summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/Config.in50
-rw-r--r--target/Makefile.in15
-rw-r--r--target/linux/Config.in33
-rw-r--r--target/linux/Config.in.advanced463
-rw-r--r--target/linux/Config.in.versions62
-rw-r--r--target/linux/Makefile.in250
-rw-r--r--target/linux/Makefile.in.advanced532
7 files changed, 0 insertions, 1405 deletions
diff --git a/target/Config.in b/target/Config.in
deleted file mode 100644
index 2d967931e..000000000
--- a/target/Config.in
+++ /dev/null
@@ -1,50 +0,0 @@
-menu "Kernel"
-choice
- prompt "Kernel type"
- default BR2_KERNEL_none
-
-config BR2_KERNEL_none
- bool "none"
- help
- Do not build a kernel
-
-config BR2_KERNEL_LINUX_ADVANCED
- bool "linux (Advanced configuration)"
- select BR2_PACKAGE_LINUX
- help
- The Linux kernel - Advanced Configuration.
- http://www.kernel.org/
-
- Note: Requires kernel-headers >= 2.6.19 since the other
- kernel headers are just that (headers) and not full
- kernels. This is a feature.
-
-# The kernel with the same version as linux headers cannot be compiled
-# when using an external toolchain, because the linux headers are not
-# handled by Buildroot in this case.
-if BR2_TOOLCHAIN_BUILDROOT
-
-config BR2_KERNEL_LINUX
- bool "linux (Same version as linux headers)"
- select BR2_PACKAGE_LINUX
- help
- The Linux kernel.
- http://www.kernel.org/
-
- Note: Requires kernel-headers >= 2.6.19 since the other
- kernel headers are just that (headers) and not full
- kernels. This is a feature.
-
-endif
-
-endchoice
-
-config BR2_PACKAGE_LINUX
- bool
-
-if BR2_PACKAGE_LINUX
-source "target/linux/Config.in"
-source "target/linux/Config.in.advanced"
-endif
-
-endmenu
diff --git a/target/Makefile.in b/target/Makefile.in
index 83dc4a5a0..475cd6e5b 100644
--- a/target/Makefile.in
+++ b/target/Makefile.in
@@ -1,6 +1,3 @@
-BR2_PACKAGE_LINUX_FORMAT:=$(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT))
-BR2_PACKAGE_LINUX_KCONFIG:=$(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG))
-
# make sure to put everything that is board-specific before the tarroot targets
include target/generic/Makefile.in
@@ -8,16 +5,4 @@ include target/generic/Makefile.in
include target/device/Makefile.in
include target/xtensa/Makefile.in
-# kernel rules
-# We already did add the kernel target to TARGETS and now just pull in the rules
-# to actually build this target.
-
-ifeq ($(BR2_KERNEL_LINUX),y)
-include target/linux/Makefile.in
-endif
-
-ifeq ($(BR2_KERNEL_LINUX_ADVANCED),y)
-include target/linux/Makefile.in.advanced
-endif
-
include target/device/Makefile.in.linux
diff --git a/target/linux/Config.in b/target/linux/Config.in
deleted file mode 100644
index c79fca2dd..000000000
--- a/target/linux/Config.in
+++ /dev/null
@@ -1,33 +0,0 @@
-#comment "Linux kernel options"
-
-if BR2_KERNEL_LINUX
-config BR2_PACKAGE_LINUX_KCONFIG
- string ".config file"
- depends on BR2_PACKAGE_LINUX
- default ""
- help
- kernel's .config to use to build a kernel for the target.
-
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_KCONFIG=<path> to
- make.
-
-config BR2_PACKAGE_LINUX_FORMAT
- string "kernel binary format"
- depends on BR2_PACKAGE_LINUX
- default ""
- help
- kernel binary format.
- Popular values include:
- - bzImage
- - zImage
- and other, architecture dependant formats.
-
- Note that the default format is supposed to be set by your
- board-description, if any.
- i386 and compatible default to bzImage if nothing was given
- above.
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_FORMAT=<string> to
- make.
-endif
diff --git a/target/linux/Config.in.advanced b/target/linux/Config.in.advanced
deleted file mode 100644
index 645ed2e3a..000000000
--- a/target/linux/Config.in.advanced
+++ /dev/null
@@ -1,463 +0,0 @@
-if BR2_KERNEL_LINUX_ADVANCED
-# --- "Linux kernel options"
-# This file exports the following symbols for use by Makefile's
-#
-# BR2_PACKAGE_LINUX
-#
-# BR2_KERNEL_SITE
-# BR2_DOWNLOAD_LINUX26_VERSION
-# BR2_LINUX26_VERSION
-#
-# BR2_KERNEL_PATCH_SITE
-# BR2_KERNEL_PATCH
-#
-# BR2_LINUX26_CUSTOM
-# BR2_CUSTOM_LINUX26_PATCH_SITE
-# BR2_CUSTOM_LINUX26_PATCH
-#
-# BR2_LINUX_BSP_PATCH
-#
-# BR2_PACKAGE_LINUX_USE_KCONFIG
-# BR2_PACKAGE_LINUX_USE_DEFCONFIG
-# BR2_PACKAGE_LINUX_USE_XCONFIG
-# BR2_PACKAGE_LINUX_KCONFIG
-#
-# BR2_PACKAGE_LINUX_FORMAT
-#
-# BR2_LINUX_COPYTO_ROOTFS
-# BR2_LINUX_COPYTO_TFTPBOOT
-# BR2_LINUX_COPYTO
-#
-
-source "target/linux/Config.in.versions"
-
-config BR2_KERNEL_PATCH_LEVEL
- string
- default $(BR2_KERNEL_LATEST_2_6_33) if BR2_LINUX_2_6_33 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default $(BR2_KERNEL_LATEST_2_6_32) if BR2_LINUX_2_6_32 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default $(BR2_KERNEL_LATEST_2_6_31) if BR2_LINUX_2_6_31 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default $(BR2_KERNEL_LATEST_2_6_30) if BR2_LINUX_2_6_30 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default $(BR2_KERNEL_LATEST_2_6_29) if BR2_LINUX_2_6_29 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default $(BR2_KERNEL_LATEST_2_6_28) if BR2_LINUX_2_6_28 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default $(BR2_KERNEL_LATEST_2_6_27) if BR2_LINUX_2_6_27 && BR2_KERNEL_ADD_LATEST_MINORPATCH
- default "$(BR2_KERNEL_MINORLEVEL)" if BR2_KERNEL_ADD_MINORPATCH
-
-config BR2_KERNEL_NEXT_VERSION
- string
