diff options
Diffstat (limited to 'target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch')
| -rw-r--r-- | target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch | 16922 |
1 files changed, 0 insertions, 16922 deletions
diff --git a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch deleted file mode 100644 index 173000063..000000000 --- a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch +++ /dev/null @@ -1,16922 +0,0 @@ -diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c 2008-02-01 14:51:35.000000000 -0500 -@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct - at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ - -+#ifdef CONFIG_FB_INTSRAM -+ { -+ void __iomem *fb; -+ struct resource *fb_res = &lcdc_resources[2]; -+ size_t fb_len = fb_res->end - fb_res->start + 1; -+ -+ fb = ioremap_writecombine(fb_res->start, fb_len); -+ if (fb) { -+ memset(fb, 0, fb_len); -+ iounmap(fb, fb_len); -+ } -+ } -+#endif -+ - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); - } -diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c 2008-02-01 14:51:35.000000000 -0500 -@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct - at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ - -+#ifdef CONFIG_FB_INTSRAM -+ { -+ void __iomem *fb; -+ struct resource *fb_res = &lcdc_resources[2]; -+ size_t fb_len = fb_res->end - fb_res->start + 1; -+ -+ fb = ioremap_writecombine(fb_res->start, fb_len); -+ if (fb) { -+ memset(fb, 0, fb_len); -+ iounmap(fb, fb_len); -+ } -+ } -+#endif -+ - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); - } -diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/Kconfig linux-avr32/arch/avr32/boards/atngw100/Kconfig ---- linux-2.6.24/arch/avr32/boards/atngw100/Kconfig 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atngw100/Kconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,12 @@ -+# NGW100 customization -+ -+config BOARD_ATNGW100_I2C_GPIO -+ bool "Use GPIO for i2c instead of built-in TWI module" -+ help -+ The driver for the built-in TWI module has been plagued by -+ various problems, while the i2c-gpio driver is based on the -+ trusty old i2c-algo-bit bitbanging engine, making it work -+ on pretty much any setup. -+ -+ Choose 'Y' here if you're having i2c-related problems and -+ want to rule out the i2c bus driver. -diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/setup.c linux-avr32/arch/avr32/boards/atngw100/setup.c ---- linux-2.6.24/arch/avr32/boards/atngw100/setup.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atngw100/setup.c 2008-02-01 14:51:35.000000000 -0500 -@@ -20,7 +20,7 @@ - #include <asm/io.h> - #include <asm/setup.h> - --#include <asm/arch/at32ap7000.h> -+#include <asm/arch/at32ap700x.h> - #include <asm/arch/board.h> - #include <asm/arch/init.h> - #include <asm/arch/portmux.h> -@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_ - }, - }; - -+static struct mci_platform_data __initdata mci0_data = { -+ .detect_pin = GPIO_PIN_PC(25), -+ .wp_pin = GPIO_PIN_PE(0), -+}; -+ - /* - * The next two functions should go away as the boot loader is - * supposed to initialize the macb address registers with a valid -@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_l - } - }; - -+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO - static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PIN_PA(6), - .scl_pin = GPIO_PIN_PA(7), -@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_d - .platform_data = &i2c_gpio_data, - }, - }; -+#endif - - static int __init atngw100_init(void) - { -@@ -157,6 +164,7 @@ static int __init atngw100_init(void) - set_hw_addr(at32_add_device_eth(1, ð_data[1])); - - at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); -+ at32_add_device_mci(0, &mci0_data); - at32_add_device_usba(0, NULL); - - for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { -@@ -165,11 +173,15 @@ static int __init atngw100_init(void) - } - platform_device_register(&ngw_gpio_leds); - -+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO - at32_select_gpio(i2c_gpio_data.sda_pin, - AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(i2c_gpio_data.scl_pin, - AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - platform_device_register(&i2c_gpio_device); -+#else -+ at32_add_device_twi(0); -+#endif - - return 0; - } -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h ---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h 2008-02-01 14:51:35.000000000 -0500 -@@ -12,4 +12,6 @@ - - extern struct atmel_lcdfb_info atstk1000_lcdc_data; - -+void atstk1000_setup_j2_leds(void); -+ - #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */ -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c ---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c 2008-02-01 14:51:35.000000000 -0500 -@@ -11,7 +11,6 @@ - #include <linux/etherdevice.h> - #include <linux/init.h> - #include <linux/kernel.h> --#include <linux/leds.h> - #include <linux/platform_device.h> - #include <linux/string.h> - #include <linux/types.h> -@@ -22,7 +21,7 @@ - - #include <asm/io.h> - #include <asm/setup.h> --#include <asm/arch/at32ap7000.h> -+#include <asm/arch/at32ap700x.h> - #include <asm/arch/board.h> - #include <asm/arch/init.h> - #include <asm/arch/portmux.h> -@@ -49,18 +48,16 @@ static struct eth_platform_data __initda - }, - }; - --#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM --#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC - static struct at73c213_board_info at73c213_data = { - .ssc_id = 0, - .shortname = "AVR32 STK1000 external DAC", - }; - #endif --#endif - --#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM -+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM - static struct spi_board_info spi0_board_info[] __initdata = { --#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC - { - /* AT73C213 */ - .modalias = "at73c213", -@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_ - }; - #endif - --#ifdef CONFIG_BOARD_ATSTK1002_SPI1 -+#ifdef CONFIG_BOARD_ATSTK100X_SPI1 - static struct spi_board_info spi1_board_info[] __initdata = { { - /* patch in custom entries here */ - } }; - #endif - -+static struct cf_platform_data __initdata cf0_data = { -+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS -+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN, -+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN, -+#else -+ .detect_pin = GPIO_PIN_NONE, -+ .reset_pin = GPIO_PIN_NONE, -+#endif -+ .vcc_pin = GPIO_PIN_NONE, -+ .ready_pin = GPIO_PIN_PB(27), -+ .cs = 4, -+}; -+ - /* - * The next two functions should go away as the boot loader is - * supposed to initialize the macb address registers with a valid -@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct pl - clk_put(pclk); - } - --#ifdef CONFIG_BOARD_ATSTK1002_J2_LED -- --static struct gpio_led stk_j2_led[] = { --#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8 --#define LEDSTRING "J2 jumpered to LED8" -- { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), }, -- { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), }, -- { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), }, -- { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), }, -- { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), }, -- { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), }, -- { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), }, -- { .name = "led7:amber", .gpio = GPIO_PIN_PB(30), -- .default_trigger = "heartbeat", }, --#else /* RGB */ --#define LEDSTRING "J2 jumpered to RGB LEDs" -- { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), }, -- { .name = "g1:green", .gpio = GPIO_PIN_PB(10), }, -- { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), }, -- -- { .name = "r2:red", .gpio = GPIO_PIN_PB( 9), -- .default_trigger = "heartbeat", }, -- { .name = "g2:green", .gpio = GPIO_PIN_PB(13), }, -- { .name = "b2:blue", .gpio = GPIO_PIN_PB(15), -- .default_trigger = "heartbeat", }, -- /* PB16, PB30 unused */ --#endif --}; -- --static struct gpio_led_platform_data stk_j2_led_data = { -- .num_leds = ARRAY_SIZE(stk_j2_led), -- .leds = stk_j2_led, --}; -- --static struct platform_device stk_j2_led_dev = { -- .name = "leds-gpio", -- .id = 2, /* gpio block J2 */ -- .dev = { -- .platform_data = &stk_j2_led_data, -- }, --}; -- --static void setup_j2_leds(void) --{ -- unsigned i; -- -- for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++) -- at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT); -- -- printk("STK1002: " LEDSTRING "\n"); -- platform_device_register(&stk_j2_led_dev); --} -- --#else --static void setup_j2_leds(void) --{ --} --#endif -- --#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM --#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM --static void __init at73c213_set_clk(struct at73c213_board_info *info) -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+static void __init atstk1002_setup_extdac(void) - { - struct clk *gclk; - struct clk *pll; -@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(stru - } - - at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); -- info->dac_clk = gclk; -+ at73c213_data.dac_clk = gclk; - - err_set_clk: - clk_put(pll); -@@ -229,12 +179,16 @@ err_pll: - err_gclk: - return; - } --#endif --#endif -+#else -+static void __init atstk1002_setup_extdac(void) -+{ -+ -+} -+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */ - - void __init setup_board(void) - { --#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM -+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ - #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -@@ -271,7 +225,7 @@ static int __init atstk1002_init(void) - - at32_add_system_devices(); - --#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM -+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_usart(1); - #else - at32_add_device_usart(0); -@@ -281,12 +235,16 @@ static int __init atstk1002_init(void) - #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM - set_hw_addr(at32_add_device_eth(0, ð_data[0])); - #endif --#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM -+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM - at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); - #endif --#ifdef CONFIG_BOARD_ATSTK1002_SPI1 -+#ifdef CONFIG_BOARD_ATSTK100X_SPI1 - at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); - #endif -+ at32_add_device_twi(0); -+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_add_device_mci(0, NULL); -+#endif - #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM - set_hw_addr(at32_add_device_eth(1, ð_data[1])); - #else -@@ -294,17 +252,18 @@ static int __init atstk1002_init(void) - fbmem_start, fbmem_size); - #endif - at32_add_device_usba(0, NULL); --#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM -+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97 -+ at32_add_device_ac97c(0); -+#else -+ at32_add_device_abdac(0); -+#endif -+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM - at32_add_device_ssc(0, ATMEL_SSC_TX); - #endif -+ at32_add_device_cf(0, 2, &cf0_data); - -- setup_j2_leds(); -- --#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM --#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM -- at73c213_set_clk(&at73c213_data); --#endif --#endif -+ atstk1000_setup_j2_leds(); -+ atstk1002_setup_extdac(); - - return 0; - } -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c ---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,181 @@ -+/* -+ * ATSTK1003 daughterboard-specific init code -+ * -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/string.h> -+#include <linux/types.h> -+ -+#include <linux/spi/at73c213.h> -+#include <linux/spi/spi.h> -+ -+#include <asm/setup.h> -+ -+#include <asm/arch/at32ap700x.h> -+#include <asm/arch/board.h> -+#include <asm/arch/init.h> -+#include <asm/arch/portmux.h> -+ -+#include "atstk1000.h" -+ -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+static struct at73c213_board_info at73c213_data = { -+ .ssc_id = 0, -+ .shortname = "AVR32 STK1000 external DAC", -+}; -+#endif -+ -+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM -+static struct spi_board_info spi0_board_info[] __initdata = { -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+ { -+ /* AT73C213 */ -+ .modalias = "at73c213", -+ .max_speed_hz = 200000, -+ .chip_select = 0, -+ .mode = SPI_MODE_1, -+ .platform_data = &at73c213_data, -+ }, -+#endif -+ /* -+ * We can control the LTV350QV LCD panel, but it isn't much -+ * point since we don't have an LCD controller... -+ */ -+}; -+#endif -+ -+#ifdef CONFIG_BOARD_ATSTK100X_SPI1 -+static struct spi_board_info spi1_board_info[] __initdata = { { -+ /* patch in custom entries here */ -+} }; -+#endif -+ -+static struct cf_platform_data __initdata cf0_data = { -+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS -+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN, -+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN, -+#else -+ .detect_pin = GPIO_PIN_NONE, -+ .reset_pin = GPIO_PIN_NONE, -+#endif -+ .vcc_pin = GPIO_PIN_NONE, -+ .ready_pin = GPIO_PIN_PB(27), -+ .cs = 4, -+}; -+ -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+static void __init atstk1003_setup_extdac(void) -+{ -+ struct clk *gclk; -+ struct clk *pll; -+ -+ gclk = clk_get(NULL, "gclk0"); -+ if (IS_ERR(gclk)) -+ goto err_gclk; -+ pll = clk_get(NULL, "pll0"); -+ if (IS_ERR(pll)) -+ goto err_pll; -+ -+ if (clk_set_parent(gclk, pll)) { -+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n"); -+ goto err_set_clk; -+ } -+ -+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); -+ at73c213_data.dac_clk = gclk; -+ -+err_set_clk: -+ clk_put(pll); -+err_pll: -+ clk_put(gclk); -+err_gclk: -+ return; -+} -+#else -+static void __init atstk1003_setup_extdac(void) -+{ -+ -+} -+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */ -+ -+void __init setup_board(void) -+{ -+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ -+#else -+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -+#endif -+ /* USART 2/unused: expansion connector */ -+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ -+ -+ at32_setup_serial_console(0); -+} -+ -+static int __init atstk1003_init(void) -+{ -+ /* -+ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the -+ * SDRAM-specific pins so that nobody messes with them. -+ */ -+ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ -+ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ -+ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ -+ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ -+ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ -+ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ -+ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ -+ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ -+ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ -+ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ -+ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ -+ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ -+ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ -+ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ -+ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ -+ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ -+ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ -+ -+ at32_add_system_devices(); -+ -+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_add_device_usart(1); -+#else -+ at32_add_device_usart(0); -+#endif -+ at32_add_device_usart(2); -+ -+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM -+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); -+#endif -+#ifdef CONFIG_BOARD_ATSTK100X_SPI1 -+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); -+#endif -+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_add_device_mci(0, NULL); -+#endif -+ at32_add_device_usba(0, NULL); -+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97 -+ at32_add_device_ac97c(0); -+#else -+ at32_add_device_abdac(0); -+#endif -+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM -+ at32_add_device_ssc(0, ATMEL_SSC_TX); -+#endif -+ at32_add_device_cf(0, 2, &cf0_data); -+ -+ atstk1000_setup_j2_leds(); -+ atstk1003_setup_extdac(); -+ -+ return 0; -+} -+postcore_initcall(atstk1003_init); -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c ---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,152 @@ -+/* -+ * ATSTK1003 daughterboard-specific init code -+ * -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/string.h> -+#include <linux/types.h> -+ -+#include <linux/spi/at73c213.h> -+#include <linux/spi/spi.h> -+ -+#include <video/atmel_lcdc.h> -+ -+#include <asm/setup.h> -+ -+#include <asm/arch/at32ap700x.h> -+#include <asm/arch/board.h> -+#include <asm/arch/init.h> -+#include <asm/arch/portmux.h> -+ -+#include "atstk1000.h" -+ -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+static struct at73c213_board_info at73c213_data = { -+ .ssc_id = 0, -+ .shortname = "AVR32 STK1000 external DAC", -+}; -+#endif -+ -+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM -+static struct spi_board_info spi0_board_info[] __initdata = { -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+ { -+ /* AT73C213 */ -+ .modalias = "at73c213", -+ .max_speed_hz = 200000, -+ .chip_select = 0, -+ .mode = SPI_MODE_1, -+ .platform_data = &at73c213_data, -+ }, -+#endif -+ { -+ /* QVGA display */ -+ .modalias = "ltv350qv", -+ .max_speed_hz = 16000000, -+ .chip_select = 1, -+ .mode = SPI_MODE_3, -+ }, -+}; -+#endif -+ -+#ifdef CONFIG_BOARD_ATSTK100X_SPI1 -+static struct spi_board_info spi1_board_info[] __initdata = { { -+ /* patch in custom entries here */ -+} }; -+#endif -+ -+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -+static void __init atstk1004_setup_extdac(void) -+{ -+ struct clk *gclk; -+ struct clk *pll; -+ -+ gclk = clk_get(NULL, "gclk0"); -+ if (IS_ERR(gclk)) -+ goto err_gclk; -+ pll = clk_get(NULL, "pll0"); -+ if (IS_ERR(pll)) -+ goto err_pll; -+ -+ if (clk_set_parent(gclk, pll)) { -+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n"); -+ goto err_set_clk; -+ } -+ -+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); -+ at73c213_data.dac_clk = gclk; -+ -+err_set_clk: -+ clk_put(pll); -+err_pll: -+ clk_put(gclk); -+err_gclk: -+ return; -+} -+#else -+static void __init atstk1004_setup_extdac(void) -+{ -+ -+} -+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */ -+ -+void __init setup_board(void) -+{ -+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ -+#else -+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -+#endif -+ /* USART 2/unused: expansion connector */ -+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ -+ -+ at32_setup_serial_console(0); -+} -+ -+static int __init atstk1004_init(void) -+{ -+ at32_add_system_devices(); -+ -+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_add_device_usart(1); -+#else -+ at32_add_device_usart(0); -+#endif -+ at32_add_device_usart(2); -+ -+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM -+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); -+#endif -+#ifdef CONFIG_BOARD_ATSTK100X_SPI1 -+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); -+#endif -+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+ at32_add_device_mci(0, NULL); -+#endif -+ at32_add_device_lcdc(0, &atstk1000_lcdc_data, -+ fbmem_start, fbmem_size); -+ at32_add_device_usba(0, NULL); -+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97 -+ at32_add_device_ac97c(0); -+#else -+ at32_add_device_abdac(0); -+#endif -+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM -+ at32_add_device_ssc(0, ATMEL_SSC_TX); -+#endif -+ -+ atstk1000_setup_j2_leds(); -+ atstk1004_setup_extdac(); -+ -+ return 0; -+} -+postcore_initcall(atstk1004_init); -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig linux-avr32/arch/avr32/boards/atstk1000/Kconfig ---- linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/Kconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -1,34 +1,53 @@ - # STK1000 customization - --if BOARD_ATSTK1002 -+if BOARD_ATSTK1000 - --config BOARD_ATSTK1002_CUSTOM -- bool "Non-default STK-1002 jumper settings" -+choice -+ prompt "ATSTK1000 CPU daughterboard type" -+ default BOARD_ATSTK1002 -+ -+config BOARD_ATSTK1002 -+ bool "ATSTK1002" -+ select CPU_AT32AP7000 -+ -+config BOARD_ATSTK1003 -+ bool "ATSTK1003" -+ select CPU_AT32AP7001 -+ -+config BOARD_ATSTK1004 -+ bool "ATSTK1004" -+ select CPU_AT32AP7002 -+ -+endchoice -+ -+ -+config BOARD_ATSTK100X_CUSTOM -+ bool "Non-default STK1002/STK1003/STK1004 jumper settings" - help - You will normally leave the jumpers on the CPU card at their - default settings. If you need to use certain peripherals, - you will need to change some of those jumpers. - --if BOARD_ATSTK1002_CUSTOM -+if BOARD_ATSTK100X_CUSTOM - --config BOARD_ATSTK1002_SW1_CUSTOM -+config BOARD_ATSTK100X_SW1_CUSTOM - bool "SW1: use SSC1 (not SPI0)" - help - This also prevents using the external DAC as an audio interface, - and means you can't initialize the on-board QVGA display. - --config BOARD_ATSTK1002_SW2_CUSTOM -+config BOARD_ATSTK100X_SW2_CUSTOM - bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)" - help - If you change this you'll want an updated boot loader putting - the console on UART-C not UART-A. - --config BOARD_ATSTK1002_SW3_CUSTOM -+config BOARD_ATSTK100X_SW3_CUSTOM - bool "SW3: use TIMER1 (not SSC0 and GCLK)" - help - This also prevents using the external DAC as an audio interface. - --config BOARD_ATSTK1002_SW4_CUSTOM -+config BOARD_ATSTK100X_SW4_CUSTOM - bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)" - help - To use the camera interface you'll need a custom card (on the -@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM - - config BOARD_ATSTK1002_SW5_CUSTOM - bool "SW5: use MACB1 (not LCDC)" -+ depends on BOARD_ATSTK1002 - - config BOARD_ATSTK1002_SW6_CUSTOM - bool "SW6: more GPIOs (not MACB0)" -+ depends on BOARD_ATSTK1002 - - endif # custom - --config BOARD_ATSTK1002_SPI1 -+config BOARD_ATSTK100X_SPI1 - bool "Configure SPI1 controller" -- depends on !BOARD_ATSTK1002_SW4_CUSTOM -+ depends on !BOARD_ATSTK100X_SW4_CUSTOM - help - All the signals for the second SPI controller are available on - GPIO lines and accessed through the J1 jumper block. Say "y" - here to configure that SPI controller. - --config BOARD_ATSTK1002_J2_LED -+config BOARD_ATSTK1000_J2_LED - bool -- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB -+ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB - - choice - prompt "LEDs connected to J2:" -- depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM -+ depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM - optional - help - Select this if you have jumpered the J2 jumper block to the -@@ -64,16 +85,64 @@ choice - IDC cable. A default "heartbeat" trigger is provided, but - you can of course override this. - --config BOARD_ATSTK1002_J2_LED8 -+config BOARD_ATSTK1000_J2_LED8 - bool "LED0..LED7" - help - Select this if J2 is jumpered to LED0..LED7 amber leds. - --config BOARD_ATSTK1002_J2_RGB -+config BOARD_ATSTK1000_J2_RGB - bool "RGB leds" - help - Select this if J2 is jumpered to the RGB leds. - - endchoice - --endif # stk 1002 -+config BOARD_ATSTK1000_EXTDAC -+ bool -+ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM -+ default y -+ -+config BOARD_ATSTK100X_ENABLE_AC97 -+ bool "Use AC97C instead of ABDAC" -+ help -+ Select this if you want to use the built-in AC97 controller -+ instead of the built-in Audio Bitstream DAC. These share -+ the same I/O pins on the AP7000, so both can't be enabled -+ at the same time. -+ -+ Note that the STK1000 kit doesn't ship with an AC97 codec on -+ board, so say N unless you've got an expansion board with an -+ AC97 codec on it that you want to use. -+ -+config BOARD_ATSTK1000_CF_HACKS -+ bool "ATSTK1000 CompactFlash hacks" -+ depends on !BOARD_ATSTK100X_SW4_CUSTOM -+ help -+ Select this if you have re-routed the CompactFlash RESET and -+ CD signals to GPIOs on your STK1000. This is necessary for -+ reset and card detection to work properly, although some CF -+ cards may be able to cope without reset. -+ -+config BOARD_ATSTK1000_CF_RESET_PIN -+ hex "CompactFlash RESET pin" -+ default 0x30 -+ depends on BOARD_ATSTK1000_CF_HACKS -+ help -+ Select which GPIO pin to use for the CompactFlash RESET -+ signal. This is specified as a hexadecimal number and should -+ be defined as 0x20 * gpio_port + pin. -+ -+ The default is 0x30, which is pin 16 on PIOB, aka GPIO14. -+ -+config BOARD_ATSTK1000_CF_DETECT_PIN -+ hex "CompactFlash DETECT pin" -+ default 0x3e -+ depends on BOARD_ATSTK1000_CF_HACKS -+ help -+ Select which GPIO pin to use for the CompactFlash CD -+ signal. This is specified as a hexadecimal number and should -+ be defined as 0x20 * gpio_port + pin. -+ -+ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15. -+ -+endif # stk 1000 -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Makefile linux-avr32/arch/avr32/boards/atstk1000/Makefile ---- linux-2.6.24/arch/avr32/boards/atstk1000/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/Makefile 2008-02-01 14:51:35.000000000 -0500 -@@ -1,2 +1,4 @@ - obj-y += setup.o flash.o - obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o -+obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o -+obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o -diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/setup.c linux-avr32/arch/avr32/boards/atstk1000/setup.c ---- linux-2.6.24/arch/avr32/boards/atstk1000/setup.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/boards/atstk1000/setup.c 2008-02-01 14:51:35.000000000 -0500 -@@ -10,13 +10,17 @@ - #include <linux/bootmem.h> - #include <linux/fb.h> - #include <linux/init.h> -+#include <linux/platform_device.h> - #include <linux/types.h> - #include <linux/linkage.h> - - #include <video/atmel_lcdc.h> - - #include <asm/setup.h> -+ -+#include <asm/arch/at32ap700x.h> - #include <asm/arch/board.h> -+#include <asm/arch/portmux.h> - - #include "atstk1000.h" - -@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk - .default_monspecs = &atstk1000_default_monspecs, - .guard_time = 2, - }; -+ -+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED -+#include <linux/leds.h> -+ -+static struct gpio_led stk1000_j2_led[] = { -+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8 -+#define LEDSTRING "J2 jumpered to LED8" -+ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), }, -+ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), }, -+ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), }, -+ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), }, -+ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), }, -+ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), }, -+ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), }, -+ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30), -+ .default_trigger = "heartbeat", }, -+#else /* RGB */ -+#define LEDSTRING "J2 jumpered to RGB LEDs" -+ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), }, -+ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), }, -+ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), }, -+ -+ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9), -+ .default_trigger = "heartbeat", }, -+ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), }, -+ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15), -+ .default_trigger = "heartbeat", }, -+ /* PB16, PB30 unused */ -+#endif -+}; -+ -+static struct gpio_led_platform_data stk1000_j2_led_data = { -+ .num_leds = ARRAY_SIZE(stk1000_j2_led), -+ .leds = stk1000_j2_led, -+}; -+ -+static struct platform_device stk1000_j2_led_dev = { -+ .name = "leds-gpio", -+ .id = 2, /* gpio block J2 */ -+ .dev = { -+ .platform_data = &stk1000_j2_led_data, -+ }, -+}; -+ -+void __init atstk1000_setup_j2_leds(void) -+{ -+ unsigned i; -+ -+ for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++) -+ at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT); -+ -+ printk("STK1000: " LEDSTRING "\n"); -+ platform_device_register(&stk1000_j2_led_dev); -+} -+#else /* CONFIG_BOARD_ATSTK1000_J2_LED */ -+void __init atstk1000_setup_j2_leds(void) -+{ -+ -+} -+#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */ -diff -Nrup linux-2.6.24/arch/avr32/configs/atngw100_defconfig linux-avr32/arch/avr32/configs/atngw100_defconfig ---- linux-2.6.24/arch/avr32/configs/atngw100_defconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/configs/atngw100_defconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -1,46 +1,51 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.22-rc5 --# Sat Jun 23 15:40:05 2007 -+# Linux kernel version: 2.6.24-rc7 -+# Wed Jan 9 23:20:41 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y - CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y - CONFIG_HARDIRQS_SW_RESEND=y - CONFIG_GENERIC_IRQ_PROBE=y - CONFIG_RWSEM_GENERIC_SPINLOCK=y - CONFIG_GENERIC_TIME=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set - # CONFIG_ARCH_HAS_ILOG2_U32 is not set - # CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_ARCH_SUPPORTS_OPROFILE=y - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y - CONFIG_GENERIC_BUG=y - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_SWAP=y - CONFIG_SYSVIPC=y --# CONFIG_IPC_NS is not set - CONFIG_SYSVIPC_SYSCTL=y - CONFIG_POSIX_MQUEUE=y - CONFIG_BSD_PROCESS_ACCT=y - CONFIG_BSD_PROCESS_ACCT_V3=y - # CONFIG_TASKSTATS is not set --# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set - # CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set - CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set - CONFIG_SYSFS_DEPRECATED=y - # CONFIG_RELAY is not set - CONFIG_BLK_DEV_INITRD=y -@@ -61,35 +66,28 @@ CONFIG_FUTEX=y - CONFIG_ANON_INODES=y - CONFIG_EPOLL=y - CONFIG_SIGNALFD=y --CONFIG_TIMERFD=y - CONFIG_EVENTFD=y - CONFIG_SHMEM=y - CONFIG_VM_EVENT_COUNTERS=y --# CONFIG_SLUB_DEBUG is not set -+CONFIG_SLUB_DEBUG=y - # CONFIG_SLAB is not set - CONFIG_SLUB=y - # CONFIG_SLOB is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=1 -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - CONFIG_MODULE_FORCE_UNLOAD=y - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - CONFIG_KMOD=y -- --# --# Block layer --# - CONFIG_BLOCK=y - # CONFIG_LBD is not set - # CONFIG_BLK_DEV_IO_TRACE is not set - # CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -111,6 +109,7 @@ CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y - CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7000=y - # CONFIG_BOARD_ATSTK1000 is not set - CONFIG_BOARD_ATNGW100=y -@@ -119,9 +118,9 @@ CONFIG_LOADER_U_BOOT=y - # - # Atmel AVR32 AP options - # --# CONFIG_AP7000_32_BIT_SMC is not set --CONFIG_AP7000_16_BIT_SMC=y --# CONFIG_AP7000_8_BIT_SMC is not set -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set - CONFIG_LOAD_ADDRESS=0x10000000 - CONFIG_ENTRY_ADDRESS=0x90000000 - CONFIG_PHYS_OFFSET=0x10000000 -@@ -141,9 +140,11 @@ CONFIG_FLATMEM_MANUAL=y - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4 - # CONFIG_RESOURCES_64BIT is not set - CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y - # CONFIG_OWNERSHIP_TRACE is not set - # CONFIG_HZ_100 is not set - CONFIG_HZ_250=y -@@ -153,13 +154,31 @@ CONFIG_HZ=250 - CONFIG_CMDLINE="" - - # --# Bus options -+# Power management options - # --# CONFIG_ARCH_SUPPORTS_MSI is not set - - # --# PCCARD (PCMCIA/CardBus) support -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options - # -+# CONFIG_ARCH_SUPPORTS_MSI is not set - # CONFIG_PCCARD is not set - - # -@@ -213,6 +232,7 @@ CONFIG_INET_TUNNEL=y - CONFIG_INET_XFRM_MODE_TRANSPORT=y - CONFIG_INET_XFRM_MODE_TUNNEL=y - CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set - CONFIG_INET_DIAG=y - CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set -@@ -240,6 +260,7 @@ CONFIG_IPV6_SIT=y - # CONFIG_NETWORK_SECMARK is not set - CONFIG_NETFILTER=y - # CONFIG_NETFILTER_DEBUG is not set -+CONFIG_BRIDGE_NETFILTER=y - - # - # Core Netfilter Configuration -@@ -252,6 +273,7 @@ CONFIG_NF_CONNTRACK_MARK=y - # CONFIG_NF_CONNTRACK_EVENTS is not set - CONFIG_NF_CT_PROTO_GRE=m - # CONFIG_NF_CT_PROTO_SCTP is not set -+# CONFIG_NF_CT_PROTO_UDPLITE is not set - CONFIG_NF_CONNTRACK_AMANDA=m - CONFIG_NF_CONNTRACK_FTP=m - CONFIG_NF_CONNTRACK_H323=m -@@ -269,9 +291,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m - CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m - CONFIG_NETFILTER_XT_TARGET_NFLOG=m - # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set - CONFIG_NETFILTER_XT_TARGET_TCPMSS=m - CONFIG_NETFILTER_XT_MATCH_COMMENT=m - CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set - CONFIG_NETFILTER_XT_MATCH_CONNMARK=m - CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m - # CONFIG_NETFILTER_XT_MATCH_DCCP is not set -@@ -284,6 +308,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m - CONFIG_NETFILTER_XT_MATCH_MARK=m - CONFIG_NETFILTER_XT_MATCH_POLICY=m - CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set - CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m - CONFIG_NETFILTER_XT_MATCH_QUOTA=m - CONFIG_NETFILTER_XT_MATCH_REALM=m -@@ -292,6 +317,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m - CONFIG_NETFILTER_XT_MATCH_STATISTIC=m - CONFIG_NETFILTER_XT_MATCH_STRING=m - CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set - CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - - # -@@ -359,13 +386,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m - CONFIG_IP6_NF_MANGLE=m - CONFIG_IP6_NF_TARGET_HL=m - CONFIG_IP6_NF_RAW=m -+ -+# -+# Bridge: Netfilter Configuration -+# -+# CONFIG_BRIDGE_NF_EBTABLES is not set - # CONFIG_IP_DCCP is not set - # CONFIG_IP_SCTP is not set - # CONFIG_TIPC is not set - # CONFIG_ATM is not set --# CONFIG_BRIDGE is not set -+CONFIG_BRIDGE=m - CONFIG_VLAN_8021Q=m - # CONFIG_DECNET is not set -+CONFIG_LLC=m - # CONFIG_LLC2 is not set - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -@@ -373,10 +406,6 @@ CONFIG_VLAN_8021Q=m - # CONFIG_LAPB is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - CONFIG_NET_CLS_ROUTE=y - -@@ -384,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y - # Network testing - # - # CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -@@ -397,6 +427,7 @@ CONFIG_NET_CLS_ROUTE=y - # CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set - # CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -405,16 +436,13 @@ CONFIG_NET_CLS_ROUTE=y - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - # CONFIG_PREVENT_FIRMWARE_BUILD is not set - # CONFIG_FW_LOADER is not set - # CONFIG_DEBUG_DRIVER is not set - # CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# - # CONFIG_CONNECTOR is not set - CONFIG_MTD=y - # CONFIG_MTD_DEBUG is not set -@@ -434,6 +462,7 @@ CONFIG_MTD_BLOCK=y - # CONFIG_INFTL is not set - # CONFIG_RFD_FTL is not set - # CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set - - # - # RAM/ROM/Flash chip drivers -@@ -493,20 +522,8 @@ CONFIG_MTD_DATAFLASH=y - # UBI - Unsorted block images - # - # CONFIG_MTD_UBI is not set -- --# --# Parallel port support --# - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# --# CONFIG_PNPACPI is not set -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=m - # CONFIG_BLK_DEV_CRYPTOLOOP is not set -@@ -517,11 +534,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 - CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -- --# --# Misc devices --# --# CONFIG_BLINK is not set -+# CONFIG_MISC_DEVICES is not set - # CONFIG_IDE is not set - - # -@@ -529,30 +542,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 - # - # CONFIG_RAID_ATTRS is not set - # CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set - # CONFIG_SCSI_NETLINK is not set - # CONFIG_ATA is not set -- --# --# Multi-device support (RAID and LVM) --# - # CONFIG_MD is not set -- --# --# Network device support --# - CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set - # CONFIG_DUMMY is not set - # CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set - CONFIG_TUN=m --# CONFIG_PHYLIB is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y - - # --# Ethernet (10 or 100Mbit) -+# MII PHY device drivers - # -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set - CONFIG_NET_ETHERNET=y --CONFIG_MII=y -+# CONFIG_MII is not set - CONFIG_MACB=y -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set - # CONFIG_NETDEV_1000 is not set - # CONFIG_NETDEV_10000 is not set - -@@ -571,21 +596,14 @@ CONFIG_PPP_DEFLATE=m - CONFIG_PPP_BSDCOMP=m - CONFIG_PPP_MPPE=m - CONFIG_PPPOE=m -+# CONFIG_PPPOL2TP is not set - # CONFIG_SLIP is not set - CONFIG_SLHC=m - # CONFIG_SHAPER is not set - # CONFIG_NETCONSOLE is not set - # CONFIG_NETPOLL is not set - # CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set -- --# --# Telephony Support --# - # CONFIG_PHONE is not set - - # -@@ -620,23 +638,50 @@ CONFIG_SERIAL_CORE=y - CONFIG_SERIAL_CORE_CONSOLE=y - CONFIG_UNIX98_PTYS=y - # CONFIG_LEGACY_PTYS is not set -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set --# CONFIG_WATCHDOG is not set - # CONFIG_HW_RANDOM is not set - # CONFIG_RTC is not set - # CONFIG_GEN_RTC is not set - # CONFIG_R3964 is not set - # CONFIG_RAW_DRIVER is not set -- --# --# TPM devices --# - # CONFIG_TCG_TPM is not set --# CONFIG_I2C is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=m -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set - - # - # SPI support -@@ -655,13 +700,25 @@ CONFIG_SPI_ATMEL=y - # SPI Protocol Masters - # - # CONFIG_SPI_AT25 is not set --# CONFIG_SPI_SPIDEV is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set - - # --# Dallas's 1-wire bus -+# Watchdog Device Drivers - # --# CONFIG_W1 is not set --# CONFIG_HWMON is not set -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # - # Multifunction device drivers -@@ -678,23 +735,21 @@ CONFIG_SPI_ATMEL=y - # - # Graphics support - # -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+# CONFIG_FB is not set - # CONFIG_BACKLIGHT_LCD_SUPPORT is not set - - # - # Display device support - # - # CONFIG_DISPLAY_SUPPORT is not set --# CONFIG_VGASTATE is not set --# CONFIG_FB is not set - - # - # Sound - # - # CONFIG_SOUND is not set -- --# --# USB support --# -+CONFIG_USB_SUPPORT=y - # CONFIG_USB_ARCH_HAS_HCD is not set - # CONFIG_USB_ARCH_HAS_OHCI is not set - # CONFIG_USB_ARCH_HAS_EHCI is not set -@@ -706,12 +761,47 @@ CONFIG_SPI_ATMEL=y - # - # USB Gadget Support - # --# CONFIG_USB_GADGET is not set --# CONFIG_MMC is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=m -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=m -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set - - # --# LED devices -+# MMC/SD Host Controller Drivers - # -+CONFIG_MMC_SPI=m - CONFIG_NEW_LEDS=y - CONFIG_LEDS_CLASS=y - -@@ -726,53 +816,71 @@ CONFIG_LEDS_GPIO=y - CONFIG_LEDS_TRIGGERS=y - CONFIG_LEDS_TRIGGER_TIMER=y - CONFIG_LEDS_TRIGGER_HEARTBEAT=y -- -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set - - # --# LED drivers --# -- --# --# LED Triggers --# -- --# --# InfiniBand support -+# RTC interfaces - # -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set - - # --# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -+# I2C RTC drivers - # -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set - - # --# Real Time Clock -+# SPI RTC drivers - # --# CONFIG_RTC_CLASS is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set - - # --# DMA Engine support -+# Platform RTC drivers - # --# CONFIG_DMA_ENGINE is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set - - # --# DMA Clients -+# on-CPU RTC drivers - # -+CONFIG_RTC_DRV_AT32AP700X=y - - # --# DMA Devices -+# Userspace I/O - # -+# CONFIG_UIO is not set - - # - # File systems - # --CONFIG_EXT2_FS=y -+CONFIG_EXT2_FS=m - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set --CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS=m - # CONFIG_EXT3_FS_XATTR is not set - # CONFIG_EXT4DEV_FS is not set --CONFIG_JBD=y --# CONFIG_JBD_DEBUG is not set -+CONFIG_JBD=m - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set - # CONFIG_FS_POSIX_ACL is not set -@@ -781,7 +889,8 @@ CONFIG_JBD=y - # CONFIG_OCFS2_FS is not set - # CONFIG_MINIX_FS is not set - # CONFIG_ROMFS_FS is not set --# CONFIG_INOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y - # CONFIG_QUOTA is not set - # CONFIG_DNOTIFY is not set - # CONFIG_AUTOFS_FS is not set -@@ -814,8 +923,7 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y --CONFIG_CONFIGFS_FS=y -+CONFIG_CONFIGFS_FS=m - - # - # Miscellaneous filesystems -@@ -830,10 +938,12 @@ CONFIG_CONFIGFS_FS=y - CONFIG_JFFS2_FS=y - CONFIG_JFFS2_FS_DEBUG=0 - CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set - # CONFIG_JFFS2_SUMMARY is not set - # CONFIG_JFFS2_FS_XATTR is not set - # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set - CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set - CONFIG_JFFS2_RTIME=y - # CONFIG_JFFS2_RUBIN is not set - # CONFIG_CRAMFS is not set -@@ -842,19 +952,21 @@ CONFIG_JFFS2_RTIME=y - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - CONFIG_NFS_FS=y - CONFIG_NFS_V3=y - # CONFIG_NFS_V3_ACL is not set - # CONFIG_NFS_V4 is not set - # CONFIG_NFS_DIRECTIO is not set --# CONFIG_NFSD is not set -+CONFIG_NFSD=m -+CONFIG_NFSD_V3=y -+# CONFIG_NFSD_V3_ACL is not set -+# CONFIG_NFSD_V4 is not set -+CONFIG_NFSD_TCP=y - CONFIG_ROOT_NFS=y - CONFIG_LOCKD=y - CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m - CONFIG_NFS_COMMON=y - CONFIG_SUNRPC=y - # CONFIG_SUNRPC_BIND34 is not set -@@ -871,23 +983,18 @@ CONFIG_CIFS=m - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set --# CONFIG_9P_FS is not set - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# --CONFIG_NLS=y -+CONFIG_NLS=m - CONFIG_NLS_DEFAULT="iso8859-1" --# CONFIG_NLS_CODEPAGE_437 is not set -+CONFIG_NLS_CODEPAGE_437=m - # CONFIG_NLS_CODEPAGE_737 is not set - # CONFIG_NLS_CODEPAGE_775 is not set --CONFIG_NLS_CODEPAGE_850=y -+CONFIG_NLS_CODEPAGE_850=m - # CONFIG_NLS_CODEPAGE_852 is not set - # CONFIG_NLS_CODEPAGE_855 is not set - # CONFIG_NLS_CODEPAGE_857 is not set -@@ -908,7 +1015,7 @@ CONFIG_NLS_CODEPAGE_850=y - # CONFIG_NLS_CODEPAGE_1250 is not set - # CONFIG_NLS_CODEPAGE_1251 is not set - # CONFIG_NLS_ASCII is not set --CONFIG_NLS_ISO8859_1=y -+CONFIG_NLS_ISO8859_1=m - # CONFIG_NLS_ISO8859_2 is not set - # CONFIG_NLS_ISO8859_3 is not set - # CONFIG_NLS_ISO8859_4 is not set -@@ -921,18 +1028,19 @@ CONFIG_NLS_ISO8859_1=y - # CONFIG_NLS_ISO8859_15 is not set - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set --CONFIG_NLS_UTF8=y -- --# --# Distributed Lock Manager --# -+CONFIG_NLS_UTF8=m - # CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # --CONFIG_TRACE_IRQFLAGS_SUPPORT=y - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y - CONFIG_ENABLE_MUST_CHECK=y - CONFIG_MAGIC_SYSRQ=y - # CONFIG_UNUSED_SYMBOLS is not set -@@ -941,12 +1049,17 @@ CONFIG_MAGIC_SYSRQ=y - CONFIG_DEBUG_KERNEL=y - # CONFIG_DEBUG_SHIRQ is not set - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set - # CONFIG_TIMER_STATS is not set -+# CONFIG_SLUB_DEBUG_ON is not set - # CONFIG_DEBUG_RT_MUTEXES is not set - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set - # CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set - # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set -@@ -954,21 +1067,21 @@ CONFIG_DEBUG_BUGVERBOSE=y - # CONFIG_DEBUG_INFO is not set - # CONFIG_DEBUG_VM is not set - # CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y - # CONFIG_FORCED_INLINING is not set -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_LKDTM is not set - # CONFIG_FAULT_INJECTION is not set --# CONFIG_KPROBES is not set -+# CONFIG_SAMPLES is not set - - # - # Security options - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set - CONFIG_CRYPTO=y - CONFIG_CRYPTO_ALGAPI=y - CONFIG_CRYPTO_BLKCIPHER=y -@@ -989,6 +1102,7 @@ CONFIG_CRYPTO_ECB=m - CONFIG_CRYPTO_CBC=y - CONFIG_CRYPTO_PCBC=m - # CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_XTS is not set - # CONFIG_CRYPTO_CRYPTD is not set - CONFIG_CRYPTO_DES=y - # CONFIG_CRYPTO_FCRYPT is not set -@@ -1002,15 +1116,14 @@ CONFIG_CRYPTO_DES=y - CONFIG_CRYPTO_ARC4=m - # CONFIG_CRYPTO_KHAZAD is not set - # CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_SEED is not set - CONFIG_CRYPTO_DEFLATE=y - # CONFIG_CRYPTO_MICHAEL_MIC is not set - # CONFIG_CRYPTO_CRC32C is not set - # CONFIG_CRYPTO_CAMELLIA is not set - # CONFIG_CRYPTO_TEST is not set -- --# --# Hardware crypto devices --# -+# CONFIG_CRYPTO_AUTHENC is not set -+CONFIG_CRYPTO_HW=y - - # - # Library routines -@@ -1018,8 +1131,9 @@ CONFIG_CRYPTO_DEFLATE=y - CONFIG_BITREVERSE=y - CONFIG_CRC_CCITT=m - # CONFIG_CRC16 is not set --# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC_ITU_T=m - CONFIG_CRC32=y -+CONFIG_CRC7=m - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y - CONFIG_ZLIB_DEFLATE=y -diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1002_defconfig linux-avr32/arch/avr32/configs/atstk1002_defconfig ---- linux-2.6.24/arch/avr32/configs/atstk1002_defconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/configs/atstk1002_defconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -1,48 +1,48 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.22-rc5 --# Sat Jun 23 15:32:08 2007 -+# Linux kernel version: 2.6.24-rc7 -+# Wed Jan 9 23:07:43 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y - CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y - CONFIG_HARDIRQS_SW_RESEND=y - CONFIG_GENERIC_IRQ_PROBE=y - CONFIG_RWSEM_GENERIC_SPINLOCK=y - CONFIG_GENERIC_TIME=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set - # CONFIG_ARCH_HAS_ILOG2_U32 is not set - # CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_ARCH_SUPPORTS_OPROFILE=y - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y - CONFIG_GENERIC_BUG=y - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_SWAP=y - CONFIG_SYSVIPC=y --# CONFIG_IPC_NS is not set - CONFIG_SYSVIPC_SYSCTL=y - CONFIG_POSIX_MQUEUE=y --CONFIG_BSD_PROCESS_ACCT=y --CONFIG_BSD_PROCESS_ACCT_V3=y --CONFIG_TASKSTATS=y --CONFIG_TASK_DELAY_ACCT=y --# CONFIG_TASK_XACCT is not set --# CONFIG_UTS_NS is not set --CONFIG_AUDIT=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set - CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_FAIR_GROUP_SCHED is not set - CONFIG_SYSFS_DEPRECATED=y - CONFIG_RELAY=y - CONFIG_BLK_DEV_INITRD=y -@@ -63,35 +63,28 @@ CONFIG_FUTEX=y - CONFIG_ANON_INODES=y - CONFIG_EPOLL=y - CONFIG_SIGNALFD=y --CONFIG_TIMERFD=y - CONFIG_EVENTFD=y - CONFIG_SHMEM=y - CONFIG_VM_EVENT_COUNTERS=y --# CONFIG_SLUB_DEBUG is not set -+CONFIG_SLUB_DEBUG=y - # CONFIG_SLAB is not set - CONFIG_SLUB=y - # CONFIG_SLOB is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=1 -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - # CONFIG_KMOD is not set -- --# --# Block layer --# - CONFIG_BLOCK=y - # CONFIG_LBD is not set - # CONFIG_BLK_DEV_IO_TRACE is not set - # CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -99,12 +92,12 @@ CONFIG_BLOCK=y - CONFIG_IOSCHED_NOOP=y - # CONFIG_IOSCHED_AS is not set - # CONFIG_IOSCHED_DEADLINE is not set --# CONFIG_IOSCHED_CFQ is not set -+CONFIG_IOSCHED_CFQ=y - # CONFIG_DEFAULT_AS is not set - # CONFIG_DEFAULT_DEADLINE is not set --# CONFIG_DEFAULT_CFQ is not set --CONFIG_DEFAULT_NOOP=y --CONFIG_DEFAULT_IOSCHED="noop" -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" - - # - # System Type and features -@@ -113,18 +106,27 @@ CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y - CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7000=y --CONFIG_BOARD_ATSTK1002=y - CONFIG_BOARD_ATSTK1000=y - # CONFIG_BOARD_ATNGW100 is not set -+CONFIG_BOARD_ATSTK1002=y -+# CONFIG_BOARD_ATSTK1003 is not set -+# CONFIG_BOARD_ATSTK1004 is not set -+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set -+# CONFIG_BOARD_ATSTK100X_SPI1 is not set -+# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set -+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set -+CONFIG_BOARD_ATSTK1000_EXTDAC=y - CONFIG_LOADER_U_BOOT=y - - # - # Atmel AVR32 AP options - # --# CONFIG_AP7000_32_BIT_SMC is not set --CONFIG_AP7000_16_BIT_SMC=y --# CONFIG_AP7000_8_BIT_SMC is not set -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set - CONFIG_LOAD_ADDRESS=0x10000000 - CONFIG_ENTRY_ADDRESS=0x90000000 - CONFIG_PHYS_OFFSET=0x10000000 -@@ -144,9 +146,11 @@ CONFIG_FLATMEM_MANUAL=y - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4 - # CONFIG_RESOURCES_64BIT is not set - CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y - # CONFIG_OWNERSHIP_TRACE is not set - # CONFIG_HZ_100 is not set - CONFIG_HZ_250=y -@@ -156,13 +160,31 @@ CONFIG_HZ=250 - CONFIG_CMDLINE="" - - # --# Bus options -+# Power management options - # --# CONFIG_ARCH_SUPPORTS_MSI is not set - - # --# PCCARD (PCMCIA/CardBus) support -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options - # -+# CONFIG_ARCH_SUPPORTS_MSI is not set - # CONFIG_PCCARD is not set - - # -@@ -182,7 +204,12 @@ CONFIG_NET=y - CONFIG_PACKET=y - CONFIG_PACKET_MMAP=y - CONFIG_UNIX=y --# CONFIG_NET_KEY is not set -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=m -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+CONFIG_NET_KEY=m -+# CONFIG_NET_KEY_MIGRATE is not set - CONFIG_INET=y - # CONFIG_IP_MULTICAST is not set - # CONFIG_IP_ADVANCED_ROUTER is not set -@@ -191,36 +218,52 @@ CONFIG_IP_PNP=y - CONFIG_IP_PNP_DHCP=y - # CONFIG_IP_PNP_BOOTP is not set - # CONFIG_IP_PNP_RARP is not set --# CONFIG_NET_IPIP is not set --# CONFIG_NET_IPGRE is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m - # CONFIG_ARPD is not set - # CONFIG_SYN_COOKIES is not set --# CONFIG_INET_AH is not set --# CONFIG_INET_ESP is not set -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m - # CONFIG_INET_IPCOMP is not set - # CONFIG_INET_XFRM_TUNNEL is not set --# CONFIG_INET_TUNNEL is not set --# CONFIG_INET_XFRM_MODE_TRANSPORT is not set --# CONFIG_INET_XFRM_MODE_TUNNEL is not set --# CONFIG_INET_XFRM_MODE_BEET is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set - CONFIG_INET_DIAG=y - CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set - CONFIG_TCP_CONG_CUBIC=y - CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_TCP_MD5SIG is not set --# CONFIG_IPV6 is not set --# CONFIG_INET6_XFRM_TUNNEL is not set --# CONFIG_INET6_TUNNEL is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set - # CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set - # CONFIG_IP_DCCP is not set - # CONFIG_IP_SCTP is not set - # CONFIG_TIPC is not set - # CONFIG_ATM is not set --# CONFIG_BRIDGE is not set -+CONFIG_BRIDGE=m - # CONFIG_VLAN_8021Q is not set - # CONFIG_DECNET is not set -+CONFIG_LLC=m - # CONFIG_LLC2 is not set - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -@@ -228,16 +271,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_LAPB is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - - # - # Network testing - # - # CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -@@ -251,6 +291,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set - # CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -259,16 +300,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - # CONFIG_PREVENT_FIRMWARE_BUILD is not set - # CONFIG_FW_LOADER is not set - # CONFIG_DEBUG_DRIVER is not set - # CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# - # CONFIG_CONNECTOR is not set - CONFIG_MTD=y - # CONFIG_MTD_DEBUG is not set -@@ -288,6 +326,7 @@ CONFIG_MTD_BLOCK=y - # CONFIG_INFTL is not set - # CONFIG_RFD_FTL is not set - # CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set - - # - # RAM/ROM/Flash chip drivers -@@ -327,6 +366,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 - # - # Self-contained MTD device drivers - # -+CONFIG_MTD_DATAFLASH=m -+CONFIG_MTD_M25P80=m - # CONFIG_MTD_SLRAM is not set - # CONFIG_MTD_PHRAM is not set - # CONFIG_MTD_MTDRAM is not set -@@ -345,20 +386,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 - # UBI - Unsorted block images - # - # CONFIG_MTD_UBI is not set -- --# --# Parallel port support --# - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# --# CONFIG_PNPACPI is not set -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=m - # CONFIG_BLK_DEV_CRYPTOLOOP is not set -@@ -369,42 +398,87 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 - CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -- --# --# Misc devices --# --# CONFIG_BLINK is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=m - # CONFIG_IDE is not set - - # - # SCSI device support - # - # CONFIG_RAID_ATTRS is not set --# CONFIG_SCSI is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set - # CONFIG_SCSI_NETLINK is not set --# CONFIG_ATA is not set -+# CONFIG_SCSI_PROC_FS is not set - - # --# Multi-device support (RAID and LVM) -+# SCSI support type (disk, tape, CD-ROM) - # --# CONFIG_MD is not set -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m - - # --# Network device support -+# SCSI Transports - # -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+CONFIG_ATA=m -+# CONFIG_ATA_NONSTANDARD is not set -+CONFIG_PATA_AT32=m -+# CONFIG_PATA_PLATFORM is not set -+# CONFIG_MD is not set - CONFIG_NETDEVICES=y --CONFIG_DUMMY=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set - # CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set - CONFIG_TUN=m --# CONFIG_PHYLIB is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y - - # --# Ethernet (10 or 100Mbit) -+# MII PHY device drivers - # -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set - CONFIG_NET_ETHERNET=y --CONFIG_MII=y -+# CONFIG_MII is not set - CONFIG_MACB=y -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set - # CONFIG_NETDEV_1000 is not set - # CONFIG_NETDEV_10000 is not set - -@@ -423,27 +497,54 @@ CONFIG_PPP_DEFLATE=m - CONFIG_PPP_BSDCOMP=m - # CONFIG_PPP_MPPE is not set - # CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set - # CONFIG_SLIP is not set - CONFIG_SLHC=m - # CONFIG_SHAPER is not set - # CONFIG_NETCONSOLE is not set - # CONFIG_NETPOLL is not set - # CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set -- --# --# Telephony Support --# - # CONFIG_PHONE is not set - - # - # Input device support - # --# CONFIG_INPUT is not set -+CONFIG_INPUT=m -+# CONFIG_INPUT_FF_MEMLESS is not set -+CONFIG_INPUT_POLLDEV=m -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=m -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+CONFIG_MOUSE_GPIO=m -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set - - # - # Hardware I/O ports -@@ -472,35 +573,87 @@ CONFIG_SERIAL_CORE=y - CONFIG_SERIAL_CORE_CONSOLE=y - CONFIG_UNIX98_PTYS=y - # CONFIG_LEGACY_PTYS is not set -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set --# CONFIG_WATCHDOG is not set - # CONFIG_HW_RANDOM is not set - # CONFIG_RTC is not set - # CONFIG_GEN_RTC is not set - # CONFIG_R3964 is not set - # CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=m -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set - - # --# TPM devices -+# SPI support - # --# CONFIG_TCG_TPM is not set --# CONFIG_I2C is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y - - # --# SPI support -+# SPI Master Controller Drivers - # --# CONFIG_SPI is not set --# CONFIG_SPI_MASTER is not set -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set - - # --# Dallas's 1-wire bus -+# SPI Protocol Masters - # -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set - # CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set - # CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # - # Multifunction device drivers -@@ -517,23 +670,94 @@ CONFIG_UNIX98_PTYS=y - # - # Graphics support - # --# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set - - # - # Display device support - # - # CONFIG_DISPLAY_SUPPORT is not set --# CONFIG_VGASTATE is not set --# CONFIG_FB is not set -+# CONFIG_LOGO is not set - - # - # Sound - # --# CONFIG_SOUND is not set -+CONFIG_SOUND=m -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+# CONFIG_SND_SUPPORT_OLD_API is not set -+# CONFIG_SND_VERBOSE_PROCFS is not set -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# SPI devices -+# -+CONFIG_SND_AT73C213=m -+CONFIG_SND_AT73C213_TARGET_BITRATE=48000 -+ -+# -+# System on Chip audio support -+# -+# CONFIG_SND_SOC is not set -+ -+# -+# SoC Audio support for SuperH -+# - - # --# USB support -+# Open Sound System - # -+# CONFIG_SOUND_PRIME is not set -+# CONFIG_HID_SUPPORT is not set -+CONFIG_USB_SUPPORT=y - # CONFIG_USB_ARCH_HAS_HCD is not set - # CONFIG_USB_ARCH_HAS_OHCI is not set - # CONFIG_USB_ARCH_HAS_EHCI is not set -@@ -545,47 +769,116 @@ CONFIG_UNIX98_PTYS=y - # - # USB Gadget Support - # --# CONFIG_USB_GADGET is not set --# CONFIG_MMC is not set -- --# --# LED devices --# --# CONFIG_NEW_LEDS is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=m -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=m -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_SPI=m -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=m - - # - # LED drivers - # -+CONFIG_LEDS_GPIO=m - - # - # LED Triggers - # -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set - - # --# InfiniBand support -+# RTC interfaces - # -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set - - # --# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -+# I2C RTC drivers - # -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set - - # --# Real Time Clock -+# SPI RTC drivers - # --# CONFIG_RTC_CLASS is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set - - # --# DMA Engine support -+# Platform RTC drivers - # --# CONFIG_DMA_ENGINE is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set - - # --# DMA Clients -+# on-CPU RTC drivers - # -+CONFIG_RTC_DRV_AT32AP700X=y - - # --# DMA Devices -+# Userspace I/O - # -+# CONFIG_UIO is not set - - # - # File systems -@@ -593,8 +886,11 @@ CONFIG_UNIX98_PTYS=y - CONFIG_EXT2_FS=m - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set --# CONFIG_EXT3_FS is not set -+CONFIG_EXT3_FS=m -+# CONFIG_EXT3_FS_XATTR is not set - # CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=m -+# CONFIG_JBD_DEBUG is not set - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set - # CONFIG_FS_POSIX_ACL is not set -@@ -609,7 +905,7 @@ CONFIG_INOTIFY_USER=y - # CONFIG_DNOTIFY is not set - # CONFIG_AUTOFS_FS is not set - # CONFIG_AUTOFS4_FS is not set --# CONFIG_FUSE_FS is not set -+CONFIG_FUSE_FS=m - - # - # CD-ROM/DVD Filesystems -@@ -637,8 +933,7 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y --CONFIG_CONFIGFS_FS=m -+# CONFIG_CONFIGFS_FS is not set - - # - # Miscellaneous filesystems -@@ -652,11 +947,12 @@ CONFIG_CONFIGFS_FS=m - # CONFIG_EFS_FS is not set - CONFIG_JFFS2_FS=y - CONFIG_JFFS2_FS_DEBUG=0 --CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WRITEBUFFER is not set - # CONFIG_JFFS2_SUMMARY is not set - # CONFIG_JFFS2_FS_XATTR is not set - # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set - CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set - CONFIG_JFFS2_RTIME=y - # CONFIG_JFFS2_RUBIN is not set - # CONFIG_CRAMFS is not set -@@ -665,10 +961,7 @@ CONFIG_JFFS2_RTIME=y - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - CONFIG_NFS_FS=y - CONFIG_NFS_V3=y - # CONFIG_NFS_V3_ACL is not set -@@ -688,17 +981,12 @@ CONFIG_SUNRPC=y - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set --# CONFIG_9P_FS is not set - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# - CONFIG_NLS=m - CONFIG_NLS_DEFAULT="iso8859-1" - CONFIG_NLS_CODEPAGE_437=m -@@ -739,17 +1027,18 @@ CONFIG_NLS_ISO8859_1=m - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set - CONFIG_NLS_UTF8=m -- --# --# Distributed Lock Manager --# - # CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # --CONFIG_TRACE_IRQFLAGS_SUPPORT=y - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y - CONFIG_ENABLE_MUST_CHECK=y - CONFIG_MAGIC_SYSRQ=y - # CONFIG_UNUSED_SYMBOLS is not set -@@ -758,12 +1047,17 @@ CONFIG_DEBUG_FS=y - CONFIG_DEBUG_KERNEL=y - # CONFIG_DEBUG_SHIRQ is not set - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set - # CONFIG_TIMER_STATS is not set -+# CONFIG_SLUB_DEBUG_ON is not set - # CONFIG_DEBUG_RT_MUTEXES is not set - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set - # CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set - # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set -@@ -771,22 +1065,63 @@ CONFIG_DEBUG_BUGVERBOSE=y - # CONFIG_DEBUG_INFO is not set - # CONFIG_DEBUG_VM is not set - # CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y - CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_LKDTM is not set - # CONFIG_FAULT_INJECTION is not set --# CONFIG_KPROBES is not set -+# CONFIG_SAMPLES is not set - - # - # Security options - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# --# CONFIG_CRYPTO is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_HASH=m -+CONFIG_CRYPTO_MANAGER=m -+CONFIG_CRYPTO_HMAC=m -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=m -+CONFIG_CRYPTO_SHA1=m -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_ECB is not set -+CONFIG_CRYPTO_CBC=m -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=m -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_DEFLATE=m -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_TEST is not set -+# CONFIG_CRYPTO_AUTHENC is not set -+# CONFIG_CRYPTO_HW is not set - - # - # Library routines -@@ -794,10 +1129,10 @@ CONFIG_FORCED_INLINING=y - CONFIG_BITREVERSE=y - CONFIG_CRC_CCITT=m - # CONFIG_CRC16 is not set --# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC_ITU_T=m - CONFIG_CRC32=y -+CONFIG_CRC7=m - # CONFIG_LIBCRC32C is not set --CONFIG_AUDIT_GENERIC=y - CONFIG_ZLIB_INFLATE=y - CONFIG_ZLIB_DEFLATE=y - CONFIG_PLIST=y -diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1003_defconfig linux-avr32/arch/avr32/configs/atstk1003_defconfig ---- linux-2.6.24/arch/avr32/configs/atstk1003_defconfig 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/configs/atstk1003_defconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,1015 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24-rc7 -+# Wed Jan 9 22:54:34 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_ARCH_SUPPORTS_OPROFILE=y -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+CONFIG_TASKSTATS=y -+CONFIG_TASK_DELAY_ACCT=y -+# CONFIG_TASK_XACCT is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+CONFIG_AUDIT=y -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_RELAY=y -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_BASE_FULL is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+# CONFIG_SLUB_DEBUG is not set -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+# CONFIG_KMOD is not set -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+ -+# -+# System Type and features -+# -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y -+CONFIG_CPU_AT32AP7001=y -+CONFIG_BOARD_ATSTK1000=y -+# CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_ATSTK1002 is not set -+CONFIG_BOARD_ATSTK1003=y -+# CONFIG_BOARD_ATSTK1004 is not set -+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set -+# CONFIG_BOARD_ATSTK100X_SPI1 is not set -+# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set -+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set -+CONFIG_BOARD_ATSTK1000_EXTDAC=y -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_PNP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=m -+CONFIG_MTD_M25P80=m -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=m -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=m -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_SCSI_PROC_FS is not set -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+CONFIG_ATA=m -+# CONFIG_ATA_NONSTANDARD is not set -+CONFIG_PATA_AT32=m -+# CONFIG_PATA_PLATFORM is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+# CONFIG_NET_ETHERNET is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+# CONFIG_PPP_FILTER is not set -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+# CONFIG_PPP_MPPE is not set -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=m -+# CONFIG_INPUT_FF_MEMLESS is not set -+CONFIG_INPUT_POLLDEV=m -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=m -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+CONFIG_MOUSE_GPIO=m -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_RTC is not set -+# CONFIG_GEN_RTC is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=m -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+# CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=m -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# SPI devices -+# -+CONFIG_SND_AT73C213=m -+CONFIG_SND_AT73C213_TARGET_BITRATE=48000 -+ -+# -+# System on Chip audio support -+# -+# CONFIG_SND_SOC is not set -+ -+# -+# SoC Audio support for SuperH -+# -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+# CONFIG_HID_SUPPORT is not set -+CONFIG_USB_SUPPORT=y -+# CONFIG_USB_ARCH_HAS_HCD is not set -+# CONFIG_USB_ARCH_HAS_OHCI is not set -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_DEBUG_FS=y -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=m -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=m -+# CONFIG_MMC_BLOCK_BOUNCE is not set -+# CONFIG_SDIO_UART is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_SPI=m -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_GPIO=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y -+ -+# -+# Userspace I/O -+# -+CONFIG_UIO=m -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=m -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=m -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=m -+# CONFIG_JBD_DEBUG is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_DNOTIFY is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_KCORE=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+# CONFIG_NETWORK_FILESYSTEMS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+# CONFIG_MARKERS is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_LKDTM is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=m -+# CONFIG_CRC16 is not set -+CONFIG_CRC_ITU_T=m -+CONFIG_CRC32=y -+CONFIG_CRC7=m -+# CONFIG_LIBCRC32C is not set -+CONFIG_AUDIT_GENERIC=y -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1004_defconfig linux-avr32/arch/avr32/configs/atstk1004_defconfig ---- linux-2.6.24/arch/avr32/configs/atstk1004_defconfig 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/configs/atstk1004_defconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,621 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24-rc7 -+# Wed Jan 9 23:04:20 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_ARCH_SUPPORTS_OPROFILE=y -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+# CONFIG_SYSVIPC is not set -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_FAIR_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+# CONFIG_BLK_DEV_INITRD is not set -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_BASE_FULL is not set -+# CONFIG_FUTEX is not set -+# CONFIG_EPOLL is not set -+# CONFIG_SIGNALFD is not set -+# CONFIG_EVENTFD is not set -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+# CONFIG_SLAB is not set -+# CONFIG_SLUB is not set -+CONFIG_SLOB=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+# CONFIG_MODULES is not set -+# CONFIG_BLOCK is not set -+ -+# -+# System Type and features -+# -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y -+CONFIG_CPU_AT32AP7002=y -+CONFIG_BOARD_ATSTK1000=y -+# CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_ATSTK1002 is not set -+# CONFIG_BOARD_ATSTK1003 is not set -+CONFIG_BOARD_ATSTK1004=y -+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set -+# CONFIG_BOARD_ATSTK100X_SPI1 is not set -+# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+CONFIG_BOARD_ATSTK1000_EXTDAC=y -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_PNP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+# CONFIG_MISC_DEVICES is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_NETDEVICES is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+# CONFIG_INPUT is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_RTC is not set -+# CONFIG_GEN_RTC is not set -+# CONFIG_R3964 is not set -+# CONFIG_TCG_TPM is not set -+# CONFIG_I2C is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_LOGO is not set -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+CONFIG_USB_SUPPORT=y -+# CONFIG_USB_ARCH_HAS_HCD is not set -+# CONFIG_USB_ARCH_HAS_OHCI is not set -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+# CONFIG_USB_ETH_RNDIS is not set -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_MMC is not set -+# CONFIG_NEW_LEDS is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+# CONFIG_RTC_INTF_PROC is not set -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y -+ -+# -+# Userspace I/O -+# -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+# CONFIG_DNOTIFY is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_KCORE=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_NETWORK_FILESYSTEMS is not set -+# CONFIG_NLS is not set -+# CONFIG_DLM is not set -+# CONFIG_INSTRUMENTATION is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+# CONFIG_DEBUG_KERNEL is not set -+# CONFIG_DEBUG_BUGVERBOSE is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.c linux-avr32/arch/avr32/drivers/dw-dmac.c ---- linux-2.6.24/arch/avr32/drivers/dw-dmac.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/drivers/dw-dmac.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,761 @@ -+/* -+ * Driver for the Synopsys DesignWare DMA Controller -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/device.h> -+#include <linux/dma-mapping.h> -+#include <linux/dmapool.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+ -+#include <asm/dma-controller.h> -+#include <asm/io.h> -+ -+#include "dw-dmac.h" -+ -+#define DMAC_NR_CHANNELS 3 -+#define DMAC_MAX_BLOCKSIZE 4095 -+ -+enum { -+ CH_STATE_FREE = 0, -+ CH_STATE_ALLOCATED, -+ CH_STATE_BUSY, -+}; -+ -+struct dw_dma_lli { -+ dma_addr_t sar; -+ dma_addr_t dar; -+ dma_addr_t llp; -+ u32 ctllo; -+ u32 ctlhi; -+ u32 sstat; -+ u32 dstat; -+}; -+ -+struct dw_dma_block { -+ struct dw_dma_lli *lli_vaddr; -+ dma_addr_t lli_dma_addr; -+}; -+ -+struct dw_dma_channel { -+ unsigned int state; -+ int is_cyclic; -+ struct dma_request_sg *req_sg; -+ struct dma_request_cyclic *req_cyclic; -+ unsigned int nr_blocks; -+ int direction; -+ struct dw_dma_block *block; -+}; -+ -+struct dw_dma_controller { -+ spinlock_t lock; -+ void * __iomem regs; -+ struct dma_pool *lli_pool; -+ struct clk *hclk; -+ struct dma_controller dma; -+ struct dw_dma_channel channel[DMAC_NR_CHANNELS]; -+}; -+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma) -+ -+#define dmac_writel_hi(dmac, reg, value) \ -+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4) -+#define dmac_readl_hi(dmac, reg) \ -+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4) -+#define dmac_writel_lo(dmac, reg, value) \ -+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg) -+#define dmac_readl_lo(dmac, reg) \ -+ __raw_readl((dmac)->regs + DW_DMAC_##reg) -+#define dmac_chan_writel_hi(dmac, chan, reg, value) \ -+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \ -+ + DW_DMAC_CHAN_##reg + 4)) -+#define dmac_chan_readl_hi(dmac, chan, reg) \ -+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4) -+#define dmac_chan_writel_lo(dmac, chan, reg, value) \ -+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) -+#define dmac_chan_readl_lo(dmac, chan, reg) \ -+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) -+#define set_channel_bit(dmac, reg, chan) \ -+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8))) -+#define clear_channel_bit(dmac, reg, chan) \ -+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8))) -+ -+static int dmac_alloc_channel(struct dma_controller *_dmac) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ unsigned long flags; -+ int i; -+ -+ spin_lock_irqsave(&dmac->lock, flags); -+ for (i = 0; i < DMAC_NR_CHANNELS; i++) -+ if (dmac->channel[i].state == CH_STATE_FREE) -+ break; -+ -+ if (i < DMAC_NR_CHANNELS) { -+ chan = &dmac->channel[i]; -+ chan->state = CH_STATE_ALLOCATED; -+ } else { -+ i = -EBUSY; -+ } -+ -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ -+ return i; -+} -+ -+static void dmac_release_channel(struct dma_controller *_dmac, int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ -+ BUG_ON(channel >= DMAC_NR_CHANNELS -+ || dmac->channel[channel].state != CH_STATE_ALLOCATED); -+ -+ dmac->channel[channel].state = CH_STATE_FREE; -+} -+ -+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac, -+ unsigned int nr_blocks) -+{ -+ struct dw_dma_block *block; -+ void *p; -+ unsigned int i; -+ -+ block = kmalloc(nr_blocks * sizeof(*block), -+ GFP_KERNEL); -+ if (unlikely(!block)) -+ return NULL; -+ -+ for (i = 0; i < nr_blocks; i++) { -+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL, -+ &block[i].lli_dma_addr); -+ block[i].lli_vaddr = p; -+ if (unlikely(!p)) -+ goto fail; -+ } -+ -+ return block; -+ -+fail: -+ for (i = 0; i < nr_blocks; i++) { -+ if (!block[i].lli_vaddr) -+ break; -+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr, -+ block[i].lli_dma_addr); -+ } -+ kfree(block); -+ return NULL; -+} -+ -+static void cleanup_channel(struct dw_dma_controller *dmac, -+ struct dw_dma_channel *chan) -+{ -+ unsigned int i; -+ -+ if (chan->nr_blocks > 1) { -+ for (i = 0; i < chan->nr_blocks; i++) -+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr, -+ chan->block[i].lli_dma_addr); -+ kfree(chan->block); -+ } -+ -+ chan->state = CH_STATE_ALLOCATED; -+} -+ -+static int dmac_prepare_request_sg(struct dma_controller *_dmac, -+ struct dma_request_sg *req) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ unsigned long ctlhi, ctllo, cfghi, cfglo; -+ unsigned long block_size; -+ unsigned int nr_blocks; -+ int ret, i, direction; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dmac->lock, flags); -+ -+ ret = -EINVAL; -+ if (req->req.channel >= DMAC_NR_CHANNELS -+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED -+ || req->block_size > DMAC_MAX_BLOCKSIZE) { -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ return -EINVAL; -+ } -+ -+ chan = &dmac->channel[req->req.channel]; -+ chan->state = CH_STATE_BUSY; -+ chan->req_sg = req; -+ chan->is_cyclic = 0; -+ -+ /* -+ * We have marked the channel as busy, so no need to keep the -+ * lock as long as we only touch the channel-specific -+ * registers -+ */ -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ -+ /* -+ * There may be limitations in the driver and/or the DMA -+ * controller that prevents us from sending a whole -+ * scatterlist item in one go. Taking this into account, -+ * calculate the number of block transfers we need to set up. -+ * -+ * FIXME: Let the peripheral driver know about the maximum -+ * block size we support. We really don't want to use a -+ * different block size than what was suggested by the -+ * peripheral. -+ * -+ * Each block will get its own Linked List Item (LLI) below. -+ */ -+ block_size = req->block_size; -+ nr_blocks = req->nr_blocks; -+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n", -+ block_size, nr_blocks, req->nr_sg); -+ -+ BUG_ON(nr_blocks == 0); -+ chan->nr_blocks = nr_blocks; -+ -+ ret = -EINVAL; -+ cfglo = cfghi = 0; -+ switch (req->direction) { -+ case DMA_DIR_MEM_TO_PERIPH: -+ direction = DMA_TO_DEVICE; -+ cfghi = req->periph_id << (43 - 32); -+ break; -+ -+ case DMA_DIR_PERIPH_TO_MEM: -+ direction = DMA_FROM_DEVICE; -+ cfghi = req->periph_id << (39 - 32); -+ break; -+ default: -+ goto out_unclaim_channel; -+ } -+ -+ chan->direction = direction; -+ -+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); -+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); -+ -+ ctlhi = block_size >> req->width; -+ ctllo = ((req->direction << 20) -+ // | (1 << 14) | (1 << 11) // source/dest burst trans len -+ | (req->width << 4) | (req->width << 1) -+ | (1 << 0)); // interrupt enable -+ -+ if (nr_blocks == 1) { -+ /* Only one block: No need to use block chaining */ -+ if (direction == DMA_TO_DEVICE) { -+ dmac_chan_writel_lo(dmac, req->req.channel, SAR, -+ req->sg->dma_address); -+ dmac_chan_writel_lo(dmac, req->req.channel, DAR, -+ req->data_reg); -+ ctllo |= 2 << 7; // no dst increment -+ } else { -+ dmac_chan_writel_lo(dmac, req->req.channel, SAR, -+ req->data_reg); -+ dmac_chan_writel_lo(dmac, req->req.channel, DAR, -+ req->sg->dma_address); -+ ctllo |= 2 << 9; // no src increment -+ } -+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo); -+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi); -+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo); -+ } else { -+ struct dw_dma_lli *lli, *lli_prev = NULL; -+ int j = 0, offset = 0; -+ -+ ret = -ENOMEM; -+ chan->block = allocate_blocks(dmac, nr_blocks); -+ if (!chan->block) -+ goto out_unclaim_channel; -+ -+ if (direction == DMA_TO_DEVICE) -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; -+ else -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; -+ -+ /* -+ * Map scatterlist items to blocks. One scatterlist -+ * item may need more than one block for the reasons -+ * mentioned above. -+ */ -+ for (i = 0; i < nr_blocks; i++) { -+ lli = chan->block[i].lli_vaddr; -+ if (lli_prev) { -+ lli_prev->llp = chan->block[i].lli_dma_addr; -+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, -+ lli_prev->sar, lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi); -+ } -+ lli->llp = 0; -+ lli->ctllo = ctllo; -+ lli->ctlhi = ctlhi; -+ if (direction == DMA_TO_DEVICE) { -+ lli->sar = req->sg[j].dma_address + offset; -+ lli->dar = req->data_reg; -+ } else { -+ lli->sar = req->data_reg; -+ lli->dar = req->sg[j].dma_address + offset; -+ } -+ lli_prev = lli; -+ -+ offset += block_size; -+ if (offset > req->sg[j].length) { -+ j++; -+ offset = 0; -+ } -+ } -+ -+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, lli_prev->sar, -+ lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi); -+ -+ /* -+ * SAR, DAR and CTL are initialized from the LLI. We -+ * only have to enable the LLI bits in CTL. -+ */ -+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0); -+ dmac_chan_writel_lo(dmac, req->req.channel, LLP, -+ chan->block[0].lli_dma_addr); -+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); -+ } -+ -+ set_channel_bit(dmac, MASK_XFER, req->req.channel); -+ set_channel_bit(dmac, MASK_ERROR, req->req.channel); -+ if (req->req.block_complete) -+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); -+ else -+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); -+ -+ return 0; -+ -+out_unclaim_channel: -+ chan->state = CH_STATE_ALLOCATED; -+ return ret; -+} -+ -+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac, -+ struct dma_request_cyclic *req) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ unsigned long ctlhi, ctllo, cfghi, cfglo; -+ unsigned long block_size; -+ int ret, i, direction; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dmac->lock, flags); -+ -+ block_size = (req->buffer_size/req->periods) >> req->width; -+ -+ ret = -EINVAL; -+ if (req->req.channel >= DMAC_NR_CHANNELS -+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED -+ || (req->periods == 0) -+ || block_size > DMAC_MAX_BLOCKSIZE) { -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ return -EINVAL; -+ } -+ -+ chan = &dmac->channel[req->req.channel]; -+ chan->state = CH_STATE_BUSY; -+ chan->is_cyclic = 1; -+ chan->req_cyclic = req; -+ -+ /* -+ * We have marked the channel as busy, so no need to keep the -+ * lock as long as we only touch the channel-specific -+ * registers -+ */ -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ -+ /* -+ Setup -+ */ -+ BUG_ON(req->buffer_size % req->periods); -+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */ -+ -+ chan->nr_blocks = req->periods; -+ -+ ret = -EINVAL; -+ cfglo = cfghi = 0; -+ switch (req->direction) { -+ case DMA_DIR_MEM_TO_PERIPH: -+ direction = DMA_TO_DEVICE; -+ cfghi = req->periph_id << (43 - 32); -+ break; -+ -+ case DMA_DIR_PERIPH_TO_MEM: -+ direction = DMA_FROM_DEVICE; -+ cfghi = req->periph_id << (39 - 32); -+ break; -+ default: -+ goto out_unclaim_channel; -+ } -+ -+ chan->direction = direction; -+ -+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); -+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); -+ -+ ctlhi = block_size; -+ ctllo = ((req->direction << 20) -+ | (req->width << 4) | (req->width << 1) -+ | (1 << 0)); // interrupt enable -+ -+ { -+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL; -+ -+ ret = -ENOMEM; -+ chan->block = allocate_blocks(dmac, req->periods); -+ if (!chan->block) -+ goto out_unclaim_channel; -+ -+ if (direction == DMA_TO_DEVICE) -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; -+ else -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; -+ -+ /* -+ * Set up a linked list items where each period gets -+ * an item. The linked list item for the last period -+ * points back to the star of the buffer making a -+ * cyclic buffer. -+ */ -+ for (i = 0; i < req->periods; i++) { -+ lli = chan->block[i].lli_vaddr; -+ if (lli_prev) { -+ lli_prev->llp = chan->block[i].lli_dma_addr; -+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, -+ lli_prev->sar, lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi);*/ -+ } -+ lli->llp = 0; -+ lli->ctllo = ctllo; -+ lli->ctlhi = ctlhi; -+ if (direction == DMA_TO_DEVICE) { -+ lli->sar = req->buffer_start + i*(block_size << req->width); -+ lli->dar = req->data_reg; -+ } else { -+ lli->sar = req->data_reg; -+ lli->dar = req->buffer_start + i*(block_size << req->width); -+ } -+ lli_prev = lli; -+ } -+ lli->llp = chan->block[0].lli_dma_addr; -+ -+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, lli_prev->sar, -+ lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi); */ -+ -+ /* -+ * SAR, DAR and CTL are initialized from the LLI. We -+ * only have to enable the LLI bits in CTL. -+ */ -+ dmac_chan_writel_lo(dmac, req->req.channel, LLP, -+ chan->block[0].lli_dma_addr); -+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); -+ } -+ -+ clear_channel_bit(dmac, MASK_XFER, req->req.channel); -+ set_channel_bit(dmac, MASK_ERROR, req->req.channel); -+ if (req->req.block_complete) -+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); -+ else -+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); -+ -+ return 0; -+ -+out_unclaim_channel: -+ chan->state = CH_STATE_ALLOCATED; -+ return ret; -+} -+ -+static int dmac_start_request(struct dma_controller *_dmac, -+ unsigned int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ -+ BUG_ON(channel >= DMAC_NR_CHANNELS); -+ -+ set_channel_bit(dmac, CH_EN, channel); -+ -+ return 0; -+} -+ -+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac, -+ unsigned int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ dma_addr_t current_pos; -+ -+ BUG_ON(channel >= DMAC_NR_CHANNELS); -+ -+ chan = &dmac->channel[channel]; -+ -+ switch (chan->direction) { -+ case DMA_TO_DEVICE: -+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR); -+ break; -+ case DMA_FROM_DEVICE: -+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR); -+ break; -+ default: -+ return 0; -+ } -+ -+ -+ if (!current_pos) { -+ if (chan->is_cyclic) { -+ current_pos = chan->req_cyclic->buffer_start; -+ } else { -+ current_pos = chan->req_sg->sg->dma_address; -+ } -+ } -+ -+ return current_pos; -+} -+ -+ -+static int dmac_stop_request(struct dma_controller *_dmac, -+ unsigned int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ -+ BUG_ON(channel >= DMAC_NR_CHANNELS); -+ -+ chan = &dmac->channel[channel]; -+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n", -+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR), -+ dmac_chan_readl_lo(dmac, channel, DAR), -+ dmac_chan_readl_lo(dmac, channel, LLP), -+ dmac_chan_readl_hi(dmac, channel, CTL), -+ dmac_chan_readl_lo(dmac, channel, CTL)); -+ -+ if (chan->state == CH_STATE_BUSY) { -+ clear_channel_bit(dmac, CH_EN, channel); -+ cleanup_channel(dmac, &dmac->channel[channel]); -+ } -+ -+ return 0; -+} -+ -+ -+static void dmac_block_complete(struct dw_dma_controller *dmac) -+{ -+ struct dw_dma_channel *chan; -+ unsigned long status, chanid; -+ -+ status = dmac_readl_lo(dmac, STATUS_BLOCK); -+ -+ while (status) { -+ struct dma_request *req; -+ chanid = __ffs(status); -+ chan = &dmac->channel[chanid]; -+ -+ if (chan->is_cyclic) { -+ BUG_ON(!chan->req_cyclic -+ || !chan->req_cyclic->req.block_complete); -+ req = &chan->req_cyclic->req; -+ } else { -+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete); -+ req = &chan->req_sg->req; -+ } -+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid); -+ req->block_complete(req); -+ status = dmac_readl_lo(dmac, STATUS_BLOCK); -+ } -+} -+ -+static void dmac_xfer_complete(struct dw_dma_controller *dmac) -+{ -+ struct dw_dma_channel *chan; -+ struct dma_request *req; -+ unsigned long status, chanid; -+ -+ status = dmac_readl_lo(dmac, STATUS_XFER); -+ -+ while (status) { -+ chanid = __ffs(status); -+ chan = &dmac->channel[chanid]; -+ -+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid); -+ -+ req = &chan->req_sg->req; -+ BUG_ON(!req); -+ cleanup_channel(dmac, chan); -+ if (req->xfer_complete) -+ req->xfer_complete(req); -+ -+ status = dmac_readl_lo(dmac, STATUS_XFER); -+ } -+} -+ -+static void dmac_error(struct dw_dma_controller *dmac) -+{ -+ struct dw_dma_channel *chan; -+ unsigned long status, chanid; -+ -+ status = dmac_readl_lo(dmac, STATUS_ERROR); -+ -+ while (status) { -+ struct dma_request *req; -+ -+ chanid = __ffs(status); -+ chan = &dmac->channel[chanid]; -+ -+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid); -+ clear_channel_bit(dmac, CH_EN, chanid); -+ -+ if (chan->is_cyclic) { -+ BUG_ON(!chan->req_cyclic); -+ req = &chan->req_cyclic->req; -+ } else { -+ BUG_ON(!chan->req_sg); -+ req = &chan->req_sg->req; -+ } -+ -+ cleanup_channel(dmac, chan); -+ if (req->error) -+ req->error(req); -+ -+ status = dmac_readl_lo(dmac, STATUS_XFER); -+ } -+} -+ -+static irqreturn_t dmac_interrupt(int irq, void *dev_id) -+{ -+ struct dw_dma_controller *dmac = dev_id; -+ unsigned long status; -+ int ret = IRQ_NONE; -+ -+ spin_lock(&dmac->lock); -+ -+ status = dmac_readl_lo(dmac, STATUS_INT); -+ -+ while (status) { -+ ret = IRQ_HANDLED; -+ if (status & 0x10) -+ dmac_error(dmac); -+ if (status & 0x02) -+ dmac_block_complete(dmac); -+ if (status & 0x01) -+ dmac_xfer_complete(dmac); -+ -+ status = dmac_readl_lo(dmac, STATUS_INT); -+ } -+ -+ spin_unlock(&dmac->lock); -+ return ret; -+} -+ -+static int __devinit dmac_probe(struct platform_device *pdev) -+{ -+ struct dw_dma_controller *dmac; -+ struct resource *regs; -+ int ret; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) -+ return -ENXIO; -+ -+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL); -+ if (!dmac) -+ return -ENOMEM; -+ memset(dmac, 0, sizeof(*dmac)); -+ -+ dmac->hclk = clk_get(&pdev->dev, "hclk"); -+ if (IS_ERR(dmac->hclk)) { -+ ret = PTR_ERR(dmac->hclk); -+ goto out_free_dmac; -+ } -+ clk_enable(dmac->hclk); -+ -+ ret = -ENOMEM; -+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev, -+ sizeof(struct dw_dma_lli), 4, 0); -+ if (!dmac->lli_pool) -+ goto out_disable_clk; -+ -+ spin_lock_init(&dmac->lock); -+ dmac->dma.dev = &pdev->dev; -+ dmac->dma.alloc_channel = dmac_alloc_channel; -+ dmac->dma.release_channel = dmac_release_channel; -+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg; -+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic; -+ dmac->dma.start_request = dmac_start_request; -+ dmac->dma.stop_request = dmac_stop_request; -+ dmac->dma.get_current_pos = dmac_get_current_pos; -+ -+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!dmac->regs) -+ goto out_free_pool; -+ -+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt, -+ IRQF_SAMPLE_RANDOM, pdev->name, dmac); -+ if (ret) -+ goto out_unmap_regs; -+ -+ /* Enable the DMA controller */ -+ dmac_writel_lo(dmac, CFG, 1); -+ -+ register_dma_controller(&dmac->dma); -+ -+ printk(KERN_INFO -+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n", -+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0)); -+ -+ return 0; -+ -+out_unmap_regs: -+ iounmap(dmac->regs); -+out_free_pool: -+ dma_pool_destroy(dmac->lli_pool); -+out_disable_clk: -+ clk_disable(dmac->hclk); -+ clk_put(dmac->hclk); -+out_free_dmac: -+ kfree(dmac); -+ return ret; -+} -+ -+static struct platform_driver dmac_driver = { -+ .probe = dmac_probe, -+ .driver = { -+ .name = "dmaca", -+ }, -+}; -+ -+static int __init dmac_init(void) -+{ -+ return platform_driver_register(&dmac_driver); -+} -+subsys_initcall(dmac_init); -+ -+static void __exit dmac_exit(void) -+{ -+ platform_driver_unregister(&dmac_driver); -+} -+module_exit(dmac_exit); -+ -+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); -+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); -+MODULE_LICENSE("GPL"); -diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.h linux-avr32/arch/avr32/drivers/dw-dmac.h ---- linux-2.6.24/arch/avr32/drivers/dw-dmac.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/drivers/dw-dmac.h 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,42 @@ -+/* -+ * Driver for the Synopsys DesignWare DMA Controller -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __AVR32_DW_DMAC_H__ -+#define __AVR32_DW_DMAC_H__ -+ -+#define DW_DMAC_CFG 0x398 -+#define DW_DMAC_CH_EN 0x3a0 -+ -+#define DW_DMAC_STATUS_XFER 0x2e8 -+#define DW_DMAC_STATUS_BLOCK 0x2f0 -+#define DW_DMAC_STATUS_ERROR 0x308 -+ -+#define DW_DMAC_MASK_XFER 0x310 -+#define DW_DMAC_MASK_BLOCK 0x318 -+#define DW_DMAC_MASK_ERROR 0x330 -+ -+#define DW_DMAC_CLEAR_XFER 0x338 -+#define DW_DMAC_CLEAR_BLOCK 0x340 -+#define DW_DMAC_CLEAR_ERROR 0x358 -+ -+#define DW_DMAC_STATUS_INT 0x360 -+ -+#define DW_DMAC_CHAN_SAR 0x000 -+#define DW_DMAC_CHAN_DAR 0x008 -+#define DW_DMAC_CHAN_LLP 0x010 -+#define DW_DMAC_CHAN_CTL 0x018 -+#define DW_DMAC_CHAN_SSTAT 0x020 -+#define DW_DMAC_CHAN_DSTAT 0x028 -+#define DW_DMAC_CHAN_SSTATAR 0x030 -+#define DW_DMAC_CHAN_DSTATAR 0x038 -+#define DW_DMAC_CHAN_CFG 0x040 -+#define DW_DMAC_CHAN_SGR 0x048 -+#define DW_DMAC_CHAN_DSR 0x050 -+ -+#endif /* __AVR32_DW_DMAC_H__ */ -diff -Nrup linux-2.6.24/arch/avr32/drivers/Makefile linux-avr32/arch/avr32/drivers/Makefile ---- linux-2.6.24/arch/avr32/drivers/Makefile 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/drivers/Makefile 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1 @@ -+obj-$(CONFIG_DW_DMAC) += dw-dmac.o -diff -Nrup linux-2.6.24/arch/avr32/Kconfig linux-avr32/arch/avr32/Kconfig ---- linux-2.6.24/arch/avr32/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/Kconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32 - config ARCH_HAS_ILOG2_U64 - def_bool n - -+config ARCH_SUPPORTS_OPROFILE -+ def_bool y -+ - config GENERIC_HWEIGHT - def_bool y - -@@ -81,19 +84,23 @@ config PLATFORM_AT32AP - select MMU - select PERFORMANCE_COUNTERS - --choice -- prompt "AVR32 CPU type" -- default CPU_AT32AP7000 -+# -+# CPU types -+# - --config CPU_AT32AP7000 -- bool "AT32AP7000" -+# AP7000 derivatives -+config CPU_AT32AP700X -+ bool - select PLATFORM_AT32AP --endchoice -- --# --# CPU Daughterboards for ATSTK1000 --config BOARD_ATSTK1002 -+config CPU_AT32AP7000 -+ bool -+ select CPU_AT32AP700X -+config CPU_AT32AP7001 - bool -+ select CPU_AT32AP700X -+config CPU_AT32AP7002 -+ bool -+ select CPU_AT32AP700X - - choice - prompt "AVR32 board type" -@@ -101,15 +108,18 @@ choice - - config BOARD_ATSTK1000 - bool "ATSTK1000 evaluation board" -- select BOARD_ATSTK1002 if CPU_AT32AP7000 - - config BOARD_ATNGW100 - bool "ATNGW100 Network Gateway" -+ select CPU_AT32AP7000 - endchoice - - if BOARD_ATSTK1000 - source "arch/avr32/boards/atstk1000/Kconfig" - endif -+if BOARD_ATNGW100 -+source "arch/avr32/boards/atngw100/Kconfig" -+endif - - choice - prompt "Boot loader type" -@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig" - - config LOAD_ADDRESS - hex -- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y -+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y - - config ENTRY_ADDRESS - hex -- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y -+ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y - - config PHYS_OFFSET - hex -- default 0x10000000 if CPU_AT32AP7000=y -+ default 0x10000000 if CPU_AT32AP700X=y - - source "kernel/Kconfig.preempt" - -@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE - enabling Nexus-compliant debuggers to keep track of the PID of the - currently executing task. - -+config NMI_DEBUGGING -+ bool "NMI Debugging" -+ default n -+ help -+ Say Y here and pass the nmi_debug command-line parameter to -+ the kernel to turn on NMI debugging. Depending on the value -+ of the nmi_debug option, various pieces of information will -+ be dumped to the console when a Non-Maskable Interrupt -+ happens. -+ -+config DW_DMAC -+ tristate "Synopsys DesignWare DMA Controller support" -+ default y if CPU_AT32AP7000 -+ - # FPU emulation goes here - - source "kernel/Kconfig.hz" -@@ -219,6 +243,8 @@ source "drivers/Kconfig" - - source "fs/Kconfig" - -+source "kernel/Kconfig.instrumentation" -+ - source "arch/avr32/Kconfig.debug" - - source "security/Kconfig" -diff -Nrup linux-2.6.24/arch/avr32/Kconfig.debug linux-avr32/arch/avr32/Kconfig.debug ---- linux-2.6.24/arch/avr32/Kconfig.debug 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/Kconfig.debug 2008-02-01 14:51:35.000000000 -0500 -@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT - - source "lib/Kconfig.debug" - --config KPROBES -- bool "Kprobes" -- depends on DEBUG_KERNEL -- help -- Kprobes allows you to trap at almost any kernel address and -- execute a callback function. register_kprobe() establishes -- a probepoint and specifies the callback. Kprobes is useful -- for kernel debugging, non-intrusive instrumentation and testing. -- If in doubt, say "N". -- - endmenu -diff -Nrup linux-2.6.24/arch/avr32/kernel/cpu.c linux-avr32/arch/avr32/kernel/cpu.c ---- linux-2.6.24/arch/avr32/kernel/cpu.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/cpu.c 2008-02-01 14:51:35.000000000 -0500 -@@ -13,6 +13,7 @@ - #include <linux/percpu.h> - #include <linux/param.h> - #include <linux/errno.h> -+#include <linux/clk.h> - - #include <asm/setup.h> - #include <asm/sysreg.h> -@@ -187,9 +188,20 @@ static int __init topology_init(void) - - subsys_initcall(topology_init); - -+struct chip_id_map { -+ u16 mid; -+ u16 pn; -+ const char *name; -+}; -+ -+static const struct chip_id_map chip_names[] = { -+ { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" }, -+}; -+#define NR_CHIP_NAMES ARRAY_SIZE(chip_names) -+ - static const char *cpu_names[] = { - "Morgan", -- "AP7000", -+ "AP7", - }; - #define NR_CPU_NAMES ARRAY_SIZE(cpu_names) - -@@ -206,12 +218,32 @@ static const char *mmu_types[] = { - "MPU" - }; - -+static const char *cpu_feature_flags[] = { -+ "rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu", -+}; -+ -+static const char *get_chip_name(struct avr32_cpuinfo *cpu) -+{ -+ unsigned int i; -+ unsigned int mid = avr32_get_manufacturer_id(cpu); -+ unsigned int pn = avr32_get_product_number(cpu); -+ -+ for (i = 0; i < NR_CHIP_NAMES; i++) { -+ if (chip_names[i].mid == mid && chip_names[i].pn == pn) -+ return chip_names[i].name; -+ } -+ -+ return "(unknown)"; -+} -+ - void __init setup_processor(void) - { - unsigned long config0, config1; - unsigned long features; - unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type; -+ unsigned device_id; - unsigned tmp; -+ unsigned i; - - config0 = sysreg_read(CONFIG0); - config1 = sysreg_read(CONFIG1); -@@ -221,11 +253,14 @@ void __init setup_processor(void) - arch_rev = SYSREG_BFEXT(AR, config0); - mmu_type = SYSREG_BFEXT(MMUT, config0); - -+ device_id = ocd_read(DID); -+ - boot_cpu_data.arch_type = arch_id; - boot_cpu_data.cpu_type = cpu_id; - boot_cpu_data.arch_revision = arch_rev; - boot_cpu_data.cpu_revision = cpu_rev; - boot_cpu_data.tlb_config = mmu_type; -+ boot_cpu_data.device_id = device_id; - - tmp = SYSREG_BFEXT(ILSZ, config1); - if (tmp) { -@@ -247,41 +282,34 @@ void __init setup_processor(void) - return; - } - -- printk ("CPU: %s [%02x] revision %d (%s revision %d)\n", -+ printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data), -+ avr32_get_chip_revision(&boot_cpu_data) + 'A'); -+ printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n", - cpu_names[cpu_id], cpu_id, cpu_rev, - arch_names[arch_id], arch_rev); - printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]); - - printk ("CPU: features:"); - features = 0; -- if (config0 & SYSREG_BIT(CONFIG0_R)) { -+ if (config0 & SYSREG_BIT(CONFIG0_R)) - features |= AVR32_FEATURE_RMW; -- printk(" rmw"); -- } -- if (config0 & SYSREG_BIT(CONFIG0_D)) { -+ if (config0 & SYSREG_BIT(CONFIG0_D)) - features |= AVR32_FEATURE_DSP; -- printk(" dsp"); -- } -- if (config0 & SYSREG_BIT(CONFIG0_S)) { -+ if (config0 & SYSREG_BIT(CONFIG0_S)) - features |= AVR32_FEATURE_SIMD; -- printk(" simd"); -- } -- if (config0 & SYSREG_BIT(CONFIG0_O)) { -+ if (config0 & SYSREG_BIT(CONFIG0_O)) - features |= AVR32_FEATURE_OCD; -- printk(" ocd"); -- } -- if (config0 & SYSREG_BIT(CONFIG0_P)) { -+ if (config0 & SYSREG_BIT(CONFIG0_P)) - features |= AVR32_FEATURE_PCTR; -- printk(" perfctr"); -- } -- if (config0 & SYSREG_BIT(CONFIG0_J)) { -+ if (config0 & SYSREG_BIT(CONFIG0_J)) - features |= AVR32_FEATURE_JAVA; -- printk(" java"); -- } -- if (config0 & SYSREG_BIT(CONFIG0_F)) { -+ if (config0 & SYSREG_BIT(CONFIG0_F)) - features |= AVR32_FEATURE_FPU; -- printk(" fpu"); -- } -+ -+ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++) -+ if (features & (1 << i)) -+ printk(" %s", cpu_feature_flags[i]); -+ - printk("\n"); - boot_cpu_data.features = features; - } -@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, vo - { - unsigned int icache_size, dcache_size; - unsigned int cpu = smp_processor_id(); -+ unsigned int freq; -+ unsigned int i; - - icache_size = boot_cpu_data.icache.ways * - boot_cpu_data.icache.sets * -@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, vo - - seq_printf(m, "processor\t: %d\n", cpu); - -+ seq_printf(m, "chip type\t: %s revision %c\n", -+ get_chip_name(&boot_cpu_data), -+ avr32_get_chip_revision(&boot_cpu_data) + 'A'); - if (boot_cpu_data.arch_type < NR_ARCH_NAMES) -- seq_printf(m, "cpu family\t: %s revision %d\n", -+ seq_printf(m, "cpu arch\t: %s revision %d\n", - arch_names[boot_cpu_data.arch_type], - boot_cpu_data.arch_revision); - if (boot_cpu_data.cpu_type < NR_CPU_NAMES) -- seq_printf(m, "cpu type\t: %s revision %d\n", -+ seq_printf(m, "cpu core\t: %s revision %d\n", - cpu_names[boot_cpu_data.cpu_type], - boot_cpu_data.cpu_revision); - -+ freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000; -+ seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000); -+ - seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n", - icache_size >> 10, - boot_cpu_data.icache.ways, -@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, vo - boot_cpu_data.dcache.ways, - boot_cpu_data.dcache.sets, - boot_cpu_data.dcache.linesz); -- seq_printf(m, "bogomips\t: %lu.%02lu\n", -+ -+ seq_printf(m, "features\t:"); -+ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++) -+ if (boot_cpu_data.features & (1 << i)) -+ seq_printf(m, " %s", cpu_feature_flags[i]); -+ -+ seq_printf(m, "\nbogomips\t: %lu.%02lu\n", - boot_cpu_data.loops_per_jiffy / (500000/HZ), - (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100); - -@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, v - - } - --struct seq_operations cpuinfo_op = { -+const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, -diff -Nrup linux-2.6.24/arch/avr32/kernel/dma-controller.c linux-avr32/arch/avr32/kernel/dma-controller.c ---- linux-2.6.24/arch/avr32/kernel/dma-controller.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/dma-controller.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,34 @@ -+/* -+ * Preliminary DMA controller framework for AVR32 -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <asm/dma-controller.h> -+ -+static LIST_HEAD(controllers); -+ -+int register_dma_controller(struct dma_controller *dmac) -+{ -+ static int next_id; -+ -+ dmac->id = next_id++; -+ list_add_tail(&dmac->list, &controllers); -+ -+ return 0; -+} -+EXPORT_SYMBOL(register_dma_controller); -+ -+struct dma_controller *find_dma_controller(int id) -+{ -+ struct dma_controller *dmac; -+ -+ list_for_each_entry(dmac, &controllers, list) -+ if (dmac->id == id) -+ return dmac; -+ return NULL; -+} -+EXPORT_SYMBOL(find_dma_controller); -diff -Nrup linux-2.6.24/arch/avr32/kernel/irq.c linux-avr32/arch/avr32/kernel/irq.c ---- linux-2.6.24/arch/avr32/kernel/irq.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/irq.c 2008-02-01 14:51:35.000000000 -0500 -@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq) - printk("unexpected IRQ %u\n", irq); - } - -+/* May be overridden by platform code */ -+int __weak nmi_enable(void) -+{ -+ return -ENOSYS; -+} -+ -+void __weak nmi_disable(void) -+{ -+ -+} -+ - #ifdef CONFIG_PROC_FS - int show_interrupts(struct seq_file *p, void *v) - { -diff -Nrup linux-2.6.24/arch/avr32/kernel/kprobes.c linux-avr32/arch/avr32/kernel/kprobes.c ---- linux-2.6.24/arch/avr32/kernel/kprobes.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/kprobes.c 2008-02-01 14:51:35.000000000 -0500 -@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct - void __kprobes arch_arm_kprobe(struct kprobe *p) - { - pr_debug("arming kprobe at %p\n", p->addr); -+ ocd_enable(NULL); - *p->addr = BREAKPOINT_INSTRUCTION; - flush_icache_range((unsigned long)p->addr, - (unsigned long)p->addr + sizeof(kprobe_opcode_t)); -@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kp - void __kprobes arch_disarm_kprobe(struct kprobe *p) - { - pr_debug("disarming kprobe at %p\n", p->addr); -+ ocd_disable(NULL); - *p->addr = p->opcode; - flush_icache_range((unsigned long)p->addr, - (unsigned long)p->addr + sizeof(kprobe_opcode_t)); -@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(stru - - int __init arch_init_kprobes(void) - { -- printk("KPROBES: Enabling monitor mode (MM|DBE)...\n"); -- ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT)); -- - /* TODO: Register kretprobe trampoline */ - return 0; - } -diff -Nrup linux-2.6.24/arch/avr32/kernel/Makefile linux-avr32/arch/avr32/kernel/Makefile ---- linux-2.6.24/arch/avr32/kernel/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/Makefile 2008-02-01 14:51:35.000000000 -0500 -@@ -6,9 +6,11 @@ extra-y := head.o vmlinux.lds - - obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o - obj-y += syscall_table.o syscall-stubs.o irq.o --obj-y += setup.o traps.o semaphore.o ptrace.o -+obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o - obj-y += signal.o sys_avr32.o process.o time.o - obj-y += init_task.o switch_to.o cpu.o -+obj-y += dma-controller.o - obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o - obj-$(CONFIG_KPROBES) += kprobes.o - obj-$(CONFIG_STACKTRACE) += stacktrace.o -+obj-$(CONFIG_NMI_DEBUGGING) += nmi_debug.o -diff -Nrup linux-2.6.24/arch/avr32/kernel/nmi_debug.c linux-avr32/arch/avr32/kernel/nmi_debug.c ---- linux-2.6.24/arch/avr32/kernel/nmi_debug.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/nmi_debug.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,82 @@ -+/* -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/delay.h> -+#include <linux/kdebug.h> -+#include <linux/notifier.h> -+#include <linux/sched.h> -+ -+#include <asm/irq.h> -+ -+enum nmi_action { -+ NMI_SHOW_STATE = 1 << 0, -+ NMI_SHOW_REGS = 1 << 1, -+ NMI_DIE = 1 << 2, -+ NMI_DEBOUNCE = 1 << 3, -+}; -+ -+static unsigned long nmi_actions; -+ -+static int nmi_debug_notify(struct notifier_block *self, -+ unsigned long val, void *data) -+{ -+ struct die_args *args = data; -+ -+ if (likely(val != DIE_NMI)) -+ return NOTIFY_DONE; -+ -+ if (nmi_actions & NMI_SHOW_STATE) -+ show_state(); -+ if (nmi_actions & NMI_SHOW_REGS) -+ show_regs(args->regs); -+ if (nmi_actions & NMI_DEBOUNCE) -+ mdelay(10); -+ if (nmi_actions & NMI_DIE) -+ return NOTIFY_BAD; -+ -+ return NOTIFY_OK; -+} -+ -+static struct notifier_block nmi_debug_nb = { -+ .notifier_call = nmi_debug_notify, -+}; -+ -+static int __init nmi_debug_setup(char *str) -+{ -+ char *p, *sep; -+ -+ register_die_notifier(&nmi_debug_nb); -+ if (nmi_enable()) { -+ printk(KERN_WARNING "Unable to enable NMI.\n"); -+ return 0; -+ } -+ -+ if (*str != '=') -+ return 0; -+ -+ for (p = str + 1; *p; p = sep + 1) { -+ sep = strchr(p, ','); -+ if (sep) -+ *sep = 0; -+ if (strcmp(p, "state") == 0) -+ nmi_actions |= NMI_SHOW_STATE; -+ else if (strcmp(p, "regs") == 0) -+ nmi_actions |= NMI_SHOW_REGS; -+ else if (strcmp(p, "debounce") == 0) -+ nmi_actions |= NMI_DEBOUNCE; -+ else if (strcmp(p, "die") == 0) -+ nmi_actions |= NMI_DIE; -+ else -+ printk(KERN_WARNING "NMI: Unrecognized action `%s'\n", -+ p); -+ if (!sep) -+ break; -+ } -+ -+ return 0; -+} -+__setup("nmi_debug", nmi_debug_setup); -diff -Nrup linux-2.6.24/arch/avr32/kernel/ocd.c linux-avr32/arch/avr32/kernel/ocd.c ---- linux-2.6.24/arch/avr32/kernel/ocd.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/ocd.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,163 @@ -+/* -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/spinlock.h> -+ -+#include <asm/ocd.h> -+ -+static long ocd_count; -+static spinlock_t ocd_lock; -+ -+/** -+ * ocd_enable - enable on-chip debugging -+ * @child: task to be debugged -+ * -+ * If @child is non-NULL, ocd_enable() first checks if debugging has -+ * already been enabled for @child, and if it has, does nothing. -+ * -+ * If @child is NULL (e.g. when debugging the kernel), or debugging -+ * has not already been enabled for it, ocd_enable() increments the -+ * reference count and enables the debugging hardware. -+ */ -+void ocd_enable(struct task_struct *child) -+{ -+ u32 dc; -+ -+ if (child) -+ pr_debug("ocd_enable: child=%s [%u]\n", -+ child->comm, child->pid); -+ else -+ pr_debug("ocd_enable (no child)\n"); -+ -+ if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) { -+ spin_lock(&ocd_lock); -+ ocd_count++; -+ dc = ocd_read(DC); -+ dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT); -+ ocd_write(DC, dc); -+ spin_unlock(&ocd_lock); -+ } -+} -+ -+/** -+ * ocd_disable - disable on-chip debugging -+ * @child: task that was being debugged, but isn't anymore -+ * -+ * If @child is non-NULL, ocd_disable() checks if debugging is enabled -+ * for @child, and if it isn't, does nothing. -+ * -+ * If @child is NULL (e.g. when debugging the kernel), or debugging is -+ * enabled, ocd_disable() decrements the reference count, and if it -+ * reaches zero, disables the debugging hardware. -+ */ -+void ocd_disable(struct task_struct *child) -+{ -+ u32 dc; -+ -+ if (!child) -+ pr_debug("ocd_disable (no child)\n"); -+ else if (test_tsk_thread_flag(child, TIF_DEBUG)) -+ pr_debug("ocd_disable: child=%s [%u]\n", -+ child->comm, child->pid); -+ -+ if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) { -+ spin_lock(&ocd_lock); -+ ocd_count--; -+ -+ WARN_ON(ocd_count < 0); -+ -+ if (ocd_count <= 0) { -+ dc = ocd_read(DC); -+ dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT)); -+ ocd_write(DC, dc); -+ } -+ spin_unlock(&ocd_lock); -+ } -+} -+ -+#ifdef CONFIG_DEBUG_FS -+#include <linux/debugfs.h> -+#include <linux/module.h> -+ -+static struct dentry *ocd_debugfs_root; -+static struct dentry *ocd_debugfs_DC; -+static struct dentry *ocd_debugfs_DS; -+static struct dentry *ocd_debugfs_count; -+ -+static u64 ocd_DC_get(void *data) -+{ -+ return ocd_read(DC); -+} -+static void ocd_DC_set(void *data, u64 val) -+{ -+ ocd_write(DC, val); -+} -+DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n"); -+ -+static u64 ocd_DS_get(void *data) -+{ -+ return ocd_read(DS); -+} -+DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n"); -+ -+static u64 ocd_count_get(void *data) -+{ -+ return ocd_count; -+} -+DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n"); -+ -+static void ocd_debugfs_init(void) -+{ -+ struct dentry *root; -+ -+ root = debugfs_create_dir("ocd", NULL); -+ if (IS_ERR(root) || !root) -+ goto err_root; -+ ocd_debugfs_root = root; -+ -+ ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR, -+ root, NULL, &fops_DC); -+ if (!ocd_debugfs_DC) -+ goto err_DC; -+ -+ ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root, -+ NULL, &fops_DS); -+ if (!ocd_debugfs_DS) -+ goto err_DS; -+ -+ ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root, -+ NULL, &fops_count); -+ if (!ocd_debugfs_count) -+ goto err_count; -+ -+ return; -+ -+err_count: -+ debugfs_remove(ocd_debugfs_DS); -+err_DS: -+ debugfs_remove(ocd_debugfs_DC); -+err_DC: -+ debugfs_remove(ocd_debugfs_root); -+err_root: -+ printk(KERN_WARNING "OCD: Failed to create debugfs entries\n"); -+} -+#else -+static inline void ocd_debugfs_init(void) -+{ -+ -+} -+#endif -+ -+static int __init ocd_init(void) -+{ -+ spin_lock_init(&ocd_lock); -+ ocd_debugfs_init(); -+ return 0; -+} -+arch_initcall(ocd_init); -diff -Nrup linux-2.6.24/arch/avr32/kernel/process.c linux-avr32/arch/avr32/kernel/process.c ---- linux-2.6.24/arch/avr32/kernel/process.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/process.c 2008-02-01 14:51:35.000000000 -0500 -@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread); - */ - void exit_thread(void) - { -- /* nothing to do */ -+ ocd_disable(current); - } - - void flush_thread(void) -@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long cl - p->thread.cpu_context.ksp = (unsigned long)childregs; - p->thread.cpu_context.pc = (unsigned long)ret_from_fork; - -+ if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG)) -+ ocd_enable(p); -+ - return 0; - } - -diff -Nrup linux-2.6.24/arch/avr32/kernel/ptrace.c linux-avr32/arch/avr32/kernel/ptrace.c ---- linux-2.6.24/arch/avr32/kernel/ptrace.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/ptrace.c 2008-02-01 14:51:35.000000000 -0500 -@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct * - { - clear_tsk_thread_flag(child, TIF_SINGLE_STEP); - clear_tsk_thread_flag(child, TIF_BREAKPOINT); -+ ocd_disable(child); - } - - /* -@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *chi - { - int ret; - -- pr_debug("ptrace: Enabling monitor mode...\n"); -- ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT) -- | (1 << OCD_DC_DBE_BIT)); -- - switch (request) { - /* Read the word at location addr in the child process */ - case PTRACE_PEEKTEXT: -diff -Nrup linux-2.6.24/arch/avr32/kernel/setup.c linux-avr32/arch/avr32/kernel/setup.c ---- linux-2.6.24/arch/avr32/kernel/setup.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/setup.c 2008-02-01 14:51:35.000000000 -0500 -@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char - printk(KERN_WARNING - "Failed to allocate framebuffer memory\n"); - fbmem_size = 0; -+ } else { -+ memset(__va(fbmem_start), 0, fbmem_size); - } - } - -diff -Nrup linux-2.6.24/arch/avr32/kernel/signal.c linux-avr32/arch/avr32/kernel/signal.c ---- linux-2.6.24/arch/avr32/kernel/signal.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/signal.c 2008-02-01 14:51:35.000000000 -0500 -@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigs - if (!user_mode(regs)) - return 0; - -- if (try_to_freeze()) { -- signr = 0; -- if (!signal_pending(current)) -- goto no_signal; -- } -- - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else if (!oldset) - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); --no_signal: - if (syscall) { - switch (regs->r12) { - case -ERESTART_RESTARTBLOCK: -diff -Nrup linux-2.6.24/arch/avr32/kernel/traps.c linux-avr32/arch/avr32/kernel/traps.c ---- linux-2.6.24/arch/avr32/kernel/traps.