summaryrefslogtreecommitdiffstats
path: root/toolchain
diff options
context:
space:
mode:
Diffstat (limited to 'toolchain')
-rw-r--r--toolchain/kernel-headers/linux-2.6.20.3-ipmisensors-20070314-1214.patch6103
1 files changed, 6103 insertions, 0 deletions
diff --git a/toolchain/kernel-headers/linux-2.6.20.3-ipmisensors-20070314-1214.patch b/toolchain/kernel-headers/linux-2.6.20.3-ipmisensors-20070314-1214.patch
new file mode 100644
index 000000000..506fcb4c7
--- /dev/null
+++ b/toolchain/kernel-headers/linux-2.6.20.3-ipmisensors-20070314-1214.patch
@@ -0,0 +1,6103 @@
+diff -rduNp linux-2.6.20.3.orig/drivers/char/ipmi/ipmi_msghandler.c linux-2.6.20.3/drivers/char/ipmi/ipmi_msghandler.c
+--- linux-2.6.20.3.orig/drivers/char/ipmi/ipmi_msghandler.c 2007-03-13 19:27:08.000000000 +0100
++++ linux-2.6.20.3/drivers/char/ipmi/ipmi_msghandler.c 2007-03-14 14:23:02.000000000 +0100
+@@ -1954,6 +1954,24 @@ static void remove_proc_entries(ipmi_smi
+ #endif /* CONFIG_PROC_FS */
+ }
+
++/*
++ * Retrieves the bmc_device struct for a given ipmi interface number (or NULL if none).
++ */
++struct device *ipmi_get_bmcdevice(int if_num)
++{
++ ipmi_smi_t intf;
++ mutex_lock(&ipmi_interfaces_mutex);
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ if (intf->intf_num == if_num){
++ mutex_unlock(&ipmi_interfaces_mutex);
++ return &intf->bmc->dev->dev;
++ }
++ }
++ mutex_unlock(&ipmi_interfaces_mutex);
++
++ return NULL;
++}
++
+ static int __find_bmc_guid(struct device *dev, void *data)
+ {
+ unsigned char *id = data;
+@@ -4183,3 +4201,4 @@ EXPORT_SYMBOL(ipmi_get_my_LUN);
+ EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
+ EXPORT_SYMBOL(ipmi_user_set_run_to_completion);
+ EXPORT_SYMBOL(ipmi_free_recv_msg);
++EXPORT_SYMBOL(ipmi_get_bmcdevice);
+diff -rduNp linux-2.6.20.3.orig/drivers/char/ipmi/ipmi_msghandler.c.orig linux-2.6.20.3/drivers/char/ipmi/ipmi_msghandler.c.orig
+--- linux-2.6.20.3.orig/drivers/char/ipmi/ipmi_msghandler.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.3/drivers/char/ipmi/ipmi_msghandler.c.orig 2007-03-14 14:22:33.000000000 +0100
+@@ -0,0 +1,4185 @@
++/*
++ * ipmi_msghandler.c
++ *
++ * Incoming and outgoing message routing for an IPMI interface.
++ *
++ * Author: MontaVista Software, Inc.
++ * Corey Minyard <minyard@mvista.com>
++ * source@mvista.com
++ *
++ * Copyright 2002 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
++ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
++ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
++ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <asm/system.h>
++#include <linux/sched.h>
++#include <linux/poll.h>
++#include <linux/spinlock.h>
++#include <linux/mutex.h>
++#include <linux/slab.h>
++#include <linux/ipmi.h>
++#include <linux/ipmi_smi.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <linux/proc_fs.h>
++#include <linux/rcupdate.h>
++
++#define PFX "IPMI message handler: "
++
++#define IPMI_DRIVER_VERSION "39.1"
++
++static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
++static int ipmi_init_msghandler(void);
++
++static int initialized;
++
++#ifdef CONFIG_PROC_FS
++static struct proc_dir_entry *proc_ipmi_root;
++#endif /* CONFIG_PROC_FS */
++
++/* Remain in auto-maintenance mode for this amount of time (in ms). */
++#define IPMI_MAINTENANCE_MODE_TIMEOUT 30000
++
++#define MAX_EVENTS_IN_QUEUE 25
++
++/* Don't let a message sit in a queue forever, always time it with at lest
++ the max message timer. This is in milliseconds. */
++#define MAX_MSG_TIMEOUT 60000
++
++
++/*
++ * The main "user" data structure.
++ */
++struct ipmi_user
++{
++ struct list_head link;
++
++ /* Set to "0" when the user is destroyed. */
++ int valid;
++
++ struct kref refcount;
++
++ /* The upper layer that handles receive messages. */
++ struct ipmi_user_hndl *handler;
++ void *handler_data;
++
++ /* The interface this user is bound to. */
++ ipmi_smi_t intf;
++
++ /* Does this interface receive IPMI events? */
++ int gets_events;
++};
++
++struct cmd_rcvr
++{
++ struct list_head link;
++
++ ipmi_user_t user;
++ unsigned char netfn;
++ unsigned char cmd;
++ unsigned int chans;
++
++ /*
++ * This is used to form a linked lised during mass deletion.
++ * Since this is in an RCU list, we cannot use the link above
++ * or change any data until the RCU period completes. So we
++ * use this next variable during mass deletion so we can have
++ * a list and don't have to wait and restart the search on
++ * every individual deletion of a command. */
++ struct cmd_rcvr *next;
++};
++
++struct seq_table
++{
++ unsigned int inuse : 1;
++ unsigned int broadcast : 1;
++
++ unsigned long timeout;
++ unsigned long orig_timeout;
++ unsigned int retries_left;
++
++ /* To verify on an incoming send message response that this is
++ the message that the response is for, we keep a sequence id
++ and increment it every time we send a message. */
++ long seqid;
++
++ /* This is held so we can properly respond to the message on a
++ timeout, and it is used to hold the temporary data for
++ retransmission, too. */
++ struct ipmi_recv_msg *recv_msg;
++};
++
++/* Store the information in a msgid (long) to allow us to find a
++ sequence table entry from the msgid. */
++#define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff))
++
++#define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \
++ do { \
++ seq = ((msgid >> 26) & 0x3f); \
++ seqid = (msgid & 0x3fffff); \
++ } while (0)
++
++#define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff)
++
++struct ipmi_channel
++{
++ unsigned char medium;
++ unsigned char protocol;
++
++ /* My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR,
++ but may be changed by the user. */
++ unsigned char address;
++
++ /* My LUN. This should generally stay the SMS LUN, but just in
++ case... */
++ unsigned char lun;
++};
++
++#ifdef CONFIG_PROC_FS
++struct ipmi_proc_entry
++{
++ char *name;
++ struct ipmi_proc_entry *next;
++};
++#endif
++
++struct bmc_device
++{
++ struct platform_device *dev;
++ struct ipmi_device_id id;
++ unsigned char guid[16];
++ int guid_set;
++
++ struct kref refcount;
++
++ /* bmc device attributes */
++ struct device_attribute device_id_attr;
++ struct device_attribute provides_dev_sdrs_attr;
++ struct device_attribute revision_attr;
++ struct device_attribute firmware_rev_attr;
++ struct device_attribute version_attr;
++ struct device_attribute add_dev_support_attr;
++ struct device_attribute manufacturer_id_attr;
++ struct device_attribute product_id_attr;
++ struct device_attribute guid_attr;
++ struct device_attribute aux_firmware_rev_attr;
++};
++
++#define IPMI_IPMB_NUM_SEQ 64
++#define IPMI_MAX_CHANNELS 16
++struct ipmi_smi
++{
++ /* What interface number are we? */
++ int intf_num;
++
++ struct kref refcount;
++
++ /* Used for a list of interfaces. */
++ struct list_head link;
++
++ /* The list of upper layers that are using me. seq_lock
++ * protects this. */
++ struct list_head users;
++
++ /* Information to supply to users. */
++ unsigned char ipmi_version_major;
++ unsigned char ipmi_version_minor;
++
++ /* Used for wake ups at startup. */
++ wait_queue_head_t waitq;
++
++ struct bmc_device *bmc;
++ char *my_dev_name;
++ char *sysfs_name;
++
++ /* This is the lower-layer's sender routine. Note that you
++ * must either be holding the ipmi_interfaces_mutex or be in
++ * an umpreemptible region to use this. You must fetch the
++ * value into a local variable and make sure it is not NULL. */
++ struct ipmi_smi_handlers *handlers;
++ void *send_info;
++
++#ifdef CONFIG_PROC_FS
++ /* A list of proc entries for this interface. This does not
++ need a lock, only one thread creates it and only one thread
++ destroys it. */
++ spinlock_t proc_entry_lock;
++ struct ipmi_proc_entry *proc_entries;
++#endif
++
++ /* Driver-model device for the system interface. */
++ struct device *si_dev;
++
++ /* A table of sequence numbers for this interface. We use the
++ sequence numbers for IPMB messages that go out of the
++ interface to match them up with their responses. A routine
++ is called periodically to time the items in this list. */
++ spinlock_t seq_lock;
++ struct seq_table seq_table[IPMI_IPMB_NUM_SEQ];
++ int curr_seq;
++
++ /* Messages that were delayed for some reason (out of memory,
++ for instance), will go in here to be processed later in a
++ periodic timer interrupt. */
++ spinlock_t waiting_msgs_lock;
++ struct list_head waiting_msgs;
++
++ /* The list of command receivers that are registered for commands
++ on this interface. */
++ struct mutex cmd_rcvrs_mutex;
++ struct list_head cmd_rcvrs;
++
++ /* Events that were queues because no one was there to receive
++ them. */
++ spinlock_t events_lock; /* For dealing with event stuff. */
++ struct list_head waiting_events;
++ unsigned int waiting_events_count; /* How many events in queue? */
++ int delivering_events;
++
++ /* The event receiver for my BMC, only really used at panic
++ shutdown as a place to store this. */
++ unsigned char event_receiver;
++ unsigned char event_receiver_lun;
++ unsigned char local_sel_device;
++ unsigned char local_event_generator;
++
++ /* For handling of maintenance mode. */
++ int maintenance_mode;
++ int maintenance_mode_enable;
++ int auto_maintenance_timeout;
++ spinlock_t maintenance_mode_lock; /* Used in a timer... */
++
++ /* A cheap hack, if this is non-null and a message to an
++ interface comes in with a NULL user, call this routine with
++ it. Note that the message will still be freed by the
++ caller. This only works on the system interface. */
++ void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg);
++
++ /* When we are scanning the channels for an SMI, this will
++ tell which channel we are scanning. */
++ int curr_channel;
++
++ /* Channel information */
++ struct ipmi_channel channels[IPMI_MAX_CHANNELS];
++
++ /* Proc FS stuff. */
++ struct proc_dir_entry *proc_dir;
++ char proc_dir_name[10];
++
++ spinlock_t counter_lock; /* For making counters atomic. */
++
++ /* Commands we got that were invalid. */
++ unsigned int sent_invalid_commands;
++
++ /* Commands we sent to the MC. */
++ unsigned int sent_local_commands;
++ /* Responses from the MC that were delivered to a user. */
++ unsigned int handled_local_responses;
++ /* Responses from the MC that were not delivered to a user. */
++ unsigned int unhandled_local_responses;
++
++ /* Commands we sent out to the IPMB bus. */
++ unsigned int sent_ipmb_commands;
++ /* Commands sent on the IPMB that had errors on the SEND CMD */
++ unsigned int sent_ipmb_command_errs;
++ /* Each retransmit increments this count. */
++ unsigned int retransmitted_ipmb_commands;
++ /* When a message times out (runs out of retransmits) this is
++ incremented. */
++ unsigned int timed_out_ipmb_commands;
++
++ /* This is like above, but for broadcasts. Broadcasts are
++ *not* included in the above count (they are expected to
++ time out). */
++ unsigned int timed_out_ipmb_broadcasts;
++
++ /* Responses I have sent to the IPMB bus. */
++ unsigned int sent_ipmb_responses;
++
++ /* The response was delivered to the user. */
++ unsigned int handled_ipmb_responses;
++ /* The response had invalid data in it. */
++ unsigned int invalid_ipmb_responses;
++ /* The response didn't have anyone waiting for it. */
++ unsigned int unhandled_ipmb_responses;
++
++ /* Commands we sent out to the IPMB bus. */
++ unsigned int sent_lan_commands;
++ /* Commands sent on the IPMB that had errors on the SEND CMD */
++ unsigned int sent_lan_command_errs;
++ /* Each retransmit increments this count. */
++ unsigned int retransmitted_lan_commands;
++ /* When a message times out (runs out of retransmits) this is
++ incremented. */
++ unsigned int timed_out_lan_commands;
++
++ /* Responses I have sent to the IPMB bus. */
++ unsigned int sent_lan_responses;
++
++ /* The response was delivered to the user. */
++ unsigned int handled_lan_responses;
++ /* The response had invalid data in it. */
++ unsigned int invalid_lan_responses;
++ /* The response didn't have anyone waiting for it. */
++ unsigned int unhandled_lan_responses;
++
++ /* The command was delivered to the user. */
++ unsigned int handled_commands;
++ /* The command had invalid data in it. */
++ unsigned int invalid_commands;
++ /* The command didn't have anyone waiting for it. */
++ unsigned int unhandled_commands;
++
++ /* Invalid data in an event. */
++ unsigned int invalid_events;
++ /* Events that were received with the proper format. */
++ unsigned int events;
++};
++#define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev)
++
++/**
++ * The driver model view of the IPMI messaging driver.
++ */
++static struct device_driver ipmidriver = {
++ .name = "ipmi",
++ .bus = &platform_bus_type
++};
++static DEFINE_MUTEX(ipmidriver_mutex);
++
++static struct list_head ipmi_interfaces = LIST_HEAD_INIT(ipmi_interfaces);
++static DEFINE_MUTEX(ipmi_interfaces_mutex);
++
++/* List of watchers that want to know when smi's are added and
++ deleted. */
++static struct list_head smi_watchers = LIST_HEAD_INIT(smi_watchers);
++static DEFINE_MUTEX(smi_watchers_mutex);
++
++
++static void free_recv_msg_list(struct list_head *q)
++{
++ struct ipmi_recv_msg *msg, *msg2;
++
++ list_for_each_entry_safe(msg, msg2, q, link) {
++ list_del(&msg->link);
++ ipmi_free_recv_msg(msg);
++ }
++}
++
++static void free_smi_msg_list(struct list_head *q)
++{
++ struct ipmi_smi_msg *msg, *msg2;
++
++ list_for_each_entry_safe(msg, msg2, q, link) {
++ list_del(&msg->link);
++ ipmi_free_smi_msg(msg);
++ }
++}
++
++static void clean_up_interface_data(ipmi_smi_t intf)
++{
++ int i;
++ struct cmd_rcvr *rcvr, *rcvr2;
++ struct list_head list;
++
++ free_smi_msg_list(&intf->waiting_msgs);
++ free_recv_msg_list(&intf->waiting_events);
++
++ /* Wholesale remove all the entries from the list in the
++ * interface and wait for RCU to know that none are in use. */
++ mutex_lock(&intf->cmd_rcvrs_mutex);
++ list_add_rcu(&list, &intf->cmd_rcvrs);
++ list_del_rcu(&intf->cmd_rcvrs);
++ mutex_unlock(&intf->cmd_rcvrs_mutex);
++ synchronize_rcu();
++
++ list_for_each_entry_safe(rcvr, rcvr2, &list, link)
++ kfree(rcvr);
++
++ for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) {
++ if ((intf->seq_table[i].inuse)
++ && (intf->seq_table[i].recv_msg))
++ {
++ ipmi_free_recv_msg(intf->seq_table[i].recv_msg);
++ }
++ }
++}
++
++static void intf_free(struct kref *ref)
++{
++ ipmi_smi_t intf = container_of(ref, struct ipmi_smi, refcount);
++
++ clean_up_interface_data(intf);
++ kfree(intf);
++}
++
++struct watcher_entry {
++ int intf_num;
++ ipmi_smi_t intf;
++ struct list_head link;
++};
++
++int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher)
++{
++ ipmi_smi_t intf;
++ struct list_head to_deliver = LIST_HEAD_INIT(to_deliver);
++ struct watcher_entry *e, *e2;
++
++ mutex_lock(&smi_watchers_mutex);
++
++ mutex_lock(&ipmi_interfaces_mutex);
++
++ /* Build a list of things to deliver. */
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ if (intf->intf_num == -1)
++ continue;
++ e = kmalloc(sizeof(*e), GFP_KERNEL);
++ if (!e)
++ goto out_err;
++ kref_get(&intf->refcount);
++ e->intf = intf;
++ e->intf_num = intf->intf_num;
++ list_add_tail(&e->link, &to_deliver);
++ }
++
++ /* We will succeed, so add it to the list. */
++ list_add(&watcher->link, &smi_watchers);
++
++ mutex_unlock(&ipmi_interfaces_mutex);
++
++ list_for_each_entry_safe(e, e2, &to_deliver, link) {
++ list_del(&e->link);
++ watcher->new_smi(e->intf_num, e->intf->si_dev);
++ kref_put(&e->intf->refcount, intf_free);
++ kfree(e);
++ }
++
++ mutex_unlock(&smi_watchers_mutex);
++
++ return 0;
++
++ out_err:
++ mutex_unlock(&ipmi_interfaces_mutex);
++ mutex_unlock(&smi_watchers_mutex);
++ list_for_each_entry_safe(e, e2, &to_deliver, link) {
++ list_del(&e->link);
++ kref_put(&e->intf->refcount, intf_free);
++ kfree(e);
++ }
++ return -ENOMEM;
++}
++
++int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher)
++{
++ mutex_lock(&smi_watchers_mutex);
++ list_del(&(watcher->link));
++ mutex_unlock(&smi_watchers_mutex);
++ return 0;
++}
++
++/*
++ * Must be called with smi_watchers_mutex held.
++ */
++static void
++call_smi_watchers(int i, struct device *dev)
++{
++ struct ipmi_smi_watcher *w;
++
++ list_for_each_entry(w, &smi_watchers, link) {
++ if (try_module_get(w->owner)) {
++ w->new_smi(i, dev);
++ module_put(w->owner);
++ }
++ }
++}
++
++static int
++ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2)
++{
++ if (addr1->addr_type != addr2->addr_type)
++ return 0;
++
++ if (addr1->channel != addr2->channel)
++ return 0;
++
++ if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
++ struct ipmi_system_interface_addr *smi_addr1
++ = (struct ipmi_system_interface_addr *) addr1;
++ struct ipmi_system_interface_addr *smi_addr2
++ = (struct ipmi_system_interface_addr *) addr2;
++ return (smi_addr1->lun == smi_addr2->lun);
++ }
++
++ if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
++ || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
++ {
++ struct ipmi_ipmb_addr *ipmb_addr1
++ = (struct ipmi_ipmb_addr *) addr1;
++ struct ipmi_ipmb_addr *ipmb_addr2
++ = (struct ipmi_ipmb_addr *) addr2;
++
++ return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr)
++ && (ipmb_addr1->lun == ipmb_addr2->lun));
++ }
++
++ if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
++ struct ipmi_lan_addr *lan_addr1
++ = (struct ipmi_lan_addr *) addr1;
++ struct ipmi_lan_addr *lan_addr2
++ = (struct ipmi_lan_addr *) addr2;
++
++ return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID)
++ && (lan_addr1->local_SWID == lan_addr2->local_SWID)
++ && (lan_addr1->session_handle
++ == lan_addr2->session_handle)
++ && (lan_addr1->lun == lan_addr2->lun));
++ }
++
++ return 1;
++}
++
++int ipmi_validate_addr(struct ipmi_addr *addr, int len)
++{
++ if (len < sizeof(struct ipmi_system_interface_addr)) {
++ return -EINVAL;
++ }
++
++ if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
++ if (addr->channel != IPMI_BMC_CHANNEL)
++ return -EINVAL;
++ return 0;
++ }
++
++ if ((addr->channel == IPMI_BMC_CHANNEL)
++ || (addr->channel >= IPMI_MAX_CHANNELS)
++ || (addr->channel < 0))
++ return -EINVAL;
++
++ if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
++ || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
++ {
++ if (len < sizeof(struct ipmi_ipmb_addr)) {
++ return -EINVAL;
++ }
++ return 0;
++ }
++
++ if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
++ if (len < sizeof(struct ipmi_lan_addr)) {
++ return -EINVAL;
++ }
++ return 0;
++ }
++
++ return -EINVAL;
++}
++
++unsigned int ipmi_addr_length(int addr_type)
++{
++ if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
++ return sizeof(struct ipmi_system_interface_addr);
++
++ if ((addr_type == IPMI_IPMB_ADDR_TYPE)
++ || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
++ {
++ return sizeof(struct ipmi_ipmb_addr);
++ }
++
++ if (addr_type == IPMI_LAN_ADDR_TYPE)
++ return sizeof(struct ipmi_lan_addr);
++
++ return 0;
++}
++
++static void deliver_response(struct ipmi_recv_msg *msg)
++{
++ if (!msg->user) {
++ ipmi_smi_t intf = msg->user_msg_data;
++ unsigned long flags;
++
++ /* Special handling for NULL users. */
++ if (intf->null_user_handler) {
++ intf->null_user_handler(intf, msg);
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->handled_local_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ } else {
++ /* No handler, so give up. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->unhandled_local_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ }
++ ipmi_free_recv_msg(msg);
++ } else {
++ ipmi_user_t user = msg->user;
++ user->handler->ipmi_recv_hndl(msg, user->handler_data);
++ }
++}
++
++static void
++deliver_err_response(struct ipmi_recv_msg *msg, int err)
++{
++ msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
++ msg->msg_data[0] = err;
++ msg->msg.netfn |= 1; /* Convert to a response. */
++ msg->msg.data_len = 1;
++ msg->msg.data = msg->msg_data;
++ deliver_response(msg);
++}
++
++/* Find the next sequence number not being used and add the given
++ message with the given timeout to the sequence table. This must be
++ called with the interface's seq_lock held. */
++static int intf_next_seq(ipmi_smi_t intf,
++ struct ipmi_recv_msg *recv_msg,
++ unsigned long timeout,
++ int retries,
++ int broadcast,
++ unsigned char *seq,
++ long *seqid)
++{
++ int rv = 0;
++ unsigned int i;
++
++ for (i = intf->curr_seq;
++ (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq;
++ i = (i+1)%IPMI_IPMB_NUM_SEQ)
++ {
++ if (!intf->seq_table[i].inuse)
++ break;
++ }
++
++ if (!intf->seq_table[i].inuse) {
++ intf->seq_table[i].recv_msg = recv_msg;
++
++ /* Start with the maximum timeout, when the send response
++ comes in we will start the real timer. */
++ intf->seq_table[i].timeout = MAX_MSG_TIMEOUT;
++ intf->seq_table[i].orig_timeout = timeout;
++ intf->seq_table[i].retries_left = retries;
++ intf->seq_table[i].broadcast = broadcast;
++ intf->seq_table[i].inuse = 1;
++ intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid);
++ *seq = i;
++ *seqid = intf->seq_table[i].seqid;
++ intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ;
++ } else {
++ rv = -EAGAIN;
++ }
++
++ return rv;
++}
++
++/* Return the receive message for the given sequence number and
++ release the sequence number so it can be reused. Some other data
++ is passed in to be sure the message matches up correctly (to help
++ guard against message coming in after their timeout and the
++ sequence number being reused). */
++static int intf_find_seq(ipmi_smi_t intf,
++ unsigned char seq,
++ short channel,
++ unsigned char cmd,
++ unsigned char netfn,
++ struct ipmi_addr *addr,
++ struct ipmi_recv_msg **recv_msg)
++{
++ int rv = -ENODEV;
++ unsigned long flags;
++
++ if (seq >= IPMI_IPMB_NUM_SEQ)
++ return -EINVAL;
++
++ spin_lock_irqsave(&(intf->seq_lock), flags);
++ if (intf->seq_table[seq].inuse) {
++ struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg;
++
++ if ((msg->addr.channel == channel)
++ && (msg->msg.cmd == cmd)
++ && (msg->msg.netfn == netfn)
++ && (ipmi_addr_equal(addr, &(msg->addr))))
++ {
++ *recv_msg = msg;
++ intf->seq_table[seq].inuse = 0;
++ rv = 0;
++ }
++ }
++ spin_unlock_irqrestore(&(intf->seq_lock), flags);
++
++ return rv;
++}
++
++
++/* Start the timer for a specific sequence table entry. */
++static int intf_start_seq_timer(ipmi_smi_t intf,
++ long msgid)
++{
++ int rv = -ENODEV;
++ unsigned long flags;
++ unsigned char seq;
++ unsigned long seqid;
++
++
++ GET_SEQ_FROM_MSGID(msgid, seq, seqid);
++
++ spin_lock_irqsave(&(intf->seq_lock), flags);
++ /* We do this verification because the user can be deleted
++ while a message is outstanding. */
++ if ((intf->seq_table[seq].inuse)
++ && (intf->seq_table[seq].seqid == seqid))
++ {
++ struct seq_table *ent = &(intf->seq_table[seq]);
++ ent->timeout = ent->orig_timeout;
++ rv = 0;
++ }
++ spin_unlock_irqrestore(&(intf->seq_lock), flags);
++
++ return rv;
++}
++
++/* Got an error for the send message for a specific sequence number. */
++static int intf_err_seq(ipmi_smi_t intf,
++ long msgid,
++ unsigned int err)
++{
++ int rv = -ENODEV;
++ unsigned long flags;
++ unsigned char seq;
++ unsigned long seqid;
++ struct ipmi_recv_msg *msg = NULL;
++
++
++ GET_SEQ_FROM_MSGID(msgid, seq, seqid);
++
++ spin_lock_irqsave(&(intf->seq_lock), flags);
++ /* We do this verification because the user can be deleted
++ while a message is outstanding. */
++ if ((intf->seq_table[seq].inuse)
++ && (intf->seq_table[seq].seqid == seqid))
++ {
++ struct seq_table *ent = &(intf->seq_table[seq]);
++
++ ent->inuse = 0;
++ msg = ent->recv_msg;
++ rv = 0;
++ }
++ spin_unlock_irqrestore(&(intf->seq_lock), flags);
++
++ if (msg)
++ deliver_err_response(msg, err);
++
++ return rv;
++}
++
++
++int ipmi_create_user(unsigned int if_num,
++ struct ipmi_user_hndl *handler,
++ void *handler_data,
++ ipmi_user_t *user)
++{
++ unsigned long flags;
++ ipmi_user_t new_user;
++ int rv = 0;
++ ipmi_smi_t intf;
++
++ /* There is no module usecount here, because it's not
++ required. Since this can only be used by and called from
++ other modules, they will implicitly use this module, and
++ thus this can't be removed unless the other modules are
++ removed. */
++
++ if (handler == NULL)
++ return -EINVAL;
++
++ /* Make sure the driver is actually initialized, this handles
++ problems with initialization order. */
++ if (!initialized) {
++ rv = ipmi_init_msghandler();
++ if (rv)
++ return rv;
++
++ /* The init code doesn't return an error if it was turned
++ off, but it won't initialize. Check that. */
++ if (!initialized)
++ return -ENODEV;
++ }
++
++ new_user = kmalloc(sizeof(*new_user), GFP_KERNEL);
++ if (!new_user)
++ return -ENOMEM;
++
++ mutex_lock(&ipmi_interfaces_mutex);
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ if (intf->intf_num == if_num)
++ goto found;
++ }
++ /* Not found, return an error */
++ rv = -EINVAL;
++ goto out_kfree;
++
++ found:
++ /* Note that each existing user holds a refcount to the interface. */
++ kref_get(&intf->refcount);
++
++ kref_init(&new_user->refcount);
++ new_user->handler = handler;
++ new_user->handler_data = handler_data;
++ new_user->intf = intf;
++ new_user->gets_events = 0;
++
++ if (!try_module_get(intf->handlers->owner)) {
++ rv = -ENODEV;
++ goto out_kref;
++ }
++
++ if (intf->handlers->inc_usecount) {
++ rv = intf->handlers->inc_usecount(intf->send_info);
++ if (rv) {
++ module_put(intf->handlers->owner);
++ goto out_kref;
++ }
++ }
++
++ /* Hold the lock so intf->handlers is guaranteed to be good
++ * until now */
++ mutex_unlock(&ipmi_interfaces_mutex);
++
++ new_user->valid = 1;
++ spin_lock_irqsave(&intf->seq_lock, flags);
++ list_add_rcu(&new_user->link, &intf->users);
++ spin_unlock_irqrestore(&intf->seq_lock, flags);
++ *user = new_user;
++ return 0;
++
++out_kref:
++ kref_put(&intf->refcount, intf_free);
++out_kfree:
++ mutex_unlock(&ipmi_interfaces_mutex);
++ kfree(new_user);
++ return rv;
++}
++
++static void free_user(struct kref *ref)
++{
++ ipmi_user_t user = container_of(ref, struct ipmi_user, refcount);
++ kfree(user);
++}
++
++int ipmi_destroy_user(ipmi_user_t user)
++{
++ ipmi_smi_t intf = user->intf;
++ int i;
++ unsigned long flags;
++ struct cmd_rcvr *rcvr;
++ struct cmd_rcvr *rcvrs = NULL;
++
++ user->valid = 0;
++
++ /* Remove the user from the interface's sequence table. */
++ spin_lock_irqsave(&intf->seq_lock, flags);
++ list_del_rcu(&user->link);
++
++ for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) {
++ if (intf->seq_table[i].inuse
++ && (intf->seq_table[i].recv_msg->user == user))
++ {
++ intf->seq_table[i].inuse = 0;
++ ipmi_free_recv_msg(intf->seq_table[i].recv_msg);
++ }
++ }
++ spin_unlock_irqrestore(&intf->seq_lock, flags);
++
++ /*
++ * Remove the user from the command receiver's table. First
++ * we build a list of everything (not using the standard link,
++ * since other things may be using it till we do
++ * synchronize_rcu()) then free everything in that list.