- default "2.6.34" if BR2_LINUX_2_6_33
- default "2.6.33" if BR2_LINUX_2_6_32
- default "2.6.32" if BR2_LINUX_2_6_31
- default "2.6.31" if BR2_LINUX_2_6_30
- default "2.6.30" if BR2_LINUX_2_6_29
- default "2.6.29" if BR2_LINUX_2_6_28
- default "2.6.28" if BR2_LINUX_2_6_27
-
-config BR2_KERNEL_THIS_VERSION
- string
- default "2.6.33" if BR2_LINUX_2_6_33
- default "2.6.32" if BR2_LINUX_2_6_32
- default "2.6.31" if BR2_LINUX_2_6_31
- default "2.6.30" if BR2_LINUX_2_6_30
- default "2.6.29" if BR2_LINUX_2_6_29
- default "2.6.28" if BR2_LINUX_2_6_28
- default "2.6.27" if BR2_LINUX_2_6_27
-
-config BR2_KERNEL_SITE
- string
- default "http://ftp.kernel.org/pub/linux/kernel/v2.6"
-
-config BR2_KERNEL_PATCH_SITE
- string
- default "$(BR2_KERNEL_SITE)" if BR2_KERNEL_ADD_LATEST_MINORPATCH
- default "$(BR2_KERNEL_SITE)" if BR2_KERNEL_ADD_MINORPATCH
- default "$(BR2_KERNEL_SITE)/testing" if BR2_KERNEL_ADD_LATEST_RC_PATCH
- default "$(BR2_KERNEL_SITE)/testing" if BR2_KERNEL_ADD_RC_PATCH
- default "$(BR2_KERNEL_SITE)/snapshots" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
- default "$(BR2_KERNEL_SITE)/snapshots" if BR2_KERNEL_ADD_SNAPSHOT
- default $(BR2_CUSTOM_LINUX26_PATCH_SITE) if BR2_LINUX26_CUSTOM
-
-config BR2_LINUX26_RC_VERSION
- string
- default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)" if BR2_KERNEL_ADD_RC_PATCH
-
-config BR2_LINUX26_SNAPSHOT_VERSION
- string
- default "$(BR2_KERNEL_THIS_VERSION)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
-
-config BR2_LINUX26_RC_SNAPSHOT_VERSION
- string
- default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
-
-# ---------------------------------------------------------------------------
-
-choice
- prompt "Linux Kernel Version"
- default BR2_LINUX_2_6_STABLE
- help
- Select the specific Linux version you want to use
-
-config BR2_LINUX_2_6_STABLE
- bool "The latest stable Linux kernel (2.6.33.4)"
-
-config BR2_LINUX_2_6_33
- bool "Linux 2.6.33"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_32
- bool "Linux 2.6.32"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_31
- bool "Linux 2.6.31"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_30
- bool "Linux 2.6.30"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_29
- bool "Linux 2.6.29"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_28
- bool "Linux 2.6.28"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_27
- bool "Linux 2.6.27"
- select BR2_KERNEL_BASE
-
-config BR2_LINUX26_CUSTOM
- bool "Linux <custom> version"
-
-endchoice
-
-if BR2_LINUX26_CUSTOM
-config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION
- string "Linux Tarball version"
- default "2.6.31"
- help
- Specify any .tar.bz2 file
-
-config BR2_CUSTOM_LINUX26_VERSION
- string "Linux Version"
- default "2.6.31"
- help
- Specify what the linux version will be called
-
-config BR2_CUSTOM_LINUX26_PATCH
- string "patch name"
- default "patch-2.6.31-rc4.bz2"
- help
- Specify a patch to be downloaded
-
-config BR2_CUSTOM_LINUX26_PATCH_SITE
- string "patch site"
- default "http://www.kernel.org/pub/linux/kernel/v2.6/testing"
- help
- Specify from where the patch will be downloaded.
-endif
-
-# -----------------------------------------------
-
-menu "Patches"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_KERNEL_ADD_KERNEL_ORG_PATCH
- bool "Add kernel.org patch"
- depends on BR2_KERNEL_BASE
- help
- Add pre, snapshot or -mm patches
- from http://www.kernel.org/
-
-config BR2_KERNEL_ADD_LATEST
- bool "Use only the latest patch version"
- default y
- depends on BR2_KERNEL_ADD_KERNEL_ORG_PATCH
- help
- Restrict the choices to the latest versions
-
-choice
- prompt "Add a kernel.org patch to the Linux Kernel"
- depends on BR2_PACKAGE_LINUX
- depends on !BR2_KERNEL_PREPATCHED
- depends on BR2_KERNEL_ADD_KERNEL_ORG_PATCH
- help
- Select a patch to add to the Linux kernel
-
-config BR2_KERNEL_ADD_LATEST_MINORPATCH
- bool "Add _latest_ '.#' minor patch"
- depends on BR2_KERNEL_ADD_LATEST
- select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_MINORPATCH
- bool "Add a '.#' minor patch"
- depends on !BR2_KERNEL_ADD_LATEST
- select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_LATEST_RC_PATCH
- bool "Add _latest_ '-rc#' patch"
- depends on BR2_KERNEL_ADD_LATEST
- select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_RC_PATCH
- bool "Add an '-rc#' patch"
- depends on !BR2_KERNEL_ADD_LATEST
- select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_LATEST_SNAPSHOT
- bool "Add _latest_ 'snapshot' patch"
- depends on BR2_KERNEL_ADD_LATEST
- select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_SNAPSHOT
- bool "Add a 'snapshot' patch (linux-2.6.X-rc#-git#)"
- depends on !BR2_KERNEL_ADD_LATEST
- select BR2_KERNEL_ADD_PATCH
-
-endchoice
-
-config BR2_KERNEL_ADD_PATCH
- bool
-
-config BR2_KERNEL_MINORLEVEL
- string "patch level"
- default ""
- depends on BR2_KERNEL_ADD_MINORPATCH
-
-config BR2_KERNEL_RC_LEVEL
- string "-rc patch level"
- default ""
- depends on BR2_KERNEL_ADD_RC_PATCH || BR2_KERNEL_ADD_SNAPSHOT
-
-config BR2_KERNEL_GIT_LEVEL
- string "-git patch level"
- default ""
- depends on BR2_KERNEL_ADD_SNAPSHOT
-
-source "target/device/Config.in.linux.patches"
-
-config BR2_LINUX_BSP_PATCH
- string "Additional patch to apply (from \$(DL_DIR))"
- default ""
- help
- Apply a patch located in \$(DL_DIR).
