From 1d989fafba761d29b3b2960bf388821d3ac0f6e7 Mon Sep 17 00:00:00 2001 From: "Arnout Vandecappelle (Essensium/Mind)" Date: Tue, 27 Nov 2012 11:59:16 +0000 Subject: manual: trivial fixes Signed-off-by: Arnout Vandecappelle (Essensium/Mind) Signed-off-by: Peter Korsgaard --- docs/manual/customize-uclibc-config.txt | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'docs/manual/customize-uclibc-config.txt') diff --git a/docs/manual/customize-uclibc-config.txt b/docs/manual/customize-uclibc-config.txt index d340c9aba..38a1575a5 100644 --- a/docs/manual/customize-uclibc-config.txt +++ b/docs/manual/customize-uclibc-config.txt @@ -18,17 +18,16 @@ follow these steps: similar to the one used in the Linux kernel or Buildroot, appears. Make your configuration changes as appropriate. -* Copy the +$(O)/toolchain/uclibc-VERSION/.config+ file to a different - place (like +toolchain/uClibc/uClibc-myconfig.config+, or - +board/mymanufacturer/myboard/uClibc.config+) and adjust the uClibc - configuration (configuration option +BR2_UCLIBC_CONFIG+) to use this +* Copy the +$(O)/toolchain/uClibc-VERSION/.config+ file to a different + place (e.g. +board/MANUFACTURER/BOARDNAME/uClibc.config+) and adjust + the uClibc configuration file option +BR2_UCLIBC_CONFIG+ to refer to this configuration instead of the default one. * Run the compilation of Buildroot again. -Otherwise, you can simply change +toolchain/uClibc/uClibc.config+, +Otherwise, you can simply change +toolchain/uClibc/uClibc-VERSION.config+, without running the configuration assistant. -If you want to use an existing config file for uclibc, then see +If you want to use an existing config file for uClibc, then see xref:env-vars[]. -- cgit v1.2.3