMBA_RPCCLIENT is not set +# BR2_PACKAGE_SAMBA_SMBCACLS is not set +BR2_PACKAGE_SAMBA_SMBCLIENT=y +# BR2_PACKAGE_SAMBA_SMBCONTROL is not set +# BR2_PACKAGE_SAMBA_SMBCQUOTAS is not set +# BR2_PACKAGE_SAMBA_SMBGET is not set +BR2_PACKAGE_SAMBA_SMBPASSWD=y +# BR2_PACKAGE_SAMBA_SMBSPOOL is not set +BR2_PACKAGE_SAMBA_SMBSTATUS=y +# BR2_PACKAGE_SAMBA_SMBTREE is not set +BR2_PACKAGE_SAMBA_SWAT=y +# BR2_PACKAGE_SAMBA_TDB is not set +# BR2_PACKAGE_SAMBA_TESTPARM is not set +BR2_PACKAGE_SAMBA_WINBINDD=y +# BR2_PACKAGE_SAMBA_WBINFO is not set +# BR2_PACKAGE_SOCAT is not set +# BR2_PACKAGE_STUNNEL is not set +# BR2_PACKAGE_TCPDUMP is not set +# BR2_PACKAGE_TFTPD is not set +# BR2_PACKAGE_TN5250 is not set +# BR2_PACKAGE_TTCP is not set +# BR2_PACKAGE_VTUN is not set +# BR2_PACKAGE_WIRELESS_TOOLS is not set +BR2_BLOCKDEV_SUPPORT=y +# BR2_PACKAGE_DBUS is not set +# BR2_PACKAGE_DM is not set +# BR2_PACKAGE_DMRAID is not set +# BR2_PACKAGE_E2FSPROGS is not set +# BR2_PACKAGE_HAL is not set +# BR2_PACKAGE_HWDATA is not set +# BR2_PACKAGE_IOSTAT is not set +# BR2_PACKAGE_LIBRAW1394 is not set +# BR2_PACKAGE_LIBUSB is not set +# BR2_PACKAGE_LVM2 is not set +# BR2_PACKAGE_MDADM is not set +# BR2_PACKAGE_MEMTESTER is not set +# BR2_PACKAGE_MKDOSFS is not set +BR2_PACKAGE_MTD=y + +# +# MTD package selection +# +BR2_PACKAGE_MTD_ORIG=y +# BR2_PACKAGE_MTD_SNAPSHOT is not set +BR2_PACKAGE_MTD_ORIG_STRING="mtd-utils-1.0.0.tar.gz" + +# +# MTD tools selection +# +BR2_PACKAGE_MTD_FLASH_ERASE=y +BR2_PACKAGE_MTD_FLASH_ERASEALL=y +# BR2_PACKAGE_MTD_FLASH_INFO is not set +# BR2_PACKAGE_MTD_FLASH_LOCK is not set +# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set +# BR2_PACKAGE_MTD_FLASHCP is not set +# BR2_PACKAGE_MTD_ERASE is not set +BR2_PACKAGE_MTD_JFFS2DUMP=y +# BR2_PACKAGE_MTD_JFFS3DUMP is not set +# BR2_PACKAGE_MTD_SUMTOOL is not set +# BR2_PACKAGE_MTD_FTL_CHECK is not set +# BR2_PACKAGE_MTD_FTL_FORMAT is not set +# BR2_PACKAGE_MTD_NFTL_FORMAT is not set +# BR2_PACKAGE_MTD_NFTLDUMP is not set +BR2_PACKAGE_MTD_MKFSJFFS2=y +# BR2_PACKAGE_MTD_MKFSJFFS is not set +# BR2_PACKAGE_MTD_NANDDUMP is not set +# BR2_PACKAGE_MTD_NANDWRITE is not set +BR2_PACKAGE_MTD_MTD_DEBUG=y +# BR2_PACKAGE_MTD_DOCFDISK is not set +# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set +# BR2_PACKAGE_PCIUTILS is not set +# BR2_PACKAGE_PCMCIA is not set +# BR2_PACKAGE_RAIDTOOLS is not set +# BR2_PACKAGE_SETSERIAL is not set +# BR2_PACKAGE_SMARTMONTOOLS is not set +# BR2_PACKAGE_USBMOUNT is not set +# BR2_PACKAGE_USBUTILS is not set +# BR2_PACKAGE_WIPE is not set +# BR2_PACKAGE_XFSPROGS is not set +# BR2_AUDIO_SUPPORT is not set +# BR2_GRAPHIC_SUPPORT is not set +BR2_PACKAGE_NCURSES=y +BR2_COMPRESSOR_SUPPORT=y +# BR2_PACKAGE_LZO is not set +# BR2_PACKAGE_LZMA_TARGET is not set +# BR2_PACKAGE_LZMA_HOST is not set +BR2_PACKAGE_ZLIB=y +# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set +# BR2_SCRIPTING_SUPPORT is not set + +# +# Target Options +# + +# +# filesystem for target device +# +# BR2_TARGET_ROOTFS_CRAMFS is not set +# BR2_TARGET_ROOTFS_CLOOP is not set +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 +BR2_TARGET_ROOTFS_EXT2_INODES=0 +BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 +BR2_TARGET_ROOTFS_EXT2_SQUASH=y +BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2" +# BR2_TARGET_ROOTFS_EXT2_NONE is not set +# BR2_TARGET_ROOTFS_EXT2_GZIP is not set +BR2_TARGET_ROOTFS_EXT2_BZIP2=y +# BR2_TARGET_ROOTFS_EXT2_LZMA is not set +BR2_TARGET_ROOTFS_EXT2_COPYTO="" +BR2_TARGET_ROOTFS_JFFS2=y +BR2_TARGET_ROOTFS_JFFS2_DEFAULT_PAGESIZE=y +BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x10000 +# BR2_JFFS2_TARGET_SREC is not set +# BR2_TARGET_ROOTFS_JFFS2_PAD is not set +# BR2_TARGET_ROOTFS_JFFS2_LE is not set +BR2_TARGET_ROOTFS_JFFS2_BE=y +# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set +BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2" +BR2_TARGET_ROOTFS_JFFS2_COPYTO="" +# BR2_TARGET_ROOTFS_SQUASHFS is not set +BR2_TARGET_ROOTFS_TAR=y +# BR2_TARGET_ROOTFS_TAR_NONE is not set +# BR2_TARGET_ROOTFS_TAR_GZIP is not set +BR2_TARGET_ROOTFS_TAR_BZIP2=y +# BR2_TARGET_ROOTFS_TAR_LZMA is not set +BR2_TARGET_ROOTFS_TAR_OPTIONS="" +# BR2_TARGET_ROOTFS_CPIO is not set + +# +# bootloader for target device +# + +# +# Board Support Options +# +BR2_PACKAGE_LINUX=y +BR2_PACKAGE_LINUX_KCONFIG="" +BR2_PACKAGE_LINUX_FORMAT="" + +# +# Atmel board support +# +# BR2_TARGET_ATMEL_ATSTK1000 is not set +BR2_TARGET_ATMEL_ATNGW100=y + +# +# Generic System Support +# +# BR2_TARGET_GENERIC_ACCESS_POINT is not set +# BR2_TARGET_GENERIC_FIREWALL is not set +# BR2_TARGET_GENERIC_DEV_SYSTEM is not set diff --git a/target/device/Atmel/atngw100/busybox-1.6.1.config b/target/device/Atmel/atngw100/busybox-1.6.1.config new file mode 100644 index 