27 files changed, 1 insertions, 1012 deletions
diff --git a/target/Config.in b/target/Config.in
index 5d634ca2a..5d5363538 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -1,35 +1,4 @@
-menu "Target filesystem options"
-
-config BR2_ROOTFS_POST_BUILD_SCRIPT
-	string "Custom script to run before packing files"
-	default ""
-	help
-	  Specify a script to be run after the build has finished and before
-	  the BR2 starts packing the files into selected packages.
-
-	  This gives users the oportunity to do board-specific cleanups,
-	  add-ons and the like, so the generated files can be used directly
-	  without further processing.
-
-	  The script is called with the target directory name as first and
-	  only argument. Make sure the exit code of that script is 0,
-	  otherwise make will stop after calling it.
-
-comment "filesystem for target device"
-
-source "target/cramfs/Config.in"
-source "target/cloop/Config.in"
-source "target/ext2/Config.in"
-source "target/jffs2/Config.in"
-source "target/ubifs/Config.in"
-source "target/squashfs/Config.in"
-source "target/tar/Config.in"
-source "target/cpio/Config.in"
-source "target/iso9660/Config.in"
-source "target/initramfs/Config.in"
-source "target/romfs/Config.in"
-
-comment "bootloader for target device"
+menu "Bootloaders"
 
 source "target/x86/grub/Config.in"
 #source "target/x86/grub2/Config.in"
diff --git a/target/Makefile.in b/target/Makefile.in
index 38993e5d8..48396d5d8 100644
--- a/target/Makefile.in
+++ b/target/Makefile.in
@@ -62,8 +62,6 @@ ifeq ($(BR2_TARGET_UBOOT),y)
 include target/u-boot/Makefile.in
 endif
 
-# and finally build the filesystems/tarballs
-include target/common.mk
 include target/*/*.mk
 
 # kernel rules
diff --git a/target/cloop/Config.in b/target/cloop/Config.in
deleted file mode 100644
index 3e01067a1..000000000
--- a/target/cloop/Config.in
+++ /dev/null
@@ -1,10 +0,0 @@
-config BR2_TARGET_ROOTFS_CLOOP
-	bool "cloop root filesystem for the target device"
-	help
-	  Build a cloop root filesystem
-
-	  cloop is a Linux kernel module that enables compressed
-	  loopback filesystem support. With it you can mount a
-	  compressed filesystem like a block device and seamlessly
-	  decompress its data while accessing it.  The majority of the
-	  software on an LNX-BBC is accessed in this fashion.
diff --git a/target/cloop/cloop.mk b/target/cloop/cloop.mk
deleted file mode 100644
index c1d6abb80..000000000
--- a/target/cloop/cloop.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#############################################################
-#
-# Build the compressed loop root filesystem image
-#
-#############################################################
-
-ROOTFS_CLOOP_DEPENDENCIES = host-cloop host-cdrkit
-
-define ROOTFS_CLOOP_CMD
-	$(HOST_DIR)/usr/bin/genisoimage -r $(TARGET_DIR) | $(HOST_DIR)/usr/bin/create_compressed_fs - 65536 > $$@
-endef
-
-$(eval $(call ROOTFS_TARGET,cloop))
-\ No newline at end of file
diff --git a/target/common.mk b/target/common.mk
deleted file mode 100644
index cebe8c34a..000000000
--- a/target/common.mk
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-# Macro that builds the needed Makefile target to create a root
-# filesystem image.
-#
-# The following variable must be defined before calling this macro
-#
-#  ROOTFS_$(FSTYPE)_CMD, the command that generates the root
-#  filesystem image. A single command is allowed. The filename of the
-#  filesystem image that it must generate is $$@.
-#
-# The following variables can optionaly be defined
-#
-#  ROOTFS_$(FSTYPE)_DEPENDENCIES, the list of dependencies needed to
-#  build the root filesystem (usually host tools)
-#
-#  ROOTFS_$(FSTYPE)_PRE_GEN_HOOKS, a list of hooks to call before
-#  generating the filesystem image
-#
-#  ROOTFS_$(FSTYPE)_POST_GEN_HOOKS, a list of hooks to call after
-#  generating the filesystem image
-#
-# In terms of configuration option, this macro assumes that the
-# BR2_TARGET_ROOTFS_$(FSTYPE) config option allows to enable/disable
-# the generation of a filesystem image of a particular type. If
-# configura options BR2_TARGET_ROOTFS_$(FSTYPE)_GZIP,
-# BR2_TARGET_ROOTFS_$(FSTYPE)_BZIP2 or
-# BR2_TARGET_ROOTFS_$(FSTYPE)_LZMA exist and are enabled, then the
-# macro will automatically generate a compressed filesystem image.