++ */
++ mutex_lock(&intf->cmd_rcvrs_mutex);
++ list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
++ if (rcvr->user == user) {
++ list_del_rcu(&rcvr->link);
++ rcvr->next = rcvrs;
++ rcvrs = rcvr;
++ }
++ }
++ mutex_unlock(&intf->cmd_rcvrs_mutex);
++ synchronize_rcu();
++ while (rcvrs) {
++ rcvr = rcvrs;
++ rcvrs = rcvr->next;
++ kfree(rcvr);
++ }
++
++ mutex_lock(&ipmi_interfaces_mutex);
++ if (intf->handlers) {
++ module_put(intf->handlers->owner);
++ if (intf->handlers->dec_usecount)
++ intf->handlers->dec_usecount(intf->send_info);
++ }
++ mutex_unlock(&ipmi_interfaces_mutex);
++
++ kref_put(&intf->refcount, intf_free);
++
++ kref_put(&user->refcount, free_user);
++
++ return 0;
++}
++
++void ipmi_get_version(ipmi_user_t user,
++ unsigned char *major,
++ unsigned char *minor)
++{
++ *major = user->intf->ipmi_version_major;
++ *minor = user->intf->ipmi_version_minor;
++}
++
++int ipmi_set_my_address(ipmi_user_t user,
++ unsigned int channel,
++ unsigned char address)
++{
++ if (channel >= IPMI_MAX_CHANNELS)
++ return -EINVAL;
++ user->intf->channels[channel].address = address;
++ return 0;
++}
++
++int ipmi_get_my_address(ipmi_user_t user,
++ unsigned int channel,
++ unsigned char *address)
++{
++ if (channel >= IPMI_MAX_CHANNELS)
++ return -EINVAL;
++ *address = user->intf->channels[channel].address;
++ return 0;
++}
++
++int ipmi_set_my_LUN(ipmi_user_t user,
++ unsigned int channel,
++ unsigned char LUN)
++{
++ if (channel >= IPMI_MAX_CHANNELS)
++ return -EINVAL;
++ user->intf->channels[channel].lun = LUN & 0x3;
++ return 0;
++}
++
++int ipmi_get_my_LUN(ipmi_user_t user,
++ unsigned int channel,
++ unsigned char *address)
++{
++ if (channel >= IPMI_MAX_CHANNELS)
++ return -EINVAL;
++ *address = user->intf->channels[channel].lun;
++ return 0;
++}
++
++int ipmi_get_maintenance_mode(ipmi_user_t user)
++{
++ int mode;
++ unsigned long flags;
++
++ spin_lock_irqsave(&user->intf->maintenance_mode_lock, flags);
++ mode = user->intf->maintenance_mode;
++ spin_unlock_irqrestore(&user->intf->maintenance_mode_lock, flags);
++
++ return mode;
++}
++EXPORT_SYMBOL(ipmi_get_maintenance_mode);
++
++static void maintenance_mode_update(ipmi_smi_t intf)
++{
++ if (intf->handlers->set_maintenance_mode)
++ intf->handlers->set_maintenance_mode(
++ intf->send_info, intf->maintenance_mode_enable);
++}
++
++int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
++{
++ int rv = 0;
++ unsigned long flags;
++ ipmi_smi_t intf = user->intf;
++
++ spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
++ if (intf->maintenance_mode != mode) {
++ switch (mode) {
++ case IPMI_MAINTENANCE_MODE_AUTO:
++ intf->maintenance_mode = mode;
++ intf->maintenance_mode_enable
++ = (intf->auto_maintenance_timeout > 0);
++ break;
++
++ case IPMI_MAINTENANCE_MODE_OFF:
++ intf->maintenance_mode = mode;
++ intf->maintenance_mode_enable = 0;
++ break;
++
++ case IPMI_MAINTENANCE_MODE_ON:
++ intf->maintenance_mode = mode;
++ intf->maintenance_mode_enable = 1;
++ break;
++
++ default:
++ rv = -EINVAL;
++ goto out_unlock;
++ }
++
++ maintenance_mode_update(intf);
++ }
++ out_unlock:
++ spin_unlock_irqrestore(&intf->maintenance_mode_lock, flags);
++
++ return rv;
++}
++EXPORT_SYMBOL(ipmi_set_maintenance_mode);
++
++int ipmi_set_gets_events(ipmi_user_t user, int val)
++{
++ unsigned long flags;
++ ipmi_smi_t intf = user->intf;
++ struct ipmi_recv_msg *msg, *msg2;
++ struct list_head msgs;
++
++ INIT_LIST_HEAD(&msgs);
++
++ spin_lock_irqsave(&intf->events_lock, flags);
++ user->gets_events = val;
++
++ if (intf->delivering_events)
++ /*
++ * Another thread is delivering events for this, so
++ * let it handle any new events.
++ */
++ goto out;
++
++ /* Deliver any queued events. */
++ while (user->gets_events && !list_empty(&intf->waiting_events)) {
++ list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link)
++ list_move_tail(&msg->link, &msgs);
++ intf->waiting_events_count = 0;
++
++ intf->delivering_events = 1;
++ spin_unlock_irqrestore(&intf->events_lock, flags);
++
++ list_for_each_entry_safe(msg, msg2, &msgs, link) {
++ msg->user = user;
++ kref_get(&user->refcount);
++ deliver_response(msg);
++ }
++
++ spin_lock_irqsave(&intf->events_lock, flags);
++ intf->delivering_events = 0;
++ }
++
++ out:
++ spin_unlock_irqrestore(&intf->events_lock, flags);
++
++ return 0;
++}
++
++static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t intf,
++ unsigned char netfn,
++ unsigned char cmd,
++ unsigned char chan)
++{
++ struct cmd_rcvr *rcvr;
++
++ list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
++ if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)
++ && (rcvr->chans & (1 << chan)))
++ return rcvr;
++ }
++ return NULL;
++}
++
++static int is_cmd_rcvr_exclusive(ipmi_smi_t intf,
++ unsigned char netfn,
++ unsigned char cmd,
++ unsigned int chans)
++{
++ struct cmd_rcvr *rcvr;
++
++ list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
++ if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)
++ && (rcvr->chans & chans))
++ return 0;
++ }
++ return 1;
++}
++
++int ipmi_register_for_cmd(ipmi_user_t user,
++ unsigned char netfn,
++ unsigned char cmd,
++ unsigned int chans)
++{
++ ipmi_smi_t intf = user->intf;
++ struct cmd_rcvr *rcvr;
++ int rv = 0;
++
++
++ rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL);
++ if (!rcvr)
++ return -ENOMEM;
++ rcvr->cmd = cmd;
++ rcvr->netfn = netfn;
++ rcvr->chans = chans;
++ rcvr->user = user;
++
++ mutex_lock(&intf->cmd_rcvrs_mutex);
++ /* Make sure the command/netfn is not already registered. */
++ if (!is_cmd_rcvr_exclusive(intf, netfn, cmd, chans)) {
++ rv = -EBUSY;
++ goto out_unlock;
++ }
++
++ list_add_rcu(&rcvr->link, &intf->cmd_rcvrs);
++
++ out_unlock:
++ mutex_unlock(&intf->cmd_rcvrs_mutex);
++ if (rv)
++ kfree(rcvr);
++
++ return rv;
++}
++
++int ipmi_unregister_for_cmd(ipmi_user_t user,
++ unsigned char netfn,
++ unsigned char cmd,
++ unsigned int chans)
++{
++ ipmi_smi_t intf = user->intf;
++ struct cmd_rcvr *rcvr;
++ struct cmd_rcvr *rcvrs = NULL;
++ int i, rv = -ENOENT;
++
++ mutex_lock(&intf->cmd_rcvrs_mutex);
++ for (i = 0; i < IPMI_NUM_CHANNELS; i++) {
++ if (((1 << i) & chans) == 0)
++ continue;
++ rcvr = find_cmd_rcvr(intf, netfn, cmd, i);
++ if (rcvr == NULL)
++ continue;
++ if (rcvr->user == user) {
++ rv = 0;
++ rcvr->chans &= ~chans;
++ if (rcvr->chans == 0) {
++ list_del_rcu(&rcvr->link);
++ rcvr->next = rcvrs;
++ rcvrs = rcvr;
++ }
++ }
++ }
++ mutex_unlock(&intf->cmd_rcvrs_mutex);
++ synchronize_rcu();
++ while (rcvrs) {
++ rcvr = rcvrs;
++ rcvrs = rcvr->next;
++ kfree(rcvr);
++ }
++ return rv;
++}
++
++void ipmi_user_set_run_to_completion(ipmi_user_t user, int val)
++{
++ ipmi_smi_t intf = user->intf;
++ if (intf->handlers)
++ intf->handlers->set_run_to_completion(intf->send_info, val);
++}
++
++static unsigned char
++ipmb_checksum(unsigned char *data, int size)
++{
++ unsigned char csum = 0;
++
++ for (; size > 0; size--, data++)
++ csum += *data;
++
++ return -csum;
++}
++
++static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg,
++ struct kernel_ipmi_msg *msg,
++ struct ipmi_ipmb_addr *ipmb_addr,
++ long msgid,
++ unsigned char ipmb_seq,
++ int broadcast,
++ unsigned char source_address,
++ unsigned char source_lun)
++{
++ int i = broadcast;
++
++ /* Format the IPMB header data. */
++ smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
++ smi_msg->data[1] = IPMI_SEND_MSG_CMD;
++ smi_msg->data[2] = ipmb_addr->channel;
++ if (broadcast)
++ smi_msg->data[3] = 0;
++ smi_msg->data[i+3] = ipmb_addr->slave_addr;
++ smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3);
++ smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2);
++ smi_msg->data[i+6] = source_address;
++ smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun;
++ smi_msg->data[i+8] = msg->cmd;
++
++ /* Now tack on the data to the message. */
++ if (msg->data_len > 0)
++ memcpy(&(smi_msg->data[i+9]), msg->data,
++ msg->data_len);
++ smi_msg->data_size = msg->data_len + 9;
++
++ /* Now calculate the checksum and tack it on. */
++ smi_msg->data[i+smi_msg->data_size]
++ = ipmb_checksum(&(smi_msg->data[i+6]),
++ smi_msg->data_size-6);
++
++ /* Add on the checksum size and the offset from the
++ broadcast. */
++ smi_msg->data_size += 1 + i;
++
++ smi_msg->msgid = msgid;
++}
++
++static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg,
++ struct kernel_ipmi_msg *msg,
++ struct ipmi_lan_addr *lan_addr,
++ long msgid,
++ unsigned char ipmb_seq,
++ unsigned char source_lun)
++{
++ /* Format the IPMB header data. */
++ smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
++ smi_msg->data[1] = IPMI_SEND_MSG_CMD;
++ smi_msg->data[2] = lan_addr->channel;
++ smi_msg->data[3] = lan_addr->session_handle;
++ smi_msg->data[4] = lan_addr->remote_SWID;
++ smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3);
++ smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2);
++ smi_msg->data[7] = lan_addr->local_SWID;
++ smi_msg->data[8] = (ipmb_seq << 2) | source_lun;
++ smi_msg->data[9] = msg->cmd;
++
++ /* Now tack on the data to the message. */
++ if (msg->data_len > 0)
++ memcpy(&(smi_msg->data[10]), msg->data,
++ msg->data_len);
++ smi_msg->data_size = msg->data_len + 10;
++
++ /* Now calculate the checksum and tack it on. */
++ smi_msg->data[smi_msg->data_size]
++ = ipmb_checksum(&(smi_msg->data[7]),
++ smi_msg->data_size-7);
++
++ /* Add on the checksum size and the offset from the
++ broadcast. */
++ smi_msg->data_size += 1;
++
++ smi_msg->msgid = msgid;
++}
++
++/* Separate from ipmi_request so that the user does not have to be
++ supplied in certain circumstances (mainly at panic time). If
++ messages are supplied, they will be freed, even if an error
++ occurs. */
++static int i_ipmi_request(ipmi_user_t user,
++ ipmi_smi_t intf,
++ struct ipmi_addr *addr,
++ long msgid,
++ struct kernel_ipmi_msg *msg,
++ void *user_msg_data,
++ void *supplied_smi,
++ struct ipmi_recv_msg *supplied_recv,
++ int priority,
++ unsigned char source_address,
++ unsigned char source_lun,
++ int retries,
++ unsigned int retry_time_ms)
++{
++ int rv = 0;
++ struct ipmi_smi_msg *smi_msg;
++ struct ipmi_recv_msg *recv_msg;
++ unsigned long flags;
++ struct ipmi_smi_handlers *handlers;
++
++
++ if (supplied_recv) {
++ recv_msg = supplied_recv;
++ } else {
++ recv_msg = ipmi_alloc_recv_msg();
++ if (recv_msg == NULL) {
++ return -ENOMEM;
++ }
++ }
++ recv_msg->user_msg_data = user_msg_data;
++
++ if (supplied_smi) {
++ smi_msg = (struct ipmi_smi_msg *) supplied_smi;
++ } else {
++ smi_msg = ipmi_alloc_smi_msg();
++ if (smi_msg == NULL) {
++ ipmi_free_recv_msg(recv_msg);
++ return -ENOMEM;
++ }
++ }
++
++ rcu_read_lock();
++ handlers = intf->handlers;
++ if (!handlers) {
++ rv = -ENODEV;
++ goto out_err;
++ }
++
++ recv_msg->user = user;
++ if (user)
++ kref_get(&user->refcount);
++ recv_msg->msgid = msgid;
++ /* Store the message to send in the receive message so timeout
++ responses can get the proper response data. */
++ recv_msg->msg = *msg;
++
++ if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) {
++ struct ipmi_system_interface_addr *smi_addr;
++
++ if (msg->netfn & 1) {
++ /* Responses are not allowed to the SMI. */
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ smi_addr = (struct ipmi_system_interface_addr *) addr;
++ if (smi_addr->lun > 3) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr));
++
++ if ((msg->netfn == IPMI_NETFN_APP_REQUEST)
++ && ((msg->cmd == IPMI_SEND_MSG_CMD)
++ || (msg->cmd == IPMI_GET_MSG_CMD)
++ || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD)))
++ {
++ /* We don't let the user do these, since we manage
++ the sequence numbers. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ if (((msg->netfn == IPMI_NETFN_APP_REQUEST)
++ && ((msg->cmd == IPMI_COLD_RESET_CMD)
++ || (msg->cmd == IPMI_WARM_RESET_CMD)))
++ || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST))
++ {
++ spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
++ intf->auto_maintenance_timeout
++ = IPMI_MAINTENANCE_MODE_TIMEOUT;
++ if (!intf->maintenance_mode
++ && !intf->maintenance_mode_enable)
++ {
++ intf->maintenance_mode_enable = 1;
++ maintenance_mode_update(intf);
++ }
++ spin_unlock_irqrestore(&intf->maintenance_mode_lock,
++ flags);
++ }
++
++ if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EMSGSIZE;
++ goto out_err;
++ }
++
++ smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3);
++ smi_msg->data[1] = msg->cmd;
++ smi_msg->msgid = msgid;
++ smi_msg->user_data = recv_msg;
++ if (msg->data_len > 0)
++ memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
++ smi_msg->data_size = msg->data_len + 2;
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_local_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
++ || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE))
++ {
++ struct ipmi_ipmb_addr *ipmb_addr;
++ unsigned char ipmb_seq;
++ long seqid;
++ int broadcast = 0;
++
++ if (addr->channel >= IPMI_MAX_CHANNELS) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ if (intf->channels[addr->channel].medium
++ != IPMI_CHANNEL_MEDIUM_IPMB)
++ {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ if (retries < 0) {
++ if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)
++ retries = 0; /* Don't retry broadcasts. */
++ else
++ retries = 4;
++ }
++ if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) {
++ /* Broadcasts add a zero at the beginning of the
++ message, but otherwise is the same as an IPMB
++ address. */
++ addr->addr_type = IPMI_IPMB_ADDR_TYPE;
++ broadcast = 1;
++ }
++
++
++ /* Default to 1 second retries. */
++ if (retry_time_ms == 0)
++ retry_time_ms = 1000;
++
++ /* 9 for the header and 1 for the checksum, plus
++ possibly one for the broadcast. */
++ if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EMSGSIZE;
++ goto out_err;
++ }
++
++ ipmb_addr = (struct ipmi_ipmb_addr *) addr;
++ if (ipmb_addr->lun > 3) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr));
++
++ if (recv_msg->msg.netfn & 0x1) {
++ /* It's a response, so use the user's sequence
++ from msgid. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_ipmb_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid,
++ msgid, broadcast,
++ source_address, source_lun);
++
++ /* Save the receive message so we can use it
++ to deliver the response. */
++ smi_msg->user_data = recv_msg;
++ } else {
++ /* It's a command, so get a sequence for it. */
++
++ spin_lock_irqsave(&(intf->seq_lock), flags);
++
++ spin_lock(&intf->counter_lock);
++ intf->sent_ipmb_commands++;
++ spin_unlock(&intf->counter_lock);
++
++ /* Create a sequence number with a 1 second
++ timeout and 4 retries. */
++ rv = intf_next_seq(intf,
++ recv_msg,
++ retry_time_ms,
++ retries,
++ broadcast,
++ &ipmb_seq,
++ &seqid);
++ if (rv) {
++ /* We have used up all the sequence numbers,
++ probably, so abort. */
++ spin_unlock_irqrestore(&(intf->seq_lock),
++ flags);
++ goto out_err;
++ }
++
++ /* Store the sequence number in the message,
++ so that when the send message response
++ comes back we can start the timer. */
++ format_ipmb_msg(smi_msg, msg, ipmb_addr,
++ STORE_SEQ_IN_MSGID(ipmb_seq, seqid),
++ ipmb_seq, broadcast,
++ source_address, source_lun);
++
++ /* Copy the message into the recv message data, so we
++ can retransmit it later if necessary. */
++ memcpy(recv_msg->msg_data, smi_msg->data,
++ smi_msg->data_size);
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = smi_msg->data_size;
++
++ /* We don't unlock until here, because we need
++ to copy the completed message into the
++ recv_msg before we release the lock.