000000000..782ae2333 --- /dev/null +++ b/target/device/Atmel/atngw100/busybox-1.6.1.config @@ -0,0 +1,719 @@ +# +# Automatically generated make config: don't edit +# Busybox version: 1.6.1 +# Fri Jul 27 14:57:35 2007 +# +CONFIG_HAVE_DOT_CONFIG=y + +# +# Busybox Settings +# + +# +# General Configuration +# +# CONFIG_NITPICK is not set +# CONFIG_DESKTOP is not set +# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set +# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +CONFIG_SHOW_USAGE=y +CONFIG_FEATURE_VERBOSE_USAGE=y +# CONFIG_FEATURE_COMPRESS_USAGE is not set +# CONFIG_FEATURE_INSTALLER is not set +# CONFIG_LOCALE_SUPPORT is not set +CONFIG_GETOPT_LONG=y +CONFIG_FEATURE_DEVPTS=y +# CONFIG_FEATURE_CLEAN_UP is not set +# CONFIG_FEATURE_PIDFILE is not set +CONFIG_FEATURE_SUID=y +CONFIG_FEATURE_SYSLOG=y +# CONFIG_FEATURE_SUID_CONFIG is not set +# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set +CONFIG_FEATURE_HAVE_RPC=y +# CONFIG_SELINUX is not set +# CONFIG_FEATURE_PREFER_APPLETS is not set +CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" + +# +# Build Options +# +# CONFIG_STATIC is not set +# CONFIG_BUILD_LIBBUSYBOX is not set +# CONFIG_FEATURE_FULL_LIBBUSYBOX is not set +# CONFIG_FEATURE_SHARED_BUSYBOX is not set +CONFIG_LFS=y +CONFIG_BUILD_AT_ONCE=y + +# +# Debugging Options +# +# CONFIG_DEBUG is not set +# CONFIG_WERROR is not set +CONFIG_NO_DEBUG_LIB=y +# CONFIG_DMALLOC is not set +# CONFIG_EFENCE is not set +CONFIG_INCLUDE_SUSv2=y + +# +# Installation Options +# +# CONFIG_INSTALL_NO_USR is not set +CONFIG_INSTALL_APPLET_SYMLINKS=y +# CONFIG_INSTALL_APPLET_HARDLINKS is not set +# CONFIG_INSTALL_APPLET_DONT is not set +CONFIG_PREFIX="/home/avr32/buildroot/project_build_avr32/atngw100/root" + +# +# Busybox Library Tuning +# +CONFIG_PASSWORD_MINLEN=6 +CONFIG_MD5_SIZE_VS_SPEED=2 +# CONFIG_FEATURE_EDITING is not set +# CONFIG_FEATURE_EDITING_FANCY_KEYS is not set +# CONFIG_FEATURE_EDITING_VI is not set +CONFIG_FEATURE_EDITING_HISTORY= +# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set +# CONFIG_FEATURE_TAB_COMPLETION is not set +# CONFIG_FEATURE_USERNAME_COMPLETION is not set +# CONFIG_FEATURE_EDITING_FANCY_PROMPT is not set + +# +# Applets +# + +# +# Archival Utilities +# +# CONFIG_AR is not set +# CONFIG_FEATURE_AR_LONG_FILENAMES is not set +# CONFIG_BUNZIP2 is not set +# CONFIG_CPIO is not set +# CONFIG_DPKG is not set +# CONFIG_DPKG_DEB is not set +# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set +# CONFIG_GUNZIP is not set +# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set +# CONFIG_GZIP is not set +# CONFIG_RPM2CPIO is not set +# CONFIG_RPM is not set +CONFIG_TAR=y +CONFIG_FEATURE_TAR_CREATE=y +CONFIG_FEATURE_TAR_BZIP2=y +CONFIG_FEATURE_TAR_LZMA=y +# CONFIG_FEATURE_TAR_FROM is not set +CONFIG_FEATURE_TAR_GZIP=y +# CONFIG_FEATURE_TAR_COMPRESS is not set +# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set +CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y +# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set +# CONFIG_UNCOMPRESS is not set +CONFIG_UNLZMA=y +CONFIG_FEATURE_LZMA_FAST=y +CONFIG_UNZIP=y + +# +# Common options for cpio and tar +# +# CONFIG_FEATURE_UNARCHIVE_TAPE is not set +# CONFIG_FEATURE_DEB_TAR_GZ is not set +# CONFIG_FEATURE_DEB_TAR_BZ2 is not set +# CONFIG_FEATURE_DEB_TAR_LZMA is not set + +# +# Coreutils +# +CONFIG_BASENAME=y +CONFIG_CAL=y +CONFIG_CAT=y +# CONFIG_CATV is not set +CONFIG_CHGRP=y +CONFIG_CHMOD=y +CONFIG_CHOWN=y +CONFIG_CHROOT=y +# CONFIG_CKSUM is not set +CONFIG_CMP=y +# CONFIG_COMM is not set +CONFIG_CP=y +CONFIG_CUT=y +CONFIG_DATE=y +CONFIG_FEATURE_DATE_ISOFMT=y +CONFIG_DD=y +# CONFIG_FEATURE_DD_SIGNAL_HANDLING is not set +# CONFIG_FEATURE_DD_IBS_OBS is not set +CONFIG_DF=y +# CONFIG_DIFF is not set +# CONFIG_FEATURE_DIFF_BINARY is not set +# CONFIG_FEATURE_DIFF_DIR is not set +# CONFIG_FEATURE_DIFF_MINIMAL is not set +CONFIG_DIRNAME=y +CONFIG_DOS2UNIX=y +CONFIG_UNIX2DOS=y +CONFIG_DU=y +CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y +CONFIG_ECHO=y +CONFIG_FEATURE_FANCY_ECHO=y +CONFIG_ENV=y +# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set +CONFIG_EXPR=y +CONFIG_EXPR_MATH_SUPPORT_64=y +CONFIG_FALSE=y +# CONFIG_FOLD is not set +CONFIG_HEAD=y +# CONFIG_FEATURE_FANCY_HEAD is not set +CONFIG_HOSTID=y +CONFIG_ID=y +CONFIG_INSTALL=y +# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set +# CONFIG_LENGTH is not set +CONFIG_LN=y +CONFIG_LOGNAME=y +CONFIG_LS=y +CONFIG_FEATURE_LS_FILETYPES=y +CONFIG_FEATURE_LS_FOLLOWLINKS=y +CONFIG_FEATURE_LS_RECURSIVE=y +CONFIG_FEATURE_LS_SORTFILES=y +CONFIG_FEATURE_LS_TIMESTAMPS=y +CONFIG_FEATURE_LS_USERNAME=y +CONFIG_FEATURE_LS_COLOR=y +CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y +CONFIG_MD5SUM=y +CONFIG_MKDIR=y +# CONFIG_FEATURE_MKDIR_LONG_OPTIONS