diff options
Diffstat (limited to 'target/device/jp/q5/kernel-patches-2.4.32/001-q5')
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/001-q5 | 342 |
1 files changed, 0 insertions, 342 deletions
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 b/target/device/jp/q5/kernel-patches-2.4.32/001-q5 deleted file mode 100644 index 1e2718a7a..000000000 --- a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 +++ /dev/null @@ -1,342 +0,0 @@ -diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile ---- linux-2.4.31.org/arch/mips/Makefile 2005-01-19 09:09:26.000000000 -0500 -+++ linux-2.4.31/arch/mips/Makefile 2005-09-10 17:29:44.000000000 -0400 -@@ -241,6 +241,16 @@ - endif - - # -+# jp-embedded Q5 board -+# -+ifdef CONFIG_MIPS_Q5 -+LIBS += arch/mips/jp-embedded/q5/q5.o \ -+ arch/mips/au1000/common/au1000.o -+SUBDIRS += arch/mips/jp-embedded/q5 arch/mips/au1000/common -+LOADADDR := 0x80100000 -+endif -+ -+# - # Au1x00 (AMD/Alchemy) eval boards - # - ifdef CONFIG_MIPS_DB1000 -diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c ---- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c 2005-01-19 09:09:26.000000000 -0500 -+++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c 2005-09-10 17:47:29.000000000 -0400 -@@ -101,7 +101,7 @@ - - void __init pcibios_fixup_irqs(void) - { --#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) -+#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 ) - unsigned int slot; - unsigned char pin; - struct pci_dev *dev; -diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in ---- linux-2.4.31.org/arch/mips/config-shared.in 2005-01-19 09:09:27.000000000 -0500 -+++ linux-2.4.31/arch/mips/config-shared.in 2005-08-23 00:30:32.000000000 -0400 -@@ -31,6 +31,7 @@ - dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 -+dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32 - dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32 - dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32 - dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32 -@@ -277,6 +278,12 @@ - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi -+if [ "$CONFIG_MIPS_Q5" = "y" ]; then -+ define_bool CONFIG_SOC_AU1X00 y -+ define_bool CONFIG_SOC_AU1500 y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_PC_KEYB y -+fi - if [ "$CONFIG_MIPS_DB1000" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1000 y -@@ -729,6 +736,7 @@ - "$CONFIG_MIPS_PB1000" = "y" -o \ - "$CONFIG_MIPS_PB1100" = "y" -o \ - "$CONFIG_MIPS_PB1500" = "y" -o \ -+ "$CONFIG_MIPS_Q5" = "y" -o \ - "$CONFIG_NEC_OSPREY" = "y" -o \ - "$CONFIG_NEC_EAGLE" = "y" -o \ - "$CONFIG_NINO" = "y" -o \ -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile 2005-09-10 16:46:20.000000000 -0400 -@@ -0,0 +1,9 @@ -+USE_STANDARD_AS_RULE := true -+ -+O_TARGET := q5.o -+ -+export-objs = init.o -+ -+obj-y := init.o board_setup.o irqmap.o -+ -+include $(TOPDIR)/Rules.make -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c 2005-08-30 14:46:21.000000000 -0400 -@@ -0,0 +1,97 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * jp-embedded Q5 board setup. -+ * -+ * Author: jp@jp-embedded.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/config.h> -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/ioport.h> -+#include <linux/mm.h> -+#include <linux/console.h> -+#include <linux/mc146818rtc.h> -+#include <linux/delay.h> -+ -+#include <asm/cpu.h> -+#include <asm/bootinfo.h> -+#include <asm/irq.h> -+#include <asm/keyboard.h> -+#include <asm/mipsregs.h> -+#include <asm/reboot.h> -+#include <asm/pgtable.h> -+#include <asm/au1000.h> -+#include <asm/pb1500.h> -+ -+#ifdef CONFIG_USB_OHCI -+// Enable the workaround for the OHCI DoneHead -+// register corruption problem. -+#define CONFIG_AU1000_OHCI_FIX -+#endif -+ -+#ifdef CONFIG_RTC -+extern struct rtc_ops pb1500_rtc_ops; -+#endif -+ -+void board_reset (void) -+{ -+ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */ -+ au_writel(0x00000000, 0xAE00001C); -+} -+ -+void __init board_setup(void) -+{ -+ u32 pin_func; -+ u32 sys_freqctrl, sys_clksrc; -+ -+#ifdef CONFIG_PCI -+ // Setup PCI bus controller -+ au_writel(0, Au1500_PCI_CMEM); -+ au_writel(0x00003fff, Au1500_CFG_BASE); -+ au_writel(0xf, Au1500_PCI_CFG); -+ au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); -+ au_writel(0, Au1500_PCI_MWBASE_REV_CCL); -+ au_writel(0x02a00356, Au1500_PCI_STATCMD); -+ au_writel(0x00003c04, Au1500_PCI_HDRTYPE); -+ au_writel(0x00000008, Au1500_PCI_MBAR); -+ au_sync(); -+#endif -+ -+ /* Enable sys bus clock divider when IDLE state or no bus activity. */ -+ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); -+ -+#ifdef CONFIG_RTC -+ rtc_ops = &pb1500_rtc_ops; -+ // Enable the RTC if not already enabled -+ if (!(au_readl(0xac000028) & 0x20)) { -+ printk("enabling clock ...\n"); -+ au_writel((au_readl(0xac000028) | 0x20), 0xac000028); -+ } -+ // Put the clock in BCD mode -+ if (readl(0xac00002C) & 0x4) { /* reg B */ -+ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); -+ au_sync(); -+ } -+#endif -+} -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c 2005-09-10 16:43:21.000000000 -0400 -@@ -0,0 +1,80 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * jp-embedded Q5 board setup. -+ * -+ * Author: jp@jp-embedded.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/sched.h> -+#include <linux/bootmem.h> -+#include <asm/addrspace.h> -+#include <asm/bootinfo.h> -+#include <linux/string.h> -+#include <linux/kernel.h> -+#include <linux/sched.h> -+ -+int prom_argc; -+char **prom_argv, **prom_envp; -+extern void __init prom_init_cmdline(void); -+extern char *prom_getenv(char *envname); -+void (*__wbflush) (void); -+ -+void au1500_wbflush(void) -+{ -+ __asm__ volatile ("sync"); -+} -+ -+const char *get_system_type(void) -+{ -+ return "jp-embedded Q5"; -+} -+ -+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) -+{ -+ unsigned char *memsize_str; -+ unsigned long memsize; -+ -+ prom_argc = argc; -+ prom_argv = argv; -+ prom_envp = envp; -+ -+ __wbflush = au1500_wbflush; -+ -+ /* obs */ -+ mips_machgroup = MACH_GROUP_ALCHEMY; -+ mips_machtype = MACH_PB1500; -+ -+ prom_init_cmdline(); -+ memsize_str = prom_getenv("memsize"); -+ if (!memsize_str) { -+ memsize = 0x04000000; -+ } else { -+ memsize = simple_strtol(memsize_str, NULL, 0); -+ } -+ add_memory_region(0, memsize, BOOT_MEM_RAM); -+ return 0; -+} -+ -+EXPORT_SYMBOL(__wbflush); -diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c ---- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c 2005-09-10 16:45:18.000000000 -0400 -@@ -0,0 +1,61 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * jp-embedded Q5 board setup. -+ * -+ * Author: jp@jp-embedded.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+#include <linux/kernel_stat.h> -+#include <linux/module.h> -+#include <linux/signal.h> -+#include <linux/sched.h> -+#include <linux/types.h> -+#include <linux/interrupt.h> -+#include <linux/ioport.h> -+#include <linux/timex.h> -+#include <linux/slab.h> -+#include <linux/random.h> -+#include <linux/delay.h> -+ -+#include <asm/bitops.h> -+#include <asm/bootinfo.h> -+#include <asm/io.h> -+#include <asm/mipsregs.h> -+#include <asm/system.h> -+#include <asm/au1000.h> -+ -+au1xxx_irq_map_t au1xxx_irq_map[] = { -+ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, -+ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, -+ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, -+}; -+ -+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); -+ ---- linux-2.4.31.org/Documentation/Configure.help 2005-04-03 21:42:19.000000000 -0400 -+++ linux-2.4.31/Documentation/Configure.help 2005-09-10 18:50:14.340000000 -0400 -@@ -2197,6 +2197,12 @@ - MIPS-32-based Baget embedded system. This chipset is better known - via the NE2100 cards. - -+jp-embedded Q5 support -+CONFIG_MIPS_Q5 -+ This enables support for jp-embedded's MIPS based boards. The -+ boards uses the AU1500 cpu. For more information about these -+ boards, see <http://www.jp-embedded.com/>. -+ - Support for DECstations - CONFIG_DECSTATION - This enables support for DEC's MIPS based workstations. For details |