From 9459f037bf6dd3ee73b6a647cc83b6b98d4c7478 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Sun, 5 Dec 2010 21:53:08 +0100
Subject: board: remove Valka v100sc2

This default configuration did not even build a kernel image, which is
the main point of having board default configuration. So remove it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
 .../valka/target_skeleton/etc/rc.d/00.virtualfs    | 24 --------------
 .../device/valka/target_skeleton/etc/rc.d/01.mdev  | 23 --------------
 .../valka/target_skeleton/etc/rc.d/02.localfs      | 22 -------------
 .../valka/target_skeleton/etc/rc.d/03.hostname     | 25 ---------------
 .../valka/target_skeleton/etc/rc.d/04.syslog       | 24 --------------
 .../device/valka/target_skeleton/etc/rc.d/05.klog  | 24 --------------
 .../valka/target_skeleton/etc/rc.d/06.modules      | 31 ------------------
 .../valka/target_skeleton/etc/rc.d/10.network      | 32 -------------------
 .../valka/target_skeleton/etc/rc.d/11.ntpdate      | 24 --------------
 target/device/valka/target_skeleton/etc/rc.d/crond | 27 ----------------
 .../device/valka/target_skeleton/etc/rc.d/dropbear | 37 ----------------------
 target/device/valka/target_skeleton/etc/rc.d/gpio  | 34 --------------------
 target/device/valka/target_skeleton/etc/rc.d/inetd | 27 ----------------
 .../device/valka/target_skeleton/etc/rc.d/lighttpd | 17 ----------
 .../device/valka/target_skeleton/etc/rc.d/nbd_swap | 31 ------------------
 target/device/valka/target_skeleton/etc/rc.d/ntpd  | 24 --------------
 .../device/valka/target_skeleton/etc/rc.d/onewire  | 34 --------------------
 .../device/valka/target_skeleton/etc/rc.d/portmap  | 31 ------------------
 18 files changed, 491 deletions(-)
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/00.virtualfs
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/01.mdev
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/02.localfs
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/03.hostname
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/04.syslog
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/05.klog
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/06.modules
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/10.network
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/11.ntpdate
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/crond
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/dropbear
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/gpio
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/inetd
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/lighttpd
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/nbd_swap
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/ntpd
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/onewire
 delete mode 100755 target/device/valka/target_skeleton/etc/rc.d/portmap

(limited to 'target/device/valka/target_skeleton/etc/rc.d')

diff --git a/target/device/valka/target_skeleton/etc/rc.d/00.virtualfs b/target/device/valka/target_skeleton/etc/rc.d/00.virtualfs
deleted file mode 100755
index 6c1a627a8..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/00.virtualfs
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Mounting virtual filesystems:"
-	mount_fs proc /proc proc
-	mount_fs sys /sys sysfs
-	mount_fs config /config configfs
-	mount_fs tmp /tmp tmpfs
-	mount_fs run /var/run tmpfs
-	mkdir_fs /var/run/lock
-	if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
-		mkdir_fs /dev/pts
-		mkdir_fs /dev/shm
-	fi
-	mount_fs ptr /dev/pts devpts
-	echo ""
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/01.mdev b/target/device/valka/target_skeleton/etc/rc.d/01.mdev
deleted file mode 100755
index a9a2da7c3..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/01.mdev
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Starting mdev: "
-	set -e
-	trap 'echo "Failed"' EXIT
-	${ln_program} -s /proc/self/fd /dev/fd
-	${ln_program} -s /proc/self/fd/0 /dev/stdin
-	${ln_program} -s /proc/self/fd/1 /dev/stdout
-	${ln_program} -s /proc/self/fd/2 /dev/stderr
-	${ln_program} -s /proc/kcore /dev/core
-	echo /sbin/mdev > /proc/sys/kernel/hotplug
-	${mdev_program} ${mdev_flags}
-	trap - EXIT
-	echo "Ok"
-}
-
-stop() {
-	return 0;
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/02.localfs b/target/device/valka/target_skeleton/etc/rc.d/02.localfs
deleted file mode 100755
index 2614d020f..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/02.localfs
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Mounting local filesystems: "
