diff options
Diffstat (limited to 'target/u-boot/Config.in')
| -rw-r--r-- | target/u-boot/Config.in | 378 |
1 files changed, 0 insertions, 378 deletions
diff --git a/target/u-boot/Config.in b/target/u-boot/Config.in deleted file mode 100644 index ca47e18f9..000000000 --- a/target/u-boot/Config.in +++ /dev/null @@ -1,378 +0,0 @@ -menuconfig BR2_TARGET_UBOOT - bool "Das U-Boot Boot Monitor" - help - Build "Das U-Boot" Boot Monitor - -if BR2_TARGET_UBOOT -config BR2_TARGET_UBOOT_BOARDNAME - string "board name" - default "$(BOARD_NAME)" - help - One of U-Boot supported boards to be built. - This will be suffixed with _config to meet U-Boot standard naming. - -choice - prompt "U-Boot Version" - default BR2_TARGET_UBOOT_2010_03 - help - Select the specific U-Boot version you want to use - -config BR2_TARGET_UBOOT_2010_03 - bool "u-boot-2010.03" - -config BR2_TARGET_UBOOT_2009_11 - bool "u-boot-2009.11" - -config BR2_TARGET_UBOOT_2009_08 - bool "u-boot-2009.08" - -config BR2_TARGET_UBOOT_2009_06 - bool "u-boot-2009.06" - depends on BR2_DEPRECATED - -config BR2_TARGET_UBOOT_2009_03 - bool "u-boot-2009.03" - depends on BR2_DEPRECATED - -config BR2_TARGET_UBOOT_2009_01 - bool "u-boot-2009.01" - depends on BR2_DEPRECATED - -config BR2_TARGET_UBOOT_2008_10 - bool "u-boot-2008.10" - depends on BR2_DEPRECATED - -config BR2_TARGET_UBOOT_1_2_0_ATMEL - bool "u-boot-1.2.0-atmel" - depends on BR2_TARGET_AT91 - -endchoice - -config BR2_UBOOT_VERSION - string - default "2010.03" if BR2_TARGET_UBOOT_2010_03 - default "2009.11" if BR2_TARGET_UBOOT_2009_11 - default "2009.08" if BR2_TARGET_UBOOT_2009_08 - default "2009.06" if BR2_TARGET_UBOOT_2009_06 - default "2009.03" if BR2_TARGET_UBOOT_2009_03 - default "2009.01" if BR2_TARGET_UBOOT_2009_01 - default "2008.10" if BR2_TARGET_UBOOT_2008_10 - default "1.2.0-atmel" if BR2_TARGET_UBOOT_1_2_0_ATMEL - -config BR2_U_BOOT_SITE - string - default "$(BR2_ATMEL_MIRROR)" if BR2_TARGET_UBOOT_1_2_0_ATMEL - default "ftp://ftp.denx.de/pub/u-boot" - -source "target/device/Config.in.u-boot" - -config BR2_TARGET_UBOOT_CUSTOM_PATCH - string "custom patch" - help - If your board requires a custom patch, add the path to the file here. - Most users may leave this empty - -choice - prompt "Bootsource" - depends on BR2_BOOTSOURCE - default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD - - config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD - bool "Boot from dataflashcard" - depends on BR2_BOOTSOURCE_DATAFLASHCARD - - config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - bool "Boot from dataflash" - depends on BR2_BOOTSOURCE_DATAFLASH - - config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH - bool "Boot from a NAND flash" - depends on BR2_BOOTSOURCE_NANDFLASH - - config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH - bool "Boot from a parallell flash" - depends on BR2_BOOTSOURCE_FLASH - - config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD - bool "Boot from an SD-Card" - depends on BR2_BOOTSOURCE_SDCARD - - config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM - bool "Boot from a serial EEPROM (Not yet supported)" - depends on BR2_BOOTSOURCE_EEPROM - -endchoice - -config BR2_TARGET_UBOOT_BOOTSOURCE - string - depends on BR2_BOOTSOURCE - default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD - default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH - default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH - default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD - default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM - -config BR2_TARGET_UBOOT_SILENT - bool "silent console" - help - If the option has been enabled, the output can be - silenced by setting the environment variable "silent". - -config BR2_TARGET_UBOOT_TOOL_MKIMAGE - bool "mkimage tool in target" - help - Install mkimage tool in target. - -config BR2_TARGET_UBOOT_TOOL_ENV - bool "fw_printenv tool in target" - help - Install fw_printenv / fw_setenv tools in target. - -menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV - bool "Generate a default environment" - help - Will generate variables for factory default command - and autoscript. - -if BR2_TARGET_UBOOT_DEFAULT_ENV -choice - prompt "SDRAM Memory size" - default BR2_TARGET_UBOOT_SDRAM_SIZE_64M - help - Size of the onboard SDRAM - -config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB - bool "256 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB - bool "128 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB - bool "64 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB - bool "32 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB - bool "16 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB - bool "8 MB" - -endchoice - -config BR2_TARGET_UBOOT_MEMORY_SIZE - string - default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB - default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB - default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB - default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB - default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB - default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB - -choice - prompt "Kernel Size" - default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - -config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB - bool "Kernel size is less than 1.25 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB - bool "Kernel size is less than 1.50 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB - bool "Kernel size is less than 1.75 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - bool "Kernel size is less than 2.00 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB - bool "Kernel size is less than 2.25 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB - bool "Kernel size is less than 2.50 MB" - -endchoice - -choice - prompt "Dataflash Size" - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB - bool "Dataflash size is 8 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB - bool "Dataflash size is 4 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB - bool "Dataflash size is 2 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB - bool "Dataflash size is 1 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB - bool "Dataflash size is 0.5 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB - bool "Dataflash size is 0.25 MB" - -endchoice - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE - string - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB - default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB - default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB - default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB - default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB - default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB - -config BR2_TARGET_UBOOT_END_OF_FLASH - string - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB - default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB - default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB - default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB - default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB - default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB - help - -config BR2_TARGET_UBOOT_KERNEL_START - string "Kernel SDRAM address" - default "21000000" - help - Kernel is loaded to this address in SDRAM - -config BR2_TARGET_UBOOT_KERNEL_LOCATION - string "Kernel flash address" - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \ - BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "" - help - Kernel location in dataflash - -config BR2_TARGET_UBOOT_FILESYSTEM_START - string - default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB - default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB - default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB - default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB - default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB - help - Kernel is loaded to this SDRAM address - Assumes SDRAM starts at 20000000 - Will need to be updated if the SDRAM is located elsewhere - -config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION - string - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \ - BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB - default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB - default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB - default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB - default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB - help - Determine location for File System in Dataflash - This needs to be updated for other memory technologies - -config BR2_TARGET_UBOOT_FILESYSTEM_SIZE - string "File System Size" - default "6000000" - help - -menuconfig BR2_TARGET_UBOOT_NETWORK - bool "Network Settings" - default y - help - Network settings for U-boot - -if BR2_TARGET_UBOOT_NETWORK - -config BR2_TARGET_UBOOT_SERVERIP - string "server ip" - default "10.175.196.221" - help - TFTP server ip address - -config BR2_TARGET_UBOOT_IPADDR - string "ip address" - default "10.175.196.18" - help - Target ip address - -config BR2_TARGET_UBOOT_GATEWAY - string "gateway ip" - default "10.175.196.1" - help - Gateway ip address - -config BR2_TARGET_UBOOT_NETMASK - string "netmask" - default "255.255.255.0" - help - Network Mask - -config BR2_TARGET_UBOOT_ETHADDR - string "ethernet address" - default "04:25:fe:ed:00:18" - help - Target MAC address for the ethernet interface. - This should be changed for production units - -config BR2_TARGET_UBOOT_ETH1ADDR - string "ethernet 2 address" - help - Target MAC address for the second ethernet interface. - -endif # BR2_TARGET_UBOOT_NETWORK - -endif # BR2_TARGET_UBOOT_DEFAULT_ENV - -endif # BR2_TARGET_UBOOT - -config BR2_BOOTSOURCE_DATAFLASHCARD - bool - help - Allow use of a dataflashcard as a boot source - -config BR2_BOOTSOURCE_DATAFLASH - bool - help - Allow use of a dataflash as a boot source - -config BR2_BOOTSOURCE_NANDFLASH - bool - help - Allow use of a NAND flash as a boot source - -config BR2_BOOTSOURCE_FLASH - bool - help - Allow use of a flash RAM as a boot source - -config BR2_BOOTSOURCE_SDCARD - bool - help - Allow use of an SD-card as a boot source - -config BR2_BOOTSOURCE_EEPROM - bool - help - Allow use of a serial eeprom as a boot source - -config BR2_BOOTSOURCE - bool - default y if BR2_BOOTSOURCE_DATAFLASHCARD - default y if BR2_BOOTSOURCE_DATAFLASH - default y if BR2_BOOTSOURCE_NANDFLASH - default y if BR2_BOOTSOURCE_FLASH - default y if BR2_BOOTSOURCE_SDCARD - default y if BR2_BOOTSOURCE_EEPROM |