is not set +CONFIG_MKFIFO=y +CONFIG_MKNOD=y +CONFIG_MV=y +# CONFIG_FEATURE_MV_LONG_OPTIONS is not set +CONFIG_NICE=y +# CONFIG_NOHUP is not set +# CONFIG_OD is not set +# CONFIG_PRINTENV is not set +# CONFIG_PRINTF is not set +CONFIG_PWD=y +# CONFIG_REALPATH is not set +CONFIG_RM=y +CONFIG_RMDIR=y +# CONFIG_SEQ is not set +CONFIG_SHA1SUM=y +CONFIG_SLEEP=y +# CONFIG_FEATURE_FANCY_SLEEP is not set +CONFIG_SORT=y +CONFIG_FEATURE_SORT_BIG=y +# CONFIG_SPLIT is not set +# CONFIG_FEATURE_SPLIT_FANCY is not set +# CONFIG_STAT is not set +# CONFIG_FEATURE_STAT_FORMAT is not set +CONFIG_STTY=y +# CONFIG_SUM is not set +CONFIG_SYNC=y +CONFIG_TAIL=y +CONFIG_FEATURE_FANCY_TAIL=y +CONFIG_TEE=y +CONFIG_FEATURE_TEE_USE_BLOCK_IO=y +CONFIG_TEST=y +CONFIG_FEATURE_TEST_64=y +CONFIG_TOUCH=y +# CONFIG_TR is not set +# CONFIG_FEATURE_TR_CLASSES is not set +# CONFIG_FEATURE_TR_EQUIV is not set +CONFIG_TRUE=y +CONFIG_TTY=y +CONFIG_UNAME=y +CONFIG_UNIQ=y +CONFIG_USLEEP=y +CONFIG_UUDECODE=y +CONFIG_UUENCODE=y +# CONFIG_WATCH is not set +CONFIG_WC=y +# CONFIG_FEATURE_WC_LARGE is not set +CONFIG_WHO=y +CONFIG_WHOAMI=y +CONFIG_YES=y + +# +# Common options for cp and mv +# +CONFIG_FEATURE_PRESERVE_HARDLINKS=y + +# +# Common options for ls, more and telnet +# +CONFIG_FEATURE_AUTOWIDTH=y + +# +# Common options for df, du, ls +# +CONFIG_FEATURE_HUMAN_READABLE=y + +# +# Common options for md5sum, sha1sum +# +CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y + +# +# Console Utilities +# +CONFIG_CHVT=y +CONFIG_CLEAR=y +CONFIG_DEALLOCVT=y +# CONFIG_DUMPKMAP is not set +# CONFIG_LOADFONT is not set +# CONFIG_LOADKMAP is not set +CONFIG_OPENVT=y +CONFIG_RESET=y +CONFIG_RESIZE=y +CONFIG_FEATURE_RESIZE_PRINT=y +CONFIG_SETCONSOLE=y +# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set +# CONFIG_SETKEYCODES is not set +# CONFIG_SETLOGCONS is not set + +# +# Debian Utilities +# +CONFIG_MKTEMP=y +# CONFIG_PIPE_PROGRESS is not set +CONFIG_READLINK=y +CONFIG_FEATURE_READLINK_FOLLOW=y +CONFIG_RUN_PARTS=y +CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y +# CONFIG_FEATURE_RUN_PARTS_FANCY is not set +CONFIG_START_STOP_DAEMON=y +CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y +CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y +CONFIG_WHICH=y + +# +# Editors +# +# CONFIG_AWK is not set +# CONFIG_FEATURE_AWK_MATH is not set +# CONFIG_ED is not set +CONFIG_PATCH=y +CONFIG_SED=y +CONFIG_VI=y +CONFIG_FEATURE_VI_COLON=y +CONFIG_FEATURE_VI_YANKMARK=y +CONFIG_FEATURE_VI_SEARCH=y +CONFIG_FEATURE_VI_USE_SIGNALS=y +CONFIG_FEATURE_VI_DOT_CMD=y +CONFIG_FEATURE_VI_READONLY=y +CONFIG_FEATURE_VI_SETOPTS=y +CONFIG_FEATURE_VI_SET=y +CONFIG_FEATURE_VI_WIN_RESIZE=y +CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y +CONFIG_FEATURE_ALLOW_EXEC=y + +# +# Finding Utilities +# +CONFIG_FIND=y +CONFIG_FEATURE_FIND_PRINT0=y +CONFIG_FEATURE_FIND_MTIME=y +CONFIG_FEATURE_FIND_MMIN=y +CONFIG_FEATURE_FIND_PERM=y +CONFIG_FEATURE_FIND_TYPE=y +CONFIG_FEATURE_FIND_XDEV=y +CONFIG_FEATURE_FIND_NEWER=y +CONFIG_FEATURE_FIND_INUM=y +CONFIG_FEATURE_FIND_EXEC=y +CONFIG_FEATURE_FIND_USER=y +CONFIG_FEATURE_FIND_GROUP=y +CONFIG_FEATURE_FIND_NOT=y +CONFIG_FEATURE_FIND_DEPTH=y +CONFIG_FEATURE_FIND_PAREN=y +CONFIG_FEATURE_FIND_SIZE=y +CONFIG_FEATURE_FIND_PRUNE=y +CONFIG_FEATURE_FIND_DELETE=y +CONFIG_FEATURE_FIND_PATH=y +CONFIG_GREP=y +CONFIG_FEATURE_GREP_EGREP_ALIAS=y +CONFIG_FEATURE_GREP_FGREP_ALIAS=y +CONFIG_FEATURE_GREP_CONTEXT=y +CONFIG_XARGS=y +CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y +CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y +CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y +CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y + +# +# Init Utilities +# +CONFIG_INIT=y +# CONFIG_DEBUG_INIT is not set +CONFIG_FEATURE_USE_INITTAB=y +CONFIG_FEATURE_INIT_SCTTY=y +CONFIG_FEATURE_INIT_SYSLOG=y +CONFIG_FEATURE_EXTRA_QUIET=y +# CONFIG_FEATURE_INIT_COREDUMPS is not set +CONFIG_FEATURE_INITRD=y +CONFIG_HALT=y +# CONFIG_MESG is not set + +# +# Login/Password Management Utilities +# +CONFIG_FEATURE_SHADOWPASSWDS=y +# CONFIG_USE_BB_SHADOW is not set +# CONFIG_USE_BB_PWD_GRP is not set +CONFIG_ADDGROUP=y +CONFIG_FEATURE_ADDUSER_TO_GROUP=y +CONFIG_DELGROUP=y +CONFIG_FEATURE_DEL_USER_FROM_GROUP=y +CONFIG_ADDUSER=y +CONFIG_DELUSER=y +CONFIG_GETTY=y +CONFIG_FEATURE_UTMP=y +# CONFIG_FEATURE_WTMP is not set +CONFIG_LOGIN=y +CONFIG_LOGIN_SCRIPTS=y +CONFIG_FEATURE_SECURETTY=y +CONFIG_PASSWD=y +CONFIG_FEATURE_PASSWD_WEAK_CHECK=y +# CONFIG_CRYPTPW is not set +CONFIG_SU=y +CONFIG_FEATURE_SU_SYSLOG=y +CONFIG_FEATURE_SU_CHECKS_SHELLS=y +CONFIG_SULOGIN=y +CONFIG_VLOCK=y + +# +# Linux Ext2 FS Progs +# +# CONFIG_CHATTR is not set +# CONFIG_FSCK is not set +# CONFIG_LSATTR is not set + +# +# Linux Module Utilities +# +CONFIG_INSMOD=y +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +CONFIG_RMMOD=y +CONFIG_LSMOD=y +CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y +CONFIG_MODPROBE=y +CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y +CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y + +# +# Options common to multiple modutils +# +CONFIG_FEATURE_CHECK_TAINTED_MODULE=y +# CONFIG_FEATURE_2_4_MODULES is not set +CONFIG_FEATURE_2_6_MODULES=y +# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set + +# +# Linux System Utilities +# +CONFIG_DMESG=y +CONFIG_FEATURE_DMESG_PRETTY=y +# CONFIG_FBSET is not set +# CONFIG_FEATURE_FBSET_FANCY is not set +# CONFIG_FEATURE_FBSET_READMODE is not set +# CONFIG_FDFLUSH is not set +CONFIG_FDFORMAT=y +CONFIG_FDISK=y +CONFIG_FDISK_SUPPORT_LARGE_DISKS=y +CONFIG_FEATURE_FDISK_WRITABLE=y +# CONFIG_FEATURE_AIX_LABEL is not set +# CONFIG_FEATURE_SGI_LABEL is not set +# CONFIG_FEATURE_SUN_LABEL is not set +# CONFIG_FEATURE_OSF_LABEL is not set +# CONFIG_FEATURE_FDISK_ADVANCED is not set +# CONFIG_FREERAMDISK is not set +# CONFIG_FSCK_MINIX is not set +# CONFIG_MKFS_MINIX is not set +# CONFIG_FEATURE_MINIX2 is not set +CONFIG_GETOPT=y +CONFIG_HEXDUMP=y +CONFIG_HWCLOCK=y +# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set +# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set +CONFIG_IPCRM=y +CONFIG_IPCS=y +# CONFIG_LOSETUP is not set +CONFIG_MDEV=y +CONFIG_FEATURE_MDEV_CONF=y +CONFIG_FEATURE_MDEV_EXEC=y +CONFIG_MKSWAP=y +# CONFIG_FEATURE_MKSWAP_V0 is not set +CONFIG_MORE=y +CONFIG_FEATURE_USE_TERMIOS=y +CONFIG_MOUNT=y +CONFIG_FEATURE_MOUNT_NFS=y +CONFIG_FEATURE_MOUNT_CIFS=y +CONFIG_FEATURE_MOUNT_FLAGS=y +CONFIG_FEATURE_MOUNT_FSTAB=y +CONFIG_PIVOT_ROOT=y +CONFIG_RDATE=y +# CONFIG_READPROFILE is not set +# CONFIG_SETARCH is not set +CONFIG_SWAPONOFF=y +CONFIG_SWITCH_ROOT=y +CONFIG_UMOUNT=y +CONFIG_FEATURE_UMOUNT_ALL=y + +# +# Common options for mount/umount +# +CONFIG_FEATURE_MOUNT_LOOP=y +# CONFIG_FEATURE_MTAB_SUPPORT is not set + +# +# Miscellaneous Utilities +# +# CONFIG_ADJTIMEX is not set +# CONFIG_BBCONFIG is not set +# CONFIG_CHRT is not set +# CONFIG_CROND is not set +# CONFIG_DEBUG_CROND_OPTION is not set +# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +# CONFIG_CRONTAB is not set +CONFIG_DC=y +# CONFIG_DEVFSD is not set +# CONFIG_DEVFSD_MODLOAD is not set +# CONFIG_DEVFSD_FG_NP is not set +# CONFIG_DEVFSD_VERBOSE is not set +# CONFIG_FEATURE_DEVFS is not set +# CONFIG_EJECT is not set +# CONFIG_LAST is not set +CONFIG_LESS=y +CONFIG_FEATURE_LESS_MAXLINES=9999999 +# CONFIG_FEATURE_LESS_BRACKETS is not set +# CONFIG_FEATURE_LESS_FLAGS is not set +# CONFIG_FEATURE_LESS_FLAGCS is not set +# CONFIG_FEATURE_LESS_MARKS is not set +CONFIG_FEATURE_LESS_REGEXP=y +# CONFIG_HDPARM is not set +# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set +# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set +# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set +# CONFIG_MAKEDEVS is not set +# CONFIG_FEATURE_MAKEDEVS_LEAF is not set +# CONFIG_FEATURE_MAKEDEVS_TABLE is not set +# CONFIG_MOUNTPOINT is not set +CONFIG_MT=y +# CONFIG_NMETER is not set +# CONFIG_RAIDAUTORUN is not set +# CONFIG_READAHEAD is not set +# CONFIG_RUNLEVEL is not set +CONFIG_RX=y +CONFIG_STRINGS=y +# CONFIG_SETSID is not set +# CONFIG_TASKSET is not set +# CONFIG_FEATURE_TASKSET_FANCY is not set +CONFIG_TIME=y +CONFIG_WATCHDOG=y + +# +# Networking Utilities +# +CONFIG_FEATURE_IPV6=y +# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set +CONFIG_ARP=y +CONFIG_ARPING=y +# CONFIG_DNSD is not set +# CONFIG_ETHER_WAKE is not set +# CONFIG_FAKEIDENTD is not set +# CONFIG_FTPGET is not set +# CONFIG_FTPPUT is not set +# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set +CONFIG_HOSTNAME=y +CONFIG_HTTPD=y +CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y +CONFIG_FEATURE_HTTPD_SETUID=y +CONFIG_FEATURE_HTTPD_BASIC_AUTH=y +CONFIG_FEATURE_HTTPD_AUTH_MD5=y +CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y +CONFIG_FEATURE_HTTPD_CGI=y +CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y +CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y +CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y +CONFIG_IFCONFIG=y +CONFIG_FEATURE_IFCONFIG_STATUS=y +# CONFIG_FEATURE_IFCONFIG_SLIP is not set +# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set +CONFIG_FEATURE_IFCONFIG_HW=y +# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set +CONFIG_IFUPDOWN=y +# CONFIG_FEATURE_IFUPDOWN_IP is not set +# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set +CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y +CONFIG_FEATURE_IFUPDOWN_IPV4=y +CONFIG_FEATURE_IFUPDOWN_IPV6=y +# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set +CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y +CONFIG_INETD=y +CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y +CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y +CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y +CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y +CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y +CONFIG_FEATURE_INETD_RPC=y +# CONFIG_IP is not set +# CONFIG_FEATURE_IP_ADDRESS is not set +# CONFIG_FEATURE_IP_LINK is not set +# CONFIG_FEATURE_IP_ROUTE is not set +# CONFIG_FEATURE_IP_TUNNEL is not set +# CONFIG_FEATURE_IP_RULE is not set +# CONFIG_FEATURE_IP_SHORT_FORMS is not set +# CONFIG_IPADDR is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_IPRULE is not set +# CONFIG_IPCALC is not set +# CONFIG_FEATURE_IPCALC_FANCY is not set +# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set +# CONFIG_NAMEIF is not set +# CONFIG_NC is not set +# CONFIG_NC_SERVER is not set +# CONFIG_NC_EXTRA is not set +CONFIG_NETSTAT=y +CONFIG_FEATURE_NETSTAT_WIDE=y +CONFIG_NSLOOKUP=y +CONFIG_PING=y +CONFIG_PING6=y +CONFIG_FEATURE_FANCY_PING=y +CONFIG_ROUTE=y +CONFIG_TELNET=y +CONFIG_FEATURE_TELNET_TTYPE=y +# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set +CONFIG_TELNETD=y +CONFIG_FEATURE_TELNETD_STANDALONE=y +# CONFIG_TFTP is not set +# CONFIG_FEATURE_TFTP_GET is not set +# CONFIG_FEATURE_TFTP_PUT is not set +# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set +# CONFIG_DEBUG_TFTP is not set +CONFIG_TRACEROUTE=y +CONFIG_FEATURE_TRACEROUTE_VERBOSE=y +# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set +# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set +# CONFIG_APP_UDHCPD is not set +# CONFIG_APP_DHCPRELAY is not set +# CONFIG_APP_DUMPLEASES is not set +CONFIG_APP_UDHCPC=y +CONFIG_FEATURE_UDHCP_SYSLOG=y +# CONFIG_FEATURE_UDHCP_DEBUG is not set +# CONFIG_FEATURE_RFC3397 is not set +CONFIG_VCONFIG=y +CONFIG_WGET=y +CONFIG_FEATURE_WGET_STATUSBAR=y +CONFIG_FEATURE_WGET_AUTHENTICATION=y +# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set +# CONFIG_ZCIP is not set + +# +# Process Utilities +# +CONFIG_FREE=y +# CONFIG_FUSER is not set +CONFIG_KILL=y +CONFIG_KILLALL=y +CONFIG_KILLALL5=y +CONFIG_PIDOF=y +CONFIG_FEATURE_PIDOF_SINGLE=y +CONFIG_FEATURE_PIDOF_OMIT=y +CONFIG_PS=y +CONFIG_FEATURE_PS_WIDE=y +# CONFIG_RENICE is not set +# CONFIG_BB_SYSCTL is not set +CONFIG_TOP=y +CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y +CONFIG_UPTIME=y + +# +# Shells +# +CONFIG_FEATURE_SH_IS_ASH=y +# CONFIG_FEATURE_SH_IS_HUSH is not set +# CONFIG_FEATURE_SH_IS_LASH is not set +# CONFIG_FEATURE_SH_IS_MSH is not set +# CONFIG_FEATURE_SH_IS_NONE is not set +CONFIG_ASH=y + +# +# Ash Shell Options +# +CONFIG_ASH_JOB_CONTROL=y +CONFIG_ASH_READ_NCHARS=y +CONFIG_ASH_READ_TIMEOUT=y +CONFIG_ASH_ALIAS=y +CONFIG_ASH_MATH_SUPPORT=y +CONFIG_ASH_MATH_SUPPORT_64=y +# CONFIG_ASH_GETOPTS is not set +CONFIG_ASH_BUILTIN_ECHO=y +CONFIG_ASH_BUILTIN_TEST=y +# CONFIG_ASH_CMDCMD is not set +# CONFIG_ASH_MAIL is not set +CONFIG_ASH_OPTIMIZE_FOR_SIZE=y +# CONFIG_ASH_RANDOM_SUPPORT is not set +CONFIG_ASH_EXPAND_PRMT=y +# CONFIG_HUSH is not set +# CONFIG_HUSH_HELP is not set +# CONFIG_HUSH_INTERACTIVE is not set +# CONFIG_HUSH_JOB is not set +# CONFIG_HUSH_TICK is not set +# CONFIG_HUSH_IF is not set +# CONFIG_HUSH_LOOPS is not set +# CONFIG_LASH is not set +# CONFIG_MSH is not set + +# +# Bourne Shell Options +# +# CONFIG_FEATURE_SH_EXTRA_QUIET is not set +# CONFIG_FEATURE_SH_STANDALONE is not set +# CONFIG_CTTYHACK is not set + +# +# System Logging Utilities +# +CONFIG_SYSLOGD=y +CONFIG_FEATURE_ROTATE_LOGFILE=y +# CONFIG_FEATURE_REMOTE_LOG is not set +# CONFIG_FEATURE_IPC_SYSLOG is not set +CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE= +# CONFIG_LOGREAD is not set +# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set +CONFIG_KLOGD=y +CONFIG_LOGGER=y + +# +# Runit Utilities +# +# CONFIG_RUNSV is not set +# CONFIG_RUNSVDIR is not set +# CONFIG_SV is not set +# CONFIG_SVLOGD is not set +# CONFIG_CHPST is not set +# CONFIG_SETUIDGID is not set +# CONFIG_ENVUIDGID is not set +# CONFIG_ENVDIR is not set +# CONFIG_SOFTLIMIT is not set +# CONFIG_CHCON is not set +# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set +# CONFIG_GETENFORCE is not set +# CONFIG_GETSEBOOL is not set +# CONFIG_LOAD_POLICY is not set +# CONFIG_MATCHPATHCON is not set +# CONFIG_RUNCON is not set +# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_SETENFORCE is not set + +# +# ipsvd utilities +# +# CONFIG_TCPSVD is not set +# CONFIG_UDPSVD is not set diff --git a/target/device/Atmel/atngw100/device_table.txt b/target/device/Atmel/atngw100/device_table.txt new file mode 100644 index 000000000..d0892608b --- /dev/null +++ b/target/device/Atmel/atngw100/device_table.txt @@ -0,0 +1,180 @@ +# When building a target