- You need to download or create this before
- enable this option
-
-config BR2_KERNEL_PATCH
- string
- default "patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2" if BR2_KERNEL_ADD_LATEST_MINORPATCH
- default "patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2" if BR2_KERNEL_ADD_MINORPATCH
- default "patch-$(LINUX26_LATEST_RC_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_RC_PATCH
- default "patch-$(BR2_LINUX26_RC_VERSION).bz2" if BR2_KERNEL_ADD_RC_PATCH
- default "patch-$(LINUX26_LATEST_GIT_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
- default "patch-$(BR2_LINUX26_SNAPSHOT_VERSION).bz2" if BR2_KERNEL_ADD_SNAPSHOT
- default "$(BR2_CUSTOM_LINUX26_PATCH)" if BR2_LINUX26_CUSTOM
-
-config BR2_EXTRA_VERSION
- string
- default ".$(BR2_KERNEL_PATCH_LEVEL)" if BR2_KERNEL_ADD_LATEST_MINORPATCH
- default ".$(BR2_KERNEL_PATCH_LEVEL)" if BR2_KERNEL_ADD_MINORPATCH
- default "$(BR2_KERNEL_RC_LEVEL)" if BR2_KERNEL_ADD_LATEST_RC_PATCH
- default "$(BR2_KERNEL_RC_LEVEL)" if BR2_KERNEL_ADD_RC_PATCH
- default "$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
- default "$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
- default "" if BR2_LINUX26_CUSTOM
-endmenu
-
-# -----------------------------------------------
-
-config BR2_KERNEL_PREPATCHED
- bool
-
-config BR2_KERNEL_BASE
- bool
-
-config BR2_KERNEL_LATEST
- bool
-
-config BR2_DOWNLOAD_LINUX26_VERSION
- string
- default "$(BR2_KERNEL_THIS_VERSION)" if BR2_KERNEL_BASE
- default "$(BR2_KERNEL_CURRENT_VERSION)" if BR2_LINUX_2_6_STABLE
- default "$(BR2_DEFAULT_KERNEL_HEADERS)" if BR2_KERNEL_LINUX_HEADERS_VERSION
- default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX26_CUSTOM
-
-config BR2_LINUX26_VERSION
- string
- default "$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)" if BR2_KERNEL_ADD_LATEST_MINORPATCH&& BR2_KERNEL_BASE
- default "$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)" if BR2_KERNEL_ADD_MINORPATCH && BR2_KERNEL_BASE
- default "$(LINUX26_LATEST_RC_VERSION)" if BR2_KERNEL_ADD_LATEST_RC_PATCH
- default "$(BR2_LINUX26_RC_VERSION)" if BR2_KERNEL_ADD_RC_PATCH && BR2_KERNEL_BASE
- default "$(LINUX26_LATEST_GIT_VERSION)" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
- default "$(BR2_LINUX26_SNAPSHOT_VERSION)" if BR2_KERNEL_ADD_SNAPSHOT && BR2_KERNEL_BASE
- default "$(BR2_KERNEL_THIS_VERSION)" if ! BR2_KERNEL_ADD_PATCH && BR2_KERNEL_BASE
- default "$(BR2_KERNEL_CURRENT_VERSION)"if BR2_LINUX_2_6_STABLE
- default "$(BR2_CUSTOM_LINUX26_VERSION)" if BR2_LINUX26_CUSTOM
-
-menu "Linux Kernel Configuration"
-
-choice
- prompt "Linux Kernel Configuration"
- depends on BR2_PACKAGE_LINUX
- default BR2_PACKAGE_LINUX_USE_KCONFIG
- help
- Select the way to configure the Linux
-
-config BR2_PACKAGE_LINUX_USE_KCONFIG
- bool ".config file"
- depends on BR2_PACKAGE_LINUX
- help
- kernel's .config to use to build a kernel for the target.
-
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_KCONFIG=<path> to
- make.
-
-config BR2_PACKAGE_LINUX_USE_DEFCONFIG
- bool "Run make <board>_defconfig "
- depends on BR2_PACKAGE_LINUX
- help
- Configure Linux by make <board>_defconfig
- You have to supply a BOARD_NAME, either by
- defining it in a BSP or by make BOARD_NAME=<board>
-
-config BR2_PACKAGE_LINUX_USE_XCONFIG
- bool "Run make ARCH=$(ARCH) [xconfig|menuconfig] before build"
- depends on BR2_PACKAGE_LINUX
- help
- Configure Linux by make xconfig|menuconfig
-endchoice
-
-config BR2_PACKAGE_LINUX_KCONFIG
- string ".config file"
- depends on BR2_PACKAGE_LINUX_USE_KCONFIG
- default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX26_VERSION).config"
- help
- kernel's .config to use to build a kernel for the target.
-
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_KCONFIG=<path> to
- make.
-
-choice
- prompt "Preferred config tool"
- default BR2_MAKE_MENUCONFIG
- depends on BR2_PACKAGE_LINUX_USE_XCONFIG
- help
- Define the preferred tool to invoke if a configuration is invalid
-
-config BR2_MAKE_XCONFIG
- bool "make xconfig (needs QT3 headers on host)"
- help
- Run "make xconfig" if kernel ".config" is invalid
-
-config BR2_MAKE_MENUCONFIG
- bool "make menuconfig"
- help
- Run "make menuconfig" if kernel ".config" is invalid
-
-endchoice
-
-config BR2_KERNEL_CONFIG_METHOD
- string
- default "xconfig" if BR2_MAKE_XCONFIG
- default "menuconfig" if BR2_MAKE_MENUCONFIG
-
-endmenu
-
-choice
- prompt "kernel binary format"
- depends on BR2_PACKAGE_LINUX
- default BR2_LINUX_BIN_BZIMAGE if BR2_i386
- default BR2_LINUX_BIN_BZIMAGE if BR2_x86_64
- default BR2_LINUX_BIN_UIMAGE
- help
- Select the specific Linux binary type you want to use
-
-config BR2_LINUX_BIN_BZIMAGE
- bool "bzImage"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_UIMAGE
- bool "uImage"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_VMLINUX
- bool "vmlinux"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_ZIMAGE
- bool "zImage"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_CUSTOM
- bool "<custom> Linux binary"
- depends on BR2_PACKAGE_LINUX
- help
- Build custom Linux binary format
-
-endchoice
-
-config BR2_LINUX_BIN_CUSTOM_BIN
- string "custom kernel binary format"
- depends on BR2_LINUX_BIN_CUSTOM
- default ""
- help
- Which Linux binary format?
