diff options
Diffstat (limited to 'target/linux-experimental/Makefile.in')
| -rw-r--r-- | target/linux-experimental/Makefile.in | 122 |
1 files changed, 61 insertions, 61 deletions
diff --git a/target/linux-experimental/Makefile.in b/target/linux-experimental/Makefile.in index 6f37aa74c..ab9a6135d 100644 --- a/target/linux-experimental/Makefile.in +++ b/target/linux-experimental/Makefile.in @@ -9,13 +9,13 @@ ifneq ($(filter $(TARGETS),linux26),) ifeq ($(LINUX_HEADERS_VERSION),) # Version of Linux to download and then apply patches to # XXX: andersee, i do not understand why we need this (BF) -DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION))) +DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION))) # ")) -LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION))) +LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION))) # ")) -LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH))) +LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH))) # ")) -LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH))) +LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH))) # " )) MKIMAGE:=$(BUILD_DIR)/mkimage @@ -26,13 +26,13 @@ endif LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION) -else # --------------------------------------------------- +else # --------------------------------------------------- # Define DOWNLOAD_LINUX26_VERSION unless defined ifeq ($(strip $(BR2_DOWNLOAD_LINUX26_VERSION)),) DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION) else -DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION))) +DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION))) # ")) endif @@ -41,15 +41,15 @@ endif ifeq ($(strip $(BR2_LINUX26_VERSION)),) LINUX26_VERSION=$(LINUX_HEADERS_VERSION) else -LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION))) +LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION))) # ")) endif -endif # --------------------------------------------------- +endif # --------------------------------------------------- # Handle case when we want to build using an "rc" patch # Example: to build 2.6.21-rc1 you need to: -# * Download linux-2.6.20 +# * Download linux-2.6.20 # * Apply patch-2.6.21-rc1 LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2 @@ -57,7 +57,7 @@ LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6 LINUX26_BZCAT:=$(BZCAT) # Linux kernel binary -LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT))) +LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT))) # " )) # Linux kernel configuration file @@ -102,11 +102,11 @@ LINUX_DIR=$(LINUX26_DIR) LINUX_KERNEL=$(LINUX26_KERNEL) # kernel patches -ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),) +ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),) # "))) LINUX26_PATCH_DIR:=$(BR2_BOARD_PATH)/kernel-patches/ endif -PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR))) +PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR))) # " )) LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \ @@ -120,24 +120,24 @@ $(LINUX26_KCONFIG): echo "and install it as $(LINUX26_KCONFIG)"; \ echo ""; \ sleep 5; \ - fi; + fi # Check if we have a release candidate. -# This makes life complex -# To build linux-2.6.21-rc2 you need to: -# * Download linux.2.6.20.tar.bz2 -# * Download patch-2.6.21-rc2.bz2 -# I:E you have to download the *previous* major version - -ifneq ($(LINUX26_RC_PATCH),) +# This makes life complex +# To build linux-2.6.21-rc2 you need to: +# * Download linux.2.6.20.tar.bz2 +# * Download patch-2.6.21-rc2.bz2 +# I:E you have to download the *previous* major version + +ifneq ($(LINUX26_RC_PATCH),) # We have a "release candidate" LINUX26_RC_PATCH_SOURCE:=$(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH) # Create rule to download the patch $(LINUX26_RC_PATCH_SOURCE): mkdir -p $(PROJECT_BUILD_DIR)/linux-patch/ - $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH) -# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2 + $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH) +# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2 else # We have a vanilla style linux kernel LINUX26_RC_PATCH_SOURCE:= @@ -155,7 +155,7 @@ ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION)) # Rename the dir from the downloaded version to the AFTER patch version mv -f $(LINUX26_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR) endif -ifneq ($(LINUX26_RC_PATCH),) +ifneq ($(LINUX26_RC_PATCH),) -(cd $(LINUX26_DIR); $(LINUX26_BZCAT) $(LINUX26_RC_PATCH_SOURCE) | patch -p1) endif -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX26_DIR) linux) @@ -168,7 +168,7 @@ $(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) touch $@ -$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG) +$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG) -ls -l $(LINUX26_DIR)/.patched -ls -l $(LINUX26_KCONFIG) -ls -l $(LINUX26_DIR)/.configured @@ -194,7 +194,7 @@ endif $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig include/linux/version.h touch $@ -$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured +$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare touch $@ @@ -211,8 +211,8 @@ $(LINUX26_DIR)/vmlinux: $(LINUX26_DIR)/.depend_done $(STAGING_DIR)/include/linux #----------------------------------------------------------------------------------- -# Rule can be enabled by setting -# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC) +# Rule can be enabled by setting +# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC) # $(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT) [ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot @@ -220,33 +220,33 @@ $(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT) touch -c $@ #----------------------------------------------------------------------------------- -# Rule can be enabled by setting -# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL) -# LINUX26_FORMAT:= vmlinux +# Rule can be enabled by setting +# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL) +# LINUX26_FORMAT:= vmlinux -$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage +$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage cp -dpf $(LINUX26_DIR)/uImage $(BINARIES_DIR)/$(LINUX26_KERNEL) cp -dpf $(LINUX26_DIR)/uImage /tftpboot/$(LINUX26_KERNEL) - mkdir -p $(TARGET_DIR)/boot/ + mkdir -p $(TARGET_DIR)/boot/ cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config - cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config - cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config + cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config + cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config $(PROJECT_BUILD_DIR)/linux.bin: $(LINUX26_DIR)/vmlinux ${KERNEL_CROSS}objcopy -O binary -S $(LINUX26_DIR)/vmlinux $(PROJECT_BUILD_DIR)/linux.bin -$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage - cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage - +$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage + cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage + -$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE) +$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE) gzip -v9 -c $(PROJECT_BUILD_DIR)/linux.bin > $(PROJECT_BUILD_DIR)/linux.bin.gz - $(MKIMAGE) -A $(ARCH) \ - -O linux \ - -C gzip \ - -a 0x20008000 \ - -e 0x20008000 \ - -d $(PROJECT_BUILD_DIR)/linux.bin.gz \ + $(MKIMAGE) -A $(ARCH) \ + -O linux \ + -C gzip \ + -a 0x20008000 \ + -e 0x20008000 \ + -d $(PROJECT_BUILD_DIR)/linux.bin.gz \ $(LINUX26_DIR)/uImage rm -f $(PROJECT_BUILD_DIR)/linux.bin.gz #----------------------------------------------------------------------------------- @@ -296,23 +296,23 @@ linux26-dirclean: rm -rf $(LINUX26_DIR) linux-update: - cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG) + cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG) linux-test: - @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION) - @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX) - @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) - @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION) - @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH) - @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH) - @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION) - @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION) - @echo "LINUX26_VERSION" $(LINUX26_VERSION) - @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH) - @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG) - @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG) - @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM) - @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT) - @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS) - @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1) + @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION) + @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX) + @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) + @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION) + @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH) + @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH) + @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION) + @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION) + @echo "LINUX26_VERSION" $(LINUX26_VERSION) + @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH) + @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG) + @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG) + @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM) + @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT) + @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS) + @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1) |