summaryrefslogtreecommitdiffstats
path: root/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch
diff options
context:
space:
mode:
Diffstat (limited to 'toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch')
-rw-r--r--toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch17772
1 files changed, 0 insertions, 17772 deletions
diff --git a/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch b/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch
deleted file mode 100644
index a07c9f3f9..000000000
--- a/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch
+++ /dev/null
@@ -1,17772 +0,0 @@
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 277877a..a5bdfa6 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1434,6 +1434,11 @@ L: linux-scsi@vger.kernel.org
- W: http://www.icp-vortex.com/
- S: Supported
-
-+GENERIC GPIO I2C DRIVER
-+P: Haavard Skinnemoen
-+M: hskinnemoen@atmel.com
-+S: Supported
-+
- GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS
- P: Krzysztof Halasa
- M: khc@pm.waw.pl
-diff --git a/Makefile b/Makefile
-index 7980f39..388b666 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 6
- SUBLEVEL = 21
--EXTRAVERSION = .3
-+EXTRAVERSION = .3.atmel.1
- NAME = Nocturnal Monster Puppy
-
- # *DOCUMENTATION*
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index ce4013a..3956118 100644
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -57,9 +57,6 @@ config ARCH_HAS_ILOG2_U64
- bool
- default n
-
--config GENERIC_BUST_SPINLOCK
-- bool
--
- config GENERIC_HWEIGHT
- bool
- default y
-@@ -68,6 +65,11 @@ config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-+config GENERIC_BUG
-+ bool
-+ default y
-+ depends on BUG
-+
- source "init/Kconfig"
-
- menu "System Type and features"
-@@ -106,6 +108,9 @@ choice
- config BOARD_ATSTK1000
- bool "ATSTK1000 evaluation board"
- select BOARD_ATSTK1002 if CPU_AT32AP7000
-+
-+config BOARD_ATNGW100
-+ bool "ATNGW100 Network Gateway"
- endchoice
-
- choice
-@@ -116,6 +121,8 @@ config LOADER_U_BOOT
- bool "U-Boot (or similar) bootloader"
- endchoice
-
-+source "arch/avr32/mach-at32ap/Kconfig"
-+
- config LOAD_ADDRESS
- hex
- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
-@@ -164,6 +171,10 @@ config OWNERSHIP_TRACE
- enabling Nexus-compliant debuggers to keep track of the PID of the
- currently executing task.
-
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
-
- source "kernel/Kconfig.hz"
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index 7b842e9..eb72198 100644
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -16,7 +16,7 @@ AFLAGS += -mrelax -mno-pic
- CFLAGS_MODULE += -mno-relax
- LDFLAGS_vmlinux += --relax
-
--cpuflags-$(CONFIG_CPU_AP7000) += -mcpu=ap7000
-+cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
-
- CFLAGS += $(cpuflags-y)
- AFLAGS += $(cpuflags-y)
-@@ -27,9 +27,11 @@ head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o
- head-y += arch/avr32/kernel/head.o
- core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/
- core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
-+core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
-
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
-new file mode 100644
-index 0000000..c740aa1
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Makefile
-@@ -0,0 +1 @@
-+obj-y += setup.o flash.o
-diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
-new file mode 100644
-index 0000000..f9b32a8
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/flash.c
-@@ -0,0 +1,95 @@
-+/*
-+ * ATNGW100 board-specific flash initialization
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/arch/smc.h>
-+
-+static struct smc_config flash_config __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 40,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 10,
-+
-+ .ncs_read_pulse = 80,
-+ .nrd_pulse = 40,
-+ .ncs_write_pulse = 65,
-+ .nwe_pulse = 55,
-+
-+ .read_cycle = 120,
-+ .write_cycle = 120,
-+
-+ .bus_width = 2,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .byte_write = 1,
-+};
-+
-+static struct mtd_partition flash_parts[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0x00000000,
-+ .size = 0x00020000, /* 128 KiB */
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+ {
-+ .name = "root",
-+ .offset = 0x00020000,
-+ .size = 0x007d0000,
-+ },
-+ {
-+ .name = "env",
-+ .offset = 0x007f0000,
-+ .size = 0x00010000,
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+};
-+
-+static struct physmap_flash_data flash_data = {
-+ .width = 2,
-+ .nr_parts = ARRAY_SIZE(flash_parts),
-+ .parts = flash_parts,
-+};
-+
-+static struct resource flash_resource = {
-+ .start = 0x00000000,
-+ .end = 0x007fffff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device flash_device = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .resource = &flash_resource,
-+ .num_resources = 1,
-+ .dev = {
-+ .platform_data = &flash_data,
-+ },
-+};
-+
-+/* This needs to be called after the SMC has been initialized */
-+static int __init atngw100_flash_init(void)
-+{
-+ int ret;
-+
-+ ret = smc_set_configuration(0, &flash_config);
-+ if (ret < 0) {
-+ printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
-+ return ret;
-+ }
-+
-+ platform_device_register(&flash_device);
-+
-+ return 0;
-+}
-+device_initcall(atngw100_flash_init);
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-new file mode 100644
-index 0000000..3cbdc2d
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -0,0 +1,131 @@
-+/*
-+ * Board-specific setup code for the ATNGW100 Network Gateway
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/linkage.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/io.h>
-+#include <asm/setup.h>
-+
-+#include <asm/arch/at32ap7000.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/init.h>
-+
-+/* Initialized by bootloader-specific startup code. */
-+struct tag *bootloader_tags __initdata;
-+
-+struct eth_addr {
-+ u8 addr[6];
-+};
-+static struct eth_addr __initdata hw_addr[2];
-+static struct eth_platform_data __initdata eth_data[2];
-+
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+ {
-+ .modalias = "mtd_dataflash",
-+ .max_speed_hz = 10000000,
-+ .chip_select = 0,
-+ },
-+};
-+
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_PC(25),
-+ .wp_pin = GPIO_PIN_PE(0),
-+};
-+
-+/*
-+ * The next two functions should go away as the boot loader is
-+ * supposed to initialize the macb address registers with a valid
-+ * ethernet address. But we need to keep it around for a while until
-+ * we can be reasonably sure the boot loader does this.
-+ *
-+ * The phy_id is ignored as the driver will probe for it.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+ int i;
-+
-+ i = tag->u.ethernet.mac_index;
-+ if (i < ARRAY_SIZE(hw_addr))
-+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-+ sizeof(hw_addr[i].addr));
-+
-+ return 0;
-+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-+
-+static void __init set_hw_addr(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const u8 *addr;
-+ void __iomem *regs;
-+ struct clk *pclk;
-+
-+ if (!res)
-+ return;
-+ if (pdev->id >= ARRAY_SIZE(hw_addr))
-+ return;
-+
-+ addr = hw_addr[pdev->id].addr;
-+ if (!is_valid_ether_addr(addr))
-+ return;
-+
-+ /*
-+ * Since this is board-specific code, we'll cheat and use the
-+ * physical address directly as we happen to know that it's
-+ * the same as the virtual address.
-+ */
-+ regs = (void __iomem __force *)res->start;
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk)
-+ return;
-+
-+ clk_enable(pclk);
-+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
-+ | (addr[1] << 8) | addr[0], regs + 0x98);
-+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+}
-+
-+struct platform_device *at32_usart_map[1];
-+unsigned int at32_nr_usarts = 1;
-+
-+void __init setup_board(void)
-+{
-+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
-+ at32_setup_serial_console(0);
-+}
-+
-+static int __init atngw100_init(void)
-+{
-+ /*
-+ * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
-+ * reserve any pins for it.
-+ */
-+
-+ at32_add_system_devices();
-+
-+ at32_add_device_usart(0);
-+
-+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-+
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_usba(0);
-+
-+ return 0;
-+}
-+postcore_initcall(atngw100_init);
-diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
-new file mode 100644
-index 0000000..9a49ed0
---- /dev/null
-+++ b/arch/avr32/boards/atstk1000/atstk1000.h
-@@ -0,0 +1,15 @@
-+/*
-+ * ATSTK1000 setup code: Daughterboard interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-+#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-+
-+extern struct atmel_lcdfb_info atstk1000_lcdc_data;
-+
-+#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index 5974768..84c22b2 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -14,7 +14,12 @@
- #include <linux/platform_device.h>
- #include <linux/string.h>
- #include <linux/types.h>
-+
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/io.h>
- #include <asm/setup.h>
-@@ -23,6 +28,7 @@
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
-
-+#include "atstk1000.h"
-
- #define SW2_DEFAULT /* MMCI and UART_A available */
-
-@@ -31,19 +37,82 @@ struct eth_addr {
- };
-
- static struct eth_addr __initdata hw_addr[2];
--
- static struct eth_platform_data __initdata eth_data[2];
--extern struct lcdc_platform_data atstk1000_fb0_data;
-+
-+static struct at73c213_board_info at73c213_data = {
-+ .dac_clk = "gclk0",
-+ .i2s_dev = 0,
-+ .shortname = "AVR32 STK1000 external DAC",
-+};
-+
-+static struct cf_platform_data __initdata cf0_data = {
-+ .detect_pin = GPIO_PIN_PB(15),
-+ .reset_pin = GPIO_PIN_PB(30),
-+};
-
- static struct spi_board_info spi0_board_info[] __initdata = {
- {
-+ /* AT73C213 */
-+ .modalias = "at73c213",
-+ .max_speed_hz = 200000,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
-+ },
-+ {
- /* QVGA display */
- .modalias = "ltv350qv",
- .max_speed_hz = 16000000,
- .chip_select = 1,
-+ .mode = SPI_MODE_3,
- },
- };
-
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
-+
-+/* The next two structs and functions are for adding gpio_mouse
-+ * support to the board
-+ */
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
-+ .up = GPIO_PIN_PB(2),
-+ .down = GPIO_PIN_PB(1),
-+ .left = GPIO_PIN_PB(3),
-+ .right = GPIO_PIN_PB(0),
-+ .bleft = GPIO_PIN_PB(7),
-+ .bmiddle = GPIO_PIN_PB(6),
-+ .bright = GPIO_PIN_PB(5),
-+ .scan_ms = 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+ .name = "gpio_mouse",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_mouse0_data,
-+ },
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+ struct platform_device *pdev = &gpio_mouse0_device;
-+ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+ at32_select_gpio(data->up, 0);
-+ at32_select_gpio(data->down, 0);
-+ at32_select_gpio(data->left, 0);
-+ at32_select_gpio(data->right, 0);
-+
-+ at32_select_gpio(data->bleft, 0);
-+ at32_select_gpio(data->bmiddle, 0);
-+ at32_select_gpio(data->bright, 0);
-+
-+ platform_device_register(pdev);
-+}
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -99,6 +168,29 @@ static void __init set_hw_addr(struct platform_device *pdev)
- clk_put(pclk);
- }
-
-+static void __init set_at73c213_init_gclk(struct at73c213_board_info *info)
-+{
-+ struct clk *gclk = clk_get(NULL, info->dac_clk);
-+ struct clk *pll = clk_get(NULL, "pll0");
-+
-+ if (!IS_ERR(gclk) && !IS_ERR(pll)) {
-+ if(clk_set_parent(gclk, pll) != 0)
-+ goto cleanup;
-+ } else {
-+ goto cleanup;
-+ }
-+
-+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ return;
-+
-+cleanup:
-+ if(!IS_ERR(gclk))
-+ clk_put(gclk);
-+ if(!IS_ERR(pll))
-+ clk_put(pll);
-+ return;
-+}
-+
- void __init setup_board(void)
- {
- #ifdef SW2_DEFAULT
-@@ -148,7 +240,18 @@ static int __init atstk1002_init(void)
- set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-
- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-- at32_add_device_lcdc(0, &atstk1000_fb0_data);
-+ at32_add_device_twi(0);
-+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-+ fbmem_start, fbmem_size);
-+ at32_add_device_usba(0);
-+ at32_add_device_ssc(0, ATMEL_SSC_TX);
-+ at32_add_device_abdac(0);
-+ at32_add_device_cf(0, 3, &cf0_data);
-+
-+ set_at73c213_init_gclk(&at73c213_data);
-+
-+ add_device_gpio_mouse0();
-
- return 0;
- }
-diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
-index 272c011..c9af409 100644
---- a/arch/avr32/boards/atstk1000/setup.c
-+++ b/arch/avr32/boards/atstk1000/setup.c
-@@ -8,43 +8,56 @@
- * published by the Free Software Foundation.
- */
- #include <linux/bootmem.h>
-+#include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/types.h>
- #include <linux/linkage.h>
-
--#include <asm/setup.h>
-+#include <video/atmel_lcdc.h>
-
-+#include <asm/setup.h>
- #include <asm/arch/board.h>
-
-+#include "atstk1000.h"
-+
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
-
--struct lcdc_platform_data __initdata atstk1000_fb0_data;
--
--void __init board_setup_fbmem(unsigned long fbmem_start,
-- unsigned long fbmem_size)
--{
-- if (!fbmem_size)
-- return;
--
-- if (!fbmem_start) {
-- void *fbmem;
--
-- fbmem = alloc_bootmem_low_pages(fbmem_size);
-- fbmem_start = __pa(fbmem);
-- } else {
-- pg_data_t *pgdat;
--
-- for_each_online_pgdat(pgdat) {
-- if (fbmem_start >= pgdat->bdata->node_boot_start
-- && fbmem_start <= pgdat->bdata->node_low_pfn)
-- reserve_bootmem_node(pgdat, fbmem_start,
-- fbmem_size);
-- }
-- }
--
-- printk("%luKiB framebuffer memory at address 0x%08lx\n",
-- fbmem_size >> 10, fbmem_start);
-- atstk1000_fb0_data.fbmem_start = fbmem_start;
-- atstk1000_fb0_data.fbmem_size = fbmem_size;
--}
-+static struct fb_videomode __initdata ltv350qv_modes[] = {
-+ {
-+ .name = "320x240 @ 75",
-+ .refresh = 75,
-+ .xres = 320, .yres = 240,
-+ .pixclock = KHZ2PICOS(6891),
-+
-+ .left_margin = 17, .right_margin = 33,
-+ .upper_margin = 10, .lower_margin = 10,
-+ .hsync_len = 16, .vsync_len = 1,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs __initdata atstk1000_default_monspecs = {
-+ .manufacturer = "SNG",
-+ .monitor = "LTV350QV",
-+ .modedb = ltv350qv_modes,
-+ .modedb_len = ARRAY_SIZE(ltv350qv_modes),
-+ .hfmin = 14820,
-+ .hfmax = 22230,
-+ .vfmin = 60,
-+ .vfmax = 90,
-+ .dclkmax = 30000000,
-+};
-+
-+struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
-+ .default_bpp = 24,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_INVCLK
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &atstk1000_default_monspecs,
-+ .guard_time = 2,
-+};
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-new file mode 100644
-index 0000000..c254ffc
---- /dev/null
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -0,0 +1,1085 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.21-rc6
-+# Thu Apr 12 16:35:07 2007
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# System Type and features
-+#
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP7000=y
-+# CONFIG_BOARD_ATSTK1000 is not set
-+CONFIG_BOARD_ATNGW100=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP7000_32_BIT_SMC is not set
-+CONFIG_AP7000_16_BIT_SMC=y
-+# CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+# CONFIG_OWNERSHIP_TRACE is not set
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_CMDLINE=""
-+
-+#
-+# Bus options
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_PIMSM_V1=y
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+CONFIG_INET_IPCOMP=y
-+CONFIG_INET_XFRM_TUNNEL=y
-+CONFIG_INET_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+
-+#
-+# IP: Virtual Server Configuration
-+#
-+# CONFIG_IP_VS is not set
-+CONFIG_IPV6=y
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+CONFIG_INET6_AH=y
-+CONFIG_INET6_ESP=y
-+CONFIG_INET6_IPCOMP=y
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=y
-+CONFIG_INET6_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET6_XFRM_MODE_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_BEET=y
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=y
-+# CONFIG_IPV6_TUNNEL is not set
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+# CONFIG_NETFILTER_NETLINK is not set
-+CONFIG_NF_CONNTRACK_ENABLED=m
-+CONFIG_NF_CONNTRACK_SUPPORT=y
-+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-+CONFIG_NF_CONNTRACK=m
-+CONFIG_NF_CT_ACCT=y
-+CONFIG_NF_CONNTRACK_MARK=y
-+# CONFIG_NF_CONNTRACK_EVENTS is not set
-+CONFIG_NF_CT_PROTO_GRE=m
-+# CONFIG_NF_CT_PROTO_SCTP is not set
-+CONFIG_NF_CONNTRACK_AMANDA=m
-+CONFIG_NF_CONNTRACK_FTP=m
-+CONFIG_NF_CONNTRACK_H323=m
-+CONFIG_NF_CONNTRACK_IRC=m
-+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-+CONFIG_NF_CONNTRACK_PPTP=m
-+CONFIG_NF_CONNTRACK_SANE=m
-+CONFIG_NF_CONNTRACK_SIP=m
-+CONFIG_NF_CONNTRACK_TFTP=m
-+CONFIG_NETFILTER_XTABLES=y
-+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-+CONFIG_NETFILTER_XT_TARGET_MARK=m
-+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-+CONFIG_NETFILTER_XT_MATCH_ESP=m
-+CONFIG_NETFILTER_XT_MATCH_HELPER=m
-+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-+CONFIG_NETFILTER_XT_MATCH_MAC=m
-+CONFIG_NETFILTER_XT_MATCH_MARK=m
-+CONFIG_NETFILTER_XT_MATCH_POLICY=m
-+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-+CONFIG_NETFILTER_XT_MATCH_REALM=m
-+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-+CONFIG_NETFILTER_XT_MATCH_STRING=m
-+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV4=m
-+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-+# CONFIG_IP_NF_QUEUE is not set
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_MATCH_IPRANGE=m
-+CONFIG_IP_NF_MATCH_TOS=m
-+CONFIG_IP_NF_MATCH_RECENT=m
-+CONFIG_IP_NF_MATCH_ECN=m
-+CONFIG_IP_NF_MATCH_AH=m
-+CONFIG_IP_NF_MATCH_TTL=m
-+CONFIG_IP_NF_MATCH_OWNER=m
-+CONFIG_IP_NF_MATCH_ADDRTYPE=m
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+CONFIG_IP_NF_TARGET_LOG=m
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+CONFIG_NF_NAT=m
-+CONFIG_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_IP_NF_TARGET_REDIRECT=m
-+CONFIG_IP_NF_TARGET_NETMAP=m
-+CONFIG_IP_NF_TARGET_SAME=m
-+CONFIG_NF_NAT_SNMP_BASIC=m
-+CONFIG_NF_NAT_PROTO_GRE=m
-+CONFIG_NF_NAT_FTP=m
-+CONFIG_NF_NAT_IRC=m
-+CONFIG_NF_NAT_TFTP=m
-+CONFIG_NF_NAT_AMANDA=m
-+CONFIG_NF_NAT_PPTP=m
-+CONFIG_NF_NAT_H323=m
-+CONFIG_NF_NAT_SIP=m
-+CONFIG_IP_NF_MANGLE=m
-+CONFIG_IP_NF_TARGET_TOS=m
-+CONFIG_IP_NF_TARGET_ECN=m
-+CONFIG_IP_NF_TARGET_TTL=m
-+CONFIG_IP_NF_TARGET_CLUSTERIP=m
-+CONFIG_IP_NF_RAW=m
-+CONFIG_IP_NF_ARPTABLES=m
-+CONFIG_IP_NF_ARPFILTER=m
-+CONFIG_IP_NF_ARP_MANGLE=m
-+
-+#
-+# IPv6: Netfilter Configuration (EXPERIMENTAL)
-+#
-+CONFIG_NF_CONNTRACK_IPV6=m
-+CONFIG_IP6_NF_QUEUE=m
-+CONFIG_IP6_NF_IPTABLES=m
-+CONFIG_IP6_NF_MATCH_RT=m
-+CONFIG_IP6_NF_MATCH_OPTS=m
-+CONFIG_IP6_NF_MATCH_FRAG=m
-+CONFIG_IP6_NF_MATCH_HL=m
-+CONFIG_IP6_NF_MATCH_OWNER=m
-+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-+CONFIG_IP6_NF_MATCH_AH=m
-+CONFIG_IP6_NF_MATCH_MH=m
-+CONFIG_IP6_NF_MATCH_EUI64=m
-+CONFIG_IP6_NF_FILTER=m
-+CONFIG_IP6_NF_TARGET_LOG=m
-+CONFIG_IP6_NF_TARGET_REJECT=m
-+CONFIG_IP6_NF_MANGLE=m
-+CONFIG_IP6_NF_TARGET_HL=m
-+CONFIG_IP6_NF_RAW=m
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+CONFIG_VLAN_8021Q=m
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+CONFIG_NET_CLS_ROUTE=y
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x80000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+# CONFIG_MTD_NAND is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# Misc devices
-+#
-+
-+#
-+# ATA/ATAPI/MFM/RLL support
-+#
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_NETLINK is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+CONFIG_PPP_MPPE=m
-+CONFIG_PPPOE=m
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+# CONFIG_INPUT is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# USB support
-+#
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# InfiniBand support
-+#
-+
-+#
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+#
-+
-+#
-+# Real Time Clock
-+#
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# Auxiliary Display support
-+#
-+
-+#
-+# Virtualization
-+#
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_DNOTIFY is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=850
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_FORCED_INLINING is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_KPROBES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_DEFLATE=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_TEXTSEARCH=y
-+CONFIG_TEXTSEARCH_KMP=m
-+CONFIG_TEXTSEARCH_BM=m
-+CONFIG_TEXTSEARCH_FSM=m
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
-new file mode 100644
-index 0000000..b429b75
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
-new file mode 100644
-index 0000000..9c1d27a
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
-+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
-+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
-+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
-+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
-+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
-+
-+ return block;
-+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
-+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
-+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
-+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
-+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
-+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+ chan->nr_blocks = req->periods;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
-+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ set_channel_bit(dmac, CH_EN, channel);
-+
-+ return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
-+
-+ return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+ while (status) {
-+ struct dma_request *req;
-+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
-+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
-+
-+ spin_lock(&dmac->lock);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+ }
-+
-+ spin_unlock(&dmac->lock);
-+ return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
-+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
-+ }
-+ clk_enable(dmac->hclk);
-+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
-+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ SA_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
-+
-+ register_dma_controller(&dmac->dma);
-+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+ return 0;
-+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
-+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
-new file mode 100644
-index 0000000..1f67921
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
-+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
-+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
-+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
-+
-+#define DW_DMAC_STATUS_INT 0x360
-+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..b6afc0c 100644
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stubs.o irq.o
- obj-y += setup.o traps.o semaphore.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
-
-diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
-index 2e72fd2..2714cf6 100644
---- a/arch/avr32/kernel/cpu.c
-+++ b/arch/avr32/kernel/cpu.c
-@@ -209,16 +209,17 @@ static const char *mmu_types[] = {
- void __init setup_processor(void)
- {
- unsigned long config0, config1;
-+ unsigned long features;
- unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
- unsigned tmp;
-
-- config0 = sysreg_read(CONFIG0); /* 0x0000013e; */
-- config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */
-- cpu_id = config0 >> 24;
-- cpu_rev = (config0 >> 16) & 0xff;
-- arch_id = (config0 >> 13) & 0x07;
-- arch_rev = (config0 >> 10) & 0x07;
-- mmu_type = (config0 >> 7) & 0x03;
-+ config0 = sysreg_read(CONFIG0);
-+ config1 = sysreg_read(CONFIG1);
-+ cpu_id = SYSREG_BFEXT(PROCESSORID, config0);
-+ cpu_rev = SYSREG_BFEXT(PROCESSORREVISION, config0);
-+ arch_id = SYSREG_BFEXT(AT, config0);
-+ arch_rev = SYSREG_BFEXT(AR, config0);
-+ mmu_type = SYSREG_BFEXT(MMUT, config0);
-
- boot_cpu_data.arch_type = arch_id;
- boot_cpu_data.cpu_type = cpu_id;
-@@ -226,16 +227,16 @@ void __init setup_processor(void)
- boot_cpu_data.cpu_revision = cpu_rev;
- boot_cpu_data.tlb_config = mmu_type;
-
-- tmp = (config1 >> 13) & 0x07;
-+ tmp = SYSREG_BFEXT(ILSZ, config1);
- if (tmp) {
-- boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07);
-- boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f);
-+ boot_cpu_data.icache.ways = 1 << SYSREG_BFEXT(IASS, config1);
-+ boot_cpu_data.icache.sets = 1 << SYSREG_BFEXT(ISET, config1);
- boot_cpu_data.icache.linesz = 1 << (tmp + 1);
- }
-- tmp = (config1 >> 3) & 0x07;
-+ tmp = SYSREG_BFEXT(DLSZ, config1);
- if (tmp) {
-- boot_cpu_data.dcache.ways = 1 << (config1 & 0x07);
-- boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f);
-+ boot_cpu_data.dcache.ways = 1 << SYSREG_BFEXT(DASS, config1);
-+ boot_cpu_data.dcache.sets = 1 << SYSREG_BFEXT(DSET, config1);
- boot_cpu_data.dcache.linesz = 1 << (tmp + 1);
- }
-
-@@ -250,16 +251,39 @@ void __init setup_processor(void)
- cpu_names[cpu_id], cpu_id, cpu_rev,
- arch_names[arch_id], arch_rev);
- printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
-+
- printk ("CPU: features:");
-- if (config0 & (1 << 6))
-- printk(" fpu");
-- if (config0 & (1 << 5))
-- printk(" java");
-- if (config0 & (1 << 4))
-- printk(" perfctr");
-- if (config0 & (1 << 3))
-+ features = 0;
-+ if (config0 & SYSREG_BIT(CONFIG0_R)) {
-+ features |= AVR32_FEATURE_RMW;
-+ printk(" rmw");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_D)) {
-+ features |= AVR32_FEATURE_DSP;
-+ printk(" dsp");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_S)) {
-+ features |= AVR32_FEATURE_SIMD;
-+ printk(" simd");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_O)) {
-+ features |= AVR32_FEATURE_OCD;
- printk(" ocd");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_P)) {
-+ features |= AVR32_FEATURE_PCTR;
-+ printk(" perfctr");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_J)) {
-+ features |= AVR32_FEATURE_JAVA;
-+ printk(" java");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_F)) {
-+ features |= AVR32_FEATURE_FPU;
-+ printk(" fpu");
-+ }
- printk("\n");
-+ boot_cpu_data.features = features;
- }
-
- #ifdef CONFIG_PROC_FS
-diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
-new file mode 100644
-index 0000000..fb654b3
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+ static int next_id;
-+
-+ dmac->id = next_id++;
-+ list_add_tail(&dmac->list, &controllers);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+ struct dma_controller *dmac;
-+
-+ list_for_each_entry(dmac, &controllers, list)
-+ if (dmac->id == id)
-+ return dmac;
-+ return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
-index eeb6679..42657f1 100644
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -100,55 +100,49 @@ dtlb_miss_write:
-
- .global tlb_miss_common
- tlb_miss_common:
-- mfsr r0, SYSREG_PTBR
-- mfsr r1, SYSREG_TLBEAR
-+ mfsr r0, SYSREG_TLBEAR
-+ mfsr r1, SYSREG_PTBR
-
- /* Is it the vmalloc space? */
-- bld r1, 31
-+ bld r0, 31
- brcs handle_vmalloc_miss
-
- /* First level lookup */
- pgtbl_lookup:
-- lsr r2, r1, PGDIR_SHIFT
-- ld.w r0, r0[r2 << 2]
-- bld r0, _PAGE_BIT_PRESENT
-+ lsr r2, r0, PGDIR_SHIFT
-+ ld.w r3, r1[r2 << 2]
-+ bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
-+ bld r3, _PAGE_BIT_PRESENT
- brcc page_table_not_present
-
-- /* TODO: Check access rights on page table if necessary */
--
- /* Translate to virtual address in P1. */
-- andl r0, 0xf000
-- sbr r0, 31
-+ andl r3, 0xf000
-+ sbr r3, 31
-
- /* Second level lookup */
-- lsl r1, (32 - PGDIR_SHIFT)
-- lsr r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
-- add r2, r0, r1 << 2
-- ld.w r1, r2[0]
-- bld r1, _PAGE_BIT_PRESENT
-+ ld.w r2, r3[r1 << 2]
-+ mfsr r0, SYSREG_TLBARLO
-+ bld r2, _PAGE_BIT_PRESENT
- brcc page_not_present
-
- /* Mark the page as accessed */
-- sbr r1, _PAGE_BIT_ACCESSED
-- st.w r2[0], r1
-+ sbr r2, _PAGE_BIT_ACCESSED
-+ st.w r3[r1 << 2], r2
-
- /* Drop software flags */
-- andl r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
-- mtsr SYSREG_TLBELO, r1
-+ andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
-+ mtsr SYSREG_TLBELO, r2
-
- /* Figure out which entry we want to replace */
-- mfsr r0, SYSREG_TLBARLO
-+ mfsr r1, SYSREG_MMUCR
- clz r2, r0
- brcc 1f
-- mov r1, -1 /* All entries have been accessed, */
-- mtsr SYSREG_TLBARLO, r1 /* so reset TLBAR */
-- mov r2, 0 /* and start at 0 */
--1: mfsr r1, SYSREG_MMUCR
-- lsl r2, 14
-- andl r1, 0x3fff, COH
-- or r1, r2
-- mtsr SYSREG_MMUCR, r1
-+ mov r3, -1 /* All entries have been accessed, */
-+ mov r2, 0 /* so start at 0 */
-+ mtsr SYSREG_TLBARLO, r3 /* and reset TLBAR */
-
-+1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
-+ mtsr SYSREG_MMUCR, r1
- tlbw
-
- tlbmiss_restore
-@@ -156,8 +150,8 @@ pgtbl_lookup:
-
- handle_vmalloc_miss:
- /* Simply do the lookup in init's page table */
-- mov r0, lo(swapper_pg_dir)
-- orh r0, hi(swapper_pg_dir)
-+ mov r1, lo(swapper_pg_dir)
-+ orh r1, hi(swapper_pg_dir)
- rjmp pgtbl_lookup
-
-
-@@ -340,12 +334,34 @@ do_bus_error_read:
- do_nmi_ll:
- sub sp, 4
- stmts --sp, r0-lr
-- /* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */
-- rcall save_full_context_ex
-+ mfsr r9, SYSREG_RSR_NMI
-+ mfsr r8, SYSREG_RAR_NMI
-+ bfextu r0, r9, MODE_SHIFT, 3
-+ brne 2f
-+
-+1: pushm r8, r9 /* PC and SR */
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_nmi
-- rjmp bad_return
-+ popm r8-r9
-+ mtsr SYSREG_RAR_NMI, r8
-+ tst r0, r0
-+ mtsr SYSREG_RSR_NMI, r9
-+ brne 3f
-+
-+ ldmts sp++, r0-lr
-+ sub sp, -4 /* skip r12_orig */
-+ rete
-+
-+2: sub r10, sp, -(FRAME_SIZE_FULL - REG_LR)
-+ stdsp sp[4], r10 /* replace saved SP */
-+ rjmp 1b
-+
-+3: popm lr
-+ sub sp, -4 /* skip sp */
-+ popm r0-r12
-+ sub sp, -4 /* skip r12_orig */
-+ rete
-
- handle_address_fault:
- sub sp, 4
-@@ -630,9 +646,12 @@ irq_level\level:
- rcall do_IRQ
-
- lddsp r4, sp[REG_SR]
-- andh r4, (MODE_MASK >> 16), COH
-+ bfextu r4, r4, SYSREG_M0_OFFSET, 3
-+ cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
-+ breq 2f
-+ cp.w r4, MODE_USER >> SYSREG_M0_OFFSET
- #ifdef CONFIG_PREEMPT
-- brne 2f
-+ brne 3f
- #else
- brne 1f
- #endif
-@@ -649,9 +668,18 @@ irq_level\level:
- sub sp, -4 /* ignore r12_orig */
- rete
-
-+2: get_thread_info r0
-+ ld.w r1, r0[TI_flags]
-+ bld r1, TIF_CPU_GOING_TO_SLEEP
- #ifdef CONFIG_PREEMPT
--2:
-- get_thread_info r0
-+ brcc 3f
-+#else
-+ brcc 1b
-+#endif
-+ sub r1, pc, . - cpu_idle_skip_sleep
-+ stdsp sp[REG_PC], r1
-+#ifdef CONFIG_PREEMPT
-+3: get_thread_info r0
- ld.w r2, r0[TI_preempt_count]
- cp.w r2, 0
- brne 1b
-@@ -662,12 +690,32 @@ irq_level\level:
- bld r4, SYSREG_GM_OFFSET
- brcs 1b
- rcall preempt_schedule_irq
-- rjmp 1b
- #endif
-+ rjmp 1b
- .endm
-
- .section .irq.text,"ax",@progbits
-
-+.global cpu_idle_sleep
-+cpu_idle_sleep:
-+ mask_interrupts
-+ get_thread_info r8
-+ ld.w r9, r8[TI_flags]
-+ bld r9, TIF_NEED_RESCHED
-+ brcs cpu_idle_enable_int_and_exit
-+ sbr r9, TIF_CPU_GOING_TO_SLEEP
-+ st.w r8[TI_flags], r9
-+ unmask_interrupts
-+ sleep 0
-+cpu_idle_skip_sleep:
-+ mask_interrupts
-+ ld.w r9, r8[TI_flags]
-+ cbr r9, TIF_CPU_GOING_TO_SLEEP
-+ st.w r8[TI_flags], r9
-+cpu_idle_enable_int_and_exit:
-+ unmask_interrupts
-+ retal r12
-+
- .global irq_level0
- .global irq_level1
- .global irq_level2
-diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
-index fd31124..61f2de2 100644
---- a/arch/avr32/kernel/irq.c
-+++ b/arch/avr32/kernel/irq.c
-@@ -7,15 +7,6 @@
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-- *
-- * This file contains the code used by various IRQ handling routines:
-- * asking for different IRQ's should be done through these routines
-- * instead of just grabbing them. Thus setups with different IRQ numbers
-- * shouldn't result in any weird surprises, and installing new handlers
-- * should be easier.
-- *
-- * IRQ's are in fact implemented a bit like signal handlers for the kernel.
-- * Naturally it's not a 1:1 relation, but there are similarities.
- */
-
- #include <linux/interrupt.h>
-diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c
-index d0abbca..037d7bd 100644
---- a/arch/avr32/kernel/kprobes.c
-+++ b/arch/avr32/kernel/kprobes.c
-@@ -179,7 +179,7 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
- return 1;
- }
-
--static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
- {
- struct kprobe *cur = kprobe_running();
-
-@@ -216,11 +216,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
- if (post_kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- break;
-- case DIE_FAULT:
-- if (kprobe_running()
-- && kprobe_fault_handler(args->regs, args->trapnr))
-- ret = NOTIFY_STOP;
-- break;
- default:
- break;
- }
-diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
-index b599eae..1167fe9 100644
---- a/arch/avr32/kernel/module.c
-+++ b/arch/avr32/kernel/module.c
-@@ -12,10 +12,11 @@
- * published by the Free Software Foundation.
- */
-
--#include <linux/moduleloader.h>
--#include <linux/module.h>
--#include <linux/kernel.h>
-+#include <linux/bug.h>
- #include <linux/elf.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleloader.h>
- #include <linux/vmalloc.h>
-
- void *module_alloc(unsigned long size)
-@@ -315,10 +316,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- vfree(module->arch.syminfo);
- module->arch.syminfo = NULL;
-
-- return 0;
-+ return module_bug_finalize(hdr, sechdrs, module);
- }
-
- void module_arch_cleanup(struct module *module)
- {
--
-+ module_bug_cleanup(module);
- }
-diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
-index 0b43259..4e4181e 100644
---- a/arch/avr32/kernel/process.c
-+++ b/arch/avr32/kernel/process.c
-@@ -11,6 +11,7 @@
- #include <linux/fs.h>
- #include <linux/ptrace.h>
- #include <linux/reboot.h>
-+#include <linux/uaccess.h>
- #include <linux/unistd.h>
-
- #include <asm/sysreg.h>
-@@ -19,6 +20,8 @@
- void (*pm_power_off)(void) = NULL;
- EXPORT_SYMBOL(pm_power_off);
-
-+extern void cpu_idle_sleep(void);
-+
- /*
- * This file handles the architecture-dependent parts of process handling..
- */
-@@ -27,9 +30,8 @@ void cpu_idle(void)
- {
- /* endless idle loop with no priority at all */
- while (1) {
-- /* TODO: Enter sleep mode */
- while (!need_resched())
-- cpu_relax();
-+ cpu_idle_sleep();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
-@@ -114,39 +116,178 @@ void release_thread(struct task_struct *dead_task)
- /* do nothing */
- }
-
-+static void dump_mem(const char *str, const char *log_lvl,
-+ unsigned long bottom, unsigned long top)
-+{
-+ unsigned long p;
-+ int i;
-+
-+ printk("%s%s(0x%08lx to 0x%08lx)\n", log_lvl, str, bottom, top);
-+
-+ for (p = bottom & ~31; p < top; ) {
-+ printk("%s%04lx: ", log_lvl, p & 0xffff);
-+
-+ for (i = 0; i < 8; i++, p += 4) {
-+ unsigned int val;
-+
-+ if (p < bottom || p >= top)
-+ printk(" ");
-+ else {
-+ if (__get_user(val, (unsigned int __user *)p)) {
-+ printk("\n");
-+ goto out;
-+ }
-+ printk("%08x ", val);
-+ }
-+ }
-+ printk("\n");
-+ }
-+
-+out:
-+ return;
-+}
-+
-+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
-+{
-+ return (p > (unsigned long)tinfo)
-+ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
-+}
-+
-+#ifdef CONFIG_FRAME_POINTER
-+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
-+ struct pt_regs *regs, const char *log_lvl)
-+{
-+ unsigned long lr, fp;
-+ struct thread_info *tinfo;
-+
-+ if (regs)
-+ fp = regs->r7;
-+ else if (tsk == current)
-+ asm("mov %0, r7" : "=r"(fp));
-+ else
-+ fp = tsk->thread.cpu_context.r7;
-+
-+ /*
-+ * Walk the stack as long as the frame pointer (a) is within
-+ * the kernel stack of the task, and (b) it doesn't move
-+ * downwards.
-+ */
-+ tinfo = task_thread_info(tsk);
-+ printk("%sCall trace:\n", log_lvl);
-+ while (valid_stack_ptr(tinfo, fp)) {
-+ unsigned long new_fp;
-+
-+ lr = *(unsigned long *)fp;
-+#ifdef CONFIG_KALLSYMS
-+ printk("%s [<%08lx>] ", log_lvl, lr);
-+#else
-+ printk(" [<%08lx>] ", lr);
-+#endif
-+ print_symbol("%s\n", lr);
-+
-+ new_fp = *(unsigned long *)(fp + 4);
-+ if (new_fp <= fp)
-+ break;
-+ fp = new_fp;
-+ }
-+ printk("\n");
-+}
-+#else
-+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
-+ struct pt_regs *regs, const char *log_lvl)
-+{
-+ unsigned long addr;
-+
-+ printk("%sCall trace:\n", log_lvl);
-+
-+ while (!kstack_end(sp)) {
-+ addr = *sp++;
-+ if (kernel_text_address(addr)) {
-+#ifdef CONFIG_KALLSYMS
-+ printk("%s [<%08lx>] ", log_lvl, addr);
-+#else
-+ printk(" [<%08lx>] ", addr);
-+#endif
-+ print_symbol("%s\n", addr);
-+ }
-+ }
-+ printk("\n");
-+}
-+#endif
-+
-+void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-+ struct pt_regs *regs, const char *log_lvl)
-+{
-+ struct thread_info *tinfo;
-+
-+ if (sp == 0) {
-+ if (tsk)
-+ sp = tsk->thread.cpu_context.ksp;
-+ else
-+ sp = (unsigned long)&tinfo;
-+ }
-+ if (!tsk)
-+ tsk = current;
-+
-+ tinfo = task_thread_info(tsk);
-+
-+ if (valid_stack_ptr(tinfo, sp)) {
-+ dump_mem("Stack: ", log_lvl, sp,
-+ THREAD_SIZE + (unsigned long)tinfo);
-+ show_trace_log_lvl(tsk, (unsigned long *)sp, regs, log_lvl);
-+ }
-+}
-+
-+void show_stack(struct task_struct *tsk, unsigned long *stack)
-+{
-+ show_stack_log_lvl(tsk, (unsigned long)stack, NULL, "");
-+}
-+
-+void dump_stack(void)
-+{
-+ unsigned long stack;
-+
-+ show_trace_log_lvl(current, &stack, NULL, "");
-+}
-+EXPORT_SYMBOL(dump_stack);
-+
- static const char *cpu_modes[] = {
- "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
- "Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
- };
-
--void show_regs(struct pt_regs *regs)
-+void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl)
- {
- unsigned long sp = regs->sp;
- unsigned long lr = regs->lr;
- unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT;
-
-- if (!user_mode(regs))
-+ if (!user_mode(regs)) {
- sp = (unsigned long)regs + FRAME_SIZE_FULL;
-
-- print_symbol("PC is at %s\n", instruction_pointer(regs));
-- print_symbol("LR is at %s\n", lr);
-- printk("pc : [<%08lx>] lr : [<%08lx>] %s\n"
-- "sp : %08lx r12: %08lx r11: %08lx\n",
-- instruction_pointer(regs),
-- lr, print_tainted(), sp, regs->r12, regs->r11);
-- printk("r10: %08lx r9 : %08lx r8 : %08lx\n",
-- regs->r10, regs->r9, regs->r8);
-- printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
-- regs->r7, regs->r6, regs->r5, regs->r4);
-- printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
-- regs->r3, regs->r2, regs->r1, regs->r0);
-- printk("Flags: %c%c%c%c%c\n",
-+ printk("%s", log_lvl);
-+ print_symbol("PC is at %s\n", instruction_pointer(regs));
-+ printk("%s", log_lvl);
-+ print_symbol("LR is at %s\n", lr);
-+ }
-+
-+ printk("%spc : [<%08lx>] lr : [<%08lx>] %s\n"
-+ "%ssp : %08lx r12: %08lx r11: %08lx\n",
-+ log_lvl, instruction_pointer(regs), lr, print_tainted(),
-+ log_lvl, sp, regs->r12, regs->r11);
-+ printk("%sr10: %08lx r9 : %08lx r8 : %08lx\n",
-+ log_lvl, regs->r10, regs->r9, regs->r8);
-+ printk("%sr7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
-+ log_lvl, regs->r7, regs->r6, regs->r5, regs->r4);
-+ printk("%sr3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
-+ log_lvl, regs->r3, regs->r2, regs->r1, regs->r0);
-+ printk("%sFlags: %c%c%c%c%c\n", log_lvl,
- regs->sr & SR_Q ? 'Q' : 'q',
- regs->sr & SR_V ? 'V' : 'v',
- regs->sr & SR_N ? 'N' : 'n',
- regs->sr & SR_Z ? 'Z' : 'z',
- regs->sr & SR_C ? 'C' : 'c');
-- printk("Mode bits: %c%c%c%c%c%c%c%c%c\n",
-+ printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
- regs->sr & SR_H ? 'H' : 'h',
- regs->sr & SR_R ? 'R' : 'r',
- regs->sr & SR_J ? 'J' : 'j',
-@@ -156,9 +297,21 @@ void show_regs(struct pt_regs *regs)
- regs->sr & SR_I1M ? '1' : '.',
- regs->sr & SR_I0M ? '0' : '.',
- regs->sr & SR_GM ? 'G' : 'g');
-- printk("CPU Mode: %s\n", cpu_modes[mode]);
-+ printk("%sCPU Mode: %s\n", log_lvl, cpu_modes[mode]);
-+ printk("%sProcess: %s [%d] (task: %p thread: %p)\n",
-+ log_lvl, current->comm, current->pid, current,
-+ task_thread_info(current));
-+}
-+
-+void show_regs(struct pt_regs *regs)
-+{
-+ unsigned long sp = regs->sp;
-+
-+ if (!user_mode(regs))
-+ sp = (unsigned long)regs + FRAME_SIZE_FULL;
-
-- show_trace(NULL, (unsigned long *)sp, regs);
-+ show_regs_log_lvl(regs, "");
-+ show_trace_log_lvl(current, (unsigned long *)sp, regs, "");
- }
- EXPORT_SYMBOL(show_regs);
-
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index a1a7c3c..b279d66 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -8,12 +8,14 @@
-
- #include <linux/clk.h>
- #include <linux/init.h>
-+#include <linux/initrd.h>
- #include <linux/sched.h>
- #include <linux/console.h>
- #include <linux/ioport.h>
- #include <linux/bootmem.h>
- #include <linux/fs.h>
- #include <linux/module.h>
-+#include <linux/pfn.h>
- #include <linux/root_dev.h>
- #include <linux/cpu.h>
- #include <linux/kernel.h>
-@@ -30,13 +32,6 @@
- extern int root_mountflags;
-
- /*
-- * Bootloader-provided information about physical memory
-- */
--struct tag_mem_range *mem_phys;
--struct tag_mem_range *mem_reserved;
--struct tag_mem_range *mem_ramdisk;
--
--/*
- * Initialize loops_per_jiffy as 5000000 (500MIPS).
- * Better make it too large than too small...
- */
-@@ -48,48 +43,193 @@ EXPORT_SYMBOL(boot_cpu_data);
- static char __initdata command_line[COMMAND_LINE_SIZE];
-
- /*
-- * Should be more than enough, but if you have a _really_ complex
-- * setup, you might need to increase the size of this...
-+ * Standard memory resources
- */
--static struct tag_mem_range __initdata mem_range_cache[32];
--static unsigned mem_range_next_free;
-+static struct resource __initdata kernel_data = {
-+ .name = "Kernel data",
-+ .start = 0,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM,
-+};
-+static struct resource __initdata kernel_code = {
-+ .name = "Kernel code",
-+ .start = 0,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM,
-+ .sibling = &kernel_data,
-+};
-
- /*
-- * Standard memory resources
-+ * Available system RAM and reserved regions as singly linked
-+ * lists. These lists are traversed using the sibling pointer in
-+ * struct resource and are kept sorted at all times.
- */
--static struct resource mem_res[] = {
-- {
-- .name = "Kernel code",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_MEM
-- },
-- {
-- .name = "Kernel data",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_MEM,
-- },
--};
-+static struct resource *__initdata system_ram;
-+static struct resource *__initdata reserved = &kernel_code;
-+
-+/*
-+ * We need to allocate these before the bootmem allocator is up and
-+ * running, so we need this "cache". 32 entries are probably enough
-+ * for all but the most insanely complex systems.
-+ */
-+static struct resource __initdata res_cache[32];
-+static unsigned int __initdata res_cache_next_free;
-+
-+static void __init resource_init(void)
-+{
-+ struct resource *mem, *res;
-+ struct resource *new;
-+
-+ kernel_code.start = __pa(init_mm.start_code);
-+
-+ for (mem = system_ram; mem; mem = mem->sibling) {
-+ new = alloc_bootmem_low(sizeof(struct resource));
-+ memcpy(new, mem, sizeof(struct resource));
-+
-+ new->sibling = NULL;
-+ if (request_resource(&iomem_resource, new))
-+ printk(KERN_WARNING "Bad RAM resource %08x-%08x\n",
-+ mem->start, mem->end);
-+ }
-+
-+ for (res = reserved; res; res = res->sibling) {
-+ new = alloc_bootmem_low(sizeof(struct resource));
-+ memcpy(new, res, sizeof(struct resource));
-+
-+ new->sibling = NULL;
-+ if (insert_resource(&iomem_resource, new))
-+ printk(KERN_WARNING
-+ "Bad reserved resource %s (%08x-%08x)\n",
-+ res->name, res->start, res->end);
-+ }
-+}
-+
-+static void __init
-+add_physical_memory(resource_size_t start, resource_size_t end)
-+{
-+ struct resource *new, *next, **pprev;
-+
-+ for (pprev = &system_ram, next = system_ram; next;
-+ pprev = &next->sibling, next = next->sibling) {
-+ if (end < next->start)
-+ break;
-+ if (start <= next->end) {
-+ printk(KERN_WARNING
-+ "Warning: Physical memory map is broken\n");
-+ printk(KERN_WARNING
-+ "Warning: %08x-%08x overlaps %08x-%08x\n",
-+ start, end, next->start, next->end);
-+ return;
-+ }
-+ }
-+
-+ if (res_cache_next_free >= ARRAY_SIZE(res_cache)) {
-+ printk(KERN_WARNING
-+ "Warning: Failed to add physical memory %08x-%08x\n",
-+ start, end);
-+ return;
-+ }
-+
-+ new = &res_cache[res_cache_next_free++];
-+ new->start = start;
-+ new->end = end;
-+ new->name = "System RAM";
-+ new->flags = IORESOURCE_MEM;
-+
-+ *pprev = new;
-+}
-+
-+static int __init
-+add_reserved_region(resource_size_t start, resource_size_t end,
-+ const char *name)
-+{
-+ struct resource *new, *next, **pprev;
-+
-+ if (end < start)
-+ return -EINVAL;
-+
-+ if (res_cache_next_free >= ARRAY_SIZE(res_cache))
-+ return -ENOMEM;
-+
-+ for (pprev = &reserved, next = reserved; next;
-+ pprev = &next->sibling, next = next->sibling) {
-+ if (end < next->start)
-+ break;
-+ if (start <= next->end)
-+ return -EBUSY;
-+ }
-+
-+ new = &res_cache[res_cache_next_free++];
-+ new->start = start;
-+ new->end = end;
-+ new->name = name;
-+ new->flags = IORESOURCE_MEM;
-+
-+ *pprev = new;
-+
-+ return 0;
-+}
-+
-+static unsigned long __init
-+find_free_region(const struct resource *mem, resource_size_t size,
-+ resource_size_t align)
-+{
-+ struct resource *res;
-+ unsigned long target;
-+
-+ target = ALIGN(mem->start, align);
-+ for (res = reserved; res; res = res->sibling) {
-+ if ((target + size) <= res->start)
-+ break;
-+ if (target <= res->end)
-+ target = ALIGN(res->end + 1, align);
-+ }
-+
-+ if ((target + size) > (mem->end + 1))
-+ return mem->end + 1;
-+
-+ return target;
-+}
-+
-+static int __init
-+alloc_reserved_region(resource_size_t *start, resource_size_t size,
-+ resource_size_t align, const char *name)
-+{
-+ struct resource *mem;
-+ resource_size_t target;
-+ int ret;
-+
-+ for (mem = system_ram; mem; mem = mem->sibling) {
-+ target = find_free_region(mem, size, align);
-+ if (target <= mem->end) {
-+ ret = add_reserved_region(target, target + size - 1,
-+ name);
-+ if (!ret)
-+ *start = target;
-+ return ret;
-+ }
-+ }
-
--#define kernel_code mem_res[0]
--#define kernel_data mem_res[1]
-+ return -ENOMEM;
-+}
-
- /*
- * Early framebuffer allocation. Works as follows:
- * - If fbmem_size is zero, nothing will be allocated or reserved.
