diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/u-boot/Config.in | 238 |
1 files changed, 186 insertions, 52 deletions
diff --git a/target/u-boot/Config.in b/target/u-boot/Config.in index a91820cf8..7899806e7 100644 --- a/target/u-boot/Config.in +++ b/target/u-boot/Config.in @@ -11,6 +11,14 @@ menuconfig BR2_TARGET_UBOOT Build "Das U-Boot" Boot Monitor if BR2_TARGET_UBOOT +config BR2_TARGET_UBOOT_BOARDNAME + string "board name" + depends on BR2_TARGET_UBOOT + default "$(BOARD_NAME)" + help + One of U-Boot supported boards to be built. + This will be suffixed with _config to meet U-Boot standard naming. + choice prompt "U-Boot Version" default BR2_TARGET_UBOOT_2009_01_RC1 @@ -20,27 +28,18 @@ choice config BR2_TARGET_UBOOT_2009_01_RC1 bool "u-boot-2009.01-rc1" depends on BR2_TARGET_UBOOT - help - Use u-boot from December 2008 (RC1) config BR2_TARGET_UBOOT_2008_10 bool "u-boot-2008.10" depends on BR2_TARGET_UBOOT - help - Use u-boot from October 2008 config BR2_TARGET_UBOOT_1_3_4 bool "u-boot-1.3.4" depends on BR2_TARGET_UBOOT - help - Use u-boot from mid 2008 config BR2_TARGET_UBOOT_2009_01 bool "u-boot-2009.01" depends on BR2_TARGET_UBOOT - help - Use u-boot from January 2009 - Release date 2009-01-17 endchoice @@ -51,14 +50,6 @@ config BR2_UBOOT_VERSION default "1.3.4" if BR2_TARGET_UBOOT_1_3_4 default "2009.01" if BR2_TARGET_UBOOT_2009_01 -config BR2_TARGET_UBOOT_BOARDNAME - string "board name" - depends on BR2_TARGET_UBOOT - default "$(BOARD_NAME)" - help - One of U-Boot supported boards to be built. - This will be suffixed with _config to meet U-Boot standard naming. - config BR2_TARGET_UBOOT_CUSTOM_PATCH string "custom patch" depends on BR2_TARGET_UBOOT @@ -74,41 +65,26 @@ choice config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD bool "Boot from dataflashcard" depends on BR2_BOOTSOURCE_DATAFLASHCARD - help - config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH bool "Boot from dataflash depends on BR2_BOOTSOURCE_DATAFLASH - help - config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH bool "Boot from a NAND flash" depends on BR2_BOOTSOURCE_NANDFLASH - help - Build u-boot with environment in the NAND flash config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH bool "Boot from a parallell flash" depends on BR2_BOOTSOURCE_FLASH - help - Build u-boot with environment in a flash RAM config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD - bool "Boot from a NAND flash" + bool "Boot from an SD-Card" depends on BR2_BOOTSOURCE_SDCARD - help - Build u-boot with environment on an SD-Card - Not yet supported config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM - bool "Boot from a serial EEPROM" + bool "Boot from a serial EEPROM (Not yet supported)" depends on BR2_BOOTSOURCE_EEPROM - help - Build u-boot with environment in a serial EEPROM - Not yet supported - endchoice @@ -122,6 +98,181 @@ config BR2_TARGET_UBOOT_BOOTSOURCE default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM +config BR2_TARGET_UBOOT_SILENT + bool "silent console" + depends on BR2_TARGET_UBOOT + help + If the option has been enabled, the output can be + silenced by setting the environment variable "silent". + +config BR2_TARGET_UBOOT_TOOL_MKIMAGE + bool "mkimage tool in target" + depends on BR2_TARGET_UBOOT + help + Install mkimage tool in target. + +config BR2_TARGET_UBOOT_TOOL_ENV + bool "fw_printenv tool in target" + depends on BR2_TARGET_UBOOT + help + Install fw_printenv / fw_setenv tools in target. + + +choice + prompt "SDRAM Memory size" + default BR2_TARGET_UBOOT_SDRAM_SIZE_64M + help + Size of the onboard SDRAM + +config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB + bool "256 MB" + +config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB + bool "128 MB" + +config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB + bool "64 MB" + +config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB + bool "32 MB" + +config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB + bool "16 MB" + +config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB + bool "8 MB" + +endchoice + +config BR2_TARGET_UBOOT_MEMORY_SIZE + string + default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB + default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB + default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB + default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB + default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB + default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB + +choice + prompt "Kernel Size" + default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB + +config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB + bool "Kernel size is less than 1.25 MB" + +config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB + bool "Kernel size is less than 1.50 MB" + +config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB + bool "Kernel size is less than 1.75 MB" + +config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB + bool "Kernel size is less than 2.00 MB" + +config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB + bool "Kernel size is less than 2.25 MB" + +config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB + bool "Kernel size is less than 2.50 MB" + +endchoice + +choice + prompt "Dataflash Size" + default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB + bool "Dataflash size is 8 MB" + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB + bool "Dataflash size is 4 MB" + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB + bool "Dataflash size is 2 MB" + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB + bool "Dataflash size is 1 MB" + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB + bool "Dataflash size is 0.5 MB" + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB + bool "Dataflash size is 0.25 MB" + +endchoice + +config BR2_TARGET_UBOOT_DATAFLASH_SIZE + string + default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB + default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB + default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB + default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB + default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB + default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB + +config BR2_TARGET_UBOOT_END_OF_FLASH + string + default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB + default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB + default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB + default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB + default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB + default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB + help + + +config BR2_TARGET_UBOOT_KERNEL_START + string "Kernel SDRAM address" + default "21000000" + help + Kernel is loaded to this address in SDRAM + +config BR2_TARGET_UBOOT_KERNEL_LOCATION + string "Kernel flash address" + default "C0042000" + help + Kernel location in dataflash + +config BR2_TARGET_UBOOT_FILESYSTEM_START + string + default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB + default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB + default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB + default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB + default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB + default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB + help + Kernel is loaded to this SDRAM address + Assumes SDRAM starts at 20000000 + Will need to be updated if the SDRAM is located elsewhere + +config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION + string + default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB + default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB + default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB + default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB + default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB + default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB + help + Determine location for File System in Dataflash + This needs to be updated for other memory technologies + +config BR2_TARGET_UBOOT_FILESYSTEM_SIZE + string "File System Size" + default "6000000" + help + + +menuconfig BR2_TARGET_UBOOT_NETWORK + bool "Network Settings" + default y + depends on BR2_TARGET_UBOOT + help + Network settings for U-boot + +if BR2_TARGET_UBOOT_NETWORK + config BR2_TARGET_UBOOT_SERVERIP string "server ip" depends on BR2_TARGET_UBOOT @@ -164,25 +315,8 @@ config BR2_TARGET_UBOOT_ETH1ADDR depends on BR2_TARGET_AVR32 help Target MAC address for the second ethernet interface. +endif -config BR2_TARGET_UBOOT_SILENT - bool "silent console" - depends on BR2_TARGET_UBOOT - help - If the option has been enabled, the output can be - silenced by setting the environment variable "silent". - -config BR2_TARGET_UBOOT_TOOL_MKIMAGE - bool "mkimage tool in target" - depends on BR2_TARGET_UBOOT - help - Install mkimage tool in target. - -config BR2_TARGET_UBOOT_TOOL_ENV - bool "fw_printenv tool in target" - depends on BR2_TARGET_UBOOT - help - Install fw_printenv / fw_setenv tools in target. endif config BR2_BOOTSOURCE_DATAFLASHCARD |