++ Otherwise, race conditions may bite us. I
++ know that's pretty paranoid, but I prefer
++ to be correct. */
++ spin_unlock_irqrestore(&(intf->seq_lock), flags);
++ }
++ } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
++ struct ipmi_lan_addr *lan_addr;
++ unsigned char ipmb_seq;
++ long seqid;
++
++ if (addr->channel >= IPMI_MAX_CHANNELS) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ if ((intf->channels[addr->channel].medium
++ != IPMI_CHANNEL_MEDIUM_8023LAN)
++ && (intf->channels[addr->channel].medium
++ != IPMI_CHANNEL_MEDIUM_ASYNC))
++ {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ retries = 4;
++
++ /* Default to 1 second retries. */
++ if (retry_time_ms == 0)
++ retry_time_ms = 1000;
++
++ /* 11 for the header and 1 for the checksum. */
++ if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EMSGSIZE;
++ goto out_err;
++ }
++
++ lan_addr = (struct ipmi_lan_addr *) addr;
++ if (lan_addr->lun > 3) {
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++ memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr));
++
++ if (recv_msg->msg.netfn & 0x1) {
++ /* It's a response, so use the user's sequence
++ from msgid. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_lan_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ format_lan_msg(smi_msg, msg, lan_addr, msgid,
++ msgid, source_lun);
++
++ /* Save the receive message so we can use it
++ to deliver the response. */
++ smi_msg->user_data = recv_msg;
++ } else {
++ /* It's a command, so get a sequence for it. */
++
++ spin_lock_irqsave(&(intf->seq_lock), flags);
++
++ spin_lock(&intf->counter_lock);
++ intf->sent_lan_commands++;
++ spin_unlock(&intf->counter_lock);
++
++ /* Create a sequence number with a 1 second
++ timeout and 4 retries. */
++ rv = intf_next_seq(intf,
++ recv_msg,
++ retry_time_ms,
++ retries,
++ 0,
++ &ipmb_seq,
++ &seqid);
++ if (rv) {
++ /* We have used up all the sequence numbers,
++ probably, so abort. */
++ spin_unlock_irqrestore(&(intf->seq_lock),
++ flags);
++ goto out_err;
++ }
++
++ /* Store the sequence number in the message,
++ so that when the send message response
++ comes back we can start the timer. */
++ format_lan_msg(smi_msg, msg, lan_addr,
++ STORE_SEQ_IN_MSGID(ipmb_seq, seqid),
++ ipmb_seq, source_lun);
++
++ /* Copy the message into the recv message data, so we
++ can retransmit it later if necessary. */
++ memcpy(recv_msg->msg_data, smi_msg->data,
++ smi_msg->data_size);
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = smi_msg->data_size;
++
++ /* We don't unlock until here, because we need
++ to copy the completed message into the
++ recv_msg before we release the lock.
++ Otherwise, race conditions may bite us. I
++ know that's pretty paranoid, but I prefer
++ to be correct. */
++ spin_unlock_irqrestore(&(intf->seq_lock), flags);
++ }
++ } else {
++ /* Unknown address type. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->sent_invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ rv = -EINVAL;
++ goto out_err;
++ }
++
++#ifdef DEBUG_MSGING
++ {
++ int m;
++ for (m = 0; m < smi_msg->data_size; m++)
++ printk(" %2.2x", smi_msg->data[m]);
++ printk("\n");
++ }
++#endif
++
++ handlers->sender(intf->send_info, smi_msg, priority);
++ rcu_read_unlock();
++
++ return 0;
++
++ out_err:
++ rcu_read_unlock();
++ ipmi_free_smi_msg(smi_msg);
++ ipmi_free_recv_msg(recv_msg);
++ return rv;
++}
++
++static int check_addr(ipmi_smi_t intf,
++ struct ipmi_addr *addr,
++ unsigned char *saddr,
++ unsigned char *lun)
++{
++ if (addr->channel >= IPMI_MAX_CHANNELS)
++ return -EINVAL;
++ *lun = intf->channels[addr->channel].lun;
++ *saddr = intf->channels[addr->channel].address;
++ return 0;
++}
++
++int ipmi_request_settime(ipmi_user_t user,
++ struct ipmi_addr *addr,
++ long msgid,
++ struct kernel_ipmi_msg *msg,
++ void *user_msg_data,
++ int priority,
++ int retries,
++ unsigned int retry_time_ms)
++{
++ unsigned char saddr, lun;
++ int rv;
++
++ if (!user)
++ return -EINVAL;
++ rv = check_addr(user->intf, addr, &saddr, &lun);
++ if (rv)
++ return rv;
++ return i_ipmi_request(user,
++ user->intf,
++ addr,
++ msgid,
++ msg,
++ user_msg_data,
++ NULL, NULL,
++ priority,
++ saddr,
++ lun,
++ retries,
++ retry_time_ms);
++}
++
++int ipmi_request_supply_msgs(ipmi_user_t user,
++ struct ipmi_addr *addr,
++ long msgid,
++ struct kernel_ipmi_msg *msg,
++ void *user_msg_data,
++ void *supplied_smi,
++ struct ipmi_recv_msg *supplied_recv,
++ int priority)
++{
++ unsigned char saddr, lun;
++ int rv;
++
++ if (!user)
++ return -EINVAL;
++ rv = check_addr(user->intf, addr, &saddr, &lun);
++ if (rv)
++ return rv;
++ return i_ipmi_request(user,
++ user->intf,
++ addr,
++ msgid,
++ msg,
++ user_msg_data,
++ supplied_smi,
++ supplied_recv,
++ priority,
++ saddr,
++ lun,
++ -1, 0);
++}
++
++#ifdef CONFIG_PROC_FS
++static int ipmb_file_read_proc(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ char *out = (char *) page;
++ ipmi_smi_t intf = data;
++ int i;
++ int rv = 0;
++
++ for (i = 0; i < IPMI_MAX_CHANNELS; i++)
++ rv += sprintf(out+rv, "%x ", intf->channels[i].address);
++ out[rv-1] = '\n'; /* Replace the final space with a newline */
++ out[rv] = '\0';
++ rv++;
++ return rv;
++}
++
++static int version_file_read_proc(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ char *out = (char *) page;
++ ipmi_smi_t intf = data;
++
++ return sprintf(out, "%d.%d\n",
++ ipmi_version_major(&intf->bmc->id),
++ ipmi_version_minor(&intf->bmc->id));
++}
++
++static int stat_file_read_proc(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ char *out = (char *) page;
++ ipmi_smi_t intf = data;
++
++ out += sprintf(out, "sent_invalid_commands: %d\n",
++ intf->sent_invalid_commands);
++ out += sprintf(out, "sent_local_commands: %d\n",
++ intf->sent_local_commands);
++ out += sprintf(out, "handled_local_responses: %d\n",
++ intf->handled_local_responses);
++ out += sprintf(out, "unhandled_local_responses: %d\n",
++ intf->unhandled_local_responses);
++ out += sprintf(out, "sent_ipmb_commands: %d\n",
++ intf->sent_ipmb_commands);
++ out += sprintf(out, "sent_ipmb_command_errs: %d\n",
++ intf->sent_ipmb_command_errs);
++ out += sprintf(out, "retransmitted_ipmb_commands: %d\n",
++ intf->retransmitted_ipmb_commands);
++ out += sprintf(out, "timed_out_ipmb_commands: %d\n",
++ intf->timed_out_ipmb_commands);
++ out += sprintf(out, "timed_out_ipmb_broadcasts: %d\n",
++ intf->timed_out_ipmb_broadcasts);
++ out += sprintf(out, "sent_ipmb_responses: %d\n",
++ intf->sent_ipmb_responses);
++ out += sprintf(out, "handled_ipmb_responses: %d\n",
++ intf->handled_ipmb_responses);
++ out += sprintf(out, "invalid_ipmb_responses: %d\n",
++ intf->invalid_ipmb_responses);
++ out += sprintf(out, "unhandled_ipmb_responses: %d\n",
++ intf->unhandled_ipmb_responses);
++ out += sprintf(out, "sent_lan_commands: %d\n",
++ intf->sent_lan_commands);
++ out += sprintf(out, "sent_lan_command_errs: %d\n",
++ intf->sent_lan_command_errs);
++ out += sprintf(out, "retransmitted_lan_commands: %d\n",
++ intf->retransmitted_lan_commands);
++ out += sprintf(out, "timed_out_lan_commands: %d\n",
++ intf->timed_out_lan_commands);
++ out += sprintf(out, "sent_lan_responses: %d\n",
++ intf->sent_lan_responses);
++ out += sprintf(out, "handled_lan_responses: %d\n",
++ intf->handled_lan_responses);
++ out += sprintf(out, "invalid_lan_responses: %d\n",
++ intf->invalid_lan_responses);
++ out += sprintf(out, "unhandled_lan_responses: %d\n",
++ intf->unhandled_lan_responses);
++ out += sprintf(out, "handled_commands: %d\n",
++ intf->handled_commands);
++ out += sprintf(out, "invalid_commands: %d\n",
++ intf->invalid_commands);
++ out += sprintf(out, "unhandled_commands: %d\n",
++ intf->unhandled_commands);
++ out += sprintf(out, "invalid_events: %d\n",
++ intf->invalid_events);
++ out += sprintf(out, "events: %d\n",
++ intf->events);
++
++ return (out - ((char *) page));
++}
++#endif /* CONFIG_PROC_FS */
++
++int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
++ read_proc_t *read_proc, write_proc_t *write_proc,
++ void *data, struct module *owner)
++{
++ int rv = 0;
++#ifdef CONFIG_PROC_FS
++ struct proc_dir_entry *file;
++ struct ipmi_proc_entry *entry;
++
++ /* Create a list element. */
++ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
++ if (!entry)
++ return -ENOMEM;
++ entry->name = kmalloc(strlen(name)+1, GFP_KERNEL);
++ if (!entry->name) {
++ kfree(entry);
++ return -ENOMEM;
++ }
++ strcpy(entry->name, name);
++
++ file = create_proc_entry(name, 0, smi->proc_dir);
++ if (!file) {
++ kfree(entry->name);
++ kfree(entry);
++ rv = -ENOMEM;
++ } else {
++ file->nlink = 1;
++ file->data = data;
++ file->read_proc = read_proc;
++ file->write_proc = write_proc;
++ file->owner = owner;
++
++ spin_lock(&smi->proc_entry_lock);
++ /* Stick it on the list. */
++ entry->next = smi->proc_entries;
++ smi->proc_entries = entry;
++ spin_unlock(&smi->proc_entry_lock);
++ }
++#endif /* CONFIG_PROC_FS */
++
++ return rv;
++}
++
++static int add_proc_entries(ipmi_smi_t smi, int num)
++{
++ int rv = 0;
++
++#ifdef CONFIG_PROC_FS
++ sprintf(smi->proc_dir_name, "%d", num);
++ smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root);
++ if (!smi->proc_dir)
++ rv = -ENOMEM;
++ else {
++ smi->proc_dir->owner = THIS_MODULE;
++ }
++
++ if (rv == 0)
++ rv = ipmi_smi_add_proc_entry(smi, "stats",
++ stat_file_read_proc, NULL,
++ smi, THIS_MODULE);
++
++ if (rv == 0)
++ rv = ipmi_smi_add_proc_entry(smi, "ipmb",
++ ipmb_file_read_proc, NULL,
++ smi, THIS_MODULE);
++
++ if (rv == 0)
++ rv = ipmi_smi_add_proc_entry(smi, "version",
++ version_file_read_proc, NULL,
++ smi, THIS_MODULE);
++#endif /* CONFIG_PROC_FS */
++
++ return rv;
++}
++
++static void remove_proc_entries(ipmi_smi_t smi)
++{
++#ifdef CONFIG_PROC_FS
++ struct ipmi_proc_entry *entry;
++
++ spin_lock(&smi->proc_entry_lock);
++ while (smi->proc_entries) {
++ entry = smi->proc_entries;
++ smi->proc_entries = entry->next;
++
++ remove_proc_entry(entry->name, smi->proc_dir);
++ kfree(entry->name);
++ kfree(entry);
++ }
++ spin_unlock(&smi->proc_entry_lock);
++ remove_proc_entry(smi->proc_dir_name, proc_ipmi_root);
++#endif /* CONFIG_PROC_FS */
++}
++
++static int __find_bmc_guid(struct device *dev, void *data)
++{
++ unsigned char *id = data;
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++ return memcmp(bmc->guid, id, 16) == 0;
++}
++
++static struct bmc_device *ipmi_find_bmc_guid(struct device_driver *drv,
++ unsigned char *guid)
++{
++ struct device *dev;
++
++ dev = driver_find_device(drv, NULL, guid, __find_bmc_guid);
++ if (dev)
++ return dev_get_drvdata(dev);
++ else
++ return NULL;
++}
++
++struct prod_dev_id {
++ unsigned int product_id;
++ unsigned char device_id;
++};
++
++static int __find_bmc_prod_dev_id(struct device *dev, void *data)
++{
++ struct prod_dev_id *id = data;
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return (bmc->id.product_id == id->product_id
++ && bmc->id.device_id == id->device_id);
++}
++
++static struct bmc_device *ipmi_find_bmc_prod_dev_id(
++ struct device_driver *drv,
++ unsigned int product_id, unsigned char device_id)
++{
++ struct prod_dev_id id = {
++ .product_id = product_id,
++ .device_id = device_id,
++ };
++ struct device *dev;
++
++ dev = driver_find_device(drv, NULL, &id, __find_bmc_prod_dev_id);
++ if (dev)
++ return dev_get_drvdata(dev);
++ else
++ return NULL;
++}
++
++static ssize_t device_id_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 10, "%u\n", bmc->id.device_id);
++}
++
++static ssize_t provides_dev_sdrs_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 10, "%u\n",
++ (bmc->id.device_revision & 0x80) >> 7);
++}
++
++static ssize_t revision_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 20, "%u\n",
++ bmc->id.device_revision & 0x0F);
++}
++
++static ssize_t firmware_rev_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 20, "%u.%x\n", bmc->id.firmware_revision_1,
++ bmc->id.firmware_revision_2);
++}
++
++static ssize_t ipmi_version_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 20, "%u.%u\n",
++ ipmi_version_major(&bmc->id),
++ ipmi_version_minor(&bmc->id));
++}
++
++static ssize_t add_dev_support_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 10, "0x%02x\n",
++ bmc->id.additional_device_support);
++}
++
++static ssize_t manufacturer_id_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 20, "0x%6.6x\n", bmc->id.manufacturer_id);
++}
++
++static ssize_t product_id_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 10, "0x%4.4x\n", bmc->id.product_id);
++}
++
++static ssize_t aux_firmware_rev_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 21, "0x%02x 0x%02x 0x%02x 0x%02x\n",
++ bmc->id.aux_firmware_revision[3],
++ bmc->id.aux_firmware_revision[2],
++ bmc->id.aux_firmware_revision[1],
++ bmc->id.aux_firmware_revision[0]);
++}
++
++static ssize_t guid_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct bmc_device *bmc = dev_get_drvdata(dev);
++
++ return snprintf(buf, 100, "%Lx%Lx\n",
++ (long long) bmc->guid[0],
++ (long long) bmc->guid[8]);
++}
++
++static void remove_files(struct bmc_device *bmc)
++{
++ if (!bmc->dev)
++ return;
++
++ device_remove_file(&bmc->dev->dev,
++ &bmc->device_id_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->provides_dev_sdrs_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->revision_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->firmware_rev_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->version_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->add_dev_support_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->manufacturer_id_attr);
++ device_remove_file(&bmc->dev->dev,
++ &bmc->product_id_attr);
++
++ if (bmc->id.aux_firmware_revision_set)
++ device_remove_file(&bmc->dev->dev,
++ &bmc->aux_firmware_rev_attr);
++ if (bmc->guid_set)
++ device_remove_file(&bmc->dev->dev,
++ &bmc->guid_attr);
++}
++
++static void
++cleanup_bmc_device(struct kref *ref)
++{
++ struct bmc_device *bmc;
++
++ bmc = container_of(ref, struct bmc_device, refcount);
++
++ remove_files(bmc);
++ platform_device_unregister(bmc->dev);
++ kfree(bmc);
++}
++
++static void ipmi_bmc_unregister(ipmi_smi_t intf)
++{
++ struct bmc_device *bmc = intf->bmc;
++
++ if (intf->sysfs_name) {
++ sysfs_remove_link(&intf->si_dev->kobj, intf->sysfs_name);
++ kfree(intf->sysfs_name);
++ intf->sysfs_name = NULL;
++ }
++ if (intf->my_dev_name) {
++ sysfs_remove_link(&bmc->dev->dev.kobj, intf->my_dev_name);
++ kfree(intf->my_dev_name);
++ intf->my_dev_name = NULL;
++ }
++
++ mutex_lock(&ipmidriver_mutex);
++ kref_put(&bmc->refcount, cleanup_bmc_device);
++ intf->bmc = NULL;
++ mutex_unlock(&ipmidriver_mutex);
++}
++
++static int create_files(struct bmc_device *bmc)
++{
++ int err;
++
++ bmc->device_id_attr.attr.name = "device_id";
++ bmc->device_id_attr.attr.owner = THIS_MODULE;
++ bmc->device_id_attr.attr.mode = S_IRUGO;
++ bmc->device_id_attr.show = device_id_show;
++
++ bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs";
++ bmc->provides_dev_sdrs_attr.attr.owner = THIS_MODULE;
++ bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO;
++ bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show;
++
++ bmc->revision_attr.attr.name = "revision";
++ bmc->revision_attr.attr.owner = THIS_MODULE;
++ bmc->revision_attr.attr.mode = S_IRUGO;
++ bmc->revision_attr.show = revision_show;
++
++ bmc->firmware_rev_attr.attr.name = "firmware_revision";
++ bmc->firmware_rev_attr.attr.owner = THIS_MODULE;
++ bmc->firmware_rev_attr.attr.mode = S_IRUGO;
++ bmc->firmware_rev_attr.show = firmware_rev_show;
++
++ bmc->version_attr.attr.name = "ipmi_version";
++ bmc->version_attr.attr.owner = THIS_MODULE;
++ bmc->version_attr.attr.mode = S_IRUGO;
++ bmc->version_attr.show = ipmi_version_show;
++
++ bmc->add_dev_support_attr.attr.name = "additional_device_support";
++ bmc->add_dev_support_attr.attr.owner = THIS_MODULE;
++ bmc->add_dev_support_attr.attr.mode = S_IRUGO;
++ bmc->add_dev_support_attr.show = add_dev_support_show;
++
++ bmc->manufacturer_id_attr.attr.name = "manufacturer_id";
++ bmc->manufacturer_id_attr.attr.owner = THIS_MODULE;
++ bmc->manufacturer_id_attr.attr.mode = S_IRUGO;
++ bmc->manufacturer_id_attr.show = manufacturer_id_show;
++
++ bmc->product_id_attr.attr.name = "product_id";
++ bmc->product_id_attr.attr.owner = THIS_MODULE;
++ bmc->product_id_attr.attr.mode = S_IRUGO;
++ bmc->product_id_attr.show = product_id_show;
++
++ bmc->guid_attr.attr.name = "guid";
++ bmc->guid_attr.attr.owner = THIS_MODULE;
++ bmc->guid_attr.attr.mode = S_IRUGO;
++ bmc->guid_attr.show = guid_show;
++
++ bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision";
++ bmc->aux_firmware_rev_attr.attr.owner = THIS_MODULE;
++ bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO;
++ bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show;
++
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->device_id_attr);
++ if (err) goto out;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->provides_dev_sdrs_attr);
++ if (err) goto out_devid;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->revision_attr);
++ if (err) goto out_sdrs;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->firmware_rev_attr);
++ if (err) goto out_rev;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->version_attr);
++ if (err) goto out_firm;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->add_dev_support_attr);
++ if (err) goto out_version;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->manufacturer_id_attr);
++ if (err) goto out_add_dev;
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->product_id_attr);
++ if (err) goto out_manu;
++ if (bmc->id.aux_firmware_revision_set) {
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->aux_firmware_rev_attr);
++ if (err) goto out_prod_id;
++ }
++ if (bmc->guid_set) {
++ err = device_create_file(&bmc->dev->dev,
++ &bmc->guid_attr);
++ if (err) goto out_aux_firm;
++ }
++
++ return 0;
++
++out_aux_firm:
++ if (bmc->id.aux_firmware_revision_set)
++ device_remove_file(&bmc->dev->dev,
++ &bmc->aux_firmware_rev_attr);
++out_prod_id:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->product_id_attr);
++out_manu:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->manufacturer_id_attr);
++out_add_dev:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->add_dev_support_attr);
++out_version:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->version_attr);
++out_firm:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->firmware_rev_attr);
++out_rev:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->revision_attr);
++out_sdrs:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->provides_dev_sdrs_attr);
++out_devid:
++ device_remove_file(&bmc->dev->dev,
++ &bmc->device_id_attr);
++out:
++ return err;
++}
++
++static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
++ const char *sysfs_name)
++{
++ int rv;
++ struct bmc_device *bmc = intf->bmc;
++ struct bmc_device *old_bmc;
++ int size;
++ char dummy[1];
++
++ mutex_lock(&ipmidriver_mutex);
++
++ /*
++ * Try to find if there is an bmc_device struct
++ * representing the interfaced BMC already
++ */
++ if (bmc->guid_set)
++ old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid);
++ else
++ old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver,
++ bmc->id.product_id,
++ bmc->id.device_id);
++
++ /*
++ * If there is already an bmc_device, free the new one,
++ * otherwise register the new BMC device
++ */
++ if (old_bmc) {
++ kfree(bmc);
++ intf->bmc = old_bmc;
++ bmc = old_bmc;
++
++ kref_get(&bmc->refcount);
++ mutex_unlock(&ipmidriver_mutex);
++
++ printk(KERN_INFO
++ "ipmi: interfacing existing BMC (man_id: 0x%6.6x,"
++ " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n",
++ bmc->id.manufacturer_id,
++ bmc->id.product_id,
++ bmc->id.device_id);
++ } else {
++ char name[14];
++ unsigned char orig_dev_id = bmc->id.device_id;
++ int warn_printed = 0;
++
++ snprintf(name, sizeof(name),
++ "ipmi_bmc.%4.4x", bmc->id.product_id);
++
++ while (ipmi_find_bmc_prod_dev_id(&ipmidriver,
++ bmc->id.product_id,
++ bmc->id.device_id)) {
++ if (!warn_printed) {
++ printk(KERN_WARNING PFX
++ "This machine has two different BMCs"
++ " with the same product id and device"
++ " id. This is an error in the"
++ " firmware, but incrementing the"
++ " device id to work around the problem."
++ " Prod ID = 0x%x, Dev ID = 0x%x\n",
++ bmc->id.product_id, bmc->id.device_id);
++ warn_printed = 1;
++ }
++ bmc->id.device_id++; /* Wraps at 255 */
++ if (bmc->id.device_id == orig_dev_id) {
++ printk(KERN_ERR PFX
++ "Out of device ids!\n");
++ break;
++ }
++ }
++
++ bmc->dev = platform_device_alloc(name, bmc->id.device_id);
++ if (!bmc->dev) {
++ mutex_unlock(&ipmidriver_mutex);
++ printk(KERN_ERR
++ "ipmi_msghandler:"
++ " Unable to allocate platform device\n");
++ return -ENOMEM;
++ }
++ bmc->dev->dev.driver = &ipmidriver;
++ dev_set_drvdata(&bmc->dev->dev, bmc);
++ kref_init(&bmc->refcount);
++
++ rv = platform_device_add(bmc->dev);
++ mutex_unlock(&ipmidriver_mutex);
++ if (rv) {
++ platform_device_put(bmc->dev);
++ bmc->dev = NULL;
++ printk(KERN_ERR
++ "ipmi_msghandler:"
++ " Unable to register bmc device: %d\n",
++ rv);
++ /* Don't go to out_err, you can only do that if
++ the device is registered already. */
++ return rv;
++ }
++
++ rv = create_files(bmc);
++ if (rv) {
++ mutex_lock(&ipmidriver_mutex);
++ platform_device_unregister(bmc->dev);
++ mutex_unlock(&ipmidriver_mutex);
++
++ return rv;
++ }
++
++ printk(KERN_INFO
++ "ipmi: Found new BMC (man_id: 0x%6.6x, "
++ " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n",
++ bmc->id.manufacturer_id,
++ bmc->id.product_id,
++ bmc->id.device_id);
++ }
++
++ /*
++ * create symlink from system interface device to bmc device
++ * and back.