- * - If fbmem_start is zero when setup_bootmem() is called,
-- * fbmem_size bytes will be allocated from the bootmem allocator.
-+ * a block of fbmem_size bytes will be reserved before bootmem
-+ * initialization. It will be aligned to the largest page size
-+ * that fbmem_size is a multiple of.
- * - If fbmem_start is nonzero, an area of size fbmem_size will be
-- * reserved at the physical address fbmem_start if necessary. If
-- * the area isn't in a memory region known to the kernel, it will
-- * be left alone.
-+ * reserved at the physical address fbmem_start if possible. If
-+ * it collides with other reserved memory, a different block of
-+ * same size will be allocated, just as if fbmem_start was zero.
- *
- * Board-specific code may use these variables to set up platform data
- * for the framebuffer driver if fbmem_size is nonzero.
- */
--static unsigned long __initdata fbmem_start;
--static unsigned long __initdata fbmem_size;
-+resource_size_t __initdata fbmem_start;
-+resource_size_t __initdata fbmem_size;
-
- /*
- * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
-@@ -103,48 +243,42 @@ static unsigned long __initdata fbmem_size;
- */
- static int __init early_parse_fbmem(char *p)
- {
-+ int ret;
-+ unsigned long align;
-+
- fbmem_size = memparse(p, &p);
-- if (*p == '@')
-+ if (*p == '@') {
- fbmem_start = memparse(p, &p);
-- return 0;
--}
--early_param("fbmem", early_parse_fbmem);
--
--static inline void __init resource_init(void)
--{
-- struct tag_mem_range *region;
--
-- kernel_code.start = __pa(init_mm.start_code);
-- kernel_code.end = __pa(init_mm.end_code - 1);
-- kernel_data.start = __pa(init_mm.end_code);
-- kernel_data.end = __pa(init_mm.brk - 1);
--
-- for (region = mem_phys; region; region = region->next) {
-- struct resource *res;
-- unsigned long phys_start, phys_end;
--
-- if (region->size == 0)
-- continue;
--
-- phys_start = region->addr;
-- phys_end = phys_start + region->size - 1;
--
-- res = alloc_bootmem_low(sizeof(*res));
-- res->name = "System RAM";
-- res->start = phys_start;
-- res->end = phys_end;
-- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
--
-- request_resource (&iomem_resource, res);
-+ ret = add_reserved_region(fbmem_start,
-+ fbmem_start + fbmem_size - 1,
-+ "Framebuffer");
-+ if (ret) {
-+ printk(KERN_WARNING
-+ "Failed to reserve framebuffer memory\n");
-+ fbmem_start = 0;
-+ }
-+ }
-
-- if (kernel_code.start >= res->start &&
-- kernel_code.end <= res->end)
-- request_resource (res, &kernel_code);
-- if (kernel_data.start >= res->start &&
-- kernel_data.end <= res->end)
-- request_resource (res, &kernel_data);
-+ if (!fbmem_start) {
-+ if ((fbmem_size & 0x000fffffUL) == 0)
-+ align = 0x100000; /* 1 MiB */
-+ else if ((fbmem_size & 0x0000ffffUL) == 0)
-+ align = 0x10000; /* 64 KiB */
-+ else
-+ align = 0x1000; /* 4 KiB */
-+
-+ ret = alloc_reserved_region(&fbmem_start, fbmem_size,
-+ align, "Framebuffer");
-+ if (ret) {
-+ printk(KERN_WARNING
-+ "Failed to allocate framebuffer memory\n");
-+ fbmem_size = 0;
-+ }
- }
-+
-+ return 0;
- }
-+early_param("fbmem", early_parse_fbmem);
-
- static int __init parse_tag_core(struct tag *tag)
- {
-@@ -157,11 +291,9 @@ static int __init parse_tag_core(struct tag *tag)
- }
- __tagtable(ATAG_CORE, parse_tag_core);
-
--static int __init parse_tag_mem_range(struct tag *tag,
-- struct tag_mem_range **root)
-+static int __init parse_tag_mem(struct tag *tag)
- {
-- struct tag_mem_range *cur, **pprev;
-- struct tag_mem_range *new;
-+ unsigned long start, end;
-
- /*
- * Ignore zero-sized entries. If we're running standalone, the
-@@ -171,34 +303,53 @@ static int __init parse_tag_mem_range(struct tag *tag,
- if (tag->u.mem_range.size == 0)
- return 0;
-
-- /*
-- * Copy the data so the bootmem init code doesn't need to care
-- * about it.
-- */
-- if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
-- panic("Physical memory map too complex!\n");
-+ start = tag->u.mem_range.addr;
-+ end = tag->u.mem_range.addr + tag->u.mem_range.size - 1;
-+
-+ add_physical_memory(start, end);
-+ return 0;
-+}
-+__tagtable(ATAG_MEM, parse_tag_mem);
-+
-+static int __init parse_tag_rdimg(struct tag *tag)
-+{
-+#ifdef CONFIG_INITRD
-+ struct tag_mem_range *mem = &tag->u.mem_range;
-+ int ret;
-
-- new = &mem_range_cache[mem_range_next_free++];
-- *new = tag->u.mem_range;
-+ if (initrd_start) {
-+ printk(KERN_WARNING
-+ "Warning: Only the first initrd image will be used\n");
-+ return 0;
-+ }
-
-- pprev = root;
-- cur = *root;
-- while (cur) {
-- pprev = &cur->next;
-- cur = cur->next;
-+ ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
-+ "initrd");
-+ if (ret) {
-+ printk(KERN_WARNING
-+ "Warning: Failed to reserve initrd memory\n");
-+ return ret;
- }
-
-- *pprev = new;
-- new->next = NULL;
-+ initrd_start = (unsigned long)__va(mem->addr);
-+ initrd_end = initrd_start + mem->size;
-+#else
-+ printk(KERN_WARNING "RAM disk image present, but "
-+ "no initrd support in kernel, ignoring\n");
-+#endif
-
- return 0;
- }
-+__tagtable(ATAG_RDIMG, parse_tag_rdimg);
-
--static int __init parse_tag_mem(struct tag *tag)
-+static int __init parse_tag_rsvd_mem(struct tag *tag)
- {
-- return parse_tag_mem_range(tag, &mem_phys);
-+ struct tag_mem_range *mem = &tag->u.mem_range;
-+
-+ return add_reserved_region(mem->addr, mem->addr + mem->size - 1,
-+ "Reserved");
- }
--__tagtable(ATAG_MEM, parse_tag_mem);
-+__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
-
- static int __init parse_tag_cmdline(struct tag *tag)
- {
-@@ -207,12 +358,6 @@ static int __init parse_tag_cmdline(struct tag *tag)
- }
- __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
-
--static int __init parse_tag_rdimg(struct tag *tag)
--{
-- return parse_tag_mem_range(tag, &mem_ramdisk);
--}
--__tagtable(ATAG_RDIMG, parse_tag_rdimg);
--
- static int __init parse_tag_clock(struct tag *tag)
- {
- /*
-@@ -223,12 +368,6 @@ static int __init parse_tag_clock(struct tag *tag)
- }
- __tagtable(ATAG_CLOCK, parse_tag_clock);
-
--static int __init parse_tag_rsvd_mem(struct tag *tag)
--{
-- return parse_tag_mem_range(tag, &mem_reserved);
--}
--__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
--
- /*
- * Scan the tag table for this tag, and call its parse function. The
- * tag table is built by the linker from all the __tagtable
-@@ -260,10 +399,137 @@ static void __init parse_tags(struct tag *t)
- t->hdr.tag);
- }
-
-+/*
-+ * Find a free memory region large enough for storing the
-+ * bootmem bitmap.
-+ */
-+static unsigned long __init
-+find_bootmap_pfn(const struct resource *mem)
-+{
-+ unsigned long bootmap_pages, bootmap_len;
-+ unsigned long node_pages = PFN_UP(mem->end - mem->start + 1);
-+ unsigned long bootmap_start;
-+
-+ bootmap_pages = bootmem_bootmap_pages(node_pages);
-+ bootmap_len = bootmap_pages << PAGE_SHIFT;
-+
-+ /*
-+ * Find a large enough region without reserved pages for
-+ * storing the bootmem bitmap. We can take advantage of the
-+ * fact that all lists have been sorted.
-+ *
-+ * We have to check that we don't collide with any reserved
-+ * regions, which includes the kernel image and any RAMDISK
-+ * images.
-+ */
-+ bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE);
-+
-+ return bootmap_start >> PAGE_SHIFT;
-+}
-+
-+#define MAX_LOWMEM HIGHMEM_START
-+#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
-+
-+static void __init setup_bootmem(void)
-+{
-+ unsigned bootmap_size;
-+ unsigned long first_pfn, bootmap_pfn, pages;
-+ unsigned long max_pfn, max_low_pfn;
-+ unsigned node = 0;
-+ struct resource *res;
-+
-+ printk(KERN_INFO "Physical memory:\n");
-+ for (res = system_ram; res; res = res->sibling)
-+ printk(" %08x-%08x\n", res->start, res->end);
-+ printk(KERN_INFO "Reserved memory:\n");
-+ for (res = reserved; res; res = res->sibling)
-+ printk(" %08x-%08x: %s\n",
-+ res->start, res->end, res->name);
-+
-+ nodes_clear(node_online_map);
-+
-+ if (system_ram->sibling)
-+ printk(KERN_WARNING "Only using first memory bank\n");
-+
-+ for (res = system_ram; res; res = NULL) {
-+ first_pfn = PFN_UP(res->start);
-+ max_low_pfn = max_pfn = PFN_DOWN(res->end + 1);
-+ bootmap_pfn = find_bootmap_pfn(res);
-+ if (bootmap_pfn > max_pfn)
-+ panic("No space for bootmem bitmap!\n");
-+
-+ if (max_low_pfn > MAX_LOWMEM_PFN) {
-+ max_low_pfn = MAX_LOWMEM_PFN;
-+#ifndef CONFIG_HIGHMEM
-+ /*
-+ * Lowmem is memory that can be addressed
-+ * directly through P1/P2
-+ */
-+ printk(KERN_WARNING
-+ "Node %u: Only %ld MiB of memory will be used.\n",
-+ node, MAX_LOWMEM >> 20);
-+ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-+#else
-+#error HIGHMEM is not supported by AVR32 yet
-+#endif
-+ }
-+
-+ /* Initialize the boot-time allocator with low memory only. */
-+ bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
-+ first_pfn, max_low_pfn);
-+
-+ /*
-+ * Register fully available RAM pages with the bootmem
-+ * allocator.
-+ */
-+ pages = max_low_pfn - first_pfn;
-+ free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
-+ PFN_PHYS(pages));
-+
-+ /* Reserve space for the bootmem bitmap... */
-+ reserve_bootmem_node(NODE_DATA(node),
-+ PFN_PHYS(bootmap_pfn),
-+ bootmap_size);
-+
-+ /* ...and any other reserved regions. */
-+ for (res = reserved; res; res = res->sibling) {
-+ if (res->start > PFN_PHYS(max_pfn))
-+ break;
-+
-+ /*
-+ * resource_init will complain about partial
-+ * overlaps, so we'll just ignore such
-+ * resources for now.
-+ */
-+ if (res->start >= PFN_PHYS(first_pfn)
-+ && res->end < PFN_PHYS(max_pfn))
-+ reserve_bootmem_node(
-+ NODE_DATA(node), res->start,
-+ res->end - res->start + 1);
-+ }
-+
-+ node_set_online(node);
-+ }
-+}
-+
- void __init setup_arch (char **cmdline_p)
- {
- struct clk *cpu_clk;
-
-+ init_mm.start_code = (unsigned long)_text;
-+ init_mm.end_code = (unsigned long)_etext;
-+ init_mm.end_data = (unsigned long)_edata;
-+ init_mm.brk = (unsigned long)_end;
-+
-+ /*
-+ * Include .init section to make allocations easier. It will
-+ * be removed before the resource is actually requested.
-+ */
-+ kernel_code.start = __pa(__init_begin);
-+ kernel_code.end = __pa(init_mm.end_code - 1);
-+ kernel_data.start = __pa(init_mm.end_code);
-+ kernel_data.end = __pa(init_mm.brk - 1);
-+
- parse_tags(bootloader_tags);
-
- setup_processor();
-@@ -289,24 +555,16 @@ void __init setup_arch (char **cmdline_p)
- ((cpu_hz + 500) / 1000) % 1000);
- }
-
-- init_mm.start_code = (unsigned long) &_text;
-- init_mm.end_code = (unsigned long) &_etext;
-- init_mm.end_data = (unsigned long) &_edata;
-- init_mm.brk = (unsigned long) &_end;
--
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
- parse_early_param();
-
- setup_bootmem();
-
-- board_setup_fbmem(fbmem_start, fbmem_size);
--
- #ifdef CONFIG_VT
- conswitchp = &dummy_con;
- #endif
-
- paging_init();
--
- resource_init();
- }
-diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
-index c10833f..7014a35 100644
---- a/arch/avr32/kernel/time.c
-+++ b/arch/avr32/kernel/time.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2004-2006 Atmel Corporation
-+ * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- * Copyright 2001 MontaVista Software Inc.
-@@ -20,18 +20,25 @@
- #include <linux/init.h>
- #include <linux/profile.h>
- #include <linux/sysdev.h>
-+#include <linux/err.h>
-
- #include <asm/div64.h>
- #include <asm/sysreg.h>
- #include <asm/io.h>
- #include <asm/sections.h>
-
--static cycle_t read_cycle_count(void)
-+/* how many counter cycles in a jiffy? */
-+static u32 cycles_per_jiffy;
-+
-+/* the count value for the next timer interrupt */
-+static u32 expirelo;
-+
-+cycle_t __weak read_cycle_count(void)
- {
- return (cycle_t)sysreg_read(COUNT);
- }
-
--static struct clocksource clocksource_avr32 = {
-+struct clocksource __weak clocksource_avr32 = {
- .name = "avr32",
- .rating = 350,
- .read = read_cycle_count,
-@@ -40,12 +47,20 @@ static struct clocksource clocksource_avr32 = {
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- };
-
-+irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-+
-+struct irqaction timer_irqaction = {
-+ .handler = timer_interrupt,
-+ .flags = IRQF_DISABLED,
-+ .name = "timer",
-+};
-+
- /*
- * By default we provide the null RTC ops
- */
- static unsigned long null_rtc_get_time(void)
- {
-- return mktime(2004, 1, 1, 0, 0, 0);
-+ return mktime(2007, 1, 1, 0, 0, 0);
- }
-
- static int null_rtc_set_time(unsigned long sec)
-@@ -56,23 +71,14 @@ static int null_rtc_set_time(unsigned long sec)
- static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
- static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-
--/* how many counter cycles in a jiffy? */
--static unsigned long cycles_per_jiffy;
--
--/* cycle counter value at the previous timer interrupt */
--static unsigned int timerhi, timerlo;
--
--/* the count value for the next timer interrupt */
--static unsigned int expirelo;
--
- static void avr32_timer_ack(void)
- {
-- unsigned int count;
-+ u32 count;
-
- /* Ack this timer interrupt and set the next one */
- expirelo += cycles_per_jiffy;
-+ /* setting COMPARE to 0 stops the COUNT-COMPARE */
- if (expirelo == 0) {
-- printk(KERN_DEBUG "expirelo == 0\n");
- sysreg_write(COMPARE, expirelo + 1);
- } else {
- sysreg_write(COMPARE, expirelo);
-@@ -86,27 +92,56 @@ static void avr32_timer_ack(void)
- }
- }
-
--static unsigned int avr32_hpt_read(void)
-+int __weak avr32_hpt_init(void)
- {
-- return sysreg_read(COUNT);
-+ int ret;
-+ unsigned long mult, shift, count_hz;
-+
-+ count_hz = clk_get_rate(boot_cpu_data.clk);
-+ shift = clocksource_avr32.shift;
-+ mult = clocksource_hz2mult(count_hz, shift);
-+ clocksource_avr32.mult = mult;
-+
-+ {
-+ u64 tmp;
-+
-+ tmp = TICK_NSEC;
-+ tmp <<= shift;
-+ tmp += mult / 2;
-+ do_div(tmp, mult);
-+
-+ cycles_per_jiffy = tmp;
-+ }
-+
-+ ret = setup_irq(0, &timer_irqaction);
-+ if (ret) {
-+ pr_debug("timer: could not request IRQ 0: %d\n", ret);
-+ return -ENODEV;
-+ }
-+
-+ printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-+ "%lu.%03lu MHz\n",
-+ ((count_hz + 500) / 1000) / 1000,
-+ ((count_hz + 500) / 1000) % 1000);
-+
-+ return 0;
- }
-
- /*
- * Taken from MIPS c0_hpt_timer_init().
- *
-- * Why is it so complicated, and what is "count"? My assumption is
-- * that `count' specifies the "reference cycle", i.e. the cycle since
-- * reset that should mean "zero". The reason COUNT is written twice is
-- * probably to make sure we don't get any timer interrupts while we
-- * are messing with the counter.
-+ * The reason COUNT is written twice is probably to make sure we don't get any
-+ * timer interrupts while we are messing with the counter.
- */
--static void avr32_hpt_init(unsigned int count)
-+int __weak avr32_hpt_start(void)
- {
-- count = sysreg_read(COUNT) - count;
-+ u32 count = sysreg_read(COUNT);
- expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
- sysreg_write(COUNT, expirelo - cycles_per_jiffy);
- sysreg_write(COMPARE, expirelo);
- sysreg_write(COUNT, count);
-+
-+ return 0;
- }
-
- /*
-@@ -115,26 +150,18 @@ static void avr32_hpt_init(unsigned int count)
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- */
--static void local_timer_interrupt(int irq, void *dev_id)
-+void local_timer_interrupt(int irq, void *dev_id)
- {
- if (current->pid)
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
- }
-
--static irqreturn_t
--timer_interrupt(int irq, void *dev_id)
-+irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
- {
-- unsigned int count;
--
- /* ack timer interrupt and try to set next interrupt */
-- count = avr32_hpt_read();
- avr32_timer_ack();
-
-- /* Update timerhi/timerlo for intra-jiffy calibration */
-- timerhi += count < timerlo; /* Wrap around */
-- timerlo = count;
--
- /*
- * Call the generic timer interrupt handler
- */
-@@ -153,60 +180,37 @@ timer_interrupt(int irq, void *dev_id)
- return IRQ_HANDLED;
- }
-
--static struct irqaction timer_irqaction = {
-- .handler = timer_interrupt,
-- .flags = IRQF_DISABLED,
-- .name = "timer",
--};
--
- void __init time_init(void)
- {
-- unsigned long mult, shift, count_hz;
- int ret;
-
-+ /*
-+ * Make sure we don't get any COMPARE interrupts before we can
-+ * handle them.
-+ */
-+ sysreg_write(COMPARE, 0);
-+
- xtime.tv_sec = rtc_get_time();
- xtime.tv_nsec = 0;
-
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
-- printk("Before time_init: count=%08lx, compare=%08lx\n",
-- (unsigned long)sysreg_read(COUNT),
-- (unsigned long)sysreg_read(COMPARE));
--
-- count_hz = clk_get_rate(boot_cpu_data.clk);
-- shift = clocksource_avr32.shift;
-- mult = clocksource_hz2mult(count_hz, shift);
-- clocksource_avr32.mult = mult;
--
-- printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift);
--
-- {
-- u64 tmp;
--
-- tmp = TICK_NSEC;
-- tmp <<= shift;
-- tmp += mult / 2;
-- do_div(tmp, mult);
--
-- cycles_per_jiffy = tmp;
-+ ret = avr32_hpt_init();
-+ if (ret) {
-+ pr_debug("timer: failed setup: %d\n", ret);
-+ return;
- }
-
-- /* This sets up the high precision timer for the first interrupt. */
-- avr32_hpt_init(avr32_hpt_read());
--
-- printk("After time_init: count=%08lx, compare=%08lx\n",
-- (unsigned long)sysreg_read(COUNT),
-- (unsigned long)sysreg_read(COMPARE));
--
- ret = clocksource_register(&clocksource_avr32);
- if (ret)
-- printk(KERN_ERR
-- "timer: could not register clocksource: %d\n", ret);
-+ pr_debug("timer: could not register clocksource: %d\n", ret);
-
-- ret = setup_irq(0, &timer_irqaction);
-- if (ret)
-- printk("timer: could not request IRQ 0: %d\n", ret);
-+ ret = avr32_hpt_start();
-+ if (ret) {
-+ pr_debug("timer: failed starting: %d\n", ret);
-+ return;
-+ }
- }
-
- static struct sysdev_class timer_class = {
-diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
-index adc01a1..4d7ae14 100644
---- a/arch/avr32/kernel/traps.c
-+++ b/arch/avr32/kernel/traps.c
-@@ -5,158 +5,25 @@
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--#undef DEBUG
--#include <linux/sched.h>
-+
-+#include <linux/bug.h>
- #include <linux/init.h>
--#include <linux/module.h>
- #include <linux/kallsyms.h>
-+#include <linux/module.h>
- #include <linux/notifier.h>
-+#include <linux/sched.h>
-+#include <linux/uaccess.h>
-
--#include <asm/traps.h>
--#include <asm/sysreg.h>
- #include <asm/addrspace.h>
--#include <asm/ocd.h>
- #include <asm/mmu_context.h>
--#include <asm/uaccess.h>
--
--static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
--{
-- unsigned long p;
-- int i;
--
-- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
--
-- for (p = bottom & ~31; p < top; ) {
-- printk("%04lx: ", p & 0xffff);
--
-- for (i = 0; i < 8; i++, p += 4) {
-- unsigned int val;
--
-- if (p < bottom || p >= top)
-- printk(" ");
-- else {
-- if (__get_user(val, (unsigned int __user *)p)) {
-- printk("\n");
-- goto out;
-- }
-- printk("%08x ", val);
-- }
-- }
-- printk("\n");
-- }
--
--out:
-- return;
--}
--
--static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
--{
-- return (p > (unsigned long)tinfo)
-- && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
--}
--
--#ifdef CONFIG_FRAME_POINTER
--static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
-- struct pt_regs *regs)
--{
-- unsigned long lr, fp;
-- struct thread_info *tinfo;
--
-- tinfo = (struct thread_info *)
-- ((unsigned long)sp & ~(THREAD_SIZE - 1));
--
-- if (regs)
-- fp = regs->r7;
-- else if (tsk == current)
-- asm("mov %0, r7" : "=r"(fp));
-- else
-- fp = tsk->thread.cpu_context.r7;
--
-- /*
-- * Walk the stack as long as the frame pointer (a) is within
-- * the kernel stack of the task, and (b) it doesn't move
-- * downwards.
-- */
-- while (valid_stack_ptr(tinfo, fp)) {
-- unsigned long new_fp;
--
-- lr = *(unsigned long *)fp;
-- printk(" [<%08lx>] ", lr);
-- print_symbol("%s\n", lr);
--
-- new_fp = *(unsigned long *)(fp + 4);
-- if (new_fp <= fp)
-- break;
-- fp = new_fp;
-- }
-- printk("\n");
--}
--#else
--static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
-- struct pt_regs *regs)
--{
-- unsigned long addr;
--
-- while (!kstack_end(sp)) {
-- addr = *sp++;
-- if (kernel_text_address(addr)) {
-- printk(" [<%08lx>] ", addr);
-- print_symbol("%s\n", addr);
-- }
-- }
--}
--#endif
--
--void show_trace(struct task_struct *tsk, unsigned long *sp,
-- struct pt_regs *regs)
--{
-- if (regs &&
-- (((regs->sr & MODE_MASK) == MODE_EXCEPTION) ||
-- ((regs->sr & MODE_MASK) == MODE_USER)))
-- return;
--
-- printk ("Call trace:");
--#ifdef CONFIG_KALLSYMS
-- printk("\n");
--#endif
--
-- __show_trace(tsk, sp, regs);
-- printk("\n");
--}
--
--void show_stack(struct task_struct *tsk, unsigned long *sp)
--{
-- unsigned long stack;
--
-- if (!tsk)
-- tsk = current;
-- if (sp == 0) {
-- if (tsk == current) {
-- register unsigned long *real_sp __asm__("sp");
-- sp = real_sp;
-- } else {
-- sp = (unsigned long *)tsk->thread.cpu_context.ksp;
-- }
-- }
--
-- stack = (unsigned long)sp;
-- dump_mem("Stack: ", stack,
-- THREAD_SIZE + (unsigned long)tsk->thread_info);
-- show_trace(tsk, sp, NULL);
--}
--
--void dump_stack(void)
--{
-- show_stack(NULL, NULL);
--}
--EXPORT_SYMBOL(dump_stack);
-+#include <asm/ocd.h>
-+#include <asm/sysreg.h>
-+#include <asm/traps.h>
-
- ATOMIC_NOTIFIER_HEAD(avr32_die_chain);
-
- int register_die_notifier(struct notifier_block *nb)
- {
-- pr_debug("register_die_notifier: %p\n", nb);
--
- return atomic_notifier_chain_register(&avr32_die_chain, nb);
- }
- EXPORT_SYMBOL(register_die_notifier);
-@@ -169,98 +36,108 @@ EXPORT_SYMBOL(unregister_die_notifier);
-
- static DEFINE_SPINLOCK(die_lock);
-
--void __die(const char *str, struct pt_regs *regs, unsigned long err,
-- const char *file, const char *func, unsigned long line)
-+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
- {
-- struct task_struct *tsk = current;
- static int die_counter;
-
- console_verbose();
- spin_lock_irq(&die_lock);
- bust_spinlocks(1);
-
-- printk(KERN_ALERT "%s", str);
-- if (file && func)
-- printk(" in %s:%s, line %ld", file, func, line);
-- printk("[#%d]:\n", ++die_counter);
-- print_modules();
-- show_regs(regs);
-- printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-- tsk->comm, tsk->pid, tsk->thread_info + 1);
--
-- if (!user_mode(regs) || in_interrupt()) {
-- dump_mem("Stack: ", regs->sp,
-- THREAD_SIZE + (unsigned long)tsk->thread_info);
-+ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
-+ str, err, ++die_counter);
-+#ifdef CONFIG_PREEMPT
-+ printk("PREEMPT ");
-+#endif
-+#ifdef CONFIG_FRAME_POINTER
-+ printk("FRAME_POINTER ");
-+#endif
-+ if (current_cpu_data.features & AVR32_FEATURE_OCD) {
-+ unsigned long did = __mfdr(DBGREG_DID);
-+ printk("chip: 0x%03lx:0x%04lx rev %lu\n",
-+ (did >> 1) & 0x7ff,
-+ (did >> 12) & 0x7fff,
-+ (did >> 28) & 0xf);
-+ } else {
-+ printk("cpu: arch %u r%u / core %u r%u\n",
-+ current_cpu_data.arch_type,
-+ current_cpu_data.arch_revision,
-+ current_cpu_data.cpu_type,
-+ current_cpu_data.cpu_revision);
- }
-
-+ print_modules();
-+ show_regs_log_lvl(regs, KERN_EMERG);
-+ show_stack_log_lvl(current, regs->sp, regs, KERN_EMERG);
- bust_spinlocks(0);
- spin_unlock_irq(&die_lock);
-- do_exit(SIGSEGV);
-+
-+ if (in_interrupt())
-+ panic("Fatal exception in interrupt");
-+
-+ if (panic_on_oops)
-+ panic("Fatal exception");
-+
-+ do_exit(err);
- }
-
--void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err,
-- const char *file, const char *func, unsigned long line)
-+void _exception(long signr, struct pt_regs *regs, int code,
-+ unsigned long addr)
- {
-+ siginfo_t info;
-+
- if (!user_mode(regs))
-- __die(str, regs, err, file, func, line);
--}
-+ die("Unhandled exception in kernel mode", regs, signr);
-+
-+ memset(&info, 0, sizeof(info));
-+ info.si_signo = signr;
-+ info.si_code = code;
-+ info.si_addr = (void __user *)addr;
-+ force_sig_info(signr, &info, current);
-
--asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
--{
--#ifdef CONFIG_SUBARCH_AVR32B
- /*
-- * The exception entry always saves RSR_EX. For NMI, this is
-- * wrong; it should be RSR_NMI
-+ * Init gets no signals that it doesn't have a handler for.
-+ * That's all very well, but if it has caused a synchronous
-+ * exception and we ignore the resulting signal, it will just
-+ * generate the same exception over and over again and we get
-+ * nowhere. Better to kill it and let the kernel panic.
- */
-- regs->sr = sysreg_read(RSR_NMI);
--#endif
-+ if (is_init(current)) {
-+ __sighandler_t handler;
-+
-+ spin_lock_irq(&current->sighand->siglock);
-+ handler = current->sighand->action[signr-1].sa.sa_handler;
-+ spin_unlock_irq(&current->sighand->siglock);
-+ if (handler == SIG_DFL) {
-+ /* init has generated a synchronous exception
-+ and it doesn't have a handler for the signal */
-+ printk(KERN_CRIT "init has generated signal %ld "
-+ "but has no handler for it\n", signr);
-+ do_exit(signr);
-+ }
-+ }
-+}
-
-- printk("NMI taken!!!!\n");
-- die("NMI", regs, ecr);
-- BUG();
-+asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
-+{
-+ printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
-+ show_regs_log_lvl(regs, KERN_ALERT);
-+ show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
- }
-
- asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
- {
-- printk("Unable to handle critical exception %lu at pc = %08lx!\n",
-- ecr, regs->pc);
-- die("Oops", regs, ecr);
-- BUG();
-+ die("Critical exception", regs, SIGKILL);
- }
-
- asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs)
- {
-- siginfo_t info;
--
-- die_if_kernel("Oops: Address exception in kernel mode", regs, ecr);
--
--#ifdef DEBUG
-- if (ecr == ECR_ADDR_ALIGN_X)
-- pr_debug("Instruction Address Exception at pc = %08lx\n",
-- regs->pc);
-- else if (ecr == ECR_ADDR_ALIGN_R)
-- pr_debug("Data Address Exception (Read) at pc = %08lx\n",
-- regs->pc);
-- else if (ecr == ECR_ADDR_ALIGN_W)
-- pr_debug("Data Address Exception (Write) at pc = %08lx\n",
-- regs->pc);
-- else
-- BUG();
--
-- show_regs(regs);
--#endif
--
-- info.si_signo = SIGBUS;
-- info.si_errno = 0;
-- info.si_code = BUS_ADRALN;
-- info.si_addr = (void __user *)regs->pc;
--
-- force_sig_info(SIGBUS, &info, current);
-+ _exception(SIGBUS, regs, BUS_ADRALN, regs->pc);
- }
-
- /* This way of handling undefined instructions is stolen from ARM */
- static LIST_HEAD(undef_hook);
--static spinlock_t undef_lock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(undef_lock);
-
- void register_undef_hook(struct undef_hook *hook)
- {
-@@ -280,7 +157,8 @@ static int do_cop_absent(u32 insn)
- {
- int cop_nr;
- u32 cpucr;
-- if ( (insn & 0xfdf00000) == 0xf1900000 )
-+
-+ if ((insn & 0xfdf00000) == 0xf1900000)
- /* LDC0 */
- cop_nr = 0;
- else
-@@ -292,136 +170,91 @@ static int do_cop_absent(u32 insn)
- sysreg_write(CPUCR, cpucr);
-
- cpucr = sysreg_read(CPUCR);
-- if ( !(cpucr & (1 << (24 + cop_nr))) ){
-- printk("Coprocessor #%i not found!\n", cop_nr);
-- return -1;
-- }
-+ if (!(cpucr & (1 << (24 + cop_nr))))
-+ return -ENODEV;
-
- return 0;
- }
-
--#ifdef CONFIG_BUG
--#ifdef CONFIG_DEBUG_BUGVERBOSE
--static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
--{
-- char *file;
-- u16 line;
-- char c;
--
-- if (__get_user(line, (u16 __user *)(regs->pc + 2)))
-- return;
-- if (__get_user(file, (char * __user *)(regs->pc + 4))
-- || (unsigned long)file < PAGE_OFFSET
-- || __get_user(c, file))
-- file = "<bad filename>";
--
-- printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
--}
--#else
--static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
-+int is_valid_bugaddr(unsigned long pc)
- {
-+ unsigned short opcode;
-+
-+ if (pc < PAGE_OFFSET)
-+ return 0;
-+ if (probe_kernel_address((u16 *)pc, opcode))
-+ return 0;
-
-+ return opcode == AVR32_BUG_OPCODE;
- }
--#endif
--#endif
-
- asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
- {
- u32 insn;
- struct undef_hook *hook;
-- siginfo_t info;
- void __user *pc;
-+ long code;
-
-- if (!user_mode(regs))
-- goto kernel_trap;
-+ if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
-+ enum bug_trap_type type;
-+
-+ type = report_bug(regs->pc);
-+ switch (type) {
-+ case BUG_TRAP_TYPE_NONE:
-+ break;
-+ case BUG_TRAP_TYPE_WARN:
-+ regs->pc += 2;
-+ return;
-+ case BUG_TRAP_TYPE_BUG:
-+ die("Kernel BUG", regs, SIGKILL);
-+ }
-+ }
-
- local_irq_enable();
-
-- pc = (void __user *)instruction_pointer(regs);
-- if (__get_user(insn, (u32 __user *)pc))
-- goto invalid_area;
-+ if (user_mode(regs)) {
-+ pc = (void __user *)instruction_pointer(regs);
-+ if (get_user(insn, (u32 __user *)pc))
-+ goto invalid_area;
-
-- if (ecr == ECR_COPROC_ABSENT) {
-- if (do_cop_absent(insn) == 0)
-+ if (ecr == ECR_COPROC_ABSENT && !do_cop_absent(insn))
- return;
-- }
-
-- spin_lock_irq(&undef_lock);
-- list_for_each_entry(hook, &undef_hook, node) {
-- if ((insn & hook->insn_mask) == hook->insn_val) {
-- if (hook->fn(regs, insn) == 0) {
-- spin_unlock_irq(&undef_lock);
-- return;
-+ spin_lock_irq(&undef_lock);
-+ list_for_each_entry(hook, &undef_hook, node) {
-+ if ((insn & hook->insn_mask) == hook->insn_val) {
-+ if (hook->fn(regs, insn) == 0) {
-+ spin_unlock_irq(&undef_lock);
-+ return;
-+ }
- }
- }
-+ spin_unlock_irq(&undef_lock);
- }
-- spin_unlock_irq(&undef_lock);
--
--invalid_area:
-
--#ifdef DEBUG
-- printk("Illegal instruction at pc = %08lx\n", regs->pc);
-- if (regs->pc < TASK_SIZE) {
-- unsigned long ptbr, pgd, pte, *p;
--
-- ptbr = sysreg_read(PTBR);
-- p = (unsigned long *)ptbr;
-- pgd = p[regs->pc >> 22];
-- p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000);
-- pte = p[(regs->pc >> 12) & 0x3ff];
-- printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte);
-- }
--#endif
--
-- info.si_signo = SIGILL;
-- info.si_errno = 0;
-- info.si_addr = (void __user *)regs->pc;
- switch (ecr) {
-- case ECR_ILLEGAL_OPCODE:
-- case ECR_UNIMPL_INSTRUCTION:
-- info.si_code = ILL_ILLOPC;
-- break;
- case ECR_PRIVILEGE_VIOLATION:
-- info.si_code = ILL_PRVOPC;
-+ code = ILL_PRVOPC;
- break;
- case ECR_COPROC_ABSENT:
-- info.si_code = ILL_COPROC;
-+ code = ILL_COPROC;
- break;
- default:
-- BUG();
-+ code = ILL_ILLOPC;
-+ break;
- }
-
-- force_sig_info(SIGILL, &info, current);
-+ _exception(SIGILL, regs, code, regs->pc);
- return;
-
--kernel_trap:
--#ifdef CONFIG_BUG
-- if (__kernel_text_address(instruction_pointer(regs))) {
-- insn = *(u16 *)instruction_pointer(regs);
-- if (insn == AVR32_BUG_OPCODE) {
-- do_bug_verbose(regs, insn);
-- die("Kernel BUG", regs, 0);
-- return;
-- }
-- }
--#endif
--
-- die("Oops: Illegal instruction in kernel code", regs, ecr);
-+invalid_area:
-+ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->pc);
- }
-
- asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs)
- {
-- siginfo_t info;
--
-- printk("Floating-point exception at pc = %08lx\n", regs->pc);
--
-- /* We have no FPU... */
-- info.si_signo = SIGILL;
-- info.si_errno = 0;
-- info.si_addr = (void __user *)regs->pc;
-- info.si_code = ILL_COPROC;
--
-- force_sig_info(SIGILL, &info, current);
-+ /* We have no FPU yet */
-+ _exception(SIGILL, regs, ILL_COPROC, regs->pc);
- }
-
-
-diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
-index ef13b7c..e7f72c9 100644
---- a/arch/avr32/kernel/vmlinux.lds.c
-+++ b/arch/avr32/kernel/vmlinux.lds.c
-@@ -26,10 +26,16 @@ SECTIONS
- _sinittext = .;
- *(.text.reset)
- *(.init.text)
-+ /*
-+ * .exit.text is discarded at runtime, not
-+ * link time, to deal with references from
-+ * __bug_table
-+ */
-+ *(.exit.text)
- _einittext = .;
- . = ALIGN(4);
- __tagtable_begin = .;
-- *(.taglist)
-+ *(.taglist.init)
- __tagtable_end = .;
- *(.init.data)
- . = ALIGN(16);
-@@ -86,6 +92,8 @@ SECTIONS
- __stop___ex_table = .;
- }
-
-+ BUG_TABLE
-+
- RODATA
-
- . = ALIGN(8192);
-@@ -126,7 +134,6 @@ SECTIONS
- * thrown away, as cleanup code is never called unless it's a module.
- */
- /DISCARD/ : {
-- *(.exit.text)
- *(.exit.data)
- *(.exitcall.exit)
- }
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-new file mode 100644
-index 0000000..eb30783
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -0,0 +1,31 @@
-+if PLATFORM_AT32AP
-+
-+menu "Atmel AVR32 AP options"
-+
-+choice
-+ prompt "AT32AP7000 static memory bus width"
-+ depends on CPU_AT32AP7000
-+ default AP7000_16_BIT_SMC
-+ help
-+ Define the width of the AP7000 external static memory interface.
-+ This is used to determine how to mangle the address and/or data
-+ when doing little-endian port access.
-+
-+ The current code can only support a single external memory bus
-+ width for all chip selects, excluding the flash (which is using
-+ raw access and is thus not affected by any of this.)
-+
-+config AP7000_32_BIT_SMC
-+ bool "32 bit"
-+
-+config AP7000_16_BIT_SMC
-+ bool "16 bit"
-+
-+config AP7000_8_BIT_SMC
-+ bool "8 bit"
-+
-+endchoice
-+
-+endmenu
-+
-+endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index b21bea9..f1d3957 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,2 +1,3 @@
- obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
-+obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 472703f..028883f 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -6,6 +6,7 @@
- * published by the Free Software Foundation.
- */
- #include <linux/clk.h>
-+#include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-@@ -17,7 +18,10 @@
- #include <asm/arch/portmux.h>
- #include <asm/arch/sm.h>
-
-+#include <video/atmel_lcdc.h>
-+
- #include "clock.h"
-+#include "hmatrix.h"
- #include "pio.h"
- #include "sm.h"
-
-@@ -407,8 +411,6 @@ static void __init genclk_init_parent(struct clk *clk)
- static struct resource sm_resource[] = {
- PBMEM(0xfff00000),
- NAMED_IRQ(19, "eim"),
-- NAMED_IRQ(20, "pm"),
-- NAMED_IRQ(21, "rtc"),
- };
- struct platform_device at32_sm_device = {
- .name = "sm",
-@@ -416,7 +418,55 @@ struct platform_device at32_sm_device = {
- .resource = sm_resource,
- .num_resources = ARRAY_SIZE(sm_resource),
- };
--DEV_CLK(pclk, at32_sm, pbb, 0);
-+static struct clk at32_sm_pclk = {
-+ .name = "pclk",
-+ .dev = &at32_sm_device.dev,
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 0,
-+};
-+
-+static struct resource pm_resource[] = {
-+ PBMEM(0xfff00000),
-+ IRQ(20),
-+};
-+struct platform_device at32_pm_device = {
-+ .name = "pm",
-+ .id = 0,
-+ .resource = pm_resource,
-+ .num_resources = ARRAY_SIZE(pm_resource),
-+};
-+
-+static struct resource rtc_resource[] = {
-+ {
-+ .start = 0xfff00080,
-+ .end = 0xfff000a3,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(21),
-+};
-+struct platform_device at32_rtc_device = {
-+ .name = "rtc",
-+ .id = 0,
-+ .resource = rtc_resource,
-+ .num_resources = ARRAY_SIZE(rtc_resource),
-+};
-+
-+static struct resource wdt_resource[] = {
-+ {
-+ .start = 0xfff000b0,
-+ .end = 0xfff000b7,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+struct platform_device at32_wdt_device = {
-+ .name = "wdt",
-+ .id = 0,
-+ .resource = wdt_resource,
-+ .num_resources = ARRAY_SIZE(wdt_resource),
-+};
-
- static struct resource intc0_resource[] = {
- PBMEM(0xfff00400),
-@@ -442,6 +492,7 @@ static struct clk hramc_clk = {
- .mode = hsb_clk_mode,
- .get_rate = hsb_clk_get_rate,
- .users = 1,
-+ .index = 3,
- };
-
- static struct resource smc0_resource[] = {
-@@ -466,6 +517,68 @@ static struct clk pico_clk = {
- .users = 1,
- };
-
-+static struct resource dmaca0_resource[] = {
-+ {
-+ .start = 0xff200000,
-+ .end = 0xff20ffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
-+
-+/* --------------------------------------------------------------------
-+ * HMATRIX
-+ * -------------------------------------------------------------------- */
-+
-+static struct clk hmatrix_clk = {
-+ .name = "hmatrix_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 2,
-+ .users = 1,
-+};
-+#define HMATRIX_BASE ((void __iomem *)0xfff00800)
-+
-+#define hmatrix_readl(reg) \
-+ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-+#define hmatrix_writel(reg,value) \
-+ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
-+
-+/*
-+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
-+ * External Bus Interface (EBI). This can be used to enable special
-+ * features like CompactFlash support, NAND Flash support, etc. on
-+ * certain chipselects.
-+ */
-+static inline void set_ebi_sfr_bits(u32 mask)
-+{
-+ u32 sfr;
-+
-+ clk_enable(&hmatrix_clk);
-+ sfr = hmatrix_readl(SFR4);
-+ sfr |= mask;
-+ hmatrix_writel(SFR4, sfr);
-+ clk_disable(&hmatrix_clk);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * System Timer/Counter (TC)
-+ * -------------------------------------------------------------------- */
-+static struct resource at32_systc0_resource[] = {
-+ PBMEM(0xfff00c00),
-+ IRQ(22),
-+};
-+struct platform_device at32_systc0_device = {
-+ .name = "systc",
-+ .id = 0,
-+ .resource = at32_systc0_resource,
-+ .num_resources = ARRAY_SIZE(at32_systc0_resource),
-+};
-+DEV_CLK(pclk, at32_systc0, pbb, 3);
-+
- /* --------------------------------------------------------------------
- * PIO
- * -------------------------------------------------------------------- */
-@@ -510,9 +623,15 @@ void __init at32_add_system_devices(void)
- system_manager.eim_first_irq = EIM_IRQ_BASE;
-
- platform_device_register(&at32_sm_device);
-+ platform_device_register(&at32_pm_device);
-+ platform_device_register(&at32_rtc_device);
-+ platform_device_register(&at32_wdt_device);
- platform_device_register(&at32_intc0_device);
- platform_device_register(&smc0_device);
- platform_device_register(&pdc_device);
-+ platform_device_register(&dmaca0_device);
-+
-+ platform_device_register(&at32_systc0_device);
-
- platform_device_register(&pio0_device);
- platform_device_register(&pio1_device);
-@@ -816,22 +935,105 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- }
-
- /* --------------------------------------------------------------------
-+ * TWI
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource atmel_twi0_resource[] = {
-+ PBMEM(0xffe00800),
-+ IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
-+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_twi0_device;
-+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-+ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */
-+ break;
-+
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+ PBMEM(0xfff02400),
-+ IRQ(28),
-+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_mci0_device;
-+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ if (data) {
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, 0);
-+ if (data->wp_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->wp_pin, 0);
-+ memcpy(pdev->dev.platform_data, data,
-+ sizeof(struct mci_platform_data));
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
- * LCDC
- * -------------------------------------------------------------------- */
--static struct lcdc_platform_data lcdc0_data;
--static struct resource lcdc0_resource[] = {
-+static struct atmel_lcdfb_info atmel_lcdfb0_data;
-+static struct resource atmel_lcdfb0_resource[] = {
- {
- .start = 0xff000000,
- .end = 0xff000fff,
- .flags = IORESOURCE_MEM,
- },
- IRQ(1),
-+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = 0,
-+ },
- };
--DEFINE_DEV_DATA(lcdc, 0);
--DEV_CLK(hclk, lcdc0, hsb, 7);
--static struct clk lcdc0_pixclk = {
-- .name = "pixclk",
-- .dev = &lcdc0_device.dev,
-+DEFINE_DEV_DATA(atmel_lcdfb, 0);
-+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
-+static struct clk atmel_lcdfb0_pixclk = {
-+ .name = "lcdc_clk",
-+ .dev = &atmel_lcdfb0_device.dev,
- .mode = genclk_mode,
- .get_rate = genclk_get_rate,
- .set_rate = genclk_set_rate,
-@@ -840,13 +1042,34 @@ static struct clk lcdc0_pixclk = {
- };
-
- struct platform_device *__init
--at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len)
- {
- struct platform_device *pdev;
-+ struct atmel_lcdfb_info *info;
-+ struct fb_monspecs *monspecs;
-+ struct fb_videomode *modedb;
-+ unsigned int modedb_size;
-+
-+ /*
-+ * Do a deep copy of the fb data, monspecs and modedb. Make
-+ * sure all allocations are done before setting up the
-+ * portmux.
