From 756b2f1f98f39b7015322489028df3d14d0531ff Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Tue, 6 Jan 2009 16:21:36 +0000 Subject: Remove patches that should not have been inlcuded in the spimux commit --- .../u-boot-2009.01-rc1-012-ethinit.patch | 77 - .../u-boot-2009.01-rc1-013-configs.patch | 130 - .../u-boot-2009.01-rc1-014-at572d940hfeb.patch | 3866 -------------------- .../u-boot-2009.01-rc1-016-cmd_mem.patch | 412 --- 4 files changed, 4485 deletions(-) delete mode 100644 target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch delete mode 100644 target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch delete mode 100644 target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch delete mode 100644 target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch deleted file mode 100644 index c2f709c70..000000000 --- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch +++ /dev/null @@ -1,77 +0,0 @@ -diff -urN u-boot-2009.01-0rig//common/cmd_ethinit.c u-boot-2009.01/common/cmd_ethinit.c ---- u-boot-2009.01-0rig//common/cmd_ethinit.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01/common/cmd_ethinit.c 2009-01-04 00:28:39.000000000 +0100 -@@ -0,0 +1,62 @@ -+/* -+ * (C) Copyright 2000 -+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Boot support -+ */ -+#include -+#include -+#include -+#ifdef CONFIG_CMD_ETHINIT -+extern int eth_init (bd_t * bd); -+ -+static void delay(void) -+{ -+} -+/* -+ * This command allows you to delay booting until you have a -+ * valid Ethernet connection. -+ * Neccessary if you want to NFS mount a rootfs etc. -+ * When both this target and the NFS server -+ * are powered on at the same time, then the NFS -+ * server can take a long time to boot. -+ */ -+int do_ethinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -+{ -+ int i; -+ DECLARE_GLOBAL_DATA_PTR; -+ while(eth_init (gd->bd) == 0) { -+ for(i = 0; i < 10000000; i ++) { -+ delay(); -+ } -+ } -+ return 0; -+} -+ -+U_BOOT_CMD( -+ ethinit, 1, 1, do_ethinit, -+ "ethinit\t- Initialize Ethernet controller\n", -+ "\n" -+); -+ -+#endif /* CONFIG_CMD_ETHINIT */ -diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile ---- u-boot-2009.01-0rig//common/Makefile 2009-01-04 00:22:06.000000000 +0100 -+++ u-boot-2009.01/common/Makefile 2009-01-04 00:29:46.000000000 +0100 -@@ -83,6 +83,7 @@ - COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o - COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o - COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o -+COBJS-$(CONFIG_CMD_ETHINIT) += cmd_ethinit.o - COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o - COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o - COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch deleted file mode 100644 index e65645b69..000000000 --- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch +++ /dev/null @@ -1,130 +0,0 @@ -diff -urN u-boot-2009.01-0rig//include/configs/at91cap9adk.h u-boot-2009.01/include/configs/at91cap9adk.h ---- u-boot-2009.01-0rig//include/configs/at91cap9adk.h 2008-12-16 23:48:27.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91cap9adk.h 2009-01-04 00:43:58.000000000 +0100 -@@ -69,7 +69,9 @@ - #define CONFIG_ATMEL_LCD 1 - #define CONFIG_ATMEL_LCD_BGR555 1 - #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -- -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - #define CONFIG_BOOTDELAY 3 - - /* -diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h ---- u-boot-2009.01-0rig//include/configs/at91rm9200df.h 2009-01-02 17:37:43.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91rm9200df.h 2009-01-04 00:43:33.000000000 +0100 -@@ -123,6 +123,9 @@ - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_MII - #define CONFIG_CMD_NAND -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - #define CONFIG_CMD_AT91_SPIMUX - #define CONFIG_CMD_ETHINIT - -diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h ---- u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h 2009-01-02 10:03:11.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-04 00:42:52.000000000 +0100 -@@ -122,7 +122,11 @@ - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_MII - #define CONFIG_CMD_NAND -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - #define CONFIG_CMD_AT91_SPIMUX -+#define CONFIG_CMD_ETHINIT - - #define CONFIG_NAND_LEGACY - -diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h ---- u-boot-2009.01-0rig//include/configs/at91rm9200dk.h 2009-01-02 10:03:11.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-04 00:43:15.000000000 +0100 -@@ -120,7 +120,11 @@ - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_MII - #define CONFIG_CMD_NAND -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - #define CONFIG_CMD_AT91_SPIMUX -+#define CONFIG_CMD_ETHINIT - - #define CONFIG_NAND_LEGACY - -diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h ---- u-boot-2009.01-0rig//include/configs/at91rm9200ek.h 2009-01-02 17:37:43.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91rm9200ek.h 2009-01-04 00:42:35.000000000 +0100 -@@ -121,9 +121,11 @@ - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_MII - #define CONFIG_CMD_NAND -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - #define CONFIG_CMD_AT91_SPIMUX - #define CONFIG_CMD_ETHINIT -- - #define CONFIG_NAND_LEGACY - - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -diff -urN u-boot-2009.01-0rig//include/configs/at91sam9260ek.h u-boot-2009.01/include/configs/at91sam9260ek.h ---- u-boot-2009.01-0rig//include/configs/at91sam9260ek.h 2008-12-16 23:48:27.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91sam9260ek.h 2009-01-04 00:41:56.000000000 +0100 -@@ -74,10 +74,13 @@ - #include - #undef CONFIG_CMD_BDI - #undef CONFIG_CMD_IMI --#undef CONFIG_CMD_AUTOSCRIPT -+#define CONFIG_CMD_AUTOSCRIPT - #undef CONFIG_CMD_FPGA - #undef CONFIG_CMD_LOADS - #undef CONFIG_CMD_IMLS -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - - #define CONFIG_CMD_PING 1 - #define CONFIG_CMD_DHCP 1 -diff -urN u-boot-2009.01-0rig//include/configs/at91sam9261ek.h u-boot-2009.01/include/configs/at91sam9261ek.h ---- u-boot-2009.01-0rig//include/configs/at91sam9261ek.h 2008-12-16 23:48:27.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91sam9261ek.h 2009-01-04 00:44:11.000000000 +0100 -@@ -68,6 +68,9 @@ - #define CONFIG_ATMEL_LCD 1 - #define CONFIG_ATMEL_LCD_BGR555 1 - #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - - #define CONFIG_BOOTDELAY 3 - -diff -urN u-boot-2009.01-0rig//include/configs/at91sam9263ek.h u-boot-2009.01/include/configs/at91sam9263ek.h ---- u-boot-2009.01-0rig//include/configs/at91sam9263ek.h 2008-12-16 23:48:27.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91sam9263ek.h 2009-01-04 00:44:34.000000000 +0100 -@@ -69,6 +69,9 @@ - #define CONFIG_ATMEL_LCD 1 - #define CONFIG_ATMEL_LCD_BGR555 1 - #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - - #define CONFIG_BOOTDELAY 3 - -diff -urN u-boot-2009.01-0rig//include/configs/at91sam9rlek.h u-boot-2009.01/include/configs/at91sam9rlek.h ---- u-boot-2009.01-0rig//include/configs/at91sam9rlek.h 2008-12-16 23:48:27.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91sam9rlek.h 2009-01-04 00:44:54.000000000 +0100 -@@ -68,6 +68,9 @@ - #define CONFIG_ATMEL_LCD 1 - #define CONFIG_ATMEL_LCD_RGB565 1 - #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -+#define CONFIG_CMD_FACTORY -+#define CONFIG_CMD_LED -+#define CONFIG_COLOURED_LED - - #define CONFIG_BOOTDELAY 3 - diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch deleted file mode 100644 index fd8516319..000000000 --- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch +++ /dev/null @@ -1,3866 +0,0 @@ -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/at572d940hfeb.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/at572d940hfeb.c ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/at572d940hfeb.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/at572d940hfeb.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,277 @@ -+/* (C) 2008 Copyright Atmel Corporation -+ * -+ * Antonio R. Costa atmel.com> -+ * gmail.com> -+ * -+ * (C) Copyright 2007-2008 -+ * Stelian Pop leadtechdesign.com> -+ * Lead Tech Design -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -+#include -+#endif -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+/* ------------------------------------------------------------------------- */ -+/* -+ * Miscelaneous platform dependent initialisations -+ */ -+ -+static void AT572D940HFEB_serial_hw_init(void) -+{ -+#ifdef CONFIG_USART0 -+ at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ -+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); -+#endif -+ -+#ifdef CONFIG_USART1 -+ at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ -+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD1 */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); -+#endif -+ -+#ifdef CONFIG_USART2 -+ at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ -+ at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); -+#endif -+ -+#ifdef CONFIG_USART3 /* DBGU */ -+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -+#endif -+} -+ -+#ifdef CONFIG_CMD_NAND -+static void AT572D940HFEB_nand_hw_init(void) -+{ -+ unsigned long csa; -+ -+ /* Enable CS3 */ -+ csa = at91_sys_read(AT91_MATRIX_EBICSA); -+ at91_sys_write(AT91_MATRIX_EBICSA, -+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); -+ -+ /* Configure SMC CS3 for NAND/SmartMedia */ -+ at91_sys_write(AT91_SMC_SETUP(3), -+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | -+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); -+ at91_sys_write(AT91_SMC_PULSE(3), -+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | -+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); -+ at91_sys_write(AT91_SMC_CYCLE(3), -+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); -+ at91_sys_write(AT91_SMC_MODE(3), -+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | -+ AT91_SMC_EXNWMODE_DISABLE | -+ AT91_SMC_DBW_8 | AT91_SMC_TDF_(2)); -+ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT572D940HF_ID_PIOC); -+ -+ /* Configure RDY/BSY */ -+ at91_set_gpio_input(AT91_PIN_PC16, 1); -+ -+ /* Enable NandFlash */ -+ /* By DIP switch on AT572D940HFEB */ -+ at91_set_gpio_output(AT91_PIN_PC14, 1); -+} -+#endif -+ -+#ifdef CONFIG_HAS_DATAFLASH -+static void AT572D940HFEB_spi_hw_init(void) -+{ -+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ -+ at91_set_A_periph(AT91_PIN_PA4, 0); /* SPI0_NPCS1 */ -+ -+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ -+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ -+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ -+ -+ /* Enable clock */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT572D940HF_ID_SPI0); -+} -+#endif -+ -+#ifdef CONFIG_MACB -+static void AT572D940HFEB_macb_hw_init(void) -+{ -+ /* Enable clock */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT572D940HF_ID_EMAC); -+ -+ /* Need to reset PHY -> 500ms reset */ -+#if 0 -+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | -+ (AT91_RSTC_ERSTL & (0x0D << 8)) | -+ AT91_RSTC_URSTEN); -+ -+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); -+ -+ /* Wait for end hardware reset */ -+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); -+ -+ /* Restore NRST value */ -+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | -+ (AT91_RSTC_ERSTL & (0x0 << 8)) | -+ AT91_RSTC_URSTEN); -+#endif -+ -+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ -+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ -+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ -+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ -+ at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ -+ at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ -+ at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ -+ at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ -+ at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ -+ at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ -+ at91_set_A_periph(AT91_PIN_PA15, 0); /* EFCE100 */ -+} -+#endif -+ -+#ifdef CONFIG_MMC -+static void AT572D940HFEB_mci_hw_init(void) -+{ -+ at91_sys_write(AT91_PMC_PCER, (1 << AT572D940HF_ID_MCI)); -+ -+ at91_set_A_periph(AT91_PIN_PC22,0); -+ at91_set_A_periph(AT91_PIN_PC23,0); -+ at91_set_A_periph(AT91_PIN_PC24,0); -+ at91_set_A_periph(AT91_PIN_PC25,0); -+ at91_set_A_periph(AT91_PIN_PC26,0); -+ at91_set_A_periph(AT91_PIN_PC27,0); -+} -+#endif -+ -+#ifdef CONFIG_USBH -+static void AT572D940HFEB_usbh_hw_init(void) -+{ -+ at91_sys_write(AT91_PMC_PCER, (1 << AT572D940HF_ID_UHP)); -+ at91_sys_write(AT91_PMC_SCER, AT572D940HF_PMC_UHP); -+} -+ -+int rstc_init(void) -+{ -+ /* Reads the SR to clean from -+ * previous resets -+ */ -+ at91_sys_read(AT91_RSTC_SR); -+ -+ /* Disble the USR_RST line, -+ * enable USR_RST_INT and -+ * sets the EXT_RST length to 2^14 -+ * (500ms needed by the phy) -+ */ -+ at91_sys_write(AT91_RSTC_MR, (0xa5<<24) | (13<<8) | AT91_RSTC_URSTIEN); -+ return 0; -+} -+ -+int board_init(void) -+{ -+ -+ /* Init the reset controller */ -+ rstc_init(); -+ -+ /* Init interrupts */ -+ interrupts_init(); -+ -+ /* Enable Ctrlc */ -+ console_init_f(); -+ -+ /* arch number of AT572D940HFEB-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_AT572D940HFEB; -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -+ -+ AT572D940HFEB_serial_hw_init(); -+ -+#ifdef CONFIG_CMD_NAND -+ AT572D940HFEB_nand_hw_init(); -+#endif -+ -+#ifdef CONFIG_HAS_DATAFLASH -+ AT572D940HFEB_spi_hw_init(); -+#endif -+ -+#ifdef CONFIG_MACB -+ AT572D940HFEB_macb_hw_init(); -+#endif -+ -+#ifdef CONFIG_MMC -+ AT572D940HFEB_mci_hw_init(); -+#endif -+ -+#ifdef CONFIG_USBH -+ AT572D940HFEB_usbh_hw_init(); -+#endif -+ -+#endif -+ gd->flags |= GD_FLG_RELOC; -+ -+ return 0; -+} -+ -+int dram_init(void) -+{ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; -+ return 0; -+} -+ -+#ifdef CONFIG_CMD_NET -+#ifdef CONFIG_RESET_PHY_R -+void reset_phy(void) -+{ -+#ifdef CONFIG_MACB -+ /* -+ * Initialize ethernet HW addr prior to starting Linux, -+ * needed for nfsroot -+ */ -+ eth_init(gd->bd); -+#endif /* CONFIG_MACB */ -+} -+#endif /* CONFIG_RESET_PHY_R */ -+ -+int board_eth_init(bd_t *bis) -+{ -+ int rc = 0; -+#ifdef CONFIG_MACB -+ rc = at572d940hf_eth_initialize(bis); -+#endif -+ return rc; -+} -+ -+#endif /* CONFIG_CMD_NET */ -+ -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/config.mk u-boot-2009.01-rc1/board/atmel/at572d940hfeb/config.mk ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/config.mk 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/config.mk 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1 @@ -+TEXT_BASE = 0x23f00000 -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/flash.