++ */
++ intf->sysfs_name = kstrdup(sysfs_name, GFP_KERNEL);
++ if (!intf->sysfs_name) {
++ rv = -ENOMEM;
++ printk(KERN_ERR
++ "ipmi_msghandler: allocate link to BMC: %d\n",
++ rv);
++ goto out_err;
++ }
++
++ rv = sysfs_create_link(&intf->si_dev->kobj,
++ &bmc->dev->dev.kobj, intf->sysfs_name);
++ if (rv) {
++ kfree(intf->sysfs_name);
++ intf->sysfs_name = NULL;
++ printk(KERN_ERR
++ "ipmi_msghandler: Unable to create bmc symlink: %d\n",
++ rv);
++ goto out_err;
++ }
++
++ size = snprintf(dummy, 0, "ipmi%d", ifnum);
++ intf->my_dev_name = kmalloc(size+1, GFP_KERNEL);
++ if (!intf->my_dev_name) {
++ kfree(intf->sysfs_name);
++ intf->sysfs_name = NULL;
++ rv = -ENOMEM;
++ printk(KERN_ERR
++ "ipmi_msghandler: allocate link from BMC: %d\n",
++ rv);
++ goto out_err;
++ }
++ snprintf(intf->my_dev_name, size+1, "ipmi%d", ifnum);
++
++ rv = sysfs_create_link(&bmc->dev->dev.kobj, &intf->si_dev->kobj,
++ intf->my_dev_name);
++ if (rv) {
++ kfree(intf->sysfs_name);
++ intf->sysfs_name = NULL;
++ kfree(intf->my_dev_name);
++ intf->my_dev_name = NULL;
++ printk(KERN_ERR
++ "ipmi_msghandler:"
++ " Unable to create symlink to bmc: %d\n",
++ rv);
++ goto out_err;
++ }
++
++ return 0;
++
++out_err:
++ ipmi_bmc_unregister(intf);
++ return rv;
++}
++
++static int
++send_guid_cmd(ipmi_smi_t intf, int chan)
++{
++ struct kernel_ipmi_msg msg;
++ struct ipmi_system_interface_addr si;
++
++ si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
++ si.channel = IPMI_BMC_CHANNEL;
++ si.lun = 0;
++
++ msg.netfn = IPMI_NETFN_APP_REQUEST;
++ msg.cmd = IPMI_GET_DEVICE_GUID_CMD;
++ msg.data = NULL;
++ msg.data_len = 0;
++ return i_ipmi_request(NULL,
++ intf,
++ (struct ipmi_addr *) &si,
++ 0,
++ &msg,
++ intf,
++ NULL,
++ NULL,
++ 0,
++ intf->channels[0].address,
++ intf->channels[0].lun,
++ -1, 0);
++}
++
++static void
++guid_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
++{
++ if ((msg->addr.addr_type != IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
++ || (msg->msg.netfn != IPMI_NETFN_APP_RESPONSE)
++ || (msg->msg.cmd != IPMI_GET_DEVICE_GUID_CMD))
++ /* Not for me */
++ return;
++
++ if (msg->msg.data[0] != 0) {
++ /* Error from getting the GUID, the BMC doesn't have one. */
++ intf->bmc->guid_set = 0;
++ goto out;
++ }
++
++ if (msg->msg.data_len < 17) {
++ intf->bmc->guid_set = 0;
++ printk(KERN_WARNING PFX
++ "guid_handler: The GUID response from the BMC was too"
++ " short, it was %d but should have been 17. Assuming"
++ " GUID is not available.\n",
++ msg->msg.data_len);
++ goto out;
++ }
++
++ memcpy(intf->bmc->guid, msg->msg.data, 16);
++ intf->bmc->guid_set = 1;
++ out:
++ wake_up(&intf->waitq);
++}
++
++static void
++get_guid(ipmi_smi_t intf)
++{
++ int rv;
++
++ intf->bmc->guid_set = 0x2;
++ intf->null_user_handler = guid_handler;
++ rv = send_guid_cmd(intf, 0);
++ if (rv)
++ /* Send failed, no GUID available. */
++ intf->bmc->guid_set = 0;
++ wait_event(intf->waitq, intf->bmc->guid_set != 2);
++ intf->null_user_handler = NULL;
++}
++
++static int
++send_channel_info_cmd(ipmi_smi_t intf, int chan)
++{
++ struct kernel_ipmi_msg msg;
++ unsigned char data[1];
++ struct ipmi_system_interface_addr si;
++
++ si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
++ si.channel = IPMI_BMC_CHANNEL;
++ si.lun = 0;
++
++ msg.netfn = IPMI_NETFN_APP_REQUEST;
++ msg.cmd = IPMI_GET_CHANNEL_INFO_CMD;
++ msg.data = data;
++ msg.data_len = 1;
++ data[0] = chan;
++ return i_ipmi_request(NULL,
++ intf,
++ (struct ipmi_addr *) &si,
++ 0,
++ &msg,
++ intf,
++ NULL,
++ NULL,
++ 0,
++ intf->channels[0].address,
++ intf->channels[0].lun,
++ -1, 0);
++}
++
++static void
++channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
++{
++ int rv = 0;
++ int chan;
++
++ if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
++ && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE)
++ && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD))
++ {
++ /* It's the one we want */
++ if (msg->msg.data[0] != 0) {
++ /* Got an error from the channel, just go on. */
++
++ if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) {
++ /* If the MC does not support this
++ command, that is legal. We just
++ assume it has one IPMB at channel
++ zero. */
++ intf->channels[0].medium
++ = IPMI_CHANNEL_MEDIUM_IPMB;
++ intf->channels[0].protocol
++ = IPMI_CHANNEL_PROTOCOL_IPMB;
++ rv = -ENOSYS;
++
++ intf->curr_channel = IPMI_MAX_CHANNELS;
++ wake_up(&intf->waitq);
++ goto out;
++ }
++ goto next_channel;
++ }
++ if (msg->msg.data_len < 4) {
++ /* Message not big enough, just go on. */
++ goto next_channel;
++ }
++ chan = intf->curr_channel;
++ intf->channels[chan].medium = msg->msg.data[2] & 0x7f;
++ intf->channels[chan].protocol = msg->msg.data[3] & 0x1f;
++
++ next_channel:
++ intf->curr_channel++;
++ if (intf->curr_channel >= IPMI_MAX_CHANNELS)
++ wake_up(&intf->waitq);
++ else
++ rv = send_channel_info_cmd(intf, intf->curr_channel);
++
++ if (rv) {
++ /* Got an error somehow, just give up. */
++ intf->curr_channel = IPMI_MAX_CHANNELS;
++ wake_up(&intf->waitq);
++
++ printk(KERN_WARNING PFX
++ "Error sending channel information: %d\n",
++ rv);
++ }
++ }
++ out:
++ return;
++}
++
++int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
++ void *send_info,
++ struct ipmi_device_id *device_id,
++ struct device *si_dev,
++ const char *sysfs_name,
++ unsigned char slave_addr)
++{
++ int i, j;
++ int rv;
++ ipmi_smi_t intf;
++ ipmi_smi_t tintf;
++ struct list_head *link;
++
++ /* Make sure the driver is actually initialized, this handles
++ problems with initialization order. */
++ if (!initialized) {
++ rv = ipmi_init_msghandler();
++ if (rv)
++ return rv;
++ /* The init code doesn't return an error if it was turned
++ off, but it won't initialize. Check that. */
++ if (!initialized)
++ return -ENODEV;
++ }
++
++ intf = kmalloc(sizeof(*intf), GFP_KERNEL);
++ if (!intf)
++ return -ENOMEM;
++ memset(intf, 0, sizeof(*intf));
++
++ intf->ipmi_version_major = ipmi_version_major(device_id);
++ intf->ipmi_version_minor = ipmi_version_minor(device_id);
++
++ intf->bmc = kzalloc(sizeof(*intf->bmc), GFP_KERNEL);
++ if (!intf->bmc) {
++ kfree(intf);
++ return -ENOMEM;
++ }
++ intf->intf_num = -1; /* Mark it invalid for now. */
++ kref_init(&intf->refcount);
++ intf->bmc->id = *device_id;
++ intf->si_dev = si_dev;
++ for (j = 0; j < IPMI_MAX_CHANNELS; j++) {
++ intf->channels[j].address = IPMI_BMC_SLAVE_ADDR;
++ intf->channels[j].lun = 2;
++ }
++ if (slave_addr != 0)
++ intf->channels[0].address = slave_addr;
++ INIT_LIST_HEAD(&intf->users);
++ intf->handlers = handlers;
++ intf->send_info = send_info;
++ spin_lock_init(&intf->seq_lock);
++ for (j = 0; j < IPMI_IPMB_NUM_SEQ; j++) {
++ intf->seq_table[j].inuse = 0;
++ intf->seq_table[j].seqid = 0;
++ }
++ intf->curr_seq = 0;
++#ifdef CONFIG_PROC_FS
++ spin_lock_init(&intf->proc_entry_lock);
++#endif
++ spin_lock_init(&intf->waiting_msgs_lock);
++ INIT_LIST_HEAD(&intf->waiting_msgs);
++ spin_lock_init(&intf->events_lock);
++ INIT_LIST_HEAD(&intf->waiting_events);
++ intf->waiting_events_count = 0;
++ mutex_init(&intf->cmd_rcvrs_mutex);
++ spin_lock_init(&intf->maintenance_mode_lock);
++ INIT_LIST_HEAD(&intf->cmd_rcvrs);
++ init_waitqueue_head(&intf->waitq);
++
++ spin_lock_init(&intf->counter_lock);
++ intf->proc_dir = NULL;
++
++ mutex_lock(&smi_watchers_mutex);
++ mutex_lock(&ipmi_interfaces_mutex);
++ /* Look for a hole in the numbers. */
++ i = 0;
++ link = &ipmi_interfaces;
++ list_for_each_entry_rcu(tintf, &ipmi_interfaces, link) {
++ if (tintf->intf_num != i) {
++ link = &tintf->link;
++ break;
++ }
++ i++;
++ }
++ /* Add the new interface in numeric order. */
++ if (i == 0)
++ list_add_rcu(&intf->link, &ipmi_interfaces);
++ else
++ list_add_tail_rcu(&intf->link, link);
++
++ rv = handlers->start_processing(send_info, intf);
++ if (rv)
++ goto out;
++
++ get_guid(intf);
++
++ if ((intf->ipmi_version_major > 1)
++ || ((intf->ipmi_version_major == 1)
++ && (intf->ipmi_version_minor >= 5)))
++ {
++ /* Start scanning the channels to see what is
++ available. */
++ intf->null_user_handler = channel_handler;
++ intf->curr_channel = 0;
++ rv = send_channel_info_cmd(intf, 0);
++ if (rv)
++ goto out;
++
++ /* Wait for the channel info to be read. */
++ wait_event(intf->waitq,
++ intf->curr_channel >= IPMI_MAX_CHANNELS);
++ intf->null_user_handler = NULL;
++ } else {
++ /* Assume a single IPMB channel at zero. */
++ intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB;
++ intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB;
++ }
++
++ if (rv == 0)
++ rv = add_proc_entries(intf, i);
++
++ rv = ipmi_bmc_register(intf, i, sysfs_name);
++
++ out:
++ if (rv) {
++ if (intf->proc_dir)
++ remove_proc_entries(intf);
++ intf->handlers = NULL;
++ list_del_rcu(&intf->link);
++ mutex_unlock(&ipmi_interfaces_mutex);
++ mutex_unlock(&smi_watchers_mutex);
++ synchronize_rcu();
++ kref_put(&intf->refcount, intf_free);
++ } else {
++ /* After this point the interface is legal to use. */
++ intf->intf_num = i;
++ mutex_unlock(&ipmi_interfaces_mutex);
++ call_smi_watchers(i, intf->si_dev);
++ mutex_unlock(&smi_watchers_mutex);
++ }
++
++ return rv;
++}
++
++static void cleanup_smi_msgs(ipmi_smi_t intf)
++{
++ int i;
++ struct seq_table *ent;
++
++ /* No need for locks, the interface is down. */
++ for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) {
++ ent = &(intf->seq_table[i]);
++ if (!ent->inuse)
++ continue;
++ deliver_err_response(ent->recv_msg, IPMI_ERR_UNSPECIFIED);
++ }
++}
++
++int ipmi_unregister_smi(ipmi_smi_t intf)
++{
++ struct ipmi_smi_watcher *w;
++ int intf_num = intf->intf_num;
++
++ ipmi_bmc_unregister(intf);
++
++ mutex_lock(&smi_watchers_mutex);
++ mutex_lock(&ipmi_interfaces_mutex);
++ intf->intf_num = -1;
++ intf->handlers = NULL;
++ list_del_rcu(&intf->link);
++ mutex_unlock(&ipmi_interfaces_mutex);
++ synchronize_rcu();
++
++ cleanup_smi_msgs(intf);
++
++ remove_proc_entries(intf);
++
++ /* Call all the watcher interfaces to tell them that
++ an interface is gone. */
++ list_for_each_entry(w, &smi_watchers, link)
++ w->smi_gone(intf_num);
++ mutex_unlock(&smi_watchers_mutex);
++
++ kref_put(&intf->refcount, intf_free);
++ return 0;
++}
++
++static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ struct ipmi_ipmb_addr ipmb_addr;
++ struct ipmi_recv_msg *recv_msg;
++ unsigned long flags;
++
++
++ /* This is 11, not 10, because the response must contain a
++ * completion code. */
++ if (msg->rsp_size < 11) {
++ /* Message not big enough, just ignore it. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->invalid_ipmb_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ if (msg->rsp[2] != 0) {
++ /* An error getting the response, just ignore it. */
++ return 0;
++ }
++
++ ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE;
++ ipmb_addr.slave_addr = msg->rsp[6];
++ ipmb_addr.channel = msg->rsp[3] & 0x0f;
++ ipmb_addr.lun = msg->rsp[7] & 3;
++
++ /* It's a response from a remote entity. Look up the sequence
++ number and handle the response. */
++ if (intf_find_seq(intf,
++ msg->rsp[7] >> 2,
++ msg->rsp[3] & 0x0f,
++ msg->rsp[8],
++ (msg->rsp[4] >> 2) & (~1),
++ (struct ipmi_addr *) &(ipmb_addr),
++ &recv_msg))
++ {
++ /* We were unable to find the sequence number,
++ so just nuke the message. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->unhandled_ipmb_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ memcpy(recv_msg->msg_data,
++ &(msg->rsp[9]),
++ msg->rsp_size - 9);
++ /* THe other fields matched, so no need to set them, except
++ for netfn, which needs to be the response that was
++ returned, not the request value. */
++ recv_msg->msg.netfn = msg->rsp[4] >> 2;
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = msg->rsp_size - 10;
++ recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->handled_ipmb_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ deliver_response(recv_msg);
++
++ return 0;
++}
++
++static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ struct cmd_rcvr *rcvr;
++ int rv = 0;
++ unsigned char netfn;
++ unsigned char cmd;
++ unsigned char chan;
++ ipmi_user_t user = NULL;
++ struct ipmi_ipmb_addr *ipmb_addr;
++ struct ipmi_recv_msg *recv_msg;
++ unsigned long flags;
++ struct ipmi_smi_handlers *handlers;
++
++ if (msg->rsp_size < 10) {
++ /* Message not big enough, just ignore it. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ if (msg->rsp[2] != 0) {
++ /* An error getting the response, just ignore it. */
++ return 0;
++ }
++
++ netfn = msg->rsp[4] >> 2;
++ cmd = msg->rsp[8];
++ chan = msg->rsp[3] & 0xf;
++
++ rcu_read_lock();
++ rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
++ if (rcvr) {
++ user = rcvr->user;
++ kref_get(&user->refcount);
++ } else
++ user = NULL;
++ rcu_read_unlock();
++
++ if (user == NULL) {
++ /* We didn't find a user, deliver an error response. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->unhandled_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++
++ msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
++ msg->data[1] = IPMI_SEND_MSG_CMD;
++ msg->data[2] = msg->rsp[3];
++ msg->data[3] = msg->rsp[6];
++ msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3);
++ msg->data[5] = ipmb_checksum(&(msg->data[3]), 2);
++ msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address;
++ /* rqseq/lun */
++ msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3);
++ msg->data[8] = msg->rsp[8]; /* cmd */
++ msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE;
++ msg->data[10] = ipmb_checksum(&(msg->data[6]), 4);
++ msg->data_size = 11;
++
++#ifdef DEBUG_MSGING
++ {
++ int m;
++ printk("Invalid command:");
++ for (m = 0; m < msg->data_size; m++)
++ printk(" %2.2x", msg->data[m]);
++ printk("\n");
++ }
++#endif
++ rcu_read_lock();
++ handlers = intf->handlers;
++ if (handlers) {
++ handlers->sender(intf->send_info, msg, 0);
++ /* We used the message, so return the value
++ that causes it to not be freed or
++ queued. */
++ rv = -1;
++ }
++ rcu_read_unlock();
++ } else {
++ /* Deliver the message to the user. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->handled_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++
++ recv_msg = ipmi_alloc_recv_msg();
++ if (!recv_msg) {
++ /* We couldn't allocate memory for the
++ message, so requeue it for handling
++ later. */
++ rv = 1;
++ kref_put(&user->refcount, free_user);
++ } else {
++ /* Extract the source address from the data. */
++ ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr;
++ ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE;
++ ipmb_addr->slave_addr = msg->rsp[6];
++ ipmb_addr->lun = msg->rsp[7] & 3;
++ ipmb_addr->channel = msg->rsp[3] & 0xf;
++
++ /* Extract the rest of the message information
++ from the IPMB header.*/
++ recv_msg->user = user;
++ recv_msg->recv_type = IPMI_CMD_RECV_TYPE;
++ recv_msg->msgid = msg->rsp[7] >> 2;
++ recv_msg->msg.netfn = msg->rsp[4] >> 2;
++ recv_msg->msg.cmd = msg->rsp[8];
++ recv_msg->msg.data = recv_msg->msg_data;
++
++ /* We chop off 10, not 9 bytes because the checksum
++ at the end also needs to be removed. */
++ recv_msg->msg.data_len = msg->rsp_size - 10;
++ memcpy(recv_msg->msg_data,
++ &(msg->rsp[9]),
++ msg->rsp_size - 10);
++ deliver_response(recv_msg);
++ }
++ }
++
++ return rv;
++}
++
++static int handle_lan_get_msg_rsp(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ struct ipmi_lan_addr lan_addr;
++ struct ipmi_recv_msg *recv_msg;
++ unsigned long flags;
++
++
++ /* This is 13, not 12, because the response must contain a
++ * completion code. */
++ if (msg->rsp_size < 13) {
++ /* Message not big enough, just ignore it. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->invalid_lan_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ if (msg->rsp[2] != 0) {
++ /* An error getting the response, just ignore it. */
++ return 0;
++ }
++
++ lan_addr.addr_type = IPMI_LAN_ADDR_TYPE;
++ lan_addr.session_handle = msg->rsp[4];
++ lan_addr.remote_SWID = msg->rsp[8];
++ lan_addr.local_SWID = msg->rsp[5];
++ lan_addr.channel = msg->rsp[3] & 0x0f;
++ lan_addr.privilege = msg->rsp[3] >> 4;
++ lan_addr.lun = msg->rsp[9] & 3;
++
++ /* It's a response from a remote entity. Look up the sequence
++ number and handle the response. */
++ if (intf_find_seq(intf,
++ msg->rsp[9] >> 2,
++ msg->rsp[3] & 0x0f,
++ msg->rsp[10],
++ (msg->rsp[6] >> 2) & (~1),
++ (struct ipmi_addr *) &(lan_addr),
++ &recv_msg))
++ {
++ /* We were unable to find the sequence number,
++ so just nuke the message. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->unhandled_lan_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ memcpy(recv_msg->msg_data,
++ &(msg->rsp[11]),
++ msg->rsp_size - 11);
++ /* The other fields matched, so no need to set them, except
++ for netfn, which needs to be the response that was
++ returned, not the request value. */
++ recv_msg->msg.netfn = msg->rsp[6] >> 2;
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = msg->rsp_size - 12;
++ recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->handled_lan_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ deliver_response(recv_msg);
++
++ return 0;
++}
++
++static int handle_lan_get_msg_cmd(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ struct cmd_rcvr *rcvr;
++ int rv = 0;
++ unsigned char netfn;
++ unsigned char cmd;
++ unsigned char chan;
++ ipmi_user_t user = NULL;
++ struct ipmi_lan_addr *lan_addr;
++ struct ipmi_recv_msg *recv_msg;
++ unsigned long flags;
++
++ if (msg->rsp_size < 12) {
++ /* Message not big enough, just ignore it. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->invalid_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ if (msg->rsp[2] != 0) {
++ /* An error getting the response, just ignore it. */
++ return 0;
++ }
++
++ netfn = msg->rsp[6] >> 2;
++ cmd = msg->rsp[10];
++ chan = msg->rsp[3] & 0xf;
++
++ rcu_read_lock();
++ rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
++ if (rcvr) {
++ user = rcvr->user;
++ kref_get(&user->refcount);
++ } else
++ user = NULL;
++ rcu_read_unlock();
++
++ if (user == NULL) {
++ /* We didn't find a user, just give up. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->unhandled_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++
++ rv = 0; /* Don't do anything with these messages, just
++ allow them to be freed. */
++ } else {
++ /* Deliver the message to the user. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->handled_commands++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++
++ recv_msg = ipmi_alloc_recv_msg();
++ if (!recv_msg) {
++ /* We couldn't allocate memory for the
++ message, so requeue it for handling
++ later. */
++ rv = 1;
++ kref_put(&user->refcount, free_user);
++ } else {
++ /* Extract the source address from the data. */
++ lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr;
++ lan_addr->addr_type = IPMI_LAN_ADDR_TYPE;
++ lan_addr->session_handle = msg->rsp[4];
++ lan_addr->remote_SWID = msg->rsp[8];
++ lan_addr->local_SWID = msg->rsp[5];
++ lan_addr->lun = msg->rsp[9] & 3;
++ lan_addr->channel = msg->rsp[3] & 0xf;
++ lan_addr->privilege = msg->rsp[3] >> 4;
++
++ /* Extract the rest of the message information
++ from the IPMB header.*/
++ recv_msg->user = user;
++ recv_msg->recv_type = IPMI_CMD_RECV_TYPE;
++ recv_msg->msgid = msg->rsp[9] >> 2;
++ recv_msg->msg.netfn = msg->rsp[6] >> 2;
++ recv_msg->msg.cmd = msg->rsp[10];
++ recv_msg->msg.data = recv_msg->msg_data;
++
++ /* We chop off 12, not 11 bytes because the checksum
++ at the end also needs to be removed. */
++ recv_msg->msg.data_len = msg->rsp_size - 12;
++ memcpy(recv_msg->msg_data,
++ &(msg->rsp[11]),
++ msg->rsp_size - 12);
++ deliver_response(recv_msg);
++ }
++ }
++
++ return rv;
++}
++
++static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
++ struct ipmi_smi_msg *msg)
++{
++ struct ipmi_system_interface_addr *smi_addr;
++
++ recv_msg->msgid = 0;
++ smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr);
++ smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
++ smi_addr->channel = IPMI_BMC_CHANNEL;
++ smi_addr->lun = msg->rsp[0] & 3;
++ recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE;
++ recv_msg->msg.netfn = msg->rsp[0] >> 2;
++ recv_msg->msg.cmd = msg->rsp[1];
++ memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3);
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = msg->rsp_size - 3;
++}
++
++static int handle_read_event_rsp(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ struct ipmi_recv_msg *recv_msg, *recv_msg2;
++ struct list_head msgs;
++ ipmi_user_t user;
++ int rv = 0;
++ int deliver_count = 0;
++ unsigned long flags;
++
++ if (msg->rsp_size < 19) {
++ /* Message is too small to be an IPMB event. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->invalid_events++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ return 0;
++ }
++
++ if (msg->rsp[2] != 0) {
++ /* An error getting the event, just ignore it. */
++ return 0;
++ }
++
++ INIT_LIST_HEAD(&msgs);
++
++ spin_lock_irqsave(&intf->events_lock, flags);
++
++ spin_lock(&intf->counter_lock);
++ intf->events++;
++ spin_unlock(&intf->counter_lock);
++
++ /* Allocate and fill in one message for every user that is getting
++ events. */
++ rcu_read_lock();
++ list_for_each_entry_rcu(user, &intf->users, link) {
++ if (!user->gets_events)
++ continue;
++
++ recv_msg = ipmi_alloc_recv_msg();
++ if (!recv_msg) {
++ rcu_read_unlock();
++ list_for_each_entry_safe(recv_msg, recv_msg2, &msgs,
++ link) {
++ list_del(&recv_msg->link);
++ ipmi_free_recv_msg(recv_msg);
++ }
++ /* We couldn't allocate memory for the
++ message, so requeue it for handling
++ later. */
++ rv = 1;
++ goto out;
++ }
++
++ deliver_count++;
++
++ copy_event_into_recv_msg(recv_msg, msg);
++ recv_msg->user = user;
++ kref_get(&user->refcount);
++ list_add_tail(&(recv_msg->link), &msgs);
++ }
++ rcu_read_unlock();
++
++ if (deliver_count) {
++ /* Now deliver all the messages. */
++ list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) {
++ list_del(&recv_msg->link);
++ deliver_response(recv_msg);
++ }
++ } else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) {
++ /* No one to receive the message, put it in queue if there's
++ not already too many things in the queue. */
++ recv_msg = ipmi_alloc_recv_msg();
++ if (!recv_msg) {
++ /* We couldn't allocate memory for the
++ message, so requeue it for handling
++ later. */
++ rv = 1;
++ goto out;
++ }
++
++ copy_event_into_recv_msg(recv_msg, msg);
++ list_add_tail(&(recv_msg->link), &(intf->waiting_events));
++ intf->waiting_events_count++;
++ } else {
++ /* There's too many things in the queue, discard this
++ message. */
++ printk(KERN_WARNING PFX "Event queue full, discarding an"
++ " incoming event\n");
++ }
++
++ out:
++ spin_unlock_irqrestore(&(intf->events_lock), flags);
++
++ return rv;
++}
++
++static int handle_bmc_rsp(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ struct ipmi_recv_msg *recv_msg;
++ unsigned long flags;
++ struct ipmi_user *user;
++
++ recv_msg = (struct ipmi_recv_msg *) msg->user_data;
++ if (recv_msg == NULL)
++ {
++ printk(KERN_WARNING"IPMI message received with no owner. This\n"
++ "could be because of a malformed message, or\n"
++ "because of a hardware error. Contact your\n"
++ "hardware vender for assistance\n");
++ return 0;
++ }
++
++ user = recv_msg->user;
++ /* Make sure the user still exists. */
++ if (user && !user->valid) {
++ /* The user for the message went away, so give up. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->unhandled_local_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ ipmi_free_recv_msg(recv_msg);
++ } else {
++ struct ipmi_system_interface_addr *smi_addr;
++
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ intf->handled_local_responses++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE;
++ recv_msg->msgid = msg->msgid;
++ smi_addr = ((struct ipmi_system_interface_addr *)
++ &(recv_msg->addr));
++ smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
++ smi_addr->channel = IPMI_BMC_CHANNEL;
++ smi_addr->lun = msg->rsp[0] & 3;
++ recv_msg->msg.netfn = msg->rsp[0] >> 2;
++ recv_msg->msg.cmd = msg->rsp[1];
++ memcpy(recv_msg->msg_data,
++ &(msg->rsp[2]),
++ msg->rsp_size - 2);
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = msg->rsp_size - 2;
++ deliver_response(recv_msg);
++ }
++
++ return 0;
++}
++
++/* Handle a new message. Return 1 if the message should be requeued,