-	if ${mount_program} -a; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-stop() {
-	echo -n " * Unmounting local filesystems: "
-	if ${umount_program} -a 2>/dev/null; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/03.hostname b/target/device/valka/target_skeleton/etc/rc.d/03.hostname
deleted file mode 100755
index 5cbae3f78..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/03.hostname
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Settings hostname: "
-	if [ ! -x ${hostname_program} ]; then
-		log_error "Missing 'hostname' program (${hostname_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	if ${hostname_program} ${hostname}; then
-		echo "'${hostname}'"
-		echo ${hostname} > /etc/hostname
-	else
-		echo "Failed"
-		return 1
-	fi
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/04.syslog b/target/device/valka/target_skeleton/etc/rc.d/04.syslog
deleted file mode 100755
index b00347085..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/04.syslog
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Starting syslogd: "
-	if [ ! -x ${syslogd_program} ]; then
-		log_error "Missing 'syslogd' program (${syslogd_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	if ${syslogd_program}; then
-		echo "Ok"
-	else
-		echo "Failed"
-		exit 1
-	fi
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/05.klog b/target/device/valka/target_skeleton/etc/rc.d/05.klog
deleted file mode 100755
index 1d018392f..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/05.klog
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Starting klogd: "
-	if [ ! -x ${klogd_program} ]; then
-		log_error "Missing 'klogd' program (${klogd_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	if ${klogd_program}; then
-		echo "Ok"
-	else
-		echo "Failed "
-		exit 1
-	fi
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/06.modules b/target/device/valka/target_skeleton/etc/rc.d/06.modules
deleted file mode 100755
index af800d4d3..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/06.modules
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	if checkyesno ${modules_enable}; then
-		if [ ! -x "${modprobe_program}" -o ! -f "/etc/modules" ]; then
-			echo "Missing 'modprobe_program' program (${modprobe_program})"
-			exit 1
-		else
-			echo
-		fi
-
-		echo -n "Loading modules: " 
-		grep '^[^#]' "/etc/modules" | \
-		while read module args; do
-			[ "$module" ] || continue
-			if ${modprobe_program} $module $args; then
-				echo -n "$module "
-			else
-				echo -n "$module=failed "
-			fi
-		done
-		echo ""
-	fi
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/10.network b/target/device/valka/target_skeleton/etc/rc.d/10.network
deleted file mode 100755
index ebe092a0e..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/10.network
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Network interfaces: "
-	if checkyesno ${eth0_enable}; then
-		if ${ifup_program} eth0 > /dev/null 2>&1; then
-			echo -n "eth0 "
-		else
-			echo -n "eth0=failed "
-		fi
-	fi
-	if checkyesno ${eth1_enable}; then
-		if ${ifup_program} eth1 > /dev/null 2>&1; then
-			echo -n "eth1"
-		else
-			echo -n "eth1=failed"
-		fi
-	fi
-	echo ""
-}
-
-stop() {
-	echo -n " * Stopping network interfaces: "
-	if ${ifdown_program} -fa > /dev/null 2>&1; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-rc_run_command "$1"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/11.ntpdate b/target/device/valka/target_skeleton/etc/rc.d/11.ntpdate
deleted file mode 100755
index 94f2626d1..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/11.ntpdate
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Running ntpdate: "
-	if [ ! -x ${ntpdate_program} ]; then
-		log_error "Missing 'ntpdate' program (${ntpdate_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	if ${ntpdate_program} ${ntpdate_flags} ${ntpdate_servers} > /dev/null 2>&1; then
-		echo "Ok"
-	else
-		echo "Failed"
-		exit 1
-	fi
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1" "ntpdate"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/crond b/target/device/valka/target_skeleton/etc/rc.d/crond
deleted file mode 100755
index ef1b7fee0..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/crond
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Starting crond: "
-	if [ ! -x ${crond_program} ]; then
-		log_error "Missing 'crond' program (${crond_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	${crond_program} -f -c ${crond_dir} ${crond_flags} &
-	pid=$!
