From 3d8aa36b65b2751d9dc8ba2c42a61f6ae5d5eeaf Mon Sep 17 00:00:00 2001 From: David Anders Date: Wed, 25 Jan 2006 14:59:21 +0000 Subject: add the amd au1500 based q5 board per case 0000374 --- target/device/Config.in | 1 + target/device/jp/Config.in | 18 + target/device/jp/Makefile.in | 7 + target/device/jp/q5/Makefile.in | 10 + target/device/jp/q5/busybox.config | 483 ++++++++++++ target/device/jp/q5/depmod.pl | 237 ++++++ target/device/jp/q5/device_table.txt | 162 ++++ target/device/jp/q5/kernel-patches-2.4.26/001-q5 | 730 ++++++++++++++++++ .../jp/q5/kernel-patches-2.4.26/002-build_fixes | 81 ++ .../q5/kernel-patches-2.4.26/004-correct_toolchain | 24 + .../device/jp/q5/kernel-patches-2.4.26/100-version | 11 + target/device/jp/q5/kernel-patches-2.4.29/001-q5 | 420 ++++++++++ .../q5/kernel-patches-2.4.29/004-correct_toolchain | 24 + .../device/jp/q5/kernel-patches-2.4.29/100-version | 11 + target/device/jp/q5/linux.config | 858 +++++++++++++++++++++ target/device/jp/q5/linux.mk | 132 ++++ target/device/jp/q5/skel.tar.gz | Bin 0 -> 4846 bytes target/device/jp/q5/target_skeleton/etc/TZ | 1 + target/device/jp/q5/target_skeleton/etc/fstab | 8 + target/device/jp/q5/target_skeleton/etc/group | 10 + target/device/jp/q5/target_skeleton/etc/hostname | 1 + target/device/jp/q5/target_skeleton/etc/hosts | 1 + .../jp/q5/target_skeleton/etc/init.d/S20urandom | 44 ++ .../jp/q5/target_skeleton/etc/init.d/S40network | 35 + target/device/jp/q5/target_skeleton/etc/init.d/rcS | 27 + target/device/jp/q5/target_skeleton/etc/inittab | 47 ++ target/device/jp/q5/target_skeleton/etc/inputrc | 44 ++ target/device/jp/q5/target_skeleton/etc/issue | 4 + .../jp/q5/target_skeleton/etc/network/interfaces | 4 + target/device/jp/q5/target_skeleton/etc/passwd | 13 + target/device/jp/q5/target_skeleton/etc/profile | 48 ++ target/device/jp/q5/target_skeleton/etc/protocols | 31 + .../device/jp/q5/target_skeleton/etc/resolv.conf | 2 + target/device/jp/q5/target_skeleton/etc/securetty | 12 + target/device/jp/q5/target_skeleton/etc/services | 302 ++++++++ target/device/jp/q5/target_skeleton/etc/shadow | 12 + .../jp/q5/target_skeleton/root/.bash_history | 0 .../device/jp/q5/target_skeleton/root/.bash_logout | 7 + .../jp/q5/target_skeleton/root/.bash_profile | 15 + target/device/jp/q5/target_skeleton/root/.bashrc | 48 ++ .../usr/share/udhcpc/default.script | 39 + target/device/jp/q5/uClibc.config.mipsel | 160 ++++ 42 files changed, 4124 insertions(+) create mode 100644 target/device/jp/Config.in create mode 100644 target/device/jp/Makefile.in create mode 100644 target/device/jp/q5/Makefile.in create mode 100644 target/device/jp/q5/busybox.config create mode 100755 target/device/jp/q5/depmod.pl create mode 100644 target/device/jp/q5/device_table.txt create mode 100644 target/device/jp/q5/kernel-patches-2.4.26/001-q5 create mode 100644 target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes create mode 100644 target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain create mode 100644 target/device/jp/q5/kernel-patches-2.4.26/100-version create mode 100644 target/device/jp/q5/kernel-patches-2.4.29/001-q5 create mode 100644 target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain create mode 100644 target/device/jp/q5/kernel-patches-2.4.29/100-version create mode 100644 target/device/jp/q5/linux.config create mode 100644 target/device/jp/q5/linux.mk create mode 100644 target/device/jp/q5/skel.tar.gz create mode 100644 target/device/jp/q5/target_skeleton/etc/TZ create mode 100644 target/device/jp/q5/target_skeleton/etc/fstab create mode 100644 target/device/jp/q5/target_skeleton/etc/group create mode 100644 target/device/jp/q5/target_skeleton/etc/hostname create mode 100644 target/device/jp/q5/target_skeleton/etc/hosts create mode 100755 target/device/jp/q5/target_skeleton/etc/init.d/S20urandom create mode 100755 target/device/jp/q5/target_skeleton/etc/init.d/S40network create mode 100755 target/device/jp/q5/target_skeleton/etc/init.d/rcS create mode 100644 target/device/jp/q5/target_skeleton/etc/inittab create mode 100644 target/device/jp/q5/target_skeleton/etc/inputrc create mode 100644 target/device/jp/q5/target_skeleton/etc/issue create mode 100644 target/device/jp/q5/target_skeleton/etc/network/interfaces create mode 100644 target/device/jp/q5/target_skeleton/etc/passwd create mode 100644 target/device/jp/q5/target_skeleton/etc/profile create mode 100644 target/device/jp/q5/target_skeleton/etc/protocols create mode 100644 target/device/jp/q5/target_skeleton/etc/resolv.conf create mode 100644 target/device/jp/q5/target_skeleton/etc/securetty create mode 100644 target/device/jp/q5/target_skeleton/etc/services create mode 100644 target/device/jp/q5/target_skeleton/etc/shadow create mode 100644 target/device/jp/q5/target_skeleton/root/.bash_history create mode 100644 target/device/jp/q5/target_skeleton/root/.bash_logout create mode 100644 target/device/jp/q5/target_skeleton/root/.bash_profile create mode 100644 target/device/jp/q5/target_skeleton/root/.bashrc create mode 100755 target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script create mode 100644 target/device/jp/q5/uClibc.config.mipsel (limited to 'target/device') diff --git a/target/device/Config.in b/target/device/Config.in index 8378bff13..a3b6179ab 100644 --- a/target/device/Config.in +++ b/target/device/Config.in @@ -5,6 +5,7 @@ source "target/device/Hitachi/Config.in" source "target/device/AMD/Config.in" source "target/device/Via/Config.in" source "target/device/Sharp/Config.in" +source "target/device/jp/Config.in" # This must be last source "target/generic/Config.in" diff --git a/target/device/jp/Config.in b/target/device/jp/Config.in new file mode 100644 index 000000000..6a8f9936b --- /dev/null +++ b/target/device/jp/Config.in @@ -0,0 +1,18 @@ +config BR2_TARGET_Q5 + bool "jp-embedded Q5 board support" + default n + depends BR2_mipsel + select BR2_PACKAGE_LINUX + help + jp-embedded Q5 series MIPS based boards, see http://www.jp-embedded.com for further information. + +comment "Package support" + depends BR2_TARGET_Q5 + +config BR2_PACKAGE_LINUX + bool "linux" + default n + depends BR2_TARGET_Q5 + help + The Linux kernel. + http://www.kernel.org/ diff --git a/target/device/jp/Makefile.in b/target/device/jp/Makefile.in new file mode 100644 index 000000000..acb173d1a --- /dev/null +++ b/target/device/jp/Makefile.in @@ -0,0 +1,7 @@ +# Override the default uClibc configuration +ifeq ($(strip $(BR2_TARGET_Q5)),y) + +include target/device/jp/q5/Makefile.in +include target/device/jp/q5/linux.mk + +endif diff --git a/target/device/jp/q5/Makefile.in b/target/device/jp/q5/Makefile.in new file mode 100644 index 000000000..9c980801f --- /dev/null +++ b/target/device/jp/q5/Makefile.in @@ -0,0 +1,10 @@ +JP_Q5_PATH=target/device/jp/q5 + +BR2_PACKAGE_BUSYBOX_CONFIG=$(JP_Q5_PATH)/busybox.config +UCLIBC_CONFIG_FILE=$(JP_Q5_PATH)/uClibc.config.$(ARCH) + +TARGET_SKELETON=$(JP_Q5_PATH)/skel.tar.gz +TARGET_SKEL_DIR=$(JP_Q5_PATH)/target_skeleton +TARGET_DEVICE_TABLE=$(JP_Q5_PATH)/device_table.txt + +TARGETS+=linux diff --git a/target/device/jp/q5/busybox.config b/target/device/jp/q5/busybox.config new file mode 100644 index 000000000..061e5f445 --- /dev/null +++ b/target/device/jp/q5/busybox.config @@ -0,0 +1,483 @@ +# +# Automatically generated make config: don't edit +# +HAVE_DOT_CONFIG=y + +# +# General Configuration +# +# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set +CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +CONFIG_FEATURE_VERBOSE_USAGE=y +# CONFIG_FEATURE_INSTALLER is not set +# CONFIG_LOCALE_SUPPORT is not set +# CONFIG_FEATURE_DEVFS is not set +CONFIG_FEATURE_DEVPTS=y +# CONFIG_FEATURE_CLEAN_UP is not set +CONFIG_FEATURE_SUID=y +# CONFIG_FEATURE_SUID_CONFIG is not set +# CONFIG_SELINUX is not set + +# +# Build Options +# +# CONFIG_STATIC is not set +CONFIG_LFS=y +# USING_CROSS_COMPILER is not set +EXTRA_CFLAGS_OPTIONS="" + +# +# Installation Options +# +# CONFIG_INSTALL_NO_USR is not set +PREFIX="./_install" + +# +# Archival Utilities +# +# CONFIG_AR is not set +CONFIG_BUNZIP2=y +# CONFIG_CPIO is not set +# CONFIG_DPKG is not set +# CONFIG_DPKG_DEB is not set +CONFIG_GUNZIP=y +# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set +CONFIG_GZIP=y +# CONFIG_RPM2CPIO is not set +# CONFIG_RPM is not set +CONFIG_TAR=y +CONFIG_FEATURE_TAR_CREATE=y +CONFIG_FEATURE_TAR_BZIP2=y +# CONFIG_FEATURE_TAR_FROM is not set +CONFIG_FEATURE_TAR_GZIP=y +# CONFIG_FEATURE_TAR_COMPRESS is not set +# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set +CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y +# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set +# CONFIG_UNCOMPRESS is not set +CONFIG_UNZIP=y + +# +# Common options for cpio and tar +# +# CONFIG_FEATURE_UNARCHIVE_TAPE is not set + +# +# Coreutils +# +CONFIG_BASENAME=y +# CONFIG_CAL is not set +CONFIG_CAT=y +CONFIG_CHGRP=y +CONFIG_CHMOD=y +CONFIG_CHOWN=y +CONFIG_CHROOT=y +CONFIG_CMP=y +# CONFIG_COMM is not set +CONFIG_CP=y +CONFIG_CUT=y +CONFIG_DATE=y +CONFIG_FEATURE_DATE_ISOFMT=y +CONFIG_DD=y +CONFIG_DF=y +CONFIG_DIRNAME=y +CONFIG_DOS2UNIX=y +CONFIG_UNIX2DOS=y +CONFIG_DU=y +CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y +CONFIG_ECHO=y +CONFIG_FEATURE_FANCY_ECHO=y +CONFIG_ENV=y +# CONFIG_PRINTENV is not set +CONFIG_EXPR=y +CONFIG_FALSE=y +# CONFIG_FOLD is not set +CONFIG_HEAD=y +# CONFIG_FEATURE_FANCY_HEAD is not set +CONFIG_HOSTID=y +CONFIG_ID=y +CONFIG_INSTALL=y +# CONFIG_LENGTH is not set +CONFIG_LN=y +CONFIG_LOGNAME=y +CONFIG_LS=y +CONFIG_FEATURE_LS_FILETYPES=y +CONFIG_FEATURE_LS_FOLLOWLINKS=y +CONFIG_FEATURE_LS_RECURSIVE=y +CONFIG_FEATURE_LS_SORTFILES=y +CONFIG_FEATURE_LS_TIMESTAMPS=y +CONFIG_FEATURE_LS_USERNAME=y +CONFIG_FEATURE_LS_COLOR=y +CONFIG_MD5SUM=y +CONFIG_MKDIR=y +# CONFIG_MKFIFO is not set +CONFIG_MKNOD=y +CONFIG_MV=y +# CONFIG_NICE is not set +# CONFIG_OD is not set +# CONFIG_PRINTF is not set +CONFIG_PWD=y +# CONFIG_REALPATH is not set +CONFIG_RM=y +CONFIG_RMDIR=y +# CONFIG_SEQ is not set +CONFIG_SHA1SUM=y +CONFIG_SLEEP=y +# CONFIG_FEATURE_FANCY_SLEEP is not set +CONFIG_SORT=y +CONFIG_SORT_BIG=y +# CONFIG_STAT is not set +CONFIG_STTY=y +# CONFIG_SUM is not set +CONFIG_SYNC=y +CONFIG_TAIL=y +CONFIG_FEATURE_FANCY_TAIL=y +CONFIG_TEE=y +CONFIG_FEATURE_TEE_USE_BLOCK_IO=y +CONFIG_TEST=y + +# +# test (forced enabled for use with shell) +# +CONFIG_FEATURE_TEST_64=y +CONFIG_TOUCH=y +# CONFIG_TR is not set +CONFIG_TRUE=y +CONFIG_TTY=y +CONFIG_UNAME=y +CONFIG_UNIQ=y +CONFIG_USLEEP=y +CONFIG_UUDECODE=y +CONFIG_UUENCODE=y +# CONFIG_WATCH is not set +CONFIG_WC=y +# CONFIG_WHO is not set +CONFIG_WHOAMI=y +CONFIG_YES=y + +# +# Common options for cp and mv +# +CONFIG_FEATURE_PRESERVE_HARDLINKS=y + +# +# Common options for ls and more +# +CONFIG_FEATURE_AUTOWIDTH=y + +# +# Common options for df, du, ls +# +CONFIG_FEATURE_HUMAN_READABLE=y + +# +# Common options for md5sum, sha1sum +# +CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y + +# +# Console Utilities +# +CONFIG_CHVT=y +CONFIG_CLEAR=y +CONFIG_DEALLOCVT=y +# CONFIG_DUMPKMAP is not set +# CONFIG_LOADFONT is not set +# CONFIG_LOADKMAP is not set +CONFIG_OPENVT=y +CONFIG_RESET=y +# CONFIG_SETKEYCODES is not set + +# +# Debian Utilities +# +CONFIG_MKTEMP=y +# CONFIG_PIPE_PROGRESS is not set +CONFIG_READLINK=y +CONFIG_FEATURE_READLINK_FOLLOW=y +CONFIG_RUN_PARTS=y +CONFIG_START_STOP_DAEMON=y +CONFIG_WHICH=y + +# +# Linux Ext2 FS Progs +# +# CONFIG_CHATTR is not set +# CONFIG_LSATTR is not set + +# +# Editors +# +# CONFIG_AWK is not set +# CONFIG_PATCH is not set +CONFIG_SED=y +CONFIG_VI=y +CONFIG_FEATURE_VI_COLON=y +CONFIG_FEATURE_VI_YANKMARK=y +CONFIG_FEATURE_VI_SEARCH=y +CONFIG_FEATURE_VI_USE_SIGNALS=y +CONFIG_FEATURE_VI_DOT_CMD=y +CONFIG_FEATURE_VI_READONLY=y +CONFIG_FEATURE_VI_SETOPTS=y +CONFIG_FEATURE_VI_SET=y +CONFIG_FEATURE_VI_WIN_RESIZE=y +CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y + +# +# Finding Utilities +# +CONFIG_FIND=y +CONFIG_FEATURE_FIND_MTIME=y +CONFIG_FEATURE_FIND_PERM=y +CONFIG_FEATURE_FIND_TYPE=y +CONFIG_FEATURE_FIND_XDEV=y +# CONFIG_FEATURE_FIND_NEWER is not set +# CONFIG_FEATURE_FIND_INUM is not set +CONFIG_GREP=y +CONFIG_FEATURE_GREP_EGREP_ALIAS=y +CONFIG_FEATURE_GREP_FGREP_ALIAS=y +CONFIG_FEATURE_GREP_CONTEXT=y +CONFIG_XARGS=y +# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set +CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y +CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y +CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y + +# +# Init Utilities +# +CONFIG_INIT=y +CONFIG_FEATURE_USE_INITTAB=y +CONFIG_FEATURE_INITRD=y +# CONFIG_FEATURE_INIT_COREDUMPS is not set +CONFIG_FEATURE_EXTRA_QUIET=y +CONFIG_HALT=y +CONFIG_POWEROFF=y +CONFIG_REBOOT=y +# CONFIG_MESG is not set + +# +# Login/Password Management Utilities +# +# CONFIG_USE_BB_PWD_GRP is not set +CONFIG_ADDGROUP=y +CONFIG_DELGROUP=y +CONFIG_ADDUSER=y +CONFIG_DELUSER=y +CONFIG_GETTY=y +# CONFIG_FEATURE_U_W_TMP is not set +CONFIG_LOGIN=y +CONFIG_FEATURE_SECURETTY=y +CONFIG_PASSWD=y +CONFIG_SU=y +CONFIG_SULOGIN=y +CONFIG_VLOCK=y + +# +# Common options for adduser, deluser, login, su +# +CONFIG_FEATURE_SHADOWPASSWDS=y + +# +# Miscellaneous Utilities +# +# CONFIG_ADJTIMEX is not set +# CONFIG_CROND is not set +# CONFIG_CRONTAB is not set +CONFIG_DC=y +# CONFIG_DEVFSD is not set +# CONFIG_EJECT is not set +# CONFIG_LAST is not set +# CONFIG_HDPARM is not set +# CONFIG_MAKEDEVS is not set +CONFIG_MT=y +# CONFIG_RX is not set +CONFIG_STRINGS=y +CONFIG_TIME=y +# CONFIG_WATCHDOG is not set + +# +# Linux Module Utilities +# +CONFIG_INSMOD=y +CONFIG_FEATURE_2_4_MODULES=y +# CONFIG_FEATURE_2_6_MODULES is not set +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +CONFIG_LSMOD=y +CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y +CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y +CONFIG_MODPROBE=y +CONFIG_RMMOD=y +CONFIG_FEATURE_CHECK_TAINTED_MODULE=y + +# +# Networking Utilities +# +# CONFIG_FEATURE_IPV6 is not set +# CONFIG_ARPING is not set +# CONFIG_ETHER_WAKE is not set +# CONFIG_FAKEIDENTD is not set +# CONFIG_FTPGET is not set +# CONFIG_FTPPUT is not set +CONFIG_HOSTNAME=y +# CONFIG_HTTPD is not set +CONFIG_IFCONFIG=y +CONFIG_FEATURE_IFCONFIG_STATUS=y +# CONFIG_FEATURE_IFCONFIG_SLIP is not set +# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set +# CONFIG_FEATURE_IFCONFIG_HW is not set +# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set +CONFIG_IFUPDOWN=y +# CONFIG_FEATURE_IFUPDOWN_IP is not set +CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y +CONFIG_FEATURE_IFUPDOWN_IPV4=y +# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set +# CONFIG_FEATURE_IFUPDOWN_IPX is not set +# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set +# CONFIG_INETD is not set +# CONFIG_IP is not set +# CONFIG_IPCALC is not set +# CONFIG_IPADDR is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_NAMEIF is not set +# CONFIG_NC is not set +CONFIG_NETSTAT=y +CONFIG_NSLOOKUP=y +CONFIG_PING=y +CONFIG_FEATURE_FANCY_PING=y +CONFIG_ROUTE=y +CONFIG_TELNET=y +CONFIG_FEATURE_TELNET_TTYPE=y +# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set +# CONFIG_TELNETD is not set +# CONFIG_TFTP is not set +# CONFIG_TRACEROUTE is not set +# CONFIG_VCONFIG is not set +CONFIG_WGET=y +CONFIG_FEATURE_WGET_STATUSBAR=y +CONFIG_FEATURE_WGET_AUTHENTICATION=y +# CONFIG_FEATURE_WGET_IP6_LITERAL is not set + +# +# udhcp Server/Client +# +CONFIG_UDHCPD=y +CONFIG_UDHCPC=y +CONFIG_DUMPLEASES=y +CONFIG_FEATURE_UDHCP_SYSLOG=y +# CONFIG_FEATURE_UDHCP_DEBUG is not set +# CONFIG_ZCIP is not set + +# +# Process Utilities +# +CONFIG_FREE=y +CONFIG_KILL=y +CONFIG_KILLALL=y +CONFIG_PIDOF=y +CONFIG_PS=y +# CONFIG_RENICE is not set +# CONFIG_TOP is not set +CONFIG_UPTIME=y +# CONFIG_SYSCTL is not set + +# +# Another Bourne-like Shell +# +CONFIG_FEATURE_SH_IS_ASH=y +# CONFIG_FEATURE_SH_IS_HUSH is not set +# CONFIG_FEATURE_SH_IS_LASH is not set +# CONFIG_FEATURE_SH_IS_MSH is not set +# CONFIG_FEATURE_SH_IS_NONE is not set +CONFIG_ASH=y + +# +# Ash Shell Options +# +CONFIG_ASH_JOB_CONTROL=y +# CONFIG_ASH_TIMEOUT is not set +CONFIG_ASH_ALIAS=y +CONFIG_ASH_MATH_SUPPORT=y +CONFIG_ASH_MATH_SUPPORT_64=y +# CONFIG_ASH_GETOPTS is not set +# CONFIG_ASH_CMDCMD is not set +# CONFIG_ASH_MAIL is not set +CONFIG_ASH_OPTIMIZE_FOR_SIZE=y +# CONFIG_ASH_RANDOM_SUPPORT is not set +# CONFIG_HUSH is not set +# CONFIG_LASH is not set +# CONFIG_MSH is not set + +# +# Bourne Shell Options +# +# CONFIG_FEATURE_SH_EXTRA_QUIET is not set +# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set +CONFIG_FEATURE_COMMAND_EDITING=y +CONFIG_FEATURE_COMMAND_HISTORY=15 +CONFIG_FEATURE_COMMAND_SAVEHISTORY=y +CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y +# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set +CONFIG_FEATURE_SH_FANCY_PROMPT=y + +# +# System Logging Utilities +# +CONFIG_SYSLOGD=y +CONFIG_FEATURE_ROTATE_LOGFILE=y +# CONFIG_FEATURE_REMOTE_LOG is not set +# CONFIG_FEATURE_IPC_SYSLOG is not set +CONFIG_KLOGD=y +CONFIG_LOGGER=y + +# +# Linux System Utilities +# +CONFIG_DMESG=y +# CONFIG_FBSET is not set +# CONFIG_FDFLUSH is not set +CONFIG_FDFORMAT=y +CONFIG_FDISK=y +FDISK_SUPPORT_LARGE_DISKS=y +CONFIG_FEATURE_FDISK_WRITABLE=y +# CONFIG_FEATURE_AIX_LABEL is not set +# CONFIG_FEATURE_SGI_LABEL is not set +# CONFIG_FEATURE_SUN_LABEL is not set +# CONFIG_FEATURE_OSF_LABEL is not set +# CONFIG_FEATURE_FDISK_ADVANCED is not set +# CONFIG_FREERAMDISK is not set +# CONFIG_FSCK_MINIX is not set +# CONFIG_MKFS_MINIX is not set +CONFIG_GETOPT=y +CONFIG_HEXDUMP=y +CONFIG_HWCLOCK=y +CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y +# CONFIG_LOSETUP is not set +# CONFIG_MKSWAP is not set +CONFIG_MORE=y +CONFIG_FEATURE_USE_TERMIOS=y +CONFIG_PIVOT_ROOT=y +CONFIG_RDATE=y +CONFIG_SWAPONOFF=y +CONFIG_MOUNT=y +# CONFIG_NFSMOUNT is not set +CONFIG_UMOUNT=y +# CONFIG_FEATURE_MOUNT_FORCE is not set + +# +# Common options for mount/umount +# +CONFIG_FEATURE_MOUNT_LOOP=y +# CONFIG_FEATURE_MTAB_SUPPORT is not set +# CONFIG_READPROFILE is not set + +# +# Debugging Options +# +# CONFIG_DEBUG is not set diff --git a/target/device/jp/q5/depmod.pl b/target/device/jp/q5/depmod.pl new file mode 100755 index 000000000..5e8d5f38e --- /dev/null +++ b/target/device/jp/q5/depmod.pl @@ -0,0 +1,237 @@ +#!/usr/bin/perl -w +# vi: set ts=4: +# Copyright (c) 2001 David Schleef +# Copyright (c) 2001 Erik Andersen +# Copyright (c) 2001 Stuart Hughes +# Copyright (c) 2002 Steven J. Hill +# This program is free software; you can redistribute it and/or modify it +# under the same terms as Perl itself. + +# TODO -- use strict mode... +#use strict; + +use Getopt::Long; +use File::Find; + + +# Set up some default values + +my $basedir=""; +my $kernel; +my $kernelsyms; +my $stdout=0; +my $verbose=0; + + +# get command-line options + +my %opt; + +GetOptions( + \%opt, + "help|h", + "basedir|b=s" => \$basedir, + "kernel|k=s" => \$kernel, + "kernelsyms|F=s" => \$kernelsyms, + "stdout|n" => \$stdout, + "verbose|v" => \$verbose, +); + +if (defined $opt{help}) { + print + " $0 [OPTION]... [basedir]\n", + " -h --help\t\tShow this help screen\n", + " -b --basedir\tModules base directory (defaults to /lib/modules)\n", + " -k --kernel\tKernel binary for the target\n", + " -F --kernelsyms\tKernel symbol file\n", + " -n --stdout\tWrite to stdout instead of /modules.dep\n", + " -v --verbose\tPrint out lots of debugging stuff\n", + ; + exit 1; +} + +if($basedir !~ m-/lib/modules-) { + warn "WARNING: base directory does not match ..../lib/modules\n"; +} + +# Find the list of .o files living under $basedir +#if ($verbose) { printf "Locating all modules\n"; } +my($ofile) = ""; +my($file) = ""; +my(@liblist) = (); +find sub { + if ( -f $_ && ! -d $_ ) { + $file = $File::Find::name; + if ( $file =~ /.o$/ ) { + push(@liblist, $file); + if ($verbose) { printf "$file\n"; } + } + } +}, $basedir; +if ($verbose) { printf "Finished locating modules\n"; } + +foreach $obj ( @liblist, $kernel ){ + # turn the input file name into a target tag name + # vmlinux is a special that is only used to resolve symbols + if($obj =~ /vmlinux/) { + $tgtname = "vmlinux"; + } else { + ($tgtname) = $obj =~ m-(/lib/modules/.*)$-; + } + + warn "MODULE = $tgtname\n" if $verbose; + + # get a list of symbols + @output=`nm $obj`; + $ksymtab=grep m/ __ksymtab/, @output; + + # gather the exported symbols + if($ksymtab){ + # explicitly exported + foreach ( @output ) { + / __ksymtab_(.*)$/ and do { + warn "sym = $1\n" if $verbose; + $exp->{$1} = $tgtname; + }; + } + } else { + # exporting all symbols + foreach ( @output) { + / [ABCDGRST] (.*)$/ and do { + warn "syma = $1\n" if $verbose; + $exp->{$1} = $tgtname; + }; + } + } + # gather the unresolved symbols + foreach ( @output ) { + !/ __this_module/ && / U (.*)$/ and do { + warn "und = $1\n" if $verbose; + push @{$dep->{$tgtname}}, $1; + }; + } +} + + +# reduce dependancies: remove unresolvable and resolved from vmlinux +# remove duplicates +foreach $module (keys %$dep) { + $mod->{$module} = {}; + foreach (@{$dep->{$module}}) { + if( $exp->{$_} ) { + warn "resolved symbol $_ in file $exp->{$_}\n" if $verbose; + next if $exp->{$_} =~ /vmlinux/; + $mod->{$module}{$exp->{$_}} = 1; + } else { + warn "unresolved symbol $_ in file $module\n"; + } + } +} + +# resolve the dependancies for each module +if ($stdout == 1) { + foreach $module ( keys %$mod ) { + print "$module:\t"; + @sorted = sort bydep keys %{$mod->{$module}}; + print join(" \\\n\t",@sorted); + print "\n\n"; + } +} else { + open(OFILE, ">$basedir/modules.dep"); + foreach $module ( keys %$mod ) { + print OFILE "$module:\t"; + @sorted = sort bydep keys %{$mod->{$module}}; + print OFILE join(" \\\n\t",@sorted); + print OFILE "\n\n"; + } +} + + +sub bydep +{ + foreach my $f ( keys %{$mod->{$b}} ) { + if($f eq $a) { + return 1; + } + } + return -1; +} + + + +__END__ + +=head1 NAME + +depmod.pl - a cross platform script to generate kernel module dependency + lists which can then be used by modprobe. + +=head1 SYNOPSIS + +depmod.pl [OPTION]... [basedir]... + +Example: + + depmod.pl -F linux/System.map target/lib/modules + +=head1 DESCRIPTION + +The purpose of this script is to automagically generate a list of of kernel +module dependancies. This script produces dependancy lists that should be +identical to the depmod program from the modutils package. Unlike the depmod +binary, however, depmod.pl is designed to be run on your host system, not +on your target system. + +This script was written by David Schleef to be used in +conjunction with the BusyBox modprobe applet. + +=head1 OPTIONS + +=over 4 + +=item B<-h --help> + +This displays the help message. + +=item B<-b --basedir> + +The base directory uner which the target's modules will be found. This +defaults to the /lib/modules directory. + +=item B<-k --kernel> + +Kernel binary for the target. You must either supply a kernel binary +or a kernel symbol file (using the -F option). + +=item B<-F --kernelsyms> + +Kernel symbol file for the target. You must supply either a kernel symbol file +kernel binary for the target (using the -k option). + +=item B<-n --stdout> + +Write to stdout instead of modules.dep. This is currently hard coded... +kernel binary for the target (using the -k option). + +=item B<--verbose> + +Be verbose (not implemented) + +=back + +=head1 COPYRIGHT + +Copyright (c) 2001 David Schleef +Copyright (c) 2001 Erik Andersen +Copyright (c) 2001 Stuart Hughes +This program is free software; you can redistribute it and/or modify it +under the same terms as Perl itself. + +=head1 AUTHOR + +David Schleef + +=cut + +# $Id: depmod.pl,v 1.1 2004/12/08 01:34:41 andersen Exp $ + diff --git a/target/device/jp/q5/device_table.txt b/target/device/jp/q5/device_table.txt new file mode 100644 index 000000000..8b46ca032 --- /dev/null +++ b/target/device/jp/q5/device_table.txt @@ -0,0 +1,162 @@ +# When building a target filesystem, it is desirable to not have to +# become root and then run 'mknod' a thousand times. Using a device +# table you can create device nodes and directories "on the fly". +# +# This is a sample device table file for use with genext2fs. You can +# do all sorts of interesting things with a device table file. For +# example, if you want to adjust the permissions on a particular file +# you can just add an entry like: +# /sbin/foobar f 2755 0 0 - - - - - +# and (assuming the file /sbin/foobar exists) it will be made setuid +# root (regardless of what its permissions are on the host filesystem. +# Furthermore, you can use a single table entry to create a many device +# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] +# I could just use the following two table entries: +# /dev/hda b 640 0 0 3 0 0 0 - +# /dev/hda b 640 0 0 3 1 1 1 15 +# +# Device table entries take the form of: +# +# where name is the file name, type can be one of: +# f A regular file +# d Directory +# c Character special device file +# b Block special device file +# p Fifo (named pipe) +# uid is the user id for the target file, gid is the group id for the +# target file. The rest of the entries (major, minor, etc) apply only +# to device special files. + +# Have fun +# -Erik Andersen +# + +# +/dev d 755 0 0 - - - - - +/dev/pts d 755 0 0 - - - - - +/tmp d 1777 0 0 - - - - - +/etc d 755 0 0 - - - - - +/home/default d 2755 1000 1000 - - - - - +# +/bin/busybox f 4755 0 0 - - - - - +/etc/shadow f 600 0 0 - - - - - +/etc/passwd f 644 0 0 - - - - - +/etc/network/if-up.d d 755 0 0 - - - - - +/etc/network/if-pre-up.d d 755 0 0 - - - - - +/etc/network/if-down.d d 755 0 0 - - - - - +/etc/network/if-post-down.d d 755 0 0 - - - - - +/usr/share/udhcpc/default.script f 755 0 0 - - - - - +# uncomment this to allow starting x as non-root +#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - - +# Normal system devices +/dev/mem c 640 0 0 1 1 0 0 - +/dev/kmem c 640 0 0 1 2 0 0 - +/dev/null c 666 0 0 1 3 0 0 - +/dev/zero c 666 0 0 1 5 0 0 - +/dev/random c 666 0 0 1 8 0 0 - +/dev/urandom c 666 0 0 1 9 0 0 - +/dev/ram b 640 0 0 1 1 0 0 - +/dev/ram b 640 0 0 1 0 0 1 4 +/dev/loop b 640 0 0 7 0 0 1 2 +/dev/rtc c 640 0 0 10 135 - - - +/dev/console c 666 0 0 5 1 - - - +/dev/tty c 666 0 0 5 0 - - - +/dev/tty c 666 0 0 4 0 0 1 8 +/dev/ttyp c 666 0 0 3 0 0 1 10 +/dev/ptyp c 666 0 0 2 0 0 1 10 +/dev/ptmx c 666 0 0 5 2 - - - +/dev/ttyP c 666 0 0 57 0 0 1 4 +/dev/ttyS c 666 0 0 4 64 0 1 4 +/dev/fb c 640 0 5 29 0 0 32 4 +#/dev/ttySA c 666 0 0 204 5 0 1 3 +/dev/psaux c 666 0 0 10 1 0 0 - +#/dev/ppp c 666 0 0 108 0 - - - + +# MTD stuff +/dev/mtd c 640 0 0 90 0 0 2 4 +/dev/mtdblock b 640 0 0 31 0 0 1 4 + +#Tun/tap driver +/dev/net d 755 0 0 - - - - - +/dev/net/tun c 660 0 0 10 200 - - - + +# Audio stuff +#/dev/audio c 666 0 29 14 4 - - - +#/dev/audio1 c 666 0 29 14 20 - - - +#/dev/dsp c 666 0 29 14 3 - - - +#/dev/dsp1 c 666 0 29 14 19 - - - +#/dev/sndstat c 666 0 29 14 6 - - - + +# User-mode Linux stuff +/dev/ubda b 640 0 0 98 0 0 0 - +/dev/ubda b 640 0 0 98 1 1 1 15 + +# IDE Devices +/dev/hda b 640 0 0 3 0 0 0 - +/dev/hda b 640 0 0 3 1 1 1 15 +/dev/hdb b 640 0 0 3 64 0 0 - +/dev/hdb b 640 0 0 3 65 1 1 15 +#/dev/hdc b 640 0 0 22 0 0 0 - +#/dev/hdc b 640 0 0 22 1 1 1 15 +#/dev/hdd b 640 0 0 22 64 0 0 - +#/dev/hdd b 640 0 0 22 65 1 1 15 +#/dev/hde b 640 0 0 33 0 0 0 - +#/dev/hde b 640 0 0 33 1 1 1 15 +#/dev/hdf b 640 0 0 33 64 0 0 - +#/dev/hdf b 640 0 0 33 65 1 1 15 +#/dev/hdg b 640 0 0 34 0 0 0 - +#/dev/hdg b 640 0 0 34 1 1 1 15 +#/dev/hdh b 640 0 0 34 64 0 0 - +#/dev/hdh b 640 0 0 34 65 1 1 15 + +# SCSI Devices +#/dev/sda b 640 0 0 8 0 0 0 - +#/dev/sda b 640 0 0 8 1 1 1 15 +#/dev/sdb b 640 0 0 8 16 0 0 - +#/dev/sdb b 640 0 0 8 17 1 1 15 +#/dev/sdc b 640 0 0 8 32 0 0 - +#/dev/sdc b 640 0 0 8 33 1 1 15 +#/dev/sdd b 640 0 0 8 48 0 0 - +#/dev/sdd b 640 0 0 8 49 1 1 15 +#/dev/sde b 640 0 0 8 64 0 0 - +#/dev/sde