From 453dca995ee437b2f6fc3e0a6e4e2b4317346dae Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Sat, 13 Oct 2007 18:30:28 +0000 Subject: Create Advanced Linux Configuration option/Remove experimental --- target/Config.in | 34 +- target/Makefile.in | 13 +- target/device/Atmel/Makefile.in | 24 +- .../Atmel/at91sam9260dfc/at91sam9260dfc_defconfig | 424 +++++++++-------- target/linux-experimental/Makefile.in | 318 ------------- target/linux/Config.in | 371 +-------------- target/linux/Config.in.advanced | 501 +++++++++++++++++++++ target/linux/Config.in.experimental | 346 ++++++++++++++ target/linux/Makefile.in.advanced | 438 ++++++++++++++++++ 9 files changed, 1570 insertions(+), 899 deletions(-) delete mode 100644 target/linux-experimental/Makefile.in create mode 100644 target/linux/Config.in.advanced create mode 100644 target/linux/Config.in.experimental create mode 100644 target/linux/Makefile.in.advanced diff --git a/target/Config.in b/target/Config.in index 2ca190c9c..a9a40e4d3 100644 --- a/target/Config.in +++ b/target/Config.in @@ -23,26 +23,52 @@ endmenu menu "Kernel" choice prompt "Kernel type" - default BR2_KERNEL_LINUX + default BR2_KERNEL_LINUX_ADVANCED if BR2_TARGET_ATMEL + default BR2_KERNEL_LINUX if !BR2_TARGET_ATMEL config BR2_KERNEL_none bool "none" help Do not build a kernel +config BR2_KERNEL_LINUX_ADVANCED + bool "linux (Advanced configuration)" + select BR2_PACKAGE_LINUX + help + The Linux kernel - Advanced Configuration. + http://www.kernel.org/ + + Note: Requires kernel-headers >= 2.6.19 since the other + kernel headers are just that (headers) and not full + kernels. This is a feature. + config BR2_KERNEL_LINUX - bool "linux" + bool "linux (Same version as linux headers)" + select BR2_PACKAGE_LINUX help - Linux kernel + The Linux kernel. + http://www.kernel.org/ + + Note: Requires kernel-headers >= 2.6.19 since the other + kernel headers are just that (headers) and not full + kernels. This is a feature. config BR2_KERNEL_HURD bool "hurd" help GNU/Hurd kernel endchoice -if BR2_KERNEL_LINUX + +config BR2_PACKAGE_LINUX + bool + default n + +if BR2_PACKAGE_LINUX source "target/linux/Config.in" +#source "target/linux/Config.in.experimental" +source "target/linux/Config.in.advanced" endif + if BR2_KERNEL_HURD source "target/hurd/Config.in" endif diff --git a/target/Makefile.in b/target/Makefile.in index bb7d596cc..b8e50577a 100644 --- a/target/Makefile.in +++ b/target/Makefile.in @@ -17,11 +17,14 @@ include target/*/*.mk # We already did add the kernel target to TARGETS and now just pull in the rules # to actually build this target. -#ifeq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG))),y) +ifeq ($(strip $(subst ",,$(BR2_KERNEL_LINUX))),y) #")) -#include target/linux/Makefile.in -##include target/linux-experimental/Makefile.in -#else include target/linux/Makefile.in -#endif +endif + +ifeq ($(strip $(subst ",,$(BR2_KERNEL_LINUX_ADVANCED))),y) +#")) +include target/linux/Makefile.in.advanced +endif + include target/hurd/Makefile.in diff --git a/target/device/Atmel/Makefile.in b/target/device/Atmel/Makefile.in index dbc91d4fb..898e3985f 100644 --- a/target/device/Atmel/Makefile.in +++ b/target/device/Atmel/Makefile.in @@ -53,16 +53,15 @@ endif LINUX26_COPYTO:=/tftpboot ifeq ($(DEFAULT_KERNEL_HEADERS),2.6.22.1) -KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/linux/kernel-patches-$(DOWNLOAD_LINUX26_VERSION) +KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/linux/kernel-patches-$(LINUX26_VERSION) else # Patch during kernel header build ifeq ($(BR2_avr32),y) -KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-avr32/kernel-patches-$(DOWNLOAD_LINUX26_VERSION) +KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-avr32/kernel-patches-$(LINUX26_VERSION) endif # Patch during kernel build ifeq ($(BR2_arm),y) -#LINUX26_PATCH_DIR:=target/device/Atmel/arch-at91/kernel-patches-$(DOWNLOAD_LINUX26_VERSION) -KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-arm/kernel-patches-$(DOWNLOAD_LINUX26_VERSION) +KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-arm/kernel-patches-$(LINUX26_VERSION) endif endif @@ -73,7 +72,7 @@ DFB_BOARD_NAME:=$(BOARD_NAME) BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config -LINUX26_KERNEL=$(BINARIES_DIR)/$(PROJECT)-linux-$(LINUX26_VERSION) +LINUX26_KERNEL=$(BINARIES_DIR)/$(PROJECT)-linux-$(LINUX26_VERSION)-$(DATE) # Update things in board specific makefiles include target/device/Atmel/*/Makefile.in @@ -99,19 +98,4 @@ ifeq ($(strip $(BR2_TARGET_AT91BOOTSTRAP)),y) include $(ATMEL_PATH)/at91bootstrap/at91bootstrap.mk endif -atmel_status: - @echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR) - @echo BOARD_NAME=$(BOARD_NAME) - @echo BR2_BOARD_PATH=$(BR2_BOARD_PATH) - @echo BR2_MAJOR_MINOR=$(BR2_LINUX_MAJOR_VERSION)$(BR2_LINUX_MINOR_VERSION) - @echo MAJOR_MINOR=$(LINUX_MAJOR_VER)$(LINUX_MINOR_VER) - @echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION) - @echo LINUX_SOURCE=$(LINUX_SOURCE) - @echo TARGETS=$(TARGETS) - @echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR) - @echo LINUX26_BINLOC=$(LINUX26_BINLOC) - @echo LINUX26_FORMAT=$(LINUX26_FORMAT) - @echo LINUX26_KERNEL=$(LINUX26_KERNEL) - -#TARGETS+=atmel_status endif diff --git a/target/device/Atmel/at91sam9260dfc/at91sam9260dfc_defconfig b/target/device/Atmel/at91sam9260dfc/at91sam9260dfc_defconfig index 69afb804b..157ba29ce 100644 --- a/target/device/Atmel/at91sam9260dfc/at91sam9260dfc_defconfig +++ b/target/device/Atmel/at91sam9260dfc/at91sam9260dfc_defconfig @@ -1,15 +1,9 @@ # # Automatically generated make config: don't edit -# Sat Jul 14 15:27:09 2007 +# Sat Oct 13 17:46:13 2007 # BR2_HAVE_DOT_CONFIG=y - -# -# Project Options -# -BR2_PROJECT="at91sam9260dfc" -BR2_HOSTNAME="at91sam9260dfc" -BR2_BANNER="Welcome to the Erik's uClibc development environment running on the AT91SAM9260EK" +BR2_VERSION="0.10.0-svn" # BR2_alpha is not set BR2_arm=y # BR2_armeb is not set @@ -26,14 +20,17 @@ BR2_arm=y # BR2_sh is not set # BR2_sh64 is not set # BR2_sparc is not set +# BR2_sparc64 is not set # BR2_x86_64 is not set BR2_generic_arm=y +# BR2_arm7tdmi is not set # BR2_arm610 is not set # BR2_arm710 is not set # BR2_arm720t is not set # BR2_arm920t is not set # BR2_arm922t is not set # BR2_arm926t is not set +# BR2_arm10t is not set # BR2_arm1136jf_s is not set # BR2_arm1176jz_s is not set # BR2_arm1176jzf_s is not set @@ -42,38 +39,147 @@ BR2_generic_arm=y # BR2_xscale is not set # BR2_iwmmxt is not set BR2_ARM_TYPE="GENERIC_ARM" -BR2_ARM_OABI=y -# BR2_ARM_EABI is not set +# BR2_ARM_OABI is not set +BR2_ARM_EABI=y BR2_ARCH="arm" BR2_ENDIAN="LITTLE" +# +# Target options +# + +# +# Project Options +# +BR2_PROJECT="at91sam9260dfc" +BR2_HOSTNAME="at91sam9260dfc" +BR2_BANNER="Welcome to the Erik's uClibc development environment running on the AT91SAM9260EK" + +# +# Preset Devices +# +# BR2_TARGET_ARM is not set +BR2_TARGET_ATMEL=y + +# +# Atmel AT91 Specific Device Support +# +BR2_TARGET_AT91=y +# BR2_TARGET_AT91RM9200 is not set +BR2_TARGET_AT91SAM9260=y +# BR2_TARGET_AT91SAM9260A is not set +# BR2_TARGET_AT91SAM9261 is not set +# BR2_TARGET_AT91SAM9261S is not set +# BR2_TARGET_AT91SAM9262 is not set +# BR2_TARGET_AT91SAM9263 is not set +# BR2_TARGET_AT91SAM9XE is not set +# BR2_TARGET_AT91RM9200DF is not set +# BR2_TARGET_AT91RM9200SE is not set +# BR2_TARGET_AT91RM9200EK is not set +# BR2_TARGET_AT91RM9200DK is not set +BR2_TARGET_AT91SAM9260DFC=y +# BR2_TARGET_AT91SAM9260EK is not set +# BR2_TARGET_AT91SAM9260PF is not set +# BR2_TARGET_AT91SAM9261EK is not set +# BR2_TARGET_AT91SAM9262EK is not set +# BR2_TARGET_AT91SAM9263EK is not set +# BR2_TARGET_AT91SAM9XEEK is not set +BR2_BOARD_NAME="at91sam9260dfc" +BR2_TARGET_AT91_ADVANCED_INFO=y + +# +# Package support +# + +# +# Secondary locations +# +BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6" +BR2_TARGET_ATMEL_COPYTO="/tftpboot" +BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_SERVERIP="10.175.196.221" +BR2_TARGET_UBOOT_IPADDR="10.175.196.18" +BR2_TARGET_UBOOT_GATEWAY="10.175.196.1" +BR2_TARGET_UBOOT_NETMASK="255.255.255.0" +BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18" +BR2_TARGET_AT91BOOTSTRAP=y +# BR2_TARGET_AT91BOOT_DATAFLASH is not set +BR2_TARGET_AT91BOOT_DATAFLASHCARD=y +# BR2_TARGET_AT91BOOT_NANDFLASH is not set +# BR2_TARGET_AT91BOOT_FLASH is not set +BR2_TARGET_AT91BOOTSTRAP_MEMORY="dataflashcard" +BR2_AT91BOOTSTRAP_IMG_SIZE="0x32000" +BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT=y +# BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM is not set +# BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM is not set +BR2_AT91BOOTSTRAP_JUMP_ADDR="0x23F00000" + +# +# It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR) +# +# BR2_TARGET_SHARP is not set + +# +# Generic System Support +# +# BR2_TARGET_GENERIC_ACCESS_POINT is not set +# BR2_TARGET_GENERIC_FIREWALL is not set +# BR2_TARGET_GENERIC_DEV_SYSTEM is not set + # # Build options # BR2_WGET="wget --passive-ftp -nd" -BR2_SVN="svn co" +BR2_SVN_CO="svn co" +BR2_SVN_UP="svn up" +BR2_GIT="git clone" BR2_ZCAT="gzip -d -c" BR2_BZCAT="bzcat" BR2_TAR_OPTIONS="" BR2_DL_DIR="/usr/local/install/downloads" + +# +# Mirrors and Download locations +# BR2_SOURCEFORGE_MIRROR="easynews" + +# +# Atmel Mirrors +# BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/" BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/" -BR2_STAGING_DIR="/usr/local/arm/gcc-4.2.0-uclibc-20070714" +BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir" BR2_TOPDIR_PREFIX="" BR2_TOPDIR_SUFFIX="" +BR2_ROOTFS_PREFIX="rootfs" +BR2_ROOTFS_SUFFIX="$(DATE)" BR2_GNU_BUILD_SUFFIX="pc-linux-gnu" BR2_GNU_TARGET_SUFFIX="linux-uclibc" BR2_JLEVEL=2 # BR2_PREFER_IMA is not set # BR2_DEPRECATED is not set +BR2_RECENT=y +BR2_STRIP_strip=y +# BR2_STRIP_sstrip is not set +# BR2_STRIP_none is not set # BR2_PREFER_STATIC_LIB is not set -BR2_TOOLCHAIN_BUILDROOT=y -# BR2_TOOLCHAIN_EXTERNAL is not set +# BR2_HAVE_MANPAGES is not set +# BR2_HAVE_INFOPAGES is not set +BR2_UPDATE_CONFIG=y # -# Toolchain Options +# Toolchain # +BR2_TOOLCHAIN_BUILDROOT=y +# BR2_TOOLCHAIN_EXTERNAL is not set +# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set +BR2_TOOLCHAIN_SOURCE=y +BR2_EXT_GCC_VERSION_4_1_2=y +BR2_EXT_GCC_VERSION_4_2_1=y +BR2_EXT_BINUTILS_VERSION_2_17=y +BR2_EXT_UCLIBC_VERSION_0_9_29=y +BR2_EXT_UCLIBC_VERSION_0_9_28_3=y # # Kernel Header Options @@ -85,15 +191,24 @@ BR2_TOOLCHAIN_BUILDROOT=y # BR2_KERNEL_HEADERS_2_6_9 is not set # BR2_KERNEL_HEADERS_2_6_11 is not set # BR2_KERNEL_HEADERS_2_6_12 is not set -# BR2_KERNEL_HEADERS_2_6_19_2 is not set +# BR2_KERNEL_HEADERS_2_6_20_4 is not set # BR2_KERNEL_HEADERS_2_6_20 is not set -BR2_KERNEL_HEADERS_2_6_21=y -BR2_DEFAULT_KERNEL_HEADERS="2.6.21.5" +# BR2_KERNEL_HEADERS_2_6_21_5 is not set +# BR2_KERNEL_HEADERS_2_6_21 is not set +BR2_KERNEL_HEADERS_2_6_22_1=y +# BR2_KERNEL_HEADERS_2_6_22_10 is not set +# BR2_KERNEL_HEADERS_2_6_22 is not set +# BR2_KERNEL_HEADERS_2_6_23 is not set +# BR2_KERNEL_HEADERS_SNAP is not set +# BR2_KERNEL_HEADERS_IPMI is not set +# BR2_KERNEL_HEADERS_LZMA is not set +# BR2_KERNEL_HEADERS_RT is not set +BR2_KERNEL_HEADERS_PATCH_DIR=y +BR2_DEFAULT_KERNEL_HEADERS="2.6.22.1" # # uClibc Options # -# BR2_UCLIBC_VERSION_0_9_28 is not set # BR2_UCLIBC_VERSION_0_9_28_3 is not set BR2_UCLIBC_VERSION_0_9_29=y # BR2_UCLIBC_VERSION_SNAPSHOT is not set @@ -104,60 +219,37 @@ BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config" BR2_PTHREADS_OLD=y # BR2_PTHREADS_NATIVE is not set # BR2_PTHREAD_DEBUG is not set +BR2_UCLIBC_PROGRAM_INVOCATION=y # # Binutils Options # -# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set -# BR2_BINUTILS_VERSION_2_15 is not set -# BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set -# BR2_BINUTILS_VERSION_2_16_1 is not set -# BR2_BINUTILS_VERSION_2_16_90_0_3 is not set -# BR2_BINUTILS_VERSION_2_16_91_0_5 is not set -# BR2_BINUTILS_VERSION_2_16_91_0_6 is not set -# BR2_BINUTILS_VERSION_2_16_91_0_7 is not set -BR2_BINUTILS_VERSION_2_17=y -# BR2_BINUTILS_VERSION_2_17_50_0_2 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_3 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_4 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_5 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_6 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_7 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_8 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_9 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_10 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_12 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_14 is not set -# BR2_BINUTILS_VERSION_2_17_50_0_16 is not set +# BR2_BINUTILS_VERSION_2_17 is not set # BR2_BINUTILS_VERSION_2_17_50_0_17 is not set -BR2_BINUTILS_VERSION="2.17" +BR2_BINUTILS_VERSION_2_18=y +# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set +BR2_BINUTILS_VERSION="2.18" BR2_EXTRA_BINUTILS_CONFIG_OPTIONS="" # -# Gcc Options +# GCC Options # -# BR2_GCC_VERSION_3_3_5 is not set -# BR2_GCC_VERSION_3_3_6 is not set -# BR2_GCC_VERSION_3_4_2 is not set -# BR2_GCC_VERSION_3_4_3 is not set -# BR2_GCC_VERSION_3_4_4 is not set -# BR2_GCC_VERSION_3_4_5 is not set # BR2_GCC_VERSION_3_4_6 is not set -# BR2_GCC_VERSION_4_0_0 is not set -# BR2_GCC_VERSION_4_0_1 is not set -# BR2_GCC_VERSION_4_0_2 is not set -# BR2_GCC_VERSION_4_0_3 is not set # BR2_GCC_VERSION_4_0_4 is not set -# BR2_GCC_VERSION_4_1_0 is not set -# BR2_GCC_VERSION_4_1_1 is not set # BR2_GCC_VERSION_4_1_2 is not set -BR2_GCC_VERSION_4_2_0=y +# BR2_GCC_VERSION_4_2_0 is not set +BR2_GCC_VERSION_4_2_1=y # BR2_GCC_IS_SNAP is not set -BR2_GCC_VERSION="4.2.0" +BR2_GCC_SUPPORTS_SYSROOT=y +# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set +BR2_GCC_VERSION="4.2.1" BR2_TOOLCHAIN_SYSROOT=y # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set BR2_EXTRA_GCC_CONFIG_OPTIONS="" -# BR2_INSTALL_LIBSTDCPP is not set +BR2_GCC_CROSS_CXX=y +# BR2_GCC_CROSS_FORTRAN is not set +BR2_INSTALL_LIBSTDCPP=y +# BR2_INSTALL_LIBGCJ is not set # BR2_INSTALL_OBJC is not set # BR2_INSTALL_FORTRAN is not set BR2_GCC_SHARED_LIBGCC=y @@ -189,6 +281,7 @@ BR2_PACKAGE_SSTRIP_HOST=y BR2_LARGEFILE=y # BR2_INET_IPV6 is not set # BR2_INET_RPC is not set +BR2_USE_WCHAR=y # BR2_SOFT_FLOAT is not set BR2_TARGET_OPTIMIZATION="-Os -pipe" BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y @@ -196,23 +289,14 @@ BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y # # Package Selection for the target # - -# -# The default minimal system -# BR2_PACKAGE_BUSYBOX=y -# BR2_BUSYBOX_VERSION_1_0_1 is not set -# BR2_BUSYBOX_VERSION_1_1_3 is not set # BR2_BUSYBOX_VERSION_1_2_2_1 is not set -# BR2_BUSYBOX_VERSION_1_4_0 is not set -# BR2_BUSYBOX_VERSION_1_4_1 is not set -# BR2_BUSYBOX_VERSION_1_4_2 is not set -# BR2_BUSYBOX_VERSION_1_5_0 is not set -# BR2_BUSYBOX_VERSION_1_5_1 is not set -# BR2_BUSYBOX_VERSION_1_6_0 is not set -BR2_BUSYBOX_VERSION_1_6_1=y +# BR2_BUSYBOX_VERSION_1_6_1 is not set +# BR2_BUSYBOX_VERSION_1_7_0 is not set +# BR2_BUSYBOX_VERSION_1_7_1 is not set +BR2_BUSYBOX_VERSION_1_7_2=y # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set -BR2_BUSYBOX_VERSION="1.6.1" +BR2_BUSYBOX_VERSION="1.7.2" BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config" # BR2_PACKAGE_BUSYBOX_HIDE_OTHERS is not set @@ -230,7 +314,6 @@ BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config" # BR2_PACKAGE_FLEX is not set # BR2_PACKAGE_GAWK is not set # BR2_PACKAGE_GCC_TARGET is not set -BR2_EXTRA_TARGET_GCC_CONFIG_OPTIONS="" # BR2_PACKAGE_GREP is not set # BR2_PACKAGE_MAKE is not set # BR2_PACKAGE_PATCH is not set @@ -256,7 +339,6 @@ BR2_HOST_FAKEROOT=y # BR2_PACKAGE_LIBMPFR is not set # BR2_PACKAGE_LIBTOOL is not set # BR2_PACKAGE_M4 is not set -# BR2_PACKAGE_MPATROL is not set # BR2_PACKAGE_PKGCONFIG is not set # BR2_READLINE is not set # BR2_PACKAGE_XERCES is not set @@ -272,16 +354,20 @@ BR2_HOST_FAKEROOT=y # BR2_PACKAGE_FILE is not set # BR2_PACKAGE_KEXEC is not set # BR2_PACKAGE_LESS is not set +BR2_PACKAGE_LIBDAEMON=y # BR2_PACKAGE_LIBELF is not set # BR2_PACKAGE_LIBEVENT is not set # BR2_PACKAGE_LIBFLOAT is not set +# BR2_PACKAGE_LIBGCRYPT is not set +# BR2_PACKAGE_LIBGPG_ERROR is not set # BR2_PACKAGE_LIBLOCKFILE is not set # BR2_PACKAGE_LIBSYSFS is not set +# BR2_PACKAGE_LIBXML2 is not set # BR2_PACKAGE_LOCKFILE_PROGS is not set # BR2_PACKAGE_LSOF is not set # BR2_PACKAGE_LTP-TESTSUITE is not set +# BR2_PACKAGE_LTRACE is not set # BR2_PACKAGE_LTT is not set -# BR2_PACKAGE_MICROCOM is not set # BR2_PACKAGE_MODULE_INIT_TOOLS is not set # BR2_PACKAGE_MODUTILS is not set # BR2_PACKAGE_NANO is not set @@ -298,6 +384,10 @@ BR2_HOST_FAKEROOT=y # BR2_PACKAGE_UTIL-LINUX is not set # BR2_PACKAGE_WHICH is not set BR2_NETWORK_SUPPORT=y + +# +# Networking applications +# # BR2_PACKAGE_ARGUS is not set # BR2_PACKAGE_AVAHI is not set # BR2_PACKAGE_BOA is not set @@ -310,7 +400,7 @@ BR2_NETWORK_SUPPORT=y # BR2_PACKAGE_DROPBEAR is not set # BR2_PACKAGE_ETHTOOL is not set # BR2_PACKAGE_HASERL is not set -# BR2_PACKAGE_HOSTAP is not set +# BR2_PACKAGE_IRDA_UTILS is not set # BR2_PACKAGE_IPERF is not set # BR2_PACKAGE_IPROUTE2 is not set # BR2_PACKAGE_IPSEC_TOOLS is not set @@ -319,10 +409,12 @@ BR2_NETWORK_SUPPORT=y # BR2_PACKAGE_LIBCGI is not set # BR2_PACKAGE_LIBCGICC is not set # BR2_PACKAGE_LIBPCAP is not set -# BR2_PACKAGE_LIGHTTPD is not set # BR2_PACKAGE_LINKS is not set # BR2_PACKAGE_LRZSZ is not set +# BR2_PACKAGE_MDNSRESPONDER is not set +# BR2_PACKAGE_MICROCOM is not set # BR2_PACKAGE_MROUTED is not set +# BR2_PACKAGE_MUTT is not set # BR2_PACKAGE_NBD is not set # BR2_PACKAGE_NCFTP is not set # BR2_PACKAGE_NETCAT is not set @@ -332,6 +424,7 @@ BR2_NETWORK_SUPPORT=y # BR2_PACKAGE_NETSNMP is not set # BR2_PACKAGE_NFS_UTILS is not set # BR2_PACKAGE_NTP is not set +# BR2_PACKAGE_OLSR is not set # BR2_PACKAGE_OPENNTPD is not set # BR2_PACKAGE_OPENSSH is not set # BR2_PACKAGE_OPENSSL is not set @@ -339,6 +432,8 @@ BR2_NETWORK_SUPPORT=y # BR2_PACKAGE_OPENSWAN is not set # BR2_PACKAGE_PORTMAP is not set # BR2_PACKAGE_PPPD is not set +# BR2_PACKAGE_RP_PPPOE is not set +# BR2_PACKAGE_PPTP_LINUX is not set # BR2_PACKAGE_PROFTPD is not set # BR2_PACKAGE_QUAGGA is not set @@ -357,10 +452,14 @@ BR2_NETWORK_SUPPORT=y # BR2_PACKAGE_SOCAT is not set # BR2_PACKAGE_STUNNEL is not set # BR2_PACKAGE_TCPDUMP is not set +# BR2_PACKAGE_DHCPDUMP is not set # BR2_PACKAGE_TFTPD is not set +# BR2_PACKAGE_LIGHTTPD is not set # BR2_PACKAGE_THTTPD is not set +# BR2_PACKAGE_TINYHTTPD is not set # BR2_PACKAGE_TN5250 is not set # BR2_PACKAGE_TTCP is not set +# BR2_PACKAGE_VPNC is not set # BR2_PACKAGE_VTUN is not set # BR2_PACKAGE_WGET is not set # BR2_PACKAGE_WIRELESS_TOOLS is not set @@ -369,20 +468,25 @@ BR2_BLOCKDEV_SUPPORT=y # BR2_PACKAGE_DM is not set # BR2_PACKAGE_DMRAID is not set # BR2_PACKAGE_E2FSPROGS is not set +# BR2_PACKAGE_GADGETFS_TEST is not set # BR2_PACKAGE_HAL is not set # BR2_PACKAGE_HDPARM is not set # BR2_PACKAGE_HOTPLUG is not set # BR2_PACKAGE_HWDATA is not set # BR2_PACKAGE_IOSTAT is not set +# BR2_PACKAGE_LIBAIO is not set # BR2_PACKAGE_LIBRAW1394 is not set # BR2_PACKAGE_LIBUSB is not set +# BR2_PACKAGE_LM_SENSORS is not set # BR2_PACKAGE_LVM2 is not set # BR2_PACKAGE_MDADM is not set # BR2_PACKAGE_MEMTESTER is not set # BR2_PACKAGE_MKDOSFS is not set BR2_PACKAGE_MTD=y -BR2_PACKAGE_MTD_EXPERIMENTAL=y -BR2_PACKAGE_MTD_ORIG_STRING="mtd_20060107.orig.tar.gz" +# BR2_PACKAGE_MTD_UTILS is not set +BR2_PACKAGE_MTD_20061007=y +# BR2_PACKAGE_MTD_20050122 is not set +# BR2_PACKAGE_MTD_SNAPSHOT is not set # # MTD tools selection @@ -419,11 +523,12 @@ BR2_PACKAGE_MTD_DOC_LOADBIOS=y # BR2_PACKAGE_WIPE is not set # BR2_PACKAGE_XFSPROGS is not set BR2_AUDIO_SUPPORT=y +# BR2_PACKAGE_ALSA_LIB is not set # BR2_PACKAGE_ASTERISK is not set # BR2_PACKAGE_AUMIX is not set -# BR2_PACKAGE_LIBID3TAG is not set # BR2_PACKAGE_LIBMAD is not set # BR2_PACKAGE_LIBSNDFILE is not set +# BR2_PACKAGE_LIBVORBIS is not set # BR2_PACKAGE_MADPLAY is not set # BR2_PACKAGE_MPG123 is not set BR2_GRAPHIC_SUPPORT=y @@ -444,47 +549,59 @@ BR2_GRAPHIC_SUPPORT=y # graphic libraries # # BR2_PACKAGE_DIRECTFB is not set +# BR2_PACKAGE_IMAGEMAGICK is not set # BR2_PACKAGE_JPEG is not set # BR2_PACKAGE_LIBPNG is not set +# BR2_PACKAGE_LIBUNGIF is not set # BR2_PACKAGE_SDL is not set # BR2_PACKAGE_TIFF is not set # -# other GUIs +# busybox graphic applications # -# BR2_PACKAGE_QTE is not set -# BR2_PACKAGE_QTOPIA4 is not set # -# X Window System server +# --> (May be broken in busybox) # -# BR2_PACKAGE_XORG is not set -# BR2_PACKAGE_TINYX is not set +# BR2_PACKAGE_FBV is not set +# BR2_PACKAGE_FBSET is not set + +# +# other GUIs +# +# BR2_PACKAGE_QTE is not set +# BR2_PACKAGE_QTOPIA4 is not set +BR2_PACKAGE_XSERVER_none=y +# BR2_PACKAGE_XSERVER_x11r7 is not set +# BR2_PACKAGE_XSERVER_xorg is not set +# BR2_PACKAGE_XSERVER_tinyx is not set +BR2_X11_PREFIX="/usr" # # X libraries and helper libraries # # BR2_PACKAGE_ATK is not set -# BR2_PACKAGE_CAIRO is not set # BR2_PACKAGE_PANGO is not set +# BR2_PACKAGE_LIBDRM is not set # BR2_PACKAGE_LIBGLIB12 is not set # BR2_PACKAGE_LIBGLIB2 is not set -# BR2_PACKAGE_LIBGTK12 is not set -# BR2_PACKAGE_LIBGTK2 is not set # BR2_PACKAGE_FONTCONFIG is not set # BR2_PACKAGE_FREETYPE is not set +# BR2_PACKAGE_TSLIB is not set # # X Window managers # -# BR2_PACKAGE_METACITY is not set +# BR2_PACKAGE_MATCHBOX is not set # # X applications # -# BR2_PACKAGE_DILLO is not