diff options
Diffstat (limited to 'target/device/jp')
67 files changed, 0 insertions, 4495 deletions
diff --git a/target/device/jp/Config.in b/target/device/jp/Config.in deleted file mode 100644 index 512e726ec..000000000 --- a/target/device/jp/Config.in +++ /dev/null @@ -1,12 +0,0 @@ -config BR2_TARGET_Q5 - bool "jp-embedded Q5 board support" - depends on BR2_mipsel - select BR2_PACKAGE_LINUX - help - jp-embedded Q5 series MIPS based boards, see - http://www.jp-embedded.com for further information. - - -comment "Package support" - depends on BR2_TARGET_Q5 - diff --git a/target/device/jp/Makefile.in b/target/device/jp/Makefile.in deleted file mode 100644 index 3490b244f..000000000 --- a/target/device/jp/Makefile.in +++ /dev/null @@ -1,7 +0,0 @@ -# Override the default uClibc configuration -ifeq ($(BR2_TARGET_Q5),y) - -include target/device/jp/q5/Makefile.in -include target/device/jp/q5/linux.mk - -endif diff --git a/target/device/jp/q5/Makefile.in b/target/device/jp/q5/Makefile.in deleted file mode 100644 index a95b24546..000000000 --- a/target/device/jp/q5/Makefile.in +++ /dev/null @@ -1,10 +0,0 @@ -#JP_Q5_PATH=target/device/jp/q5 -BOARD_PATH=target/device/jp/q5 - -BR2_PACKAGE_BUSYBOX_CONFIG=$(BOARD_PATH)/busybox.config -UCLIBC_CONFIG_FILE=$(BOARD_PATH)/uClibc.config.$(ARCH) - -TARGET_SKELETON=$(BOARD_PATH)/target_skeleton -TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt - -TARGETS+=linux diff --git a/target/device/jp/q5/busybox.config b/target/device/jp/q5/busybox.config deleted file mode 100644 index 061e5f445..000000000 --- a/target/device/jp/q5/busybox.config +++ /dev/null @@ -1,483 +0,0 @@ -# -# Automatically generated make config: don't edit -# -HAVE_DOT_CONFIG=y - -# -# General Configuration -# -# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set -CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -CONFIG_FEATURE_VERBOSE_USAGE=y -# CONFIG_FEATURE_INSTALLER is not set -# CONFIG_LOCALE_SUPPORT is not set -# CONFIG_FEATURE_DEVFS is not set -CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set -CONFIG_FEATURE_SUID=y -# CONFIG_FEATURE_SUID_CONFIG is not set -# CONFIG_SELINUX is not set - -# -# Build Options -# -# CONFIG_STATIC is not set -CONFIG_LFS=y -# USING_CROSS_COMPILER is not set -EXTRA_CFLAGS_OPTIONS="" - -# -# Installation Options -# -# CONFIG_INSTALL_NO_USR is not set -PREFIX="./_install" - -# -# Archival Utilities -# -# CONFIG_AR is not set -CONFIG_BUNZIP2=y -# CONFIG_CPIO is not set -# CONFIG_DPKG is not set -# CONFIG_DPKG_DEB is not set -CONFIG_GUNZIP=y -# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set -CONFIG_GZIP=y -# CONFIG_RPM2CPIO is not set -# CONFIG_RPM is not set -CONFIG_TAR=y -CONFIG_FEATURE_TAR_CREATE=y -CONFIG_FEATURE_TAR_BZIP2=y -# CONFIG_FEATURE_TAR_FROM is not set -CONFIG_FEATURE_TAR_GZIP=y -# CONFIG_FEATURE_TAR_COMPRESS is not set -# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set -CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set -# CONFIG_UNCOMPRESS is not set -CONFIG_UNZIP=y - -# -# Common options for cpio and tar -# -# CONFIG_FEATURE_UNARCHIVE_TAPE is not set - -# -# Coreutils -# -CONFIG_BASENAME=y -# CONFIG_CAL is not set -CONFIG_CAT=y -CONFIG_CHGRP=y -CONFIG_CHMOD=y -CONFIG_CHOWN=y -CONFIG_CHROOT=y -CONFIG_CMP=y -# CONFIG_COMM is not set -CONFIG_CP=y -CONFIG_CUT=y -CONFIG_DATE=y -CONFIG_FEATURE_DATE_ISOFMT=y -CONFIG_DD=y -CONFIG_DF=y -CONFIG_DIRNAME=y -CONFIG_DOS2UNIX=y -CONFIG_UNIX2DOS=y -CONFIG_DU=y -CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y -CONFIG_ECHO=y -CONFIG_FEATURE_FANCY_ECHO=y -CONFIG_ENV=y -# CONFIG_PRINTENV is not set -CONFIG_EXPR=y -CONFIG_FALSE=y -# CONFIG_FOLD is not set -CONFIG_HEAD=y -# CONFIG_FEATURE_FANCY_HEAD is not set -CONFIG_HOSTID=y -CONFIG_ID=y -CONFIG_INSTALL=y -# CONFIG_LENGTH is not set -CONFIG_LN=y -CONFIG_LOGNAME=y -CONFIG_LS=y -CONFIG_FEATURE_LS_FILETYPES=y -CONFIG_FEATURE_LS_FOLLOWLINKS=y -CONFIG_FEATURE_LS_RECURSIVE=y -CONFIG_FEATURE_LS_SORTFILES=y -CONFIG_FEATURE_LS_TIMESTAMPS=y -CONFIG_FEATURE_LS_USERNAME=y -CONFIG_FEATURE_LS_COLOR=y -CONFIG_MD5SUM=y -CONFIG_MKDIR=y -# CONFIG_MKFIFO is not set -CONFIG_MKNOD=y -CONFIG_MV=y -# CONFIG_NICE is not set -# CONFIG_OD is not set -# CONFIG_PRINTF is not set -CONFIG_PWD=y -# CONFIG_REALPATH is not set -CONFIG_RM=y -CONFIG_RMDIR=y -# CONFIG_SEQ is not set -CONFIG_SHA1SUM=y -CONFIG_SLEEP=y -# CONFIG_FEATURE_FANCY_SLEEP is not set -CONFIG_SORT=y -CONFIG_SORT_BIG=y -# CONFIG_STAT is not set -CONFIG_STTY=y -# CONFIG_SUM is not set -CONFIG_SYNC=y -CONFIG_TAIL=y -CONFIG_FEATURE_FANCY_TAIL=y -CONFIG_TEE=y -CONFIG_FEATURE_TEE_USE_BLOCK_IO=y -CONFIG_TEST=y - -# -# test (forced enabled for use with shell) -# -CONFIG_FEATURE_TEST_64=y -CONFIG_TOUCH=y -# CONFIG_TR is not set -CONFIG_TRUE=y -CONFIG_TTY=y -CONFIG_UNAME=y -CONFIG_UNIQ=y -CONFIG_USLEEP=y -CONFIG_UUDECODE=y -CONFIG_UUENCODE=y -# CONFIG_WATCH is not set -CONFIG_WC=y -# CONFIG_WHO is not set -CONFIG_WHOAMI=y -CONFIG_YES=y - -# -# Common options for cp and mv -# -CONFIG_FEATURE_PRESERVE_HARDLINKS=y - -# -# Common options for ls and more -# -CONFIG_FEATURE_AUTOWIDTH=y - -# -# Common options for df, du, ls -# -CONFIG_FEATURE_HUMAN_READABLE=y - -# -# Common options for md5sum, sha1sum -# -CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -# -# Console Utilities -# -CONFIG_CHVT=y -CONFIG_CLEAR=y -CONFIG_DEALLOCVT=y -# CONFIG_DUMPKMAP is not set -# CONFIG_LOADFONT is not set -# CONFIG_LOADKMAP is not set -CONFIG_OPENVT=y -CONFIG_RESET=y -# CONFIG_SETKEYCODES is not set - -# -# Debian Utilities -# -CONFIG_MKTEMP=y -# CONFIG_PIPE_PROGRESS is not set -CONFIG_READLINK=y -CONFIG_FEATURE_READLINK_FOLLOW=y -CONFIG_RUN_PARTS=y -CONFIG_START_STOP_DAEMON=y -CONFIG_WHICH=y - -# -# Linux Ext2 FS Progs -# -# CONFIG_CHATTR is not set -# CONFIG_LSATTR is not set - -# -# Editors -# -# CONFIG_AWK is not set -# CONFIG_PATCH is not set -CONFIG_SED=y -CONFIG_VI=y -CONFIG_FEATURE_VI_COLON=y -CONFIG_FEATURE_VI_YANKMARK=y -CONFIG_FEATURE_VI_SEARCH=y -CONFIG_FEATURE_VI_USE_SIGNALS=y -CONFIG_FEATURE_VI_DOT_CMD=y -CONFIG_FEATURE_VI_READONLY=y -CONFIG_FEATURE_VI_SETOPTS=y -CONFIG_FEATURE_VI_SET=y -CONFIG_FEATURE_VI_WIN_RESIZE=y -CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y - -# -# Finding Utilities -# -CONFIG_FIND=y -CONFIG_FEATURE_FIND_MTIME=y -CONFIG_FEATURE_FIND_PERM=y -CONFIG_FEATURE_FIND_TYPE=y -CONFIG_FEATURE_FIND_XDEV=y -# CONFIG_FEATURE_FIND_NEWER is not set -# CONFIG_FEATURE_FIND_INUM is not set -CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y -CONFIG_FEATURE_GREP_CONTEXT=y -CONFIG_XARGS=y -# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set -CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y -CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y -CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y - -# -# Init Utilities -# -CONFIG_INIT=y -CONFIG_FEATURE_USE_INITTAB=y -CONFIG_FEATURE_INITRD=y -# CONFIG_FEATURE_INIT_COREDUMPS is not set -CONFIG_FEATURE_EXTRA_QUIET=y -CONFIG_HALT=y -CONFIG_POWEROFF=y -CONFIG_REBOOT=y -# CONFIG_MESG is not set - -# -# Login/Password Management Utilities -# -# CONFIG_USE_BB_PWD_GRP is not set -CONFIG_ADDGROUP=y -CONFIG_DELGROUP=y -CONFIG_ADDUSER=y -CONFIG_DELUSER=y -CONFIG_GETTY=y -# CONFIG_FEATURE_U_W_TMP is not set -CONFIG_LOGIN=y -CONFIG_FEATURE_SECURETTY=y -CONFIG_PASSWD=y -CONFIG_SU=y -CONFIG_SULOGIN=y -CONFIG_VLOCK=y - -# -# Common options for adduser, deluser, login, su -# -CONFIG_FEATURE_SHADOWPASSWDS=y - -# -# Miscellaneous Utilities -# -# CONFIG_ADJTIMEX is not set -# CONFIG_CROND is not set -# CONFIG_CRONTAB is not set -CONFIG_DC=y -# CONFIG_DEVFSD is not set -# CONFIG_EJECT is not set -# CONFIG_LAST is not set -# CONFIG_HDPARM is not set -# CONFIG_MAKEDEVS is not set -CONFIG_MT=y -# CONFIG_RX is not set -CONFIG_STRINGS=y -CONFIG_TIME=y -# CONFIG_WATCHDOG is not set - -# -# Linux Module Utilities -# -CONFIG_INSMOD=y -CONFIG_FEATURE_2_4_MODULES=y -# CONFIG_FEATURE_2_6_MODULES is not set -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -CONFIG_LSMOD=y -CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y -CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y -CONFIG_MODPROBE=y -CONFIG_RMMOD=y -CONFIG_FEATURE_CHECK_TAINTED_MODULE=y - -# -# Networking Utilities -# -# CONFIG_FEATURE_IPV6 is not set -# CONFIG_ARPING is not set -# CONFIG_ETHER_WAKE is not set -# CONFIG_FAKEIDENTD is not set -# CONFIG_FTPGET is not set -# CONFIG_FTPPUT is not set -CONFIG_HOSTNAME=y -# CONFIG_HTTPD is not set -CONFIG_IFCONFIG=y -CONFIG_FEATURE_IFCONFIG_STATUS=y -# CONFIG_FEATURE_IFCONFIG_SLIP is not set -# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set -# CONFIG_FEATURE_IFCONFIG_HW is not set -# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set -CONFIG_IFUPDOWN=y -# CONFIG_FEATURE_IFUPDOWN_IP is not set -CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y -CONFIG_FEATURE_IFUPDOWN_IPV4=y -# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set -# CONFIG_FEATURE_IFUPDOWN_IPX is not set -# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set -# CONFIG_INETD is not set -# CONFIG_IP is not set -# CONFIG_IPCALC is not set -# CONFIG_IPADDR is not set -# CONFIG_IPLINK is not set -# CONFIG_IPROUTE is not set -# CONFIG_IPTUNNEL is not set -# CONFIG_NAMEIF is not set -# CONFIG_NC is not set -CONFIG_NETSTAT=y -CONFIG_NSLOOKUP=y -CONFIG_PING=y -CONFIG_FEATURE_FANCY_PING=y -CONFIG_ROUTE=y -CONFIG_TELNET=y -CONFIG_FEATURE_TELNET_TTYPE=y -# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set -# CONFIG_TELNETD is not set -# CONFIG_TFTP is not set -# CONFIG_TRACEROUTE is not set -# CONFIG_VCONFIG is not set -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -# CONFIG_FEATURE_WGET_IP6_LITERAL is not set - -# -# udhcp Server/Client -# -CONFIG_UDHCPD=y -CONFIG_UDHCPC=y -CONFIG_DUMPLEASES=y -CONFIG_FEATURE_UDHCP_SYSLOG=y -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_ZCIP is not set - -# -# Process Utilities -# -CONFIG_FREE=y -CONFIG_KILL=y -CONFIG_KILLALL=y -CONFIG_PIDOF=y -CONFIG_PS=y -# CONFIG_RENICE is not set -# CONFIG_TOP is not set -CONFIG_UPTIME=y -# CONFIG_SYSCTL is not set - -# -# Another Bourne-like Shell -# -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_LASH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -CONFIG_ASH=y - -# -# Ash Shell Options -# -CONFIG_ASH_JOB_CONTROL=y -# CONFIG_ASH_TIMEOUT is not set -CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y -# CONFIG_ASH_GETOPTS is not set -# CONFIG_ASH_CMDCMD is not set -# CONFIG_ASH_MAIL is not set -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y -# CONFIG_ASH_RANDOM_SUPPORT is not set -# CONFIG_HUSH is not set -# CONFIG_LASH is not set -# CONFIG_MSH is not set - -# -# Bourne Shell Options -# -# CONFIG_FEATURE_SH_EXTRA_QUIET is not set -# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set -CONFIG_FEATURE_COMMAND_EDITING=y -CONFIG_FEATURE_COMMAND_HISTORY=15 -CONFIG_FEATURE_COMMAND_SAVEHISTORY=y -CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y -# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set -CONFIG_FEATURE_SH_FANCY_PROMPT=y - -# -# System Logging Utilities -# -CONFIG_SYSLOGD=y -CONFIG_FEATURE_ROTATE_LOGFILE=y -# CONFIG_FEATURE_REMOTE_LOG is not set -# CONFIG_FEATURE_IPC_SYSLOG is not set -CONFIG_KLOGD=y -CONFIG_LOGGER=y - -# -# Linux System Utilities -# -CONFIG_DMESG=y -# CONFIG_FBSET is not set -# CONFIG_FDFLUSH is not set -CONFIG_FDFORMAT=y -CONFIG_FDISK=y -FDISK_SUPPORT_LARGE_DISKS=y -CONFIG_FEATURE_FDISK_WRITABLE=y -# CONFIG_FEATURE_AIX_LABEL is not set -# CONFIG_FEATURE_SGI_LABEL is not set -# CONFIG_FEATURE_SUN_LABEL is not set -# CONFIG_FEATURE_OSF_LABEL is not set -# CONFIG_FEATURE_FDISK_ADVANCED is not set -# CONFIG_FREERAMDISK is not set -# CONFIG_FSCK_MINIX is not set -# CONFIG_MKFS_MINIX is not set -CONFIG_GETOPT=y -CONFIG_HEXDUMP=y -CONFIG_HWCLOCK=y -CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y -# CONFIG_LOSETUP is not set -# CONFIG_MKSWAP is not set -CONFIG_MORE=y -CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_PIVOT_ROOT=y -CONFIG_RDATE=y -CONFIG_SWAPONOFF=y -CONFIG_MOUNT=y -# CONFIG_NFSMOUNT is not set -CONFIG_UMOUNT=y -# CONFIG_FEATURE_MOUNT_FORCE is not set - -# -# Common options for mount/umount -# -CONFIG_FEATURE_MOUNT_LOOP=y -# CONFIG_FEATURE_MTAB_SUPPORT is not set -# CONFIG_READPROFILE is not set - -# -# Debugging Options -# -# CONFIG_DEBUG is not set diff --git a/target/device/jp/q5/device_table.txt b/target/device/jp/q5/device_table.txt deleted file mode 100644 index 8b46ca032..000000000 --- a/target/device/jp/q5/device_table.txt +++ /dev/null @@ -1,162 +0,0 @@ -# When building a target filesystem, it is desirable to not have to -# become root and then run 'mknod' a thousand times. Using a device -# table you can create device nodes and directories "on the fly". -# -# This is a sample device table file for use with genext2fs. You can -# do all sorts of interesting things with a device table file. For -# example, if you want to adjust the permissions on a particular file -# you can just add an entry like: -# /sbin/foobar f 2755 0 0 - - - - - -# and (assuming the file /sbin/foobar exists) it will be made setuid -# root (regardless of what its permissions are on the host filesystem. -# Furthermore, you can use a single table entry to create a many device -# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] -# I could just use the following two table entries: -# /dev/hda b 640 0 0 3 0 0 0 - -# /dev/hda b 640 0 0 3 1 1 1 15 -# -# Device table entries take the form of: -# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count> -# where name is the file name, type can be one of: -# f A regular file -# d Directory -# c Character special device file -# b Block special device file -# p Fifo (named pipe) -# uid is the user id for the target file, gid is the group id for the -# target file. The rest of the entries (major, minor, etc) apply only -# to device special files. - -# Have fun -# -Erik Andersen <andersen@codepoet.org> -# - -#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count> -/dev d 755 0 0 - - - - - -/dev/pts d 755 0 0 - - - - - -/tmp d 1777 0 0 - - - - - -/etc d 755 0 0 - - - - - -/home/default d 2755 1000 1000 - - - - - -#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count> -/bin/busybox f 4755 0 0 - - - - - -/etc/shadow f 600 0 0 - - - - - -/etc/passwd f 644 0 0 - - - - - -/etc/network/if-up.d d 755 0 0 - - - - - -/etc/network/if-pre-up.d d 755 0 0 - - - - - -/etc/network/if-down.d d 755 0 0 - - - - - -/etc/network/if-post-down.d d 755 0 0 - - - - - -/usr/share/udhcpc/default.script f 755 0 0 - - - - - -# uncomment this to allow starting x as non-root -#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - - -# Normal system devices -/dev/mem c 640 0 0 1 1 0 0 - -/dev/kmem c 640 0 0 1 2 0 0 - -/dev/null c 666 0 0 1 3 0 0 - -/dev/zero c 666 0 0 1 5 0 0 - -/dev/random c 