-
-FAKEROOT_SCRIPT = $(BUILD_DIR)/_fakeroot.fs
-
-define ROOTFS_TARGET_INTERNAL
-
-$(BINARIES_DIR)/rootfs.$(1): $(ROOTFS_$(2)_DEPENDENCIES) host-fakeroot makedevs $(if $(BR2_TARGET_ROOTFS_$(2)_LZMA),host-lzma)
-	@$(call MESSAGE,"Generating root filesystem image rootfs.$(1)")
-	$(foreach hook,$(ROOTFS_$(2)_PRE_GEN_HOOKS),$(call $(hook))$(sep))
-	rm -f $(FAKEROOT_SCRIPT)
-	touch $(BUILD_DIR)/.fakeroot.00000
-	cat $(BUILD_DIR)/.fakeroot* > $(FAKEROOT_SCRIPT)
-	echo "chown -R 0:0 $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
-ifneq ($(TARGET_DEVICE_TABLE),)
-	echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
-endif
-	echo "$(ROOTFS_$(2)_CMD)" >> $(FAKEROOT_SCRIPT)
-	chmod a+x $(FAKEROOT_SCRIPT)
-	$(HOST_DIR)/usr/bin/fakeroot -- $(FAKEROOT_SCRIPT)
-	-@rm -f $(FAKEROOT_SCRIPT)
-	$(foreach hook,$(ROOTFS_$(2)_POST_GEN_HOOKS),$(call $(hook))$(sep))
-ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
-	gzip -9 -c $$@ > $$@.gz
-endif
-ifeq ($$(BR2_TARGET_ROOTFS_$(2)_BZIP2),y)
-	bzip2 -9 -c $$@ > $$@.bz2
-endif
-ifeq ($$(BR2_TARGET_ROOTFS_$(2)_LZMA),y)
-	$(LZMA) -9 -c $$@ > $$@.lzma
-endif
-
-$(1)-root: $(BINARIES_DIR)/rootfs.$(1)
-
-ifeq ($$(BR2_TARGET_ROOTFS_$(2)),y)
-TARGETS += $(1)-root
-endif
-endef
-
-define ROOTFS_TARGET
-$(call ROOTFS_TARGET_INTERNAL,$(1),$(call UPPERCASE,$(1)))
-endef
diff --git a/target/cpio/Config.in b/target/cpio/Config.in
deleted file mode 100644
index 02fd00d34..000000000
--- a/target/cpio/Config.in
+++ /dev/null
@@ -1,40 +0,0 @@
-config BR2_TARGET_ROOTFS_CPIO
-	bool "cpio the root filesystem"
-	help
-	  Build a cpio archive of the root filesystem
-
-choice
-        prompt "Compression method"
-        default BR2_TARGET_ROOTFS_CPIO_NONE
-        depends on BR2_TARGET_ROOTFS_CPIO
-        help
-          Select compressor for cpio filesystem of the root filesystem
-
-config BR2_TARGET_ROOTFS_CPIO_NONE
-        bool "no compression"
-        help
-         Do not compress the cpio filesystem.
-
-config BR2_TARGET_ROOTFS_CPIO_GZIP
-        bool "gzip"
-        help
-         Do compress the cpio filesystem with gzip.
-         Note that you either have to have gzip installed on your host
-         or select to build a gzip for your host. See the packages submenu.
-
-config BR2_TARGET_ROOTFS_CPIO_BZIP2
-        bool "bzip2"
-        help
-         Do compress the cpio filesystem with bzip2.
-         Note that you either have to have bzip2 installed on your host
-         or select to build a bzip2 for your host. See the packages submenu.
-
-config BR2_TARGET_ROOTFS_CPIO_LZMA
-        bool "lzma"
-        help
-         Do compress the cpio filesystem with lzma.
-         Note that you either have to have lzma installed on your host
-         or select to build a lzma for your host. See the packages submenu.
-
-endchoice
-
diff --git a/target/cpio/cpioroot.mk b/target/cpio/cpioroot.mk
deleted file mode 100644
index ab7d54618..000000000
--- a/target/cpio/cpioroot.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#############################################################
-#
-# cpio to archive target filesystem
-#
-#############################################################
-
-define ROOTFS_CPIO_INIT_SYMLINK
-	rm -f $(TARGET_DIR)/init
-	ln -s sbin/init $(TARGET_DIR)/init
-endef
-
-ROOTFS_CPIO_PRE_GEN_HOOKS += ROOTFS_CPIO_INIT_SYMLINK
-
-define ROOTFS_CPIO_CMD
-	cd $(TARGET_DIR) && find . | cpio --quiet -o -H newc > $$@
-endef
-
-$(eval $(call ROOTFS_TARGET,cpio))
-\ No newline at end of file
diff --git a/target/cramfs/Config.in b/target/cramfs/Config.in
deleted file mode 100644
index 1a4e32647..000000000
--- a/target/cramfs/Config.in
+++ /dev/null
@@ -1,6 +0,0 @@
-config BR2_TARGET_ROOTFS_CRAMFS
-	bool "cramfs root filesystem"
-	help
-	  Build a cramfs root filesystem
-
-	  http://sourceforge.net/projects/cramfs/
diff --git a/target/cramfs/cramfs.mk b/target/cramfs/cramfs.mk
deleted file mode 100644
index ccd316f5d..000000000
--- a/target/cramfs/cramfs.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#############################################################
-#
-# Build the cramfs root filesystem image
-#
-#############################################################
-ifeq ($(BR2_ENDIAN),"BIG")
-CRAMFS_OPTS=-b
-else
-CRAMFS_OPTS=-l
-endif
-
-ifneq ($(TARGET_DEVICE_TABLE),)
-CRAMFS_OPTS += -D $(TARGET_DEVICE_TABLE)
-endif
-
-define ROOTFS_CRAMFS_CMD
- $(HOST_DIR)/usr/bin/mkcramfs -q $(CRAMFS_OPTS) $(TARGET_DIR) $$@
-endef
-
-ROOTFS_CRAMFS_DEPENDENCIES = host-cramfs
-
-$(eval $(call ROOTFS_TARGET,cramfs))
-\ No newline at end of file
diff --git a/target/ext2/Config.in b/target/ext2/Config.in
deleted file mode 100644
index 02ec18f40..000000000
--- a/target/ext2/Config.in
+++ /dev/null
@@ -1,61 +0,0 @@
-config BR2_TARGET_ROOTFS_EXT2
-	bool "ext2 root filesystem"
-	default y
-	help
-	  Build an ext2 root filesystem
-
-config BR2_TARGET_ROOTFS_EXT2_BLOCKS
-	int "size in blocks (leave at 0 for auto calculation)"
-	depends on BR2_TARGET_ROOTFS_EXT2
-	default 0
-
-config BR2_TARGET_ROOTFS_EXT2_INODES
-	int "inodes (leave at 0 for auto calculation)"
-	depends on BR2_TARGET_ROOTFS_EXT2
-	default 0
-
-config BR2_TARGET_ROOTFS_EXT2_RESBLKS
-	int "reserved blocks percentage"
-	depends on BR2_TARGET_ROOTFS_EXT2
-	default 0
-
-config BR2_TARGET_ROOTFS_EXT2_SQUASH
-	bool "Make all files be owned by root"
-	depends on  BR2_TARGET_ROOTFS_EXT2
-	default y
-
-choice
-	prompt "Compression method"
-	default BR2_TARGET_ROOTFS_EXT2_NONE
-	depends on BR2_TARGET_ROOTFS_EXT2
-	help
-	  Select compressor for ext2 filesystem of the root filesystem
-
-config BR2_TARGET_ROOTFS_EXT2_NONE
-	bool "no compression"
-	help
-	  Do not compress the ext2 filesystem.
