From 207503d59e43688d7fe22e78d565a7ac7df0de1e Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Sat, 20 Dec 2008 22:24:11 +0000 Subject: Add BSP for AP7200 --- .../Atmel/atstk1005/target_skeleton/etc/inittab | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 target/device/Atmel/atstk1005/target_skeleton/etc/inittab (limited to 'target/device/Atmel/atstk1005/target_skeleton/etc/inittab') diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/inittab b/target/device/Atmel/atstk1005/target_skeleton/etc/inittab new file mode 100644 index 000000000..82672b1bd --- /dev/null +++ b/target/device/Atmel/atstk1005/target_skeleton/etc/inittab @@ -0,0 +1,28 @@ +# Inittab for the ATSTK1000 development board +# +# Note: BusyBox init doesn't support runlevels. The runlevels field is +# completely ignored by BusyBox init. If you want runlevels, use sysvinit. +# +# Format for each entry: ::: +# +# id == tty to run on, or empty for /dev/console +# runlevels == ignored +# action == one of sysinit, respawn, askfirst, wait, and once +# process == program to run + +# Run the rcS script after kernel is booted. +::sysinit:/etc/init.d/rcS + +# Run a shell on the first serial port. Comment out if you want a getty instead. +ttyS0::respawn:-/bin/sh + +# Run a shell on the g_serial port (USB gadget device)? This shell will spawn +# error message if the device is not connected. +#ttygserial::respawn:-/bin/sh + +# Uncomment this to run a getty on the first serial port. +#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 +ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100 + +# Run a script on shutdown. +::shutdown:/etc/init.d/rcK -- cgit v1.2.3