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/kernel/traps.c 2008-02-01 14:51:35.000000000 -0500 -@@ -9,6 +9,7 @@ - #include <linux/bug.h> - #include <linux/init.h> - #include <linux/kallsyms.h> -+#include <linux/kdebug.h> - #include <linux/module.h> - #include <linux/notifier.h> - #include <linux/sched.h> -@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_re - - asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) - { -- printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n"); -- show_regs_log_lvl(regs, KERN_ALERT); -- show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT); -+ int ret; -+ -+ nmi_enter(); -+ -+ ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT); -+ switch (ret) { -+ case NOTIFY_OK: -+ case NOTIFY_STOP: -+ return; -+ case NOTIFY_BAD: -+ die("Fatal Non-Maskable Interrupt", regs, SIGINT); -+ default: -+ break; -+ } -+ -+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); -+ nmi_disable(); - } - - asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs) -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c ---- linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c 1969-12-31 19:00:00.000000000 -0500 -@@ -1,1730 +0,0 @@ --/* -- * Copyright (C) 2005-2006 Atmel Corporation -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- */ --#include <linux/clk.h> --#include <linux/fb.h> --#include <linux/init.h> --#include <linux/platform_device.h> --#include <linux/dma-mapping.h> --#include <linux/spi/spi.h> -- --#include <asm/io.h> -- --#include <asm/arch/at32ap7000.h> --#include <asm/arch/board.h> --#include <asm/arch/portmux.h> -- --#include <video/atmel_lcdc.h> -- --#include "clock.h" --#include "hmatrix.h" --#include "pio.h" --#include "pm.h" -- -- --#define PBMEM(base) \ -- { \ -- .start = base, \ -- .end = base + 0x3ff, \ -- .flags = IORESOURCE_MEM, \ -- } --#define IRQ(num) \ -- { \ -- .start = num, \ -- .end = num, \ -- .flags = IORESOURCE_IRQ, \ -- } --#define NAMED_IRQ(num, _name) \ -- { \ -- .start = num, \ -- .end = num, \ -- .name = _name, \ -- .flags = IORESOURCE_IRQ, \ -- } -- --/* REVISIT these assume *every* device supports DMA, but several -- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more. -- */ --#define DEFINE_DEV(_name, _id) \ --static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ --static struct platform_device _name##_id##_device = { \ -- .name = #_name, \ -- .id = _id, \ -- .dev = { \ -- .dma_mask = &_name##_id##_dma_mask, \ -- .coherent_dma_mask = DMA_32BIT_MASK, \ -- }, \ -- .resource = _name##_id##_resource, \ -- .num_resources = ARRAY_SIZE(_name##_id##_resource), \ --} --#define DEFINE_DEV_DATA(_name, _id) \ --static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ --static struct platform_device _name##_id##_device = { \ -- .name = #_name, \ -- .id = _id, \ -- .dev = { \ -- .dma_mask = &_name##_id##_dma_mask, \ -- .platform_data = &_name##_id##_data, \ -- .coherent_dma_mask = DMA_32BIT_MASK, \ -- }, \ -- .resource = _name##_id##_resource, \ -- .num_resources = ARRAY_SIZE(_name##_id##_resource), \ --} -- --#define select_peripheral(pin, periph, flags) \ -- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags) -- --#define DEV_CLK(_name, devname, bus, _index) \ --static struct clk devname##_##_name = { \ -- .name = #_name, \ -- .dev = &devname##_device.dev, \ -- .parent = &bus##_clk, \ -- .mode = bus##_clk_mode, \ -- .get_rate = bus##_clk_get_rate, \ -- .index = _index, \ --} -- --static DEFINE_SPINLOCK(pm_lock); -- --unsigned long at32ap7000_osc_rates[3] = { -- [0] = 32768, -- /* FIXME: these are ATSTK1002-specific */ -- [1] = 20000000, -- [2] = 12000000, --}; -- --static unsigned long osc_get_rate(struct clk *clk) --{ -- return at32ap7000_osc_rates[clk->index]; --} -- --static unsigned long pll_get_rate(struct clk *clk, unsigned long control) --{ -- unsigned long div, mul, rate; -- -- if (!(control & PM_BIT(PLLEN))) -- return 0; -- -- div = PM_BFEXT(PLLDIV, control) + 1; -- mul = PM_BFEXT(PLLMUL, control) + 1; -- -- rate = clk->parent->get_rate(clk->parent); -- rate = (rate + div / 2) / div; -- rate *= mul; -- -- return rate; --} -- --static unsigned long pll0_get_rate(struct clk *clk) --{ -- u32 control; -- -- control = pm_readl(PLL0); -- -- return pll_get_rate(clk, control); --} -- --static unsigned long pll1_get_rate(struct clk *clk) --{ -- u32 control; -- -- control = pm_readl(PLL1); -- -- return pll_get_rate(clk, control); --} -- --/* -- * The AT32AP7000 has five primary clock sources: One 32kHz -- * oscillator, two crystal oscillators and two PLLs. -- */ --static struct clk osc32k = { -- .name = "osc32k", -- .get_rate = osc_get_rate, -- .users = 1, -- .index = 0, --}; --static struct clk osc0 = { -- .name = "osc0", -- .get_rate = osc_get_rate, -- .users = 1, -- .index = 1, --}; --static struct clk osc1 = { -- .name = "osc1", -- .get_rate = osc_get_rate, -- .index = 2, --}; --static struct clk pll0 = { -- .name = "pll0", -- .get_rate = pll0_get_rate, -- .parent = &osc0, --}; --static struct clk pll1 = { -- .name = "pll1", -- .get_rate = pll1_get_rate, -- .parent = &osc0, --}; -- --/* -- * The main clock can be either osc0 or pll0. The boot loader may -- * have chosen one for us, so we don't really know which one until we -- * have a look at the SM. -- */ --static struct clk *main_clock; -- --/* -- * Synchronous clocks are generated from the main clock. The clocks -- * must satisfy the constraint -- * fCPU >= fHSB >= fPB -- * i.e. each clock must not be faster than its parent. -- */ --static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift) --{ -- return main_clock->get_rate(main_clock) >> shift; --}; -- --static void cpu_clk_mode(struct clk *clk, int enabled) --{ -- unsigned long flags; -- u32 mask; -- -- spin_lock_irqsave(&pm_lock, flags); -- mask = pm_readl(CPU_MASK); -- if (enabled) -- mask |= 1 << clk->index; -- else -- mask &= ~(1 << clk->index); -- pm_writel(CPU_MASK, mask); -- spin_unlock_irqrestore(&pm_lock, flags); --} -- --static unsigned long cpu_clk_get_rate(struct clk *clk) --{ -- unsigned long cksel, shift = 0; -- -- cksel = pm_readl(CKSEL); -- if (cksel & PM_BIT(CPUDIV)) -- shift = PM_BFEXT(CPUSEL, cksel) + 1; -- -- return bus_clk_get_rate(clk, shift); --} -- --static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply) --{ -- u32 control; -- unsigned long parent_rate, child_div, actual_rate, div; -- -- parent_rate = clk->parent->get_rate(clk->parent); -- control = pm_readl(CKSEL); -- -- if (control & PM_BIT(HSBDIV)) -- child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1); -- else -- child_div = 1; -- -- if (rate > 3 * (parent_rate / 4) || child_div == 1) { -- actual_rate = parent_rate; -- control &= ~PM_BIT(CPUDIV); -- } else { -- unsigned int cpusel; -- div = (parent_rate + rate / 2) / rate; -- if (div > child_div) -- div = child_div; -- cpusel = (div > 1) ? (fls(div) - 2) : 0; -- control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control); -- actual_rate = parent_rate / (1 << (cpusel + 1)); -- } -- -- pr_debug("clk %s: new rate %lu (actual rate %lu)\n", -- clk->name, rate, actual_rate); -- -- if (apply) -- pm_writel(CKSEL, control); -- -- return actual_rate; --} -- --static void hsb_clk_mode(struct clk *clk, int enabled) --{ -- unsigned long flags; -- u32 mask; -- -- spin_lock_irqsave(&pm_lock, flags); -- mask = pm_readl(HSB_MASK); -- if (enabled) -- mask |= 1 << clk->index; -- else -- mask &= ~(1 << clk->index); -- pm_writel(HSB_MASK, mask); -- spin_unlock_irqrestore(&pm_lock, flags); --} -- --static unsigned long hsb_clk_get_rate(struct clk *clk) --{ -- unsigned long cksel, shift = 0; -- -- cksel = pm_readl(CKSEL); -- if (cksel & PM_BIT(HSBDIV)) -- shift = PM_BFEXT(HSBSEL, cksel) + 1; -- -- return bus_clk_get_rate(clk, shift); --} -- --static void pba_clk_mode(struct clk *clk, int enabled) --{ -- unsigned long flags; -- u32 mask; -- -- spin_lock_irqsave(&pm_lock, flags); -- mask = pm_readl(PBA_MASK); -- if (enabled) -- mask |= 1 << clk->index; -- else -- mask &= ~(1 << clk->index); -- pm_writel(PBA_MASK, mask); -- spin_unlock_irqrestore(&pm_lock, flags); --} -- --static unsigned long pba_clk_get_rate(struct clk *clk) --{ -- unsigned long cksel, shift = 0; -- -- cksel = pm_readl(CKSEL); -- if (cksel & PM_BIT(PBADIV)) -- shift = PM_BFEXT(PBASEL, cksel) + 1; -- -- return bus_clk_get_rate(clk, shift); --} -- --static void pbb_clk_mode(struct clk *clk, int enabled) --{ -- unsigned long flags; -- u32 mask; -- -- spin_lock_irqsave(&pm_lock, flags); -- mask = pm_readl(PBB_MASK); -- if (enabled) -- mask |= 1 << clk->index; -- else -- mask &= ~(1 << clk->index); -- pm_writel(PBB_MASK, mask); -- spin_unlock_irqrestore(&pm_lock, flags); --} -- --static unsigned long pbb_clk_get_rate(struct clk *clk) --{ -- unsigned long cksel, shift = 0; -- -- cksel = pm_readl(CKSEL); -- if (cksel & PM_BIT(PBBDIV)) -- shift = PM_BFEXT(PBBSEL, cksel) + 1; -- -- return bus_clk_get_rate(clk, shift); --} -- --static struct clk cpu_clk = { -- .name = "cpu", -- .get_rate = cpu_clk_get_rate, -- .set_rate = cpu_clk_set_rate, -- .users = 1, --}; --static struct clk hsb_clk = { -- .name = "hsb", -- .parent = &cpu_clk, -- .get_rate = hsb_clk_get_rate, --}; --static struct clk pba_clk = { -- .name = "pba", -- .parent = &hsb_clk, -- .mode = hsb_clk_mode, -- .get_rate = pba_clk_get_rate, -- .index = 1, --}; --static struct clk pbb_clk = { -- .name = "pbb", -- .parent = &hsb_clk, -- .mode = hsb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .users = 1, -- .index = 2, --}; -- --/* -------------------------------------------------------------------- -- * Generic Clock operations -- * -------------------------------------------------------------------- */ -- --static void genclk_mode(struct clk *clk, int enabled) --{ -- u32 control; -- -- control = pm_readl(GCCTRL(clk->index)); -- if (enabled) -- control |= PM_BIT(CEN); -- else -- control &= ~PM_BIT(CEN); -- pm_writel(GCCTRL(clk->index), control); --} -- --static unsigned long genclk_get_rate(struct clk *clk) --{ -- u32 control; -- unsigned long div = 1; -- -- control = pm_readl(GCCTRL(clk->index)); -- if (control & PM_BIT(DIVEN)) -- div = 2 * (PM_BFEXT(DIV, control) + 1); -- -- return clk->parent->get_rate(clk->parent) / div; --} -- --static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) --{ -- u32 control; -- unsigned long parent_rate, actual_rate, div; -- -- parent_rate = clk->parent->get_rate(clk->parent); -- control = pm_readl(GCCTRL(clk->index)); -- -- if (rate > 3 * parent_rate / 4) { -- actual_rate = parent_rate; -- control &= ~PM_BIT(DIVEN); -- } else { -- div = (parent_rate + rate) / (2 * rate) - 1; -- control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN); -- actual_rate = parent_rate / (2 * (div + 1)); -- } -- -- dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n", -- clk->name, rate, actual_rate); -- -- if (apply) -- pm_writel(GCCTRL(clk->index), control); -- -- return actual_rate; --} -- --int genclk_set_parent(struct clk *clk, struct clk *parent) --{ -- u32 control; -- -- dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n", -- clk->name, parent->name, clk->parent->name); -- -- control = pm_readl(GCCTRL(clk->index)); -- -- if (parent == &osc1 || parent == &pll1) -- control |= PM_BIT(OSCSEL); -- else if (parent == &osc0 || parent == &pll0) -- control &= ~PM_BIT(OSCSEL); -- else -- return -EINVAL; -- -- if (parent == &pll0 || parent == &pll1) -- control |= PM_BIT(PLLSEL); -- else -- control &= ~PM_BIT(PLLSEL); -- -- pm_writel(GCCTRL(clk->index), control); -- clk->parent = parent; -- -- return 0; --} -- --static void __init genclk_init_parent(struct clk *clk) --{ -- u32 control; -- struct clk *parent; -- -- BUG_ON(clk->index > 7); -- -- control = pm_readl(GCCTRL(clk->index)); -- if (control & PM_BIT(OSCSEL)) -- parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1; -- else -- parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0; -- -- clk->parent = parent; --} -- --/* -------------------------------------------------------------------- -- * System peripherals -- * -------------------------------------------------------------------- */ --static struct resource at32_pm0_resource[] = { -- { -- .start = 0xfff00000, -- .end = 0xfff0007f, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(20), --}; -- --static struct resource at32ap700x_rtc0_resource[] = { -- { -- .start = 0xfff00080, -- .end = 0xfff000af, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(21), --}; -- --static struct resource at32_wdt0_resource[] = { -- { -- .start = 0xfff000b0, -- .end = 0xfff000cf, -- .flags = IORESOURCE_MEM, -- }, --}; -- --static struct resource at32_eic0_resource[] = { -- { -- .start = 0xfff00100, -- .end = 0xfff0013f, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(19), --}; -- --DEFINE_DEV(at32_pm, 0); --DEFINE_DEV(at32ap700x_rtc, 0); --DEFINE_DEV(at32_wdt, 0); --DEFINE_DEV(at32_eic, 0); -- --/* -- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this -- * is always running. -- */ --static struct clk at32_pm_pclk = { -- .name = "pclk", -- .dev = &at32_pm0_device.dev, -- .parent = &pbb_clk, -- .mode = pbb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .users = 1, -- .index = 0, --}; -- --static struct resource intc0_resource[] = { -- PBMEM(0xfff00400), --}; --struct platform_device at32_intc0_device = { -- .name = "intc", -- .id = 0, -- .resource = intc0_resource, -- .num_resources = ARRAY_SIZE(intc0_resource), --}; --DEV_CLK(pclk, at32_intc0, pbb, 1); -- --static struct clk ebi_clk = { -- .name = "ebi", -- .parent = &hsb_clk, -- .mode = hsb_clk_mode, -- .get_rate = hsb_clk_get_rate, -- .users = 1, --}; --static struct clk hramc_clk = { -- .name = "hramc", -- .parent = &hsb_clk, -- .mode = hsb_clk_mode, -- .get_rate = hsb_clk_get_rate, -- .users = 1, -- .index = 3, --}; -- --static struct resource smc0_resource[] = { -- PBMEM(0xfff03400), --}; --DEFINE_DEV(smc, 0); --DEV_CLK(pclk, smc0, pbb, 13); --DEV_CLK(mck, smc0, hsb, 0); -- --static struct platform_device pdc_device = { -- .name = "pdc", -- .id = 0, --}; --DEV_CLK(hclk, pdc, hsb, 4); --DEV_CLK(pclk, pdc, pba, 16); -- --static struct clk pico_clk = { -- .name = "pico", -- .parent = &cpu_clk, -- .mode = cpu_clk_mode, -- .get_rate = cpu_clk_get_rate, -- .users = 1, --}; -- --static struct resource dmaca0_resource[] = { -- { -- .start = 0xff200000, -- .end = 0xff20ffff, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(2), --}; --DEFINE_DEV(dmaca, 0); --DEV_CLK(hclk, dmaca0, hsb, 10); -- --/* -------------------------------------------------------------------- -- * HMATRIX -- * -------------------------------------------------------------------- */ -- --static struct clk hmatrix_clk = { -- .name = "hmatrix_clk", -- .parent = &pbb_clk, -- .mode = pbb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .index = 2, -- .users = 1, --}; --#define HMATRIX_BASE ((void __iomem *)0xfff00800) -- --#define hmatrix_readl(reg) \ -- __raw_readl((HMATRIX_BASE) + HMATRIX_##reg) --#define hmatrix_writel(reg,value) \ -- __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg) -- --/* -- * Set bits in the HMATRIX Special Function Register (SFR) used by the -- * External Bus Interface (EBI). This can be used to enable special -- * features like CompactFlash support, NAND Flash support, etc. on -- * certain chipselects. -- */ --static inline void set_ebi_sfr_bits(u32 mask) --{ -- u32 sfr; -- -- clk_enable(&hmatrix_clk); -- sfr = hmatrix_readl(SFR4); -- sfr |= mask; -- hmatrix_writel(SFR4, sfr); -- clk_disable(&hmatrix_clk); --} -- --/* -------------------------------------------------------------------- -- * System Timer/Counter (TC) -- * -------------------------------------------------------------------- */ --static struct resource at32_systc0_resource[] = { -- PBMEM(0xfff00c00), -- IRQ(22), --}; --struct platform_device at32_systc0_device = { -- .name = "systc", -- .id = 0, -- .resource = at32_systc0_resource, -- .num_resources = ARRAY_SIZE(at32_systc0_resource), --}; --DEV_CLK(pclk, at32_systc0, pbb, 3); -- --/* -------------------------------------------------------------------- -- * PIO -- * -------------------------------------------------------------------- */ -- --static struct resource pio0_resource[] = { -- PBMEM(0xffe02800), -- IRQ(13), --}; --DEFINE_DEV(pio, 0); --DEV_CLK(mck, pio0, pba, 10); -- --static struct resource pio1_resource[] = { -- PBMEM(0xffe02c00), -- IRQ(14), --}; --DEFINE_DEV(pio, 1); --DEV_CLK(mck, pio1, pba, 11); -- --static struct resource pio2_resource[] = { -- PBMEM(0xffe03000), -- IRQ(15), --}; --DEFINE_DEV(pio, 2); --DEV_CLK(mck, pio2, pba, 12); -- --static struct resource pio3_resource[] = { -- PBMEM(0xffe03400), -- IRQ(16), --}; --DEFINE_DEV(pio, 3); --DEV_CLK(mck, pio3, pba, 13); -- --static struct resource pio4_resource[] = { -- PBMEM(0xffe03800), -- IRQ(17), --}; --DEFINE_DEV(pio, 4); --DEV_CLK(mck, pio4, pba, 14); -- --void __init at32_add_system_devices(void) --{ -- platform_device_register(&at32_pm0_device); -- platform_device_register(&at32_intc0_device); -- platform_device_register(&at32ap700x_rtc0_device); -- platform_device_register(&at32_wdt0_device); -- platform_device_register(&at32_eic0_device); -- platform_device_register(&smc0_device); -- platform_device_register(&pdc_device); -- platform_device_register(&dmaca0_device); -- -- platform_device_register(&at32_systc0_device); -- -- platform_device_register(&pio0_device); -- platform_device_register(&pio1_device); -- platform_device_register(&pio2_device); -- platform_device_register(&pio3_device); -- platform_device_register(&pio4_device); --} -- --/* -------------------------------------------------------------------- -- * USART -- * -------------------------------------------------------------------- */ -- --static struct atmel_uart_data atmel_usart0_data = { -- .use_dma_tx = 1, -- .use_dma_rx = 1, --}; --static struct resource atmel_usart0_resource[] = { -- PBMEM(0xffe00c00), -- IRQ(6), --}; --DEFINE_DEV_DATA(atmel_usart, 0); --DEV_CLK(usart, atmel_usart0, pba, 3); -- --static struct atmel_uart_data atmel_usart1_data = { -- .use_dma_tx = 1, -- .use_dma_rx = 1, --}; --static struct resource atmel_usart1_resource[] = { -- PBMEM(0xffe01000), -- IRQ(7), --}; --DEFINE_DEV_DATA(atmel_usart, 1); --DEV_CLK(usart, atmel_usart1, pba, 4); -- --static struct atmel_uart_data atmel_usart2_data = { -- .use_dma_tx = 1, -- .use_dma_rx = 1, --}; --static struct resource atmel_usart2_resource[] = { -- PBMEM(0xffe01400), -- IRQ(8), --}; --DEFINE_DEV_DATA(atmel_usart, 2); --DEV_CLK(usart, atmel_usart2, pba, 5); -- --static struct atmel_uart_data atmel_usart3_data = { -- .use_dma_tx = 1, -- .use_dma_rx = 1, --}; --static struct resource atmel_usart3_resource[] = { -- PBMEM(0xffe01800), -- IRQ(9), --}; --DEFINE_DEV_DATA(atmel_usart, 3); --DEV_CLK(usart, atmel_usart3, pba, 6); -- --static inline void configure_usart0_pins(void) --{ -- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */ -- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */ --} -- --static inline void configure_usart1_pins(void) --{ -- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */ -- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */ --} -- --static inline void configure_usart2_pins(void) --{ -- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */ -- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */ --} -- --static inline void configure_usart3_pins(void) --{ -- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */ -- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */ --} -- --static struct platform_device *__initdata at32_usarts[4]; -- --void __init at32_map_usart(unsigned int hw_id, unsigned int line) --{ -- struct platform_device *pdev; -- -- switch (hw_id) { -- case 0: -- pdev = &atmel_usart0_device; -- configure_usart0_pins(); -- break; -- case 1: -- pdev = &atmel_usart1_device; -- configure_usart1_pins(); -- break; -- case 2: -- pdev = &atmel_usart2_device; -- configure_usart2_pins(); -- break; -- case 3: -- pdev = &atmel_usart3_device; -- configure_usart3_pins(); -- break; -- default: -- return; -- } -- -- if (PXSEG(pdev->resource[0].start) == P4SEG) { -- /* Addresses in the P4 segment are permanently mapped 1:1 */ -- struct atmel_uart_data *data = pdev->dev.platform_data; -- data->regs = (void __iomem *)pdev->resource[0].start; -- } -- -- pdev->id = line; -- at32_usarts[line] = pdev; --} -- --struct platform_device *__init at32_add_device_usart(unsigned int id) --{ -- platform_device_register(at32_usarts[id]); -- return at32_usarts[id]; --} -- --struct platform_device *atmel_default_console_device; -- --void __init at32_setup_serial_console(unsigned int usart_id) --{ -- atmel_default_console_device = at32_usarts[usart_id]; --} -- --/* -------------------------------------------------------------------- -- * Ethernet -- * -------------------------------------------------------------------- */ -- --static struct eth_platform_data macb0_data; --static struct resource macb0_resource[] = { -- PBMEM(0xfff01800), -- IRQ(25), --}; --DEFINE_DEV_DATA(macb, 0); --DEV_CLK(hclk, macb0, hsb, 8); --DEV_CLK(pclk, macb0, pbb, 6); -- --static struct eth_platform_data macb1_data; --static struct resource macb1_resource[] = { -- PBMEM(0xfff01c00), -- IRQ(26), --}; --DEFINE_DEV_DATA(macb, 1); --DEV_CLK(hclk, macb1, hsb, 9); --DEV_CLK(pclk, macb1, pbb, 7); -- --struct platform_device *__init --at32_add_device_eth(unsigned int id, struct eth_platform_data *data) --{ -- struct platform_device *pdev; -- -- switch (id) { -- case 0: -- pdev = &macb0_device; -- -- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */ -- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */ -- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */ -- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */ -- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */ -- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */ -- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */ -- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */ -- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */ -- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */ -- -- if (!data->is_rmii) { -- select_peripheral(PC(0), PERIPH_A, 0); /* COL */ -- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */ -- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */ -- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */ -- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */ -- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */ -- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */ -- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */ -- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */ -- } -- break; -- -- case 1: -- pdev = &macb1_device; -- -- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */ -- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */ -- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */ -- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */ -- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */ -- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */ -- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */ -- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */ -- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */ -- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */ -- -- if (!data->is_rmii) { -- select_peripheral(PC(19), PERIPH_B, 0); /* COL */ -- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */ -- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */ -- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */ -- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */ -- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */ -- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */ -- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */ -- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */ -- } -- break; -- -- default: -- return NULL; -- } -- -- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data)); -- platform_device_register(pdev); -- -- return pdev; --} -- --/* -------------------------------------------------------------------- -- * SPI -- * -------------------------------------------------------------------- */ --static struct resource atmel_spi0_resource[] = { -- PBMEM(0xffe00000), -- IRQ(3), --}; --DEFINE_DEV(atmel_spi, 0); --DEV_CLK(spi_clk, atmel_spi0, pba, 0); -- --static struct resource atmel_spi1_resource[] = { -- PBMEM(0xffe00400), -- IRQ(4), --}; --DEFINE_DEV(atmel_spi, 1); --DEV_CLK(spi_clk, atmel_spi1, pba, 1); -- --static void __init --at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, -- unsigned int n, const u8 *pins) --{ -- unsigned int pin, mode; -- -- for (; n; n--, b++) { -- b->bus_num = bus_num; -- if (b->chip_select >= 4) -- continue; -- pin = (unsigned)b->controller_data; -- if (!pin) { -- pin = pins[b->chip_select]; -- b->controller_data = (void *)pin; -- } -- mode = AT32_GPIOF_OUTPUT; -- if (!(b->mode & SPI_CS_HIGH)) -- mode |= AT32_GPIOF_HIGH; -- at32_select_gpio(pin, mode); -- } --} -- --struct platform_device *__init --at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) --{ -- /* -- * Manage the chipselects as GPIOs, normally using the same pins -- * the SPI controller expects; but boards can use other pins. -- */ -- static u8 __initdata spi0_pins[] = -- { GPIO_PIN_PA(3), GPIO_PIN_PA(4), -- GPIO_PIN_PA(5), GPIO_PIN_PA(20), }; -- static u8 __initdata spi1_pins[] = -- { GPIO_PIN_PB(2), GPIO_PIN_PB(3), -- GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; -- struct platform_device *pdev; -- -- switch (id) { -- case 0: -- pdev = &atmel_spi0_device; -- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ -- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ -- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ -- at32_spi_setup_slaves(0, b, n, spi0_pins); -- break; -- -- case 1: -- pdev = &atmel_spi1_device; -- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ -- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ -- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ -- at32_spi_setup_slaves(1, b, n, spi1_pins); -- break; -- -- default: -- return NULL; -- } -- -- spi_register_board_info(b, n); -- platform_device_register(pdev); -- return pdev; --} -- --/* -------------------------------------------------------------------- -- * TWI -- * -------------------------------------------------------------------- */ --static struct resource atmel_twi0_resource[] __initdata = { -- PBMEM(0xffe00800), -- IRQ(5), --}; --static struct clk atmel_twi0_pclk = { -- .name = "twi_pclk", -- .parent = &pba_clk, -- .mode = pba_clk_mode, -- .get_rate = pba_clk_get_rate, -- .index = 2, --}; -- --struct platform_device *__init at32_add_device_twi(unsigned int id) --{ -- struct platform_device *pdev; -- -- if (id != 0) -- return NULL; -- -- pdev = platform_device_alloc("atmel_twi", id); -- if (!pdev) -- return NULL; -- -- if (platform_device_add_resources(pdev, atmel_twi0_resource, -- ARRAY_SIZE(atmel_twi0_resource))) -- goto err_add_resources; -- -- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */ -- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */ -- -- atmel_twi0_pclk.dev = &pdev->dev; -- -- platform_device_add(pdev); -- return pdev; -- --err_add_resources: -- platform_device_put(pdev); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * MMC -- * -------------------------------------------------------------------- */ --static struct resource atmel_mci0_resource[] __initdata = { -- PBMEM(0xfff02400), -- IRQ(28), --}; --static struct clk atmel_mci0_pclk = { -- .name = "mci_clk", -- .parent = &pbb_clk, -- .mode = pbb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .index = 9, --}; -- --struct platform_device *__init at32_add_device_mci(unsigned int id) --{ -- struct platform_device *pdev; -- -- if (id != 0) -- return NULL; -- -- pdev = platform_device_alloc("atmel_mci", id); -- if (!pdev) -- return NULL; -- -- if (platform_device_add_resources(pdev, atmel_mci0_resource, -- ARRAY_SIZE(atmel_mci0_resource))) -- goto err_add_resources; -- -- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ -- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ -- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ -- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ -- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ -- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ -- -- atmel_mci0_pclk.dev = &pdev->dev; -- -- platform_device_add(pdev); -- return pdev; -- --err_add_resources: -- platform_device_put(pdev); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * LCDC -- * -------------------------------------------------------------------- */ --static struct atmel_lcdfb_info atmel_lcdfb0_data; --static struct resource atmel_lcdfb0_resource[] = { -- { -- .start = 0xff000000, -- .end = 0xff000fff, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(1), -- { -- /* Placeholder for pre-allocated fb memory */ -- .start = 0x00000000, -- .end = 0x00000000, -- .flags = 0, -- }, --}; --DEFINE_DEV_DATA(atmel_lcdfb, 0); --DEV_CLK(hck1, atmel_lcdfb0, hsb, 7); --static struct clk atmel_lcdfb0_pixclk = { -- .name = "lcdc_clk", -- .dev = &atmel_lcdfb0_device.dev, -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 7, --}; -- --struct platform_device *__init --at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, -- unsigned long fbmem_start, unsigned long fbmem_len) --{ -- struct platform_device *pdev; -- struct atmel_lcdfb_info *info; -- struct fb_monspecs *monspecs; -- struct fb_videomode *modedb; -- unsigned int modedb_size; -- -- /* -- * Do a deep copy of the fb data, monspecs and modedb. Make -- * sure all allocations are done before setting up the -- * portmux. -- */ -- monspecs = kmemdup(data->default_monspecs, -- sizeof(struct fb_monspecs), GFP_KERNEL); -- if (!monspecs) -- return NULL; -- -- modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len; -- modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL); -- if (!modedb) -- goto err_dup_modedb; -- monspecs->modedb = modedb; -- -- switch (id) { -- case 0: -- pdev = &atmel_lcdfb0_device; -- select_peripheral(PC(19), PERIPH_A, 0); /* CC */ -- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ -- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ -- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ -- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ -- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ -- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ -- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ -- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ -- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ -- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ -- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ -- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ -- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ -- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ -- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ -- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ -- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ -- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ -- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ -- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ -- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ -- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ -- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ -- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ -- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ -- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ -- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ -- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ -- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ -- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ -- -- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); -- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); -- break; -- -- default: -- goto err_invalid_id; -- } -- -- if (fbmem_len) { -- pdev->resource[2].start = fbmem_start; -- pdev->resource[2].end = fbmem_start + fbmem_len - 1; -- pdev->resource[2].flags = IORESOURCE_MEM; -- } -- -- info = pdev->dev.platform_data; -- memcpy(info, data, sizeof(struct atmel_lcdfb_info)); -- info->default_monspecs = monspecs; -- -- platform_device_register(pdev); -- return pdev; -- --err_invalid_id: -- kfree(modedb); --err_dup_modedb: -- kfree(monspecs); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * SSC -- * -------------------------------------------------------------------- */ --static struct resource ssc0_resource[] = { -- PBMEM(0xffe01c00), -- IRQ(10), --}; --DEFINE_DEV(ssc, 0); --DEV_CLK(pclk, ssc0, pba, 7); -- --static struct resource ssc1_resource[] = { -- PBMEM(0xffe02000), -- IRQ(11), --}; --DEFINE_DEV(ssc, 1); --DEV_CLK(pclk, ssc1, pba, 8); -- --static struct resource ssc2_resource[] = { -- PBMEM(0xffe02400), -- IRQ(12), --}; --DEFINE_DEV(ssc, 2); --DEV_CLK(pclk, ssc2, pba, 9); -- --struct platform_device *__init --at32_add_device_ssc(unsigned int id, unsigned int flags) --{ -- struct platform_device *pdev; -- -- switch (id) { -- case 0: -- pdev = &ssc0_device; -- if (flags & ATMEL_SSC_RF) -- select_peripheral(PA(21), PERIPH_A, 0); /* RF */ -- if (flags & ATMEL_SSC_RK) -- select_peripheral(PA(22), PERIPH_A, 0); /* RK */ -- if (flags & ATMEL_SSC_TK) -- select_peripheral(PA(23), PERIPH_A, 0); /* TK */ -- if (flags & ATMEL_SSC_TF) -- select_peripheral(PA(24), PERIPH_A, 0); /* TF */ -- if (flags & ATMEL_SSC_TD) -- select_peripheral(PA(25), PERIPH_A, 0); /* TD */ -- if (flags & ATMEL_SSC_RD) -- select_peripheral(PA(26), PERIPH_A, 0); /* RD */ -- break; -- case 1: -- pdev = &ssc1_device; -- if (flags & ATMEL_SSC_RF) -- select_peripheral(PA(0), PERIPH_B, 0); /* RF */ -- if (flags & ATMEL_SSC_RK) -- select_peripheral(PA(1), PERIPH_B, 0); /* RK */ -- if (flags & ATMEL_SSC_TK) -- select_peripheral(PA(2), PERIPH_B, 0); /* TK */ -- if (flags & ATMEL_SSC_TF) -- select_peripheral(PA(3), PERIPH_B, 0); /* TF */ -- if (flags & ATMEL_SSC_TD) -- select_peripheral(PA(4), PERIPH_B, 0); /* TD */ -- if (flags & ATMEL_SSC_RD) -- select_peripheral(PA(5), PERIPH_B, 0); /* RD */ -- break; -- case 2: -- pdev = &ssc2_device; -- if (flags & ATMEL_SSC_TD) -- select_peripheral(PB(13), PERIPH_A, 0); /* TD */ -- if (flags & ATMEL_SSC_RD) -- select_peripheral(PB(14), PERIPH_A, 0); /* RD */ -- if (flags & ATMEL_SSC_TK) -- select_peripheral(PB(15), PERIPH_A, 0); /* TK */ -- if (flags & ATMEL_SSC_TF) -- select_peripheral(PB(16), PERIPH_A, 0); /* TF */ -- if (flags & ATMEL_SSC_RF) -- select_peripheral(PB(17), PERIPH_A, 0); /* RF */ -- if (flags & ATMEL_SSC_RK) -- select_peripheral(PB(18), PERIPH_A, 0); /* RK */ -- break; -- default: -- return NULL; -- } -- -- platform_device_register(pdev); -- return pdev; --} -- --/* -------------------------------------------------------------------- -- * USB Device Controller -- * -------------------------------------------------------------------- */ --static struct resource usba0_resource[] __initdata = { -- { -- .start = 0xff300000, -- .end = 0xff3fffff, -- .flags = IORESOURCE_MEM, -- }, { -- .start = 0xfff03000, -- .end = 0xfff033ff, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(31), --}; --static struct clk usba0_pclk = { -- .name = "pclk", -- .parent = &pbb_clk, -- .mode = pbb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .index = 12, --}; --static struct clk usba0_hclk = { -- .name = "hclk", -- .parent = &hsb_clk, -- .mode = hsb_clk_mode, -- .get_rate = hsb_clk_get_rate, -- .index = 6, --}; -- --struct platform_device *__init --at32_add_device_usba(unsigned int id, struct usba_platform_data *data) --{ -- struct platform_device *pdev; -- -- if (id != 0) -- return NULL; -- -- pdev = platform_device_alloc("atmel_usba_udc", 0); -- if (!pdev) -- return NULL; -- -- if (platform_device_add_resources(pdev, usba0_resource, -- ARRAY_SIZE(usba0_resource))) -- goto out_free_pdev; -- -- if (data) { -- if (platform_device_add_data(pdev, data, sizeof(*data))) -- goto out_free_pdev; -- -- if (data->vbus_pin != GPIO_PIN_NONE) -- at32_select_gpio(data->vbus_pin, 0); -- } -- -- usba0_pclk.dev = &pdev->dev; -- usba0_hclk.dev = &pdev->dev; -- -- platform_device_add(pdev); -- -- return pdev; -- --out_free_pdev: -- platform_device_put(pdev); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * IDE / CompactFlash -- * -------------------------------------------------------------------- */ --static struct resource at32_smc_cs4_resource[] __initdata = { -- { -- .start = 0x04000000, -- .end = 0x07ffffff, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(~0UL), /* Magic IRQ will be overridden */ --}; --static struct resource at32_smc_cs5_resource[] __initdata = { -- { -- .start = 0x20000000, -- .end = 0x23ffffff, -- .flags = IORESOURCE_MEM, -- }, -- IRQ(~0UL), /* Magic IRQ will be overridden */ --}; -- --static int __init at32_init_ide_or_cf(struct platform_device *pdev, -- unsigned int cs, unsigned int extint) --{ -- static unsigned int extint_pin_map[4] __initdata = { -- GPIO_PIN_PB(25), -- GPIO_PIN_PB(26), -- GPIO_PIN_PB(27), -- GPIO_PIN_PB(28), -- }; -- static bool common_pins_initialized __initdata = false; -- unsigned int extint_pin; -- int ret; -- -- if (extint >= ARRAY_SIZE(extint_pin_map)) -- return -EINVAL; -- extint_pin = extint_pin_map[extint]; -- -- switch (cs) { -- case 4: -- ret = platform_device_add_resources(pdev, -- at32_smc_cs4_resource, -- ARRAY_SIZE(at32_smc_cs4_resource)); -- if (ret) -- return ret; -- -- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */ -- set_ebi_sfr_bits(HMATRIX_BIT(CS4A)); -- break; -- case 5: -- ret = platform_device_add_resources(pdev, -- at32_smc_cs5_resource, -- ARRAY_SIZE(at32_smc_cs5_resource)); -- if (ret) -- return ret; -- -- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */ -- set_ebi_sfr_bits(HMATRIX_BIT(CS5A)); -- break; -- default: -- return -EINVAL; -- } -- -- if (!common_pins_initialized) { -- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */ -- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */ -- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */ -- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */ -- common_pins_initialized = true; -- } -- -- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH); -- -- pdev->resource[1].start = EIM_IRQ_BASE + extint; -- pdev->resource[1].end = pdev->resource[1].start; -- -- return 0; --} -- --struct platform_device *__init --at32_add_device_ide(unsigned int id, unsigned int extint, -- struct ide_platform_data *data) --{ -- struct platform_device *pdev; -- -- pdev = platform_device_alloc("at32_ide", id); -- if (!pdev) -- goto fail; -- -- if (platform_device_add_data(pdev, data, -- sizeof(struct ide_platform_data))) -- goto fail; -- -- if (at32_init_ide_or_cf(pdev, data->cs, extint)) -- goto fail; -- -- platform_device_add(pdev); -- return pdev; -- --fail: -- platform_device_put(pdev); -- return NULL; --} -- --struct platform_device *__init --at32_add_device_cf(unsigned int id, unsigned int extint, -- struct cf_platform_data *data) --{ -- struct platform_device *pdev; -- -- pdev = platform_device_alloc("at32_cf", id); -- if (!pdev) -- goto fail; -- -- if (platform_device_add_data(pdev, data, -- sizeof(struct cf_platform_data))) -- goto fail; -- -- if (at32_init_ide_or_cf(pdev, data->cs, extint)) -- goto fail; -- -- if (data->detect_pin != GPIO_PIN_NONE) -- at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH); -- if (data->reset_pin != GPIO_PIN_NONE) -- at32_select_gpio(data->reset_pin, 0); -- if (data->vcc_pin != GPIO_PIN_NONE) -- at32_select_gpio(data->vcc_pin, 0); -- /* READY is used as extint, so we can't select it as gpio */ -- -- platform_device_add(pdev); -- return pdev; -- --fail: -- platform_device_put(pdev); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * AC97C -- * -------------------------------------------------------------------- */ --static struct resource atmel_ac97c0_resource[] __initdata = { -- PBMEM(0xfff02800), -- IRQ(29), --}; --static struct clk atmel_ac97c0_pclk = { -- .name = "pclk", -- .parent = &pbb_clk, -- .mode = pbb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .index = 10, --}; -- --struct platform_device *__init at32_add_device_ac97c(unsigned int id) --{ -- struct platform_device *pdev; -- -- if (id != 0) -- return NULL; -- -- pdev = platform_device_alloc("atmel_ac97c", id); -- if (!pdev) -- return NULL; -- -- if (platform_device_add_resources(pdev, atmel_ac97c0_resource, -- ARRAY_SIZE(atmel_ac97c0_resource))) -- goto err_add_resources; -- -- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */ -- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */ -- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */ -- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */ -- -- atmel_ac97c0_pclk.dev = &pdev->dev; -- -- platform_device_add(pdev); -- return pdev; -- --err_add_resources: -- platform_device_put(pdev); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * ABDAC -- * -------------------------------------------------------------------- */ --static struct resource abdac0_resource[] __initdata = { -- PBMEM(0xfff02000), -- IRQ(27), --}; --static struct clk abdac0_pclk = { -- .name = "pclk", -- .parent = &pbb_clk, -- .mode = pbb_clk_mode, -- .get_rate = pbb_clk_get_rate, -- .index = 8, --}; --static struct clk abdac0_sample_clk = { -- .name = "sample_clk", -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 6, --}; -- --struct platform_device *__init at32_add_device_abdac(unsigned int id) --{ -- struct platform_device *pdev; -- -- if (id != 0) -- return NULL; -- -- pdev = platform_device_alloc("abdac", id); -- if (!pdev) -- return NULL; -- -- if (platform_device_add_resources(pdev, abdac0_resource, -- ARRAY_SIZE(abdac0_resource))) -- goto err_add_resources; -- -- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */ -- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */ -- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */ -- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */ -- -- abdac0_pclk.dev = &pdev->dev; -- abdac0_sample_clk.dev = &pdev->dev; -- -- platform_device_add(pdev); -- return pdev; -- --err_add_resources: -- platform_device_put(pdev); -- return NULL; --} -- --/* -------------------------------------------------------------------- -- * GCLK -- * -------------------------------------------------------------------- */ --static struct clk gclk0 = { -- .name = "gclk0", -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 0, --}; --static struct clk gclk1 = { -- .name = "gclk1", -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 1, --}; --static struct clk gclk2 = { -- .name = "gclk2", -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 2, --}; --static struct clk gclk3 = { -- .name = "gclk3", -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 3, --}; --static struct clk gclk4 = { -- .name = "gclk4", -- .mode = genclk_mode, -- .get_rate = genclk_get_rate, -- .set_rate = genclk_set_rate, -- .set_parent = genclk_set_parent, -- .index = 4, --}; -- --struct clk *at32_clock_list[] = { -- &osc32k, -- &osc0, -- &osc1, -- &pll0, -- &pll1, -- &cpu_clk, -- &hsb_clk, -- &pba_clk, -- &pbb_clk, -- &at32_pm_pclk, -- &at32_intc0_pclk, -- &hmatrix_clk, -- &ebi_clk, -- &hramc_clk, -- &smc0_pclk, -- &smc0_mck, -- &pdc_hclk, -- &pdc_pclk, -- &dmaca0_hclk, -- &pico_clk, -- &pio0_mck, -- &pio1_mck, -- &pio2_mck, -- &pio3_mck, -- &pio4_mck, -- &at32_systc0_pclk, -- &atmel_usart0_usart, -- &atmel_usart1_usart, -- &atmel_usart2_usart, -- &atmel_usart3_usart, -- &macb0_hclk, -- &macb0_pclk, -- &macb1_hclk, -- &macb1_pclk, -- &atmel_spi0_spi_clk, -- &atmel_spi1_spi_clk, -- &atmel_twi0_pclk, -- &atmel_mci0_pclk, -- &atmel_lcdfb0_hck1, -- &atmel_lcdfb0_pixclk, -- &ssc0_pclk, -- &ssc1_pclk, -- &ssc2_pclk, -- &usba0_hclk, -- &usba0_pclk, -- &atmel_ac97c0_pclk, -- &abdac0_pclk, -- &abdac0_sample_clk, -- &gclk0, -- &gclk1, -- &gclk2, -- &gclk3, -- &gclk4, --}; --unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); -- --void __init at32_portmux_init(void) --{ -- at32_init_pio(&pio0_device); -- at32_init_pio(&pio1_device); -- at32_init_pio(&pio2_device); -- at32_init_pio(&pio3_device); -- at32_init_pio(&pio4_device); --} -- --void __init at32_clock_init(void) --{ -- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; -- int i; -- -- if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) { -- main_clock = &pll0; -- cpu_clk.parent = &pll0; -- } else { -- main_clock = &osc0; -- cpu_clk.parent = &osc0; -- } -- -- if (pm_readl(PLL0) & PM_BIT(PLLOSC)) -- pll0.parent = &osc1; -- if (pm_readl(PLL1) & PM_BIT(PLLOSC)) -- pll1.parent = &osc1; -- -- genclk_init_parent(&gclk0); -- genclk_init_parent(&gclk1); -- genclk_init_parent(&gclk2); -- genclk_init_parent(&gclk3); -- genclk_init_parent(&gclk4); -- genclk_init_parent(&atmel_lcdfb0_pixclk); -- genclk_init_parent(&abdac0_sample_clk); -- -- /* -- * Turn on all clocks that have at least one user already, and -- * turn off everything else. We only do this for module -- * clocks, and even though it isn't particularly pretty to -- * check the address of the mode function, it should do the -- * trick... -- */ -- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) { -- struct clk *clk = at32_clock_list[i]; -- -- if (clk->users == 0) -- continue; -- -- if (clk->mode == &cpu_clk_mode) -- cpu_mask |= 1 << clk->index; -- else if (clk->mode == &hsb_clk_mode) -- hsb_mask |= 1 << clk->index; -- else if (clk->mode == &pba_clk_mode) -- pba_mask |= 1 << clk->index; -- else if (clk->mode == &pbb_clk_mode) -- pbb_mask |= 1 << clk->index; -- } -- -- pm_writel(CPU_MASK, cpu_mask); -- pm_writel(HSB_MASK, hsb_mask); -- pm_writel(PBA_MASK, pba_mask); -- pm_writel(PBB_MASK, pbb_mask); --} -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c ---- linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,1809 @@ -+/* -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/fb.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/dma-mapping.h> -+#include <linux/spi/spi.h> -+ -+#include <asm/io.h> -+#include <asm/irq.h> -+ -+#include <asm/arch/at32ap700x.h> -+#include <asm/arch/board.h> -+#include <asm/arch/portmux.h> -+ -+#include <video/atmel_lcdc.h> -+ -+#include "clock.h" -+#include "hmatrix.h" -+#include "pio.h" -+#include "pm.h" -+ -+ -+#define PBMEM(base) \ -+ { \ -+ .start = base, \ -+ .end = base + 0x3ff, \ -+ .flags = IORESOURCE_MEM, \ -+ } -+#define IRQ(num) \ -+ { \ -+ .start = num, \ -+ .end = num, \ -+ .flags = IORESOURCE_IRQ, \ -+ } -+#define NAMED_IRQ(num, _name) \ -+ { \ -+ .start = num, \ -+ .end = num, \ -+ .name = _name, \ -+ .flags = IORESOURCE_IRQ, \ -+ } -+ -+/* REVISIT these assume *every* device supports DMA, but several -+ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more. -+ */ -+#define DEFINE_DEV(_name, _id) \ -+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ -+static struct platform_device _name##_id##_device = { \ -+ .name = #_name, \ -+ .id = _id, \ -+ .dev = { \ -+ .dma_mask = &_name##_id##_dma_mask, \ -+ .coherent_dma_mask = DMA_32BIT_MASK, \ -+ }, \ -+ .resource = _name##_id##_resource, \ -+ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ -+} -+#define DEFINE_DEV_DATA(_name, _id) \ -+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ -+static struct platform_device _name##_id##_device = { \ -+ .name = #_name, \ -+ .id = _id, \ -+ .dev = { \ -+ .dma_mask = &_name##_id##_dma_mask, \ -+ .platform_data = &_name##_id##_data, \ -+ .coherent_dma_mask = DMA_32BIT_MASK, \ -+ }, \ -+ .resource = _name##_id##_resource, \ -+ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ -+} -+ -+#define select_peripheral(pin, periph, flags) \ -+ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags) -+ -+#define DEV_CLK(_name, devname, bus, _index) \ -+static struct clk devname##_##_name = { \ -+ .name = #_name, \ -+ .dev = &devname##_device.dev, \ -+ .parent = &bus##_clk, \ -+ .mode = bus##_clk_mode, \ -+ .get_rate = bus##_clk_get_rate, \ -+ .index = _index, \ -+} -+ -+static DEFINE_SPINLOCK(pm_lock); -+ -+unsigned long at32ap7000_osc_rates[3] = { -+ [0] = 32768, -+ /* FIXME: these are ATSTK1002-specific */ -+ [1] = 20000000, -+ [2] = 12000000, -+}; -+ -+static unsigned long osc_get_rate(struct clk *clk) -+{ -+ return at32ap7000_osc_rates[clk->index]; -+} -+ -+static unsigned long pll_get_rate(struct clk *clk, unsigned long control) -+{ -+ unsigned long div, mul, rate; -+ -+ if (!(control & PM_BIT(PLLEN))) -+ return 0; -+ -+ div = PM_BFEXT(PLLDIV, control) + 1; -+ mul = PM_BFEXT(PLLMUL, control) + 1; -+ -+ rate = clk->parent->get_rate(clk->parent); -+ rate = (rate + div / 2) / div; -+ rate *= mul; -+ -+ return rate; -+} -+ -+static unsigned long pll0_get_rate(struct clk *clk) -+{ -+ u32 control; -+ -+ control = pm_readl(PLL0); -+ -+ return pll_get_rate(clk, control); -+} -+ -+static unsigned long pll1_get_rate(struct clk *clk) -+{ -+ u32 control; -+ -+ control = pm_readl(PLL1); -+ -+ return pll_get_rate(clk, control); -+} -+ -+/* -+ * The AT32AP7000 has five primary clock sources: One 32kHz -+ * oscillator, two crystal oscillators and two PLLs. -+ */ -+static struct clk osc32k = { -+ .name = "osc32k", -+ .get_rate = osc_get_rate, -+ .users = 1, -+ .index = 0, -+}; -+static struct clk osc0 = { -+ .name = "osc0", -+ .get_rate = osc_get_rate, -+ .users = 1, -+ .index = 1, -+}; -+static struct clk osc1 = { -+ .name = "osc1", -+ .get_rate = osc_get_rate, -+ .index = 2, -+}; -+static struct clk pll0 = { -+ .name = "pll0", -+ .get_rate = pll0_get_rate, -+ .parent = &osc0, -+}; -+static struct clk pll1 = { -+ .name = "pll1", -+ .get_rate = pll1_get_rate, -+ .parent = &osc0, -+}; -+ -+/* -+ * The main clock can be either osc0 or pll0. The boot loader may -+ * have chosen one for us, so we don't really know which one until we -+ * have a look at the SM. -+ */ -+static struct clk *main_clock; -+ -+/* -+ * Synchronous clocks are generated from the main clock. The clocks -+ * must satisfy the constraint -+ * fCPU >= fHSB >= fPB -+ * i.e. each clock must not be faster than its parent. -+ */ -+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift) -+{ -+ return main_clock->get_rate(main_clock) >> shift; -+}; -+ -+static void cpu_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ mask = pm_readl(CPU_MASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(CPU_MASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long cpu_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(CPUDIV)) -+ shift = PM_BFEXT(CPUSEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply) -+{ -+ u32 control; -+ unsigned long parent_rate, child_div, actual_rate, div; -+ -+ parent_rate = clk->parent->get_rate(clk->parent); -+ control = pm_readl(CKSEL); -+ -+ if (control & PM_BIT(HSBDIV)) -+ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1); -+ else -+ child_div = 1; -+ -+ if (rate > 3 * (parent_rate / 4) || child_div == 1) { -+ actual_rate = parent_rate; -+ control &= ~PM_BIT(CPUDIV); -+ } else { -+ unsigned int cpusel; -+ div = (parent_rate + rate / 2) / rate; -+ if (div > child_div) -+ div = child_div; -+ cpusel = (div > 1) ? (fls(div) - 2) : 0; -+ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control); -+ actual_rate = parent_rate / (1 << (cpusel + 1)); -+ } -+ -+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n", -+ clk->name, rate, actual_rate); -+ -+ if (apply) -+ pm_writel(CKSEL, control); -+ -+ return actual_rate; -+} -+ -+static void hsb_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ mask = pm_readl(HSB_MASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(HSB_MASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long hsb_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(HSBDIV)) -+ shift = PM_BFEXT(HSBSEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static void pba_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ mask = pm_readl(PBA_MASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(PBA_MASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long pba_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(PBADIV)) -+ shift = PM_BFEXT(PBASEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static void pbb_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ mask = pm_readl(PBB_MASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(PBB_MASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long pbb_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(PBBDIV)) -+ shift = PM_BFEXT(PBBSEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static struct clk cpu_clk = { -+ .name = "cpu", -+ .get_rate = cpu_clk_get_rate, -+ .set_rate = cpu_clk_set_rate, -+ .users = 1, -+}; -+static struct clk hsb_clk = { -+ .name = "hsb", -+ .parent = &cpu_clk, -+ .get_rate = hsb_clk_get_rate, -+}; -+static struct clk pba_clk = { -+ .name = "pba", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = pba_clk_get_rate, -+ .index = 1, -+}; -+static struct clk pbb_clk = { -+ .name = "pbb", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .users = 1, -+ .index = 2, -+}; -+ -+/* -------------------------------------------------------------------- -+ * Generic Clock operations -+ * -------------------------------------------------------------------- */ -+ -+static void genclk_mode(struct clk *clk, int enabled) -+{ -+ u32 control; -+ -+ control = pm_readl(GCCTRL(clk->index)); -+ if (enabled) -+ control |= PM_BIT(CEN); -+ else -+ control &= ~PM_BIT(CEN); -+ pm_writel(GCCTRL(clk->index), control); -+} -+ -+static unsigned long genclk_get_rate(struct clk *clk) -+{ -+ u32 control; -+ unsigned long div = 1; -+ -+ control = pm_readl(GCCTRL(clk->index)); -+ if (control & PM_BIT(DIVEN)) -+ div = 2 * (PM_BFEXT(DIV, control) + 1); -+ -+ return clk->parent->get_rate(clk->parent) / div; -+} -+ -+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) -+{ -+ u32 control; -+ unsigned long parent_rate, actual_rate, div; -+ -+ parent_rate = clk->parent->get_rate(clk->parent); -+ control = pm_readl(GCCTRL(clk->index)); -+ -+ if (rate > 3 * parent_rate / 4) { -+ actual_rate = parent_rate; -+ control &= ~PM_BIT(DIVEN); -+ } else { -+ div = (parent_rate + rate) / (2 * rate) - 1; -+ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN); -+ actual_rate = parent_rate / (2 * (div + 1)); -+ } -+ -+ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n", -+ clk->name, rate, actual_rate); -+ -+ if (apply) -+ pm_writel(GCCTRL(clk->index), control); -+ -+ return actual_rate; -+} -+ -+int genclk_set_parent(struct clk *clk, struct clk *parent) -+{ -+ u32 control; -+ -+ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n", -+ clk->name, parent->name, clk->parent->name); -+ -+ control = pm_readl(GCCTRL(clk->index)); -+ -+ if (parent == &osc1 || parent == &pll1) -+ control |= PM_BIT(OSCSEL); -+ else if (parent == &osc0 || parent == &pll0) -+ control &= ~PM_BIT(OSCSEL); -+ else -+ return -EINVAL; -+ -+ if (parent == &pll0 || parent == &pll1) -+ control |= PM_BIT(PLLSEL); -+ else -+ control &= ~PM_BIT(PLLSEL); -+ -+ pm_writel(GCCTRL(clk->index), control); -+ clk->parent = parent; -+ -+ return 0; -+} -+ -+static void __init genclk_init_parent(struct clk *clk) -+{ -+ u32 control; -+ struct clk *parent; -+ -+ BUG_ON(clk->index > 7); -+ -+ control = pm_readl(GCCTRL(clk->index)); -+ if (control & PM_BIT(OSCSEL)) -+ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1; -+ else -+ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0; -+ -+ clk->parent = parent; -+} -+ -+/* -------------------------------------------------------------------- -+ * System peripherals -+ * -------------------------------------------------------------------- */ -+static struct resource at32_pm0_resource[] = { -+ { -+ .start = 0xfff00000, -+ .end = 0xfff0007f, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(20), -+}; -+ -+static struct resource at32ap700x_rtc0_resource[] = { -+ { -+ .start = 0xfff00080, -+ .end = 0xfff000af, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(21), -+}; -+ -+static struct resource at32_wdt0_resource[] = { -+ { -+ .start = 0xfff000b0, -+ .end = 0xfff000cf, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct resource at32_eic0_resource[] = { -+ { -+ .start = 0xfff00100, -+ .end = 0xfff0013f, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(19), -+}; -+ -+DEFINE_DEV(at32_pm, 0); -+DEFINE_DEV(at32ap700x_rtc, 0); -+DEFINE_DEV(at32_wdt, 0); -+DEFINE_DEV(at32_eic, 0); -+ -+/* -+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this -+ * is always running. -+ */ -+static struct clk at32_pm_pclk = { -+ .name = "pclk", -+ .dev = &at32_pm0_device.dev, -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .users = 1, -+ .index = 0, -+}; -+ -+static struct resource intc0_resource[] = { -+ PBMEM(0xfff00400), -+}; -+struct platform_device at32_intc0_device = { -+ .name = "intc", -+ .id = 0, -+ .resource = intc0_resource, -+ .num_resources = ARRAY_SIZE(intc0_resource), -+}; -+DEV_CLK(pclk, at32_intc0, pbb, 1); -+ -+static struct clk ebi_clk = { -+ .name = "ebi", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .users = 1, -+}; -+static struct clk hramc_clk = { -+ .name = "hramc", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .users = 1, -+ .index = 3, -+}; -+ -+static struct resource smc0_resource[] = { -+ PBMEM(0xfff03400), -+}; -+DEFINE_DEV(smc, 0); -+DEV_CLK(pclk, smc0, pbb, 13); -+DEV_CLK(mck, smc0, hsb, 0); -+ -+static struct platform_device pdc_device = { -+ .name = "pdc", -+ .id = 0, -+}; -+DEV_CLK(hclk, pdc, hsb, 4); -+DEV_CLK(pclk, pdc, pba, 16); -+ -+static struct clk pico_clk = { -+ .name = "pico", -+ .parent = &cpu_clk, -+ .mode = cpu_clk_mode, -+ .get_rate = cpu_clk_get_rate, -+ .users = 1, -+}; -+ -+static struct resource dmaca0_resource[] = { -+ { -+ .start = 0xff200000, -+ .end = 0xff20ffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(2), -+}; -+DEFINE_DEV(dmaca, 0); -+DEV_CLK(hclk, dmaca0, hsb, 10); -+ -+/* -------------------------------------------------------------------- -+ * HMATRIX -+ * -------------------------------------------------------------------- */ -+ -+static struct clk hmatrix_clk = { -+ .name = "hmatrix_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 2, -+ .users = 1, -+}; -+#define HMATRIX_BASE ((void __iomem *)0xfff00800) -+ -+#define hmatrix_readl(reg) \ -+ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg) -+#define hmatrix_writel(reg,value) \ -+ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg) -+ -+/* -+ * Set bits in the HMATRIX Special Function Register (SFR) used by the -+ * External Bus Interface (EBI). This can be used to enable special -+ * features like CompactFlash support, NAND Flash support, etc. on -+ * certain chipselects. -+ */ -+static inline void set_ebi_sfr_bits(u32 mask) -+{ -+ u32 sfr; -+ -+ clk_enable(&hmatrix_clk); -+ sfr = hmatrix_readl(SFR4); -+ sfr |= mask; -+ hmatrix_writel(SFR4, sfr); -+ clk_disable(&hmatrix_clk); -+} -+ -+/* -------------------------------------------------------------------- -+ * System Timer/Counter (TC) -+ * -------------------------------------------------------------------- */ -+static struct resource at32_systc0_resource[] = { -+ PBMEM(0xfff00c00), -+ IRQ(22), -+}; -+struct platform_device at32_systc0_device = { -+ .name = "systc", -+ .id = 0, -+ .resource = at32_systc0_resource, -+ .num_resources = ARRAY_SIZE(at32_systc0_resource), -+}; -+DEV_CLK(pclk, at32_systc0, pbb, 3); -+ -+/* -------------------------------------------------------------------- -+ * PIO -+ * -------------------------------------------------------------------- */ -+ -+static struct resource pio0_resource[] = { -+ PBMEM(0xffe02800), -+ IRQ(13), -+}; -+DEFINE_DEV(pio, 0); -+DEV_CLK(mck, pio0, pba, 10); -+ -+static struct resource pio1_resource[] = { -+ PBMEM(0xffe02c00), -+ IRQ(14), -+}; -+DEFINE_DEV(pio, 1); -+DEV_CLK(mck, pio1, pba, 11); -+ -+static struct resource pio2_resource[] = { -+ PBMEM(0xffe03000), -+ IRQ(15), -+}; -+DEFINE_DEV(pio, 2); -+DEV_CLK(mck, pio2, pba, 12); -+ -+static struct resource pio3_resource[] = { -+ PBMEM(0xffe03400), -+ IRQ(16), -+}; -+DEFINE_DEV(pio, 3); -+DEV_CLK(mck, pio3, pba, 13); -+ -+static struct resource pio4_resource[] = { -+ PBMEM(0xffe03800), -+ IRQ(17), -+}; -+DEFINE_DEV(pio, 4); -+DEV_CLK(mck, pio4, pba, 14); -+ -+void __init at32_add_system_devices(void) -+{ -+ platform_device_register(&at32_pm0_device); -+ platform_device_register(&at32_intc0_device); -+ platform_device_register(&at32ap700x_rtc0_device); -+ platform_device_register(&at32_wdt0_device); -+ platform_device_register(&at32_eic0_device); -+ platform_device_register(&smc0_device); -+ platform_device_register(&pdc_device); -+ platform_device_register(&dmaca0_device); -+ -+ platform_device_register(&at32_systc0_device); -+ -+ platform_device_register(&pio0_device); -+ platform_device_register(&pio1_device); -+ platform_device_register(&pio2_device); -+ platform_device_register(&pio3_device); -+ platform_device_register(&pio4_device); -+} -+ -+/* -------------------------------------------------------------------- -+ * USART -+ * -------------------------------------------------------------------- */ -+ -+static struct atmel_uart_data atmel_usart0_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+static struct resource atmel_usart0_resource[] = { -+ PBMEM(0xffe00c00), -+ IRQ(6), -+}; -+DEFINE_DEV_DATA(atmel_usart, 0); -+DEV_CLK(usart, atmel_usart0, pba, 3); -+ -+static struct atmel_uart_data atmel_usart1_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+static struct resource atmel_usart1_resource[] = { -+ PBMEM(0xffe01000), -+ IRQ(7), -+}; -+DEFINE_DEV_DATA(atmel_usart, 1); -+DEV_CLK(usart, atmel_usart1, pba, 4); -+ -+static struct atmel_uart_data atmel_usart2_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+static struct resource atmel_usart2_resource[] = { -+ PBMEM(0xffe01400), -+ IRQ(8), -+}; -+DEFINE_DEV_DATA(atmel_usart, 2); -+DEV_CLK(usart, atmel_usart2, pba, 5); -+ -+static struct atmel_uart_data atmel_usart3_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+static struct resource atmel_usart3_resource[] = { -+ PBMEM(0xffe01800), -+ IRQ(9), -+}; -+DEFINE_DEV_DATA(atmel_usart, 3); -+DEV_CLK(usart, atmel_usart3, pba, 6); -+ -+static inline void configure_usart0_pins(void) -+{ -+ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */ -+ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */ -+} -+ -+static inline void configure_usart1_pins(void) -+{ -+ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */ -+ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */ -+} -+ -+static inline void configure_usart2_pins(void) -+{ -+ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */ -+ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */ -+} -+ -+static inline void configure_usart3_pins(void) -+{ -+ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */ -+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */ -+} -+ -+static struct platform_device *__initdata at32_usarts[4]; -+ -+void __init at32_map_usart(unsigned int hw_id, unsigned int line) -+{ -+ struct platform_device *pdev; -+ -+ switch (hw_id) { -+ case 0: -+ pdev = &atmel_usart0_device; -+ configure_usart0_pins(); -+ break; -+ case 1: -+ pdev = &atmel_usart1_device; -+ configure_usart1_pins(); -+ break; -+ case 2: -+ pdev = &atmel_usart2_device; -+ configure_usart2_pins(); -+ break; -+ case 3: -+ pdev = &atmel_usart3_device; -+ configure_usart3_pins(); -+ break; -+ default: -+ return; -+ } -+ -+ if (PXSEG(pdev->resource[0].start) == P4SEG) { -+ /* Addresses in the P4 segment are permanently mapped 1:1 */ -+ struct atmel_uart_data *data = pdev->dev.platform_data; -+ data->regs = (void __iomem *)pdev->resource[0].start; -+ } -+ -+ pdev->id = line; -+ at32_usarts[line] = pdev; -+} -+ -+struct platform_device *__init at32_add_device_usart(unsigned int id) -+{ -+ platform_device_register(at32_usarts[id]); -+ return at32_usarts[id]; -+} -+ -+struct platform_device *atmel_default_console_device; -+ -+void __init at32_setup_serial_console(unsigned int usart_id) -+{ -+ atmel_default_console_device = at32_usarts[usart_id]; -+} -+ -+/* -------------------------------------------------------------------- -+ * Ethernet -+ * -------------------------------------------------------------------- */ -+ -+#ifdef CONFIG_CPU_AT32AP7000 -+static struct eth_platform_data macb0_data; -+static struct resource macb0_resource[] = { -+ PBMEM(0xfff01800), -+ IRQ(25), -+}; -+DEFINE_DEV_DATA(macb, 0); -+DEV_CLK(hclk, macb0, hsb, 8); -+DEV_CLK(pclk, macb0, pbb, 6); -+ -+static struct eth_platform_data macb1_data; -+static struct resource macb1_resource[] = { -+ PBMEM(0xfff01c00), -+ IRQ(26), -+}; -+DEFINE_DEV_DATA(macb, 1); -+DEV_CLK(hclk, macb1, hsb, 9); -+DEV_CLK(pclk, macb1, pbb, 7); -+ -+struct platform_device *__init -+at32_add_device_eth(unsigned int id, struct eth_platform_data *data) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: -+ pdev = &macb0_device; -+ -+ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */ -+ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */ -+ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */ -+ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */ -+ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */ -+ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */ -+ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */ -+ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */ -+ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */ -+ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */ -+ -+ if (!data->is_rmii) { -+ select_peripheral(PC(0), PERIPH_A, 0); /* COL */ -+ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */ -+ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */ -+ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */ -+ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */ -+ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */ -+ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */ -+ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */ -+ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */ -+ } -+ break; -+ -+ case 1: -+ pdev = &macb1_device; -+ -+ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */ -+ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */ -+ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */ -+ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */ -+ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */ -+ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */ -+ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */ -+ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */ -+ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */ -+ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */ -+ -+ if (!data->is_rmii) { -+ select_peripheral(PC(19), PERIPH_B, 0); /* COL */ -+ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */ -+ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */ -+ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */ -+ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */ -+ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */ -+ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */ -+ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */ -+ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */ -+ } -+ break; -+ -+ default: -+ return NULL; -+ } -+ -+ memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data)); -+ platform_device_register(pdev); -+ -+ return pdev; -+} -+#endif -+ -+/* -------------------------------------------------------------------- -+ * SPI -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_spi0_resource[] = { -+ PBMEM(0xffe00000), -+ IRQ(3), -+}; -+DEFINE_DEV(atmel_spi, 0); -+DEV_CLK(spi_clk, atmel_spi0, pba, 0); -+ -+static struct resource atmel_spi1_resource[] = { -+ PBMEM(0xffe00400), -+ IRQ(4), -+}; -+DEFINE_DEV(atmel_spi, 1); -+DEV_CLK(spi_clk, atmel_spi1, pba, 1); -+ -+static void __init -+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, -+ unsigned int n, const u8 *pins) -+{ -+ unsigned int pin, mode; -+ -+ for (; n; n--, b++) { -+ b->bus_num = bus_num; -+ if (b->chip_select >= 4) -+ continue; -+ pin = (unsigned)b->controller_data; -+ if (!pin) { -+ pin = pins[b->chip_select]; -+ b->controller_data = (void *)pin; -+ } -+ mode = AT32_GPIOF_OUTPUT; -+ if (!(b->mode & SPI_CS_HIGH)) -+ mode |= AT32_GPIOF_HIGH; -+ at32_select_gpio(pin, mode); -+ } -+} -+ -+struct platform_device *__init -+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) -+{ -+ /* -+ * Manage the chipselects as GPIOs, normally using the same pins -+ * the SPI controller expects; but boards can use other pins. -+ */ -+ static u8 __initdata spi0_pins[] = -+ { GPIO_PIN_PA(3), GPIO_PIN_PA(4), -+ GPIO_PIN_PA(5), GPIO_PIN_PA(20), }; -+ static u8 __initdata spi1_pins[] = -+ { GPIO_PIN_PB(2), GPIO_PIN_PB(3), -+ GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: -+ pdev = &atmel_spi0_device; -+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ -+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ -+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ -+ at32_spi_setup_slaves(0, b, n, spi0_pins); -+ break; -+ -+ case 1: -+ pdev = &atmel_spi1_device; -+ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ -+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ -+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ -+ at32_spi_setup_slaves(1, b, n, spi1_pins); -+ break; -+ -+ default: -+ return NULL; -+ } -+ -+ spi_register_board_info(b, n); -+ platform_device_register(pdev); -+ return pdev; -+} -+ -+/* -------------------------------------------------------------------- -+ * TWI -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_twi0_resource[] __initdata = { -+ PBMEM(0xffe00800), -+ IRQ(5), -+}; -+static struct clk atmel_twi0_pclk = { -+ .name = "twi_pclk", -+ .parent = &pba_clk, -+ .mode = pba_clk_mode, -+ .get_rate = pba_clk_get_rate, -+ .index = 2, -+}; -+ -+struct platform_device *__init at32_add_device_twi(unsigned int id) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_twi", id); -+ if (!pdev) -+ return NULL; -+ -+ if (platform_device_add_resources(pdev, atmel_twi0_resource, -+ ARRAY_SIZE(atmel_twi0_resource))) -+ goto err_add_resources; -+ -+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */ -+ select_peripheral(PA(7), PERIPH_A, 0); /* SDL */ -+ -+ atmel_twi0_pclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+err_add_resources: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * MMC -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_mci0_resource[] __initdata = { -+ PBMEM(0xfff02400), -+ IRQ(28), -+}; -+static struct clk atmel_mci0_pclk = { -+ .name = "mci_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 9, -+}; -+ -+struct platform_device *__init -+at32_add_device_mci(unsigned int id, struct mci_platform_data *data) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_mci", id); -+ if (!pdev) -+ goto fail; -+ -+ if (platform_device_add_resources(pdev, atmel_mci0_resource, -+ ARRAY_SIZE(atmel_mci0_resource))) -+ goto fail; -+ -+ if (data && platform_device_add_data(pdev, data, -+ sizeof(struct mci_platform_data))) -+ goto fail; -+ -+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ -+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ -+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ -+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ -+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ -+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ -+ -+ if (data) { -+ if (data->detect_pin != GPIO_PIN_NONE) -+ at32_select_gpio(data->detect_pin, 0); -+ if (data->wp_pin != GPIO_PIN_NONE) -+ at32_select_gpio(data->wp_pin, 0); -+ } -+ -+ atmel_mci0_pclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+fail: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * LCDC -+ * -------------------------------------------------------------------- */ -+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) -+static struct atmel_lcdfb_info atmel_lcdfb0_data; -+static struct resource atmel_lcdfb0_resource[] = { -+ { -+ .start = 0xff000000, -+ .end = 0xff000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(1), -+ { -+ /* Placeholder for pre-allocated fb memory */ -+ .start = 0x00000000, -+ .end = 0x00000000, -+ .flags = 0, -+ }, -+}; -+DEFINE_DEV_DATA(atmel_lcdfb, 0); -+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7); -+static struct clk atmel_lcdfb0_pixclk = { -+ .name = "lcdc_clk", -+ .dev = &atmel_lcdfb0_device.dev, -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 7, -+}; -+ -+struct platform_device *__init -+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, -+ unsigned long fbmem_start, unsigned long fbmem_len) -+{ -+ struct platform_device *pdev; -+ struct atmel_lcdfb_info *info; -+ struct fb_monspecs *monspecs; -+ struct fb_videomode *modedb; -+ unsigned int modedb_size; -+ -+ /* -+ * Do a deep copy of the fb data, monspecs and modedb. Make -+ * sure all allocations are done before setting up the -+ * portmux. -+ */ -+ monspecs = kmemdup(data->default_monspecs, -+ sizeof(struct fb_monspecs), GFP_KERNEL); -+ if (!monspecs) -+ return NULL; -+ -+ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len; -+ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL); -+ if (!modedb) -+ goto err_dup_modedb; -+ monspecs->modedb = modedb; -+ -+ switch (id) { -+ case 0: -+ pdev = &atmel_lcdfb0_device; -+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */ -+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ -+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ -+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ -+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ -+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ -+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ -+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ -+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ -+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ -+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ -+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ -+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ -+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ -+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ -+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ -+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ -+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ -+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ -+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ -+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ -+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ -+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ -+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ -+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ -+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ -+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ -+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ -+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ -+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ -+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ -+ -+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); -+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); -+ break; -+ -+ default: -+ goto err_invalid_id; -+ } -+ -+ if (fbmem_len) { -+ pdev->resource[2].start = fbmem_start; -+ pdev->resource[2].end = fbmem_start + fbmem_len - 1; -+ pdev->resource[2].flags = IORESOURCE_MEM; -+ } -+ -+ info = pdev->dev.platform_data; -+ memcpy(info, data, sizeof(struct atmel_lcdfb_info)); -+ info->default_monspecs = monspecs; -+ -+ platform_device_register(pdev); -+ return pdev; -+ -+err_invalid_id: -+ kfree(modedb); -+err_dup_modedb: -+ kfree(monspecs); -+ return NULL; -+} -+#endif -+ -+/* -------------------------------------------------------------------- -+ * PWM -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_pwm0_resource[] __initdata = { -+ PBMEM(0xfff01400), -+ IRQ(24), -+}; -+static struct clk atmel_pwm0_mck = { -+ .name = "mck", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 5, -+}; -+ -+struct platform_device *__init at32_add_device_pwm(u32 mask) -+{ -+ struct platform_device *pdev; -+ -+ if (!mask) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_pwm", 0); -+ if (!pdev) -+ return NULL; -+ -+ if (platform_device_add_resources(pdev, atmel_pwm0_resource, -+ ARRAY_SIZE(atmel_pwm0_resource))) -+ goto out_free_pdev; -+ -+ if (platform_device_add_data(pdev, &mask, sizeof(mask))) -+ goto out_free_pdev; -+ -+ if (mask & (1 << 0)) -+ select_peripheral(PA(28), PERIPH_A, 0); -+ if (mask & (1 << 1)) -+ select_peripheral(PA(29), PERIPH_A, 0); -+ if (mask & (1 << 2)) -+ select_peripheral(PA(21), PERIPH_B, 0); -+ if (mask & (1 << 3)) -+ select_peripheral(PA(22), PERIPH_B, 0); -+ -+ atmel_pwm0_mck.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ -+ return pdev; -+ -+out_free_pdev: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * SSC -+ * -------------------------------------------------------------------- */ -+static struct resource ssc0_resource[] = { -+ PBMEM(0xffe01c00), -+ IRQ(10), -+}; -+DEFINE_DEV(ssc, 0); -+DEV_CLK(pclk, ssc0, pba, 7); -+ -+static struct resource ssc1_resource[] = { -+ PBMEM(0xffe02000), -+ IRQ(11), -+}; -+DEFINE_DEV(ssc, 1); -+DEV_CLK(pclk, ssc1, pba, 8); -+ -+static struct resource ssc2_resource[] = { -+ PBMEM(0xffe02400), -+ IRQ(12), -+}; -+DEFINE_DEV(ssc, 2); -+DEV_CLK(pclk, ssc2, pba, 9); -+ -+struct platform_device *__init -+at32_add_device_ssc(unsigned int id, unsigned int flags) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: -+ pdev = &ssc0_device; -+ if (flags & ATMEL_SSC_RF) -+ select_peripheral(PA(21), PERIPH_A, 0); /* RF */ -+ if (flags & ATMEL_SSC_RK) -+ select_peripheral(PA(22), PERIPH_A, 0); /* RK */ -+ if (flags & ATMEL_SSC_TK) -+ select_peripheral(PA(23), PERIPH_A, 0); /* TK */ -+ if (flags & ATMEL_SSC_TF) -+ select_peripheral(PA(24), PERIPH_A, 0); /* TF */ -+ if (flags & ATMEL_SSC_TD) -+ select_peripheral(PA(25), PERIPH_A, 0); /* TD */ -+ if (flags & ATMEL_SSC_RD) -+ select_peripheral(PA(26), PERIPH_A, 0); /* RD */ -+ break; -+ case 1: -+ pdev = &ssc1_device; -+ if (flags & ATMEL_SSC_RF) -+ select_peripheral(PA(0), PERIPH_B, 0); /* RF */ -+ if (flags & ATMEL_SSC_RK) -+ select_peripheral(PA(1), PERIPH_B, 0); /* RK */ -+ if (flags & ATMEL_SSC_TK) -+ select_peripheral(PA(2), PERIPH_B, 0); /* TK */ -+ if (flags & ATMEL_SSC_TF) -+ select_peripheral(PA(3), PERIPH_B, 0); /* TF */ -+ if (flags & ATMEL_SSC_TD) -+ select_peripheral(PA(4), PERIPH_B, 0); /* TD */ -+ if (flags & ATMEL_SSC_RD) -+ select_peripheral(PA(5), PERIPH_B, 0); /* RD */ -+ break; -+ case 2: -+ pdev = &ssc2_device; -+ if (flags & ATMEL_SSC_TD) -+ select_peripheral(PB(13), PERIPH_A, 0); /* TD */ -+ if (flags & ATMEL_SSC_RD) -+ select_peripheral(PB(14), PERIPH_A, 0); /* RD */ -+ if (flags & ATMEL_SSC_TK) -+ select_peripheral(PB(15), PERIPH_A, 0); /* TK */ -+ if (flags & ATMEL_SSC_TF) -+ select_peripheral(PB(16), PERIPH_A, 0); /* TF */ -+ if (flags & ATMEL_SSC_RF) -+ select_peripheral(PB(17), PERIPH_A, 0); /* RF */ -+ if (flags & ATMEL_SSC_RK) -+ select_peripheral(PB(18), PERIPH_A, 0); /* RK */ -+ break; -+ default: -+ return NULL; -+ } -+ -+ platform_device_register(pdev); -+ return pdev; -+} -+ -+/* -------------------------------------------------------------------- -+ * USB Device Controller -+ * -------------------------------------------------------------------- */ -+static struct resource usba0_resource[] __initdata = { -+ { -+ .start = 0xff300000, -+ .end = 0xff3fffff, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = 0xfff03000, -+ .end = 0xfff033ff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(31), -+}; -+static struct clk usba0_pclk = { -+ .name = "pclk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 12, -+}; -+static struct clk usba0_hclk = { -+ .name = "hclk", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .index = 6, -+}; -+ -+struct platform_device *__init -+at32_add_device_usba(unsigned int id, struct usba_platform_data *data) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_usba_udc", 0); -+ if (!pdev) -+ return NULL; -+ -+ if (platform_device_add_resources(pdev, usba0_resource, -+ ARRAY_SIZE(usba0_resource))) -+ goto out_free_pdev; -+ -+ if (data) { -+ if (platform_device_add_data(pdev, data, sizeof(*data))) -+ goto out_free_pdev; -+ -+ if (data->vbus_pin != GPIO_PIN_NONE) -+ at32_select_gpio(data->vbus_pin, 0); -+ } -+ -+ usba0_pclk.dev = &pdev->dev; -+ usba0_hclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ -+ return pdev; -+ -+out_free_pdev: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * IDE / CompactFlash -+ * -------------------------------------------------------------------- */ -+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001) -+static struct resource at32_smc_cs4_resource[] __initdata = { -+ { -+ .start = 0x04000000, -+ .end = 0x07ffffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(~0UL), /* Magic IRQ will be overridden */ -+}; -+static struct resource at32_smc_cs5_resource[] __initdata = { -+ { -+ .start = 0x20000000, -+ .end = 0x23ffffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(~0UL), /* Magic IRQ will be overridden */ -+}; -+ -+static int __init at32_init_ide_or_cf(struct platform_device *pdev, -+ unsigned int cs, unsigned int extint) -+{ -+ static unsigned int extint_pin_map[4] __initdata = { -+ GPIO_PIN_PB(25), -+ GPIO_PIN_PB(26), -+ GPIO_PIN_PB(27), -+ GPIO_PIN_PB(28), -+ }; -+ static bool common_pins_initialized __initdata = false; -+ unsigned int extint_pin; -+ int ret; -+ -+ if (extint >= ARRAY_SIZE(extint_pin_map)) -+ return -EINVAL; -+ extint_pin = extint_pin_map[extint]; -+ -+ switch (cs) { -+ case 4: -+ ret = platform_device_add_resources(pdev, -+ at32_smc_cs4_resource, -+ ARRAY_SIZE(at32_smc_cs4_resource)); -+ if (ret) -+ return ret; -+ -+ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */ -+ set_ebi_sfr_bits(HMATRIX_BIT(CS4A)); -+ break; -+ case 5: -+ ret = platform_device_add_resources(pdev, -+ at32_smc_cs5_resource, -+ ARRAY_SIZE(at32_smc_cs5_resource)); -+ if (ret) -+ return ret; -+ -+ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */ -+ set_ebi_sfr_bits(HMATRIX_BIT(CS5A)); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (!common_pins_initialized) { -+ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */ -+ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */ -+ select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */ -+ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */ -+ common_pins_initialized = true; -+ } -+ -+ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH); -+ -+ pdev->resource[1].start = EIM_IRQ_BASE + extint; -+ pdev->resource[1].end = pdev->resource[1].start; -+ -+ return 0; -+} -+ -+struct platform_device *__init -+at32_add_device_ide(unsigned int id, unsigned int extint, -+ struct ide_platform_data *data) -+{ -+ struct platform_device *pdev; -+ -+ pdev = platform_device_alloc("at32_ide", id); -+ if (!pdev) -+ goto fail; -+ -+ if (platform_device_add_data(pdev, data, -+ sizeof(struct ide_platform_data))) -+ goto fail; -+ -+ if (at32_init_ide_or_cf(pdev, data->cs, extint)) -+ goto fail; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+fail: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+struct platform_device *__init -+at32_add_device_cf(unsigned int id, unsigned int extint, -+ struct cf_platform_data *data) -+{ -+ struct platform_device *pdev; -+ -+ pdev = platform_device_alloc("at32_cf", id); -+ if (!pdev) -+ goto fail; -+ -+ if (platform_device_add_data(pdev, data, -+ sizeof(struct cf_platform_data))) -+ goto fail; -+ -+ if (at32_init_ide_or_cf(pdev, data->cs, extint)) -+ goto fail; -+ -+ if (data->detect_pin != GPIO_PIN_NONE) -+ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH); -+ if (data->reset_pin != GPIO_PIN_NONE) -+ at32_select_gpio(data->reset_pin, 0); -+ if (data->vcc_pin != GPIO_PIN_NONE) -+ at32_select_gpio(data->vcc_pin, 0); -+ /* READY is used as extint, so we can't select it as gpio */ -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+fail: -+ platform_device_put(pdev); -+ return NULL; -+} -+#endif -+ -+/* -------------------------------------------------------------------- -+ * AC97C -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_ac97c0_resource[] __initdata = { -+ PBMEM(0xfff02800), -+ IRQ(29), -+}; -+static struct clk atmel_ac97c0_pclk = { -+ .name = "pclk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 10, -+}; -+ -+struct platform_device *__init at32_add_device_ac97c(unsigned int id) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_ac97c", id); -+ if (!pdev) -+ return NULL; -+ -+ if (platform_device_add_resources(pdev, atmel_ac97c0_resource, -+ ARRAY_SIZE(atmel_ac97c0_resource))) -+ goto err_add_resources; -+ -+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */ -+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */ -+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */ -+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */ -+ -+ atmel_ac97c0_pclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+err_add_resources: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * ABDAC -+ * -------------------------------------------------------------------- */ -+static struct resource abdac0_resource[] __initdata = { -+ PBMEM(0xfff02000), -+ IRQ(27), -+}; -+static struct clk abdac0_pclk = { -+ .name = "pclk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 8, -+}; -+static struct clk abdac0_sample_clk = { -+ .name = "sample_clk", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 6, -+}; -+ -+struct platform_device *__init at32_add_device_abdac(unsigned int id) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("abdac", id); -+ if (!pdev) -+ return NULL; -+ -+ if (platform_device_add_resources(pdev, abdac0_resource, -+ ARRAY_SIZE(abdac0_resource))) -+ goto err_add_resources; -+ -+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */ -+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */ -+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */ -+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */ -+ -+ abdac0_pclk.dev = &pdev->dev; -+ abdac0_sample_clk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+err_add_resources: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * GCLK -+ * -------------------------------------------------------------------- */ -+static struct clk gclk0 = { -+ .name = "gclk0", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 0, -+}; -+static struct clk gclk1 = { -+ .name = "gclk1", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 1, -+}; -+static struct clk gclk2 = { -+ .name = "gclk2", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 2, -+}; -+static struct clk gclk3 = { -+ .name = "gclk3", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 3, -+}; -+static struct clk gclk4 = { -+ .name = "gclk4", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 4, -+}; -+ -+struct clk *at32_clock_list[] = { -+ &osc32k, -+ &osc0, -+ &osc1, -+ &pll0, -+ &pll1, -+ &cpu_clk, -+ &hsb_clk, -+ &pba_clk, -+ &pbb_clk, -+ &at32_pm_pclk, -+ &at32_intc0_pclk, -+ &hmatrix_clk, -+ &ebi_clk, -+ &hramc_clk, -+ &smc0_pclk, -+ &smc0_mck, -+ &pdc_hclk, -+ &pdc_pclk, -+ &dmaca0_hclk, -+ &pico_clk, -+ &pio0_mck, -+ &pio1_mck, -+ &pio2_mck, -+ &pio3_mck, -+ &pio4_mck, -+ &at32_systc0_pclk, -+ &atmel_usart0_usart, -+ &atmel_usart1_usart, -+ &atmel_usart2_usart, -+ &atmel_usart3_usart, -+ &atmel_pwm0_mck, -+#if defined(CONFIG_CPU_AT32AP7000) -+ &macb0_hclk, -+ &macb0_pclk, -+ &macb1_hclk, -+ &macb1_pclk, -+#endif -+ &atmel_spi0_spi_clk, -+ &atmel_spi1_spi_clk, -+ &atmel_twi0_pclk, -+ &atmel_mci0_pclk, -+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) -+ &atmel_lcdfb0_hck1, -+ &atmel_lcdfb0_pixclk, -+#endif -+ &ssc0_pclk, -+ &ssc1_pclk, -+ &ssc2_pclk, -+ &usba0_hclk, -+ &usba0_pclk, -+ &atmel_ac97c0_pclk, -+ &abdac0_pclk, -+ &abdac0_sample_clk, -+ &gclk0, -+ &gclk1, -+ &gclk2, -+ &gclk3, -+ &gclk4, -+}; -+unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); -+ -+void __init at32_portmux_init(void) -+{ -+ at32_init_pio(&pio0_device); -+ at32_init_pio(&pio1_device); -+ at32_init_pio(&pio2_device); -+ at32_init_pio(&pio3_device); -+ at32_init_pio(&pio4_device); -+} -+ -+void __init at32_clock_init(void) -+{ -+ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; -+ int i; -+ -+ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) { -+ main_clock = &pll0; -+ cpu_clk.parent = &pll0; -+ } else { -+ main_clock = &osc0; -+ cpu_clk.parent = &osc0; -+ } -+ -+ if (pm_readl(PLL0) & PM_BIT(PLLOSC)) -+ pll0.parent = &osc1; -+ if (pm_readl(PLL1) & PM_BIT(PLLOSC)) -+ pll1.parent = &osc1; -+ -+ genclk_init_parent(&gclk0); -+ genclk_init_parent(&gclk1); -+ genclk_init_parent(&gclk2); -+ genclk_init_parent(&gclk3); -+ genclk_init_parent(&gclk4); -+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) -+ genclk_init_parent(&atmel_lcdfb0_pixclk); -+#endif -+ genclk_init_parent(&abdac0_sample_clk); -+ -+ /* -+ * Turn on all clocks that have at least one user already, and -+ * turn off everything else. We only do this for module -+ * clocks, and even though it isn't particularly pretty to -+ * check the address of the mode function, it should do the -+ * trick... -+ */ -+ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) { -+ struct clk *clk = at32_clock_list[i]; -+ -+ if (clk->users == 0) -+ continue; -+ -+ if (clk->mode == &cpu_clk_mode) -+ cpu_mask |= 1 << clk->index; -+ else if (clk->mode == &hsb_clk_mode) -+ hsb_mask |= 1 << clk->index; -+ else if (clk->mode == &pba_clk_mode) -+ pba_mask |= 1 << clk->index; -+ else if (clk->mode == &pbb_clk_mode) -+ pbb_mask |= 1 << clk->index; -+ } -+ -+ pm_writel(CPU_MASK, cpu_mask); -+ pm_writel(HSB_MASK, hsb_mask); -+ pm_writel(PBA_MASK, pba_mask); -+ pm_writel(PBB_MASK, pbb_mask); -+} -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/extint.c linux-avr32/arch/avr32/mach-at32ap/extint.c ---- linux-2.6.24/arch/avr32/mach-at32ap/extint.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/extint.c 2008-02-01 14:51:35.000000000 -0500 -@@ -26,16 +26,10 @@ - #define EIC_MODE 0x0014 - #define EIC_EDGE 0x0018 - #define EIC_LEVEL 0x001c --#define EIC_TEST 0x0020 - #define EIC_NMIC 0x0024 - --/* Bitfields in TEST */ --#define EIC_TESTEN_OFFSET 31 --#define EIC_TESTEN_SIZE 1 -- - /* Bitfields in NMIC */ --#define EIC_EN_OFFSET 0 --#define EIC_EN_SIZE 1 -+#define EIC_NMIC_ENABLE (1 << 0) - - /* Bit manipulation macros */ - #define EIC_BIT(name) \ -@@ -63,6 +57,9 @@ struct eic { - unsigned int first_irq; - }; - -+static struct eic *nmi_eic; -+static bool nmi_enabled; -+ - static void eic_ack_irq(unsigned int irq) - { - struct eic *eic = get_irq_chip_data(irq); -@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int - eic_writel(eic, EDGE, edge); - eic_writel(eic, LEVEL, level); - -- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) -+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { - flow_type |= IRQ_LEVEL; -+ __set_irq_handler_unlocked(irq, handle_level_irq); -+ } else -+ __set_irq_handler_unlocked(irq, handle_edge_irq); - desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); - desc->status |= flow_type; - } -@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = { - static void demux_eic_irq(unsigned int irq, struct irq_desc *desc) - { - struct eic *eic = desc->handler_data; -- struct irq_desc *ext_desc; - unsigned long status, pending; -- unsigned int i, ext_irq; -+ unsigned int i; - - status = eic_readl(eic, ISR); - pending = status & eic_readl(eic, IMR); -@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int i - i = fls(pending) - 1; - pending &= ~(1 << i); - -- ext_irq = i + eic->first_irq; -- ext_desc = irq_desc + ext_irq; -- if (ext_desc->status & IRQ_LEVEL) -- handle_level_irq(ext_irq, ext_desc); -- else -- handle_edge_irq(ext_irq, ext_desc); -+ generic_handle_irq(i + eic->first_irq); - } - } - -+int nmi_enable(void) -+{ -+ nmi_enabled = true; -+ -+ if (nmi_eic) -+ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE); -+ -+ return 0; -+} -+ -+void nmi_disable(void) -+{ -+ if (nmi_eic) -+ eic_writel(nmi_eic, NMIC, 0); -+ -+ nmi_enabled = false; -+} -+ - static int __init eic_probe(struct platform_device *pdev) - { - struct eic *eic; -@@ -214,14 +226,13 @@ static int __init eic_probe(struct platf - pattern = eic_readl(eic, MODE); - nr_irqs = fls(pattern); - -- /* Trigger on falling edge unless overridden by driver */ -- eic_writel(eic, MODE, 0UL); -+ /* Trigger on low level unless overridden by driver */ - eic_writel(eic, EDGE, 0UL); -+ eic_writel(eic, LEVEL, 0UL); - - eic->chip = &eic_chip; - - for (i = 0; i < nr_irqs; i++) { -- /* NOTE the handler we set here is ignored by the demux */ - set_irq_chip_and_handler(eic->first_irq + i, &eic_chip, - handle_level_irq); - set_irq_chip_data(eic->first_irq + i, eic); -@@ -230,6 +241,16 @@ static int __init eic_probe(struct platf - set_irq_chained_handler(int_irq, demux_eic_irq); - set_irq_data(int_irq, eic); - -+ if (pdev->id == 0) { -+ nmi_eic = eic; -+ if (nmi_enabled) -+ /* -+ * Someone tried to enable NMI before we were -+ * ready. Do it now. -+ */ -+ nmi_enable(); -+ } -+ - dev_info(&pdev->dev, - "External Interrupt Controller at 0x%p, IRQ %u\n", - eic->regs, int_irq); -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c ---- linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,573 @@ -+/* -+ * GPIO /dev and configfs interface -+ * -+ * Copyright (C) 2006-2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/kernel.h> -+#include <linux/configfs.h> -+#include <linux/cdev.h> -+#include <linux/device.h> -+#include <linux/fs.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/poll.h> -+#include <linux/uaccess.h> -+#include <linux/wait.h> -+ -+#include <asm/gpio.h> -+#include <asm/arch/portmux.h> -+ -+#define GPIO_DEV_MAX 8 -+ -+static struct class *gpio_dev_class; -+static dev_t gpio_devt; -+ -+struct gpio_item { -+ spinlock_t lock; -+ -+ int enabled; -+ int initialized; -+ int port; -+ u32 pin_mask; -+ u32 oe_mask; -+ -+ /* Pin state last time we read it (for blocking reads) */ -+ u32 pin_state; -+ int changed; -+ -+ wait_queue_head_t change_wq; -+ struct fasync_struct *async_queue; -+ -+ int id; -+ struct class_device *gpio_dev; -+ struct cdev char_dev; -+ struct config_item item; -+}; -+ -+struct gpio_attribute { -+ struct configfs_attribute attr; -+ ssize_t (*show)(struct gpio_item *, char *); -+ ssize_t (*store)(struct gpio_item *, const char *, size_t); -+}; -+ -+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id) -+{ -+ struct gpio_item *gpio = dev_id; -+ u32 old_state, new_state; -+ -+ old_state = gpio->pin_state; -+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask); -+ gpio->pin_state = new_state; -+ -+ if (new_state != old_state) { -+ gpio->changed = 1; -+ wake_up_interruptible(&gpio->change_wq); -+ -+ if (gpio->async_queue) -+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int gpio_dev_open(struct inode *inode, struct file *file) -+{ -+ struct gpio_item *gpio = container_of(inode->i_cdev, -+ struct gpio_item, -+ char_dev); -+ unsigned int irq; -+ unsigned int i; -+ int ret; -+ -+ nonseekable_open(inode, file); -+ config_item_get(&gpio->item); -+ file->private_data = gpio; -+ -+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port, -+ gpio->pin_mask); -+ gpio->changed = 1; -+ -+ for (i = 0; i < 32; i++) { -+ if (gpio->pin_mask & (1 << i)) { -+ irq = gpio_to_irq(32 * gpio->port + i); -+ ret = request_irq(irq, gpio_dev_interrupt, 0, -+ "gpio-dev", gpio); -+ if (ret) -+ goto err_irq; -+ } -+ } -+ -+ return 0; -+ -+err_irq: -+ while (i--) { -+ if (gpio->pin_mask & (1 << i)) { -+ irq = gpio_to_irq(32 * gpio->port + i); -+ free_irq(irq, gpio); -+ } -+ } -+ -+ config_item_put(&gpio->item); -+ -+ return ret; -+} -+ -+static int gpio_dev_fasync(int fd, struct file *file, int mode) -+{ -+ struct gpio_item *gpio = file->private_data; -+ -+ return fasync_helper(fd, file, mode, &gpio->async_queue); -+} -+ -+static int gpio_dev_release(struct inode *inode, struct file *file) -+{ -+ struct gpio_item *gpio = file->private_data; -+ unsigned int irq; -+ unsigned int i; -+ -+ gpio_dev_fasync(-1, file, 0); -+ -+ for (i = 0; i < 32; i++) { -+ if (gpio->pin_mask & (1 << i)) { -+ irq = gpio_to_irq(32 * gpio->port + i); -+ free_irq(irq, gpio); -+ } -+ } -+ -+ config_item_put(&gpio->item); -+ -+ return 0; -+} -+ -+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait) -+{ -+ struct gpio_item *gpio = file->private_data; -+ unsigned int mask = 0; -+ -+ poll_wait(file, &gpio->change_wq, wait); -+ if (gpio->changed) -+ mask |= POLLIN | POLLRDNORM; -+ -+ return mask; -+} -+ -+static ssize_t gpio_dev_read(struct file *file, char __user *buf, -+ size_t count, loff_t *offset) -+{ -+ struct gpio_item *gpio = file->private_data; -+ u32 value; -+ -+ spin_lock_irq(&gpio->lock); -+ while (!gpio->changed) { -+ spin_unlock_irq(&gpio->lock); -+ -+ if (file->f_flags & O_NONBLOCK) -+ return -EAGAIN; -+ -+ if (wait_event_interruptible(gpio->change_wq, gpio->changed)) -+ return -ERESTARTSYS; -+ -+ spin_lock_irq(&gpio->lock); -+ } -+ -+ gpio->changed = 0; -+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask); -+ -+ spin_unlock_irq(&gpio->lock); -+ -+ count = min(count, (size_t)4); -+ if (copy_to_user(buf, &value, count)) -+ return -EFAULT; -+ -+ return count; -+} -+ -+static ssize_t gpio_dev_write(struct file *file, const char __user *buf, -+ size_t count, loff_t *offset) -+{ -+ struct gpio_item *gpio = file->private_data; -+ u32 value = 0; -+ u32 mask = ~0UL; -+ -+ count = min(count, (size_t)4); -+ if (copy_from_user(&value, buf, count)) -+ return -EFAULT; -+ -+ /* Assuming big endian */ -+ mask <<= (4 - count) * 8; -+ mask &= gpio->pin_mask; -+ -+ at32_gpio_set_value_multiple(gpio->port, value, mask); -+ -+ return count; -+} -+ -+static struct file_operations gpio_dev_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .open = gpio_dev_open, -+ .release = gpio_dev_release, -+ .fasync = gpio_dev_fasync, -+ .poll = gpio_dev_poll, -+ .read = gpio_dev_read, -+ .write = gpio_dev_write, -+}; -+ -+static struct gpio_item *to_gpio_item(struct config_item *item) -+{ -+ return item ? container_of(item, struct gpio_item, item) : NULL; -+} -+ -+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page) -+{ -+ return sprintf(page, "%d\n", gpio->port); -+} -+ -+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio, -+ const char *page, size_t count) -+{ -+ unsigned long id; -+ char *p = (char *)page; -+ ssize_t ret = -EINVAL; -+ -+ id = simple_strtoul(p, &p, 0); -+ if (!p || (*p && (*p != '\n'))) -+ return -EINVAL; -+ -+ /* Switching PIO is not allowed when live... */ -+ spin_lock(&gpio->lock); -+ if (!gpio->enabled) { -+ ret = -ENXIO; -+ if (at32_gpio_port_is_valid(id)) { -+ gpio->port = id; -+ ret = count; -+ } -+ } -+ spin_unlock(&gpio->lock); -+ -+ return ret; -+} -+ -+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page) -+{ -+ return sprintf(page, "0x%08x\n", gpio->pin_mask); -+} -+ -+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio, -+ const char *page, size_t count) -+{ -+ u32 new_mask; -+ char *p = (char *)page; -+ ssize_t ret = -EINVAL; -+ -+ new_mask = simple_strtoul(p, &p, 0); -+ if (!p || (*p && (*p != '\n'))) -+ return -EINVAL; -+ -+ /* Can't update the pin mask while live. */ -+ spin_lock(&gpio->lock); -+ if (!gpio->enabled) { -+ gpio->oe_mask &= new_mask; -+ gpio->pin_mask = new_mask; -+ ret = count; -+ } -+ spin_unlock(&gpio->lock); -+ -+ return ret; -+} -+ -+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page) -+{ -+ return sprintf(page, "0x%08x\n", gpio->oe_mask); -+} -+ -+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio, -+ const char *page, size_t count) -+{ -+ u32 mask; -+ char *p = (char *)page; -+ ssize_t ret = -EINVAL; -+ -+ mask = simple_strtoul(p, &p, 0); -+ if (!p || (*p && (*p != '\n'))) -+ return -EINVAL; -+ -+ spin_lock(&gpio->lock); -+ if (!gpio->enabled) { -+ gpio->oe_mask = mask & gpio->pin_mask; -+ ret = count; -+ } -+ spin_unlock(&gpio->lock); -+ -+ return ret; -+} -+ -+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page) -+{ -+ return sprintf(page, "%d\n", gpio->enabled); -+} -+ -+static ssize_t gpio_store_enabled(struct gpio_item *gpio, -+ const char *page, size_t count) -+{ -+ char *p = (char *)page; -+ int enabled; -+ int ret; -+ -+ enabled = simple_strtoul(p, &p, 0); -+ if (!p || (*p && (*p != '\n'))) -+ return -EINVAL; -+ -+ /* make it a boolean value */ -+ enabled = !!enabled; -+ -+ if (gpio->enabled == enabled) -+ /* No change; do nothing. */ -+ return count; -+ -+ BUG_ON(gpio->id >= GPIO_DEV_MAX); -+ -+ if (!enabled) { -+ class_device_unregister(gpio->gpio_dev); -+ cdev_del(&gpio->char_dev); -+ at32_deselect_pins(gpio->port, gpio->pin_mask); -+ gpio->initialized = 0; -+ } else { -+ if (gpio->port < 0 || !gpio->pin_mask) -+ return -ENODEV; -+ } -+ -+ /* Disallow any updates to gpio_id or pin_mask */ -+ spin_lock(&gpio->lock); -+ gpio->enabled = enabled; -+ spin_unlock(&gpio->lock); -+ -+ if (!enabled) -+ return count; -+ -+ /* Now, try to allocate the pins */ -+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask); -+ if (ret) -+ goto err_alloc_pins; -+ -+ gpio->initialized = 1; -+ -+ cdev_init(&gpio->char_dev, &gpio_dev_fops); -+ gpio->char_dev.owner = THIS_MODULE; -+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1); -+ if (ret < 0) -+ goto err_cdev_add; -+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL, -+ MKDEV(MAJOR(gpio_devt), gpio->id), -+ NULL, -+ "gpio%d", gpio->id); -+ if (IS_ERR(gpio->gpio_dev)) { -+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id); -+ ret = PTR_ERR(gpio->gpio_dev); -+ goto err_class_dev; -+ } -+ -+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n", -+ gpio->id, gpio->port, gpio->pin_mask, -+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt)); -+ -+ return 0; -+ -+err_class_dev: -+ cdev_del(&gpio->char_dev); -+err_cdev_add: -+ at32_deselect_pins(gpio->port, gpio->pin_mask); -+ gpio->initialized = 0; -+err_alloc_pins: -+ spin_lock(&gpio->lock); -+ gpio->enabled = 0; -+ spin_unlock(&gpio->lock); -+ -+ return ret; -+} -+ -+static struct gpio_attribute gpio_item_attr_gpio_id = { -+ .attr = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "gpio_id", -+ .ca_mode = S_IRUGO | S_IWUSR, -+ }, -+ .show = gpio_show_gpio_id, -+ .store = gpio_store_gpio_id, -+}; -+static struct gpio_attribute gpio_item_attr_pin_mask = { -+ .attr = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "pin_mask", -+ .ca_mode = S_IRUGO | S_IWUSR, -+ }, -+ .show = gpio_show_pin_mask, -+ .store = gpio_store_pin_mask, -+}; -+static struct gpio_attribute gpio_item_attr_oe_mask = { -+ .attr = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "oe_mask", -+ .ca_mode = S_IRUGO | S_IWUSR, -+ }, -+ .show = gpio_show_oe_mask, -+ .store = gpio_store_oe_mask, -+}; -+static struct gpio_attribute gpio_item_attr_enabled = { -+ .attr = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "enabled", -+ .ca_mode = S_IRUGO | S_IWUSR, -+ }, -+ .show = gpio_show_enabled, -+ .store = gpio_store_enabled, -+}; -+ -+static struct configfs_attribute *gpio_item_attrs[] = { -+ &gpio_item_attr_gpio_id.attr, -+ &gpio_item_attr_pin_mask.attr, -+ &gpio_item_attr_oe_mask.attr, -+ &gpio_item_attr_enabled.attr, -+ NULL, -+}; -+ -+static ssize_t gpio_show_attr(struct config_item *item, -+ struct configfs_attribute *attr, -+ char *page) -+{ -+ struct gpio_item *gpio_item = to_gpio_item(item); -+ struct gpio_attribute *gpio_attr -+ = container_of(attr, struct gpio_attribute, attr); -+ ssize_t ret = 0; -+ -+ if (gpio_attr->show) -+ ret = gpio_attr->show(gpio_item, page); -+ return ret; -+} -+ -+static ssize_t gpio_store_attr(struct config_item *item, -+ struct configfs_attribute *attr, -+ const char *page, size_t count) -+{ -+ struct gpio_item *gpio_item = to_gpio_item(item); -+ struct gpio_attribute *gpio_attr -+ = container_of(attr, struct gpio_attribute, attr); -+ ssize_t ret = -EINVAL; -+ -+ if (gpio_attr->store) -+ ret = gpio_attr->store(gpio_item, page, count); -+ return ret; -+} -+ -+static void gpio_release(struct config_item *item) -+{ -+ kfree(to_gpio_item(item)); -+} -+ -+static struct configfs_item_operations gpio_item_ops = { -+ .release = gpio_release, -+ .show_attribute = gpio_show_attr, -+ .store_attribute = gpio_store_attr, -+}; -+ -+static struct config_item_type gpio_item_type = { -+ .ct_item_ops = &gpio_item_ops, -+ .ct_attrs = gpio_item_attrs, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct config_item *gpio_make_item(struct config_group *group, -+ const char *name) -+{ -+ static int next_id; -+ struct gpio_item *gpio; -+ -+ if (next_id >= GPIO_DEV_MAX) -+ return NULL; -+ -+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL); -+ if (!gpio) -+ return NULL; -+ -+ gpio->id = next_id++; -+ config_item_init_type_name(&gpio->item, name, &gpio_item_type); -+ spin_lock_init(&gpio->lock); -+ init_waitqueue_head(&gpio->change_wq); -+ -+ return &gpio->item; -+} -+ -+static void gpio_drop_item(struct config_group *group, -+ struct config_item *item) -+{ -+ struct gpio_item *gpio = to_gpio_item(item); -+ -+ spin_lock(&gpio->lock); -+ if (gpio->enabled) { -+ class_device_unregister(gpio->gpio_dev); -+ cdev_del(&gpio->char_dev); -+ } -+ -+ if (gpio->initialized) { -+ at32_deselect_pins(gpio->port, gpio->pin_mask); -+ gpio->initialized = 0; -+ gpio->enabled = 0; -+ } -+ spin_unlock(&gpio->lock); -+} -+ -+static struct configfs_group_operations gpio_group_ops = { -+ .make_item = gpio_make_item, -+ .drop_item = gpio_drop_item, -+}; -+ -+static struct config_item_type gpio_group_type = { -+ .ct_group_ops = &gpio_group_ops, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct configfs_subsystem gpio_subsys = { -+ .su_group = { -+ .cg_item = { -+ .ci_namebuf = "gpio", -+ .ci_type = &gpio_group_type, -+ }, -+ }, -+}; -+ -+static int __init gpio_dev_init(void) -+{ -+ int err; -+ -+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev"); -+ if (IS_ERR(gpio_dev_class)) { -+ err = PTR_ERR(gpio_dev_class); -+ goto err_class_create; -+ } -+ -+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio"); -+ if (err < 0) -+ goto err_alloc_chrdev; -+ -+ /* Configfs initialization */ -+ config_group_init(&gpio_subsys.su_group); -+ mutex_init(&gpio_subsys.su_mutex); -+ err = configfs_register_subsystem(&gpio_subsys); -+ if (err) -+ goto err_register_subsys; -+ -+ return 0; -+ -+err_register_subsys: -+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX); -+err_alloc_chrdev: -+ class_destroy(gpio_dev_class); -+err_class_create: -+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n"); -+ return err; -+} -+late_initcall(gpio_dev_init); -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Kconfig linux-avr32/arch/avr32/mach-at32ap/Kconfig ---- linux-2.6.24/arch/avr32/mach-at32ap/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/Kconfig 2008-02-01 14:51:35.000000000 -0500 -@@ -3,9 +3,9 @@ if PLATFORM_AT32AP - menu "Atmel AVR32 AP options" - - choice -- prompt "AT32AP7000 static memory bus width" -- depends on CPU_AT32AP7000 -- default AP7000_16_BIT_SMC -+ prompt "AT32AP700x static memory bus width" -+ depends on CPU_AT32AP700X -+ default AP700X_16_BIT_SMC - help - Define the width of the AP7000 external static memory interface. - This is used to determine how to mangle the address and/or data -@@ -15,17 +15,24 @@ choice - width for all chip selects, excluding the flash (which is using - raw access and is thus not affected by any of this.) - --config AP7000_32_BIT_SMC -+config AP700X_32_BIT_SMC - bool "32 bit" - --config AP7000_16_BIT_SMC -+config AP700X_16_BIT_SMC - bool "16 bit" - --config AP7000_8_BIT_SMC -+config AP700X_8_BIT_SMC - bool "8 bit" - - endchoice - -+config GPIO_DEV -+ bool "GPIO /dev interface" -+ select CONFIGFS_FS -+ default n -+ help -+ Say `Y' to enable a /dev interface to the GPIO pins. -+ - endmenu - - endif # PLATFORM_AT32AP -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Makefile linux-avr32/arch/avr32/mach-at32ap/Makefile ---- linux-2.6.24/arch/avr32/mach-at32ap/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/Makefile 2008-02-01 14:51:35.000000000 -0500 -@@ -1,4 +1,5 @@ - obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o --obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o --obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o -+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o -+obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o - obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o -+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o -diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/pio.c linux-avr32/arch/avr32/mach-at32ap/pio.c ---- linux-2.6.24/arch/avr32/mach-at32ap/pio.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mach-at32ap/pio.c 2008-02-01 14:51:35.000000000 -0500 -@@ -162,6 +162,82 @@ fail: - dump_stack(); - } - -+#ifdef CONFIG_GPIO_DEV -+ -+/* Gang allocators and accessors; used by the GPIO /dev driver */ -+int at32_gpio_port_is_valid(unsigned int port) -+{ -+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL; -+} -+ -+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask) -+{ -+ struct pio_device *pio; -+ u32 old, new; -+ -+ pio = &pio_dev[port]; -+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins)); -+ -+ /* Try to allocate the pins */ -+ do { -+ old = pio->pinmux_mask; -+ if (old & pins) -+ return -EBUSY; -+ -+ new = old | pins; -+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old); -+ -+ /* That went well, now configure the port */ -+ pio_writel(pio, OER, oe_mask); -+ pio_writel(pio, PER, pins); -+ -+ return 0; -+} -+ -+void at32_deselect_pins(unsigned int port, u32 pins) -+{ -+ struct pio_device *pio; -+ u32 old, new; -+ -+ pio = &pio_dev[port]; -+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs); -+ -+ /* Return to a "safe" mux configuration */ -+ pio_writel(pio, PUER, pins); -+ pio_writel(pio, ODR, pins); -+ -+ /* Deallocate the pins */ -+ do { -+ old = pio->pinmux_mask; -+ new = old & ~pins; -+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old); -+} -+ -+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins) -+{ -+ struct pio_device *pio; -+ -+ pio = &pio_dev[port]; -+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs); -+ -+ return pio_readl(pio, PDSR) & pins; -+} -+ -+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask) -+{ -+ struct pio_device *pio; -+ -+ pio = &pio_dev[port]; -+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs); -+ -+ /* No atomic updates for now... */ -+ pio_writel(pio, CODR, ~value & mask); -+ pio_writel(pio, SODR, value & mask); -+} -+ -+#endif /* CONFIG_GPIO_DEV */ -+ -+ - /*--------------------------------------------------------------------------*/ - - /* GPIO API */ -diff -Nrup linux-2.6.24/arch/avr32/Makefile linux-avr32/arch/avr32/Makefile ---- linux-2.6.24/arch/avr32/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/Makefile 2008-02-01 14:51:35.000000000 -0500 -@@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic - CFLAGS_MODULE += -mno-relax - LDFLAGS_vmlinux += --relax - --cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000 -+cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap - - KBUILD_CFLAGS += $(cpuflags-y) - KBUILD_AFLAGS += $(cpuflags-y) -@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/a - core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ - core-y += arch/avr32/kernel/ - core-y += arch/avr32/mm/ -+drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ -+drivers-y += arch/avr32/drivers/ - libs-y += arch/avr32/lib/ - - archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap -diff -Nrup linux-2.6.24/arch/avr32/mm/dma-coherent.c linux-avr32/arch/avr32/mm/dma-coherent.c ---- linux-2.6.24/arch/avr32/mm/dma-coherent.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mm/dma-coherent.c 2008-02-01 14:51:35.000000000 -0500 -@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct d - struct page *page, *free, *end; - int order; - -+ /* Following is a work-around (a.k.a. hack) to prevent pages -+ * with __GFP_COMP being passed to split_page() which cannot -+ * handle them. The real problem is that this flag probably -+ * should be 0 on AVR32 as it is not supported on this -+ * platform--see CONFIG_HUGETLB_PAGE. */ -+ gfp &= ~(__GFP_COMP); -+ - size = PAGE_ALIGN(size); - order = get_order(size); - -diff -Nrup linux-2.6.24/arch/avr32/mm/tlb.c linux-avr32/arch/avr32/mm/tlb.c ---- linux-2.6.24/arch/avr32/mm/tlb.