++ 0 if the message should be freed, or -1 if the message should not
++ be freed or requeued. */
++static int handle_new_recv_msg(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ int requeue;
++ int chan;
++
++#ifdef DEBUG_MSGING
++ int m;
++ printk("Recv:");
++ for (m = 0; m < msg->rsp_size; m++)
++ printk(" %2.2x", msg->rsp[m]);
++ printk("\n");
++#endif
++ if (msg->rsp_size < 2) {
++ /* Message is too small to be correct. */
++ printk(KERN_WARNING PFX "BMC returned to small a message"
++ " for netfn %x cmd %x, got %d bytes\n",
++ (msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size);
++
++ /* Generate an error response for the message. */
++ msg->rsp[0] = msg->data[0] | (1 << 2);
++ msg->rsp[1] = msg->data[1];
++ msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
++ msg->rsp_size = 3;
++ } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */
++ || (msg->rsp[1] != msg->data[1])) /* Command */
++ {
++ /* The response is not even marginally correct. */
++ printk(KERN_WARNING PFX "BMC returned incorrect response,"
++ " expected netfn %x cmd %x, got netfn %x cmd %x\n",
++ (msg->data[0] >> 2) | 1, msg->data[1],
++ msg->rsp[0] >> 2, msg->rsp[1]);
++
++ /* Generate an error response for the message. */
++ msg->rsp[0] = msg->data[0] | (1 << 2);
++ msg->rsp[1] = msg->data[1];
++ msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
++ msg->rsp_size = 3;
++ }
++
++ if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
++ && (msg->rsp[1] == IPMI_SEND_MSG_CMD)
++ && (msg->user_data != NULL))
++ {
++ /* It's a response to a response we sent. For this we
++ deliver a send message response to the user. */
++ struct ipmi_recv_msg *recv_msg = msg->user_data;
++
++ requeue = 0;
++ if (msg->rsp_size < 2)
++ /* Message is too small to be correct. */
++ goto out;
++
++ chan = msg->data[2] & 0x0f;
++ if (chan >= IPMI_MAX_CHANNELS)
++ /* Invalid channel number */
++ goto out;
++
++ if (!recv_msg)
++ goto out;
++
++ /* Make sure the user still exists. */
++ if (!recv_msg->user || !recv_msg->user->valid)
++ goto out;
++
++ recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE;
++ recv_msg->msg.data = recv_msg->msg_data;
++ recv_msg->msg.data_len = 1;
++ recv_msg->msg_data[0] = msg->rsp[2];
++ deliver_response(recv_msg);
++ } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
++ && (msg->rsp[1] == IPMI_GET_MSG_CMD))
++ {
++ /* It's from the receive queue. */
++ chan = msg->rsp[3] & 0xf;
++ if (chan >= IPMI_MAX_CHANNELS) {
++ /* Invalid channel number */
++ requeue = 0;
++ goto out;
++ }
++
++ switch (intf->channels[chan].medium) {
++ case IPMI_CHANNEL_MEDIUM_IPMB:
++ if (msg->rsp[4] & 0x04) {
++ /* It's a response, so find the
++ requesting message and send it up. */
++ requeue = handle_ipmb_get_msg_rsp(intf, msg);
++ } else {
++ /* It's a command to the SMS from some other
++ entity. Handle that. */
++ requeue = handle_ipmb_get_msg_cmd(intf, msg);
++ }
++ break;
++
++ case IPMI_CHANNEL_MEDIUM_8023LAN:
++ case IPMI_CHANNEL_MEDIUM_ASYNC:
++ if (msg->rsp[6] & 0x04) {
++ /* It's a response, so find the
++ requesting message and send it up. */
++ requeue = handle_lan_get_msg_rsp(intf, msg);
++ } else {
++ /* It's a command to the SMS from some other
++ entity. Handle that. */
++ requeue = handle_lan_get_msg_cmd(intf, msg);
++ }
++ break;
++
++ default:
++ /* We don't handle the channel type, so just
++ * free the message. */
++ requeue = 0;
++ }
++
++ } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
++ && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD))
++ {
++ /* It's an asyncronous event. */
++ requeue = handle_read_event_rsp(intf, msg);
++ } else {
++ /* It's a response from the local BMC. */
++ requeue = handle_bmc_rsp(intf, msg);
++ }
++
++ out:
++ return requeue;
++}
++
++/* Handle a new message from the lower layer. */
++void ipmi_smi_msg_received(ipmi_smi_t intf,
++ struct ipmi_smi_msg *msg)
++{
++ unsigned long flags;
++ int rv;
++
++
++ if ((msg->data_size >= 2)
++ && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2))
++ && (msg->data[1] == IPMI_SEND_MSG_CMD)
++ && (msg->user_data == NULL))
++ {
++ /* This is the local response to a command send, start
++ the timer for these. The user_data will not be
++ NULL if this is a response send, and we will let
++ response sends just go through. */
++
++ /* Check for errors, if we get certain errors (ones
++ that mean basically we can try again later), we
++ ignore them and start the timer. Otherwise we
++ report the error immediately. */
++ if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0)
++ && (msg->rsp[2] != IPMI_NODE_BUSY_ERR)
++ && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)
++ && (msg->rsp[2] != IPMI_BUS_ERR)
++ && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR))
++ {
++ int chan = msg->rsp[3] & 0xf;
++
++ /* Got an error sending the message, handle it. */
++ spin_lock_irqsave(&intf->counter_lock, flags);
++ if (chan >= IPMI_MAX_CHANNELS)
++ ; /* This shouldn't happen */
++ else if ((intf->channels[chan].medium
++ == IPMI_CHANNEL_MEDIUM_8023LAN)
++ || (intf->channels[chan].medium
++ == IPMI_CHANNEL_MEDIUM_ASYNC))
++ intf->sent_lan_command_errs++;
++ else
++ intf->sent_ipmb_command_errs++;
++ spin_unlock_irqrestore(&intf->counter_lock, flags);
++ intf_err_seq(intf, msg->msgid, msg->rsp[2]);
++ } else {
++ /* The message was sent, start the timer. */
++ intf_start_seq_timer(intf, msg->msgid);
++ }
++
++ ipmi_free_smi_msg(msg);
++ goto out;
++ }
++
++ /* To preserve message order, if the list is not empty, we
++ tack this message onto the end of the list. */
++ spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
++ if (!list_empty(&intf->waiting_msgs)) {
++ list_add_tail(&msg->link, &intf->waiting_msgs);
++ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
++ goto out;
++ }
++ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
++
++ rv = handle_new_recv_msg(intf, msg);
++ if (rv > 0) {
++ /* Could not handle the message now, just add it to a
++ list to handle later. */
++ spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
++ list_add_tail(&msg->link, &intf->waiting_msgs);
++ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
++ } else if (rv == 0) {
++ ipmi_free_smi_msg(msg);
++ }
++
++ out:
++ return;
++}
++
++void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf)
++{
++ ipmi_user_t user;
++
++ rcu_read_lock();
++ list_for_each_entry_rcu(user, &intf->users, link) {
++ if (!user->handler->ipmi_watchdog_pretimeout)
++ continue;
++
++ user->handler->ipmi_watchdog_pretimeout(user->handler_data);
++ }
++ rcu_read_unlock();
++}
++
++
++static struct ipmi_smi_msg *
++smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
++ unsigned char seq, long seqid)
++{
++ struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg();
++ if (!smi_msg)
++ /* If we can't allocate the message, then just return, we
++ get 4 retries, so this should be ok. */
++ return NULL;
++
++ memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len);
++ smi_msg->data_size = recv_msg->msg.data_len;
++ smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid);
++
++#ifdef DEBUG_MSGING
++ {
++ int m;
++ printk("Resend: ");
++ for (m = 0; m < smi_msg->data_size; m++)
++ printk(" %2.2x", smi_msg->data[m]);
++ printk("\n");
++ }
++#endif
++ return smi_msg;
++}
++
++static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
++ struct list_head *timeouts, long timeout_period,
++ int slot, unsigned long *flags)
++{
++ struct ipmi_recv_msg *msg;
++ struct ipmi_smi_handlers *handlers;
++
++ if (intf->intf_num == -1)
++ return;
++
++ if (!ent->inuse)
++ return;
++
++ ent->timeout -= timeout_period;
++ if (ent->timeout > 0)
++ return;
++
++ if (ent->retries_left == 0) {
++ /* The message has used all its retries. */
++ ent->inuse = 0;
++ msg = ent->recv_msg;
++ list_add_tail(&msg->link, timeouts);
++ spin_lock(&intf->counter_lock);
++ if (ent->broadcast)
++ intf->timed_out_ipmb_broadcasts++;
++ else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
++ intf->timed_out_lan_commands++;
++ else
++ intf->timed_out_ipmb_commands++;
++ spin_unlock(&intf->counter_lock);
++ } else {
++ struct ipmi_smi_msg *smi_msg;
++ /* More retries, send again. */
++
++ /* Start with the max timer, set to normal
++ timer after the message is sent. */
++ ent->timeout = MAX_MSG_TIMEOUT;
++ ent->retries_left--;
++ spin_lock(&intf->counter_lock);
++ if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
++ intf->retransmitted_lan_commands++;
++ else
++ intf->retransmitted_ipmb_commands++;
++ spin_unlock(&intf->counter_lock);
++
++ smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
++ ent->seqid);
++ if (!smi_msg)
++ return;
++
++ spin_unlock_irqrestore(&intf->seq_lock, *flags);
++
++ /* Send the new message. We send with a zero
++ * priority. It timed out, I doubt time is
++ * that critical now, and high priority
++ * messages are really only for messages to the
++ * local MC, which don't get resent. */
++ handlers = intf->handlers;
++ if (handlers)
++ intf->handlers->sender(intf->send_info,
++ smi_msg, 0);
++ else
++ ipmi_free_smi_msg(smi_msg);
++
++ spin_lock_irqsave(&intf->seq_lock, *flags);
++ }
++}
++
++static void ipmi_timeout_handler(long timeout_period)
++{
++ ipmi_smi_t intf;
++ struct list_head timeouts;
++ struct ipmi_recv_msg *msg, *msg2;
++ struct ipmi_smi_msg *smi_msg, *smi_msg2;
++ unsigned long flags;
++ int i;
++
++ rcu_read_lock();
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ /* See if any waiting messages need to be processed. */
++ spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
++ list_for_each_entry_safe(smi_msg, smi_msg2,
++ &intf->waiting_msgs, link) {
++ if (!handle_new_recv_msg(intf, smi_msg)) {
++ list_del(&smi_msg->link);
++ ipmi_free_smi_msg(smi_msg);
++ } else {
++ /* To preserve message order, quit if we
++ can't handle a message. */
++ break;
++ }
++ }
++ spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags);
++
++ /* Go through the seq table and find any messages that
++ have timed out, putting them in the timeouts
++ list. */
++ INIT_LIST_HEAD(&timeouts);
++ spin_lock_irqsave(&intf->seq_lock, flags);
++ for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
++ check_msg_timeout(intf, &(intf->seq_table[i]),
++ &timeouts, timeout_period, i,
++ &flags);
++ spin_unlock_irqrestore(&intf->seq_lock, flags);
++
++ list_for_each_entry_safe(msg, msg2, &timeouts, link)
++ deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
++
++ /*
++ * Maintenance mode handling. Check the timeout
++ * optimistically before we claim the lock. It may
++ * mean a timeout gets missed occasionally, but that
++ * only means the timeout gets extended by one period
++ * in that case. No big deal, and it avoids the lock
++ * most of the time.
++ */
++ if (intf->auto_maintenance_timeout > 0) {
++ spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
++ if (intf->auto_maintenance_timeout > 0) {
++ intf->auto_maintenance_timeout
++ -= timeout_period;
++ if (!intf->maintenance_mode
++ && (intf->auto_maintenance_timeout <= 0))
++ {
++ intf->maintenance_mode_enable = 0;
++ maintenance_mode_update(intf);
++ }
++ }
++ spin_unlock_irqrestore(&intf->maintenance_mode_lock,
++ flags);
++ }
++ }
++ rcu_read_unlock();
++}
++
++static void ipmi_request_event(void)
++{
++ ipmi_smi_t intf;
++ struct ipmi_smi_handlers *handlers;
++
++ rcu_read_lock();
++ /* Called from the timer, no need to check if handlers is
++ * valid. */
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ /* No event requests when in maintenance mode. */
++ if (intf->maintenance_mode_enable)
++ continue;
++
++ handlers = intf->handlers;
++ if (handlers)
++ handlers->request_events(intf->send_info);
++ }
++ rcu_read_unlock();
++}
++
++static struct timer_list ipmi_timer;
++
++/* Call every ~100 ms. */
++#define IPMI_TIMEOUT_TIME 100
++
++/* How many jiffies does it take to get to the timeout time. */
++#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000)
++
++/* Request events from the queue every second (this is the number of
++ IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the
++ future, IPMI will add a way to know immediately if an event is in
++ the queue and this silliness can go away. */
++#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME))
++
++static atomic_t stop_operation;
++static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
++
++static void ipmi_timeout(unsigned long data)
++{
++ if (atomic_read(&stop_operation))
++ return;
++
++ ticks_to_req_ev--;
++ if (ticks_to_req_ev == 0) {
++ ipmi_request_event();
++ ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
++ }
++
++ ipmi_timeout_handler(IPMI_TIMEOUT_TIME);
++
++ mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
++}
++
++
++static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0);
++static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0);
++
++/* FIXME - convert these to slabs. */
++static void free_smi_msg(struct ipmi_smi_msg *msg)
++{
++ atomic_dec(&smi_msg_inuse_count);
++ kfree(msg);
++}
++
++struct ipmi_smi_msg *ipmi_alloc_smi_msg(void)
++{
++ struct ipmi_smi_msg *rv;
++ rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC);
++ if (rv) {
++ rv->done = free_smi_msg;
++ rv->user_data = NULL;
++ atomic_inc(&smi_msg_inuse_count);
++ }
++ return rv;
++}
++
++static void free_recv_msg(struct ipmi_recv_msg *msg)
++{
++ atomic_dec(&recv_msg_inuse_count);
++ kfree(msg);
++}
++
++struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
++{
++ struct ipmi_recv_msg *rv;
++
++ rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC);
++ if (rv) {
++ rv->user = NULL;
++ rv->done = free_recv_msg;
++ atomic_inc(&recv_msg_inuse_count);
++ }
++ return rv;
++}
++
++void ipmi_free_recv_msg(struct ipmi_recv_msg *msg)
++{
++ if (msg->user)
++ kref_put(&msg->user->refcount, free_user);
++ msg->done(msg);
++}
++
++#ifdef CONFIG_IPMI_PANIC_EVENT
++
++static void dummy_smi_done_handler(struct ipmi_smi_msg *msg)
++{
++}
++
++static void dummy_recv_done_handler(struct ipmi_recv_msg *msg)
++{
++}
++
++#ifdef CONFIG_IPMI_PANIC_STRING
++static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
++{
++ if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
++ && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE)
++ && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD)
++ && (msg->msg.data[0] == IPMI_CC_NO_ERROR))
++ {
++ /* A get event receiver command, save it. */
++ intf->event_receiver = msg->msg.data[1];
++ intf->event_receiver_lun = msg->msg.data[2] & 0x3;
++ }
++}
++
++static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
++{
++ if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
++ && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE)
++ && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD)
++ && (msg->msg.data[0] == IPMI_CC_NO_ERROR))
++ {
++ /* A get device id command, save if we are an event
++ receiver or generator. */
++ intf->local_sel_device = (msg->msg.data[6] >> 2) & 1;
++ intf->local_event_generator = (msg->msg.data[6] >> 5) & 1;
++ }
++}
++#endif
++
++static void send_panic_events(char *str)
++{
++ struct kernel_ipmi_msg msg;
++ ipmi_smi_t intf;
++ unsigned char data[16];
++ struct ipmi_system_interface_addr *si;
++ struct ipmi_addr addr;
++ struct ipmi_smi_msg smi_msg;
++ struct ipmi_recv_msg recv_msg;
++
++ si = (struct ipmi_system_interface_addr *) &addr;
++ si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
++ si->channel = IPMI_BMC_CHANNEL;
++ si->lun = 0;
++
++ /* Fill in an event telling that we have failed. */
++ msg.netfn = 0x04; /* Sensor or Event. */
++ msg.cmd = 2; /* Platform event command. */
++ msg.data = data;
++ msg.data_len = 8;
++ data[0] = 0x41; /* Kernel generator ID, IPMI table 5-4 */
++ data[1] = 0x03; /* This is for IPMI 1.0. */
++ data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */
++ data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */
++ data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */
++
++ /* Put a few breadcrumbs in. Hopefully later we can add more things
++ to make the panic events more useful. */
++ if (str) {
++ data[3] = str[0];
++ data[6] = str[1];
++ data[7] = str[2];
++ }
++
++ smi_msg.done = dummy_smi_done_handler;
++ recv_msg.done = dummy_recv_done_handler;
++
++ /* For every registered interface, send the event. */
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ if (!intf->handlers)
++ /* Interface is not ready. */
++ continue;
++
++ /* Send the event announcing the panic. */
++ intf->handlers->set_run_to_completion(intf->send_info, 1);
++ i_ipmi_request(NULL,
++ intf,
++ &addr,
++ 0,
++ &msg,
++ intf,
++ &smi_msg,
++ &recv_msg,
++ 0,
++ intf->channels[0].address,
++ intf->channels[0].lun,
++ 0, 1); /* Don't retry, and don't wait. */
++ }
++
++#ifdef CONFIG_IPMI_PANIC_STRING
++ /* On every interface, dump a bunch of OEM event holding the
++ string. */
++ if (!str)
++ return;
++
++ /* For every registered interface, send the event. */
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ char *p = str;
++ struct ipmi_ipmb_addr *ipmb;
++ int j;
++
++ if (intf->intf_num == -1)
++ /* Interface was not ready yet. */
++ continue;
++
++ /* First job here is to figure out where to send the
++ OEM events. There's no way in IPMI to send OEM
++ events using an event send command, so we have to
++ find the SEL to put them in and stick them in
++ there. */
++
++ /* Get capabilities from the get device id. */
++ intf->local_sel_device = 0;
++ intf->local_event_generator = 0;
++ intf->event_receiver = 0;
++
++ /* Request the device info from the local MC. */
++ msg.netfn = IPMI_NETFN_APP_REQUEST;
++ msg.cmd = IPMI_GET_DEVICE_ID_CMD;
++ msg.data = NULL;
++ msg.data_len = 0;
++ intf->null_user_handler = device_id_fetcher;
++ i_ipmi_request(NULL,
++ intf,
++ &addr,
++ 0,
++ &msg,
++ intf,
++ &smi_msg,
++ &recv_msg,
++ 0,
++ intf->channels[0].address,
++ intf->channels[0].lun,
++ 0, 1); /* Don't retry, and don't wait. */
++
++ if (intf->local_event_generator) {
++ /* Request the event receiver from the local MC. */
++ msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST;
++ msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD;
++ msg.data = NULL;
++ msg.data_len = 0;
++ intf->null_user_handler = event_receiver_fetcher;
++ i_ipmi_request(NULL,
++ intf,
++ &addr,
++ 0,
++ &msg,
++ intf,
++ &smi_msg,
++ &recv_msg,
++ 0,
++ intf->channels[0].address,
++ intf->channels[0].lun,
++ 0, 1); /* no retry, and no wait. */
++ }
++ intf->null_user_handler = NULL;
++
++ /* Validate the event receiver. The low bit must not
++ be 1 (it must be a valid IPMB address), it cannot
++ be zero, and it must not be my address. */
++ if (((intf->event_receiver & 1) == 0)
++ && (intf->event_receiver != 0)
++ && (intf->event_receiver != intf->channels[0].address))
++ {
++ /* The event receiver is valid, send an IPMB
++ message. */
++ ipmb = (struct ipmi_ipmb_addr *) &addr;
++ ipmb->addr_type = IPMI_IPMB_ADDR_TYPE;
++ ipmb->channel = 0; /* FIXME - is this right? */
++ ipmb->lun = intf->event_receiver_lun;
++ ipmb->slave_addr = intf->event_receiver;
++ } else if (intf->local_sel_device) {
++ /* The event receiver was not valid (or was
++ me), but I am an SEL device, just dump it
++ in my SEL. */
++ si = (struct ipmi_system_interface_addr *) &addr;
++ si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
++ si->channel = IPMI_BMC_CHANNEL;
++ si->lun = 0;
++ } else
++ continue; /* No where to send the event. */
++
++
++ msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */
++ msg.cmd = IPMI_ADD_SEL_ENTRY_CMD;
++ msg.data = data;
++ msg.data_len = 16;
++
++ j = 0;
++ while (*p) {
++ int size = strlen(p);
++
++ if (size > 11)
++ size = 11;
++ data[0] = 0;
++ data[1] = 0;
++ data[2] = 0xf0; /* OEM event without timestamp. */
++ data[3] = intf->channels[0].address;
++ data[4] = j++; /* sequence # */
++ /* Always give 11 bytes, so strncpy will fill
++ it with zeroes for me. */
++ strncpy(data+5, p, 11);
++ p += size;
++
++ i_ipmi_request(NULL,
++ intf,
++ &addr,
++ 0,
++ &msg,
++ intf,
++ &smi_msg,
++ &recv_msg,
++ 0,
++ intf->channels[0].address,
++ intf->channels[0].lun,
++ 0, 1); /* no retry, and no wait. */
++ }
++ }
++#endif /* CONFIG_IPMI_PANIC_STRING */
++}
++#endif /* CONFIG_IPMI_PANIC_EVENT */
++
++static int has_panicked;
++
++static int panic_event(struct notifier_block *this,
++ unsigned long event,
++ void *ptr)
++{
++ ipmi_smi_t intf;
++
++ if (has_panicked)
++ return NOTIFY_DONE;
++ has_panicked = 1;
++
++ /* For every registered interface, set it to run to completion. */
++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++ if (!intf->handlers)
++ /* Interface is not ready. */
++ continue;
++
++ intf->handlers->set_run_to_completion(intf->send_info, 1);
++ }
++
++#ifdef CONFIG_IPMI_PANIC_EVENT
++ send_panic_events(ptr);
++#endif
++
++ return NOTIFY_DONE;
++}
++
++static struct notifier_block panic_block = {
++ .notifier_call = panic_event,
++ .next = NULL,
++ .priority = 200 /* priority: INT_MAX >= x >= 0 */
++};
++
++static int ipmi_init_msghandler(void)
++{
++ int rv;
++
++ if (initialized)
++ return 0;
++
++ rv = driver_register(&ipmidriver);
++ if (rv) {
++ printk(KERN_ERR PFX "Could not register IPMI driver\n");
++ return rv;
++ }
++
++ printk(KERN_INFO "ipmi message handler version "
++ IPMI_DRIVER_VERSION "\n");
++
++#ifdef CONFIG_PROC_FS
++ proc_ipmi_root = proc_mkdir("ipmi", NULL);
++ if (!proc_ipmi_root) {
++ printk(KERN_ERR PFX "Unable to create IPMI proc dir");
++ return -ENOMEM;
++ }
++
++ proc_ipmi_root->owner = THIS_MODULE;
++#endif /* CONFIG_PROC_FS */
++
++ setup_timer(&ipmi_timer, ipmi_timeout, 0);
++ mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
++
++ atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
++
++ initialized = 1;
++
++ return 0;
++}
++
++static __init int ipmi_init_msghandler_mod(void)
++{
++ ipmi_init_msghandler();
++ return 0;
++}
++
++static __exit void cleanup_ipmi(void)
++{
++ int count;
++
++ if (!initialized)
++ return;
++
++ atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block);
++
++ /* This can't be called if any interfaces exist, so no worry about
++ shutting down the interfaces. */
++
++ /* Tell the timer to stop, then wait for it to stop. This avoids
++ problems with race conditions removing the timer here. */
++ atomic_inc(&stop_operation);
++ del_timer_sync(&ipmi_timer);
++
++#ifdef CONFIG_PROC_FS
++ remove_proc_entry(proc_ipmi_root->name, &proc_root);
++#endif /* CONFIG_PROC_FS */
++
++ driver_unregister(&ipmidriver);
++
++ initialized = 0;
++
++ /* Check for buffer leaks. */
++ count = atomic_read(&smi_msg_inuse_count);
++ if (count != 0)
++ printk(KERN_WARNING PFX "SMI message count %d at exit\n",
++ count);
++ count = atomic_read(&recv_msg_inuse_count);
++ if (count != 0)
++ printk(KERN_WARNING PFX "recv message count %d at exit\n",
++ count);
++}
++module_exit(cleanup_ipmi);
++
++module_init(ipmi_init_msghandler_mod);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
++MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI interface.");
++MODULE_VERSION(IPMI_DRIVER_VERSION);
++
++EXPORT_SYMBOL(ipmi_create_user);
++EXPORT_SYMBOL(ipmi_destroy_user);
++EXPORT_SYMBOL(ipmi_get_version);
++EXPORT_SYMBOL(ipmi_request_settime);
++EXPORT_SYMBOL(ipmi_request_supply_msgs);
++EXPORT_SYMBOL(ipmi_register_smi);
++EXPORT_SYMBOL(ipmi_unregister_smi);
++EXPORT_SYMBOL(ipmi_register_for_cmd);
++EXPORT_SYMBOL(ipmi_unregister_for_cmd);
++EXPORT_SYMBOL(ipmi_smi_msg_received);
++EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout);
++EXPORT_SYMBOL(ipmi_alloc_smi_msg);
++EXPORT_SYMBOL(ipmi_addr_length);
++EXPORT_SYMBOL(ipmi_validate_addr);
++EXPORT_SYMBOL(ipmi_set_gets_events);
++EXPORT_SYMBOL(ipmi_smi_watcher_register);
++EXPORT_SYMBOL(ipmi_smi_watcher_unregister);
++EXPORT_SYMBOL(ipmi_set_my_address);
++EXPORT_SYMBOL(ipmi_get_my_address);
++EXPORT_SYMBOL(ipmi_set_my_LUN);
++EXPORT_SYMBOL(ipmi_get_my_LUN);
++EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
++EXPORT_SYMBOL(ipmi_user_set_run_to_completion);
++EXPORT_SYMBOL(ipmi_free_recv_msg);
+diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/Kconfig linux-2.6.20.3/drivers/hwmon/Kconfig
+--- linux-2.6.20.3.orig/drivers/hwmon/Kconfig 2007-03-13 19:27:08.000000000 +0100
++++ linux-2.6.20.3/drivers/hwmon/Kconfig 2007-03-14 14:23:02.000000000 +0100
+@@ -218,6 +218,16 @@ config SENSORS_GL520SM
+ This driver can also be built as a module. If so, the module
+ will be called gl520sm.
