diff options
Diffstat (limited to 'target/device/Atmel')
| -rw-r--r-- | target/device/Atmel/AT91_Config.in | 335 | ||||
| -rw-r--r-- | target/device/Atmel/AVR32_Config.in | 82 | ||||
| -rw-r--r-- | target/device/Atmel/Config.in | 62 | ||||
| -rw-r--r-- | target/device/Atmel/Makefile.in | 20 | ||||
| -rw-r--r-- | target/device/Atmel/at91rm9200df/Makefile.in | 6 | ||||
| -rw-r--r-- | target/device/Atmel/at91sam9260dfc/Makefile.in | 22 | ||||
| -rw-r--r-- | target/device/Atmel/at91sam9260pf/Makefile.in | 7 | ||||
| -rw-r--r-- | target/device/Atmel/at91sam9261ek/Makefile.in | 22 | ||||
| -rw-r--r-- | target/device/Atmel/at91sam9263ek/Makefile.in | 18 | ||||
| -rw-r--r-- | target/device/Atmel/at91sam9g20dfc/Makefile.in | 17 | ||||
| -rw-r--r-- | target/device/Atmel/atngw100-base/Makefile.in | 4 | ||||
| -rw-r--r-- | target/device/Atmel/atngw100/Makefile.in | 4 | ||||
| -rw-r--r-- | target/device/Atmel/atstk1005/Makefile.in | 3 | ||||
| -rw-r--r-- | target/device/Atmel/atstk100x/Makefile.in | 4 |
14 files changed, 0 insertions, 606 deletions
diff --git a/target/device/Atmel/AT91_Config.in b/target/device/Atmel/AT91_Config.in deleted file mode 100644 index 77b01bf87..000000000 --- a/target/device/Atmel/AT91_Config.in +++ /dev/null @@ -1,335 +0,0 @@ -comment "Atmel AT91 Specific Device Support" - depends on BR2_arm - -config BR2_TARGET_AT91 - bool "Board support for the Atmel AT91 range of microprocessors" - depends on BR2_arm - help - Atmel AT91 ARM based systems - -comment "Selection criteria" - depends on BR2_TARGET_AT91 - -config BR2_TARGET_ATMEL_ALL - bool "Allow all ARM targets" - depends on BR2_TARGET_AT91 - default y - -config BR2_TARGET_ATMEL_NET - bool "With network controller" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_ALL - default y - -config BR2_TARGET_ATMEL_LCD - bool "With LCD controller" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_ALL - -config BR2_TARGET_ATMEL_FPDSP - bool "With Floating Point DSP" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_ALL - -config BR2_TARGET_ATMEL_MPB - bool "With customizable MP-Block" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_ALL - -comment "Device Selection" - depends on BR2_TARGET_AT91 - -choice - prompt "AT91 device" - depends on BR2_TARGET_AT91 - default BR2_TARGET_AT91SAM9260 - help - Select the specific AT91 chip you wish to use. - -config BR2_TARGET_AT91RM9200 - bool "Atmel AT91RM9200 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_LCD - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - help - Atmel AT91RM9200 ARM based systems - -config BR2_TARGET_AT91SAM9260 - bool "Atmel AT91SAM9260 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_LCD - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - help - Atmel AT91SAM9260 ARM based systems - -config BR2_TARGET_AT91SAM9G20 - bool "Atmel AT91SAM9G20 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_LCD - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - help - Atmel AT91SAM9G20 ARM based systems - -config BR2_TARGET_AT91SAM9261 - bool "Atmel AT91SAM9261 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_NET - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - help - Atmel AT91SAM9261 ARM based systems - -config BR2_TARGET_AT91SAM9261S - bool "Atmel AT91SAM9261S Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_NET - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91SAM9261 ARM based systems (Not Yet Implemented) - -config BR2_TARGET_AT91SAM9RL64 - bool "Atmel AT91SAM9RL64 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_NET - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91SAM9RL64 ARM based systems (Not Yet Implemented) - -config BR2_TARGET_AT91SAM9263 - bool "Atmel AT91SAM9263 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - help - Atmel AT91SAM9263 ARM based systems - -config BR2_TARGET_AT91SAM9G40 - bool "Atmel AT91SAM9G40 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91SAM9G40 ARM based