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/flash.c ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/flash.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,507 @@ -+/* -+ * (C) Copyright 2002 -+ * Lineo, Inc. -+ * Bernhard Kuhn -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH -+ * Alex Zuepke -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+ -+ulong myflush(void); -+ -+ -+/* Flash Organization Structure */ -+typedef struct OrgDef -+{ -+ unsigned int sector_number; -+ unsigned int sector_size; -+} OrgDef; -+ -+ -+/* Flash Organizations */ -+ -+OrgDef OrgAT49BV642D[] = -+{ -+ { 8, 4*1024 }, -+ { 58, 32*1024 }, -+}; -+ -+OrgDef OrgAT49BV16x4[] = -+{ -+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ -+ { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ -+ { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ -+}; -+ -+OrgDef OrgAT49BV16x4A[] = -+{ -+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ -+ { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ -+}; -+ -+OrgDef OrgAT49BV6416[] = -+{ -+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ -+ { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ -+}; -+ -+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; -+ -+/* AT49BV1614A Codes */ -+#define FLASH_CODE1 0xAA -+#define FLASH_CODE2 0x55 -+#define ID_IN_CODE 0x90 -+#define ID_OUT_CODE 0xF0 -+ -+ -+#define CMD_READ_ARRAY 0x00F0 -+#define CMD_UNLOCK1 0x00AA -+#define CMD_UNLOCK2 0x0055 -+#define CMD_ERASE_SETUP 0x0080 -+#define CMD_ERASE_CONFIRM 0x0030 -+#define CMD_PROGRAM 0x00A0 -+#define CMD_UNLOCK_BYPASS 0x0020 -+#define CMD_SECTOR_UNLOCK 0x0070 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1))) -+ -+#define BIT_ERASE_DONE 0x0080 -+#define BIT_RDY_MASK 0x0080 -+#define BIT_PROGRAM_ERROR 0x0020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_identification (flash_info_t * info) -+{ -+ volatile u16 manuf_code, device_code, add_device_code; -+ -+ MEM_FLASH_ADDR1 = FLASH_CODE1; -+ MEM_FLASH_ADDR2 = FLASH_CODE2; -+ MEM_FLASH_ADDR1 = ID_IN_CODE; -+ -+ manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE; -+ device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2); -+ add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1)); -+ -+ MEM_FLASH_ADDR1 = FLASH_CODE1; -+ MEM_FLASH_ADDR2 = FLASH_CODE2; -+ MEM_FLASH_ADDR1 = ID_OUT_CODE; -+ -+ /* Vendor type */ -+ info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; -+ printf ("Atmel: "); -+ -+ if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { -+ -+ if ((add_device_code & FLASH_TYPEMASK) == -+ (ATM_ID_BV1614A & FLASH_TYPEMASK)) { -+ info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; -+ printf ("AT49BV1614A (16Mbit)\n"); -+ } else { /* AT49BV1614 Flash */ -+ info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; -+ printf ("AT49BV1614 (16Mbit)\n"); -+ } -+ -+ } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { -+ info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; -+ printf ("AT49BV6416 (64Mbit)\n"); -+ } -+} -+ -+ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) -+{ -+ int i, nb_sectors = 0; -+ -+ for (i=0; istart[sector]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ *addr = CMD_SECTOR_UNLOCK; -+} -+ -+ -+ulong flash_init (void) -+{ -+ int i, j, k; -+ unsigned int flash_nb_blocks, sector; -+ unsigned int start_address; -+ OrgDef *pOrgDef; -+ -+ ulong size = 0; -+ -+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_identification (&flash_info[i]); -+ -+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV1614 & FLASH_TYPEMASK)) { -+ -+ pOrgDef = OrgAT49BV16x4; -+ flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); -+ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ -+ -+ pOrgDef = OrgAT49BV16x4A; -+ flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); -+ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ -+ -+ pOrgDef = OrgAT49BV6416; -+ flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); -+ } else { -+ flash_nb_blocks = 0; -+ pOrgDef = OrgAT49BV16x4; -+ } -+ -+ flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); -+ memset (flash_info[i].protect, 0, flash_info[i].sector_count); -+ -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ -+ sector = 0; -+ start_address = flashbase; -+ flash_info[i].size = 0; -+ -+ for (j = 0; j < flash_nb_blocks; j++) { -+ for (k = 0; k < pOrgDef[j].sector_number; k++) { -+ flash_info[i].start[sector++] = start_address; -+ start_address += pOrgDef[j].sector_size; -+ flash_info[i].size += pOrgDef[j].sector_size; -+ } -+ } -+ -+ size += flash_info[i].size; -+ -+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ -+ -+ /* Unlock all sectors at reset */ -+ for (j=0; jflash_id & FLASH_VENDMASK) { -+ case (ATM_MANUFACT & FLASH_VENDMASK): -+ printf ("Atmel: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (ATM_ID_BV1614 & FLASH_TYPEMASK): -+ printf ("AT49BV1614 (16Mbit)\n"); -+ break; -+ case (ATM_ID_BV1614A & FLASH_TYPEMASK): -+ printf ("AT49BV1614A (16Mbit)\n"); -+ break; -+ case (ATM_ID_BV6416 & FLASH_TYPEMASK): -+ printf ("AT49BV6416 (64Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ return; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+} -+ -+/*-----------------------------------------------------------------------*/ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ulong result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip1; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (ATM_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ volatile u16 *addr = (volatile u16 *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip1 = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip1 = TMO; -+ break; -+ } -+ -+ if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip1 = READY; -+ -+ } while (!chip1); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip1 == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip1 == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+static int write_word (flash_info_t * info, ulong dest, ulong data) -+{ -+ volatile u16 *addr = (volatile u16 *) dest; -+ ulong result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip1; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip1 = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { -+ chip1 = ERR | TMO; -+ break; -+ } -+ if (!chip1 && ((result & 0x80) == (data & 0x80))) -+ chip1 = READY; -+ -+ } while (!chip1); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip1 == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong wp, data; -+ int rc; -+ -+ if (addr & 1) { -+ printf ("unaligned destination not supported\n"); -+ return ERR_ALIGN; -+ }; -+ -+ if ((int) src & 1) { -+ printf ("unaligned source not supported\n"); -+ return ERR_ALIGN; -+ }; -+ -+ wp = addr; -+ -+ while (cnt >= 2) { -+ data = *((volatile u16 *) src); -+ if ((rc = write_word (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 1) { -+ data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8); -+ if ((rc = write_word (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 1; -+ wp += 1; -+ cnt -= 1; -+ }; -+ -+ return ERR_OK; -+} -+ -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/interrupts.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/interrupts.c ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/interrupts.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/interrupts.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,83 @@ -+/* -+ * board/atmel/at572d940hfeb/interrupts.c -+ * Copyright 2008 (C) ATMEL -+ * Antonio R. Costa atmel.com> -+ * gmail.com> -+ * -+ * Advanced Interrupt Controller (AIC). -+ * Based on AT572D940HF datasheet. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+irq_handler_t handler_reset(void) -+{ -+ unsigned long rstc_sr=0; -+ -+ rstc_sr = at91_sys_read(AT91_RSTC_SR); -+ if(rstc_sr & AT91_RSTC_URSTS) { -+ while(!(at91_sys_read(AT91_RSTC_SR) & (1<<16))); -+ reset_cpu(1); -+ }; -+} -+ -+irq_handler_t handler_ext1(void) -+{ -+ puts("--- EXT1 IRQ ---\n"); -+} -+ -+ -+int reset_irqs(void) { -+ unsigned long ul = 0; -+ volatile unsigned long * psrc = _armboot_start; -+ volatile unsigned long * pdest = 0x0; -+ -+ /* -+ * Relocates U-Boot ARM IRQ vectors to 0 -+ * This is an ugly way to do it. -+ * More support must be offered by start.S -+ * on symbols and macros performing partial relocation -+ */ -+ -+ while(ul++ < 16) -+ *pdest++ = *psrc++; -+ -+ -+ /* Reset IRQ vectors */ -+ for(ul=0;ul<32;ul++) -+ RESET_IRQ_HANDLER(ul); -+ return 0; -+} -+ -+int interrupts_init(void) -+{ -+ reset_irqs(); -+ SET_IRQ_HANDLER(1 ,0x27,handler_reset); -+ SET_IRQ_HANDLER(30,0x27,handler_ext1); -+ return 0; -+} -+ -+ -+void do_irq(struct pt_regs* pregs) { -+ -+ unsigned long int ivr = AIC_REG(AIC_IVR); -+ unsigned long int isr = AIC_REG(AIC_ISR); -+ void (*irq_handler)(unsigned long int) = (void(*)(unsigned long int)) ivr; -+ -+ irq_handler(isr); -+ -+ /* Acknowledges irq */ -+ IRQ_ACKNOWLEDGE(ivr); -+ -+ return; -+}; -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/Makefile u-boot-2009.01-rc1/board/atmel/at572d940hfeb/Makefile ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/Makefile 2009-01-04 22:03:38.000000000 +0100 -@@ -0,0 +1,60 @@ -+# -+# (C) Copyright 2003-2008 -+# Wolfgang Denk, DENX Software Engineering, wd denx.de. -+# -+# -+# -+# -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).a -+ -+COBJS-y += at572d940hfeb.o -+#COBJS-y += led.o -+COBJS-y += partition.o -+#COBJS-y += flash.o -+COBJS-$(CONFIG_CMD_NAND) += nand.o -+#COBJS-$(CONFIG_CMD_MMC) += atmel_mci.o -+COBJS-$(CONFIG_USE_IRQ) += interrupts.o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS-y)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak $(obj).depend -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/nand.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/nand.c ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/nand.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,78 @@ -+/* -+ * (C) Copyright 2007-2008 -+ * Stelian Pop -+ * Lead Tech Design -+ * -+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* -+ * hardware specific access to control-lines -+ */ -+#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -+#define MASK_CLE (1 << 22) /* our CLE is AD22 */ -+ -+static void at572d940hfeb_nand_hwcontrol(struct mtd_info *mtd, -+ int cmd, unsigned int ctrl) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ if (ctrl & NAND_CTRL_CHANGE) { -+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; -+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); -+ -+ if (ctrl & NAND_CLE) -+ IO_ADDR_W |= MASK_CLE; -+ if (ctrl & NAND_ALE) -+ IO_ADDR_W |= MASK_ALE; -+ -+ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); -+ this->IO_ADDR_W = (void *) IO_ADDR_W; -+ } -+ -+ if (cmd != NAND_CMD_NONE) -+ writeb(cmd, this->IO_ADDR_W); -+} -+ -+static int at572d940hfeb_nand_ready(struct mtd_info *mtd) -+{ -+ return at91_get_gpio_value(AT91_PIN_PC13); -+} -+ -+int board_nand_init(struct nand_chip *nand) -+{ -+ nand->ecc.mode = NAND_ECC_SOFT; -+#ifdef CONFIG_SYS_NAND_DBW_16 -+ nand->options = NAND_BUSWIDTH_16; -+#endif -+ nand->cmd_ctrl = at572d940hfeb_nand_hwcontrol; -+ nand->dev_ready = at572d940hfeb_nand_ready; -+ nand->chip_delay = 20; -+ -+ return 0; -+} -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/partition.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/partition.c ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/partition.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/partition.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,39 @@ -+/* -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+#include -+#include -+#include -+#include -+ -+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; -+ -+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { -+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1} -+}; -+ -+/*define the area offsets*/ -+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { -+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, -+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, -+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, -+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, -+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, -+}; -+ -diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/u-boot.lds u-boot-2009.01-rc1/board/atmel/at572d940hfeb/u-boot.lds ---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/u-boot.lds 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm926ejs/start.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -+ -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/config.mk u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/config.mk ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/config.mk 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/config.mk 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,3 @@ -+PLATFORM_CPPFLAGS += -march=armv5te -+PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,) -+ -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/ether.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/ether.c ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/ether.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/ether.