diff options
Diffstat (limited to 'target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad')
| -rw-r--r-- | target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad b/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad new file mode 100644 index 000000000..59ba37cd9 --- /dev/null +++ b/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad @@ -0,0 +1,149 @@ +############################################################# +# +# U-Boot +# +############################################################# +U_BOOT_VERSION:=1.3.0 +U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2 +U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot +U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION) +U_BOOT_CAT:=$(BZCAT) +U_BOOT_BIN:=u-boot.bin +U_BOOT_TOOLS_BIN:=mkimage + +U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h + +$(DL_DIR)/$(U_BOOT_SOURCE): + $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE) + +$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE) + $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \ + | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) - + toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \ + u-boot-$(U_BOOT_VERSION)-\*.patch\* + touch $@ + +$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked +ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"") + @if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \ + echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \ + echo " but the file at:"; \ + echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \ + echo " does not exist."; \ + echo; \ + echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \ + echo; \ + exit 1; \ + fi + cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE) +endif + touch $@ + +$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied +ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"") + @echo + @echo " You did not specify a target u-boot config board, so u-boot" + @echo " has no way of knowing which board you want to build your" + @echo " bootloader for." + @echo + @echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable." + @echo + @exit 1 +endif + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + $(MAKE) -C $(U_BOOT_DIR) \ + $(BR2_TARGET_U_BOOT_CONFIG_BOARD) + touch $@ + +$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured + # Modify configuration header in $(U_BOOT_INC_CONF_FILE) + @echo >> $(U_BOOT_INC_CONF_FILE) + @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE) + @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) + @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) +ifneq ($(strip $(BR2_PROJECT)),"") + @echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"") + @echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"") + @echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"") + @echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"") + @echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE) +endif +endif # end BR2_TARGET_U_BOOT_IPADDR +ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"") + @echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"") + @echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"") + @echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE) + @echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"") + @echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE) + @echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE) +endif + @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE) + touch $@ + +$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + $(MAKE) -C $(U_BOOT_DIR) + +$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN) + cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR) + cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/ + +u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN) + +u-boot-clean: + $(MAKE) -C $(U_BOOT_DIR) clean + +u-boot-dirclean: + rm -rf $(U_BOOT_DIR) + +u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE) + +############################################################# +# +# Toplevel Makefile options +# +############################################################# +ifeq ($(strip $(BR2_TARGET_U_BOOT)),y) +TARGETS+=u-boot +endif + +u-boot-status: + @echo + @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE) + @echo + @echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) + @echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD) + @echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP) + @echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR) + @echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY) + @echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK) + @echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR) + @echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR) + @echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS) + @echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD) + @echo + @exit 0 |