-	if [ "$?" -eq 0 ]; then
-		echo "${pid}" > ${crond_pidfile}
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-stop() {
-	echo " * Stopping crond..."
-	killpid ${crond_pidfile}
-}
-
-rc_run_command "$1" "crond"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/dropbear b/target/device/valka/target_skeleton/etc/rc.d/dropbear
deleted file mode 100755
index 0868b2acf..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/dropbear
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-. /etc/rc.subr
-
-start() {
-	if [ ! -d /etc/dropbear ]; then                                         
-		if ! mkdir_fs /etc/dropbear; then                               
-			return 1                                                
-		fi       
-	fi 
-
-	# Check for the Dropbear RSA key
-	if [ ! -f /etc/dropbear/dropbear_rsa_host_key ] ; then
-		echo -n " * Generating SSH RSA Key: "
-		${dropbearkey_program} -t rsa -f /etc/dropbear/dropbear_rsa_host_key > /dev/null 2>&1
-		echo "Ok"
-	fi
-
-	# Check for the Dropbear DSS key
-	if [ ! -f /etc/dropbear/dropbear_dss_host_key ] ; then
-		echo -n " * Generating SSH DSS Key: "
-		${dropbearkey_program} -t dss -f /etc/dropbear/dropbear_dss_host_key > /dev/null 2>&1
-		echo "Ok"
-	fi
-
- 	echo -n " * Starting dropbear sshd: "
-	if ${dropbear_program} -P ${dropbear_pidfile} ${dropbear_flags}; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-stop() {
-	echo " * Stopping dropbear sshd..."
-	killpid "${dropbear_pidfile}"
-}
-
-rc_run_command "$1" "dropbear"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/gpio b/target/device/valka/target_skeleton/etc/rc.d/gpio
deleted file mode 100755
index 39eb74dcc..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/gpio
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Setting up GPIO: "
-
-	if ! create_gpio "io0" 1 0x03f8802a 0x03f88000; then
-		log_error "io0 failed"
-		echo "failed"
-		return 1
-	fi
-	if ! create_gpio "io1" 0 0xaa800000 0x00000000; then
-		log_error "io1 failed"
-		echo "failed"
-		return 1
-	fi
-	echo "Ok"
-}
-
-stop() {
-	return 0
-}
-
-create_gpio() {
-	if ! mkdir_fs /config/gpio/${1}; then
-		return 1
-	fi
-	echo "${2}" > /config/gpio/${1}/gpio_id
-	echo "${3}" > /config/gpio/${1}/pin_mask
-	echo "${4}" > /config/gpio/${1}/oe_mask
-	echo "1" > /config/gpio/${1}/enabled
-}
-
-rc_run_command "$1" "gpio"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/inetd b/target/device/valka/target_skeleton/etc/rc.d/inetd
deleted file mode 100755
index f0d8d8452..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/inetd
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Starting inetd: "
-	 if [ ! -x ${inetd_program} ]; then
-		log_error "Missing 'inetd' program (${inetd_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	${inetd_program} -f ${inetd_flags} &
-	pid=$!
-	if [ "$?" -eq 0 ]; then
-		echo "${pid}" > ${inetd_pidfile}
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-stop() {
-	echo " * Stopping inetd..."
-	killpid ${inetd_pidfile}
-}
-
-rc_run_command "$1" "inetd"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/lighttpd b/target/device/valka/target_skeleton/etc/rc.d/lighttpd
deleted file mode 100755
index 97ff2f46a..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/lighttpd
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-. /etc/rc.subr
-
-start() {
- 	echo -n " * Starting lighttpd: "
-	if ${lighttpd_program} ${lighttpd_flags}; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-stop() {
-	echo " * Stopping lighttpd..."