set -# BR2_PACKAGE_RDESKTOP is not set -# BR2_PACKAGE_RXVT is not set + +# +# Video libraries/codecs and applications +# +# BR2_PACKAGE_MPLAYER is not set BR2_COMPRESSOR_SUPPORT=y # BR2_PACKAGE_GZIP is not set # BR2_PACKAGE_LZO is not set @@ -497,9 +614,10 @@ BR2_SCRIPTING_SUPPORT=y # BR2_PACKAGE_PYTHON is not set # BR2_PACKAGE_RUBY is not set # BR2_PACKAGE_TCL is not set +# BR2_PACKAGE_PHP is not set # -# Target Options +# Target filesystem options # # @@ -541,112 +659,54 @@ BR2_TARGET_ROOTFS_JFFS2_COPYTO="" # # -# Linux Options +# Kernel # +# BR2_KERNEL_none is not set +BR2_KERNEL_LINUX_ADVANCED=y +# BR2_KERNEL_LINUX is not set +# BR2_KERNEL_HURD is not set BR2_PACKAGE_LINUX=y -BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG=y +BR2_PACKAGE_LINUX_USE_KCONFIG=y BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config" -# BR2_LINUX_2_6_SNAP is not set -# BR2_LINUX_2_6_MM is not set +BR2_PACKAGE_LINUX_FORMAT="uImage" +BR2_KERNEL_CURRENT_VERSION="2.6.22" +BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/" # BR2_LINUX_2_6_STABLE is not set -# BR2_LINUX_2_6_22_1 is not set +# BR2_LINUX_2_6_23 is not set +# BR2_LINUX_2_6_22_10 is not set +BR2_LINUX_2_6_22_1=y # BR2_LINUX_2_6_22 is not set -# BR2_LINUX_2_6_21_6 is not set -# BR2_LINUX_2_6_21_1 is not set +# BR2_LINUX_2_6_21_7 is not set +# BR2_LINUX_2_6_21_5 is not set # BR2_LINUX_2_6_21 is not set -BR2_LINUX_2_6_20_4=y # BR2_LINUX_2_6_20 is not set -# BR2_LINUX_2_6_19_2 is not set -# BR2_LINUX_2_6_19 is not set -# BR2_LINUX_2_6_18 is not set -# BR2_LINUX_2_6_17 is not set -# BR2_LINUX_2_6_16 is not set -# BR2_LINUX_2_6_15 is not set -# BR2_LINUX_2_6_23 is not set -# BR2_LINUX_CUSTOM is not set +# BR2_LINUX26_CUSTOM is not set # # Patches # BR2_LINUX_BSP_PATCH="linux-2.6.20.4-atmel.patch.bz2" -BR2_DOWNLOAD_LINUX26_VERSION="2.6.20.4" -BR2_LINUX26_VERSION="2.6.20.4" -BR2_LINUX26_RC_PATCH="" -BR2_PACKAGE_LINUX_USE_KCONFIG=y -# BR2_LINUX26_DEFCONFIG is not set -# BR2_LINUX_CUSTOMIZE is not set +BR2_KERNEL_PREPATCHED=y +# BR2_KERNEL_BASE is not set +# BR2_KERNEL_LATEST is not set +BR2_DOWNLOAD_LINUX26_VERSION="2.6.22.1" +BR2_LINUX26_VERSION="2.6.22.1" + +# +# Linux Kernel Configuration +# +# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set +# BR2_PACKAGE_LINUX_USE_XCONFIG is not set # BR2_LINUX_BIN_BZIMAGE is not set -# BR2_LINUX_BIN_ZIMAGE is not set -# BR2_LINUX_BIN_VMLINUX is not set BR2_LINUX_BIN_UIMAGE=y +# BR2_LINUX_BIN_VMLINUX is not set +# BR2_LINUX_BIN_ZIMAGE is not set # BR2_LINUX_BIN_CUSTOM is not set -BR2_LINUX26_FORMAT="uImage" # # Destinations for linux kernel binaries # -# BR2_LINUX_IN_ROOTFS is not set -BR2_LINUX_COPY=y +# BR2_LINUX_COPYTO_ROOTFS is not set +BR2_LINUX_COPYTO_TFTPBOOT=y BR2_LINUX_COPYTO="/tftpboot" - -# -# Board Support Options -# -# BR2_TARGET_ARM is not set -BR2_TARGET_ATMEL=y - -# -# Atmel AT91 Specific Device Support -# -BR2_TARGET_AT91=y -# BR2_TARGET_AT91RM9200 is not set -BR2_TARGET_AT91SAM9260=y -# BR2_TARGET_AT91SAM9260A is not set -# BR2_TARGET_AT91SAM9261 is not set -# BR2_TARGET_AT91SAM9261S is not set -# BR2_TARGET_AT91SAM9262 is not set -# BR2_TARGET_AT91SAM9263 is not set -# BR2_TARGET_AT91SAM9XE is not set -# BR2_TARGET_AT91RM9200DF is not set -# BR2_TARGET_AT91RM9200SE is not set -# BR2_TARGET_AT91RM9200EK is not set -# BR2_TARGET_AT91RM9200DK is not set -BR2_TARGET_AT91SAM9260DFC=y -# BR2_TARGET_AT91SAM9260EK is not set -# BR2_TARGET_AT91SAM9261EK is not set -# BR2_TARGET_AT91SAM9262EK is not set -# BR2_TARGET_AT91SAM9263EK is not set -# BR2_TARGET_AT91SAM9XEEK is not set -BR2_BOARD_NAME="at91sam9260dfc" -BR2_TARGET_AT91_ADVANCED_INFO=y - -# -# Package support -# - -# -# Secondary locations -# -BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6" -BR2_TARGET_ATMEL_COPYTO="/tftpboot" -BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)" -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_SERVERIP="10.175.196.221" -BR2_TARGET_UBOOT_IPADDR="10.175.196.18" -BR2_TARGET_UBOOT_GATEWAY="10.175.196.1" -BR2_TARGET_UBOOT_NETMASK="255.255.255.0" -BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18" -BR2_TARGET_AT91BOOTSTRAP=y -# BR2_TARGET_AT91BOOT_DATAFLASH is not set -BR2_TARGET_AT91BOOT_DATAFLASHCARD=y -# BR2_TARGET_AT91BOOT_NANDFLASH is not set -# BR2_TARGET_AT91BOOT_FLASH is not set -BR2_TARGET_AT91BOOTSTRAP_MEMORY="dataflashcard" -# BR2_TARGET_SHARP is not set - -# -# Generic System Support -# -# BR2_TARGET_GENERIC_ACCESS_POINT is not set -# BR2_TARGET_GENERIC_FIREWALL is not set -# BR2_TARGET_GENERIC_DEV_SYSTEM is not set +BR2_LINUX_COPY_CONFIGURATION=y diff --git a/target/linux-experimental/Makefile.in b/target/linux-experimental/Makefile.in deleted file mode 100644 index ab9a6135d..000000000 --- a/target/linux-experimental/Makefile.in +++ /dev/null @@ -1,318 +0,0 @@ -############################################################# -# -# Linux kernel 2.6 target -# -############################################################# -ifneq ($(filter $(TARGETS),linux26),) - - -ifeq ($(LINUX_HEADERS_VERSION),) -# Version of Linux to download and then apply patches to -# XXX: andersee, i do not understand why we need this (BF) -DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION))) -# ")) -LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION))) -# ")) -LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH))) -# ")) -LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH))) -# " )) -MKIMAGE:=$(BUILD_DIR)/mkimage - -ifeq ($(DOWNLOAD_LINUX26_VERSION),) -DOWNLOAD_LINUX26_VERSION=2.6.19.2 -endif -# Version of Linux after applying any patches -LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION) - - -else # --------------------------------------------------- - -# Define DOWNLOAD_LINUX26_VERSION unless defined -ifeq ($(strip $(BR2_DOWNLOAD_LINUX26_VERSION)),) -DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION) -else -DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION))) -# ")) -endif - - -# Define LINUX26_VERSION unless defined -ifeq ($(strip $(BR2_LINUX26_VERSION)),) -LINUX26_VERSION=$(LINUX_HEADERS_VERSION) -else -LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION))) -# ")) -endif - -endif # --------------------------------------------------- - -# Handle case when we want to build using an "rc" patch -# Example: to build 2.6.21-rc1 you need to: -# * Download linux-2.6.20 -# * Apply patch-2.6.21-rc1 - -LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2 -LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6 -LINUX26_BZCAT:=$(BZCAT) - -# Linux kernel binary -LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT))) -# " )) - -# Linux kernel configuration file -ifeq ($(strip $(LINUX26_KCONFIG)),) -LINUX26_KCONFIG=$(BR2_BOARD_PATH)/linux26.config -endif - -# File name for the Linux kernel binary -ifeq ($(strip $(LINUX26_KERNEL)),) -#LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH) -LINUX26_KERNEL:=$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz -endif - -ifeq ($(strip $(LINUX26_BINLOC)),) -LINUX26_BINLOC=$(LINUX26_FORMAT) -endif - -# Put binary in root file system -ifeq ($(strip $(BR2_LINUX_IN_ROOTFS)),y) -ifeq ($(strip $(LINUX26_TARGET)),) -LINUX26_TARGET:=$(TARGET_DIR)/boot/$(LINUX26_BINLOC) -endif -else -LINUX26_TARGET:=$(BINARIES_DIR)/$(LINUX26_KERNEL) -endif -endif - -ifeq ($(strip $(LINUX26_BUILD_DIR)),) -LINUX26_BUILD_DIR=$(PROJECT_BUILD_DIR) -endif - -ifeq ($(strip $(BR2_LINUX26_DEFCONFIG)),y) -LINUX26_DEFCONFIG=$(BOARD_NAME)_defconfig -endif - -# Version of Linux AFTER patches -LINUX26_DIR=$(LINUX26_BUILD_DIR)/linux-$(LINUX26_VERSION) - -# for packages that need it -LINUX_VERSION=$(LINUX26_VERSION) -LINUX_DIR=$(LINUX26_DIR) -LINUX_KERNEL=$(LINUX26_KERNEL) - -# kernel patches -ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),) -# "))) -LINUX26_PATCH_DIR:=$(BR2_BOARD_PATH)/kernel-patches/ -endif -PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR))) -# " )) - -LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \ - PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \ - CROSS_COMPILE=$(KERNEL_CROSS) - -$(LINUX26_KCONFIG): - @if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \ - echo ""; \ - echo "You should create a .config for your kernel"; \ - echo "and install it as $(LINUX26_KCONFIG)"; \ - echo ""; \ - sleep 5; \ - fi - -# Check if we have a release candidate. -# This makes life complex -# To build linux-2.6.21-rc2 you need to: -# * Download linux.2.6.20.tar.bz2 -# * Download patch-2.6.21-rc2.bz2 -# I:E you have to download the *previous* major version - -ifneq ($(LINUX26_RC_PATCH),) -# We have a "release candidate" -LINUX26_RC_PATCH_SOURCE:=$(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH) - -# Create rule to download the patch -$(LINUX26_RC_PATCH_SOURCE): - mkdir -p $(PROJECT_BUILD_DIR)/linux-patch/ - $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH) -# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2 -else -# We have a vanilla style linux kernel -LINUX26_RC_PATCH_SOURCE:= -endif - -ifneq ($(strip $(LINUX_HEADERS_SOURCE)),$(strip $(LINUX26_SOURCE))) -$(DL_DIR)/$(LINUX26_SOURCE): - $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE) -endif - -$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE) $(LINUX26_RC_PATCH_SOURCE) - rm -rf $(LINUX26_DIR) - $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(LINUX26_BUILD_DIR) $(TAR_OPTIONS) - -ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION)) - # Rename the dir from the downloaded version to the AFTER patch version - mv -f $(LINUX26_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR) -endif -ifneq ($(LINUX26_RC_PATCH),) - -(cd $(LINUX26_DIR); $(LINUX26_BZCAT) $(LINUX26_RC_PATCH_SOURCE) | patch -p1) -endif - -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX26_DIR) linux) - rm -f $(LINUX26_DIR)/.kernelrelease - echo $(LINUX26_VERSION) > $(LINUX26_DIR)/.kernelrelease - touch $@ - -$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked - echo $(PATCH_DIR) - toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) - touch $@ - -$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG) - -ls -l $(LINUX26_DIR)/.patched - -ls -l $(LINUX26_KCONFIG) - -ls -l $(LINUX26_DIR)/.configured - -ls -l $(LINUX26_DIR)/.unpacked - -ls -l $(DL_DIR)/$(LINUX26_SOURCE) - -ls -l $(LINUX26_RC_PATCH_SOURCE) -ifeq ($(strip $(BR2_LINUX26_DEFCONFIG)),y) - make ARCH=$(ARCH) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig -else - cp -df --preserve=mode,ownership $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config -endif -ifeq ($(strip $(BR2_LINUX_CUSTOMIZE)),y) - make -C $(LINUX26_DIR) xconfig -endif - $(SED) '/CONFIG_AEABI/d' $(LINUX26_DIR)/.config -ifeq ($(BR2_ARM_EABI),y) - echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config - $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config - echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config -else - echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config -endif - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig include/linux/version.h - touch $@ - -$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare - touch $@ - -$(LINUX26_DIR)/arch/$(ARCH)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/vmlinux - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT) - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules - touch -c $@ - -$(LINUX26_DIR)/vmlinux: $(LINUX26_DIR)/.depend_done $(STAGING_DIR)/include/linux/version.h - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) vmlinux - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules - touch -c $@ - - - -#----------------------------------------------------------------------------------- -# Rule can be enabled by setting -# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC) -# -$(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT) - [ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot - cp -a $(LINUX26_DIR)/$(LINUX26_FORMAT) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/$(LINUX26_FORMAT) - touch -c $@ - -#----------------------------------------------------------------------------------- -# Rule can be enabled by setting -# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL) -# LINUX26_FORMAT:= vmlinux - -$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage - cp -dpf $(LINUX26_DIR)/uImage $(BINARIES_DIR)/$(LINUX26_KERNEL) - cp -dpf $(LINUX26_DIR)/uImage /tftpboot/$(LINUX26_KERNEL) - mkdir -p $(TARGET_DIR)/boot/ - cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config - cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config - cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config - -$(PROJECT_BUILD_DIR)/linux.bin: $(LINUX26_DIR)/vmlinux - ${KERNEL_CROSS}objcopy -O binary -S $(LINUX26_DIR)/vmlinux $(PROJECT_BUILD_DIR)/linux.bin - -$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage - cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage - - -$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE) - gzip -v9 -c $(PROJECT_BUILD_DIR)/linux.bin > $(PROJECT_BUILD_DIR)/linux.bin.gz - $(MKIMAGE) -A $(ARCH) \ - -O linux \ - -C gzip \ - -a 0x20008000 \ - -e 0x20008000 \ - -d $(PROJECT_BUILD_DIR)/linux.bin.gz \ - $(LINUX26_DIR)/uImage - rm -f $(PROJECT_BUILD_DIR)/linux.bin.gz -#----------------------------------------------------------------------------------- - -$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_TARGET) $(TARGET_DIR)/sbin/modprobe $(LINUX26_DIR)/vmlinux - rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION) - rm -f $(TARGET_DIR)/sbin/cardmgr - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \ - DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \ - INSTALL_MOD_PATH=$(TARGET_DIR) modules_install - (cd $(TARGET_DIR)/lib/modules; \ - rm -f drivers; \ - ln -s $(LINUX26_VERSION)/kernel/drivers .) - chmod a+x target/depmod.pl - target/depmod.pl \ - -b $(TARGET_DIR)/lib/modules/$(DOWNLOAD_LINUX26_VERSION) \ - -k $(LINUX26_DIR)/vmlinux \ - -F $(LINUX26_DIR)/System.map \ - > $(TARGET_DIR)/lib/modules/$(shell cat $(LINUX26_DIR)/include/config/kernel.release 2> /dev/null)/modules.dep - rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build - touch -c $@ - -$(STAGING_DIR)/include/linux/version.h: $(LINUX26_DIR)/.configured - mkdir -p $(STAGING_DIR)/include - tar -ch -C $(LINUX26_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/ - tar -ch -C $(LINUX26_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/ - -linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed - [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config - $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig - -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured - -linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep $(LINUX26_TARGET) - -linux26-source: $(DL_DIR)/$(LINUX26_SOURCE) - -# This has been renamed so we do _NOT_ by default run this on 'make clean' -linux26clean: - rm -f $(LINUX26_TARGET) - rm -f $(PROJECT_BUILD_DIR)/linux.bin - rm -f $(LINUX26_DIR)/uImage - -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean - -linux26-dirclean: - rm -f $(LINUX26_TARGET) - rm -f $(PROJECT_BUILD_DIR)/linux.bin - rm -rf $(LINUX26_DIR) - -linux-update: - cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG) - -linux-test: - @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION) - @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX) - @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) - @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION) - @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH) - @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH) - @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION) - @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION) - @echo "LINUX26_VERSION" $(LINUX26_VERSION) - @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH) - @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG) - @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG) - @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM) - @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT) - @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS) - @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1) - diff --git a/target/linux/Config.in b/target/linux/Config.in index 4402381bb..c79fca2dd 100644 --- a/target/linux/Config.in +++ b/target/linux/Config.in @@ -1,28 +1,6 @@ #comment "Linux kernel options" -config BR2_PACKAGE_LINUX - bool "linux kernel" - depends on BR2_KERNEL_LINUX - default y - help - The Linux kernel. - http://www.kernel.org/ - - Note: Requires kernel-headers >= 2.6.19 since the other - kernel headers are just that (headers) and not full - kernels. This is a feature. - -config BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG - bool "linux kernel experimental configuration" - depends on BR2_PACKAGE_LINUX - depends on BR2_TARGET_ATMEL - default n - help - More advanced configuration (in development) - - - -if ! BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG +if BR2_KERNEL_LINUX config BR2_PACKAGE_LINUX_KCONFIG string ".config file" depends on BR2_PACKAGE_LINUX @@ -53,350 +31,3 @@ config BR2_PACKAGE_LINUX_FORMAT board-imposed value by passing LINUX26_FORMAT= to make. endif - -if BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG - -choice - prompt "Linux Kernel Version" - depends on BR2_PACKAGE_LINUX - default BR2_LINUX_2_6_22_1 if !BR2_avr32 - default BR2_LINUX_2_6_22_10 if BR2_avr32 - help - Select the specific Linux version you want to use - -config BR2_LINUX_2_6_SNAP - bool "The latest snapshot for the stable Linux kernel" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.x-git# - -config BR2_LINUX_2_6_MM - bool "With latest -mm patch for the stable Linux kernel" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.x-rc#-mm# - -config BR2_LINUX_2_6_STABLE - bool "The latest stable Linux kernel (2.6.22.1)" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.22.1 - -config BR2_LINUX_2_6_22_10 - bool "Linux 2.6.22.10" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.22.10 - -config BR2_LINUX_2_6_22_1 - bool "Linux 2.6.22.1" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.22.1 - -config BR2_LINUX_2_6_22 - bool "Linux 2.6.22" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.22 - -config BR2_LINUX_2_6_21_6 - bool "Linux 2.6.21.6" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.21.6 - -config BR2_LINUX_2_6_21_1 - bool "Linux 2.6.21.1" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.21.1 - -config BR2_LINUX_2_6_21 - bool "Linux 2.6.21" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.21 - -config BR2_LINUX_2_6_20_4 - bool "Linux 2.6.20.4" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.20.4 - -config BR2_LINUX_2_6_20 - bool "Linux 2.6.20" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.20 - -config BR2_LINUX_2_6_19_2 - bool "Linux 2.6.19.2" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.19.2 - -config BR2_LINUX_2_6_19 - bool "Linux 2.6.19" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.19 - -config BR2_LINUX_2_6_18 - bool "Linux 2.6.18" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.18 - -config BR2_LINUX_2_6_17 - bool "Linux 2.6.17" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.17 - -config BR2_LINUX_2_6_16 - bool "Linux 2.6.16" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.16 - -config BR2_LINUX_2_6_15 - bool "Linux 2.6.15" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.15 - -config BR2_LINUX_2_6_23 - bool "Linux 2.6.23" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.23 - -config BR2_LINUX_CUSTOM - bool "Linux version" - depends BR2_PACKAGE_LINUX - help - Linux - -endchoice - -config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION - string "Linux Tarball version" - depends on BR2_LINUX_CUSTOM - default "linux-2.6.22" - -config BR2_CUSTOM_LINUX26_VERSION - string "Linux Version" - depends on BR2_LINUX_CUSTOM - default "linux-2.6.22-version" - -config BR2_CUSTOM_LINUX26_RC_PATCH - string "RC patch (if needed)" - depends on BR2_LINUX_CUSTOM - default "patch-2.6.22-rc6-mm1.bz2" - -menu "Patches" - depends on BR2_PACKAGE_LINUX - -config BR2_LINUX_BSP_PATCH - string "Additional patch to apply (supply full path)" - default "" - -endmenu - -config BR2_DOWNLOAD_LINUX26_VERSION - string #"Selected Tarball:" - default "2.6.15" if BR2_LINUX_2_6_15 - default "2.6.16" if BR2_LINUX_2_6_16 - default "2.6.17" if BR2_LINUX_2_6_17 - default "2.6.18" if BR2_LINUX_2_6_18 - default "2.6.19" if BR2_LINUX_2_6_19 - default "2.6.19.2" if BR2_LINUX_2_6_19_2 - default "2.6.20" if BR2_LINUX_2_6_20 - default "2.6.20.4" if BR2_LINUX_2_6_20_4 - default "2.6.21" if BR2_LINUX_2_6_21 - default "2.6.21.1" if BR2_LINUX_2_6_21_1 - default "2.6.21.6" if BR2_LINUX_2_6_21_6 - default "2.6.22" if BR2_LINUX_2_6_22 - default "2.6.22.1" if BR2_LINUX_2_6_22_1 - default "2.6.22.10" if BR2_LINUX_2_6_22_10 - default "2.6.22" if BR2_LINUX_2_6_23_RC1 - default "2.6.22" if BR2_LINUX_2_6_SNAP - default "2.6.22" if BR2_LINUX_2_6_MM - default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX_CUSTOM - -config BR2_LINUX26_VERSION - string #"Selected Version:" - default "2.6.15" if BR2_LINUX_2_6_15 - default "2.6.16" if BR2_LINUX_2_6_16 - default "2.6.17" if BR2_LINUX_2_6_17 - default "2.6.18" if BR2_LINUX_2_6_18 - default "2.6.19" if BR2_LINUX_2_6_19 - default "2.6.19.2" if BR2_LINUX_2_6_19_2 - default "2.6.20" if BR2_LINUX_2_6_20 - default "2.6.20.4" if BR2_LINUX_2_6_20_4 - default "2.6.21" if BR2_LINUX_2_6_21 - default "2.6.21.1" if BR2_LINUX_2_6_21_1 - default "2.6.21.6" if BR2_LINUX_2_6_21_6 - default "2.6.22" if BR2_LINUX_2_6_22 - default "2.6.22.1" if BR2_LINUX_2_6_22_1 - default "2.6.22.10" if BR2_LINUX_2_6_22_10 - default "2.6.22" if BR2_LINUX_2_6_23_RC1 - default "2.6.22" if BR2_LINUX_2_6_SNAP - default "2.6.22" if BR2_LINUX_2_6_MM - default $(BR2_CUSTOM_LINUX26_VERSION) if BR2_LINUX_CUSTOM - -config BR2_LINUX26_RC_PATCH - string #"Selected Patch:" - default "" if BR2_LINUX_2_6_15 - default "" if BR2_LINUX_2_6_16 - default "" if BR2_LINUX_2_6_17 - default "" if BR2_LINUX_2_6_18 - default "" if BR2_LINUX_2_6_19 - default "" if BR2_LINUX_2_6_19_2 - default "" if BR2_LINUX_2_6_20 - default "" if BR2_LINUX_2_6_20_4 - default "" if BR2_LINUX_2_6_21 - default "" if BR2_LINUX_2_6_21_1 - default "" if BR2_LINUX_2_6_21_6 - default "" if BR2_LINUX_2_6_22 - default "" if BR2_LINUX_2_6_22_1 - default "" if BR2_LINUX_2_6_22_10 - default "patch-2.6.23-rc1.bz2" if BR2_LINUX_2_6_23_RC1 - default $(BR2_CUSTOM_LINUX26_RC_PATCH) if BR2_LINUX_CUSTOM - -choice - prompt "Linux Kernel Configuration" - depends on BR2_PACKAGE_LINUX - default BR2_PACKAGE_LINUX_USE_KCONFIG - help - Select the way to configure the Linux - -config BR2_PACKAGE_LINUX_USE_KCONFIG - bool ".config file" - depends on BR2_PACKAGE_LINUX - help - kernel's .config to use to build a kernel for the target. - - If the above setting is empty, you can change the default - board-imposed value by passing LINUX26_KCONFIG= to - make. - -config BR2_LINUX26_DEFCONFIG - bool "Run make _defconfig " - depends BR2_PACKAGE_LINUX - help - Configure Linux by make _defconfig - -config BR2_LINUX_CUSTOMIZE - bool "Run make ARCH=$(ARCH) xconfig before build" - depends BR2_PACKAGE_LINUX - help - Configure Linux by make xconfig -endchoice - -config BR2_PACKAGE_LINUX_KCONFIG - string ".config file" - depends on BR2_PACKAGE_LINUX_USE_KCONFIG - default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config" - help - kernel's .config to use to build a kernel for the target. - - If the above setting is empty, you can change the default - board-imposed value by passing LINUX26_KCONFIG= to - make. - -choice - prompt "kernel binary format" - depends on BR2_PACKAGE_LINUX - default BR2_LINUX_BIN_UIMAGE - help - Select the specific Linux binary type you want to use - -config BR2_LINUX_BIN_BZIMAGE - bool "bzImage" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.19.2 - -config BR2_LINUX_BIN_UIMAGE - bool "uImage" - depends BR2_PACKAGE_LINUX - help - Build uImage binary - -config BR2_LINUX_BIN_VMLINUX - bool "vmlinux" - depends BR2_PACKAGE_LINUX - help - Build vmlinux binary - -config BR2_LINUX_BIN_ZIMAGE - bool "zImage" - depends BR2_PACKAGE_LINUX - help - Linux 2.6.19.2 - -config BR2_LINUX_BIN_CUSTOM - bool " Linux binary" - depends BR2_PACKAGE_LINUX - help - Build custom Linux binary format -endchoice - -config BR2_LINUX_BIN_CUSTOM_BIN - string "custom kernel binary format" - depends on BR2_LINUX_BIN_CUSTOM - default "" - help - Which Linux binary format? - -config BR2_PACKAGE_LINUX_FORMAT - string #"kernel binary format" - depends on BR2_PACKAGE_LINUX - default "bzImage" if BR2_LINUX_BIN_BZIMAGE - default "uImage" if BR2_LINUX_BIN_UIMAGE - default "vmlinux" if BR2_LINUX_BIN_VMLINUX - default "zImage" if BR2_LINUX_BIN_ZIMAGE - default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM - help - kernel binary format. - Popular values include: - - bzImage - - zImage - - vmlinux - - zImage - - xipImage - and other, architecture dependant formats. - - Note that the default format is supposed to be set by your - board-description, if any. - i386 and compatible default to bzImage if nothing was given - above. - If the above setting is empty, you can change the default - board-imposed value by passing LINUX26_FORMAT= to - make. - -comment "Destinations for linux kernel binaries" - depends on BR2_PACKAGE_LINUX - -config BR2_LINUX_IN_ROOTFS - bool "Copy kernel to root file system" - depends BR2_PACKAGE_LINUX - default n - help - Copy kernel to /boot directory - -menuconfig BR2_LINUX_COPY - bool "Secondary Copy" - depends on BR2_PACKAGE_LINUX - default y - -config BR2_LINUX_COPYTO - string "also copy the image to..." - depends BR2_LINUX_COPY - default "/tftpboot" - help - Copy kernel to secondary location - -endif diff --git a/target/linux/Config.in.advanced b/target/linux/Config.in.advanced new file mode 100644 index 000000000..3b3085a22 --- /dev/null +++ b/target/linux/Config.in.advanced @@ -0,0 +1,501 @@ +if BR2_KERNEL_LINUX_ADVANCED +# --- "Linux kernel options" +# This file exports the following symbols for use by Makefile's +# +# BR2_PACKAGE_LINUX +# +# BR2_KERNEL_SITE +# BR2_DOWNLOAD_LINUX26_VERSION +# BR2_LINUX26_VERSION +# +# BR2_KERNEL_PATCH_SITE +# BR2_KERNEL_PATCH +# +# BR2_LINUX26_CUSTOM +# BR2_CUSTOM_LINUX26_PATCH_SITE +# BR2_CUSTOM_LINUX26_PATCH +# +# BR2_LINUX_BSP_PATCH +# +# BR2_PACKAGE_LINUX_USE_KCONFIG +# BR2_PACKAGE_LINUX_USE_DEFCONFIG +# BR2_PACKAGE_LINUX_USE_XCONFIG +# BR2_PACKAGE_LINUX_KCONFIG +# +# BR2_PACKAGE_LINUX_FORMAT +# +# BR2_LINUX_COPYTO_ROOTFS +# BR2_LINUX_COPYTO_TFTPBOOT +# BR2_LINUX_COPYTO +# +# --------------------------------------------------------------------------- +# --- These 'constants' requires regular maintenance, so put them first +config BR2_KERNEL_PATCH_LEVEL + string + default "1" if BR2_LINUX_2_6_23 && BR2_KERNEL_ADD_LATEST_MINORPATCH + default "10" if BR2_LINUX_2_6_22 && BR2_KERNEL_ADD_LATEST_MINORPATCH + default "7" if BR2_LINUX_2_6_21 && BR2_KERNEL_ADD_LATEST_MINORPATCH + default "20" if BR2_LINUX_2_6_20 && BR2_KERNEL_ADD_LATEST_MINORPATCH + default "$(BR2_KERNEL_MINORLEVEL)" if BR2_KERNEL_ADD_MINORPATCH + +config BR2_KERNEL_CURRENT_VERSION + string + default "2.6.23.1" + +config BR2_KERNEL_NEXT_VERSION + string + default "2.6.24" if BR2_LINUX_2_6_23 + default "2.6.23" if BR2_LINUX_2_6_22 + default "2.6.22" if BR2_LINUX_2_6_21 + default "2.6.21" if BR2_LINUX_2_6_20 + +config BR2_KERNEL_THIS_VERSION + string + default "2.6.23" if BR2_LINUX_2_6_23 + default "2.6.22" if BR2_LINUX_2_6_22 + default "2.6.21" if BR2_LINUX_2_6_21 + default "2.6.20" if BR2_LINUX_2_6_20 + +config LINUX26_LATEST_RC_VERSION + string + default "2.6.23" if BR2_KERNEL_ADD_LATEST_RC_PATCH + +config LINUX26_LATEST_MM_VERSION + string + default "2.6.23-mm1" if BR2_KERNEL_ADD_LATEST_MM_PATCH + +config LINUX26_LATEST_GIT_VERSION + string + default "2.6.23-git3" if BR2_KERNEL_ADD_LATEST_SNAPSHOT + +config BR2_KERNEL_SITE + string + default "http://ftp.kernel.org/pub/linux/kernel/v2.6/" + +config BR2_MM_PATCH_SITE + string + default "http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6" + +config BR2_MM_PATCH_DIR + string + default "$(BR2_DOWNLOAD_LINUX26_VERSION)/$(LINUX26_LATEST_MM_VERSION)" if BR2_KERNEL_ADD_LATEST_MM_PATCH + default "$(BR2_DOWNLOAD_LINUX26_VERSION)/$(BR2_LINUX26_MM_VERSION)" if BR2_KERNEL_ADD_MM_PATCH + +config BR2_RC_MM_PATCH_DIR + string + default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)" + +config BR2_KERNEL_PATCH_SITE + string + default "http://ftp.kernel.org/pub/linux/kernel/v2.6/" if BR2_KERNEL_ADD_MINORPATCH + default "http://ftp.kernel.org/pub/linux/kernel/v2.6/testing/" if BR2_KERNEL_ADD_RC_PATCH || BR2_KERNEL_ADD_LATEST_RC_PATCH + default "http://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/" if BR2_KERNEL_ADD_SNAPSHOT || BR2_KERNEL_ADD_LATEST_SNAPSHOT + default "$(BR2_MM_PATCH_SITE)/$(BR2_MM_PATCH_DIR)/" if BR2_KERNEL_ADD_MM_PATCH || BR2_KERNEL_ADD_LATEST_MM_PATCH + default $(BR2_CUSTOM_LINUX26_PATCH_SITE) if BR2_LINUX26_CUSTOM + +config BR2_LINUX26_RC_VERSION + string + default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)" if BR2_KERNEL_ADD_RC_PATCH + +config BR2_LINUX26_SNAPSHOT_VERSION + string + default "$(BR2_KERNEL_THIS_VERSION)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT + +config BR2_LINUX26_RC_SNAPSHOT_VERSION + string + default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT + +config BR2_LINUX26_MM_VERSION + string + default "$(BR2_KERNEL_THIS_VERSION)-mm$(BR2_KERNEL_MM_LEVEL)" if BR2_KERNEL_ADD_MM_PATCH + +config BR2_LINUX26_RC_MM_VERSION + string + default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)" if BR2_KERNEL_ADD_MM_PATCH + +# --------------------------------------------------------------------------- + +choice + prompt "Linux Kernel Version" + default BR2_LINUX_2_6_22_10 if BR2_avr32 + default BR2_LINUX_2_6_22_1 if !BR2_avr32 && BR2_TARGET_ATMEL + default BR2_LINUX_2_6_22 if !BR2_TARGET_ATMEL + help + Select the specific Linux version you want to use + +config BR2_LINUX_2_6_STABLE + bool "The latest stable Linux kernel (2.6.23)" + help + Linux 2.6.23 + +config BR2_LINUX_2_6_23 + bool "Linux 2.6.23" + select BR2_KERNEL_BASE + help + Linux 2.6.23 + +config BR2_LINUX_2_6_22_10 + bool "Linux 2.6.22.10" + select BR2_KERNEL_PREPATCHED + help + Linux 2.6.22.10 + +config BR2_LINUX_2_6_22_1 + bool "Linux 2.6.22.1" + select BR2_KERNEL_PREPATCHED + help + Linux 2.6.22.1 + +config BR2_LINUX_2_6_22 + bool "Linux 2.6.22" + select BR2_KERNEL_LATEST + select BR2_KERNEL_BASE + help + Linux 2.6.22 + +config BR2_LINUX_2_6_21_7 + bool "Linux 2.6.21.7" + select BR2_KERNEL_PREPATCHED + help + Linux 2.6.21.1 + +config BR2_LINUX_2_6_21_5 + bool "Linux 2.6.21.5" + select BR2_KERNEL_PREPATCHED + help + Linux 2.6.21.5 + +config BR2_LINUX_2_6_21 + bool "Linux 2.6.21" + select BR2_KERNEL_BASE + help + Linux 2.6.21 + +config BR2_LINUX_2_6_20 + bool "Linux 2.6.20" + select BR2_KERNEL_BASE + help + Linux 2.6.20 + +config BR2_LINUX26_CUSTOM + bool "Linux version" + help + Linux + +endchoice + +if BR2_LINUX26_CUSTOM +config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION + string "Linux Tarball version" + default "linux-2.6.22" + help + Specify any .tar.bz2 file + +config BR2_CUSTOM_LINUX26_VERSION + string "Linux Version" + default "linux-2.6.22-version" + help + Specify what the linux version will be called + +config BR2_CUSTOM_LINUX26_PATCH + string "patch name" + default "patch-2.6.22-rc6-mm1.bz2" + help + Specify a patch to be downloaded + +config BR2_CUSTOM_LINUX26_PATCH_SITE + string "patch site" + default "http://" + help + Specify from where the patch will be downloaded. + +endif + +# ----------------------------------------------- + +menu "Patches" + depends on BR2_PACKAGE_LINUX + +choice + prompt "Add a patch to the Linux Kernel" + depends on BR2_PACKAGE_LINUX + depends on !BR2_KERNEL_PREPATCHED + default BR2_KERNEL_ADD_NO_PATCH + help + Select a patch to add to the Linux kernel + +config BR2_KERNEL_ADD_NO_PATCH + bool "Do not add a patch" + +config BR2_KERNEL_ADD_LATEST_MINORPATCH + bool "Add _latest_ '.#' minor patch" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_MINORPATCH + bool "Add a '.