-+ */
-+ monspecs = kmemdup(data->default_monspecs,
-+ sizeof(struct fb_monspecs), GFP_KERNEL);
-+ if (!monspecs)
-+ return NULL;
-+
-+ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-+ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-+ if (!modedb)
-+ goto err_dup_modedb;
-+ monspecs->modedb = modedb;
-
- switch (id) {
- case 0:
-- pdev = &lcdc0_device;
-+ pdev = &atmel_lcdfb0_device;
- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-@@ -879,16 +1102,287 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-
-- clk_set_parent(&lcdc0_pixclk, &pll0);
-- clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
-+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+ break;
-+
-+ default:
-+ goto err_invalid_id;
-+ }
-+
-+ if (fbmem_len) {
-+ pdev->resource[2].start = fbmem_start;
-+ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-+ pdev->resource[2].flags = IORESOURCE_MEM;
-+ }
-+
-+ info = pdev->dev.platform_data;
-+ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-+ info->default_monspecs = monspecs;
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+
-+err_invalid_id:
-+ kfree(modedb);
-+err_dup_modedb:
-+ kfree(monspecs);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff3fffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ PBMEM(0xfff03000),
-+ IRQ(31),
-+};
-+DEFINE_DEV(usba, 0);
-+DEV_CLK(pclk, usba0, pbb, 12);
-+DEV_CLK(hclk, usba0, hsb, 6);
-+
-+struct platform_device *__init at32_add_device_usba(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &usba0_device;
-+ /* USB pads are not multiplexed */
- break;
-+ default:
-+ return NULL;
-+ }
-
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * SSC
-+ * -------------------------------------------------------------------- */
-+static struct resource ssc0_resource[] = {
-+ PBMEM(0xffe01c00),
-+ IRQ(10),
-+};
-+DEFINE_DEV(ssc, 0);
-+DEV_CLK(pclk, ssc0, pba, 7);
-+
-+static struct resource ssc1_resource[] = {
-+ PBMEM(0xffe02000),
-+ IRQ(11),
-+};
-+DEFINE_DEV(ssc, 1);
-+DEV_CLK(pclk, ssc1, pba, 8);
-+
-+static struct resource ssc2_resource[] = {
-+ PBMEM(0xffe02400),
-+ IRQ(12),
-+};
-+DEFINE_DEV(ssc, 2);
-+DEV_CLK(pclk, ssc2, pba, 9);
-+
-+struct platform_device *__init
-+at32_add_device_ssc(unsigned int id, unsigned int flags)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &ssc0_device;
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
-+ break;
-+ case 1:
-+ pdev = &ssc1_device;
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
-+ break;
-+ case 2:
-+ pdev = &ssc2_device;
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+ PBMEM(0xfff02800),
-+ IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
-+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_ac97c0_device;
-+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
-+ break;
- default:
- return NULL;
- }
-
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+ PBMEM(0xfff02000),
-+ IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+ .name = "sample_clk",
-+ .dev = &abdac0_device.dev,
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &abdac0_device;
-+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * CompactFlash
-+ * -------------------------------------------------------------------- */
-+static struct cf_platform_data at32_cf0_data;
-+static struct resource at32_cf0_resource[] = {
-+ {
-+ .start = 0x04000000,
-+ .end = 0x07ffffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(~0UL),
-+};
-+DEFINE_DEV_DATA(at32_cf, 0);
-+
-+struct platform_device *__init
-+at32_add_device_cf(unsigned int id, unsigned int extint,
-+ struct cf_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+ unsigned int extint_pin;
-+
-+ switch (extint) {
-+ case 0:
-+ extint_pin = GPIO_PIN_PB(25);
-+ break;
-+ case 1:
-+ extint_pin = GPIO_PIN_PB(26);
-+ break;
-+ case 2:
-+ extint_pin = GPIO_PIN_PB(27);
-+ break;
-+ case 3:
-+ extint_pin = GPIO_PIN_PB(28);
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &at32_cf0_device;
-+ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 */
-+ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 */
-+ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 */
-+ select_peripheral(PE(23), PERIPH_A, 0); /* CFNRW */
-+ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT */
-+ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
-+ data->cs = 4;
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ if (data->detect_pin)
-+ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-+ if (data->reset_pin)
-+ at32_select_gpio(data->reset_pin, 0);
-+ if (data->vcc_pin)
-+ at32_select_gpio(data->vcc_pin, 0);
-+
-+ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_PULLUP);
-+ pdev->resource[1].start = system_manager.eim_first_irq + extint;
-+ pdev->resource[1].end = pdev->resource[1].start;
-+
- memcpy(pdev->dev.platform_data, data,
-- sizeof(struct lcdc_platform_data));
-+ sizeof(struct cf_platform_data));
-
- platform_device_register(pdev);
- return pdev;
-@@ -950,18 +1444,21 @@ struct clk *at32_clock_list[] = {
- &pbb_clk,
- &at32_sm_pclk,
- &at32_intc0_pclk,
-+ &hmatrix_clk,
- &ebi_clk,
- &hramc_clk,
- &smc0_pclk,
- &smc0_mck,
- &pdc_hclk,
- &pdc_pclk,
-+ &dmaca0_hclk,
- &pico_clk,
- &pio0_mck,
- &pio1_mck,
- &pio2_mck,
- &pio3_mck,
- &pio4_mck,
-+ &at32_systc0_pclk,
- &atmel_usart0_usart,
- &atmel_usart1_usart,
- &atmel_usart2_usart,
-@@ -972,8 +1469,18 @@ struct clk *at32_clock_list[] = {
- &macb1_pclk,
- &atmel_spi0_spi_clk,
- &atmel_spi1_spi_clk,
-- &lcdc0_hclk,
-- &lcdc0_pixclk,
-+ &atmel_twi0_pclk,
-+ &atmel_mci0_mci_clk,
-+ &atmel_lcdfb0_hck1,
-+ &atmel_lcdfb0_pixclk,
-+ &usba0_pclk,
-+ &usba0_hclk,
-+ &ssc0_pclk,
-+ &ssc1_pclk,
-+ &ssc2_pclk,
-+ &atmel_ac97c0_pclk,
-+ &abdac0_pclk,
-+ &abdac0_sample_clk,
- &gclk0,
- &gclk1,
- &gclk2,
-@@ -1012,7 +1519,8 @@ void __init at32_clock_init(void)
- genclk_init_parent(&gclk2);
- genclk_init_parent(&gclk3);
- genclk_init_parent(&gclk4);
-- genclk_init_parent(&lcdc0_pixclk);
-+ genclk_init_parent(&atmel_lcdfb0_pixclk);
-+ genclk_init_parent(&abdac0_sample_clk);
-
- /*
- * Turn on all clocks that have at least one user already, and
-@@ -1024,6 +1532,9 @@ void __init at32_clock_init(void)
- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
- struct clk *clk = at32_clock_list[i];
-
-+ if (clk->users == 0)
-+ continue;
-+
- if (clk->mode == &cpu_clk_mode)
- cpu_mask |= 1 << clk->index;
- else if (clk->mode == &hsb_clk_mode)
-diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
-index 00c4354..e8a12a3 100644
---- a/arch/avr32/mach-at32ap/clock.c
-+++ b/arch/avr32/mach-at32ap/clock.c
-@@ -18,7 +18,7 @@
-
- #include "clock.h"
-
--static spinlock_t clk_lock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(clk_lock);
-
- struct clk *clk_get(struct device *dev, const char *id)
- {
-@@ -125,7 +125,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
- ret = clk->set_rate(clk, rate, 1);
- spin_unlock_irqrestore(&clk_lock, flags);
-
-- return (ret < 0) ? ret : 0;
-+ return (ret > 0) ? ret : 0;
- }
- EXPORT_SYMBOL(clk_set_rate);
-
-diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
-new file mode 100644
-index 0000000..d10bfb6
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/hmatrix.h
-@@ -0,0 +1,182 @@
-+/*
-+ * Register definitions for High-Speed Bus Matrix
-+ */
-+#ifndef __HMATRIX_H
-+#define __HMATRIX_H
-+
-+/* HMATRIX register offsets */
-+#define HMATRIX_MCFG0 0x0000
-+#define HMATRIX_MCFG1 0x0004
-+#define HMATRIX_MCFG2 0x0008
-+#define HMATRIX_MCFG3 0x000c
-+#define HMATRIX_MCFG4 0x0010
-+#define HMATRIX_MCFG5 0x0014
-+#define HMATRIX_MCFG6 0x0018
-+#define HMATRIX_MCFG7 0x001c
-+#define HMATRIX_MCFG8 0x0020
-+#define HMATRIX_MCFG9 0x0024
-+#define HMATRIX_MCFG10 0x0028
-+#define HMATRIX_MCFG11 0x002c
-+#define HMATRIX_MCFG12 0x0030
-+#define HMATRIX_MCFG13 0x0034
-+#define HMATRIX_MCFG14 0x0038
-+#define HMATRIX_MCFG15 0x003c
-+#define HMATRIX_SCFG0 0x0040
-+#define HMATRIX_SCFG1 0x0044
-+#define HMATRIX_SCFG2 0x0048
-+#define HMATRIX_SCFG3 0x004c
-+#define HMATRIX_SCFG4 0x0050
-+#define HMATRIX_SCFG5 0x0054
-+#define HMATRIX_SCFG6 0x0058
-+#define HMATRIX_SCFG7 0x005c
-+#define HMATRIX_SCFG8 0x0060
-+#define HMATRIX_SCFG9 0x0064
-+#define HMATRIX_SCFG10 0x0068
-+#define HMATRIX_SCFG11 0x006c
-+#define HMATRIX_SCFG12 0x0070
-+#define HMATRIX_SCFG13 0x0074
-+#define HMATRIX_SCFG14 0x0078
-+#define HMATRIX_SCFG15 0x007c
-+#define HMATRIX_PRAS0 0x0080
-+#define HMATRIX_PRBS0 0x0084
-+#define HMATRIX_PRAS1 0x0088
-+#define HMATRIX_PRBS1 0x008c
-+#define HMATRIX_PRAS2 0x0090
-+#define HMATRIX_PRBS2 0x0094
-+#define HMATRIX_PRAS3 0x0098
-+#define HMATRIX_PRBS3 0x009c
-+#define HMATRIX_PRAS4 0x00a0
-+#define HMATRIX_PRBS4 0x00a4
-+#define HMATRIX_PRAS5 0x00a8
-+#define HMATRIX_PRBS5 0x00ac
-+#define HMATRIX_PRAS6 0x00b0
-+#define HMATRIX_PRBS6 0x00b4
-+#define HMATRIX_PRAS7 0x00b8
-+#define HMATRIX_PRBS7 0x00bc
-+#define HMATRIX_PRAS8 0x00c0
-+#define HMATRIX_PRBS8 0x00c4
-+#define HMATRIX_PRAS9 0x00c8
-+#define HMATRIX_PRBS9 0x00cc
-+#define HMATRIX_PRAS10 0x00d0
-+#define HMATRIX_PRBS10 0x00d4
-+#define HMATRIX_PRAS11 0x00d8
-+#define HMATRIX_PRBS11 0x00dc
-+#define HMATRIX_PRAS12 0x00e0
-+#define HMATRIX_PRBS12 0x00e4
-+#define HMATRIX_PRAS13 0x00e8
-+#define HMATRIX_PRBS13 0x00ec
-+#define HMATRIX_PRAS14 0x00f0
-+#define HMATRIX_PRBS14 0x00f4
-+#define HMATRIX_PRAS15 0x00f8
-+#define HMATRIX_PRBS15 0x00fc
-+#define HMATRIX_MRCR 0x0100
-+#define HMATRIX_SFR0 0x0110
-+#define HMATRIX_SFR1 0x0114
-+#define HMATRIX_SFR2 0x0118
-+#define HMATRIX_SFR3 0x011c
-+#define HMATRIX_SFR4 0x0120
-+#define HMATRIX_SFR5 0x0124
-+#define HMATRIX_SFR6 0x0128
-+#define HMATRIX_SFR7 0x012c
-+#define HMATRIX_SFR8 0x0130
-+#define HMATRIX_SFR9 0x0134
-+#define HMATRIX_SFR10 0x0138
-+#define HMATRIX_SFR11 0x013c
-+#define HMATRIX_SFR12 0x0140
-+#define HMATRIX_SFR13 0x0144
-+#define HMATRIX_SFR14 0x0148
-+#define HMATRIX_SFR15 0x014c
-+
-+/* Bitfields in MCFGx */
-+#define HMATRIX_ULBT_OFFSET 0
-+#define HMATRIX_ULBT_SIZE 3
-+
-+/* Bitfields in SCFGx */
-+#define HMATRIX_SLOT_CYCLE_OFFSET 0
-+#define HMATRIX_SLOT_CYCLE_SIZE 8
-+#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
-+#define HMATRIX_DEFMSTR_TYPE_SIZE 2
-+#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
-+#define HMATRIX_FIXED_DEFMSTR_SIZE 4
-+#define HMATRIX_ARBT_OFFSET 24
-+#define HMATRIX_ARBT_SIZE 2
-+
-+/* Bitfields in PRASx */
-+#define HMATRIX_M0PR_OFFSET 0
-+#define HMATRIX_M0PR_SIZE 4
-+#define HMATRIX_M1PR_OFFSET 4
-+#define HMATRIX_M1PR_SIZE 4
-+#define HMATRIX_M2PR_OFFSET 8
-+#define HMATRIX_M2PR_SIZE 4
-+#define HMATRIX_M3PR_OFFSET 12
-+#define HMATRIX_M3PR_SIZE 4
-+#define HMATRIX_M4PR_OFFSET 16
-+#define HMATRIX_M4PR_SIZE 4
-+#define HMATRIX_M5PR_OFFSET 20
-+#define HMATRIX_M5PR_SIZE 4
-+#define HMATRIX_M6PR_OFFSET 24
-+#define HMATRIX_M6PR_SIZE 4
-+#define HMATRIX_M7PR_OFFSET 28
-+#define HMATRIX_M7PR_SIZE 4
-+
-+/* Bitfields in PRBSx */
-+#define HMATRIX_M8PR_OFFSET 0
-+#define HMATRIX_M8PR_SIZE 4
-+#define HMATRIX_M9PR_OFFSET 4
-+#define HMATRIX_M9PR_SIZE 4
-+#define HMATRIX_M10PR_OFFSET 8
-+#define HMATRIX_M10PR_SIZE 4
-+#define HMATRIX_M11PR_OFFSET 12
-+#define HMATRIX_M11PR_SIZE 4
-+#define HMATRIX_M12PR_OFFSET 16
-+#define HMATRIX_M12PR_SIZE 4
-+#define HMATRIX_M13PR_OFFSET 20
-+#define HMATRIX_M13PR_SIZE 4
-+#define HMATRIX_M14PR_OFFSET 24
-+#define HMATRIX_M14PR_SIZE 4
-+#define HMATRIX_M15PR_OFFSET 28
-+#define HMATRIX_M15PR_SIZE 4
-+
-+/* Bitfields in SFR4 */
-+#define HMATRIX_CS1A_OFFSET 1
-+#define HMATRIX_CS1A_SIZE 1
-+#define HMATRIX_CS3A_OFFSET 3
-+#define HMATRIX_CS3A_SIZE 1
-+#define HMATRIX_CS4A_OFFSET 4
-+#define HMATRIX_CS4A_SIZE 1
-+#define HMATRIX_CS5A_OFFSET 5
-+#define HMATRIX_CS5A_SIZE 1
-+#define HMATRIX_DBPUC_OFFSET 8
-+#define HMATRIX_DBPUC_SIZE 1
-+
-+/* Constants for ULBT */
-+#define HMATRIX_ULBT_INFINITE 0
-+#define HMATRIX_ULBT_SINGLE 1
-+#define HMATRIX_ULBT_FOUR_BEAT 2
-+#define HMATRIX_ULBT_EIGHT_BEAT 3
-+#define HMATRIX_ULBT_SIXTEEN_BEAT 4
-+
-+/* Constants for DEFMSTR_TYPE */
-+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
-+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
-+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
-+
-+/* Constants for ARBT */
-+#define HMATRIX_ARBT_ROUND_ROBIN 0
-+#define HMATRIX_ARBT_FIXED_PRIORITY 1
-+
-+/* Bit manipulation macros */
-+#define HMATRIX_BIT(name) \
-+ (1 << HMATRIX_##name##_OFFSET)
-+#define HMATRIX_BF(name,value) \
-+ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
-+ << HMATRIX_##name##_OFFSET)
-+#define HMATRIX_BFEXT(name,value) \
-+ (((value) >> HMATRIX_##name##_OFFSET) \
-+ & ((1 << HMATRIX_##name##_SIZE) - 1))
-+#define HMATRIX_BFINS(name,value,old) \
-+ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
-+ << HMATRIX_##name##_OFFSET)) \
-+ | HMATRIX_BF(name,value))
-+
-+#endif /* __HMATRIX_H */
-diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
-index 7691721..5e22a75 100644
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -75,12 +75,35 @@ int smc_set_configuration(int cs, const struct smc_config *config)
- return -EINVAL;
- }
-
-+ switch (config->nwait_mode) {
-+ case 0:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
-+ break;
-+ case 1:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
-+ break;
-+ case 2:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
-+ break;
-+ case 3:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (config->tdf_cycles) {
-+ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
-+ }
-+
- if (config->nrd_controlled)
- mode |= HSMC_BIT(READ_MODE);
- if (config->nwe_controlled)
- mode |= HSMC_BIT(WRITE_MODE);
- if (config->byte_write)
- mode |= HSMC_BIT(BAT);
-+ if (config->tdf_mode)
-+ mode |= HSMC_BIT(TDF_MODE);
-
- pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
- cs, setup, pulse, cycle, mode);
-diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c
-new file mode 100644
-index 0000000..e3070bd
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/time-tc.c
-@@ -0,0 +1,218 @@
-+/*
-+ * Copyright (C) 2004-2007 Atmel Corporation
-+ *
-+ * Based on MIPS implementation arch/mips/kernel/time.c
-+ * Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clocksource.h>
-+#include <linux/time.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/profile.h>
-+#include <linux/sysdev.h>
-+#include <linux/err.h>
-+
-+#include <asm/div64.h>
-+#include <asm/sysreg.h>
-+#include <asm/io.h>
-+#include <asm/sections.h>
-+
-+#include <asm/arch/time.h>
-+
-+/* how many counter cycles in a jiffy? */
-+static u32 cycles_per_jiffy;
-+
-+/* the count value for the next timer interrupt */
-+static u32 expirelo;
-+
-+/* the I/O registers of the TC module */
-+static void __iomem *ioregs;
-+
-+cycle_t read_cycle_count(void)
-+{
-+ return (cycle_t)timer_read(ioregs, 0, CV);
-+}
-+
-+struct clocksource clocksource_avr32 = {
-+ .name = "avr32",
-+ .rating = 342,
-+ .read = read_cycle_count,
-+ .mask = CLOCKSOURCE_MASK(16),
-+ .shift = 16,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static void avr32_timer_ack(void)
-+{
-+ u16 count = expirelo;
-+
-+ /* Ack this timer interrupt and set the next one, use a u16
-+ * variable so it will wrap around correctly */
-+ count += cycles_per_jiffy;
-+ expirelo = count;
-+ timer_write(ioregs, 0, RC, expirelo);
-+
-+ /* Check to see if we have missed any timer interrupts */
-+ count = timer_read(ioregs, 0, CV);
-+ if ((count - expirelo) < 0x7fff) {
-+ expirelo = count + cycles_per_jiffy;
-+ timer_write(ioregs, 0, RC, expirelo);
-+ }
-+}
-+
-+u32 avr32_hpt_read(void)
-+{
-+ return timer_read(ioregs, 0, CV);
-+}
-+
-+static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
-+{
-+ unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-+ unsigned int divs[] = { 4, 8, 16, 32 };
-+ int divs_size = sizeof(divs) / sizeof(*divs);
-+ int i = 0;
-+ unsigned long count_hz;
-+ unsigned long shift;
-+ unsigned long mult;
-+ int clock_div = -1;
-+ u64 tmp;
-+
-+ shift = clocksource_avr32.shift;
-+
-+ do {
-+ count_hz = clk_get_rate(pclk) / divs[i];
-+ mult = clocksource_hz2mult(count_hz, shift);
-+ clocksource_avr32.mult = mult;
-+
-+ tmp = TICK_NSEC;
-+ tmp <<= shift;
-+ tmp += mult / 2;
-+ do_div(tmp, mult);
-+
-+ cycles_per_jiffy = tmp;
-+ } while (cycles_per_jiffy > cycles_max && ++i < divs_size);
-+
-+ clock_div = i + 1;
-+
-+ if (clock_div > divs_size) {
-+ pr_debug("timer: could not calculate clock divider\n");
-+ return -EFAULT;
-+ }
-+
-+ /* Set the clock divider */
-+ timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
-+
-+ return 0;
-+}
-+
-+int avr32_hpt_init(unsigned int count)
-+{
-+ struct resource *regs;
-+ struct clk *pclk;
-+ int irq = -1;
-+ int ret = 0;
-+
-+ ret = -ENXIO;
-+
-+ irq = platform_get_irq(&at32_systc0_device, 0);
-+ if (irq < 0) {
-+ pr_debug("timer: could not get irq\n");
-+ goto out_error;
-+ }
-+
-+ pclk = clk_get(&at32_systc0_device.dev, "pclk");
-+ if (IS_ERR(pclk)) {
-+ pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-+ goto out_error;
-+ }
-+ clk_enable(pclk);
-+
-+ regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ pr_debug("timer: could not get resource\n");
-+ goto out_error_clk;
-+ }
-+
-+ ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!ioregs) {
-+ pr_debug("timer: could not get ioregs\n");
-+ goto out_error_clk;
-+ }
-+
-+ ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-+ if (ret)
-+ goto out_error_io;
-+
-+ ret = setup_irq(irq, &timer_irqaction);
-+ if (ret) {
-+ pr_debug("timer: could not request irq %d: %d\n",
-+ irq, ret);
-+ goto out_error_io;
-+ }
-+
-+ expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-+ * cycles_per_jiffy;
-+
-+ /* Enable clock and interrupts on RC compare */
-+ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-+ timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-+ /* Set cycles to first interrupt */
-+ timer_write(ioregs, 0, RC, expirelo);
-+
-+ printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-+ ioregs, irq);
-+
-+ return 0;
-+
-+out_error_io:
-+ iounmap(ioregs);
-+out_error_clk:
-+ clk_put(pclk);
-+out_error:
-+ return ret;
-+}
-+
-+int avr32_hpt_start(void)
-+{
-+ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-+ return 0;
-+}
-+
-+irqreturn_t timer_interrupt(int irq, void *dev_id)
-+{
-+ unsigned int sr = timer_read(ioregs, 0, SR);
-+
-+ if (sr & TIMER_BIT(SR_CPCS)) {
-+ /* ack timer interrupt and try to set next interrupt */
-+ avr32_timer_ack();
-+
-+ /*
-+ * Call the generic timer interrupt handler
-+ */
-+ write_seqlock(&xtime_lock);
-+ do_timer(1);
-+ write_sequnlock(&xtime_lock);
-+
-+ /*
-+ * In UP mode, we call local_timer_interrupt() to do profiling
-+ * and process accounting.
-+ *
-+ * SMP is not supported yet.
-+ */
-+ local_timer_interrupt(irq, dev_id);
-+
-+ return IRQ_HANDLED;
-+ }
-+
-+ return IRQ_NONE;
-+}
-diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index b68d669..099212d 100644
---- a/arch/avr32/mm/dma-coherent.c
-+++ b/arch/avr32/mm/dma-coherent.c
-@@ -112,16 +112,21 @@ void dma_free_coherent(struct device *dev, size_t size,
- }
- EXPORT_SYMBOL(dma_free_coherent);
-
--#if 0
- void *dma_alloc_writecombine(struct device *dev, size_t size,
- dma_addr_t *handle, gfp_t gfp)
- {
- struct page *page;
-+ dma_addr_t phys;
-
- page = __dma_alloc(dev, size, handle, gfp);
-+ if (!page)
-+ return NULL;
-+
-+ phys = page_to_phys(page);
-+ *handle = phys;
-
- /* Now, map the page into P3 with write-combining turned on */
-- return __ioremap(page_to_phys(page), size, _PAGE_BUFFER);
-+ return __ioremap(phys, size, _PAGE_BUFFER);
- }
- EXPORT_SYMBOL(dma_alloc_writecombine);
-
-@@ -132,8 +137,7 @@ void dma_free_writecombine(struct device *dev, size_t size,
-
- iounmap(cpu_addr);
-
-- page = bus_to_page(handle);
-+ page = phys_to_page(handle);
- __dma_free(dev, size, page, handle);
- }
- EXPORT_SYMBOL(dma_free_writecombine);
--#endif
-diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
-index 6785572..11941d8 100644
---- a/arch/avr32/mm/fault.c
-+++ b/arch/avr32/mm/fault.c
-@@ -12,73 +12,46 @@
- #include <linux/mm.h>
- #include <linux/module.h>
- #include <linux/pagemap.h>
-+#include <linux/kprobes.h>
-
- #include <asm/kdebug.h>
- #include <asm/mmu_context.h>
- #include <asm/sysreg.h>
--#include <asm/uaccess.h>
- #include <asm/tlb.h>
--
--#ifdef DEBUG
--static void dump_code(unsigned long pc)
--{
-- char *p = (char *)pc;
-- char val;
-- int i;
--
--
-- printk(KERN_DEBUG "Code:");
-- for (i = 0; i < 16; i++) {
-- if (__get_user(val, p + i))
-- break;
-- printk(" %02x", val);
-- }
-- printk("\n");
--}
--#endif
-+#include <asm/uaccess.h>
-
- #ifdef CONFIG_KPROBES
--ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
--
--/* Hook to register for page fault notifications */
--int register_page_fault_notifier(struct notifier_block *nb)
-+static inline int notify_page_fault(struct pt_regs *regs, int trap)
- {
-- return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
--}
-+ int ret = 0;
-
--int unregister_page_fault_notifier(struct notifier_block *nb)
--{
-- return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
--}
-+ if (!user_mode(regs)) {
-+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
-+ ret = 1;
-+ }
-
--static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
-- int trap, int sig)
--{
-- struct die_args args = {
-- .regs = regs,
-- .trapnr = trap,
-- };
-- return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
-+ return ret;
- }
- #else
--static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
-- int trap, int sig)
-+static inline int notify_page_fault(struct pt_regs *regs, int trap)
- {
-- return NOTIFY_DONE;
-+ return 0;
- }
- #endif
-
-+int exception_trace = 1;
-+
- /*
- * This routine handles page faults. It determines the address and the
- * problem, and then passes it off to one of the appropriate routines.
- *
- * ecr is the Exception Cause Register. Possible values are:
-- * 5: Page not found (instruction access)
- * 6: Protection fault (instruction access)
-- * 12: Page not found (read access)
-- * 13: Page not found (write access)
-- * 14: Protection fault (read access)
-- * 15: Protection fault (write access)
-+ * 15: Protection fault (read access)
-+ * 16: Protection fault (write access)
-+ * 20: Page not found (instruction access)
-+ * 24: Page not found (read access)
-+ * 28: Page not found (write access)
- */
- asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- {
-@@ -88,10 +61,11 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- const struct exception_table_entry *fixup;
- unsigned long address;
- unsigned long page;
-- int writeaccess = 0;
-+ int writeaccess;
-+ long signr;
-+ int code;
-
-- if (notify_page_fault(DIE_PAGE_FAULT, regs,
-- ecr, SIGSEGV) == NOTIFY_STOP)
-+ if (notify_page_fault(regs, ecr))
- return;
-
- address = sysreg_read(TLBEAR);
-@@ -99,6 +73,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- tsk = current;
- mm = tsk->mm;
-
-+ signr = SIGSEGV;
-+ code = SEGV_MAPERR;
-+
- /*
- * If we're in an interrupt or have no user context, we must
- * not take the fault...
-@@ -125,7 +102,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- * can handle it...
- */
- good_area:
-- //pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags);
-+ code = SEGV_ACCERR;
-+ writeaccess = 0;
-+
- switch (ecr) {
- case ECR_PROTECTION_X:
- case ECR_TLB_MISS_X:
-@@ -176,46 +155,24 @@ survive:
- * map. Fix it, but check if it's kernel or user first...
- */
- bad_area:
-- pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n",
-- tsk->comm, tsk->pid, address, ecr);
--
- up_read(&mm->mmap_sem);
-
- if (user_mode(regs)) {
-- /* Hmm...we have to pass address and ecr somehow... */
-- /* tsk->thread.address = address;
-- tsk->thread.error_code = ecr; */
--#ifdef DEBUG
-- show_regs(regs);
-- dump_code(regs->pc);
--
-- page = sysreg_read(PTBR);
-- printk("ptbr = %08lx", page);
-- if (page) {
-- page = ((unsigned long *)page)[address >> 22];
-- printk(" pgd = %08lx", page);
-- if (page & _PAGE_PRESENT) {
-- page &= PAGE_MASK;
-- address &= 0x003ff000;
-- page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
-- printk(" pte = %08lx\n", page);
-- }
-- }
--#endif
-- pr_debug("Sending SIGSEGV to PID %d...\n",
-- tsk->pid);
-- force_sig(SIGSEGV, tsk);
-+ if (exception_trace && printk_ratelimit())
-+ printk("%s%s[%d]: segfault at %08lx pc %08lx "
-+ "sp %08lx ecr %lu\n",
-+ is_init(tsk) ? KERN_EMERG : KERN_INFO,
-+ tsk->comm, tsk->pid, address, regs->pc,
-+ regs->sp, ecr);
-+ _exception(SIGSEGV, regs, code, address);
- return;
- }
-
- no_context:
-- pr_debug("No context\n");
--
- /* Are we prepared to handle this kernel fault? */
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
-- pr_debug("Found fixup at %08lx\n", fixup->fixup);
- return;
- }
-
-@@ -230,7 +187,6 @@ no_context:
- printk(KERN_ALERT
- "Unable to handle kernel paging request");
- printk(" at virtual address %08lx\n", address);
-- printk(KERN_ALERT "pc = %08lx\n", regs->pc);
-
- page = sysreg_read(PTBR);
- printk(KERN_ALERT "ptbr = %08lx", page);
-@@ -241,20 +197,20 @@ no_context:
- page &= PAGE_MASK;
- address &= 0x003ff000;
- page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
-- printk(" pte = %08lx\n", page);
-+ printk(" pte = %08lx", page);
- }
- }
-- die("\nOops", regs, ecr);
-- do_exit(SIGKILL);
-+ printk("\n");
-+ die("Kernel access of bad area", regs, signr);
-+ return;
-
- /*
- * We ran out of memory, or some other thing happened to us
- * that made us unable to handle the page fault gracefully.
- */
- out_of_memory:
-- printk("Out of memory\n");
- up_read(&mm->mmap_sem);
-- if (current->pid == 1) {
-+ if (is_init(current)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
-@@ -267,21 +223,20 @@ out_of_memory:
- do_sigbus:
- up_read(&mm->mmap_sem);
-
-- /*
-- * Send a sigbus, regardless of whether we were in kernel or
-- * user mode.
-- */
-- /* address, error_code, trap_no, ... */
--#ifdef DEBUG
-- show_regs(regs);
-- dump_code(regs->pc);
--#endif
-- pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid);
-- force_sig(SIGBUS, tsk);
--
- /* Kernel mode? Handle exceptions or die */
-+ signr = SIGBUS;
-+ code = BUS_ADRERR;
- if (!user_mode(regs))
- goto no_context;
-+
-+ if (exception_trace)
-+ printk("%s%s[%d]: bus error at %08lx pc %08lx "
-+ "sp %08lx ecr %lu\n",
-+ is_init(tsk) ? KERN_EMERG : KERN_INFO,
-+ tsk->comm, tsk->pid, address, regs->pc,
-+ regs->sp, ecr);
-+
-+ _exception(SIGBUS, regs, BUS_ADRERR, address);
- }
-
- asmlinkage void do_bus_error(unsigned long addr, int write_access,
-@@ -292,8 +247,7 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access,
- addr, write_access ? "write" : "read");
- printk(KERN_INFO "DTLB dump:\n");
- dump_dtlb();
-- die("Bus Error", regs, write_access);
-- do_exit(SIGKILL);
-+ die("Bus Error", regs, SIGKILL);
- }
-
- /*
-diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
-index 70da689..82cf708 100644
---- a/arch/avr32/mm/init.c
-+++ b/arch/avr32/mm/init.c
-@@ -10,11 +10,9 @@
- #include <linux/mm.h>
- #include <linux/swap.h>
- #include <linux/init.h>
--#include <linux/initrd.h>
- #include <linux/mmzone.h>
- #include <linux/bootmem.h>
- #include <linux/pagemap.h>
--#include <linux/pfn.h>
- #include <linux/nodemask.h>
-
- #include <asm/page.h>
-@@ -78,242 +76,6 @@ void show_mem(void)
- printk ("%d pages swap cached\n", cached);
- }
-
--static void __init print_memory_map(const char *what,
-- struct tag_mem_range *mem)
--{
-- printk ("%s:\n", what);
-- for (; mem; mem = mem->next) {
-- printk (" %08lx - %08lx\n",
-- (unsigned long)mem->addr,
-- (unsigned long)(mem->addr + mem->size));
-- }
--}
--
--#define MAX_LOWMEM HIGHMEM_START
--#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
--
--/*
-- * Sort a list of memory regions in-place by ascending address.
-- *
-- * We're using bubble sort because we only have singly linked lists
-- * with few elements.
-- */
--static void __init sort_mem_list(struct tag_mem_range **pmem)
--{
-- int done;
-- struct tag_mem_range **a, **b;
--
-- if (!*pmem)
-- return;
--
-- do {
-- done = 1;
-- a = pmem, b = &(*pmem)->next;
-- while (*b) {
-- if ((*a)->addr > (*b)->addr) {
-- struct tag_mem_range *tmp;
-- tmp = (*b)->next;
-- (*b)->next = *a;
-- *a = *b;
-- *b = tmp;
-- done = 0;
-- }
-- a = &(*a)->next;
-- b = &(*a)->next;
-- }
-- } while (!done);
--}
--
--/*
-- * Find a free memory region large enough for storing the
-- * bootmem bitmap.
-- */
--static unsigned long __init
--find_bootmap_pfn(const struct tag_mem_range *mem)
--{
-- unsigned long bootmap_pages, bootmap_len;
-- unsigned long node_pages = PFN_UP(mem->size);
-- unsigned long bootmap_addr = mem->addr;
-- struct tag_mem_range *reserved = mem_reserved;
-- struct tag_mem_range *ramdisk = mem_ramdisk;
-- unsigned long kern_start = virt_to_phys(_stext);
-- unsigned long kern_end = virt_to_phys(_end);
--
-- bootmap_pages = bootmem_bootmap_pages(node_pages);
-- bootmap_len = bootmap_pages << PAGE_SHIFT;
--
-- /*
-- * Find a large enough region without reserved pages for
-- * storing the bootmem bitmap. We can take advantage of the
-- * fact that all lists have been sorted.
-- *
-- * We have to check explicitly reserved regions as well as the
-- * kernel image and any RAMDISK images...
-- *
-- * Oh, and we have to make sure we don't overwrite the taglist
-- * since we're going to use it until the bootmem allocator is
-- * fully up and running.
-- */
-- while (1) {
-- if ((bootmap_addr < kern_end) &&
-- ((bootmap_addr + bootmap_len) > kern_start))
-- bootmap_addr = kern_end;
--
-- while (reserved &&
-- (bootmap_addr >= (reserved->addr + reserved->size)))
-- reserved = reserved->next;
--
-- if (reserved &&
-- ((bootmap_addr + bootmap_len) >= reserved->addr)) {
-- bootmap_addr = reserved->addr + reserved->size;
-- continue;
-- }
--
-- while (ramdisk &&
-- (bootmap_addr >= (ramdisk->addr + ramdisk->size)))
-- ramdisk = ramdisk->next;
--
-- if (!ramdisk ||
-- ((bootmap_addr + bootmap_len) < ramdisk->addr))
-- break;
--
-- bootmap_addr = ramdisk->addr + ramdisk->size;
-- }
--
-- if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size))
-- return ~0UL;
--
-- return PFN_UP(bootmap_addr);
--}
--
--void __init setup_bootmem(void)
--{
-- unsigned bootmap_size;
-- unsigned long first_pfn, bootmap_pfn, pages;
-- unsigned long max_pfn, max_low_pfn;
-- unsigned long kern_start = virt_to_phys(_stext);
-- unsigned long kern_end = virt_to_phys(_end);
-- unsigned node = 0;
-- struct tag_mem_range *bank, *res;
--
-- sort_mem_list(&mem_phys);
-- sort_mem_list(&mem_reserved);
--
-- print_memory_map("Physical memory", mem_phys);
-- print_memory_map("Reserved memory", mem_reserved);
--
-- nodes_clear(node_online_map);
--
-- if (mem_ramdisk) {
--#ifdef CONFIG_BLK_DEV_INITRD
-- initrd_start = (unsigned long)__va(mem_ramdisk->addr);
-- initrd_end = initrd_start + mem_ramdisk->size;
--
-- print_memory_map("RAMDISK images", mem_ramdisk);
-- if (mem_ramdisk->next)
-- printk(KERN_WARNING
-- "Warning: Only the first RAMDISK image "
-- "will be used\n");
-- sort_mem_list(&mem_ramdisk);
--#else
-- printk(KERN_WARNING "RAM disk image present, but "
-- "no initrd support in kernel!\n");
--#endif
-- }
--
-- if (mem_phys->next)
-- printk(KERN_WARNING "Only using first memory bank\n");
--
-- for (bank = mem_phys; bank; bank = NULL) {
-- first_pfn = PFN_UP(bank->addr);
-- max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size);
-- bootmap_pfn = find_bootmap_pfn(bank);
-- if (bootmap_pfn > max_pfn)
-- panic("No space for bootmem bitmap!\n");
--
-- if (max_low_pfn > MAX_LOWMEM_PFN) {
-- max_low_pfn = MAX_LOWMEM_PFN;
--#ifndef CONFIG_HIGHMEM
-- /*
-- * Lowmem is memory that can be addressed
-- * directly through P1/P2
-- */
-- printk(KERN_WARNING
-- "Node %u: Only %ld MiB of memory will be used.\n",
-- node, MAX_LOWMEM >> 20);
-- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
--#else
--#error HIGHMEM is not supported by AVR32 yet
--#endif
-- }
--
-- /* Initialize the boot-time allocator with low memory only. */
-- bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
-- first_pfn, max_low_pfn);
--
-- printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n",
-- node, NODE_DATA(node)->bdata,
-- NODE_DATA(node)->bdata->node_bootmem_map);
--
-- /*
-- * Register fully available RAM pages with the bootmem
-- * allocator.
-- */
-- pages = max_low_pfn - first_pfn;
-- free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
-- PFN_PHYS(pages));
--
-- /*
-- * Reserve space for the kernel image (if present in
-- * this node)...
-- */
-- if ((kern_start >= PFN_PHYS(first_pfn)) &&
-- (kern_start < PFN_PHYS(max_pfn))) {
-- printk("Node %u: Kernel image %08lx - %08lx\n",
-- node, kern_start, kern_end);
-- reserve_bootmem_node(NODE_DATA(node), kern_start,
-- kern_end - kern_start);
-- }
--
-- /* ...the bootmem bitmap... */
-- reserve_bootmem_node(NODE_DATA(node),
-- PFN_PHYS(bootmap_pfn),
-- bootmap_size);
--
-- /* ...any RAMDISK images... */
-- for (res = mem_ramdisk; res; res = res->next) {
-- if (res->addr > PFN_PHYS(max_pfn))
-- break;
--
-- if (res->addr >= PFN_PHYS(first_pfn)) {
-- printk("Node %u: RAMDISK %08lx - %08lx\n",
-- node,
-- (unsigned long)res->addr,
-- (unsigned long)(res->addr + res->size));
-- reserve_bootmem_node(NODE_DATA(node),
-- res->addr, res->size);
-- }
-- }
--
-- /* ...and any other reserved regions. */
-- for (res = mem_reserved; res; res = res->next) {
-- if (res->addr > PFN_PHYS(max_pfn))
-- break;
--
-- if (res->addr >= PFN_PHYS(first_pfn)) {
-- printk("Node %u: Reserved %08lx - %08lx\n",
-- node,
-- (unsigned long)res->addr,
-- (unsigned long)(res->addr + res->size));
-- reserve_bootmem_node(NODE_DATA(node),
-- res->addr, res->size);
-- }
-- }
--
-- node_set_online(node);
-- }
--}
--
- /*
- * paging_init() sets up the page tables
- *
-diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
-index e812aa1..84d9847 100644
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -183,6 +183,26 @@ config PNX4008_WATCHDOG
-
- Say N if you are unsure.
-
-+# AVR32 Architecture
-+
-+config AT32AP700X_WDT
-+ tristate "AT32AP700x watchdog"
-+ depends on WATCHDOG && CPU_AT32AP7000
-+ help
-+ Watchdog timer embedded into AT32AP700x devices. This will reboot
-+ your system when the timeout is reached.
-+
-+config AT32AP700X_WDT_TIMEOUT
-+ int "Timeout value for AT32AP700x watchdog"
-+ depends on AT32AP700X_WDT
-+ default "2"
-+ range 1 2
-+ help
-+ Sets the timeout value for the watchdog in AT32AP700x devices.
-+ Limited by hardware to be 1 or 2 seconds.
-+
-+ Set to 2 seconds by default.
-+
- # X86 (i386 + ia64 + x86_64) Architecture
-
- config ACQUIRE_WDT
-diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
-index 2cd8ff8..8b2a530 100644
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -35,6 +35,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
-
-+# AVR32 Architecture
-+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
-new file mode 100644
-index 0000000..789456d
---- /dev/null
-+++ b/drivers/char/watchdog/at32ap700x_wdt.c
-@@ -0,0 +1,312 @@
-+/*
-+ * Watchdog driver for Atmel AT32AP700X devices
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+#define TIMEOUT_MIN 1
-+#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT
-+#define TIMEOUT_MAX 2
-+
-+/* Watchdog registers and write/read macro */
-+#define WDT_CTRL 0x00
-+#define WDT_CTRL_EN 0
-+#define WDT_CTRL_PSEL 8
-+#define WDT_CTRL_KEY 24
-+
-+#define WDT_CLR 0x04
-+
-+#define WDT_BIT(name) (1 << WDT_##name)
-+#define WDT_BF(name,value) ((value) << WDT_##name)
-+
-+#define wdt_readl(dev,reg) \
-+ __raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev,reg,value) \
-+ __raw_writel((value), (dev)->regs + WDT_##reg)
-+
-+struct wdt_at32ap700x {
-+ void __iomem *regs;
-+ int timeout;
-+ int users;
-+};
-+
-+static struct wdt_at32ap700x *wdt;
-+
-+/*
-+ * Disable the watchdog.
-+ */
-+static void inline at32_wdt_stop(void)
-+{
-+ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-+ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static void inline at32_wdt_start(void)
-+{
-+ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
-+
-+ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+ | WDT_BF(CTRL_PSEL, psel)
-+ | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+ | WDT_BF(CTRL_PSEL, psel)
-+ | WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static void inline at32_wdt_pat(void)
-+{
-+ wdt_writel(wdt, CLR, 0x42);
-+}
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(1, &wdt->users))
-+ return -EBUSY;
-+
-+ at32_wdt_start();
-+ return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
-+ * the watchdog is also disabled.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
-+{
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+ at32_wdt_stop();
-+#endif
-+ clear_bit(1, &wdt->users);
-+ return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
-+{
-+ /*
-+ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-+ * 2 ^ 16 allowing up to 2 seconds timeout.
-+ */
-+ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-+ return -EINVAL;
-+
-+ /* Set new watchdog time. It will be used when at32_wdt_start() is called. */
-+ wdt->timeout = time;
-+ return 0;
-+}
-+
-+static struct watchdog_info at32_wdt_info = {
-+ .identity = "at32ap700x watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int ret = -ENOTTY;
-+ int time;
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+
-+ switch(cmd) {
-+ case WDIOC_KEEPALIVE:
-+ at32_wdt_pat();
-+ ret = 0;
-+ break;
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user(argp, &at32_wdt_info,
-+ sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+ break;
-+ case WDIOC_SETTIMEOUT:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ ret = at32_wdt_settimeout(time);
-+ if (ret)
-+ break;
-+ /* Enable new time value */
-+ at32_wdt_start();
-+ /* fall through */
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt->timeout, p);
-+ break;
-+ case WDIOC_GETSTATUS: /* fall through */
-+ case WDIOC_GETBOOTSTATUS:
-+ ret = put_user(0, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ if (time & WDIOS_DISABLECARD)
-+ at32_wdt_stop();
-+ if (time & WDIOS_ENABLECARD)
-+ at32_wdt_start();
-+ ret = 0;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+ at32_wdt_pat();
-+ return len;
-+}
-+
-+static const struct file_operations at32_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .ioctl = at32_wdt_ioctl,
-+ .open = at32_wdt_open,
-+ .release = at32_wdt_close,
-+ .write = at32_wdt_write,
-+};
-+
-+static struct miscdevice at32_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &at32_wdt_fops,
-+};
-+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int ret;
-+
-+ wdt = kmalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-+ if (!wdt) {
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ pr_debug(KERN_ERR "wdt: no mmio resource defined for WDT\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ wdt->users = 0;
-+
-+ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
-+ at32_wdt_settimeout(TIMEOUT_MAX);
-+ pr_info("at32_wdt: timeout invalid, set to %d sec.\n",
-+ TIMEOUT_MAX);
-+ }
-+
-+ if (at32_wdt_miscdev.parent)
-+ return -EBUSY;
-+ at32_wdt_miscdev.parent = &pdev->dev;
-+
-+ ret = misc_register(&at32_wdt_miscdev);
-+ if (ret)
-+ return ret;
-+
-+ printk(KERN_INFO "Atmel WDT for AT32AP700X at %08lx\n",
-+ (unsigned long)wdt->regs);
-+ return 0;
-+
-+out:
-+ if (wdt)
-+ kfree(wdt);
-+ return ret;
-+}
-+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = misc_deregister(&at32_wdt_miscdev);
-+ if (!ret)
-+ at32_wdt_miscdev.parent = NULL;
-+
-+ if (wdt)
-+ kfree(wdt);
-+
-+ return ret;
-+}
-+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+ at32_wdt_stop();
-+}
-+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+ at32_wdt_stop();
-+ return 0;
-+}
-+
-+static int at32_wdt_resume(struct platform_device *pdev)
-+{
-+ if (wdt->users)
-+ at32_wdt_start();
-+ return 0;
-+}
-+#endif
-+
-+static struct platform_driver at32_wdt_driver = {
-+ .remove = __exit_p(at32_wdt_remove),
-+#ifdef CONFIG_PM
-+ .suspend = at32_wdt_suspend,
-+ .resume = at32_wdt_resume,
-+#endif
-+ .driver = {
-+ .name = "wdt",
-+ .owner = THIS_MODULE,
-+ },
-+ .shutdown = at32_wdt_shutdown,
-+};
-+
-+static int __init at32_wdt_init(void)
-+{
-+ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
-+}
-+module_init(at32_wdt_init);
-+
-+static void __exit at32_wdt_exit(void)
-+{
-+ platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index ece31d2..a77c24b 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -5,6 +5,26 @@
- menu "I2C Hardware Bus support"
- depends on I2C
-
-+config I2C_ATMELTWI
-+ tristate "Atmel TWI/I2C"
-+ depends on I2C
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality. Atmel's TWI is compatible with Philips' I2C
-+ protocol. If in doubt, say NO
-+
-+config I2C_ATMELTWI_BAUDRATE
-+ prompt "Atmel TWI baudrate"
-+ depends on I2C_ATMELTWI
-+ int
-+ default 100000
-+ help
-+ Set the TWI/I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
-+
- config I2C_ALI1535
- tristate "ALI 1535"
- depends on I2C && PCI
-@@ -102,6 +122,14 @@ config I2C_ELEKTOR
- This support is also available as a module. If so, the module
- will be called i2c-elektor.
-
-+config I2C_GPIO
-+ tristate "GPIO-based bitbanging I2C"
-+ depends on GENERIC_GPIO
-+ select I2C_ALGOBIT
-+ help
-+ This is a very simple bitbanging I2C driver utilizing the
-+ arch-neutral GPIO API to control the SCL and SDA lines.
-+
- config I2C_HYDRA
- tristate "CHRP Apple Hydra Mac I/O I2C interface"
- depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 290b540..604fe49 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
- obj-$(CONFIG_I2C_AT91) += i2c-at91.o
- obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
- obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
-+obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
- obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
- obj-$(CONFIG_I2C_I801) += i2c-i801.o
- obj-$(CONFIG_I2C_I810) += i2c-i810.o
-@@ -48,6 +49,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
-new file mode 100644
-index 0000000..8502ea6
---- /dev/null
-+++ b/drivers/i2c/busses/atmeltwi.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name,value))
-+
-+/* Register access macros */
-+#define twi_readl(port,reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
-new file mode 100644
-index 0000000..3418465
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,348 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
-+
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ spinlock_t lock;
-+ struct completion comp;
-+ u32 intmask;
-+ u8 *buf;
-+ u8 len;
-+ u8 acks_left;
-+ unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * Initialize the TWI hardware registers.
-+ */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
-+{
-+ unsigned long cdiv, ckdiv=0;
-+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
-+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
-+ }
-+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv)));
-+ return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
-+ */
-+static short twi_wait_for_completion(struct atmel_twi *twi,
-+ u32 mask)
-+{
-+ int timeout = msecs_to_jiffies(100);
-+
-+ twi->intmask = mask;
-+ init_completion(&twi->comp);
-+
-+ twi_writel(twi, IER, mask);
-+
-+ if(!wait_for_completion_timeout(&twi->comp, timeout))
-+ return -ETIMEDOUT;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ struct i2c_msg *pmsg;
-+ int i;
-+
-+ /* get first message */
-+ pmsg = msgs;
-+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+ for (i = 0; i < num; i++, pmsg++) {
-+
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+ if (pmsg->flags & I2C_M_RD) {
-+ twi_writel(twi, CR, TWI_BIT(START));
-+ if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) {
-+ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+
-+ /* Send Stop, and Wait until transfer is finished */
-+ if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) {
-+ dev_dbg(&adap->dev, "TXCOMP timeout\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) {
-+ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ }
-+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+ } /* end cur msg */
-+
-+ return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
-+
-+ if (twi->intmask & status){
-+ if (twi->intmask & TWI_BIT(NACK)) {
-+ goto nack;
-+ } else if (twi->intmask & TWI_BIT(RXRDY)){
-+ twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR);
-+ if(--twi->acks_left==1)
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ if (twi->acks_left==0)
-+ goto complete;
-+ } else if (twi->intmask & TWI_BIT(TXRDY)) {
-+ twi->acks_left--;
-+ if (twi->acks_left==0) {
-+ twi->intmask = TWI_BIT(TXCOMP);
-+ twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+ } else
-+ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
-+ } else if (twi->intmask & TWI_BIT(TXCOMP)) {
-+ goto complete;
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+
-+nack:
-+ printk(KERN_INFO "NACK received!\n");
-+
-+complete:
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
-+
-+ return IRQ_HANDLED;
-+
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
-+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_err(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
-+ }
-+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
-+
-+ irq = platform_get_irq(pdev,0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
-+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
-+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_HWMON;
-+ adapter->dev.parent = &pdev->dev;
-+
-+ platform_set_drvdata(pdev, twi);
-+
-+ rc = i2c_add_adapter(adapter);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
-+
-+ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
-+
-+ return 0;
-+
-+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+ free_irq(irq, twi);
-+
-+err_irq:
-+ iounmap(twi->regs);
-+
-+err_ioremap:
-+ kfree(twi);
-+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+
-+ return rc;
-+}
-+
-+static int __devexit twi_remove(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
-+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
-+
-+ return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+ .probe = twi_probe,
-+ .remove = __devexit_p(twi_remove),
-+ .driver = {
-+ .name = "atmel_twi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+ return platform_driver_register(&twi_driver);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+ platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
-new file mode 100644
-index 0000000..a7dd546
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-gpio.c
-@@ -0,0 +1,215 @@
-+/*
-+ * Bitbanging I2C bus driver using the GPIO API
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-bit.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/gpio.h>
-+
-+/* Toggle SDA by changing the direction of the pin */
-+static void i2c_gpio_setsda_dir(void *data, int state)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ if (state)
-+ gpio_direction_input(pdata->sda_pin);
-+ else
-+ gpio_direction_output(pdata->sda_pin, 0);
-+}
-+
-+/*
-+ * Toggle SDA by changing the output value of the pin. This is only
-+ * valid for pins configured as open drain (i.e. setting the value
-+ * high effectively turns off the output driver.)
-+ */
-+static void i2c_gpio_setsda_val(void *data, int state)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ gpio_set_value(pdata->sda_pin, state);
-+}
-+
-+/* Toggle SCL by changing the direction of the pin. */
-+static void i2c_gpio_setscl_dir(void *data, int state)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ if (state)
-+ gpio_direction_input(pdata->scl_pin);
-+ else
-+ gpio_direction_output(pdata->scl_pin, 0);
-+}
-+
-+/*
-+ * Toggle SCL by changing the output value of the pin. This is used
-+ * for pins that are configured as open drain and for output-only
-+ * pins. The latter case will break the i2c protocol, but it will
-+ * often work in practice.
