summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/atstk1002/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch')
-rw-r--r--target/device/Atmel/atstk1002/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch130
1 files changed, 0 insertions, 130 deletions
diff --git a/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch b/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch
deleted file mode 100644
index 365ee494d..000000000
--- a/target/device/Atmel/atstk1002/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch
+++ /dev/null
@@ -1,130 +0,0 @@
->From 9c5fa914202d20756c56e0c4fd76035ed8f8ced8 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
-Date: Mon, 6 Aug 2007 08:31:14 +0200
-Subject: [PATCH 1/1] Add gpio_mouse board setup to atstk1000 board
-
-This patch adds a gpio_mouse_platform_data to the atstk1000 board code and
-registers a gpio_mouse platform_device. This will enable a GPIO mouse on header
-J1 on GPIO of the ATSTK1000 development kit. The board code is enabled/disabled
-in menuconfig.
-
-By connecting J1 (GPIO) to J25 (SWITCH) you can use the following keys to
-simulate a mouse:
-
-SW0: right
-SW1: down
-SW2: up
-SW3: left
-SW5: right button
-SW6: middle button
-SW7: left button
-
-Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
----
- arch/avr32/boards/atstk1000/Kconfig | 16 ++++++++++
- arch/avr32/boards/atstk1000/atstk1002.c | 48 +++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 0 deletions(-)
-
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..d99d4bd 100644
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -52,6 +52,22 @@ config BOARD_ATSTK100X_SPI1
- GPIO lines and accessed through the J1 jumper block. Say "y"
- here to configure that SPI controller.
-
-+config BOARD_ATSTK1002_GPIO_MOUSE
-+ bool "Configure gpio_mouse on GPIO J1 header"
-+ depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+ help
-+ Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
-+ 10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
-+ mouse inputs using the the switches SW0 to SW7.
-+
-+ SW0: right
-+ SW1: down
-+ SW2: up
-+ SW3: left
-+ SW5: right button
-+ SW6: middle button
-+ SW7: left button
-+
- config BOARD_ATSTK1000_J2_LED
- bool
- default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c958fd4..c7560e5 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -16,6 +16,7 @@
- #include <linux/types.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
-
- #include <video/atmel_lcdc.h>
-
-@@ -100,6 +101,49 @@ static struct mci_platform_data __initdata mci0_data = {
- .cs = 4,
- };
-
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
-+ {
-+ {
-+ .up = GPIO_PIN_PB(2),
-+ .down = GPIO_PIN_PB(1),
-+ .left = GPIO_PIN_PB(3),
-+ .right = GPIO_PIN_PB(0),
-+ .bleft = GPIO_PIN_PB(7),
-+ .bmiddle = GPIO_PIN_PB(6),
-+ .bright = GPIO_PIN_PB(5),
-+ },
-+ },
-+ .scan_ms = 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+ .name = "gpio_mouse",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_mouse0_data,
-+ },
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+ struct platform_device *pdev = &gpio_mouse0_device;
-+ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+ at32_select_gpio(data->up, 0);
-+ at32_select_gpio(data->down, 0);
-+ at32_select_gpio(data->left, 0);
-+ at32_select_gpio(data->right, 0);
-+
-+ at32_select_gpio(data->bleft, 0);
-+ at32_select_gpio(data->bmiddle, 0);
-+ at32_select_gpio(data->bright, 0);
-+
-+ platform_device_register(pdev);
-+}
-+#endif
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -269,6 +313,10 @@ static int __init atstk1002_init(void)
- atstk1000_setup_j2_leds();
- atstk1002_setup_extdac();
-
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+ add_device_gpio_mouse0();
-+#endif
-+
- return 0;
- }
- postcore_initcall(atstk1002_init);
---
-1.5.2.3
-