#' minor patch" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_LATEST_RC_PATCH + bool "Add _latest_ '-rc#' patch" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_RC_PATCH + bool "Add an '-rc#' patch" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_LATEST_SNAPSHOT + bool "Add _latest_ 'snapshot' patch" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_SNAPSHOT + bool "Add a 'snapshot' patch (linux-2.6.X-rc#-git#)" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_LATEST_MM_PATCH + bool "Add latest '-mm' patch for the stable linux kernel" + select BR2_KERNEL_ADD_PATCH + +config BR2_KERNEL_ADD_MM_PATCH + bool "Add an '-mm#' patch for the stable linux kernel" + select BR2_KERNEL_ADD_PATCH + +endchoice + +config BR2_KERNEL_ADD_PATCH + bool + default n + + +config BR2_KERNEL_MINORLEVEL + string "patch level" + default "" + depends on BR2_KERNEL_ADD_MINORPATCH + +config BR2_KERNEL_RC_LEVEL + string "-rc patch Level" + default "" + depends on BR2_KERNEL_ADD_RC_PATCH || BR2_KERNEL_ADD_SNAPSHOT + +config BR2_KERNEL_GIT_LEVEL + string "-git patch Level" + default "" + depends on BR2_KERNEL_ADD_SNAPSHOT + +config BR2_KERNEL_MM_LEVEL + string "-mm patch Level" + default "" + depends on BR2_KERNEL_ADD_MM_PATCH + +config BR2_LINUX_BSP_PATCH + string "Additional patch to apply (from \$(DL_DIR))" + default "" + help + Apply a patch located in \$(DL_DIR). + You need to download or create this before + enable this option + +config BR2_KERNEL_PATCH + string + default "patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2" if BR2_KERNEL_ADD_MINORPATCH || BR2_KERNEL_ADD_LATEST_MINORPATCH + default "patch-$(LINUX26_LATEST_RC_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_RC_PATCH + default "patch-$(BR2_LINUX26_RC_VERSION).bz2" if BR2_KERNEL_ADD_RC_PATCH + default "patch-$(LINUX26_LATEST_GIT_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_SNAPSHOT + default "patch-$(BR2_LINUX26_SNAPSHOT_VERSION).bz2" if BR2_KERNEL_ADD_SNAPSHOT + default "$(LINUX26_LATEST_MM_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_MM_PATCH + default "$(BR2_LINUX26_MM_VERSION).bz2" if BR2_KERNEL_ADD_MM_PATCH + default $(BR2_CUSTOM_LINUX26_PATCH) if BR2_LINUX26_CUSTOM + +endmenu + +# ----------------------------------------------- + +config BR2_KERNEL_PREPATCHED + bool + default n + +config BR2_KERNEL_BASE + bool + default n + +config BR2_KERNEL_LATEST + bool + default n + +config BR2_DOWNLOAD_LINUX26_VERSION + string + default "$(BR2_KERNEL_THIS_VERSION)" if BR2_KERNEL_BASE + default "2.6.21.5" if BR2_LINUX_2_6_21_5 + default "2.6.21.7" if BR2_LINUX_2_6_21_7 + default "2.6.22.1" if BR2_LINUX_2_6_22_1 + default "2.6.22.10" if BR2_LINUX_2_6_22_10 + default "$(BR2_KERNEL_CURRENT_VERSION)"if BR2_LINUX_2_6_STABLE + default "$(BR2_DEFAULT_KERNEL_HEADERS)" if BR2_KERNEL_LINUX_HEADERS_VERSION + default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX26_CUSTOM + +config BR2_LINUX26_VERSION + string + default "$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_MINORPATCH + default "$(LINUX26_LATEST_RC_VERSION)" if BR2_KERNEL_ADD_LATEST_RC_PATCH + default "$(LINUX26_LATEST_MM_VERSION)" if BR2_KERNEL_ADD_LATEST_MM_PATCH + default "$(LINUX26_LATEST_GIT_VERSION)" if BR2_KERNEL_ADD_LATEST_SNAPSHOT + default "$(BR2_LINUX26_RC_VERSION)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_RC_PATCH + default "$(BR2_LINUX26_SNAPSHOT_VERSION)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_SNAPSHOT + default "$(BR2_LINUX26_MM_VERSION)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_MM_PATCH + default "$(BR2_KERNEL_THIS_VERSION)" if BR2_KERNEL_BASE && ! BR2_KERNEL_ADD_PATCH + default "2.6.21.5" if BR2_LINUX_2_6_21_5 + default "2.6.21.7" if BR2_LINUX_2_6_21_7 + default "2.6.22.1" if BR2_LINUX_2_6_22_1 + default "2.6.22.10" if BR2_LINUX_2_6_22_10 + default "$(BR2_KERNEL_CURRENT_VERSION)"if BR2_LINUX_2_6_STABLE + default $(BR2_CUSTOM_LINUX26_VERSION) if BR2_LINUX26_CUSTOM + +menu "Linux Kernel Configuration" + +choice + prompt "Linux Kernel Configuration" + depends on BR2_PACKAGE_LINUX + default BR2_PACKAGE_LINUX_USE_KCONFIG + help + Select the way to configure the Linux + +config BR2_PACKAGE_LINUX_USE_KCONFIG + bool ".config file" + depends on BR2_PACKAGE_LINUX + help + kernel's .config to use to build a kernel for the target. + + If the above setting is empty, you can change the default + board-imposed value by passing LINUX26_KCONFIG= to + make. + +config BR2_PACKAGE_LINUX_USE_DEFCONFIG + bool "Run make _defconfig " + depends BR2_PACKAGE_LINUX + help + Configure Linux by make _defconfig + +config BR2_PACKAGE_LINUX_USE_XCONFIG + bool "Run make ARCH=$(ARCH) xconfig before build" + depends BR2_PACKAGE_LINUX + help + Configure Linux by make xconfig +endchoice + +config BR2_PACKAGE_LINUX_KCONFIG + string ".config file" + depends on BR2_PACKAGE_LINUX_USE_KCONFIG + default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX26_VERSION).config" + help + kernel's .config to use to build a kernel for the target. + + If the above setting is empty, you can change the default + board-imposed value by passing LINUX26_KCONFIG= to + make. + +endmenu + +choice + prompt "kernel binary format" + depends on BR2_PACKAGE_LINUX + default BR2_LINUX_BIN_UIMAGE + help + Select the specific Linux binary type you want to use + +config BR2_LINUX_BIN_BZIMAGE + bool "bzImage" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.19.2 + +config BR2_LINUX_BIN_UIMAGE + bool "uImage" + depends BR2_PACKAGE_LINUX + help + Build uImage binary + +config BR2_LINUX_BIN_VMLINUX + bool "vmlinux" + depends BR2_PACKAGE_LINUX + help + Build vmlinux binary + +config BR2_LINUX_BIN_ZIMAGE + bool "zImage" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.19.2 + +config BR2_LINUX_BIN_CUSTOM + bool " Linux binary" + depends BR2_PACKAGE_LINUX + help + Build custom Linux binary format +endchoice + +config BR2_LINUX_BIN_CUSTOM_BIN + string "custom kernel binary format" + depends on BR2_LINUX_BIN_CUSTOM + default "" + help + Which Linux binary format? + +config BR2_PACKAGE_LINUX_FORMAT + string #"kernel binary format" + depends on BR2_PACKAGE_LINUX + default "bzImage" if BR2_LINUX_BIN_BZIMAGE + default "uImage" if BR2_LINUX_BIN_UIMAGE + default "vmlinux" if BR2_LINUX_BIN_VMLINUX + default "zImage" if BR2_LINUX_BIN_ZIMAGE + default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM + help + kernel binary format. + Popular values include: + - bzImage + - zImage + - vmlinux + - zImage + - xipImage + and other, architecture dependant formats. + + Note that the default format is supposed to be set by your + board-description, if any. + i386 and compatible default to bzImage if nothing was given + above. + If the above setting is empty, you can change the default + board-imposed value by passing LINUX26_FORMAT= to + make. + +menu "Destinations for linux kernel binaries" + +config BR2_LINUX_COPYTO_ROOTFS + bool "Copy kernel to root file system" + depends BR2_PACKAGE_LINUX + default n + help + Copy kernel to /boot directory + +config BR2_LINUX_COPYTO_TFTPBOOT + bool "Copy kernel to /tftpboot" + default y if BR2_TARGET_ATMEL + default n if !BR2_TARGET_ATMEL + help + Copy kernel to /tftpboot directory + +config BR2_LINUX_COPYTO + string "Copy kernel to ..." + default "" + help + Copy kernel to secondary location + +endmenu + +config BR2_LINUX_COPY_CONFIGURATION + bool "Copy buildroot configuration to Linux file system" + default y if BR2_TARGET_ATMEL + default n if !BR2_TARGET_ATMEL + help + The configuration files for buildroot, uclibc, busybox and linux + are copied to the "/boot" directory. + +endif + diff --git a/target/linux/Config.in.experimental b/target/linux/Config.in.experimental new file mode 100644 index 000000000..92ffc9e4f --- /dev/null +++ b/target/linux/Config.in.experimental @@ -0,0 +1,346 @@ +if BR2_KERNEL_LINUX_EXPERIMENTAL + +choice + prompt "Linux Kernel Version" + depends on BR2_PACKAGE_LINUX + default BR2_LINUX_2_6_22_1 if !BR2_avr32 + default BR2_LINUX_2_6_22_10 if BR2_avr32 + help + Select the specific Linux version you want to use + +config BR2_LINUX_2_6_SNAP + bool "The latest snapshot for the stable Linux kernel" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.x-git# + +config BR2_LINUX_2_6_MM + bool "With latest -mm patch for the stable Linux kernel" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.x-rc#-mm# + +config BR2_LINUX_2_6_STABLE + bool "The latest stable Linux kernel (2.6.22.1)" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.22.1 + +config BR2_LINUX_2_6_22_10 + bool "Linux 2.6.22.10" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.22.10 + +config BR2_LINUX_2_6_22_1 + bool "Linux 2.6.22.1" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.22.1 + +config BR2_LINUX_2_6_22 + bool "Linux 2.6.22" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.22 + +config BR2_LINUX_2_6_21_6 + bool "Linux 2.6.21.6" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.21.6 + +config BR2_LINUX_2_6_21_1 + bool "Linux 2.6.21.1" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.21.1 + +config BR2_LINUX_2_6_21 + bool "Linux 2.6.21" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.21 + +config BR2_LINUX_2_6_20_4 + bool "Linux 2.6.20.4" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.20.4 + +config BR2_LINUX_2_6_20 + bool "Linux 2.6.20" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.20 + +config BR2_LINUX_2_6_19_2 + bool "Linux 2.6.19.2" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.19.2 + +config BR2_LINUX_2_6_19 + bool "Linux 2.6.19" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.19 + +config BR2_LINUX_2_6_18 + bool "Linux 2.6.18" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.18 + +config BR2_LINUX_2_6_17 + bool "Linux 2.6.17" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.17 + +config BR2_LINUX_2_6_16 + bool "Linux 2.6.16" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.16 + +config BR2_LINUX_2_6_15 + bool "Linux 2.6.15" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.15 + +config BR2_LINUX_2_6_23 + bool "Linux 2.6.23" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.23 + +config BR2_LINUX_CUSTOM + bool "Linux version" + depends BR2_PACKAGE_LINUX + help + Linux + +endchoice + +config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION + string "Linux Tarball version" + depends on BR2_LINUX_CUSTOM + default "linux-2.6.22" + +config BR2_CUSTOM_LINUX26_VERSION + string "Linux Version" + depends on BR2_LINUX_CUSTOM + default "linux-2.6.22-version" + +config BR2_CUSTOM_LINUX26_RC_PATCH + string "RC patch (if needed)" + depends on BR2_LINUX_CUSTOM + default "patch-2.6.22-rc6-mm1.bz2" + +menu "Patches" + depends on BR2_PACKAGE_LINUX + +config BR2_LINUX_BSP_PATCH + string "Additional patch to apply (supply full path)" + default "" + +endmenu + +config BR2_DOWNLOAD_LINUX26_VERSION + string #"Selected Tarball:" + default "2.6.15" if BR2_LINUX_2_6_15 + default "2.6.16" if BR2_LINUX_2_6_16 + default "2.6.17" if BR2_LINUX_2_6_17 + default "2.6.18" if BR2_LINUX_2_6_18 + default "2.6.19" if BR2_LINUX_2_6_19 + default "2.6.19.2" if BR2_LINUX_2_6_19_2 + default "2.6.20" if BR2_LINUX_2_6_20 + default "2.6.20.4" if BR2_LINUX_2_6_20_4 + default "2.6.21" if BR2_LINUX_2_6_21 + default "2.6.21.1" if BR2_LINUX_2_6_21_1 + default "2.6.21.6" if BR2_LINUX_2_6_21_6 + default "2.6.22" if BR2_LINUX_2_6_22 + default "2.6.22.1" if BR2_LINUX_2_6_22_1 + default "2.6.22.10" if BR2_LINUX_2_6_22_10 + default "2.6.22" if BR2_LINUX_2_6_23_RC1 + default "2.6.22" if BR2_LINUX_2_6_SNAP + default "2.6.22" if BR2_LINUX_2_6_MM + default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX_CUSTOM + +config BR2_LINUX26_VERSION + string #"Selected Version:" + default "2.6.15" if BR2_LINUX_2_6_15 + default "2.6.16" if BR2_LINUX_2_6_16 + default "2.6.17" if BR2_LINUX_2_6_17 + default "2.6.18" if BR2_LINUX_2_6_18 + default "2.6.19" if BR2_LINUX_2_6_19 + default "2.6.19.2" if BR2_LINUX_2_6_19_2 + default "2.6.20" if BR2_LINUX_2_6_20 + default "2.6.20.4" if BR2_LINUX_2_6_20_4 + default "2.6.21" if BR2_LINUX_2_6_21 + default "2.6.21.1" if BR2_LINUX_2_6_21_1 + default "2.6.21.6" if BR2_LINUX_2_6_21_6 + default "2.6.22" if BR2_LINUX_2_6_22 + default "2.6.22.1" if BR2_LINUX_2_6_22_1 + default "2.6.22.10" if BR2_LINUX_2_6_22_10 + default "2.6.22" if BR2_LINUX_2_6_23_RC1 + default "2.6.22" if BR2_LINUX_2_6_SNAP + default "2.6.22" if BR2_LINUX_2_6_MM + default $(BR2_CUSTOM_LINUX26_VERSION) if BR2_LINUX_CUSTOM + +config BR2_LINUX26_RC_PATCH + string #"Selected Patch:" + default "" if BR2_LINUX_2_6_15 + default "" if BR2_LINUX_2_6_16 + default "" if BR2_LINUX_2_6_17 + default "" if BR2_LINUX_2_6_18 + default "" if BR2_LINUX_2_6_19 + default "" if BR2_LINUX_2_6_19_2 + default "" if BR2_LINUX_2_6_20 + default "" if BR2_LINUX_2_6_20_4 + default "" if BR2_LINUX_2_6_21 + default "" if BR2_LINUX_2_6_21_1 + default "" if BR2_LINUX_2_6_21_6 + default "" if BR2_LINUX_2_6_22 + default "" if BR2_LINUX_2_6_22_1 + default "" if BR2_LINUX_2_6_22_10 + default "patch-2.6.23-rc1.bz2" if BR2_LINUX_2_6_23_RC1 + default $(BR2_CUSTOM_LINUX26_RC_PATCH) if BR2_LINUX_CUSTOM + +choice + prompt "Linux Kernel Configuration" + depends on BR2_PACKAGE_LINUX + default BR2_PACKAGE_LINUX_USE_KCONFIG + help + Select the way to configure the Linux + +config BR2_PACKAGE_LINUX_USE_KCONFIG + bool ".config file" + depends on BR2_PACKAGE_LINUX + help + kernel's .config to use to build a kernel for the target. + + If the above setting is empty, you can change the default + board-imposed value by passing LINUX26_KCONFIG= to + make. + +config BR2_LINUX26_DEFCONFIG + bool "Run make _defconfig " + depends BR2_PACKAGE_LINUX + help + Configure Linux by make _defconfig + +config BR2_LINUX_CUSTOMIZE + bool "Run make ARCH=$(ARCH) xconfig before build" + depends BR2_PACKAGE_LINUX + help + Configure Linux by make xconfig +endchoice + +config BR2_PACKAGE_LINUX_KCONFIG + string ".config file" + depends on BR2_PACKAGE_LINUX_USE_KCONFIG + default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config" + help + kernel's .config to use to build a kernel for the target. + + If the above setting is empty, you can change the default + board-imposed value by passing LINUX26_KCONFIG= to + make. + +choice + prompt "kernel binary format" + depends on BR2_PACKAGE_LINUX + default BR2_LINUX_BIN_UIMAGE + help + Select the specific Linux binary type you want to use + +config BR2_LINUX_BIN_BZIMAGE + bool "bzImage" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.19.2 + +config BR2_LINUX_BIN_UIMAGE + bool "uImage" + depends BR2_PACKAGE_LINUX + help + Build uImage binary + +config BR2_LINUX_BIN_VMLINUX + bool "vmlinux" + depends BR2_PACKAGE_LINUX + help + Build vmlinux binary + +config BR2_LINUX_BIN_ZIMAGE + bool "zImage" + depends BR2_PACKAGE_LINUX + help + Linux 2.6.19.2 + +config BR2_LINUX_BIN_CUSTOM + bool " Linux binary" + depends BR2_PACKAGE_LINUX + help + Build custom Linux binary format +endchoice + +config BR2_LINUX_BIN_CUSTOM_BIN + string "custom kernel binary format" + depends on BR2_LINUX_BIN_CUSTOM + default "" + help + Which Linux binary format? + +config BR2_PACKAGE_LINUX_FORMAT + string #"kernel binary format" + depends on BR2_PACKAGE_LINUX + default "bzImage" if BR2_LINUX_BIN_BZIMAGE + default "uImage" if BR2_LINUX_BIN_UIMAGE + default "vmlinux" if BR2_LINUX_BIN_VMLINUX + default "zImage" if BR2_LINUX_BIN_ZIMAGE + default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM + help + kernel binary format. + Popular values include: + - bzImage + - zImage + - vmlinux + - zImage + - xipImage + and other, architecture dependant formats. + + Note that the default format is supposed to be set by your + board-description, if any. + i386 and compatible default to bzImage if nothing was given + above. + If the above setting is empty, you can change the default + board-imposed value by passing LINUX26_FORMAT= to + make. + +comment "Destinations for linux kernel binaries" + depends on BR2_PACKAGE_LINUX + +config BR2_LINUX_IN_ROOTFS + bool "Copy kernel to root file system" + depends BR2_PACKAGE_LINUX + default n + help + Copy kernel to /boot directory + +menuconfig BR2_LINUX_COPY + bool "Secondary Copy" + depends on BR2_PACKAGE_LINUX + default y + +config BR2_LINUX_COPYTO + string "also copy the image to..." + depends BR2_LINUX_COPY + default "/tftpboot" + help + Copy kernel to secondary location + +endif diff --git a/target/linux/Makefile.in.advanced b/target/linux/Makefile.in.advanced new file mode 100644 index 000000000..29eace144 --- /dev/null +++ b/target/linux/Makefile.in.advanced @@ -0,0 +1,438 @@ +############################################################################### +# +# Linux kernel 2.6 target (Advanced configuration) +# +############################################################################### +ifneq ($(filter $(TARGETS),linux26),) + +# ----------------------------------------------------------------------------- +# Make sure LINUX_HEADERS_VERSION is defined +ifeq ($(LINUX_HEADERS_VERSION),) +# We did not have headers (this is for real???) +LINUX_HEADERS_VERSION:=2.6.22.1 +endif + +# ----------------------------------------------------------------------------- +# STRATEGY FOR DOWNLOAD_LINUX26_VERSION +# 1. Use definition from user Makefile +# 2. Use definition from Kconfig +# 3. Use Linux Headers version +# 4. Use default (2.6.22.1) +ifeq ($(DOWNLOAD_LINUX26_VERSION),) +ifneq ($(BR2_DOWNLOAD_LINUX26_VERSION),) +DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",,$(BR2_DOWNLOAD_LINUX26_VERSION))) +#")) +else +DOWNLOAD_LINUX26_VERSION:=$(LINUX_HEADERS_VERSION) +endif +endif + +# ----------------------------------------------------------------------------- +# STRATEGY FOR LINUX26_VERSION +# 1. Use definition from user Makefile +# 2. Use definition from Kconfig +# 3. Use Linux Headers version +# 4. Use default (2.6.22.1) +ifeq ($(LINUX26_VERSION),) +ifneq ($(BR2_LINUX26_VERSION),) +LINUX26_VERSION:=$(strip $(subst ",,$(BR2_LINUX26_VERSION))) +#")) +else +LINUX26_VERSION:=$(LINUX_HEADERS_VERSION) +endif +endif + +ifeq ($(BOARD_PATH),) +BOARD_PATH:=$(strip $(subst ",,$(BR2_BOARD_PATH))) +#")) +endif + +# Version of Linux AFTER patches +LINUX26_DIR:=$(PROJECT_BUILD_DIR)/linux-$(LINUX26_VERSION) + +# for packages that need it +LINUX_VERSION:=$(LINUX26_VERSION) +LINUX_DIR:=$(LINUX26_DIR) + +# ----------------------------------------------------------------------------- +# Define source name and sites +LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2 +LINUX26_SITE:=$(strip $(subst ",,$(BR2_KERNEL_SITE))) +#")) + +LINUX26_PATCH_SOURCE:=$(strip $(subst ",,$(BR2_KERNEL_PATCH))) +#")) +LINUX26_PATCH_SITE:=$(strip $(subst ",,$(BR2_KERNEL_PATCH_SITE))) +#")) + +LINUX26_BSP_PATCH:=$(strip $(subst ",,$(BR2_LINUX_BSP_PATCH))) +#")) + +LINUX26_PATCH_SITE:=$(strip $(subst ",,$(BR2_KERNEL_SITE))) +#")) + +# ------------------------------------ +# kernel patches provided by buildroot +ifeq ($(strip $(LINUX26_PATCH_DIR)),) +LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches-$(LINUX26_VERSION)/ +endif + +# ----------------------------------------------------------------------------- +# Linux kernel configuration file +# This is used if BR2_PACKAGE_LINUX_USE_KCONFIG is set +# Has to be set by the target/device +# If it is not set by the target/device, then pick the one from .config +ifndef LINUX26_KCONFIG +ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG))),) +LINUX26_KCONFIG:=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG))) +#")) +#")) +else +ifeq ($(BR2_i386),y) +LINUX26_KCONFIG:=$(BOARD_PATH)/linux26.config +else +LINUX26_KCONFIG:=$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config +endif +endif +endif + +# ----------------------------------------------------------------------------- +ifndef LINUX26_FORMAT +ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT))),) +#")) +LINUX26_FORMAT:=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT))) +#")) +else +LINUX26_FORMAT:=zImage +endif +endif + +# ----------------------------------------------------------------------------- +# Has to be set by the target/device +ifeq ($(LINUX26_BINLOC),) + +# -------------- +# VMLINUX +ifeq ($(LINUX26_FORMAT),vmlinux) +LINUX26_BINLOC:=$(LINUX26_FORMAT) +KERNEL_EXT:= +endif + +# -------------- +# UIMAGE +ifeq ($(LINUX26_FORMAT),uImage) +ifeq ($(BR2_avr32),y) +LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/images/$(LINUX26_FORMAT) +else +LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT) +endif +KERNEL_EXT:=.gz +endif + +# -------------- +# ZIMAGE +ifeq ($(LINUX26_FORMAT),zImage) +LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT) +KERNEL_EXT:=.z +endif + +# -------------- +# BZIMAGE +ifeq ($(LINUX26_FORMAT),bzImage) +LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT) +KERNEL_EXT:=.bz +endif + +endif + +# ----------------------------------------------------------------------------- +# File name for the Linux kernel binary +LINUX_KERNEL_NAME:=$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE)$(KERNEL_EXT) + +ifndef LINUX26_KERNEL +LINUX26_KERNEL:=$(BINARIES_DIR)/$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE)$(KERNEL_EXT) +endif + +# for packages that need it +LINUX_KERNEL:=$(LINUX26_KERNEL) + + +# ----------------------------------------------------------------------------- +LINUX26_BZCAT:=$(BZCAT) + +__LINUX26_NO_PIC=-fPIC -fpic -DPIC -fwrapv -ftrapv +LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \ + ARCH=$(KERNEL_ARCH) \ + CFLAGS_KERNEL="$(filter-out $(__LINUX26_NO_PIC),$(TARGET_CFLAGS))" \ + INSTALL_MOD_PATH=$(TARGET_DIR) \ + CROSS_COMPILE=$(KERNEL_CROSS) \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + LZMA="$(LZMA)" + +# ============================================================================= + +$(LINUX26_KCONFIG): + @if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \ + echo ""; \ + echo "You should create a .config for your kernel"; \ + echo "and install it as $(LINUX26_KCONFIG)"; \ + echo ""; \ + sleep 5; \ + fi +# ============================================================================= +ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION))) +$(DL_DIR)/$(LINUX26_SOURCE): + $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE) +endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION)) + +ifneq ($(strip $(LINUX26_PATCH_SOURCE)),) +$(DL_DIR)/$(LINUX26_PATCH_SOURCE): + $(WGET) -P $(DL_DIR) $(LINUX26_PATCH_SITE)/$(LINUX26_PATCH_SOURCE) +endif + +$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE) + rm -rf $(LINUX26_DIR) + @echo "*** Unpacking kernel source" + $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) - +ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION)) + # Rename the dir from the downloaded version to the AFTER patch version + mv -f $(PROJECT_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR) +endif + touch $@ + + +# ----------------------------------------------------------------------------- +LINUX26_TARGETS+=$(LINUX26_KERNEL) + +ifeq ($(BR2_LINUX_COPYTO_ROOTFS),y) +LINUX26_TARGETS+=$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME) +endif + +ifeq ($(BR2_LINUX_COPYTO_TFTPBOOT),y) +LINUX26_TARGETS+=/tftpboot/$(LINUX26_KERNEL_NAME) +endif + +ifneq ($(BR2_LINUX_COPYTO),) +LINUX_COPYTO:=$(strip $(subst ",,$(BR2_LINUX_COPYTO))) +#")) +LINUX26_TARGETS+=$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME) +endif + +ifneq ($(BR2_LINUX_COPY_CONFIGURATION),) +LINUX26_TARGETS+=$(TARGET_DIR)/boot/buildroot.config +LINUX26_TARGETS+=$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config +LINUX26_TARGETS+=$(TARGET_DIR)/boot/uclibc.config +ifeq ($(BR2_PACKAGE_BUSYBOX),y) +LINUX26_TARGETS+=$(TARGET_DIR)/boot/busybox.config +endif +endif +# ----------------------------------------------------------------------------- + +$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS) +ifneq ($(LINUX26_PATCH_SOURCE),) + toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_PATCH_SOURCE) +endif +ifneq ($(LINUX26_BSP_PATCH),) + toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_BSP_PATCH) +endif + toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \ + linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2} +ifeq ($(BR2_KERNEL_HEADERS_IPMI),y) + toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers/ipmi \ + linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2} +endif +ifeq ($(BR2_KERNEL_HEADERS_LZMA),y) + toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers/lzma \ + linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2} +endif +ifeq ($(BR2_KERNEL_HEADERS_RT),y) + toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE) +endif +ifeq ($(BR2_KERNEL_HEADERS_PATCH_DIR),y) + if [ -d $(KERNEL_HEADERS_PATCH_DIR) ] ; then \ + toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \ + linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2} \ + fi +endif +ifeq ($(BR2_PACKAGE_OPENSWAN),y) + toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \ + linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2} +endif +ifneq ($(LINUX26_PATCH_DIR),) + if [ -d $(LINUX26_PATCH_DIR) ] ; then \ + toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) linux-$(LINUX26_VERSION)-\*.patch ; \ + fi +endif + touch $@ + +# ----------------------------------------------------------------------------- +$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG) +ifeq ($(BR2_PACKAGE_LINUX_USE_DEFCONFIG),y) + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig +endif +ifeq ($(BR2_PACKAGE_LINUX_USE_XCONFIG),y) + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig +endif +ifeq ($(BR2_PACKAGE_LINUX_USE_KCONFIG),y) + cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config +endif + $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config +ifeq ($(BR2_ARM_EABI),y) + echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config + $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config + echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config +else + echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config +endif + $(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config +ifeq ($(BR2_INET_IPV6),y) + echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config +else + echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config +endif + $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config + $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config +ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y) + echo "CONFIG_INITRAMFS_SOURCE=\"$(INITRAMFS_TARGET)\"" >> \ + $(LINUX26_DIR)/.config + echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config + echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config +else + echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config +endif +ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y) + # precedence for a small initramfs + $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config + $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config + echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \ + $(LINUX26_DIR)/.config + echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config + echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config +endif + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig + touch $@ + +# ----------------------------------------------------------------------------- +$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare + touch $@ + +$(LINUX26_KERNEL): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \ + $(LINUX26_DIR)/.depend_done + $(MAKE) $(LINUX26_MAKE_FLAGS) \ + -C $(LINUX26_DIR) $(LINUX26_FORMAT) + cp -dpf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL) + touch -c $@ + +# ----------------------------------------------------------------------------- +$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_DIR)/.configured + rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION) + rm -f $(TARGET_DIR)/sbin/cardmgr + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \ + DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \ + INSTALL_MOD_PATH=$(TARGET_DIR) modules_install + rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build + rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/source + $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX_HEADERS_VERSION) + touch -c $@ + +linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed + [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig + -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured + +linux26-xconfig: $(LINUX26_DIR)/.patched host-sed + [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config + $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig + -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured + +$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL) + mkdir -p $(TARGET_DIR)/boot + cp -dpf $(LINUX26_KERNEL) $(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME) + +$(TARGET_DIR)/boot/buildroot.config: .config + mkdir -p $(TARGET_DIR)/boot + cp -dpf .config $(TARGET_DIR)/boot/buildroot.config + +$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config: $(LINUX26_DIR)/.config + mkdir -p $(TARGET_DIR)/boot + cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config + +$(TARGET_DIR)/boot/uclibc.config: .$(UCLIBC_DIR)/.config + mkdir -p $(TARGET_DIR)/boot + cp -dpf $(UCLIBC_DIR)/.config $(TARGET_DIR)/boot/uclibc.config + +$(TARGET_DIR)/boot/busybox.config: $(BUSYBOX_DIR)/.config + mkdir -p $(TARGET_DIR)/boot + cp -dpf .config $(TARGET_DIR)/boot/busybox.config + +/tftpboot/$(LINUX_KERNEL_NAME): $(LINUX26_KERNEL) + mkdir -p /tftpboot + cp -dpf $(LINUX26_KERNEL) /tftpboot/$(LINUX_KERNEL_NAME) + +$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL) + mkdir -p $(LINUX_COPYTO) + cp -dpf $(LINUX26_KERNEL) $(LINUX_COPYTO)/$(LINUX_KERNEL_NAME) + +linux26: $(LINUX26_TARGETS) + +$(LINUX26_DIR)/.modules_installed: $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep + touch $@ + +linux26-modules: cross-depmod26 $(LINUX26_DIR)/.modules_installed + +linux26-source: $(DL_DIR)/$(LINUX26_SOURCE) + +linux26-unpacked: $(LINUX26_DIR)/.patched + +linux26-config: host-sed $(LINUX26_DIR)/.configured + +linux26-update: + cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG) + +# This has been renamed so we do _NOT_ by default run this on 'make clean' +linux26clean: + rm -f $(LINUX26_KERNEL) $(LINUX26_DIR)/.configured + -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean + +linux26-dirclean: + rm -rf $(LINUX26_DIR) + +linux-status: + @echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR) + @echo BOARD_NAME=$(BOARD_NAME) + @echo BR2_BOARD_PATH=$(BR2_BOARD_PATH) + @echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION) + @echo LINUX26_VERSION=$(LINUX26_VERSION) + @echo LINUX26_SOURCE=$(LINUX26_SOURCE) + @echo LINUX26_DIR=$(LINUX26_DIR) + @echo TARGETS=$(TARGETS) + @echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR) + @echo LINUX26_BINLOC=$(LINUX26_BINLOC) + @echo LINUX26_FORMAT=$(LINUX26_FORMAT) + @echo LINUX26_KERNEL=$(LINUX26_KERNEL) + @echo BR2_KERNEL_SITE=$(BR2_KERNEL_SITE) + @echo BR2_KERNEL_PATCH_SITE=$(BR2_KERNEL_PATCH_SITE) + @echo BR2_KERNEL_PATCH=$(BR2_KERNEL_PATCH) + @echo BR2_LINUX26_CUSTOM=$(BR2_LINUX26_CUSTOM) + @echo BR2_CUSTOM_LINUX26_PATCH_SITE=$(BR2_CUSTOM_LINUX26_PATCH_SITE) + @echo BR2_CUSTOM_LINUX26_PATCH=$(BR2_CUSTOM_LINUX26_PATCH) + @echo BR2_LINUX_BSP_PATCH=$(BR2_LINUX_BSP_PATCH) + @echo BR2_PACKAGE_LINUX_USE_KCONFIG=$(BR2_PACKAGE_LINUX_USE_KCONFIG) + @echo BR2_PACKAGE_LINUX_USE_DEFCONFIG=$(BR2_PACKAGE_LINUX_USE_DEFCONFIG) + @echo BR2_PACKAGE_LINUX_USE_XCONFIG=$(BR2_PACKAGE_LINUX_USE_XCONFIG) + @echo BR2_PACKAGE_LINUX_KCONFIG=$(BR2_PACKAGE_LINUX_KCONFIG) + @echo BR2_LINUX_COPYTO_ROOTFS=$(BR2_LINUX_COPYTO_ROOTFS) + @echo BR2_LINUX_COPYTO_TFTPBOOT=$(BR2_LINUX_COPYTO_TFTPBOOT=) + @echo BR2_LINUX_COPYTO=$(BR2_LINUX_COPYTO) + @echo BR2_KERNEL_MINORLEVEL=$(BR2_KERNEL_MINORLEVEL) + @echo LINUX26_LATEST_RC_PATCH=$(LINUX26_LATEST_RC_PATCH) + @echo BR2_KERNEL_RC_LEVEL=$(BR2_KERNEL_RC_LEVEL) + @echo LINUX26_LATEST_MM_PATCH=$(LINUX26_LATEST_MM_PATCH) + @echo BR2_KERNEL_MM_LEVEL=$(BR2_KERNEL_MM_LEVEL) + @echo LINUX26_LATEST_GIT_PATCH=$(LINUX26_LATEST_GIT_PATCH) + @echo BR2_KERNEL_GIT_LEVEL=$(BR2_KERNEL_GIT_LEVEL) + + +endif -- cgit v1.2.3