+
++config SENSORS_IPMI
++ tristate "IPMI Hardware Monitoring Support"
++ depends on HWMON && IPMI_HANDLER && EXPERIMENTAL
++ help
++ If you say yes here you get support for sensors monitored by
++ an IPMI baseboard management controller (BMC).
++
++ This driver can also be built as a module. If so, the module
++ will be called ipmisensors.
++
+ config SENSORS_IT87
+ tristate "ITE IT87xx and compatibles"
+ depends on HWMON && I2C
+diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/Makefile linux-2.6.20.3/drivers/hwmon/Makefile
+--- linux-2.6.20.3.orig/drivers/hwmon/Makefile 2007-03-13 19:27:08.000000000 +0100
++++ linux-2.6.20.3/drivers/hwmon/Makefile 2007-03-14 14:23:02.000000000 +0100
+@@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
+ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
+ obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
+ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
++obj-$(CONFIG_SENSORS_IPMI) += ipmisensors.o
+ obj-$(CONFIG_SENSORS_IT87) += it87.o
+ obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
+ obj-$(CONFIG_SENSORS_LM63) += lm63.o
+diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.c linux-2.6.20.3/drivers/hwmon/ipmisensors.c
+--- linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.3/drivers/hwmon/ipmisensors.c 2007-03-14 14:44:42.000000000 +0100
+@@ -0,0 +1,1552 @@
++/*
++ * ipmisensors.c - lm-sensors/hwmon interface to IPMI sensors.
++ *
++ * Copyright (C) 2004-2006 Yani Ioannou <yani.ioannou@gmail.com>
++ *
++ * Adapted from bmcsensors (lm-sensors for linux 2.4)
++ * bmcsensors (C) Mark D. Studebaker <mdsxyz123@yahoo.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/param.h>
++#include <linux/hwmon.h>
++#include <linux/list.h>
++#include <linux/slab.h>
++#include <linux/device.h>
++#include <linux/hwmon.h>
++
++#include "ipmisensors.h"
++
++/****** Function Prototypes ******/
++static void ipmisensors_send_message(struct ipmisensors_bmc_data *bmc,
++ long msgid, struct kernel_ipmi_msg *msg);
++static void ipmisensors_reserve_sdr(struct ipmisensors_bmc_data *bmc);
++static void ipmisensors_get_sdr(struct ipmisensors_bmc_data *bmc, u16 res_id,
++ u16 record, u8 offset);
++static void ipmisensors_set_sensor_threshold(struct ipmisensors_bmc_data *bmc,
++ u8 number, int value,
++ int lim_index);
++static void ipmisensors_get_reading(struct ipmisensors_bmc_data *bmc,
++ struct sdrdata *sdr);
++static void ipmisensors_msg_handler(struct ipmi_recv_msg *msg,
++ void *user_msg_data);
++static int ipmisensors_intf_registered(int ipmi_intf);
++static int ipmisensors_bmc_registered(struct device *bmc);
++static void ipmisensors_register_bmc(int ipmi_intf, struct ipmi_addr *address);
++static void ipmisensors_unregister_bmc(int ipmi_intf);
++static void ipmisensors_unregister_bmc_all(void);
++static void ipmisensors_new_smi(int if_num, struct device *dev);
++static void ipmisensors_smi_gone(int if_num);
++static void ipmisensors_update_bmc(struct work_struct *);
++static void ipmisensors_cleanup(void);
++
++/****** Static Vars ******/
++
++/* set when module is being removed */
++static int cleanup = 0;
++
++/* ipmisensors driver data */
++static struct ipmisensors_data driver_data = {
++ .driver_name = "bmc",
++ .bmc_data = LIST_HEAD_INIT(driver_data.bmc_data),
++ .interfaces = 0,
++ .smi_watcher = {
++ .owner = THIS_MODULE,
++ .new_smi = ipmisensors_new_smi,
++ .smi_gone = ipmisensors_smi_gone,
++ },
++ .ipmi_hndlrs = {
++ .ipmi_recv_hndl = ipmisensors_msg_handler,
++ },
++};
++
++/* sensor refresh workqueue */
++static struct workqueue_struct *ipmisensors_workqueue;
++
++/****** SDR List Functions ******/
++/**
++ * Creates a new sdrdata struct, or returns NULL if insufficient memory.
++ */
++static struct sdrdata *ipmisensors_new_sdr(void)
++{
++ struct sdrdata *sdr;
++
++ sdr = kmem_cache_alloc(driver_data.sdrdata_cache, GFP_ATOMIC);
++ if (sdr) {
++ memset(sdr, 0, sizeof(struct sdrdata));
++ } else {
++ printk(KERN_ERR
++ "ipmisensors: Couldn't allocate memory for new SDR\n");
++ }
++
++ return sdr;
++}
++
++/**
++ * Adds the given sdrdata struct to the given bmc's SDR list.
++ *
++ * @bmc: the bmc to send the message to.
++ */
++static inline void ipmisensors_add_sdr(struct ipmisensors_bmc_data *bmc,
++ struct sdrdata *sdr)
++{
++ list_add(&sdr->list, &bmc->sdrs);
++ printk(KERN_DEBUG
++ "ipmisensors: SDR %d: type 0x%02x (%s)\n",
++ bmc->sdr_count, sdr->stype, sdr->id);
++ bmc->sdr_count++;
++}
++
++/**
++ * Cleanup the sdr list for the given BMC.
++ *
++ * @bmc: the bmc to send the message to.
++ */
++static void ipmisensors_sdr_cleanup(struct ipmisensors_bmc_data *bmc)
++{
++ struct sdrdata *cursor, *next;
++
++ /* find and free each sdr data struct */
++ list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) {
++ device_remove_file(bmc->dev, &cursor->attr.dev_attr);
++ device_remove_file(bmc->dev, &cursor->attr_min.dev_attr);
++ device_remove_file(bmc->dev, &cursor->attr_max.dev_attr);
++ device_remove_file(bmc->dev, &cursor->attr_label.dev_attr);
++
++ kfree(cursor->attr_name);
++ kfree(cursor->attr_max_name);
++ kfree(cursor->attr_min_name);
++ kfree(cursor->attr_label_name);
++
++ list_del(&cursor->list);
++ kmem_cache_free(driver_data.sdrdata_cache, cursor);
++ }
++}
++
++/* worker function for workqueue ipmisensors_workqueue */
++static void ipmisensors_update_bmc(struct work_struct *work)
++{
++ struct ipmisensors_bmc_data *bmc = container_of(work, struct ipmisensors_bmc_data, update_work.work);
++
++ /* don't start an update cycle if one already in progress */
++ if (bmc->state != STATE_READING) {
++ struct sdrdata *cursor, *next;
++ bmc->state = STATE_READING;
++ printk(KERN_DEBUG "ipmisensors: starting update\n");
++
++ /* init semaphore to 1 for update cycle */
++ sema_init(&bmc->update_semaphore, 1);
++
++ /* update each sdr reading */
++ list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) {
++ ipmisensors_get_reading(bmc, cursor);
++ }
++ }
++
++ /* wait for readings (need timeout?) */
++ down_interruptible(&bmc->update_semaphore);
++
++ printk(KERN_DEBUG "ipmisensors: update complete\n");
++
++ bmc->state = STATE_DONE;
++
++ /* if the module isn't cleaning up, schedule another update */
++ if (!cleanup)
++ queue_delayed_work(ipmisensors_workqueue, &bmc->update_work,
++ bmc->update_period * HZ);
++}
++
++/****** IPMI Message Sending ******/
++
++/**
++ * Send a message to the IPMI BMC
++ *
++ * @bmc: the bmc to send the message to.
++ * @msgid: the message id to use.
++ * @msg: the ipmi message structure.
++ */
++static void ipmisensors_send_message(struct ipmisensors_bmc_data *bmc,
++ long msgid, struct kernel_ipmi_msg *msg)
++{
++ if (msg->data == NULL)
++ printk(KERN_DEBUG "ipmisensors: Send 0x%x\n", msg->cmd);
++ else
++ printk(KERN_DEBUG "ipmisensors: Send 0x%x 0x%x 0x%x\n",
++ msg->cmd, msg->data[0], msg->data[1]);
++
++ /* This should be ipmi_request, but Corey had to remove
++ * that due to it being unused at the moment, as soon as
++ * this makes it into the kernel we should request it be re-instated.
++ */
++ ipmi_request_settime(bmc->user, &bmc->address, msgid, msg, bmc, 0,
++ -1, 0);
++}
++
++/**
++ * Compose and send a "reserve SDR" message
++ *
++ * @bmc: the bmc to send the message to.
++ */
++static void ipmisensors_reserve_sdr(struct ipmisensors_bmc_data *bmc)
++{
++ bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST;
++ bmc->tx_message.cmd = IPMI_RESERVE_SDR;
++ bmc->tx_message.data_len = 0;
++ bmc->tx_message.data = NULL;
++
++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++}
++
++/**
++ * Componse and send a "get SDR" message
++ *
++ * @bmc: the bmc to send the message to.
++ * @res_id:
++ * @record:
++ * @offset:
++ */
++static void ipmisensors_get_sdr(struct ipmisensors_bmc_data *bmc, u16 res_id,
++ u16 record, u8 offset)
++{
++ printk(KERN_DEBUG "ipmisensors: Get SDR 0x%x 0x%x 0x%x\n",
++ res_id, record, offset);
++ bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST;
++ bmc->tx_message.cmd = IPMI_GET_SDR;
++ bmc->tx_message.data_len = 6;
++ bmc->tx_message.data = bmc->tx_msg_data;
++ bmc->tx_msg_data[0] = res_id & 0xff;
++ bmc->tx_msg_data[1] = res_id >> 8;
++ bmc->tx_msg_data[2] = record & 0xff;
++ bmc->tx_msg_data[3] = record >> 8;
++ bmc->tx_msg_data[4] = offset;
++ bmc->tx_msg_data[5] = bmc->ipmi_sdr_partial_size;
++
++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++}
++
++/**
++ * Compose and send a "set sensor threshold" message
++ *
++ * @bmc: the bmc to send the message to.
++ * @id: the ipmi id number of the sensor.
++ * @value: the new value for the threshold.
++ * @lim_index: the index in the lim[] array for which this value applies.
++ */
++static void ipmisensors_set_sensor_threshold(struct ipmisensors_bmc_data *bmc,
++ u8 number, int value,
++ int lim_index)
++{
++ int i;
++
++ printk(KERN_DEBUG "ipmisensors: Set SDR Threshold %d %d %d\n",
++ number, value, lim_index);
++ bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST;
++ bmc->tx_message.cmd = IPMI_SET_SENSOR_THRESHOLD;
++ bmc->tx_message.data_len = 8;
++ bmc->tx_message.data = bmc->tx_msg_data;
++ bmc->tx_msg_data[0] = number & 0xff;
++ bmc->tx_msg_data[1] = 0x01 << lim_index;
++
++ if (lim_index > 5 || lim_index < 0) {
++ printk(KERN_INFO
++ "ipmisensors: Error - ipmisensors_set_sensor_threshold given invalid lim_index\n");
++ return;
++ }
++
++ for (i = 2; i < 8; i++)
++ bmc->tx_msg_data[i] = 0x00;
++
++ bmc->tx_msg_data[lim_index] = value && 0xff;
++
++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++}
++
++/**
++ * Compose and send a "get sensor reading" message for the given sdr.
++ *
++ * @bmc: the bmc to send the message to.
++ * @sdr: the sdr of the sensor to get the reading for.
++ */
++static void ipmisensors_get_reading(struct ipmisensors_bmc_data *bmc,
++ struct sdrdata *sdr)
++{
++ bmc->tx_message.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST;
++ bmc->tx_message.cmd = IPMI_GET_SENSOR_STATE_READING;
++ bmc->tx_message.data_len = 1;
++ bmc->tx_message.data = bmc->tx_msg_data;
++ bmc->tx_msg_data[0] = sdr->number;
++ bmc->current_sdr = sdr;
++
++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++ down_interruptible(&bmc->update_semaphore);
++}
++
++/****** IPMI Message Receiving ******/
++
++/**
++ * Process an sensor reading response message.
++ *
++ * @bmc: the bmc the message is from
++ * @msg: the IPMI SDR response message
++ */
++static void ipmisensors_rcv_reading_msg(struct ipmisensors_bmc_data *bmc,
++ struct kernel_ipmi_msg *msg)
++{
++ struct sdrdata *sdr = bmc->current_sdr;
++
++ if (sdr == NULL) {
++ printk(KERN_ERR
++ "ipmisensors: Error ipmisensors_rcv_reading with NULL sdr\n");
++ return;
++ }
++
++ sdr->reading = msg->data[1];
++ sdr->status = msg->data[2];
++ sdr->thresholds = msg->data[3];
++
++ printk(KERN_DEBUG "ipmisensors: sensor %d (type %d) reading %d\n",
++ sdr->number, sdr->stype, msg->data[1]);
++
++ up(&bmc->update_semaphore);
++}
++
++/**
++ * Unpack based on string type, convert to normal, null terminate.