-
-config BR2_TARGET_ROOTFS_EXT2_GZIP
-	bool "gzip"
-	help
-	  Do compress the ext2 filesystem with gzip.
-	  Note that you either have to have gzip installed on your host
-	  or select to build a gzip for your host. See the packages submenu.
-
-config BR2_TARGET_ROOTFS_EXT2_BZIP2
-	bool "bzip2"
-	help
-	  Do compress the ext2 filesystem with bzip2.
-	  Note that you either have to have bzip2 installed on your host
-	  or select to build a bzip2 for your host. See the packages submenu.
-
-config BR2_TARGET_ROOTFS_EXT2_LZMA
-	bool "lzma"
-	help
-	  Do compress the ext2 filesystem with lzma.
-	  Note that you either have to have lzma installed on your host
-	  or select to build a lzma for your host. See the packages submenu.
-
-endchoice
-
diff --git a/target/ext2/ext2root.mk b/target/ext2/ext2root.mk
deleted file mode 100644
index 68b3b813c..000000000
--- a/target/ext2/ext2root.mk
+++ /dev/null
@@ -1,40 +0,0 @@
-#############################################################
-#
-# Build the ext2 root filesystem image
-#
-#############################################################
-
-EXT2_OPTS :=
-
-ifeq ($(BR2_TARGET_ROOTFS_EXT2_SQUASH),y)
-EXT2_OPTS += -U
-endif
-
-ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
-EXT2_OPTS += -b $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)
-endif
-
-ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_INODES)),0)
-EXT2_OPTS += -N $(BR2_TARGET_ROOTFS_EXT2_INODES)
-endif
-
-ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)),)
-EXT2_OPTS += -m $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)
-endif
-
-ROOTFS_EXT2_DEPENDENCIES = host-genext2fs
-
-ifeq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
-GENEXT2_REALSIZE=$(shell LC_ALL=C du -s -c -k $(TARGET_DIR) | grep total | sed -e "s/total//")
-GENEXT2_ADDTOROOTSIZE=$(shell if [ $(GENEXT2_REALSIZE) -ge 20000 ]; then echo 16384; else echo 2400; fi)
-GENEXT2_SIZE=$(shell expr $(GENEXT2_REALSIZE) + $(GENEXT2_ADDTOROOTSIZE))
-GENEXT2_ADDTOINODESIZE=$(shell find $(TARGET_DIR) | wc -l)
-GENEXT2_INODES=$(shell expr $(GENEXT2_ADDTOINODESIZE) + 400)
-EXT2_OPTS += -b $(GENEXT2_SIZE) -N $(GENEXT2_INODES)
-endif
-
-define ROOTFS_EXT2_CMD
-	$(HOST_DIR)/usr/bin/genext2fs -d $(TARGET_DIR) $(EXT2_OPTS) $$@
-endef
-
-$(eval $(call ROOTFS_TARGET,ext2))
-\ No newline at end of file
diff --git a/target/initramfs/Config.in b/target/initramfs/Config.in
deleted file mode 100644
index d53982cb9..000000000
--- a/target/initramfs/Config.in
+++ /dev/null
@@ -1,15 +0,0 @@
-config BR2_TARGET_ROOTFS_INITRAMFS
-	bool "initramfs for initial ramdisk of linux kernel"
-	help
-	  Build a file which is usable for the gen_init_cpio tool
-	  at linux kernel build.
-	  This file is normally called initramfs_list and can be
-	  generated with gen_initramfs_list.sh script from the root
-	  directory structure.
-	  The file is then used in the kernel build process to generate
-	  the cpio filesystem for the initial ramdisk. Make sure that
-	  you configure this file in kernel build configuration.
-	  The location in the kernel build configuration menu is
-	  Device Drivers -> Block devices -> Initramfs source file(s).
-	  The configuration variable is CONFIG_INITRAMFS_SOURCE
-
diff --git a/target/initramfs/gen_initramfs_list.sh b/target/initramfs/gen_initramfs_list.sh
deleted file mode 100644
index 26252b619..000000000
--- a/target/initramfs/gen_initramfs_list.sh
+++ /dev/null
@@ -1,203 +0,0 @@
-#!/bin/sh
-# Copyright (C) Martin Schlemmer <azarah@nosferatu.za.org>
-# Released under the terms of the GNU GPL
-#
-# Generate a newline separated list of entries from the file/directory
-# supplied as an argument.
-#
-# If a file/directory is not supplied then generate a small dummy file.
-#
-# The output is suitable for gen_init_cpio built from usr/gen_init_cpio.c.
-#
-
-default_initramfs() {
-	cat <<-EOF
-		# This is a very simple, default initramfs
-
-		dir /dev 0755 0 0
-		nod /dev/console 0600 0 0 c 5 1
-		dir /root 0700 0 0
-	EOF
-}
-
-filetype() {
-	local argv1="$1"
-
-	# symlink test must come before file test
-	if [ -L "$argv1" ]; then
-		echo "slink"
-	elif [ -f "$argv1" ]; then
-		echo "file"
-	elif [ -d "$argv1" ]; then
-		echo "dir"
-	elif [ -b "$argv1" -o -c "$argv1" ]; then
-		echo "nod"
-	elif [ -p "$argv1" ]; then
-		echo "pipe"
-	elif [ -S "$argv1" ]; then
-		echo "sock"
-	else
-		echo "invalid"
-	fi
-	return 0
-}
-
-print_mtime() {
-	local argv1="$1"
-	local mymtime="0"
-
-	if [ -e "$argv1" ]; then
-		mymtime=$(find "$argv1" -printf "%T@\n" | sort -r | head -n 1)
-	fi
-	
-	echo "# Last modified: $mymtime"
-	echo
-}
-
-parse() {
-	local location="$1"
-	local name=$(echo "$location" | sed -e "s,$srcdir,,")
-	# change '//' into '/'
-	name=$(echo $name | sed -e 's,/[/]*,/,g')
-	local mode="$2"
-	local uid="$3"
-	local gid="$4"
-	local ftype=$(filetype "$location")
-	# remap uid/gid to 0 if necessary
-	[ "x$uid" != "x" ] && [ $uid -eq $root_uid ] && uid=0
-	[ "x$gid" != "x" ] && [ $gid -eq $root_gid ] && gid=0
-	local str="$mode $uid $gid"
-
-	[ "$ftype" = "invalid" ] && return 0
-	[ "$location" = "$srcdir" ] && return 0
-
-	case "$ftype" in
-		"file")
-			str="$ftype $name $location $str"
-			;;
-		"nod")
-			local devtype=
-			local maj=$(LC_ALL=C ls -l "$location" | \
-					awk '{sub(/,/, "", $5); print $5}')
-			local min=$(LC_ALL=C ls -l "$location" | \
-					awk '{print $6}')
-
-			if [ -b "$location" ]; then
-				devtype="b"
-			else
-				devtype="c"
-			fi
-			str="$ftype $name $str $devtype $maj $min"
-			;;
-		"slink")
-			local target=$(LC_ALL=C ls -l "$location" | \
-					awk '{print $11}')
-			str="$ftype $name $target $str"
-			;;
-		*)
-			str="$ftype $name $str"
-			;;
-	esac
-
-	echo "$str"
-
-	return 0
-}
-
-usage() {
-	printf    "Usage:\n"
-	printf    "$0 [ [-u <root_uid>] [-g <root_gid>] [-d | <cpio_source>] ] . . .\n"
-	printf    "\n"
-	printf -- "-u <root_uid>  User ID to map to user ID 0 (root).\n"
-	printf    "               <root_uid> is only meaningful if <cpio_source>\n"
-	printf    "               is a directory.\n"
-	printf -- "-g <root_gid>  Group ID to map to group ID 0 (root).\n"
-	printf    "               <root_gid> is only meaningful if <cpio_source>\n"
-	printf    "               is a directory.\n"
-	printf    "<cpio_source>  File list or directory for cpio archive.\n"
-	printf    "               If <cpio_source> is not provided then a\n"
-	printf    "               a default list will be output.\n"
-	printf -- "-d             Output the default cpio list.  If no <cpio_source>\n"
-	printf    "               is given then the default cpio list will be output.\n"
-	printf    "\n"
-	printf    "All options may be repeated and are interpreted sequentially\n"
-	printf    "and immediately.  -u and -g states are preserved across\n"
-	printf    "<cpio_source> options so an explicit \"-u 0 -g 0\" is required\n"
-	printf    "to reset the root/group mapping.\n"
-}
-
-build_list() {
-	printf "\n#####################\n# $cpio_source\n"
-
-	if [ -f "$cpio_source" ]; then
-		print_mtime "$cpio_source"
-		cat "$cpio_source"
-	elif [ -d "$cpio_source" ]; then
-		srcdir=$(echo "$cpio_source" | sed -e 's://*:/:g;s:/$::')
-		dirlist=$(find "$srcdir" -printf "%p %m %U %G\n" 2>/dev/null)
-
-		# If $dirlist is only one line, then the directory is empty
-		if [  "$(echo "$dirlist" | wc -l)" -gt 1 ]; then
-			print_mtime "$cpio_source"
-		
-			echo "$dirlist" | \
-			while read x; do
-				parse $x
-			done
-		else
-			# Failsafe in case directory is empty
-			default_initramfs
-		fi
-	else
-		echo "  $0: Cannot open '$cpio_source'" >&2
-		exit 1
-	fi
-}
-
-
-root_uid=0
-root_gid=0
-
-while [ $# -gt 0 ]; do
-	arg="$1"
-	shift
-	case "$arg" in
-		"-u")
-			root_uid="$1"
-			shift
-			;;
-		"-g")
-			root_gid="$1"
-			shift
-			;;
-		"-d")
-			default_list="$arg"
-			default_initramfs
-			;;
-		"-h")
-			usage
-			exit 0
-			;;
-		*)
-			case "$arg" in
-				"-"*)
-					printf "ERROR: unknown option \"$arg\"\n" >&2
-					printf "If the filename validly begins with '-', then it must be prefixed\n" >&2
-					printf "by './' so that it won't be interpreted as an option." >&2
-					printf "\n" >&2
-					usage >&2
-					exit 1
-					;;
-				*)
-					cpio_source="$arg"
-					build_list
-					;;
-			esac
-			;;
-	esac
-done
-
-# spit out the default cpio list if a source hasn't been specified
-[ -z "$cpio_source" -a -z "$default_list" ] && default_initramfs
-
-exit 0
diff --git a/target/initramfs/initramfs.mk b/target/initramfs/initramfs.mk
deleted file mode 100644
index cf1fcdbae..000000000
--- a/target/initramfs/initramfs.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#############################################################
-#
-# Make a initramfs_list file to be used by gen_init_cpio
-# gen_init_cpio is part of the 2.6 linux kernels to build an
-# initial ramdisk filesystem based on cpio
-#
-#############################################################
-
-define ROOTFS_INITRAMFS_INIT_SYMLINK
-	rm -f $(TARGET_DIR)/init
-	ln -s sbin/init $(TARGET_DIR)/init
-endef
-
-define ROOTFS_INITRAMFS_CMD
-	$(SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(TARGET_DIR) > $$@
-endef
-
-$(eval $(call ROOTFS_TARGET,initramfs))
-\ No newline at end of file
diff --git a/target/iso9660/Config.in b/target/iso9660/Config.in
deleted file mode 100644
index ceee52ff9..000000000
--- a/target/iso9660/Config.in
+++ /dev/null
@@ -1,16 +0,0 @@
-config BR2_TARGET_ROOTFS_ISO9660
-	bool "iso image"
-	depends on BR2_i386
-	depends on !BR2_KERNEL_none
-	select BR2_TARGET_ROOTFS_EXT2
-	select BR2_TARGET_GRUB
-	help
-	  Build a bootable iso9660 image
-
-config BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU
-	string "Boot menu.lst file"
-	depends on BR2_TARGET_ROOTFS_ISO9660
-	default "target/iso9660/menu.lst"
-
-comment "iso image requires a Linux kernel to be built"
-	depends on BR2_i386 && BR2_KERNEL_none
diff --git a/target/iso9660/iso9660.mk b/target/iso9660/iso9660.mk
deleted file mode 100644
index 66e2de20b..000000000
--- a/target/iso9660/iso9660.mk
+++ /dev/null
@@ -1,49 +0,0 @@
-#############################################################
-#
-# Build the iso96600 root filesystem image
-#
-# Cannot be converted to the ROOTFS_TARGET infrastructure, because of
-# the temporary construction in ISO9660_TARGET_DIR.
-#
-#############################################################
-
-ISO9660_TARGET_DIR=$(BUILD_DIR)/iso9660
-ISO9660_BOOT_MENU:=$(call qstrip,$(BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU))
-ISO9660_OPTS:=
-
-ifeq ($(BR2_TARGET_ROOTFS_ISO9660_SQUASH),y)
-ISO9660_OPTS+=-U
-endif
-
-$(BINARIES_DIR)/rootfs.iso9660: host-cdrkit host-fakeroot $(LINUX_KERNEL) $(BINARIES_DIR)/rootfs.ext2 grub
-	@$(call MESSAGE,"Generating root filesystem image rootfs.iso9660")
-	mkdir -p $(ISO9660_TARGET_DIR)
-	mkdir -p $(ISO9660_TARGET_DIR)/boot/grub
-	cp $(GRUB_DIR)/stage2/stage2_eltorito $(ISO9660_TARGET_DIR)/boot/grub/
-	cp $(ISO9660_BOOT_MENU) $(ISO9660_TARGET_DIR)/boot/grub/menu.lst
-	cp $(LINUX_KERNEL) $(ISO9660_TARGET_DIR)/kernel
-	cp $(EXT2_TARGET) $(ISO9660_TARGET_DIR)/initrd
-	# Use fakeroot to pretend all target binaries are owned by root
-	rm -f $(FAKEROOT_SCRIPT)
-	touch $(BUILD_DIR)/.fakeroot.00000
-	cat $(BUILD_DIR)/.fakeroot* > $(FAKEROOT_SCRIPT)
-	echo "chown -R 0:0 $(ISO9660_TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
-	# Use fakeroot so mkisofs believes the previous fakery
-	echo "$(HOST_DIR)/usr/bin/genisoimage -R -b boot/grub/stage2_eltorito -no-emul-boot " \
-		"-boot-load-size 4 -boot-info-table -o $@ $(ISO9660_TARGET_DIR)" \
-		>> $(FAKEROOT_SCRIPT)
-	chmod a+x $(FAKEROOT_SCRIPT)
-	$(HOST_DIR)/usr/bin/fakeroot -- $(FAKEROOT_SCRIPT)
-	-@rm -f $(FAKEROOT_SCRIPT)
-	-@rm -rf $(ISO9660_TARGET_DIR)
-
-iso9660-root: $(BINARIES_DIR)/rootfs.iso9660
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_ROOTFS_ISO9660),y)
-TARGETS+=iso9660-root
-endif
diff --git a/target/iso9660/menu.lst b/target/iso9660/menu.lst
deleted file mode 100644
index d78caebe1..000000000
--- a/target/iso9660/menu.lst
+++ /dev/null
@@ -1,11 +0,0 @@
-default		0
-timeout		10
-color cyan/blue white/blue
-
-title		Hard Drive (first partition)
-rootnoverify	(hd0)
-chainloader	+1
-
-title		BuildRoot ISO9660 image
-kernel		/kernel
-initrd		/initrd
diff --git a/target/jffs2/Config.in b/target/jffs2/Config.in
deleted file mode 100644
index b787ec9d1..000000000
--- a/target/jffs2/Config.in
+++ /dev/null
@@ -1,117 +0,0 @@
-config BR2_TARGET_ROOTFS_JFFS2
-	bool "jffs2 root filesystem"
-	help
-	  Build a jffs2 root filesystem
-
-if BR2_TARGET_ROOTFS_JFFS2
-
-choice
-	prompt "Flash Type"
-	default BR2_TARGET_ROOTFS_JFFS2_FLASH_128
-
-config BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
-	bool "AT45 dataflash with 1056 byte pagesize"
-	select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-
-config BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
-	bool "AT45 dataflash with 528 byte pagesize"
-	select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-
-config BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
-	bool "NAND flash with 512B Page and 16 kB erasesize"
-	select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-
-config BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
-	bool "NAND flash with 2kB Page and 128 kB erasesize"
-	select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-
-config BR2_TARGET_ROOTFS_JFFS2_FLASH_128
-	bool "Parallel flash with 4 kB pagesize and 128 kB erase size"
-
-config BR2_TARGET_ROOTFS_JFFS2_FLASH_64
-	bool "Parallel flash with 4 kB pagesize and 64 kB erase size"
-
-config BR2_TARGET_ROOTFS_JFFS2_CUSTOM
-	bool "Select custom page and erase size"
-
-endchoice
-
-config BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE
-	hex "Page Size"
-	depends on BR2_TARGET_ROOTFS_JFFS2_CUSTOM
-	default 0x1000
-	help
-	  Set to pagesize of memory
-
-config BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE
-	hex "Erase block size"
-	depends on BR2_TARGET_ROOTFS_JFFS2_CUSTOM
-	default 0x20000
-	help
-	  Set to erase size of memory
-
-config BR2_TARGET_ROOTFS_JFFS2_PAGESIZE
-	hex
-	default 0x420 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
-	default 0x210 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
-	default 0x200 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
-	default 0x800 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
-	default 0x1000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_128
-	default 0x1000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_64
-	default $(BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE) if BR2_TARGET_ROOTFS_JFFS2_CUSTOM
-
-config BR2_TARGET_ROOTFS_JFFS2_EBSIZE
-	hex
-	default 0x2100 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
-	default 0x1080 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
-	default 0x4000 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
-	default 0x20000 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
-	default 0x20000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_128
-	default 0x10000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_64
-	default $(BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE) if BR2_TARGET_ROOTFS_JFFS2_CUSTOM
-
-config BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-	bool "Do not use Cleanmarker"
-	default y if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
-	default y if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
-	default y if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
-	default y if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
-	help
-	  Do not use cleanmarkers if using NAND flash or Dataflash where
-	  the pagesize is not a power of 2
-
-config BR2_JFFS2_TARGET_SREC
-	bool "RootFS in SREC file formet"
-
-config BR2_TARGET_ROOTFS_JFFS2_PAD
-	bool "Pad output"
-
-config BR2_TARGET_ROOTFS_JFFS2_PADSIZE
-	hex "Pad output size (0x0 = to end of EB)"
-	depends on BR2_TARGET_ROOTFS_JFFS2_PAD
-	default 0x0
-	help
-	  Set to 0x0 to pad to end of erase block.
-
-choice
-	prompt "Endianess"
-	default BR2_TARGET_ROOTFS_JFFS2_BE if BR2_alpha || BR2_armeb || \
-			BR2_avr32 || BR2_m68k || BR2_mips || \
-			BR2_powerpc || BR2_sh2a_nofpueb || BR2_sh2eb || \
-			BR2_sh3eb || BR2_sh4eb || BR2_sparc || BR2_sparc64
-
-config BR2_TARGET_ROOTFS_JFFS2_LE
-	bool "little-endian"
-
-config BR2_TARGET_ROOTFS_JFFS2_BE
-	bool "big-endian"
-
-endchoice
-
-config BR2_TARGET_ROOTFS_JFFS2_SUMMARY
-	bool "Produce a summarized JFFS2 image"
-	help
-	  A summarised image can be mounted faster if support is
-	  enabled in the kernel (CONFIG_JFFS2_SUMMARY)
-
-endif
diff --git a/target/jffs2/jffs2root.mk b/target/jffs2/jffs2root.mk
deleted file mode 100644
index a0a563d18..000000000
--- a/target/jffs2/jffs2root.mk
+++ /dev/null
@@ -1,61 +0,0 @@
-#############################################################
-#
-# Build the jffs2 root filesystem image
-#
-#############################################################
-
-JFFS2_OPTS := -e $(BR2_TARGET_ROOTFS_JFFS2_EBSIZE)
-SUMTOOL_OPTS := $(JFFS2_OPTS)
-
-ifeq ($(BR2_TARGET_ROOTFS_JFFS2_PAD),y)
-ifneq ($(strip $(BR2_TARGET_ROOTFS_JFFS2_PADSIZE)),0x0)
-JFFS2_OPTS += --pad=$(strip $(BR2_TARGET_ROOTFS_JFFS2_PADSIZE))
-else
-JFFS2_OPTS += -p
-endif
-SUMTOOL_OPTS += -p
-endif
-
-ifeq ($(BR2_TARGET_ROOTFS_JFFS2_LE),y)
-JFFS2_OPTS += -l
-SUMTOOL_OPTS += -l
-endif
-
-ifeq ($(BR2_TARGET_ROOTFS_JFFS2_BE),y)
-JFFS2_OPTS += -b
-SUMTOOL_OPTS += -b
-endif
-
-JFFS2_OPTS += -s $(BR2_TARGET_ROOTFS_JFFS2_PAGESIZE)
-ifeq ($(BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER),y)
-JFFS2_OPTS += -n
-SUMTOOL_OPTS += -n
-endif
-
-ifneq ($(TARGET_DEVICE_TABLE),)
-JFFS2_OPTS += -D $(TARGET_DEVICE_TABLE)
-endif
-
-ROOTFS_JFFS2_DEPENDENCIES = host-mtd
-
-ifneq ($(BR2_TARGET_ROOTFS_JFFS2_SUMMARY),)
-define ROOTFS_JFFS2_CMD
-	$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $$@.nosummary && \
-	$(SUMTOOL) $(SUMTOOL_OPTS) -i $$@.nosummary -o $$@ && \
-	rm $$@.nosummary
-endef
-else
-define ROOTFS_JFFS2_CMD
-	$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $$@
-endef
-endif
-
-define JFFS2_GEN_SREC
-	$(TARGET_CROSS)objcopy -I binary -O srec --adjust-vma 0xa1000000 $$@ $$@.srec
-endef
-
-ifeq ($(BR2_JFFS2_TARGET_SREC),y)
-ROOTFS_JFFS2_POST_GEN_HOOKS += JFFS2_GEN_SREC
-endif
-
-$(eval $(call ROOTFS_TARGET,jffs2))
-\ No newline at end of file
diff --git a/target/romfs/Config.in b/target/romfs/Config.in
deleted file mode 100644
index 7a8c663dd..000000000
--- a/target/romfs/Config.in
+++ /dev/null
@@ -1,5 +0,0 @@
-config BR2_TARGET_ROOTFS_ROMFS
-	bool "romfs root filesystem"
-	help
-	  Build a romfs image of the root filesystem.
-
diff --git a/target/romfs/romfs.mk b/target/romfs/romfs.mk
deleted file mode 100644
index 971947880..000000000
--- a/target/romfs/romfs.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#############################################################
-#
-# Build the romfs root filesystem image
-#
-#############################################################
-
-ROMFS_TARGET=$(IMAGE).romfs
-
-ROOTFS_ROMFS_DEPENDENCIES = host-genromfs
-
-define ROOTFS_ROMFS_CMD
-	$(HOST_DIR)/usr/bin/genromfs -d $(TARGET_DIR) -f $$@
-endef
-
-$(eval $(call ROOTFS_TARGET,romfs))
-\ No newline at end of file
diff --git a/target/squashfs/Config.in b/target/squashfs/Config.in
deleted file mode 100644
index 6cc8fcae0..000000000
--- a/target/squashfs/Config.in
+++ /dev/null
@@ -1,4 +0,0 @@
-config BR2_TARGET_ROOTFS_SQUASHFS
-	bool "squashfs root filesystem"
-	help
-	  Build a squashfs root filesystem
diff --git a/target/squashfs/squashfsroot.mk b/target/squashfs/squashfsroot.mk
deleted file mode 100644
index d72388ebf..000000000
--- a/target/squashfs/squashfsroot.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#############################################################
-#
-# Build the squashfs root filesystem image
-#
-#############################################################
-
-ROOTFS_SQUASHFS_DEPENDENCIES = host-squashfs
-
-define ROOTFS_SQUASHFS_CMD
-	$(HOST_DIR)/usr/bin/mksquashfs $(TARGET_DIR) $$@ -noappend
-endef
-
-$(eval $(call ROOTFS_TARGET,squashfs))
-\ No newline at end of file
diff --git a/target/tar/Config.in b/target/tar/Config.in
deleted file mode 100644
index 0adca795f..000000000
--- a/target/tar/Config.in
+++ /dev/null
@@ -1,47 +0,0 @@
-config BR2_TARGET_ROOTFS_TAR
-	bool "tar the root filesystem"
-	help
-	  Build a tar archive of the root filesystem
-
-choice
-	prompt "Compression method"
-	default BR2_TARGET_ROOTFS_TAR_NONE
-	depends on BR2_TARGET_ROOTFS_TAR
-	help
-	  Select compressor for tar archive of the root filesystem
-
-config BR2_TARGET_ROOTFS_TAR_NONE
-	bool "no compression"
-	help
-	 Do not compress the tarball.
-
-config BR2_TARGET_ROOTFS_TAR_GZIP
-	bool "gzip"
-	help
-	 Do compress the tarball with gzip.
-	 Note that you either have to have gzip installed on your host
-	 or select to build a gzip for your host. See the packages submenu.
-
-config BR2_TARGET_ROOTFS_TAR_BZIP2
-	bool "bzip2"
-	help
-	 Do compress the tarball with bzip2.