666 0 0 1 8 0 0 - -/dev/urandom c 666 0 0 1 9 0 0 - -/dev/ram b 640 0 0 1 1 0 0 - -/dev/ram b 640 0 0 1 0 0 1 4 -/dev/loop b 640 0 0 7 0 0 1 2 -/dev/rtc c 640 0 0 10 135 - - - -/dev/console c 666 0 0 5 1 - - - -/dev/tty c 666 0 0 5 0 - - - -/dev/tty c 666 0 0 4 0 0 1 8 -/dev/ttyp c 666 0 0 3 0 0 1 10 -/dev/ptyp c 666 0 0 2 0 0 1 10 -/dev/ptmx c 666 0 0 5 2 - - - -/dev/ttyP c 666 0 0 57 0 0 1 4 -/dev/ttyS c 666 0 0 4 64 0 1 4 -/dev/fb c 640 0 5 29 0 0 32 4 -#/dev/ttySA c 666 0 0 204 5 0 1 3 -/dev/psaux c 666 0 0 10 1 0 0 - -#/dev/ppp c 666 0 0 108 0 - - - - -# MTD stuff -/dev/mtd c 640 0 0 90 0 0 2 4 -/dev/mtdblock b 640 0 0 31 0 0 1 4 - -#Tun/tap driver -/dev/net d 755 0 0 - - - - - -/dev/net/tun c 660 0 0 10 200 - - - - -# Audio stuff -#/dev/audio c 666 0 29 14 4 - - - -#/dev/audio1 c 666 0 29 14 20 - - - -#/dev/dsp c 666 0 29 14 3 - - - -#/dev/dsp1 c 666 0 29 14 19 - - - -#/dev/sndstat c 666 0 29 14 6 - - - - -# User-mode Linux stuff -/dev/ubda b 640 0 0 98 0 0 0 - -/dev/ubda b 640 0 0 98 1 1 1 15 - -# IDE Devices -/dev/hda b 640 0 0 3 0 0 0 - -/dev/hda b 640 0 0 3 1 1 1 15 -/dev/hdb b 640 0 0 3 64 0 0 - -/dev/hdb b 640 0 0 3 65 1 1 15 -#/dev/hdc b 640 0 0 22 0 0 0 - -#/dev/hdc b 640 0 0 22 1 1 1 15 -#/dev/hdd b 640 0 0 22 64 0 0 - -#/dev/hdd b 640 0 0 22 65 1 1 15 -#/dev/hde b 640 0 0 33 0 0 0 - -#/dev/hde b 640 0 0 33 1 1 1 15 -#/dev/hdf b 640 0 0 33 64 0 0 - -#/dev/hdf b 640 0 0 33 65 1 1 15 -#/dev/hdg b 640 0 0 34 0 0 0 - -#/dev/hdg b 640 0 0 34 1 1 1 15 -#/dev/hdh b 640 0 0 34 64 0 0 - -#/dev/hdh b 640 0 0 34 65 1 1 15 - -# SCSI Devices -#/dev/sda b 640 0 0 8 0 0 0 - -#/dev/sda b 640 0 0 8 1 1 1 15 -#/dev/sdb b 640 0 0 8 16 0 0 - -#/dev/sdb b 640 0 0 8 17 1 1 15 -#/dev/sdc b 640 0 0 8 32 0 0 - -#/dev/sdc b 640 0 0 8 33 1 1 15 -#/dev/sdd b 640 0 0 8 48 0 0 - -#/dev/sdd b 640 0 0 8 49 1 1 15 -#/dev/sde b 640 0 0 8 64 0 0 - -#/dev/sde b 640 0 0 8 65 1 1 15 -#/dev/sdf b 640 0 0 8 80 0 0 - -#/dev/sdf b 640 0 0 8 81 1 1 15 -#/dev/sdg b 640 0 0 8 96 0 0 - -#/dev/sdg b 640 0 0 8 97 1 1 15 -#/dev/sdh b 640 0 0 8 112 0 0 - -#/dev/sdh b 640 0 0 8 113 1 1 15 -#/dev/sg c 640 0 0 21 0 0 1 15 -#/dev/scd b 640 0 0 11 0 0 1 15 -#/dev/st c 640 0 0 9 0 0 1 8 -#/dev/nst c 640 0 0 9 128 0 1 8 -#/dev/st c 640 0 0 9 32 1 1 4 -#/dev/st c 640 0 0 9 64 1 1 4 -#/dev/st c 640 0 0 9 96 1 1 4 - -# Floppy disk devices -#/dev/fd b 640 0 0 2 0 0 1 2 -#/dev/fd0d360 b 640 0 0 2 4 0 0 - -#/dev/fd1d360 b 640 0 0 2 5 0 0 - -#/dev/fd0h1200 b 640 0 0 2 8 0 0 - -#/dev/fd1h1200 b 640 0 0 2 9 0 0 - -#/dev/fd0u1440 b 640 0 0 2 28 0 0 - -#/dev/fd1u1440 b 640 0 0 2 29 0 0 - -#/dev/fd0u2880 b 640 0 0 2 32 0 0 - -#/dev/fd1u2880 b 640 0 0 2 33 0 0 - - -# All the proprietary cdrom devices in the world -#/dev/aztcd b 640 0 0 29 0 0 0 - -#/dev/bpcd b 640 0 0 41 0 0 0 - -#/dev/capi20 c 640 0 0 68 0 0 1 2 -#/dev/cdu31a b 640 0 0 15 0 0 0 - -#/dev/cdu535 b 640 0 0 24 0 0 0 - -#/dev/cm206cd b 640 0 0 32 0 0 0 - -#/dev/sjcd b 640 0 0 18 0 0 0 - -#/dev/sonycd b 640 0 0 15 0 0 0 - -#/dev/gscd b 640 0 0 16 0 0 0 - -#/dev/sbpcd b 640 0 0 25 0 0 0 - -#/dev/sbpcd b 640 0 0 25 0 0 1 4 -#/dev/mcd b 640 0 0 23 0 0 0 - -#/dev/optcd b 640 0 0 17 0 0 0 - - diff --git a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 b/target/device/jp/q5/kernel-patches-2.4.26/001-q5 deleted file mode 100644 index 70ca0c555..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 +++ /dev/null @@ -1,730 +0,0 @@ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100 -@@ -16,7 +16,7 @@ all: au1000.o - - O_TARGET := au1000.o - --export-objs = prom.o clocks.o power.o usbdev.o -+export-objs = prom.o clocks.o power.o usbdev.o setup.o - - obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \ - clocks.o power.o setup.o sleeper.o -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100 -@@ -105,42 +105,8 @@ void __init pcibios_fixup(void) - - void __init pcibios_fixup_irqs(void) - { --#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) -- unsigned int slot, func; -- unsigned char pin; -- struct pci_dev *dev; -- -- pci_for_each_dev(dev) { -- if (dev->bus->number != 0) -- return; -- -- dev->irq = 0xff; -- slot = PCI_SLOT(dev->devfn); --#if defined( CONFIG_SOC_AU1500 ) -- switch (slot) { -- case 12: -- case 13: -- default: -- dev->irq = AU1000_PCI_INTA; -- break; -- } --#elif defined( CONFIG_SOC_AU1550 ) -- switch (slot) { -- default: -- case 12: -- dev->irq = AU1000_PCI_INTA; -- break; -- case 13: -- dev->irq = AU1000_PCI_INTB; -- break; -- } --#endif -- -- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -- DBG("slot %d irq %d\n", slot, dev->irq); -- } --#endif - } -+ - unsigned int pcibios_assign_all_busses(void) - { - return 0; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100 -@@ -81,7 +81,7 @@ void prom_init_cmdline(void) - } - - --char *prom_getenv(char *envname) -+char *prom_getenv_n(char *envname, int n) - { - /* - * Return a pointer to the given environment variable. -@@ -89,19 +89,24 @@ char *prom_getenv(char *envname) - */ - - t_env_var *env = (t_env_var *)prom_envp; -- int i; -+ int i, j=0; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { -- return(env->name + strlen(envname) + 1); -+ if(j++ == n) return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); - } - -+char *prom_getenv(char *envname) -+{ -+ return prom_getenv_n(envname, 0); -+} -+ - inline unsigned char str2hexnum(unsigned char c) - { - if(c >= '0' && c <= '9') -@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea, - } - } - --int get_ethernet_addr(char *ethernet_addr) -+int get_ethernet_addr_n(char *ethernet_addr, int n) - { - char *ethaddr_str; - -- ethaddr_str = prom_getenv("ethaddr"); -+ ethaddr_str = prom_getenv_n("ethaddr", n); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - --#if 0 -+#if 1 - { - int i; - -@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add - return 0; - } - -+int get_ethernet_addr(char *ethernet_addr) -+{ -+ return get_ethernet_addr_n(ethernet_addr, 0); -+} -+ - void prom_free_prom_memory (void) {} -+EXPORT_SYMBOL(get_ethernet_addr_n); - EXPORT_SYMBOL(prom_getcmdline); - EXPORT_SYMBOL(get_ethernet_addr); - EXPORT_SYMBOL(str2eaddr); -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100 -@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops; - #endif - - extern struct rtc_ops no_rtc_ops; -+void (*__wbflush) (void); - extern char * __init prom_getcmdline(void); - extern void __init board_setup(void); - extern void au1000_restart(char *); -@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr( - extern void au1xxx_time_init(void); - extern void au1xxx_timer_setup(void); - -+void au1500_wbflush(void) -+{ -+ __asm__ volatile ("sync"); -+} -+ - void __init au1x00_setup(void) - { - char *argptr; -@@ -89,6 +95,8 @@ void __init au1x00_setup(void) - } - #endif - -+ __wbflush = au1500_wbflush; -+ - #ifdef CONFIG_FB_AU1100 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); -@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr( - return phys_addr; - } - #endif -+ -+EXPORT_SYMBOL(__wbflush); -+ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100 -@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, - { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, - - { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S ---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100 -@@ -33,7 +33,9 @@ - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. - */ -- .fill 0x400 -+ j kernel_entry -+ nop -+ .org 0x400 - - /* The following two symbols are used for kernel profiling. */ - EXPORT(stext) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile ---- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200 -@@ -69,13 +69,13 @@ endif - set_gccflags = $(shell \ - while :; do \ - cpu=$(1); isa=-$(2); \ -- for gcc_opt in -march= -mcpu=; do \ -+ for gcc_opt in -march=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ - done; \ - cpu=$(3); isa=-$(4); \ -- for gcc_opt in -march= -mcpu=; do \ -+ for gcc_opt in -march=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ -@@ -90,7 +90,7 @@ else \ - fi; \ - gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ - while :; do \ -- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ -+ for gas_opt in -Wa,-march=; do \ - $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ - -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ - break 2; \ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c ---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100 -@@ -29,6 +29,7 @@ - #include <linux/errno.h> - #include <linux/init.h> - #include <linux/input.h> -+#include <linux/pm.h> - - void kbd_leds(unsigned char leds) - { -@@ -140,3 +141,46 @@ void __init kbd_init_hw(void) - { - printk("Dummy keyboard driver installed.\n"); - } -+ -+ -+void panic_blink(void) -+ { -+ } -+ -+ -+ int pckbd_translate(unsigned char scancode, unsigned char *keycode, -+ char raw_mode) -+ { -+ return 0; -+ } -+ -+ char pckbd_unexpected_up(unsigned char keycode) -+ { -+ return 0; -+ } -+ -+ -+ void pckbd_leds(unsigned char leds) -+ { -+ } -+ -+ -+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode) -+ { -+ return 0; -+ } -+ -+ int pckbd_getkeycode(unsigned int scancode) -+ { -+ return 0; -+ } -+ -+ void __init pckbd_init_hw(void) -+ { -+ } -+ -+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) -+ { -+ return 0; -+ } -+ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile ---- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100 -@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4. - list-multi := - - KEYMAP =defkeymap.o --KEYBD =pc_keyb.o -+KEYBD =dummy_keyb.o - CONSOLE =console.o - SERIAL =serial.o - -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100 -@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i - or tells us why it failed. */ - dq6 = CMD(1<<6); - dq5 = CMD(1<<5); -- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ -+ timeo = jiffies + HZ; /* setting timeout to 1ms for now */ - - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); -@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); - -- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { -- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); -- } else { -+ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) { - /* DQ5 is active so we can do a reset and stop the erase */ - cfi_write(map, CMD(0xF0), chip->start); - printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c ---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100 -@@ -86,28 +86,24 @@ static int mtd_parts_n - #else - static struct mtd_partition physmap_partitions[] = { - /* Put your own partition definitions here */ --#if 0 - { -- name: "bootROM", -- size: 0x80000, -+ name: "fs1", -+ size: 28*1024*1024, - offset: 0, -- mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "zImage", -- size: 0x100000, -+ name: "bootldr", -+ size: 128*1024, - offset: MTDPART_OFS_APPEND, - mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "ramdisk.gz", -- size: 0x300000, -+ name: "kernel", -+ size: 1*1024*1024, - offset: MTDPART_OFS_APPEND, -- mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "User FS", -+ name: "fs2", - size: MTDPART_SIZ_FULL, - offset: MTDPART_OFS_APPEND, - } --#endif - }; - - #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition)) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c ---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100 -@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether - extern inline void str2eaddr(unsigned char *ea, unsigned char *str); - extern inline unsigned char str2hexnum(unsigned char c); - extern char * __init prom_getcmdline(void); -+extern int get_ethernet_addr_n(char *ethernet_addr, int n); - - /* - * Theory of operation -@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de - return 0; - } - -+int ns_83847_reset(struct net_device *dev, int phy_addr) -+ { -+ s16 mii_control, timeout; -+ -+ // printk("ns_reset\n"); -+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); -+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); -+ mdelay(1); -+ for (timeout = 100; timeout > 0; --timeout) { -+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); -+ if ((mii_control & MII_CNTL_RESET) == 0) -+ break; -+ mdelay(1); -+ } -+ if (mii_control & MII_CNTL_RESET) { -+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); -+ return -1; -+ } -+ return 0; -+ } -+ -+int ns_83847_init(struct net_device *dev, int phy_addr) -+ { -+ s16 data; -+ // printk("ns_init\n"); -+ -+ /* Stop auto-negotiation */ -+ // data = mdio_read(dev, phy_addr, MII_CONTROL); -+ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); -+ // mdio_write(dev, phy_addr, 0, 0x0000); -+ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */); -+ -+ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */ -+ data = mdio_read(dev, phy_addr, MII_ANADV); -+ /* obs PAUSE bit */ -+ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ; -+ mdio_write(dev, phy_addr, MII_ANADV, data); -+ -+ /* Bypass led stretching? */ -+ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL); -+ data |= MII_NS_PHYCTRL_BP_STRETCH; -+ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data); -+ -+ /* Restart auto-negotiation */ -+ data = mdio_read(dev, phy_addr, MII_CONTROL); -+ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; -+ mdio_write(dev, phy_addr, MII_CONTROL, data); -+ -+ return 0; -+ } -+ -+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -+ { -+ u16 mii_data; -+ struct au1000_private *aup; -+ -+ if (!dev) { -+ printk(KERN_ERR "ns_83847_status error: NULL dev\n"); -+ return -1; -+ } -+ aup = (struct au1000_private *) dev->priv; -+ -+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); -+ // printk("ns_status: %04x\n", mii_data); -+ if (mii_data & MII_STAT_LINK) { -+ *link = 1; -+ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS); -+ if (mii_data & MII_NS_PHYSTS_SPEED_10) { -+ *speed = IF_PORT_10BASET; -+ dev->if_port = IF_PORT_10BASET; -+ } -+ else { -+ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) { -+ *speed = IF_PORT_100BASEFX; -+ dev->if_port = IF_PORT_100BASEFX; -+ } -+ else { -+ *speed = IF_PORT_100BASETX; -+ dev->if_port = IF_PORT_100BASETX; -+ } -+ } -+ -+ } -+ else { -+ *link = 0; -+ *speed = 0; -+ dev->if_port = IF_PORT_UNKNOWN; -+ } -+ return 0; -+ } -+ -+ -+ - #ifdef CONFIG_MIPS_BOSPORUS - int stub_init(struct net_device *dev, int phy_addr) - { -@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int - } - #endif - -+struct phy_ops ns_83847_ops = { -+ ns_83847_init, -+ ns_83847_reset, -+ ns_83847_status, -+}; -+ - struct phy_ops bcm_5201_ops = { - bcm_5201_init, - bcm_5201_reset, -@@ -667,6 +767,7 @@ static struct mii_chip_info { - struct phy_ops *phy_ops; - int dual_phy; - } mii_chip_table[] = { -+ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops }, - {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, - {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, - {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, -@@ -868,6 +969,8 @@ static int mii_probe (struct net_device - } - } - } -+ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name); -+ return -1; - found: - - #ifdef CONFIG_MIPS_BOSPORUS -@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po - switch (ioaddr) { - case AU1000_ETH0_BASE: - case AU1500_ETH0_BASE: -- /* check env variables first */ - if (!get_ethernet_addr(ethaddr)) { - memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); - } else { -- /* Check command line */ -- argptr = prom_getcmdline(); -- if ((pmac = strstr(argptr, "ethaddr=")) == NULL) { -- printk(KERN_INFO "%s: No mac address found\n", -- dev->name); -- /* use the hard coded mac addresses */ -- } else { -- str2eaddr(ethaddr, pmac + strlen("ethaddr=")); -- memcpy(au1000_mac_addr, ethaddr, -- sizeof(dev->dev_addr)); -- } -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); - } - if (ioaddr == AU1000_ETH0_BASE) - aup->enable = (volatile u32 *) -@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po - - case AU1000_ETH1_BASE: - case AU1500_ETH1_BASE: -+ if (!get_ethernet_addr_n(ethaddr, 1)) { -+ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); -+ } else { -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); -+ } - if (ioaddr == AU1000_ETH1_BASE) - aup->enable = (volatile u32 *) - ((unsigned long)AU1000_MAC1_ENABLE); -@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po - aup->enable = (volatile u32 *) - ((unsigned long)AU1500_MAC1_ENABLE); - memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr)); -- dev->dev_addr[4] += 0x10; - setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR); - aup->mac_id = 1; - au_macs[1] = aup; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h ---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100 -@@ -86,6 +86,28 @@ - #define MII_STAT_CAN_TX_FDX 0x4000 - #define MII_STAT_CAN_T4 0x8000 - -+/* mii registers for NS 83847 */ -+#define MII_NS_PHYSTS 0x10 -+#define MII_NS_FCSCR 0x14 -+#define MII_NS_RECR 0x15 -+#define MII_NS_PCSR 0x16 -+#define MII_NS_PHYCTRL 0x19 -+#define MII_NS_10BTSCR 0x1a -+#define MII_NS_CDCTRL 0x1b -+ -+/* MII_NS_PHYSTS bits */ -+#define MII_NS_PHYSTS_LINK (1) -+#define MII_NS_PHYSTS_SPEED_10 (1<<1) -+#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2) -+ -+/* MII_NS_PHYCTRL bits */ -+#define MII_NS_PHYCTRL_BP_STRETCH (1<<8) -+ -+/* MII_NS_CDCTRL bits */ -+#define MII_NS_CDCTRL_CD_ENABLE (1<<15) -+#define MII_NS_CDCTRL_RISETIME (1<<11) -+#define MII_NS_CDCTRL_FALLTIME (1<<9) -+ - - #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ - #define MII_ID1_MODEL 0x03F0 /* model number */ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c ---- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200 -@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str - goto err_ioremap; - } - -- /* Work around the dropped serial bit. */ -+#ifdef __mips__ -+ if (get_ethernet_addr_n(dev->dev_addr, 2)) { -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); -+ } -+#else - prev_eedata = eeprom_read(ioaddr, 6); - for (i = 0; i < 3; i++) { - int eedata = eeprom_read(ioaddr, i + 7); -@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str - dev->dev_addr[i*2+1] = eedata >> 7; - prev_eedata = eedata; - } -+#endif - - dev->base_addr = ioaddr; - dev->irq = irq; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h ---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100 -@@ -302,9 +302,9 @@ typedef struct hermes_response { - #define hermes_read_reg(hw, off) ((hw)->io_space ? \ - inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ - readw((hw)->iobase + ( (off) << (hw)->reg_spacing ))) --#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \ -- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ -- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ))) -+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \ -+ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \ -+ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));} - - #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name)) - #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val))) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h ---- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100 -@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] - #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 - - /* Interrupt Numbers */ --#define AU1000_UART0_INT 0 -+#define AU1000_UART0_INT 3 - #define AU1000_UART1_INT 1 /* au1000 */ - #define AU1000_UART2_INT 2 /* au1000 */ - - #define AU1000_PCI_INTA 1 /* au1500 */ - #define AU1000_PCI_INTB 2 /* au1500 */ - --#define AU1000_UART3_INT 3 -+#define AU1000_UART3_INT 0 - - #define AU1000_SSI0_INT 4 /* au1000 */ - #define AU1000_SSI1_INT 5 /* au1000 */ -@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] - - - /* UARTS 0-3 */ --#define UART0_ADDR 0xB1100000 -+#define UART0_ADDR 0xB1400000 - #define UART1_ADDR 0xB1200000 - #define UART2_ADDR 0xB1300000 --#define UART3_ADDR 0xB1400000 -+#define UART3_ADDR 0xB1100000 - #define UART_BASE UART0_ADDR --#define UART_DEBUG_BASE UART3_ADDR -+#define UART_DEBUG_BASE UART0_ADDR - - #define UART_RX 0 /* Receive buffer */ - #define UART_TX 4 /* Transmit buffer */ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h ---- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100 -@@ -13,7 +13,6 @@ - #include <linux/config.h> - #include <asm/break.h> - --#ifdef __KERNEL__ - - /* - * PAGE_SHIFT determines the page size -@@ -30,6 +29,7 @@ - #define PAGE_SIZE (1L << PAGE_SHIFT) - #define PAGE_MASK (~(PAGE_SIZE-1)) - -+#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ - - #include <asm/cacheflush.h> -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h ---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100 -@@ -15,8 +15,11 @@ - - #ifdef CONFIG_CPU_HAS_WB - --extern void (*__wbflush)(void); --extern void wbflush_setup(void); -+//extern void (*__wbflush)(void); -+//extern void wbflush_setup(void); -+ -+ -+#define __wbflush() { __asm__ volatile ("sync"); } - - #define wbflush() \ - do { \ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h ---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100 -@@ -37,6 +37,7 @@ - #endif - - #if defined(__arm__) || defined(__mips__) -+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus - typedef u_int ioaddr_t; - #else - typedef u_short ioaddr_t; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h ---- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100 -@@ -112,7 +112,7 @@ typedef struct pccard_mem_map { - u_char map; - u_char flags; - u_short speed; -- u_long sys_start, sys_stop; -+ ioaddr_t sys_start, sys_stop; - u_int card_start; - } pccard_mem_map; - -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c ---- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100 -+++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100 -@@ -760,8 +760,6 @@ static void __init devfs_make_root(char - static void __init mount_root(void) - { - #ifdef CONFIG_ROOT_NFS -- if (MAJOR(ROOT_DEV) == NFS_MAJOR -- && MINOR(ROOT_DEV) == NFS_MINOR) { - if (mount_nfs_root()) { - sys_chdir("/root"); - ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev; -@@ -770,7 +768,6 @@ static void __init mount_root(void) - } - printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); - ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0); -- } - #endif - devfs_make_root(root_device_name); - create_dev("/dev/root", ROOT_DEV, root_device_name); - diff --git a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes deleted file mode 100644 index a5928504e..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes +++ /dev/null @@ -1,81 +0,0 @@ -diff -Naur linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c linux-2.4.26-q5/arch/mips/au1000/common/clocks.c ---- linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c 2003-08-25 07:44:39.000000000 -0400 -+++ linux-2.4.26-q5/arch/mips/au1000/common/clocks.c 2005-06-23 02:52:03.390000000 -0400 -@@ -85,9 +85,8 @@ - lcd_clock = sys_busclk / 4; - - if (lcd_clock > 50000) /* Epson MAX */ -- printk(__FUNCTION__ -- ": warning: LCD clock too high (%d KHz)\n", -- lcd_clock); -+ printk("%s: warning: LCD clock too high (%d KHz)\n", -+ __FUNCTION__, lcd_clock); - } - - unsigned int get_au1x00_lcd_clock(void) ---- linux-2.4.26-q5.org/arch/mips/kernel/time.c 2004-02-18 08:36:30.000000000 -0500 -+++ linux-2.4.26-q5/arch/mips/kernel/time.c 2005-06-23 03:13:07.720000000 -0400 -@@ -25,6 +25,7 @@ - #include <linux/interrupt.h> - #include <linux/module.h> - -+#include <asm/compiler.h> - #include <asm/bootinfo.h> - #include <asm/cpu.h> - #include <asm/time.h> -@@ -242,7 +243,7 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (sll32_usecs_per_cycle) -- : "lo", "accum"); -+ : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -297,7 +298,7 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) -- : "lo", "accum"); -+ : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -339,7 +340,7 @@ - : "r" (timerhi), "m" (timerlo), - "r" (tmp), "r" (USECS_PER_JIFFY), - "r" (USECS_PER_JIFFY_FRAC) -- : "hi", "lo", "accum"); -+ : "hi", "lo", GCC_REG_ACCUM); - cached_quotient = quotient; - } - } -@@ -353,7 +354,7 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) -- : "lo", "accum"); -+ : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to checkdiff -Naur linux-2.4.26-q5.org/include/asm-mips/compiler.h linux-2.4.26-q5/include/asm-mips/compiler.h ---- linux-2.4.26-q5.org/include/asm-mips/compiler.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.26-q5/include/asm-mips/compiler.h 2005-06-23 02:52:25.000000000 -0400 -@@ -0,0 +1,17 @@ -+/* -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ */ -+#ifndef _ASM_COMPILER_H -+#define _ASM_COMPILER_H -+ -+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) -+#define GCC_REG_ACCUM "$0" -+#else -+#define GCC_REG_ACCUM "accum" -+#endif -+ -+#endif /* _ASM_COMPILER_H */ diff --git a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain deleted file mode 100644 index 53e509d3a..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain +++ /dev/null @@ -1,24 +0,0 @@ ---- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700 -+++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700 -@@ -17,16 +17,16 @@ - # Select the object file format to substitute into the linker script. - # - ifdef CONFIG_CPU_LITTLE_ENDIAN --tool-prefix = mipsel-linux- -+#tool-prefix = mipsel-linux- - ld-emul = elf32ltsmip - else --tool-prefix = mips-linux- -+#tool-prefix = mips-linux- - ld-emul = elf32btsmip - endif - --ifdef CONFIG_CROSSCOMPILE --CROSS_COMPILE = $(tool-prefix) --endif -+#ifdef CONFIG_CROSSCOMPILE -+#CROSS_COMPILE = $(tool-prefix) -+#endif - - MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot - diff --git a/target/device/jp/q5/kernel-patches-2.4.26/100-version b/target/device/jp/q5/kernel-patches-2.4.26/100-version deleted file mode 100644 index 813d45f15..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.26/100-version +++ /dev/null @@ -1,11 +0,0 @@ ---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 -+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 -@@ -1,7 +1,7 @@ - VERSION = 2 - PATCHLEVEL = 4 - SUBLEVEL = 26 --EXTRAVERSION = -+EXTRAVERSION =-q5 - - KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) - diff --git a/target/device/jp/q5/kernel-patches-2.4.29/001-q5 b/target/device/jp/q5/kernel-patches-2.4.29/001-q5 deleted file mode 100644 index 5f1af425a..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.29/001-q5 +++ /dev/null @@ -1,420 +0,0 @@ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100 -@@ -16,7 +16,7 @@ all: au1000.o - - O_TARGET := au1000.o - --export-objs = prom.o clocks.o power.o usbdev.o -+export-objs = prom.o clocks.o power.o usbdev.o setup.o - - obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \ - clocks.o power.o setup.o sleeper.o -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100 -@@ -81,7 +81,7 @@ void prom_init_cmdline(void) - } - - --char *prom_getenv(char *envname) -+char *prom_getenv_n(char *envname, int n) - { - /* - * Return a pointer to the given environment variable. -@@ -89,19 +89,24 @@ char *prom_getenv(char *envname) - */ - - t_env_var *env = (t_env_var *)prom_envp; -- int i; -+ int i, j=0; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { -- return(env->name + strlen(envname) + 1); -+ if(j++ == n) return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); - } - -+char *prom_getenv(char *envname) -+{ -+ return prom_getenv_n(envname, 0); -+} -+ - inline unsigned char str2hexnum(unsigned char c) - { - if(c >= '0' && c <= '9') -@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea, - } - } - --int get_ethernet_addr(char *ethernet_addr) -+int get_ethernet_addr_n(char *ethernet_addr, int n) - { - char *ethaddr_str; - -- ethaddr_str = prom_getenv("ethaddr"); -+ ethaddr_str = prom_getenv_n("ethaddr", n); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - --#if 0 -+#if 1 - { - int i; - -@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add - return 0; - } - -+int get_ethernet_addr(char *ethernet_addr) -+{ -+ return get_ethernet_addr_n(ethernet_addr, 0); -+} -+ - void prom_free_prom_memory (void) {} -+EXPORT_SYMBOL(get_ethernet_addr_n); - EXPORT_SYMBOL(prom_getcmdline); - EXPORT_SYMBOL(get_ethernet_addr); - EXPORT_SYMBOL(str2eaddr); -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c ---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100 -@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops; - #endif - - extern struct rtc_ops no_rtc_ops; -+void (*__wbflush) (void); - extern char * __init prom_getcmdline(void); - extern void __init board_setup(void); - extern void au1000_restart(char *); -@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr( - extern void au1xxx_time_init(void); - extern void au1xxx_timer_setup(void); - -+void au1500_wbflush(void) -+{ -+ __asm__ volatile ("sync"); -+} -+ - void __init au1x00_setup(void) - { - char *argptr; -@@ -89,6 +95,8 @@ void __init au1x00_setup(void) - } - #endif - -+ __wbflush = au1500_wbflush; -+ - #ifdef CONFIG_FB_AU1100 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); -@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr( - return phys_addr; - } - #endif -+ -+EXPORT_SYMBOL(__wbflush); -+ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S ---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100 -@@ -33,7 +33,9 @@ - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. - */ -- .fill 0x400 -+ j kernel_entry -+ nop -+ .org 0x400 - - /* The following two symbols are used for kernel profiling. */ - EXPORT(stext) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile ---- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100 -+++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200 -@@ -69,13 +69,13 @@ endif - set_gccflags = $(shell \ - while :; do \ - cpu=$(1); isa=-$(2); \ -- for gcc_opt in -march= -mcpu=; do \ -+ for gcc_opt in -march=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ - done; \ - cpu=$(3); isa=-$(4); \ -- for gcc_opt in -march= -mcpu=; do \ -+ for gcc_opt in -march=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ -@@ -90,7 +90,7 @@ else \ - fi; \ - gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ - while :; do \ -- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ -+ for gas_opt in -Wa,-march=; do \ - $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ - -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ - break 2; \ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c ---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100 -@@ -29,6 +29,7 @@ - #include <linux/errno.h> - #include <linux/init.h> - #include <linux/input.h> -+#include <linux/pm.h> - - void kbd_leds(unsigned char leds) - { -@@ -140,3 +141,46 @@ void __init kbd_init_hw(void) - { - printk("Dummy keyboard driver installed.