filesystem, it is desirable to not have to +# become root and then run 'mknod' a thousand times. Using a device +# table you can create device nodes and directories "on the fly". +# +# This is a sample device table file for use with genext2fs. You can +# do all sorts of interesting things with a device table file. For +# example, if you want to adjust the permissions on a particular file +# you can just add an entry like: +# /sbin/foobar f 2755 0 0 - - - - - +# and (assuming the file /sbin/foobar exists) it will be made setuid +# root (regardless of what its permissions are on the host filesystem. +# Furthermore, you can use a single table entry to create a many device +# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] +# I could just use the following two table entries: +# /dev/hda b 640 0 0 3 0 0 0 - +# /dev/hda b 640 0 0 3 1 1 1 15 +# +# Device table entries take the form of: +# +# where name is the file name, type can be one of: +# f A regular file +# d Directory +# c Character special device file +# b Block special device file +# p Fifo (named pipe) +# uid is the user id for the target file, gid is the group id for the +# target file. The rest of the entries (major, minor, etc) apply only +# to device special files. + +# Have fun +# -Erik Andersen +# + +# +/dev d 755 0 0 - - - - - +#/dev/pts d 755 0 0 - - - - - +#/dev/shm d 755 0 0 - - - - - +/tmp d 1777 0 0 - - - - - +/etc d 755 0 0 - - - - - +/sys d 755 0 0 - - - - - +/config d 755 0 0 - - - - - +/proc d 755 0 0 - - - - - +/lost+found d 700 0 0 - - - - - +/var/tmp d 1777 0 0 - - - - - +/var/lock d 1777 0 0 - - - - - +/var/run d 1777 0 0 - - - - - +/home/avr32 d 2755 500 500 - - - - - +/home/default d 2755 1000 1000 - - - - - +/www d 755 0 0 - - - - - +# +/bin/busybox f 4755 0 0 - - - - - +#/etc/shadow f 600 0 0 - - - - - +/etc/passwd f 644 0 0 - - - - - +/etc/network/if-up.d d 755 0 0 - - - - - +/etc/network/if-pre-up.d d 755 0 0 - - - - - +/etc/network/if-down.d d 755 0 0 - - - - - +/etc/network/if-post-down.d d 755 0 0 - - - - - +/usr/share/udhcpc/default.script f 755 0 0 - - - - - +# uncomment this to allow starting x as non-root +#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - - +# Normal system devices +#/dev/mem c 640 0 0 1 1 0 0 - +#/dev/kmem c 640 0 0 1 2 0 0 - +#/dev/null c 666 0 0 1 3 0 0 - +#/dev/zero c 666 0 0 1 5 0 0 - +#/dev/random c 666 0 0 1 8 0 0 - +#/dev/urandom c 666 0 0 1 9 0 0 - +#/dev/ram b 640 0 0 1 1 0 0 - +#/dev/ram b 640 0 0 1 0 0 1 4 +#/dev/loop b 640 0 0 7 0 0 1 2 +#/dev/rtc c 640 0 0 10 135 - - - +/dev/console c 666 0 0 5 1 - - - +#/dev/tty c 666 0 0 5 0 - - - +#/dev/tty c 666 0 0 4 0 0 1 8 +#/dev/ttyp c 666 0 0 3 0 0 1 10 +#/dev/ptyp c 666 0 0 2 0 0 1 10 +#/dev/ptmx c 666 0 0 5 2 - - - +#/dev/ttyP c 666 0 0 57 0 0 1 4 +#/dev/ttyS c 666 0 0 4 64 0 1 4 +#/dev/fb c 640 0 5 29 0 0 32 4 +#/dev/ttySA c 666 0 0 204 5 0 1 3 +#/dev/psaux c 666 0 0 10 1 0 0 - +#/dev/ppp c 666 0 0 108 0 - - - + +# Input stuff +#/dev/input d 755 0 0 - - - - - +#/dev/input/mice c 640 0 0 13 63 0 0 - +#/dev/input/mouse c 660 0 0 13 32 0 1 4 +#/dev/input/event c 660 0 0 13 64 0 1 4 +#/dev/input/js c 660 0 0 13 0 0 1 4 + + +# MTD stuff +#/dev/mtd c 640 0 0 90 0 0 2 4 +#/dev/mtdblock b 640 0 0 31 0 0 1 4 + +#Tun/tap driver +#/dev/net d 755 0 0 - - - - - +#/dev/net/tun c 660 0 0 10 200 - - - + +# Audio stuff +#/dev/audio c 666 0 29 14 4 - - - +#/dev/audio1 c 666 0 29 14 20 - - - +#/dev/dsp c 666 0 29 14 3 - - - +#/dev/dsp1 c 666 0 29 14 19 - - - +#/dev/sndstat c 666 0 29 14 6 - - - + +# User-mode Linux stuff +#/dev/ubda b 640 0 0 98 0 0 0 - +#/dev/ubda b 640 0 0 98 1 1 1 15 + +# IDE Devices +#/dev/hda b 640 0 0 3 0 0 0 - +#/dev/hda b 640 0 0 3 1 1 1 15 +#/dev/hdb b 640 0 0 3 64 0 0 - +#/dev/hdb b 640 0 0 3 65 1 1 15 +#/dev/hdc b 640 0 0 22 0 0 0 - +#/dev/hdc b 640 0 0 22 1 1 1 15 +#/dev/hdd b 640 0 0 22 64 0 0 - +#/dev/hdd b 640 0 0 22 65 1 1 15 +#/dev/hde b 640 0 0 33 0 0 0 - +#/dev/hde b 640 0 0 33 1 1 1 15 +#/dev/hdf b 640 0 0 33 64 0 0 - +#/dev/hdf b 640 0 0 33 65 1 1 15 +#/dev/hdg b 640 0 0 34 0 0 0 - +#/dev/hdg b 640 0 0 34 1 1 1 15 +#/dev/hdh b 640 0 0 34 64 0 0 - +#/dev/hdh b 640 0 0 34 65 1 1 15 + +# SCSI Devices +#/dev/sda b 640 0 0 8 0 0 0 - +#/dev/sda b 640 0 0 8 1 1 1 15 +#/dev/sdb b 640 0 0 8 16 0 0 - +#/dev/sdb b 640 0 0 8 17 1 1 15 +#/dev/sdc b 640 0 0 8 32 0 0 - +#/dev/sdc b 640 0 0 8 33 1 1 15 +#/dev/sdd b 640 0 0 8 48 0 0 - +#/dev/sdd b 640 0 0 8 49 1 1 15 +#/dev/sde b 640 0 0 8 64 0 0 - +#/dev/sde b 640 0 0 8 65 1 1 15 +#/dev/sdf b 640 0 0 8 80 0 0 - +#/dev/sdf b 640 0 0 8 81 1 1 15 +#/dev/sdg b 640 0 0 8 96 0 0 - +#/dev/sdg b 640 0 0 8 97 1 1 15 +#/dev/sdh b 640 0 0 8 112 0 0 - +#/dev/sdh b 640 0 0 8 113 1 1 15 +#/dev/sg c 640 0 0 21 0 0 1 15 +#/dev/scd b 640 0 0 11 0 0 1 15 +#/dev/st c 640 0 0 9 0 0 1 8 +#/dev/nst c 