b 640 0 0 8 65 1 1 15 +#/dev/sdf b 640 0 0 8 80 0 0 - +#/dev/sdf b 640 0 0 8 81 1 1 15 +#/dev/sdg b 640 0 0 8 96 0 0 - +#/dev/sdg b 640 0 0 8 97 1 1 15 +#/dev/sdh b 640 0 0 8 112 0 0 - +#/dev/sdh b 640 0 0 8 113 1 1 15 +#/dev/sg c 640 0 0 21 0 0 1 15 +#/dev/scd b 640 0 0 11 0 0 1 15 +#/dev/st c 640 0 0 9 0 0 1 8 +#/dev/nst c 640 0 0 9 128 0 1 8 +#/dev/st c 640 0 0 9 32 1 1 4 +#/dev/st c 640 0 0 9 64 1 1 4 +#/dev/st c 640 0 0 9 96 1 1 4 + +# Floppy disk devices +#/dev/fd b 640 0 0 2 0 0 1 2 +#/dev/fd0d360 b 640 0 0 2 4 0 0 - +#/dev/fd1d360 b 640 0 0 2 5 0 0 - +#/dev/fd0h1200 b 640 0 0 2 8 0 0 - +#/dev/fd1h1200 b 640 0 0 2 9 0 0 - +#/dev/fd0u1440 b 640 0 0 2 28 0 0 - +#/dev/fd1u1440 b 640 0 0 2 29 0 0 - +#/dev/fd0u2880 b 640 0 0 2 32 0 0 - +#/dev/fd1u2880 b 640 0 0 2 33 0 0 - + +# All the proprietary cdrom devices in the world +#/dev/aztcd b 640 0 0 29 0 0 0 - +#/dev/bpcd b 640 0 0 41 0 0 0 - +#/dev/capi20 c 640 0 0 68 0 0 1 2 +#/dev/cdu31a b 640 0 0 15 0 0 0 - +#/dev/cdu535 b 640 0 0 24 0 0 0 - +#/dev/cm206cd b 640 0 0 32 0 0 0 - +#/dev/sjcd b 640 0 0 18 0 0 0 - +#/dev/sonycd b 640 0 0 15 0 0 0 - +#/dev/gscd b 640 0 0 16 0 0 0 - +#/dev/sbpcd b 640 0 0 25 0 0 0 - +#/dev/sbpcd b 640 0 0 25 0 0 1 4 +#/dev/mcd b 640 0 0 23 0 0 0 - +#/dev/optcd b 640 0 0 17 0 0 0 - + diff --git a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 b/target/device/jp/q5/kernel-patches-2.4.26/001-q5 new file mode 100644 index 000000000..70ca0c555 --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.26/001-q5 @@ -0,0 +1,730 @@ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100 +@@ -16,7 +16,7 @@ all: au1000.o + + O_TARGET := au1000.o + +-export-objs = prom.o clocks.o power.o usbdev.o ++export-objs = prom.o clocks.o power.o usbdev.o setup.o + + obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \ + clocks.o power.o setup.o sleeper.o +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100 +@@ -105,42 +105,8 @@ void __init pcibios_fixup(void) + + void __init pcibios_fixup_irqs(void) + { +-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) +- unsigned int slot, func; +- unsigned char pin; +- struct pci_dev *dev; +- +- pci_for_each_dev(dev) { +- if (dev->bus->number != 0) +- return; +- +- dev->irq = 0xff; +- slot = PCI_SLOT(dev->devfn); +-#if defined( CONFIG_SOC_AU1500 ) +- switch (slot) { +- case 12: +- case 13: +- default: +- dev->irq = AU1000_PCI_INTA; +- break; +- } +-#elif defined( CONFIG_SOC_AU1550 ) +- switch (slot) { +- default: +- case 12: +- dev->irq = AU1000_PCI_INTA; +- break; +- case 13: +- dev->irq = AU1000_PCI_INTB; +- break; +- } +-#endif +- +- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); +- DBG("slot %d irq %d\n", slot, dev->irq); +- } +-#endif + } ++ + unsigned int pcibios_assign_all_busses(void) + { + return 0; +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100 +@@ -81,7 +81,7 @@ void prom_init_cmdline(void) + } + + +-char *prom_getenv(char *envname) ++char *prom_getenv_n(char *envname, int n) + { + /* + * Return a pointer to the given environment variable. +@@ -89,19 +89,24 @@ char *prom_getenv(char *envname) + */ + + t_env_var *env = (t_env_var *)prom_envp; +- int i; ++ int i, j=0; + + i = strlen(envname); + + while(env->name) { + if(strncmp(envname, env->name, i) == 0) { +- return(env->name + strlen(envname) + 1); ++ if(j++ == n) return(env->name + strlen(envname) + 1); + } + env++; + } + return(NULL); + } + ++char *prom_getenv(char *envname) ++{ ++ return prom_getenv_n(envname, 0); ++} ++ + inline unsigned char str2hexnum(unsigned char c) + { + if(c >= '0' && c <= '9') +@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea, + } + } + +-int get_ethernet_addr(char *ethernet_addr) ++int get_ethernet_addr_n(char *ethernet_addr, int n) + { + char *ethaddr_str; + +- ethaddr_str = prom_getenv("ethaddr"); ++ ethaddr_str = prom_getenv_n("ethaddr", n); + if (!ethaddr_str) { + printk("ethaddr not set in boot prom\n"); + return -1; + } + str2eaddr(ethernet_addr, ethaddr_str); + +-#if 0 ++#if 1 + { + int i; + +@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add + return 0; + } + ++int get_ethernet_addr(char *ethernet_addr) ++{ ++ return get_ethernet_addr_n(ethernet_addr, 0); ++} ++ + void prom_free_prom_memory (void) {} ++EXPORT_SYMBOL(get_ethernet_addr_n); + EXPORT_SYMBOL(prom_getcmdline); + EXPORT_SYMBOL(get_ethernet_addr); + EXPORT_SYMBOL(str2eaddr); +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100 +@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops; + #endif + + extern struct rtc_ops no_rtc_ops; ++void (*__wbflush) (void); + extern char * __init prom_getcmdline(void); + extern void __init board_setup(void); + extern void au1000_restart(char *); +@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr( + extern void au1xxx_time_init(void); + extern void au1xxx_timer_setup(void); + ++void au1500_wbflush(void) ++{ ++ __asm__ volatile ("sync"); ++} ++ + void __init au1x00_setup(void) + { + char *argptr; +@@ -89,6 +95,8 @@ void __init au1x00_setup(void) + } + #endif + ++ __wbflush = au1500_wbflush; ++ + #ifdef CONFIG_FB_AU1100 + if ((argptr = strstr(argptr, "video=")) == NULL) { + argptr = prom_getcmdline(); +@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr( + return phys_addr; + } + #endif ++ ++EXPORT_SYMBOL(__wbflush); ++ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c +--- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100 +@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, + { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, + + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S +--- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100 +@@ -33,7 +33,9 @@ + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. + */ +- .fill 0x400 ++ j kernel_entry ++ nop ++ .org 0x400 + + /* The following two symbols are used for kernel profiling. */ + EXPORT(stext) +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile +--- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200 +@@ -69,13 +69,13 @@ endif + set_gccflags = $(shell \ + while :; do \ + cpu=$(1); isa=-$(2); \ +- for gcc_opt in -march= -mcpu=; do \ ++ for gcc_opt in -march=; do \ + $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ + -xc /dev/null > /dev/null 2>&1 && \ + break 2; \ + done; \ + cpu=$(3); isa=-$(4); \ +- for gcc_opt in -march= -mcpu=; do \ ++ for gcc_opt in -march=; do \ + $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ + -xc /dev/null > /dev/null 2>&1 && \ + break 2; \ +@@ -90,7 +90,7 @@ else \ + fi; \ + gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ + while :; do \ +- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ ++ for gas_opt in -Wa,-march=; do \ + $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ + -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ + break 2; \ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c +--- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100 +@@ -29,6 +29,7 @@ + #include + #include + #include ++#include + + void kbd_leds(unsigned char leds) + { +@@ -140,3 +141,46 @@ void __init kbd_init_hw(void) + { + printk("Dummy keyboard driver installed.\n"); + } ++ ++ ++void panic_blink(void) ++ { ++ } ++ ++ ++ int pckbd_translate(unsigned char scancode, unsigned char *keycode, ++ char raw_mode) ++ { ++ return 0; ++ } ++ ++ char pckbd_unexpected_up(unsigned char keycode) ++ { ++ return 0; ++ } ++ ++ ++ void pckbd_leds(unsigned char leds) ++ { ++ } ++ ++ ++ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode) ++ { ++ return 0; ++ } ++ ++ int pckbd_getkeycode(unsigned int scancode) ++ { ++ return 0; ++ } ++ ++ void __init pckbd_init_hw(void) ++ { ++ } ++ ++ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) ++ { ++ return 0; ++ } ++ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile +--- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100 +@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4. + list-multi := + + KEYMAP =defkeymap.o +-KEYBD =pc_keyb.o ++KEYBD =dummy_keyb.o + CONSOLE =console.o + SERIAL =serial.o + +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100 +@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i + or tells us why it failed. */ + dq6 = CMD(1<<6); + dq5 = CMD(1<<5); +- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ ++ timeo = jiffies + HZ; /* setting timeout to 1ms for now */ + + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); +@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); + +- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { +- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); +- } else { ++ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) { + /* DQ5 is active so we can do a reset and stop the erase */ + cfi_write(map, CMD(0xF0), chip->start); + printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c +--- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100 +@@ -86,28 +86,24 @@ static int mtd_parts_n + #else + static struct mtd_partition physmap_partitions[] = { + /* Put your own partition definitions here */ +-#if 0 + { +- name: "bootROM", +- size: 0x80000, ++ name: "fs1", ++ size: 28*1024*1024, + offset: 0, +- mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { +- name: "zImage", +- size: 0x100000, ++ name: "bootldr", ++ size: 128*1024, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { +- name: "ramdisk.gz", +- size: 0x300000, ++ name: "kernel", ++ size: 1*1024*1024, + offset: MTDPART_OFS_APPEND, +- mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { +- name: "User FS", ++ name: "fs2", + size: MTDPART_SIZ_FULL, + offset: MTDPART_OFS_APPEND, + } +-#endif + }; + + #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition)) +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c +--- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100 +@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether + extern inline void str2eaddr(unsigned char *ea, unsigned char *str); + extern inline unsigned char str2hexnum(unsigned char c); + extern char * __init prom_getcmdline(void); ++extern int get_ethernet_addr_n(char *ethernet_addr, int n); + + /* + * Theory of operation +@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de + return 0; + } + ++int ns_83847_reset(struct net_device *dev, int phy_addr) ++ { ++ s16 mii_control, timeout; ++ ++ // printk("ns_reset\n"); ++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); ++ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); ++ mdelay(1); ++ for (timeout = 100; timeout > 0; --timeout) { ++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); ++ if ((mii_control & MII_CNTL_RESET) == 0) ++ break; ++ mdelay(1); ++ } ++ if (mii_control & MII_CNTL_RESET) { ++ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); ++ return -1; ++ } ++ return 0; ++ } ++ ++int ns_83847_init(struct net_device *dev, int phy_addr) ++ { ++ s16 data; ++ // printk("ns_init\n"); ++ ++ /* Stop auto-negotiation */ ++ // data = mdio_read(dev, phy_addr, MII_CONTROL); ++ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); ++ // mdio_write(dev, phy_addr, 0, 0x0000); ++ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */); ++ ++ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */ ++ data = mdio_read(dev, phy_addr, MII_ANADV); ++ /* obs PAUSE bit */ ++ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ; ++ mdio_write(dev, phy_addr, MII_ANADV, data); ++ ++ /* Bypass led stretching? */ ++ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL); ++ data |= MII_NS_PHYCTRL_BP_STRETCH; ++ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data); ++ ++ /* Restart auto-negotiation */ ++ data = mdio_read(dev, phy_addr, MII_CONTROL); ++ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; ++ mdio_write(dev, phy_addr, MII_CONTROL, data); ++ ++ return 0; ++ } ++ ++int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) ++ { ++ u16 mii_data; ++ struct au1000_private *aup; ++ ++ if (!dev) { ++ printk(KERN_ERR "ns_83847_status error: NULL dev\n"); ++ return -1; ++ } ++ aup = (struct au1000_private *) dev->priv; ++ ++ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); ++ // printk("ns_status: %04x\n", mii_data); ++ if (mii_data & MII_STAT_LINK) { ++ *link = 1; ++ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS); ++ if (mii_data & MII_NS_PHYSTS_SPEED_10) { ++ *speed = IF_PORT_10BASET; ++ dev->if_port = IF_PORT_10BASET; ++ } ++ else { ++ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) { ++ *speed = IF_PORT_100BASEFX; ++ dev->if_port = IF_PORT_100BASEFX; ++ } ++ else { ++ *speed = IF_PORT_100BASETX; ++ dev->if_port = IF_PORT_100BASETX; ++ } ++ } ++ ++ } ++ else { ++ *link = 0; ++ *speed = 0; ++ dev->if_port = IF_PORT_UNKNOWN; ++ } ++ return 0; ++ } ++ ++ ++ + #ifdef CONFIG_MIPS_BOSPORUS + int stub_init(struct net_device *dev, int phy_addr) + { +@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int + } + #endif + ++struct phy_ops ns_83847_ops = { ++ ns_83847_init, ++ ns_83847_reset, ++ ns_83847_status, ++}; ++ + struct phy_ops bcm_5201_ops = { + bcm_5201_init, + bcm_5201_reset, +@@ -667,6 +767,7 @@ static struct mii_chip_info { + struct phy_ops *phy_ops; + int dual_phy; + } mii_chip_table[] = { ++ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops }, + {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, + {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, + {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, +@@ -868,6 +969,8 @@ static int mii_probe (struct net_device + } + } + } ++ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name); ++ return -1; + found: + + #ifdef CONFIG_MIPS_BOSPORUS +@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po + switch (ioaddr) { + case AU1000_ETH0_BASE: + case AU1500_ETH0_BASE: +- /* check env variables first */ + if (!get_ethernet_addr(ethaddr)) { + memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); + } else { +- /* Check command line */ +- argptr = prom_getcmdline(); +- if ((pmac = strstr(argptr, "ethaddr=")) == NULL) { +- printk(KERN_INFO "%s: No mac address found\n", +- dev->name); +- /* use the hard coded mac addresses */ +- } else { +- str2eaddr(ethaddr, pmac + strlen("ethaddr=")); +- memcpy(au1000_mac_addr, ethaddr, +- sizeof(dev->dev_addr)); +- } ++ printk(KERN_INFO "%s: No mac address found\n", dev->name); + } + if (ioaddr == AU1000_ETH0_BASE) + aup->enable = (volatile u32 *) +@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po + + case AU1000_ETH1_BASE: + case AU1500_ETH1_BASE: ++ if (!get_ethernet_addr_n(ethaddr, 1)) { ++ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); ++ } else { ++ printk(KERN_INFO "%s: No mac address found\n", dev->name); ++ } + if (ioaddr == AU1000_ETH1_BASE) + aup->enable = (volatile u32 *) + ((unsigned long)AU1000_MAC1_ENABLE); +@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po + aup->enable = (volatile u32 *) + ((unsigned long)AU1500_MAC1_ENABLE); + memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr)); +- dev->dev_addr[4] += 0x10; + setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR); + aup->mac_id = 1; + au_macs[1] = aup; +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h +--- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100 +@@ -86,6 +86,28 @@ + #define MII_STAT_CAN_TX_FDX 0x4000 + #define MII_STAT_CAN_T4 0x8000 + ++/* mii registers for NS 83847 */ ++#define MII_NS_PHYSTS 0x10 ++#define MII_NS_FCSCR 0x14 ++#define MII_NS_RECR 0x15 ++#define MII_NS_PCSR 0x16 ++#define MII_NS_PHYCTRL 0x19 ++#define MII_NS_10BTSCR 0x1a ++#define MII_NS_CDCTRL 0x1b ++ ++/* MII_NS_PHYSTS bits */ ++#define MII_NS_PHYSTS_LINK (1) ++#define MII_NS_PHYSTS_SPEED_10 (1<<1) ++#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2) ++ ++/* MII_NS_PHYCTRL bits */ ++#define MII_NS_PHYCTRL_BP_STRETCH (1<<8) ++ ++/* MII_NS_CDCTRL bits */ ++#define MII_NS_CDCTRL_CD_ENABLE (1<<15) ++#define MII_NS_CDCTRL_RISETIME (1<<11) ++#define MII_NS_CDCTRL_FALLTIME (1<<9) ++ + + #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ + #define MII_ID1_MODEL 0x03F0 /* model number */ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c +--- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200 +@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str + goto err_ioremap; + } + +- /* Work around the dropped serial bit. */ ++#ifdef __mips__ ++ if (get_ethernet_addr_n(dev->dev_addr, 2)) { ++ printk(KERN_INFO "%s: No mac address found\n", dev->name); ++ } ++#else + prev_eedata = eeprom_read(ioaddr, 6); + for (i = 0; i < 3; i++) { + int eedata = eeprom_read(ioaddr, i + 7); +@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str + dev->dev_addr[i*2+1] = eedata >> 7; + prev_eedata = eedata; + } ++#endif + + dev->base_addr = ioaddr; + dev->irq = irq; +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h +--- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100 +@@ -302,9 +302,9 @@ typedef struct hermes_response { + #define hermes_read_reg(hw, off) ((hw)->io_space ? \ + inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ + readw((hw)->iobase + ( (off) << (hw)->reg_spacing ))) +-#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \ +- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ +- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ))) ++#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \ ++ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \ ++ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));} + + #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name)) + #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val))) +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h +--- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100 +@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] + #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 + + /* Interrupt Numbers */ +-#define AU1000_UART0_INT 0 ++#define AU1000_UART0_INT 3 + #define AU1000_UART1_INT 1 /* au1000 */ + #define AU1000_UART2_INT 2 /* au1000 */ + + #define AU1000_PCI_INTA 1 /* au1500 */ + #define AU1000_PCI_INTB 2 /* au1500 */ + +-#define AU1000_UART3_INT 3 ++#define AU1000_UART3_INT 0 + + #define AU1000_SSI0_INT 4 /* au1000 */ + #define AU1000_SSI1_INT 5 /* au1000 */ +@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] + + + /* UARTS 0-3 */ +-#define UART0_ADDR 0xB1100000 ++#define UART0_ADDR 0xB1400000 + #define UART1_ADDR 0xB1200000 + #define UART2_ADDR 0xB1300000 +-#define UART3_ADDR 0xB1400000 ++#define UART3_ADDR 0xB1100000 + #define UART_BASE UART0_ADDR +-#define UART_DEBUG_BASE UART3_ADDR ++#define UART_DEBUG_BASE UART0_ADDR + + #define UART_RX 0 /* Receive buffer */ + #define UART_TX 4 /* Transmit buffer */ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h +--- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100 +@@ -13,7 +13,6 @@ + #include + #include + +-#ifdef __KERNEL__ + + /* + * PAGE_SHIFT determines the page size +@@ -30,6 +29,7 @@ + #define PAGE_SIZE (1L << PAGE_SHIFT) + #define PAGE_MASK (~(PAGE_SIZE-1)) + ++#ifdef __KERNEL__ + #ifndef __ASSEMBLY__ + + #include +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h +--- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100 +@@ -15,8 +15,11 @@ + + #ifdef CONFIG_CPU_HAS_WB + +-extern void (*__wbflush)(void); +-extern void wbflush_setup(void); ++//extern void (*__wbflush)(void); ++//extern void wbflush_setup(void); ++ ++ ++#define __wbflush() { __asm__ volatile ("sync"); } + + #define wbflush() \ + do { \ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h +--- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100 +@@ -37,6 +37,7 @@ + #endif + + #if defined(__arm__) || defined(__mips__) ++//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus + typedef u_int ioaddr_t; + #else + typedef u_short ioaddr_t; +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h +--- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100 +@@ -112,7 +112,7 @@ typedef struct pccard_mem_map { + u_char map; + u_char flags; + u_short speed; +- u_long sys_start, sys_stop; ++ ioaddr_t sys_start, sys_stop; + u_int card_start; + } pccard_mem_map; + +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c +--- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100 ++++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100 +@@ -760,8 +760,6 @@ static void __init devfs_make_root(char + static void __init mount_root(void) + { + #ifdef CONFIG_ROOT_NFS +- if (MAJOR(ROOT_DEV) == NFS_MAJOR +- && MINOR(ROOT_DEV) == NFS_MINOR) { + if (mount_nfs_root()) { + sys_chdir("/root"); + ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev; +@@ -770,7 +768,6 @@ static void __init mount_root(void) + } + printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); + ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0); +- } + #endif + devfs_make_root(root_device_name); + create_dev("/dev/root", ROOT_DEV, root_device_name); + diff --git a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes new file mode 100644 index 000000000..a5928504e --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes @@ -0,0 +1,81 @@ +diff -Naur linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c linux-2.4.26-q5/arch/mips/au1000/common/clocks.c +--- linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c 2003-08-25 07:44:39.000000000 -0400 ++++ linux-2.4.26-q5/arch/mips/au1000/common/clocks.c 2005-06-23 02:52:03.390000000 -0400 +@@ -85,9 +85,8 @@ + lcd_clock = sys_busclk / 4; + + if (lcd_clock > 50000) /* Epson MAX */ +- printk(__FUNCTION__ +- ": warning: LCD clock too high (%d KHz)\n", +- lcd_clock); ++ printk("%s: warning: LCD clock too high (%d KHz)\n", ++ __FUNCTION__, lcd_clock); + } + + unsigned int get_au1x00_lcd_clock(void) +--- linux-2.4.26-q5.org/arch/mips/kernel/time.c 2004-02-18 08:36:30.000000000 -0500 ++++ linux-2.4.26-q5/arch/mips/kernel/time.c 2005-06-23 03:13:07.720000000 -0400 +@@ -25,6 +25,7 @@ + #include + #include + ++#include + #include + #include + #include +@@ -242,7 +243,7 @@ + __asm__("multu %1,%2" + : "=h" (res) + : "r" (count), "r" (sll32_usecs_per_cycle) +- : "lo", "accum"); ++ : "lo", GCC_REG_ACCUM); + + /* + * Due to possible jiffies inconsistencies, we need to check +@@ -297,7 +298,7 @@ + __asm__("multu %1,%2" + : "=h" (res) + : "r" (count), "r" (quotient) +- : "lo", "accum"); ++ : "lo", GCC_REG_ACCUM); + + /* + * Due to possible jiffies inconsistencies, we need to check +@@ -339,7 +340,7 @@ + : "r" (timerhi), "m" (timerlo), + "r" (tmp), "r" (USECS_PER_JIFFY), + "r" (USECS_PER_JIFFY_FRAC) +- : "hi", "lo", "accum"); ++ : "hi", "lo", GCC_REG_ACCUM); + cached_quotient = quotient; + } + } +@@ -353,7 +354,7 @@ + __asm__("multu %1,%2" + : "=h" (res) + : "r" (count), "r" (quotient) +- : "lo", "accum"); ++ : "lo", GCC_REG_ACCUM); + + /* + * Due to possible jiffies inconsistencies, we need to checkdiff -Naur linux-2.4.26-q5.org/include/asm-mips/compiler.h linux-2.4.26-q5/include/asm-mips/compiler.h +--- linux-2.4.26-q5.org/include/asm-mips/compiler.h 1969-12-31 19:00:00.000000000 -0500 ++++ linux-2.4.26-q5/include/asm-mips/compiler.h 2005-06-23 02:52:25.000000000 -0400 +@@ -0,0 +1,17 @@ ++/* ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ */ ++#ifndef _ASM_COMPILER_H ++#define _ASM_COMPILER_H ++ ++#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) ++#define GCC_REG_ACCUM "$0" ++#else ++#define GCC_REG_ACCUM "accum" ++#endif ++ ++#endif /* _ASM_COMPILER_H */ diff --git a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain new file mode 100644 index 000000000..53e509d3a --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain @@ -0,0 +1,24 @@ +--- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700 ++++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700 +@@ -17,16 +17,16 @@ + # Select the object file format to substitute into the linker script. + # + ifdef CONFIG_CPU_LITTLE_ENDIAN +-tool-prefix = mipsel-linux- ++#tool-prefix = mipsel-linux- + ld-emul = elf32ltsmip + else +-tool-prefix = mips-linux- ++#tool-prefix = mips-linux- + ld-emul = elf32btsmip + endif + +-ifdef CONFIG_CROSSCOMPILE +-CROSS_COMPILE = $(tool-prefix) +-endif ++#ifdef CONFIG_CROSSCOMPILE ++#CROSS_COMPILE = $(tool-prefix) ++#endif + + MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot + diff --git a/target/device/jp/q5/kernel-patches-2.4.26/100-version b/target/device/jp/q5/kernel-patches-2.4.26/100-version new file mode 100644 index 000000000..813d45f15 --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.26/100-version @@ -0,0 +1,11 @@ +--- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 ++++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 +@@ -1,7 +1,7 @@ + VERSION = 2 + PATCHLEVEL = 4 + SUBLEVEL = 26 +-EXTRAVERSION = ++EXTRAVERSION =-q5 + + KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) + diff --git a/target/device/jp/q5/kernel-patches-2.4.29/001-q5 b/target/device/jp/q5/kernel-patches-2.4.29/001-q5 new file mode 100644 index 000000000..5f1af425a --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.29/001-q5 @@ -0,0 +1,420 @@ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100 +@@ -16,7 +16,7 @@ all: au1000.o + + O_TARGET := au1000.o + +-export-objs = prom.o clocks.o power.o usbdev.o ++export-objs = prom.o clocks.o power.o usbdev.o setup.o + + obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \ + clocks.o power.o setup.o sleeper.o +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100 +@@ -81,7 +81,7 @@ void prom_init_cmdline(void) + } + + +-char *prom_getenv(char *envname) ++char *prom_getenv_n(char *envname, int n) + { + /* + * Return a pointer to the given environment variable. +@@ -89,19 +89,24 @@ char *prom_getenv(char *envname) + */ + + t_env_var *env = (t_env_var *)prom_envp; +- int i; ++ int i, j=0; + + i = strlen(envname); + + while(env->name) { + if(strncmp(envname, env->name, i) == 0) { +- return(env->name + strlen(envname) + 1); ++ if(j++ == n) return(env->name + strlen(envname) + 1); + } + env++; + } + return(NULL); + } + ++char *prom_getenv(char *envname) ++{ ++ return prom_getenv_n(envname, 0); ++} ++ + inline unsigned char str2hexnum(unsigned char c) + { + if(c >= '0' && c <= '9') +@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea, + } + } + +-int get_ethernet_addr(char *ethernet_addr) ++int get_ethernet_addr_n(char *ethernet_addr, int n) + { + char *ethaddr_str; + +- ethaddr_str = prom_getenv("ethaddr"); ++ ethaddr_str = prom_getenv_n("ethaddr", n); + if (!ethaddr_str) { + printk("ethaddr not set in boot prom\n"); + return -1; + } + str2eaddr(ethernet_addr, ethaddr_str); + +-#if 0 ++#if 1 + { + int i; + +@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add + return 0; + } + ++int get_ethernet_addr(char *ethernet_addr) ++{ ++ return get_ethernet_addr_n(ethernet_addr, 0); ++} ++ + void prom_free_prom_memory (void) {} ++EXPORT_SYMBOL(get_ethernet_addr_n); + EXPORT_SYMBOL(prom_getcmdline); + EXPORT_SYMBOL(get_ethernet_addr); + EXPORT_SYMBOL(str2eaddr); +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c +--- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100 +@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops; + #endif + + extern struct rtc_ops no_rtc_ops; ++void (*__wbflush) (void); + extern char * __init prom_getcmdline(void); + extern void __init board_setup(void); + extern void au1000_restart(char *); +@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr( + extern void au1xxx_time_init(void); + extern void au1xxx_timer_setup(void); + ++void au1500_wbflush(void) ++{ ++ __asm__ volatile ("sync"); ++} ++ + void __init au1x00_setup(void) + { + char *argptr; +@@ -89,6 +95,8 @@ void __init au1x00_setup(void) + } + #endif + ++ __wbflush = au1500_wbflush; ++ + #ifdef CONFIG_FB_AU1100 + if ((argptr = strstr(argptr, "video=")) == NULL) { + argptr = prom_getcmdline(); +@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr( + return phys_addr; + } + #endif ++ ++EXPORT_SYMBOL(__wbflush); ++ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S +--- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100 +@@ -33,7 +33,9 @@ + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. + */ +- .fill 0x400 ++ j kernel_entry ++ nop ++ .org 0x400 + + /* The following two symbols are used for kernel profiling. */ + EXPORT(stext) +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile +--- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100 ++++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200 +@@ -69,13 +69,13 @@ endif + set_gccflags = $(shell \ + while :; do \ + cpu=$(1); isa=-$(2); \ +- for gcc_opt in -march= -mcpu=; do \ ++ for gcc_opt in -march=; do \ + $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ + -xc /dev/null > /dev/null 2>&1 && \ + break 2; \ + done; \ + cpu=$(3); isa=-$(4); \ +- for gcc_opt in -march= -mcpu=; do \ ++ for gcc_opt in -march=; do \ + $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ + -xc /dev/null > /dev/null 2>&1 && \ + break 2; \ +@@ -90,7 +90,7 @@ else \ + fi; \ + gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ + while :; do \ +- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ ++ for gas_opt in -Wa,-march=; do \ + $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ + -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ + break 2; \ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c +--- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100 +@@ -29,6 +29,7 @@ + #include + #include + #include ++#include + + void kbd_leds(unsigned char leds) + { +@@ -140,3 +141,46 @@ void __init kbd_init_hw(void) + { + printk("Dummy keyboard driver installed.