\n"); - } -+ -+ -+void panic_blink(void) -+ { -+ } -+ -+ -+ int pckbd_translate(unsigned char scancode, unsigned char *keycode, -+ char raw_mode) -+ { -+ return 0; -+ } -+ -+ char pckbd_unexpected_up(unsigned char keycode) -+ { -+ return 0; -+ } -+ -+ -+ void pckbd_leds(unsigned char leds) -+ { -+ } -+ -+ -+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode) -+ { -+ return 0; -+ } -+ -+ int pckbd_getkeycode(unsigned int scancode) -+ { -+ return 0; -+ } -+ -+ void __init pckbd_init_hw(void) -+ { -+ } -+ -+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) -+ { -+ return 0; -+ } -+ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile ---- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100 -@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4. - list-multi := - - KEYMAP =defkeymap.o --KEYBD =pc_keyb.o -+KEYBD =dummy_keyb.o - CONSOLE =console.o - SERIAL =serial.o - -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100 -@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i - or tells us why it failed. */ - dq6 = CMD(1<<6); - dq5 = CMD(1<<5); -- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ -+ timeo = jiffies + HZ; /* setting timeout to 1ms for now */ - - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); -@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); - -- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { -- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); -- } else { -+ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) { - /* DQ5 is active so we can do a reset and stop the erase */ - cfi_write(map, CMD(0xF0), chip->start); - printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c ---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100 -@@ -86,28 +86,24 @@ static int mtd_parts_n - #else - static struct mtd_partition physmap_partitions[] = { - /* Put your own partition definitions here */ --#if 0 - { -- name: "bootROM", -- size: 0x80000, -+ name: "fs1", -+ size: 28*1024*1024, - offset: 0, -- mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "zImage", -- size: 0x100000, -+ name: "bootldr", -+ size: 128*1024, - offset: MTDPART_OFS_APPEND, - mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "ramdisk.gz", -- size: 0x300000, -+ name: "kernel", -+ size: 1*1024*1024, - offset: MTDPART_OFS_APPEND, -- mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { -- name: "User FS", -+ name: "fs2", - size: MTDPART_SIZ_FULL, - offset: MTDPART_OFS_APPEND, - } --#endif - }; - - #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition)) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c ---- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200 -@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str - goto err_ioremap; - } - -- /* Work around the dropped serial bit. */ -+#ifdef __mips__ -+ if (get_ethernet_addr_n(dev->dev_addr, 2)) { -+ printk(KERN_INFO "%s: No mac address found\n", dev->name); -+ } -+#else - prev_eedata = eeprom_read(ioaddr, 6); - for (i = 0; i < 3; i++) { - int eedata = eeprom_read(ioaddr, i + 7); -@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str - dev->dev_addr[i*2+1] = eedata >> 7; - prev_eedata = eedata; - } -+#endif - - dev->base_addr = ioaddr; - dev->irq = irq; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h ---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100 -+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100 -@@ -302,9 +302,9 @@ typedef struct hermes_response { - #define hermes_read_reg(hw, off) ((hw)->io_space ? \ - inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ - readw((hw)->iobase + ( (off) << (hw)->reg_spacing ))) --#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \ -- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ -- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ))) -+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \ -+ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \ -+ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));} - - #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name)) - #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val))) -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h ---- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100 -@@ -13,7 +13,6 @@ - #include <linux/config.h> - #include <asm/break.h> - --#ifdef __KERNEL__ - - /* - * PAGE_SHIFT determines the page size -@@ -30,6 +29,7 @@ - #define PAGE_SIZE (1L << PAGE_SHIFT) - #define PAGE_MASK (~(PAGE_SIZE-1)) - -+#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ - - #include <asm/cacheflush.h> -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h ---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100 -@@ -15,8 +15,11 @@ - - #ifdef CONFIG_CPU_HAS_WB - --extern void (*__wbflush)(void); --extern void wbflush_setup(void); -+//extern void (*__wbflush)(void); -+//extern void wbflush_setup(void); -+ -+ -+#define __wbflush() { __asm__ volatile ("sync"); } - - #define wbflush() \ - do { \ -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h ---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100 -@@ -37,6 +37,7 @@ - #endif - - #if defined(__arm__) || defined(__mips__) -+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus - typedef u_int ioaddr_t; - #else - typedef u_short ioaddr_t; -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h ---- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100 -+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100 -@@ -112,7 +112,7 @@ typedef struct pccard_mem_map { - u_char map; - u_char flags; - u_short speed; -- u_long sys_start, sys_stop; -+ ioaddr_t sys_start, sys_stop; - u_int card_start; - } pccard_mem_map; - -diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c ---- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100 -+++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100 -@@ -760,8 +760,6 @@ static void __init devfs_make_root(char - static void __init mount_root(void) - { - #ifdef CONFIG_ROOT_NFS -- if (MAJOR(ROOT_DEV) == NFS_MAJOR -- && MINOR(ROOT_DEV) == NFS_MINOR) { - if (mount_nfs_root()) { - sys_chdir("/root"); - ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev; -@@ -770,7 +768,6 @@ static void __init mount_root(void) - } - printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); - ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0); -- } - #endif - devfs_make_root(root_device_name); - create_dev("/dev/root", ROOT_DEV, root_device_name); - diff --git a/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain deleted file mode 100644 index 53e509d3a..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain +++ /dev/null @@ -1,24 +0,0 @@ ---- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700 -+++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700 -@@ -17,16 +17,16 @@ - # Select the object file format to substitute into the linker script. - # - ifdef CONFIG_CPU_LITTLE_ENDIAN --tool-prefix = mipsel-linux- -+#tool-prefix = mipsel-linux- - ld-emul = elf32ltsmip - else --tool-prefix = mips-linux- -+#tool-prefix = mips-linux- - ld-emul = elf32btsmip - endif - --ifdef CONFIG_CROSSCOMPILE --CROSS_COMPILE = $(tool-prefix) --endif -+#ifdef CONFIG_CROSSCOMPILE -+#CROSS_COMPILE = $(tool-prefix) -+#endif - - MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot - diff --git a/target/device/jp/q5/kernel-patches-2.4.29/100-version b/target/device/jp/q5/kernel-patches-2.4.29/100-version deleted file mode 100644 index 7e420d1ff..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.29/100-version +++ /dev/null @@ -1,11 +0,0 @@ ---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 -+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 -@@ -1,7 +1,7 @@ - VERSION = 2 - PATCHLEVEL = 4 - SUBLEVEL = 29 --EXTRAVERSION = -+EXTRAVERSION =-q5 - - KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) - diff --git a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 b/target/device/jp/q5/kernel-patches-2.4.32/001-q5 deleted file mode 100644 index 1e2718a7a..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 +++ /dev/null @@ -1,342 +0,0 @@ -diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile ---- linux-2.4.31.org/arch/mips/Makefile 2005-01-19 09:09:26.000000000 -0500 -+++ linux-2.4.31/arch/mips/Makefile 2005-09-10 17:29:44.000000000 -0400 -@@ -241,6 +241,16 @@ - endif - - # -+# jp-embedded Q5 board -+# -+ifdef CONFIG_MIPS_Q5 -+LIBS += arch/mips/jp-embedded/q5/q5.o \ -+ arch/mips/au1000/common/au1000.o -+SUBDIRS += arch/mips/jp-embedded/q5 arch/mips/au1000/common -+LOADADDR := 0x80100000 -+endif -+ -+# - # Au1x00 (AMD/Alchemy) eval boards - # - ifdef CONFIG_MIPS_DB1000 -diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c ---- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c 2005-01-19 09:09:26.000000000 -0500 -+++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c 2005-09-10 17:47:29.000000000 -0400 -@@ -101,7 +101,7 @@ - - void __init pcibios_fixup_irqs(void) - { --#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) -+#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 ) - unsigned int slot; - unsigned char pin; - struct pci_dev *dev; -diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in ---- linux-2.4.31.org/arch/mips/config-shared.in 2005-01-19 09:09:27.000000000 -0500 -+++ linux-2.4.31/arch/mips/config-shared.in 2005-08-23 00:30:32.000000000 -0400 -@@ -31,6 +31,7 @@ - dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 -+dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32 - dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32 - dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32 - dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32 -@@ -277,6 +278,12 @@ - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi -+if [ "$CONFIG_MIPS_Q5" = "y" ]; then -+ define_bool CONFIG_SOC_AU1X00 y -+ define_bool CONFIG_SOC_AU1500 y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_PC_KEYB y -+fi - if [ "$CONFIG_MIPS_DB1000" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1000 y -@@ -729,6 +736,7 @@ - "$CONFIG_MIPS_PB1000" = "y" -o \ - "$CONFIG_MIPS_PB1100" = "y" -o \ - "$CONFIG_MIPS_PB1500" = "y" -o \ -+ "$CONFIG_MIPS_Q5" = "y" -o \ - "$CONFIG_NEC_OSPREY" = "y" -o \ - "$CONFIG_NEC_EAGLE" = "y" -o \ - "$CONFIG_NINO" = "y" -o \ -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile 2005-09-10 16:46:20.000000000 -0400 -@@ -0,0 +1,9 @@ -+USE_STANDARD_AS_RULE := true -+ -+O_TARGET := q5.o -+ -+export-objs = init.o -+ -+obj-y := init.o board_setup.o irqmap.o -+ -+include $(TOPDIR)/Rules.make -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c 2005-08-30 14:46:21.000000000 -0400 -@@ -0,0 +1,97 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * jp-embedded Q5 board setup. -+ * -+ * Author: jp@jp-embedded.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/ioport.h> -+#include <linux/mm.h> -+#include <linux/console.h> -+#include <linux/mc146818rtc.h> -+#include <linux/delay.h> -+ -+#include <asm/cpu.h> -+#include <asm/bootinfo.h> -+#include <asm/irq.h> -+#include <asm/keyboard.h> -+#include <asm/mipsregs.h> -+#include <asm/reboot.h> -+#include <asm/pgtable.h> -+#include <asm/au1000.h> -+#include <asm/pb1500.h> -+ -+#ifdef CONFIG_USB_OHCI -+// Enable the workaround for the OHCI DoneHead -+// register corruption problem. -+#define CONFIG_AU1000_OHCI_FIX -+#endif -+ -+#ifdef CONFIG_RTC -+extern struct rtc_ops pb1500_rtc_ops; -+#endif -+ -+void board_reset (void) -+{ -+ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */ -+ au_writel(0x00000000, 0xAE00001C); -+} -+ -+void __init board_setup(void) -+{ -+ u32 pin_func; -+ u32 sys_freqctrl, sys_clksrc; -+ -+#ifdef CONFIG_PCI -+ // Setup PCI bus controller -+ au_writel(0, Au1500_PCI_CMEM); -+ au_writel(0x00003fff, Au1500_CFG_BASE); -+ au_writel(0xf, Au1500_PCI_CFG); -+ au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); -+ au_writel(0, Au1500_PCI_MWBASE_REV_CCL); -+ au_writel(0x02a00356, Au1500_PCI_STATCMD); -+ au_writel(0x00003c04, Au1500_PCI_HDRTYPE); -+ au_writel(0x00000008, Au1500_PCI_MBAR); -+ au_sync(); -+#endif -+ -+ /* Enable sys bus clock divider when IDLE state or no bus activity. */ -+ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); -+ -+#ifdef CONFIG_RTC -+ rtc_ops = &pb1500_rtc_ops; -+ // Enable the RTC if not already enabled -+ if (!(au_readl(0xac000028) & 0x20)) { -+ printk("enabling clock ...\n"); -+ au_writel((au_readl(0xac000028) | 0x20), 0xac000028); -+ } -+ // Put the clock in BCD mode -+ if (readl(0xac00002C) & 0x4) { /* reg B */ -+ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); -+ au_sync(); -+ } -+#endif -+} -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c 2005-09-10 16:43:21.000000000 -0400 -@@ -0,0 +1,80 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * jp-embedded Q5 board setup. -+ * -+ * Author: jp@jp-embedded.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/sched.h> -+#include <linux/bootmem.h> -+#include <asm/addrspace.h> -+#include <asm/bootinfo.h> -+#include <linux/string.h> -+#include <linux/kernel.h> -+#include <linux/sched.h> -+ -+int prom_argc; -+char **prom_argv, **prom_envp; -+extern void __init prom_init_cmdline(void); -+extern char *prom_getenv(char *envname); -+void (*__wbflush) (void); -+ -+void au1500_wbflush(void) -+{ -+ __asm__ volatile ("sync"); -+} -+ -+const char *get_system_type(void) -+{ -+ return "jp-embedded Q5"; -+} -+ -+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) -+{ -+ unsigned char *memsize_str; -+ unsigned long memsize; -+ -+ prom_argc = argc; -+ prom_argv = argv; -+ prom_envp = envp; -+ -+ __wbflush = au1500_wbflush; -+ -+ /* obs */ -+ mips_machgroup = MACH_GROUP_ALCHEMY; -+ mips_machtype = MACH_PB1500; -+ -+ prom_init_cmdline(); -+ memsize_str = prom_getenv("memsize"); -+ if (!memsize_str) { -+ memsize = 0x04000000; -+ } else { -+ memsize = simple_strtol(memsize_str, NULL, 0); -+ } -+ add_memory_region(0, memsize, BOOT_MEM_RAM); -+ return 0; -+} -+ -+EXPORT_SYMBOL(__wbflush); -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c 2005-09-10 16:45:18.000000000 -0400 -@@ -0,0 +1,61 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * jp-embedded Q5 board setup. -+ * -+ * Author: jp@jp-embedded.