-
-config BR2_PACKAGE_LINUX_FORMAT
- string #"kernel binary format"
- depends on BR2_PACKAGE_LINUX
- default "bzImage" if BR2_LINUX_BIN_BZIMAGE
- default "uImage" if BR2_LINUX_BIN_UIMAGE
- default "vmlinux" if BR2_LINUX_BIN_VMLINUX
- default "zImage" if BR2_LINUX_BIN_ZIMAGE
- default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM
- help
- kernel binary format.
- Popular values include:
- - bzImage
- - zImage
- - vmlinux
- - zImage
- - xipImage
- and other, architecture dependant formats.
-
- Note that the default format is supposed to be set by your
- board-description, if any.
- i386 and compatible default to bzImage if nothing was given
- above.
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_FORMAT=<string> to
- make.
-
-menu "Destinations for linux kernel binaries"
-
-config BR2_LINUX_COPYTO_ROOTFS
- bool "Copy kernel to root file system"
- depends on BR2_PACKAGE_LINUX
- help
- Copy kernel to <root>/boot directory
-
-config BR2_LINUX_COPYTO_TFTPBOOT
- bool "Copy kernel to /tftpboot"
- help
- Copy kernel to /tftpboot directory
-
-config BR2_LINUX_COPYTO
- string "Copy kernel to <dir>..."
- default ""
- help
- Copy kernel to secondary location
-
-config BR2_LINUX_COPY_CONFIGURATION
- bool "Copy buildroot configuration to Linux file system"
- help
- The configuration files for buildroot, uclibc, busybox and linux
- are copied to the "<root>/boot" directory.
-
-endmenu
-endif
-
diff --git a/target/linux/Config.in.versions b/target/linux/Config.in.versions
deleted file mode 100644
index c5263a44d..000000000
--- a/target/linux/Config.in.versions
+++ /dev/null
@@ -1,62 +0,0 @@
-# This file defines the latest version of
-# You also have to edit BR2_LINUX_2_6_STABLE
-# in target/linux/Config.in.advanced
-# which is approximately at line 136
-
-config LINUX26_LATEST_RC_VERSION
- string
- default "2.6.31-rc4" if BR2_KERNEL_ADD_LATEST_RC_PATCH
- help
- Not really available as of 20090103
-
-config LINUX26_LATEST_GIT_VERSION
- string
- default "2.6.30-rc4-git4" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
-
-config BR2_KERNEL_CURRENT_VERSION
- string
- default "2.6.33.4"
- help
- This is the latest stable kernel (including minor version).
-
-config BR2_KERNEL_LATEST_2_6_33
- string
- default "4"
- help
- Released 2010-May-12.
-
-config BR2_KERNEL_LATEST_2_6_32
- string
- default "13"
- help
- Released 2010-May-12.
-
-config BR2_KERNEL_LATEST_2_6_31
- string
- default "13"
- help
- Released 2010-Apr-01 (last .31-stable release).
-
-config BR2_KERNEL_LATEST_2_6_30
- string
- default "10"
- help
- Released 2009-Dec-04 (last .30-stable release).
-
-config BR2_KERNEL_LATEST_2_6_29
- string
- default "6"
- help
- Released 2009-Jul-02 (last .29-stable release).
-
-config BR2_KERNEL_LATEST_2_6_28
- string
- default "10"
- help
- Released 2009-May-02 (last .28-stable release).
-
-config BR2_KERNEL_LATEST_2_6_27
- string
- default "46"
- help
- Released 2010-Apr-01.
diff --git a/target/linux/Makefile.in b/target/linux/Makefile.in
deleted file mode 100644
index f01982440..000000000
--- a/target/linux/Makefile.in
+++ /dev/null
@@ -1,250 +0,0 @@
-#############################################################
-#
-# Linux kernel 2.6 target
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-
-ifeq ($(DOWNLOAD_LINUX26_VERSION),)
-# User did not define linux version, try using headers
-ifeq ($(LINUX_HEADERS_VERSION),)
-# We did not have headers (this is for real???)
-# Version of linux before patches
-DOWNLOAD_LINUX26_VERSION=2.6.22.1
-# Version of Linux after applying any patches
-LINUX26_VERSION=2.6.22.1
-else
-# OK, we have headers, use them...
-DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-endif
-endif
-
-LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_BZCAT:=$(BZCAT)
-LINUX26_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6
-
-ifeq ($(BOARD_PATH),)
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-endif
-
-# Linux kernel configuration file
-# Has to be set by the target/device
-# If it is not set by the target/device, then pick the one from .config
-ifndef LINUX26_KCONFIG
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG)),)
-LINUX26_KCONFIG=$(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG))
-else
-# LINUX26_KCONFIG=$(BOARD_PATH)/linux26.config
-endif
-endif
-
-ifndef LINUX26_FORMAT
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT)),)
-LINUX26_FORMAT=$(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT))
-else
-ifneq ($(filter i386 x86-64,$(KERNEL_ARCH)),)
-# zImage target no longer available on x86 since 2.6.30
-LINUX26_FORMAT=bzImage
-else
-LINUX26_FORMAT=zImage
-endif
-endif
-endif
-
-# Has to be set by the target/device
-ifndef LINUX26_BINLOC
-# default:
-ifeq ($(LINUX26_FORMAT),vmlinux)
-LINUX26_BINLOC=$(LINUX26_FORMAT)
-else
-ifeq ($(BR2_ARCH),"cris")
-LINUX26_BINLOC=arch/$(KERNEL_ARCH)/arch-v10/boot/$(LINUX26_FORMAT)
-else
-LINUX26_BINLOC=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
-endif
-endif
-endif
-
-# File name for the Linux kernel binary
-ifndef LINUX26_KERNEL
-LINUX26_KERNEL_NAME=$(BINARIES_DIR)/$(LINUX26_FORMAT)
-endif
-
-# Version of Linux AFTER patches
-LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# for packages that need it
-LINUX_VERSION:=$(LINUX26_VERSION)
-LINUX_DIR=$(LINUX26_DIR)
-LINUX_KERNEL=$(LINUX26_KERNEL_NAME)
-
-# kernel patches
-ifeq ($(strip $(LINUX26_PATCH_DIR)),)
-ifneq ($(BOARD_PATH),)
-LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches/
-endif
-endif
-LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \
- ARCH=$(KERNEL_ARCH) \
- INSTALL_MOD_PATH=$(TARGET_DIR) \
- CROSS_COMPILE=$(TARGET_CROSS) \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- LZMA="$(LZMA)"
-
-$(LINUX26_KCONFIG):
- @if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
- echo ""; \
- echo "You should create a .config for your kernel"; \
- echo "and install it as $(LINUX26_KCONFIG)"; \
- echo ""; \
- sleep 5; \
- fi
-
-ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
-$(DL_DIR)/$(LINUX26_SOURCE):
- $(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
-endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
- rm -rf $(LINUX26_DIR)
- @echo "*** Unpacking kernel source"
- $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
- # Rename the dir from the downloaded version to the AFTER patch version
- mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
-endif
- touch $@
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS)
- toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \
- linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-ifeq ($(BR2_KERNEL_HEADERS_RT),y)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE)
-endif
-ifneq ($(KERNEL_HEADERS_PATCH_DIR),)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \
- linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-endif
-ifeq ($(BR2_PACKAGE_OPENSWAN),y)
- toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \
- linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-endif
-ifneq ($(LINUX26_PATCH_DIR),)
- if [ -d $(LINUX26_PATCH_DIR) ] ; then \
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) linux-$(LINUX26_VERSION)\*.patch ; \
- fi
-endif
- touch $@
-
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
- cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
- $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_ARM_EABI),y)
- echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
- $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
- echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
-else
- echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
-endif
- $(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_INET_IPV6),y)
- echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config
-else
- echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config
-endif
- $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
- $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
- echo "CONFIG_INITRAMFS_SOURCE=\"$(BINARIES_DIR)/rootfs.initramfs\"" >> \
- $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-else
- echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config
-endif
-ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
- # precedence for a small initramfs
- $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
- $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \
- $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-endif
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
- touch $@
-
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
- touch $@
-
-$(LINUX26_KERNEL_NAME): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \
- $(LINUX26_DIR)/.depend_done
- $(MAKE) $(LINUX26_MAKE_FLAGS) \
- -C $(LINUX26_DIR) $(LINUX26_FORMAT)
- cp -pf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL_NAME)
- touch -c $@
-
-$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_DIR)/.configured
- rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
- rm -f $(TARGET_DIR)/sbin/cardmgr
- @if grep -q CONFIG_MODULES=y $(LINUX26_DIR)/.config; then \
- set -x; \
- echo "Have CONFIG_MODULES"; \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules; \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
- DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
- INSTALL_MOD_PATH=$(TARGET_DIR) modules_install; \
- rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build \
- $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/source; \
- $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX_HEADERS_VERSION); \
- else \
- echo "No CONFIG_MODULES"; \
- fi
- touch -c $@
-
-linux26-menuconfig: host-sed dirs $(LINUX26_DIR)/.patched
- if [ ! -f $(LINUX26_DIR)/.config ]; then \
- [ -n "$(LINUX26_KCONFIG)" ] && [ -f $(LINUX26_KCONFIG) ] && \
- cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config || \
- true; \
- fi
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
- -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26-xconfig: host-sed dirs $(LINUX26_DIR)/.patched
- [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
- -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26: $(LINUX26_KERNEL_NAME)
-
-$(LINUX26_DIR)/.modules_installed: $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
- touch $@
-
-linux26-modules: cross-depmod26 $(LINUX26_DIR)/.modules_installed
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-linux26-unpacked: $(LINUX26_DIR)/.patched
-
-linux26-config: host-sed $(LINUX26_DIR)/.configured
-
-linux26-update:
- cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
-
-# force rebuild
-linux26-force:
- touch $(LINUX26_DIR)/.configured
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
- rm -f $(LINUX26_KERNEL_NAME) $(LINUX26_DIR)/.configured
- -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
- rm -rf $(LINUX26_DIR)
-
-endif
diff --git a/target/linux/Makefile.in.advanced b/target/linux/Makefile.in.advanced
deleted file mode 100644
index 9cbbd2c74..000000000
--- a/target/linux/Makefile.in.advanced
+++ /dev/null
@@ -1,532 +0,0 @@
-###############################################################################
-#
-# Linux kernel 2.6 target (Advanced configuration)
-#
-###############################################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-# -----------------------------------------------------------------------------
-# Make sure LINUX_HEADERS_VERSION is defined
-ifeq ($(LINUX_HEADERS_VERSION),)
-# We did not have headers (this is for real???)
