From c73c1193f315acec70964d8c183f3484f002d280 Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Thu, 29 Jan 2009 17:22:49 +0000 Subject: Remove jp BSP which only provide support for linux-2.4 --- target/device/jp/q5/kernel-patches-2.4.26/001-q5 | 730 --------------------- .../jp/q5/kernel-patches-2.4.26/002-build_fixes | 81 --- .../q5/kernel-patches-2.4.26/004-correct_toolchain | 24 - .../device/jp/q5/kernel-patches-2.4.26/100-version | 11 - 4 files changed, 846 deletions(-) delete mode 100644 target/device/jp/q5/kernel-patches-2.4.26/001-q5 delete mode 100644 target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes delete mode 100644 target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain delete mode 100644 target/device/jp/q5/kernel-patches-2.4.26/100-version (limited to 'target/device/jp/q5/kernel-patches-2.4.26') diff --git a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 b/target/device/jp/q5/kernel-patches-2.4.26/001-q5 deleted file mode 100644 index 70ca0c555..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 +++ /dev/null @@ -1,730 +0,0 @@ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100 -@@ -16,7 +16,7 @@ all: au1000.o - - O_TARGET := au1000.o - --export-objs = prom.o clocks.o power.o usbdev.o -+export-objs = prom.o clocks.o power.o usbdev.o setup.o - - obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \ - clocks.o power.o setup.o sleeper.o -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100 -@@ -105,42 +105,8 @@ void __init pcibios_fixup(void) - - void __init pcibios_fixup_irqs(void) - { --#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) -- unsigned int slot, func; -- unsigned char pin; -- struct pci_dev *dev; -- -- pci_for_each_dev(dev) { -- if (dev->bus->number != 0) -- return; -- -- dev->irq = 0xff; -- slot = PCI_SLOT(dev->devfn); --#if defined( CONFIG_SOC_AU1500 ) -- switch (slot) { -- case 12: -- case 13: -- default: -- dev->irq = AU1000_PCI_INTA; -- break; -- } --#elif defined( CONFIG_SOC_AU1550 ) -- switch (slot) { -- default: -- case 12: -- dev->irq = AU1000_PCI_INTA; -- break; -- case 13: -- dev->irq = AU1000_PCI_INTB; -- break; -- } --#endif -- -- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -- DBG("slot %d irq %d\n", slot, dev->irq); -- } --#endif - } -+ - unsigned int pcibios_assign_all_busses(void) - { - return 0; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100 -@@ -81,7 +81,7 @@ void prom_init_cmdline(void) - } - - --char *prom_getenv(char *envname) -+char *prom_getenv_n(char *envname, int n) - { - /* - * Return a pointer to the given environment variable. -@@ -89,19 +89,24 @@ char *prom_getenv(char *envname) - */ - - t_env_var *env = (t_env_var *)prom_envp; -- int i; -+ int i, j=0; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { -- return(env->name + strlen(envname) + 1); -+ if(j++ == n) return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); - } - -+char *prom_getenv(char *envname) -+{ -+ return prom_getenv_n(envname, 0); -+} -+ - inline unsigned char str2hexnum(unsigned char c) - { - if(c >= '0' && c <= '9') -@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea, - } - } - --int get_ethernet_addr(char *ethernet_addr) -+int get_ethernet_addr_n(char *ethernet_addr, int n) - { - char *ethaddr_str; - -- ethaddr_str = prom_getenv("ethaddr"); -+ ethaddr_str = prom_getenv_n("ethaddr", n); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - --#if 0 -+#if 1 - { - int i; - -@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add - return 0; - } - -+int get_ethernet_addr(char *ethernet_addr) -+{ -+ return get_ethernet_addr_n(ethernet_addr, 0); -+} -+ - void prom_free_prom_memory (void) {} -+EXPORT_SYMBOL(get_ethernet_addr_n); - EXPORT_SYMBOL(prom_getcmdline); - EXPORT_SYMBOL(get_ethernet_addr); - EXPORT_SYMBOL(str2eaddr); -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100 -@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops; - #endif - - extern struct rtc_ops no_rtc_ops; -+void (*__wbflush) (void); - extern char * __init prom_getcmdline(void); - extern void __init board_setup(void); - extern void au1000_restart(char *); -@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr( - extern void au1xxx_time_init(void); - extern void au1xxx_timer_setup(void); - -+void au1500_wbflush(void) -+{ -+ __asm__ volatile ("sync"); -+} -+ - void __init au1x00_setup(void) - { - char *argptr; -@@ -89,6 +95,8 @@ void __init au1x00_setup(void) - } - #endif - -+ __wbflush = au1500_wbflush; -+ - #ifdef CONFIG_FB_AU1100 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); -@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr( - return phys_addr; - } - #endif -+ -+EXPORT_SYMBOL(__wbflush); -+ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100 -@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, - { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, - - { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S ---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100 -@@ -33,7 +33,9 @@ - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. - */ -- .fill 0x400 -+ j kernel_entry -+ nop -+ .org 0x400 - - /* The following two symbols are used for kernel profiling. */ - EXPORT(stext) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile ---- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200 -@@ -69,13 +69,13 @@ endif - set_gccflags = $(shell \ - while :; do \ - cpu=$(1); isa=-$(2); \ -- for gcc_opt in -march= -mcpu=; do \ -+ for gcc_opt in -march=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ - done; \ - cpu=$(3); isa=-$(4); \ -- for gcc_opt in -march= -mcpu=; do \ -+ for gcc_opt in -march=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ -@@ -90,7 +90,7 @@ else \ - fi; \ - gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ - while :; do \ -- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ -+ for gas_opt in -Wa,-march=; do \ - $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ - -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ - break 2; \ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c ---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100 -@@ -29,6 +29,7 @@ - #include - #include - #include -+#include - - void kbd_leds(unsigned char leds) - { -@@ -140,3 +141,46 @@ void __init kbd_init_hw(void) - { - printk("Dummy keyboard driver installed.\n"); - } -+ -+ -+void panic_blink(void) -+ { -+ } -+ -+ -+ int pckbd_translate(unsigned char scancode, unsigned char *keycode, -+ char raw_mode) -+ { -+ return 0; -+ } -+ -+ char pckbd_unexpected_up(unsigned char keycode) -+ { -+ return 0; -+ } -+ -+ -+ void pckbd_leds(unsigned char leds) -+ { -+ } -+ -+ -+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode) -+ { -+ return 0; -+ } -+ -+ int pckbd_getkeycode(unsigned int scancode) -+ { -+ return 0; -+ } -+ -+ void __init pckbd_init_hw(void) -+ { -+ } -+ -+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) -+ { -+ return 0; -+ } -+ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile ---- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100 -@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4. - list-multi := - - KEYMAP =defkeymap.o --KEYBD =pc_keyb.o -+KEYBD =dummy_keyb.o - CONSOLE =console.o - SERIAL =serial.o - -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100 -@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i - or tells us why it failed. */ - dq6 = CMD(1<<6); - dq5 = CMD(1<<5); -- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ -+ timeo = jiffies + HZ; /* setting timeout to 1ms for now */ - - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); -@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); - -- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { -- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); -- } else { -+ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) { - /* DQ5 is active so we can do a reset and stop the erase */ - cfi_write(map, CMD(0xF0), chip->start); - printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c ---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100 -@@ -86,28 +86,24 @@ static int mtd_parts_n - #else - static struct mtd_partition physmap_partitions[] = { - /* Put your own partition definitions here */ --#if 0 - { -- name: "bootROM", -- size: 0x80000, -+ name: "fs1", -+ size: 28*1024*1024, - offset: 0, -- mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "zImage", -- size: 0x100000, -+ name: "bootldr", -+ size: 128*1024, - offset: MTDPART_OFS_APPEND, - mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "ramdisk.gz", -- size: 0x300000, -+ name: "kernel", -+ size: 1*1024*1024, - offset: MTDPART_OFS_APPEND, -- mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "User FS", -+ name: "fs2", - size: MTDPART_SIZ_FULL, - offset: MTDPART_OFS_APPEND, - } --#endif - }; - - #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition)) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c ---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100 -@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether - extern inline void str2eaddr(unsigned char *ea, unsigned char *str); - extern inline unsigned char str2hexnum(unsigned char c); - extern char * __init prom_getcmdline(void); -+extern int get_ethernet_addr_n(char *ethernet_addr, int n); - - /* - * Theory of operation -@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de - return 0; - } - -+int ns_83847_reset(struct net_device *dev, int phy_addr) -+ { -+ s16 mii_control, timeout; -+ -+ // printk("ns_reset\n"); -+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); -+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); -+ mdelay(1); -+ for (timeout = 100; timeout > 0; --timeout) { -+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); -+ if ((mii_control & MII_CNTL_RESET) == 0) -+ break; -+ mdelay(1); -+ } -+ if (mii_control & MII_CNTL_RESET) { -+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); -+ return -1; -+ } -+ return 0; -+ } -+ -+int ns_83847_init(struct net_device *dev, int phy_addr) -+ { -+ s16 data; -+ // printk("ns_init\n"); -+ -+ /* Stop auto-negotiation */ -+ // data = mdio_read(dev, phy_addr, MII_CONTROL); -+ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); -+ // mdio_write(dev, phy_addr, 0, 0x0000); -+ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */); -+ -+ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */ -+ data = mdio_read(dev, phy_addr, MII_ANADV); -+ /* obs PAUSE bit */ -+ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ; -+ mdio_write(dev, phy_addr, MII_ANADV, data); -+ -+ /* Bypass led stretching? */ -+ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL); -+ data |= MII_NS_PHYCTRL_BP_STRETCH; -+ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data); -+ -+ /* Restart auto-negotiation */ -+ data = mdio_read(dev, phy_addr, MII_CONTROL); -+ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; -+ mdio_write(dev, phy_addr, MII_CONTROL, data); -+ -+ return 0; -+ } -+ -+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -+ { -+ u16 mii_data; -+ struct au1000_private *aup; -+ -+ if (!dev) { -+ printk(KERN_ERR "ns_83847_status error: NULL dev\n"); -+ return -1; -+ } -+ aup = (struct au1000_private *) dev->priv; -+ -+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); -+ // printk("ns_status: %04x\n", mii_data); -+ if (mii_data & MII_STAT_LINK) { -+ *link = 1; -+ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS); -+ if (mii_data & MII_NS_PHYSTS_SPEED_10) { -+ *speed = IF_PORT_10BASET; -+ dev->if_port = IF_PORT_10BASET; -+ } -+ else { -+ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) { -+ *speed = IF_PORT_100BASEFX; -+ dev->if_port = IF_PORT_100BASEFX; -+ } -+ else { -+ *speed = IF_PORT_100BASETX; -+ dev->if_port = IF_PORT_100BASETX; -+ } -+ } -+ -+ } -+ else { -+ *link = 0; -+ *speed = 0; -+ dev->if_port = IF_PORT_UNKNOWN; -+ } -+ return 0; -+ } -+ -+ -+ - #ifdef CONFIG_MIPS_BOSPORUS - int stub_init(struct net_device *dev, int phy_addr) - { -@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int - } - #endif - -+struct phy_ops ns_83847_ops = { -+ ns_83847_init, -+ ns_83847_reset, -+ ns_83847_status, -+}; -+ - struct phy_ops bcm_5201_ops = { - bcm_5201_init, - bcm_5201_reset, -@@ -667,6 +767,7 @@ static struct mii_chip_info { - struct phy_ops *phy_ops; - int dual_phy; - } mii_chip_table[] = { -+ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops }, - {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, - {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, - {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, -@@ -868,6 +969,8 @@ static int mii_probe (struct net_device - } - } - } -+ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name); -+ return -1; - found: - - #ifdef CONFIG_MIPS_BOSPORUS -@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po - switch (ioaddr) { - case AU1000_ETH0_BASE: - case AU1500_ETH0_BASE: -- /* check env variables first */ - if (!get_ethernet_addr(ethaddr)) { - memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); - } else { -- /* Check command line */ -- argptr = prom_getcmdline(); -- if ((pmac = strstr(argptr, "ethaddr=")) == NULL) { -- printk(KERN_INFO "%s: No mac address found\n", -- dev->name); -- /* use the hard coded mac addresses */ -- } else { -- str2eaddr(ethaddr, pmac + strlen("ethaddr=")); -- memcpy(au1000_mac_addr, ethaddr, -- sizeof(dev->dev_addr)); -- } -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); - } - if (ioaddr == AU1000_ETH0_BASE) - aup->enable = (volatile u32 *) -@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po - - case AU1000_ETH1_BASE: - case AU1500_ETH1_BASE: -+ if (!get_ethernet_addr_n(ethaddr, 1)) { -+ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); -+ } else { -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); -+ } - if (ioaddr == AU1000_ETH1_BASE) - aup->enable = (volatile u32 *) - ((unsigned long)AU1000_MAC1_ENABLE); -@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po - aup->enable = (volatile u32 *) - ((unsigned long)AU1500_MAC1_ENABLE); - memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr)); -- dev->dev_addr[4] += 0x10; - setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR); - aup->mac_id = 