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+#include <linux/kernel_stat.h> -+#include <linux/module.h> -+#include <linux/signal.h> -+#include <linux/sched.h> -+#include <linux/types.h> -+#include <linux/interrupt.h> -+#include <linux/ioport.h> -+#include <linux/timex.h> -+#include <linux/slab.h> -+#include <linux/random.h> -+#include <linux/delay.h> -+ -+#include <asm/bitops.h> -+#include <asm/bootinfo.h> -+#include <asm/io.h> -+#include <asm/mipsregs.h> -+#include <asm/system.h> -+#include <asm/au1000.h> -+ -+au1xxx_irq_map_t au1xxx_irq_map[] = { -+ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, -+ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, -+ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, -+}; -+ -+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); -+ ---- linux-2.4.31.org/Documentation/Configure.help 2005-04-03 21:42:19.000000000 -0400 -+++ linux-2.4.31/Documentation/Configure.help 2005-09-10 18:50:14.340000000 -0400 -@@ -2197,6 +2197,12 @@ - MIPS-32-based Baget embedded system. This chipset is better known - via the NE2100 cards. - -+jp-embedded Q5 support -+CONFIG_MIPS_Q5 -+ This enables support for jp-embedded's MIPS based boards. The -+ boards uses the AU1500 cpu. For more information about these -+ boards, see <http://www.jp-embedded.com/>. -+ - Support for DECstations - CONFIG_DECSTATION - This enables support for DEC's MIPS based workstations. For details diff --git a/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 b/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 deleted file mode 100644 index 9d0d80d96..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 +++ /dev/null @@ -1,162 +0,0 @@ -diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c ---- linux-2.4.31.org/drivers/net/au1000_eth.c 2005-01-19 09:09:56.000000000 -0500 -+++ linux-2.4.31/drivers/net/au1000_eth.c 2005-08-22 12:24:31.000000000 -0400 -@@ -595,6 +595,97 @@ - return 0; - } - -+int ns_83847_reset(struct net_device *dev, int phy_addr) -+ { -+ s16 mii_control, timeout; -+ -+ // printk("ns_reset\n"); -+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); -+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); -+ mdelay(1); -+ for (timeout = 100; timeout > 0; --timeout) { -+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); -+ if ((mii_control & MII_CNTL_RESET) == 0) -+ break; -+ mdelay(1); -+ } -+ if (mii_control & MII_CNTL_RESET) { -+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); -+ return -1; -+ } -+ return 0; -+ } -+ -+int ns_83847_init(struct net_device *dev, int phy_addr) -+ { -+ s16 data; -+ // printk("ns_init\n"); -+ -+ /* Stop auto-negotiation */ -+ // data = mdio_read(dev, phy_addr, MII_CONTROL); -+ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); -+ // mdio_write(dev, phy_addr, 0, 0x0000); -+ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */); -+ -+ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */ -+ data = mdio_read(dev, phy_addr, MII_ANADV); -+ /* obs PAUSE bit */ -+ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ; -+ mdio_write(dev, phy_addr, MII_ANADV, data); -+ -+ /* Bypass led stretching? */ -+ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL); -+ data |= MII_NS_PHYCTRL_BP_STRETCH; -+ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data); -+ -+ /* Restart auto-negotiation */ -+ data = mdio_read(dev, phy_addr, MII_CONTROL); -+ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; -+ mdio_write(dev, phy_addr, MII_CONTROL, data); -+ -+ return 0; -+ } -+ -+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -+ { -+ u16 mii_data; -+ struct au1000_private *aup; -+ -+ if (!dev) { -+ printk(KERN_ERR "ns_83847_status error: NULL dev\n"); -+ return -1; -+ } -+ aup = (struct au1000_private *) dev->priv; -+ -+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); -+ // printk("ns_status: %04x\n", mii_data); -+ if (mii_data & MII_STAT_LINK) { -+ *link = 1; -+ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS); -+ if (mii_data & MII_NS_PHYSTS_SPEED_10) { -+ *speed = IF_PORT_10BASET; -+ dev->if_port = IF_PORT_10BASET; -+ } -+ else { -+ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) { -+ *speed = IF_PORT_100BASEFX; -+ dev->if_port = IF_PORT_100BASEFX; -+ } -+ else { -+ *speed = IF_PORT_100BASETX; -+ dev->if_port = IF_PORT_100BASETX; -+ } -+ } -+ -+ } -+ else { -+ *link = 0; -+ *speed = 0; -+ dev->if_port = IF_PORT_UNKNOWN; -+ } -+ return 0; -+ } -+ - #ifdef CONFIG_MIPS_BOSPORUS - int stub_init(struct net_device *dev, int phy_addr) - { -@@ -620,6 +711,12 @@ - } - #endif - -+struct phy_ops ns_83847_ops = { -+ ns_83847_init, -+ ns_83847_reset, -+ ns_83847_status, -+}; -+ - struct phy_ops bcm_5201_ops = { - bcm_5201_init, - bcm_5201_reset, -@@ -679,6 +776,7 @@ - {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0}, - {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0}, - {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0}, -+ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops }, - #ifdef CONFIG_MIPS_BOSPORUS - {"Stub", 0x1234, 0x5678, &stub_ops }, - #endif -@@ -872,6 +970,8 @@ - } - } - } -+ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name); -+ return -1; - found: - - #ifdef CONFIG_MIPS_BOSPORUS -diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h ---- linux-2.4.31.org/drivers/net/au1000_eth.h 2004-02-18 08:36:31.000000000 -0500 -+++ linux-2.4.31/drivers/net/au1000_eth.h 2005-08-22 12:31:37.000000000 -0400 -@@ -86,6 +86,27 @@ - #define MII_STAT_CAN_TX_FDX 0x4000 - #define MII_STAT_CAN_T4 0x8000 - -+/* mii registers for NS 83847 */ -+#define MII_NS_PHYSTS 0x10 -+#define MII_NS_FCSCR 0x14 -+#define MII_NS_RECR 0x15 -+#define MII_NS_PCSR 0x16 -+#define MII_NS_PHYCTRL 0x19 -+#define MII_NS_10BTSCR 0x1a -+#define MII_NS_CDCTRL 0x1b -+ -+/* MII_NS_PHYSTS bits */ -+#define MII_NS_PHYSTS_LINK (1) -+#define MII_NS_PHYSTS_SPEED_10 (1<<1) -+#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2) -+ -+/* MII_NS_PHYCTRL bits */ -+#define MII_NS_PHYCTRL_BP_STRETCH (1<<8) -+ -+/* MII_NS_CDCTRL bits */ -+#define MII_NS_CDCTRL_CD_ENABLE (1<<15) -+#define MII_NS_CDCTRL_RISETIME (1<<11) -+#define MII_NS_CDCTRL_FALLTIME (1<<9) - - #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ - #define MII_ID1_MODEL 0x03F0 /* model number */ diff --git a/target/device/jp/q5/kernel-patches-2.4.32/006-cfi b/target/device/jp/q5/kernel-patches-2.4.32/006-cfi deleted file mode 100644 index 5a28bd93f..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/006-cfi +++ /dev/null @@ -1,27 +0,0 @@ -diff -Naur linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 06:54:21.000000000 -0500 -+++ linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c 2005-08-22 12:14:17.000000000 -0400 -@@ -510,7 +510,7 @@ - or tells us why it failed. */ - dq6 = CMD(1<<6); - dq5 = CMD(1<<5); -- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ -+ timeo = jiffies + (HZ); /* setting timeout to 1s for now */ - - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); -@@ -950,12 +950,8 @@ - oldstatus = cfi_read( map, adr ); - status = cfi_read( map, adr ); - -- if( ( oldstatus & 0x00FF ) == ( status & 0x00FF ) ) -+ if( ( oldstatus & 0x00FF ) != ( status & 0x00FF ) ) - { -- printk( "Warning: DQ5 raised while erase operation was in progress, but erase completed OK\n" ); -- } -- else -- { - /* DQ5 is active so we can do a reset and stop the erase */ - cfi_write(map, CMD(0xF0), chip->start); - printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" ); - diff --git a/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 b/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 deleted file mode 100644 index d852ac9f6..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 +++ /dev/null @@ -1,13 +0,0 @@ ---- linux-2.4.32_old/arch/mips/au1000/common/clocks.c 2005-01-19 15:09:26.000000000 +0100 -+++ linux-2.4.32/arch/mips/au1000/common/clocks.c 2006-01-27 13:51:39.000000000 +0100 -@@ -85,9 +85,7 @@ - lcd_clock = sys_busclk / 4; - - if (lcd_clock > 50000) /* Epson MAX */ -- printk(__FUNCTION__ -- ": warning: LCD clock too high (%d KHz)\n", -- lcd_clock); -+ printk("warning: LCD clock too high (%d KHz)\n", lcd_clock); - } - - unsigned int get_au1x00_lcd_clock(void) diff --git a/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush b/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush deleted file mode 100644 index 996b4c666..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush +++ /dev/null @@ -1,14 +0,0 @@ ---- linux-2.4.32_old/include/asm-mips/wbflush.h 2006-01-26 15:16:14.000000000 +0100 -+++ linux-2.4.32/include/asm-mips/wbflush.h 2006-01-27 15:25:54.030500656 +0100 -@@ -15,9 +15,8 @@ - - #ifdef CONFIG_CPU_HAS_WB - --extern void (*__wbflush)(void); --extern void wbflush_setup(void); -- -+#define __wbflush() { __asm__ volatile ("sync"); } -+ - #define wbflush() \ - do { \ - __sync(); \ diff --git a/target/device/jp/q5/kernel-patches-2.4.32/100-version b/target/device/jp/q5/kernel-patches-2.4.32/100-version deleted file mode 100644 index c20e6a82d..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/100-version +++ /dev/null @@ -1,11 +0,0 @@ ---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 -+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 -@@ -1,7 +1,7 @@ - VERSION = 2 - PATCHLEVEL = 4 - SUBLEVEL = 32 --EXTRAVERSION = -+EXTRAVERSION =-q5 - - KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) - diff --git a/target/device/jp/q5/linux.config b/target/device/jp/q5/linux.config deleted file mode 100644 index 6a1016ef5..000000000 --- a/target/device/jp/q5/linux.config +++ /dev/null @@ -1,886 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MIPS=y -CONFIG_MIPS32=y -# CONFIG_MIPS64 is not set - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -# CONFIG_KMOD is not set - -# -# Machine selection -# -# CONFIG_ACER_PICA_61 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set -# CONFIG_MIPS_PB1550 is not set -CONFIG_MIPS_Q5=y -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_MIPS_MTX1 is not set -# CONFIG_COGENT_CSB250 is not set -# CONFIG_BAGET_MIPS is not set -# CONFIG_CASIO_E55 is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_HP_LASERJET is not set -# CONFIG_IBM_WORKPAD is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MAGNUM_4000 is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_PMC_BIG_SUR is not set -# CONFIG_PMC_STRETCH is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_DDB5074 is not set -# CONFIG_DDB5476 is not set -# CONFIG_DDB5477 is not set -# CONFIG_NEC_OSPREY is not set -# CONFIG_NEC_EAGLE is not set -# CONFIG_OLIVETTI_M700 is not set -# CONFIG_NINO is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SIBYTE_SB1xxx_SOC is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TANBAC_TB0226 is not set -# CONFIG_TANBAC_TB0229 is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_VICTOR_MPC30X is not set -# CONFIG_ZAO_CAPCELLA is not set -# CONFIG_HIGHMEM is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_SOC_AU1X00=y -CONFIG_SOC_AU1500=y -CONFIG_NONCOHERENT_IO=y -CONFIG_PC_KEYB=y -# CONFIG_MIPS_AU1000 is not set - -# -# CPU selection -# -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS64 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -# CONFIG_VTAG_ICACHE is not set -CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_ADVANCED=y -CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_LLDSCD is not set -CONFIG_CPU_HAS_WB=y -CONFIG_CPU_HAS_SYNC=y - -# -# General setup -# -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_BUILD_ELF64 is not set -CONFIG_NET=y -CONFIG_PCI=y -CONFIG_PCI_NEW=y -CONFIG_PCI_AUTO=y -# CONFIG_PCI_NAMES is not set -# CONFIG_ISA is not set -# CONFIG_TC is not set -# CONFIG_MCA is not set -# CONFIG_SBUS is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set -# CONFIG_HOTPLUG_PCI_PCIE is not set -# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_MIPS32_COMPAT is not set -# CONFIG_MIPS32_O32 is not set -# CONFIG_MIPS32_N32 is not set -# CONFIG_BINFMT_ELF32 is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_OOM_KILLER is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_B1 is not set -CONFIG_MTD_CFI_B2=y -CONFIG_MTD_CFI_B4=y -# CONFIG_MTD_CFI_B8 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_AMDSTD is not set -# CONFIG_MTD_SHARP is not set -# CONFIG_MTD_JEDEC is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x18000000 -CONFIG_MTD_PHYSMAP_LEN=0x2000000 -CONFIG_MTD_PHYSMAP_BUSWIDTH=4 -# CONFIG_MTD_PB1000 is not set -# CONFIG_MTD_PB1500 is not set -# CONFIG_MTD_PB1100 is not set -# CONFIG_MTD_CSTM_MIPS_IXX is not set -# CONFIG_MTD_OCELOT is not set -# CONFIG_MTD_LASAT is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PCMCIA is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC1000 is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOCPROBE is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play configuration -# -# CONFIG_PNP is not set -# CONFIG_ISAPNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_CISS_SCSI_TAPE is not set -# CONFIG_CISS_MONITOR_THREAD is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_BLK_STATS is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_BLK_DEV_LVM is not set - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_FILTER=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_FWMARK is not set -# CONFIG_IP_ROUTE_NAT is not set -# CONFIG_IP_ROUTE_MULTIPATH is not set -# CONFIG_IP_ROUTE_TOS is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -# CONFIG_NET_IPGRE_BROADCAST is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_IRC is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -# CONFIG_IP_NF_MATCH_AH_ESP is not set -# CONFIG_IP_NF_MATCH_LENGTH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -CONFIG_IP_NF_MATCH_TCPMSS=m -# CONFIG_IP_NF_MATCH_HELPER is not set -CONFIG_IP_NF_MATCH_STATE=m -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -CONFIG_IP_NF_MATCH_UNCLEAN=m -# CONFIG_IP_NF_MATCH_OWNER is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -# CONFIG_IP_NF_TARGET_MIRROR is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -# CONFIG_IP_NF_TARGET_ULOG is not set -# CONFIG_IP_NF_TARGET_TCPMSS is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_KHTTPD is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=y - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_DECNET is not set -CONFIG_BRIDGE=m -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_CSZ is not set -# CONFIG_NET_SCH_HFSC