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,36 @@ -+/* -+ * (C) Copyright 2007-2008 -+ * Stelian Pop leadtechdesign.com> -+ * Lead Tech Design -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+ -+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); -+ -+#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -+void at572d940hf_eth_initialize(bd_t *bi) -+{ -+ macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); -+} -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/lowlevel_init.S u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/lowlevel_init.S ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/lowlevel_init.S 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/lowlevel_init.S 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* -+ * AT91CAP9/SAM9 setup stuff -+ * -+ * (C) Copyright 2007-2008 -+ * Stelian Pop leadtechdesign.com> -+ * Lead Tech Design -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+ -+#ifndef CONFIG_SKIP_LOWLEVEL_INIT -+ -+ .globl lowlevel_init -+ -+lowlevel_init: -+ -+/* -+ * Clocks/SDRAM initialization is handled by at91bootstrap, -+ * no need to do it here... -+ */ -+ mov pc, lr -+ -+ .ltorg -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/Makefile u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/Makefile ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/Makefile 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,53 @@ -+# -+# (C) Copyright 2000-2008 -+# Wolfgang Denk, DENX Software Engineering, wd denx.de. -+# -+# -+# -+# -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(SOC).a -+ -+COBJS-y += ether.o -+COBJS-y += timer.o -+COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o -+COBJS-y += usb.o -+SOBJS = lowlevel_init.o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) -+ -+all: $(obj).depend $(LIB) -+ -+$(LIB): $(OBJS) -+ $(AR) $(ARFLAGS) $@ $(OBJS) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/spi.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/spi.c ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/spi.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,158 @@ -+/* -+ * Driver for ATMEL DataFlash support -+ * Author : Hamid Ikdoumi (Atmel) -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ -+#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */ -+#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ -+ -+void AT91F_SpiInit(void) -+{ -+ /* Reset the SPI */ -+ writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); -+ -+ /* Configure SPI in Master Mode with No CS selected !!! */ -+ writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, -+ AT91_BASE_SPI + AT91_SPI_MR); -+ -+ /* Configure CS0 */ -+ writel(AT91_SPI_NCPHA | -+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) | -+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | -+ ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), -+ AT91_BASE_SPI + AT91_SPI_CSR(0)); -+ -+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 -+ /* Configure CS1 */ -+ writel(AT91_SPI_NCPHA | -+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) | -+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | -+ ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), -+ AT91_BASE_SPI + AT91_SPI_CSR(1)); -+#endif -+ -+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 -+ /* Configure CS3 */ -+ writel(AT91_SPI_NCPHA | -+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) | -+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | -+ ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), -+ AT91_BASE_SPI + AT91_SPI_CSR(3)); -+#endif -+ -+ /* SPI_Enable */ -+ writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); -+ -+ while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); -+ -+/* -+ * Add tempo to get SPI in a safe state. -+ * Should not be needed for new silicon (Rev B) -+ */ -+ udelay(500000); -+ readl(AT91_BASE_SPI + AT91_SPI_SR); -+ readl(AT91_BASE_SPI + AT91_SPI_RDR); -+ -+} -+ -+void AT91F_SpiEnable(int cs) -+{ -+ unsigned long mode; -+ -+ switch (cs) { -+ case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ -+ mode = readl(AT91_BASE_SPI + AT91_SPI_MR); -+ mode &= 0xFFF0FFFF; -+ writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), -+ AT91_BASE_SPI + AT91_SPI_MR); -+ break; -+ case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ -+ mode = readl(AT91_BASE_SPI + AT91_SPI_MR); -+ mode &= 0xFFF0FFFF; -+ writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), -+ AT91_BASE_SPI + AT91_SPI_MR); -+ break; -+ case 3: -+ mode = readl(AT91_BASE_SPI + AT91_SPI_MR); -+ mode &= 0xFFF0FFFF; -+ writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), -+ AT91_BASE_SPI + AT91_SPI_MR); -+ break; -+ } -+ -+ /* SPI_Enable */ -+ writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); -+} -+ -+unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); -+ -+unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) -+{ -+ unsigned int timeout; -+ -+ pDesc->state = BUSY; -+ -+ writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); -+ -+ /* Initialize the Transmit and Receive Pointer */ -+ writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); -+ writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); -+ -+ /* Intialize the Transmit and Receive Counters */ -+ writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); -+ writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); -+ -+ if (pDesc->tx_data_size != 0) { -+ /* Initialize the Next Transmit and Next Receive Pointer */ -+ writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); -+ writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); -+ -+ /* Intialize the Next Transmit and Next Receive Counters */ -+ writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); -+ writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); -+ } -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked(); -+ timeout = 0; -+ -+ writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); -+ while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && -+ ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT)); -+ writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); -+ pDesc->state = IDLE; -+ -+ if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) { -+ printf("Error Timeout\n\r"); -+ return DATAFLASH_ERROR; -+ } -+ -+ return DATAFLASH_OK; -+} -+ -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/timer.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/timer.c ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/timer.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/timer.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,293 @@ -+/* -+ * (C) Copyright 2007-2008 -+ * Stelian Pop leadtechdesign.com> -+ * Lead Tech Design -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Author: Antonio R. Costa -+ * based upon AT91 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by -+ * setting the 20 bit counter period to its maximum (0xfffff). -+ */ -+#define TIMER_LOAD_VAL 0xfffff -+#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR) -+#define READ_TIMER at91_sys_read(AT91_PIT_PIIR) -+#define TIMER_FREQ (AT91_MASTER_CLOCK << 4) -+#define TICKS_TO_USEC(ticks) ((ticks) / 6) -+ -+ulong get_timer_masked(void); -+ulong resettime; -+ -+int sys_get_freq(unsigned long mode, unsigned long *pfreq) -+{ -+ unsigned long mckr = (unsigned long) -1; -+ unsigned long clksrc=0; -+ unsigned long clkpre=0; -+ unsigned long clkdiv=0; -+ unsigned long main_clock=0; -+ unsigned long tmode = mode; -+ -+ -+ /*!This function checks for \c AT91_CLK_DELAY_CYCLES cycles if the main clock is ready. -+ * If it is not it exits with \c -EIO. -+ * Otherwise, assuming a slow clock of \c CONFIG_SLOW_CLK Hz (default 32768 Hz), it computes -+ * the number of main clock cycles occurring in 16 slow clock cycles. -+ * This number multiplied by (_GNAM_SLOW_CLK / 16) results in the -+ * actual frequency of the main clock. -+ */ -+ { -+ long tmp = AT91_CLK_DELAY_CYCLES; -+ while(!(at91_sys_read(AT91_CKGR_MCFR) & AT91_PMC_MAINRDY) && (tmp-- > 0)); -+ if(tmp <= 0) { -+ *pfreq = 0; -+ return -EIO; -+ } -+ } -+ -+ main_clock = (at91_sys_read(AT91_CKGR_MCFR) & AT91_PMC_MAINF) * (CONFIG_SLOW_CLK / 16); -+ -+ /*!Depending on the \c mode parameter, this function returns frequencies -+ * for the slow clock, main clock, \b PLLA, \b PLLB or master clock. -+ */ -+ -+ /*!In the last case the function reads the PMC to find which source -+ * has been selected for the master clock and perform the relevant -+ * computations. -+ */ -+ -+ if(AT91_SLOW_FREQ == mode) { -+ *pfreq = CONFIG_SLOW_CLK; -+ return 0; -+ } -+ -+ /* Little trick: master clock depends on another source, -+ * so here it checks for the selected source and -+ * change the mode param to the master clock source -+ */ -+ if((AT91_SYS_FREQ == mode) | (AT91_PROC_FREQ == mode)) { -+ mckr = at91_sys_read(AT91_PMC_MCKR); -+ clksrc = (mckr & AT91_PMC_CSS ) ; -+ clkpre = (mckr & AT91_PMC_PRES) >> 2; -+ clkdiv = (mckr & AT91_PMC_MDIV) >> 8; -+ tmode = clksrc; -+ } -+ -+ if(AT91_PMC_CSS_MAIN == tmode) -+ *pfreq = main_clock; -+ -+ if(AT91_PMC_CSS_PLLA == tmode) { -+ unsigned long pllar = at91_sys_read(AT91_CKGR_PLLAR); -+ unsigned long mula = (pllar & AT91_PMC_MUL) >> 16; -+ unsigned long diva = (pllar & AT91_PMC_DIV); -+ *pfreq = (diva != 0) ? ((main_clock / diva) * ++mula) : 0; -+ } -+ -+ if(AT91_PMC_CSS_PLLB == tmode) { -+ unsigned long pllbr = at91_sys_read(AT91_CKGR_PLLBR); -+ unsigned long mulb = (pllbr & AT91_PMC_MUL) >> 16; -+ unsigned long divb = (pllbr & AT91_PMC_DIV); -+ -+ *pfreq = (divb != 0) ? ((main_clock / divb) * ++mulb) : 0; -+ } -+ -+ /* If the mode selected is different of -+ * _GNAM_SYS_FREQ or AT91_PROC_FREQ -+ * all is done and frequency can be returned. -+ */ -+ if((AT91_SYS_FREQ != mode) & (AT91_PROC_FREQ != mode)) -+ return 0; -+ -+ /* Here it divides the frequency -+ * by the prescaler factor -+ */ -+ *pfreq = *pfreq >> clkpre; -+ -+ /* If the selected frequency is AT91_SYS_FREQ -+ * then it must be selected by the clkdiv factor -+ */ -+ if(AT91_SYS_FREQ == mode) -+ *pfreq = *pfreq >> clkdiv; -+ -+ return 0; -+} -+ -+ -+/* nothing really to do with interrupts, just starts up a counter. */ -+int timer_init(void) -+{ -+ /* -+ * Enable PITC Clock -+ * The clock is already enabled for system controller in boot -+ */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -+ -+ /* Enable PITC */ -+ at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN); -+ -+ reset_timer_masked(); -+ -+ return 0; -+} -+ -+/* -+ * timer without interrupts -+ */ -+ -+static inline ulong get_timer_raw(void) -+{ -+ ulong now = READ_TIMER; -+ -+ if (now >= resettime) -+ return now - resettime; -+ else -+ return 0xFFFFFFFFUL - (resettime - now) ; -+} -+ -+void reset_timer_masked(void) -+{ -+ resettime = READ_TIMER; -+} -+ -+ulong get_timer_masked(void) -+{ -+ return TICKS_TO_USEC(get_timer_raw()); -+ -+} -+ -+void udelay_masked(unsigned long usec) -+{ -+ ulong tmp; -+ -+ tmp = get_timer(0); -+ while (get_timer(tmp) < usec) /* our timer works in usecs */ -+ ; /* NOP */ -+} -+ -+void reset_timer(void) -+{ -+ reset_timer_masked(); -+} -+ -+ulong get_timer(ulong base) -+{ -+ ulong now = get_timer_masked(); -+ -+ if (now >= base) -+ return now - base; -+ else -+ return TICKS_TO_USEC(0xFFFFFFFFUL) - (base - now) ; -+} -+ -+void udelay(unsigned long usec) -+{ -+ udelay_masked(usec); -+} -+ -+/* -+ * This function is derived from PowerPC code (read timebase as long long). -+ * On ARM it just returns the timer value. -+ */ -+unsigned long long get_ticks(void) -+{ -+ return get_timer(0); -+} -+ -+/* -+ * This function is derived from PowerPC code (timebase clock frequency). -+ * On ARM it returns the number of timer ticks per second. -+ */ -+ulong get_tbclk(void) -+{ -+ ulong tbclk; -+ -+ tbclk = CONFIG_SYS_HZ; -+ return tbclk; -+} -+ -+/* -+ * Reset the cpu by setting up the watchdog timer and let him time out. -+ */ -+void reset_cpu(ulong ignored) -+{ -+ /* at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | (0x3u << 8) | 0x01); */ -+ -+ /* -+ * ARC: -+ * This code must be executed in internal RAM -+ * cause the SDRAM is under reset -+ */ -+ -+ /* -+ * ARC: -+ * Reset SDRAM in safe way -+ */ -+ unsigned long reg = at91_sys_read(AT91_SDRAMC_LPR); -+ at91_sys_write(AT91_SDRAMC_LPR, reg | AT91_SDRAMC_LPCB_SELF_REFRESH); -+ at91_sys_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL); -+ *(volatile unsigned long *) AT572D940_SDRAM_BASE = 0x0; -+ -+ /* -+ * ARC -+ * Waits until the reset button has been released. -+ * Unusefull if checked previously. -+ */ -+ -+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); -+ -+ -+ while(!(at91_sys_read(AT91_RSTC_SR) & (1<<16))); -+ -+ { -+ /* -+ * ARC: -+ * i should be register cause SDRAM has been reset -+ */ -+ volatile register unsigned int i = 1000000; -+ while(i-->0); -+ }; -+ -+ -+ /* this is the way Linux does it */ -+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | -+ AT91_RSTC_PROCRST | -+ /* AT91_RSTC_EXTRST */ -+ AT91_RSTC_PERRST); -+ return; -+ while (1); -+ /* Never reached */ -+} -+ -diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/usb.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/usb.c ---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/usb.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/usb.c 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,55 @@ -+/* -+ * (C) Copyright 2006 -+ * DENX Software Engineering denx.de> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+ -+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) -+ -+#include -+#include -+#include -+ -+int usb_cpu_init(void) -+{ -+ /* Enable USB host clock. */ -+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); -+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); -+ -+ return 0; -+} -+ -+int usb_cpu_stop(void) -+{ -+ /* Disable USB host clock. */ -+ at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); -+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); -+ return 0; -+} -+ -+int usb_cpu_init_fail(void) -+{ -+ return usb_cpu_stop(); -+} -+ -+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,148 @@ -+/* -+ * include/asm-arm/arch-at91/AT572D940HFhf.h -+ * -+ * (C) 2008 Antonio R. Costa -+ * -+ * Common definitions. -+ * Based on AT572D940HFHF datasheet rev A. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT572D940HFHF_H -+#define AT572D940HFHF_H -+ -+/* -+ * Peripheral identifiers/interrupts. -+ */ -+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -+#define AT91_ID_SYS 1 /* System Peripherals */ -+#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -+#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -+#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -+#define AT572D940HF_ID_EMAC 5 /* Ethernet */ -+#define AT572D940HF_ID_US0 6 /* USART 0 */ -+#define AT572D940HF_ID_US1 7 /* USART 1 */ -+#define AT572D940HF_ID_US2 8 /* USART 2 */ -+#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -+#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -+#define AT572D940HF_ID_TWI 11 /* Two-Wire Interface */ -+#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface */ -+#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -+#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -+#define AT572D940HF_ID_SSC 14 /* Serial Synchronous Controller */ -+#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller */ -+#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller */ -+#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller */ -+#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -+#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -+#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -+#define AT572D940HF_ID_UHP 20 /* USB Host port */ -+#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller */ -+#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface */ -+#define AT572D940HF_ID_CAN0 23 /* CAN Controller */ -+#define AT572D940HF_ID_CAN1 24 /* CAN Controller */ -+#define AT572D940HF_ID_mHALT 25 /* mAgicV DSP halt int */ -+#define AT572D940HF_ID_mSIRQ1 26 /* mAgicV DSP SIRQ1 int */ -+#define AT572D940HF_ID_mEXC 27 /* mAgicV DSP Exception int */ -+#define AT572D940HF_ID_mEDMA 28 /* mAgicV DSP end of DMA transfer int */ -+#define AT572D940HF_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -+#define AT572D940HF_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -+#define AT572D940HF_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ -+ -+#define AT91_ID_US0 AT572D940HF_ID_US0 -+#define AT91_ID_US1 AT572D940HF_ID_US1 -+#define AT91_ID_US2 AT572D940HF_ID_US2 -+#define AT91_ID_US3 AT572D940HF_ID_US3 -+ -+#define AT91_ID_UHP AT572D940HF_ID_UHP -+#define AT91_PMC_UHP AT572D940HF_ID_UHP -+ -+/* -+ * User Peripheral physical base addresses. -+ */ -+#define AT572D940HF_BASE_TCB0 0xfffa0000 -+#define AT572D940HF_BASE_TC0 0xfffa0000 -+#define AT572D940HF_BASE_TC1 0xfffa0040 -+#define AT572D940HF_BASE_TC2 0xfffa0080 -+#define AT572D940HF_BASE_UDP 0xfffa4000 -+#define AT572D940HF_BASE_MCI 0xfffa8000 -+#define AT572D940HF_BASE_TWI 0xfffac000 -+#define AT572D940HF_BASE_US0 0xfffb0000 -+#define AT572D940HF_BASE_US1 0xfffb4000 -+#define AT572D940HF_BASE_US2 0xfffb8000 -+#define AT572D940HF_BASE_SSC 0xfffbc000 -+#define AT572D940HF_BASE_ISI 0xfffc0000 -+#define AT572D940HF_BASE_EMAC 0xfffd8000 -+#define AT572D940HF_BASE_SPI0 0xfffc8000 -+#define AT572D940HF_BASE_SPI1 0xfffcc000 -+#define AT572D940HF_BASE_US3 0xfffd0000 -+#define AT572D940HF_BASE_US4 0xfffd4000 -+#define AT572D940HF_BASE_US5 0xfffd8000 -+#define AT572D940HF_BASE_TCB1 0xfffdc000 -+#define AT572D940HF_BASE_TC3 0xfffdc000 -+#define AT572D940HF_BASE_TC4 0xfffdc040 -+#define AT572D940HF_BASE_TC5 0xfffdc080 -+#define AT572D940HF_BASE_ADC 0xfffe0000 -+#define AT572D940HF_BASE_RSTC 0xfffffd00 -+#define AT91_BASE_SYS 0xffffea00 -+ -+#define AT91_BASE_EMAC AT572D940HF_BASE_EMAC -+#define AT91_BASE_SPI AT572D940HF_BASE_SPI0 -+#define MMCI_BASE AT572D940HF_BASE_MCI -+ -+/* -+ * System Peripherals (offset from AT91_BASE_SYS) -+ */ -+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) -+ -+#define AT91_USART0 AT572D940HF_BASE_US0 -+#define AT91_USART1 AT572D940HF_BASE_US1 -+#define AT91_USART2 AT572D940HF_BASE_US2 -+#define AT91_USART3 AT572D940HF_BASE_US3 -+#define AT91_USART4 AT572D940HF_BASE_US4 -+#define AT91_USART5 AT572D940HF_BASE_US5 -+ -+/* -+ * Internal Memory. -+ */ -+#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -+#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ -+ -+#define AT572D940HF_SRAM0_BASE 0x00100000 /* Internal SRAM 0 base address */ -+#define AT572D940HF_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (4Kb) */ -+#define AT572D940HF_SRAM1_BASE 0x00200000 /* Internal SRAM 0 base address */ -+#define AT572D940HF_SRAM1_SIZE SZ_16K /* Internal SRAM 0 size (4Kb) */ -+#define AT572D940HF_SRAM2_BASE 0x00300000 /* Internal SRAM 1 base address */ -+#define AT572D940HF_SRAM2_SIZE SZ_16K /* Internal SRAM 1 size (4Kb) */ -+ -+/* SDRAM */ -+#define AT572D940HF_SDRAM_BASE 0x20000000 -+ -+/* USB Host */ -+#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ -+ -+#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ -+#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,78 @@ -+/* -+ * include/asm-arm/arch-at91/at91sam9260_matrix.h -+ * -+ * Memory Controllers (MATRIX, EBI) - System peripherals registers. -+ * Based on AT91SAM9260 datasheet revision B. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91SAM9260_MATRIX_H -+#define AT91SAM9260_MATRIX_H -+ -+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -+#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -+#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -+#define AT91_MATRIX_ULBT_FOUR (2 << 0) -+#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -+ -+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -+ -+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -+ -+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -+ -+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -+#define AT91_MATRIX_CS1A_SMC (0 << 1) -+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -+#define AT91_MATRIX_CS3A_SMC (0 << 3) -+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -+#define AT91_MATRIX_CS4A_SMC (0 << 4) -+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -+#define AT91_MATRIX_CS5A_SMC (0 << 5) -+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) -+ -+#endif -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_mc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_mc.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_mc.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_mc.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,140 @@ -+/* -+ * include/asm-arm/arch-at91/at91sam926x_mc.h -+ * -+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers. -+ * Based on AT91SAM9261 datasheet revision D. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+*/ -+ -+#ifndef AT91SAM926x_MC_H -+#define AT91SAM926x_MC_H -+ -+/* SDRAM Controller (SDRAMC) registers */ -+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ -+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -+#define AT91_SDRAMC_MODE_NORMAL 0 -+#define AT91_SDRAMC_MODE_NOP 1 -+#define AT91_SDRAMC_MODE_PRECHARGE 2 -+#define AT91_SDRAMC_MODE_LMR 3 -+#define AT91_SDRAMC_MODE_REFRESH 4 -+#define AT91_SDRAMC_MODE_EXT_LMR 5 -+#define AT91_SDRAMC_MODE_DEEP 6 -+ -+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ -+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -+ -+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ -+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -+#define AT91_SDRAMC_NC_8 (0 << 0) -+#define AT91_SDRAMC_NC_9 (1 << 0) -+#define AT91_SDRAMC_NC_10 (2 << 0) -+#define AT91_SDRAMC_NC_11 (3 << 0) -+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -+#define AT91_SDRAMC_NR_11 (0 << 2) -+#define AT91_SDRAMC_NR_12 (1 << 2) -+#define AT91_SDRAMC_NR_13 (2 << 2) -+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -+#define AT91_SDRAMC_NB_2 (0 << 4) -+#define AT91_SDRAMC_NB_4 (1 << 4) -+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -+#define AT91_SDRAMC_CAS_1 (1 << 5) -+#define AT91_SDRAMC_CAS_2 (2 << 5) -+#define AT91_SDRAMC_CAS_3 (3 << 5) -+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -+#define AT91_SDRAMC_DBW_32 (0 << 7) -+#define AT91_SDRAMC_DBW_16 (1 << 7) -+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ -+ -+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ -+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -+#define AT91_SDRAMC_LPCB_DISABLE 0 -+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -+#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ -+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) -+ -+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ -+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ -+ -+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ -+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -+#define AT91_SDRAMC_MD_SDRAM 0 -+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -+ -+/* Static Memory Controller (SMC) registers */ -+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10))/* Setup Register for CS n */ -+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -+#define AT91_SMC_NWESETUP_(x) ((x) << 0) -+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -+#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) -+ -+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10))/* Pulse Register for CS n */ -+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -+#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -+#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) -+ -+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10))/* Cycle Register for CS n */ -+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -+#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) -+ -+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -+#define AT91_SMC_EXNWMODE_READY (3 << 4) -+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -+#define AT91_SMC_BAT_SELECT (0 << 8) -+#define AT91_SMC_BAT_WRITE (1 << 8) -+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -+#define AT91_SMC_DBW_8 (0 << 12) -+#define AT91_SMC_DBW_16 (1 << 12) -+#define AT91_SMC_DBW_32 (2 << 12) -+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -+#define AT91_SMC_TDF_(x) ((x) << 16) -+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -+#define AT91_SMC_PS (3 << 28) /* Page Size */ -+#define AT91_SMC_PS_4 (0 << 28) -+#define AT91_SMC_PS_8 (1 << 28) -+#define AT91_SMC_PS_16 (2 << 28) -+#define AT91_SMC_PS_32 (3 << 28) -+ -+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -+#endif -+ -+#endif -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_aic.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_aic.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_aic.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_aic.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,43 @@ -+/* -+ * include/asm-arm/arch-at572d940/at91_aic.h -+ * -+ * Copyright (C) ATMEL -+ * -+ * Advanced Interrupt Controller (AIC). -+ * Based on AT572D940 datasheet. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#define AIC_BASE 0xfffff000 -+ -+#define AIC_SMR0 0x0 -+#define AIC_SVR0 0x80 -+#define AIC_IVR 0x100 -+#define AIC_FIQ 0x104 -+#define AIC_ISR 0x108 -+#define AIC_IPR 0x10c -+#define AIC_IMR 0x110 -+#define AIC_ICR 0x114 -+#define AIC_IECR 0x120 -+#define AIC_IDCR 0x124 -+#define AIC_ICCR 0x128 -+#define AIC_ISCR 0x12c -+#define AIC_EOICR 0x130 -+#define AIC_SPU 0x134 -+ -+#define AIC_SMR(n) \ -+ ((unsigned long) (((unsigned long*) AIC_SMR0) + (n))) -+#define AIC_SVR(n) \ -+ ((unsigned long) (((unsigned long*) AIC_SVR0) + (n))) -+ -+#define AIC_WRITE(reg,value) \ -+ (*((volatile unsigned long*) (AIC_BASE + (reg))) = value) -+#define AIC_READ(reg,value) \ -+ (value = *((volatile unsigned long*) (AIC_BASE + (reg)))) -+ -+#define AIC_REG(reg) \ -+ (*((volatile unsigned long*) (AIC_BASE + (reg)))) -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pio.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pio.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pio.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pio.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,52 @@ -+/* -+ * include/asm-arm/arch-at91/at91_pio.h -+ * -+ * Copyright (C) 2005 Ivan Kokshaysky -+ * Copyright (C) SAN People -+ * -+ * Parallel I/O Controller (PIO) - System peripherals registers. -+ * Based on AT91RM9200 datasheet revision E. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91_PIO_H -+#define AT91_PIO_H -+ -+#include -+ -+#define PIO_PER 0x00 /* Enable Register */ -+#define PIO_PDR 0x04 /* Disable Register */ -+#define PIO_PSR 0x08 /* Status Register */ -+#define PIO_OER 0x10 /* Output Enable Register */ -+#define PIO_ODR 0x14 /* Output Disable Register */ -+#define PIO_OSR 0x18 /* Output Status Register */ -+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -+#define PIO_SODR 0x30 /* Set Output Data Register */ -+#define PIO_CODR 0x34 /* Clear Output Data Register */ -+#define PIO_ODSR 0x38 /* Output Data Status Register */ -+#define PIO_PDSR 0x3c /* Pin Data Status Register */ -+#define PIO_IER 0x40 /* Interrupt Enable Register */ -+#define PIO_IDR 0x44 /* Interrupt Disable Register */ -+#define PIO_IMR 0x48 /* Interrupt Mask Register */ -+#define PIO_ISR 0x4c /* Interrupt Status Register */ -+#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -+#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -+#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -+#define PIO_PUER 0x64 /* Pull-up Enable Register */ -+#define PIO_PUSR 0x68 /* Pull-up Status Register */ -+#define PIO_ASR 0x70 /* Peripheral A Select Register */ -+#define PIO_BSR 0x74 /* Peripheral B Select Register */ -+#define PIO_ABSR 0x78 /* AB Status Register */ -+#define PIO_OWER 0xa0 /* Output Write Enable Register */ -+#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -+#define PIO_OWSR 0xa8 /* Output Write Status Register */ -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pit.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pit.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pit.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pit.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,29 @@ -+/* -+ * include/asm-arm/arch-at91/at91_pit.h -+ * -+ * Periodic Interval Timer (PIT) - System peripherals regsters. -+ * Based on AT91SAM9261 datasheet revision D. