diff options
Diffstat (limited to 'target/device/Atmel/atngw100/target_skeleton')
8 files changed, 54 insertions, 18 deletions
diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/hosts b/target/device/Atmel/atngw100/target_skeleton/etc/hosts index b24a953a3..9d8c7b8e9 100644 --- a/target/device/Atmel/atngw100/target_skeleton/etc/hosts +++ b/target/device/Atmel/atngw100/target_skeleton/etc/hosts @@ -1,10 +1,9 @@ 127.0.0.1 localhost.localdomain localhost -127.0.1.1 ngw.example.net ngw +10.0.0.1 ngw.example.net ngw # The following lines are desirable for IPv6 capable hosts ::1 localhost ::1 ip6-localhost ip6-loopback -::1 ngw.example.net ngw fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/httpd.conf b/target/device/Atmel/atngw100/target_skeleton/etc/httpd.conf index 86263f1e9..640f8150d 100644 --- a/target/device/Atmel/atngw100/target_skeleton/etc/httpd.conf +++ b/target/device/Atmel/atngw100/target_skeleton/etc/httpd.conf @@ -1,6 +1,2 @@ # Allow all trafic A: * - -.asp:text/html -/cgi-bin/webif:root:roota -/cgi-bin/webif:admin:roota diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S00mountvirtfs b/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S00mountvirtfs index 61c589102..d9e5c9249 100755 --- a/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S00mountvirtfs +++ b/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S00mountvirtfs @@ -58,6 +58,8 @@ if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then mkdir_fs /dev/pts mount_fs pts /dev/pts devpts mkdir_fs /dev/shm + # g_serial is not detected by mdev. + mknod /dev/ttygserial c 127 0 fi mount_fs config /config configfs diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S40telnetd b/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S40telnetd index b253c1036..e0fd2f2f3 100755 --- a/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S40telnetd +++ b/target/device/Atmel/atngw100/target_skeleton/etc/init.d/S40telnetd @@ -8,7 +8,7 @@ if [ ! -x "${TELNETD}" ]; then exit 1 fi -if ${TELNETD} -l /bin/ash; then +if ${TELNETD} -l /bin/sh; then echo "done" else echo "failed" diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/inittab b/target/device/Atmel/atngw100/target_skeleton/etc/inittab index b135bf2b6..539edb7fb 100644 --- a/target/device/Atmel/atngw100/target_skeleton/etc/inittab +++ b/target/device/Atmel/atngw100/target_skeleton/etc/inittab @@ -1,8 +1,7 @@ # Inittab for the ATNGW100 development board # # Note: BusyBox init doesn't support runlevels. The runlevels field is -# completely ignored by BusyBox init. If you want runlevels, use -# sysvinit. +# completely ignored by BusyBox init. If you want runlevels, use sysvinit. # # Format for each entry: <id>:<runlevels>:<action>:<process> # @@ -11,15 +10,18 @@ # action == one of sysinit, respawn, askfirst, wait, and once # process == program to run -# Run any rc scripts +# Run the rcS script after kernel is booted. ::sysinit:/etc/init.d/rcS -# Run a shell on the first serial port. Comment this out if you want -# a getty instead +# Run a shell on the first serial port. Comment out if you want a getty instead. ttyS0::respawn:-/bin/sh -# Uncomment this to run a getty on the first serial port +# Run a shell on the g_serial port (USB gadget device)? This shell will spawn +# error message if the device is not connected. +#ttygserial::respawn:-/bin/sh + +# Uncomment this to run a getty on the first serial port. #ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 -# Run a script on shutdown +# Run a script on shutdown. ::shutdown:/etc/init.d/rcK diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/proftpd.conf b/target/device/Atmel/atngw100/target_skeleton/etc/proftpd.conf new file mode 100644 index 000000000..59d039087 --- /dev/null +++ b/target/device/Atmel/atngw100/target_skeleton/etc/proftpd.conf @@ -0,0 +1,31 @@ +ServerName "ATNGW100 FTP server" +ServerType standalone +DefaultServer on + +# Port 21 is the standard FTP port. +Port 21 + +# Umask 022 is a good standard umask to prevent new dirs and files +# from being group and world writable. +Umask 022 + +# Note that this ONLY works in standalone mode, in inetd mode you should use an +# inetd server that allows you to limit maximum number of processes per service +# (such as inetd). +MaxInstances 5 + +# Set the user and group under which the server will run. +User nobody +Group nogroup + +# To cause every FTP user to be "jailed" (chrooted) into their home +# directory, uncomment this line. +#DefaultRoot ~ + +# Normally, we want files to be overwriteable. +AllowOverwrite on + +# Deny use of SITE CHMOD, uncomment the three lines below. +#<Limit SITE_CHMOD> +# DenyAll +#</Limit> diff --git a/target/device/Atmel/atngw100/target_skeleton/etc/samba/smb.conf b/target/device/Atmel/atngw100/target_skeleton/etc/samba/smb.conf index b6dddc056..13e46e85d 100644 --- a/target/device/Atmel/atngw100/target_skeleton/etc/samba/smb.conf +++ b/target/device/Atmel/atngw100/target_skeleton/etc/samba/smb.conf @@ -170,10 +170,16 @@ # client code page = 850 #============================ Share Definitions ============================== -;[homes] -; comment = Home Directories -; browseable = no -; writable = yes +[homes] + comment = Home Directories + browseable = no + writable = yes + +[netdisk] + comment = Network share on STK1000 + path = /media + read only = no + public = yes # Un-comment the following and create the netlogon directory for Domain Logons ; [netlogon] diff --git a/target/device/Atmel/atngw100/target_skeleton/tmp/resolv.conf b/target/device/Atmel/atngw100/target_skeleton/tmp/resolv.conf new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/target/device/Atmel/atngw100/target_skeleton/tmp/resolv.conf |