systems - -config BR2_TARGET_AT91SAM9G45 - bool "Atmel AT91SAM9G45 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - help - Atmel AT91SAM9G45 ARM based systems - -config BR2_TARGET_AT91SAM9M10 - bool "Atmel AT91SAM9M10 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91SAM9M10 ARM based systems - -config BR2_TARGET_AT91SAM9M11 - bool "Atmel AT91SAM9M11 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91SAM9M11 ARM based systems - -config BR2_TARGET_AT91SAM9XE - bool "Atmel AT91SAM9XE Microprocessors" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_LCD - depends on !BR2_TARGET_ATMEL_FPDSP - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91SAM9263 ARM based systems (Not Yet Implemented) - -config BR2_TARGET_AT572D940HF - bool "Atmel AT572D940HF Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_LCD - depends on !BR2_TARGET_ATMEL_MPB - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT572D940 ARM based systems - -config BR2_TARGET_AT91CAP9 - bool "Atmel AT91CAP9 Microprocessor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_ATMEL_FPDSP - depends on ! BR2_TARGET_AT91_ADVANCED_INFO - help - Atmel AT91CAP9 ARM based systems - -endchoice - -comment "Development Board Selection" - depends on BR2_TARGET_AT91 - -choice - prompt "Development Board support" - depends on BR2_TARGET_AT91 - default BR2_TARGET_AT91SAM9260DFC - help - Select the specific AT91 development board you wish to use. - -config BR2_TARGET_AT91RM9200DF - bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support" - depends on BR2_TARGET_AT91RM9200 - select BR2_BOOTSOURCE_DATAFLASHCARD - help - The Atmel AT91RM9200EK Development Board using Dataflashcard - -config BR2_TARGET_AT91RM9200EK - bool "Atmel AT91RM9200EK Development Board Support" - depends on BR2_TARGET_AT91RM9200 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_FLASH - help - The Atmel AT91RM9200EK Development Board - -config BR2_TARGET_AT91RM9200DK - bool "Atmel AT91RM9200DK Development Board Support" - depends on BR2_TARGET_AT91RM9200 - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_FLASH - help - The Atmel AT91RM9200DK Development Board - -config BR2_TARGET_AT91SAM9260DFC - bool "Atmel AT91SAM9260DFC" - depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - help - The Atmel AT91SAM9260 Development Board booting from Dataflashcard - -config BR2_TARGET_AT91SAM9260EK - bool "Atmel AT91SAM9260EK" - depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91SAM9260 Development Board booting from dataflash - -config BR2_TARGET_AT91SAM9G20DFC - bool "Atmel AT91SAM9G20DFC" - depends on BR2_TARGET_AT91SAM9G20 - select BR2_BOOTSOURCE_DATAFLASHCARD - help - The Atmel AT91SAM9G20 Development Board booting from Dataflashcard - -config BR2_TARGET_AT91SAM9G20EK - bool "Atmel AT91SAM9G20EK" - depends on BR2_TARGET_AT91SAM9G20 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91SAM9G20 Development Board booting from dataflash - -config BR2_TARGET_AT91SAM9XEEK - bool "Atmel AT91SAM9XE-EK" - depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91SAM9xe Development Board (Not Yet Implemented) - -config BR2_TARGET_AT91SAM9261EK - bool "Atmel AT91SAM9261EK" - depends on BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91SAM9261 Development Board - -config BR2_TARGET_AT91SAM9RL64EK - bool "Atmel AT91SAM9RL64EK" - depends on BR2_TARGET_AT91SAM9RL64 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - select BR2_BOOTSOURCE_SDCARD - help - The Atmel AT91SAM9RL64 Development Board - -config BR2_TARGET_AT91SAM9263EK - bool "Atmel AT91SAM9263EK" - depends on BR2_TARGET_AT91SAM9263 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91SAM9263 Development Board - -config BR2_TARGET_AT91SAM9G45EKES - bool "Atmel AT91SAM9G45EKES" - depends on BR2_TARGET_AT91SAM9G45 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91SAM9G45 Development Board - -config BR2_TARGET_AT572D940DCM - bool "Atmel AT572D940 Diopsis Computer Module" - depends