-LINUX_HEADERS_VERSION:=2.6.22.1
-endif
-
-# -----------------------------------------------------------------------------
-# STRATEGY FOR DOWNLOAD_LINUX26_VERSION
-# 1. Use definition from user Makefile
-# 2. Use definition from Kconfig
-# 3. Use Linux Headers version
-# 4. Use default (2.6.22.1)
-ifeq ($(DOWNLOAD_LINUX26_VERSION),)
-ifneq ($(BR2_DOWNLOAD_LINUX26_VERSION),)
-DOWNLOAD_LINUX26_VERSION:=$(call qstrip,$(BR2_DOWNLOAD_LINUX26_VERSION))
-else
-DOWNLOAD_LINUX26_VERSION:=$(LINUX_HEADERS_VERSION)
-endif
-endif
-
-# -----------------------------------------------------------------------------
-# STRATEGY FOR LINUX26_VERSION
-# 1. Use definition from user Makefile
-# 2. Use definition from Kconfig
-# 3. Use Linux Headers version
-# 4. Use default (2.6.22.1)
-ifeq ($(LINUX26_VERSION),)
-ifneq ($(BR2_LINUX26_VERSION),)
-LINUX26_VERSION:=$(call qstrip,$(BR2_LINUX26_VERSION))
-else
-LINUX26_VERSION:=$(LINUX_HEADERS_VERSION)
-endif
-endif
-
-# Ask the kernel what version number it will use when installing modules
-LINUX26_VERSION_PROBED = `$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) --no-print-directory -s kernelrelease`
-
-ifeq ($(BOARD_PATH),)
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-endif
-
-# Version of Linux AFTER patches
-LINUX26_DIR:=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# for packages that need it
-LINUX_VERSION:=$(LINUX26_VERSION)
-LINUX_DIR:=$(LINUX26_DIR)
-
-# -----------------------------------------------------------------------------
-# Define source name and sites
-LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_SITE:=$(call qstrip,$(BR2_KERNEL_SITE))
-
-LINUX26_PATCH_SOURCE:=$(call qstrip,$(BR2_KERNEL_PATCH))
-LINUX26_PATCH_SITE:=$(call qstrip,$(BR2_KERNEL_PATCH_SITE))
-
-LINUX26_BSP_PATCH:=$(call qstrip,$(BR2_LINUX_BSP_PATCH))
-
-ifneq ($(LINUX26_BSP_PATCH),)
-LINUX_HEADERS_DEPENDS:= $(DL_DIR)/$(LINUX26_BSP_PATCH)
-endif
-
-ifneq ($(LINUX26_PATCH_SOURCE),)
-LINUX_HEADERS_DEPENDS+=$(DL_DIR)/$(LINUX26_PATCH_SOURCE)
-endif
-
-# ------------------------------------
-# kernel patches provided by buildroot
-ifeq ($(strip $(LINUX26_PATCH_DIR)),)
-LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches/
-endif
-
-# kernel architecture patches provided by buildroot
-KERNEL_ARCH_PATCH_DIR:=$(call qstrip,$(BR2_KERNEL_ARCH_PATCH_DIR))
-
-
-
-
-# -----------------------------------------------------------------------------
-# Linux kernel configuration file
-# This is used if BR2_PACKAGE_LINUX_USE_KCONFIG is set
-# Has to be set by the target/device
-# If it is not set by the target/device, then pick the one from .config
-ifndef LINUX26_KCONFIG
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG)),)
-LINUX26_KCONFIG:=$(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG))
-else
-ifeq ($(BR2_i386),y)
-LINUX26_KCONFIG:=$(BOARD_PATH)/linux26.config
-else
-LINUX26_KCONFIG:=$(BOARD_PATH)/linux-$(LINUX26_VERSION).config
-endif
-endif
-endif
-
-KERNEL_CONFIG_METHOD:=$(call qstrip,$(BR2_KERNEL_CONFIG_METHOD))
-ifeq ($(KERNEL_CONFIG_METHOD),)
-KERNEL_CONFIG_METHOD:=menuconfig
-endif
-
-# -----------------------------------------------------------------------------
-ifndef LINUX26_FORMAT
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT)),)
-LINUX26_FORMAT:=$(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT))
-else
-ifneq ($(filter i386 x86-64,$(KERNEL_ARCH)),)
-# zImage target no longer available on x86 since 2.6.30
-LINUX26_FORMAT=bzImage
-else
-LINUX26_FORMAT:=zImage
-endif
-endif
-endif
-
-# -----------------------------------------------------------------------------
-# Has to be set by the target/device
-
-LINUX26_MKIMAGE_DEP:=
-
-# --------------
-# VMLINUX
-ifeq ($(LINUX26_FORMAT),vmlinux)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=$(LINUX26_FORMAT)
-endif
-endif
-
-# --------------
-# UIMAGE
-ifeq ($(LINUX26_FORMAT),uImage)
-LINUX26_MKIMAGE_DEP:=$(MKIMAGE)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
-endif
-endif
-
-# --------------
-# ZIMAGE
-ifeq ($(LINUX26_FORMAT),zImage)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
-endif
-endif
-
-# --------------
-# BZIMAGE
-ifeq ($(LINUX26_FORMAT),bzImage)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/bzImage
-endif
-endif
-
-# -----------------------------------------------------------------------------
-# File name for the Linux kernel binary
-LINUX26_KERNEL_NAME:=$(LINUX26_FORMAT)
-
-
-ifeq ($(BOARD_NAME),)
-BOARD_NAME=$(ARCH)
-endif
-
-ifndef LINUX26_KERNEL
-LINUX26_KERNEL:=$(BINARIES_DIR)/$(LINUX26_KERNEL_NAME)
-endif
-
-# for packages that need it
-LINUX_KERNEL:=$(LINUX26_KERNEL)
-
-
-# -----------------------------------------------------------------------------
-LINUX26_BZCAT:=$(BZCAT)
-
-LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \
- ARCH=$(KERNEL_ARCH) \
- INSTALL_MOD_PATH=$(TARGET_DIR) \
- CROSS_COMPILE=$(TARGET_CROSS) \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- LZMA="$(LZMA)" \
- PATH=$(PATH)
-
-# =============================================================================
-# ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
-
-ifneq ($(strip $(LINUX26_SOURCE)),$(strip $(LINUX_HEADERS_SOURCE)))
-$(DL_DIR)/$(LINUX26_SOURCE):
- $(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
-endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
-
-ifneq ($(strip $(LINUX26_PATCH_SOURCE)),)
-$(DL_DIR)/$(LINUX26_PATCH_SOURCE):
- $(call DOWNLOAD,$(LINUX26_PATCH_SITE),$(LINUX26_PATCH_SOURCE))
-endif
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
- rm -rf $(LINUX26_DIR)
- @echo "*** Unpacking kernel source"
- $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
- # Rename the dir from the downloaded version to the AFTER patch version
- mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
- echo $(LINUX26_VERSION_PROBED) > $(BUILD_DIR)/.linux-version
-endif
- touch $@
-
-
-# -----------------------------------------------------------------------------
-LINUX26_TARGETS+=$(LINUX26_KERNEL) $(BUILD_DIR)/.linux-version
-
-ifeq ($(BR2_LINUX_COPYTO_ROOTFS),y)
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
-endif
-
-ifeq ($(BR2_LINUX_COPYTO_TFTPBOOT),y)