-+ */
-+static void i2c_gpio_setscl_val(void *data, int state)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ gpio_set_value(pdata->scl_pin, state);
-+}
-+
-+int i2c_gpio_getsda(void *data)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ return gpio_get_value(pdata->sda_pin);
-+}
-+
-+int i2c_gpio_getscl(void *data)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ return gpio_get_value(pdata->scl_pin);
-+}
-+
-+static int __init i2c_gpio_probe(struct platform_device *pdev)
-+{
-+ struct i2c_gpio_platform_data *pdata;
-+ struct i2c_algo_bit_data *bit_data;
-+ struct i2c_adapter *adap;
-+ int ret;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata)
-+ return -ENXIO;
-+
-+ ret = -ENOMEM;
-+ adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
-+ if (!adap)
-+ goto err_alloc_adap;
-+ bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
-+ if (!bit_data)
-+ goto err_alloc_bit_data;
-+
-+ ret = gpio_request(pdata->sda_pin, "sda");
-+ if (ret)
-+ goto err_request_sda;
-+ ret = gpio_request(pdata->scl_pin, "scl");
-+ if (ret)
-+ goto err_request_scl;
-+
-+ if (pdata->sda_is_open_drain) {
-+ gpio_direction_output(pdata->sda_pin, 1);
-+ bit_data->setsda = i2c_gpio_setsda_val;
-+ } else {
-+ gpio_direction_input(pdata->sda_pin);
-+ bit_data->setsda = i2c_gpio_setsda_dir;
-+ }
-+
-+ if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
-+ gpio_direction_output(pdata->scl_pin, 1);
-+ bit_data->setscl = i2c_gpio_setscl_val;
-+ } else {
-+ gpio_direction_input(pdata->scl_pin);
-+ bit_data->setscl = i2c_gpio_setscl_dir;
-+ }
-+
-+ if (!pdata->scl_is_output_only)
-+ bit_data->getscl = i2c_gpio_getscl;
-+ bit_data->getsda = i2c_gpio_getsda;
-+
-+ if (pdata->udelay)
-+ bit_data->udelay = pdata->udelay;
-+ else if (pdata->scl_is_output_only)
-+ bit_data->udelay = 50; /* 10 kHz */
-+ else
-+ bit_data->udelay = 5; /* 100 kHz */
-+
-+ if (pdata->timeout)
-+ bit_data->timeout = pdata->timeout;
-+ else
-+ bit_data->timeout = HZ / 10; /* 100 ms */
-+
-+ bit_data->data = pdata;
-+
-+ adap->owner = THIS_MODULE;
-+ snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
-+ adap->algo_data = bit_data;
-+ adap->dev.parent = &pdev->dev;
-+
-+ ret = i2c_bit_add_bus(adap);
-+ if (ret)
-+ goto err_add_bus;
-+
-+ platform_set_drvdata(pdev, adap);
-+
-+ dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
-+ pdata->sda_pin, pdata->scl_pin,
-+ pdata->scl_is_output_only
-+ ? ", no clock stretching" : "");
-+
-+ return 0;
-+
-+err_add_bus:
-+ gpio_free(pdata->scl_pin);
-+err_request_scl:
-+ gpio_free(pdata->sda_pin);
-+err_request_sda:
-+ kfree(bit_data);
-+err_alloc_bit_data:
-+ kfree(adap);
-+err_alloc_adap:
-+ return ret;
-+}
-+
-+static int __exit i2c_gpio_remove(struct platform_device *pdev)
-+{
-+ struct i2c_gpio_platform_data *pdata;
-+ struct i2c_adapter *adap;
-+
-+ adap = platform_get_drvdata(pdev);
-+ pdata = pdev->dev.platform_data;
-+
-+ i2c_del_adapter(adap);
-+ gpio_free(pdata->scl_pin);
-+ gpio_free(pdata->sda_pin);
-+ kfree(adap->algo_data);
-+ kfree(adap);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver i2c_gpio_driver = {
-+ .driver = {
-+ .name = "i2c-gpio",
-+ .owner = THIS_MODULE,
-+ },
-+ .remove = __exit_p(i2c_gpio_remove),
-+};
-+
-+static int __init i2c_gpio_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
-+ if (ret)
-+ printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
-+
-+ return ret;
-+}
-+module_init(i2c_gpio_init);
-+
-+static void __exit i2c_gpio_exit(void)
-+{
-+ platform_driver_unregister(&i2c_gpio_driver);
-+}
-+module_exit(i2c_gpio_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
-index 35d998c..a3c7057 100644
---- a/drivers/input/mouse/Kconfig
-+++ b/drivers/input/mouse/Kconfig
-@@ -125,4 +125,19 @@ config MOUSE_HIL
- help
- Say Y here to support HIL pointers.
-
-+config MOUSE_GPIO
-+ tristate "GPIO mouse"
-+ depends on GENERIC_GPIO
-+ help
-+ This driver simulates a mouse on GPIO lines of various CPUs (and some
-+ other chips).
-+
-+ Say Y here if your device has buttons or a simple joystick connected
-+ directly to GPIO lines. Your board-specific setup logic must also
-+ provide a platform device and platform data saying which GPIOs are
-+ used.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called gpio_mouse.
-+
- endif
-diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
-index 21a1de6..5d0fc43 100644
---- a/drivers/input/mouse/Makefile
-+++ b/drivers/input/mouse/Makefile
-@@ -13,5 +13,6 @@ obj-$(CONFIG_MOUSE_PS2) += psmouse.o
- obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
- obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
- obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
-+obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
-
- psmouse-objs := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o trackpoint.o
-diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
-new file mode 100644
-index 0000000..b7c438e
---- /dev/null
-+++ b/drivers/input/mouse/gpio_mouse.c
-@@ -0,0 +1,305 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/jiffies.h>
-+#include <linux/platform_device.h>
-+#include <linux/input.h>
-+#include <linux/gpio_mouse.h>
-+
-+#include <asm/gpio.h>
-+
-+struct gpio_mouse {
-+ struct input_dev *input;
-+ struct gpio_mouse_platform_data *gpio;
-+ struct timer_list timer;
-+};
-+
-+/*
-+ * Timer function which is run every scan_ms ms when the device is opened. The
-+ * dev input varaible is set to the the input_dev pointer.
-+ */
-+static void gpio_mouse_scan(unsigned long _dev)
-+{
-+ struct input_dev *input = (struct input_dev *)_dev;
-+ struct gpio_mouse *gmouse = input->private;
-+ struct gpio_mouse_platform_data *gpio = gmouse->gpio;
-+ int x, y;
-+
-+ if (gpio->bleft >= 0)
-+ input_report_key(input, BTN_LEFT,
-+ gpio_get_value(gpio->bleft) ^ gpio->polarity);
-+ if (gpio->bmiddle >= 0)
-+ input_report_key(input, BTN_MIDDLE,
-+ gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
-+ if (gpio->bright >= 0)
-+ input_report_key(input, BTN_RIGHT,
-+ gpio_get_value(gpio->bright) ^ gpio->polarity);
-+
-+ x = (gpio_get_value(gpio->right) ^ gpio->polarity)
-+ - (gpio_get_value(gpio->left) ^ gpio->polarity);
-+ y = (gpio_get_value(gpio->down) ^ gpio->polarity)
-+ - (gpio_get_value(gpio->up) ^ gpio->polarity);
-+
-+ input_report_rel(input, REL_X, x);
-+ input_report_rel(input, REL_Y, y);
-+ input_sync(input);
-+
-+ mod_timer(&gmouse->timer, jiffies + msecs_to_jiffies(gpio->scan_ms));
-+}
-+
-+/* Only start the timer when the device is actually in use, i.e. opened. */
-+static int gpio_mouse_open(struct input_dev *input)
-+{
-+ struct gpio_mouse *gmouse = input->private;
-+ struct gpio_mouse_platform_data *gpio = gmouse->gpio;
-+ gmouse->timer.expires = jiffies + msecs_to_jiffies(gpio->scan_ms);
-+ gmouse->timer.data = (unsigned long)input;
-+ add_timer(&gmouse->timer);
-+ return 0;
-+}
-+
-+static void gpio_mouse_close(struct input_dev *input)
-+{
-+ struct gpio_mouse *gmouse = input->private;
-+ del_timer_sync(&gmouse->timer);
-+}
-+
-+static int __init gpio_mouse_probe(struct platform_device *pdev)
-+{
-+ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_mouse *gmouse;
-+ struct input_dev *input;
-+ int ret;
-+
-+ if (!pdata) {
-+ dev_dbg(&pdev->dev, "no platform data\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ if (pdata->up < 0 || pdata->down < 0 || pdata->right < 0
-+ || pdata->left < 0) {
-+ dev_dbg(&pdev->dev, "missing GPIO for directions\n");
-+ ret = -EINVAL;
-+ goto out;
-+ }
-+ if (pdata->scan_ms < 0) {
-+ dev_dbg(&pdev->dev, "invalid scan time\n");
-+ ret = -EINVAL;
-+ goto out;
-+ }
-+
-+ gmouse = kzalloc(sizeof(struct gpio_mouse), GFP_KERNEL);
-+ if (!gmouse) {
-+ dev_dbg(&pdev->dev, "not enought memory for gpio_mouse\n");
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ /* Mouse direction, required. */
-+ ret = gpio_request(pdata->up, "gpio_mouse_up");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail up pin\n");
-+ goto out_gpio_up;
-+ }
-+ ret = gpio_request(pdata->down, "gpio_mouse_down");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail down pin\n");
-+ goto out_gpio_down;
-+ }
-+ ret = gpio_request(pdata->left, "gpio_mouse_left");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail left pin\n");
-+ goto out_gpio_left;
-+ }
-+ ret = gpio_request(pdata->right, "gpio_mouse_right");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail right pin\n");
-+ goto out_gpio_right;
-+ }
-+
-+ gpio_direction_input(pdata->up);
-+ gpio_direction_input(pdata->down);
-+ gpio_direction_input(pdata->left);
-+ gpio_direction_input(pdata->right);
-+
-+ /* Mouse buttons, not required, but should at least have bleft. */
-+ if (pdata->bleft >= 0) {
-+ ret = gpio_request(pdata->bleft, "gpio_mouse_bleft");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail bleft pin\n");
-+ goto out_gpio_bleft;
-+ }
-+ gpio_direction_input(pdata->bleft);
-+ } else {
-+ dev_dbg(&pdev->dev, "no left button defined\n");
-+ }
-+ if (pdata->bmiddle >= 0) {
-+ ret = gpio_request(pdata->bmiddle, "gpio_mouse_bmiddle");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail bmiddle pin\n");
-+ goto out_gpio_bmiddle;
-+ }
-+ gpio_direction_input(pdata->bmiddle);
-+ }
-+ if (pdata->bright >= 0) {
-+ ret = gpio_request(pdata->bright, "gpio_mouse_bright");
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "fail bright pin\n");
-+ goto out_gpio_bright;
-+ }
-+ gpio_direction_input(pdata->bright);
-+ }
-+
-+ input = input_allocate_device();
-+ if (!input) {
-+ dev_dbg(&pdev->dev, "not enough memory for input device\n");
-+ ret = -ENOMEM;
-+ goto out_input_allocate;
-+ }
-+
-+ platform_set_drvdata(pdev, input);
-+
-+ input->name = pdev->name;
-+ /* TODO: change to "input->dev.parent = &pdev->dev;" in the future */
-+ input->cdev.dev = &pdev->dev;
-+ input->private = gmouse;
-+
-+ input->id.bustype = BUS_HOST;
-+ input->id.vendor = 0;
-+ input->id.product = 0;
-+ input->id.version = 0;
-+
-+ input->evbit[0] = BIT(EV_REL);
-+ if (pdata->bleft >= 0 || pdata->bmiddle >= 0 || pdata->bright >= 0) {
-+ input->evbit[0] |= BIT(EV_KEY);
-+
-+ if (pdata->bleft >= 0)
-+ input->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT);
-+ if (pdata->bmiddle >= 0)
-+ input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_MIDDLE);
-+ if (pdata->bright >= 0)
-+ input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT);
-+ }
-+ input->relbit[0] = BIT(REL_X) | BIT(REL_Y);
-+
-+ input->open = gpio_mouse_open;
-+ input->close = gpio_mouse_close;
-+
-+ gmouse->gpio = pdata;
-+ gmouse->input = input;
-+
-+ /* Init the scan timer. TODO: rewrite to use input-polldev in the future */
-+ init_timer(&gmouse->timer);
-+ gmouse->timer.function = gpio_mouse_scan;
-+
-+ ret = input_register_device(input);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not register input device\n");
-+ goto out_reg_dev;
-+ }
-+
-+ dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
-+ pdata->scan_ms,
-+ pdata->bleft < 0 ? "" : "left ",
-+ pdata->bmiddle < 0 ? "" : "middle ",
-+ pdata->bright < 0 ? "" : "right");
-+
-+ return 0;
-+
-+out_reg_dev:
-+ input_free_device(input);
-+ platform_set_drvdata(pdev, NULL);
-+out_input_allocate:
-+ if (pdata->bright >= 0)
-+ gpio_free(pdata->bright);
-+out_gpio_bright:
-+ if (pdata->bmiddle >= 0)
-+ gpio_free(pdata->bmiddle);
-+out_gpio_bmiddle:
-+ if (pdata->bleft >= 0)
-+ gpio_free(pdata->bleft);
-+out_gpio_bleft:
-+ if (pdata->right >= 0)
-+ gpio_free(pdata->right);
-+out_gpio_right:
-+ if (pdata->left >= 0)
-+ gpio_free(pdata->left);
-+out_gpio_left:
-+ if (pdata->down >= 0)
-+ gpio_free(pdata->down);
-+out_gpio_down:
-+ if (pdata->up >= 0)
-+ gpio_free(pdata->up);
-+out_gpio_up:
-+ kfree(gmouse);
-+out:
-+ return ret;
-+}
-+
-+static int __exit gpio_mouse_remove(struct platform_device *pdev)
-+{
-+ struct input_dev *input = platform_get_drvdata(pdev);
-+ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_mouse *gmouse = input->private;
-+
-+ if (input)
-+ input_unregister_device(input);
-+
-+ if (pdata->up >= 0)
-+ gpio_free(pdata->up);
-+ if (pdata->down >= 0)
-+ gpio_free(pdata->down);
-+ if (pdata->left >= 0)
-+ gpio_free(pdata->left);
-+ if (pdata->right >= 0)
-+ gpio_free(pdata->right);
-+ if (pdata->bleft >= 0)
-+ gpio_free(pdata->bleft);
-+ if (pdata->bmiddle >= 0)
-+ gpio_free(pdata->bmiddle);
-+ if (pdata->bright >= 0)
-+ gpio_free(pdata->bright);
-+
-+ if (gmouse)
-+ kfree(gmouse);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+struct platform_driver gpio_mouse_device_driver = {
-+ .remove = __exit_p(gpio_mouse_remove),
-+ .driver = {
-+ .name = "gpio_mouse",
-+ }
-+};
-+
-+static int __init gpio_mouse_init(void)
-+{
-+ return platform_driver_probe(&gpio_mouse_device_driver,
-+ gpio_mouse_probe);
-+}
-+module_init(gpio_mouse_init);
-+
-+static void __exit gpio_mouse_exit(void)
-+{
-+ platform_driver_unregister(&gpio_mouse_device_driver);
-+}
-+module_exit(gpio_mouse_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("GPIO mouse driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 80b199f..b6fb03b 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -122,4 +122,16 @@ config SONY_LAPTOP
-
- Read <file:Documentation/sony-laptop.txt> for more information.
-
-+config ATMEL_SSC
-+ tristate "Device driver for Atmel SSC peripheral"
-+ depends on AVR32 || ARCH_AT91
-+ ---help---
-+ This option enables device driver support for Atmel Syncronized
-+ Serial Communication peripheral (SSC).
-+
-+ The SSC peripheral supports a wide variety of serial frame based
-+ communications, i.e. I2S, SPI, etc.
-+
-+ If unsure, say N.
-+
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index 7793ccd..03bb556 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
- obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
- obj-$(CONFIG_SGI_IOC4) += ioc4.o
- obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
-+obj-$(CONFIG_ATMEL_SSC) += atmel-ssc/
-diff --git a/drivers/misc/atmel-ssc/Makefile b/drivers/misc/atmel-ssc/Makefile
-new file mode 100644
-index 0000000..8c45446
---- /dev/null
-+++ b/drivers/misc/atmel-ssc/Makefile
-@@ -0,0 +1,3 @@
-+
-+obj-$(CONFIG_ATMEL_SSC) := ssc.o
-+
-diff --git a/drivers/misc/atmel-ssc/ssc.c b/drivers/misc/atmel-ssc/ssc.c
-new file mode 100644
-index 0000000..a13bd6f
---- /dev/null
-+++ b/drivers/misc/atmel-ssc/ssc.c
-@@ -0,0 +1,471 @@
-+/*
-+ * Atmel SSC support
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/ssc.h>
-+#include <linux/err.h>
-+#include <linux/mutex.h>
-+
-+#include <asm/io.h>
-+
-+#define MAX_NR_SSC_DEVICES 4
-+
-+DEFINE_MUTEX(user_mutex);
-+
-+static struct ssc_device ssc_dev[MAX_NR_SSC_DEVICES];
-+
-+/* SSC API */
-+
-+struct ssc_device* ssc_request(unsigned int ssc_num)
-+{
-+ struct ssc_device *ssc;
-+
-+ ssc = &ssc_dev[ssc_num];
-+ if (!ssc)
-+ return ERR_PTR(-ENODEV);
-+
-+ /* Lock, check if we are taken and return BUSY if taken */
-+ mutex_lock(&user_mutex);
-+ if (ssc->user) {
-+ mutex_unlock(&user_mutex);
-+ printk(KERN_ERR
-+ "%s: attempted to request taken ssc%u module\n",
-+ ssc->name, ssc_num);
-+ return ERR_PTR(-EBUSY);
-+ }
-+ ssc->user++;
-+ mutex_unlock(&user_mutex);
-+
-+ /* turn on the module */
-+ clk_enable(ssc->clk);
-+
-+ return ssc;
-+}
-+EXPORT_SYMBOL(ssc_request);
-+
-+void ssc_free(struct ssc_device *ssc)
-+{
-+ mutex_lock(&user_mutex);
-+ if (ssc->user) {
-+ ssc->user--;
-+ /* turn off the module */
-+ clk_disable(ssc->clk);
-+ } else {
-+ printk(KERN_WARNING
-+ "%s: attempted to free already free ssc module\n",
-+ ssc->name);
-+ }
-+ mutex_unlock(&user_mutex);
-+}
-+EXPORT_SYMBOL(ssc_free);
-+
-+int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode)
-+{
-+ ssc_writel(ssc, CR, SSC_BIT(CR_SWRST));
-+
-+ if (!mode)
-+ return -EINVAL;
-+ if (mode->bauddiv % 2)
-+ return -EINVAL; /* not power of 2 */
-+
-+ switch (mode->mode) {
-+ case ATMEL_SSC_MODE_I2S_MASTER:
-+ if (mode->data_length % 2)
-+ return -EINVAL; /* not power of 2 */
-+
-+ ssc_writel(ssc, CMR, (mode->bauddiv / 2));
-+
-+ /* Continous clock output
-+ * Starts on falling TF
-+ * Delay 1 cycle (1 bit)
-+ */
-+ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 1)
-+ | SSC_BF(TCMR_START, 4)
-+ | SSC_BF(TCMR_STTDLY, 1)
-+ | SSC_BF(TCMR_PERIOD,
-+ (mode->data_length-1)));
-+ /* Transmitt MSB first
-+ * Transmit 2 words each transfer
-+ * Frame starts on negative pulse
-+ */
-+ ssc_writel(ssc, TFMR,
-+ SSC_BF(TFMR_DATLEN,
-+ (mode->data_length-1))
-+ | SSC_BIT(TFMR_MSBF)
-+ | SSC_BF(TFMR_DATNB, 1)
-+ | SSC_BF(TFMR_FSLEN,
-+ (mode->data_length-1))
-+ | SSC_BF(TFMR_FSOS, 1));
-+ /* Use transmitter clock
-+ * Invert clock
-+ * Start on any edge on RF
-+ * Delay 1 cycle (1 bit)
-+ */
-+ ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 1)
-+ | SSC_BIT(RCMR_CKI)
-+ | SSC_BF(RCMR_START, 7)
-+ | SSC_BF(RCMR_STTDLY, 1));
-+ /* Receive MSB first */
-+ ssc_writel(ssc, RFMR,
-+ SSC_BF(RFMR_DATLEN, (mode->data_length-1))
-+ | SSC_BIT(RFMR_MSBF));
-+ break;
-+ case ATMEL_SSC_MODE_I2S_SLAVE:
-+ if (mode->data_length % 2)
-+ return -EINVAL; /* not power of 2 */
-+
-+ ssc_writel(ssc, CMR, 0);
-+
-+ /* Continous clock input on TK
-+ * Starts on any TF edge
-+ * Delay 1 cycle (1 bit)
-+ */
-+ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKS, 2)
-+ | SSC_BF(TCMR_START, 7)
-+ | SSC_BF(TCMR_STTDLY, 1));
-+ /* Transmitt MSB first
-+ * Transmit 2 words each transfer
-+ * Frame starts on negative pulse
-+ */
-+ ssc_writel(ssc, TFMR,
-+ SSC_BF(TFMR_DATLEN,
-+ (mode->data_length-1))
-+ | SSC_BIT(TFMR_MSBF)
-+ | SSC_BF(TFMR_DATNB, 1)
-+ | SSC_BF(TFMR_FSLEN,
-+ (mode->data_length-1))
-+ | SSC_BF(TFMR_FSOS, 1));
-+ /* Continous clock input on RK
-+ * Start on any RF edge
-+ * Delay 1 cycle (1 bit)
-+ */
-+ ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 2)
-+ | SSC_BF(RCMR_START, 7)
-+ | SSC_BF(RCMR_STTDLY, 1));
-+ /* Receive MSB first */
-+ ssc_writel(ssc, RFMR,
-+ SSC_BF(RFMR_DATLEN, (mode->data_length-1))
-+ | SSC_BIT(RFMR_MSBF));
-+ break;
-+ case ATMEL_SSC_MODE_SPI_MASTER:
-+ if (mode->data_length < 8 || mode->data_length > 16)
-+ return -EINVAL;
-+
-+ ssc_writel(ssc, CMR, (mode->bauddiv / 2));
-+
-+ /* Clock during xfer
-+ * Invert depending on SPI mode
-+ * Continous clock gating
-+ */
-+ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 2)
-+ | SSC_BF(TCMR_CKI, (mode->spi_mode % 2) ? 0 : 1)
-+ | SSC_BF(TCMR_CKG, 1));
-+ /* Transmitt MSB first
-+ * Frame starts on negative edge
-+ */
-+ ssc_writel(ssc, TFMR,
-+ SSC_BF(TFMR_DATLEN, (mode->data_length-1))
-+ | SSC_BIT(TFMR_MSBF)
-+ | SSC_BF(TFMR_FSOS, 3));
-+ /* Invert depending on SPI mode
-+ * Start receive on transmitt
-+ */
-+ ssc_writel(ssc, RCMR,
-+ SSC_BF(RCMR_CKI, (mode->spi_mode % 2) ? 0 : 1)
-+ | SSC_BF(RCMR_START, 1));
-+ /* Reveice MSB first */
-+ ssc_writel(ssc, RFMR,
-+ SSC_BF(RFMR_DATLEN, (mode->data_length-1))
-+ | SSC_BIT(RFMR_MSBF));
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_set_mode);
-+
-+int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+ if (xfer->data) {
-+ ssc_writel(ssc, PDC_RPR, xfer->data);
-+ ssc_writel(ssc, PDC_RCR, xfer->len);
-+ }
-+ if (xfer->next_data) {
-+ ssc_writel(ssc, PDC_RNPR, xfer->next_data);
-+ ssc_writel(ssc, PDC_RNCR, xfer->next_len);
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_set_rx_buffers);
-+
-+int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+ xfer->data = ssc_readl(ssc, PDC_RPR);
-+ xfer->len = ssc_readl(ssc, PDC_RCR);
-+ xfer->next_data = ssc_readl(ssc, PDC_RNPR);
-+ xfer->next_len = ssc_readl(ssc, PDC_RNCR);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_get_rx_buffers);
-+
-+int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+ if (xfer->data) {
-+ ssc_writel(ssc, PDC_TPR, xfer->data);
-+ ssc_writel(ssc, PDC_TCR, xfer->len);
-+ }
-+ if (xfer->next_data) {
-+ ssc_writel(ssc, PDC_TNPR, xfer->next_data);
-+ ssc_writel(ssc, PDC_TNCR, xfer->next_len);
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_set_tx_buffers);
-+
-+int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+ xfer->data = ssc_readl(ssc, PDC_TPR);
-+ xfer->len = ssc_readl(ssc, PDC_TCR);
-+ xfer->next_data = ssc_readl(ssc, PDC_TNPR);
-+ xfer->next_len = ssc_readl(ssc, PDC_TNCR);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_get_tx_buffers);
-+
-+int ssc_enable(struct ssc_device *ssc, char tx, char rx)
-+{
-+ if (tx && rx) {
-+ ssc_writel(ssc, CR, SSC_BIT(CR_TXEN)|SSC_BIT(CR_RXEN));
-+ }
-+ else if (tx) {
-+ ssc_writel(ssc, CR, SSC_BIT(CR_TXEN));
-+ }
-+ else if (rx) {
-+ ssc_writel(ssc, CR, SSC_BIT(CR_RXEN));
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_enable);
-+
-+int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx)
-+{
-+ if (tx && rx) {
-+ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN)|SSC_BIT(PDC_PTCR_RXTEN));
-+ }
-+ else if (tx) {
-+ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+ }
-+ else if (rx) {
-+ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTEN));
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_enable_xfer);
-+
-+int ssc_disable(struct ssc_device *ssc, char tx, char rx)
-+{
-+ if (tx && rx) {
-+ ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS)|SSC_BIT(CR_RXDIS));
-+ }
-+ else if (tx) {
-+ ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS));
-+ }
-+ else if (rx) {
-+ ssc_writel(ssc, CR, SSC_BIT(CR_RXDIS));
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_disable);
-+
-+int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx)
-+{
-+ if (tx && rx) {
-+ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS)|SSC_BIT(PDC_PTCR_RXTDIS));
-+ }
-+ else if (tx) {
-+ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+ }
-+ else if (rx) {
-+ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTDIS));
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_disable_xfer);
-+
-+int ssc_enable_int(struct ssc_device *ssc, unsigned int mask)
-+{
-+ long status;
-+
-+ ssc_writel(ssc, IER, mask);
-+
-+ status = ssc_readl(ssc, IMR);
-+
-+ if (!(status & mask))
-+ return -EFAULT;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_enable_int);
-+
-+int ssc_disable_int(struct ssc_device *ssc, unsigned int mask)
-+{
-+ long status;
-+
-+ ssc_writel(ssc, IDR, mask);
-+
-+ status = ssc_readl(ssc, IMR);
-+
-+ if (status ^ ~mask)
-+ return -EFAULT;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_disable_int);
-+
-+int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask)
-+{
-+ *mask = ssc_readl(ssc, IMR);
-+ return 0;
-+}
-+EXPORT_SYMBOL(ssc_get_int_mask);
-+
-+int ssc_clk_get_rate(struct ssc_device *ssc)
-+{
-+ return clk_get_rate(ssc->clk);
-+}
-+EXPORT_SYMBOL(ssc_clk_get_rate);
-+
-+int ssc_to_irq(struct ssc_device *ssc)
-+{
-+ return ssc->irq;
-+}
-+EXPORT_SYMBOL(ssc_to_irq);
-+
-+struct ssc_device* irq_to_ssc(unsigned int irq)
-+{
-+ int i;
-+ struct ssc_device *ssc;
-+
-+ for (i = 0; i < MAX_NR_SSC_DEVICES; i++) {
-+ ssc = &ssc_dev[i];
-+ if (ssc && ssc->irq == irq)
-+ return ssc;
-+ }
-+
-+ return ERR_PTR(-ENXIO);
-+}
-+EXPORT_SYMBOL(irq_to_ssc);
-+
-+/* End SSC API */
-+
-+static int __init ssc_probe(struct platform_device *pdev)
-+{
-+ int retval = 0;
-+ struct resource *regs;
-+ struct ssc_device *ssc = NULL;
-+
-+ if (pdev->id > MAX_NR_SSC_DEVICES) {
-+ dev_err(&pdev->dev, "only %d SSC devices supported\n",
-+ MAX_NR_SSC_DEVICES);
-+ retval = -ENODEV;
-+ goto out;
-+ }
-+
-+ ssc = &ssc_dev[pdev->id];
-+ ssc->user = 0;
-+ snprintf(ssc->name, sizeof(ssc->name), "ssc%d", pdev->id);
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "no mmio resource defined for %s\n",
-+ ssc->name);
-+ retval = -ENXIO;
-+ goto out;
-+ }
-+
-+ ssc->clk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(ssc->clk)) {
-+ dev_err(&pdev->dev, "no pclk clock defined for %s\n",
-+ ssc->name);
-+ retval = -ENXIO;
-+ goto out;
-+ }
-+
-+ ssc->pdev = pdev;
-+ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+
-+ mutex_init(&user_mutex);
-+
-+ /* disable all interrupts */
-+ ssc_writel(ssc, IDR, ~0UL);
-+ ssc_readl(ssc, SR);
-+
-+ ssc->irq = platform_get_irq(pdev, 0);
-+ if (!ssc->irq) {
-+ printk(KERN_ERR "%s: no interrupt for module\n", ssc->name);
-+ retval = -ENXIO;
-+ goto out_unmap;
-+ }
-+
-+ platform_set_drvdata(pdev, ssc);
-+
-+ printk(KERN_INFO "%s: Atmel SSC module at 0x%08lx (irq %d)\n",
-+ ssc->name, (unsigned long)ssc->regs, ssc->irq);
-+
-+ goto out;
-+
-+out_unmap:
-+ iounmap(ssc->regs);
-+out:
-+ return retval;
-+}
-+
-+static int __devexit ssc_remove(struct platform_device *pdev)
-+{
-+ struct ssc_device *ssc = platform_get_drvdata(pdev);
-+
-+ if (ssc && ssc->regs)
-+ iounmap(ssc->regs);
-+ if (ssc && ssc->clk)
-+ clk_put(ssc->clk);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ssc_driver = {
-+ .remove = __devexit_p(ssc_remove),
-+ .driver = {
-+ .name = "ssc",
-+ },
-+};
-+
-+static int __init ssc_init(void)
-+{
-+ return platform_driver_probe(&ssc_driver, ssc_probe);
-+}
-+
-+static void __exit ssc_exit(void)
-+{
-+ platform_driver_unregister(&ssc_driver);
-+}
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for AVR32 capable of I2S and SPI master (todo)");
-+MODULE_LICENSE("GPL");
-+
-+module_init(ssc_init);
-+module_exit(ssc_exit);
-diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
-index 12af9c7..6514159 100644
---- a/drivers/mmc/Kconfig
-+++ b/drivers/mmc/Kconfig
-@@ -71,6 +71,16 @@ config MMC_OMAP
-
- If unsure, say N.
-
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
-+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
-+
-+ If unsure, say N.
-+
- config MMC_WBSD
- tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on MMC && ISA_DMA_API
-diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
-index 83ffb93..caf30e0 100644
---- a/drivers/mmc/Makefile
-+++ b/drivers/mmc/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
-
- mmc_core-y := mmc.o mmc_sysfs.o
-diff --git a/drivers/mmc/atmel-mci.c b/drivers/mmc/atmel-mci.c
-new file mode 100644
-index 0000000..ebeab32
---- /dev/null
-+++ b/drivers/mmc/atmel-mci.c
-@@ -0,0 +1,1218 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/protocol.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \
-+ MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \
-+ MCI_BIT(RTOE))
-+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
-+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+ EVENT_CMD_COMPLETE = 0,
-+ EVENT_CMD_ERROR,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+ EVENT_STOP_SENT,
-+ EVENT_STOP_COMPLETE,
-+ EVENT_STOP_ERROR,
-+ EVENT_DMA_ERROR,
-+ EVENT_CARD_DETECT,
-+};
-+
-+struct atmel_mci_dma {
-+ struct dma_request_sg req;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+ struct mmc_host *mmc;
-+ void __iomem *regs;
-+ struct atmel_mci_dma dma;
-+
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+
-+ u32 stop_cmdr;
-+ u32 stop_iflags;
-+
-+ struct tasklet_struct tasklet;
-+ unsigned long pending_events;
-+ unsigned long completed_events;
-+ u32 error_status;
-+
-+ int present;
-+ int detect_pin;
-+ int wp_pin;
-+
-+ unsigned long bus_hz;
-+ unsigned long mapbase;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+ struct dentry *debugfs_req;
-+ struct dentry *debugfs_pending_events;
-+ struct dentry *debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host) \
-+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_cmd_error_is_complete(host) \
-+ test_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_data_is_complete(host) \
-+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host) \
-+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host) \
-+ test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host) \
-+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_stop_error_is_complete(host) \
-+ test_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_dma_error_is_complete(host) \
-+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host) \
-+ test_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host) \
-+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host) \
-+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_complete(host) \
-+ set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_complete(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host) \
-+ set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_complete(host) \
-+ set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_complete(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_cmd_error_pending(host) \
-+ set_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_set_data_pending(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host) \
-+ set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_stop_error_pending(host) \
-+ set_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_set_dma_error_pending(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host) \
-+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_pending(host) \
-+ clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_pending(host) \
-+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host) \
-+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host) \
-+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host) \
-+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_pending(host) \
-+ clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_pending(host) \
-+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host) \
-+ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+ unsigned int nbytes;
-+ char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd, *stop;
-+ struct mmc_data *data;
-+ struct req_dbg_data *priv;
-+ char *str;
-+ unsigned long n = 0;
-+
-+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ str = priv->str;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ mrq = host->mrq;
-+ if (mrq) {
-+ cmd = mrq->cmd;
-+ data = mrq->data;
-+ stop = mrq->stop;
-+ n = snprintf(str, DBG_REQ_BUF_SIZE,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ cmd->opcode, cmd->arg, cmd->flags,
-+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+ cmd->resp[3], cmd->error);
-+ if (n < DBG_REQ_BUF_SIZE && data)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "DATA %u * %u (%u) %x (err %u)\n",
-+ data->blocks, data->blksz,
-+ data->bytes_xfered, data->flags,
-+ data->error);
-+ if (n < DBG_REQ_BUF_SIZE && stop)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ stop->opcode, stop->arg, stop->flags,
-+ stop->resp[0], stop->resp[1],
-+ stop->resp[2], stop->resp[3],
-+ stop->error);
-+ }
-+ spin_unlock_irq(&host->mmc->lock);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+ file->private_data = priv;
-+
-+ return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct req_dbg_data *priv = file->private_data;
-+
-+ return simple_read_from_buffer(buf, nbytes, ppos,
-+ priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = req_dbg_open,
-+ .llseek = no_llseek,
-+ .read = req_dbg_read,
-+ .release = req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(host->regs + i * 4);
-+ spin_unlock_irq(&host->mmc->lock);
-+
-+ file->private_data = data;
-+ ret = 0;
-+
-+out:
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
-+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+ struct mmc_host *mmc;
-+ struct dentry *root, *regs;
-+ struct resource *res;
-+
-+ mmc = host->mmc;
-+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ host->debugfs_root = root;
-+
-+ regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+ regs->d_inode->i_size = res->end - res->start + 1;
-+ host->debugfs_regs = regs;
-+
-+ host->debugfs_req = debugfs_create_file("req", 0400, root,
-+ host, &req_dbg_fops);
-+ if (!host->debugfs_req)
-+ goto err_req;
-+
-+ host->debugfs_pending_events
-+ = debugfs_create_u32("pending_events", 0400, root,
-+ (u32 *)&host->pending_events);
-+ if (!host->debugfs_pending_events)
-+ goto err_pending_events;
-+
-+ host->debugfs_completed_events
-+ = debugfs_create_u32("completed_events", 0400, root,
-+ (u32 *)&host->completed_events);
-+ if (!host->debugfs_completed_events)
-+ goto err_completed_events;
-+
-+ return;
-+
-+err_completed_events:
-+ debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+ debugfs_remove(host->debugfs_req);
-+err_req:
-+ debugfs_remove(host->debugfs_regs);
-+err_regs:
-+ debugfs_remove(host->debugfs_root);
-+err_root:
-+ host->debugfs_root = NULL;
-+ dev_err(&host->pdev->dev,
-+ "failed to initialize debugfs for %s\n",
-+ mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+ if (host->debugfs_root) {
-+ debugfs_remove(host->debugfs_completed_events);
-+ debugfs_remove(host->debugfs_pending_events);
-+ debugfs_remove(host->debugfs_req);
-+ debugfs_remove(host->debugfs_regs);
-+ debugfs_remove(host->debugfs_root);
-+ host->debugfs_root = NULL;
-+ }
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+ unsigned int ns)
-+{
-+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+ struct mmc_data *data)
-+{
-+ static unsigned dtomul_to_shift[] = {
-+ 0, 4, 7, 8, 10, 12, 16, 20
-+ };
-+ unsigned timeout;
-+ unsigned dtocyc, dtomul;
-+
-+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+ for (dtomul = 0; dtomul < 8; dtomul++) {
-+ unsigned shift = dtomul_to_shift[dtomul];
-+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+ if (dtocyc < 15)
-+ break;
-+ }
-+
-+ if (dtomul >= 8) {
-+ dtomul = 7;
-+ dtocyc = 15;
-+ }
-+
-+ pr_debug("%s: setting timeout to %u cycles\n",
-+ mmc_hostname(host->mmc),
-+ dtocyc << dtomul_to_shift[dtomul]);
-+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+ | MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with interrupt flags to be handled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+ struct mmc_command *cmd,
-+ u32 *cmd_flags)
-+{
-+ u32 cmdr;
-+ u32 iflags;
-+
-+ cmd->error = MMC_ERR_NONE;
-+
-+ cmdr = 0;
-+ BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
-+ cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ if (cmd->flags & MMC_RSP_136)
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+ else
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+ }
-+
-+ /*
-+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+ * it's too difficult to determine whether this is an ACMD or
-+ * not. Better make it 64.
-+ */
-+ cmdr |= MCI_BIT(MAXLAT);
-+
-+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+ cmdr |= MCI_BIT(OPDCMD);
-+
-+ iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
-+ if (!(cmd->flags & MMC_RSP_CRC))
-+ iflags &= ~MCI_BIT(RCRCE);
-+
-+ pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+ mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
-+ (unsigned long)cmdr);
-+
-+ *cmd_flags = cmdr;
-+ return iflags;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+ struct mmc_command *cmd,
-+ u32 cmd_flags)
-+{
-+ WARN_ON(host->cmd);
-+ host->cmd = cmd;
-+
-+ mci_writel(host, ARGR, cmd->arg);
-+ mci_writel(host, CMDR, cmd_flags);
-+
-+ if (cmd->data)
-+ dma_start_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 cmd_flags;
-+
-+ WARN_ON(host->data);
-+ host->data = data;
-+
-+ atmci_set_timeout(host, data);
-+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+ | MCI_BF(BLKLEN, data->blksz)));
-+ host->dma.req.block_size = data->blksz;
-+ host->dma.req.nr_blocks = data->blocks;
-+
-+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+ if (data->flags & MMC_DATA_STREAM)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else if (data->blocks > 1)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ else
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ cmd_flags |= MCI_BIT(TRDIR);
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_FROM_DEVICE);
-+ host->dma.req.periph_id = host->dma.rx_periph_id;
-+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+ } else {
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_TO_DEVICE);
-+ host->dma.req.periph_id = host->dma.tx_periph_id;
-+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+ }
-+ host->dma.req.sg = data->sg;
-+
-+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+ return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = mrq->data;
-+ u32 iflags;
-+ u32 cmdflags = 0;
-+
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
-+
-+ WARN_ON(host->mrq != NULL);
-+ host->mrq = mrq;
-+ host->pending_events = 0;
-+ host->completed_events = 0;
-+
-+ iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
-+
-+ if (mrq->stop) {
-+ BUG_ON(!data);
-+
-+ host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
-+ &host->stop_cmdr);
-+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ host->stop_cmdr |= MCI_BIT(TRDIR);
-+ if (data->flags & MMC_DATA_STREAM)
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ }
-+ if (data) {
-+ cmdflags |= atmci_prepare_data(mmc, data);
-+ iflags |= MCI_DATA_ERROR_FLAGS;
-+ }
-+
-+ atmci_start_command(host, mrq->cmd, cmdflags);
-+ mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (ios->clock) {
-+ u32 clkdiv;
-+
-+ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+ if (clkdiv > 255)
-+ clkdiv = 255;
-+ mci_writel(host, MR, (clkdiv
-+ | MCI_BIT(WRPROOF)
-+ | MCI_BIT(RDPROOF)));
-+ }
-+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, SDCR, 0);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+ break;
-+ }
-+
-+ switch (ios->power_mode) {
-+ case MMC_POWER_OFF:
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ break;
-+ case MMC_POWER_UP:
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ break;
-+ case MMC_POWER_ON:
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ break;
-+ }
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+ int read_only = 0;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (host->wp_pin >= 0) {
-+ read_only = gpio_get_value(host->wp_pin);
-+ pr_debug("%s: card is %s\n", mmc_hostname(mmc),
-+ read_only ? "read-only" : "read-write");
-+ } else {
-+ pr_debug("%s: no pin for checking read-only switch."
-+ " Assuming write-enable.\n", mmc_hostname(mmc));
-+ }
-+
-+ return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+ .request = atmci_request,
-+ .set_ios = atmci_set_ios,
-+ .get_ro = atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ WARN_ON(host->cmd || host->data);
-+ host->mrq = NULL;
-+
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+ u32 flags)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+ mci_writel(host, IER, host->stop_iflags);
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ host->data = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+ /*
-+ * Data might complete before command for very short transfers
-+ * (like READ_SCR)
-+ */
-+ if (mci_cmd_is_complete(host)
-+ && (!data->stop || mci_stop_is_complete(host)))
-+ atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_error(struct mmc_host *mmc,
-+ struct mmc_command *cmd,
-+ u32 status)
-+{
-+ pr_debug("%s: command error: status=0x%08x\n",
-+ mmc_hostname(mmc), status);
-+
-+ if (status & MCI_BIT(RTOE))
-+ cmd->error = MMC_ERR_TIMEOUT;
-+ else if (status & MCI_BIT(RCRCE))
-+ cmd->error = MMC_ERR_BADCRC;
-+ else
-+ cmd->error = MMC_ERR_FAILED;
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+ struct mmc_host *mmc = (struct mmc_host *)priv;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_request *mrq = host->mrq;
-+ struct mmc_data *data = host->data;
-+
-+ pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
-+ host->pending_events, host->completed_events,
-+ mci_readl(host, IMR));
-+
-+ if (mci_clear_cmd_error_is_pending(host)) {
-+ struct mmc_command *cmd;
-+
-+ mci_set_cmd_error_complete(host);
-+ mci_clear_cmd_pending(host);
-+ cmd = host->mrq->cmd;
-+
-+ if (cmd->data) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data = NULL;
-+ }
-+
-+ atmci_command_error(mmc, cmd, host->error_status);
-+ atmci_request_end(mmc, cmd->mrq);
-+ }
-+ if (mci_clear_stop_error_is_pending(host)) {
-+ mci_set_stop_error_complete(host);
-+ mci_clear_stop_pending(host);
-+ atmci_command_error(mmc, host->mrq->stop,
-+ host->error_status);
-+ if (!host->data)
-+ atmci_request_end(mmc, host->mrq);
-+ }
-+ if (mci_clear_cmd_is_pending(host)) {
-+ mci_set_cmd_complete(host);
-+ if (!mrq->data || mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_stop_is_pending(host)) {
-+ mci_set_stop_complete(host);
-+ if (mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_dma_error_is_pending(host)) {
-+ mci_set_dma_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ /* DMA controller got bus error => invalid address */
-+ data->error = MMC_ERR_INVALID;
-+
-+ printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
-+ mmc_hostname(mmc), host->data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_error_is_pending(host)) {
-+ u32 status = host->error_status;
-+
-+ mci_set_data_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
-+ mmc_hostname(host->mmc), status);
-+
-+ if (status & MCI_BIT(DCRCE)) {
-+ printk(KERN_DEBUG "%s: Data CRC error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_BADCRC;
-+ } else if (status & MCI_BIT(DTOE)) {
-+ printk(KERN_DEBUG "%s: Data Timeout error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_TIMEOUT;
-+ } else {
-+ printk(KERN_DEBUG "%s: Data FIFO error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_FIFO;
-+ }
-+ printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
-+ mmc_hostname(host->mmc), data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_is_pending(host)) {
-+ mci_set_data_complete(host);
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_card_detect_is_pending(host)) {
-+ /* Reset controller if card is gone */
-+ if (!host->present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
-+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host)
-+ && !mci_cmd_error_is_complete(host)) {
-+ mrq->cmd->error = MMC_ERR_TIMEOUT;
-+ }
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = MMC_ERR_TIMEOUT;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host)
-+ && !mci_stop_error_is_complete(host)) {
-+ mrq->stop->error = MMC_ERR_TIMEOUT;
-+ }
-+
-+ host->cmd = NULL;
-+ atmci_request_end(mmc, mrq);
-+ }
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+ }
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = host->cmd;
-+
-+ /*
-+ * Read the response now so that we're free to send a new
-+ * command immediately.
-+ */
-+ cmd->resp[0] = mci_readl(host, RSPR);
-+ cmd->resp[1] = mci_readl(host, RSPR);
-+ cmd->resp[2] = mci_readl(host, RSPR);
-+ cmd->resp[3] = mci_readl(host, RSPR);
-+
-+ mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
-+ host->cmd = NULL;
-+
-+ if (mci_stop_sent_is_complete(host))
-+ mci_set_stop_pending(host);
-+ else
-+ mci_set_cmd_pending(host);
-+
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+ struct mmc_data *data;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+ data = host->data;
-+
-+ if (data->stop && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ } else {
-+ /*
-+ * For the WRITE case, wait for NOTBUSY. This function
-+ * is called when everything has been written to the
-+ * controller, not when the card is done programming.