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91_PIT_H -+#define AT91_PIT_H -+ -+#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ -+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ -+ -+#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ -+#define AT91_PIT_PITS (1 << 0) /* Timer Status */ -+ -+#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ -+#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ -+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ -+ -+#endif -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pmc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pmc.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pmc.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pmc.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,102 @@ -+/* -+ * include/asm-arm/arch-at91/at91_pmc.h -+ * -+ * Copyright (C) 2005 Ivan Kokshaysky -+ * Copyright (C) SAN People -+ * -+ * Power Management Controller (PMC) - System peripherals registers. -+ * Based on AT91RM9200 datasheet revision E. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91_PMC_H -+#define AT91_PMC_H -+ -+#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ -+#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ -+ -+#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ -+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ -+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ -+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ -+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ -+#define AT572D940HF_PMC_UHP (1 << 6) /* USB Host Port Clock [AT572D940HF] */ -+#define AT572D940HF_PMC_UDP (1 << 7) /* USB Device Port Clock [AT572D940HF] */ -+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Decice Port Clock [AT91SAM926x only] */ -+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ -+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ -+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ -+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ -+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ -+ -+#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ -+#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ -+#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -+ -+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ -+ -+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ -+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ -+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ -+ -+#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ -+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ -+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ -+ -+#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ -+#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ -+#define AT91_PMC_DIV (0xff << 0) /* Divider */ -+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ -+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ -+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ -+#define AT91_PMC_USBDIV_1 (0 << 28) -+#define AT91_PMC_USBDIV_2 (1 << 28) -+#define AT91_PMC_USBDIV_4 (2 << 28) -+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ -+ -+#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ -+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ -+#define AT91_PMC_CSS_SLOW (0 << 0) -+#define AT91_PMC_CSS_MAIN (1 << 0) -+#define AT91_PMC_CSS_PLLA (2 << 0) -+#define AT91_PMC_CSS_PLLB (3 << 0) -+#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -+#define AT91_PMC_PRES_1 (0 << 2) -+#define AT91_PMC_PRES_2 (1 << 2) -+#define AT91_PMC_PRES_4 (2 << 2) -+#define AT91_PMC_PRES_8 (3 << 2) -+#define AT91_PMC_PRES_16 (4 << 2) -+#define AT91_PMC_PRES_32 (5 << 2) -+#define AT91_PMC_PRES_64 (6 << 2) -+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -+#define AT91_PMC_MDIV_1 (0 << 8) -+#define AT91_PMC_MDIV_2 (1 << 8) -+#define AT91_PMC_MDIV_3 (2 << 8) -+#define AT91_PMC_MDIV_4 (3 << 8) -+ -+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ -+ -+#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ -+#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ -+#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ -+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ -+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ -+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ -+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ -+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ -+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -+#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_rstc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_rstc.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_rstc.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_rstc.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,38 @@ -+/* -+ * include/asm-arm/arch-at91/at91_rstc.h -+ * -+ * Reset Controller (RSTC) - System peripherals regsters. -+ * Based on AT91SAM9261 datasheet revision D. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91_RSTC_H -+#define AT91_RSTC_H -+ -+#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ -+#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ -+#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ -+#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ -+ -+#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ -+#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ -+#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ -+#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) -+#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) -+#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) -+#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) -+#define AT91_RSTC_RSTTYP_USER (4 << 8) -+#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ -+#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ -+ -+#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ -+#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ -+#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ -+#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ -+ -+#endif -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_spi.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_spi.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_spi.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_spi.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,106 @@ -+/* -+ * include/asm-arm/arch-at91/at91_spi.h -+ * -+ * Copyright (C) 2005 Ivan Kokshaysky -+ * Copyright (C) SAN People -+ * -+ * Serial Peripheral Interface (SPI) registers. -+ * Based on AT91RM9200 datasheet revision E. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91_SPI_H -+#define AT91_SPI_H -+ -+#define AT91_SPI_CR 0x00 /* Control Register */ -+#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -+#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -+#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ -+ -+#define AT91_SPI_MR 0x04 /* Mode Register */ -+#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -+#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -+#define AT91_SPI_PS_FIXED (0 << 1) -+#define AT91_SPI_PS_VARIABLE (1 << 1) -+#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -+#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -+#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -+#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -+#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ -+ -+#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -+#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -+ -+#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -+#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ -+ -+#define AT91_SPI_SR 0x10 /* Status Register */ -+#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -+#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -+#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -+#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -+#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -+#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -+#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -+#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -+#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -+#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -+#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ -+ -+#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -+#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -+#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ -+ -+#define AT91_SPI_CSR(n) (0x30 + ((n) * 4))/* Chip Select Registers 0-3 */ -+#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -+#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -+#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -+#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -+#define AT91_SPI_BITS_8 (0 << 4) -+#define AT91_SPI_BITS_9 (1 << 4) -+#define AT91_SPI_BITS_10 (2 << 4) -+#define AT91_SPI_BITS_11 (3 << 4) -+#define AT91_SPI_BITS_12 (4 << 4) -+#define AT91_SPI_BITS_13 (5 << 4) -+#define AT91_SPI_BITS_14 (6 << 4) -+#define AT91_SPI_BITS_15 (7 << 4) -+#define AT91_SPI_BITS_16 (8 << 4) -+#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -+#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -+#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ -+ -+#define AT91_SPI_RPR 0x0100 /* Receive Pointer Register */ -+ -+#define AT91_SPI_RCR 0x0104 /* Receive Counter Register */ -+ -+#define AT91_SPI_TPR 0x0108 /* Transmit Pointer Register */ -+ -+#define AT91_SPI_TCR 0x010c /* Transmit Counter Register */ -+ -+#define AT91_SPI_RNPR 0x0110 /* Receive Next Pointer Register */ -+ -+#define AT91_SPI_RNCR 0x0114 /* Receive Next Counter Register */ -+ -+#define AT91_SPI_TNPR 0x0118 /* Transmit Next Pointer Register */ -+ -+#define AT91_SPI_TNCR 0x011c /* Transmit Next Counter Register */ -+ -+#define AT91_SPI_PTCR 0x0120 /* PDC Transfer Control Register */ -+#define AT91_SPI_RXTEN (0x1 << 0) /* Receiver Transfer Enable */ -+#define AT91_SPI_RXTDIS (0x1 << 1) /* Receiver Transfer Disable */ -+#define AT91_SPI_TXTEN (0x1 << 8) /* Transmitter Transfer Enable */ -+#define AT91_SPI_TXTDIS (0x1 << 9) /* Transmitter Transfer Disable */ -+ -+#define AT91_SPI_PTSR 0x0124 /* PDC Transfer Status Register */ -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/clk.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/clk.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/clk.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/clk.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,45 @@ -+/* -+ * (C) Copyright 2007 -+ * Stelian Pop leadtechdesign.com> -+ * Lead Tech Design -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARM_ARCH_CLK_H__ -+#define __ASM_ARM_ARCH_CLK_H__ -+ -+#include -+ -+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) -+{ -+ return AT91_MASTER_CLOCK; -+} -+ -+static inline unsigned long get_usart_clk_rate(unsigned int dev_id) -+{ -+ return AT91_MASTER_CLOCK; -+} -+ -+static inline unsigned long get_mci_clk_rate(void) -+{ -+ return AT91_MASTER_CLOCK; -+} -+ -+#endif /* __ASM_ARM_ARCH_CLK_H__ */ -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/gpio.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/gpio.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/gpio.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,367 @@ -+/* -+ * include/asm-arm/arch-at91/gpio.h -+ * -+ * Copyright (C) 2005 HP Labs -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#ifndef __ASM_ARCH_AT91_GPIO_H -+#define __ASM_ARCH_AT91_GPIO_H -+ -+#include -+#include -+#include -+ -+#define PIN_BASE 32 -+ -+#define MAX_GPIO_BANKS 5 -+ -+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ -+ -+#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) -+#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) -+#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) -+#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) -+#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) -+#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) -+#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) -+#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) -+#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) -+#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) -+#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) -+#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) -+#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) -+#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) -+#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) -+#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) -+#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) -+#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) -+#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) -+#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) -+#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) -+#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) -+#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) -+#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) -+#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) -+#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) -+#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) -+#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) -+#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) -+#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) -+#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) -+#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) -+ -+#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) -+#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) -+#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) -+#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) -+#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) -+#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) -+#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) -+#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) -+#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) -+#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) -+#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) -+#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) -+#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) -+#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) -+#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) -+#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) -+#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) -+#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) -+#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) -+#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) -+#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) -+#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) -+#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) -+#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) -+#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) -+#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) -+#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) -+#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) -+#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) -+#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) -+#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) -+#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) -+ -+#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) -+#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) -+#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) -+#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) -+#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) -+#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) -+#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) -+#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) -+#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) -+#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) -+#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) -+#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) -+#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) -+#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) -+#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) -+#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) -+#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) -+#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) -+#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) -+#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) -+#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) -+#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) -+#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) -+#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) -+#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) -+#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) -+#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) -+#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) -+#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) -+#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) -+#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) -+#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) -+ -+#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) -+#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) -+#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) -+#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) -+#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) -+#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) -+#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) -+#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) -+#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) -+#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) -+#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) -+#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) -+#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) -+#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) -+#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) -+#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) -+#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) -+#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) -+#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) -+#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) -+#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) -+#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) -+#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) -+#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) -+#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) -+#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) -+#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) -+#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) -+#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) -+#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) -+#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) -+#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) -+ -+#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) -+#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) -+#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) -+#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) -+#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) -+#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) -+#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) -+#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) -+#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) -+#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) -+#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) -+#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) -+#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) -+#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) -+#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) -+#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) -+#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) -+#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) -+#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) -+#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) -+#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) -+#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) -+#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) -+#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) -+#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) -+#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) -+#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) -+#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) -+#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) -+#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) -+#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) -+#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) -+ -+static unsigned long at91_pios[] = { -+ AT91_PIOA, -+ AT91_PIOB, -+ AT91_PIOC, -+#ifdef AT91_PIOD -+ AT91_PIOD, -+#ifdef AT91_PIOE -+ AT91_PIOE -+#endif -+#endif -+}; -+ -+static inline void *pin_to_controller(unsigned pin) -+{ -+ pin -= PIN_BASE; -+ pin /= 32; -+ return (void *)(AT91_BASE_SYS + at91_pios[pin]); -+} -+ -+static inline unsigned pin_to_mask(unsigned pin) -+{ -+ pin -= PIN_BASE; -+ return 1 << (pin % 32); -+} -+ -+/* -+ * mux the pin to the "GPIO" peripheral role. -+ */ -+static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + PIO_IDR); -+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); -+ __raw_writel(mask, pio + PIO_PER); -+ return 0; -+} -+ -+/* -+ * mux the pin to the "A" internal peripheral role. -+ */ -+static inline int at91_set_A_periph(unsigned pin, int use_pullup) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + PIO_IDR); -+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); -+ __raw_writel(mask, pio + PIO_ASR); -+ __raw_writel(mask, pio + PIO_PDR); -+ return 0; -+} -+ -+/* -+ * mux the pin to the "B" internal peripheral role. -+ */ -+static inline int at91_set_B_periph(unsigned pin, int use_pullup) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + PIO_IDR); -+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); -+ __raw_writel(mask, pio + PIO_BSR); -+ __raw_writel(mask, pio + PIO_PDR); -+ return 0; -+} -+ -+/* -+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and -+ * configure it for an input. -+ */ -+static inline int at91_set_gpio_input(unsigned pin, int use_pullup) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + PIO_IDR); -+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); -+ __raw_writel(mask, pio + PIO_ODR); -+ __raw_writel(mask, pio + PIO_PER); -+ return 0; -+} -+ -+/* -+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), -+ * and configure it for an output. -+ */ -+static inline int at91_set_gpio_output(unsigned pin, int value) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + PIO_IDR); -+ __raw_writel(mask, pio + PIO_PUDR); -+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); -+ __raw_writel(mask, pio + PIO_OER); -+ __raw_writel(mask, pio + PIO_PER); -+ return 0; -+} -+ -+/* -+ * enable/disable the glitch filter; mostly used with IRQ handling. -+ */ -+static inline int at91_set_deglitch(unsigned pin, int is_on) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); -+ return 0; -+} -+ -+/* -+ * enable/disable the multi-driver; This is only valid for output and -+ * allows the output pin to run as an open collector output. -+ */ -+static inline int at91_set_multi_drive(unsigned pin, int is_on) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); -+ return 0; -+} -+ -+static inline int gpio_direction_input(unsigned pin) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ if (!(__raw_readl(pio + PIO_PSR) & mask)) -+ return -EINVAL; -+ __raw_writel(mask, pio + PIO_ODR); -+ return 0; -+} -+ -+static inline int gpio_direction_output(unsigned pin, int value) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ if (!(__raw_readl(pio + PIO_PSR) & mask)) -+ return -EINVAL; -+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); -+ __raw_writel(mask, pio + PIO_OER); -+ return 0; -+} -+ -+/* -+ * assuming the pin is muxed as a gpio output, set its value. -+ */ -+static inline int at91_set_gpio_value(unsigned pin, int value) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); -+ return 0; -+} -+ -+/* -+ * read the pin's value (works even if it's not muxed as a gpio). -+ */ -+static inline int at91_get_gpio_value(unsigned pin) -+{ -+ void *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ u32 pdsr; -+ -+ pdsr = __raw_readl(pio + PIO_PDSR); -+ return (pdsr & mask) != 0; -+} -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/hardware.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/hardware.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/hardware.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/hardware.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,37 @@ -+/* -+ * include/asm-arm/arch-at91/hardware.h -+ * -+ * Copyright (C) 2003 SAN People -+ * Copyright (C) 2003 ATMEL -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#ifndef __ASM_ARCH_HARDWARE_H -+#define __ASM_ARCH_HARDWARE_H -+ -+#include -+ -+#if defined(CONFIG_AT572D940HF) -+#include -+#else -+#error "Unsupported AT572D940HF processor" -+#endif -+ -+/* -+ * container_of - cast a member of a structure out to the containing structure -+ * -+ * @ptr: the pointer to the member. -+ * @type: the type of the container struct this is embedded in. -+ * @member: the name of the member within the struct. -+ */ -+#define container_of(ptr, type, member) ({ \ -+ const typeof(((type *)0)->member) *__mptr = (ptr); \ -+ (type *)((char *)__mptr - offsetof(type, member)); }) -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/interrupts.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/interrupts.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/interrupts.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/interrupts.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,40 @@ -+/* -+ * include/asm-arm/arch-at572d940/at91_aic.h -+ * -+ * Copyright (C) 2008 Antonio R. Costa -+ * Copyright (C) ATMEL -+ * -+ * Advanced Interrupt Controller (AIC). -+ * Based on AT572D940 datasheet. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef __AT572D940_INTERRUPTS_H__ -+#define __AT572D940_INTERRUPTS_H__ -+ -+#include -+ -+typedef void (*irq_handler_t) (unsigned long int); -+ -+#define SET_IRQ_HANDLER(s,m,h) \ -+do { \ -+ AIC_WRITE(AIC_SMR(s),m); \ -+ AIC_WRITE(AIC_SVR(s),h); \ -+ AIC_WRITE(AIC_IECR,(1< -+ -+static inline unsigned int at91_sys_read(unsigned int reg_offset) -+{ -+ void *addr = (void *)AT91_BASE_SYS; -+ -+ return __raw_readl(addr + reg_offset); -+} -+ -+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) -+{ -+ void *addr = (void *)AT91_BASE_SYS; -+ -+ __raw_writel(value, addr + reg_offset); -+} -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/memory-map.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/memory-map.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/memory-map.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/memory-map.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,37 @@ -+/* -+ * (C) Copyright 2007-2008 -+ * Stelian Pop leadtechdesign.com> -+ * Lead Tech Design -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARM_ARCH_MEMORYMAP_H__ -+#define __ASM_ARM_ARCH_MEMORYMAP_H__ -+ -+#include -+ -+#define USART0_BASE AT91_USART0 -+#define USART1_BASE AT91_USART1 -+#define USART2_BASE AT91_USART2 -+#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) -+ -+#define AT572D940_SDRAM_BASE 0x20000000 -+ -+#endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */ -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/mmc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/mmc.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/mmc.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/mmc.