From f66d4b05e1dc9f835b2ca9fcd012e1a8d2aeed3f Mon Sep 17 00:00:00 2001 From: Philippe Reynes Date: Sun, 5 Dec 2010 21:53:22 +0100 Subject: board: Add Qemu SH4 r2d configuration [ Thomas: * renamed sh4_defconfig to qemu_sh4_r2d_defconfig, for consistency with other Qemu platforms supported * renamed board/qemu/sh4 to board/qemu/sh4-r2d * minor fixes in the readme.txt * remove useless statements in the minimal defconfig * switch to a fixed kernel version instead of "same as headers" ] Signed-off-by: Philippe Reynes Signed-off-by: Thomas Petazzoni Signed-off-by: Peter Korsgaard --- board/qemu/sh4-r2d/readme.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 board/qemu/sh4-r2d/readme.txt (limited to 'board/qemu/sh4-r2d/readme.txt') diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt new file mode 100644 index 000000000..b237596ea --- /dev/null +++ b/board/qemu/sh4-r2d/readme.txt @@ -0,0 +1,17 @@ +This little documentation explains how to build a kernel and a rootfs +for qemu with sh4 architecture. + +1) Select qemu sh4 configuration and compile it : + +make sh4_defconfig +make all + +2) Run qemu-system-sh4 with the kernel and rootfs previously generated + +It's recommended to use a git release for qemu (the current stable +version has framebuffer display issues). If you want to avoid building +all target, you can use this option on qemu configure : +--target-list=sh4-softmmu + +The command is : +qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append root=/dev/sda console=ttySC1,115200 noiotrap -- cgit v1.2.3