++ */
++static void ipmisensors_sprintf(u8 * to, u8 * from, u8 type, u8 length)
++{
++ static const u8 *bcdplus = "0123456789 -.:,_";
++ int i;
++
++ switch (type) {
++ case 0: /* unicode */
++ for (i = 0; i < length; i++)
++ *to++ = (*from++ & 0x7f);
++ *to = 0;
++ break;
++ case 1: /* BCD Plus */
++ for (i = 0; i < length; i++)
++ *to++ = bcdplus[*from++ & 0x0f];
++ *to = 0;
++ break;
++ case 2: /* packed ascii *//* if not a mult. of 3 this will run over */
++ for (i = 0; i < length; i += 3) {
++ *to++ = *from & 0x3f;
++ *to++ = *from >> 6 | ((*(from+1) & 0xf) << 2);
++ from++;
++ *to++ = *from >> 4 | ((*(from+1) & 0x3) << 4);
++ from++;
++ *to++ = (*from++ >> 2) & 0x3f;
++ }
++ *to = 0;
++ break;
++ case 3: /* normal */
++ if (length > 1)
++ memcpy(to, from, length);
++ to[length] = 0;
++ break;
++ }
++}
++
++/* IPMI V1.5 Section 30 */
++static const int exps[] =
++ { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000 };
++
++/* Return 0 for fan, 2 for temp, 3 for voltage
++ We could make it variable based on the accuracy (= log10(m * 10**k2));
++ this would work for /proc output, however libsensors resolution
++ is statically set in lib/chips.c */
++static int decplaces(struct sdrdata *sd)
++{
++ switch (sd->stype) {
++ case STYPE_TEMP:
++ return 2;
++ case STYPE_CURR:
++ case STYPE_VOLT:
++ return 3;
++ case STYPE_FAN:
++ default:
++ return 0;
++ }
++}
++
++/* convert a raw value to a reading. IMPI V1.5 Section 30 */
++static long conv_val(int value, struct sdrdata *sd)
++{
++ u8 k1, k2;
++ long r;
++
++ r = value * sd->m;
++ k1 = sd->k & 0x0f;
++ k2 = sd->k >> 4;
++ if (k1 < 8)
++ r += sd->b * exps[k1];
++ else
++ r += sd->b / exps[16 - k1];
++ r *= exps[decplaces(sd)];
++ if (k2 < 8) {
++ if (sd->linear != 7)
++ r *= exps[k2];
++ else
++ /* this will always truncate to 0: r = 1 / (exps[k2] * r); */
++ r = 0;
++ } else {
++ if (sd->linear != 7)
++ r /= exps[16 - k2];
++ else {
++ if (r != 0)
++ /* 1 / x * 10 ** (-m) == 10 ** m / x */
++ r = exps[16 - k2] / r;
++ else
++ r = 0;
++ }
++ }
++
++ return r;
++}
++
++static const char *threshold_text[] = {
++ "upper non-recoverable threshold",
++ "upper critical threshold",
++ "upper non-critical threshold",
++ "lower non-recoverable threshold",
++ "lower critical threshold",
++ "lower non-critical threshold",
++ "positive-going hysteresis",
++ "negative-going hysteresis" /* unused */
++};
++
++/* select two out of the 8 possible readable thresholds, and place indexes into the limits
++ array into lim1 and lim2. Set writable flags */
++static void ipmisensors_select_thresholds(struct sdrdata *sd)
++{
++ u8 capab = sd->capab;
++ u16 mask = sd->thresh_mask;
++ int tmp;
++
++ sd->lim1 = -1;
++ sd->lim2 = -1;
++ sd->lim1_write = 0;
++ sd->lim2_write = 0;
++
++ if (((capab & 0x0c) == 0x04) || /* readable thresholds ? */
++ ((capab & 0x0c) == 0x08)) {
++ /* select upper threshold */
++ if (mask & 0x10) { /* upper crit */
++ sd->lim1 = 1;
++ if ((capab & 0x0c) == 0x08 && (mask & 0x1000))
++ sd->lim1_write = 1;
++ } else if (mask & 0x20) { /* upper non-recov */
++ sd->lim1 = 0;
++ if ((capab & 0x0c) == 0x08 && (mask & 0x2000))
++ sd->lim1_write = 1;
++ } else if (mask & 0x08) { /* upper non-crit */
++ sd->lim1 = 2;
++ if ((capab & 0x0c) == 0x08 && (mask & 0x0800))
++ sd->lim1_write = 1;
++ }
++
++ /* select lower threshold */
++ if ((((capab & 0x30) == 0x10) || /* readable ? */
++ ((capab & 0x30) == 0x20)) && /* pos hyst */
++ sd->stype == STYPE_TEMP)
++ sd->lim2 = 6;
++ else if (mask & 0x02) { /* lower crit */
++ sd->lim2 = 4;
++ if ((capab & 0x0c) == 0x08 && (mask & 0x0200))
++ sd->lim2_write = 1;
++ } else if (mask & 0x04) { /* lower non-recov */
++ sd->lim2 = 3;
++ if ((capab & 0x0c) == 0x08 && (mask & 0x0400))
++ sd->lim2_write = 1;
++ } else if (mask & 0x01) { /* lower non-crit */
++ sd->lim2 = 5;
++ if ((capab & 0x0c) == 0x08 && (mask & 0x0100))
++ sd->lim2_write = 1;
++ }
++ }
++
++ /* swap lim1/lim2 if m < 0 or function is 1/x (but not both!) */
++ if ((sd->m < 0 && sd->linear != 7) || (sd->m >= 0 && sd->linear == 7)) {
++ tmp = sd->lim1;
++ sd->lim1 = sd->lim2;
++ sd->lim2 = tmp;
++ }
++
++ if (sd->lim1 >= 0)
++ printk(KERN_INFO "ipmisensors: using %s for upper limit\n",
++ threshold_text[sd->lim1]);
++ else
++ printk(KERN_DEBUG "ipmisensors: no readable upper limit\n");
++
++ if (sd->lim2 >= 0)
++ printk(KERN_INFO "ipmisensors: using %s for lower limit\n",
++ threshold_text[sd->lim2]);
++ else
++ printk(KERN_DEBUG "ipmisensors: no readable lower limit\n");
++}
++
++/************* sysfs callback functions *********/
++static ssize_t show_update_period(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct ipmisensors_bmc_device_attribute *aattr =
++ to_ipmisensors_bmc_dev_attr(attr);
++
++ return snprintf(buf, 20, "%d\n", aattr->bmc->update_period);
++}
++
++static ssize_t store_update_period(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct ipmisensors_bmc_device_attribute *aattr =
++ to_ipmisensors_bmc_dev_attr(attr);
++
++ aattr->bmc->update_period = simple_strtoul(buf, NULL, 10);;
++ return count;
++};
++
++static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct ipmisensors_device_attribute *sattr =
++ to_ipmisensors_dev_attr(attr);
++ return snprintf(buf, 20, "%ld\n",
++ conv_val(sattr->sdr->reading, sattr->sdr));
++}
++
++static ssize_t show_sensor_max(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ long max = 0;
++ struct ipmisensors_device_attribute *sattr =
++ to_ipmisensors_dev_attr(attr);
++
++ if (sattr->sdr->lim1 >= 0)
++ max = conv_val(sattr->sdr->limits[sattr->sdr->lim1],
++ sattr->sdr);
++ return snprintf(buf, 20, "%ld\n", max);
++}
++
++static ssize_t show_sensor_min(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ long min = 0;
++ struct ipmisensors_device_attribute *sattr =
++ to_ipmisensors_dev_attr(attr);
++
++ if (sattr->sdr->lim2 >= 0)
++ min = conv_val(sattr->sdr->limits[sattr->sdr->lim2],
++ sattr->sdr);
++ return snprintf(buf, 20, "%ld\n", min);
++};
++
++static ssize_t show_sensor_label(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ u8 label[SDR_MAX_UNPACKED_ID_LENGTH];
++ struct ipmisensors_device_attribute *sattr =
++ to_ipmisensors_dev_attr(attr);
++
++ ipmisensors_sprintf(label, sattr->sdr->id, sattr->sdr->string_type,
++ sattr->sdr->id_length);
++ return snprintf(buf, 20, "%s\n", label);
++};
++
++static ssize_t store_sensor_max(struct device *dev,
++ struct device_attribute *attr, const char *buf,
++ size_t count)
++{
++ long val = simple_strtoul(buf, NULL, 10);
++ struct ipmisensors_device_attribute *sattr =
++ to_ipmisensors_dev_attr(attr);
++ printk(KERN_DEBUG "ipmisensors: set max on sensor #%d to %ld",
++ sattr->sdr->number, val);
++ ipmisensors_set_sensor_threshold(sattr->sdr->bmc, sattr->sdr->number,
++ val, sattr->sdr->lim1);
++ return count;
++};
++
++static ssize_t store_sensor_min(struct device *dev,
++ struct device_attribute *attr, const char *buf,
++ size_t count)
++{
++ long val = simple_strtoul(buf, NULL, 10);
++ struct ipmisensors_device_attribute *sattr =
++ to_ipmisensors_dev_attr(attr);
++ printk(KERN_DEBUG "ipmisensors: set min on sensor #%d to %ld",
++ sattr->sdr->number, val);
++ ipmisensors_set_sensor_threshold(sattr->sdr->bmc, sattr->sdr->number,
++ val, sattr->sdr->lim2);
++ return count;
++};
++
++static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct ipmisensors_bmc_device_attribute *aattr =
++ to_ipmisensors_bmc_dev_attr(attr);
++ return snprintf(buf, 20, "%d\n", aattr->bmc->alarms);
++};
++
++static ssize_t show_name(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ return snprintf(buf, 20, "%s\n", driver_data.driver_name);
++};
++
++/* work function to build the sysfs entries using the ipmi sdrs */
++static void ipmisensors_build_sysfs(struct work_struct *work)
++{
++ int temps = 0, volts = 0, currs = 0, fans = 0;
++ struct sdrdata *cursor, *next;
++ struct ipmisensors_bmc_data *bmc = container_of(work, struct ipmisensors_bmc_data, sysfs_work);
++
++ /* find and create entries for each sdr data struct */
++ list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) {
++ u8 id[SDR_MAX_UNPACKED_ID_LENGTH];
++
++ cursor->attr_name =
++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++ GFP_KERNEL);
++ cursor->attr_max_name =
++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++ GFP_KERNEL);
++ cursor->attr_min_name =
++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++ GFP_KERNEL);
++
++ if (cursor->id_length > 0) {
++ cursor->attr_label_name =
++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++ GFP_KERNEL);
++
++ if (cursor->attr_label_name == NULL) {
++ printk(KERN_INFO
++ "ipmisensors: Out of memory (kmalloc failed)");
++ kfree(cursor->attr_name);
++ kfree(cursor->attr_max_name);
++ kfree(cursor->attr_min_name);
++ return;
++ }
++ }
++
++ if (cursor->attr_name == NULL || cursor->attr_max_name == NULL
++ || cursor->attr_min_name == NULL
++ || cursor->attr_label_name == NULL) {
++ printk(KERN_INFO
++ "ipmisensors: Out of memory (kmalloc failed)");
++ kfree(cursor->attr_name);
++ kfree(cursor->attr_max_name);
++ kfree(cursor->attr_min_name);
++ kfree(cursor->attr_label_name);
++ return;
++ }
++
++ switch (cursor->stype) {
++ case (STYPE_TEMP):
++ /* create the name of the sensor */
++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++ "temp%d_input", ++temps);
++ /* create min, max attributes */
++ snprintf(cursor->attr_max_name, MAX_FILENAME_LENGTH,
++ "temp%d_max", temps);
++ snprintf(cursor->attr_min_name, MAX_FILENAME_LENGTH,
++ "temp%d_min", temps);
++ /* create the label of the sensor */
++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++ "temp%d_label", temps);
++ break;
++ case (STYPE_VOLT):
++ /* create the name of the sensor */
++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++ "in%d_input", ++volts);
++ /* create min, max attributes */
++ snprintf(cursor->attr_max_name, MAX_FILENAME_LENGTH,
++ "in%d_max", volts);
++ snprintf(cursor->attr_min_name, MAX_FILENAME_LENGTH,
++ "in%d_min", volts);
++ /* create the label of the sensor */
++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++ "in%d_label", volts);
++ break;
++ case (STYPE_CURR):
++ /* create the name of the sensor */
++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++ "curr%d_input", ++currs);
++ /* create min, max attributes */
++ sprintf(cursor->attr_max_name, "curr%d_max", currs);
++ sprintf(cursor->attr_min_name, "curr%d_min", currs);
++ /* create the label of the sensor */
++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++ "curr%d_label", currs);
++ break;
++ case (STYPE_FAN):
++ /* create the name of the sensor */
++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++ "fan%d_input", ++fans);
++ /* create min, max attributes */
++ sprintf(cursor->attr_max_name, "fan%d_max", fans);
++ sprintf(cursor->attr_min_name, "fan%d_min", fans);
++ /* create the label of the sensor */
++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++ "fan%d_label", fans);
++ break;
++ default:
++ printk(KERN_INFO "ipmisensors: unkown sensor type\n");
++ continue;
++ }
++
++ cursor->attr.dev_attr.attr.name = cursor->attr_name;
++ cursor->attr.dev_attr.attr.mode = S_IRUGO;
++ cursor->attr.dev_attr.attr.owner = THIS_MODULE;
++ cursor->attr.dev_attr.show = show_sensor;
++ cursor->attr.dev_attr.store = NULL;
++ cursor->attr.sdr = cursor;
++
++ cursor->attr_min.dev_attr.attr.name = cursor->attr_min_name;
++ cursor->attr_min.dev_attr.attr.owner = THIS_MODULE;
++ cursor->attr_min.dev_attr.show = show_sensor_min;
++ cursor->attr_min.sdr = cursor;
++
++ if (cursor->lim2_write) {
++ printk(KERN_INFO
++ "ipmisensors: You have a writable sensor threshold! Send me an e-mail at <yani.ioannou@gmail.com>.\n");
++ cursor->attr_min.dev_attr.store = store_sensor_min;
++ cursor->attr_min.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
++ } else {
++ cursor->attr_min.dev_attr.store = NULL;
++ cursor->attr_min.dev_attr.attr.mode = S_IRUGO;
++ }
++
++ cursor->attr_max.dev_attr.attr.name = cursor->attr_max_name;
++ cursor->attr_max.dev_attr.attr.owner = THIS_MODULE;
++ cursor->attr_max.dev_attr.show = show_sensor_max;
++ cursor->attr_max.sdr = cursor;
++
++ if (cursor->lim1_write) {
++ printk(KERN_INFO
++ "ipmisensors: You have a writable sensor threshold! Send me an e-mail at <yani.ioannou@gmail.com>.\n");
++ cursor->attr_max.dev_attr.store = store_sensor_max;
++ cursor->attr_max.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
++ } else {
++ cursor->attr_max.dev_attr.store = NULL;
++ cursor->attr_max.dev_attr.attr.mode = S_IRUGO;
++ }
++
++ if (cursor->id_length > 0) {
++ cursor->attr_label.dev_attr.attr.name =
++ cursor->attr_label_name;
++ cursor->attr_label.dev_attr.attr.mode = S_IRUGO;
++ cursor->attr_label.dev_attr.attr.owner = THIS_MODULE;
++ cursor->attr_label.dev_attr.show = show_sensor_label;
++ cursor->attr_label.dev_attr.store = NULL;
++ cursor->attr_label.sdr = cursor;
++ }
++
++ printk(KERN_INFO
++ "ipmisensors: registering sensor %d: (type 0x%.2x) "
++ "(fmt=%d; m=%d; b=%d; k1=%d; k2=%d; cap=0x%.2x; mask=0x%.4x)\n",
++ cursor->number, cursor->stype, cursor->format, cursor->m,
++ cursor->b, cursor->k & 0xf, cursor->k >> 4,
++ cursor->capab, cursor->thresh_mask);
++
++ if (cursor->id_length > 0) {
++ ipmisensors_sprintf(id, cursor->id, cursor->string_type,
++ cursor->id_length);
++ switch (cursor->stype) {
++ case (STYPE_TEMP):
++ printk(KERN_INFO
++ "ipmisensors: sensors.conf: label temp%d \"%s\"\n",
++ temps, id);
++ break;
++ case (STYPE_VOLT):
++ printk(KERN_INFO
++ "ipmisensors: sensors.conf: label in%d \"%s\"\n",
++ volts, id);
++ break;
++ case (STYPE_CURR):
++ printk(KERN_INFO
++ "ipmisensors: sensors.conf: label curr%d \"%s\"\n",
++ currs, id);
++ break;
++ case (STYPE_FAN):
++ printk(KERN_INFO
++ "ipmisensors: sensors.conf: label fan%d \"%s\"\n",
++ fans, id);
++ break;
++ }
++ }
++
++ ipmisensors_select_thresholds(cursor);
++
++ if (cursor->linear != 0 && cursor->linear != 7) {
++ printk(KERN_INFO
++ "ipmisensors: sensor %d: nonlinear function 0x%.2x unsupported, expect bad results\n",
++ cursor->number, cursor->linear);
++ }
++
++ if ((cursor->format & 0x03) == 0x02) {
++ printk(KERN_INFO
++ "ipmisensors: sensor %d: 1's complement format unsupported, expect bad results\n",
++ cursor->number);
++ } else if ((cursor->format & 0x03) == 0x03) {
++ printk(KERN_INFO
++ "ipmisensors: sensor %d: threshold sensor only, no readings available",
++ cursor->number);
++ }
++
++ if (cursor->lim1_write || cursor->lim2_write)
++ cursor->attr.dev_attr.attr.mode = 0644;
++ else
++ cursor->attr.dev_attr.attr.mode = 0444;
++
++ if (device_create_file(bmc->dev, &cursor->attr.dev_attr) < 0
++ || device_create_file(bmc->dev,
++ &cursor->attr_min.dev_attr) < 0
++ || device_create_file(bmc->dev,
++ &cursor->attr_max.dev_attr) < 0
++ || (cursor->id_length >
++ 0 ? device_create_file(bmc->dev,
++ &cursor->attr_label.dev_attr) <
++ 0 : 0)
++ ) {
++ printk(KERN_INFO
++ "ipmisensors: sysfs file creation failed for SDR %d (%s).\n",
++ cursor->number, cursor->id);
++ kfree(cursor->attr_name);
++ kfree(cursor->attr_max_name);
++ kfree(cursor->attr_min_name);
++ kfree(cursor->attr_label_name);
++ return;
++ }
++ }
++
++ bmc->alarms_attr.dev_attr.attr.name = "alarms";
++ bmc->alarms_attr.dev_attr.attr.mode = S_IRUGO;
++ bmc->alarms_attr.dev_attr.attr.owner = THIS_MODULE;
++ bmc->alarms_attr.dev_attr.show = show_alarms;
++ bmc->alarms_attr.dev_attr.store = NULL;
++ bmc->alarms_attr.bmc = bmc;
++
++ if (device_create_file(bmc->dev, &bmc->alarms_attr.dev_attr) < 0) {
++ printk(KERN_INFO
++ "ipmisensors: Failed to create sysfs entry 'alarms'");
++ return;
++ }
++
++ bmc->name_attr.attr.name = "name";
++ bmc->name_attr.attr.mode = S_IRUGO;
++ bmc->name_attr.attr.owner = THIS_MODULE;
++ bmc->name_attr.show = show_name;
++
++ if (device_create_file(bmc->dev, &bmc->name_attr) < 0) {
++ printk(KERN_INFO
++ "ipmisensors: Failed to create sysfs entry 'name'");
++ return;
++ }
++
++ bmc->update_attr.dev_attr.attr.name = "update_period";
++ bmc->update_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
++ bmc->update_attr.dev_attr.attr.owner = THIS_MODULE;
++ bmc->update_attr.dev_attr.show = show_update_period;
++ bmc->update_attr.dev_attr.store = store_update_period;
++ bmc->update_attr.bmc = bmc;
++
++ if (device_create_file(bmc->dev, &bmc->update_attr.dev_attr) < 0) {
++ printk(KERN_INFO
++ "ipmisensors: Failed to create sysfs entry 'update_period'");
++ return;
++ }
++
++ printk(KERN_INFO
++ "ipmisensors: registered %d temp, %d volt, %d current, %d fan sensors\n",
++ temps, volts, currs, fans);
++
++ /* This completes the initialization. We can now kickoff the
++ * periodic update of the bmc sensor's values by scheduling
++ * the first work.
++ */
++ queue_work(ipmisensors_workqueue, &bmc->update_work.work);
++
++}
++
++/**
++ * Process an SDR response message, save the SDRs we like in the sdr
++ * list for the given BMC.
++ *
++ * @bmc: the bmc the message is from
++ * @msg: the IPMI SDR response message
++ */
++static void ipmisensors_rcv_sdr_msg(struct ipmisensors_bmc_data *bmc,
++ struct kernel_ipmi_msg *msg)
++{
++ u16 record;
++ int type;
++ int stype;
++ int id_length;
++ int i;
++ int ipmi_ver = 0;
++ unsigned char *data;
++ u8 id[SDR_MAX_UNPACKED_ID_LENGTH];
++ struct sdrdata *sdr;
++
++ if (msg->data[0] != 0) {
++ /* cut request in half and try again */
++ bmc->ipmi_sdr_partial_size /= 2;
++ if (bmc->ipmi_sdr_partial_size < 8) {
++ printk(KERN_INFO
++ "ipmisensors: IPMI buffers too small, giving up\n");
++ bmc->state = STATE_DONE;
++ return;
++ }
++ printk(KERN_DEBUG
++ "ipmisensors: Reducing SDR request size to %d\n",
++ bmc->ipmi_sdr_partial_size);
++
++ ipmisensors_get_sdr(bmc, 0, 0, 0);
++ bmc->state = STATE_SDR;
++ return;
++ }
++ if (bmc->ipmi_sdr_partial_size < IPMI_SDR_SIZE) {
++ if (bmc->rx_msg_data_offset == 0) {
++ memcpy(bmc->rx_msg_data, msg->data,
++ bmc->ipmi_sdr_partial_size + 3);
++ bmc->rx_msg_data_offset =
++ bmc->ipmi_sdr_partial_size + 3;
++ } else {
++ memcpy(bmc->rx_msg_data + bmc->rx_msg_data_offset,
++ msg->data + 3, bmc->ipmi_sdr_partial_size);
++ bmc->rx_msg_data_offset += bmc->ipmi_sdr_partial_size;
++ }
++ if (bmc->rx_msg_data_offset > bmc->rx_msg_data[7] + 7) {
++ /* got last chunk */
++ bmc->rx_msg_data_offset = 0;
++ data = bmc->rx_msg_data;
++ } else {
++ /* get more */
++ record =
++ (bmc->rx_msg_data[4] << 8) | bmc->rx_msg_data[3];
++ ipmisensors_get_sdr(bmc, bmc->resid, record,
++ bmc->rx_msg_data_offset - 3);
++ bmc->state = STATE_SDR;
++ return;
++ }
++ } else {
++ /* got it in one chunk */
++ data = msg->data;
++ }
++
++ bmc->nextrecord = (data[2] << 8) | data[1];
++
++ /* If the ipmi version is 0.9 we have to remap some things.
++ * Yes this is very ugly, but we aren't the ones who
++ * implemented an incomplete spec!
++ */
++ ipmi_ver = data[5];
++
++ type = data[6];
++ /* known SDR type */
++ if (type == 1 || type == 2) {
++ stype = data[(ipmi_ver == 0x90 ? 16 : 15)];
++ /* known sensor type */
++ if (stype <= STYPE_MAX) {
++ if (data[(ipmi_ver == 0x90 ? 17 : 16)] != 0x01) {
++ if (type == 1)
++ ipmisensors_sprintf(id, &data[51],
++ data[50] >> 6,
++ data[50] & 0x1f);
++ else
++ ipmisensors_sprintf(id,
++ &data[(ipmi_ver ==
++ 0x90 ? 30 :
++ 35)],
++ data[(ipmi_ver ==
++ 0x90 ? 29 :
++ 34)] >> 6,
++ data[(ipmi_ver ==
++ 0x90 ? 29 :
++ 34)] & 0x1f);
++ printk(KERN_INFO
++ "ipmisensors: skipping non-threshold sensor \"%s\"\n",
++ id);
++ } else {
++ /* add entry to sdrd table */
++ sdr = ipmisensors_new_sdr();
++ if (!sdr) {
++ printk(KERN_ERR
++ "ipmisensors: could not allocate memory for new SDR");
++ return;
++ }
++ sdr->bmc = bmc;
++ sdr->stype = stype;
++ sdr->number = data[10];
++ sdr->capab = data[(ipmi_ver == 0x90 ? 15 : 14)];
++ sdr->thresh_mask =
++ (((u16) data[(ipmi_ver == 0x90 ? 21 : 22)])
++ << 8) | data[21];
++ if (type == 1) {
++ sdr->format =
++ data[(ipmi_ver ==
++ 0x90 ? 22 : 24)] >> 6;
++ sdr->linear =
++ data[(ipmi_ver ==
++ 0x90 ? 25 : 26)] & 0x7f;
++ sdr->m =
++ data[(ipmi_ver == 0x90 ? 26 : 27)];
++ sdr->m |= ((u16)
++ (data
++ [(ipmi_ver ==
++ 0x90 ? 27 : 28)]
++ & 0xc0)) << 2;
++ if (sdr->m & 0x0200) {
++ /* sign extend */
++ sdr->m |= 0xfc00;
++ }
++ sdr->b =
++ data[(ipmi_ver == 0x90 ? 28 : 29)];
++ sdr->b |= ((u16)
++ (data
++ [(ipmi_ver ==
++ 0x90 ? 29 : 30)]
++ & 0xc0)) << 2;
++ if (sdr->b & 0x0200) {
++ /* sign extend */
++ sdr->b |= 0xfc00;
++ }
++ sdr->k =
++ data[(ipmi_ver == 0x90 ? 31 : 32)];
++ sdr->nominal =
++ data[(ipmi_ver == 0x90 ? 33 : 34)];
++ for (i = 0; i < SDR_LIMITS; i++) {
++ /* assume readable */
++ sdr->limits[i] =
++ data[(ipmi_ver ==
++ 0x90 ? 40 : 39) + i];
++ }
++ sdr->string_type = data[50] >> 6;
++ id_length = data[50] & 0x1f;
++ memcpy(sdr->id, &data[51], id_length);
++ sdr->id_length = id_length;
++ } else {
++ sdr->m = 1;
++ sdr->b = 0;
++ sdr->k = 0;
++ sdr->string_type =
++ data[(ipmi_ver ==
++ 0x90 ? 29 : 34)] >> 6;
++ id_length = data[34] & 0x1f;
++ if (id_length > 0) {
++ memcpy(sdr->id,
++ &data[(ipmi_ver ==
++ 0x90 ? 30 : 35)],
++ id_length);
++ }
++ sdr->id_length = id_length;
++ /* limits?? */
++ if (ipmi_ver == 0x90) {
++ memcpy(sdr->id,
++ &data[30], id_length);
++ sdr->id_length = id_length;
++ }
++ }
++ ipmisensors_add_sdr(bmc, sdr);
++ }
++ }
++ /* peek at the other SDR types */
++ } else if (type == 0x10 || type == 0x11 || type == 0x12) {
++ ipmisensors_sprintf(id, data + 19, data[18] >> 6,
++ data[18] & 0x1f);
++ if (type == 0x10) {
++ printk(KERN_INFO
++ "ipmisensors: Generic Device acc=0x%x; slv=0x%x; lun=0x%x; type=0x%x; \"%s\"\n",
++ data[8], data[9], data[10], data[13], id);
++ } else if (type == 0x11) {
++ printk(KERN_INFO
++ "ipmisensors: FRU Device acc=0x%x; slv=0x%x; log=0x%x; ch=0x%x; type=0x%x; \"%s\"\n",
++ data[8], data[9], data[10], data[11], data[13],
++ id);
++ } else {
++ printk(KERN_INFO
++ "ipmisensors: Mgmt Ctllr Device slv=0x%x; \"%s\"\n",
++ data[8], id);
++ }
++ } else if (type == 0x14) {
++ printk(KERN_INFO
++ "ipmisensors: Message Channel Info Records:\n");
++ for (i = 0; i < 8; i++) {
++ printk(KERN_INFO "ipmisensors: Channel %d info 0x%x\n",
++ i, data[9 + i]);
++ }
++ } else {
++ printk(KERN_INFO "ipmisensors: Skipping SDR type 0x%x\n", type);
++ }
++ if (ipmi_ver != 0x90) {
++ if (bmc->nextrecord >= 6224) {
++ /*YJ stop sensor scan on poweredge 1750 */
++ bmc->nextrecord = 0xffff;
++ }
++ }
++
++ if (bmc->nextrecord == 0xFFFF) {
++ if (bmc->sdr_count == 0) {
++ printk(KERN_INFO
++ "ipmisensors: No recognized sensors found.\n");
++ bmc->state = STATE_DONE;
++ } else {
++ printk(KERN_INFO "ipmisensors: all sensors detected\n");
++ bmc->state = STATE_SYSTABLE;
++
++ /* Schedule sysfs build/registration work */
++ INIT_WORK(&bmc->sysfs_work, ipmisensors_build_sysfs);
++ queue_work(ipmisensors_workqueue, &bmc->sysfs_work);
++ }
++ } else {
++ ipmisensors_get_sdr(bmc, 0, bmc->nextrecord, 0);
++ bmc->state = STATE_SDR;
++ }
++}
++
++/**
++ * Process incoming messages based on internal state
++ *
++ * @bmc: the bmc the message is from.
++ * @msg: the ipmi message to process.
++ */
++static void ipmisensors_rcv_msg(struct ipmisensors_bmc_data *bmc,
++ struct kernel_ipmi_msg *msg)
++{
++ switch (bmc->state) {
++ case STATE_INIT:
++ case STATE_RESERVE:
++ bmc->resid = (((u16) msg->data[2]) << 8) | msg->data[1];
++
++ printk(KERN_DEBUG "ipmisensors: Got first resid 0x%.4x\n",
++ bmc->resid);
++
++ ipmisensors_get_sdr(bmc, 0, 0, 0);
++ bmc->state = STATE_SDR;
++ break;
++
++ case STATE_SDR:
++ case STATE_SDRPARTIAL:
++ ipmisensors_rcv_sdr_msg(bmc, msg);
++ break;
++
++ case STATE_READING:
++ ipmisensors_rcv_reading_msg(bmc, msg);
++ break;
++
++ case STATE_UNCANCEL:
++ bmc->resid = (((u16) msg->data[2]) << 8) | msg->data[1];
++
++ printk(KERN_DEBUG "ipmisensors: Got new resid 0x%.4x\n",
++ bmc->resid);
++
++ bmc->rx_msg_data_offset = 0;
++ ipmisensors_get_sdr(bmc, 0, bmc->nextrecord, 0);
++ bmc->state = STATE_SDR;
++ break;
++
++ case STATE_DONE:
++ case STATE_SYSTABLE:
++ break;
++ default:
++ bmc->state = STATE_INIT;
++ }
++}
++
++/**
++ * Callback to handle a received IPMI message from a given BMC.