-+ */
-+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+ }
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+
-+ mci_set_dma_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 status, mask, pending;
-+
-+ spin_lock(&mmc->lock);
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+
-+ do {
-+ if (pending & MCI_CMD_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(CMDRDY)
-+ | MCI_BIT(NOTBUSY)
-+ | MCI_CMD_ERROR_FLAGS
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->error_status = status;
-+ host->cmd = NULL;
-+ if (mci_stop_sent_is_complete(host))
-+ mci_set_stop_error_pending(host);
-+ else
-+ mci_set_cmd_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_DATA_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->error_status = status;
-+ mci_set_data_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_BIT(CMDRDY))
-+ atmci_cmd_interrupt(mmc, status);
-+ if (pending & MCI_BIT(NOTBUSY)) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+ } while (pending);
-+
-+ spin_unlock(&mmc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ int present = !gpio_get_value(irq_to_gpio(irq));
-+
-+ if (present != host->present) {
-+ pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+ mci_set_card_detect_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+ struct mci_platform_data *board;
-+ struct atmel_mci *host;
-+ struct mmc_host *mmc;
-+ struct resource *regs;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ board = pdev->dev.platform_data;
-+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+ if (!mmc)
-+ return -ENOMEM;
-+
-+ host = mmc_priv(mmc);
-+ host->pdev = pdev;
-+ host->mmc = mmc;
-+ if (board) {
-+ host->detect_pin = board->detect_pin;
-+ host->wp_pin = board->wp_pin;
-+ } else {
-+ host->detect_pin = -1;
-+ host->detect_pin = -1;
-+ }
-+
-+ host->mck = clk_get(&pdev->dev, "mci_clk");
-+ if (IS_ERR(host->mck)) {
-+ ret = PTR_ERR(host->mck);
-+ goto out_free_host;
-+ }
-+ clk_enable(host->mck);
-+
-+ ret = -ENOMEM;
-+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!host->regs)
-+ goto out_disable_clk;
-+
-+ host->bus_hz = clk_get_rate(host->mck);
-+ host->mapbase = regs->start;
-+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = (host->bus_hz + 511) / 512;
-+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+ mmc->ocr_avail = 0x00100000;
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+ if (ret)
-+ goto out_unmap;
-+
-+ /* Assume card is present if we don't have a detect pin */
-+ host->present = 1;
-+ if (host->detect_pin >= 0) {
-+ if (gpio_request(host->detect_pin, "mmc_detect")) {
-+ printk(KERN_WARNING "%s: no detect pin available\n",
-+ mmc_hostname(host->mmc));
-+ host->detect_pin = -1;
-+ } else {
-+ host->present = !gpio_get_value(host->detect_pin);
-+ }
-+ }
-+ if (host->wp_pin >= 0) {
-+ if (gpio_request(host->wp_pin, "mmc_wp")) {
-+ printk(KERN_WARNING "%s: no WP pin available\n",
-+ mmc_hostname(host->mmc));
-+ host->wp_pin = -1;
-+ }
-+ }
-+
-+ /* TODO: Get this information from platform data */
-+ ret = -ENOMEM;
-+ host->dma.req.req.dmac = find_dma_controller(0);
-+ if (!host->dma.req.req.dmac) {
-+ printk(KERN_ERR
-+ "mmci: No DMA controller available, aborting\n");
-+ goto out_free_irq;
-+ }
-+ ret = dma_alloc_channel(host->dma.req.req.dmac);
-+ if (ret < 0) {
-+ printk(KERN_ERR
-+ "mmci: Unable to allocate DMA channel, aborting\n");
-+ goto out_free_irq;
-+ }
-+ host->dma.req.req.channel = ret;
-+ host->dma.req.width = DMA_WIDTH_32BIT;
-+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+ host->dma.req.req.error = atmci_dma_error;
-+ host->dma.rx_periph_id = 0;
-+ host->dma.tx_periph_id = 1;
-+
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+
-+ platform_set_drvdata(pdev, host);
-+
-+ mmc_add_host(mmc);
-+
-+ if (host->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(host->detect_pin),
-+ atmci_detect_change,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ DRIVER_NAME, mmc);
-+ if (ret) {
-+ printk(KERN_ERR
-+ "%s: could not request IRQ %d for detect pin\n",
-+ mmc_hostname(mmc),
-+ gpio_to_irq(host->detect_pin));
-+ gpio_free(host->detect_pin);
-+ host->detect_pin = -1;
-+ }
-+ }
-+
-+ printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
-+ mmc_hostname(mmc), host->mapbase, irq);
-+
-+ atmci_init_debugfs(host);
-+
-+ return 0;
-+
-+out_free_irq:
-+ if (host->detect_pin >= 0)
-+ gpio_free(host->detect_pin);
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+ free_irq(irq, mmc);
-+out_unmap:
-+ iounmap(host->regs);
-+out_disable_clk:
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+out_free_host:
-+ mmc_free_host(mmc);
-+ return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (host) {
-+ atmci_cleanup_debugfs(host);
-+
-+ if (host->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+ cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(host->detect_pin);
-+ }
-+
-+ mmc_remove_host(host->mmc);
-+
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ mci_readl(host, SR);
-+
-+ dma_release_channel(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+
-+ free_irq(platform_get_irq(pdev, 0), host->mmc);
-+ iounmap(host->regs);
-+
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+
-+ mmc_free_host(host->mmc);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+ .probe = atmci_probe,
-+ .remove = __devexit_p(atmci_remove),
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ },
-+};
-+
-+static int __init atmci_init(void)
-+{
-+ return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+ platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/atmel-mci.h b/drivers/mmc/atmel-mci.h
-new file mode 100644
-index 0000000..60d15c4
---- /dev/null
-+++ b/drivers/mmc/atmel-mci.h
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR 0x0000
-+#define MCI_MR 0x0004
-+#define MCI_DTOR 0x0008
-+#define MCI_SDCR 0x000c
-+#define MCI_ARGR 0x0010
-+#define MCI_CMDR 0x0014
-+#define MCI_BLKR 0x0018
-+#define MCI_RSPR 0x0020
-+#define MCI_RSPR1 0x0024
-+#define MCI_RSPR2 0x0028
-+#define MCI_RSPR3 0x002c
-+#define MCI_RDR 0x0030
-+#define MCI_TDR 0x0034
-+#define MCI_SR 0x0040
-+#define MCI_IER 0x0044
-+#define MCI_IDR 0x0048
-+#define MCI_IMR 0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET 0
-+#define MCI_MCIEN_SIZE 1
-+#define MCI_MCIDIS_OFFSET 1
-+#define MCI_MCIDIS_SIZE 1
-+#define MCI_PWSEN_OFFSET 2
-+#define MCI_PWSEN_SIZE 1
-+#define MCI_PWSDIS_OFFSET 3
-+#define MCI_PWSDIS_SIZE 1
-+#define MCI_SWRST_OFFSET 7
-+#define MCI_SWRST_SIZE 1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET 0
-+#define MCI_CLKDIV_SIZE 8
-+#define MCI_PWSDIV_OFFSET 8
-+#define MCI_PWSDIV_SIZE 3
-+#define MCI_RDPROOF_OFFSET 11
-+#define MCI_RDPROOF_SIZE 1
-+#define MCI_WRPROOF_OFFSET 12
-+#define MCI_WRPROOF_SIZE 1
-+#define MCI_DMAPADV_OFFSET 14
-+#define MCI_DMAPADV_SIZE 1
-+#define MCI_BLKLEN_OFFSET 16
-+#define MCI_BLKLEN_SIZE 16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET 0
-+#define MCI_DTOCYC_SIZE 4
-+#define MCI_DTOMUL_OFFSET 4
-+#define MCI_DTOMUL_SIZE 3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET 0
-+#define MCI_SDCSEL_SIZE 4
-+#define MCI_SDCBUS_OFFSET 7
-+#define MCI_SDCBUS_SIZE 1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET 0
-+#define MCI_ARG_SIZE 32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET 0
-+#define MCI_CMDNB_SIZE 6
-+#define MCI_RSPTYP_OFFSET 6
-+#define MCI_RSPTYP_SIZE 2
-+#define MCI_SPCMD_OFFSET 8
-+#define MCI_SPCMD_SIZE 3
-+#define MCI_OPDCMD_OFFSET 11
-+#define MCI_OPDCMD_SIZE 1
-+#define MCI_MAXLAT_OFFSET 12
-+#define MCI_MAXLAT_SIZE 1
-+#define MCI_TRCMD_OFFSET 16
-+#define MCI_TRCMD_SIZE 2
-+#define MCI_TRDIR_OFFSET 18
-+#define MCI_TRDIR_SIZE 1
-+#define MCI_TRTYP_OFFSET 19
-+#define MCI_TRTYP_SIZE 2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET 0
-+#define MCI_BCNT_SIZE 16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET 0
-+#define MCI_RSP_SIZE 32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET 0
-+#define MCI_CMDRDY_SIZE 1
-+#define MCI_RXRDY_OFFSET 1
-+#define MCI_RXRDY_SIZE 1
-+#define MCI_TXRDY_OFFSET 2
-+#define MCI_TXRDY_SIZE 1
-+#define MCI_BLKE_OFFSET 3
-+#define MCI_BLKE_SIZE 1
-+#define MCI_DTIP_OFFSET 4
-+#define MCI_DTIP_SIZE 1
-+#define MCI_NOTBUSY_OFFSET 5
-+#define MCI_NOTBUSY_SIZE 1
-+#define MCI_ENDRX_OFFSET 6
-+#define MCI_ENDRX_SIZE 1
-+#define MCI_ENDTX_OFFSET 7
-+#define MCI_ENDTX_SIZE 1
-+#define MCI_RXBUFF_OFFSET 14
-+#define MCI_RXBUFF_SIZE 1
-+#define MCI_TXBUFE_OFFSET 15
-+#define MCI_TXBUFE_SIZE 1
-+#define MCI_RINDE_OFFSET 16
-+#define MCI_RINDE_SIZE 1
-+#define MCI_RDIRE_OFFSET 17
-+#define MCI_RDIRE_SIZE 1
-+#define MCI_RCRCE_OFFSET 18
-+#define MCI_RCRCE_SIZE 1
-+#define MCI_RENDE_OFFSET 19
-+#define MCI_RENDE_SIZE 1
-+#define MCI_RTOE_OFFSET 20
-+#define MCI_RTOE_SIZE 1
-+#define MCI_DCRCE_OFFSET 21
-+#define MCI_DCRCE_SIZE 1
-+#define MCI_DTOE_OFFSET 22
-+#define MCI_DTOE_SIZE 1
-+#define MCI_OVRE_OFFSET 30
-+#define MCI_OVRE_SIZE 1
-+#define MCI_UNRE_OFFSET 31
-+#define MCI_UNRE_SIZE 1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE 0
-+#define MCI_DTOMUL_16_CYCLES 1
-+#define MCI_DTOMUL_128_CYCLES 2
-+#define MCI_DTOMUL_256_CYCLES 3
-+#define MCI_DTOMUL_1024_CYCLES 4
-+#define MCI_DTOMUL_4096_CYCLES 5
-+#define MCI_DTOMUL_65536_CYCLES 6
-+#define MCI_DTOMUL_1048576_CYCLES 7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP 0
-+#define MCI_RSPTYP_48_BIT 1
-+#define MCI_RSPTYP_136_BIT 2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD 0
-+#define MCI_SPCMD_INIT_CMD 1
-+#define MCI_SPCMD_SYNC_CMD 2
-+#define MCI_SPCMD_INT_CMD 4
-+#define MCI_SPCMD_INT_RESP 5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS 0
-+#define MCI_TRCMD_START_TRANS 1
-+#define MCI_TRCMD_STOP_TRANS 2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK 0
-+#define MCI_TRTYP_MULTI_BLOCK 1
-+#define MCI_TRTYP_STREAM 2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name) \
-+ (1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value) \
-+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
-+ << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value) \
-+ (((value) >> MCI_##name##_OFFSET) \
-+ & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
-+ << MCI_##name##_OFFSET)) \
-+ | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg) \
-+ __raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index f334959..e2ef662 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -47,6 +47,7 @@
- #define I82802AC 0x00ac
- #define MANUFACTURER_ST 0x0020
- #define M50LPW080 0x002F
-+#define AT49BV640D 0x02de
-
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -153,6 +154,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
- }
- #endif
-
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+ struct cfi_pri_atmel atmel_pri;
-+ uint32_t features = 0;
-+
-+ /* Reverse byteswapping */
-+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+ if (atmel_pri.Features & 0x01) /* chip erase supported */
-+ features |= (1<<0);
-+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+ features |= (1<<1);
-+ if (atmel_pri.Features & 0x04) /* program suspend supported */
-+ features |= (1<<2);
-+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+ features |= (1<<9);
-+ if (atmel_pri.Features & 0x20) /* page mode read supported */
-+ features |= (1<<7);
-+ if (atmel_pri.Features & 0x40) /* queued erase supported */
-+ features |= (1<<4);
-+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+ features |= (1<<6);
-+
-+ extp->FeatureSupport = features;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -221,6 +263,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- extp->TopBottom = 2;
- else
- extp->TopBottom = 3;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
- }
-
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
- #if !FORCE_WORD_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
-index 35f8864..29388e1 100644
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -270,6 +270,13 @@ config AT91_CF
- Say Y here to support the CompactFlash controller on AT91 chips.
- Or choose M to compile the driver as a module named "at91_cf".
-
-+config AT32_CF
-+ tristate "AT32AP CompactFlash Controller"
-+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
-+ help
-+ Say Y here to support the CompactFlash controller on AT32 chips.
-+ Or choose M to compile the driver as a module named "at32_cf".
-+
- config PCCARD_NONSTATIC
- tristate
-
-diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
-index 4276965..08d7ffa 100644
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
- obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
- obj-$(CONFIG_OMAP_CF) += omap_cf.o
- obj-$(CONFIG_AT91_CF) += at91_cf.o
-+obj-$(CONFIG_AT32_CF) += at32_cf.o
-
- sa11xx_core-y += soc_common.o sa11xx_base.o
- pxa2xx_core-y += soc_common.o pxa2xx_base.o
-diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
-new file mode 100644
-index 0000000..7165c39
---- /dev/null
-+++ b/drivers/pcmcia/at32_cf.c
-@@ -0,0 +1,506 @@
-+/*
-+ * Driver for AVR32 Static Memory Controller: CompactFlash support
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+
-+#include <asm/arch/smc.h>
-+
-+struct at32_cf_socket {
-+ struct pcmcia_socket socket;
-+ int detect_pin;
-+ int reset_pin;
-+ int vcc_pin;
-+ struct resource res_attr;
-+ struct resource res_mem;
-+ struct resource res_io;
-+ struct smc_config smc;
-+ unsigned int irq;
-+ unsigned int cf_cs;
-+ socket_state_t state;
-+ unsigned present:1;
-+};
-+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
-+
-+/*
-+ * We have the following memory layout relative to the base address:
-+ *
-+ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
-+ * True IDE Mode: 00c0 0000 -> 00df ffff
-+ * I/O memory: 0080 0000 -> 00bf ffff
-+ * Common memory: 0040 0000 -> 007f ffff
-+ * Attribute memory: 0000 0000 -> 003f ffff
-+ */
-+#define CF_ATTR_OFFSET 0x00000000
-+#define CF_MEM_OFFSET 0x00400000
-+#define CF_IO_OFFSET 0x00800000
-+#define CF_RES_SIZE 2048
-+
-+#ifdef DEBUG
-+
-+static int pc_debug;
-+module_param(pc_debug, int, 0644);
-+
-+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
-+ int level, const char *fmt, ...)
-+{
-+ va_list args;
-+
-+ if (pc_debug > level) {
-+ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
-+ va_start(args, fmt);
-+ vprintk(fmt, args);
-+ va_end(args);
-+ }
-+}
-+
-+#define debug(cf, lvl, fmt, arg...) \
-+ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
-+
-+#else
-+#define debug(cf, lvl, fmt, arg...) do { } while (0)
-+#endif
-+
-+static inline int at32_cf_present(struct at32_cf_socket *cf)
-+{
-+ int present = 1;
-+
-+ /* If we don't have a detect pin, assume the card is present */
-+ if (cf->detect_pin >= 0)
-+ present = !gpio_get_value(cf->detect_pin);
-+
-+ return present;
-+}
-+
-+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
-+{
-+ struct at32_cf_socket *cf = dev_id;
-+ unsigned int present;
-+
-+ present = at32_cf_present(cf);
-+ if (present != cf->present) {
-+ cf->present = present;
-+ debug(cf, 3, "card %s\n", present ? "present" : "gone");
-+ pcmcia_parse_events(&cf->socket, SS_DETECT);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
-+{
-+ struct at32_cf_socket *cf;
-+ u_int status = 0;
-+
-+ cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ if (at32_cf_present(cf)) {
-+ /* NOTE: gpio on AP7xxx is 3.3V */
-+ status = SS_DETECT | SS_3VCARD | SS_READY;
-+ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
-+ status |= SS_POWERON;
-+ }
-+
-+ *value = status;
-+ return 0;
-+}
-+
-+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-+{
-+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
-+ (state->csc_mask==0)?"<NONE> ":"",
-+ (state->csc_mask&SS_DETECT)?"DETECT ":"",
-+ (state->csc_mask&SS_READY)?"READY ":"",
-+ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-+ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-+ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-+ (state->flags==0)?"<NONE> ":"",
-+ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-+ (state->flags&SS_IOCARD)?"IOCARD ":"",
-+ (state->flags&SS_RESET)?"RESET ":"",
-+ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-+ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
-+ state->Vcc, state->Vpp, state->io_irq);
-+
-+ /*
-+ * TODO: Allow boards to override this in case they have level
-+ * converters.
-+ */
-+ switch (state->Vcc) {
-+ case 0:
-+ if (cf->vcc_pin >= 0)
-+ gpio_set_value(cf->vcc_pin, 0);
-+ break;
-+ case 33:
-+ if (cf->vcc_pin >= 0)
-+ gpio_set_value(cf->vcc_pin, 1);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (cf->reset_pin >= 0)
-+ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
-+
-+ cf->state = *state;
-+
-+ return 0;
-+}
-+
-+static int at32_cf_socket_init(struct pcmcia_socket *sock)
-+{
-+#ifdef DEBUG
-+ struct at32_cf_socket *cf = to_at32_cf(sock);
-+ debug(cf, 2, "called\n");
-+#endif
-+ return 0;
-+}
-+
-+static int at32_cf_suspend(struct pcmcia_socket *sock)
-+{
-+#ifdef DEBUG
-+ struct at32_cf_socket *cf = to_at32_cf(sock);
-+ debug(cf, 2, "called\n");
-+#endif
-+ at32_cf_set_socket(sock, &dead_socket);
-+
-+ return 0;
-+}
-+
-+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
-+ struct pccard_io_map *map)
-+{
-+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+ int retval;
-+
-+ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
-+ map->map, map->speed, map->start, map->stop);
-+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+ (map->flags == 0) ? "<NONE>":"",
-+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-+ (map->flags & MAP_16BIT) ? "16BIT " : "",
-+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-+ (map->flags & MAP_0WS) ? "0WS " : "",
-+ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
-+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
-+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
-+
-+ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
-+
-+ if (map->flags & MAP_16BIT)
-+ cf->smc.bus_width = 2;
-+ else
-+ cf->smc.bus_width = 1;
-+
-+ if (map->flags & MAP_USE_WAIT)
-+ cf->smc.nwait_mode = 3;
-+ else
-+ cf->smc.nwait_mode = 0;
-+
-+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (retval) {
-+ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
-+ return retval;
-+ }
-+
-+ map->start = cf->socket.io_offset;
-+ map->stop = map->start + CF_RES_SIZE - 1;
-+
-+ return 0;
-+}
-+
-+static int
-+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-+{
-+ struct at32_cf_socket *cf;
-+
-+ cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ debug(cf, 2, "map %u speed %u card_start %08x\n",
-+ map->map, map->speed, map->card_start);
-+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+ (map->flags==0)?"<NONE>":"",
-+ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-+ (map->flags&MAP_16BIT)?"16BIT ":"",
-+ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-+ (map->flags&MAP_0WS)?"0WS ":"",
-+ (map->flags&MAP_WRPROT)?"WRPROT ":"",
-+ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
-+ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
-+
-+ if (map->card_start)
-+ return -EINVAL;
-+
-+ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT;
-+
-+ if (map->flags & MAP_ATTRIB)
-+ map->static_start = cf->res_attr.start;
-+ else
-+ map->static_start = cf->res_mem.start;
-+
-+ return 0;
-+}
-+
-+static struct pccard_operations at32_cf_ops = {
-+ .init = at32_cf_socket_init,
-+ .suspend = at32_cf_suspend,
-+ .get_status = at32_cf_get_status,
-+ .set_socket = at32_cf_set_socket,
-+ .set_io_map = at32_cf_set_io_map,
-+ .set_mem_map = at32_cf_set_mem_map,
-+};
-+
-+static int __init request_pin(struct platform_device *pdev,
-+ unsigned int pin, const char *name)
-+{
-+ if (gpio_request(pin, name)) {
-+ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
-+ return -1;
-+ }
-+
-+ return pin;
-+}
-+
-+static int __init at32_cf_probe(struct platform_device *pdev)
-+{
-+ struct at32_cf_socket *cf;
-+ struct cf_platform_data *board = pdev->dev.platform_data;
-+ struct resource *res_skt;
-+ int irq;
-+ int ret;
-+
-+ dev_dbg(&pdev->dev, "probe");
-+
-+ if (!board)
-+ return -ENXIO;
-+
-+ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res_skt)
-+ return -ENXIO;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
-+ if (!cf)
-+ return -ENOMEM;
-+
-+ cf->detect_pin = -1;
-+ cf->reset_pin = -1;
-+ cf->vcc_pin = -1;
-+ cf->cf_cs = board->cs;
-+
-+ if (board->detect_pin)
-+ cf->detect_pin = request_pin(pdev, board->detect_pin,
-+ "cf_detect");
-+ if (board->reset_pin)
-+ cf->reset_pin = request_pin(pdev, board->reset_pin,
-+ "cf_reset");
-+ if (board->vcc_pin)
-+ cf->vcc_pin = request_pin(pdev, board->reset_pin,
-+ "cf_vcc");
-+
-+ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
-+ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
-+
-+ cf->socket.pci_irq = irq;
-+ cf->socket.ops = &at32_cf_ops;
-+ cf->socket.resource_ops = &pccard_static_ops;
-+ cf->socket.dev.parent = &pdev->dev;
-+ cf->socket.owner = THIS_MODULE;
-+ cf->socket.features =
-+ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
-+ cf->socket.map_size = CF_RES_SIZE;
-+
-+ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
-+ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
-+ cf->res_attr.name = "attribute";
-+ cf->res_attr.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_attr);
-+ if (ret)
-+ goto err_request_res_attr;
-+
-+ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
-+ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
-+ cf->res_mem.name = "memory";
-+ cf->res_mem.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_mem);
-+ if (ret)
-+ goto err_request_res_mem;
-+
-+ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
-+ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
-+ cf->res_io.name = "io";
-+ cf->res_io.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_io);
-+ if (ret)
-+ goto err_request_res_io;
-+
-+ cf->socket.io_offset = cf->res_io.start;
-+
-+ if (cf->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
-+ IRQF_SHARED, "cf_detect", cf);
-+ if (ret) {
-+ debug(cf, 1,
-+ "failed to request cf_detect interrupt\n");
-+ goto err_detect_irq;
-+ }
-+ }
-+
-+ /* Setup SMC timings */
-+ cf->smc.ncs_read_setup = 30;
-+ cf->smc.nrd_setup = 75;
-+ cf->smc.ncs_write_setup = 30;
-+ cf->smc.nwe_setup = 75;
-+
-+ cf->smc.ncs_read_pulse = 240;
-+ cf->smc.nrd_pulse = 165;
-+ cf->smc.ncs_write_pulse = 240;
-+ cf->smc.nwe_pulse = 165;
-+
-+ cf->smc.read_cycle = 300;
-+ cf->smc.write_cycle = 300;
-+
-+ cf->smc.bus_width = 2;
-+ cf->smc.nrd_controlled = 1;
-+ cf->smc.nwe_controlled = 1;
-+ cf->smc.nwait_mode = 0;
-+ cf->smc.byte_write = 0;
-+ cf->smc.tdf_cycles = 1;
-+ cf->smc.tdf_mode = 0;
-+
-+ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (ret) {
-+ debug(cf, 1, "failed to configure SMC\n", ret);
-+ goto err_smc;
-+ }
-+
-+ ret = pcmcia_register_socket(&cf->socket);
-+ if (ret) {
-+ debug(cf, 1, "failed to register socket: %d\n", ret);
-+ goto err_register_socket;
-+ }
-+
-+ if (cf->reset_pin >= 0) {
-+ gpio_direction_output(cf->reset_pin, 0);
-+ }
-+
-+ platform_set_drvdata(pdev, cf);
-+
-+ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
-+ (unsigned long)res_skt->start);
-+
-+ return 0;
-+
-+err_register_socket:
-+err_smc:
-+ if (cf->detect_pin >= 0)
-+ free_irq(gpio_to_irq(cf->detect_pin), cf);
-+err_detect_irq:
-+ release_resource(&cf->res_io);
-+err_request_res_io:
-+ release_resource(&cf->res_mem);
-+err_request_res_mem:
-+ release_resource(&cf->res_attr);
-+err_request_res_attr:
-+ if (cf->vcc_pin >= 0)
-+ gpio_free(cf->vcc_pin);
-+ if (cf->reset_pin >= 0)
-+ gpio_free(cf->reset_pin);
-+ if (cf->detect_pin >= 0)
-+ gpio_free(cf->detect_pin);
-+ kfree(cf);
-+
-+ return ret;
-+}
-+
-+static int __exit at32_cf_remove(struct platform_device *pdev)
-+{
-+ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
-+
-+ pcmcia_unregister_socket(&cf->socket);
-+ if (cf->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(cf->detect_pin), cf);
-+ gpio_free(cf->detect_pin);
-+ }
-+ if (cf->vcc_pin >= 0)
-+ gpio_free(cf->vcc_pin);
-+ if (cf->reset_pin >= 0)
-+ gpio_free(cf->reset_pin);
-+
-+ release_resource(&cf->res_io);
-+ release_resource(&cf->res_mem);
-+ release_resource(&cf->res_attr);
-+ kfree(cf);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver at32_cf_driver = {
-+ .remove = __exit_p(at32_cf_remove),
-+ .driver = {
-+ .name = "at32_cf",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at32_cf_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
-+ if (ret)
-+ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
-+ return ret;
-+}
-+
-+static void __exit at32_cf_exit(void)
-+{
-+ platform_driver_unregister(&at32_cf_driver);
-+}
-+
-+module_init(at32_cf_init);
-+module_exit(at32_cf_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
-index d154dee..5a464ec 100644
---- a/drivers/pcmcia/cistpl.c
-+++ b/drivers/pcmcia/cistpl.c
-@@ -1091,7 +1091,7 @@ static int parse_cftable_entry(tuple_t *tuple,
- break;
- case 0x20:
- entry->mem.nwin = 1;
-- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
-+ entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16);
- entry->mem.win[0].card_addr = 0;
- entry->mem.win[0].host_addr = 0;
- p += 2;
-@@ -1099,9 +1099,8 @@ static int parse_cftable_entry(tuple_t *tuple,
- break;
- case 0x40:
- entry->mem.nwin = 1;
-- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
-- entry->mem.win[0].card_addr =
-- le16_to_cpu(*(__le16 *)(p+2)) << 8;
-+ entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16);
-+ entry->mem.win[0].card_addr = (p[2] << 8) | (p[3] << 16);
- entry->mem.win[0].host_addr = 0;
- p += 4;
- if (p > q) return CS_BAD_TUPLE;
-diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
-index 95826b9..ee96d77 100644
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -313,6 +313,13 @@ config RTC_DRV_PL031
- To compile this driver as a module, choose M here: the
- module will be called rtc-pl031.
-
-+config RTC_DRV_AT32AP700X
-+ tristate "AT32AP700X series RTC"
-+ depends on RTC_CLASS && PLATFORM_AT32AP
-+ help
-+ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
-+ AT32AP700x family processors.
-+
- config RTC_DRV_AT91RM9200
- tristate "AT91RM9200"
- depends on RTC_CLASS && ARCH_AT91RM9200
-diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
-index 92bfe1b..d36d987 100644
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
- obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
- obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-+obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
- obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
- obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
-diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
-new file mode 100644
-index 0000000..a59b7c1
---- /dev/null
-+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -0,0 +1,319 @@
-+/*
-+ * An RTC driver for the AVR32 AT32AP700x processor series
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+
-+#include <asm/io.h>
-+
-+/* This is a bare-bones RTC. It runs during most system sleep states, but has
-+ * no battery backup and gets reset during system restart. It must be
-+ * initialized from an external clock (network, I2C, etc) before it can be of
-+ * much use.
-+ *
-+ * The alarm functionality is limited by the hardware, not supporting periodic
-+ * interrupts.
-+ */
-+
-+#define RTC_CTRL 0x00
-+#define RTC_CTRL_EN 0
-+#define RTC_CTRL_PCLR 1
-+#define RTC_CTRL_TOPEN 2
-+#define RTC_CTRL_PSEL 8
-+
-+#define RTC_VAL 0x04
-+
-+#define RTC_TOP 0x08
-+
-+#define RTC_IER 0x10
-+#define RTC_IER_TOPI 0
-+
-+#define RTC_IDR 0x14
-+#define RTC_IDR_TOPI 0
-+
-+#define RTC_IMR 0x18
-+#define RTC_IMR_TOPI 0
-+
-+#define RTC_ISR 0x1c
-+#define RTC_ISR_TOPI 0
-+
-+#define RTC_ICR 0x20
-+#define RTC_ICR_TOPI 0
-+
-+#define RTC_BIT(name) (1 << RTC_##name)
-+#define RTC_BF(name,value) ((value) << RTC_##name)
-+
-+#define rtc_readl(dev,reg) \
-+ __raw_readl((dev)->regs + RTC_##reg)
-+#define rtc_writel(dev,reg,value) \
-+ __raw_writel((value), (dev)->regs + RTC_##reg)
-+
-+struct rtc_at32ap700x {
-+ struct rtc_device *rtc;
-+ void __iomem *regs;
-+ unsigned long alarm_time;
-+ unsigned long irq;
-+ spinlock_t lock;
-+};
-+
-+static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long now;
-+
-+ now = rtc_readl(rtc, VAL);
-+ rtc_time_to_tm(now, tm);
-+
-+ return 0;
-+}
-+
-+static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long now;
-+ int ret;
-+
-+ ret = rtc_tm_to_time(tm, &now);
-+ if (ret == 0)
-+ rtc_writel(rtc, VAL, now);
-+
-+ return ret;
-+}
-+
-+static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ struct rtc_time tm;
-+
-+ rtc_time_to_tm(rtc->alarm_time, &tm);
-+ alrm->time = tm;
-+ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
-+
-+ return 0;
-+}
-+
-+static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ struct rtc_time tm;
-+ unsigned long rtc_unix_time;
-+ unsigned long alarm_unix_time;
-+ int ret;
-+
-+ rtc_unix_time = rtc_readl(rtc, VAL);
-+ rtc_time_to_tm(rtc_unix_time, &tm);
-+
-+ /* RTC does only support one alarm time, not periodic */
-+ if (alrm->time.tm_mday < 1) {
-+ alrm->time.tm_mday = tm.tm_mday;
-+ alrm->time.tm_mon = tm.tm_mon;
-+ alrm->time.tm_year = tm.tm_year;
-+ alrm->time.tm_wday = tm.tm_wday;
-+ alrm->time.tm_yday = tm.tm_yday;
-+ }
-+
-+ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
-+ if (ret)
-+ return ret;
-+
-+ if (alarm_unix_time < rtc_unix_time)
-+ return -EINVAL;
-+
-+ spin_lock_irq(&rtc->lock);
-+ rtc->alarm_time = alarm_unix_time;
-+ rtc_writel(rtc, TOP, rtc->alarm_time);
-+ if (alrm->pending)
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ | RTC_BIT(CTRL_TOPEN));
-+ else
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ spin_unlock_irq(&rtc->lock);
-+
-+ return ret;
-+}
-+
-+static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ switch (cmd) {
-+ case RTC_AIE_ON:
-+ spin_lock_irq(&rtc->lock);
-+ if (rtc_readl(rtc, VAL) > rtc->alarm_time)
-+ return -EINVAL;
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ | RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
-+ spin_unlock_irq(&rtc->lock);
-+ break;
-+ case RTC_AIE_OFF:
-+ spin_lock_irq(&rtc->lock);
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ spin_unlock_irq(&rtc->lock);
-+ break;
-+ default:
-+ ret = -ENOIOCTLCMD;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
-+{
-+ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
-+ unsigned long isr = rtc_readl(rtc, ISR);
-+ unsigned long events = 0;
-+
-+ spin_lock(&rtc->lock);
-+
-+ if (isr & RTC_BIT(ISR_TOPI)) {
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, VAL, rtc->alarm_time);
-+ events = RTC_AF | RTC_IRQF;
-+ rtc_update_irq(&rtc->rtc->class_dev, 1, events);
-+ }
-+
-+ spin_unlock(&rtc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct rtc_class_ops at32_rtc_ops = {
-+ .ioctl = at32_rtc_ioctl,
-+ .read_time = at32_rtc_readtime,
-+ .set_time = at32_rtc_settime,
-+ .read_alarm = at32_rtc_readalarm,
-+ .set_alarm = at32_rtc_setalarm,
-+};
-+
-+static int __devinit at32_rtc_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct rtc_at32ap700x *rtc;
-+ int irq = -1;
-+ int ret;
-+
-+ rtc = kmalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
-+ if (!rtc) {
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ printk(KERN_ERR "rtc: no mmio resource defined for RTC\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ printk(KERN_ERR "rtc: could not get irq\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
-+ if (ret) {
-+ printk(KERN_ERR "rtc: could not request irq%d\n", irq);
-+ goto out;
-+ }
-+
-+ rtc->irq = irq;
-+ rtc->alarm_time = 0;
-+ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ spin_lock_init(&rtc->lock);
-+
-+ /* Maybe init RTC: count from zero at 1 Hz, disable wrap irq */
-+ /* Do not reset VAL register, as it can hold an old time
-+ * from last JTAG reset. */
-+ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
-+ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
-+ | RTC_BIT(CTRL_EN));
-+ }
-+
-+ /* REVISIT init in arch code if wdt or rtc is enabled; this
-+ * affects both...
-+ */
-+
-+ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-+ &at32_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc->rtc)) {
-+ ret = PTR_ERR(rtc->rtc);
-+ goto out_free_irq;
-+ }
-+
-+ platform_set_drvdata(pdev, rtc);
-+
-+ printk(KERN_INFO "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
-+ (unsigned long)rtc->regs, rtc->irq);
-+
-+ return 0;
-+
-+out_free_irq:
-+ free_irq(irq, rtc);
-+ iounmap(rtc->regs);
-+out:
-+ kfree(rtc);
-+ return ret;
-+}
-+
-+static int __devexit at32_rtc_remove(struct platform_device *pdev)
-+{
-+ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
-+
-+ if (rtc->irq >= 0)
-+ free_irq(rtc->irq, rtc);
-+ if (rtc->regs)
-+ iounmap(rtc->regs);
-+ rtc_device_unregister(rtc->rtc);
-+ kfree(rtc);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver at32_rtc_driver = {
-+ .remove = __exit_p(at32_rtc_remove),
-+ .driver = {
-+ .name = "rtc",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at32_rtc_init(void)
-+{
-+ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
-+}
-+
-+static void __exit at32_rtc_exit(void)
-+{
-+ platform_driver_unregister(&at32_rtc_driver);
-+}
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Real time counter for AVR32 AT32AP700x");
-+MODULE_LICENSE("GPL");
-+
-+module_init(at32_rtc_init);
-+module_exit(at32_rtc_exit);
-diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
-index 935f48f..4d6b3c5 100644
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -114,6 +114,7 @@ struct atmel_uart_port {
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
-+ int break_active; /* break being received */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
- */
- static void atmel_rx_chars(struct uart_port *port)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, flg;
-
-@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
- * note that the error handling code is
- * out of the main execution path
- */
-- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
-+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
-+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
-+ || atmel_port->break_active)) {
- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
-- if (status & ATMEL_US_RXBRK) {
-+ if (status & ATMEL_US_RXBRK
-+ && !atmel_port->break_active) {
- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
- port->icount.brk++;
-+ atmel_port->break_active = 1;
-+ UART_PUT_IER(port, ATMEL_US_RXBRK);
- if (uart_handle_break(port))
- goto ignore_char;
-+ } else {
-+ /*
-+ * This is either the end-of-break
-+ * condition or we've received at
-+ * least one character without RXBRK
-+ * being set. In both cases, the next
-+ * RXBRK will indicate start-of-break.
-+ */
-+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+ status &= ~ATMEL_US_RXBRK;
-+ atmel_port->break_active = 0;
- }
- if (status & ATMEL_US_PARE)
- port->icount.parity++;
-@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-+ else if (pending & ATMEL_US_RXBRK) {
-+ /*
-+ * End of break detected. If it came along
-+ * with a character, atmel_rx_chars will
-+ * handle it.
-+ */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+ atmel_port->break_active = 0;
-+ }
-
- // TODO: All reads to CSR will clear these interrupts!
- if (pending & ATMEL_US_RIIC) port->icount.rng++;
-@@ -484,11 +512,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
-+ /* Get current mode register */
-+ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
-- /* Get current mode register */
-- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
-+ quot /= 8;
-+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
-+ }
-
- /* byte size */
- switch (termios->c_cflag & CSIZE) {
-diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
-index 11b4436..e014177 100644
---- a/drivers/serial/atmel_serial.h
-+++ b/drivers/serial/atmel_serial.h
-@@ -46,6 +46,9 @@
- #define ATMEL_US_USMODE_ISO7816_T1 6
- #define ATMEL_US_USMODE_IRDA 8
- #define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
-+#define ATMEL_US_USCLKS_MCK (0 << 4)
-+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
-+#define ATMEL_US_USCLKS_SCK (3 << 4)
- #define ATMEL_US_CHRL (3 << 6) /* Character Length */
- #define ATMEL_US_CHRL_5 (0 << 6)
- #define ATMEL_US_CHRL_6 (1 << 6)
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index 66e7bc9..8f5453f 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -22,10 +22,7 @@
- #include <asm/io.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--
--#ifdef CONFIG_ARCH_AT91
- #include <asm/arch/cpu.h>
--#endif
-
- #include "atmel_spi.h"
-
-@@ -116,16 +113,16 @@ static void atmel_spi_next_xfer(struct spi_master *master,
-
- len = as->remaining_bytes;
-
-- tx_dma = xfer->tx_dma;
-- rx_dma = xfer->rx_dma;
-+ tx_dma = xfer->tx_dma + xfer->len - len;
-+ rx_dma = xfer->rx_dma + xfer->len - len;
-
- /* use scratch buffer only when rx or tx data is unspecified */
-- if (rx_dma == INVALID_DMA_ADDRESS) {
-+ if (!xfer->rx_buf) {
- rx_dma = as->buffer_dma;
- if (len > BUFFER_SIZE)
- len = BUFFER_SIZE;
- }
-- if (tx_dma == INVALID_DMA_ADDRESS) {
-+ if (!xfer->tx_buf) {
- tx_dma = as->buffer_dma;
- if (len > BUFFER_SIZE)
- len = BUFFER_SIZE;
-@@ -415,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- csr |= SPI_BIT(NCPHA);
-
- /* TODO: DLYBS and DLYBCT */
-- csr |= SPI_BF(DLYBS, 10);
-- csr |= SPI_BF(DLYBCT, 10);
-+ csr |= SPI_BF(DLYBS, 0);
-+ csr |= SPI_BF(DLYBCT, 0);
-
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-@@ -552,10 +549,8 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
- goto out_free_buffer;
- as->irq = irq;
- as->clk = clk;
--#ifdef CONFIG_ARCH_AT91
- if (!cpu_is_at91rm9200())
- as->new_1 = 1;
--#endif
-
- ret = request_irq(irq, atmel_spi_interrupt, 0,
- pdev->dev.bus_id, master);
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 8372ace..2fcbbd4 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -674,6 +674,22 @@ config FB_S1D13XXX
- working with S1D13806). Product specs at
- <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
-
-+config FB_ATMEL
-+ tristate "AT91/AT32 LCD Controller support"
-+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This enables support for the AT91/AT32 LCD Controller.
-+
-+config FB_INTSRAM
-+ bool "Frame Buffer in internal SRAM"
-+ depends on FB_ATMEL && ARCH_AT91SAM9261
-+ help
-+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-+ to let frame buffer in external SDRAM.
-+
- config FB_NVIDIA
- tristate "nVidia Framebuffer Support"
- depends on FB && PCI
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index 760305c..17a09c6 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_FB_G364) += g364fb.o
- obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-new file mode 100644
-index 0000000..e1d5bd0
---- /dev/null
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -0,0 +1,752 @@
-+/*
-+ * Driver for AT91/AT32 LCD Controller
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-+#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
-+
-+/* configurable parameters */
-+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-+#define ATMEL_LCDC_DMA_BURST_LEN 8
-+
-+#if defined(CONFIG_ARCH_AT91SAM9263)
-+#define ATMEL_LCDC_FIFO_SIZE 2048
-+#else
-+#define ATMEL_LCDC_FIFO_SIZE 512
-+#endif
-+
-+#if defined(CONFIG_ARCH_AT91)
-+#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+
-+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+ struct fb_var_screeninfo *var)
-+{
-+
-+}
-+#elif defined(CONFIG_AVR32)
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
-+
-+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+ struct fb_var_screeninfo *var)
-+{
-+ u32 dma2dcfg;
-+ u32 pixeloff;
-+
-+ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
-+
-+ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
-+ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
-+
-+ /* Update configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
-+ lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
-+ | ATMEL_LCDC_DMAUPDT);
-+}
-+#endif
-+
-+
-+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+
-+static void atmel_lcdfb_update_dma(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ unsigned long dma_addr;
-+
-+ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+ + var->xoffset * var->bits_per_pixel / 8);
-+
-+ dma_addr &= ~3UL;
-+
-+ /* Set framebuffer DMA base address and pixel offset */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-+
-+ atmel_lcdfb_update_dma2d(sinfo, var);
-+}
-+
-+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+
-+ dma_free_writecombine(info->device, info->fix.smem_len,
-+ info->screen_base, info->fix.smem_start);
-+}
-+
-+/**
-+ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
-+ * @sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
-+
-+ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
-+ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
-+
-+ if (!info->screen_base) {
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_lcdfb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct atmel_lcdfb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ struct device *dev = info->device;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long clk_value_khz;
-+
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+ dev_dbg(dev, "%s:\n", __func__);
-+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
-+ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
-+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
-+ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
-+
-+ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
-+ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
-+ return -EINVAL;
-+ }
-+
-+ /* Force same alignment for each line */
-+ var->xres = (var->xres + 3) & ~3UL;
-+ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
-+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+ var->xoffset = var->yoffset = 0;
-+
-+ switch (var->bits_per_pixel) {
-+ case 2:
-+ case 4:
-+ case 8:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ case 15:
-+ case 16:
-+ var->red.offset = 0;
-+ var->green.offset = 5;
-+ var->blue.offset = 10;
-+ var->red.length = var->green.length = var->blue.length = 5;
-+ break;
-+ case 24:
-+ case 32:
-+ var->red.offset = 0;
-+ var->green.offset = 8;
-+ var->blue.offset = 16;
-+ var->red.length = var->green.length = var->blue.length = 8;
-+ break;
-+ default:
-+ dev_err(dev, "color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_lcdfb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. atmel_lcdfb_check_var is always called
-+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_lcdfb_set_par(struct fb_info *info)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long value;
-+ unsigned long clk_value_khz;
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ /* Turn off the LCD controller and the DMA controller */
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-+
-+ if (info->var.bits_per_pixel <= 8)
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ else
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+
-+ /* Re-initialize the DMA engine... */
-+ dev_dbg(info->device, " * update DMA engine\n");
-+ atmel_lcdfb_update_dma(info, &info->var);
-+
-+ /* ...set frame size and burst length = 8 words (?) */
-+ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
-+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
-+
-+ /* Now, the LCDC core... */
-+
-+ /* Set pixel clock */
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
-+
-+ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-+ value++;
-+
-+ value = (value / 2) - 1;
-+
-+ if (value <= 0) {
-+ dev_notice(info->device, "Bypassing pixel clock divider\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-+ } else
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+
-+ /* Initialize control register 2 */
-+ value = sinfo->default_lcdcon2;
-+
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVLINE_INVERTED;
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
-+
-+ switch (info->var.bits_per_pixel) {
-+ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
-+ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
-+ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
-+ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
-+ case 15: /* fall through */
-+ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
-+ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
-+ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
-+ default: BUG(); break;
-+ }
-+ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-+
-+ /* Vertical timing */
-+ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
-+ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
-+ value |= info->var.lower_margin;
-+ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-+
-+ /* Horizontal timing */
-+ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
-+ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
-+ value |= (info->var.left_margin - 1);
-+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-+
-+ /* Display size */
-+ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+ value |= info->var.yres - 1;
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-+
-+ /* FIFO Threshold: Use formula from data sheet */
-+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
-+ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-+
-+ /* Toggle LCD_MODE every frame */
-+ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-+
-+ /* Disable all interrupts */
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-+
-+ /* Set contrast */
-+ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-+ /* ...wait for DMA engine to become idle... */
-+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-+ msleep(10);
-+
-+ dev_dbg(info->device, " * re-enable DMA engine\n");
-+ /* ...and enable it with updated configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-+
-+ dev_dbg(info->device, " * re-enable LCDC core\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-+
-+ dev_dbg(info->device, " * DONE\n");
-+
-+ return 0;
-+}
-+
-+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
-+{
-+ chan &= 0xffff;
-+ chan >>= 16 - bf->length;
-+ return chan << bf->offset;
-+}
-+
-+/**
-+ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
-+ * @regno: Which register in the CLUT we are programming
-+ * @red: The red value which can be up to 16 bits wide
-+ * @green: The green value which can be up to 16 bits wide
-+ * @blue: The blue value which can be up to 16 bits wide.
-+ * @transp: If supported the alpha value which can be up to 16 bits wide.
-+ * @info: frame buffer info structure
-+ *
-+ * Set a single color register. The values supplied have a 16 bit
-+ * magnitude which needs to be scaled in this function for the hardware.
-+ * Things to take into consideration are how many color registers, if
-+ * any, are supported with the current color visual. With truecolor mode
-+ * no color palettes are supported. Here a psuedo palette is created
-+ * which we store the value in pseudo_palette in struct fb_info. For
-+ * pseudocolor mode we have a limited color palette. To deal with this
-+ * we can program what color is displayed for a particular pixel value.
-+ * DirectColor is similar in that we can program each color field. If
-+ * we have a static colormap we don't need to implement this function.
-+ *
-+ * Returns negative errno on error, or zero on success. In an
-+ * ideal world, this would have been the case, but as it turns
-+ * out, the other drivers return 1 on failure, so that's what
-+ * we're going to do.
-+ */
-+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned int val;
-+ u32 *pal;
-+ int ret = 1;
-+
-+ if (info->var.grayscale)
-+ red = green = blue = (19595 * red + 38470 * green
-+ + 7471 * blue) >> 16;
-+
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ if (regno < 16) {
-+ pal = info->pseudo_palette;
-+
-+ val = chan_to_field(red, &info->var.red);
-+ val |= chan_to_field(green, &info->var.green);
-+ val |= chan_to_field(blue, &info->var.blue);
-+
-+ pal[regno] = val;
-+ ret = 0;
-+ }
-+ break;
-+
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ if (regno < 256) {
-+ val = ((red >> 11) & 0x001f);
-+ val |= ((green >> 6) & 0x03e0);
-+ val |= ((blue >> 1) & 0x7c00);
-+
-+ /*
-+ * TODO: intensity bit. Maybe something like
-+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
-+ */
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+ ret = 0;
-+ }
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ dev_dbg(info->device, "%s\n", __func__);
-+
-+ atmel_lcdfb_update_dma(info, var);
-+
-+ return 0;
-+}
-+
-+static struct fb_ops atmel_lcdfb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = atmel_lcdfb_check_var,
-+ .fb_set_par = atmel_lcdfb_set_par,
-+ .fb_setcolreg = atmel_lcdfb_setcolreg,
-+ .fb_pan_display = atmel_lcdfb_pan_display,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
-+{
-+ struct fb_info *info = dev_id;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ u32 status;
-+
-+ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ int ret = 0;
-+
-+ memset_io(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ /* Allocate colormap */
-+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
-+ if (ret < 0)
-+ dev_err(info->device, "Alloc color map failed\n");
-+
-+ return ret;
-+}
-+
-+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+ if (sinfo->bus_clk)
-+ clk_enable(sinfo->bus_clk);
-+ clk_enable(sinfo->lcdc_clk);
-+}
-+
-+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+ if (sinfo->bus_clk)
-+ clk_disable(sinfo->bus_clk);
-+ clk_disable(sinfo->lcdc_clk);
-+}
-+
-+
-+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct atmel_lcdfb_info *sinfo;
-+ struct atmel_lcdfb_info *pdata_sinfo;
-+ struct resource *regs = NULL;
-+ struct resource *map = NULL;
-+ int ret;
-+
-+ dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
-+ if (!info) {
-+ dev_err(dev, "cannot allocate memory\n");
-+ goto out;
-+ }
-+
-+ sinfo = info->par;
-+
-+ if (dev->platform_data) {
-+ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
-+ sinfo->default_bpp = pdata_sinfo->default_bpp;
-+ sinfo->default_dmacon = pdata_sinfo->default_dmacon;
-+ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
-+ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
-+ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
-+ sinfo->guard_time = pdata_sinfo->guard_time;
-+ } else {
-+ dev_err(dev, "cannot get default configuration\n");
-+ goto free_info;
-+ }
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ strcpy(info->fix.id, sinfo->pdev->name);
-+ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
-+ info->pseudo_palette = sinfo->pseudo_palette;
-+ info->fbops = &atmel_lcdfb_ops;
-+
-+ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+ info->fix = atmel_lcdfb_fix;
-+
-+ /* Enable LCDC Clocks */
-+ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
-+ sinfo->bus_clk = clk_get(dev, "hck1");
-+ if (IS_ERR(sinfo->bus_clk)) {
-+ ret = PTR_ERR(sinfo->bus_clk);
-+ goto free_info;
-+ }
-+ }
-+ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
-+ if (IS_ERR(sinfo->lcdc_clk)) {
-+ ret = PTR_ERR(sinfo->lcdc_clk);
-+ goto put_bus_clk;
-+ }
-+ atmel_lcdfb_start_clock(sinfo);
-+
-+ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ info->monspecs.modedb_len, info->monspecs.modedb,
-+ sinfo->default_bpp);
-+ if (!ret) {
-+ dev_err(dev, "no suitable video mode found\n");
-+ goto stop_clk;
-+ }
-+
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(dev, "resources unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+ if (sinfo->irq_base < 0) {
-+ dev_err(dev, "unable to get irq\n");
-+ ret = sinfo->irq_base;
-+ goto stop_clk;
-+ }
-+
-+ /* Initialize video memory */
-+ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (map) {
-+ /* use a pre-allocated memory buffer */
-+ info->fix.smem_start = map->start;
-+ info->fix.smem_len = map->end - map->start + 1;
-+ if (!request_mem_region(info->fix.smem_start,
-+ info->fix.smem_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto stop_clk;
-+ }
-+
-+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
-+ if (!info->screen_base)
-+ goto release_intmem;
-+ } else {
-+ /* alocate memory buffer */
-+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
-+ goto stop_clk;
-+ }
-+ }
-+
-+ /* LCDC registers */
-+ info->fix.mmio_start = regs->start;
-+ info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "cannot map LCDC registers\n");
-+ goto release_mem;
-+ }
-+
-+ /* interrupt */
-+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
-+ if (ret) {
-+ dev_err(dev, "request_irq failed: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ ret = atmel_lcdfb_init_fbinfo(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "init fbinfo failed: %d\n", ret);
-+ goto unregister_irqs;
-+ }
-+
-+ /*
-+ * This makes sure that our colour bitfield
-+ * descriptors are correctly initialised.
-+ */
-+ atmel_lcdfb_check_var(&info->var, info);
-+
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "unable to set display parameters\n");
-+ goto free_cmap;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-+ goto free_cmap;
-+ }
-+
-+ /* Power up the LCDC screen */
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(1);
-+
-+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
-+
-+ return 0;
-+
-+
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ if (map)
-+ iounmap(info->screen_base);
-+ else
-+ atmel_lcdfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+ if (map)
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+ atmel_lcdfb_stop_clock(sinfo);
-+ clk_put(sinfo->lcdc_clk);
-+put_bus_clk:
-+ if (sinfo->bus_clk)
-+ clk_put(sinfo->bus_clk);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(0);
-+ unregister_framebuffer(info);
-+ atmel_lcdfb_stop_clock(sinfo);
-+ clk_put(sinfo->lcdc_clk);
-+ if (sinfo->bus_clk)
-+ clk_put(sinfo->bus_clk);
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+ iounmap(info->screen_base);
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+ } else {
-+ atmel_lcdfb_free_video_memory(sinfo);
-+ }
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+ .remove = __exit_p(atmel_lcdfb_remove),
-+ .driver = {
-+ .name = "atmel_lcdfb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_lcdfb_init(void)
-+{
-+ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
-+}
-+
-+static void __exit atmel_lcdfb_exit(void)
-+{
-+ platform_driver_unregister(&atmel_lcdfb_driver);
-+}
-+
-+module_init(atmel_lcdfb_init);
-+module_exit(atmel_lcdfb_exit);
-+
-+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 47d15b5..b59d5bb 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
- Enable this to be able to choose the drivers for controlling the
- backlight and the LCD panel on some platforms, for example on PDAs.
-
--config BACKLIGHT_CLASS_DEVICE
-- tristate "Lowlevel Backlight controls"
-+#
-+# LCD
-+#
-+config LCD_CLASS_DEVICE
-+ tristate "Lowlevel LCD controls"
- depends on BACKLIGHT_LCD_SUPPORT
- default m
- help
-- This framework adds support for low-level control of the LCD
-- backlight. This includes support for brightness and power.