\n"); + } ++ ++ ++void panic_blink(void) ++ { ++ } ++ ++ ++ int pckbd_translate(unsigned char scancode, unsigned char *keycode, ++ char raw_mode) ++ { ++ return 0; ++ } ++ ++ char pckbd_unexpected_up(unsigned char keycode) ++ { ++ return 0; ++ } ++ ++ ++ void pckbd_leds(unsigned char leds) ++ { ++ } ++ ++ ++ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode) ++ { ++ return 0; ++ } ++ ++ int pckbd_getkeycode(unsigned int scancode) ++ { ++ return 0; ++ } ++ ++ void __init pckbd_init_hw(void) ++ { ++ } ++ ++ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) ++ { ++ return 0; ++ } ++ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile +--- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100 +@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4. + list-multi := + + KEYMAP =defkeymap.o +-KEYBD =pc_keyb.o ++KEYBD =dummy_keyb.o + CONSOLE =console.o + SERIAL =serial.o + +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100 +@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i + or tells us why it failed. */ + dq6 = CMD(1<<6); + dq5 = CMD(1<<5); +- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ ++ timeo = jiffies + HZ; /* setting timeout to 1ms for now */ + + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); +@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); + +- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { +- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); +- } else { ++ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) { + /* DQ5 is active so we can do a reset and stop the erase */ + cfi_write(map, CMD(0xF0), chip->start); + printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c +--- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100 +@@ -86,28 +86,24 @@ static int mtd_parts_n + #else + static struct mtd_partition physmap_partitions[] = { + /* Put your own partition definitions here */ +-#if 0 + { +- name: "bootROM", +- size: 0x80000, ++ name: "fs1", ++ size: 28*1024*1024, + offset: 0, +- mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { +- name: "zImage", +- size: 0x100000, ++ name: "bootldr", ++ size: 128*1024, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { +- name: "ramdisk.gz", +- size: 0x300000, ++ name: "kernel", ++ size: 1*1024*1024, + offset: MTDPART_OFS_APPEND, +- mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { +- name: "User FS", ++ name: "fs2", + size: MTDPART_SIZ_FULL, + offset: MTDPART_OFS_APPEND, + } +-#endif + }; + + #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition)) +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c +--- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200 +@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str + goto err_ioremap; + } + +- /* Work around the dropped serial bit. */ ++#ifdef __mips__ ++ if (get_ethernet_addr_n(dev->dev_addr, 2)) { ++ printk(KERN_INFO "%s: No mac address found\n", dev->name); ++ } ++#else + prev_eedata = eeprom_read(ioaddr, 6); + for (i = 0; i < 3; i++) { + int eedata = eeprom_read(ioaddr, i + 7); +@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str + dev->dev_addr[i*2+1] = eedata >> 7; + prev_eedata = eedata; + } ++#endif + + dev->base_addr = ioaddr; + dev->irq = irq; +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h +--- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100 ++++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100 +@@ -302,9 +302,9 @@ typedef struct hermes_response { + #define hermes_read_reg(hw, off) ((hw)->io_space ? \ + inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ + readw((hw)->iobase + ( (off) << (hw)->reg_spacing ))) +-#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \ +- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ +- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ))) ++#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \ ++ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \ ++ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));} + + #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name)) + #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val))) +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h +--- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100 +@@ -13,7 +13,6 @@ + #include + #include + +-#ifdef __KERNEL__ + + /* + * PAGE_SHIFT determines the page size +@@ -30,6 +29,7 @@ + #define PAGE_SIZE (1L << PAGE_SHIFT) + #define PAGE_MASK (~(PAGE_SIZE-1)) + ++#ifdef __KERNEL__ + #ifndef __ASSEMBLY__ + + #include +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h +--- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100 +@@ -15,8 +15,11 @@ + + #ifdef CONFIG_CPU_HAS_WB + +-extern void (*__wbflush)(void); +-extern void wbflush_setup(void); ++//extern void (*__wbflush)(void); ++//extern void wbflush_setup(void); ++ ++ ++#define __wbflush() { __asm__ volatile ("sync"); } + + #define wbflush() \ + do { \ +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h +--- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100 +@@ -37,6 +37,7 @@ + #endif + + #if defined(__arm__) || defined(__mips__) ++//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus + typedef u_int ioaddr_t; + #else + typedef u_short ioaddr_t; +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h +--- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100 ++++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100 +@@ -112,7 +112,7 @@ typedef struct pccard_mem_map { + u_char map; + u_char flags; + u_short speed; +- u_long sys_start, sys_stop; ++ ioaddr_t sys_start, sys_stop; + u_int card_start; + } pccard_mem_map; + +diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c +--- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100 ++++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100 +@@ -760,8 +760,6 @@ static void __init devfs_make_root(char + static void __init mount_root(void) + { + #ifdef CONFIG_ROOT_NFS +- if (MAJOR(ROOT_DEV) == NFS_MAJOR +- && MINOR(ROOT_DEV) == NFS_MINOR) { + if (mount_nfs_root()) { + sys_chdir("/root"); + ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev; +@@ -770,7 +768,6 @@ static void __init mount_root(void) + } + printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); + ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0); +- } + #endif + devfs_make_root(root_device_name); + create_dev("/dev/root", ROOT_DEV, root_device_name); + diff --git a/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain new file mode 100644 index 000000000..53e509d3a --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain @@ -0,0 +1,24 @@ +--- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700 ++++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700 +@@ -17,16 +17,16 @@ + # Select the object file format to substitute into the linker script. + # + ifdef CONFIG_CPU_LITTLE_ENDIAN +-tool-prefix = mipsel-linux- ++#tool-prefix = mipsel-linux- + ld-emul = elf32ltsmip + else +-tool-prefix = mips-linux- ++#tool-prefix = mips-linux- + ld-emul = elf32btsmip + endif + +-ifdef CONFIG_CROSSCOMPILE +-CROSS_COMPILE = $(tool-prefix) +-endif ++#ifdef CONFIG_CROSSCOMPILE ++#CROSS_COMPILE = $(tool-prefix) ++#endif + + MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot + diff --git a/target/device/jp/q5/kernel-patches-2.4.29/100-version b/target/device/jp/q5/kernel-patches-2.4.29/100-version new file mode 100644 index 000000000..7e420d1ff --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.29/100-version @@ -0,0 +1,11 @@ +--- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 ++++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 +@@ -1,7 +1,7 @@ + VERSION = 2 + PATCHLEVEL = 4 + SUBLEVEL = 29 +-EXTRAVERSION = ++EXTRAVERSION =-q5 + + KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) + diff --git a/target/device/jp/q5/linux.config b/target/device/jp/q5/linux.config new file mode 100644 index 000000000..f299cb556 --- /dev/null +++ b/target/device/jp/q5/linux.config @@ -0,0 +1,858 @@ +# +# Automatically generated by make menuconfig: don't edit +# +CONFIG_MIPS=y +CONFIG_MIPS32=y +# CONFIG_MIPS64 is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODVERSIONS is not set +# CONFIG_KMOD is not set + +# +# Machine selection +# +# CONFIG_ACER_PICA_61 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +CONFIG_MIPS_PB1500=y +# CONFIG_MIPS_HYDROGEN3 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_COGENT_CSB250 is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_HP_LASERJET is not set +# CONFIG_IBM_WORKPAD is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MAGNUM_4000 is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_NEC_OSPREY is not set +# CONFIG_NEC_EAGLE is not set +# CONFIG_OLIVETTI_M700 is not set +# CONFIG_NINO is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TANBAC_TB0226 is not set +# CONFIG_TANBAC_TB0229 is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +# CONFIG_HIGHMEM is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_SOC_AU1X00=y +CONFIG_SOC_AU1500=y +CONFIG_NEW_TIME_C=y +CONFIG_PCI=y +CONFIG_NEW_PCI=y +CONFIG_PCI_AUTO=y +CONFIG_NONCOHERENT_IO=y +CONFIG_PC_KEYB=y +# CONFIG_MIPS_AU1000 is not set + +# +# CPU selection +# +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +# CONFIG_VTAG_ICACHE is not set +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_CPU_ADVANCED=y +CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_HAS_LLDSCD is not set +CONFIG_CPU_HAS_WB=y +CONFIG_CPU_HAS_SYNC=y + +# +# General setup +# +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_NET=y +CONFIG_PCI_NAMES=y +# CONFIG_ISA is not set +# CONFIG_TC is not set +# CONFIG_MCA is not set +# CONFIG_SBUS is not set +CONFIG_HOTPLUG=y + +# +# PCMCIA/CardBus support +# +# CONFIG_PCMCIA is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_COMPAQ is not set +# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_KCORE_ELF=y +# CONFIG_KCORE_AOUT is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_MIPS32_COMPAT is not set +# CONFIG_MIPS32_O32 is not set +# CONFIG_MIPS32_N32 is not set +# CONFIG_BINFMT_ELF32 is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_OOM_KILLER is not set +# CONFIG_PM is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CONCAT=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_CFI_B1 is not set +CONFIG_MTD_CFI_B2=y +CONFIG_MTD_CFI_B4=y +# CONFIG_MTD_CFI_B8 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_AMDSTD is not set +# CONFIG_MTD_SHARP is not set +# CONFIG_MTD_JEDEC is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=18000000 +CONFIG_MTD_PHYSMAP_LEN=2000000 +CONFIG_MTD_PHYSMAP_BUSWIDTH=4 +# CONFIG_MTD_PB1000 is not set +# CONFIG_MTD_PB1500 is not set +# CONFIG_MTD_PB1100 is not set +# CONFIG_MTD_CSTM_MIPS_IXX is not set +# CONFIG_MTD_OCELOT is not set +# CONFIG_MTD_LASAT is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PCMCIA is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_DOC1000 is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOCPROBE is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play configuration +# +# CONFIG_PNP is not set +# CONFIG_ISAPNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_CISS_SCSI_TAPE is not set +# CONFIG_CISS_MONITOR_THREAD is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_STATS is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set +# CONFIG_BLK_DEV_MD is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_BLK_DEV_LVM is not set + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_FILTER=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_ROUTE_FWMARK is not set +# CONFIG_IP_ROUTE_NAT is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_TOS is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_FTP=m +# CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_NF_IRC is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_MAC=m +# CONFIG_IP_NF_MATCH_PKTTYPE is not set +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_DSCP is not set +# CONFIG_IP_NF_MATCH_AH_ESP is not set +# CONFIG_IP_NF_MATCH_LENGTH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_MATCH_TCPMSS=m +# CONFIG_IP_NF_MATCH_HELPER is not set +CONFIG_IP_NF_MATCH_STATE=m +# CONFIG_IP_NF_MATCH_CONNTRACK is not set +CONFIG_IP_NF_MATCH_UNCLEAN=m +# CONFIG_IP_NF_MATCH_OWNER is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_MIRROR is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +# CONFIG_IP_NF_NAT_LOCAL