diff options
Diffstat (limited to 'target/device/Atmel/u-boot/Config.in')
| -rw-r--r-- | target/device/Atmel/u-boot/Config.in | 115 |
1 files changed, 87 insertions, 28 deletions
diff --git a/target/device/Atmel/u-boot/Config.in b/target/device/Atmel/u-boot/Config.in index 62988ebe4..edefb52bb 100644 --- a/target/device/Atmel/u-boot/Config.in +++ b/target/device/Atmel/u-boot/Config.in @@ -1,44 +1,103 @@ -config BR2_TARGET_UBOOT - bool "Das U-Boot Boot Monitor" - depends on BR2_TARGET_AT91 - depends on !BR2_TARGET_AT91SAM9260PF +config BR2_TARGET_U_BOOT + bool "u-boot" default n + depends on BR2_avr32 || BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_m68k || BR2_mips || BR2_nios2 help - Build "Das U-Boot" Boot Monitor + U-Boot, the universal boot loader for multiple platforms and target + boards. -config BR2_TARGET_UBOOT_SERVERIP - string "server ip" - depends on BR2_TARGET_UBOOT - default "10.175.196.221" + http://www.denx.de/wiki/UBoot/ + +config BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE + string "U-Boot config header file" + depends on BR2_TARGET_U_BOOT + help + Set this variable to a file containing a U-Boot configuration for the + target board. This file will be copied into the U-Boot directory + include/configs. + +config BR2_TARGET_U_BOOT_CONFIG_BOARD + string "U-Boot target board configuration" + depends on BR2_TARGET_U_BOOT help - TFTP server ip address + Set this variable to the target board you want to configure U-Boot + for. This will use the default options for this board in U-Boot and + build accordingly. + + For example "atstk1002_config" for ATSTK1000 with ATSTK1002 top + module for the AVR32 starter kit. -config BR2_TARGET_UBOOT_IPADDR - string "ip address" - depends on BR2_TARGET_UBOOT - default "10.175.196.18" +config BR2_TARGET_U_BOOT_SERVERIP + string "Server IP" + depends on BR2_TARGET_U_BOOT + default "192.168.0.1" help - TFTP server ip address + The IP address for the remote server providing TFTP services. -config BR2_TARGET_UBOOT_GATEWAY - string "gateway ip" - depends on BR2_TARGET_UBOOT - default "10.175.196.1" +config BR2_TARGET_U_BOOT_IPADDR + string "Target IP address" + depends on BR2_TARGET_U_BOOT + default "192.168.0.42" help - Gateway ip address + Target board IP address, only set this if you intend to use a fixed + address (i.e. no DHCP). A blanc target IP address will allow the + board to use DHCP. -config BR2_TARGET_UBOOT_NETMASK +config BR2_TARGET_U_BOOT_GATEWAY + string "Gateway IP" + depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != "" + default "192.168.0.1" + help + Set the gateway IP address if you need to connect to a machine + outside the netmask for the network. + +config BR2_TARGET_U_BOOT_NETMASK string "netmask" - depends on BR2_TARGET_UBOOT + depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != "" default "255.255.255.0" help - Network Mask + Network mask for the target board network. + +config BR2_TARGET_U_BOOT_ETH0ADDR + string "Ethernet 0 address" + depends on BR2_TARGET_U_BOOT + help + Target board MAC address for interface 0. You should have a MAC + address range provided by the company who made you MAC hardware. + +config BR2_TARGET_U_BOOT_ETH1ADDR + string "Ethernet 1 address" + depends on BR2_TARGET_U_BOOT + help + Target board MAC address for interface 1. You should have a MAC + address range provided by the company who made you MAC hardware. + +config BR2_TARGET_U_BOOT_BOOTARGS + string "Boot arguments" + depends on BR2_TARGET_U_BOOT + default "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2" + help + Set the boot arguments in U-Boot to let it boot the way you prefer by + default. Typoes here will result in a non-booting target board. + + Example booting from MMC/SD-card: + console=ttyS0 root=/dev/mmcblk0p1 + + Example booting from flash devices (NOR, NAND, DataFlash, etc): + console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 -config BR2_TARGET_UBOOT_ETHADDR - string "Ethernet address" - depends on BR2_TARGET_UBOOT - default "04:25:fe:ed:00:18" +config BR2_TARGET_U_BOOT_BOOTCMD + string "Boot command" + depends on BR2_TARGET_U_BOOT + default "fsload /boot/$(LINUX26_FORMAT); bootm" help - Target ip address, this should be changed for production units + Set the boot command in U-Boot which specifies how U-Boot should load + your kernel image, or if you want to do other commands automatically + when U-Boot starts. + Loading a kernel from MMC/SD-card: + mmcinit; ext2load mmc 0:1 <RAM address> + /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm + Loading a kernel from flash devices (NOR, NAND, DataFlash, etc): + fsload <RAM address> /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm |