From a90382616cfa02f784c24c8bc540c21e64c2c449 Mon Sep 17 00:00:00 2001 From: Samuel Martin Date: Sun, 11 Nov 2012 03:14:44 +0000 Subject: manual: rework using.txt and update common-usage.txt Consider the second chapter: "starting-up", as a tutorial. Assuming that, using.txt only contains the very first commands used to get configure and build its very first target system. So, the following subsection from using.txt have been to common-usage.txt: - Offline builds - Building out-of-tree - Environment variables Signed-off-by: Samuel Martin Signed-off-by: Peter Korsgaard --- docs/manual/using.txt | 100 ++++++++------------------------------------------ 1 file changed, 15 insertions(+), 85 deletions(-) (limited to 'docs/manual/using.txt') diff --git a/docs/manual/using.txt b/docs/manual/using.txt index 5741473c0..56ed23b02 100644 --- a/docs/manual/using.txt +++ b/docs/manual/using.txt @@ -5,8 +5,8 @@ Using Buildroot Buildroot has a nice configuration tool similar to the one you can find in the http://www.kernel.org/[Linux kernel] or in -http://www.busybox.net/[Busybox]. Note that you can (and should) build -everything as a normal user. There is no need to be root to configure +http://www.busybox.net/[Busybox]. Note that you can *and should build +everything as a normal user*. There is no need to be root to configure and use Buildroot. The first step is to run the configuration assistant: @@ -29,12 +29,11 @@ or to run the Qt or GTK-based configurators. All of these "make" commands will need to build a configuration -utility, so you may need to install "development" packages for -relevant libraries used by the configuration utilities. On Debian-like -systems, the +libncurses5-dev+ package is required to use the -'menuconfig' interface, +libqt4-dev+ is required to use the 'xconfig' -interface, and +libglib2.0-dev, libgtk2.0-dev and libglade2-dev+ are -needed to use the 'gconfig' interface. +utility (including the interface), so you may need to install +"development" packages for relevant libraries used by the +configuration utilities. Check the xref:requirement[] to know what +Buildroot needs, and specifically the xref:requirement-optional[system requirements] +to get the dependencies of favorite interface. For each menu entry in the configuration tool, you can find associated help that describes the purpose of the entry. @@ -56,9 +55,9 @@ tell Buildroot to run each package compilation with +make -jN+. This command will generally perform the following steps: * Download source files (as required) -* Configure, build and install the cross-compiling toolchain if an - internal toolchain is used, or import a toolchain if an external - toolchain is used +* Configure, build and install the cross-compiling toolchain using the + appropriate toolchain backend is used, or simply import a toolchain + if an external toolchain * Build/install selected target packages * Build a kernel image, if selected * Build a bootloader image, if selected @@ -105,81 +104,12 @@ This directory contains several subdirectories: * +toolchain/+ contains the build directories for the various components of the cross-compilation toolchain. -Offline builds --------------- +These commands, +make menuconfig|gconfig|xconfig+ and +make+, are the +basic ones that allow to easily and quickly generate images fitting +your needs, with all the supports and applications you enabled. -If you intend to do an offline build and just want to download -all sources that you previously selected in the configurator -('menuconfig', 'xconfig' or 'gconfig'), then issue: - --------------------- - $ make source --------------------- - -You can now disconnect or copy the content of your +dl+ -directory to the build-host. - -Building out-of-tree --------------------- - -Buildroot supports building out of tree with a syntax similar to the -Linux kernel. To use it, add +O=+ to the make command line: - --------------------- - $ make O=/tmp/build --------------------- - -Or: - --------------------- - $ cd /tmp/build; make O=$PWD -C path/to/buildroot --------------------- - -All the output files will be located under +/tmp/build+. - -When using out-of-tree builds, the Buildroot +.config+ and temporary -files are also stored in the output directory. This means that you can -safely run multiple builds in parallel using the same source tree as -long as they use unique output directories. - -For ease of use, Buildroot generates a Makefile wrapper in the output -directory - So after the first run, you no longer need to pass +O=..+ -and +-C ..+, simply run (in the output directory): - --------------------- - $ make --------------------- - -Environment variables ---------------------- -[[env-vars]] - -Buildroot also honors some environment variables, when they are passed -to +make+ or set in the environment: - -* +HOSTCXX+, the host C++ compiler to use -* +HOSTCC+, the host C compiler to use -* +UCLIBC_CONFIG_FILE=+, path to - the uClibc configuration file, used to compile uClibc, if an - internal toolchain is being built -* +BUSYBOX_CONFIG_FILE=+, path to - the Busybox configuration file -* +BUILDROOT_DL_DIR+ to override the directory in which - Buildroot stores/retrieves downloaded files - -An example that uses config files located in the toplevel directory and -in your $HOME: - --------------------- - $ make UCLIBC_CONFIG_FILE=uClibc.config BUSYBOX_CONFIG_FILE=$HOME/bb.config --------------------- - -If you want to use a compiler other than the default +gcc+ -or +g+++ for building helper-binaries on your host, then do - --------------------- - $ make HOSTCXX=g++-4.3-HEAD HOSTCC=gcc-4.3-HEAD --------------------- +More details about the "make" command usage are given in +xref:make-tips[]. Complying with opensource licenses ---------------------------------- -- cgit v1.2.3