is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_TARGET_TCPMSS is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_KHTTPD is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_VLAN_8021Q=y +# CONFIG_IPX is not set +# CONFIG_ATALK is not set + +# +# Appletalk devices +# +# CONFIG_DEV_APPLETALK is not set +# CONFIG_DECNET is not set +CONFIG_BRIDGE=m +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_LLC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +# CONFIG_NET_SCH_CSZ is not set +# CONFIG_NET_SCH_HFSC is not set +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +# CONFIG_NET_SCH_DELAY is not set +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set +# CONFIG_PHONE_IXJ is not set +# CONFIG_PHONE_IXJ_PCMCIA is not set + +# +# ATA/IDE/MFM/RLL support +# +# CONFIG_IDE is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI support +# +# CONFIG_SCSI is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_BOOT is not set +# CONFIG_FUSION_ISENSE is not set +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LAN is not set + +# +# IEEE 1394 (FireWire) support (EXPERIMENTAL) +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_I2O_PCI is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_LAN is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ETHERTAP is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_BCM5222_DUAL_PHY is not set +# CONFIG_SUNLANCE is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNBMAC is not set +# CONFIG_SUNQE is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +# CONFIG_TULIP is not set +# CONFIG_DE4X5 is not set +# CONFIG_DGRS is not set +# CONFIG_DM9102 is not set +# CONFIG_EEPRO100 is not set +# CONFIG_EEPRO100_PIO is not set +# CONFIG_E100 is not set +# CONFIG_LNE390 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_FORCEDETH is not set +# CONFIG_NE3210 is not set +# CONFIG_ES3210 is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_SUNDANCE_MMIO is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_RHINE_MMIO is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_MYRI_SBUS is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +CONFIG_STRIP=m +CONFIG_WAVELAN=m +CONFIG_ARLAN=m +CONFIG_AIRONET4500=m +CONFIG_AIRONET4500_NONCS=m +CONFIG_AIRONET4500_PNP=y +CONFIG_AIRONET4500_PCI=y +# CONFIG_AIRONET4500_ISA is not set +# CONFIG_AIRONET4500_I365 is not set +CONFIG_AIRONET4500_PROC=m +CONFIG_AIRO=m +# CONFIG_HERMES is not set +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_PCI_HERMES is not set +CONFIG_NET_WIRELESS=y + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input core support +# +# CONFIG_INPUT is not set +# CONFIG_INPUT_KEYBDEV is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_UINPUT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_SERIAL is not set +# CONFIG_SERIAL_EXTENDED is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_DIGI is not set +# CONFIG_ESPSERIAL is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_SERIAL_TX3912 is not set +# CONFIG_SERIAL_TX3912_CONSOLE is not set +# CONFIG_SERIAL_TXX9 is not set +# CONFIG_SERIAL_TXX9_CONSOLE is not set +CONFIG_AU1X00_UART=y +CONFIG_AU1X00_SERIAL_CONSOLE=y +# CONFIG_AU1X00_USB_TTY is not set +# CONFIG_AU1X00_USB_RAW is not set +# CONFIG_TXX927_SERIAL is not set +CONFIG_UNIX98_PTYS=y +CONFIG_UNIX98_PTY_COUNT=256 + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_MOUSE is not set + +# +# Joysticks +# +# CONFIG_INPUT_GAMEPORT is not set +# CONFIG_QIC02_TAPE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_IPMI_PANIC_EVENT is not set +# CONFIG_IPMI_DEVICE_INTERFACE is not set +# CONFIG_IPMI_KCS is not set +# CONFIG_IPMI_WATCHDOG is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_SCx200 is not set +# CONFIG_SCx200_GPIO is not set +# CONFIG_AMD_PM768 is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_MIPS_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set + +# +# Direct Rendering Manager (XFree86 DRI support) +# +# CONFIG_DRM is not set +# CONFIG_AU1X00_GPIO is not set +# CONFIG_TS_AU1X00_ADS7846 is not set + +# +# File systems +# +# CONFIG_QUOTA is not set +# CONFIG_QFMT_V2 is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADFS_FS_RW is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BEFS_DEBUG is not set +# CONFIG_BFS_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_JBD_DEBUG is not set +# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_UMSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_CRAMFS is not set +CONFIG_TMPFS=y +CONFIG_RAMFS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_HPFS_FS is not set +CONFIG_PROC_FS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVPTS_FS=y +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX4FS_RW is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_EXT2_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDF_RW is not set +# CONFIG_UFS_FS is not set +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_XFS_FS is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_TRACE is not set +# CONFIG_XFS_DEBUG is not set + +# +# Network File Systems +# +# CONFIG_CODA_FS is not set +# CONFIG_INTERMEZZO_FS is not set +# CONFIG_NFS_FS is not set +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_ROOT_NFS is not set +# CONFIG_NFSD is not set +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +# CONFIG_SUNRPC is not set +# CONFIG_LOCKD is not set +# CONFIG_SMB_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_ZISOFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_SMB_NLS is not set +# CONFIG_NLS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Console drivers +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set + +# +# Frame-buffer support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set + +# +# Support for USB gadgets +# +# CONFIG_USB_GADGET is not set + +# +# Bluetooth support +# +# CONFIG_BLUEZ is not set + +# +# Kernel hacking +# +CONFIG_CROSSCOMPILE=y +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_KGDB is not set +# CONFIG_GDB_CONSOLE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MIPS_UNCACHED is not set +CONFIG_LOG_BUF_SHIFT=0 + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC32 is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_FW_LOADER=y diff --git a/target/device/jp/q5/linux.mk b/target/device/jp/q5/linux.mk new file mode 100644 index 000000000..32b8c3d07 --- /dev/null +++ b/target/device/jp/q5/linux.mk @@ -0,0 +1,132 @@ +############################################################# +# +# Linux kernel targets +# +# Note: If you have any patches to apply, create the directory +# sources/kernel-patches and put your patches in there and number +# them in the order you wish to apply them... i.e. +# +# sources/kernel-patches/001-my-special-stuff.bz2 +# sources/kernel-patches/003-gcc-Os.bz2 +# sources/kernel-patches/004_no-warnings.bz2 +# sources/kernel-patches/030-lowlatency-mini.bz2 +# sources/kernel-patches/031-lowlatency-fixes-5.bz2 +# sources/kernel-patches/099-shutup.bz2 +# etc... +# +# these patches will all be applied by the patch-kernel.sh +# script (which will also abort the build if it finds rejects) +# -Erik +# +############################################################# +ifneq ($(filter $(TARGETS),linux),) + +# Base version of Linux kernel that we need to download +DOWNLOAD_LINUX_VERSION=2.4.26 +# Version of Linux kernel AFTER applying all patches +LINUX_VERSION=$(DOWNLOAD_LINUX_VERSION)-q5 + + +# File name for the Linux kernel binary +LINUX_KERNEL=linux-kernel-$(LINUX_VERSION)-$(ARCH).srec + + +# Linux kernel configuration file +LINUX_KCONFIG=$(JP_Q5_PATH)/linux.config + +# kernel patches +LINUX_PATCH_DIR=target/device/jp/q5/kernel-patches-$(DOWNLOAD_LINUX_VERSION)/ + + + + +LINUX_FORMAT=vmlinux +LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \ + -e 's/mipsel/mips/' \ + -e 's/powerpc/ppc/' \ + -e 's/sh[234]/sh/' \ + ) +LINUX_BINLOC=$(LINUX_FORMAT) +LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION) +LINUX_SOURCE=linux-$(DOWNLOAD_LINUX_VERSION).tar.bz2 +LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4 +# Used by pcmcia-cs and others +LINUX_SOURCE_DIR=$(LINUX_DIR) + + +$(DL_DIR)/$(LINUX_SOURCE): + -mkdir -p $(DL_DIR) + $(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE) + +$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) + -mkdir -p $(TOOL_BUILD_DIR) + -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX_DIR) linux) + bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - +ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION)) + # Rename the dir from the downloaded version to the AFTER patch version + mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION) +endif + toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR) + touch $(LINUX_DIR)/.unpacked + +$(LINUX_KCONFIG): + @if [ ! -f "$(LINUX_KCONFIG)" ] ; then \ + echo ""; \ + echo "You should create a .config for your kernel"; \ + echo "and install it as $(LINUX_KCONFIG)"; \ + echo ""; \ + sleep 5; \ + fi; + +$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG) + $(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile + $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile + -cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config +ifeq ($(strip $(BR2_mips)),y) + $(SED) "s,CONFIG_CPU_LITTLE_ENDIAN=y,# CONFIG_CPU_LITTLE_ENDIAN is not set\n# CONFIG_BINFMT_IRIX is not set," $(LINUX_DIR)/.config +endif + $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h + touch $(LINUX_DIR)/.configured + +$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured + $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep + touch $(LINUX_DIR)/.depend_done + +$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done + $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) $(LINUX_FORMAT) + $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) modules + +$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC) + $(KERNEL_CROSS)objcopy -O srec $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL) + touch -c $(LINUX_KERNEL) + +$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep: $(LINUX_KERNEL) + rm -rf $(TARGET_DIR)/lib/modules + rm -f $(TARGET_DIR)/sbin/cardmgr + $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) DEPMOD=`which true` \ + INSTALL_MOD_PATH=$(TARGET_DIR) modules_install + (cd $(TARGET_DIR)/lib/modules; ln -s $(LINUX_VERSION)/kernel/drivers .) + $(JP_Q5_PATH)/depmod.pl \ + -b $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/ \ + -k $(LINUX_DIR)/vmlinux \ + -F $(LINUX_DIR)/System.map \ + > $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep + +$(STAGING_DIR)/include/linux/version.h: $(LINUX_DIR)/.configured + mkdir -p $(STAGING_DIR)/include + tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/ + tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/ + +linux: $(STAGING_DIR)/include/linux/version.h $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep + +linux-source: $(DL_DIR)/$(LINUX_SOURCE) + +# This has been renamed so we do _NOT_ by default run this on 'make clean' +linuxclean: clean + rm -f $(LINUX_KERNEL) + -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) clean + +linux-dirclean: + rm -rf $(LINUX_DIR) + +endif diff --git a/target/device/jp/q5/skel.tar.gz b/target/device/jp/q5/skel.tar.gz new file mode 100644 index 000000000..301c5cfa2 Binary files /dev/null and b/target/device/jp/q5/skel.tar.gz differ diff --git a/target/device/jp/q5/target_skeleton/etc/TZ b/target/device/jp/q5/target_skeleton/etc/TZ new file mode 100644 index 000000000..9fcb2a3c5 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/TZ @@ -0,0 +1 @@ +MST7MDT diff --git a/target/device/jp/q5/target_skeleton/etc/fstab b/target/device/jp/q5/target_skeleton/etc/fstab new file mode 100644 index 000000000..6d33629a7 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/fstab @@ -0,0 +1,8 @@ +# /etc/fstab: static file system information. +# +# +/dev/root / ext2 rw,noauto 0 1 +proc /proc proc defaults 0 0 +devpts /dev/pts devpts defaults,gid=5,mode=620 0 0 +tmpfs /tmp tmpfs defaults 0 0 + diff --git a/target/device/jp/q5/target_skeleton/etc/group b/target/device/jp/q5/target_skeleton/etc/group new file mode 100644 index 000000000..a21ef0f76 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/group @@ -0,0 +1,10 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +utmp:x:43: +staff:x:50: +default:x:1000: diff --git a/target/device/jp/q5/target_skeleton/etc/hostname b/target/device/jp/q5/target_skeleton/etc/hostname new file mode 100644 index 000000000..52e67d68a --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/hostname @@ -0,0 +1 @@ +uclibc diff --git a/target/device/jp/q5/target_skeleton/etc/hosts b/target/device/jp/q5/target_skeleton/etc/hosts new file mode 100644 index 000000000..ba712fe03 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/hosts @@ -0,0 +1 @@ +127.0.0.1 localhost diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom b/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom new file mode 100755 index 000000000..433fafee4 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom @@ -0,0 +1,44 @@ +#! /bin/sh +# +# urandom This script saves the random seed between reboots. +# It is called from the boot, halt and reboot scripts. +# +# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl +# + +[ -c /dev/urandom ] || exit 0 +#. /etc/default/rcS + +case "$1" in + start|"") + if [ "$VERBOSE" != no ] + then + echo -n "Initializing random number generator... " + fi + # Load and then save 512 bytes, + # which is the size of the entropy pool + if [ -f /etc/random-seed ] + then + cat /etc/random-seed >/dev/urandom + fi + rm -f /etc/random-seed + umask 077 + dd if=/dev/urandom of=/etc/random-seed count=1 \ + >/dev/null 2>&1 || echo "urandom start: failed." + umask 022 + [ "$VERBOSE" != no ] && echo "done." + ;; + stop) + # Carry a random seed from shut-down to start-up; + # see documentation in linux/drivers/char/random.c + [ "$VERBOSE" != no ] && echo -n "Saving random seed... " + umask 077 + dd if=/dev/urandom of=/etc/random-seed count=1 \ + >/dev/null 2>&1 || echo "urandom stop: failed." + [ "$VERBOSE" != no ] && echo "done." + ;; + *) + echo "Usage: urandom {start|stop}" >&2 + exit 1 + ;; +esac diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/S40network b/target/device/jp/q5/target_skeleton/etc/init.d/S40network new file mode 100755 index 000000000..d835d9c72 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/init.d/S40network @@ -0,0 +1,35 @@ +#!