640 0 0 9 128 0 1 8 +#/dev/st c 640 0 0 9 32 1 1 4 +#/dev/st c 640 0 0 9 64 1 1 4 +#/dev/st c 640 0 0 9 96 1 1 4 + +# Floppy disk devices +#/dev/fd b 640 0 0 2 0 0 1 2 +#/dev/fd0d360 b 640 0 0 2 4 0 0 - +#/dev/fd1d360 b 640 0 0 2 5 0 0 - +#/dev/fd0h1200 b 640 0 0 2 8 0 0 - +#/dev/fd1h1200 b 640 0 0 2 9 0 0 - +#/dev/fd0u1440 b 640 0 0 2 28 0 0 - +#/dev/fd1u1440 b 640 0 0 2 29 0 0 - +#/dev/fd0u2880 b 640 0 0 2 32 0 0 - +#/dev/fd1u2880 b 640 0 0 2 33 0 0 - + +# All the proprietary cdrom devices in the world +#/dev/aztcd b 640 0 0 29 0 0 0 - +#/dev/bpcd b 640 0 0 41 0 0 0 - +#/dev/capi20 c 640 0 0 68 0 0 1 2 +#/dev/cdu31a b 640 0 0 15 0 0 0 - +#/dev/cdu535 b 640 0 0 24 0 0 0 - +#/dev/cm206cd b 640 0 0 32 0 0 0 - +#/dev/sjcd b 640 0 0 18 0 0 0 - +#/dev/sonycd b 640 0 0 15 0 0 0 - +#/dev/gscd b 640 0 0 16 0 0 0 - +#/dev/sbpcd b 640 0 0 25 0 0 0 - +#/dev/sbpcd b 640 0 0 25 0 0 1 4 +#/dev/mcd b 640 0 0 23 0 0 0 - +#/dev/optcd b 640 0 0 17 0 0 0 - + diff --git a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.22-atmel.3-avr32-updates.patch b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.22-atmel.3-avr32-updates.patch new file mode 100644 index 000000000..24f93bd76 --- /dev/null +++ b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.22-atmel.3-avr32-updates.patch @@ -0,0 +1,14834 @@ +diff --git a/MAINTAINERS b/MAINTAINERS +index df40a4e..3c5cfef 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -674,6 +674,13 @@ P: Haavard Skinnemoen + M: hskinnemoen@atmel.com + S: Supported + ++ATMEL USBA UDC DRIVER ++P: Haavard Skinnemoen ++M: hskinnemoen@atmel.com ++L: kernel@avr32linux.org ++W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver ++S: Supported ++ + ATMEL WIRELESS DRIVER + P: Simon Kelley + M: simon@thekelleys.org.uk +diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig +index 3ec7658..ec6c7c5 100644 +--- a/arch/avr32/Kconfig ++++ b/arch/avr32/Kconfig +@@ -113,6 +113,13 @@ config BOARD_ATNGW100 + bool "ATNGW100 Network Gateway" + endchoice + ++if BOARD_ATSTK1000 ++source "arch/avr32/boards/atstk1000/Kconfig" ++endif ++if BOARD_ATNGW100 ++source "arch/avr32/boards/atngw100/Kconfig" ++endif ++ + choice + prompt "Boot loader type" + default LOADER_U_BOOT +@@ -171,6 +178,10 @@ config OWNERSHIP_TRACE + enabling Nexus-compliant debuggers to keep track of the PID of the + currently executing task. + ++config DW_DMAC ++ tristate "Synopsys DesignWare DMA Controller support" ++ default y if CPU_AT32AP7000 ++ + # FPU emulation goes here + + source "kernel/Kconfig.hz" +@@ -185,6 +196,27 @@ config CMDLINE + + endmenu + ++menu "Power managment options" ++ ++menu "CPU Frequency scaling" ++ ++source "drivers/cpufreq/Kconfig" ++ ++config CPU_FREQ_AT32AP ++ bool "CPU frequency driver for AT32AP" ++ depends on CPU_FREQ && PLATFORM_AT32AP ++ default n ++ help ++ This enables the CPU frequency driver for AT32AP processors. ++ ++ For details, take a look in . ++ ++ If in doubt, say N. ++ ++endmenu ++ ++endmenu ++ + menu "Bus options" + + config PCI +diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile +index dc6bc01..eb72198 100644 +--- a/arch/avr32/Makefile ++++ b/arch/avr32/Makefile +@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ + core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ + core-y += arch/avr32/kernel/ + core-y += arch/avr32/mm/ ++drivers-y += arch/avr32/drivers/ + libs-y += arch/avr32/lib/ + + archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap +diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig +new file mode 100644 +index 0000000..5d922df +--- /dev/null ++++ b/arch/avr32/boards/atngw100/Kconfig +@@ -0,0 +1,12 @@ ++# NGW100 customization ++ ++config BOARD_ATNGW100_I2C_GPIO ++ bool "Use GPIO for i2c instead of built-in TWI module" ++ help ++ The driver for the built-in TWI module has been plagued by ++ various problems, while the i2c-gpio driver is based on the ++ trusty old i2c-algo-bit bitbanging engine, making it work ++ on pretty much any setup. ++ ++ Choose 'Y' here if you're having i2c-related problems and ++ want to rule out the i2c bus driver. +diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c +index 6c4dc0a..d649974 100644 +--- a/arch/avr32/boards/atngw100/setup.c ++++ b/arch/avr32/boards/atngw100/setup.c +@@ -9,10 +9,12 @@ + */ + #include + #include ++#include + #include + #include + #include + #include ++#include + #include + + #include +@@ -21,6 +23,7 @@ + #include + #include + #include ++#include + + /* Initialized by bootloader-specific startup code. */ + struct tag *bootloader_tags __initdata; +@@ -39,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = { + }, + }; + ++static struct mci_platform_data __initdata mci0_data = { ++ .detect_pin = GPIO_PIN_PC(25), ++ .wp_pin = GPIO_PIN_PE(0), ++}; ++ + /* + * The next two functions