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/arch/avr32/mm/tlb.c 2008-02-01 14:51:35.000000000 -0500 -@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb - return 0; - } - --static struct seq_operations tlb_ops = { -+static const struct seq_operations tlb_ops = { - .start = tlb_start, - .next = tlb_next, - .stop = tlb_stop, -diff -Nrup linux-2.6.24/arch/avr32/oprofile/Makefile linux-avr32/arch/avr32/oprofile/Makefile ---- linux-2.6.24/arch/avr32/oprofile/Makefile 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/oprofile/Makefile 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,8 @@ -+obj-$(CONFIG_OPROFILE) += oprofile.o -+ -+oprofile-y := $(addprefix ../../../drivers/oprofile/, \ -+ oprof.o cpu_buffer.o buffer_sync.o \ -+ event_buffer.o oprofile_files.o \ -+ oprofilefs.o oprofile_stats.o \ -+ timer_int.o) -+oprofile-y += op_model_avr32.o -diff -Nrup linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c linux-avr32/arch/avr32/oprofile/op_model_avr32.c ---- linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/arch/avr32/oprofile/op_model_avr32.c 2008-02-01 14:51:35.000000000 -0500 -@@ -0,0 +1,235 @@ -+/* -+ * AVR32 Performance Counter Driver -+ * -+ * Copyright (C) 2005-2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Author: Ronny Pedersen -+ */ -+#include <linux/errno.h> -+#include <linux/interrupt.h> -+#include <linux/irq.h> -+#include <linux/oprofile.h> -+#include <linux/sched.h> -+#include <linux/types.h> -+ -+#include <asm/intc.h> -+#include <asm/sysreg.h> -+#include <asm/system.h> -+ -+#define AVR32_PERFCTR_IRQ_GROUP 0 -+#define AVR32_PERFCTR_IRQ_LINE 1 -+ -+enum { PCCNT, PCNT0, PCNT1, NR_counter }; -+ -+struct avr32_perf_counter { -+ unsigned long enabled; -+ unsigned long event; -+ unsigned long count; -+ unsigned long unit_mask; -+ unsigned long kernel; -+ unsigned long user; -+ -+ u32 ie_mask; -+ u32 flag_mask; -+}; -+ -+static struct avr32_perf_counter counter[NR_counter] = { -+ { -+ .ie_mask = SYSREG_BIT(IEC), -+ .flag_mask = SYSREG_BIT(FC), -+ }, { -+ .ie_mask = SYSREG_BIT(IE0), -+ .flag_mask = SYSREG_BIT(F0), -+ }, { -+ .ie_mask = SYSREG_BIT(IE1), -+ .flag_mask = SYSREG_BIT(F1), -+ }, -+}; -+ -+static void avr32_perf_counter_reset(void) -+{ -+ /* Reset all counter and disable/clear all interrupts */ -+ sysreg_write(PCCR, (SYSREG_BIT(PCCR_R) -+ | SYSREG_BIT(PCCR_C) -+ | SYSREG_BIT(FC) -+ | SYSREG_BIT(F0) -+ | SYSREG_BIT(F1))); -+} -+ -+static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id) -+{ -+ struct avr32_perf_counter *ctr = dev_id; -+ struct pt_regs *regs; -+ u32 pccr; -+ -+ if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP) -+ & (1 << AVR32_PERFCTR_IRQ_LINE)))) -+ return IRQ_NONE; -+ -+ regs = get_irq_regs(); -+ pccr = sysreg_read(PCCR); -+ -+ /* Clear the interrupt flags we're about to handle */ -+ sysreg_write(PCCR, pccr); -+ -+ /* PCCNT */ -+ if (ctr->enabled && (pccr & ctr->flag_mask)) { -+ sysreg_write(PCCNT, -ctr->count); -+ oprofile_add_sample(regs, PCCNT); -+ } -+ ctr++; -+ /* PCNT0 */ -+ if (ctr->enabled && (pccr & ctr->flag_mask)) { -+ sysreg_write(PCNT0, -ctr->count); -+ oprofile_add_sample(regs, PCNT0); -+ } -+ ctr++; -+ /* PCNT1 */ -+ if (ctr->enabled && (pccr & ctr->flag_mask)) { -+ sysreg_write(PCNT1, -ctr->count); -+ oprofile_add_sample(regs, PCNT1); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int avr32_perf_counter_create_files(struct super_block *sb, -+ struct dentry *root) -+{ -+ struct dentry *dir; -+ unsigned int i; -+ char filename[4]; -+ -+ for (i = 0; i < NR_counter; i++) { -+ snprintf(filename, sizeof(filename), "%u", i); -+ dir = oprofilefs_mkdir(sb, root, filename); -+ -+ oprofilefs_create_ulong(sb, dir, "enabled", -+ &counter[i].enabled); -+ oprofilefs_create_ulong(sb, dir, "event", -+ &counter[i].event); -+ oprofilefs_create_ulong(sb, dir, "count", -+ &counter[i].count); -+ -+ /* Dummy entries */ -+ oprofilefs_create_ulong(sb, dir, "kernel", -+ &counter[i].kernel); -+ oprofilefs_create_ulong(sb, dir, "user", -+ &counter[i].user); -+ oprofilefs_create_ulong(sb, dir, "unit_mask", -+ &counter[i].unit_mask); -+ } -+ -+ return 0; -+} -+ -+static int avr32_perf_counter_setup(void) -+{ -+ struct avr32_perf_counter *ctr; -+ u32 pccr; -+ int ret; -+ int i; -+ -+ pr_debug("avr32_perf_counter_setup\n"); -+ -+ if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) { -+ printk(KERN_ERR -+ "oprofile: setup: perf counter already enabled\n"); -+ return -EBUSY; -+ } -+ -+ ret = request_irq(AVR32_PERFCTR_IRQ_GROUP, -+ avr32_perf_counter_interrupt, IRQF_SHARED, -+ "oprofile", counter); -+ if (ret) -+ return ret; -+ -+ avr32_perf_counter_reset(); -+ -+ pccr = 0; -+ for (i = PCCNT; i < NR_counter; i++) { -+ ctr = &counter[i]; -+ if (!ctr->enabled) -+ continue; -+ -+ pr_debug("enabling counter %d...\n", i); -+ -+ pccr |= ctr->ie_mask; -+ -+ switch (i) { -+ case PCCNT: -+ /* PCCNT always counts cycles, so no events */ -+ sysreg_write(PCCNT, -ctr->count); -+ break; -+ case PCNT0: -+ pccr |= SYSREG_BF(CONF0, ctr->event); -+ sysreg_write(PCNT0, -ctr->count); -+ break; -+ case PCNT1: -+ pccr |= SYSREG_BF(CONF1, ctr->event); -+ sysreg_write(PCNT1, -ctr->count); -+ break; -+ } -+ } -+ -+ pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr); -+ -+ sysreg_write(PCCR, pccr); -+ -+ return 0; -+} -+ -+static void avr32_perf_counter_shutdown(void) -+{ -+ pr_debug("avr32_perf_counter_shutdown\n"); -+ -+ avr32_perf_counter_reset(); -+ free_irq(AVR32_PERFCTR_IRQ_GROUP, counter); -+} -+ -+static int avr32_perf_counter_start(void) -+{ -+ pr_debug("avr32_perf_counter_start\n"); -+ -+ sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E)); -+ -+ return 0; -+} -+ -+static void avr32_perf_counter_stop(void) -+{ -+ pr_debug("avr32_perf_counter_stop\n"); -+ -+ sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E)); -+} -+ -+static struct oprofile_operations avr32_perf_counter_ops __initdata = { -+ .create_files = avr32_perf_counter_create_files, -+ .setup = avr32_perf_counter_setup, -+ .shutdown = avr32_perf_counter_shutdown, -+ .start = avr32_perf_counter_start, -+ .stop = avr32_perf_counter_stop, -+ .cpu_type = "avr32", -+}; -+ -+int __init oprofile_arch_init(struct oprofile_operations *ops) -+{ -+ if (!(current_cpu_data.features & AVR32_FEATURE_PCTR)) -+ return -ENODEV; -+ -+ memcpy(ops, &avr32_perf_counter_ops, -+ sizeof(struct oprofile_operations)); -+ -+ printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n"); -+ -+ return 0; -+} -+ -+void oprofile_arch_exit(void) -+{ -+ -+} -diff -Nrup linux-2.6.24/Documentation/kernel-parameters.txt linux-avr32/Documentation/kernel-parameters.txt ---- linux-2.6.24/Documentation/kernel-parameters.txt 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/Documentation/kernel-parameters.txt 2008-02-01 14:51:34.000000000 -0500 -@@ -34,6 +34,7 @@ parameter is applicable: - ALSA ALSA sound support is enabled. - APIC APIC support is enabled. - APM Advanced Power Management support is enabled. -+ AVR32 AVR32 architecture is enabled. - AX25 Appropriate AX.25 support is enabled. - BLACKFIN Blackfin architecture is enabled. - DRM Direct Rendering Management support is enabled. -@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters. - of returning the full 64-bit number. - The default is to return 64-bit inode numbers. - -+ nmi_debug= [KNL,AVR32] Specify one or more actions to take -+ when a NMI is triggered. -+ Format: [state][,regs][,debounce][,die] -+ - nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels - - no387 [BUGS=X86-32] Tells the kernel to use the 387 maths -diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c ---- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c 2008-02-01 14:51:37.000000000 -0500 -@@ -0,0 +1,436 @@ -+/* -+ * i2c Support for Atmel's Two-Wire Interface (TWI) -+ * -+ * Based on the work of Copyright (C) 2004 Rick Bronson -+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com> -+ * Ported to AVR32 and heavily modified by Espen Krangnes -+ * <ekrangnes at atmel.com> -+ * -+ * Copyright (C) 2006 Atmel Corporation -+ * -+ * Borrowed heavily from the original work by: -+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com> -+ * -+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz> -+ * bugs removed, interrupt routine markedly rewritten -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#undef VERBOSE_DEBUG -+ -+#include <linux/module.h> -+#include <linux/slab.h> -+#include <linux/i2c.h> -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/completion.h> -+#include <linux/io.h> -+ -+#include "i2c-atmeltwi.h" -+ -+static unsigned int baudrate = 100 * 1000; -+module_param(baudrate, uint, S_IRUGO); -+MODULE_PARM_DESC(baudrate, "The TWI baudrate"); -+ -+ -+struct atmel_twi { -+ void __iomem *regs; -+ struct i2c_adapter adapter; -+ struct clk *pclk; -+ struct completion comp; -+ u32 mask; -+ u8 *buf; -+ u16 len; -+ u16 acks_left; -+ int status; -+ unsigned int irq; -+ -+}; -+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter) -+ -+/* -+ * (Re)Initialize the TWI hardware registers. -+ */ -+static int twi_hwinit(struct atmel_twi *twi) -+{ -+ unsigned long cdiv, ckdiv = 0; -+ -+ /* REVISIT: wait till SCL is high before resetting; otherwise, -+ * some versions will wedge forever. -+ */ -+ -+ twi_writel(twi, IDR, ~0UL); -+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/ -+ twi_readl(twi, SR); -+ -+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4; -+ -+ while (cdiv > 255) { -+ ckdiv++; -+ cdiv = cdiv >> 1; -+ } -+ -+ /* REVISIT: there are various errata to consider re CDIV and CHDIV -+ * here, at least on at91 parts. -+ */ -+ -+ if (ckdiv > 7) -+ return -EINVAL; -+ else -+ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv) -+ | TWI_BF(CHDIV, cdiv) -+ | TWI_BF(CLDIV, cdiv)); -+ return 0; -+} -+ -+/* -+ * Waits for the i2c status register to set the specified bitmask -+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus -+ * limit, but I2C has no limit at all. -+ */ -+static int twi_complete(struct atmel_twi *twi, u32 mask) -+{ -+ int timeout = msecs_to_jiffies(100); -+ -+ mask |= TWI_BIT(TXCOMP); -+ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE); -+ init_completion(&twi->comp); -+ -+ twi_writel(twi, IER, mask); -+ -+ if (!wait_for_completion_timeout(&twi->comp, timeout)) { -+ /* RESET TWI interface */ -+ twi_writel(twi, CR, TWI_BIT(SWRST)); -+ -+ /* Reinitialize TWI */ -+ twi_hwinit(twi); -+ -+ return -ETIMEDOUT; -+ } -+ return 0; -+} -+ -+/* -+ * Generic i2c master transfer entrypoint. -+ */ -+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num) -+{ -+ struct atmel_twi *twi = to_atmel_twi(adap); -+ int i; -+ -+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num); -+ -+ twi->status = 0; -+ for (i = 0; i < num; i++, pmsg++) { -+ twi->len = pmsg->len; -+ twi->buf = pmsg->buf; -+ twi->acks_left = pmsg->len; -+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) | -+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0)); -+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr)); -+ -+ dev_dbg(&adap->dev, -+ "#%d: %s %d byte%s %s dev 0x%02x\n", -+ i, -+ pmsg->flags & I2C_M_RD ? "reading" : "writing", -+ pmsg->len, -+ pmsg->len > 1 ? "s" : "", -+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); -+ -+ /* enable */ -+ twi_writel(twi, CR, TWI_BIT(MSEN)); -+ -+ if (pmsg->flags & I2C_M_RD) { -+ /* cleanup after previous RX overruns */ -+ while (twi_readl(twi, SR) & TWI_BIT(RXRDY)) -+ twi_readl(twi, RHR); -+ -+ if (twi->len == 1) -+ twi_writel(twi, CR, -+ TWI_BIT(START) | TWI_BIT(STOP)); -+ else -+ twi_writel(twi, CR, TWI_BIT(START)); -+ -+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) { -+ dev_dbg(&adap->dev, "RX[%d] timeout. " -+ "Stopped with %d bytes left\n", -+ i, twi->acks_left); -+ return -ETIMEDOUT; -+ } -+ } else { -+ twi_writel(twi, THR, twi->buf[0]); -+ twi->acks_left--; -+ /* REVISIT: some chips don't start automagically: -+ * twi_writel(twi, CR, TWI_BIT(START)); -+ */ -+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) { -+ dev_dbg(&adap->dev, "TX[%d] timeout. " -+ "Stopped with %d bytes left\n", -+ i, twi->acks_left); -+ return -ETIMEDOUT; -+ } -+ /* REVISIT: an erratum workaround may be needed here; -+ * see sam9261 "STOP not generated" (START either). -+ */ -+ } -+ -+ /* Disable TWI interface */ -+ twi_writel(twi, CR, TWI_BIT(MSDIS)); -+ -+ if (twi->status) -+ return twi->status; -+ -+ /* WARNING: This driver lies about properly supporting -+ * repeated start, or it would *ALWAYS* return here. It -+ * has issued a STOP. Continuing is a false claim -- that -+ * a second (or third, etc.) message is part of the same -+ * "combined" (no STOPs between parts) message. -+ */ -+ -+ } /* end cur msg */ -+ -+ return i; -+} -+ -+ -+static irqreturn_t twi_interrupt(int irq, void *dev_id) -+{ -+ struct atmel_twi *twi = dev_id; -+ int status = twi_readl(twi, SR); -+ -+ /* Save state for later debug prints */ -+ int old_status = status; -+ -+ if (twi->mask & status) { -+ -+ status &= twi->mask; -+ -+ if (status & TWI_BIT(RXRDY)) { -+ if ((status & TWI_BIT(OVRE)) && twi->acks_left) { -+ /* Note weakness in fault reporting model: -+ * we can't say "the first N of these data -+ * bytes are valid". -+ */ -+ dev_err(&twi->adapter.dev, -+ "OVERRUN RX! %04x, lost %d\n", -+ old_status, twi->acks_left); -+ twi->acks_left = 0; -+ twi_writel(twi, CR, TWI_BIT(STOP)); -+ twi->status = -EOVERFLOW; -+ } else if (twi->acks_left > 0) { -+ twi->buf[twi->len - twi->acks_left] = -+ twi_readl(twi, RHR); -+ twi->acks_left--; -+ } -+ if (status & TWI_BIT(TXCOMP)) -+ goto done; -+ if (twi->acks_left == 1) -+ twi_writel(twi, CR, TWI_BIT(STOP)); -+ -+ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) { -+ goto done; -+ -+ } else if (status & TWI_BIT(TXRDY)) { -+ if (twi->acks_left > 0) { -+ twi->acks_left--; -+ twi_writel(twi, THR, -+ twi->buf[twi->len - twi->acks_left]); -+ } else -+ twi_writel(twi, CR, TWI_BIT(STOP)); -+ } -+ -+ if (twi->acks_left == 0) -+ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP)); -+ } -+ -+ /* enabling this message helps trigger overruns/underruns ... */ -+ dev_vdbg(&twi->adapter.dev, -+ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n", -+ old_status, -+ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP), -+ twi->acks_left); -+ -+ return IRQ_HANDLED; -+ -+done: -+ /* Note weak fault reporting model: we can't report how many -+ * bytes we sent before the NAK, or let upper layers choose -+ * whether to continue. The I2C stack doesn't allow that... -+ */ -+ if (status & TWI_BIT(NACK)) { -+ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n", -+ twi->acks_left); -+ twi->status = -EPIPE; -+ -+ /* TX underrun morphs automagically into a premature STOP; -+ * we'll probably observe UVRE even when it's not documented. -+ */ -+ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) { -+ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n", -+ old_status, twi->acks_left); -+ twi->status = -ENOSR; -+ } -+ -+ twi_writel(twi, IDR, ~0UL); -+ complete(&twi->comp); -+ -+ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n", -+ old_status, twi->acks_left, twi->status); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+/* -+ * Return list of supported functionality. -+ * -+ * NOTE: see warning above about repeated starts; this driver is falsely -+ * claiming to support "combined" transfers. The mid-message STOPs mean -+ * some slaves will never work with this driver. (Use i2c-gpio...) -+ */ -+static u32 twi_func(struct i2c_adapter *adapter) -+{ -+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL) -+ & ~I2C_FUNC_SMBUS_QUICK; -+} -+ -+static struct i2c_algorithm twi_algorithm = { -+ .master_xfer = twi_xfer, -+ .functionality = twi_func, -+}; -+ -+/* -+ * Main initialization routine. -+ */ -+static int __init twi_probe(struct platform_device *pdev) -+{ -+ struct atmel_twi *twi; -+ struct resource *regs; -+ struct clk *pclk; -+ struct i2c_adapter *adapter; -+ int rc, irq; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) -+ return -ENXIO; -+ -+ pclk = clk_get(&pdev->dev, "twi_pclk"); -+ if (IS_ERR(pclk)) -+ return PTR_ERR(pclk); -+ clk_enable(pclk); -+ -+ rc = -ENOMEM; -+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL); -+ if (!twi) { -+ dev_dbg(&pdev->dev, "can't allocate interface!\n"); -+ goto err_alloc_twi; -+ } -+ -+ twi->pclk = pclk; -+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!twi->regs) -+ goto err_ioremap; -+ -+ irq = platform_get_irq(pdev, 0); -+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi); -+ if (rc) { -+ dev_dbg(&pdev->dev, "can't bind irq!\n"); -+ goto err_irq; -+ } -+ twi->irq = irq; -+ -+ rc = twi_hwinit(twi); -+ if (rc) { -+ dev_err(&pdev->dev, "Unable to set baudrate\n"); -+ goto err_hw_init; -+ } -+ -+ adapter = &twi->adapter; -+ sprintf(adapter->name, "TWI"); -+ adapter->algo = &twi_algorithm; -+ adapter->class = I2C_CLASS_ALL; -+ adapter->nr = pdev->id; -+ adapter->dev.parent = &pdev->dev; -+ -+ platform_set_drvdata(pdev, twi); -+ -+ rc = i2c_add_numbered_adapter(adapter); -+ if (rc) { -+ dev_dbg(&pdev->dev, "Adapter %s registration failed\n", -+ adapter->name); -+ goto err_register; -+ } -+ -+ dev_info(&pdev->dev, -+ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n", -+ baudrate/1000, (unsigned long)regs->start); -+ -+ return 0; -+ -+ -+err_register: -+ platform_set_drvdata(pdev, NULL); -+ -+err_hw_init: -+ free_irq(irq, twi); -+ -+err_irq: -+ iounmap(twi->regs); -+ -+err_ioremap: -+ kfree(twi); -+ -+err_alloc_twi: -+ clk_disable(pclk); -+ clk_put(pclk); -+ -+ return rc; -+} -+ -+static int __exit twi_remove(struct platform_device *pdev) -+{ -+ struct atmel_twi *twi = platform_get_drvdata(pdev); -+ int res; -+ -+ platform_set_drvdata(pdev, NULL); -+ res = i2c_del_adapter(&twi->adapter); -+ twi_writel(twi, CR, TWI_BIT(MSDIS)); -+ iounmap(twi->regs); -+ clk_disable(twi->pclk); -+ clk_put(twi->pclk); -+ free_irq(twi->irq, twi); -+ kfree(twi); -+ -+ return res; -+} -+ -+static struct platform_driver twi_driver = { -+ .remove = __exit_p(twi_remove), -+ .driver = { -+ .name = "atmel_twi", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init atmel_twi_init(void) -+{ -+ return platform_driver_probe(&twi_driver, twi_probe); -+} -+ -+static void __exit atmel_twi_exit(void) -+{ -+ platform_driver_unregister(&twi_driver); -+} -+ -+module_init(atmel_twi_init); -+module_exit(atmel_twi_exit); -+ -+MODULE_AUTHOR("Espen Krangnes"); -+MODULE_DESCRIPTION("I2C driver for Atmel TWI"); -+MODULE_LICENSE("GPL"); -diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h ---- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h 2008-02-01 14:51:37.000000000 -0500 -@@ -0,0 +1,117 @@ -+/* -+ * Register definitions for the Atmel Two-Wire Interface -+ */ -+ -+#ifndef __ATMELTWI_H__ -+#define __ATMELTWI_H__ -+ -+/* TWI register offsets */ -+#define TWI_CR 0x0000 -+#define TWI_MMR 0x0004 -+#define TWI_SMR 0x0008 -+#define TWI_IADR 0x000c -+#define TWI_CWGR 0x0010 -+#define TWI_SR 0x0020 -+#define TWI_IER 0x0024 -+#define TWI_IDR 0x0028 -+#define TWI_IMR 0x002c -+#define TWI_RHR 0x0030 -+#define TWI_THR 0x0034 -+ -+/* Bitfields in CR */ -+#define TWI_START_OFFSET 0 -+#define TWI_START_SIZE 1 -+#define TWI_STOP_OFFSET 1 -+#define TWI_STOP_SIZE 1 -+#define TWI_MSEN_OFFSET 2 -+#define TWI_MSEN_SIZE 1 -+#define TWI_MSDIS_OFFSET 3 -+#define TWI_MSDIS_SIZE 1 -+#define TWI_SVEN_OFFSET 4 -+#define TWI_SVEN_SIZE 1 -+#define TWI_SVDIS_OFFSET 5 -+#define TWI_SVDIS_SIZE 1 -+#define TWI_SWRST_OFFSET 7 -+#define TWI_SWRST_SIZE 1 -+ -+/* Bitfields in MMR */ -+#define TWI_IADRSZ_OFFSET 8 -+#define TWI_IADRSZ_SIZE 2 -+#define TWI_MREAD_OFFSET 12 -+#define TWI_MREAD_SIZE 1 -+#define TWI_DADR_OFFSET 16 -+#define TWI_DADR_SIZE 7 -+ -+/* Bitfields in SMR */ -+#define TWI_SADR_OFFSET 16 -+#define TWI_SADR_SIZE 7 -+ -+/* Bitfields in IADR */ -+#define TWI_IADR_OFFSET 0 -+#define TWI_IADR_SIZE 24 -+ -+/* Bitfields in CWGR */ -+#define TWI_CLDIV_OFFSET 0 -+#define TWI_CLDIV_SIZE 8 -+#define TWI_CHDIV_OFFSET 8 -+#define TWI_CHDIV_SIZE 8 -+#define TWI_CKDIV_OFFSET 16 -+#define TWI_CKDIV_SIZE 3 -+ -+/* Bitfields in SR */ -+#define TWI_TXCOMP_OFFSET 0 -+#define TWI_TXCOMP_SIZE 1 -+#define TWI_RXRDY_OFFSET 1 -+#define TWI_RXRDY_SIZE 1 -+#define TWI_TXRDY_OFFSET 2 -+#define TWI_TXRDY_SIZE 1 -+#define TWI_SVDIR_OFFSET 3 -+#define TWI_SVDIR_SIZE 1 -+#define TWI_SVACC_OFFSET 4 -+#define TWI_SVACC_SIZE 1 -+#define TWI_GCACC_OFFSET 5 -+#define TWI_GCACC_SIZE 1 -+#define TWI_OVRE_OFFSET 6 -+#define TWI_OVRE_SIZE 1 -+#define TWI_UNRE_OFFSET 7 -+#define TWI_UNRE_SIZE 1 -+#define TWI_NACK_OFFSET 8 -+#define TWI_NACK_SIZE 1 -+#define TWI_ARBLST_OFFSET 9 -+#define TWI_ARBLST_SIZE 1 -+ -+/* Bitfields in RHR */ -+#define TWI_RXDATA_OFFSET 0 -+#define TWI_RXDATA_SIZE 8 -+ -+/* Bitfields in THR */ -+#define TWI_TXDATA_OFFSET 0 -+#define TWI_TXDATA_SIZE 8 -+ -+/* Constants for IADRSZ */ -+#define TWI_IADRSZ_NO_ADDR 0 -+#define TWI_IADRSZ_ONE_BYTE 1 -+#define TWI_IADRSZ_TWO_BYTES 2 -+#define TWI_IADRSZ_THREE_BYTES 3 -+ -+/* Bit manipulation macros */ -+#define TWI_BIT(name) \ -+ (1 << TWI_##name##_OFFSET) -+#define TWI_BF(name, value) \ -+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \ -+ << TWI_##name##_OFFSET) -+#define TWI_BFEXT(name, value) \ -+ (((value) >> TWI_##name##_OFFSET) \ -+ & ((1 << TWI_##name##_SIZE) - 1)) -+#define TWI_BFINS(name, value, old) \ -+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \ -+ << TWI_##name##_OFFSET)) \ -+ | TWI_BF(name, (value))) -+ -+/* Register access macros */ -+#define twi_readl(port, reg) \ -+ __raw_readl((port)->regs + TWI_##reg) -+#define twi_writel(port, reg, value) \ -+ __raw_writel((value), (port)->regs + TWI_##reg) -+ -+#endif /* __ATMELTWI_H__ */ -diff -Nrup linux-2.6.24/drivers/i2c/busses/Kconfig linux-avr32/drivers/i2c/busses/Kconfig ---- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/i2c/busses/Kconfig 2008-02-01 14:51:37.000000000 -0500 -@@ -88,6 +88,14 @@ config I2C_AT91 - to support combined I2C messages. Use the i2c-gpio driver - unless your system can cope with those limitations. - -+config I2C_ATMELTWI -+ tristate "Atmel Two-Wire Interface (TWI)" -+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP) -+ help -+ Atmel on-chip TWI controller. Say Y if you have an AT32 or -+ AT91-based device and want to use its built-in TWI -+ functionality. -+ - config I2C_AU1550 - tristate "Au1550/Au1200 SMBus interface" - depends on SOC_AU1550 || SOC_AU1200 -diff -Nrup linux-2.6.24/drivers/i2c/busses/Makefile linux-avr32/drivers/i2c/busses/Makefile ---- linux-2.6.24/drivers/i2c/busses/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/i2c/busses/Makefile 2008-02-01 14:51:37.000000000 -0500 -@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o - obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o - obj-$(CONFIG_SCx200_ACB) += scx200_acb.o - obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o -+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o - - ifeq ($(CONFIG_I2C_DEBUG_BUS),y) - EXTRA_CFLAGS += -DDEBUG -diff -Nrup linux-2.6.24/drivers/leds/Kconfig linux-avr32/drivers/leds/Kconfig ---- linux-2.6.24/drivers/leds/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/leds/Kconfig 2008-02-01 14:51:38.000000000 -0500 -@@ -18,6 +18,13 @@ config LEDS_CLASS - - comment "LED drivers" - -+config LEDS_ATMEL_PWM -+ tristate "LED Support using Atmel PWM outputs" -+ depends on LEDS_CLASS && ATMEL_PWM -+ help -+ This option enables support for LEDs driven using outputs -+ of the dedicated PWM controller found on newer Atmel SOCs. -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends on LEDS_CLASS && PXA_SHARP_C7xx -diff -Nrup linux-2.6.24/drivers/leds/leds-atmel-pwm.c linux-avr32/drivers/leds/leds-atmel-pwm.c ---- linux-2.6.24/drivers/leds/leds-atmel-pwm.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/leds/leds-atmel-pwm.c 2008-02-01 14:51:38.000000000 -0500 -@@ -0,0 +1,157 @@ -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <linux/io.h> -+#include <linux/atmel_pwm.h> -+ -+ -+struct pwmled { -+ struct led_classdev cdev; -+ struct pwm_channel pwmc; -+ struct gpio_led *desc; -+ u32 mult; -+ u8 active_low; -+}; -+ -+ -+/* -+ * For simplicity, we use "brightness" as if it were a linear function -+ * of PWM duty cycle. However, a logarithmic function of duty cycle is -+ * probably a better match for perceived brightness: two is half as bright -+ * as four, four is half as bright as eight, etc -+ */ -+static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b) -+{ -+ struct pwmled *led; -+ -+ /* update the duty cycle for the *next* period */ -+ led = container_of(cdev, struct pwmled, cdev); -+ pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b); -+} -+ -+/* -+ * NOTE: we reuse the platform_data structure of GPIO leds, -+ * but repurpose its "gpio" number as a PWM channel number. -+ */ -+static int __init pwmled_probe(struct platform_device *pdev) -+{ -+ const struct gpio_led_platform_data *pdata; -+ struct pwmled *leds; -+ unsigned i; -+ int status; -+ -+ pdata = pdev->dev.platform_data; -+ if (!pdata || pdata->num_leds < 1) -+ return -ENODEV; -+ -+ leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL); -+ if (!leds) -+ return -ENOMEM; -+ -+ for (i = 0; i < pdata->num_leds; i++) { -+ struct pwmled *led = leds + i; -+ const struct gpio_led *dat = pdata->leds + i; -+ u32 tmp; -+ -+ led->cdev.name = dat->name; -+ led->cdev.brightness = LED_OFF; -+ led->cdev.brightness_set = pwmled_brightness; -+ led->cdev.default_trigger = dat->default_trigger; -+ -+ led->active_low = dat->active_low; -+ -+ status = pwm_channel_alloc(dat->gpio, &led->pwmc); -+ if (status < 0) -+ goto err; -+ -+ /* -+ * Prescale clock by 2^x, so PWM counts in low MHz. -+ * Start each cycle with the LED active, so increasing -+ * the duty cycle gives us more time on (== brighter). -+ */ -+ tmp = 5; -+ if (!led->active_low) -+ tmp |= PWM_CPR_CPOL; -+ pwm_channel_writel(&led->pwmc, PWM_CMR, tmp); -+ -+ /* -+ * Pick a period so PWM cycles at 100+ Hz; and a multiplier -+ * for scaling duty cycle: brightness * mult. -+ */ -+ tmp = (led->pwmc.mck / (1 << 5)) / 100; -+ tmp /= 255; -+ led->mult = tmp; -+ pwm_channel_writel(&led->pwmc, PWM_CDTY, -+ led->cdev.brightness * 255); -+ pwm_channel_writel(&led->pwmc, PWM_CPRD, -+ LED_FULL * tmp); -+ -+ pwm_channel_enable(&led->pwmc); -+ -+ /* Hand it over to the LED framework */ -+ status = led_classdev_register(&pdev->dev, &led->cdev); -+ if (status < 0) { -+ pwm_channel_free(&led->pwmc); -+ goto err; -+ } -+ } -+ -+ platform_set_drvdata(pdev, leds); -+ return 0; -+ -+err: -+ if (i > 0) { -+ for (i = i - 1; i >= 0; i--) { -+ led_classdev_unregister(&leds[i].cdev); -+ pwm_channel_free(&leds[i].pwmc); -+ } -+ } -+ kfree(leds); -+ -+ return status; -+} -+ -+static int __exit pwmled_remove(struct platform_device *pdev) -+{ -+ const struct gpio_led_platform_data *pdata; -+ struct pwmled *leds; -+ unsigned i; -+ -+ pdata = pdev->dev.platform_data; -+ leds = platform_get_drvdata(pdev); -+ -+ for (i = 0; i < pdata->num_leds; i++) { -+ struct pwmled *led = leds + i; -+ -+ led_classdev_unregister(&led->cdev); -+ pwm_channel_free(&led->pwmc); -+ } -+ -+ kfree(leds); -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver pwmled_driver = { -+ .driver = { -+ .name = "leds-atmel-pwm", -+ .owner = THIS_MODULE, -+ }, -+ /* REVISIT add suspend() and resume() methods */ -+ .remove = __exit_p(pwmled_remove), -+}; -+ -+static int __init modinit(void) -+{ -+ return platform_driver_probe(&pwmled_driver, pwmled_probe); -+} -+module_init(modinit); -+ -+static void __exit modexit(void) -+{ -+ platform_driver_unregister(&pwmled_driver); -+} -+module_exit(modexit); -+ -+MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness"); -+MODULE_LICENSE("GPL"); -diff -Nrup linux-2.6.24/drivers/leds/Makefile linux-avr32/drivers/leds/Makefile ---- linux-2.6.24/drivers/leds/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/leds/Makefile 2008-02-01 14:51:38.000000000 -0500 -@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o -diff -Nrup linux-2.6.24/drivers/misc/atmel_pwm.c linux-avr32/drivers/misc/atmel_pwm.c ---- linux-2.6.24/drivers/misc/atmel_pwm.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/misc/atmel_pwm.c 2008-02-01 14:51:39.000000000 -0500 -@@ -0,0 +1,409 @@ -+#include <linux/module.h> -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/atmel_pwm.h> -+ -+ -+/* -+ * This is a simple driver for the PWM controller found in various newer -+ * Atmel SOCs, including the AVR32 series and the AT91sam9263. -+ * -+ * Chips with current Linux ports have only 4 PWM channels, out of max 32. -+ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux). -+ * Docs are inconsistent about the width of the channel counter registers; -+ * it's at least 16 bits, but several places say 20 bits. -+ */ -+#define PWM_NCHAN 4 /* max 32 */ -+ -+struct pwm { -+ spinlock_t lock; -+ struct platform_device *pdev; -+ u32 mask; -+ int irq; -+ void __iomem *base; -+ struct clk *clk; -+ struct pwm_channel *channel[PWM_NCHAN]; -+ void (*handler[PWM_NCHAN])(struct pwm_channel *); -+}; -+ -+ -+/* global PWM controller registers */ -+#define PWM_MR 0x00 -+#define PWM_ENA 0x04 -+#define PWM_DIS 0x08 -+#define PWM_SR 0x0c -+#define PWM_IER 0x10 -+#define PWM_IDR 0x14 -+#define PWM_IMR 0x18 -+#define PWM_ISR 0x1c -+ -+static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val) -+{ -+ __raw_writel(val, p->base + offset); -+} -+ -+static inline u32 pwm_readl(const struct pwm *p, unsigned offset) -+{ -+ return __raw_readl(p->base + offset); -+} -+ -+static inline void __iomem *pwmc_regs(const struct pwm *p, int index) -+{ -+ return p->base + 0x200 + index * 0x20; -+} -+ -+static struct pwm *pwm; -+ -+static void pwm_dumpregs(struct pwm_channel *ch, char *tag) -+{ -+ struct device *dev = &pwm->pdev->dev; -+ -+ dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n", -+ tag, -+ pwm_readl(pwm, PWM_MR), -+ pwm_readl(pwm, PWM_SR), -+ pwm_readl(pwm, PWM_IMR)); -+ dev_dbg(dev, -+ "pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n", -+ ch->index, -+ pwm_channel_readl(ch, PWM_CMR), -+ pwm_channel_readl(ch, PWM_CDTY), -+ pwm_channel_readl(ch, PWM_CPRD), -+ pwm_channel_readl(ch, PWM_CCNT)); -+} -+ -+ -+/** -+ * pwm_channel_alloc - allocate an unused PWM channel -+ * @index: identifies the channel -+ * @ch: structure to be initialized -+ * -+ * Drivers allocate PWM channels according to the board's wiring, and -+ * matching board-specific setup code. Returns zero or negative errno. -+ */ -+int pwm_channel_alloc(int index, struct pwm_channel *ch) -+{ -+ unsigned long flags; -+ int status = 0; -+ -+ /* insist on PWM init, with this signal pinned out */ -+ if (!pwm || !(pwm->mask & 1 << index)) -+ return -ENODEV; -+ -+ if (index < 0 || index >= PWM_NCHAN || !ch) -+ return -EINVAL; -+ memset(ch, 0, sizeof *ch); -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ if (pwm->channel[index]) -+ status = -EBUSY; -+ else { -+ clk_enable(pwm->clk); -+ -+ ch->regs = pwmc_regs(pwm, index); -+ ch->index = index; -+ -+ /* REVISIT: ap7000 seems to go 2x as fast as we expect!! */ -+ ch->mck = clk_get_rate(pwm->clk); -+ -+ pwm->channel[index] = ch; -+ pwm->handler[index] = NULL; -+ -+ /* channel and irq are always disabled when we return */ -+ pwm_writel(pwm, PWM_DIS, 1 << index); -+ pwm_writel(pwm, PWM_IDR, 1 << index); -+ } -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ return status; -+} -+EXPORT_SYMBOL(pwm_channel_alloc); -+ -+static int pwmcheck(struct pwm_channel *ch) -+{ -+ int index; -+ -+ if (!pwm) -+ return -ENODEV; -+ if (!ch) -+ return -EINVAL; -+ index = ch->index; -+ if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch) -+ return -EINVAL; -+ -+ return index; -+} -+ -+/** -+ * pwm_channel_free - release a previously allocated channel -+ * @ch: the channel being released -+ * -+ * The channel is completely shut down (counter and IRQ disabled), -+ * and made available for re-use. Returns zero, or negative errno. -+ */ -+int pwm_channel_free(struct pwm_channel *ch) -+{ -+ unsigned long flags; -+ int t; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ t = pwmcheck(ch); -+ if (t >= 0) { -+ pwm->channel[t] = NULL; -+ pwm->handler[t] = NULL; -+ -+ /* channel and irq are always disabled when we return */ -+ pwm_writel(pwm, PWM_DIS, 1 << t); -+ pwm_writel(pwm, PWM_IDR, 1 << t); -+ -+ clk_disable(pwm->clk); -+ t = 0; -+ } -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ return t; -+} -+EXPORT_SYMBOL(pwm_channel_free); -+ -+int __pwm_channel_onoff(struct pwm_channel *ch, int enabled) -+{ -+ unsigned long flags; -+ int t; -+ -+ /* OMITTED FUNCTIONALITY: starting several channels in synch */ -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ t = pwmcheck(ch); -+ if (t >= 0) { -+ pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t); -+ t = 0; -+ pwm_dumpregs(ch, enabled ? "enable" : "disable"); -+ } -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ -+ return t; -+} -+EXPORT_SYMBOL(__pwm_channel_onoff); -+ -+/** -+ * pwm_clk_alloc - allocate and configure CLKA or CLKB -+ * @prescale: from 0..10, the power of two used to divide MCK -+ * @div: from 1..255, the linear divisor to use -+ * -+ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno. The allocated -+ * clock will run with a period of (2^prescale * div) / MCK, or twice as -+ * long if center aligned PWM output is used. The clock must later be -+ * deconfigured using pwm_clk_free(). -+ */ -+int pwm_clk_alloc(unsigned prescale, unsigned div) -+{ -+ unsigned long flags; -+ u32 mr; -+ u32 val = (prescale << 8) | div; -+ int ret = -EBUSY; -+ -+ if (prescale >= 10 || div == 0 || div > 255) -+ return -EINVAL; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ mr = pwm_readl(pwm, PWM_MR); -+ if ((mr & 0xffff) == 0) { -+ mr |= val; -+ ret = PWM_CPR_CLKA; -+ } -+ if ((mr & (0xffff << 16)) == 0) { -+ mr |= val << 16; -+ ret = PWM_CPR_CLKB; -+ } -+ if (ret > 0) -+ pwm_writel(pwm, PWM_MR, mr); -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ return ret; -+} -+EXPORT_SYMBOL(pwm_clk_alloc); -+ -+/** -+ * pwm_clk_free - deconfigure and release CLKA or CLKB -+ * -+ * Reverses the effect of pwm_clk_alloc(). -+ */ -+void pwm_clk_free(unsigned clk) -+{ -+ unsigned long flags; -+ u32 mr; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ mr = pwm_readl(pwm, PWM_MR); -+ if (clk == PWM_CPR_CLKA) -+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0)); -+ if (clk == PWM_CPR_CLKB) -+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16)); -+ spin_unlock_irqrestore(&pwm->lock, flags); -+} -+EXPORT_SYMBOL(pwm_clk_free); -+ -+/** -+ * pwm_channel_handler - manage channel's IRQ handler -+ * @ch: the channel -+ * @handler: the handler to use, possibly NULL -+ * -+ * If the handler is non-null, the handler will be called after every -+ * period of this PWM channel. If the handler is null, this channel -+ * won't generate an IRQ. -+ */ -+int pwm_channel_handler(struct pwm_channel *ch, -+ void (*handler)(struct pwm_channel *ch)) -+{ -+ unsigned long flags; -+ int t; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ t = pwmcheck(ch); -+ if (t >= 0) { -+ pwm->handler[t] = handler; -+ pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t); -+ t = 0; -+ } -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ -+ return t; -+} -+EXPORT_SYMBOL(pwm_channel_handler); -+ -+static irqreturn_t pwm_irq(int id, void *_pwm) -+{ -+ struct pwm *p = _pwm; -+ irqreturn_t handled = IRQ_NONE; -+ u32 irqstat; -+ int index; -+ -+ spin_lock(&p->lock); -+ -+ /* ack irqs, then handle them */ -+ irqstat = pwm_readl(pwm, PWM_ISR); -+ -+ while (irqstat) { -+ struct pwm_channel *ch; -+ void (*handler)(struct pwm_channel *ch); -+ -+ index = ffs(irqstat) - 1; -+ irqstat &= ~(1 << index); -+ ch = pwm->channel[index]; -+ handler = pwm->handler[index]; -+ if (handler && ch) { -+ spin_unlock(&p->lock); -+ handler(ch); -+ spin_lock(&p->lock); -+ handled = IRQ_HANDLED; -+ } -+ } -+ -+ spin_unlock(&p->lock); -+ return handled; -+} -+ -+static int __init pwm_probe(struct platform_device *pdev) -+{ -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ int irq = platform_get_irq(pdev, 0); -+ u32 *mp = pdev->dev.platform_data; -+ struct pwm *p; -+ int status = -EIO; -+ -+ if (pwm) -+ return -EBUSY; -+ if (!r || irq < 0 || !mp || !*mp) -+ return -ENODEV; -+ if (*mp & ~((1<<PWM_NCHAN)-1)) { -+ dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n", -+ *mp, PWM_NCHAN); -+ return -EINVAL; -+ } -+ -+ p = kzalloc(sizeof(*p), GFP_KERNEL); -+ if (!p) -+ return -ENOMEM; -+ -+ spin_lock_init(&p->lock); -+ p->pdev = pdev; -+ p->mask = *mp; -+ p->irq = irq; -+ p->base = ioremap(r->start, r->end - r->start + 1); -+ if (!p->base) -+ goto fail; -+ p->clk = clk_get(&pdev->dev, "mck"); -+ if (IS_ERR(p->clk)) { -+ status = PTR_ERR(p->clk); -+ p->clk = NULL; -+ goto fail; -+ } -+ -+ status = request_irq(irq, pwm_irq, 0, pdev->name, p); -+ if (status < 0) -+ goto fail; -+ -+ pwm = p; -+ platform_set_drvdata(pdev, p); -+ -+ return 0; -+ -+fail: -+ if (p->clk) -+ clk_put(p->clk); -+ if (p->base) -+ iounmap(p->base); -+ -+ kfree(p); -+ return status; -+} -+ -+static int __exit pwm_remove(struct platform_device *pdev) -+{ -+ struct pwm *p = platform_get_drvdata(pdev); -+ -+ if (p != pwm) -+ return -EINVAL; -+ -+ clk_enable(pwm->clk); -+ pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1); -+ pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1); -+ clk_disable(pwm->clk); -+ -+ pwm = NULL; -+ -+ free_irq(p->irq, p); -+ clk_put(p->clk); -+ iounmap(p->base); -+ kfree(p); -+ -+ return 0; -+} -+ -+static struct platform_driver atmel_pwm_driver = { -+ .driver = { -+ .name = "atmel_pwm", -+ .owner = THIS_MODULE, -+ }, -+ .remove = __exit_p(pwm_remove), -+ -+ /* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states; -+ * and all AT91sam9263 states, albeit at reduced clock rate if -+ * MCK becomes the slow clock (i.e. what Linux labels STR). -+ */ -+}; -+ -+static int __init pwm_init(void) -+{ -+ return platform_driver_probe(&atmel_pwm_driver, pwm_probe); -+} -+module_init(pwm_init); -+ -+static void __exit pwm_exit(void) -+{ -+ platform_driver_unregister(&atmel_pwm_driver); -+} -+module_exit(pwm_exit); -+ -+MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module"); -+MODULE_LICENSE("GPL"); -diff -Nrup linux-2.6.24/drivers/misc/Kconfig linux-avr32/drivers/misc/Kconfig ---- linux-2.6.24/drivers/misc/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/misc/Kconfig 2008-02-01 14:51:39.000000000 -0500 -@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES - - if MISC_DEVICES - -+config ATMEL_PWM -+ tristate "Atmel AT32/AT91 PWM support" -+ depends on (AVR32 || AT91) && EXPERIMENTAL -+ help -+ This option enables device driver support for the PWM channels -+ on certain Atmel prcoessors. Pulse Width Modulation is used for -+ purposes including software controlled power-efficent backlights -+ on LCD displays, motor control, and waveform generation. -+ - config IBM_ASM - tristate "Device driver for IBM RSA service processor" - depends on X86 && PCI && INPUT && EXPERIMENTAL -diff -Nrup linux-2.6.24/drivers/misc/Makefile linux-avr32/drivers/misc/Makefile ---- linux-2.6.24/drivers/misc/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/misc/Makefile 2008-02-01 14:51:39.000000000 -0500 -@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/ - obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ - obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o - obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o -+obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o - obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o - obj-$(CONFIG_LKDTM) += lkdtm.o - obj-$(CONFIG_TIFM_CORE) += tifm_core.o -diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.c linux-avr32/drivers/mmc/host/atmel-mci.c ---- linux-2.6.24/drivers/mmc/host/atmel-mci.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/mmc/host/atmel-mci.c 2008-02-01 14:51:39.000000000 -0500 -@@ -0,0 +1,1176 @@ -+/* -+ * Atmel MultiMedia Card Interface driver -+ * -+ * Copyright (C) 2004-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/blkdev.h> -+#include <linux/clk.h> -+#include <linux/device.h> -+#include <linux/dma-mapping.