-LINUX26_TARGETS+=/tftpboot/$(LINUX26_KERNEL_NAME)
-endif
-
-ifneq ($(call qstrip,$(BR2_LINUX_COPYTO)),)
-LINUX_COPYTO:=$(call qstrip,$(BR2_LINUX_COPYTO))
-LINUX26_TARGETS+=$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME)
-endif
-
-ifneq ($(BR2_LINUX_COPY_CONFIGURATION),)
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/buildroot.config
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/uclibc.config
-ifeq ($(BR2_PACKAGE_BUSYBOX),y)
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/busybox.config
-endif
-endif
-# -----------------------------------------------------------------------------
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS)
-ifneq ($(LINUX26_PATCH_SOURCE),)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_PATCH_SOURCE)
-endif
-ifneq ($(LINUX26_BSP_PATCH),)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_BSP_PATCH)
-endif
- toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \
- linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-ifeq ($(BR2_KERNEL_HEADERS_RT),y)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE)
-endif
-ifneq ($(KERNEL_HEADERS_PATCH_DIR),)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \
- linux-$(LINUX26_VERSION)\*.patch{,.gz,.bz2}
-endif
-ifeq ($(BR2_PACKAGE_OPENSWAN),y)
- toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \
- linux-$(LINUX26_VERSION)\*.patch{,.gz,.bz2}
-endif
- touch $@
-
-$(LINUX26_DIR)/.patched.arch: $(LINUX26_DIR)/.patched
-ifneq ($(BR2_KERNEL_ARCH_PATCH_DIR),)
- if [ -d $(KERNEL_ARCH_PATCH_DIR) ] ; then \
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_ARCH_PATCH_DIR) \
- linux-\*.patch{,.gz,.bz2} ; \
- fi
-endif
- touch $@
-
-$(LINUX26_DIR)/.patched.board: $(LINUX26_DIR)/.patched.arch $(KERNEL_COND_PATCHES)
-ifneq ($(LINUX26_PATCH_DIR),)
- if [ -d $(LINUX26_PATCH_DIR) ] ; then \
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) \
- linux-$(LINUX26_VERSION)\*.patch{,.gz,.bz2} ; \
- fi
-endif
- touch $@
-
-# =============================================================================
-linux_patch: $(LINUX26_DIR)/.patched.board
-
-KERNEL_EXTRA_VERSION:=$(call qstrip,$(BR2_EXTRA_VERSION))
-
-lxcf: $(LINUX26_DIR)/.config
-
-$(LINUX26_DIR)/.config: $(LINUX26_DIR)/.patched.board
-ifeq ($(BR2_PACKAGE_LINUX_USE_DEFCONFIG),y)
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig
-endif
-ifeq ($(BR2_PACKAGE_LINUX_USE_XCONFIG),y)
-ifeq ($(KERNEL_CONFIG_METHOD),xconfig)
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig || \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig \
-else
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-endif
-endif
-ifeq ($(BR2_PACKAGE_LINUX_USE_KCONFIG),y)
- # Try user defined config
- if [ -f "$(LINUX26_KCONFIG)" ] ; then \
- cp -dpf $(LINUX26_KCONFIG) $@ ; \
- fi
- # Try to get a config for this linux version in the board directory
- echo "LINUX26_VERSION = $(LINUX26_VERSION)"
- if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
- if [ -f "$(BOARD_PATH)/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config" ] ; then \
- cp -dpf $(BOARD_PATH)/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config $@ ; \
- fi ; \
- fi
- # Try to get a config for latest linux version in the board directory
- if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
- scripts/get_linux_config.sh $(BOARD_PATH) $(LINUX26_DIR) ; \
- fi
- # Use a board config defined in the linux source.
- if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig || \
- echo "$(BOARD_NAME)_defconfig failed..." ; \
- fi
- # let the user create his/her own config
- if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(KERNEL_CONFIG_METHOD) ; \
- fi
-endif
-ifneq ($(call qstrip,$(BR2_EXTRA_VERSION)),)
- $(SED) 's,^EXTRAVERSION.*,EXTRAVERSION = $(KERNEL_EXTRA_VERSION),g' $(LINUX26_DIR)/Makefile
-endif
-# $(strip $(subst ",, - ))
-
-# -----------------------------------------------------------------------------
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.config
- $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_ARM_EABI),y)
- echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
- $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
- echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
-else
- echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
-endif
- $(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_INET_IPV6),y)
- echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config
-else
- echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config
-endif
- $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
- $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
- echo "CONFIG_INITRAMFS_SOURCE=\"$(BINARIES_DIR)/rootfs.initramfs\"" >> \
- $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-else
- echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config
-endif
-ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
- # precedence for a small initramfs
- $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
- $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \
- $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
- echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-endif
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
- touch $@
-
-# -----------------------------------------------------------------------------
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured $(LINUX26_MKIMAGE_DEP)
- mkdir -p $(TARGET_DIR)/boot
- -mv $(LINUX26_DIR)/localversion* $(TARGET_DIR)/boot
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
- touch $@
-
-$(LINUX26_DIR)/$(LINUX26_BINLOC): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \
- $(LINUX26_DIR)/.depend_done
- $(MAKE) $(LINUX26_MAKE_FLAGS) \
- -C $(LINUX26_DIR) $(LINUX26_FORMAT)
- touch $@
-
-$(LINUX26_KERNEL): $(LINUX26_DIR)/$(LINUX26_BINLOC)
- cp -pf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
- touch $@
-
-# -----------------------------------------------------------------------------
-$(STAMP_DIR)/linux_modules_target_installed: $(LINUX26_DIR)/.depend_done
- rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)
- rm -f $(TARGET_DIR)/sbin/cardmgr
- # Make Linux depend on modules only if enabled in the .config.