on BR2_TARGET_AT572D940HF - select BR2_BOOTSOURCE_FLASH - select BR2_BOOTSOURCE_SDCARD - help - The Atmel Diopsis CPU Module (Not Yet Implemented) - -config BR2_TARGET_AT91CAP9DK - bool "Atmel AT91CAP9DK" - depends on BR2_TARGET_AT91CAP9 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91CAP9 Development Kit (Not Yet Implemented) - -config BR2_TARGET_AT91CAP9ADK - bool "Atmel AT91CAP9ADK" - depends on BR2_TARGET_AT91CAP9 - select BR2_BOOTSOURCE_DATAFLASHCARD - select BR2_BOOTSOURCE_DATAFLASH - select BR2_BOOTSOURCE_NANDFLASH - help - The Atmel AT91CAP9 Starter Kit (Not Yet Implemented) - -endchoice - -choice - prompt "SPI Mode" - depends on BR2_TARGET_AT91SAM9261EK - default BR2_TARGET_AT91SAM9261EK_SPIMODE0 - help - Select SPI Mode 0 or 3 - -config BR2_TARGET_AT91SAM9261EK_SPIMODE0 - bool "SPI Mode 0" - depends on BR2_TARGET_AT91SAM9261EK - help - Use SPI Mode 0, Required for AT45DB642D chips - -config BR2_TARGET_AT91SAM9261EK_SPIMODE3 - bool "SPI Mode 3" - depends on BR2_TARGET_AT91SAM9261EK - help - Use SPI Mode 3 - -endchoice - - diff --git a/target/device/Atmel/AVR32_Config.in b/target/device/Atmel/AVR32_Config.in deleted file mode 100644 index 7ae9fd4ed..000000000 --- a/target/device/Atmel/AVR32_Config.in +++ /dev/null @@ -1,82 +0,0 @@ -comment "Atmel AVR32 Specific Device Support" - depends on BR2_avr32 - -config BR2_TARGET_AVR32 - bool "Board support for the Atmel AP7 microprocessors" - depends on BR2_avr32 - help - Atmel AT32AP7XXX AVR32 based systems - -choice - prompt "AVR32 device" - depends on BR2_TARGET_AVR32 - default BR2_TARGET_AT32AP7000 - help - Select the specific AVR32 chip you wish to use. - -config BR2_TARGET_AT32AP7000 - bool "Board support for the Atmel AT32AP7000 Microprocessor" - depends on BR2_TARGET_AVR32 - help - Atmel AT32AP7000 AVR32 based systems - -config BR2_TARGET_AT32AP7001 - bool "Board support for the Atmel AT32AP7001 Microprocessor" - depends on BR2_TARGET_AVR32 - help - Atmel AT32AP7001 AVR32 based systems - -config BR2_TARGET_AT32AP7002 - bool "Board support for the Atmel AT32AP7002 Microprocessor" - depends on BR2_TARGET_AVR32 - help - Atmel AT32AP7002 AVR32 based systems - -config BR2_TARGET_AT32AP7200 - bool "Board support for the Atmel AT32AP7200 Microprocessor" - depends on BR2_TARGET_AVR32 - help - Atmel AT32AP7200 AVR32 based systems - -endchoice - -comment "Development board support" - depends on BR2_TARGET_AVR32 - -choice - prompt "Development board support" - depends on BR2_TARGET_AVR32 - default BR2_TARGET_AVR32_ATSTK1000 - help - Select the specific AVR32 development board you wish to use. - -config BR2_TARGET_AVR32_ATSTK1002 - bool "Atmel ATSTK1000/2 AVR32 development board support" - depends on BR2_TARGET_AT32AP7000 - select BR2_PACKAGE_LINUX - help - The Atmel ATSTK1000 AVR32 Development Board. - -config BR2_TARGET_AVR32_ATSTK1005 - bool "Atmel ATSTK1000/5 AVR32 development board support" - depends on BR2_TARGET_AT32AP7200 - select BR2_PACKAGE_LINUX - help - The Atmel ATSTK1000 AVR32 Development Board, - with the AT32AP7200 based top board - -config BR2_TARGET_AVR32_ATNGW100 - bool "Atmel AVR32 network gateway board support" - depends on BR2_TARGET_AT32AP7000 - select BR2_PACKAGE_LINUX - help - The Atmel AVR32 Network Gateway Board. - -config BR2_TARGET_AVR32_ATNGW100_BASE - bool "Atmel AVR32 basic network gateway board support" - depends on BR2_TARGET_AT32AP7000 - select BR2_PACKAGE_LINUX - help - Very simple configuration for the Atmel AVR32 Network Gateway Board. - -endchoice diff --git a/target/device/Atmel/Config.in b/target/device/Atmel/Config.in deleted file mode 100644 index 1433af486..000000000 --- a/target/device/Atmel/Config.in +++ /dev/null @@ -1,62 +0,0 @@ -menuconfig BR2_TARGET_ATMEL - bool "Atmel Device Support" - depends on BR2_arm || BR2_avr32 - -if BR2_TARGET_ATMEL - -source "target/device/Atmel/AT91_Config.in" -source "target/device/Atmel/AVR32_Config.in" - -config BR2_BOARD_NAME - string - default "at91rm9200df" if BR2_TARGET_AT91RM9200DF - default "at91rm9200se" if BR2_TARGET_AT91RM9200SE - default "at91rm9200ek" if BR2_TARGET_AT91RM9200EK - default "at91rm9200dk" if BR2_TARGET_AT91RM9200DK - default "at91sam9260ek" if BR2_TARGET_AT91SAM9260EK - default "at91sam9260dfc" if BR2_TARGET_AT91SAM9260DFC - default "at91sam9261ek" if BR2_TARGET_AT91SAM9261EK - default "at91sam9262ek" if BR2_TARGET_AT91SAM9262EK - default "at91sam9263ek" if BR2_TARGET_AT91SAM9263EK - default "at91sam9xeek" if BR2_TARGET_AT91SAM9XEEK - default "at91sam9g20ek" if BR2_TARGET_AT91SAM9G20EK - default "at91sam9g20dfc" if BR2_TARGET_AT91SAM9G20DFC - default "at91sam9g45ekes" if BR2_TARGET_AT91SAM9G45EKES - default "at91sam9m10ek" if BR2_TARGET_AT91SAM9M10EK - default "at91sam9m10dfc" if BR2_TARGET_AT91SAM9M10DFC - default "atstk100x" if BR2_TARGET_AVR32_ATSTK1002 - default "atstk1005" if BR2_TARGET_AVR32_ATSTK1005 - default "atngw100" if BR2_TARGET_AVR32_ATNGW100 - default "atngw100-base" if BR2_TARGET_AVR32_ATNGW100_BASE - default "atngw100-expanded" if BR2_TARGET_AVR32_ATNGW100_EXPANDED - -config BR2_TARGET_AT91_ADVANCED_INFO - bool "Remove work in progress" - depends on BR2_TARGET_AT91 - default y - help - Atmel AT91 ARM based systems - -comment "Package support" - depends on BR2_TARGET_AT91 || BR2_TARGET_AVR32 - - -menu "Secondary locations" - -config BR2_AT91_LINUXPATCH_SITE - string "AT91 Linux Patch mirror site" - depends on BR2_TARGET_AT91 - default "http://maxim.org.za/AT91RM9200/2.6" - help - Main download location for AT91 Linux stuff - -config BR2_BOARD_PATH - string "Atmel board repository" - depends on BR2_TARGET_AT91 || BR2_TARGET_AVR32 - default "target/device/Atmel/$(BR2_BOARD_NAME)" - help - Top directory of Atmel board configurations - -endmenu - -endif diff --git a/target/device/Atmel/Makefile.in b/target/device/Atmel/Makefile.in deleted file mode 100644 index 5dacfdef6..000000000 --- a/target/device/Atmel/Makefile.in +++ /dev/null @@ -1,20 +0,0 @@ -# ******************************************************************* - -ifeq ($(BR2_TARGET_ATMEL),y) -ATMEL_PATH:=target/device/Atmel - -BOARD_NAME:=$(call qstrip,$(BR2_BOARD_NAME)) -BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH)) - -ATMEL_TARGET:=$(ATMEL_PATH)/root -TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton -TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz - -ifeq ($(BR2_avr32),y) -KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2 -endif - -# Update things in board specific makefiles -include target/device/Atmel/*/Makefile.in - -endif diff --git a/target/device/Atmel/at91rm9200df/Makefile.in b/target/device/Atmel/at91rm9200df/Makefile.in deleted file mode 100644 index 1ef7dc239..000000000 --- a/target/device/Atmel/at91rm9200df/Makefile.in +++ /dev/null @@ -1,6 +0,0 @@ -ifeq ($(strip $(BOARD_NAME)),at91rm9200df) -LINUX_BOARD_NAME:=at91rm9200ek -UBOOT_BOARD_NAME:=at91rm9200df -endif - - diff --git a/target/device/Atmel/at91sam9260dfc/Makefile.in b/target/device/Atmel/at91sam9260dfc/Makefile.in deleted file mode 100644 index b3a4d2447..000000000 --- a/target/device/Atmel/at91sam9260dfc/Makefile.in +++ /dev/null @@ -1,22 +0,0 @@ -ifeq ($(strip $(BOARD_NAME)),at91sam9260dfc) -LINUX26_BOARD_NAME=at91sam9260ek -ifeq ($(U_BOOT_VERSION),1.2.0-atmel) -UBOOT_BOARD_NAME:=at91sam9260dfc -else - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),) -UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs0 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),) -UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs1 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),) -UBOOT_BOARD_NAME:=at91sam9260ek_nandflash -endif - -endif - -endif - diff --git a/target/device/Atmel/at91sam9260pf/Makefile.in b/target/device/Atmel/at91sam9260pf/Makefile.in deleted file mode 100644 index b43b670d6..000000000 --- a/target/device/Atmel/at91sam9260pf/Makefile.in +++ /dev/null @@ -1,7 +0,0 @@ -ifeq ($(BOARD_NAME),at91sam9260pf) -LINUX26_BOARD_NAME=at91sam9260ek -UBOOT_BOARD_NAME:=at91sam9260ek -# Not functional for U-Boot -# This needs to have a header file at91sam9260pf.h -# which puts the environment in parallell flash -endif diff --git a/target/device/Atmel/at91sam9261ek/Makefile.in b/target/device/Atmel/at91sam9261ek/Makefile.in deleted file mode 100644 index 23b5c6d8a..000000000 --- a/target/device/Atmel/at91sam9261ek/Makefile.in +++ /dev/null @@ -1,22 +0,0 @@ -ifeq ($(strip $(BOARD_NAME)),at91sam9261ek) -LINUX_BOARD_NAME:=at91sam9261ek -ifeq ($(U_BOOT_VERSION),1.2.0-atmel) -UBOOT_BOARD_NAME:=at91sam9261ek -else -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),) -UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0 -# use CS0 since we have to route CS0 to the SDcard -# to allow boot from a card. -# Note possible conflict with CS3 which needs to be -# disabled both in U-Boot and in Linux -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),) -UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),) -UBOOT_BOARD_NAME:=at91sam9261ek_nandflash -endif -endif -endif diff --git a/target/device/Atmel/at91sam9263ek/Makefile.in b/target/device/Atmel/at91sam9263ek/Makefile.in deleted file mode 100644 index 2f51a8ba5..000000000 --- a/target/device/Atmel/at91sam9263ek/Makefile.in +++ /dev/null @@ -1,18 +0,0 @@ -ifeq ($(strip $(BOARD_NAME)),at91sam9263ek) -LINUX_BOARD_NAME:=at91sam9263ek -ifeq ($(U_BOOT_VERSION),1.2.0-atmel) -UBOOT_BOARD_NAME:=at91sam9263ek -else -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),) -UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs0 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),) -UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs1 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),) -UBOOT_BOARD_NAME:=at91sam9263ek_nandflash -endif -endif -endif diff --git a/target/device/Atmel/at91sam9g20dfc/Makefile.in b/target/device/Atmel/at91sam9g20dfc/Makefile.in deleted file mode 100644 index 0b023fde8..000000000 --- a/target/device/Atmel/at91sam9g20dfc/Makefile.in +++ /dev/null @@ -1,17 +0,0 @@ -ifeq ($(strip $(BOARD_NAME)),at91sam9g20dfc) -LINUX26_BOARD_NAME=at91sam9g20ek - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),) -UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs0 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),) -UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs1 -endif - -ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),) -UBOOT_BOARD_NAME:=at91sam9g20ek_nandflash -endif - -endif - diff --git a/target/device/Atmel/atngw100-base/Makefile.in b/target/device/Atmel/atngw100-base/Makefile.in deleted file mode 100644 index c2f296970..000000000 --- a/target/device/Atmel/atngw100-base/Makefile.in +++ /dev/null @@ -1,4 +0,0 @@ -ifeq ($(BR2_TARGET_AVR32_ATNGW100_BASE),y) -UBOOT_BOARD_NAME:=atngw100 -TARGET_SKELETON=$(BOARD_PATH)/target_skeleton -endif diff --git a/target/device/Atmel/atngw100/Makefile.in b/target/device/Atmel/atngw100/Makefile.in deleted file mode 100644 index 7e02d8e83..000000000 --- a/target/device/Atmel/atngw100/Makefile.in +++ /dev/null @@ -1,4 +0,0 @@ -ifeq ($(BR2_TARGET_AVR32_ATNGW100),y) -UBOOT_BOARD_NAME:=atngw100 -TARGET_SKELETON=$(BOARD_PATH)/target_skeleton -endif diff --git a/target/device/Atmel/atstk1005/Makefile.in b/target/device/Atmel/atstk1005/Makefile.in deleted file mode 100644 index 84b31070d..000000000 --- a/target/device/Atmel/atstk1005/Makefile.in +++ /dev/null @@ -1,3 +0,0 @@ -ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1005)),y) -TARGET_SKELETON=$(BOARD_PATH)/target_skeleton -endif diff --git a/target/device/Atmel/atstk100x/Makefile.in b/target/device/Atmel/atstk100x/Makefile.in deleted file mode 100644 index 395c74a6e..000000000 --- a/target/device/Atmel/atstk100x/Makefile.in +++ /dev/null @@ -1,4 +0,0 @@ -ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y) -UBOOT_BOARD_NAME:=atstk1002 -TARGET_SKELETON=$(BOARD_PATH)/target_skeleton -endif |