/bin/sh +# +# Start the network.... +# + +start() { + echo "Starting network..." + /sbin/ifup -a +} +stop() { + echo -n "Stopping network..." + /sbin/ifdown -a +} +restart() { + stop + start +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart|reload) + restart + ;; + *) + echo $"Usage: $0 {start|stop|restart}" + exit 1 +esac + +exit $? + diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/rcS b/target/device/jp/q5/target_skeleton/etc/init.d/rcS new file mode 100755 index 000000000..de411534d --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/init.d/rcS @@ -0,0 +1,27 @@ +#!/bin/sh + + +# Start all init scripts in /etc/init.d +# executing them in numerical order. +# +for i in /etc/init.d/S??* ;do + + # Ignore dangling symlinks (if any). + [ ! -f "$i" ] && continue + + case "$i" in + *.sh) + # Source shell script for speed. + ( + trap - INT QUIT TSTP + set start + . $i + ) + ;; + *) + # No sh extension, so fork subprocess. + $i start + ;; + esac +done + diff --git a/target/device/jp/q5/target_skeleton/etc/inittab b/target/device/jp/q5/target_skeleton/etc/inittab new file mode 100644 index 000000000..8c809af68 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/inittab @@ -0,0 +1,47 @@ +# /etc/inittab +# +# Copyright (C) 2001 Erik Andersen +# +# Note: BusyBox init doesn't support runlevels. The runlevels field is +# completely ignored by BusyBox init. If you want runlevels, use +# sysvinit. +# +# Format for each entry: ::: +# +# id == tty to run on, or empty for /dev/console +# runlevels == ignored +# action == one of sysinit, respawn, askfirst, wait, and once +# process == program to run + +# Startup the system +null::sysinit:/bin/mount -o remount,rw / +null::sysinit:/bin/mount -t proc proc /proc +null::sysinit:/bin/mount -a +null::sysinit:/bin/hostname -F /etc/hostname +null::sysinit:/sbin/ifconfig lo 127.0.0.1 up +null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo +# now run any rc scripts +::sysinit:/etc/init.d/rcS + +# Set up a couple of getty's +#tty1::respawn:/sbin/getty 38400 tty1 +#tty2::respawn:/sbin/getty 38400 tty2 + +# Put a getty on the serial port +ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 + +# Logging junk +null::sysinit:/bin/touch /var/log/messages +null::respawn:/sbin/syslogd -n -m 0 +null::respawn:/sbin/klogd -n +#tty3::respawn:/usr/bin/tail -f /var/log/messages + +# Stuff to do for the 3-finger salute +::ctrlaltdel:/sbin/reboot + +# Stuff to do before rebooting +null::shutdown:/usr/bin/killall klogd +null::shutdown:/usr/bin/killall syslogd +null::shutdown:/bin/umount -a -r +null::shutdown:/sbin/swapoff -a + diff --git a/target/device/jp/q5/target_skeleton/etc/inputrc b/target/device/jp/q5/target_skeleton/etc/inputrc new file mode 100644 index 000000000..2f1cb601a --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/inputrc @@ -0,0 +1,44 @@ +# /etc/inputrc - global inputrc for libreadline +# See readline(3readline) and `info readline' for more information. + +# Be 8 bit clean. +set input-meta on +set output-meta on +set bell-style visible + +# To allow the use of 8bit-characters like the german umlauts, comment out +# the line below. However this makes the meta key not work as a meta key, +# which is annoying to those which don't need to type in 8-bit characters. + +# set convert-meta off + +"\e0d": backward-word +"\e0c": forward-word +"\e[h": beginning-of-line +"\e[f": end-of-line +"\e[1~": beginning-of-line +"\e[4~": end-of-line +#"\e[5~": beginning-of-history +#"\e[6~": end-of-history +"\e[3~": delete-char +"\e[2~": quoted-insert + +# Common standard keypad and cursor +# (codes courtsey Werner Fink, ) +#"\e[1~": history-search-backward +"\e[2~": yank +"\e[3~": delete-char +#"\e[4~": set-mark +"\e[5~": history-search-backward +"\e[6~": history-search-forward +# Normal keypad and cursor of xterm +"\e[F": end-of-line +"\e[H": beginning-of-line +# Application keypad and cursor of xterm +"\eOA": previous-history +"\eOC": forward-char +"\eOB": next-history +"\eOD": backward-char +"\eOF": end-of-line +"\eOH": beginning-of-line + diff --git a/target/device/jp/q5/target_skeleton/etc/issue b/target/device/jp/q5/target_skeleton/etc/issue new file mode 100644 index 000000000..f24b862c9 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/issue @@ -0,0 +1,4 @@ + + +Welcome to the Erik's uClibc development environment. + diff --git a/target/device/jp/q5/target_skeleton/etc/network/interfaces b/target/device/jp/q5/target_skeleton/etc/network/interfaces new file mode 100644 index 000000000..218b82cde --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/network/interfaces @@ -0,0 +1,4 @@ +# Configure Loopback +auto lo +iface lo inet loopback + diff --git a/target/device/jp/q5/target_skeleton/etc/passwd b/target/device/jp/q5/target_skeleton/etc/passwd new file mode 100644 index 000000000..e0f473fc7 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/passwd @@ -0,0 +1,13 @@ +root:x:0:0:root:/root:/bin/sh +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:100:sync:/bin:/bin/sync +mail:x:8:8:mail:/var/spool/mail:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +operator:x:37:37:Operator:/var:/bin/sh +sshd:x:103:99:Operator:/var:/bin/sh +nobody:x:99:99:nobody:/home:/bin/sh +default:x:1000:1000:Default non-root user:/home/default:/bin/sh diff --git a/target/device/jp/q5/target_skeleton/etc/profile b/target/device/jp/q5/target_skeleton/etc/profile new file mode 100644 index 000000000..6aa4259fd --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/profile @@ -0,0 +1,48 @@ +# ~/.bashrc: executed by bash(1) for non-login interactive shells. + +export PATH=\ +/bin:\ +/sbin:\ +/usr/bin:\ +/usr/sbin:\ +/usr/bin/X11:\ +/usr/local/bin + +# If running interactively, then: +if [ "$PS1" ]; then + + if [ "$BASH" ]; then + export PS1="[\u@\h \W]\\$ " + alias ll='/bin/ls -laFh' + alias ls='/bin/ls -F' + export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:'; + else + if [ "`id -u`" -eq 0 ]; then + export PS1='# ' + else + export PS1='$ ' + fi + fi + + export USER=`id -un` + export LOGNAME=$USER + export HOSTNAME=`/bin/hostname` + export HISTSIZE=1000 + export HISTFILESIZE=1000 + export PAGER='/bin/more ' + export EDITOR='/bin/vi' + export INPUTRC=/etc/inputrc + export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile + + ### Some aliases + alias ps2='ps facux ' + alias ps1='ps faxo "%U %t %p %a" ' + alias af='ps af' + alias cls='clear' + alias df='df -h' + alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 ' + #alias bc='bc -l' + alias minicom='minicom -c on' + alias calc='calc -Cd ' + alias bc='calc -Cd ' +fi; diff --git a/target/device/jp/q5/target_skeleton/etc/protocols b/target/device/jp/q5/target_skeleton/etc/protocols new file mode 100644 index 000000000..1ac8a4096 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/protocols @@ -0,0 +1,31 @@ +# /etc/protocols: +# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $ +# +# Internet (IP) protocols +# +# from: @(#)protocols 5.1 (Berkeley) 4/17/89 +# +# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992). + +ip 0 IP # internet protocol, pseudo protocol number +icmp 1 ICMP # internet control message protocol +igmp 2 IGMP # Internet Group Management +ggp 3 GGP # gateway-gateway protocol +ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'') +st 5 ST # ST datagram mode +tcp 6 TCP # transmission control protocol +egp 8 EGP # exterior gateway protocol +pup 12 PUP # PARC universal packet protocol +udp 17 UDP # user datagram protocol +hmp 20 HMP # host monitoring protocol +xns-idp 22 XNS-IDP # Xerox NS IDP +rdp 27 RDP # "reliable datagram" protocol +iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4 +xtp 36 XTP # Xpress Tranfer Protocol +ddp 37 DDP # Datagram Delivery Protocol +idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport +rspf 73 RSPF #Radio Shortest Path First. +vmtp 81 VMTP # Versatile Message Transport +ospf 89 OSPFIGP # Open Shortest Path First IGP +ipip 94 IPIP # Yet Another IP encapsulation +encap 98 ENCAP # Yet Another IP encapsulation diff --git a/target/device/jp/q5/target_skeleton/etc/resolv.conf b/target/device/jp/q5/target_skeleton/etc/resolv.conf new file mode 100644 index 000000000..71a86dd76 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/resolv.conf @@ -0,0 +1,2 @@ +domain dev.null +nameserver 127.0.0.1 diff --git a/target/device/jp/q5/target_skeleton/etc/securetty b/target/device/jp/q5/target_skeleton/etc/securetty new file mode 100644 index 000000000..81616f38e --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/securetty @@ -0,0 +1,12 @@ +tty1 +tty2 +tty3 +tty4 +tty5 +tty6 +tty7 +tty8 +ttyS0 +ttyS1 +ttyS2 +ttyS3 diff --git a/target/device/jp/q5/target_skeleton/etc/services b/target/device/jp/q5/target_skeleton/etc/services new file mode 100644 index 000000000..b287b63ea --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/services @@ -0,0 +1,302 @@ +# /etc/services: +# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $ +# +# Network services, Internet style +# +# Note that it is presently the policy of IANA to assign a single well-known +# port number for both TCP and UDP; hence, most entries here have two entries +# even if the protocol doesn't support UDP operations. +# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports +# are included, only the more common ones. + +tcpmux 1/tcp # TCP port service multiplexer +echo 7/tcp +echo 7/udp +discard 9/tcp sink null +discard 9/udp sink null +systat 11/tcp users +daytime 13/tcp +daytime 13/udp +netstat 15/tcp +qotd 17/tcp quote +msp 18/tcp # message send protocol +msp 18/udp # message send protocol +chargen 19/tcp ttytst source +chargen 19/udp ttytst source +ftp-data 20/tcp +ftp 21/tcp +fsp 21/udp fspd +ssh 22/tcp # SSH Remote Login Protocol +ssh 22/udp # SSH Remote Login Protocol +telnet 23/tcp +# 24 - private +smtp 25/tcp mail +# 26 - unassigned +time 37/tcp timserver +time 37/udp timserver +rlp 39/udp resource # resource location +nameserver 42/tcp name # IEN 116 +whois 43/tcp nicname +re-mail-ck 50/tcp # Remote Mail Checking Protocol +re-mail-ck 50/udp # Remote Mail Checking Protocol +domain 53/tcp nameserver # name-domain server +domain 53/udp nameserver +mtp 57/tcp # deprecated +bootps 67/tcp # BOOTP server +bootps 67/udp +bootpc 68/tcp # BOOTP client +bootpc 68/udp +tftp 69/udp +gopher 70/tcp # Internet Gopher +gopher 70/udp +rje 77/tcp netrjs +finger 79/tcp +www 80/tcp http # WorldWideWeb HTTP +www 80/udp # HyperText Transfer Protocol +link 87/tcp ttylink +kerberos 88/tcp kerberos5 krb5 # Kerberos v5 +kerberos 88/udp kerberos5 krb5 # Kerberos v5 +supdup 95/tcp +# 100 - reserved +hostnames 101/tcp hostname # usually from sri-nic +iso-tsap 102/tcp tsap # part of ISODE. +csnet-ns 105/tcp cso-ns # also used by CSO name server +csnet-ns 105/udp cso-ns +# unfortunately the poppassd (Eudora) uses a port which has already +# been assigned to a different service. We list the poppassd as an +# alias here. This should work for programs asking for this service. +# (due to a bug in inetd the 3com-tsmux line is disabled) +#3com-tsmux 106/tcp poppassd +#3com-tsmux 106/udp poppassd +rtelnet 107/tcp # Remote Telnet +rtelnet 107/udp +pop-2 109/tcp postoffice # POP version 2 +pop-2 109/udp +pop-3 110/tcp # POP version 3 +pop-3 110/udp +sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP +sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP +auth 113/tcp authentication tap ident +sftp 115/tcp +uucp-path 117/tcp +nntp 119/tcp readnews untp # USENET News Transfer Protocol +ntp 123/tcp +ntp 123/udp # Network Time Protocol +netbios-ns 137/tcp # NETBIOS Name Service +netbios-ns 137/udp +netbios-dgm 138/tcp # NETBIOS Datagram Service +netbios-dgm 138/udp +netbios-ssn 139/tcp # NETBIOS session service +netbios-ssn 139/udp +imap2 143/tcp # Interim Mail Access Proto v2 +imap2 143/udp +snmp 161/udp # Simple Net Mgmt Proto +snmp-trap 162/udp snmptrap # Traps for SNMP +cmip-man 163/tcp # ISO mgmt over IP (CMOT) +cmip-man 163/udp +cmip-agent 164/tcp +cmip-agent 164/udp +xdmcp 177/tcp # X Display Mgr. Control Proto +xdmcp 177/udp +nextstep 178/tcp NeXTStep NextStep # NeXTStep window +nextstep 178/udp NeXTStep NextStep # server +bgp 179/tcp # Border Gateway Proto. +bgp 179/udp +prospero 191/tcp # Cliff Neuman's Prospero +prospero 191/udp +irc 194/tcp # Internet Relay Chat +irc 194/udp +smux 199/tcp # SNMP Unix Multiplexer +smux 199/udp +at-rtmp 201/tcp # AppleTalk routing +at-rtmp 201/udp +at-nbp 202/tcp # AppleTalk name binding +at-nbp 202/udp +at-echo 204/tcp # AppleTalk echo +at-echo 204/udp +at-zis 206/tcp # AppleTalk zone information +at-zis 206/udp +qmtp 209/tcp # The Quick Mail Transfer Protocol +qmtp 209/udp # The Quick Mail Transfer Protocol +z3950 210/tcp wais # NISO Z39.50 database +z3950 210/udp wais +ipx 213/tcp # IPX +ipx 213/udp +imap3 220/tcp # Interactive Mail Access +imap3 220/udp # Protocol v3 +ulistserv 372/tcp # UNIX Listserv +ulistserv 372/udp +https 443/tcp # MCom +https 443/udp # MCom +snpp 444/tcp # Simple Network Paging Protocol +snpp 444/udp # Simple Network Paging Protocol +saft 487/tcp # Simple Asynchronous File Transfer +saft 487/udp # Simple Asynchronous File Transfer +npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS +npmp-local 610/udp dqs313_qmaster # npmp-local / DQS +npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS +npmp-gui 611/udp dqs313_execd # npmp-gui / DQS +hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS +hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS +# +# UNIX specific services +# +exec 512/tcp +biff 512/udp comsat +login 513/tcp +who 513/udp whod +shell 514/tcp cmd # no passwords used +syslog 514/udp +printer 515/tcp spooler # line printer spooler +talk 517/udp +ntalk 518/udp +route 520/udp router routed # RIP +timed 525/udp timeserver +tempo 526/tcp newdate +courier 530/tcp rpc +conference 531/tcp chat +netnews 532/tcp readnews +netwall 533/udp # -for emergency broadcasts +uucp 540/tcp uucpd # uucp daemon +afpovertcp 548/tcp # AFP over TCP +afpovertcp 548/udp # AFP over TCP +remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem +klogin 543/tcp # Kerberized `rlogin' (v5) +kshell 544/tcp krcmd # Kerberized `rsh' (v5) +kerberos-adm 749/tcp # Kerberos `kadmin' (v5) +# +webster 765/tcp # Network dictionary +webster 765/udp +# +# From ``Assigned Numbers'': +# +#> The Registered Ports are not controlled by the IANA and on most systems +#> can be used by ordinary user processes or programs executed by ordinary +#> users. +# +#> Ports are used in the TCP [45,106] to name the ends of logical +#> connections which carry long term conversations. For the purpose of +#> providing services to unknown callers, a service contact port is +#> defined. This list specifies the port used by the server process as its +#> contact port. While the IANA can not control uses of these ports it +#> does register or list uses of these ports as a convienence to the +#> community. +# +nfsdstatus 1110/tcp +nfsd-keepalive 1110/udp + +ingreslock 1524/tcp +ingreslock 1524/udp +prospero-np 1525/tcp # Prospero non-privileged +prospero-np 1525/udp +datametrics 1645/tcp old-radius # datametrics / old radius entry +datametrics 1645/udp old-radius # datametrics / old radius entry +sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry +sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry +radius 1812/tcp # Radius +radius 1812/udp # Radius +radacct 1813/tcp # Radius Accounting +radacct 1813/udp # Radius Accounting +nfsd 2049/tcp nfs +nfsd 2049/udp nfs +cvspserver 2401/tcp # CVS client/server operations +cvspserver 2401/udp # CVS client/server operations +mysql 3306/tcp # MySQL +mysql 3306/udp # MySQL +rfe 5002/tcp # Radio Free Ethernet +rfe 5002/udp # Actually uses UDP only +cfengine 5308/tcp # CFengine +cfengine 5308/udp # CFengine +bbs 7000/tcp # BBS service +# +# +# Kerberos (Project Athena/MIT) services +# Note that these are for Kerberos v4, and are unofficial. Sites running +# v4 should uncomment these and comment out the v5 entries above. +# +kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp +kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp +kerberos_master 751/udp # Kerberos authentication +kerberos_master 751/tcp # Kerberos authentication +passwd_server 752/udp # Kerberos passwd server +krb_prop 754/tcp # Kerberos slave propagation +krbupdate 760/tcp kreg # Kerberos registration +kpasswd 761/tcp kpwd # Kerberos "passwd" +kpop 1109/tcp # Pop with Kerberos +knetd 2053/tcp # Kerberos de-multiplexor +zephyr-srv 2102/udp # Zephyr server +zephyr-clt 2103/udp # Zephyr serv-hm connection +zephyr-hm 2104/udp # Zephyr hostmanager +eklogin 2105/tcp # Kerberos encrypted rlogin +# +# Unofficial but necessary (for NetBSD) services +# +supfilesrv 871/tcp # SUP server +supfiledbg 1127/tcp # SUP debugging +# +# Datagram Delivery Protocol services +# +rtmp 1/ddp # Routing Table Maintenance Protocol +nbp 2/ddp # Name Binding Protocol +echo 4/ddp # AppleTalk Echo Protocol +zip 6/ddp # Zone Information Protocol +# +# Services added for the Debian GNU/Linux distribution +poppassd 106/tcp # Eudora +poppassd 106/udp # Eudora +mailq 174/tcp # Mailer transport queue for Zmailer +mailq 174/tcp # Mailer transport queue for Zmailer +omirr 808/tcp omirrd # online mirror +omirr 808/udp omirrd # online mirror +rmtcfg 1236/tcp # Gracilis Packeten remote config server +xtel 1313/tcp # french minitel +coda_opcons 1355/udp # Coda opcons (Coda fs) +coda_venus 1363/udp # Coda venus (Coda fs) +coda_auth 1357/udp # Coda auth (Coda fs) +coda_udpsrv 1359/udp # Coda udpsrv (Coda fs) +coda_filesrv 1361/udp # Coda filesrv (Coda fs) +codacon 1423/tcp venus.cmu # Coda Console (Coda fs) +coda_aux1 1431/tcp # coda auxiliary service (Coda fs) +coda_aux1 1431/udp # coda auxiliary service (Coda fs) +coda_aux2 1433/tcp # coda auxiliary service (Coda fs) +coda_aux2 1433/udp # coda auxiliary service (Coda fs) +coda_aux3 1435/tcp # coda auxiliary service (Coda fs) +coda_aux3 1435/udp # coda auxiliary service (Coda fs) +cfinger 2003/tcp # GNU Finger +afbackup 2988/tcp # Afbackup system +afbackup 2988/udp # Afbackup system +icp 3130/tcp # Internet Cache Protocol (Squid) +icp 3130/udp # Internet Cache Protocol (Squid) +postgres 5432/tcp # POSTGRES +postgres 5432/udp # POSTGRES +fax 4557/tcp # FAX transmission service (old) +hylafax 4559/tcp # HylaFAX client-server protocol (new) +noclog 5354/tcp # noclogd with TCP (nocol) +noclog 5354/udp # noclogd with UDP (nocol) +hostmon 5355/tcp # hostmon uses TCP (nocol) +hostmon 5355/udp # hostmon uses TCP (nocol) +ircd 6667/tcp # Internet Relay Chat +ircd 6667/udp # Internet Relay Chat +webcache 8080/tcp # WWW caching service +webcache 8080/udp # WWW caching service +tproxy 8081/tcp # Transparent Proxy +tproxy 8081/udp # Transparent Proxy +mandelspawn 9359/udp mandelbrot # network mandelbrot +amanda 10080/udp # amanda backup services +amandaidx 10082/tcp # amanda backup services +amidxtape 10083/tcp # amanda backup services +isdnlog 20011/tcp # isdn logging system +isdnlog 20011/udp # isdn logging system +vboxd 20012/tcp # voice box system +vboxd 20012/udp # voice box system +binkp 24554/tcp # Binkley +binkp 24554/udp # Binkley +asp 27374/tcp # Address Search Protocol +asp 27374/udp # Address Search Protocol +tfido 60177/tcp # Ifmail +tfido 60177/udp # Ifmail +fido 60179/tcp # Ifmail +fido 60179/udp # Ifmail + +# Local services + diff --git a/target/device/jp/q5/target_skeleton/etc/shadow b/target/device/jp/q5/target_skeleton/etc/shadow new file mode 100644 index 000000000..4941a1ac5 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/etc/shadow @@ -0,0 +1,12 @@ +root::10933:0:99999:7::: +bin:*:10933:0:99999:7::: +daemon:*:10933:0:99999:7::: +adm:*:10933:0:99999:7::: +lp:*:10933:0:99999:7::: +sync:*:10933:0:99999:7::: +shutdown:*:10933:0:99999:7::: +halt:*:10933:0:99999:7::: +uucp:*:10933:0:99999:7::: +operator:*:10933:0:99999:7::: +nobody:*:10933:0:99999:7::: +default::10933:0:99999:7::: diff --git a/target/device/jp/q5/target_skeleton/root/.bash_history b/target/device/jp/q5/target_skeleton/root/.bash_history new file mode 100644 index 000000000..e69de29bb diff --git a/target/device/jp/q5/target_skeleton/root/.bash_logout b/target/device/jp/q5/target_skeleton/root/.bash_logout new file mode 100644 index 000000000..77ef1f950 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/root/.bash_logout @@ -0,0 +1,7 @@ +# ~/.bash_logout: executed by bash(1) when login shell exits. + +# when leaving the console clear the screen to increase privacy + +case "`tty`" in + /dev/tty[0-9]*) clear +esac diff --git a/target/device/jp/q5/target_skeleton/root/.bash_profile b/target/device/jp/q5/target_skeleton/root/.bash_profile new file mode 100644 index 000000000..27bf14953 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/root/.bash_profile @@ -0,0 +1,15 @@ +# .bash_profile + +export PATH=\ +/bin:\ +/sbin:\ +/usr/bin:\ +/usr/sbin:\ +/usr/bin/X11:\ +/usr/local/bin + +umask 022 + +if [ -f ~/.bashrc ]; then + source ~/.bashrc +fi diff --git a/target/device/jp/q5/target_skeleton/root/.bashrc b/target/device/jp/q5/target_skeleton/root/.bashrc new file mode 100644 index 000000000..c97c9c4dc --- /dev/null +++ b/target/device/jp/q5/target_skeleton/root/.bashrc @@ -0,0 +1,48 @@ +# ~/.bashrc: executed by bash(1) for non-login interactive shells. + +export PATH=\ +/bin:\ +/sbin:\ +/usr/bin:\ +/usr/sbin:\ +/usr/bin/X11:\ +/usr/local/bin + +# If running interactively, then: +if [ "$PS1" ]; then + + if [ "$BASH" ]; then + export PS1="[\u@\h \W]\\$ " + else + if [ "`id -u`" -eq 0 ]; then + export PS1='# ' + else + export PS1='$ ' + fi + fi + + export USER=`id -un` + export LOGNAME=$USER + export HOSTNAME=`/bin/hostname` + export HISTSIZE=1000 + export HISTFILESIZE=1000 + export PAGER='/bin/more ' + export EDITOR='/bin/vi' + export INPUTRC=/etc/inputrc + export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile + export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:'; + + ### Some aliases + alias ps2='ps facux ' + alias ps1='ps faxo "%U %t %p %a" ' + alias af='ps af' + alias cls='clear' + alias ll='/bin/ls -laFh' + alias ls='/bin/ls -F' + alias df='df -h' + alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 ' + #alias bc='bc -l' + alias minicom='minicom -c on' + alias calc='calc -Cd ' + alias bc='calc -Cd ' +fi; diff --git a/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script b/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script new file mode 100755 index 000000000..a52a7f812 --- /dev/null +++ b/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script @@ -0,0 +1,39 @@ +#!/bin/sh + +# udhcpc script edited by Tim Riker + +[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1 + +RESOLV_CONF="/etc/resolv.conf" +[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast" +[ -n "$subnet" ] && NETMASK="netmask $subnet" + +case "$1" in + deconfig) + /sbin/ifconfig $interface 0.0.0.0 + ;; + + renew|bound) + /sbin/ifconfig $interface $ip $BROADCAST $NETMASK + + if [ -n "$router" ] ; then + echo "deleting routers" + while route del default gw 0.0.0.0 dev $interface ; do + : + done + + for i in $router ; do + route add default gw $i dev $interface + done + fi + + echo -n > $RESOLV_CONF + [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF + for i in $dns ; do + echo adding dns $i + echo nameserver $i >> $RESOLV_CONF + done + ;; +esac + +exit 0 diff --git a/target/device/jp/q5/uClibc.config.mipsel b/target/device/jp/q5/uClibc.config.mipsel new file mode 100644 index 000000000..fe1c4ac68 --- /dev/null +++ b/target/device/jp/q5/uClibc.config.mipsel @@ -0,0 +1,160 @@ +# +# Automatically generated make config: don't edit +# +# TARGET_alpha is not set +# TARGET_arm is not set +# TARGET_bfin is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +TARGET_mips=y +# TARGET_nios is not set +# TARGET_nios2 is not set +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_x86_64 is not set + +# +# Target Architecture Features and Options +# +HAVE_ELF=y +ARCH_SUPPORTS_LITTLE_ENDIAN=y +TARGET_ARCH="mips" +ARCH_CFLAGS="-mno-split-addresses" +ARCH_SUPPORTS_BIG_ENDIAN=y +# CONFIG_MIPS_ISA_1 is not set +# CONFIG_MIPS_ISA_2 is not set +# CONFIG_MIPS_ISA_3 is not set +# CONFIG_MIPS_ISA_4 is not set +CONFIG_MIPS_ISA_MIPS32=y +# CONFIG_MIPS_ISA_MIPS64 is not set +ARCH_LITTLE_ENDIAN=y +# ARCH_BIG_ENDIAN is not set +# ARCH_HAS_NO_MMU is not set +ARCH_HAS_MMU=y +UCLIBC_HAS_FLOATS=y +HAS_FPU=y +DO_C99_MATH=y +KERNEL_SOURCE="/home/jp/buildroot_jp/build_test/toolchain_build_mipsel/linux" +C_SYMBOL_PREFIX="" +HAVE_DOT_CONFIG=y + +# +# General Library Settings +# +# HAVE_NO_PIC is not set +DOPIC=y +# HAVE_NO_SHARED is not set +HAVE_SHARED=y +# ARCH_HAS_NO_LDSO is not set +BUILD_UCLIBC_LDSO=y +# FORCE_SHAREABLE_TEXT_SEGMENTS is not set +LDSO_LDD_SUPPORT=y +LDSO_CACHE_SUPPORT=y +# LDSO_PRELOAD_FILE_SUPPORT is not set +LDSO_BASE_FILENAME="ld.so" +# DL_FINI_CRT_COMPAT is not set +UCLIBC_CTOR_DTOR=y +# HAS_NO_THREADS is not set +UCLIBC_HAS_THREADS=y +PTHREADS_DEBUG_SUPPORT=y +UCLIBC_HAS_LFS=y +# UCLIBC_STATIC_LDCONFIG is not set +# MALLOC is not set +# MALLOC_SIMPLE is not set +MALLOC_STANDARD=y +MALLOC_GLIBC_COMPAT=y +UCLIBC_DYNAMIC_ATEXIT=y +HAS_SHADOW=y +# UNIX98PTY_ONLY is not set +ASSUME_DEVPTS=y +UCLIBC_HAS_TM_EXTENSIONS=y +UCLIBC_HAS_TZ_CACHING=y +UCLIBC_HAS_TZ_FILE=y +UCLIBC_HAS_TZ_FILE_READ_MANY=y +UCLIBC_TZ_FILE_PATH="/etc/TZ" + +# +# Networking Support +# +UCLIBC_HAS_IPV6=y +UCLIBC_HAS_RPC=y +UCLIBC_HAS_FULL_RPC=y + +# +# String and Stdio Support +# +UCLIBC_HAS_STRING_GENERIC_OPT=y +UCLIBC_HAS_STRING_ARCH_OPT=y +UCLIBC_HAS_CTYPE_TABLES=y +UCLIBC_HAS_CTYPE_SIGNED=y +# UCLIBC_HAS_CTYPE_UNSAFE is not set +UCLIBC_HAS_CTYPE_CHECKED=y +# UCLIBC_HAS_CTYPE_ENFORCED is not set +UCLIBC_HAS_WCHAR=y +# UCLIBC_HAS_LOCALE is not set +UCLIBC_HAS_HEXADECIMAL_FLOATS=y +UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y +UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 +UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y +# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set +# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set +UCLIBC_HAS_STDIO_BUFSIZ_4096=y +# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set +UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set +UCLIBC_HAS_STDIO_GETC_MACRO=y +UCLIBC_HAS_STDIO_PUTC_MACRO=y +UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y +# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set +UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y +UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y +UCLIBC_HAS_PRINTF_M_SPEC=y +UCLIBC_HAS_ERRNO_MESSAGES=y +# UCLIBC_HAS_SYS_ERRLIST is not set +UCLIBC_HAS_SIGNUM_MESSAGES=y +# UCLIBC_HAS_SYS_SIGLIST is not set +UCLIBC_HAS_GNU_GETOPT=y + +# +# Big and Tall +# +UCLIBC_HAS_REGEX=y +# UCLIBC_HAS_WORDEXP is not set +UCLIBC_HAS_FTW=y +UCLIBC_HAS_GLOB=y + +# +# Library Installation Options +# +SHARED_LIB_LOADER_PREFIX="/lib" +RUNTIME_PREFIX="/" +DEVEL_PREFIX="/usr/" + +# +# uClibc security related options +# +# UCLIBC_SECURITY is not set + +# +# uClibc development/debugging options +# +CROSS_COMPILER_PREFIX="" +# DODEBUG is not set +# DOASSERTS is not set +# SUPPORT_LD_DEBUG is not set +# SUPPORT_LD_DEBUG_EARLY is not set +WARNINGS="-Wall" +# UCLIBC_MJN3_ONLY is not set -- cgit v1.2.3