1; - au_macs[1] = aup; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h ---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100 -@@ -86,6 +86,28 @@ - #define MII_STAT_CAN_TX_FDX 0x4000 - #define MII_STAT_CAN_T4 0x8000 - -+/* mii registers for NS 83847 */ -+#define MII_NS_PHYSTS 0x10 -+#define MII_NS_FCSCR 0x14 -+#define MII_NS_RECR 0x15 -+#define MII_NS_PCSR 0x16 -+#define MII_NS_PHYCTRL 0x19 -+#define MII_NS_10BTSCR 0x1a -+#define MII_NS_CDCTRL 0x1b -+ -+/* MII_NS_PHYSTS bits */ -+#define MII_NS_PHYSTS_LINK (1) -+#define MII_NS_PHYSTS_SPEED_10 (1<<1) -+#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2) -+ -+/* MII_NS_PHYCTRL bits */ -+#define MII_NS_PHYCTRL_BP_STRETCH (1<<8) -+ -+/* MII_NS_CDCTRL bits */ -+#define MII_NS_CDCTRL_CD_ENABLE (1<<15) -+#define MII_NS_CDCTRL_RISETIME (1<<11) -+#define MII_NS_CDCTRL_FALLTIME (1<<9) -+ - - #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ - #define MII_ID1_MODEL 0x03F0 /* model number */ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c ---- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200 -@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str - goto err_ioremap; - } - -- /* Work around the dropped serial bit. */ -+#ifdef __mips__ -+ if (get_ethernet_addr_n(dev->dev_addr, 2)) { -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); -+ } -+#else - prev_eedata = eeprom_read(ioaddr, 6); - for (i = 0; i < 3; i++) { - int eedata = eeprom_read(ioaddr, i + 7); -@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str - dev->dev_addr[i*2+1] = eedata >> 7; - prev_eedata = eedata; - } -+#endif - - dev->base_addr = ioaddr; - dev->irq = irq; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h ---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100 -@@ -302,9 +302,9 @@ typedef struct hermes_response { - #define hermes_read_reg(hw, off) ((hw)->io_space ? \ - inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ - readw((hw)->iobase + ( (off) << (hw)->reg_spacing ))) --#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \ -- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ -- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ))) -+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \ -+ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \ -+ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));} - - #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name)) - #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val))) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h ---- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100 -@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] - #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 - - /* Interrupt Numbers */ --#define AU1000_UART0_INT 0 -+#define AU1000_UART0_INT 3 - #define AU1000_UART1_INT 1 /* au1000 */ - #define AU1000_UART2_INT 2 /* au1000 */ - - #define AU1000_PCI_INTA 1 /* au1500 */ - #define AU1000_PCI_INTB 2 /* au1500 */ - --#define AU1000_UART3_INT 3 -+#define AU1000_UART3_INT 0 - - #define AU1000_SSI0_INT 4 /* au1000 */ - #define AU1000_SSI1_INT 5 /* au1000 */ -@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] - - - /* UARTS 0-3 */ --#define UART0_ADDR 0xB1100000 -+#define UART0_ADDR 0xB1400000 - #define UART1_ADDR 0xB1200000 - #define UART2_ADDR 0xB1300000 --#define UART3_ADDR 0xB1400000 -+#define UART3_ADDR 0xB1100000 - #define UART_BASE UART0_ADDR --#define UART_DEBUG_BASE UART3_ADDR -+#define UART_DEBUG_BASE UART0_ADDR - - #define UART_RX 0 /* Receive buffer */ - #define UART_TX 4 /* Transmit buffer */ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h ---- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100 -@@ -13,7 +13,6 @@ - #include - #include - --#ifdef __KERNEL__ - - /* - * PAGE_SHIFT determines the page size -@@ -30,6 +29,7 @@ - #define PAGE_SIZE (1L << PAGE_SHIFT) - #define PAGE_MASK (~(PAGE_SIZE-1)) - -+#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ - - #include -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h ---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100 -@@ -15,8 +15,11 @@ - - #ifdef CONFIG_CPU_HAS_WB - --extern void (*__wbflush)(void); --extern void wbflush_setup(void); -+//extern void (*__wbflush)(void); -+//extern void wbflush_setup(void); -+ -+ -+#define __wbflush() { __asm__ volatile ("sync"); } - - #define wbflush() \ - do { \ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h ---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100 -@@ -37,6 +37,7 @@ - #endif - - #if defined(__arm__) || defined(__mips__) -+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus - typedef u_int ioaddr_t; - #else - typedef u_short ioaddr_t; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h ---- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100 -@@ -112,7 +112,7 @@ typedef struct pccard_mem_map { - u_char map; - u_char flags; - u_short speed; -- u_long sys_start, sys_stop; -+ ioaddr_t sys_start, sys_stop; - u_int card_start; - } pccard_mem_map; - -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c ---- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100 -+++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100 -@@ -760,8 +760,6 @@ static void __init devfs_make_root(char - static void __init mount_root(void) - { - #ifdef CONFIG_ROOT_NFS -- if (MAJOR(ROOT_DEV) == NFS_MAJOR -- && MINOR(ROOT_DEV) == NFS_MINOR) { - if (mount_nfs_root()) { - sys_chdir("/root"); - ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev; -@@ -770,7 +768,6 @@ static void __init mount_root(void) - } - printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); - ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0); -- } - #endif - devfs_make_root(root_device_name); - create_dev("/dev/root", ROOT_DEV, root_device_name); - diff --git a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes deleted file mode 100644 index a5928504e..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes +++ /dev/null @@ -1,81 +0,0 @@ -diff -Naur linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c linux-2.4.26-q5/arch/mips/au1000/common/clocks.c ---- linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c 2003-08-25 07:44:39.000000000 -0400 -+++ linux-2.4.26-q5/arch/mips/au1000/common/clocks.c 2005-06-23 02:52:03.390000000 -0400 -@@ -85,9 +85,8 @@ - lcd_clock = sys_busclk / 4; - - if (lcd_clock > 50000) /* Epson MAX */ -- printk(__FUNCTION__ -- ": warning: LCD clock too high (%d KHz)\n", -- lcd_clock); -+ printk("%s: warning: LCD clock too high (%d KHz)\n", -+ __FUNCTION__, lcd_clock); - } - - unsigned int get_au1x00_lcd_clock(void) ---- linux-2.4.26-q5.org/arch/mips/kernel/time.c 2004-02-18 08:36:30.000000000 -0500 -+++ linux-2.4.26-q5/arch/mips/kernel/time.c 2005-06-23 03:13:07.720000000 -0400 -@@ -25,6 +25,7 @@ - #include - #include - -+#include - #include - #include - #include -@@ -242,7 +243,7 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (sll32_usecs_per_cycle) -- : "lo", "accum"); -+ : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -297,7 +298,7 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) -- : "lo", "accum"); -+ : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -339,7 +340,7 @@ - : "r" (timerhi), "m" (timerlo), - "r" (tmp), "r" (USECS_PER_JIFFY), - "r" (USECS_PER_JIFFY_FRAC) -- : "hi", "lo", "accum"); -+ : "hi", "lo", GCC_REG_ACCUM); - cached_quotient = quotient; - } - } -@@ -353,7 +354,7 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) -- : "lo", "accum"); -+ : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to checkdiff -Naur linux-2.4.26-q5.org/include/asm-mips/compiler.h linux-2.4.26-q5/include/asm-mips/compiler.h ---- linux-2.4.26-q5.org/include/asm-mips/compiler.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.26-q5/include/asm-mips/compiler.h 2005-06-23 02:52:25.000000000 -0400 -@@ -0,0 +1,17 @@ -+/* -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ */ -+#ifndef _ASM_COMPILER_H -+#define _ASM_COMPILER_H -+ -+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) -+#define GCC_REG_ACCUM "$0" -+#else -+#define GCC_REG_ACCUM "accum" -+#endif -+ -+#endif /* _ASM_COMPILER_H */ diff --git a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain deleted file mode 100644 index 53e509d3a..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain +++ /dev/null @@ -1,24 +0,0 @@ ---- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700 -+++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700 -@@ -17,16 +17,16 @@ - # Select the object file format to substitute into the linker script. - # - ifdef CONFIG_CPU_LITTLE_ENDIAN --tool-prefix = mipsel-linux- -+#tool-prefix = mipsel-linux- - ld-emul = elf32ltsmip - else --tool-prefix = mips-linux- -+#tool-prefix = mips-linux- - ld-emul = elf32btsmip - endif - --ifdef CONFIG_CROSSCOMPILE --CROSS_COMPILE = $(tool-prefix) --endif -+#ifdef CONFIG_CROSSCOMPILE -+#CROSS_COMPILE = $(tool-prefix) -+#endif - - MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot - diff --git a/target/device/jp/q5/kernel-patches-2.4.26/100-version b/target/device/jp/q5/kernel-patches-2.4.26/100-version deleted file mode 100644 index 813d45f15..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/100-version +++ /dev/null @@ -1,11 +0,0 @@ ---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 -+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 -@@ -1,7 +1,7 @@ - VERSION = 2 - PATCHLEVEL = 4 - SUBLEVEL = 26 --EXTRAVERSION = -+EXTRAVERSION =-q5 - - KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) - -- cgit v1.2.3