- @if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then \
- echo "*** Installing Linux kernel modules" ; \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules; \
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
- DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
- INSTALL_MOD_PATH=$(TARGET_DIR) modules_install; \
- rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/build; \
- rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/source; \
- $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX26_VERSION_PROBED); \
- else \
- echo "*** Skipping installing modules since it is not enabled" ; \
- fi
- touch $@
-
-linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed
- [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
- -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26-xconfig: $(LINUX26_DIR)/.patched host-sed
- [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
- -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
- mkdir -p $(TARGET_DIR)/boot
- cp -dpf $(LINUX26_KERNEL) $(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
-
-$(TARGET_DIR)/boot/buildroot.config: .config
- mkdir -p $(TARGET_DIR)/boot
- cp -dpf .config $(TARGET_DIR)/boot/buildroot.config
-
-$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config: $(LINUX26_DIR)/.config
- mkdir -p $(TARGET_DIR)/boot
- cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config
-
-$(TARGET_DIR)/boot/uclibc.config: $(UCLIBC_DIR)/.config
- mkdir -p $(TARGET_DIR)/boot
- cp -dpf $(UCLIBC_DIR)/.config $(TARGET_DIR)/boot/uclibc.config
-
-$(TARGET_DIR)/boot/busybox.config: $(BUSYBOX_DIR)/.config
- mkdir -p $(TARGET_DIR)/boot
- cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
-
-/tftpboot/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
- -mkdir -p /tftpboot
- -cp -dpf $(LINUX26_KERNEL) $@
- -touch $@
-
-ifneq ($(LINUX_COPYTO),/tftpboot)
-$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
- mkdir -p $(LINUX_COPYTO)
- cp -dpf $(LINUX26_KERNEL) $@
- touch $@
-endif
-
-$(BUILD_DIR)/.linux-version: $(LINUX26_KERNEL)
- echo $(LINUX26_VERSION_PROBED) > $(BUILD_DIR)/.linux-version
- echo LINUX_MODULES=`$(LINUX26_VERSION_PROBED)`
-
-linux26: $(LINUX26_TARGETS)
-
-linux26-version: $(BUILD_DIR)/.linux-version
-
-linux26-modules: cross-depmod26 $(STAMP_DIR)/linux_modules_target_installed
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-linux26-unpacked: $(LINUX26_DIR)/.patched
-
-linux26-config: host-sed $(LINUX26_DIR)/.configured
-
-linux26-update:
- cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
-
-# force rebuild
-linux26-force:
- touch $(LINUX26_DIR)/.configured
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
- rm -f $(STAMP_DIR)/linux_modules_target_installed
- rm -f $(LINUX26_KERNEL) $(LINUX26_DIR)/.configured
- -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
- rm -rf $(LINUX26_DIR)
-
-linux26-status: linux-status
-
-# @echo =$()
-linux-status:
- @echo BOARD_NAME=$(BOARD_NAME)
- @echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
- @echo BR2_CUSTOM_LINUX26_PATCH=$(BR2_CUSTOM_LINUX26_PATCH)
- @echo BR2_CUSTOM_LINUX26_PATCH_SITE=$(BR2_CUSTOM_LINUX26_PATCH_SITE)
- @echo BR2_DOWNLOAD_LINUX26_VERSION=$(BR2_DOWNLOAD_LINUX26_VERSION)
- @echo BR2_LINUX_BSP_PATCH=$(BR2_LINUX_BSP_PATCH)
- @echo BR2_LINUX_COPYTO=$(BR2_LINUX_COPYTO)
- @echo BR2_LINUX_COPYTO_ROOTFS=$(BR2_LINUX_COPYTO_ROOTFS)
- @echo BR2_LINUX_COPYTO_TFTPBOOT=$(BR2_LINUX_COPYTO_TFTPBOOT)
- @echo BR2_LINUX_VERSION=$(BR2_LINUX_VERSION)
- @echo BR2_LINUX26_CUSTOM=$(BR2_LINUX26_CUSTOM)
- @echo BR2_LINUX26_VERSION=$(BR2_LINUX26_VERSION)
- @echo BR2_KERNEL_ADD_LATEST_RC_PATCH=$(BR2_KERNEL_ADD_LATEST_RC_PATCH)
- @echo BR2_KERNEL_ADD_LATEST_SNAPSHOT=$(BR2_KERNEL_ADD_LATEST_SNAPSHOT)
- @echo BR2_KERNEL_ADD_MINORPATCH=$(BR2_KERNEL_ADD_MINORPATCH)
- @echo BR2_KERNEL_ARCH_PATCH_DIR=$(BR2_KERNEL_ARCH_PATCH_DIR)
- @echo BR2_KERNEL_GIT_LEVEL=$(BR2_KERNEL_GIT_LEVEL)
- @echo BR2_KERNEL_MINORLEVEL=$(BR2_KERNEL_MINORLEVEL)
- @echo BR2_KERNEL_PATCH=$(BR2_KERNEL_PATCH)
- @echo BR2_KERNEL_PATCH_SITE=$(BR2_KERNEL_PATCH_SITE)
- @echo BR2_KERNEL_RC_LEVEL=$(BR2_KERNEL_RC_LEVEL)
- @echo BR2_KERNEL_SITE=$(BR2_KERNEL_SITE)
- @echo BR2_PACKAGE_LINUX_KCONFIG=$(BR2_PACKAGE_LINUX_KCONFIG)
- @echo BR2_PACKAGE_LINUX_USE_DEFCONFIG=$(BR2_PACKAGE_LINUX_USE_DEFCONFIG)
- @echo BR2_PACKAGE_LINUX_USE_KCONFIG=$(BR2_PACKAGE_LINUX_USE_KCONFIG)
- @echo BR2_PACKAGE_LINUX_USE_XCONFIG=$(BR2_PACKAGE_LINUX_USE_XCONFIG)
- @echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
- @echo KERNEL_ARCH_PATCH_DIR=$(KERNEL_ARCH_PATCH_DIR)
- @echo KERNEL_COND_PATCHES=$(KERNEL_COND_PATCHES)
- @echo KERNEL_EXT=$(KERNEL_EXT)
- @echo KERNEL_EXTRA_VERSION=$(KERNEL_EXTRA_VERSION)
- @echo KERNEL_HEADERS_PATCH_DIR=$(KERNEL_HEADERS_PATCH_DIR)
- @echo LINUX_COPYTO=$(LINUX_COPYTO)
- @echo LINUX_HEADERS_VERSION=$(LINUX_HEADERS_VERSION)
- @echo LINUX26_BINLOC=$(LINUX26_BINLOC)
- @echo LINUX26_DIR=$(LINUX26_DIR)
- @echo LINUX26_FORMAT=$(LINUX26_FORMAT)
- @echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR)
- @echo LINUX26_KERNEL=$(LINUX26_KERNEL)
- @echo LINUX26_KERNEL_NAME=$(LINUX26_KERNEL_NAME)
- @echo LINUX26_LATEST_GIT_PATCH=$(LINUX26_LATEST_GIT_PATCH)
- @echo LINUX26_LATEST_RC_PATCH=$(LINUX26_LATEST_RC_PATCH)
- @echo LINUX26_PATCH_DIR=$(LINUX26_PATCH_DIR)
- @echo LINUX26_SOURCE=$(LINUX26_SOURCE)
- @echo LINUX26_TARGETS=$(LINUX26_TARGETS)
- @echo LINUX26_VERSION=$(LINUX26_VERSION)
- @echo LINUX26_MAKE_FLAGS=$(LINUX26_MAKE_FLAGS)
- @echo BUILD_DIR=$(BUILD_DIR)
- @echo TARGETS=$(TARGETS)
-
-endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 01:50:53 +0000