is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TEQL is not set -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -# CONFIG_NET_SCH_NETEM is not set -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_NET_CLS_RSVP is not set -# CONFIG_NET_CLS_RSVP6 is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_BCM5222_DUAL_PHY is not set -# CONFIG_SUNLANCE is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_CS89x0 is not set -# CONFIG_TULIP is not set -# CONFIG_DE4X5 is not set -# CONFIG_DGRS is not set -# CONFIG_DM9102 is not set -# CONFIG_EEPRO100 is not set -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_LNE390 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_FORCEDETH is not set -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_SUNDANCE_MMIO is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_VIA_RHINE_MMIO is not set -# CONFIG_WINBOND_840 is not set -# CONFIG_LAN_SAA9730 is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_MYRI_SBUS is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_PCI_HERMES is not set - -# -# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g) -# -CONFIG_PRISM54=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input core support -# -# CONFIG_INPUT is not set -# CONFIG_INPUT_KEYBDEV is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_UINPUT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -# CONFIG_SERIAL is not set -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_N_HDLC is not set -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -# CONFIG_SERIAL_TX3912 is not set -# CONFIG_SERIAL_TX3912_CONSOLE is not set -# CONFIG_SERIAL_TXX9 is not set -# CONFIG_SERIAL_TXX9_CONSOLE is not set -CONFIG_AU1X00_UART=y -CONFIG_AU1X00_SERIAL_CONSOLE=y -# CONFIG_AU1X00_USB_TTY is not set -# CONFIG_AU1X00_USB_RAW is not set -# CONFIG_TXX927_SERIAL is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set - -# -# Input core support is needed for gameports -# - -# -# Input core support is needed for joysticks -# -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200 is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set - -# -# Direct Rendering Manager (XFree86 DRI support) -# -# CONFIG_DRM is not set -# CONFIG_AU1X00_GPIO is not set -# CONFIG_TS_AU1X00_ADS7846 is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BEFS_DEBUG is not set -# CONFIG_BFS_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_JBD_DEBUG is not set -# CONFIG_FAT_FS is not set -# CONFIG_MSDOS_FS is not set -# CONFIG_UMSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_CRAMFS is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y -# CONFIG_ISO9660_FS is not set -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_JFS_FS is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_RW is not set -# CONFIG_HPFS_FS is not set -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_EXT2_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UDF_FS is not set -# CONFIG_UDF_RW is not set -# CONFIG_UFS_FS is not set -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_XFS_FS is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_TRACE is not set -# CONFIG_XFS_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_NFS_FS is not set -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -# CONFIG_SUNRPC is not set -# CONFIG_LOCKD is not set -# CONFIG_SMB_FS is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_SMB_NLS is not set -# CONFIG_NLS is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Console drivers -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# Support for USB gadgets -# -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_CROSSCOMPILE=y -# CONFIG_RUNTIME_DEBUG is not set -# CONFIG_KGDB is not set -# CONFIG_GDB_CONSOLE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_MIPS_UNCACHED is not set -CONFIG_LOG_BUF_SHIFT=0 - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_FW_LOADER=y diff --git a/target/device/jp/q5/linux.mk b/target/device/jp/q5/linux.mk deleted file mode 100644 index b246143f0..000000000 --- a/target/device/jp/q5/linux.mk +++ /dev/null @@ -1,129 +0,0 @@ -############################################################# -# -# Linux kernel targets -# -# Note: If you have any patches to apply, create the directory -# sources/kernel-patches and put your patches in there and number -# them in the order you wish to apply them... i.e. -# -# sources/kernel-patches/001-my-special-stuff.bz2 -# sources/kernel-patches/003-gcc-Os.bz2 -# sources/kernel-patches/004_no-warnings.bz2 -# sources/kernel-patches/030-lowlatency-mini.bz2 -# sources/kernel-patches/031-lowlatency-fixes-5.bz2 -# sources/kernel-patches/099-shutup.bz2 -# etc... -# -# these patches will all be applied by the patch-kernel.sh -# script (which will also abort the build if it finds rejects) -# -Erik -# -############################################################# -ifneq ($(filter $(TARGETS),linux),) - -# Base version of Linux kernel that we need to download -DOWNLOAD_LINUX_VERSION=2.4.32 -# Version of Linux kernel AFTER applying all patches -LINUX_VERSION=$(DOWNLOAD_LINUX_VERSION)-q5 - - -# File name for the Linux kernel binary -LINUX_KERNEL=linux-kernel-$(LINUX_VERSION)-$(ARCH).srec - - -# Linux kernel configuration file -LINUX_KCONFIG=$(BOARD_PATH)/linux.config - -# kernel patches -LINUX_PATCH_DIR=target/device/jp/q5/kernel-patches-$(DOWNLOAD_LINUX_VERSION)/ - - - - -LINUX_FORMAT=vmlinux -LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \ - -e 's/mipsel/mips/' \ - -e 's/powerpc/ppc/' \ - -e 's/sh[234]/sh/' \ - ) -LINUX_BINLOC=$(LINUX_FORMAT) -LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION) -LINUX_SOURCE=linux-$(DOWNLOAD_LINUX_VERSION).tar.bz2 -LINUX_CAT:=$(BZCAT) -LINUX_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.4 -# Used by pcmcia-cs and others -LINUX_SOURCE_DIR=$(LINUX_DIR) - -$(DL_DIR)/$(LINUX_SOURCE): - mkdir -p $(DL_DIR) - $(call DOWNLOAD,$(LINUX_SITE),$(LINUX_SOURCE)) - -$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) - mkdir -p $(TOOL_BUILD_DIR) - -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX_DIR) linux) - $(LINUX_CAT) $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - -ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION)) - # Rename the dir from the downloaded version to the AFTER patch version - mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION) -endif - toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR) - #New versions of binutils does not have -mcpu, but -mtune. -march is not needed because -mips2 is used - mv $(LINUX_DIR)/arch/mips/Makefile $(LINUX_DIR)/arch/mips/Makefile.org && sed 's/-mcpu/-mtune/g' < $(LINUX_DIR)/arch/mips/Makefile.org > $(LINUX_DIR)/arch/mips/Makefile - touch $(LINUX_DIR)/.unpacked - -$(LINUX_KCONFIG): - @if [ ! -f "$(LINUX_KCONFIG)" ]; then \ - echo ""; \ - echo "You should create a .config for your kernel"; \ - echo "and install it as $(LINUX_KCONFIG)"; \ - echo ""; \ - sleep 5; \ - fi - -$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG) - $(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile - $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile - -cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config -ifeq ($(BR2_mips),y) - $(SED) "s,CONFIG_CPU_LITTLE_ENDIAN=y,# CONFIG_CPU_LITTLE_ENDIAN is not set\n# CONFIG_BINFMT_IRIX is not set," $(LINUX_DIR)/.config -endif - $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h - touch $(LINUX_DIR)/.configured - -$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured - $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep - touch $(LINUX_DIR)/.depend_done - -$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done - $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) $(LINUX_FORMAT) - $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) modules - -$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC) - $(KERNEL_CROSS)objcopy -O srec $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL) - touch -c $(LINUX_KERNEL) - -$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep: $(LINUX_KERNEL) cross-depmod - rm -rf $(TARGET_DIR)/lib/modules - rm -f $(TARGET_DIR)/sbin/cardmgr - $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) \ - DEPMOD=$(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-depmod \ - INSTALL_MOD_PATH=$(TARGET_DIR) modules_install - -$(STAGING_DIR)/usr/include/linux/version.h: $(LINUX_DIR)/.configured - mkdir -p $(STAGING_DIR)/usr/include - tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/usr/include/ - tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/usr/include/ - -linux: $(STAGING_DIR)/usr/include/linux/version.h $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep - -linux-source: $(DL_DIR)/$(LINUX_SOURCE) - -# This has been renamed so we do _NOT_ by default run this on 'make clean' -linuxclean: clean - rm -f $(LINUX_KERNEL) - -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) clean - -linux-dirclean: - rm -rf $(LINUX_DIR) - -endif diff --git a/target/device/jp/q5/target_skeleton/bin/.empty b/target/device/jp/q5/target_skeleton/bin/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/bin/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/dev/log b/target/device/jp/q5/target_skeleton/dev/log deleted file mode 120000 index d96b3b1cb..000000000 --- a/target/device/jp/q5/target_skeleton/dev/log +++ /dev/null @@ -1 +0,0 @@ -../tmp/log
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/dev/pts/.empty b/target/device/jp/q5/target_skeleton/dev/pts/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/dev/pts/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/etc/TZ b/target/device/jp/q5/target_skeleton/etc/TZ deleted file mode 100644 index 9fcb2a3c5..000000000 --- a/target/device/jp/q5/target_skeleton/etc/TZ +++ /dev/null @@ -1 +0,0 @@ -MST7MDT diff --git a/target/device/jp/q5/target_skeleton/etc/fstab b/target/device/jp/q5/target_skeleton/etc/fstab deleted file mode 100644 index 6d33629a7..000000000 --- a/target/device/jp/q5/target_skeleton/etc/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/fstab: static file system information. -# -# <file system> <mount pt> <type> <options> <dump> <pass> -/dev/root / ext2 rw,noauto 0 1 -proc /proc proc defaults 0 0 -devpts /dev/pts devpts defaults,gid=5,mode=620 0 0 -tmpfs /tmp tmpfs defaults 0 0 - diff --git a/target/device/jp/q5/target_skeleton/etc/group b/target/device/jp/q5/target_skeleton/etc/group deleted file mode 100644 index a21ef0f76..000000000 --- a/target/device/jp/q5/target_skeleton/etc/group +++ /dev/null @@ -1,10 +0,0 @@ -root:x:0: -daemon:x:1: -bin:x:2: -sys:x:3: -adm:x:4: -tty:x:5: -disk:x:6: -utmp:x:43: -staff:x:50: -default:x:1000: diff --git a/target/device/jp/q5/target_skeleton/etc/hostname b/target/device/jp/q5/target_skeleton/etc/hostname deleted file mode 100644 index 52e67d68a..000000000 --- a/target/device/jp/q5/target_skeleton/etc/hostname +++ /dev/null @@ -1 +0,0 @@ -uclibc diff --git a/target/device/jp/q5/target_skeleton/etc/hosts b/target/device/jp/q5/target_skeleton/etc/hosts deleted file mode 100644 index ba712fe03..000000000 --- a/target/device/jp/q5/target_skeleton/etc/hosts +++ /dev/null @@ -1 +0,0 @@ -127.0.0.1 localhost diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom b/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom deleted file mode 100755 index f73cea59e..000000000 --- a/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom +++ /dev/null @@ -1,54 +0,0 @@ -#! /bin/sh -# -# urandom This script saves the random seed between reboots. -# It is called from the boot, halt and reboot scripts. -# -# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl -# - -[ -c /dev/urandom ] || exit 0 -#. /etc/default/rcS - -case "$1" in - start|"") - if [ "$VERBOSE" != no ] - then - echo -n "Initializing random number generator... " - fi - # Load and then save 512 bytes, - # which is the size of the entropy pool - if [ -f /etc/random-seed ] - then - cat /etc/random-seed >/dev/urandom - fi - # check for read only file system - if ! touch /etc/random-seed 2>/dev/null - then - echo "read-only file system detected...done" - exit - fi - rm -f /etc/random-seed - umask 077 - dd if=/dev/urandom of=/etc/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom start: failed." - umask 022 - [ "$VERBOSE" != no ] && echo "done." - ;; - stop) - if ! touch /etc/random-seed 2>/dev/null - then - exit - fi - # Carry a random seed from shut-down to start-up; - # see documentation in linux/drivers/char/random.c - [ "$VERBOSE" != no ] && echo -n "Saving random seed... " - umask 077 - dd if=/dev/urandom of=/etc/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom stop: failed." - [ "$VERBOSE" != no ] && echo "done." - ;; - *) - echo "Usage: urandom {start|stop}" >&2 - exit 1 - ;; -esac diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/S40network b/target/device/jp/q5/target_skeleton/etc/init.d/S40network deleted file mode 100755 index d835d9c72..000000000 --- a/target/device/jp/q5/target_skeleton/etc/init.d/S40network +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh -# -# Start the network.... -# - -start() { - echo "Starting network..." - /sbin/ifup -a -} -stop() { - echo -n "Stopping network..." - /sbin/ifdown -a -} -restart() { - stop - start -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart|reload) - restart - ;; - *) - echo $"Usage: $0 {start|stop|restart}" - exit 1 -esac - -exit $? - diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/rcS b/target/device/jp/q5/target_skeleton/etc/init.d/rcS deleted file mode 100755 index de411534d..000000000 --- a/target/device/jp/q5/target_skeleton/etc/init.d/rcS +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - - -# Start all init scripts in /etc/init.d -# executing them in numerical order. -# -for i in /etc/init.d/S??