-	killpid "${lighttpd_pidfile}"
-}
-
-rc_run_command "$1" "lighttpd"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/nbd_swap b/target/device/valka/target_skeleton/etc/rc.d/nbd_swap
deleted file mode 100755
index b2a4a9c25..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/nbd_swap
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	echo -n " * Starting nbd swap: "
-	 if [ ! -x ${nbd_swap_program} ]; then
-		log_error "Missing 'nbd_client' program (${nbd_swap_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	mknod ${nbd_swap_device} b 43 0
-	${nbd_swap_program} ${nbd_swap_server} ${nbd_swap_port} ${nbd_swap_device} &
-	pid=$!
-	if [ "$?" -eq 0 ]; then
-		echo "${pid}" > ${nbd_swap_pidfile}
-		mkswap ${nbd_swap_device}
-		swapon ${nbd_swap_device}
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-stop() {
-	echo " * Stopping nbd swap..."
-	swapoff ${nbd_swap_device}
-	killpid ${nbd_swap_pidfile}
-}
-
-rc_run_command "$1" "nbd_swap"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/ntpd b/target/device/valka/target_skeleton/etc/rc.d/ntpd
deleted file mode 100755
index 291da6317..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/ntpd
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	if [ ! -x ${ntpd_program} ]; then
-		log_error "Missing 'ntpd' program (${ntpd_program})"
-		echo "Failed"
-		return 1
-	fi
-
-	echo -n " * Starting ntpd: "
-	if ${ntpd_program} -c ${ntpd_config} -p ${ntpd_pidfile} ${ntpd_flags}; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-stop() {
-	echo " * Stopping ntpd..."
-	killpid ${ntpd_pidfile}
-}
-
-rc_run_command "$1" "ntpd"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/onewire b/target/device/valka/target_skeleton/etc/rc.d/onewire
deleted file mode 100755
index 332215463..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/onewire
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/ash
-. /etc/rc.subr
-
-start() {
-	if checkyesno ${onewire_thermal_enable}; then
-		echo -n " * Loading 1wire thermal module: "
-		if ${modprobe_program} w1_therm; then
-			echo "Ok"
-		else
-			echo "Failed" 
-		fi
-	fi 
-	if checkyesno ${onewire_id_enable}; then
-		echo -n " * Loading 1wire id module: "
-		if ${modprobe_program} w1_ds2433; then
-			echo "Ok"
-		else
-			echo "Failed" 
-		fi
-	fi
-
-	echo -n " * Loading 1wire module: "
-	if ${modprobe_program} ds2482 force=0,0x18; then
-		echo "Ok"
-	else
-		echo "Failed"
-	fi
-}
-
-stop() {
-	return 0
-}
-
-rc_run_command "$1" "onewire"
diff --git a/target/device/valka/target_skeleton/etc/rc.d/portmap b/target/device/valka/target_skeleton/etc/rc.d/portmap
deleted file mode 100755
index 12a7dc912..000000000
--- a/target/device/valka/target_skeleton/etc/rc.d/portmap
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-. /etc/rc.subr
-
-start() {
-	if checkyesno ${portmap_enable}; then
-		if [ ! -x ${portmap_program} ]; then
-			log_error "Missing 'portmap' program (${portmap_program})"
-			echo "Failed"
-			return 1
-		fi
-
-		echo -n " * Starting portmap: "
-		if ${portmap_program} ${portmap_flags}; then
-			mkdir -p /var/lock/subsys
-			touch /var/lock/subsys/portmap
-			echo "Ok"
-		else
-			echo "Failed"
-		fi
-	fi
-}
-
-
-stop() {
-	echo -n " * Stopping portmap: "
-	killall portmap
-	rm -rf /var/lock/subsys > /dev/null 2>&1
-	echo "Ok"
-}
-
-rc_run_command "$1"
-- 
cgit v1.2.3