-+ This framework adds support for low-level control of LCD.
-+ Some framebuffer devices connect to platform-specific LCD modules
-+ in order to have a platform-specific way to control the flat panel
-+ (contrast and applying power to the LCD (not to the backlight!)).
-
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-
--config LCD_CLASS_DEVICE
-- tristate "Lowlevel LCD controls"
-+config LCD_LTV350QV
-+ tristate "Samsung LTV350QV LCD Panel"
-+ depends on LCD_CLASS_DEVICE && SPI_MASTER
-+ default n
-+ help
-+ If you have a Samsung LTV350QV LCD panel, say y to include a
-+ power control driver for it. The panel starts up in power
-+ off state, so you need this driver in order to see any
-+ output.
-+
-+ The LTV350QV panel is present on all ATSTK1000 boards.
-+
-+#
-+# Backlight
-+#
-+config BACKLIGHT_CLASS_DEVICE
-+ tristate "Lowlevel Backlight controls"
- depends on BACKLIGHT_LCD_SUPPORT
- default m
- help
-- This framework adds support for low-level control of LCD.
-- Some framebuffer devices connect to platform-specific LCD modules
-- in order to have a platform-specific way to control the flat panel
-- (contrast and applying power to the LCD (not to the backlight!)).
-+ This framework adds support for low-level control of the LCD
-+ backlight. This includes support for brightness and power.
-
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index 0c3ce46..526c54b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
-
- obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-+
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..342b97a
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,340 @@
-+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+
-+#include "ltv350qv.h"
-+
-+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
-+
-+struct ltv350qv {
-+ struct spi_device *spi;
-+ u8 *buffer;
-+ int power;
-+ struct lcd_device *ld;
-+};
-+
-+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
-+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer index_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+ struct spi_transfer value_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+
-+ spi_message_init(&msg);
-+
-+ /* register index */
-+ lcd->buffer[0] = LTV_OPC_INDEX;
-+ lcd->buffer[1] = 0x00;
-+ lcd->buffer[2] = reg & 0x7f;
-+ index_xfer.tx_buf = lcd->buffer;
-+ spi_message_add_tail(&index_xfer, &msg);
-+
-+ /* register value */
-+ lcd->buffer[4] = LTV_OPC_DATA;
-+ lcd->buffer[5] = val >> 8;
-+ lcd->buffer[6] = val;
-+ value_xfer.tx_buf = lcd->buffer + 4;
-+ spi_message_add_tail(&value_xfer, &msg);
-+
-+ return spi_sync(lcd->spi, &msg);
-+}
-+
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
-+{
-+ int ret;
-+
-+ /* Power On Reset Display off State */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+ goto err;
-+ msleep(15);
-+
-+ /* Power Setting Function 1 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+ goto err;
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+ goto err_power1;
-+
-+ /* Power Setting Function 2 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5)))
-+ goto err_power2;
-+
-+ msleep(55);
-+
-+ /* Instruction Setting */
-+ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+ LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+ LTV_DS_SAME | LTV_CHS_480
-+ | LTV_DF_RGB | LTV_RGB_BGR);
-+ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+ LTV_VSPL_ACTIVE_LOW
-+ | LTV_HSPL_ACTIVE_LOW
-+ | LTV_DPL_SAMPLE_RISING
-+ | LTV_EPL_ACTIVE_LOW
-+ | LTV_SS_RIGHT_TO_LEFT);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+ if (ret)
-+ goto err_settings;
-+
-+ /* Wait more than 2 frames */
-+ msleep(20);
-+
-+ /* Display On Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+ if (ret)
-+ goto err_disp_on;
-+
-+ /* Display should now be ON. Phew. */
-+ return 0;
-+
-+err_disp_on:
-+ /*
-+ * Try to recover. Error handling probably isn't very useful
-+ * at this point, just make a best effort to switch the panel
-+ * off.
-+ */
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+ msleep(1);
-+err:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+ return -EIO;
-+}
-+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
-+{
-+ int ret;
-+
-+ /* Display Off Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE
-+ | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+
-+ /* Power down setting 1 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+
-+ /* Wait at least 1 ms */
-+ msleep(1);
-+
-+ /* Power down setting 2 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+
-+ /*
-+ * No point in trying to recover here. If we can't switch the
-+ * panel off, what are we supposed to do other than inform the
-+ * user about the failure?
-+ */
-+ if (ret)
-+ return -EIO;
-+
-+ /* Display power should now be OFF */
-+ return 0;
-+}
-+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
-+{
-+ int ret = 0;
-+
-+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_on(lcd);
-+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_off(lcd);
-+
-+ if (!ret)
-+ lcd->power = power;
-+
-+ return ret;
-+}
-+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
-+{
-+ struct ltv350qv *lcd;
-+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return ltv350qv_power(lcd, power);
-+}
-+
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+ struct ltv350qv *lcd;
-+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return lcd->power;
-+}
-+
-+static struct lcd_ops ltv_ops = {
-+ .get_power = ltv350qv_get_power,
-+ .set_power = ltv350qv_set_power,
-+};
-+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd;
-+ struct lcd_device *ld;
-+ int ret;
-+
-+ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+ if (!lcd)
-+ return -ENOMEM;
-+
-+ lcd->spi = spi;
-+ lcd->power = FB_BLANK_POWERDOWN;
-+ lcd->buffer = kzalloc(8, GFP_KERNEL);
-+
-+ ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
-+ if (IS_ERR(ld)) {
-+ ret = PTR_ERR(ld);
-+ goto out_free_lcd;
-+ }
-+ lcd->ld = ld;
-+
-+ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+ if (ret)
-+ goto out_unregister;
-+
-+ dev_set_drvdata(&spi->dev, lcd);
-+
-+ return 0;
-+
-+out_unregister:
-+ lcd_device_unregister(ld);
-+out_free_lcd:
-+ kfree(lcd);
-+ return ret;
-+}
-+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+ lcd_device_unregister(lcd->ld);
-+ kfree(lcd);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+ pm_message_t state, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ if (level == SUSPEND_POWER_DOWN)
-+ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+
-+ return 0;
-+}
-+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ if (level == RESUME_POWER_ON)
-+ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+
-+ return 0;
-+}
-+#else
-+#define ltv350qv_suspend NULL
-+#define ltv350qv_resume NULL
-+#endif
-+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+}
-+
-+static struct spi_driver ltv350qv_driver = {
-+ .driver = {
-+ .name = "ltv350qv",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .probe = ltv350qv_probe,
-+ .remove = __devexit_p(ltv350qv_remove),
-+ .shutdown = ltv350qv_shutdown,
-+ .suspend = ltv350qv_suspend,
-+ .resume = ltv350qv_resume,
-+};
-+
-+static int __init ltv350qv_init(void)
-+{
-+ return spi_register_driver(&ltv350qv_driver);
-+}
-+
-+static void __exit ltv350qv_exit(void)
-+{
-+ spi_unregister_driver(&ltv350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
-new file mode 100644
-index 0000000..189112e
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
-+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX 0x74
-+#define LTV_OPC_DATA 0x76
-+
-+#define LTV_ID 0x00 /* ID Read */
-+#define LTV_IFCTL 0x01 /* Display Interface Control */
-+#define LTV_DATACTL 0x02 /* Display Data Control */
-+#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
-+#define LTV_GATECTL1 0x04 /* Gate Control 1 */
-+#define LTV_GATECTL2 0x05 /* Gate Control 2 */
-+#define LTV_VBP 0x06 /* Vertical Back Porch */
-+#define LTV_HBP 0x07 /* Horizontal Back Porch */
-+#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
-+#define LTV_PWRCTL1 0x09 /* Power Control 1 */
-+#define LTV_PWRCTL2 0x0a /* Power Control 2 */
-+#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM (1 << 15)
-+#define LTV_NMD (1 << 14)
-+#define LTV_SSMD (1 << 13)
-+#define LTV_REV (1 << 7)
-+#define LTV_NL(x) (((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME (0 << 12)
-+#define LTV_DS_D_TO_S (1 << 12)
-+#define LTV_DS_S_TO_D (2 << 12)
-+#define LTV_CHS_384 (0 << 9)
-+#define LTV_CHS_480 (1 << 9)
-+#define LTV_CHS_492 (2 << 9)
-+#define LTV_DF_RGB (0 << 6)
-+#define LTV_DF_RGBX (1 << 6)
-+#define LTV_DF_XRGB (2 << 6)
-+#define LTV_RGB_RGB (0 << 2)
-+#define LTV_RGB_BGR (1 << 2)
-+#define LTV_RGB_GRB (2 << 2)
-+#define LTV_RGB_RBG (3 << 2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW (0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW (0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
-+#define LTV_DPL_SAMPLE_RISING (0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING (1 << 13)
-+#define LTV_EPL_ACTIVE_LOW (0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH (1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
-+#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
-+#define LTV_STB (1 << 1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x) (((x) & 0x0007) << 12)
-+#define LTV_GAON (1 << 5)
-+#define LTV_SDR (1 << 3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME (0 << 14)
-+#define LTV_NW_INV_1LINE (1 << 14)
-+#define LTV_NW_INV_2LINE (2 << 14)
-+#define LTV_DSC (1 << 12)
-+#define LTV_GIF (1 << 8)
-+#define LTV_FHN (1 << 7)
-+#define LTV_FTI(x) (((x) & 0x0003) << 4)
-+#define LTV_FWI(x) (((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x) (((x) & 0x0007) << 10)
-+#define LTV_EQ(x) (((x) & 0x0007) << 2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE (1 << 14)
-+#define LTV_VCOMOUT_ENABLE (1 << 11)
-+#define LTV_POWER_ON (1 << 9)
-+#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE (1 << 13)
-+#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
-index 2822526..babf8a9 100644
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
-@@ -1198,6 +1198,10 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
- pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
- #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-+#elif defined(__avr32__)
-+ vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
-+ & ~_PAGE_CACHABLE)
-+ | (_PAGE_BUFFER | _PAGE_DIRTY));
- #elif defined(__ia64__)
- if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h
-index 49ac9be..616d206 100644
---- a/include/asm-alpha/pgtable.h
-+++ b/include/asm-alpha/pgtable.h
-@@ -345,10 +345,6 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
- #define io_remap_pfn_range(vma, start, pfn, size, prot) \
- remap_pfn_range(vma, start, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define pte_ERROR(e) \
- printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
- #define pmd_ERROR(e) \
-diff --git a/include/asm-alpha/scatterlist.h b/include/asm-alpha/scatterlist.h
-index 6afb8bd..9173654 100644
---- a/include/asm-alpha/scatterlist.h
-+++ b/include/asm-alpha/scatterlist.h
-@@ -2,6 +2,7 @@
- #define _ALPHA_SCATTERLIST_H
-
- #include <asm/page.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
-index d464ca5..7ef4eeb 100644
---- a/include/asm-arm/arch-at91/cpu.h
-+++ b/include/asm-arm/arch-at91/cpu.h
-@@ -68,4 +68,10 @@ static inline unsigned long at91_arch_identify(void)
- #define cpu_is_at91sam9263() (0)
- #endif
-
-+/*
-+ * Since this is ARM, we will never run on any AVR32 CPU. But these
-+ * definitions may reduce clutter in common drivers.
-+ */
-+#define cpu_is_at32ap7000() (0)
-+
- #endif
-diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
-index 7b1c9ac..0c8be19 100644
---- a/include/asm-arm/pgtable-nommu.h
-+++ b/include/asm-arm/pgtable-nommu.h
-@@ -83,10 +83,6 @@ extern int is_in_rom(unsigned long);
- #define io_remap_page_range remap_page_range
- #define io_remap_pfn_range remap_pfn_range
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
-
- /*
- * All 32bit addresses are effectively valid for vmalloc...
-diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
-index 7b2bafc..21dec9f 100644
---- a/include/asm-arm/pgtable.h
-+++ b/include/asm-arm/pgtable.h
-@@ -395,10 +395,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
- #define io_remap_pfn_range(vma,from,pfn,size,prot) \
- remap_pfn_range(vma, from, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define pgtable_cache_init() do { } while (0)
-
- #endif /* !__ASSEMBLY__ */
-diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
-index 63a8881..2b20e9f 100644
---- a/include/asm-arm26/pgtable.h
-+++ b/include/asm-arm26/pgtable.h
-@@ -297,10 +297,6 @@ static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
- #define io_remap_pfn_range(vma,from,pfn,size,prot) \
- remap_pfn_range(vma, from, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #endif /* !__ASSEMBLY__ */
-
- #endif /* _ASMARM_PGTABLE_H */
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 1a7b07d..2293ab0 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
-
- #include <linux/types.h>
-
-+#define GPIO_PIN_NONE (-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
-
-@@ -30,11 +32,46 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-
--struct lcdc_platform_data {
-- unsigned long fbmem_start;
-- unsigned long fbmem_size;
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+struct platform_device *at32_add_device_usba(unsigned int id);
-+
-+struct atmel_lcdfb_info;
-+struct platform_device *
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len);
-+
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
-+struct cf_platform_data {
-+ int detect_pin;
-+ int reset_pin;
-+ int vcc_pin;
-+ u8 cs;
- };
- struct platform_device *
--at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
-+at32_add_device_cf(unsigned int id, unsigned int extint,
-+ struct cf_platform_data *data);
-+
-+/* depending on what's hooked up, not all SSC pins will be used */
-+#define ATMEL_SSC_TK 0x01
-+#define ATMEL_SSC_TF 0x02
-+#define ATMEL_SSC_TD 0x04
-+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-+
-+#define ATMEL_SSC_RK 0x10
-+#define ATMEL_SSC_RF 0x20
-+#define ATMEL_SSC_RD 0x40
-+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-+
-+struct platform_device *
-+at32_add_device_ssc(unsigned int id, unsigned int flags);
-
- #endif /* __ASM_ARCH_BOARD_H */
-diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
-new file mode 100644
-index 0000000..2bdc5bd
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/cpu.h
-@@ -0,0 +1,33 @@
-+/*
-+ * AVR32 and (fake) AT91 CPU identification
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_ARCH_CPU_H
-+#define __ASM_ARCH_CPU_H
-+
-+/*
-+ * Only AT32AP7000 is defined for now. We can identify the specific
-+ * chip at runtime, but I'm not sure if it's really worth it.
-+ */
-+#ifdef CONFIG_CPU_AT32AP7000
-+# define cpu_is_at32ap7000() (1)
-+#else
-+# define cpu_is_at32ap7000() (0)
-+#endif
-+
-+/*
-+ * Since this is AVR32, we will never run on any AT91 CPU. But these
-+ * definitions may reduce clutter in common drivers.
-+ */
-+#define cpu_is_at91rm9200() (0)
-+#define cpu_is_at91sam9xe() (0)
-+#define cpu_is_at91sam9260() (0)
-+#define cpu_is_at91sam9261() (0)
-+#define cpu_is_at91sam9263() (0)
-+
-+#endif /* __ASM_ARCH_CPU_H */
-diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h
-index 80a21aa..af7f953 100644
---- a/include/asm-avr32/arch-at32ap/gpio.h
-+++ b/include/asm-avr32/arch-at32ap/gpio.h
-@@ -14,6 +14,8 @@ int gpio_direction_output(unsigned int gpio, int value);
- int gpio_get_value(unsigned int gpio);
- void gpio_set_value(unsigned int gpio, int value);
-
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
- static inline int gpio_to_irq(unsigned int gpio)
- {
- return gpio + GPIO_IRQ_BASE;
-diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
-new file mode 100644
-index 0000000..ee59e40
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/io.h
-@@ -0,0 +1,39 @@
-+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
-+#define __ASM_AVR32_ARCH_AT32AP_IO_H
-+
-+/* For "bizarre" halfword swapping */
-+#include <linux/byteorder/swabb.h>
-+
-+#if defined(CONFIG_AP7000_32_BIT_SMC)
-+# define __swizzle_addr_b(addr) (addr ^ 3UL)
-+# define __swizzle_addr_w(addr) (addr ^ 2UL)
-+# define __swizzle_addr_l(addr) (addr)
-+# define ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define __mem_ioswabw(a, x) swab16(x)
-+# define __mem_ioswabl(a, x) swab32(x)
-+#elif defined(CONFIG_AP7000_16_BIT_SMC)
-+# define __swizzle_addr_b(addr) (addr ^ 1UL)
-+# define __swizzle_addr_w(addr) (addr)
-+# define __swizzle_addr_l(addr) (addr)
-+# define ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define ioswabl(a, x) swahw32(x)
-+# define __mem_ioswabb(a, x) (x)
-+# define __mem_ioswabw(a, x) swab16(x)
-+# define __mem_ioswabl(a, x) swahb32(x)
-+#else
-+# define __swizzle_addr_b(addr) (addr)
-+# define __swizzle_addr_w(addr) (addr)
-+# define __swizzle_addr_l(addr) (addr)
-+# define ioswabb(a, x) (x)
-+# define ioswabw(a, x) swab16(x)
-+# define ioswabl(a, x) swab32(x)
-+# define __mem_ioswabb(a, x) (x)
-+# define __mem_ioswabw(a, x) (x)
-+# define __mem_ioswabl(a, x) (x)
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
-diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
-index 3732b32..07152b7 100644
---- a/include/asm-avr32/arch-at32ap/smc.h
-+++ b/include/asm-avr32/arch-at32ap/smc.h
-@@ -48,10 +48,32 @@ struct smc_config {
- unsigned int nwe_controlled:1;
-
- /*
-+ * 0: NWAIT is disabled
-+ * 1: Reserved
-+ * 2: NWAIT is frozen mode
-+ * 3: NWAIT in ready mode
-+ */
-+ unsigned int nwait_mode:2;
-+
-+ /*
- * 0: Byte select access type
- * 1: Byte write access type
- */
- unsigned int byte_write:1;
-+
-+ /*
-+ * Number of clock cycles before data is released after
-+ * the rising edge of the read controlling signal
-+ *
-+ * Total cycles from SMC is tdf_cycles + 1
-+ */
-+ unsigned int tdf_cycles:4;
-+
-+ /*
-+ * 0: TDF optimization disabled
-+ * 1: TDF optimization enabled
-+ */
-+ unsigned int tdf_mode:1;
- };
-
- extern int smc_set_configuration(int cs, const struct smc_config *config);
-diff --git a/include/asm-avr32/arch-at32ap/time.h b/include/asm-avr32/arch-at32ap/time.h
-new file mode 100644
-index 0000000..cc8a434
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/time.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
-+#define _ASM_AVR32_ARCH_AT32AP_TIME_H
-+
-+#include <linux/platform_device.h>
-+
-+extern struct irqaction timer_irqaction;
-+extern struct platform_device at32_systc0_device;
-+extern void local_timer_interrupt(int irq, void *dev_id);
-+
-+#define TIMER_BCR 0x000000c0
-+#define TIMER_BCR_SYNC 0
-+#define TIMER_BMR 0x000000c4
-+#define TIMER_BMR_TC0XC0S 0
-+#define TIMER_BMR_TC1XC1S 2
-+#define TIMER_BMR_TC2XC2S 4
-+#define TIMER_CCR 0x00000000
-+#define TIMER_CCR_CLKDIS 1
-+#define TIMER_CCR_CLKEN 0
-+#define TIMER_CCR_SWTRG 2
-+#define TIMER_CMR 0x00000004
-+#define TIMER_CMR_ABETRG 10
-+#define TIMER_CMR_ACPA 16
-+#define TIMER_CMR_ACPC 18
-+#define TIMER_CMR_AEEVT 20
-+#define TIMER_CMR_ASWTRG 22
-+#define TIMER_CMR_BCPB 24
-+#define TIMER_CMR_BCPC 26
-+#define TIMER_CMR_BEEVT 28
-+#define TIMER_CMR_BSWTRG 30
-+#define TIMER_CMR_BURST 4
-+#define TIMER_CMR_CLKI 3
-+#define TIMER_CMR_CPCDIS 7
-+#define TIMER_CMR_CPCSTOP 6
-+#define TIMER_CMR_CPCTRG 14
-+#define TIMER_CMR_EEVT 10
-+#define TIMER_CMR_EEVTEDG 8
-+#define TIMER_CMR_ENETRG 12
-+#define TIMER_CMR_ETRGEDG 8
-+#define TIMER_CMR_LDBDIS 7
-+#define TIMER_CMR_LDBSTOP 6
-+#define TIMER_CMR_LDRA 16
-+#define TIMER_CMR_LDRB 18
-+#define TIMER_CMR_TCCLKS 0
-+#define TIMER_CMR_WAVE 15
-+#define TIMER_CMR_WAVSEL 13
-+#define TIMER_CV 0x00000010
-+#define TIMER_CV_CV 0
-+#define TIMER_IDR 0x00000028
-+#define TIMER_IDR_COVFS 0
-+#define TIMER_IDR_CPAS 2
-+#define TIMER_IDR_CPBS 3
-+#define TIMER_IDR_CPCS 4
-+#define TIMER_IDR_ETRGS 7
-+#define TIMER_IDR_LDRAS 5
-+#define TIMER_IDR_LDRBS 6
-+#define TIMER_IDR_LOVRS 1
-+#define TIMER_IER 0x00000024
-+#define TIMER_IER_COVFS 0
-+#define TIMER_IER_CPAS 2
-+#define TIMER_IER_CPBS 3
-+#define TIMER_IER_CPCS 4
-+#define TIMER_IER_ETRGS 7
-+#define TIMER_IER_LDRAS 5
-+#define TIMER_IER_LDRBS 6
-+#define TIMER_IER_LOVRS 1
-+#define TIMER_IMR 0x0000002c
-+#define TIMER_IMR_COVFS 0
-+#define TIMER_IMR_CPAS 2
-+#define TIMER_IMR_CPBS 3
-+#define TIMER_IMR_CPCS 4
-+#define TIMER_IMR_ETRGS 7
-+#define TIMER_IMR_LDRAS 5
-+#define TIMER_IMR_LDRBS 6
-+#define TIMER_IMR_LOVRS 1
-+#define TIMER_RA 0x00000014
-+#define TIMER_RA_RA 0
-+#define TIMER_RB 0x00000018
-+#define TIMER_RB_RB 0
-+#define TIMER_RC 0x0000001c
-+#define TIMER_RC_RC 0
-+#define TIMER_SR 0x00000020
-+#define TIMER_SR_CLKSTA 16
-+#define TIMER_SR_COVFS 0
-+#define TIMER_SR_CPAS 2
-+#define TIMER_SR_CPBS 3
-+#define TIMER_SR_CPCS 4
-+#define TIMER_SR_ETRGS 7
-+#define TIMER_SR_LDRAS 5
-+#define TIMER_SR_LDRBS 6
-+#define TIMER_SR_LOVRS 1
-+#define TIMER_SR_MTIOA 17
-+#define TIMER_SR_MTIOB 18
-+
-+/* Bit manipulation macros */
-+#define TIMER_BIT(name) (1 << TIMER_##name)
-+#define TIMER_BF(name,value) ((value) << TIMER_##name)
-+
-+/* Register access macros */
-+#define timer_read(port,instance,reg) \
-+ __raw_readl(port + (0x40 * instance) + TIMER_##reg)
-+#define timer_write(port,instance,reg,value) \
-+ __raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
-+
-+#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
-diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
-index c40b603..b9c2548 100644
---- a/include/asm-avr32/atomic.h
-+++ b/include/asm-avr32/atomic.h
-@@ -173,7 +173,7 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v)
- }
-
- #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
--#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-
- #define atomic_sub(i, v) (void)atomic_sub_return(i, v)
- #define atomic_add(i, v) (void)atomic_add_return(i, v)
-diff --git a/include/asm-avr32/bug.h b/include/asm-avr32/bug.h
-index 521766b..afdcd79 100644
---- a/include/asm-avr32/bug.h
-+++ b/include/asm-avr32/bug.h
-@@ -18,27 +18,53 @@
-
- #ifdef CONFIG_DEBUG_BUGVERBOSE
-
--#define BUG() \
-- do { \
-- asm volatile(".hword %0\n\t" \
-- ".hword %1\n\t" \
-- ".long %2" \
-- : \
-- : "n"(AVR32_BUG_OPCODE), \
-- "i"(__LINE__), "X"(__FILE__)); \
-- } while (0)
-+#define _BUG_OR_WARN(flags) \
-+ asm volatile( \
-+ "1: .hword %0\n" \
-+ " .section __bug_table,\"a\",@progbits\n" \
-+ "2: .long 1b\n" \
-+ " .long %1\n" \
-+ " .short %2\n" \
-+ " .short %3\n" \
-+ " .org 2b + %4\n" \
-+ " .previous" \
-+ : \
-+ : "i"(AVR32_BUG_OPCODE), "i"(__FILE__), \
-+ "i"(__LINE__), "i"(flags), \
-+ "i"(sizeof(struct bug_entry)))
-
- #else
-
-+#define _BUG_OR_WARN(flags) \
-+ asm volatile( \
-+ "1: .hword %0\n" \
-+ " .section __bug_table,\"a\",@progbits\n" \
-+ "2: .long 1b\n" \
-+ " .short %1\n" \
-+ " .org 2b + %2\n" \
-+ " .previous" \
-+ : \
-+ : "i"(AVR32_BUG_OPCODE), "i"(flags), \
-+ "i"(sizeof(struct bug_entry)))
-+
-+#endif /* CONFIG_DEBUG_BUGVERBOSE */
-+
- #define BUG() \
- do { \
-- asm volatile(".hword %0\n\t" \
-- : : "n"(AVR32_BUG_OPCODE)); \
-+ _BUG_OR_WARN(0); \
-+ for (;;); \
- } while (0)
-
--#endif /* CONFIG_DEBUG_BUGVERBOSE */
-+#define WARN_ON(condition) \
-+ ({ \
-+ typeof(condition) __ret_warn_on = (condition); \
-+ if (unlikely(__ret_warn_on)) \
-+ _BUG_OR_WARN(BUGFLAG_WARNING); \
-+ unlikely(__ret_warn_on); \
-+ })
-
- #define HAVE_ARCH_BUG
-+#define HAVE_ARCH_WARN_ON
-
- #endif /* CONFIG_BUG */
-
-diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
-new file mode 100644
-index 0000000..56a4965
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
-+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
-+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
-+
-+ unsigned short channel;
-+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+ struct dma_request req;
-+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
-+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+ struct dma_request req;
-+
-+ int periods;
-+ unsigned long buffer_size;
-+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
-+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
-+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+ struct dma_request req;
-+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
-+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
-+
-+ size_t length;
-+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
-+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+ dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
-+{
-+ return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
-+{
-+ return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
-index c08e810..e30d4b3 100644
---- a/include/asm-avr32/io.h
-+++ b/include/asm-avr32/io.h
-@@ -1,13 +1,15 @@
- #ifndef __ASM_AVR32_IO_H
- #define __ASM_AVR32_IO_H
-
-+#include <linux/kernel.h>
- #include <linux/string.h>
--
--#ifdef __KERNEL__
-+#include <linux/types.h>
-
- #include <asm/addrspace.h>
- #include <asm/byteorder.h>
-
-+#include <asm/arch/io.h>
-+
- /* virt_to_phys will only work when address is in P1 or P2 */
- static __inline__ unsigned long virt_to_phys(volatile void *address)
- {
-@@ -36,104 +38,215 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
- extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
- extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
--static inline void writeb(unsigned char b, volatile void __iomem *addr)
-+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned char __force *)addr = b;
-+ *(volatile u8 __force *)addr = v;
- }
--static inline void writew(unsigned short b, volatile void __iomem *addr)
-+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned short __force *)addr = b;
-+ *(volatile u16 __force *)addr = v;
- }
--static inline void writel(unsigned int b, volatile void __iomem *addr)
-+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned int __force *)addr = b;
-+ *(volatile u32 __force *)addr = v;
- }
--#define __raw_writeb writeb
--#define __raw_writew writew
--#define __raw_writel writel
-
--static inline unsigned char readb(const volatile void __iomem *addr)
-+static inline u8 __raw_readb(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned char __force *)addr;
-+ return *(const volatile u8 __force *)addr;
- }
--static inline unsigned short readw(const volatile void __iomem *addr)
-+static inline u16 __raw_readw(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned short __force *)addr;
-+ return *(const volatile u16 __force *)addr;
- }
--static inline unsigned int readl(const volatile void __iomem *addr)
-+static inline u32 __raw_readl(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned int __force *)addr;
-+ return *(const volatile u32 __force *)addr;
-+}
-+
-+/* Convert I/O port address to virtual address */
-+#ifndef __io
-+# define __io(p) ((void *)phys_to_uncached(p))
-+#endif
-+
-+/*
-+ * Not really sure about the best way to slow down I/O on
-+ * AVR32. Defining it as a no-op until we have an actual test case.
-+ */
-+#define SLOW_DOWN_IO do { } while (0)
-+
-+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \
-+static inline void \
-+pfx##write##bwl(type val, volatile void __iomem *addr) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
-+ __val = pfx##ioswab##bwl(__addr, val); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ *__addr = __val; \
-+} \
-+ \
-+static inline type pfx##read##bwl(const volatile void __iomem *addr) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ __val = *__addr; \
-+ return pfx##ioswab##bwl(__addr, __val); \
-+}
-+
-+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \
-+static inline void pfx##out##bwl##p(type val, unsigned long port) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = __io(__swizzle_addr_##bwl(port)); \
-+ __val = pfx##ioswab##bwl(__addr, val); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ *__addr = __val; \
-+ slow; \
-+} \
-+ \
-+static inline type pfx##in##bwl##p(unsigned long port) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = __io(__swizzle_addr_##bwl(port)); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ __val = *__addr; \
-+ slow; \
-+ \
-+ return pfx##ioswab##bwl(__addr, __val); \
-+}
-+
-+#define __BUILD_MEMORY_PFX(bus, bwl, type) \
-+ __BUILD_MEMORY_SINGLE(bus, bwl, type)
-+
-+#define BUILDIO_MEM(bwl, type) \
-+ __BUILD_MEMORY_PFX(, bwl, type) \
-+ __BUILD_MEMORY_PFX(__mem_, bwl, type)
-+
-+#define __BUILD_IOPORT_PFX(bus, bwl, type) \
-+ __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \
-+ __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
-+
-+#define BUILDIO_IOPORT(bwl, type) \
-+ __BUILD_IOPORT_PFX(, bwl, type) \
-+ __BUILD_IOPORT_PFX(__mem_, bwl, type)
-+
-+BUILDIO_MEM(b, u8)
-+BUILDIO_MEM(w, u16)
-+BUILDIO_MEM(l, u32)
-+
-+BUILDIO_IOPORT(b, u8)
-+BUILDIO_IOPORT(w, u16)
-+BUILDIO_IOPORT(l, u32)
-+
-+#define readb_relaxed readb
-+#define readw_relaxed readw
-+#define readl_relaxed readl
-+
-+#define __BUILD_MEMORY_STRING(bwl, type) \
-+static inline void writes##bwl(volatile void __iomem *addr, \
-+ const void *data, unsigned int count) \
-+{ \
-+ const type *__data = data; \
-+ \
-+ while (count--) \
-+ __mem_write##bwl(*__data++, addr); \
-+} \
-+ \
-+static inline void reads##bwl(const volatile void __iomem *addr, \
-+ void *data, unsigned int count) \
-+{ \
-+ type *__data = data; \
-+ \
-+ while (count--) \
-+ *__data++ = __mem_read##bwl(addr); \
- }
--#define __raw_readb readb
--#define __raw_readw readw
--#define __raw_readl readl
-
--#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
--#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
--#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l)
-+#define __BUILD_IOPORT_STRING(bwl, type) \
-+static inline void outs##bwl(unsigned long port, const void *data, \
-+ unsigned int count) \
-+{ \
-+ const type *__data = data; \
-+ \
-+ while (count--) \
-+ __mem_out##bwl(*__data++, port); \
-+} \
-+ \
-+static inline void ins##bwl(unsigned long port, void *data, \
-+ unsigned int count) \
-+{ \
-+ type *__data = data; \
-+ \
-+ while (count--) \
-+ *__data++ = __mem_in##bwl(port); \
-+}
-
--#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l)
--#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l)
--#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l)
-+#define BUILDSTRING(bwl, type) \
-+ __BUILD_MEMORY_STRING(bwl, type) \
-+ __BUILD_IOPORT_STRING(bwl, type)
-
-+BUILDSTRING(b, u8)
-+BUILDSTRING(w, u16)
-+BUILDSTRING(l, u32)
-
- /*
- * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
- */
- #ifndef ioread8
-
--#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; })
-+#define ioread8(p) ((unsigned int)readb(p))
-
--#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
--#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; })
-+#define ioread16(p) ((unsigned int)readw(p))
-+#define ioread16be(p) ((unsigned int)__raw_readw(p))
-
--#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
--#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; })
-+#define ioread32(p) ((unsigned int)readl(p))
-+#define ioread32be(p) ((unsigned int)__raw_readl(p))
-
--#define iowrite8(v,p) __raw_writeb(v, p)
-+#define iowrite8(v,p) writeb(v, p)
-
--#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p)
--#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p)
-+#define iowrite16(v,p) writew(v, p)
-+#define iowrite16be(v,p) __raw_writew(v, p)
-
--#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p)
--#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p)
-+#define iowrite32(v,p) writel(v, p)
-+#define iowrite32be(v,p) __raw_writel(v, p)
-
--#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
--#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
--#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
-+#define ioread8_rep(p,d,c) readsb(p,d,c)
-+#define ioread16_rep(p,d,c) readsw(p,d,c)
-+#define ioread32_rep(p,d,c) readsl(p,d,c)
-
--#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c)
--#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c)
--#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c)
-+#define iowrite8_rep(p,s,c) writesb(p,s,c)
-+#define iowrite16_rep(p,s,c) writesw(p,s,c)
-+#define iowrite32_rep(p,s,c) writesl(p,s,c)
-
- #endif
-
--
--/*
-- * These two are only here because ALSA _thinks_ it needs them...
-- */
- static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
- unsigned long count)
- {
-- char *p = to;
-- while (count) {
-- count--;
-- *p = readb(from);
-- p++;
-- from++;
-- }
-+ memcpy(to, (const void __force *)from, count);
- }
-
- static inline void memcpy_toio(volatile void __iomem *to, const void * from,
- unsigned long count)
- {
-- const char *p = from;
-- while (count) {
-- count--;
-- writeb(*p, to);
-- p++;
-- to++;
-- }
-+ memcpy((void __force *)to, from, count);
- }
-
- static inline void memset_io(volatile void __iomem *addr, unsigned char val,
-@@ -142,99 +255,8 @@ static inline void memset_io(volatile void __iomem *addr, unsigned char val,
- memset((void __force *)addr, val, count);
- }
-
--/*
-- * Bad read/write accesses...
-- */
--extern void __readwrite_bug(const char *fn);
--
- #define IO_SPACE_LIMIT 0xffffffff
-
--/* Convert I/O port address to virtual address */
--#define __io(p) ((void __iomem *)phys_to_uncached(p))
--
--/*
-- * IO port access primitives
-- * -------------------------
-- *
-- * The AVR32 doesn't have special IO access instructions; all IO is memory
-- * mapped. Note that these are defined to perform little endian accesses
-- * only. Their primary purpose is to access PCI and ISA peripherals.
-- *
-- * Note that for a big endian machine, this implies that the following
-- * big endian mode connectivity is in place.
-- *
-- * The machine specific io.h include defines __io to translate an "IO"
-- * address to a memory address.
-- *
-- * Note that we prevent GCC re-ordering or caching values in expressions
-- * by introducing sequence points into the in*() definitions. Note that
-- * __raw_* do not guarantee this behaviour.
-- *
-- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
-- */
--#define outb(v, p) __raw_writeb(v, __io(p))
--#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
--#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
--
--#define inb(p) __raw_readb(__io(p))
--#define inw(p) le16_to_cpu(__raw_readw(__io(p)))
--#define inl(p) le32_to_cpu(__raw_readl(__io(p)))
--
--static inline void __outsb(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- outb(*(u8 *)addr, port);
-- addr++;
-- }
--}
--
--static inline void __insb(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- *(u8 *)addr = inb(port);
-- addr++;
-- }
--}
--
--static inline void __outsw(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- outw(*(u16 *)addr, port);
-- addr += 2;
-- }
--}
--
--static inline void __insw(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- *(u16 *)addr = inw(port);
-- addr += 2;
-- }
--}
--
--static inline void __outsl(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- outl(*(u32 *)addr, port);
-- addr += 4;
-- }
--}
--
--static inline void __insl(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- *(u32 *)addr = inl(port);
-- addr += 4;
-- }
--}
--
--#define outsb(port, addr, count) __outsb(port, addr, count)
--#define insb(port, addr, count) __insb(port, addr, count)
--#define outsw(port, addr, count) __outsw(port, addr, count)
--#define insw(port, addr, count) __insw(port, addr, count)
--#define outsl(port, addr, count) __outsl(port, addr, count)
--#define insl(port, addr, count) __insl(port, addr, count)
--
- extern void __iomem *__ioremap(unsigned long offset, size_t size,
- unsigned long flags);
- extern void __iounmap(void __iomem *addr);
-@@ -292,6 +314,4 @@ extern void __iounmap(void __iomem *addr);
- */
- #define xlate_dev_kmem_ptr(p) p
-
--#endif /* __KERNEL__ */
--
- #endif /* __ASM_AVR32_IO_H */
-diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
-index f583b64..a8c2f5e 100644
---- a/include/asm-avr32/kdebug.h
-+++ b/include/asm-avr32/kdebug.h
-@@ -12,16 +12,12 @@ struct die_args {
-
- int register_die_notifier(struct notifier_block *nb);
- int unregister_die_notifier(struct notifier_block *nb);
--int register_page_fault_notifier(struct notifier_block *nb);
--int unregister_page_fault_notifier(struct notifier_block *nb);
- extern struct atomic_notifier_head avr32_die_chain;
-
- /* Grossly misnamed. */
- enum die_val {
-- DIE_FAULT,
- DIE_BREAKPOINT,
- DIE_SSTEP,
-- DIE_PAGE_FAULT,
- };
-
- static inline int notify_die(enum die_val val, struct pt_regs *regs,
-@@ -35,4 +31,18 @@ static inline int notify_die(enum die_val val, struct pt_regs *regs,
- return atomic_notifier_call_chain(&avr32_die_chain, val, &args);
- }
-
-+/*
-+ * These are only here because kprobes.c wants them to implement a
-+ * blatant layering violation. Will hopefully go away soon once all
-+ * architectures are updated.