* ;do - - # Ignore dangling symlinks (if any). - [ ! -f "$i" ] && continue - - case "$i" in - *.sh) - # Source shell script for speed. - ( - trap - INT QUIT TSTP - set start - . $i - ) - ;; - *) - # No sh extension, so fork subprocess. - $i start - ;; - esac -done - diff --git a/target/device/jp/q5/target_skeleton/etc/inittab b/target/device/jp/q5/target_skeleton/etc/inittab deleted file mode 100644 index 8c809af68..000000000 --- a/target/device/jp/q5/target_skeleton/etc/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# /etc/inittab -# -# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org> -# -# Note: BusyBox init doesn't support runlevels. The runlevels field is -# completely ignored by BusyBox init. If you want runlevels, use -# sysvinit. -# -# Format for each entry: <id>:<runlevels>:<action>:<process> -# -# id == tty to run on, or empty for /dev/console -# runlevels == ignored -# action == one of sysinit, respawn, askfirst, wait, and once -# process == program to run - -# Startup the system -null::sysinit:/bin/mount -o remount,rw / -null::sysinit:/bin/mount -t proc proc /proc -null::sysinit:/bin/mount -a -null::sysinit:/bin/hostname -F /etc/hostname -null::sysinit:/sbin/ifconfig lo 127.0.0.1 up -null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo -# now run any rc scripts -::sysinit:/etc/init.d/rcS - -# Set up a couple of getty's -#tty1::respawn:/sbin/getty 38400 tty1 -#tty2::respawn:/sbin/getty 38400 tty2 - -# Put a getty on the serial port -ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 - -# Logging junk -null::sysinit:/bin/touch /var/log/messages -null::respawn:/sbin/syslogd -n -m 0 -null::respawn:/sbin/klogd -n -#tty3::respawn:/usr/bin/tail -f /var/log/messages - -# Stuff to do for the 3-finger salute -::ctrlaltdel:/sbin/reboot - -# Stuff to do before rebooting -null::shutdown:/usr/bin/killall klogd -null::shutdown:/usr/bin/killall syslogd -null::shutdown:/bin/umount -a -r -null::shutdown:/sbin/swapoff -a - diff --git a/target/device/jp/q5/target_skeleton/etc/inputrc b/target/device/jp/q5/target_skeleton/etc/inputrc deleted file mode 100644 index 2f1cb601a..000000000 --- a/target/device/jp/q5/target_skeleton/etc/inputrc +++ /dev/null @@ -1,44 +0,0 @@ -# /etc/inputrc - global inputrc for libreadline -# See readline(3readline) and `info readline' for more information. - -# Be 8 bit clean. -set input-meta on -set output-meta on -set bell-style visible - -# To allow the use of 8bit-characters like the german umlauts, comment out -# the line below. However this makes the meta key not work as a meta key, -# which is annoying to those which don't need to type in 8-bit characters. - -# set convert-meta off - -"\e0d": backward-word -"\e0c": forward-word -"\e[h": beginning-of-line -"\e[f": end-of-line -"\e[1~": beginning-of-line -"\e[4~": end-of-line -#"\e[5~": beginning-of-history -#"\e[6~": end-of-history -"\e[3~": delete-char -"\e[2~": quoted-insert - -# Common standard keypad and cursor -# (codes courtsey Werner Fink, <werner@suse.de>) -#"\e[1~": history-search-backward -"\e[2~": yank -"\e[3~": delete-char -#"\e[4~": set-mark -"\e[5~": history-search-backward -"\e[6~": history-search-forward -# Normal keypad and cursor of xterm -"\e[F": end-of-line -"\e[H": beginning-of-line -# Application keypad and cursor of xterm -"\eOA": previous-history -"\eOC": forward-char -"\eOB": next-history -"\eOD": backward-char -"\eOF": end-of-line -"\eOH": beginning-of-line - diff --git a/target/device/jp/q5/target_skeleton/etc/issue b/target/device/jp/q5/target_skeleton/etc/issue deleted file mode 100644 index f24b862c9..000000000 --- a/target/device/jp/q5/target_skeleton/etc/issue +++ /dev/null @@ -1,4 +0,0 @@ - - -Welcome to the Erik's uClibc development environment. - diff --git a/target/device/jp/q5/target_skeleton/etc/mtab b/target/device/jp/q5/target_skeleton/etc/mtab deleted file mode 120000 index e1c204547..000000000 --- a/target/device/jp/q5/target_skeleton/etc/mtab +++ /dev/null @@ -1 +0,0 @@ -../proc/mounts
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/etc/network/interfaces b/target/device/jp/q5/target_skeleton/etc/network/interfaces deleted file mode 100644 index 218b82cde..000000000 --- a/target/device/jp/q5/target_skeleton/etc/network/interfaces +++ /dev/null @@ -1,4 +0,0 @@ -# Configure Loopback -auto lo -iface lo inet loopback - diff --git a/target/device/jp/q5/target_skeleton/etc/passwd b/target/device/jp/q5/target_skeleton/etc/passwd deleted file mode 100644 index e0f473fc7..000000000 --- a/target/device/jp/q5/target_skeleton/etc/passwd +++ /dev/null @@ -1,13 +0,0 @@ -root:x:0:0:root:/root:/bin/sh -daemon:x:1:1:daemon:/usr/sbin:/bin/sh -bin:x:2:2:bin:/bin:/bin/sh -sys:x:3:3:sys:/dev:/bin/sh -sync:x:4:100:sync:/bin:/bin/sync -mail:x:8:8:mail:/var/spool/mail:/bin/sh -proxy:x:13:13:proxy:/bin:/bin/sh -www-data:x:33:33:www-data:/var/www:/bin/sh -backup:x:34:34:backup:/var/backups:/bin/sh -operator:x:37:37:Operator:/var:/bin/sh -sshd:x:103:99:Operator:/var:/bin/sh -nobody:x:99:99:nobody:/home:/bin/sh -default:x:1000:1000:Default non-root user:/home/default:/bin/sh diff --git a/target/device/jp/q5/target_skeleton/etc/profile b/target/device/jp/q5/target_skeleton/etc/profile deleted file mode 100644 index 6aa4259fd..000000000 --- a/target/device/jp/q5/target_skeleton/etc/profile +++ /dev/null @@ -1,48 +0,0 @@ -# ~/.bashrc: executed by bash(1) for non-login interactive shells. - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -# If running interactively, then: -if [ "$PS1" ]; then - - if [ "$BASH" ]; then - export PS1="[\u@\h \W]\\$ " - alias ll='/bin/ls -laFh' - alias ls='/bin/ls -F' - export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:'; - else - if [ "`id -u`" -eq 0 ]; then - export PS1='# ' - else - export PS1='$ ' - fi - fi - - export USER=`id -un` - export LOGNAME=$USER - export HOSTNAME=`/bin/hostname` - export HISTSIZE=1000 - export HISTFILESIZE=1000 - export PAGER='/bin/more ' - export EDITOR='/bin/vi' - export INPUTRC=/etc/inputrc - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - - ### Some aliases - alias ps2='ps facux ' - alias ps1='ps faxo "%U %t %p %a" ' - alias af='ps af' - alias cls='clear' - alias df='df -h' - alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 ' - #alias bc='bc -l' - alias minicom='minicom -c on' - alias calc='calc -Cd ' - alias bc='calc -Cd ' -fi; diff --git a/target/device/jp/q5/target_skeleton/etc/protocols b/target/device/jp/q5/target_skeleton/etc/protocols deleted file mode 100644 index 1ac8a4096..000000000 --- a/target/device/jp/q5/target_skeleton/etc/protocols +++ /dev/null @@ -1,31 +0,0 @@ -# /etc/protocols: -# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $ -# -# Internet (IP) protocols -# -# from: @(#)protocols 5.1 (Berkeley) 4/17/89 -# -# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992). - -ip 0 IP # internet protocol, pseudo protocol number -icmp 1 ICMP # internet control message protocol -igmp 2 IGMP # Internet Group Management -ggp 3 GGP # gateway-gateway protocol -ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'') -st 5 ST # ST datagram mode -tcp 6 TCP # transmission control protocol -egp 8 EGP # exterior gateway protocol -pup 12 PUP # PARC universal packet protocol -udp 17 UDP # user datagram protocol -hmp 20 HMP # host monitoring protocol -xns-idp 22 XNS-IDP # Xerox NS IDP -rdp 27 RDP # "reliable datagram" protocol -iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4 -xtp 36 XTP # Xpress Tranfer Protocol -ddp 37 DDP # Datagram Delivery Protocol -idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport -rspf 73 RSPF #Radio Shortest Path First. -vmtp 81 VMTP # Versatile Message Transport -ospf 89 OSPFIGP # Open Shortest Path First IGP -ipip 94 IPIP # Yet Another IP encapsulation -encap 98 ENCAP # Yet Another IP encapsulation diff --git a/target/device/jp/q5/target_skeleton/etc/resolv.conf b/target/device/jp/q5/target_skeleton/etc/resolv.conf deleted file mode 120000 index 71f6f9657..000000000 --- a/target/device/jp/q5/target_skeleton/etc/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -../tmp/resolv.conf
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/etc/securetty b/target/device/jp/q5/target_skeleton/etc/securetty deleted file mode 100644 index 81616f38e..000000000 --- a/target/device/jp/q5/target_skeleton/etc/securetty +++ /dev/null @@ -1,12 +0,0 @@ -tty1 -tty2 -tty3 -tty4 -tty5 -tty6 -tty7 -tty8 -ttyS0 -ttyS1 -ttyS2 -ttyS3 diff --git a/target/device/jp/q5/target_skeleton/etc/services b/target/device/jp/q5/target_skeleton/etc/services deleted file mode 100644 index b287b63ea..000000000 --- a/target/device/jp/q5/target_skeleton/etc/services +++ /dev/null @@ -1,302 +0,0 @@ -# /etc/services: -# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $ -# -# Network services, Internet style -# -# Note that it is presently the policy of IANA to assign a single well-known -# port number for both TCP and UDP; hence, most entries here have two entries -# even if the protocol doesn't support UDP operations. -# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports -# are included, only the more common ones. - -tcpmux 1/tcp # TCP port service multiplexer -echo 7/tcp -echo 7/udp -discard 9/tcp sink null -discard 9/udp sink null -systat 11/tcp users -daytime 13/tcp -daytime 13/udp -netstat 15/tcp -qotd 17/tcp quote -msp 18/tcp # message send protocol -msp 18/udp # message send protocol -chargen 19/tcp ttytst source -chargen 19/udp ttytst source -ftp-data 20/tcp -ftp 21/tcp -fsp 21/udp fspd -ssh 22/tcp # SSH Remote Login Protocol -ssh 22/udp # SSH Remote Login Protocol -telnet 23/tcp -# 24 - private -smtp 25/tcp mail -# 26 - unassigned -time 37/tcp timserver -time 37/udp timserver -rlp 39/udp resource # resource location -nameserver 42/tcp name # IEN 116 -whois 43/tcp nicname -re-mail-ck 50/tcp # Remote Mail Checking Protocol -re-mail-ck 50/udp # Remote Mail Checking Protocol -domain 53/tcp nameserver # name-domain server -domain 53/udp nameserver -mtp 57/tcp # deprecated -bootps 67/tcp # BOOTP server -bootps 67/udp -bootpc 68/tcp # BOOTP client -bootpc 68/udp -tftp 69/udp -gopher 70/tcp # Internet Gopher -gopher 70/udp -rje 77/tcp netrjs -finger 79/tcp -www 80/tcp http # WorldWideWeb HTTP -www 80/udp # HyperText Transfer Protocol -link 87/tcp ttylink -kerberos 88/tcp kerberos5 krb5 # Kerberos v5 -kerberos 88/udp kerberos5 krb5 # Kerberos v5 -supdup 95/tcp -# 100 - reserved -hostnames 101/tcp hostname # usually from sri-nic -iso-tsap 102/tcp tsap # part of ISODE. -csnet-ns 105/tcp cso-ns # also used by CSO name server -csnet-ns 105/udp cso-ns -# unfortunately the poppassd (Eudora) uses a port which has already -# been assigned to a different service. We list the poppassd as an -# alias here. This should work for programs asking for this service. -# (due to a bug in inetd the 3com-tsmux line is disabled) -#3com-tsmux 106/tcp poppassd -#3com-tsmux 106/udp poppassd -rtelnet 107/tcp # Remote Telnet -rtelnet 107/udp -pop-2 109/tcp postoffice # POP version 2 -pop-2 109/udp -pop-3 110/tcp # POP version 3 -pop-3 110/udp -sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP -sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP -auth 113/tcp authentication tap ident -sftp 115/tcp -uucp-path 117/tcp -nntp 119/tcp readnews untp # USENET News Transfer Protocol -ntp 123/tcp -ntp 123/udp # Network Time Protocol -netbios-ns 137/tcp # NETBIOS Name Service -netbios-ns 137/udp -netbios-dgm 138/tcp # NETBIOS Datagram Service -netbios-dgm 138/udp -netbios-ssn 139/tcp # NETBIOS session service -netbios-ssn 139/udp -imap2 143/tcp # Interim Mail Access Proto v2 -imap2 143/udp -snmp 161/udp # Simple Net Mgmt Proto -snmp-trap 162/udp snmptrap # Traps for SNMP -cmip-man 163/tcp # ISO mgmt over IP (CMOT) -cmip-man 163/udp -cmip-agent 164/tcp -cmip-agent 164/udp -xdmcp 177/tcp # X Display Mgr. Control Proto -xdmcp 177/udp -nextstep 178/tcp NeXTStep NextStep # NeXTStep window -nextstep 178/udp NeXTStep NextStep # server -bgp 179/tcp # Border Gateway Proto. -bgp 179/udp -prospero 191/tcp # Cliff Neuman's Prospero -prospero 191/udp -irc 194/tcp # Internet Relay Chat -irc 194/udp -smux 199/tcp # SNMP Unix Multiplexer -smux 199/udp -at-rtmp 201/tcp # AppleTalk routing -at-rtmp 201/udp -at-nbp 202/tcp # AppleTalk name binding -at-nbp 202/udp -at-echo 204/tcp # AppleTalk echo -at-echo 204/udp -at-zis 206/tcp # AppleTalk zone information -at-zis 206/udp -qmtp 209/tcp # The Quick Mail Transfer Protocol -qmtp 209/udp # The Quick Mail Transfer Protocol -z3950 210/tcp wais # NISO Z39.50 database -z3950 210/udp wais -ipx 213/tcp # IPX -ipx 213/udp -imap3 220/tcp # Interactive Mail Access -imap3 220/udp # Protocol v3 -ulistserv 372/tcp # UNIX Listserv -ulistserv 372/udp -https 443/tcp # MCom -https 443/udp # MCom -snpp 444/tcp # Simple Network Paging Protocol -snpp 444/udp # Simple Network Paging Protocol -saft 487/tcp # Simple Asynchronous File Transfer -saft 487/udp # Simple Asynchronous File Transfer -npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS -npmp-local 610/udp dqs313_qmaster # npmp-local / DQS -npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS -npmp-gui 611/udp dqs313_execd # npmp-gui / DQS -hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS -hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS -# -# UNIX specific services -# -exec 512/tcp -biff 512/udp comsat -login 513/tcp -who 513/udp whod -shell 514/tcp cmd # no passwords used -syslog 514/udp -printer 515/tcp spooler # line printer spooler -talk 517/udp -ntalk 518/udp -route 520/udp router routed # RIP -timed 525/udp timeserver -tempo 526/tcp newdate -courier 530/tcp rpc -conference 531/tcp chat -netnews 532/tcp readnews -netwall 533/udp # -for emergency broadcasts -uucp 540/tcp uucpd # uucp daemon -afpovertcp 548/tcp # AFP over TCP -afpovertcp 548/udp # AFP over TCP -remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem -klogin 543/tcp # Kerberized `rlogin' (v5) -kshell 544/tcp krcmd # Kerberized `rsh' (v5) -kerberos-adm 749/tcp # Kerberos `kadmin' (v5) -# -webster 765/tcp # Network dictionary -webster 765/udp -# -# From ``Assigned Numbers'': -# -#> The Registered Ports are not controlled by the IANA and on most systems -#> can be used by ordinary user processes or programs executed by ordinary -#> users. -# -#> Ports are used in the TCP [45,106] to name the ends of logical -#> connections which carry long term conversations. For the purpose of -#> providing services to unknown callers, a service contact port is -#> defined. This list specifies the port used by the server process as its -#> contact port. While the IANA can not control uses of these ports it -#> does register or list uses of these ports as a convienence to the -#> community. -# -nfsdstatus 1110/tcp -nfsd-keepalive 1110/udp - -ingreslock 1524/tcp -ingreslock 1524/udp -prospero-np 1525/tcp # Prospero non-privileged -prospero-np 1525/udp -datametrics 1645/tcp old-radius # datametrics / old radius entry -datametrics 1645/udp old-radius # datametrics / old radius entry -sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry -sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry -radius 1812/tcp # Radius -radius 1812/udp # Radius -radacct 1813/tcp # Radius Accounting -radacct 1813/udp # Radius Accounting -nfsd 2049/tcp nfs -nfsd 2049/udp nfs -cvspserver 2401/tcp # CVS client/server operations -cvspserver 2401/udp # CVS client/server operations -mysql 3306/tcp # MySQL -mysql 3306/udp # MySQL -rfe 5002/tcp # Radio Free Ethernet -rfe 5002/udp # Actually uses UDP only -cfengine 5308/tcp # CFengine -cfengine 5308/udp # CFengine -bbs 7000/tcp # BBS service -# -# -# Kerberos (Project Athena/MIT) services -# Note that these are for Kerberos v4, and are unofficial. Sites running -# v4 should uncomment these and comment out the v5 entries above. -# -kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp -kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp -kerberos_master 751/udp # Kerberos authentication -kerberos_master 751/tcp # Kerberos authentication -passwd_server 752/udp # Kerberos passwd server -krb_prop 754/tcp # Kerberos slave propagation -krbupdate 760/tcp kreg # Kerberos registration -kpasswd 761/tcp kpwd # Kerberos "passwd" -kpop 1109/tcp # Pop with Kerberos -knetd 2053/tcp # Kerberos de-multiplexor -zephyr-srv 2102/udp # Zephyr server -zephyr-clt 2103/udp # Zephyr serv-hm connection -zephyr-hm 2104/udp # Zephyr hostmanager -eklogin 2105/tcp # Kerberos encrypted rlogin -# -# Unofficial but necessary (for NetBSD) services -# -supfilesrv 871/tcp # SUP server -supfiledbg 1127/tcp # SUP debugging -# -# Datagram Delivery Protocol services -# -rtmp 1/ddp # Routing Table Maintenance Protocol -nbp 2/ddp # Name Binding Protocol -echo 4/ddp # AppleTalk Echo Protocol -zip 6/ddp # Zone Information Protocol -# -# Services added for the Debian GNU/Linux distribution -poppassd 106/tcp # Eudora -poppassd 106/udp # Eudora -mailq 174/tcp # Mailer transport queue for Zmailer -mailq 174/tcp # Mailer transport queue for Zmailer -omirr 808/tcp omirrd # online mirror -omirr 808/udp omirrd # online mirror -rmtcfg 1236/tcp # Gracilis Packeten remote config server -xtel 1313/tcp # french minitel -coda_opcons 1355/udp # Coda opcons (Coda fs) -coda_venus 1363/udp # Coda venus (Coda fs) -coda_auth 1357/udp # Coda auth (Coda fs) -coda_udpsrv 1359/udp # Coda udpsrv (Coda fs) -coda_filesrv 1361/udp # Coda filesrv (Coda fs) -codacon 1423/tcp venus.cmu # Coda Console (Coda fs) -coda_aux1 1431/tcp # coda auxiliary service (Coda fs) -coda_aux1 1431/udp # coda auxiliary service (Coda fs) -coda_aux2 1433/tcp # coda auxiliary service (Coda fs) -coda_aux2 1433/udp # coda auxiliary service (Coda fs) -coda_aux3 1435/tcp # coda auxiliary service (Coda fs) -coda_aux3 1435/udp # coda auxiliary service (Coda fs) -cfinger 2003/tcp # GNU Finger -afbackup 2988/tcp # Afbackup system -afbackup 2988/udp # Afbackup system -icp 3130/tcp # Internet Cache Protocol (Squid) -icp 3130/udp # Internet Cache Protocol (Squid) -postgres 5432/tcp # POSTGRES -postgres 5432/udp # POSTGRES -fax 4557/tcp # FAX transmission service (old) -hylafax 4559/tcp # HylaFAX client-server protocol (new) -noclog 5354/tcp # noclogd with TCP (nocol) -noclog 5354/udp # noclogd with UDP (nocol) -hostmon 5355/tcp # hostmon uses TCP (nocol) -hostmon 5355/udp # hostmon uses TCP (nocol) -ircd 6667/tcp # Internet Relay Chat -ircd 6667/udp # Internet Relay Chat -webcache 8080/tcp # WWW caching service -webcache 8080/udp # WWW caching service -tproxy 8081/tcp # Transparent Proxy -tproxy 8081/udp # Transparent Proxy -mandelspawn 9359/udp mandelbrot # network mandelbrot -amanda 10080/udp # amanda backup services -amandaidx 10082/tcp # amanda backup services -amidxtape 10083/tcp # amanda backup services -isdnlog 20011/tcp # isdn logging system -isdnlog 20011/udp # isdn logging system -vboxd 20012/tcp # voice box system -vboxd 20012/udp # voice box system -binkp 24554/tcp # Binkley -binkp 24554/udp # Binkley -asp 27374/tcp # Address Search Protocol -asp 27374/udp # Address Search Protocol -tfido 60177/tcp # Ifmail -tfido 60177/udp # Ifmail -fido 60179/tcp # Ifmail -fido 60179/udp # Ifmail - -# Local services - diff --git a/target/device/jp/q5/target_skeleton/etc/shadow b/target/device/jp/q5/target_skeleton/etc/shadow deleted file mode 100644 index 4941a1ac5..000000000 --- a/target/device/jp/q5/target_skeleton/etc/shadow +++ /dev/null @@ -1,12 +0,0 @@ -root::10933:0:99999:7::: -bin:*:10933:0:99999:7::: -daemon:*:10933:0:99999:7::: -adm:*:10933:0:99999:7::: -lp:*:10933:0:99999:7::: -sync:*:10933:0:99999:7::: -shutdown:*:10933:0:99999:7::: -halt:*:10933:0:99999:7::: -uucp:*:10933:0:99999:7::: -operator:*:10933:0:99999:7::: -nobody:*:10933:0:99999:7::: -default::10933:0:99999:7::: diff --git a/target/device/jp/q5/target_skeleton/home/.empty b/target/device/jp/q5/target_skeleton/home/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/home/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/lib/.empty b/target/device/jp/q5/target_skeleton/lib/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/lib/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/mnt/.empty b/target/device/jp/q5/target_skeleton/mnt/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/mnt/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/opt/.empty b/target/device/jp/q5/target_skeleton/opt/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/opt/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/proc/.empty b/target/device/jp/q5/target_skeleton/proc/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/proc/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/root/.bash_history b/target/device/jp/q5/target_skeleton/root/.bash_history deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/root/.bash_history +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/root/.bash_logout b/target/device/jp/q5/target_skeleton/root/.bash_logout deleted file mode 100644 index 77ef1f950..000000000 --- a/target/device/jp/q5/target_skeleton/root/.bash_logout +++ /dev/null @@ -1,7 +0,0 @@ -# ~/.bash_logout: executed by bash(1) when login shell exits. - -# when leaving the console clear the screen to increase privacy - -case "`tty`" in - /dev/tty[0-9]*) clear -esac diff --git a/target/device/jp/q5/target_skeleton/root/.bash_profile b/target/device/jp/q5/target_skeleton/root/.bash_profile deleted file mode 100644 index 27bf14953..000000000 --- a/target/device/jp/q5/target_skeleton/root/.bash_profile +++ /dev/null @@ -1,15 +0,0 @@ -# .bash_profile - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -umask 022 - -if [ -f ~/.bashrc ]; then - source ~/.bashrc -fi diff --git a/target/device/jp/q5/target_skeleton/root/.bashrc b/target/device/jp/q5/target_skeleton/root/.bashrc deleted file mode 100644 index c97c9c4dc..000000000 --- a/target/device/jp/q5/target_skeleton/root/.bashrc +++ /dev/null @@ -1,48 +0,0 @@ -# ~/.bashrc: executed by bash(1) for non-login interactive shells. - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -# If running interactively, then: -if [ "$PS1" ]; then - - if [ "$BASH" ]; then - export PS1="[\u@\h \W]\\$ " - else - if [ "`id -u`" -eq 0 ]; then - export PS1='# ' - else - export PS1='$ ' - fi - fi - - export USER=`id -un` - export LOGNAME=$USER - export HOSTNAME=`/bin/hostname` - export HISTSIZE=1000 - export HISTFILESIZE=1000 - export PAGER='/bin/more ' - export EDITOR='/bin/vi' - export INPUTRC=/etc/inputrc - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:'; - - ### Some aliases - alias ps2='ps facux ' - alias ps1='ps faxo "%U %t %p %a" ' - alias af='ps af' - alias cls='clear' - alias ll='/bin/ls -laFh' - alias ls='/bin/ls -F' - alias df='df -h' - alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 ' - #alias bc='bc -l' - alias minicom='minicom -c on' - alias calc='calc -Cd ' - alias bc='calc -Cd ' -fi; diff --git a/target/device/jp/q5/target_skeleton/root/.empty b/target/device/jp/q5/target_skeleton/root/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/root/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/sbin/.empty b/target/device/jp/q5/target_skeleton/sbin/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/sbin/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/tmp/.empty b/target/device/jp/q5/target_skeleton/tmp/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/tmp/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/usr/bin/.empty b/target/device/jp/q5/target_skeleton/usr/bin/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/usr/bin/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/usr/lib/.empty b/target/device/jp/q5/target_skeleton/usr/lib/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/usr/lib/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/usr/sbin/.empty b/target/device/jp/q5/target_skeleton/usr/sbin/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/jp/q5/target_skeleton/usr/sbin/.empty +++ /dev/null diff --git a/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script b/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script deleted file mode 100755 index a52a7f812..000000000 --- a/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh - -# udhcpc script edited by Tim Riker <Tim@Rikers.org> - -[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1 - -RESOLV_CONF="/etc/resolv.conf" -[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast" -[ -n "$subnet" ] && NETMASK="netmask $subnet" - -case "$1" in - deconfig) - /sbin/ifconfig $interface 0.0.0.0 - ;; - - renew|bound) - /sbin/ifconfig $interface $ip $BROADCAST $NETMASK - - if [ -n "$router" ] ; then - echo "deleting routers" - while route del default gw 0.0.0.0 dev $interface ; do - : - done - - for i in $router ; do - route add default gw $i dev $interface - done - fi - - echo -n > $RESOLV_CONF - [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF - for i in $dns ; do - echo adding dns $i - echo nameserver $i >> $RESOLV_CONF - done - ;; -esac - -exit 0 diff --git a/target/device/jp/q5/target_skeleton/var/lib/pcmcia b/target/device/jp/q5/target_skeleton/var/lib/pcmcia deleted file mode 120000 index f1fde8c10..000000000 --- a/target/device/jp/q5/target_skeleton/var/lib/pcmcia +++ /dev/null @@ -1 +0,0 @@ -../../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/var/lock b/target/device/jp/q5/target_skeleton/var/lock deleted file mode 120000 index 1431b0e43..000000000 --- a/target/device/jp/q5/target_skeleton/var/lock +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/var/log b/target/device/jp/q5/target_skeleton/var/log deleted file mode 120000 index 1431b0e43..000000000 --- a/target/device/jp/q5/target_skeleton/var/log +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/var/pcmcia b/target/device/jp/q5/target_skeleton/var/pcmcia deleted file mode 120000 index 1431b0e43..000000000 --- a/target/device/jp/q5/target_skeleton/var/pcmcia +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/var/run b/target/device/jp/q5/target_skeleton/var/run deleted file mode 120000 index 1431b0e43..000000000 --- a/target/device/jp/q5/target_skeleton/var/run +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/var/spool b/target/device/jp/q5/target_skeleton/var/spool deleted file mode 120000 index 1431b0e43..000000000 --- a/target/device/jp/q5/target_skeleton/var/spool +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/target_skeleton/var/tmp b/target/device/jp/q5/target_skeleton/var/tmp deleted file mode 120000 index 1431b0e43..000000000 --- a/target/device/jp/q5/target_skeleton/var/tmp +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/target/device/jp/q5/uClibc.config.mipsel b/target/device/jp/q5/uClibc.config.mipsel deleted file mode 100644 index d0fc762a9..000000000 --- a/target/device/jp/q5/uClibc.config.mipsel +++ /dev/null @@ -1,163 +0,0 @@ -# -# Automatically generated make config: don't edit -# -# TARGET_alpha is not set -# TARGET_arm is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_i386 is not set -# TARGET_i960 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -TARGET_mips=y -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_x86_64 is not set - -# -# Target Architecture Features and Options -# -HAVE_ELF=y -ARCH_SUPPORTS_LITTLE_ENDIAN=y -TARGET_ARCH="mips" -ARCH_CFLAGS="-mno-split-addresses" -ARCH_SUPPORTS_BIG_ENDIAN=y -# CONFIG_MIPS_ISA_1 is not set -# CONFIG_MIPS_ISA_2 is not set -# CONFIG_MIPS_ISA_3 is not set -# CONFIG_MIPS_ISA_4 is not set -CONFIG_MIPS_ISA_MIPS32=y -# CONFIG_MIPS_ISA_MIPS64 is not set -ARCH_LITTLE_ENDIAN=y -# ARCH_BIG_ENDIAN is not set -# ARCH_HAS_NO_MMU is not set -ARCH_HAS_MMU=y -UCLIBC_HAS_FLOATS=y -HAS_FPU=y -DO_C99_MATH=y -KERNEL_SOURCE="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/toolchain_build_mipsel/linux" -C_SYMBOL_PREFIX="" -HAVE_DOT_CONFIG=y - -# -# General Library Settings -# -# HAVE_NO_PIC is not set -DOPIC=y -# HAVE_NO_SHARED is not set -HAVE_SHARED=y -# ARCH_HAS_NO_LDSO is not set -BUILD_UCLIBC_LDSO=y -# FORCE_SHAREABLE_TEXT_SEGMENTS is not set -LDSO_LDD_SUPPORT=y -LDSO_CACHE_SUPPORT=y -# LDSO_PRELOAD_FILE_SUPPORT is not set -LDSO_BASE_FILENAME="ld.so" -LDSO_RUNPATH=y -# DL_FINI_CRT_COMPAT is not set -UCLIBC_CTOR_DTOR=y -# HAS_NO_THREADS is not set -UCLIBC_HAS_THREADS=y -PTHREADS_DEBUG_SUPPORT=y -UCLIBC_HAS_LFS=y -# UCLIBC_STATIC_LDCONFIG is not set -# MALLOC is not set -# MALLOC_SIMPLE is not set -MALLOC_STANDARD=y -MALLOC_GLIBC_COMPAT=y -UCLIBC_DYNAMIC_ATEXIT=y -HAS_SHADOW=y -# UNIX98PTY_ONLY is not set -ASSUME_DEVPTS=y -UCLIBC_HAS_TM_EXTENSIONS=y -UCLIBC_HAS_TZ_CACHING=y -UCLIBC_HAS_TZ_FILE=y -UCLIBC_HAS_TZ_FILE_READ_MANY=y -UCLIBC_TZ_FILE_PATH="/etc/TZ" - -# -# Networking Support -# -UCLIBC_HAS_IPV6=y -UCLIBC_HAS_RPC=y -UCLIBC_HAS_FULL_RPC=y - -# -# String and Stdio Support -# -UCLIBC_HAS_STRING_GENERIC_OPT=y -UCLIBC_HAS_STRING_ARCH_OPT=y -UCLIBC_HAS_CTYPE_TABLES=y -UCLIBC_HAS_CTYPE_SIGNED=y -# UCLIBC_HAS_CTYPE_UNSAFE is not set -UCLIBC_HAS_CTYPE_CHECKED=y -# UCLIBC_HAS_CTYPE_ENFORCED is not set -UCLIBC_HAS_WCHAR=y -# UCLIBC_HAS_LOCALE is not set -UCLIBC_HAS_HEXADECIMAL_FLOATS=y -UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y -UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 -UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y -# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set -# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set -UCLIBC_HAS_STDIO_BUFSIZ_4096=y -# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set -UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set -# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set -UCLIBC_HAS_STDIO_GETC_MACRO=y -UCLIBC_HAS_STDIO_PUTC_MACRO=y -UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y -# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set -UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y -UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y -UCLIBC_HAS_PRINTF_M_SPEC=y -UCLIBC_HAS_ERRNO_MESSAGES=y -# UCLIBC_HAS_SYS_ERRLIST is not set -UCLIBC_HAS_SIGNUM_MESSAGES=y -# UCLIBC_HAS_SYS_SIGLIST is not set -UCLIBC_HAS_GNU_GETOPT=y - -# -# Big and Tall -# -UCLIBC_HAS_REGEX=y -# UCLIBC_HAS_WORDEXP is not set -UCLIBC_HAS_FTW=y -UCLIBC_HAS_GLOB=y - -# -# Library Installation Options -# -SHARED_LIB_LOADER_PREFIX="/lib" -RUNTIME_PREFIX="/" -DEVEL_PREFIX="/usr/" - -# -# uClibc security related options -# -# UCLIBC_SECURITY is not set - -# -# uClibc development/debugging options -# -CROSS_COMPILER_PREFIX="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/build_mipsel/staging_dir/bin/mipsel-linux-uclibc-" -# DODEBUG is not set -# DODEBUG_PT is not set -# DOASSERTS is not set -# SUPPORT_LD_DEBUG is not set -# SUPPORT_LD_DEBUG_EARLY is not set -WARNINGS="-Wall" -# UCLIBC_MJN3_ONLY is not set |