From e27fef51834042a1b108e04927a2a91742a54327 Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Thu, 3 Jul 2008 08:27:50 +0000 Subject: Add support for KwikByte KB9202 board, courtesy Brian Beattie --- .../kb9202/target_skeleton/etc/network/interfaces | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 target/device/KwikByte/kb9202/target_skeleton/etc/network/interfaces (limited to 'target/device/KwikByte/kb9202/target_skeleton/etc/network/interfaces') diff --git a/target/device/KwikByte/kb9202/target_skeleton/etc/network/interfaces b/target/device/KwikByte/kb9202/target_skeleton/etc/network/interfaces new file mode 100644 index 000000000..0bb96fd83 --- /dev/null +++ b/target/device/KwikByte/kb9202/target_skeleton/etc/network/interfaces @@ -0,0 +1,20 @@ +# /etc/network/interfaces -- configuration file for ifup/ifdown +# The loopback interface +# automatically added when upgrading +auto lo +iface lo inet loopback + +# the first network card - this entry was created during the +# installation automatically added when upgrading + +# static IP mode +# uncomment the next lines in this section (remove leading '#' characters) +#auto eth0 +#iface eth0 inet static +# address 192.160.1.79 +# netmask 255.255.255.0 + +# DHCP mode +# uncomment the next lines in this section (remove leading '#' characters) +#auto eth0 +#iface eth0 inet dhcp -- cgit v1.2.3