-+ */
-+static inline int register_page_fault_notifier(struct notifier_block *nb)
-+{
-+ return 0;
-+}
-+static inline int unregister_page_fault_notifier(struct notifier_block *nb)
-+{
-+ return 0;
-+}
-+
- #endif /* __ASM_AVR32_KDEBUG_H */
-diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h
-index 09a5cbe..190a637 100644
---- a/include/asm-avr32/kprobes.h
-+++ b/include/asm-avr32/kprobes.h
-@@ -26,6 +26,7 @@ struct arch_specific_insn {
- kprobe_opcode_t insn[MAX_INSN_SIZE];
- };
-
-+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
- extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-
-diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
-index 6b8ca9d..f6cc2b0 100644
---- a/include/asm-avr32/pgtable.h
-+++ b/include/asm-avr32/pgtable.h
-@@ -394,10 +394,6 @@ typedef pte_t *pte_addr_t;
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /* No page table caches to initialize (?) */
- #define pgtable_cache_init() do { } while(0)
-
-diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
-index f691377..6a64833 100644
---- a/include/asm-avr32/processor.h
-+++ b/include/asm-avr32/processor.h
-@@ -40,6 +40,14 @@ enum tlb_config {
- TLB_INVALID
- };
-
-+#define AVR32_FEATURE_RMW (1 << 0)
-+#define AVR32_FEATURE_DSP (1 << 1)
-+#define AVR32_FEATURE_SIMD (1 << 2)
-+#define AVR32_FEATURE_OCD (1 << 3)
-+#define AVR32_FEATURE_PCTR (1 << 4)
-+#define AVR32_FEATURE_JAVA (1 << 5)
-+#define AVR32_FEATURE_FPU (1 << 6)
-+
- struct avr32_cpuinfo {
- struct clk *clk;
- unsigned long loops_per_jiffy;
-@@ -48,6 +56,7 @@ struct avr32_cpuinfo {
- unsigned short arch_revision;
- unsigned short cpu_revision;
- enum tlb_config tlb_config;
-+ unsigned long features;
-
- struct cache_info icache;
- struct cache_info dcache;
-@@ -125,10 +134,10 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
- #define thread_saved_pc(tsk) ((tsk)->thread.cpu_context.pc)
-
- struct pt_regs;
--void show_trace(struct task_struct *task, unsigned long *stack,
-- struct pt_regs *regs);
--
- extern unsigned long get_wchan(struct task_struct *p);
-+extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
-+extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-+ struct pt_regs *regs, const char *log_lvl);
-
- #define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc)
- #define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp)
-diff --git a/include/asm-avr32/scatterlist.h b/include/asm-avr32/scatterlist.h
-index bfe7d75..c6d5ce3 100644
---- a/include/asm-avr32/scatterlist.h
-+++ b/include/asm-avr32/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef __ASM_AVR32_SCATTERLIST_H
- #define __ASM_AVR32_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
-index 0a52242..b0828d4 100644
---- a/include/asm-avr32/setup.h
-+++ b/include/asm-avr32/setup.h
-@@ -110,7 +110,7 @@ struct tagtable {
- int (*parse)(struct tag *);
- };
-
--#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
-+#define __tag __attribute_used__ __attribute__((__section__(".taglist.init")))
- #define __tagtable(tag, fn) \
- static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-@@ -124,19 +124,12 @@ struct tagtable {
- #define for_each_tag(t,base) \
- for (t = base; t->hdr.size; t = tag_next(t))
-
--extern struct tag_mem_range *mem_phys;
--extern struct tag_mem_range *mem_reserved;
--extern struct tag_mem_range *mem_ramdisk;
--
- extern struct tag *bootloader_tags;
-
--extern void setup_bootmem(void);
--extern void setup_processor(void);
--extern void board_setup_fbmem(unsigned long fbmem_start,
-- unsigned long fbmem_size);
-+extern resource_size_t fbmem_start;
-+extern resource_size_t fbmem_size;
-
--/* Chip-specific hook to enable the use of SDRAM */
--void chip_enable_sdram(void);
-+void setup_processor(void);
-
- #endif /* !__ASSEMBLY__ */
-
-diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
-index f91975f..c02bc83 100644
---- a/include/asm-avr32/sysreg.h
-+++ b/include/asm-avr32/sysreg.h
-@@ -7,326 +7,281 @@
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--#ifndef __ASM_AVR32_SYSREG_H__
--#define __ASM_AVR32_SYSREG_H__
-+#ifndef __ASM_AVR32_SYSREG_H
-+#define __ASM_AVR32_SYSREG_H
-
- /* sysreg register offsets */
--#define SYSREG_SR 0x0000
--#define SYSREG_EVBA 0x0004
--#define SYSREG_ACBA 0x0008
--#define SYSREG_CPUCR 0x000c
--#define SYSREG_ECR 0x0010
--#define SYSREG_RSR_SUP 0x0014
--#define SYSREG_RSR_INT0 0x0018
--#define SYSREG_RSR_INT1 0x001c
--#define SYSREG_RSR_INT2 0x0020
--#define SYSREG_RSR_INT3 0x0024
--#define SYSREG_RSR_EX 0x0028
--#define SYSREG_RSR_NMI 0x002c
--#define SYSREG_RSR_DBG 0x0030
--#define SYSREG_RAR_SUP 0x0034
--#define SYSREG_RAR_INT0 0x0038
--#define SYSREG_RAR_INT1 0x003c
--#define SYSREG_RAR_INT2 0x0040
--#define SYSREG_RAR_INT3 0x0044
--#define SYSREG_RAR_EX 0x0048
--#define SYSREG_RAR_NMI 0x004c
--#define SYSREG_RAR_DBG 0x0050
--#define SYSREG_JECR 0x0054
--#define SYSREG_JOSP 0x0058
--#define SYSREG_JAVA_LV0 0x005c
--#define SYSREG_JAVA_LV1 0x0060
--#define SYSREG_JAVA_LV2 0x0064
--#define SYSREG_JAVA_LV3 0x0068
--#define SYSREG_JAVA_LV4 0x006c
--#define SYSREG_JAVA_LV5 0x0070
--#define SYSREG_JAVA_LV6 0x0074
--#define SYSREG_JAVA_LV7 0x0078
--#define SYSREG_JTBA 0x007c
--#define SYSREG_JBCR 0x0080
--#define SYSREG_CONFIG0 0x0100
--#define SYSREG_CONFIG1 0x0104
--#define SYSREG_COUNT 0x0108
--#define SYSREG_COMPARE 0x010c
--#define SYSREG_TLBEHI 0x0110
--#define SYSREG_TLBELO 0x0114
--#define SYSREG_PTBR 0x0118
--#define SYSREG_TLBEAR 0x011c
--#define SYSREG_MMUCR 0x0120
--#define SYSREG_TLBARLO 0x0124
--#define SYSREG_TLBARHI 0x0128
--#define SYSREG_PCCNT 0x012c
--#define SYSREG_PCNT0 0x0130
--#define SYSREG_PCNT1 0x0134
--#define SYSREG_PCCR 0x0138
--#define SYSREG_BEAR 0x013c
-+#define SYSREG_SR 0x0000
-+#define SYSREG_EVBA 0x0004
-+#define SYSREG_ACBA 0x0008
-+#define SYSREG_CPUCR 0x000c
-+#define SYSREG_ECR 0x0010
-+#define SYSREG_RSR_SUP 0x0014
-+#define SYSREG_RSR_INT0 0x0018
-+#define SYSREG_RSR_INT1 0x001c
-+#define SYSREG_RSR_INT2 0x0020
-+#define SYSREG_RSR_INT3 0x0024
-+#define SYSREG_RSR_EX 0x0028
-+#define SYSREG_RSR_NMI 0x002c
-+#define SYSREG_RSR_DBG 0x0030
-+#define SYSREG_RAR_SUP 0x0034
-+#define SYSREG_RAR_INT0 0x0038
-+#define SYSREG_RAR_INT1 0x003c
-+#define SYSREG_RAR_INT2 0x0040
-+#define SYSREG_RAR_INT3 0x0044
-+#define SYSREG_RAR_EX 0x0048
-+#define SYSREG_RAR_NMI 0x004c
-+#define SYSREG_RAR_DBG 0x0050
-+#define SYSREG_JECR 0x0054
-+#define SYSREG_JOSP 0x0058
-+#define SYSREG_JAVA_LV0 0x005c
-+#define SYSREG_JAVA_LV1 0x0060
-+#define SYSREG_JAVA_LV2 0x0064
-+#define SYSREG_JAVA_LV3 0x0068
-+#define SYSREG_JAVA_LV4 0x006c
-+#define SYSREG_JAVA_LV5 0x0070
-+#define SYSREG_JAVA_LV6 0x0074
-+#define SYSREG_JAVA_LV7 0x0078
-+#define SYSREG_JTBA 0x007c
-+#define SYSREG_JBCR 0x0080
-+#define SYSREG_CONFIG0 0x0100
-+#define SYSREG_CONFIG1 0x0104
-+#define SYSREG_COUNT 0x0108
-+#define SYSREG_COMPARE 0x010c
-+#define SYSREG_TLBEHI 0x0110
-+#define SYSREG_TLBELO 0x0114
-+#define SYSREG_PTBR 0x0118
-+#define SYSREG_TLBEAR 0x011c
-+#define SYSREG_MMUCR 0x0120
-+#define SYSREG_TLBARLO 0x0124
-+#define SYSREG_TLBARHI 0x0128
-+#define SYSREG_PCCNT 0x012c
-+#define SYSREG_PCNT0 0x0130
-+#define SYSREG_PCNT1 0x0134
-+#define SYSREG_PCCR 0x0138
-+#define SYSREG_BEAR 0x013c
-+#define SYSREG_SABAL 0x0300
-+#define SYSREG_SABAH 0x0304
-+#define SYSREG_SABD 0x0308
-
- /* Bitfields in SR */
--#define SYSREG_SR_C_OFFSET 0
--#define SYSREG_SR_C_SIZE 1
--#define SYSREG_Z_OFFSET 1
--#define SYSREG_Z_SIZE 1
--#define SYSREG_SR_N_OFFSET 2
--#define SYSREG_SR_N_SIZE 1
--#define SYSREG_SR_V_OFFSET 3
--#define SYSREG_SR_V_SIZE 1
--#define SYSREG_Q_OFFSET 4
--#define SYSREG_Q_SIZE 1
--#define SYSREG_GM_OFFSET 16
--#define SYSREG_GM_SIZE 1
--#define SYSREG_I0M_OFFSET 17
--#define SYSREG_I0M_SIZE 1
--#define SYSREG_I1M_OFFSET 18
--#define SYSREG_I1M_SIZE 1
--#define SYSREG_I2M_OFFSET 19
--#define SYSREG_I2M_SIZE 1
--#define SYSREG_I3M_OFFSET 20
--#define SYSREG_I3M_SIZE 1
--#define SYSREG_EM_OFFSET 21
--#define SYSREG_EM_SIZE 1
--#define SYSREG_M0_OFFSET 22
--#define SYSREG_M0_SIZE 1
--#define SYSREG_M1_OFFSET 23
--#define SYSREG_M1_SIZE 1
--#define SYSREG_M2_OFFSET 24
--#define SYSREG_M2_SIZE 1
--#define SYSREG_SR_D_OFFSET 26
--#define SYSREG_SR_D_SIZE 1
--#define SYSREG_DM_OFFSET 27
--#define SYSREG_DM_SIZE 1
--#define SYSREG_SR_J_OFFSET 28
--#define SYSREG_SR_J_SIZE 1
--#define SYSREG_R_OFFSET 29
--#define SYSREG_R_SIZE 1
--#define SYSREG_H_OFFSET 30
--#define SYSREG_H_SIZE 1
--
--/* Bitfields in EVBA */
--
--/* Bitfields in ACBA */
-+#define SYSREG_SR_C_OFFSET 0
-+#define SYSREG_SR_C_SIZE 1
-+#define SYSREG_Z_OFFSET 1
-+#define SYSREG_Z_SIZE 1
-+#define SYSREG_SR_N_OFFSET 2
-+#define SYSREG_SR_N_SIZE 1
-+#define SYSREG_SR_V_OFFSET 3
-+#define SYSREG_SR_V_SIZE 1
-+#define SYSREG_Q_OFFSET 4
-+#define SYSREG_Q_SIZE 1
-+#define SYSREG_L_OFFSET 5
-+#define SYSREG_L_SIZE 1
-+#define SYSREG_T_OFFSET 14
-+#define SYSREG_T_SIZE 1
-+#define SYSREG_SR_R_OFFSET 15
-+#define SYSREG_SR_R_SIZE 1
-+#define SYSREG_GM_OFFSET 16
-+#define SYSREG_GM_SIZE 1
-+#define SYSREG_I0M_OFFSET 17
-+#define SYSREG_I0M_SIZE 1
-+#define SYSREG_I1M_OFFSET 18
-+#define SYSREG_I1M_SIZE 1
-+#define SYSREG_I2M_OFFSET 19
-+#define SYSREG_I2M_SIZE 1
-+#define SYSREG_I3M_OFFSET 20
-+#define SYSREG_I3M_SIZE 1
-+#define SYSREG_EM_OFFSET 21
-+#define SYSREG_EM_SIZE 1
-+#define SYSREG_M0_OFFSET 22
-+#define SYSREG_M0_SIZE 1
-+#define SYSREG_M1_OFFSET 23
-+#define SYSREG_M1_SIZE 1
-+#define SYSREG_M2_OFFSET 24
-+#define SYSREG_M2_SIZE 1
-+#define SYSREG_SR_D_OFFSET 26
-+#define SYSREG_SR_D_SIZE 1
-+#define SYSREG_DM_OFFSET 27
-+#define SYSREG_DM_SIZE 1
-+#define SYSREG_SR_J_OFFSET 28
-+#define SYSREG_SR_J_SIZE 1
-+#define SYSREG_H_OFFSET 29
-+#define SYSREG_H_SIZE 1
-
- /* Bitfields in CPUCR */
--#define SYSREG_BI_OFFSET 0
--#define SYSREG_BI_SIZE 1
--#define SYSREG_BE_OFFSET 1
--#define SYSREG_BE_SIZE 1
--#define SYSREG_FE_OFFSET 2
--#define SYSREG_FE_SIZE 1
--#define SYSREG_RE_OFFSET 3
--#define SYSREG_RE_SIZE 1
--#define SYSREG_IBE_OFFSET 4
--#define SYSREG_IBE_SIZE 1
--#define SYSREG_IEE_OFFSET 5
--#define SYSREG_IEE_SIZE 1
--
--/* Bitfields in ECR */
--#define SYSREG_ECR_OFFSET 0
--#define SYSREG_ECR_SIZE 32
--
--/* Bitfields in RSR_SUP */
--
--/* Bitfields in RSR_INT0 */
--
--/* Bitfields in RSR_INT1 */
--
--/* Bitfields in RSR_INT2 */
--
--/* Bitfields in RSR_INT3 */
--
--/* Bitfields in RSR_EX */
--
--/* Bitfields in RSR_NMI */
--
--/* Bitfields in RSR_DBG */
--
--/* Bitfields in RAR_SUP */
--
--/* Bitfields in RAR_INT0 */
--
--/* Bitfields in RAR_INT1 */
--
--/* Bitfields in RAR_INT2 */
--
--/* Bitfields in RAR_INT3 */
--
--/* Bitfields in RAR_EX */
--
--/* Bitfields in RAR_NMI */
--
--/* Bitfields in RAR_DBG */
--
--/* Bitfields in JECR */
--
--/* Bitfields in JOSP */
--
--/* Bitfields in JAVA_LV0 */
--
--/* Bitfields in JAVA_LV1 */
--
--/* Bitfields in JAVA_LV2 */
--
--/* Bitfields in JAVA_LV3 */
--
--/* Bitfields in JAVA_LV4 */
--
--/* Bitfields in JAVA_LV5 */
--
--/* Bitfields in JAVA_LV6 */
--
--/* Bitfields in JAVA_LV7 */
--
--/* Bitfields in JTBA */
--
--/* Bitfields in JBCR */
-+#define SYSREG_BI_OFFSET 0
-+#define SYSREG_BI_SIZE 1
-+#define SYSREG_BE_OFFSET 1
-+#define SYSREG_BE_SIZE 1
-+#define SYSREG_FE_OFFSET 2
-+#define SYSREG_FE_SIZE 1
-+#define SYSREG_RE_OFFSET 3
-+#define SYSREG_RE_SIZE 1
-+#define SYSREG_IBE_OFFSET 4
-+#define SYSREG_IBE_SIZE 1
-+#define SYSREG_IEE_OFFSET 5
-+#define SYSREG_IEE_SIZE 1
-
- /* Bitfields in CONFIG0 */
--#define SYSREG_CONFIG0_D_OFFSET 1
--#define SYSREG_CONFIG0_D_SIZE 1
--#define SYSREG_CONFIG0_S_OFFSET 2
--#define SYSREG_CONFIG0_S_SIZE 1
--#define SYSREG_O_OFFSET 3
--#define SYSREG_O_SIZE 1
--#define SYSREG_P_OFFSET 4
--#define SYSREG_P_SIZE 1
--#define SYSREG_CONFIG0_J_OFFSET 5
--#define SYSREG_CONFIG0_J_SIZE 1
--#define SYSREG_F_OFFSET 6
--#define SYSREG_F_SIZE 1
--#define SYSREG_MMUT_OFFSET 7
--#define SYSREG_MMUT_SIZE 3
--#define SYSREG_AR_OFFSET 10
--#define SYSREG_AR_SIZE 3
--#define SYSREG_AT_OFFSET 13
--#define SYSREG_AT_SIZE 3
--#define SYSREG_PROCESSORREVISION_OFFSET 16
--#define SYSREG_PROCESSORREVISION_SIZE 8
--#define SYSREG_PROCESSORID_OFFSET 24
--#define SYSREG_PROCESSORID_SIZE 8
-+#define SYSREG_CONFIG0_R_OFFSET 0
-+#define SYSREG_CONFIG0_R_SIZE 1
-+#define SYSREG_CONFIG0_D_OFFSET 1
-+#define SYSREG_CONFIG0_D_SIZE 1
-+#define SYSREG_CONFIG0_S_OFFSET 2
-+#define SYSREG_CONFIG0_S_SIZE 1
-+#define SYSREG_CONFIG0_O_OFFSET 3
-+#define SYSREG_CONFIG0_O_SIZE 1
-+#define SYSREG_CONFIG0_P_OFFSET 4
-+#define SYSREG_CONFIG0_P_SIZE 1
-+#define SYSREG_CONFIG0_J_OFFSET 5
-+#define SYSREG_CONFIG0_J_SIZE 1
-+#define SYSREG_CONFIG0_F_OFFSET 6
-+#define SYSREG_CONFIG0_F_SIZE 1
-+#define SYSREG_MMUT_OFFSET 7
-+#define SYSREG_MMUT_SIZE 3
-+#define SYSREG_AR_OFFSET 10
-+#define SYSREG_AR_SIZE 3
-+#define SYSREG_AT_OFFSET 13
-+#define SYSREG_AT_SIZE 3
-+#define SYSREG_PROCESSORREVISION_OFFSET 16
-+#define SYSREG_PROCESSORREVISION_SIZE 8
-+#define SYSREG_PROCESSORID_OFFSET 24
-+#define SYSREG_PROCESSORID_SIZE 8
-
- /* Bitfields in CONFIG1 */
--#define SYSREG_DASS_OFFSET 0
--#define SYSREG_DASS_SIZE 3
--#define SYSREG_DLSZ_OFFSET 3
--#define SYSREG_DLSZ_SIZE 3
--#define SYSREG_DSET_OFFSET 6
--#define SYSREG_DSET_SIZE 4
--#define SYSREG_IASS_OFFSET 10
--#define SYSREG_IASS_SIZE 2
--#define SYSREG_ILSZ_OFFSET 13
--#define SYSREG_ILSZ_SIZE 3
--#define SYSREG_ISET_OFFSET 16
--#define SYSREG_ISET_SIZE 4
--#define SYSREG_DMMUSZ_OFFSET 20
--#define SYSREG_DMMUSZ_SIZE 6
--#define SYSREG_IMMUSZ_OFFSET 26
--#define SYSREG_IMMUSZ_SIZE 6
--
--/* Bitfields in COUNT */
--
--/* Bitfields in COMPARE */
-+#define SYSREG_DASS_OFFSET 0
-+#define SYSREG_DASS_SIZE 3
-+#define SYSREG_DLSZ_OFFSET 3
-+#define SYSREG_DLSZ_SIZE 3
-+#define SYSREG_DSET_OFFSET 6
-+#define SYSREG_DSET_SIZE 4
-+#define SYSREG_IASS_OFFSET 10
-+#define SYSREG_IASS_SIZE 3
-+#define SYSREG_ILSZ_OFFSET 13
-+#define SYSREG_ILSZ_SIZE 3
-+#define SYSREG_ISET_OFFSET 16
-+#define SYSREG_ISET_SIZE 4
-+#define SYSREG_DMMUSZ_OFFSET 20
-+#define SYSREG_DMMUSZ_SIZE 6
-+#define SYSREG_IMMUSZ_OFFSET 26
-+#define SYSREG_IMMUSZ_SIZE 6
-
- /* Bitfields in TLBEHI */
--#define SYSREG_ASID_OFFSET 0
--#define SYSREG_ASID_SIZE 8
--#define SYSREG_TLBEHI_I_OFFSET 8
--#define SYSREG_TLBEHI_I_SIZE 1
--#define SYSREG_TLBEHI_V_OFFSET 9
--#define SYSREG_TLBEHI_V_SIZE 1
--#define SYSREG_VPN_OFFSET 10
--#define SYSREG_VPN_SIZE 22
-+#define SYSREG_ASID_OFFSET 0
-+#define SYSREG_ASID_SIZE 8
-+#define SYSREG_TLBEHI_I_OFFSET 8
-+#define SYSREG_TLBEHI_I_SIZE 1
-+#define SYSREG_TLBEHI_V_OFFSET 9
-+#define SYSREG_TLBEHI_V_SIZE 1
-+#define SYSREG_VPN_OFFSET 10
-+#define SYSREG_VPN_SIZE 22
-
- /* Bitfields in TLBELO */
--#define SYSREG_W_OFFSET 0
--#define SYSREG_W_SIZE 1
--#define SYSREG_TLBELO_D_OFFSET 1
--#define SYSREG_TLBELO_D_SIZE 1
--#define SYSREG_SZ_OFFSET 2
--#define SYSREG_SZ_SIZE 2
--#define SYSREG_AP_OFFSET 4
--#define SYSREG_AP_SIZE 3
--#define SYSREG_B_OFFSET 7
--#define SYSREG_B_SIZE 1
--#define SYSREG_G_OFFSET 8
--#define SYSREG_G_SIZE 1
--#define SYSREG_TLBELO_C_OFFSET 9
--#define SYSREG_TLBELO_C_SIZE 1
--#define SYSREG_PFN_OFFSET 10
--#define SYSREG_PFN_SIZE 22
--
--/* Bitfields in PTBR */
--
--/* Bitfields in TLBEAR */
-+#define SYSREG_W_OFFSET 0
-+#define SYSREG_W_SIZE 1
-+#define SYSREG_TLBELO_D_OFFSET 1
-+#define SYSREG_TLBELO_D_SIZE 1
-+#define SYSREG_SZ_OFFSET 2
-+#define SYSREG_SZ_SIZE 2
-+#define SYSREG_AP_OFFSET 4
-+#define SYSREG_AP_SIZE 3
-+#define SYSREG_B_OFFSET 7
-+#define SYSREG_B_SIZE 1
-+#define SYSREG_G_OFFSET 8
-+#define SYSREG_G_SIZE 1
-+#define SYSREG_TLBELO_C_OFFSET 9
-+#define SYSREG_TLBELO_C_SIZE 1
-+#define SYSREG_PFN_OFFSET 10
-+#define SYSREG_PFN_SIZE 22
-
- /* Bitfields in MMUCR */
--#define SYSREG_E_OFFSET 0
--#define SYSREG_E_SIZE 1
--#define SYSREG_M_OFFSET 1
--#define SYSREG_M_SIZE 1
--#define SYSREG_MMUCR_I_OFFSET 2
--#define SYSREG_MMUCR_I_SIZE 1
--#define SYSREG_MMUCR_N_OFFSET 3
--#define SYSREG_MMUCR_N_SIZE 1
--#define SYSREG_MMUCR_S_OFFSET 4
--#define SYSREG_MMUCR_S_SIZE 1
--#define SYSREG_DLA_OFFSET 8
--#define SYSREG_DLA_SIZE 6
--#define SYSREG_DRP_OFFSET 14
--#define SYSREG_DRP_SIZE 6
--#define SYSREG_ILA_OFFSET 20
--#define SYSREG_ILA_SIZE 6
--#define SYSREG_IRP_OFFSET 26
--#define SYSREG_IRP_SIZE 6
--
--/* Bitfields in TLBARLO */
--
--/* Bitfields in TLBARHI */
--
--/* Bitfields in PCCNT */
--
--/* Bitfields in PCNT0 */
--
--/* Bitfields in PCNT1 */
-+#define SYSREG_E_OFFSET 0
-+#define SYSREG_E_SIZE 1
-+#define SYSREG_M_OFFSET 1
-+#define SYSREG_M_SIZE 1
-+#define SYSREG_MMUCR_I_OFFSET 2
-+#define SYSREG_MMUCR_I_SIZE 1
-+#define SYSREG_MMUCR_N_OFFSET 3
-+#define SYSREG_MMUCR_N_SIZE 1
-+#define SYSREG_MMUCR_S_OFFSET 4
-+#define SYSREG_MMUCR_S_SIZE 1
-+#define SYSREG_DLA_OFFSET 8
-+#define SYSREG_DLA_SIZE 6
-+#define SYSREG_DRP_OFFSET 14
-+#define SYSREG_DRP_SIZE 6
-+#define SYSREG_ILA_OFFSET 20
-+#define SYSREG_ILA_SIZE 6
-+#define SYSREG_IRP_OFFSET 26
-+#define SYSREG_IRP_SIZE 6
-
- /* Bitfields in PCCR */
--
--/* Bitfields in BEAR */
-+#define SYSREG_PCCR_R_OFFSET 1
-+#define SYSREG_PCCR_R_SIZE 1
-+#define SYSREG_PCCR_C_OFFSET 2
-+#define SYSREG_PCCR_C_SIZE 1
-+#define SYSREG_PCCR_S_OFFSET 3
-+#define SYSREG_PCCR_S_SIZE 1
-+#define SYSREG_IEC_OFFSET 4
-+#define SYSREG_IEC_SIZE 1
-+#define SYSREG_IE0_OFFSET 5
-+#define SYSREG_IE0_SIZE 1
-+#define SYSREG_IE1_OFFSET 6
-+#define SYSREG_IE1_SIZE 1
-+#define SYSREG_FC_OFFSET 8
-+#define SYSREG_FC_SIZE 1
-+#define SYSREG_F0_OFFSET 9
-+#define SYSREG_F0_SIZE 1
-+#define SYSREG_F1_OFFSET 10
-+#define SYSREG_F1_SIZE 1
-+#define SYSREG_CONF0_OFFSET 12
-+#define SYSREG_CONF0_SIZE 6
-+#define SYSREG_CONF1_OFFSET 18
-+#define SYSREG_CONF1_SIZE 6
-
- /* Constants for ECR */
--#define ECR_UNRECOVERABLE 0
--#define ECR_TLB_MULTIPLE 1
--#define ECR_BUS_ERROR_WRITE 2
--#define ECR_BUS_ERROR_READ 3
--#define ECR_NMI 4
--#define ECR_ADDR_ALIGN_X 5
--#define ECR_PROTECTION_X 6
--#define ECR_DEBUG 7
--#define ECR_ILLEGAL_OPCODE 8
--#define ECR_UNIMPL_INSTRUCTION 9
--#define ECR_PRIVILEGE_VIOLATION 10
--#define ECR_FPE 11
--#define ECR_COPROC_ABSENT 12
--#define ECR_ADDR_ALIGN_R 13
--#define ECR_ADDR_ALIGN_W 14
--#define ECR_PROTECTION_R 15
--#define ECR_PROTECTION_W 16
--#define ECR_DTLB_MODIFIED 17
--#define ECR_TLB_MISS_X 20
--#define ECR_TLB_MISS_R 24
--#define ECR_TLB_MISS_W 28
-+#define ECR_UNRECOVERABLE 0
-+#define ECR_TLB_MULTIPLE 1
-+#define ECR_BUS_ERROR_WRITE 2
-+#define ECR_BUS_ERROR_READ 3
-+#define ECR_NMI 4
-+#define ECR_ADDR_ALIGN_X 5
-+#define ECR_PROTECTION_X 6
-+#define ECR_DEBUG 7
-+#define ECR_ILLEGAL_OPCODE 8
-+#define ECR_UNIMPL_INSTRUCTION 9
-+#define ECR_PRIVILEGE_VIOLATION 10
-+#define ECR_FPE 11
-+#define ECR_COPROC_ABSENT 12
-+#define ECR_ADDR_ALIGN_R 13
-+#define ECR_ADDR_ALIGN_W 14
-+#define ECR_PROTECTION_R 15
-+#define ECR_PROTECTION_W 16
-+#define ECR_DTLB_MODIFIED 17
-+#define ECR_TLB_MISS_X 20
-+#define ECR_TLB_MISS_R 24
-+#define ECR_TLB_MISS_W 28
-
- /* Bit manipulation macros */
--#define SYSREG_BIT(name) (1 << SYSREG_##name##_OFFSET)
--#define SYSREG_BF(name,value) (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) << SYSREG_##name##_OFFSET)
--#define SYSREG_BFEXT(name,value) (((value) >> SYSREG_##name##_OFFSET) & ((1 << SYSREG_##name##_SIZE) - 1))
--#define SYSREG_BFINS(name,value,old) (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) << SYSREG_##name##_OFFSET)) | SYSREG_BF(name,value))
-+#define SYSREG_BIT(name) \
-+ (1 << SYSREG_##name##_OFFSET)
-+#define SYSREG_BF(name,value) \
-+ (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \
-+ << SYSREG_##name##_OFFSET)
-+#define SYSREG_BFEXT(name,value)\
-+ (((value) >> SYSREG_##name##_OFFSET) \
-+ & ((1 << SYSREG_##name##_SIZE) - 1))
-+#define SYSREG_BFINS(name,value,old) \
-+ (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \
-+ << SYSREG_##name##_OFFSET)) \
-+ | SYSREG_BF(name,value))
-
-+/* Register access macros */
- #ifdef __CHECKER__
- extern unsigned long __builtin_mfsr(unsigned long reg);
- extern void __builtin_mtsr(unsigned long reg, unsigned long value);
- #endif
-
--/* Register access macros */
--#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
--#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
-+#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
-+#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
-
--#endif /* __ASM_AVR32_SYSREG_H__ */
-+#endif /* __ASM_AVR32_SYSREG_H */
-diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
-index ac59605..a8236ba 100644
---- a/include/asm-avr32/system.h
-+++ b/include/asm-avr32/system.h
-@@ -9,6 +9,7 @@
- #define __ASM_AVR32_SYSTEM_H
-
- #include <linux/compiler.h>
-+#include <linux/linkage.h>
- #include <linux/types.h>
-
- #include <asm/ptrace.h>
-@@ -140,15 +141,9 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
- sizeof(*(ptr))))
-
- struct pt_regs;
--extern void __die(const char *, struct pt_regs *, unsigned long,
-- const char *, const char *, unsigned long);
--extern void __die_if_kernel(const char *, struct pt_regs *, unsigned long,
-- const char *, const char *, unsigned long);
--
--#define die(msg, regs, err) \
-- __die(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
--#define die_if_kernel(msg, regs, err) \
-- __die_if_kernel(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
-+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
-+void _exception(long signr, struct pt_regs *regs, int code,
-+ unsigned long addr);
-
- #define arch_align_stack(x) (x)
-
-diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
-index d1f5b35..a2e606d 100644
---- a/include/asm-avr32/thread_info.h
-+++ b/include/asm-avr32/thread_info.h
-@@ -83,6 +83,7 @@ static inline struct thread_info *current_thread_info(void)
- #define TIF_SINGLE_STEP 6 /* single step after next break */
- #define TIF_MEMDIE 7
- #define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal */
-+#define TIF_CPU_GOING_TO_SLEEP 9 /* CPU is entering sleep 0 mode */
- #define TIF_USERSPACE 31 /* true if FS sets userspace */
-
- #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-@@ -94,6 +95,7 @@ static inline struct thread_info *current_thread_info(void)
- #define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP)
- #define _TIF_MEMDIE (1 << TIF_MEMDIE)
- #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-+#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
-
- /* XXX: These two masks must never span more than 16 bits! */
- /* work to do on interrupt/exception return */
-diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h
-index 74a679e..ed09239 100644
---- a/include/asm-avr32/uaccess.h
-+++ b/include/asm-avr32/uaccess.h
-@@ -181,24 +181,23 @@ extern int __put_user_bad(void);
-
- #define __get_user_nocheck(x, ptr, size) \
- ({ \
-- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \
-+ unsigned long __gu_val = 0; \
- int __gu_err = 0; \
- \
- switch (size) { \
- case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break; \
- case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break; \
- case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break; \
-- case 8: __get_user_asm("d", __gu_val, ptr, __gu_err); break; \
- default: __gu_err = __get_user_bad(); break; \
- } \
- \
-- x = __gu_val; \
-+ x = (typeof(*(ptr)))__gu_val; \
- __gu_err; \
- })
-
- #define __get_user_check(x, ptr, size) \
- ({ \
-- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \
-+ unsigned long __gu_val = 0; \
- const typeof(*(ptr)) __user * __gu_addr = (ptr); \
- int __gu_err = 0; \
- \
-@@ -216,10 +215,6 @@ extern int __put_user_bad(void);
- __get_user_asm("w", __gu_val, __gu_addr, \
- __gu_err); \
- break; \
-- case 8: \
-- __get_user_asm("d", __gu_val, __gu_addr, \
-- __gu_err); \
-- break; \
- default: \
- __gu_err = __get_user_bad(); \
- break; \
-@@ -227,7 +222,7 @@ extern int __put_user_bad(void);
- } else { \
- __gu_err = -EFAULT; \
- } \
-- x = __gu_val; \
-+ x = (typeof(*(ptr)))__gu_val; \
- __gu_err; \
- })
-
-diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
-index 3042723..7913617 100644
---- a/include/asm-avr32/unaligned.h
-+++ b/include/asm-avr32/unaligned.h
-@@ -6,20 +6,31 @@
- * implementation. The AVR32 AP implementation can handle unaligned
- * words, but halfwords must be halfword-aligned, and doublewords must
- * be word-aligned.
-- *
-- * TODO: Make all this CPU-specific and optimize.
- */
-
--#include <linux/string.h>
-+#include <asm-generic/unaligned.h>
-
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
-+#ifdef CONFIG_CPU_AT32AP7000
-
-+/* REVISIT calling memmove() may be smaller for 64-bit values ... */
-+
-+#undef get_unaligned
- #define get_unaligned(ptr) \
-- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
-+ ___get_unaligned(ptr, sizeof((*ptr)))
-+#define ___get_unaligned(ptr, size) \
-+ ((size == 4) ? *(ptr) : __get_unaligned(ptr, size))
-+
-+#undef put_unaligned
-+#define put_unaligned(val, ptr) \
-+ ___put_unaligned((__u64)(val), ptr, sizeof((*ptr)))
-+#define ___put_unaligned(val, ptr, size) \
-+do { \
-+ if (size == 4) \
-+ *(ptr) = (val); \
-+ else \
-+ __put_unaligned(val, ptr, size); \
-+} while (0)
-
--#define put_unaligned(val, ptr) \
-- ({ __typeof__(*(ptr)) __tmp = (val); \
-- memmove((ptr), &__tmp, sizeof(*(ptr))); \
-- (void)0; })
-+#endif
-
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
-index 8a05aa1..2687c77 100644
---- a/include/asm-frv/pgtable.h
-+++ b/include/asm-frv/pgtable.h
-@@ -509,10 +509,6 @@ static inline int pte_file(pte_t pte)
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
- #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h
-index fb38fd3..8e827fa 100644
---- a/include/asm-frv/scatterlist.h
-+++ b/include/asm-frv/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _ASM_SCATTERLIST_H
- #define _ASM_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- /*
- * Drivers must set either ->address or (preferred) ->page and ->offset
- * to indicate where data must be transferred to/from.
-diff --git a/include/asm-h8300/pgtable.h b/include/asm-h8300/pgtable.h
-index 8b7c685..170ea02 100644
---- a/include/asm-h8300/pgtable.h
-+++ b/include/asm-h8300/pgtable.h
-@@ -55,10 +55,6 @@ extern int is_in_rom(unsigned long);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
-diff --git a/include/asm-h8300/scatterlist.h b/include/asm-h8300/scatterlist.h
-index 7627f0c..985fdf5 100644
---- a/include/asm-h8300/scatterlist.h
-+++ b/include/asm-h8300/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _H8300_SCATTERLIST_H
- #define _H8300_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
-index c3b58d4..994cf30 100644
---- a/include/asm-i386/pgtable.h
-+++ b/include/asm-i386/pgtable.h
-@@ -519,10 +519,6 @@ do { \
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #include <asm-generic/pgtable.h>
-
- #endif /* _I386_PGTABLE_H */
-diff --git a/include/asm-i386/scatterlist.h b/include/asm-i386/scatterlist.h
-index 55d6c95..d7e45a8 100644
---- a/include/asm-i386/scatterlist.h
-+++ b/include/asm-i386/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _I386_SCATTERLIST_H
- #define _I386_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
-index 5531827..670b706 100644
---- a/include/asm-ia64/pgtable.h
-+++ b/include/asm-ia64/pgtable.h
-@@ -485,10 +485,6 @@ extern void paging_init (void);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
-diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
-index 9dbea88..a452ea2 100644
---- a/include/asm-ia64/scatterlist.h
-+++ b/include/asm-ia64/scatterlist.h
-@@ -6,6 +6,8 @@
- * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h
-index 1c15ba7..8b2a2f1 100644
---- a/include/asm-m32r/pgtable.h
-+++ b/include/asm-m32r/pgtable.h
-@@ -381,10 +381,6 @@ static inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
- #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-diff --git a/include/asm-m32r/scatterlist.h b/include/asm-m32r/scatterlist.h
-index c2de96c..352415f 100644
---- a/include/asm-m32r/scatterlist.h
-+++ b/include/asm-m32r/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _ASM_M32R_SCATTERLIST_H
- #define _ASM_M32R_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- char * address; /* Location data is to be transferred to, NULL for
- * highmem page */
-diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h
-index f3aa053..555b87a 100644
---- a/include/asm-m68k/pgtable.h
-+++ b/include/asm-m68k/pgtable.h
-@@ -143,10 +143,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /* MMU-specific headers */
-
- #ifdef CONFIG_SUN3
-diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
-index 549ad23..9dfbbc2 100644
---- a/include/asm-m68knommu/pgtable.h
-+++ b/include/asm-m68knommu/pgtable.h
-@@ -59,10 +59,6 @@ extern int is_in_rom(unsigned long);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
-diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h
-index 2085d6f..4da79d3 100644
---- a/include/asm-m68knommu/scatterlist.h
-+++ b/include/asm-m68knommu/scatterlist.h
-@@ -2,6 +2,7 @@
- #define _M68KNOMMU_SCATTERLIST_H
-
- #include <linux/mm.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
-index 0d3295f..27d77d9 100644
---- a/include/asm-mips/pgtable.h
-+++ b/include/asm-mips/pgtable.h
-@@ -387,10 +387,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- remap_pfn_range(vma, vaddr, pfn, size, prot)
- #endif
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #include <asm-generic/pgtable.h>
-
- /*
-diff --git a/include/asm-mips/scatterlist.h b/include/asm-mips/scatterlist.h
-index 2263470..7af104c 100644
---- a/include/asm-mips/scatterlist.h
-+++ b/include/asm-mips/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef __ASM_SCATTERLIST_H
- #define __ASM_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page * page;
- unsigned int offset;
-diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
-index d7e1b10..beb2adb 100644
---- a/include/asm-parisc/pgtable.h
-+++ b/include/asm-parisc/pgtable.h
-@@ -528,10 +528,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-
- #define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /* We provide our own get_unmapped_area to provide cache coherency */
-
- #define HAVE_ARCH_UNMAPPED_AREA
-diff --git a/include/asm-parisc/scatterlist.h b/include/asm-parisc/scatterlist.h
-index 236c1d0..e7211c7 100644
---- a/include/asm-parisc/scatterlist.h
-+++ b/include/asm-parisc/scatterlist.h
-@@ -2,6 +2,7 @@
- #define _ASM_PARISC_SCATTERLIST_H
-
- #include <asm/page.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
-index b1fdbf4..bed452d 100644
---- a/include/asm-ppc/pgtable.h
-+++ b/include/asm-ppc/pgtable.h
-@@ -827,10 +827,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- remap_pfn_range(vma, vaddr, pfn, size, prot)
- #endif
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /*
- * No page table caches to initialise
- */
-diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
-index 184d7fc..5b523c7 100644
---- a/include/asm-sh/pgtable.h
-+++ b/include/asm-sh/pgtable.h
-@@ -568,10 +568,6 @@ typedef pte_t *pte_addr_t;
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- struct mm_struct;
-
- /*
-diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h
-index d19e7cd..b9ae53c 100644
---- a/include/asm-sh/scatterlist.h
-+++ b/include/asm-sh/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef __ASM_SH_SCATTERLIST_H
- #define __ASM_SH_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page * page; /* Location for highmem page, if any */
- unsigned int offset;/* for highmem, page offset */
-diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h
-index 6b97c4c..b875482 100644
---- a/include/asm-sh64/pgtable.h
-+++ b/include/asm-sh64/pgtable.h
-@@ -485,10 +485,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma,
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #endif /* !__ASSEMBLY__ */
-
- /*
-diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h
-index 5d8fa32..1c723f2 100644
---- a/include/asm-sh64/scatterlist.h
-+++ b/include/asm-sh64/scatterlist.h
-@@ -11,6 +11,8 @@
- #ifndef __ASM_SH64_SCATTERLIST_H
- #define __ASM_SH64_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page * page; /* Location for highmem page, if any */
- unsigned int offset;/* for highmem, page offset */
-diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
-index ec4f3c6..048fdb4 100644
---- a/include/asm-sparc64/scatterlist.h
-+++ b/include/asm-sparc64/scatterlist.h
-@@ -3,6 +3,7 @@
- #define _SPARC64_SCATTERLIST_H
-
- #include <asm/page.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
-index af1cba6..56f4029 100644
---- a/include/asm-v850/scatterlist.h
-+++ b/include/asm-v850/scatterlist.h
-@@ -14,6 +14,8 @@
- #ifndef __V850_SCATTERLIST_H__
- #define __V850_SCATTERLIST_H__
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned offset;
-diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
-index 730bd60..1eb1043 100644
---- a/include/asm-x86_64/pgtable.h
-+++ b/include/asm-x86_64/pgtable.h
-@@ -413,10 +413,6 @@ extern int kern_addr_valid(unsigned long addr);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define HAVE_ARCH_UNMAPPED_AREA
-
- #define pgtable_cache_init() do { } while (0)
-diff --git a/include/asm-x86_64/scatterlist.h b/include/asm-x86_64/scatterlist.h
-index 49d89f8..eaf7ada 100644
---- a/include/asm-x86_64/scatterlist.h
-+++ b/include/asm-x86_64/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _X8664_SCATTERLIST_H
- #define _X8664_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff --git a/include/asm-xtensa/scatterlist.h b/include/asm-xtensa/scatterlist.h
-index 38a2b9a..ca337a2 100644
---- a/include/asm-xtensa/scatterlist.h
-+++ b/include/asm-xtensa/scatterlist.h
-@@ -11,6 +11,8 @@
- #ifndef _XTENSA_SCATTERLIST_H
- #define _XTENSA_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff --git a/include/linux/fb.h b/include/linux/fb.h
-index be913ec..deb2365 100644
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
-@@ -833,7 +833,7 @@ struct fb_info {
- #define fb_writeq sbus_writeq
- #define fb_memset sbus_memset_io
-
--#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
-+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
-
- #define fb_readb __raw_readb
- #define fb_readw __raw_readw
-diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
-new file mode 100644
-index 0000000..7796683
---- /dev/null
-+++ b/include/linux/gpio_mouse.h
-@@ -0,0 +1,47 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GPIO_MOUSE_H
-+#define _GPIO_MOUSE_H
-+
-+#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
-+#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
-+
-+/**
-+ * struct gpio_mouse_platform_data
-+ * @scan_ms: integer in ms specifying the scan periode.
-+ * @polarity: Pin polarity, active high or low.
-+ * @up: GPIO line for up value.
-+ * @down: GPIO line for down value.
-+ * @left: GPIO line for left value.
-+ * @right: GPIO line for right value.
-+ * @bleft: GPIO line for left button.
-+ * @bright: GPIO line for right button.
-+ * @bmiddle: GPIO line for middle button.
-+ *
-+ * This struct must be added to the platform_device in the board code. It is
-+ * used by the gpio_mouse driver to setup GPIO lines, calculate mouse movement
-+ * and have a reference to the timer used for scanning.
-+ */
-+struct gpio_mouse_platform_data {
-+ int scan_ms;
-+ int polarity;
-+
-+ int up;
-+ int down;
-+ int left;
-+ int right;
-+
-+ int bleft;
-+ int bmiddle;
-+ int bright;
-+};
-+
-+#endif /* _GPIO_MOUSE_H */
-diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h
-new file mode 100644
-index 0000000..c1bcb1f
---- /dev/null
-+++ b/include/linux/i2c-gpio.h
-@@ -0,0 +1,38 @@
-+/*
-+ * i2c-gpio interface to platform code
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef _LINUX_I2C_GPIO_H
-+#define _LINUX_I2C_GPIO_H
-+
-+/**
-+ * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
-+ * @sda_pin: GPIO pin ID to use for SDA
-+ * @scl_pin: GPIO pin ID to use for SCL
-+ * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
-+ * @timeout: clock stretching timeout in jiffies. If the slave keeps
-+ * SCL low for longer than this, the transfer will time out.
-+ * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
-+ * isn't actively driven high when setting the output value high.
-+ * gpio_get_value() must return the actual pin state even if the
-+ * pin is configured as an output.
-+ * @scl_is_open_drain: SCL is set up as open drain. Same requirements
-+ * as for sda_is_open_drain apply.
-+ * @scl_is_output_only: SCL output drivers cannot be turned off.
-+ */
-+struct i2c_gpio_platform_data {
-+ unsigned int sda_pin;
-+ unsigned int scl_pin;
-+ int udelay;
-+ int timeout;
-+ unsigned int sda_is_open_drain:1;
-+ unsigned int scl_is_open_drain:1;
-+ unsigned int scl_is_output_only:1;
-+};
-+
-+#endif /* _LINUX_I2C_GPIO_H */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..44ebe7d
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,26 @@
-+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
-+
-+struct at73c213_board_info {
-+
-+ /* This identifies a clock suitable for clk_get(NULL, dac_clk).
-+ * One might expect something like clk_get(&spidev->dev, "dac") to
-+ * work, but current clock framework implementations don't support
-+ * association of such clocks with non-core (e.g. SPI) devices.
-+ */
-+ char dac_clk[8];
-+
-+ /* SPI is used only for the control interface. Data is streamed
-+ * using "I2S" formats through a different interface, with its own
-+ * driver and associated resources (registers, irq, clock).
-+ */
-+ int i2s_dev;
-+
-+ /* this name is seen by userspace tools */
-+ char shortname[32];
-+
-+ /* REVISIT should target bitrate be provided here?
-+ * It can not be provided here, as it has to be calculated when probed
-+ */
-+};
-diff --git a/include/linux/ssc.h b/include/linux/ssc.h
-new file mode 100644
-index 0000000..9705e4a
---- /dev/null
-+++ b/include/linux/ssc.h
-@@ -0,0 +1,355 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
-+
-+#include <linux/platform_device.h>
-+#include <asm/irq.h>
-+
-+#define ATMEL_SSC_MODE_I2S_MASTER 0x00000001
-+#define ATMEL_SSC_MODE_I2S_SLAVE 0x00000002
-+#define ATMEL_SSC_MODE_SPI_MASTER 0x00000003
-+
-+#define ATMEL_SSC_SPI_MODE0 0 /* SPI: CPOL = 0, CPHA = 1 */
-+#define ATMEL_SSC_SPI_MODE1 1 /* SPI: CPOL = 0, CHPA = 0 */
-+#define ATMEL_SSC_SPI_MODE2 2 /* SPI: CPOL = 1, CPHA = 1 */
-+#define ATMEL_SSC_SPI_MODE3 3 /* SPI: CPOL = 1, CPHA = 0 */
-+
-+struct ssc_device {
-+ void __iomem *regs;
-+ struct platform_device *pdev;
-+ struct clk *clk;
-+ char name[6];
-+ int user;
-+ int irq;
-+};
-+
-+struct ssc_mode {
-+ unsigned int mode;
-+ unsigned int bauddiv;
-+ unsigned int data_length;
-+ unsigned int ssc_rxtx;
-+ unsigned int spi_mode;
-+ unsigned int spi_cs_pio_pin;
-+};
-+
-+struct ssc_xfer_info {
-+ unsigned long data;
-+ unsigned long len;
-+ unsigned long next_data;
-+ unsigned long next_len;
-+};
-+
-+struct ssc_device* __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode);
-+
-+int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+
-+int ssc_enable(struct ssc_device *ssc, char tx, char rx);
-+int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx);
-+int ssc_disable(struct ssc_device *ssc, char tx, char rx);
-+int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx);
-+
-+int ssc_enable_int(struct ssc_device *ssc, unsigned int mask);
-+int ssc_disable_int(struct ssc_device *ssc, unsigned int mask);
-+int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask);
-+
-+int ssc_clk_get_rate(struct ssc_device *ssc);
-+
-+int ssc_to_irq(struct ssc_device *ssc);
-+struct ssc_device* irq_to_ssc(unsigned int irq);
-+
-+void at32_init_ssc(struct platform_device *pdev);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR 0x00000000
-+#define SSC_CR_RXDIS_SIZE 1
-+#define SSC_CR_RXDIS_OFFSET 1
-+#define SSC_CR_RXEN_SIZE 1
-+#define SSC_CR_RXEN_OFFSET 0
-+#define SSC_CR_SWRST_SIZE 1
-+#define SSC_CR_SWRST_OFFSET 15
-+#define SSC_CR_TXDIS_SIZE 1
-+#define SSC_CR_TXDIS_OFFSET 9
-+#define SSC_CR_TXEN_SIZE 1
-+#define SSC_CR_TXEN_OFFSET 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR 0x00000004
-+#define SSC_CMR_DIV_SIZE 12
-+#define SSC_CMR_DIV_OFFSET 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR 0x00000010
-+#define SSC_RCMR_CKG_SIZE 2
-+#define SSC_RCMR_CKG_OFFSET 6
-+#define SSC_RCMR_CKI_SIZE 1
-+#define SSC_RCMR_CKI_OFFSET 5
-+#define SSC_RCMR_CKO_SIZE 3
-+#define SSC_RCMR_CKO_OFFSET 2
-+#define SSC_RCMR_CKS_SIZE 2
-+#define SSC_RCMR_CKS_OFFSET 0
-+#define SSC_RCMR_PERIOD_SIZE 8
-+#define SSC_RCMR_PERIOD_OFFSET 24
-+#define SSC_RCMR_START_SIZE 4
-+#define SSC_RCMR_START_OFFSET 8
-+#define SSC_RCMR_STOP_SIZE 1
-+#define SSC_RCMR_STOP_OFFSET 12
-+#define SSC_RCMR_STTDLY_SIZE 8
-+#define SSC_RCMR_STTDLY_OFFSET 16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR 0x00000014
-+#define SSC_RFMR_DATLEN_SIZE 5
-+#define SSC_RFMR_DATLEN_OFFSET 0
-+#define SSC_RFMR_DATNB_SIZE 4
-+#define SSC_RFMR_DATNB_OFFSET 8
-+#define SSC_RFMR_FSEDGE_SIZE 1
-+#define SSC_RFMR_FSEDGE_OFFSET 24
-+#define SSC_RFMR_FSLEN_SIZE 4
-+#define SSC_RFMR_FSLEN_OFFSET 16
-+#define SSC_RFMR_FSOS_SIZE 4
-+#define SSC_RFMR_FSOS_OFFSET 20
-+#define SSC_RFMR_LOOP_SIZE 1
-+#define SSC_RFMR_LOOP_OFFSET 5
-+#define SSC_RFMR_MSBF_SIZE 1
-+#define SSC_RFMR_MSBF_OFFSET 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR 0x00000018
-+#define SSC_TCMR_CKG_SIZE 2
-+#define SSC_TCMR_CKG_OFFSET 6
-+#define SSC_TCMR_CKI_SIZE 1
-+#define SSC_TCMR_CKI_OFFSET 5
-+#define SSC_TCMR_CKO_SIZE 3
-+#define SSC_TCMR_CKO_OFFSET 2
-+#define SSC_TCMR_CKS_SIZE 2
-+#define SSC_TCMR_CKS_OFFSET 0
-+#define SSC_TCMR_PERIOD_SIZE 8
-+#define SSC_TCMR_PERIOD_OFFSET 24
-+#define SSC_TCMR_START_SIZE 4
-+#define SSC_TCMR_START_OFFSET 8
-+#define SSC_TCMR_STTDLY_SIZE 8
-+#define SSC_TCMR_STTDLY_OFFSET 16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR 0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE 1
-+#define SSC_TFMR_DATDEF_OFFSET 5
-+#define SSC_TFMR_DATLEN_SIZE 5
-+#define SSC_TFMR_DATLEN_OFFSET 0
-+#define SSC_TFMR_DATNB_SIZE 4
-+#define SSC_TFMR_DATNB_OFFSET 8
-+#define SSC_TFMR_FSDEN_SIZE 1
-+#define SSC_TFMR_FSDEN_OFFSET 23
-+#define SSC_TFMR_FSEDGE_SIZE 1
-+#define SSC_TFMR_FSEDGE_OFFSET 24
-+#define SSC_TFMR_FSLEN_SIZE 4
-+#define SSC_TFMR_FSLEN_OFFSET 16
-+#define SSC_TFMR_FSOS_SIZE 3
-+#define SSC_TFMR_FSOS_OFFSET 20
-+#define SSC_TFMR_MSBF_SIZE 1
-+#define SSC_TFMR_MSBF_OFFSET 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR 0x00000020
-+#define SSC_RHR_RDAT_SIZE 32
-+#define SSC_RHR_RDAT_OFFSET 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR 0x00000024
-+#define SSC_THR_TDAT_SIZE 32
-+#define SSC_THR_TDAT_OFFSET 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR 0x00000030
-+#define SSC_RSHR_RSDAT_SIZE 16
-+#define SSC_RSHR_RSDAT_OFFSET 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR 0x00000034
-+#define SSC_TSHR_TSDAT_SIZE 16
-+#define SSC_TSHR_RSDAT_OFFSET 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R 0x00000038
-+#define SSC_RC0R_CP0_SIZE 16
-+#define SSC_RC0R_CP0_OFFSET 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R 0x0000003c
-+#define SSC_RC1R_CP1_SIZE 16
-+#define SSC_RC1R_CP1_OFFSET 0
-+
-+/* SSC Status Register */
-+#define SSC_SR 0x00000040
-+#define SSC_SR_CP0_SIZE 1
-+#define SSC_SR_CP0_OFFSET 8
-+#define SSC_SR_CP1_SIZE 1
-+#define SSC_SR_CP1_OFFSET 9
-+#define SSC_SR_ENDRX_SIZE 1
-+#define SSC_SR_ENDRX_OFFSET 6
-+#define SSC_SR_ENDTX_SIZE 1
-+#define SSC_SR_ENDTX_OFFSET 2
-+#define SSC_SR_OVRUN_SIZE 1
-+#define SSC_SR_OVRUN_OFFSET 5
-+#define SSC_SR_RXBUFF_SIZE 1
-+#define SSC_SR_RXBUFF_OFFSET 7
-+#define SSC_SR_RXEN_SIZE 1
-+#define SSC_SR_RXEN_OFFSET 17
-+#define SSC_SR_RXRDY_SIZE 1
-+#define SSC_SR_RXRDY_OFFSET 4
-+#define SSC_SR_RXSYN_SIZE 1
-+#define SSC_SR_RXSYN_OFFSET 11
-+#define SSC_SR_TXBUFE_SIZE 1
-+#define SSC_SR_TXBUFE_OFFSET 3
-+#define SSC_SR_TXEMPTY_SIZE 1
-+#define SSC_SR_TXEMPTY_OFFSET 1
-+#define SSC_SR_TXEN_SIZE 1
-+#define SSC_SR_TXEN_OFFSET 16
-+#define SSC_SR_TXRDY_SIZE 1
-+#define SSC_SR_TXRDY_OFFSET 0
-+#define SSC_SR_TXSYN_SIZE 1
-+#define SSC_SR_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER 0x00000044
-+#define SSC_IER_CP0_SIZE 1
-+#define SSC_IER_CP0_OFFSET 8
-+#define SSC_IER_CP1_SIZE 1
-+#define SSC_IER_CP1_OFFSET 9
-+#define SSC_IER_ENDRX_SIZE 1
-+#define SSC_IER_ENDRX_OFFSET 6
-+#define SSC_IER_ENDTX_SIZE 1
-+#define SSC_IER_ENDTX_OFFSET 2
-+#define SSC_IER_OVRUN_SIZE 1
-+#define SSC_IER_OVRUN_OFFSET 5
-+#define SSC_IER_RXBUFF_SIZE 1
-+#define SSC_IER_RXBUFF_OFFSET 7
-+#define SSC_IER_RXRDY_SIZE 1
-+#define SSC_IER_RXRDY_OFFSET 4
-+#define SSC_IER_RXSYN_SIZE 1
-+#define SSC_IER_RXSYN_OFFSET 11
-+#define SSC_IER_TXBUFE_SIZE 1
-+#define SSC_IER_TXBUFE_OFFSET 3
-+#define SSC_IER_TXEMPTY_SIZE 1
-+#define SSC_IER_TXEMPTY_OFFSET 1
-+#define SSC_IER_TXRDY_SIZE 1
-+#define SSC_IER_TXRDY_OFFSET 0
-+#define SSC_IER_TXSYN_SIZE 1
-+#define SSC_IER_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR 0x00000048
-+#define SSC_IDR_CP0_SIZE 1
-+#define SSC_IDR_CP0_OFFSET 8
-+#define SSC_IDR_CP1_SIZE 1
-+#define SSC_IDR_CP1_OFFSET 9
-+#define SSC_IDR_ENDRX_SIZE 1
-+#define SSC_IDR_ENDRX_OFFSET 6
-+#define SSC_IDR_ENDTX_SIZE 1
-+#define SSC_IDR_ENDTX_OFFSET 2
-+#define SSC_IDR_OVRUN_SIZE 1
-+#define SSC_IDR_OVRUN_OFFSET 5
-+#define SSC_IDR_RXBUFF_SIZE 1
-+#define SSC_IDR_RXBUFF_OFFSET 7
-+#define SSC_IDR_RXRDY_SIZE 1
-+#define SSC_IDR_RXRDY_OFFSET 4
-+#define SSC_IDR_RXSYN_SIZE 1
-+#define SSC_IDR_RXSYN_OFFSET 11
-+#define SSC_IDR_TXBUFE_SIZE 1
-+#define SSC_IDR_TXBUFE_OFFSET 3
-+#define SSC_IDR_TXEMPTY_SIZE 1
-+#define SSC_IDR_TXEMPTY_OFFSET 1
-+#define SSC_IDR_TXRDY_SIZE 1
-+#define SSC_IDR_TXRDY_OFFSET 0
-+#define SSC_IDR_TXSYN_SIZE 1
-+#define SSC_IDR_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR 0x0000004c
-+#define SSC_IMR_CP0_SIZE 1
-+#define SSC_IMR_CP0_OFFSET 8
-+#define SSC_IMR_CP1_SIZE 1
-+#define SSC_IMR_CP1_OFFSET 9
-+#define SSC_IMR_ENDRX_SIZE 1
-+#define SSC_IMR_ENDRX_OFFSET 6
-+#define SSC_IMR_ENDTX_SIZE 1
-+#define SSC_IMR_ENDTX_OFFSET 2
-+#define SSC_IMR_OVRUN_SIZE 1
-+#define SSC_IMR_OVRUN_OFFSET 5
-+#define SSC_IMR_RXBUFF_SIZE 1
-+#define SSC_IMR_RXBUFF_OFFSET 7
-+#define SSC_IMR_RXRDY_SIZE 1
-+#define SSC_IMR_RXRDY_OFFSET 4
-+#define SSC_IMR_RXSYN_SIZE 1
-+#define SSC_IMR_RXSYN_OFFSET 11
-+#define SSC_IMR_TXBUFE_SIZE 1
-+#define SSC_IMR_TXBUFE_OFFSET 3
-+#define SSC_IMR_TXEMPTY_SIZE 1
-+#define SSC_IMR_TXEMPTY_OFFSET 1
-+#define SSC_IMR_TXRDY_SIZE 1
-+#define SSC_IMR_TXRDY_OFFSET 0
-+#define SSC_IMR_TXSYN_SIZE 1
-+#define SSC_IMR_TXSYN_OFFSET 10
-+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR 0x00000100
-+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR 0x00000104
-+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR 0x00000108
-+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR 0x00000110
-+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR 0x00000114
-+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR 0x0000010c
-+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR 0x00000118
-+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR 0x0000011c
-+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR 0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET 8
-+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR 0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET 8
-+
-+/* Bit manipulation macros */
-+#define SSC_BIT(name) (1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name,value) (((value) & ((1 << SSC_##name##_SIZE) - 1)) << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name,value) (((value) >> SSC_##name##_OFFSET) & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name,value,old) (((old) & ~(((1 << SSC_##name##_SIZE) - 1) << SSC_##name##_OFFSET)) | SSC_BF(name,value))
-+
-+/* Register access macros */
-+#define ssc_readl(port,reg) \
-+ __raw_readl((port)->regs + SSC_##reg)
-+#define ssc_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + SSC_##reg)
-+
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
-index c1d1629..5f38803 100644
---- a/include/pcmcia/cs_types.h
-+++ b/include/pcmcia/cs_types.h
-@@ -21,7 +21,7 @@
- #include <sys/types.h>
- #endif
-
--#if defined(__arm__) || defined(__mips__)
-+#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
- /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
- typedef u_int ioaddr_t;
- #else
-diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
-new file mode 100644
-index 0000000..4eea637
---- /dev/null
-+++ b/include/video/atmel_lcdc.h
-@@ -0,0 +1,196 @@
-+/*
-+ * Header file for AT91/AT32 LCD Controller
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_LCDC_H__
-+#define __ATMEL_LCDC_H__
-+
-+ /* LCD Controller info data structure */
-+struct atmel_lcdfb_info {
-+ spinlock_t lock;
-+ struct fb_info *info;
-+ void __iomem *mmio;
-+ unsigned long irq_base;
-+
-+ unsigned int guard_time;
-+ struct platform_device *pdev;
-+ struct clk *bus_clk;
-+ struct clk *lcdc_clk;
-+ unsigned int default_bpp;
-+ unsigned int default_lcdcon2;
-+ unsigned int default_dmacon;
-+ void (*atmel_lcdfb_power_control)(int on);
-+ struct fb_monspecs *default_monspecs;
-+ u32 pseudo_palette[16];
-+};
-+
-+#define ATMEL_LCDC_DMABADDR1 0x00
-+#define ATMEL_LCDC_DMABADDR2 0x04
-+#define ATMEL_LCDC_DMAFRMPT1 0x08
-+#define ATMEL_LCDC_DMAFRMPT2 0x0c
-+#define ATMEL_LCDC_DMAFRMADD1 0x10
-+#define ATMEL_LCDC_DMAFRMADD2 0x14
-+
-+#define ATMEL_LCDC_DMAFRMCFG 0x18
-+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
-+#define ATMEL_LCDC_BLENGTH_OFFSET 24
-+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
-+
-+#define ATMEL_LCDC_DMACON 0x1c
-+#define ATMEL_LCDC_DMAEN (0x1 << 0)
-+#define ATMEL_LCDC_DMARST (0x1 << 1)
-+#define ATMEL_LCDC_DMABUSY (0x1 << 2)
-+#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
-+#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
-+
-+#define ATMEL_LCDC_DMA2DCFG 0x20
-+#define ATMEL_LCDC_ADDRINC_OFFSET 0
-+#define ATMEL_LCDC_ADDRINC (0xffff)
-+#define ATMEL_LCDC_PIXELOFF_OFFSET 24
-+#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
-+
-+#define ATMEL_LCDC_LCDCON1 0x0800
-+#define ATMEL_LCDC_BYPASS (1 << 0)
-+#define ATMEL_LCDC_CLKVAL_OFFSET 12
-+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
-+#define ATMEL_LCDC_LINCNT (0x7ff << 21)
-+
-+#define ATMEL_LCDC_LCDCON2 0x0804
-+#define ATMEL_LCDC_DISTYPE (3 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
-+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
-+#define ATMEL_LCDC_SCANMOD (1 << 2)
-+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
-+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
-+#define ATMEL_LCDC_IFWIDTH (3 << 3)
-+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
-+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
-+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
-+#define ATMEL_LCDC_PIXELSIZE (7 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
-+#define ATMEL_LCDC_INVVD (1 << 8)
-+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
-+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
-+#define ATMEL_LCDC_INVFRAME (1 << 9 )
-+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
-+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
-+#define ATMEL_LCDC_INVLINE (1 << 10)
-+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
-+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
-+#define ATMEL_LCDC_INVCLK (1 << 11)
-+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
-+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
-+#define ATMEL_LCDC_INVDVAL (1 << 12)
-+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
-+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
-+#define ATMEL_LCDC_CLKMOD (1 << 15)
-+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-+#define ATMEL_LCDC_MEMOR (1 << 31)
-+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
-+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
-+
-+#define ATMEL_LCDC_TIM1 0x0808
-+#define ATMEL_LCDC_VFP (0xff << 0)
-+#define ATMEL_LCDC_VBP_OFFSET 8
-+#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
-+#define ATMEL_LCDC_VPW_OFFSET 16
-+#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define ATMEL_LCDC_VHDLY_OFFSET 24
-+#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
-+
-+#define ATMEL_LCDC_TIM2 0x080c
-+#define ATMEL_LCDC_HBP (0xff << 0)
-+#define ATMEL_LCDC_HPW_OFFSET 8
-+#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
-+#define ATMEL_LCDC_HFP_OFFSET 21
-+#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+
-+#define ATMEL_LCDC_LCDFRMCFG 0x0810
-+#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
-+#define ATMEL_LCDC_HOZVAL_OFFSET 21
-+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
-+
-+#define ATMEL_LCDC_FIFO 0x0814
-+#define ATMEL_LCDC_FIFOTH (0xffff)
-+
-+#define ATMEL_LCDC_MVAL 0x0818
-+
-+#define ATMEL_LCDC_DP1_2 0x081c
-+#define ATMEL_LCDC_DP4_7 0x0820
-+#define ATMEL_LCDC_DP3_5 0x0824
-+#define ATMEL_LCDC_DP2_3 0x0828
-+#define ATMEL_LCDC_DP5_7 0x082c
-+#define ATMEL_LCDC_DP3_4 0x0830
-+#define ATMEL_LCDC_DP4_5 0x0834
-+#define ATMEL_LCDC_DP6_7 0x0838
-+#define ATMEL_LCDC_DP1_2_VAL (0xff)
-+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
-+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
-+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
-+
-+#define ATMEL_LCDC_PWRCON 0x083c
-+#define ATMEL_LCDC_PWR (1 << 0)
-+#define ATMEL_LCDC_GUARDT_OFFSET 1
-+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
-+#define ATMEL_LCDC_BUSY (1 << 31)
-+
-+#define ATMEL_LCDC_CONTRAST_CTR 0x0840
-+#define ATMEL_LCDC_PS (3 << 0)
-+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
-+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
-+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
-+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
-+#define ATMEL_LCDC_POL (1 << 2)
-+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
-+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
-+#define ATMEL_LCDC_ENA (1 << 3)
-+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
-+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
-+
-+#define ATMEL_LCDC_CONTRAST_VAL 0x0844
-+#define ATMEL_LCDC_CVAL (0xff)
-+
-+#define ATMEL_LCDC_IER 0x0848
-+#define ATMEL_LCDC_IDR 0x084c
-+#define ATMEL_LCDC_IMR 0x0850
-+#define ATMEL_LCDC_ISR 0x0854
-+#define ATMEL_LCDC_ICR 0x0858
-+#define ATMEL_LCDC_LNI (1 << 0)
-+#define ATMEL_LCDC_LSTLNI (1 << 1)
-+#define ATMEL_LCDC_EOFI (1 << 2)
-+#define ATMEL_LCDC_UFLWI (1 << 4)
-+#define ATMEL_LCDC_OWRI (1 << 5)
-+#define ATMEL_LCDC_MERI (1 << 6)
-+
-+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
-+
-+#endif /* __ATMEL_LCDC_H__ */
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- # sh64 port by Paul Mundt
- # Random bits by Matt Mackall <mpm@selenic.com>
- # M68k port by Geert Uytterhoeven and Andreas Schwab
-+# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- # Usage:
- # objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- if ($arch eq 'arm') {
- #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
- $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+ } elsif ($arch eq 'avr32') {
-+ #8000008a: 20 1d sub sp,4
-+ #80000ca8: fa cd 05 b0 sub sp,sp,1456
-+ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- } elsif ($arch =~ /^i[3456]86$/) {
- #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
- $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
-diff --git a/sound/Kconfig b/sound/Kconfig
-index 97532bb..2bad674 100644
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -62,9 +62,13 @@ source "sound/aoa/Kconfig"
-
- source "sound/arm/Kconfig"
-
-+source "sound/spi/Kconfig"
-+
-+source "sound/avr32/Kconfig"
-+
- source "sound/mips/Kconfig"
-
--# the following will depend on the order of config.