-	 Note that you either have to have bzip2 installed on your host
-	 or select to build a bzip2 for your host. See the packages submenu.
-
-config BR2_TARGET_ROOTFS_TAR_LZMA
-	bool "lzma"
-	help
-	 Do compress the tarball with lzma.
-	 Note that you either have to have lzma installed on your host
-	 or select to build a lzma for your host. See the packages submenu.
-
-endchoice
-
-config BR2_TARGET_ROOTFS_TAR_OPTIONS
-	string "other random options to pass to tar"
-	depends on BR2_TARGET_ROOTFS_TAR
-	default ""
-	help
-	  Any other flags you want to pass to tar
-	  Refer to tar --help for details
diff --git a/target/tar/tarroot.mk b/target/tar/tarroot.mk
deleted file mode 100644
index 4d435cb33..000000000
--- a/target/tar/tarroot.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#############################################################
-#
-# tar to archive target filesystem
-#
-#############################################################
-
-TAR_OPTS:=$(BR2_TARGET_ROOTFS_TAR_OPTIONS)
-
-define ROOTFS_TAR_CMD
- tar -c$(TAR_OPTS)f $$@ -C $(TARGET_DIR) .
-endef
-
-$(eval $(call ROOTFS_TARGET,tar))
diff --git a/target/ubifs/Config.in b/target/ubifs/Config.in
deleted file mode 100644
index 9fa510e75..000000000
--- a/target/ubifs/Config.in
+++ /dev/null
@@ -1,88 +0,0 @@
-config BR2_TARGET_ROOTFS_UBIFS
-	bool "ubifs root filesystem"
-	help
-	  Build a ubifs root filesystem
-
-config BR2_TARGET_ROOTFS_UBIFS_LEBSIZE
-	hex "UBI logical erase block size"
-	depends on BR2_TARGET_ROOTFS_UBIFS
-	default 0x1f800
-
-config BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE
-	hex "UBI minimum I/O size"
-	depends on BR2_TARGET_ROOTFS_UBIFS
-	default 0x800
-	help
-	  Some comment required here
-
-config BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT
-	int "Maximum LEB count"
-	depends on BR2_TARGET_ROOTFS_UBIFS
-	default 2048
-	help
-	  Some comment required here
-
-choice
-	prompt "ubifs runtime compression"
-	default BR2_TARGET_ROOTFS_UBIFS_RT_LZO
-	depends on BR2_TARGET_ROOTFS_UBIFS
-	help
-	  Select which compression format to use at run-time within
-	  the ubifs file system.
-
-config BR2_TARGET_ROOTFS_UBIFS_RT_NONE
-	bool "no compression"
-	help
-	  Don't use run-time compression.
-
-config BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB
-	bool "gzip"
-	help
-	  Use zlib compression at run-time.
-
-config BR2_TARGET_ROOTFS_UBIFS_RT_LZO
-	bool "lzo"
-	help
-	  Use lzo compression at run-time.
-
-endchoice
-
-choice
-	prompt "Compression method"
-	default BR2_TARGET_ROOTFS_UBIFS_NONE
-	depends on BR2_TARGET_ROOTFS_UBIFS
-	help
-	  Select which compression format to compress the final image
-	  into.
-
-config BR2_TARGET_ROOTFS_UBIFS_NONE
-	bool "no compression"
-	help
-	  Do not compress the ubifs filesystem.
-
-config BR2_TARGET_ROOTFS_UBIFS_GZIP
-	bool "gzip"
-	help
-	  Do compress the ubifs filesystem with gzip.
-	  Note that you either have to have gzip installed on your
-	  host or select to build a gzip for your host. See the
-	  packages submenu.
-
-config BR2_TARGET_ROOTFS_UBIFS_BZIP2
-	bool "bzip2"
-	help
-	  Do compress the ubifs filesystem with bzip2.
-	  Note that you either have to have bzip2 installed on your
-	  host or select to build a bzip2 for your host. See the
-	  packages submenu.
-
-config BR2_TARGET_ROOTFS_UBIFS_LZMA
-	bool "lzma"
-	help
-	  Do compress the ubifs filesystem with lzma.
-	  Note that you either have to have lzma installed on your
-	  host or select to build a lzma for your host. See the
-	  packages submenu.
-
-endchoice
-
diff --git a/target/ubifs/ubifsroot.mk b/target/ubifs/ubifsroot.mk
deleted file mode 100644
index 0fad23421..000000000
--- a/target/ubifs/ubifsroot.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#############################################################
-#
-# Build the ubifs root filesystem image
-#
-#############################################################
-
-UBIFS_OPTS := -e $(BR2_TARGET_ROOTFS_UBIFS_LEBSIZE) -c $(BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT) -m $(BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE)
-
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB),y)
-UBIFS_OPTS += -x zlib
-endif
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS_RT_LZI),y)
-UBIFS_OPTS += -x lzo
-endif
-ifeq ($(BR2_TARGET_ROOTFS_UBIFS_RT_NONE),y)
-UBIFS_OPTS += -x none
-endif
-
-ROOTFS_UBIFS_DEPENDENCIES = host-mtd
-
-define ROOTFS_UBIFS_CMD
-	$(HOST_DIR)/usr/sbin/mkfs.ubifs -d $(TARGET_DIR) $(UBIFS_OPTS) -o $$@
-endef
-
-$(eval $(call ROOTFS_TARGET,ubifs))
-\ No newline at end of file