++ *
++ * @msg: the received message.
++ * @handler_data: a pointer to the particular bmc ipmisensors_bmc_data struct.
++ */
++static void ipmisensors_msg_handler(struct ipmi_recv_msg *msg,
++ void *user_msg_data)
++{
++ struct ipmisensors_bmc_data *bmc =
++ (struct ipmisensors_bmc_data *)user_msg_data;
++
++ if (msg->msg.data[0] != 0)
++ printk(KERN_WARNING
++ "ipmisensors: Error 0x%x on cmd 0x%x/0x%x\n",
++ msg->msg.data[0], msg->msg.netfn, msg->msg.cmd);
++
++ if (bmc != NULL && ipmisensors_intf_registered(bmc->interface_id)) {
++ if (bmc->state == STATE_SDR &&
++ msg->msg.data[0] == IPMI_INVALID_RESERVATION_ID) {
++ /* reservation cancelled, get new resid */
++ if (++bmc->errorcount > 275) {
++ printk(KERN_ERR
++ "ipmisensors: Too many reservations cancelled, giving up\n");
++ bmc->state = STATE_DONE;
++ } else {
++ printk(KERN_DEBUG
++ "ipmisensors: resid 0x%04x cancelled, getting new one\n",
++ bmc->resid);
++
++ ipmisensors_reserve_sdr(bmc);
++ bmc->state = STATE_UNCANCEL;
++ }
++ } else if (msg->msg.data[0] != IPMI_CC_NO_ERROR &&
++ msg->msg.data[0] != IPMI_ERR_RETURNING_REQ_BYTES &&
++ msg->msg.data[0] != IPMI_ERR_PROVIDING_RESPONSE) {
++ printk(KERN_ERR
++ "ipmisensors: Error 0x%x on cmd 0x%x/0x%x; state = %d; probably fatal.\n",
++ msg->msg.data[0], msg->msg.netfn & 0xfe,
++ msg->msg.cmd, bmc->state);
++ } else {
++ printk(KERN_DEBUG "ipmisensors: received message\n");
++ ipmisensors_rcv_msg(bmc, &msg->msg);
++ }
++
++ } else {
++ printk(KERN_WARNING
++ "ipmisensors: Response for non-registered BMC\n");
++ if (bmc != NULL)
++ printk(KERN_DEBUG "ipmisensors: BMC ID: %d\n",
++ bmc->interface_id);
++ else
++ printk(KERN_DEBUG "ipmisensors: BMC NULL!\n");
++ }
++
++ ipmi_free_recv_msg(msg);
++}
++
++/****** IPMI Interface Initialization ******/
++
++/**
++ * Return true if the given ipmi interface has been registered.
++ *
++ * @ipmi_intf: The IPMI interface number.
++ */
++static int ipmisensors_intf_registered(int ipmi_intf)
++{
++ int found = 0;
++ struct ipmisensors_bmc_data *cursor, *next;
++
++ /* find and free the ipmisensors_bmc_data struct */
++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++ if (cursor->interface_id == ipmi_intf) {
++ found++;
++ }
++ }
++
++ return found;
++}
++
++/**
++ * Return true if the given BMC has been registered.
++ *
++ * @bmc: The BMC device.
++ */
++static int ipmisensors_bmc_registered(struct device *bmc)
++{
++ int found = 0;
++ struct ipmisensors_bmc_data *cursor, *next;
++
++ /* find and free the ipmisensors_bmc_data struct */
++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++ if (cursor->dev == bmc) {
++ found++;
++ }
++ }
++
++ return found;
++}
++
++/**
++ * Register new IPMI BMC interface. Interface indpendent callback created
++ * for flexibility in adding new types of interface callbacks in future.
++ *
++ * @ipmi_intf: The IPMI interface number.
++ */
++static void ipmisensors_register_bmc(int ipmi_intf, struct ipmi_addr *address)
++{
++ int error;
++
++ /* allocate a new ipmisensors_bmc_data struct */
++
++ struct ipmisensors_bmc_data *bmc = (struct ipmisensors_bmc_data *)
++ kmalloc(sizeof(struct ipmisensors_bmc_data), GFP_KERNEL);
++
++ /* initialize members */
++ INIT_LIST_HEAD(&bmc->sdrs);
++ bmc->interface_id = ipmi_intf;
++
++ bmc->address = *address;
++
++ bmc->sdr_count = 0;
++ bmc->msgid = 0;
++ bmc->ipmi_sdr_partial_size = IPMI_CHUNK_SIZE;
++ bmc->state = STATE_INIT;
++ bmc->errorcount = 0;
++ bmc->rx_msg_data_offset = 0;
++ bmc->dev = ipmi_get_bmcdevice(ipmi_intf);
++
++ /* default to 3 second min update interval */
++ bmc->update_period = 3;
++
++ if (bmc->dev == NULL) {
++ printk(KERN_ERR
++ "ipmisensors: Error, couldn't get BMC device for interface %d\n",
++ bmc->interface_id);
++ kfree(bmc);
++ return;
++ }
++
++ /* Create IPMI messaging interface user */
++ error = ipmi_create_user(bmc->interface_id, &driver_data.ipmi_hndlrs,
++ bmc, &bmc->user);
++ if (error < 0) {
++ printk(KERN_ERR
++ "ipmisensors: Error, unable to register user with ipmi interface %d\n",
++ bmc->interface_id);
++ kfree(bmc);
++ return;
++ }
++
++ /* Register the BMC as a HWMON class device */
++ bmc->class_dev = hwmon_device_register(bmc->dev);
++
++ if (IS_ERR(bmc->class_dev)) {
++ printk(KERN_ERR
++ "ipmisensors: Error, unable to register hwmon class device for interface %d\n",
++ bmc->interface_id);
++ kfree(bmc);
++ return;
++ }
++
++ /* Register the BMC in the driver */
++ if (ipmisensors_bmc_registered(bmc->dev)) {
++ printk(KERN_ERR
++ "ipmisensors: BMC on interface %d already registered\n",
++ bmc->interface_id);
++ hwmon_device_unregister(bmc->class_dev);
++ kfree(bmc);
++ return;
++ }
++
++ ipmi_get_version(bmc->user, &bmc->ipmi_version_major,
++ &bmc->ipmi_version_minor);
++
++ /* finally add the new bmc data to the bmc data list */
++ list_add_tail(&bmc->list, &driver_data.bmc_data);
++ driver_data.interfaces++;
++
++ printk(KERN_INFO
++ "ipmisensors: Registered IPMI %d.%d BMC over interface %d\n",
++ bmc->ipmi_version_major,
++ bmc->ipmi_version_minor, bmc->interface_id);
++
++ /* Send a reserve SDR command to the bmc */
++ ipmisensors_reserve_sdr(bmc);
++
++ /* initialize the bmc's update work struct */
++ INIT_DELAYED_WORK(&bmc->update_work, ipmisensors_update_bmc);
++}
++
++/**
++ * Callback for when an IPMI BMC is gone. Interface indpendent callback created
++ * for flexibility in adding new types of interface callbacks in future.
++ *
++ * @ipmi_intf: The IPMI interface number.
++ */
++static void ipmisensors_unregister_bmc(int ipmi_intf)
++{
++ struct ipmisensors_bmc_data *cursor, *next;
++
++ /* find and free the ipmisensors_bmc_data struct */
++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++ if (cursor->interface_id == ipmi_intf) {
++ list_del(&cursor->list);
++ printk(KERN_DEBUG
++ "ipmisensors: cancelling queued work\n");
++ /* cancel update work queued for this bmc */
++ cancel_delayed_work(&cursor->update_work);
++ printk(KERN_DEBUG
++ "ipmisensors: waiting for update to finish\n");
++ /* wait for readings to finish */
++ while (cursor->state != STATE_DONE) ;
++
++ device_remove_file(cursor->dev,
++ &cursor->alarms_attr.dev_attr);
++ device_remove_file(cursor->dev,
++ &cursor->update_attr.dev_attr);
++ hwmon_device_unregister(cursor->class_dev);
++ ipmisensors_sdr_cleanup(cursor);
++ ipmi_destroy_user(cursor->user);
++
++ printk(KERN_INFO
++ "ipmisensors: Unegistered IPMI interface %d\n",
++ cursor->interface_id);
++
++ kfree(cursor);
++ driver_data.interfaces--;
++ }
++ }
++
++}
++
++/**
++ * Unregister all registered bmcs.
++ */
++static void ipmisensors_unregister_bmc_all(void)
++{
++ struct ipmisensors_bmc_data *cursor, *next;
++
++ /* find and free the ipmisensors_bmc_data struct */
++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++ list_del(&cursor->list);
++
++ /* cancel update work queued for this bmc */
++ printk(KERN_DEBUG "ipmisensors: cancelling queued work\n");
++ cancel_delayed_work(&cursor->update_work);
++
++ printk(KERN_DEBUG
++ "ipmisensors: waiting for update to finish\n");
++ /* wait for readings to finish */
++ while (cursor->state != STATE_DONE) ;
++
++ device_remove_file(cursor->dev, &cursor->alarms_attr.dev_attr);
++ device_remove_file(cursor->dev, &cursor->update_attr.dev_attr);
++ hwmon_device_unregister(cursor->class_dev);
++ ipmisensors_sdr_cleanup(cursor);
++ ipmi_destroy_user(cursor->user);
++
++ printk(KERN_INFO
++ "ipmisensors: Unegistered IPMI interface %d\n",
++ cursor->interface_id);
++
++ kfree(cursor);
++ }
++
++ driver_data.interfaces = 0;
++}
++
++/**
++ * Callback for when a new IPMI SMI type interface is found.
++ *
++ * @if_num: The IPMI interface number.
++ */
++static void ipmisensors_new_smi(int if_num, struct device *dev)
++{
++ struct ipmi_addr smi_address = {
++ IPMI_SYSTEM_INTERFACE_ADDR_TYPE,
++ IPMI_BMC_CHANNEL,
++ {0},
++ };
++
++ /* calls the generic new interface function */
++ ipmisensors_register_bmc(if_num, &smi_address);
++}
++
++/**
++ * Callback for when an exisiting IPMI SMI type interface is gone.
++ *
++ * @if_num: The IPMI interface number.
++ */
++static void ipmisensors_smi_gone(int if_num)
++{
++ if (driver_data.interfaces > 0) {
++ ipmisensors_unregister_bmc(if_num);
++ }
++}
++
++/**
++ * Initialize the module.
++ */
++static int __init ipmisensors_init(void)
++{
++ int error;
++ printk(KERN_INFO "ipmisensors - IPMI BMC sensors interface\n");
++
++ /* init cache managers */
++ driver_data.sdrdata_cache =
++ kmem_cache_create("ipmisensors_sdrdata", sizeof(struct sdrdata), 0,
++ 0, NULL, NULL);
++ driver_data.sysfsattr_cache =
++ kmem_cache_create("ipmisensors_sysfsattr",
++ sizeof(struct ipmisensors_device_attribute), 0, 0,
++ NULL, NULL);
++
++ if (!driver_data.sdrdata_cache || !driver_data.sysfsattr_cache) {
++ if (driver_data.sdrdata_cache)
++ kmem_cache_destroy(driver_data.sdrdata_cache);
++ if (driver_data.sysfsattr_cache)
++ kmem_cache_destroy(driver_data.sysfsattr_cache);
++ return -ENOMEM;
++ }
++
++ /* register IPMI interface callback(s) */
++ error = ipmi_smi_watcher_register(&driver_data.smi_watcher);
++ if (error) {
++ printk(KERN_WARNING
++ "ipmisensors: can't register smi watcher\n");
++ return error;
++ }
++
++ /* create work queue, keep it simple, single-threaded */
++ ipmisensors_workqueue =
++ create_singlethread_workqueue("ipmisensors_workqueue");
++
++ return 0;
++}
++
++/**
++ * Cleanup
++ */
++static void ipmisensors_cleanup(void)
++{
++ /* start cleanup */
++ cleanup = 1;
++
++ /* unregister bmcs */
++ printk(KERN_DEBUG "ipmisensors: unregister bmcs\n");
++ ipmi_smi_watcher_unregister(&driver_data.smi_watcher);
++ ipmisensors_unregister_bmc_all();
++
++ /* flush & destroy work queue */
++ printk(KERN_DEBUG "ipmisensors: destroy workqueue\n");
++ flush_workqueue(ipmisensors_workqueue);
++ destroy_workqueue(ipmisensors_workqueue);
++
++ /* remove cache managers */
++ if (driver_data.sdrdata_cache)
++ kmem_cache_destroy(driver_data.sdrdata_cache);
++ if (driver_data.sysfsattr_cache)
++ kmem_cache_destroy(driver_data.sysfsattr_cache);
++}
++
++/**
++ * Cleanup and exit the module
++ */
++static void __exit ipmisensors_exit(void)
++{
++ ipmisensors_cleanup();
++ printk(KERN_DEBUG "ipmisensors: cleanup finished\n");
++}
++
++MODULE_AUTHOR("Yani Ioannou <yani.ioannou@gmail.com>");
++MODULE_DESCRIPTION("IPMI BMC sensors");
++MODULE_LICENSE("GPL");
++
++module_init(ipmisensors_init);
++module_exit(ipmisensors_exit);
+diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.h linux-2.6.20.3/drivers/hwmon/ipmisensors.h
+--- linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.3/drivers/hwmon/ipmisensors.h 2007-03-14 14:41:23.000000000 +0100
+@@ -0,0 +1,240 @@
++/*
++ * ipmisensors.h - lm_sensors interface to IPMI sensors.
++ *
++ * Copyright (C) 2004-2006 Yani Ioannou <yani.ioannou@gmail.com>
++ *
++ * Adapted from bmcsensors (lm-sensors for linux 2.4)
++ * bmcsensors (C) Mark D. Studebaker <mdsxyz123@yahoo.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/ipmi.h>
++#include <linux/list.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++/* SDR defs */
++#define STYPE_TEMP 0x01
++#define STYPE_VOLT 0x02
++#define STYPE_CURR 0x03
++#define STYPE_FAN 0x04
++
++#define SDR_LIMITS 8
++#define SDR_MAX_ID_LENGTH 16
++#define SDR_MAX_UNPACKED_ID_LENGTH ((SDR_MAX_ID_LENGTH * 4 / 3) + 2)
++
++/* the last sensor type we are interested in */
++#define STYPE_MAX 4
++
++#define IPMI_SDR_SIZE 67
++#define IPMI_CHUNK_SIZE 16
++
++#define MAX_FILENAME_LENGTH 30
++
++struct ipmisensors_device_attribute {
++ struct device_attribute dev_attr;
++ struct sdrdata *sdr;
++};
++#define to_ipmisensors_dev_attr(_dev_attr) \
++ container_of(_dev_attr, struct ipmisensors_device_attribute, dev_attr)
++
++#define IPMISENSORS_DEVICE_ATTR(_name,_mode,_show,_store,_index) \
++struct ipmisensors_attribute sensor_dev_attr_##_name = { \
++ .dev_attr = __ATTR(_name,_mode,_show,_store), \
++ .index = _index, \
++}
++
++struct ipmisensors_bmc_device_attribute {
++ struct device_attribute dev_attr;
++ struct ipmisensors_bmc_data *bmc;
++};
++#define to_ipmisensors_bmc_dev_attr(_dev_attr) \
++ container_of(_dev_attr, struct ipmisensors_bmc_device_attribute, dev_attr)
++
++/**
++ * &struct_sdrdata stores the IPMI Sensor Data Record (SDR) data, as recieved from the BMC, along with the corresponding sysfs attributes
++ */
++struct sdrdata {
++ struct list_head list;
++ /* retrieved from SDR, not expected to change */
++ /* Sensor Type Code */
++ u8 stype;
++ u8 number;
++ /* Sensor Capability Code */
++ u8 capab;
++ u16 thresh_mask;
++ u8 format;
++ u8 linear;
++ s16 m;
++ s16 b;
++ u8 k;
++ u8 nominal;
++ u8 limits[SDR_LIMITS];
++ /* index into limits for reported upper and lower limit */
++ int lim1, lim2;
++ u8 lim1_write, lim2_write;
++ u8 string_type;
++ u8 id_length;
++ u8 id[SDR_MAX_ID_LENGTH];
++ /* retrieved from reading */
++ u8 reading;
++ u8 status;
++ u8 thresholds;
++ /* sensor's bmc */
++ struct ipmisensors_bmc_data *bmc;
++ /* sysfs entries */
++ struct ipmisensors_device_attribute attr;
++ char *attr_name;
++ struct ipmisensors_device_attribute attr_min;
++ char *attr_min_name;
++ struct ipmisensors_device_attribute attr_max;
++ char *attr_max_name;
++ struct ipmisensors_device_attribute attr_label;
++ char *attr_label_name;
++
++};
++
++/**
++ * &struct_ipmisensors_data stores the data for the ipmisensors driver.
++ */
++struct ipmisensors_data {
++ /* Driver struct */
++ char *driver_name;
++
++ /* Linked list of ipmisensors_bmc_data structs, one for each BMC */
++ struct list_head bmc_data;
++
++ /* Number of ipmi interfaces (and hence ipmisensors_data structs). */
++ int interfaces;
++
++ /* IPMI kernel interface - SMI watcher */
++ struct ipmi_smi_watcher smi_watcher;
++
++ /* IPMI kernel interface - user handlers */
++ struct ipmi_user_hndl ipmi_hndlrs;
++
++ /* Cache manager for sdrdata cache */
++ struct kmem_cache *sdrdata_cache;
++
++ /* Cache manager for ipmi_sensor_device_attribute cache */
++ struct kmem_cache *sysfsattr_cache;
++};
++
++/**
++ * &states: enumeration of state codes for a bmc specific ipmisensors
++ */
++enum states {
++ STATE_INIT,
++ STATE_RESERVE,
++ STATE_SDR,
++ STATE_SDRPARTIAL,
++ STATE_READING,
++ STATE_UNCANCEL,
++ STATE_SYSTABLE,
++ STATE_DONE
++};
++
++/**
++ * &struct_ipmisensors_bmc_data stores the data for a particular IPMI BMC.
++ */
++struct ipmisensors_bmc_data {
++ struct list_head list;
++
++ /* The IPMI interface number */
++ int interface_id;
++
++ /* The IPMI address */
++ struct ipmi_addr address;
++
++ /* List of sdrdata structs (sdrs) recieved from the BMC */
++ struct list_head sdrs;
++
++ /* Count of the number of sdrs stored in the sdr list */
++ int sdr_count;
++
++ /* next message id */
++ int msgid;
++
++ /* The ipmi interface 'user' used to access this particular bmc */
++ ipmi_user_t user;
++
++ /* BMC IPMI Version (major) */
++ unsigned char ipmi_version_major;
++
++ /* BMC IPMI Version (minor) */
++ unsigned char ipmi_version_minor;
++
++ /* The size of the SDR request message */
++ int ipmi_sdr_partial_size;
++
++ /* transmit message buffer */
++ struct kernel_ipmi_msg tx_message;
++
++ /* ipmi transmited data buffer */
++ unsigned char tx_msg_data[IPMI_MAX_MSG_LENGTH + 50]; /* why the +50 in bmcsensors? */
++
++ /* ipmi recieved data buffer */
++ unsigned char rx_msg_data[IPMI_MAX_MSG_LENGTH + 50];
++
++ /* current recieve buffer offset */
++ int rx_msg_data_offset;
++
++ /* The id of then next SDR record to read during update cycle */
++ u16 nextrecord;
++
++ /* BMC SDR Reservation ID */
++ u16 resid;
++
++ /* Alarm status */
++ u8 alarms;
++
++ /* The cumalative error count for this bmc */
++ int errorcount;
++
++ /* The current state of this bmc w.r.t. ipmisensors (see enum states) */
++ int state;
++
++ /* The current sdr for which a reading is pending */
++ struct sdrdata *current_sdr;
++
++ /* The BMC's device struct */
++ struct device *dev;
++
++ /* hwmon class device */
++ struct class_device *class_dev;
++
++ /* hwmon device name */
++ struct device_attribute name_attr;
++
++ /* alarms attribute */
++ struct ipmisensors_bmc_device_attribute alarms_attr;
++
++ /* update_period attribute */
++ struct ipmisensors_bmc_device_attribute update_attr;
++
++ /* lower bound on time between updates (in seconds) */
++ unsigned int update_period;
++
++ /* semaphore used to do a headcount of the SDR readings we are waiting
++ * on in a given bmc update */
++ struct semaphore update_semaphore;
++
++ /* bmc's work struct for updating sensors */
++ struct delayed_work update_work;
++
++ /* bmc's work struct for building the sysfs workqueue */
++ struct work_struct sysfs_work;
++};
+diff -rduNp linux-2.6.20.3.orig/include/linux/ipmi.h linux-2.6.20.3/include/linux/ipmi.h
+--- linux-2.6.20.3.orig/include/linux/ipmi.h 2007-03-13 19:27:08.000000000 +0100
++++ linux-2.6.20.3/include/linux/ipmi.h 2007-03-14 14:23:02.000000000 +0100
+@@ -300,6 +300,9 @@ int ipmi_create_user(unsigned int
+ safe, too. */
+ int ipmi_destroy_user(ipmi_user_t user);
+
++/* Get the IPMI BMC's device struct */
++struct device *ipmi_get_bmcdevice(int ipmi_intf);
++
+ /* Get the IPMI version of the BMC we are talking to. */
+ void ipmi_get_version(ipmi_user_t user,
+ unsigned char *major,
+diff -rduNp linux-2.6.20.3.orig/include/linux/ipmi_msgdefs.h linux-2.6.20.3/include/linux/ipmi_msgdefs.h
+--- linux-2.6.20.3.orig/include/linux/ipmi_msgdefs.h 2007-03-13 19:27:08.000000000 +0100
++++ linux-2.6.20.3/include/linux/ipmi_msgdefs.h 2007-03-14 14:23:02.000000000 +0100
+@@ -45,6 +45,7 @@
+
+ #define IPMI_NETFN_APP_REQUEST 0x06
+ #define IPMI_NETFN_APP_RESPONSE 0x07
++#define IPMI_GET_DEVICE_GUID_CMD 0x08
+ #define IPMI_GET_DEVICE_ID_CMD 0x01
+ #define IPMI_COLD_RESET_CMD 0x02
+ #define IPMI_WARM_RESET_CMD 0x03
+@@ -57,6 +58,11 @@
+ #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f
+ #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
+ #define IPMI_GET_CHANNEL_INFO_CMD 0x42
++#define IPMI_RESERVE_SDR 0x22
++#define IPMI_GET_SDR 0x23
++#define IPMI_GET_SENSOR_STATE_READING 0x2D
++#define IPMI_SET_SENSOR_HYSTERESIS 0x24
++#define IPMI_SET_SENSOR_THRESHOLD 0x26
+
+ #define IPMI_NETFN_STORAGE_REQUEST 0x0a
+ #define IPMI_NETFN_STORAGE_RESPONSE 0x0b
+@@ -79,10 +85,13 @@
+ #define IPMI_NODE_BUSY_ERR 0xc0
+ #define IPMI_INVALID_COMMAND_ERR 0xc1
+ #define IPMI_TIMEOUT_ERR 0xc3
++#define IPMI_INVALID_RESERVATION_ID 0xc5
+ #define IPMI_ERR_MSG_TRUNCATED 0xc6
+ #define IPMI_REQ_LEN_INVALID_ERR 0xc7
+ #define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8
+ #define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */
++#define IPMI_ERR_RETURNING_REQ_BYTES 0xca
++#define IPMI_ERR_PROVIDING_RESPONSE 0xce
+ #define IPMI_LOST_ARBITRATION_ERR 0x81
+ #define IPMI_BUS_ERR 0x82
+ #define IPMI_NAK_ON_WRITE_ERR 0x83