-+# tee following will depend on the order of config.
- # here assuming USB is defined before ALSA
- source "sound/usb/Kconfig"
-
-diff --git a/sound/Makefile b/sound/Makefile
-index b7c7fb7..fda6893 100644
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ synth/ usb/ \
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
-diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
-new file mode 100644
-index 0000000..adfe779
---- /dev/null
-+++ b/sound/avr32/Kconfig
-@@ -0,0 +1,12 @@
-+menu "AVR32 devices"
-+ depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+ tristate "Atmel AC97 Controller Driver"
-+ depends on SND
-+ select SND_PCM
-+ select SND_AC97_CODEC
-+ help
-+ ALSA sound driver for the Atmel AC97 controller.
-+
-+endmenu
-diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
-new file mode 100644
-index 0000000..fd864b7
---- /dev/null
-+++ b/sound/avr32/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for ALSA
-+#
-+
-+snd-atmel-ac97-objs := ac97c.o
-+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
-diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
-new file mode 100644
-index 0000000..32f6639
---- /dev/null
-+++ b/sound/avr32/ac97c.c
-@@ -0,0 +1,880 @@
-+/*
-+ * Driver for the Atmel AC97 Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/memalloc.h>
-+
-+#include <asm/io.h>
-+#include <asm/dma-controller.h>
-+
-+#include "ac97c.h"
-+
-+/*
-+ * Module parameters
-+ */
-+static char *id;
-+module_param(id, charp, 0444);
-+MODULE_PARM_DESC(id, "ID string for Atmel AC97 controller");
-+
-+static DEFINE_MUTEX(opened_mutex);
-+
-+struct atmel_ac97_dma_info {
-+ struct dma_request_cyclic req_tx;
-+ struct dma_request_cyclic req_rx;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+
-+typedef struct atmel_ac97 {
-+ spinlock_t lock;
-+ void __iomem *regs;
-+ struct snd_pcm_substream *playback_substream;
-+ struct snd_pcm_substream *capture_substream;
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_ac97 *ac97;
-+ struct snd_ac97_bus *ac97_bus;
-+ int opened;
-+ int period;
-+ u64 cur_format;
-+ unsigned int cur_rate;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+ struct atmel_ac97_dma_info dma;
-+} atmel_ac97_t;
-+#define get_chip(card) ((atmel_ac97_t *)(card)->private_data)
-+
-+#define ac97c_writel(chip, reg, val) \
-+ __raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg) \
-+ __raw_readl((chip)->regs + AC97C_##reg)
-+
-+/*
-+ * PCM part
-+ */
-+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ |SNDRV_PCM_INFO_MMAP
-+ |SNDRV_PCM_INFO_MMAP_VALID
-+ |SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ |SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 6,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ |SNDRV_PCM_INFO_MMAP
-+ |SNDRV_PCM_INFO_MMAP_VALID
-+ |SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ |SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+/* Joint full duplex variables */
-+unsigned int hw_rates[1];
-+unsigned int hw_formats[1];
-+struct snd_pcm_hw_constraint_list hw_constraint_rates;
-+struct snd_pcm_hw_constraint_list hw_constraint_formats;
-+
-+/*
-+ * PCM functions
-+ */
-+static int
-+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_playback_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL<<chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->playback_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_capture_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL<<chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->capture_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ int err;
-+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ int err;
-+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
-+{
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
-+{
-+
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_TO_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, OCA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format){
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~AC97C_CMR_CEM_LITTLE;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
-+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_tx.buffer_size = buffer_size;
-+ chip->dma.req_tx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_tx.buffer_size !=
-+ (chip->dma.req_tx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.dev_id = chip;
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_FROM_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, ICA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~(AC97C_CMR_CEM_LITTLE);
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~(AC97C_MR_VRA);
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
-+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_rx.buffer_size = buffer_size;
-+ chip->dma.req_rx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_rx.buffer_size !=
-+ (chip->dma.req_rx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.dev_id = chip;
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+ &chip->dma.req_tx);
-+ dma_start_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+static int snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+ &chip->dma.req_rx);
-+ dma_start_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ mutex_lock(&opened_mutex);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ mutex_unlock(&opened_mutex);
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) -
-+ runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+
-+ return pos;
-+}
-+
-+static struct snd_pcm_ops atmel_ac97_playback_ops = {
-+ .open = snd_atmel_ac97_playback_open,
-+ .close = snd_atmel_ac97_playback_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_playback_hw_params,
-+ .hw_free = snd_atmel_ac97_playback_hw_free,
-+ .prepare = snd_atmel_ac97_playback_prepare,
-+ .trigger = snd_atmel_ac97_playback_trigger,
-+ .pointer = snd_atmel_ac97_playback_pointer,
-+};
-+
-+static struct snd_pcm_ops atmel_ac97_capture_ops = {
-+ .open = snd_atmel_ac97_capture_open,
-+ .close = snd_atmel_ac97_capture_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_capture_hw_params,
-+ .hw_free = snd_atmel_ac97_capture_hw_free,
-+ .prepare = snd_atmel_ac97_capture_prepare,
-+ .trigger = snd_atmel_ac97_capture_trigger,
-+ .pointer = snd_atmel_ac97_capture_pointer,
-+};
-+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+ /* Playback */
-+ {
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)
-+ | (1 << AC97_SLOT_PCM_CENTER)
-+ | (1 << AC97_SLOT_PCM_SLEFT)
-+ | (1 << AC97_SLOT_PCM_SRIGHT)
-+ | (1 << AC97_SLOT_LFE)),
-+ } }
-+ },
-+ /* PCM in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)),
-+ } }
-+ },
-+ /* Mic in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = (1<<AC97_SLOT_MIC),
-+ } }
-+ },
-+};
-+
-+static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip)
-+{
-+ struct snd_pcm *pcm;
-+ int err;
-+
-+ err = snd_ac97_pcm_assign(chip->ac97_bus,
-+ ARRAY_SIZE(atmel_ac97_pcm_defs),
-+ atmel_ac97_pcm_defs);
-+ if (err)
-+ return err;
-+
-+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+ if (err)
-+ return err;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+ &atmel_ac97_playback_ops);
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+ &atmel_ac97_capture_ops);
-+
-+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+ &chip->pdev->dev,
-+ 128 * 1024, 128 * 1024);
-+
-+ pcm->private_data = chip;
-+ pcm->info_flags = 0;
-+ strcpy(pcm->name, "Atmel-AC97");
-+ chip->pcm = pcm;
-+
-+ return 0;
-+}
-+
-+/* Mixer part */
-+static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip)
-+{
-+ int err;
-+ struct snd_ac97_template template;
-+
-+ memset(&template, 0, sizeof(template));
-+ template.private_data = chip;
-+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
-+
-+ return err;
-+}
-+
-+static void atmel_ac97_error(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+
-+ printk(KERN_WARNING
-+ "DMA Controller error, channel %d (AC97C)\n",
-+ req->req.channel);
-+}
-+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ atmel_ac97_t *chip = req->dev_id;
-+ if (req->periph_id == chip->dma.tx_periph_id)
-+ snd_pcm_period_elapsed(chip->playback_substream);
-+ else
-+ snd_pcm_period_elapsed(chip->capture_substream);
-+}
-+
-+/*
-+ * Codec part
-+ */
-+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-+ unsigned short val)
-+{
-+ atmel_ac97_t *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+
-+ word = (reg & 0x7f) << 16 | val;
-+
-+ do {
-+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+ ac97c_writel(chip, COTHR, word);
-+ return;
-+ }
-+ udelay(1);
-+ } while (--timeout);
-+
-+ snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n");
-+}
-+
-+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
-+ unsigned short reg)
-+{
-+ atmel_ac97_t *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+ int write = 10;
-+
-+ word = (0x80 | (reg & 0x7f)) << 16;
-+
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+ ac97c_readl(chip, CORHR);
-+
-+retry_write:
-+ timeout = 40;
-+
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+ ac97c_writel(chip, COTHR, word);
-+ goto read_reg;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+read_reg:
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){
-+ unsigned short val = ac97c_readl(chip, CORHR);
-+ return val;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+timed_out:
-+ snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n");
-+ return 0xffff;
-+}
-+
-+static void snd_atmel_ac97_reset(atmel_ac97_t *chip)
-+{
-+ /* TODO: Perform hard reset of codec as well */
-+ ac97c_writel(chip, MR, AC97C_MR_WRST);
-+ mdelay(1);
-+ ac97c_writel(chip, MR, AC97C_MR_ENA);
-+}
-+
-+static void snd_atmel_ac97_destroy(struct snd_card *card)
-+{
-+ atmel_ac97_t *chip = get_chip(card);
-+
-+ if (chip->regs)
-+ iounmap(chip->regs);
-+
-+ if (chip->mck) {
-+ clk_disable(chip->mck);
-+ clk_put(chip->mck);
-+ }
-+
-+ if (chip->dma.req_tx.req.dmac){
-+ dma_release_channel(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ }
-+ if (chip->dma.req_rx.req.dmac) {
-+ dma_release_channel(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ }
-+}
-+
-+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
-+ struct platform_device *pdev)
-+{
-+ static struct snd_ac97_bus_ops ops = {
-+ .write = snd_atmel_ac97_write,
-+ .read = snd_atmel_ac97_read,
-+ };
-+ atmel_ac97_t *chip = get_chip(card);
-+ struct resource *regs;
-+ struct clk *mck;
-+ int err;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ clk_enable(mck);
-+ chip->mck = mck;
-+
-+ card->private_free = snd_atmel_ac97_destroy;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->pdev = pdev;
-+
-+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!chip->regs)
-+ return -ENOMEM;
-+
-+ snd_card_set_dev(card, &pdev->dev);
-+
-+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
-+
-+ return err;
-+}
-+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
-+{
-+ static int dev;
-+ struct snd_card *card;
-+ atmel_ac97_t *chip;
-+ int err;
-+ int ch;
-+
-+ mutex_init(&opened_mutex);
-+
-+ err = -ENOMEM;
-+ card = snd_card_new(-1, id, THIS_MODULE, sizeof(atmel_ac97_t));
-+ if (!card)
-+ goto out;
-+ chip = get_chip(card);
-+
-+ err = snd_atmel_ac97_create(card, pdev);
-+ if (err)
-+ goto out_free_card;
-+
-+ snd_atmel_ac97_reset(chip);
-+
-+ err = snd_atmel_ac97_mixer_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ err = snd_atmel_ac97_pcm_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ /* TODO: Get this information from the platform device */
-+ chip->dma.req_tx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_tx.req.dmac) {
-+ printk(KERN_ERR
-+ "atmel-ac97c: No DMA controller for TX, aborting\n");
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_rx.req.dmac) {
-+ snd_printk(KERN_ERR
-+ "atmel-ac97c: No DMA controller available for RX, aborting\n");
-+ goto out_free_card;
-+ }
-+
-+ chip->dma.rx_periph_id = 3;
-+ chip->dma.tx_periph_id = 4;
-+
-+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+ if (ch < 0) {
-+ printk(KERN_ERR
-+ "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n");
-+ goto out_free_card;
-+ }
-+ chip->dma.req_tx.req.channel = ch;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_tx.req.error = atmel_ac97_error;
-+
-+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+ if (ch < 0) {
-+ snd_printk(KERN_ERR
-+ "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n");
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.channel = ch;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_rx.req.error = atmel_ac97_error;
-+
-+ strcpy(card->driver, "ac97c");
-+ strcpy(card->shortname, "Atmel-AC97");
-+ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i",
-+ chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id);
-+
-+ err = snd_card_register(card);
-+ if (err)
-+ goto out_free_card;
-+
-+ platform_set_drvdata(pdev, card);
-+ dev++;
-+ return 0;
-+
-+out_free_card:
-+ snd_card_free(card);
-+out:
-+ return err;
-+}
-+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+
-+ snd_card_free(card);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_ac97_driver = {
-+ .remove = __devexit_p(snd_atmel_ac97_remove),
-+ .driver = {
-+ .name = "atmel_ac97c",
-+ },
-+};
-+
-+static int __init atmel_ac97_init(void)
-+{
-+ return platform_driver_probe(&atmel_ac97_driver, snd_atmel_ac97_probe);
-+}
-+
-+static void __exit atmel_ac97_exit(void)
-+{
-+ platform_driver_unregister(&atmel_ac97_driver);
-+}
-+
-+module_init(atmel_ac97_init);
-+module_exit(atmel_ac97_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
-new file mode 100644
-index 0000000..96246e7
---- /dev/null
-+++ b/sound/avr32/ac97c.h
-@@ -0,0 +1,71 @@
-+/*
-+ * Register definitions for the Atmel AC97 Controller.
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR 0x08
-+#define AC97C_ICA 0x10
-+#define AC97C_OCA 0x14
-+#define AC97C_CARHR 0x20
-+#define AC97C_CATHR 0x24
-+#define AC97C_CASR 0x28
-+#define AC97C_CAMR 0x2c
-+#define AC97C_CBRHR 0x30
-+#define AC97C_CBTHR 0x34
-+#define AC97C_CBSR 0x38
-+#define AC97C_CBMR 0x3c
-+#define AC97C_CORHR 0x40
-+#define AC97C_COTHR 0x44
-+#define AC97C_COSR 0x48
-+#define AC97C_COMR 0x4c
-+#define AC97C_SR 0x50
-+#define AC97C_IER 0x54
-+#define AC97C_IDR 0x58
-+#define AC97C_IMR 0x5c
-+#define AC97C_VERSION 0xfc
-+
-+#define AC97C_CATPR PDC_TPR
-+#define AC97C_CATCR PDC_TCR
-+#define AC97C_CATNPR PDC_TNPR
-+#define AC97C_CATNCR PDC_TNCR
-+#define AC97C_CARPR PDC_RPR
-+#define AC97C_CARCR PDC_RCR
-+#define AC97C_CARNPR PDC_RNPR
-+#define AC97C_CARNCR PDC_RNCR
-+#define AC97C_PTCR PDC_PTCR
-+
-+#define AC97C_MR_ENA (1 << 0)
-+#define AC97C_MR_WRST (1 << 1)
-+#define AC97C_MR_VRA (1 << 2)
-+
-+#define AC97C_CSR_TXRDY (1 << 0)
-+#define AC97C_CSR_UNRUN (1 << 2)
-+#define AC97C_CSR_RXRDY (1 << 4)
-+#define AC97C_CSR_ENDTX (1 << 10)
-+#define AC97C_CSR_ENDRX (1 << 14)
-+
-+#define AC97C_CMR_SIZE_20 (0 << 16)
-+#define AC97C_CMR_SIZE_18 (1 << 16)
-+#define AC97C_CMR_SIZE_16 (2 << 16)
-+#define AC97C_CMR_SIZE_10 (3 << 16)
-+#define AC97C_CMR_CEM_LITTLE (1 << 18)
-+#define AC97C_CMR_CEM_BIG (0 << 18)
-+#define AC97C_CMR_CENA (1 << 21)
-+#define AC97C_CMR_PDCEN (1 << 22)
-+
-+#define AC97C_SR_CAEVT (1 << 3)
-+
-+#define AC97C_CH_ASSIGN(slot, channel) \
-+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE 0x0
-+#define AC97C_CHANNEL_A 0x1
-+#define AC97C_CHANNEL_B 0x2
-+
-+#endif /* __SOUND_AVR32_AC97C_H */
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..6814353
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
-+
-+menu "SPI devices"
-+ depends on SND != n
-+
-+config SND_AT73C213
-+ tristate "Atmel AT73C213 DAC driver"
-+ depends on ATMEL_SSC
-+ select SND_PCM
-+ help
-+ Say Y here if you want to use the Atmel AT73C213 DAC. This device can
-+ be found on several development boards for AT91 and AVR32.
-+
-+ This driver requires the Atmel SSC driver for sound sink, a
-+ peripheral found on most AT91 and AVR32 microprocessors.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called snd-at73c213.
-+
-+config SND_AT73C213_TARGET_BITRATE
-+ int "Target bitrate for AT73C213"
-+ depends on SND_AT73C213
-+ default "48000"
-+ range 8000 50000
-+ help
-+ Sets the target bitrate for the bitrate calculator in the driver.
-+ Limited by hardware to be between 8000 Hz and 50000 Hz.
-+
-+ Set to 48000 Hz by default.
-+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
-+
-+snd-at73c213-objs := at73c213.o
-+
-+obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f94e417
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1123 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kmod.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/initval.h>
-+#include <sound/driver.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+
-+#include <linux/ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include <asm/io.h>
-+#include <asm/processor.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN 8000 /* hardware limit? */
-+#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX 50000 /* hardware limit */
-+
-+/* initial (hardware reset) AT73C213 register values */
-+static unsigned char snd_at73c213_original_image[18] =
-+{
-+ 0x00, /* 00 - CTRL */
-+ 0x05, /* 01 - LLIG */
-+ 0x05, /* 02 - RLIG */
-+ 0x08, /* 03 - LPMG */
-+ 0x08, /* 04 - RPMG */
-+ 0x00, /* 05 - LLOG */
-+ 0x00, /* 06 - RLOG */
-+ 0x22, /* 07 - OLC */
-+ 0x09, /* 08 - MC */
-+ 0x00, /* 09 - CSFC */
-+ 0x00, /* 0A - MISC */
-+ 0x00, /* 0B - */
-+ 0x00, /* 0C - PRECH */
-+ 0x05, /* 0D - AUXG */
-+ 0x00, /* 0E - */
-+ 0x00, /* 0F - */
-+ 0x00, /* 10 - RST */
-+ 0x00, /* 11 - PA_CTRL */
-+};
-+
-+/* SSC setup */
-+static struct ssc_mode ssc_at73c213 =
-+{
-+ .mode = ATMEL_SSC_MODE_I2S_MASTER,
-+ .data_length = 16,
-+};
-+
-+/* chip-specific data */
-+struct snd_at73c213 {
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_pcm_substream *substream;
-+ int irq;
-+ int period;
-+ unsigned long bitrate;
-+ struct clk *bitclk;
-+ struct clk *dac_clk;
-+ struct ssc_device *ssc;
-+ struct spi_device *spi;
-+ struct at73c213_board_info *info;
-+ struct ssc_xfer_info ssc_xfer;
-+ u8 spi_wbuffer[2];
-+ u8 spi_rbuffer[2];
-+ /* image of the SPI registers in AT73C213 */
-+ u8 image[18];
-+ spinlock_t lock;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer msg_xfer = {
-+ .len = 2,
-+ .cs_change = 0,
-+ };
-+
-+ spi_message_init(&msg);
-+
-+ chip->spi_wbuffer[0] = reg;
-+ chip->spi_wbuffer[1] = val;
-+
-+ msg_xfer.tx_buf = chip->spi_wbuffer;
-+ msg_xfer.rx_buf = chip->spi_rbuffer;
-+ spi_message_add_tail(&msg_xfer, &msg);
-+
-+ return spi_sync(chip->spi, &msg);
-+}
-+
-+#define write_reg(_spi, reg, val) \
-+ do { \
-+ retval = snd_at73c213_write_reg(_spi, reg, val); \
-+ if (retval) \
-+ goto out; \
-+ } while (0)
-+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+ .info = SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .rate_min = 8000, /* overwritten by chip->bitrate */
-+ .rate_max = 50000, /* overwritten by chip->bitrate */
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64 * 1024 - 1,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 64 * 1024 - 1,
-+ .periods_min = 4,
-+ .periods_max = 1024,
-+};
-+
-+/*
-+ * calculate and set bitrate and divisions
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
-+{
-+ unsigned long ssc_rate = ssc_clk_get_rate(chip->ssc);
-+ unsigned long dac_rate_new, ssc_div, status;
-+ unsigned long ssc_div_max, ssc_div_min;
-+ int max_tries, retval;
-+
-+ /* We connect two clocks here, picking divisors so the I2S clocks
-+ * out data at the same rate the DAC clocks it in ... and as close
-+ * as practical to the desired target rate.
-+ *
-+ * The DAC master clock (MCLK) is programmable, and is either 256
-+ * or (not here) 384 times the I2S output clock (BCLK).
-+ */
-+
-+ /* SSC clock / (bitrate * stereo * 16-bit) */
-+ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+ max_tries = (ssc_div_max - ssc_div_min) / 2;
-+
-+ if ((ssc_div % 2) != 0)
-+ ssc_div++;
-+ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+ ssc_div -= 2;
-+ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX) {
-+ return -ENXIO;
-+ }
-+ }
-+
-+ /* search for a possible bitrate */
-+ do {
-+ /* SSC clock / (ssc divider * 16-bit * stereo) */
-+ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+ return -ENXIO;
-+
-+ dac_rate_new = 8 * (ssc_rate / ssc_div); /* 256 / (2 * 16) = 8 */
-+
-+ status = clk_round_rate(chip->dac_clk, dac_rate_new);
-+ if (status < 0)
-+ return status;
-+
-+ /* ignore difference smaller than 256 Hz */
-+ if ((status/256) == (dac_rate_new/256))
-+ goto set_rate;
-+
-+ ssc_div += 2;
-+ } while (--max_tries);
-+
-+ /* not able to find a bitrate */
-+ return -ENXIO;
-+
-+set_rate:
-+ status = clk_set_rate(chip->dac_clk, status);
-+ if (status < 0)
-+ return status;
-+
-+ ssc_at73c213.bauddiv = ssc_div;
-+ retval = ssc_set_mode(chip->ssc, &ssc_at73c213);
-+ if (retval)
-+ return retval;
-+
-+ /* SSC clock / (ssc divider * 16-bit * stereo) */
-+ chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
-+
-+ printk(KERN_INFO "at73c213: supported bitrate is %lu (%lu divider)\n",
-+ chip->bitrate, ssc_div);
-+
-+ return 0;
-+}
-+
-+/* open callback */
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+ snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+ runtime->hw = snd_at73c213_playback_hw;
-+ chip->substream = substream;
-+
-+ return 0;
-+}
-+
-+/* close callback */
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ chip->substream = NULL;
-+ return 0;
-+}
-+
-+/* hw_params callback */
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ return snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+}
-+
-+/* hw_free callback */
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+/* prepare callback */
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size;
-+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+ chip->period = 0;
-+
-+ /* Make sure that our data are actually readable by the SSC */
-+ dma_sync_single_for_device(&chip->spi->dev,
-+ (long)runtime->dma_area,
-+ block_size, DMA_TO_DEVICE);
-+ dma_sync_single_for_device(&chip->spi->dev,
-+ (long)runtime->dma_area + block_size,
-+ block_size, DMA_TO_DEVICE);
-+
-+ chip->ssc_xfer.data = (long)runtime->dma_area;
-+ chip->ssc_xfer.data &= ~0xe0000000;
-+ chip->ssc_xfer.len = runtime->period_size * 2;
-+ chip->ssc_xfer.next_data = (long)runtime->dma_area + block_size;
-+ chip->ssc_xfer.next_data &= ~0xe0000000;
-+ chip->ssc_xfer.next_len = runtime->period_size * 2;
-+ ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer);
-+
-+ return 0;
-+}
-+
-+/* trigger callback */
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+ int cmd)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ int retval = 0;
-+ unsigned long flags = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ ssc_enable_int(chip->ssc, SSC_BIT(IER_ENDTX));
-+ ssc_enable_xfer(chip->ssc, 1, 0);
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ ssc_disable_xfer(chip->ssc, 1, 0);
-+ ssc_disable_int(chip->ssc, SSC_BIT(IDR_ENDTX));
-+ break;
-+ default:
-+ printk(KERN_WARNING "at73c213: spurious command %x\n", cmd);
-+ retval = -EINVAL;
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return retval;
-+}
-+
-+/* pointer callback */
-+static snd_pcm_uframes_t snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ ssc_get_tx_buffers(chip->ssc, &chip->ssc_xfer);
-+ bytes = chip->ssc_xfer.data - (unsigned long)runtime->dma_area;
-+
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+/* operators */
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+ .open = snd_at73c213_pcm_open,
-+ .close = snd_at73c213_pcm_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_at73c213_pcm_hw_params,
-+ .hw_free = snd_at73c213_pcm_hw_free,
-+ .prepare = snd_at73c213_pcm_prepare,
-+ .trigger = snd_at73c213_pcm_trigger,
-+ .pointer = snd_at73c213_pcm_pointer,
-+};
-+
-+/* free a pcm device */
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+ if (chip->pcm) {
-+ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+ chip->pcm = NULL;
-+ }
-+}
-+
-+/* create a new pcm device */
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
-+{
-+ struct snd_pcm *pcm;
-+ int retval;
-+
-+ retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm);
-+ if (retval < 0)
-+ return retval;
-+
-+ pcm->private_data = chip;
-+ pcm->private_free = snd_at73c213_pcm_free;
-+ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+ strcpy(pcm->name, "at73c213");
-+ chip->pcm = pcm;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+ /* TODO: why can I not use SNDRV_DMA_TYPE_DEV? */
-+ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+ SNDRV_DMA_TYPE_CONTINUOUS,
-+ snd_dma_continuous_data(GFP_KERNEL),
-+ 64 * 1024, 64 * 1024);
-+ return 0;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+ struct snd_at73c213 *chip = dev_id;
-+ struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+ u32 status;
-+ int offset, next_period, block_size, mask, retval;
-+
-+ spin_lock(&chip->lock);
-+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+ retval = ssc_get_int_mask(chip->ssc, &status);
-+ if (retval)
-+ return retval;
-+
-+ if (status & SSC_BIT(IMR_ENDTX)) {
-+ chip->period++;
-+ if (chip->period == runtime->periods)
-+ chip->period = 0;
-+ next_period = chip->period + 1;
-+ if (next_period == runtime->periods)
-+ next_period = 0;
-+
-+ offset = block_size * next_period;
-+
-+ /* make sure that our data are actually readable by the SSC */
-+ dma_sync_single_for_device(&chip->spi->dev,
-+ (long)runtime->dma_area + offset,
-+ block_size, DMA_TO_DEVICE);
-+ chip->ssc_xfer.data = 0; /* only update next pointer */
-+ chip->ssc_xfer.next_data = (long)runtime->dma_area + offset;
-+ chip->ssc_xfer.next_data &= ~0xe0000000;
-+ chip->ssc_xfer.next_len = runtime->period_size * 2;
-+ ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer);
-+ } else {
-+ printk(KERN_WARNING
-+ "Spurious SSC interrupt, status = 0x%08lx\n",
-+ (unsigned long)status);
-+ ssc_disable_int(chip->ssc, status);
-+ }
-+
-+ ssc_get_int_mask(chip->ssc, &mask);
-+ spin_unlock(&chip->lock);
-+
-+ if (status & SSC_BIT(IMR_ENDTX))
-+ snd_pcm_period_elapsed(chip->substream);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Mixer functions
-+ */
-+#if 0 /* Function not in use */
-+static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ unsigned long mask = (kcontrol->private_value >> 16) & 0xff;
-+
-+ uinfo->type = (mask == 1) ?
-+ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
-+}
-+#endif
-+
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ val = (ucontrol->value.integer.value[0] & mask);
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ val = (chip->image[reg] & ~(mask << shift)) | val;
-+ change = val != chip->image[reg];
-+ write_reg(chip, reg, val);
-+
-+ chip->image[reg] = val;
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ int mask = (kcontrol->private_value >> 24) & 0xFF;
-+
-+ uinfo->type = mask == 1 ?
-+ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ ucontrol->value.integer.value[0] =
-+ (chip->image[left_reg] >> shift_left) & mask;
-+ ucontrol->value.integer.value[1] =
-+ (chip->image[right_reg] >> shift_right) & mask;
-+
-+ if (invert) {
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+ ucontrol->value.integer.value[1] =
-+ (mask - ucontrol->value.integer.value[1]);
-+ }
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+ int change, retval;
-+ unsigned short val1, val2;
-+
-+ val1 = ucontrol->value.integer.value[0] & mask;
-+ val2 = ucontrol->value.integer.value[1] & mask;
-+ if (invert) {
-+ val1 = mask - val1;
-+ val2 = mask - val2;
-+ }
-+ val1 <<= shift_left;
-+ val2 <<= shift_right;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1;
-+ val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2;
-+ change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg];
-+ write_reg(chip, left_reg, val1);
-+ write_reg(chip, right_reg, val2);
-+
-+ chip->image[left_reg] = val1;
-+ chip->image[right_reg] = val2;
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 1;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (0x01 - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ if (ucontrol->value.integer.value[0])
-+ val = mask;
-+ else
-+ val = 0;
-+
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ val |= (chip->image[reg] & ~(mask << shift));
-+ change = val != chip->image[reg];
-+
-+ write_reg(chip, reg, val);
-+
-+ chip->image[reg] = val;
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_aux_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
-+
-+ return 0;
-+}
-+
-+#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+ .info = snd_at73c213_mono_info, \
-+ .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \
-+ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+ .info = snd_at73c213_mono_switch_info, \
-+ .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \
-+ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+ .info = snd_at73c213_stereo_info, \
-+ .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \
-+ .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "PA Playback Volume",
-+ .index = 0,
-+ .info = snd_at73c213_pa_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Aux Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_aux_capture_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Line Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_line_capture_volume_info,
-+ .get = snd_at73c213_stereo_get,
-+ .put = snd_at73c213_stereo_put,
-+ .private_value = DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+ struct snd_card *card;
-+ int errval, idx;
-+
-+ if (chip == NULL || chip->pcm == NULL)
-+ return -EINVAL;
-+
-+ card = chip->card;
-+
-+ strcpy(card->mixername, chip->pcm->name);
-+
-+ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+ if ((errval = snd_ctl_add(card,
-+ snd_ctl_new1(&snd_at73c213_controls[idx],
-+ chip))) < 0) {
-+ goto cleanup;
-+ }
-+ }
-+
-+ return 0;
-+
-+cleanup:
-+ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+ struct snd_kcontrol *kctl;
-+ kctl = snd_ctl_find_numid(card, idx);
-+ if (kctl)
-+ snd_ctl_remove(card, kctl);
-+ }
-+ return errval;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+ int retval;
-+ unsigned char dac_ctrl = 0;
-+
-+ retval = snd_at73c213_set_bitrate(chip);
-+ if (retval)
-+ goto out;
-+
-+ /* enable DAC master clock */
-+ clk_enable(chip->dac_clk);
-+
-+ /* initialize at73c213 on SPI bus */
-+ write_reg(chip, DAC_RST, 0x04);
-+ msleep(1);
-+ write_reg(chip, DAC_RST, 0x03);
-+
-+ /* precharge everything */
-+ write_reg(chip, DAC_PRECH, 0xFF);
-+ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+ write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR));
-+
-+ msleep(50);
-+
-+ /* stop precharging PA */
-+ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
-+ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
-+
-+ msleep(450);
-+
-+ /* stop precharging DAC, turn on master power */
-+ write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+ chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR);
-+
-+ msleep(1);
-+
-+ /* turn on DAC */
-+ dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)|
-+ (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR);
-+
-+ write_reg(chip, DAC_CTRL, dac_ctrl);
-+ chip->image[DAC_CTRL] = dac_ctrl;
-+
-+ /* mute sound */
-+ write_reg(chip, DAC_LMPG, 0x3F);
-+ chip->image[DAC_LMPG] = 0x3F;
-+ write_reg(chip, DAC_RMPG, 0x3F);
-+ chip->image[DAC_RMPG] = 0x3F;
-+ write_reg(chip, DAC_LLOG, 0x3F);
-+ chip->image[DAC_LLOG] = 0x3F;
-+ write_reg(chip, DAC_RLOG, 0x3F);
-+ chip->image[DAC_RLOG] = 0x3F;
-+ write_reg(chip, DAC_LLIG, 0x11);
-+ chip->image[DAC_LLIG] = 0x11;
-+ write_reg(chip, DAC_RLIG, 0x11);
-+ chip->image[DAC_RLIG] = 0x11;
-+ write_reg(chip, DAC_AUXG, 0x11);
-+ chip->image[DAC_AUXG] = 0x11;
-+
-+ /* enable I2S clock */
-+ retval = ssc_enable(chip->ssc, 1, 0);
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_dev_free(struct snd_device *device)
-+{
-+ struct snd_at73c213 *chip = device->device_data;
-+
-+ ssc_disable(chip->ssc, 1, 0);
-+ if (chip->irq >= 0) {
-+ free_irq(chip->irq, chip);
-+ chip->irq = -1;
-+ }
-+ ssc_free(chip->ssc);
-+
-+ return 0;
-+}
-+
-+static int __devinit snd_at73c213_init(struct snd_card *card,
-+ struct spi_device *spi)
-+{
-+ static struct snd_device_ops ops = {
-+ .dev_free = snd_at73c213_dev_free,
-+ };
-+ struct snd_at73c213 *chip = get_chip(card);
-+ int irq, retval;
-+
-+ irq = ssc_to_irq(chip->ssc);
-+ if (irq < 0)
-+ return irq;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->irq = -1;
-+
-+ retval = -ENOMEM;
-+
-+ retval = spi_setup(chip->spi);
-+ if (retval)
-+ goto cleanup;
-+
-+ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+ if (retval) {
-+ snd_printk("unable to request irq %d\n", irq);
-+ goto cleanup;
-+ }
-+ chip->irq = irq;
-+
-+ memcpy(&chip->image, &snd_at73c213_original_image,
-+ sizeof(snd_at73c213_original_image));
-+
-+ retval = snd_at73c213_chip_init(chip);
-+ if (retval)
-+ goto cleanup;
-+
-+ retval = snd_at73c213_pcm_new(chip, 0);
-+ if (retval)
-+ goto cleanup;
-+
-+ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+ if (retval)
-+ goto cleanup;
-+
-+ retval = snd_at73c213_mixer(chip);
-+ if (retval)
-+ goto cleanup;
-+
-+ snd_card_set_dev(card, &spi->dev);
-+
-+ return retval;
-+
-+cleanup:
-+ if (!list_empty(&card->devices))
-+ snd_device_free(card, chip);
-+ if (chip->pcm)
-+ dev_dbg(&spi->dev, "FIXME: howto free pcm?\n");
-+ if (chip->irq >= 0) {
-+ free_irq(chip->irq, chip);
-+ chip->irq = -1;
-+ }
-+ return retval;
-+}
-+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+ struct at73c213_board_info *info;
-+ struct clk *dac_clk;
-+ struct snd_card *card;
-+ struct snd_at73c213 *chip;
-+ int retval;
-+ char id[16];
-+
-+ info = spi->dev.platform_data;
-+ if (!info) {
-+ dev_dbg(&spi->dev, "no platform_data\n");
-+ return -ENXIO;
-+ }
-+
-+ dac_clk = clk_get(NULL, info->dac_clk);
-+ if (IS_ERR(dac_clk)) {
-+ dev_dbg(&spi->dev, "unable to get DAC clk '%s'\n",
-+ info->dac_clk);
-+ return (PTR_ERR(dac_clk));
-+ }
-+
-+ retval = -ENOMEM;
-+
-+ /* allocate "card" using some unused identifiers */
-+ snprintf(id, sizeof id, "at73c213_%d", info->i2s_dev);
-+ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+ if (!card)
-+ goto cleanup_card;
-+
-+ chip = card->private_data;
-+ chip->spi = spi;
-+ chip->info = info;
-+ chip->dac_clk = dac_clk;
-+
-+ chip->ssc = ssc_request(info->i2s_dev);
-+ if (IS_ERR(chip->ssc)) {
-+ dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+ info->i2s_dev);
-+ retval = (PTR_ERR(chip->ssc));
-+ goto cleanup;
-+ }
-+
-+ retval = snd_at73c213_init(card, spi);
-+ if (retval)
-+ goto cleanup;
-+
-+ strcpy(card->driver, "at73c213");
-+ strcpy(card->shortname, info->shortname);
-+ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
-+
-+ retval = snd_card_register(card);
-+ if (retval)
-+ goto cleanup;
-+
-+ dev_set_drvdata(&spi->dev, card);
-+ return 0;
-+
-+cleanup:
-+ if (IS_ERR(chip->ssc))
-+ ssc_free(chip->ssc);
-+ if (card)
-+ snd_card_free(card);
-+cleanup_card:
-+ if (dac_clk)
-+ clk_put(dac_clk);
-+ return retval;
-+}
-+
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
-+ int retval;
-+
-+ /* Stop playback */
-+ ssc_disable(chip->ssc, 1, 0);
-+
-+ /* Mute sound */
-+ write_reg(chip, DAC_LMPG, 0x3F);
-+ chip->image[DAC_LMPG] = 0x3F;
-+ write_reg(chip, DAC_RMPG, 0x3F);
-+ chip->image[DAC_RMPG] = 0x3F;
-+ write_reg(chip, DAC_LLOG, 0x3F);
-+ chip->image[DAC_LLOG] = 0x3F;
-+ write_reg(chip, DAC_RLOG, 0x3F);
-+ chip->image[DAC_RLOG] = 0x3F;
-+ write_reg(chip, DAC_LLIG, 0x11);
-+ chip->image[DAC_LLIG] = 0x11;
-+ write_reg(chip, DAC_RLIG, 0x11);
-+ chip->image[DAC_RLIG] = 0x11;
-+ write_reg(chip, DAC_AUXG, 0x11);
-+ chip->image[DAC_AUXG] = 0x11;
-+
-+ /* Turn off PA */
-+ write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F));
-+ chip->image[PA_CTRL] |= 0x0F;
-+ msleep(10);
-+ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
-+ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
-+
-+ /* Turn off external DAC */
-+ write_reg(chip, DAC_CTRL, 0x0C);
-+ chip->image[DAC_CTRL] = 0x0C;
-+ msleep(2);
-+ write_reg(chip, DAC_CTRL, 0x00);
-+ chip->image[DAC_CTRL] = 0x00;
-+
-+ /* Turn off master power */
-+ write_reg(chip, DAC_PRECH, 0x00);
-+ chip->image[DAC_PRECH] = 0x00;
-+
-+ /* Stop DAC master clock */
-+ if (chip->dac_clk) {
-+ clk_disable(chip->dac_clk);
-+ clk_put(chip->dac_clk);
-+ }
-+
-+out:
-+ if (card) {
-+ snd_card_free(card);
-+ dev_set_drvdata(&spi->dev, NULL);
-+ }
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
-+
-+ ssc_disable(chip->ssc, 1, 0);
-+ clk_disable(chip->dac_clk);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_resume(struct spi_device *spi)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
-+
-+ clk_enable(chip->dac_clk);
-+ ssc_enable(chip->ssc, 1, 0);
-+
-+ return 0;
-+}
-+#endif /* CONFIG_PM */
-+
-+/* Driver core initialization */
-+static struct spi_driver at73c213_driver = {
-+ .driver = {
-+ .name = "at73c213",
-+ },
-+ .probe = snd_at73c213_probe,
-+#ifdef CONFIG_PM
-+ .suspend = snd_at73c213_suspend,
-+ .resume = snd_at73c213_resume,
-+#endif
-+ .remove = __devexit_p(snd_at73c213_remove),
-+};
-+
-+static int __init at73c213_init(void)
-+{
-+ return spi_register_driver(&at73c213_driver);
-+}
-+module_init(at73c213_init);
-+
-+static void __exit at73c213_exit(void)
-+{
-+ spi_unregister_driver(&at73c213_driver);
-+}
-+module_exit(at73c213_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
-+MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
---- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL 0x00
-+#define DAC_CTRL_ONPADRV 7
-+#define DAC_CTRL_ONAUXIN 6
-+#define DAC_CTRL_ONDACR 5
-+#define DAC_CTRL_ONDACL 4
-+#define DAC_CTRL_ONLNOR 3
-+#define DAC_CTRL_ONLNOL 2
-+#define DAC_CTRL_ONLNIR 1
-+#define DAC_CTRL_ONLNIL 0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG 0x01
-+#define DAC_LLIG_LLIG 0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG 0x02
-+#define DAC_RLIG_RLIG 0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG 0x03
-+#define DAC_LMPG_LMPG 0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG 0x04
-+#define DAC_RMPG_RMPG 0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG 0x05
-+#define DAC_LLOG_LLOG 0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG 0x06
-+#define DAC_RLOG_RLOG 0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC 0x07
-+#define DAC_OLC_RSHORT 7
-+#define DAC_OLC_ROLC 4
-+#define DAC_OLC_LSHORT 3
-+#define DAC_OLC_LOLC 0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC 0x08
-+#define DAC_MC_INVR 5
-+#define DAC_MC_INVL 4
-+#define DAC_MC_RMSMIN2 3
-+#define DAC_MC_RMSMIN1 2
-+#define DAC_MC_LMSMIN2 1
-+#define DAC_MC_LMSMIN1 0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC 0x09
-+#define DAC_CSFC_OVRSEL 4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC 0x0A
-+#define DAC_MISC_VCMCAPSEL 7
-+#define DAC_MISC_DINTSEL 4
-+#define DAC_MISC_DITHEN 3
-+#define DAC_MISC_DEEMPEN 2
-+#define DAC_MISC_NBITS 0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH 0x0C
-+#define DAC_PRECH_PRCHGPDRV 7
-+#define DAC_PRECH_PRCHGAUX1 6
-+#define DAC_PRECH_PRCHGLNOR 5
-+#define DAC_PRECH_PRCHGLNOL 4
-+#define DAC_PRECH_PRCHGLNIR 3
-+#define DAC_PRECH_PRCHGLNIL 2
-+#define DAC_PRECH_PRCHG 1
-+#define DAC_PRECH_ONMSTR 0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG 0x0D
-+#define DAC_AUXG_AUXG 0
-+
-+/* DAC Reset Register */
-+#define DAC_RST 0x10
-+#define DAC_RST_RESMASK 2
-+#define DAC_RST_RESFILZ 1
-+#define DAC_RST_RSTZ 0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL 0x11
-+#define PA_CTRL_APAON 6
-+#define PA_CTRL_APAPRECH 5
-+#define PA_CTRL_APALP 4
-+#define PA_CTRL_APAGAIN 0
-+
-+#endif /* _SND_AT73C213_H */