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,355 @@ -+/* -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * Antonio R. Costa atmel.com> -+ * gmail.com> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __ASM_AT572D940_MMC_H -+#define __ASM_AT572D940_MMC_H -+ -+struct mmc_cid { -+ unsigned long psn; -+ unsigned short oid; -+ unsigned char mid; -+ unsigned char prv; -+ unsigned char mdt; -+ char pnm[7]; -+}; -+ -+/* -+ * Bitfileds are ugly and not portable, -+ * So lets redefine the CSD -+ */ -+ -+typedef unsigned long mmc_csd_t[4]; -+typedef unsigned long sd_csd_t[4]; -+ -+/* -+ * CSD ver: 2.0 manipulation macros -+ */ -+ -+/* -+ * Masks -+ */ -+ -+#define CSD_2x_VER_MASK 0x3 -+#define CSD_2x_RSVD1_MASK 0x3f -+#define CSD_2x_TAAC_MASK 0xff -+#define CSD_2x_NSAC_MASK 0xff -+#define CSD_2x_TRANSPEED_MASK 0xff -+ -+#define CSD_2x_CCC_MASK 0xfff -+#define CSD_2x_RBLEN_MASK 0xff -+#define CSD_2x_RBP_MASK 0x1 -+#define CSD_2x_WBM_MASK 0x1 -+#define CSD_2x_RBM_MASK 0x1 -+#define CSD_2x_DSRIMP_MASK 0x1 -+#define CSD_2x_RSVD2_MASK 0x3f -+#define CSD_2x_CSIZE_H_MASK 0x3f -+ -+#define CSD_2x_CSIZE_MASK 0xffff -+#define CSD_2x_RSVD3_MASK 0x1 -+#define CSD_2x_ERBL_MASK 0x1 -+#define CSD_2x_SECSIZE_MASK 0x7f -+#define CSD_2x_WPGS_MASK 0x7f -+ -+#define CSD_2x_WPGE_MASK 0x1 -+#define CSD_2x_RSVD4_MASK 0x3 -+#define CSD_2x_R2WF_MASK 0x7 -+#define CSD_2x_WBL_MASK 0xf -+#define CSD_2x_WBP_MASK 0x1 -+#define CSD_2x_RSVD5_MASK 0x1f -+#define CSD_2x_FFG_MASK 0x1 -+#define CSD_2x_COPY_MASK 0x1 -+#define CSD_2x_PWP_MASK 0x1 -+#define CSD_2x_TWP_MASK 0x1 -+#define CSD_2x_FF_MASK 0x3 -+#define CSD_2x_RSVD6_MASK 0x3 -+#define CSD_2x_CRC_MASK 0x7f -+#define CSD_2x_ONE_MASK 0x1 -+ -+/* -+ * Offsets inside the single word -+ */ -+ -+#define CSD_2x_VER_OFF 30 -+#define CSD_2x_RSVD1_OFF 24 -+#define CSD_2x_TAAC_OFF 16 -+#define CSD_2x_NSAC_OFF 8 -+#define CSD_2x_TRANSPEED_OFF 0 -+ -+#define CSD_2x_CCC_OFF 20 -+#define CSD_2x_RBLEN_OFF 16 -+#define CSD_2x_RBP_OFF 15 -+#define CSD_2x_WBM_OFF 14 -+#define CSD_2x_RBM_OFF 13 -+#define CSD_2x_DSRIMP_OFF 12 -+#define CSD_2x_RSVD2_OFF 6 -+#define CSD_2x_CSIZE_H_OFF 0 -+ -+#define CSD_2x_CSIZE_OFF 16 -+#define CSD_2x_RSVD3_OFF 15 -+#define CSD_2x_ERBL_OFF 14 -+#define CSD_2x_SECSIZE_OFF 7 -+#define CSD_2x_WPGS_OFF 0 -+ -+#define CSD_2x_WPGE_OFF 31 -+#define CSD_2x_RSVD4_OFF 29 -+#define CSD_2x_R2WF_OFF 26 -+#define CSD_2x_WBL_OFF 22 -+#define CSD_2x_WBP_OFF 21 -+#define CSD_2x_RSVD5_OFF 16 -+#define CSD_2x_FFG_OFF 15 -+#define CSD_2x_COPY_OFF 14 -+#define CSD_2x_PWP_OFF 13 -+#define CSD_2x_TWP_OFF 12 -+#define CSD_2x_FF_OFF 10 -+#define CSD_2x_RSVD6_OFF 8 -+#define CSD_2x_CRC_OFF 1 -+#define CSD_2x_ONE_OFF 0 -+ -+/* -+ * Word in which the field is placed -+ */ -+ -+#define CSD_2x_VER_W 0 -+#define CSD_2x_RSVD1_W 0 -+#define CSD_2x_TAAC_W 0 -+#define CSD_2x_NSAC_W 0 -+#define CSD_2x_TRANSPEED_W 0 -+ -+#define CSD_2x_CCC_W 1 -+#define CSD_2x_RBLEN_W 1 -+#define CSD_2x_RBP_W 1 -+#define CSD_2x_WBM_W 1 -+#define CSD_2x_RBM_W 1 -+#define CSD_2x_DSRIMP_W 1 -+#define CSD_2x_RSVD2_W 1 -+#define CSD_2x_CSIZE_H_W 1 -+ -+#define CSD_2x_CSIZE_W 2 -+#define CSD_2x_RSVD3_W 2 -+#define CSD_2x_ERBL_W 2 -+#define CSD_2x_SECSIZE_W 2 -+#define CSD_2x_WPGS_W 2 -+ -+#define CSD_2x_WPGE_W 3 -+#define CSD_2x_RSVD4_W 3 -+#define CSD_2x_R2WF_W 3 -+#define CSD_2x_WBL_W 3 -+#define CSD_2x_WBP_W 3 -+#define CSD_2x_RSVD5_W 3 -+#define CSD_2x_FFG_W 3 -+#define CSD_2x_COPY_W 3 -+#define CSD_2x_PWP_W 3 -+#define CSD_2x_TWP_W 3 -+#define CSD_2x_FF_W 3 -+#define CSD_2x_RSVD6_W 3 -+#define CSD_2x_CRC_W 3 -+#define CSD_2x_ONE_W 3 -+ -+/* -+ * ARC: -+ * Please note that CSIZE field crosses the word boundary, -+ * anyway since SD spec 2.0 states that the highest 6 bits -+ * shall be set to 0s the following macro still works -+ */ -+ -+#define SD_CSD_2x_CSIZE(pcsd) \ -+ (((unsigned long long) SD_CSD_2x_FIELD(CSIZE,pcsd)) | \ -+ (((unsigned long long) SD_CSD_2x_FIELD(CSIZE_H,pcsd)) << 16)) -+ -+#define SD_CSD_2x_FIELD(name,pcsd) \ -+ ((((unsigned long *)pcsd)[CSD_2x_## name ##_W] >> \ -+ CSD_2x_## name ##_OFF) & CSD_2x_## name ##_MASK) -+ -+#define CSD_1x_VER_MASK 0x3 -+#define CSD_1x_RSVD1_MASK 0x3f -+#define CSD_1x_TAAC_MASK 0xff -+#define CSD_1x_NSAC_MASK 0xff -+#define CSD_1x_TRANSPEED_MASK 0xff -+ -+#define CSD_1x_CCC_MASK 0xfff -+#define CSD_1x_RBLEN_MASK 0xf -+#define CSD_1x_RBP_MASK 0x1 -+#define CSD_1x_WBM_MASK 0x1 -+#define CSD_1x_RBM_MASK 0x1 -+#define CSD_1x_DSRIMP_MASK 0x1 -+#define CSD_1x_RSVD2_MASK 0x3 -+#define CSD_1x_CSIZE_H_MASK 0x3ff -+ -+#define CSD_1x_CSIZE_MASK 0x3 -+#define CSD_1x_RCMIN_MASK 0x7 -+#define CSD_1x_RCMAX_MASK 0x7 -+#define CSD_1x_WCMIN_MASK 0x7 -+#define CSD_1x_WCMAX_MASK 0x7 -+#define CSD_1x_CSMUL_MASK 0x7 -+#define CSD_1x_ESBE_MASK 0x1 -+#define CSD_1x_SEC_SIZE_MASK 0x7ff -+ -+#define CSD_1x_WPGS_MASK 0x7ff -+#define CSD_1x_WPGE_MASK 0x1 -+#define CSD_1x_RSVD4_MASK 0x3 -+#define CSD_1x_R2WF_MASK 0x7 -+#define CSD_1x_WBL_MASK 0xf -+#define CSD_1x_WBP_MASK 0x1 -+#define CSD_1x_RSVD5_MASK 0x1f -+#define CSD_1x_FFG_MASK 0x1 -+#define CSD_1x_COPY_MASK 0x1 -+#define CSD_1x_PWP_MASK 0x1 -+#define CSD_1x_TWP_MASK 0x1 -+#define CSD_1x_FF_MASK 0x3 -+#define CSD_1x_RSVD6_MASK 0x3 -+#define CSD_1x_CRC_MASK 0x7f -+#define CSD_1x_ONE_MASK 0x1 -+ -+/* -+ * Offsets inside the single word -+ */ -+ -+#define CSD_1x_VER_OFF 30 -+#define CSD_1x_RSVD1_OFF 24 -+#define CSD_1x_TAAC_OFF 16 -+#define CSD_1x_NSAC_OFF 8 -+#define CSD_1x_TRANSPEED_OFF 0 -+ -+#define CSD_1x_CCC_OFF 20 -+#define CSD_1x_RBLEN_OFF 16 -+#define CSD_1x_RBP_OFF 15 -+#define CSD_1x_WBM_OFF 14 -+#define CSD_1x_RBM_OFF 13 -+#define CSD_1x_DSRIMP_OFF 12 -+#define CSD_1x_RSVD2_OFF 10 -+#define CSD_1x_CSIZE_H_OFF 0 -+ -+#define CSD_1x_CSIZE_OFF 30 -+#define CSD_1x_RCMIN_OFF 27 -+#define CSD_1x_RCMAX_OFF 24 -+#define CSD_1x_WCMIN_OFF 21 -+#define CSD_1x_WCMAX_OFF 18 -+#define CSD_1x_CSMUL_OFF 15 -+#define CSD_1x_ERBL_OFF 14 -+#define CSD_1x_SECSIZE_OFF 7 -+#define CSD_1x_WPGS_OFF 0 -+ -+#define CSD_1x_WPGE_OFF 31 -+#define CSD_1x_RSVD4_OFF 29 -+#define CSD_1x_R2WF_OFF 26 -+#define CSD_1x_WBL_OFF 22 -+#define CSD_1x_WBP_OFF 21 -+#define CSD_1x_RSVD5_OFF 16 -+#define CSD_1x_FFG_OFF 15 -+#define CSD_1x_COPY_OFF 14 -+#define CSD_1x_PWP_OFF 13 -+#define CSD_1x_TWP_OFF 12 -+#define CSD_1x_FF_OFF 10 -+#define CSD_1x_RSVD6_OFF 8 -+#define CSD_1x_CRC_OFF 1 -+#define CSD_1x_ONE_OFF 0 -+ -+/* -+ * Word in which the field is placed -+ */ -+ -+#define CSD_1x_VER_W 0 -+#define CSD_1x_RSVD1_W 0 -+#define CSD_1x_TAAC_W 0 -+#define CSD_1x_NSAC_W 0 -+#define CSD_1x_TRANSPEED_W 0 -+ -+#define CSD_1x_CCC_W 1 -+#define CSD_1x_RBLEN_W 1 -+#define CSD_1x_RBP_W 1 -+#define CSD_1x_WBM_W 1 -+#define CSD_1x_RBM_W 1 -+#define CSD_1x_DSRIMP_W 1 -+#define CSD_1x_RSVD2_W 1 -+#define CSD_1x_CSIZE_H_W 1 -+ -+#define CSD_1x_CSIZE_W 2 -+#define CSD_1x_RCMIN_W 2 -+#define CSD_1x_RCMAX_W 2 -+#define CSD_1x_WCMIN_W 2 -+#define CSD_1x_WCMAX_W 2 -+#define CSD_1x_CSMUL_W 2 -+#define CSD_1x_ERBL_W 2 -+#define CSD_1x_SECSIZE_W 2 -+#define CSD_1x_WPGS_W 2 -+ -+#define CSD_1x_WPGE_W 3 -+#define CSD_1x_RSVD4_W 3 -+#define CSD_1x_R2WF_W 3 -+#define CSD_1x_WBL_W 3 -+#define CSD_1x_WBP_W 3 -+#define CSD_1x_RSVD5_W 3 -+#define CSD_1x_FFG_W 3 -+#define CSD_1x_COPY_W 3 -+#define CSD_1x_PWP_W 3 -+#define CSD_1x_TWP_W 3 -+#define CSD_1x_FF_W 3 -+#define CSD_1x_RSVD6_W 3 -+#define CSD_1x_CRC_W 3 -+#define CSD_1x_ONE_W 3 -+ -+#define SD_CSD_1x_FIELD(name,pcsd) \ -+ ((((unsigned long *)pcsd)[CSD_1x_## name ##_W] >> \ -+ CSD_1x_## name ##_OFF) & CSD_1x_## name ##_MASK) -+ -+#define SD_CSD_FIELD(name,pcsd) \ -+ ((SD_CSD_1x_FIELD(VER,pcsd) == 0x0) ? \ -+ SD_CSD_1x_FIELD(name,pcsd) : SD_CSD_2x_FIELD(name,pcsd)) -+ -+#define SD_CSD_1x_CSIZE(pcsd) \ -+ (SD_CSD_1x_FIELD(CSIZE,pcsd)+(SD_CSD_1x_FIELD(CSIZE_H,pcsd) << 2)) -+ -+#define SD_CSD_VER(pcsd) \ -+ (SD_CSD_1x_FIELD(VER,pcsd)) -+ -+#define MMC_CSD_VER(pcsd) SD_CSD_VER(pcsd) -+#define MMC_CSD_FIELD(name,pcsd) SD_CSD_1x_FIELD(name,pcsd) -+ -+/* MMC Command numbers */ -+#define MMC_CMD_GO_IDLE_STATE 0 -+#define MMC_CMD_SEND_OP_COND 1 -+#define MMC_CMD_ALL_SEND_CID 2 -+#define MMC_CMD_SET_RELATIVE_ADDR 3 -+#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3 -+#define MMC_CMD_SET_DSR 4 -+#define MMC_CMD_SELECT_CARD 7 -+#define MMC_CMD_IF_COND 8 -+#define MMC_CMD_SEND_CSD 9 -+#define MMC_CMD_SEND_CID 10 -+#define MMC_CMD_SEND_STATUS 13 -+#define MMC_CMD_SET_BLOCKLEN 16 -+#define MMC_CMD_READ_SINGLE_BLOCK 17 -+#define MMC_CMD_READ_MULTIPLE_BLOCK 18 -+#define MMC_CMD_WRITE_BLOCK 24 -+#define MMC_CMD_APP_CMD 55 -+ -+#define MMC_ACMD_BUS_WIDTH 6 -+#define MMC_ACMD_SD_SEND_OP_COND 41 -+ -+#define R1_ILLEGAL_COMMAND (1 << 22) -+#define R1_APP_CMD (1 << 5) -+ -+#endif /* __ASM_AT572D940_MMC_H */ -+ -diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/timer.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/timer.h ---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/timer.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/timer.h 2009-01-04 22:02:50.000000000 +0100 -@@ -0,0 +1,30 @@ -+/* -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Author: Antonio R. Costa -+ */ -+ -+#ifndef _AT91_TIMER_H_ -+#define _AT91_TIMER_H_ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//include/configs/at572d940hfeb.h u-boot-2009.01-rc1/include/configs/at572d940hfeb.h ---- u-boot-2009.01-rc1-0rig//include/configs/at572d940hfeb.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01-rc1/include/configs/at572d940hfeb.h 2009-01-04 22:04:18.000000000 +0100 -@@ -0,0 +1,285 @@ -+/* -+ * (C) Copyright 2008 -+ * Antonio R. Costa atmel.com> -+ * ATMEL CORP -+ * -+ * Configuation settings for the AT572D940HFEB board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* ARM asynchronous clock */ -+/* Miniloader */ -+#define AT91_MAIN_CLOCK 160000000 /* from 12 MHz crystal */ -+#define AT91_MASTER_CLOCK 80000000 /* peripheral = main / 2 */ -+ -+/* ROM Boot */ -+//#define AT91_MAIN_CLOCK 96000000 /* from 18.432 MHz crystal */ -+//#define AT91_MASTER_CLOCK 48000000 /* peripheral = main / 2 */ -+ -+#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ -+ -+#define AT91_CLK_DELAY_CYCLES 256 -+#define AT91_SLOW_CLOCK 32768 /* slow clock */ -+#define CONFIG_SLOW_CLK AT91_SLOW_CLOCK -+ -+#define AT91_SLOW_FREQ 0 -+#define AT91_SYS_FREQ 1 -+#define AT91_PROC_FREQ 2 -+#define AT91_MASTER_FREQ 3 -+ -+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -+#define CONFIG_AT572D940HF 1 /* It's an Atmel AT572D940HF SoC */ -+#define CONFIG_AT572D940HFEB 1 /* on an AT572D940HFEB Board */ -+#define CONFIG_MACH_AT572D940HFEB 1 -+#define CONFIG_USE_IRQ 1 -+ -+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_INITRD_TAG 1 -+ -+#define CONFIG_SKIP_LOWLEVEL_INIT 1 -+#define CONFIG_SKIP_RELOCATE_UBOOT 1 -+ -+/* -+ * Hardware drivers -+ */ -+#define CONFIG_ATMEL_USART 1 -+#undef CONFIG_USART0 -+#undef CONFIG_USART1 -+#undef CONFIG_USART2 -+#define CONFIG_USART3 1 /* USART 3 is DBGU */ -+#define CONFIG_ATMEL_MCI 1 -+#define CONFIG_BOOTDELAY 3 -+/* -+ * #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ -+ * "root=/dev/mtdblock0 rw rootfstype=jffs2" -+ */ -+ -+#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ -+ -+#define CONFIG_ENV_OVERWRITE 1 -+ -+/* -+ * BOOTP options -+ */ -+#define CONFIG_BOOTP_BOOTFILESIZE 1 -+#define CONFIG_BOOTP_BOOTPATH 1 -+#define CONFIG_BOOTP_GATEWAY 1 -+#define CONFIG_BOOTP_HOSTNAME 1 -+ -+/* -+ * Command line configuration. -+ */ -+#include -+//#undef CONFIG_CMD_BDI -+//#undef CONFIG_CMD_IMI -+//#undef CONFIG_CMD_NET -+//#undef CONFIG_CMD_PING -+ -+#define CONFIG_AUTO_COMPLETE 1 -+#define CONFIG_CMDLINE_EDITING 1 -+ -+#undef CONFIG_CMD_FPGA -+#undef CONFIG_CMD_LOADS -+#undef CONFIG_CMD_IMLS -+#undef CONFIG_CMD_FLASH -+ -+#define CONFIG_CMD_PING 1 -+#define CONFIG_CMD_DHCP 1 -+#undef CONFIG_CMD_NAND 1 -+#define CONFIG_CMD_USB 1 -+#define CONFIG_CMD_MMC 1 -+// #undef CONFIG_CMD_I2C -+// #undef CONFIG_CMD_SPI -+// #define CONFIG_CMD_AT91_SPIMUX 1 -+#define CONFIG_CMD_FAT 1 -+#define CONFIG_CMD_EXT2 1 -+#define CONFIG_CMD_JFFS2 1 -+ -+/* SDRAM */ -+#define CONFIG_NR_DRAM_BANKS 1 -+#define PHYS_SDRAM 0x20000000 -+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -+ -+/* DataFlash */ -+#define CONFIG_HAS_DATAFLASH 1 -+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ -+#define AT91_SPI_CLK 33000000 -+#define DATAFLASH_TCSS (0x1a << 16) -+#define DATAFLASH_TCHS (0x01 << 24) -+ -+/* NAND flash */ -+#define NAND_MAX_CHIPS 1 -+#define CONFIG_SYS_MAX_NAND_DEVICE 1 -+#define CONFIG_SYS_NAND_BASE 0x40000000 -+#define CONFIG_SYS_NAND_DBW_8 1 -+ -+#define CONFIG_SYS_FLASH_BASE 0x10000000 -+#define CONFIG_SYS_BOOT_SIZE (7 * 0x1000) /* 7 4K sectors */ -+#define CONFIG_SYS_ENV_ADDR 0x10007000 -+#define CONFIG_SYS_ENV_SIZE 0x1000 /* 4K */ -+ -+#define CONFIG_U_BOOT_BASE 0x10008000 -+#define CONFIG_U_BOOT_SIZE (10 * 0x1000) /* 10 4K sectors */ -+ -+#define CONFIG_MAX_FLASH_SECT 135 -+#define CONFIG_MAX_FLASH_BANKS 1 -+#define CONFIG_FLASH_ERASE_TOUT 120000 -+#define CONFIG_FLASH_WRITE_TOUT 500 -+#define CONFIG_USE_BUFFER_WRITE 1 -+ -+#undef CONFIG_ENV_IS_IN_NVRAM -+#undef CONFIG_ENV_IS_IN_EEPROM -+#undef CONFIG_ENV_IS_IN_FLASH -+#undef CONFIG_ENV_IS_IN_DATAFLASH -+#undef CONFIG_ENV_IS_IN_NAND -+#undef CONFIG_ENV_IS_IN_ONENAND -+ -+#define CONFIG_ENV_IS_NOWHERE 1 -+ -+#define PHYS_FLASH_1 CONFIG_FLASH_BASE -+ -+/* NOR flash - no real flash on this board */ -+#define CONFIG_SYS_NO_FLASH 1 -+#define CONFIG_SYS_MAX_FLASH_SECT 16 -+#define CONFIG_SYS_MAX_FLASH_BANKS 1 -+#define CONFIG_SYS_BOOT_SIZE 16384 -+#define CONFIG_SYS_U_BOOT_BASE 0x00000000 -+#define CONFIG_SYS_FLASH_ERASE_TOUT 10 -+ -+/* Ethernet */ -+ -+#define CONFIG_MACB 1 -+#define CONFIG_RMII 1 -+#define CONFIG_NET_MULTI 1 -+#define CONFIG_NET_RETRY_COUNT 20 -+#define CONFIG_RESET_PHY_R 1 -+#define CONFIG_ETHADDR 00:11:22:33:AA:BB -+#define CONFIG_IPADDR 172.16.1.187 -+#define CONFIG_NETMASK 255.255.0.0 -+#define CONFIG_HOSTNAME D940DEB -+#define CONFIG_SERVERIP 172.16.1.30 -+#define CONFIG_BOOTFILE d940deb.bin -+ -+/* USB */ -+#define CONFIG_USBH 1 -+#define CONFIG_USB_OHCI_NEW 1 -+#define LITTLEENDIAN 1 -+#define CONFIG_DOS_PARTITION 1 -+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT572D940_UHP_BASE */ -+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at572d940" -+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -+#define CONFIG_SYS_USB_STORAGE 1 -+ -+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -+ -+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -+#define CONFIG_SYS_MEMTEST_END 0x23e00000 -+ -+#undef CONFIG_USE_DATAFLASH_CS0 -+#undef CONFIG_USE_DATAFLASH_CS1 -+#undef CONFIG_USE_NANDFLASH -+#define CONFIG_USE_SD 1 -+ -+#ifdef CONFIG_USE_DATAFLASH_CS0 -+ -+/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -+#define CONFIG_ENV_IS_IN_DATAFLASH 1 -+#define CONFIG_SYS_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) -+#define CONFIG_ENV_OFFSET 0x4200 -+#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -+#define CONFIG_ENV_SIZE 0x4200 -+#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm" -+ -+#elif CONFIG_USE_DATAFLASH_CS1 -+ -+/* bootstrap + u-boot + env + linux in dataflash on CS1 */ -+#define CONFIG_ENV_IS_IN_DATAFLASH 1 -+#define CONFIG_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) -+#define CONFIG_ENV_OFFSET 0x4200 -+#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) -+#define CONFIG_ENV_SIZE 0x4200 -+#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm" -+ -+#elif CONFIG_USE_NANDFLASH -+ -+/* bootstrap + u-boot + env + linux in nandflash */ -+#define CONFIG_ENV_IS_IN_NAND 1 -+#define CONFIG_ENV_OFFSET 0x60000 -+#define CONFIG_ENV_OFFSET_REDUND 0x80000 -+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -+ -+#elif CONFIG_USE_SD -+//#define CONFIG_ENV_IS_IN_DATAFLASH 1 -+#define CONFIG_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) -+#define CONFIG_ENV_OFFSET 0x4200 -+#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) -+#define CONFIG_ENV_SIZE 0x4200 -+ -+#define CONFIG_MMC 1 -+#define CONFIG_SD_CARD_BOOT 1 -+ -+//#define CONFIG_MMC_CLK_OD 1500000 -+//#define CONFIG_MMC_CLK_PP 1500000 -+#define CONFIG_MMC_CLK_OD 20000000 -+#define CONFIG_MMC_CLK_PP 20000000 -+#define CONFIG_MMC_OP_COND (0x401f8000) /* SDHC + voltage rage 2.7-3.3 */ -+ -+#define CONFIG_BOOTCOMMAND "mmcinit; fatload mmc 0:1 0x21400000 uLinux.img; fatload mmc 0:1 0x21100000 initrd.img; bootm 0x21400000" -+#else -+#define CONFIG_ENV_SIZE 0x1000 -+ -+#endif -+ -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } -+ -+#define CONFIG_SYS_PROMPT "Diopsis U-Boot> " -+#define CONFIG_SYS_CBSIZE 256 -+#define CONFIG_SYS_MAXARGS 16 -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -+#define CONFIG_SYS_LONGHELP 1 -+#define CONFIG_CMDLINE_EDITING 1 -+ -+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) -+/* -+ * Size of malloc() pool -+ */ -+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ -+ -+#define CONFIG_STACKSIZE (32*1024) /* regular stack */ -+ -+#ifdef CONFIG_USE_IRQ -+#define CONFIG_STACKSIZE_IRQ 4096 -+#define CONFIG_STACKSIZE_FIQ 4096 -+//#error CONFIG_USE_IRQ not supported -+#endif -+ -+#endif -+ -diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01-rc1/Makefile ---- u-boot-2009.01-rc1-0rig//Makefile 2009-01-04 22:02:22.000000000 +0100 -+++ u-boot-2009.01-rc1/Makefile 2009-01-04 22:02:50.000000000 +0100 -@@ -2702,6 +2702,12 @@ - @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 - - ######################################################################## -+# AT572D940HF -+######################################################################## -+# -+at572d940hfeb_config : unconfig -+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at572d940hfeb atmel at572d940hf -+ - ## ARM Integrator boards - see doc/README-integrator for more info. - integratorap_config \ - ap_config \ diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch deleted file mode 100644 index bac2f935f..000000000 --- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch +++ /dev/null @@ -1,412 +0,0 @@ -diff -urN u-boot-2009.01-0rig//common/cmd_mem.c u-boot-2009.01/common/cmd_mem.c ---- u-boot-2009.01-0rig//common/cmd_mem.c 2008-12-16 23:48:27.000000000 +0100 -+++ u-boot-2009.01/common/cmd_mem.c 2009-01-04 13:27:03.000000000 +0100 -@@ -37,11 +37,120 @@ - #endif - #include - -+#include -+#ifdef CONFIG_SYS_NO_FLASH -+#define in_flash(x) 0 -+#else -+#define in_flash(x) (addr2info(x)!=NULL) -+#endif -+ -+#ifdef CONFIG_HAS_DATAFLASH -+#define in_dataflash(x) addr_dataflash(x) -+#else -+#define in_dataflash(x) 0 -+#endif -+ -+#ifdef CONFIG_CMD_MMC -+#define in_SD_card(x) (mmc2info(x) != 0) -+#else -+#define in_SD_card(x) 0 -+#endif -+ -+ - #ifdef CMD_MEM_DEBUG - #define PRINTF(fmt,args...) printf (fmt ,##args) - #else - #define PRINTF(fmt,args...) - #endif -+#if defined(CONFIG_HAS_DATAFLASH) -+#define DF_PAGE_VALID 0x01 -+#define CONFIG_SYS_DATAFLASH_PAGE_SIZE 1056 -+typedef char dfpagebuf[CONFIG_SYS_DATAFLASH_PAGE_SIZE]; -+dfpagebuf dfcache[3]; // Cache buffers for dataflash -+unsigned char dfvalid[3]; // if DF_PAGE_VALID is set, then the, cache buffer contents are valid -+unsigned char dflru[3]; // Least recently used algorithm to determine which buffer to reuse -+unsigned int dfpage[3]; // TLB for cache, tells which page is loaded into dfcache -+ -+ -+void flush_mem_cache(void) -+{ -+ dfvalid[0] = dfvalid[1] = dfvalid[2] = 0; -+ dflru[0] = 0; -+ dflru[1] = 1; -+ dflru[2] = 2; -+} -+ -+typedef union { -+ uchar byte[4]; -+ ulong word; -+} reg; -+ -+unsigned int replace(char *p, unsigned int data) -+{ -+ ulong i; -+ reg in; -+ reg out; -+ -+ in.word = data; -+ for(i = 0; i <= 3; i++) { -+ out.byte[0] = *p; -+ *p++ = in.byte[0]; -+ } -+ return out.word; -+} -+ -+ulong translate(unsigned int addr) -+{ -+ unsigned int page = (addr) / CONFIG_SYS_DATAFLASH_PAGE_SIZE; -+ unsigned int index = (addr) - (page * CONFIG_SYS_DATAFLASH_PAGE_SIZE); -+ unsigned int i,rc; -+ for(i = 0; i < 2; i++) { -+ if((page == dfpage[i]) && (dfvalid[i] & DF_PAGE_VALID)) { -+ if(dflru[0] == i) { -+ // nothing -+ } else if(dflru[1] == i) { -+ // swap with 0 -+ dflru[1] = dflru[0]; -+ dflru[0] = i; -+ } else { -+ // shift down -+ dflru[2] = dflru[1]; -+ dflru[1] = dflru[0]; -+ dflru[0] = i; -+ } -+ return (unsigned int) &dfcache[i][index]; -+ } -+ } -+ // not found -+ // use buffer found in dflru[2] -+ i = dflru[2]; -+ if ((rc = read_dataflash(addr, CONFIG_SYS_DATAFLASH_PAGE_SIZE, dfcache[i])) == DATAFLASH_OK){ -+ dflru[2] = dflru[1]; -+ dflru[1] = dflru[0]; -+ dflru[0] = i; -+ dfvalid[i] |= DF_PAGE_VALID; -+ return (unsigned int) &dfcache[i][index]; -+ } -+ return 0; -+} -+ -+ -+ -+void df_writed(unsigned char *ldest, ulong laddr) -+{ -+ -+} -+void df_writew(unsigned char *ldest,ushort laddr) {} -+void df_writeb(unsigned char *ldest, u_char laddr) {} -+#endif -+ -+#if defined(CONFIG_HAS_DATAFLASH) -+void flush_mem_cache(void); -+ulong translate(unsigned int addr); -+#else -+#define flush_mem_cache(x) -+#define translate(x) x -+#endif - - static int mod_mem(cmd_tbl_t *, int, int, int, char *[]); - -@@ -67,7 +176,8 @@ - ulong nbytes, linebytes; - #endif - int size; -- int rc = 0; -+ int rc = 0; -+ int done = 0; - - /* We use the last specified parameters, unless new ones are - * entered. -@@ -106,26 +216,29 @@ - * We buffer all read data, so we can make sure data is read only - * once, and all accesses are with the specified bus width. - */ -- nbytes = length * size; -- do { -- char linebuf[DISP_LINE_LEN]; -- void* p; -- linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; -- -- rc = read_dataflash(addr, (linebytes/size)*size, linebuf); -- p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr; -- print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size); -- -- nbytes -= linebytes; -- addr += linebytes; -- if (ctrlc()) { -- rc = 1; -- break; -- } -- } while (nbytes > 0); --#else -+ if(in_dataflash(addr)) { -+ nbytes = length * size; -+ do { -+ char linebuf[DISP_LINE_LEN]; -+ void* p; -+ linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; -+ -+ rc = read_dataflash(addr, (linebytes/size)*size, linebuf); -+ p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr; -+ print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size); -+ -+ nbytes -= linebytes; -+ addr += linebytes; -+ if (ctrlc()) { -+ rc = 1; -+ break; -+ } -+ } while (nbytes > 0); -+ done = 1; -+ } -+#endif - --# if defined(CONFIG_BLACKFIN) -+#if defined(CONFIG_BLACKFIN) - /* See if we're trying to display L1 inst */ - if (addr_bfin_on_chip_mem(addr)) { - char linebuf[DISP_LINE_LEN]; -@@ -142,15 +255,15 @@ - break; - } - } while (nbytes > 0); -- } else --# endif -+ done = 1; -+ } -+#endif - -- { -+ if (!done) { - /* Print the lines. */ - print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size); - addr += size*length; - } --#endif - - dp_last_addr = addr; - dp_last_length = length; -@@ -273,6 +386,8 @@ - int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) - { - ulong addr1, addr2, count, ngood; -+ ulong laddr1, laddr2; -+ - int size; - int rcode = 0; - -@@ -294,12 +409,6 @@ - - count = simple_strtoul(argv[3], NULL, 16); - --#ifdef CONFIG_HAS_DATAFLASH -- if (addr_dataflash(addr1) | addr_dataflash(addr2)){ -- puts ("Comparison with DataFlash space not supported.\n\r"); -- return 0; -- } --#endif - - #ifdef CONFIG_BLACKFIN - if (addr_bfin_on_chip_mem(addr1) || addr_bfin_on_chip_mem(addr2)) { -@@ -308,9 +417,12 @@ - } - #endif - -+ flush_mem_cache(); - ngood = 0; - - while (count-- > 0) { -+ laddr1 = translate((ulong) addr1); -+ laddr2 = translate((ulong) addr2); - if (size == 4) { - ulong word1 = *(ulong *)addr1; - ulong word2 = *(ulong *)addr2; -@@ -359,6 +471,14 @@ - { - ulong addr, dest, count; - int size; -+#ifdef CONFIG_HAS_DATAFLASH -+ int rc; -+ unsigned int crc,oldcrc,use_crc; -+ unsigned int olddata; -+ char *p; -+ char *env_crc_check; -+ -+#endif - - if (argc != 4) { - printf ("Usage:\n%s\n", cmdtp->usage); -@@ -385,13 +505,14 @@ - - #ifndef CONFIG_SYS_NO_FLASH - /* check if we are copying to Flash */ -- if ( (addr2info(dest) != NULL) --#ifdef CONFIG_HAS_DATAFLASH -- && (!addr_dataflash(dest)) --#endif -- ) { -+ if (in_flash(dest)) { - int rc; -- -+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_CMD_MMC) -+ if(in_dataflash(addr) || in_SD_card(addr)) { -+ puts ("Cannot copy to flash from storage...\n"); -+ return 1; -+ } -+#endif - puts ("Copy to Flash... "); - - rc = flash_write ((char *)addr, dest, count*size); -@@ -405,9 +526,15 @@ - #endif - - #if defined(CONFIG_CMD_MMC) -- if (mmc2info(dest)) { -+ if (in_SD_card(dest)) { - int rc; - -+#if defined(CONFIG_HAS_DATAFLASH) -+ if(in_dataflash(addr) || in_SD_card(addr)) { -+ puts ("Cannot copy to flash-card from another storage location...\n"); -+ return 1; -+ } -+#endif - puts ("Copy to MMC... "); - switch (rc = mmc_write ((uchar *)addr, dest, count*size)) { - case 0: -@@ -424,9 +551,12 @@ - return 0; - } - -- if (mmc2info(addr)) { -+ if (in_SD_card(addr)) { - int rc; -- -+ if(in_flash(dest) || in_dataflash(dest) || in_SD_card(dest)) { -+ puts ("Cannot copy from flash-card from another storage location...\n"); -+ return 1; -+ } - puts ("Copy from MMC... "); - switch (rc = mmc_read (addr, (uchar *)dest, count*size)) { - case 0: -@@ -445,39 +575,64 @@ - #endif - - #ifdef CONFIG_HAS_DATAFLASH -- /* Check if we are copying from RAM or Flash to DataFlash */ -- if (addr_dataflash(dest) && !addr_dataflash(addr)){ -- int rc; -- -- puts ("Copy to DataFlash... "); -- -- rc = write_dataflash (dest, addr, count*size); -- -+ /* Check if we are copying from Dataflash to RAM */ -+ /* Note: Cannot copy from Dataflash to Flash directly */ -+ env_crc_check = getenv("crc-check"); -+ use_crc = (strcmp(env_crc_check, "on") == 0); -+ if (in_dataflash(addr)) { -+ if(in_dataflash(dest) || in_flash(dest) || in_SD_card(dest)) { -+ puts ("Cannot copy to dataflash from another storage location...\n"); -+ return 1; -+ } -+ puts ("Copy from DataFlash..."); -+ rc = read_dataflash(addr, count * size, (char *) dest); - if (rc != 1) { - dataflash_perror (rc); - return (1); - } -- puts ("done\n"); -- return 0; -- } - -- /* Check if we are copying from DataFlash to RAM */ -- if (addr_dataflash(addr) && !addr_dataflash(dest) --#ifndef CONFIG_SYS_NO_FLASH -- && (addr2info(dest) == NULL) --#endif -- ){ -- int rc; -- rc = read_dataflash(addr, count * size, (char *) dest); -+ if (use_crc) { -+ puts ("(Calculating CRC) ... "); -+ p = (char *) dest + (count * size) + 3; -+ olddata = replace(p,0); -+ rc = read_dataflash(addr, (count * size)+4, (char *) dest); -+ oldcrc = replace(p,olddata); -+ crc = crc32 (0, (const uchar *) dest, count*size); -+ if(crc != oldcrc) { -+ printf("\n\rBad CRC, %x expected, found %x... \n\r",oldcrc,crc); -+ return 1; -+ } else { -+ printf("[0x%x]",crc); -+ } -+ } -+ puts ("done\n\r"); -+ return 0; -+ } else if (!in_dataflash(addr) && in_dataflash(dest)) { -+ if(in_dataflash(addr) || in_SD_card(addr)) { -+ puts ("Cannot copy to dataflash from another storage location...\n"); -+ return 1; -+ } -+ puts ("Copy to DataFlash... "); -+ if (use_crc) { -+ puts ("(Calulating CRC) ... "); -+ crc = crc32 (0, (const uchar *) addr, count*size); -+ // Save CRC in small endian format -+ printf("= 0x%08x written to [%08x] ... ",crc,(unsigned int) (dest + count * size)); -+ p = (char *) addr+(count*size); -+ olddata = replace(p,crc); -+ rc = write_dataflash (dest, addr, count*size+4); -+ crc = replace((char *) addr+(count*size),olddata); -+ } else { -+ rc = write_dataflash (dest, addr, count*size); -+ } - if (rc != 1) { - dataflash_perror (rc); - return (1); - } -+ puts ("done\n"); - return 0; -- } -- -- if (addr_dataflash(addr) && addr_dataflash(dest)){ -- puts ("Unsupported combination of source/destination.\n\r"); -+ } else if (in_dataflash(addr) && in_dataflash(dest)){ -+ puts ("Cannot copy between two dataflash areas\n\r"); - return 1; - } - #endif -@@ -490,6 +645,7 @@ - } - #endif - -+ /* Copy between RAM locations, or parallell flash to RAM */ - while (count-- > 0) { - if (size == 4) - *((ulong *)dest) = *((ulong *)addr); -@@ -1011,7 +1167,7 @@ - } - - #ifdef CONFIG_HAS_DATAFLASH -- if (addr_dataflash(addr)){ -+ if (in_dataflash(addr)){ - puts ("Can't modify DataFlash in place. Use cp instead.\n\r"); - return 0; - } - -- cgit v1.2.3