From adebe9df0f42a929441d40e84f30e546f2852d68 Mon Sep 17 00:00:00 2001 From: Dimitry Golubovsky Date: Sat, 5 May 2012 16:05:18 +0000 Subject: package: add read-edid [Peter: fixup whitespace] Signed-off-by: Dmitry Signed-off-by: Peter Korsgaard --- package/read-edid/Config.in | 14 ++++++++++++++ package/read-edid/read-edid.mk | 19 +++++++++++++++++++ 2 files changed, 33 insertions(+) create mode 100644 package/read-edid/Config.in create mode 100644 package/read-edid/read-edid.mk (limited to 'package/read-edid') diff --git a/package/read-edid/Config.in b/package/read-edid/Config.in new file mode 100644 index 000000000..bdcb7a7d2 --- /dev/null +++ b/package/read-edid/Config.in @@ -0,0 +1,14 @@ +config BR2_PACKAGE_READ_EDID + bool "read-edid" + depends on BR2_i386 + help + Read-edid is a pair of tools for reading the EDID from a + monitor. It should work with most monitors made since 1996 + (except for newer ones with 256-byte EDID's - WiP), assuming + the video card supports the standard read commands (most + do). Read-edid is a set of two tools - get-edid, which gets + the raw edid information from the monitor, and parse-edid, + which turns the raw binary information into an + XF86Config-compatible monitor section. + + http://polypux.org/projects/read-edid/ diff --git a/package/read-edid/read-edid.mk b/package/read-edid/read-edid.mk new file mode 100644 index 000000000..b568d5b8b --- /dev/null +++ b/package/read-edid/read-edid.mk @@ -0,0 +1,19 @@ +############################################ +# +# read-edid +# +############################################ + +READ_EDID_VERSION = 1.4.2 +READ_EDID_SITE = http://www.polypux.org/projects/read-edid/ + +define READ_EDID_BUILD_CMDS + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) +endef + +define READ_EDID_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid + $(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid +endef + +$(eval $(call AUTOTARGETS)) -- cgit v1.2.3