should go away as the boot loader is + * supposed to initialize the macb address registers with a valid +@@ -100,8 +108,46 @@ void __init setup_board(void) + at32_setup_serial_console(0); + } + ++static const struct gpio_led ngw_leds[] = { ++ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1, ++ .default_trigger = "heartbeat", ++ }, ++ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, }, ++ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, }, ++}; ++ ++static const struct gpio_led_platform_data ngw_led_data = { ++ .num_leds = ARRAY_SIZE(ngw_leds), ++ .leds = (void *) ngw_leds, ++}; ++ ++static struct platform_device ngw_gpio_leds = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = (void *) &ngw_led_data, ++ } ++}; ++ ++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO ++static struct i2c_gpio_platform_data i2c_gpio_data = { ++ .sda_pin = GPIO_PIN_PA(6), ++ .scl_pin = GPIO_PIN_PA(7), ++}; ++ ++static struct platform_device i2c_gpio_device = { ++ .name = "i2c-gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &i2c_gpio_data, ++ }, ++}; ++#endif ++ + static int __init atngw100_init(void) + { ++ unsigned i; ++ + /* + * ATNGW100 uses 16-bit SDRAM interface, so we don't need to + * reserve any pins for it. +@@ -115,6 +161,22 @@ static int __init atngw100_init(void) + set_hw_addr(at32_add_device_eth(1, ð_data[1])); + + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); ++ at32_add_device_mci(0, &mci0_data); ++ at32_add_device_usba(0, NULL); ++ ++ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { ++ at32_select_gpio(ngw_leds[i].gpio, ++ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); ++ } ++ platform_device_register(&ngw_gpio_leds); ++ ++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO ++ at32_select_gpio(i2c_gpio_data.sda_pin, 0); ++ at32_select_gpio(i2c_gpio_data.scl_pin, 0); ++ platform_device_register(&i2c_gpio_device); ++#else ++ at32_add_device_twi(0); ++#endif + + return 0; + } +diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig +new file mode 100644 +index 0000000..718578f +--- /dev/null ++++ b/arch/avr32/boards/atstk1000/Kconfig +@@ -0,0 +1,79 @@ ++# STK1000 customization ++ ++if BOARD_ATSTK1002 ++ ++config BOARD_ATSTK1002_CUSTOM ++ bool "Non-default STK-1002 jumper settings" ++ help ++ You will normally leave the jumpers on the CPU card at their ++ default settings. If you need to use certain peripherals, ++ you will need to change some of those jumpers. ++ ++if BOARD_ATSTK1002_CUSTOM ++ ++config BOARD_ATSTK1002_SW1_CUSTOM ++ bool "SW1: use SSC1 (not SPI0)" ++ help ++ This also prevents using the external DAC as an audio interface, ++ and means you can't initialize the on-board QVGA display. ++ ++config BOARD_ATSTK1002_SW2_CUSTOM ++ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)" ++ help ++ If you change this you'll want an updated boot loader putting ++ the console on UART-C not UART-A. ++ ++config BOARD_ATSTK1002_SW3_CUSTOM ++ bool "SW3: use TIMER1 (not SSC0 and GCLK)" ++ help ++ This also prevents using the external DAC as an audio interface. ++ ++config BOARD_ATSTK1002_SW4_CUSTOM ++ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)" ++ help ++ To use the camera interface you'll need a custom card (on the ++ PCI-format connector) connect a video sensor. ++ ++config BOARD_ATSTK1002_SW5_CUSTOM ++ bool "SW5: use MACB1 (not LCDC)" ++ ++config BOARD_ATSTK1002_SW6_CUSTOM ++ bool "SW6: more GPIOs (not MACB0)" ++ ++endif # custom ++ ++config BOARD_ATSTK1002_SPI1 ++ bool "Configure SPI1 controller" ++ depends on !BOARD_ATSTK1002_SW4_CUSTOM ++ help ++ All the signals for the second SPI controller are available on ++ GPIO lines and accessed through the J1 jumper block. Say "y" ++ here to configure that SPI controller. ++ ++config BOARD_ATSTK1002_J2_LED ++ bool ++ default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB ++ ++choice ++ prompt "LEDs connected to J2:" ++ depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM ++ optional ++ help ++ Select this if you have jumpered the J2 jumper block to the ++ LED0..LED7 amber leds, or to the RGB leds, using a ten-pin ++ IDC cable. A default "heartbeat" trigger is provided, but ++ you can of course override this. ++ ++config BOARD_ATSTK1002_J2_LED8 ++ bool "LED0..LED7" ++ help ++ Select this if J2 is jumpered to LED0..LED7 amber leds. ++ ++config BOARD_ATSTK1002_J2_RGB ++ bool "RGB leds" ++ help ++ Select this if J2 is jumpered to the RGB leds. ++ ++endchoice ++ ++endif # stk 1002 +diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c +index e253e86..c958fd4 100644 +--- a/arch/avr32/boards/atstk1000/atstk1002.c ++++ b/arch/avr32/boards/atstk1000/atstk1002.c +@@ -11,10 +11,12 @@ + #include + #include + #include ++#include + #include + #include + #include + #include ++#include + + #include