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/ioport.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+ -+#include <linux/mmc/host.h> -+ -+#include <asm/dma-controller.h> -+#include <asm/io.h> -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+ -+#include "atmel-mci.h" -+ -+#define DRIVER_NAME "atmel_mci" -+ -+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \ -+ MCI_BIT(OVRE) | MCI_BIT(UNRE)) -+ -+enum { -+ EVENT_CMD_COMPLETE = 0, -+ EVENT_DATA_COMPLETE, -+ EVENT_DATA_ERROR, -+ EVENT_STOP_SENT, -+ EVENT_STOP_COMPLETE, -+ EVENT_DMA_COMPLETE, -+ EVENT_DMA_ERROR, -+ EVENT_CARD_DETECT, -+}; -+ -+struct atmel_mci_dma { -+ struct dma_request_sg req; -+ unsigned short rx_periph_id; -+ unsigned short tx_periph_id; -+}; -+ -+struct atmel_mci { -+ struct mmc_host *mmc; -+ void __iomem *regs; -+ struct atmel_mci_dma dma; -+ -+ struct mmc_request *mrq; -+ struct mmc_command *cmd; -+ struct mmc_data *data; -+ -+ u32 cmd_status; -+ u32 data_status; -+ u32 stop_status; -+ u32 stop_cmdr; -+ -+ struct tasklet_struct tasklet; -+ unsigned long pending_events; -+ unsigned long completed_events; -+ -+ int present; -+ int detect_pin; -+ int wp_pin; -+ -+ unsigned long bus_hz; -+ unsigned long mapbase; -+ struct clk *mck; -+ struct platform_device *pdev; -+ -+#ifdef CONFIG_DEBUG_FS -+ struct dentry *debugfs_root; -+ struct dentry *debugfs_regs; -+ struct dentry *debugfs_req; -+ struct dentry *debugfs_pending_events; -+ struct dentry *debugfs_completed_events; -+#endif -+}; -+ -+/* Those printks take an awful lot of time... */ -+#ifndef DEBUG -+static unsigned int fmax = 15000000U; -+#else -+static unsigned int fmax = 1000000U; -+#endif -+module_param(fmax, uint, 0444); -+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock"); -+ -+/* Test bit macros for completed events */ -+#define mci_cmd_is_complete(host) \ -+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events) -+#define mci_data_is_complete(host) \ -+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events) -+#define mci_data_error_is_complete(host) \ -+ test_bit(EVENT_DATA_ERROR, &host->completed_events) -+#define mci_stop_sent_is_complete(host) \ -+ test_bit(EVENT_STOP_SENT, &host->completed_events) -+#define mci_stop_is_complete(host) \ -+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events) -+#define mci_dma_is_complete(host) \ -+ test_bit(EVENT_DMA_COMPLETE, &host->completed_events) -+#define mci_dma_error_is_complete(host) \ -+ test_bit(EVENT_DMA_ERROR, &host->completed_events) -+#define mci_card_detect_is_complete(host) \ -+ test_bit(EVENT_CARD_DETECT, &host->completed_events) -+ -+/* Test and clear bit macros for pending events */ -+#define mci_clear_cmd_is_pending(host) \ -+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events) -+#define mci_clear_data_is_pending(host) \ -+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events) -+#define mci_clear_data_error_is_pending(host) \ -+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events) -+#define mci_clear_stop_sent_is_pending(host) \ -+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events) -+#define mci_clear_stop_is_pending(host) \ -+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events) -+#define mci_clear_dma_error_is_pending(host) \ -+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events) -+#define mci_clear_card_detect_is_pending(host) \ -+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events) -+ -+/* Test and set bit macros for completed events */ -+#define mci_set_cmd_is_completed(host) \ -+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events) -+#define mci_set_data_is_completed(host) \ -+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events) -+#define mci_set_data_error_is_completed(host) \ -+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events) -+#define mci_set_stop_sent_is_completed(host) \ -+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events) -+#define mci_set_stop_is_completed(host) \ -+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events) -+#define mci_set_dma_error_is_completed(host) \ -+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events) -+#define mci_set_card_detect_is_completed(host) \ -+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events) -+ -+/* Set bit macros for completed events */ -+#define mci_set_cmd_complete(host) \ -+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events) -+#define mci_set_data_complete(host) \ -+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events) -+#define mci_set_data_error_complete(host) \ -+ set_bit(EVENT_DATA_ERROR, &host->completed_events) -+#define mci_set_stop_sent_complete(host) \ -+ set_bit(EVENT_STOP_SENT, &host->completed_events) -+#define mci_set_stop_complete(host) \ -+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events) -+#define mci_set_dma_complete(host) \ -+ set_bit(EVENT_DMA_COMPLETE, &host->completed_events) -+#define mci_set_dma_error_complete(host) \ -+ set_bit(EVENT_DMA_ERROR, &host->completed_events) -+#define mci_set_card_detect_complete(host) \ -+ set_bit(EVENT_CARD_DETECT, &host->completed_events) -+ -+/* Set bit macros for pending events */ -+#define mci_set_cmd_pending(host) \ -+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events) -+#define mci_set_data_pending(host) \ -+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events) -+#define mci_set_data_error_pending(host) \ -+ set_bit(EVENT_DATA_ERROR, &host->pending_events) -+#define mci_set_stop_sent_pending(host) \ -+ set_bit(EVENT_STOP_SENT, &host->pending_events) -+#define mci_set_stop_pending(host) \ -+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events) -+#define mci_set_dma_error_pending(host) \ -+ set_bit(EVENT_DMA_ERROR, &host->pending_events) -+#define mci_set_card_detect_pending(host) \ -+ set_bit(EVENT_CARD_DETECT, &host->pending_events) -+ -+/* Clear bit macros for pending events */ -+#define mci_clear_cmd_pending(host) \ -+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events) -+#define mci_clear_data_pending(host) \ -+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events) -+#define mci_clear_data_error_pending(host) \ -+ clear_bit(EVENT_DATA_ERROR, &host->pending_events) -+#define mci_clear_stop_sent_pending(host) \ -+ clear_bit(EVENT_STOP_SENT, &host->pending_events) -+#define mci_clear_stop_pending(host) \ -+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events) -+#define mci_clear_dma_error_pending(host) \ -+ clear_bit(EVENT_DMA_ERROR, &host->pending_events) -+#define mci_clear_card_detect_pending(host) \ -+ clear_bit(EVENT_CARD_DETECT, &host->pending_events) -+ -+ -+#ifdef CONFIG_DEBUG_FS -+#include <linux/debugfs.h> -+ -+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int)) -+ -+struct req_dbg_data { -+ unsigned int nbytes; -+ char str[DBG_REQ_BUF_SIZE]; -+}; -+ -+static int req_dbg_open(struct inode *inode, struct file *file) -+{ -+ struct atmel_mci *host; -+ struct mmc_request *mrq; -+ struct mmc_command *cmd, *stop; -+ struct mmc_data *data; -+ struct req_dbg_data *priv; -+ char *str; -+ unsigned long n = 0; -+ -+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ str = priv->str; -+ -+ mutex_lock(&inode->i_mutex); -+ host = inode->i_private; -+ -+ spin_lock_irq(&host->mmc->lock); -+ mrq = host->mrq; -+ if (mrq) { -+ cmd = mrq->cmd; -+ data = mrq->data; -+ stop = mrq->stop; -+ n = snprintf(str, DBG_REQ_BUF_SIZE, -+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n", -+ cmd->opcode, cmd->arg, cmd->flags, -+ cmd->resp[0], cmd->resp[1], cmd->resp[2], -+ cmd->resp[3], cmd->error); -+ if (n < DBG_REQ_BUF_SIZE && data) -+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n, -+ "DATA %u * %u (%u) %x (err %u)\n", -+ data->blocks, data->blksz, -+ data->bytes_xfered, data->flags, -+ data->error); -+ if (n < DBG_REQ_BUF_SIZE && stop) -+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n, -+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n", -+ stop->opcode, stop->arg, stop->flags, -+ stop->resp[0], stop->resp[1], -+ stop->resp[2], stop->resp[3], -+ stop->error); -+ } -+ spin_unlock_irq(&host->mmc->lock); -+ mutex_unlock(&inode->i_mutex); -+ -+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE); -+ file->private_data = priv; -+ -+ return 0; -+} -+ -+static ssize_t req_dbg_read(struct file *file, char __user *buf, -+ size_t nbytes, loff_t *ppos) -+{ -+ struct req_dbg_data *priv = file->private_data; -+ -+ return simple_read_from_buffer(buf, nbytes, ppos, -+ priv->str, priv->nbytes); -+} -+ -+static int req_dbg_release(struct inode *inode, struct file *file) -+{ -+ kfree(file->private_data); -+ return 0; -+} -+ -+static const struct file_operations req_dbg_fops = { -+ .owner = THIS_MODULE, -+ .open = req_dbg_open, -+ .llseek = no_llseek, -+ .read = req_dbg_read, -+ .release = req_dbg_release, -+}; -+ -+static int regs_dbg_open(struct inode *inode, struct file *file) -+{ -+ struct atmel_mci *host; -+ unsigned int i; -+ u32 *data; -+ int ret = -ENOMEM; -+ -+ mutex_lock(&inode->i_mutex); -+ host = inode->i_private; -+ data = kmalloc(inode->i_size, GFP_KERNEL); -+ if (!data) -+ goto out; -+ -+ spin_lock_irq(&host->mmc->lock); -+ for (i = 0; i < inode->i_size / 4; i++) -+ data[i] = __raw_readl(host->regs + i * 4); -+ spin_unlock_irq(&host->mmc->lock); -+ -+ file->private_data = data; -+ ret = 0; -+ -+out: -+ mutex_unlock(&inode->i_mutex); -+ -+ return ret; -+} -+ -+static ssize_t regs_dbg_read(struct file *file, char __user *buf, -+ size_t nbytes, loff_t *ppos) -+{ -+ struct inode *inode = file->f_dentry->d_inode; -+ int ret; -+ -+ mutex_lock(&inode->i_mutex); -+ ret = simple_read_from_buffer(buf, nbytes, ppos, -+ file->private_data, -+ file->f_dentry->d_inode->i_size); -+ mutex_unlock(&inode->i_mutex); -+ -+ return ret; -+} -+ -+static int regs_dbg_release(struct inode *inode, struct file *file) -+{ -+ kfree(file->private_data); -+ return 0; -+} -+ -+static const struct file_operations regs_dbg_fops = { -+ .owner = THIS_MODULE, -+ .open = regs_dbg_open, -+ .llseek = generic_file_llseek, -+ .read = regs_dbg_read, -+ .release = regs_dbg_release, -+}; -+ -+static void atmci_init_debugfs(struct atmel_mci *host) -+{ -+ struct mmc_host *mmc; -+ struct dentry *root, *regs; -+ struct resource *res; -+ -+ mmc = host->mmc; -+ root = debugfs_create_dir(mmc_hostname(mmc), NULL); -+ if (IS_ERR(root) || !root) -+ goto err_root; -+ host->debugfs_root = root; -+ -+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops); -+ if (!regs) -+ goto err_regs; -+ -+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); -+ regs->d_inode->i_size = res->end - res->start + 1; -+ host->debugfs_regs = regs; -+ -+ host->debugfs_req = debugfs_create_file("req", 0400, root, -+ host, &req_dbg_fops); -+ if (!host->debugfs_req) -+ goto err_req; -+ -+ host->debugfs_pending_events -+ = debugfs_create_u32("pending_events", 0400, root, -+ (u32 *)&host->pending_events); -+ if (!host->debugfs_pending_events) -+ goto err_pending_events; -+ -+ host->debugfs_completed_events -+ = debugfs_create_u32("completed_events", 0400, root, -+ (u32 *)&host->completed_events); -+ if (!host->debugfs_completed_events) -+ goto err_completed_events; -+ -+ return; -+ -+err_completed_events: -+ debugfs_remove(host->debugfs_pending_events); -+err_pending_events: -+ debugfs_remove(host->debugfs_req); -+err_req: -+ debugfs_remove(host->debugfs_regs); -+err_regs: -+ debugfs_remove(host->debugfs_root); -+err_root: -+ host->debugfs_root = NULL; -+ dev_err(&host->pdev->dev, -+ "failed to initialize debugfs for %s\n", -+ mmc_hostname(mmc)); -+} -+ -+static void atmci_cleanup_debugfs(struct atmel_mci *host) -+{ -+ if (host->debugfs_root) { -+ debugfs_remove(host->debugfs_completed_events); -+ debugfs_remove(host->debugfs_pending_events); -+ debugfs_remove(host->debugfs_req); -+ debugfs_remove(host->debugfs_regs); -+ debugfs_remove(host->debugfs_root); -+ host->debugfs_root = NULL; -+ } -+} -+#else -+static inline void atmci_init_debugfs(struct atmel_mci *host) -+{ -+ -+} -+ -+static inline void atmci_cleanup_debugfs(struct atmel_mci *host) -+{ -+ -+} -+#endif /* CONFIG_DEBUG_FS */ -+ -+static inline unsigned int ns_to_clocks(struct atmel_mci *host, -+ unsigned int ns) -+{ -+ return (ns * (host->bus_hz / 1000000) + 999) / 1000; -+} -+ -+static void atmci_set_timeout(struct atmel_mci *host, -+ struct mmc_data *data) -+{ -+ static unsigned dtomul_to_shift[] = { -+ 0, 4, 7, 8, 10, 12, 16, 20 -+ }; -+ unsigned timeout; -+ unsigned dtocyc, dtomul; -+ -+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks; -+ -+ for (dtomul = 0; dtomul < 8; dtomul++) { -+ unsigned shift = dtomul_to_shift[dtomul]; -+ dtocyc = (timeout + (1 << shift) - 1) >> shift; -+ if (dtocyc < 15) -+ break; -+ } -+ -+ if (dtomul >= 8) { -+ dtomul = 7; -+ dtocyc = 15; -+ } -+ -+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", -+ dtocyc << dtomul_to_shift[dtomul]); -+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul) -+ | MCI_BF(DTOCYC, dtocyc))); -+} -+ -+/* -+ * Return mask with command flags to be enabled for this command. -+ */ -+static u32 atmci_prepare_command(struct mmc_host *mmc, -+ struct mmc_command *cmd) -+{ -+ u32 cmdr; -+ -+ cmd->error = 0; -+ -+ cmdr = MCI_BF(CMDNB, cmd->opcode); -+ -+ if (cmd->flags & MMC_RSP_PRESENT) { -+ if (cmd->flags & MMC_RSP_136) -+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT); -+ else -+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT); -+ } -+ -+ /* -+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but -+ * it's too difficult to determine whether this is an ACMD or -+ * not. Better make it 64. -+ */ -+ cmdr |= MCI_BIT(MAXLAT); -+ -+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) -+ cmdr |= MCI_BIT(OPDCMD); -+ -+ dev_dbg(&mmc->class_dev, -+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n", -+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr); -+ -+ return cmdr; -+} -+ -+static void atmci_start_command(struct atmel_mci *host, -+ struct mmc_command *cmd, -+ u32 cmd_flags) -+{ -+ WARN_ON(host->cmd); -+ host->cmd = cmd; -+ -+ mci_writel(host, ARGR, cmd->arg); -+ mci_writel(host, CMDR, cmd_flags); -+ -+ if (cmd->data) -+ dma_start_request(host->dma.req.req.dmac, -+ host->dma.req.req.channel); -+} -+ -+/* -+ * Returns a mask of flags to be set in the command register when the -+ * command to start the transfer is to be sent. -+ */ -+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data) -+{ -+ struct atmel_mci *host = mmc_priv(mmc); -+ u32 cmd_flags; -+ -+ WARN_ON(host->data); -+ host->data = data; -+ -+ atmci_set_timeout(host, data); -+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks) -+ | MCI_BF(BLKLEN, data->blksz))); -+ host->dma.req.block_size = data->blksz; -+ host->dma.req.nr_blocks = data->blocks; -+ -+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS); -+ if (data->flags & MMC_DATA_STREAM) -+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM); -+ else if (data->blocks > 1) -+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK); -+ else -+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK); -+ -+ if (data->flags & MMC_DATA_READ) { -+ cmd_flags |= MCI_BIT(TRDIR); -+ host->dma.req.nr_sg -+ = dma_map_sg(&host->pdev->dev, data->sg, -+ data->sg_len, DMA_FROM_DEVICE); -+ host->dma.req.periph_id = host->dma.rx_periph_id; -+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM; -+ host->dma.req.data_reg = host->mapbase + MCI_RDR; -+ } else { -+ host->dma.req.nr_sg -+ = dma_map_sg(&host->pdev->dev, data->sg, -+ data->sg_len, DMA_TO_DEVICE); -+ host->dma.req.periph_id = host->dma.tx_periph_id; -+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH; -+ host->dma.req.data_reg = host->mapbase + MCI_TDR; -+ } -+ host->dma.req.sg = data->sg; -+ -+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req); -+ -+ return cmd_flags; -+} -+ -+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct atmel_mci *host = mmc_priv(mmc); -+ struct mmc_data *data = mrq->data; -+ u32 iflags; -+ u32 cmdflags = 0; -+ -+ iflags = mci_readl(host, IMR); -+ if (iflags) -+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", -+ mci_readl(host, IMR)); -+ -+ WARN_ON(host->mrq != NULL); -+ host->mrq = mrq; -+ host->pending_events = 0; -+ host->completed_events = 0; -+ -+ iflags = MCI_BIT(CMDRDY); -+ cmdflags = atmci_prepare_command(mmc, mrq->cmd); -+ -+ if (mrq->stop) { -+ WARN_ON(!data); -+ -+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); -+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS); -+ if (!(data->flags & MMC_DATA_WRITE)) -+ host->stop_cmdr |= MCI_BIT(TRDIR); -+ if (data->flags & MMC_DATA_STREAM) -+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM); -+ else -+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK); -+ } -+ if (data) { -+ cmdflags |= atmci_prepare_data(mmc, data); -+ iflags |= MCI_DATA_ERROR_FLAGS; -+ } -+ -+ atmci_start_command(host, mrq->cmd, cmdflags); -+ mci_writel(host, IER, iflags); -+} -+ -+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ struct atmel_mci *host = mmc_priv(mmc); -+ u32 mr; -+ -+ if (ios->clock) { -+ u32 clkdiv; -+ -+ /* Set clock rate */ -+ clkdiv = host->bus_hz / (2 * ios->clock) - 1; -+ if (clkdiv > 255) { -+ dev_warn(&mmc->class_dev, -+ "clock %u too slow; using %lu\n", -+ ios->clock, host->bus_hz / (2 * 256)); -+ clkdiv = 255; -+ } -+ -+ mr = mci_readl(host, MR); -+ mr = MCI_BFINS(CLKDIV, clkdiv, mr) -+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF); -+ mci_writel(host, MR, mr); -+ -+ /* Enable the MCI controller */ -+ mci_writel(host, CR, MCI_BIT(MCIEN)); -+ } else { -+ /* Disable the MCI controller */ -+ mci_writel(host, CR, MCI_BIT(MCIDIS)); -+ } -+ -+ switch (ios->bus_width) { -+ case MMC_BUS_WIDTH_1: -+ mci_writel(host, SDCR, 0); -+ break; -+ case MMC_BUS_WIDTH_4: -+ mci_writel(host, SDCR, MCI_BIT(SDCBUS)); -+ break; -+ } -+ -+ switch (ios->power_mode) { -+ case MMC_POWER_ON: -+ /* Send init sequence (74 clock cycles) */ -+ mci_writel(host, IDR, ~0UL); -+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD)); -+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY))) -+ cpu_relax(); -+ break; -+ default: -+ /* -+ * TODO: None of the currently available AVR32-based -+ * boards allow MMC power to be turned off. Implement -+ * power control when this can be tested properly. -+ */ -+ break; -+ } -+} -+ -+static int atmci_get_ro(struct mmc_host *mmc) -+{ -+ int read_only = 0; -+ struct atmel_mci *host = mmc_priv(mmc); -+ -+ if (host->wp_pin >= 0) { -+ read_only = gpio_get_value(host->wp_pin); -+ dev_dbg(&mmc->class_dev, "card is %s\n", -+ read_only ? "read-only" : "read-write"); -+ } else { -+ dev_dbg(&mmc->class_dev, -+ "no pin for checking read-only switch." -+ " Assuming write-enable.\n"); -+ } -+ -+ return read_only; -+} -+ -+static struct mmc_host_ops atmci_ops = { -+ .request = atmci_request, -+ .set_ios = atmci_set_ios, -+ .get_ro = atmci_get_ro, -+}; -+ -+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct atmel_mci *host = mmc_priv(mmc); -+ -+ WARN_ON(host->cmd || host->data); -+ host->mrq = NULL; -+ -+ mmc_request_done(mmc, mrq); -+} -+ -+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data, -+ u32 flags) -+{ -+ struct atmel_mci *host = mmc_priv(mmc); -+ -+ atmci_start_command(host, data->stop, host->stop_cmdr | flags); -+ mci_writel(host, IER, MCI_BIT(CMDRDY)); -+} -+ -+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data) -+{ -+ host->data = NULL; -+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg, -+ ((data->flags & MMC_DATA_WRITE) -+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); -+ -+ /* -+ * Data might complete before command for very short transfers -+ * (like READ_SCR) -+ */ -+ if (mci_cmd_is_complete(host) -+ && (!data->stop || mci_stop_is_complete(host))) -+ atmci_request_end(host->mmc, data->mrq); -+} -+ -+static void atmci_command_complete(struct atmel_mci *host, -+ struct mmc_command *cmd, u32 status) -+{ -+ if (status & MCI_BIT(RTOE)) -+ cmd->error = -ETIMEDOUT; -+ else if ((cmd->flags & MMC_RSP_CRC) -+ && (status & MCI_BIT(RCRCE))) -+ cmd->error = -EILSEQ; -+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE))) -+ cmd->error = -EIO; -+ -+ if (cmd->error) { -+ dev_dbg(&host->mmc->class_dev, -+ "command error: op=0x%x status=0x%08x\n", -+ cmd->opcode, status); -+ -+ if (cmd->data) { -+ dma_stop_request(host->dma.req.req.dmac, -+ host->dma.req.req.channel); -+ mci_writel(host, IDR, MCI_BIT(NOTBUSY) -+ | MCI_DATA_ERROR_FLAGS); -+ host->data = NULL; -+ } -+ } -+} -+ -+static void atmci_tasklet_func(unsigned long priv) -+{ -+ struct mmc_host *mmc = (struct mmc_host *)priv; -+ struct atmel_mci *host = mmc_priv(mmc); -+ struct mmc_request *mrq = host->mrq; -+ struct mmc_data *data = host->data; -+ -+ dev_vdbg(&mmc->class_dev, -+ "tasklet: pending/completed/mask %lx/%lx/%x\n", -+ host->pending_events, host->completed_events, -+ mci_readl(host, IMR)); -+ -+ if (mci_clear_cmd_is_pending(host)) { -+ mci_set_cmd_complete(host); -+ atmci_command_complete(host, mrq->cmd, host->cmd_status); -+ if (!host->data || mci_data_is_complete(host) -+ || mci_data_error_is_complete(host)) -+ atmci_request_end(mmc, mrq); -+ } -+ if (mci_clear_stop_is_pending(host)) { -+ mci_set_stop_complete(host); -+ atmci_command_complete(host, mrq->stop, host->stop_status); -+ if (mci_data_is_complete(host) -+ || mci_data_error_is_complete(host)) -+ atmci_request_end(mmc, mrq); -+ } -+ if (mci_clear_dma_error_is_pending(host)) { -+ mci_set_dma_error_complete(host); -+ mci_clear_data_pending(host); -+ -+ /* DMA controller got bus error => invalid address */ -+ data->error = -EIO; -+ -+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n", -+ host->data->bytes_xfered); -+ -+ if (data->stop -+ && !mci_set_stop_sent_is_completed(host)) -+ /* TODO: Check if card is still present */ -+ send_stop_cmd(host->mmc, data, 0); -+ -+ atmci_data_complete(host, data); -+ } -+ if (mci_clear_data_error_is_pending(host)) { -+ u32 status = host->data_status; -+ -+ mci_set_data_error_complete(host); -+ mci_clear_data_pending(host); -+ -+ dma_stop_request(host->dma.req.req.dmac, -+ host->dma.req.req.channel); -+ -+ if (status & MCI_BIT(DCRCE)) { -+ dev_dbg(&mmc->class_dev, "data CRC error\n"); -+ data->error = -EILSEQ; -+ } else if (status & MCI_BIT(DTOE)) { -+ dev_dbg(&mmc->class_dev, "data timeout error\n"); -+ data->error = -ETIMEDOUT; -+ } else { -+ dev_dbg(&mmc->class_dev, "data FIFO error\n"); -+ data->error = -EIO; -+ } -+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n", -+ data->bytes_xfered); -+ -+ if (data->stop -+ && !mci_set_stop_sent_is_completed(host)) -+ /* TODO: Check if card is still present */ -+ send_stop_cmd(host->mmc, data, 0); -+ -+ atmci_data_complete(host, data); -+ } -+ if (mci_clear_data_is_pending(host)) { -+ mci_set_data_complete(host); -+ data->bytes_xfered = data->blocks * data->blksz; -+ atmci_data_complete(host, data); -+ } -+ if (mci_clear_card_detect_is_pending(host)) { -+ /* Reset controller if card is gone */ -+ if (!host->present) { -+ mci_writel(host, CR, MCI_BIT(SWRST)); -+ mci_writel(host, IDR, ~0UL); -+ mci_writel(host, CR, MCI_BIT(MCIEN)); -+ } -+ -+ /* Clean up queue if present */ -+ if (mrq) { -+ if (!mci_cmd_is_complete(host)) -+ mrq->cmd->error = -ETIMEDOUT; -+ if (mrq->data && !mci_data_is_complete(host) -+ && !mci_data_error_is_complete(host)) { -+ dma_stop_request(host->dma.req.req.dmac, -+ host->dma.req.req.channel); -+ host->data->error = -ETIMEDOUT; -+ atmci_data_complete(host, data); -+ } -+ if (mrq->stop && !mci_stop_is_complete(host)) -+ mrq->stop->error = -ETIMEDOUT; -+ -+ host->cmd = NULL; -+ atmci_request_end(mmc, mrq); -+ } -+ mmc_detect_change(host->mmc, msecs_to_jiffies(100)); -+ } -+} -+ -+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) -+{ -+ struct atmel_mci *host = mmc_priv(mmc); -+ struct mmc_command *cmd = host->cmd; -+ -+ /* -+ * Read the response now so that we're free to send a new -+ * command immediately. -+ */ -+ cmd->resp[0] = mci_readl(host, RSPR); -+ cmd->resp[1] = mci_readl(host, RSPR); -+ cmd->resp[2] = mci_readl(host, RSPR); -+ cmd->resp[3] = mci_readl(host, RSPR); -+ -+ mci_writel(host, IDR, MCI_BIT(CMDRDY)); -+ host->cmd = NULL; -+ -+ if (mci_stop_sent_is_complete(host)) { -+ host->stop_status = status; -+ mci_set_stop_pending(host); -+ } else { -+ if (host->mrq->stop && mci_dma_is_complete(host) -+ && !mci_set_stop_sent_is_completed(host)) -+ send_stop_cmd(host->mmc, host->data, 0); -+ host->cmd_status = status; -+ mci_set_cmd_pending(host); -+ } -+ -+ tasklet_schedule(&host->tasklet); -+} -+ -+static void atmci_xfer_complete(struct dma_request *_req) -+{ -+ struct dma_request_sg *req = to_dma_request_sg(_req); -+ struct atmel_mci_dma *dma; -+ struct atmel_mci *host; -+ struct mmc_data *data; -+ -+ dma = container_of(req, struct atmel_mci_dma, req); -+ host = container_of(dma, struct atmel_mci, dma); -+ data = host->data; -+ -+ /* -+ * This callback may be called before we see the CMDRDY -+ * interrupt under heavy irq load (possibly caused by other -+ * drivers) or when interrupts are disabled for a long time. -+ */ -+ mci_set_dma_complete(host); -+ if (data->stop && mci_cmd_is_complete(host) -+ && !mci_set_stop_sent_is_completed(host)) -+ send_stop_cmd(host->mmc, data, 0); -+ -+ /* -+ * Regardless of what the documentation says, we have to wait -+ * for NOTBUSY even after block read operations. -+ * -+ * When the DMA transfer is complete, the controller may still -+ * be reading the CRC from the card, i.e. the data transfer is -+ * still in progress and we haven't seen all the potential -+ * error bits yet. -+ */ -+ mci_writel(host, IER, MCI_BIT(NOTBUSY)); -+} -+ -+static void atmci_dma_error(struct dma_request *_req) -+{ -+ struct dma_request_sg *req = to_dma_request_sg(_req); -+ struct atmel_mci_dma *dma; -+ struct atmel_mci *host; -+ -+ dma = container_of(req, struct atmel_mci_dma, req); -+ host = container_of(dma, struct atmel_mci, dma); -+ -+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY) -+ | MCI_DATA_ERROR_FLAGS)); -+ -+ mci_set_dma_error_pending(host); -+ tasklet_schedule(&host->tasklet); -+} -+ -+static irqreturn_t atmci_interrupt(int irq, void *dev_id) -+{ -+ struct mmc_host *mmc = dev_id; -+ struct atmel_mci *host = mmc_priv(mmc); -+ u32 status, mask, pending; -+ -+ spin_lock(&mmc->lock); -+ -+ status = mci_readl(host, SR); -+ mask = mci_readl(host, IMR); -+ pending = status & mask; -+ -+ do { -+ if (pending & MCI_DATA_ERROR_FLAGS) { -+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY) -+ | MCI_DATA_ERROR_FLAGS)); -+ host->data_status = status; -+ mci_set_data_error_pending(host); -+ tasklet_schedule(&host->tasklet); -+ break; -+ } -+ if (pending & MCI_BIT(CMDRDY)) -+ atmci_cmd_interrupt(mmc, status); -+ if (pending & MCI_BIT(NOTBUSY)) { -+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY) -+ | MCI_DATA_ERROR_FLAGS)); -+ mci_set_data_pending(host); -+ tasklet_schedule(&host->tasklet); -+ } -+ -+ status = mci_readl(host, SR); -+ mask = mci_readl(host, IMR); -+ pending = status & mask; -+ } while (pending); -+ -+ spin_unlock(&mmc->lock); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t atmci_detect_change(int irq, void *dev_id) -+{ -+ struct mmc_host *mmc = dev_id; -+ struct atmel_mci *host = mmc_priv(mmc); -+ -+ int present = !gpio_get_value(irq_to_gpio(irq)); -+ -+ if (present != host->present) { -+ dev_dbg(&mmc->class_dev, "card %s\n", -+ present ? "inserted" : "removed"); -+ host->present = present; -+ mci_set_card_detect_pending(host); -+ tasklet_schedule(&host->tasklet); -+ } -+ return IRQ_HANDLED; -+} -+ -+static int __devinit atmci_probe(struct platform_device *pdev) -+{ -+ struct mci_platform_data *board; -+ struct atmel_mci *host; -+ struct mmc_host *mmc; -+ struct resource *regs; -+ int irq; -+ int ret; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) -+ return -ENXIO; -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return irq; -+ -+ board = pdev->dev.platform_data; -+ -+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); -+ if (!mmc) -+ return -ENOMEM; -+ -+ host = mmc_priv(mmc); -+ host->pdev = pdev; -+ host->mmc = mmc; -+ if (board) { -+ host->detect_pin = board->detect_pin; -+ host->wp_pin = board->wp_pin; -+ } else { -+ host->detect_pin = -1; -+ host->detect_pin = -1; -+ } -+ -+ host->mck = clk_get(&pdev->dev, "mci_clk"); -+ if (IS_ERR(host->mck)) { -+ ret = PTR_ERR(host->mck); -+ goto out_free_host; -+ } -+ clk_enable(host->mck); -+ -+ ret = -ENOMEM; -+ host->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!host->regs) -+ goto out_disable_clk; -+ -+ host->bus_hz = clk_get_rate(host->mck); -+ host->mapbase = regs->start; -+ -+ mmc->ops = &atmci_ops; -+ mmc->f_min = (host->bus_hz + 511) / 512; -+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax); -+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; -+ mmc->caps |= MMC_CAP_4_BIT_DATA; -+ -+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); -+ -+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc); -+ if (ret) -+ goto out_unmap; -+ -+ /* Assume card is present if we don't have a detect pin */ -+ host->present = 1; -+ if (host->detect_pin >= 0) { -+ if (gpio_request(host->detect_pin, "mmc_detect")) { -+ dev_dbg(&mmc->class_dev, "no detect pin available\n"); -+ host->detect_pin = -1; -+ } else { -+ host->present = !gpio_get_value(host->detect_pin); -+ } -+ } -+ if (host->wp_pin >= 0) { -+ if (gpio_request(host->wp_pin, "mmc_wp")) { -+ dev_dbg(&mmc->class_dev, "no WP pin available\n"); -+ host->wp_pin = -1; -+ } -+ } -+ -+ /* TODO: Get this information from platform data */ -+ ret = -ENOMEM; -+ host->dma.req.req.dmac = find_dma_controller(0); -+ if (!host->dma.req.req.dmac) { -+ dev_dbg(&mmc->class_dev, "no DMA controller available\n"); -+ goto out_free_irq; -+ } -+ ret = dma_alloc_channel(host->dma.req.req.dmac); -+ if (ret < 0) { -+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n"); -+ goto out_free_irq; -+ } -+ host->dma.req.req.channel = ret; -+ host->dma.req.width = DMA_WIDTH_32BIT; -+ host->dma.req.req.xfer_complete = atmci_xfer_complete; -+ host->dma.req.req.block_complete = NULL; // atmci_block_complete; -+ host->dma.req.req.error = atmci_dma_error; -+ host->dma.rx_periph_id = 0; -+ host->dma.tx_periph_id = 1; -+ -+ mci_writel(host, CR, MCI_BIT(SWRST)); -+ mci_writel(host, IDR, ~0UL); -+ -+ platform_set_drvdata(pdev, host); -+ -+ mmc_add_host(mmc); -+ -+ if (host->detect_pin >= 0) { -+ ret = request_irq(gpio_to_irq(host->detect_pin), -+ atmci_detect_change, -+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, -+ DRIVER_NAME, mmc); -+ if (ret) { -+ dev_dbg(&mmc->class_dev, -+ "could not request IRQ %d for detect pin\n", -+ gpio_to_irq(host->detect_pin)); -+ gpio_free(host->detect_pin); -+ host->detect_pin = -1; -+ } -+ } -+ -+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n", -+ host->mapbase, irq); -+ -+ atmci_init_debugfs(host); -+ -+ return 0; -+ -+out_free_irq: -+ if (host->detect_pin >= 0) -+ gpio_free(host->detect_pin); -+ if (host->wp_pin >= 0) -+ gpio_free(host->wp_pin); -+ free_irq(irq, mmc); -+out_unmap: -+ iounmap(host->regs); -+out_disable_clk: -+ clk_disable(host->mck); -+ clk_put(host->mck); -+out_free_host: -+ mmc_free_host(mmc); -+ return ret; -+} -+ -+static int __devexit atmci_remove(struct platform_device *pdev) -+{ -+ struct atmel_mci *host = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ if (host) { -+ atmci_cleanup_debugfs(host); -+ -+ if (host->detect_pin >= 0) { -+ free_irq(gpio_to_irq(host->detect_pin), host->mmc); -+ cancel_delayed_work(&host->mmc->detect); -+ gpio_free(host->detect_pin); -+ } -+ -+ mmc_remove_host(host->mmc); -+ -+ mci_writel(host, IDR, ~0UL); -+ mci_writel(host, CR, MCI_BIT(MCIDIS)); -+ mci_readl(host, SR); -+ -+ dma_release_channel(host->dma.req.req.dmac, -+ host->dma.req.req.channel); -+ -+ if (host->wp_pin >= 0) -+ gpio_free(host->wp_pin); -+ -+ free_irq(platform_get_irq(pdev, 0), host->mmc); -+ iounmap(host->regs); -+ -+ clk_disable(host->mck); -+ clk_put(host->mck); -+ -+ mmc_free_host(host->mmc); -+ } -+ return 0; -+} -+ -+static struct platform_driver atmci_driver = { -+ .probe = atmci_probe, -+ .remove = __devexit_p(atmci_remove), -+ .driver = { -+ .name = DRIVER_NAME, -+ }, -+}; -+ -+static int __init atmci_init(void) -+{ -+ return platform_driver_register(&atmci_driver); -+} -+ -+static void __exit atmci_exit(void) -+{ -+ platform_driver_unregister(&atmci_driver); -+} -+ -+module_init(atmci_init); -+module_exit(atmci_exit); -+ -+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); -+MODULE_LICENSE("GPL"); -diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.h linux-avr32/drivers/mmc/host/atmel-mci.h ---- linux-2.6.24/drivers/mmc/host/atmel-mci.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/mmc/host/atmel-mci.h 2008-02-01 14:51:39.000000000 -0500 -@@ -0,0 +1,192 @@ -+/* -+ * Atmel MultiMedia Card Interface driver -+ * -+ * Copyright (C) 2004-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ -+#define __DRIVERS_MMC_ATMEL_MCI_H__ -+ -+/* MCI register offsets */ -+#define MCI_CR 0x0000 -+#define MCI_MR 0x0004 -+#define MCI_DTOR 0x0008 -+#define MCI_SDCR 0x000c -+#define MCI_ARGR 0x0010 -+#define MCI_CMDR 0x0014 -+#define MCI_BLKR 0x0018 -+#define MCI_RSPR 0x0020 -+#define MCI_RSPR1 0x0024 -+#define MCI_RSPR2 0x0028 -+#define MCI_RSPR3 0x002c -+#define MCI_RDR 0x0030 -+#define MCI_TDR 0x0034 -+#define MCI_SR 0x0040 -+#define MCI_IER 0x0044 -+#define MCI_IDR 0x0048 -+#define MCI_IMR 0x004c -+ -+/* Bitfields in CR */ -+#define MCI_MCIEN_OFFSET 0 -+#define MCI_MCIEN_SIZE 1 -+#define MCI_MCIDIS_OFFSET 1 -+#define MCI_MCIDIS_SIZE 1 -+#define MCI_PWSEN_OFFSET 2 -+#define MCI_PWSEN_SIZE 1 -+#define MCI_PWSDIS_OFFSET 3 -+#define MCI_PWSDIS_SIZE 1 -+#define MCI_SWRST_OFFSET 7 -+#define MCI_SWRST_SIZE 1 -+ -+/* Bitfields in MR */ -+#define MCI_CLKDIV_OFFSET 0 -+#define MCI_CLKDIV_SIZE 8 -+#define MCI_PWSDIV_OFFSET 8 -+#define MCI_PWSDIV_SIZE 3 -+#define MCI_RDPROOF_OFFSET 11 -+#define MCI_RDPROOF_SIZE 1 -+#define MCI_WRPROOF_OFFSET 12 -+#define MCI_WRPROOF_SIZE 1 -+#define MCI_DMAPADV_OFFSET 14 -+#define MCI_DMAPADV_SIZE 1 -+#define MCI_BLKLEN_OFFSET 16 -+#define MCI_BLKLEN_SIZE 16 -+ -+/* Bitfields in DTOR */ -+#define MCI_DTOCYC_OFFSET 0 -+#define MCI_DTOCYC_SIZE 4 -+#define MCI_DTOMUL_OFFSET 4 -+#define MCI_DTOMUL_SIZE 3 -+ -+/* Bitfields in SDCR */ -+#define MCI_SDCSEL_OFFSET 0 -+#define MCI_SDCSEL_SIZE 4 -+#define MCI_SDCBUS_OFFSET 7 -+#define MCI_SDCBUS_SIZE 1 -+ -+/* Bitfields in ARGR */ -+#define MCI_ARG_OFFSET 0 -+#define MCI_ARG_SIZE 32 -+ -+/* Bitfields in CMDR */ -+#define MCI_CMDNB_OFFSET 0 -+#define MCI_CMDNB_SIZE 6 -+#define MCI_RSPTYP_OFFSET 6 -+#define MCI_RSPTYP_SIZE 2 -+#define MCI_SPCMD_OFFSET 8 -+#define MCI_SPCMD_SIZE 3 -+#define MCI_OPDCMD_OFFSET 11 -+#define MCI_OPDCMD_SIZE 1 -+#define MCI_MAXLAT_OFFSET 12 -+#define MCI_MAXLAT_SIZE 1 -+#define MCI_TRCMD_OFFSET 16 -+#define MCI_TRCMD_SIZE 2 -+#define MCI_TRDIR_OFFSET 18 -+#define MCI_TRDIR_SIZE 1 -+#define MCI_TRTYP_OFFSET 19 -+#define MCI_TRTYP_SIZE 2 -+ -+/* Bitfields in BLKR */ -+#define MCI_BCNT_OFFSET 0 -+#define MCI_BCNT_SIZE 16 -+ -+/* Bitfields in RSPRn */ -+#define MCI_RSP_OFFSET 0 -+#define MCI_RSP_SIZE 32 -+ -+/* Bitfields in SR/IER/IDR/IMR */ -+#define MCI_CMDRDY_OFFSET 0 -+#define MCI_CMDRDY_SIZE 1 -+#define MCI_RXRDY_OFFSET 1 -+#define MCI_RXRDY_SIZE 1 -+#define MCI_TXRDY_OFFSET 2 -+#define MCI_TXRDY_SIZE 1 -+#define MCI_BLKE_OFFSET 3 -+#define MCI_BLKE_SIZE 1 -+#define MCI_DTIP_OFFSET 4 -+#define MCI_DTIP_SIZE 1 -+#define MCI_NOTBUSY_OFFSET 5 -+#define MCI_NOTBUSY_SIZE 1 -+#define MCI_ENDRX_OFFSET 6 -+#define MCI_ENDRX_SIZE 1 -+#define MCI_ENDTX_OFFSET 7 -+#define MCI_ENDTX_SIZE 1 -+#define MCI_RXBUFF_OFFSET 14 -+#define MCI_RXBUFF_SIZE 1 -+#define MCI_TXBUFE_OFFSET 15 -+#define MCI_TXBUFE_SIZE 1 -+#define MCI_RINDE_OFFSET 16 -+#define MCI_RINDE_SIZE 1 -+#define MCI_RDIRE_OFFSET 17 -+#define MCI_RDIRE_SIZE 1 -+#define MCI_RCRCE_OFFSET 18 -+#define MCI_RCRCE_SIZE 1 -+#define MCI_RENDE_OFFSET 19 -+#define MCI_RENDE_SIZE 1 -+#define MCI_RTOE_OFFSET 20 -+#define MCI_RTOE_SIZE 1 -+#define MCI_DCRCE_OFFSET 21 -+#define MCI_DCRCE_SIZE 1 -+#define MCI_DTOE_OFFSET 22 -+#define MCI_DTOE_SIZE 1 -+#define MCI_OVRE_OFFSET 30 -+#define MCI_OVRE_SIZE 1 -+#define MCI_UNRE_OFFSET 31 -+#define MCI_UNRE_SIZE 1 -+ -+/* Constants for DTOMUL */ -+#define MCI_DTOMUL_1_CYCLE 0 -+#define MCI_DTOMUL_16_CYCLES 1 -+#define MCI_DTOMUL_128_CYCLES 2 -+#define MCI_DTOMUL_256_CYCLES 3 -+#define MCI_DTOMUL_1024_CYCLES 4 -+#define MCI_DTOMUL_4096_CYCLES 5 -+#define MCI_DTOMUL_65536_CYCLES 6 -+#define MCI_DTOMUL_1048576_CYCLES 7 -+ -+/* Constants for RSPTYP */ -+#define MCI_RSPTYP_NO_RESP 0 -+#define MCI_RSPTYP_48_BIT 1 -+#define MCI_RSPTYP_136_BIT 2 -+ -+/* Constants for SPCMD */ -+#define MCI_SPCMD_NO_SPEC_CMD 0 -+#define MCI_SPCMD_INIT_CMD 1 -+#define MCI_SPCMD_SYNC_CMD 2 -+#define MCI_SPCMD_INT_CMD 4 -+#define MCI_SPCMD_INT_RESP 5 -+ -+/* Constants for TRCMD */ -+#define MCI_TRCMD_NO_TRANS 0 -+#define MCI_TRCMD_START_TRANS 1 -+#define MCI_TRCMD_STOP_TRANS 2 -+ -+/* Constants for TRTYP */ -+#define MCI_TRTYP_BLOCK 0 -+#define MCI_TRTYP_MULTI_BLOCK 1 -+#define MCI_TRTYP_STREAM 2 -+ -+/* Bit manipulation macros */ -+#define MCI_BIT(name) \ -+ (1 << MCI_##name##_OFFSET) -+#define MCI_BF(name,value) \ -+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \ -+ << MCI_##name##_OFFSET) -+#define MCI_BFEXT(name,value) \ -+ (((value) >> MCI_##name##_OFFSET) \ -+ & ((1 << MCI_##name##_SIZE) - 1)) -+#define MCI_BFINS(name,value,old) \ -+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \ -+ << MCI_##name##_OFFSET)) \ -+ | MCI_BF(name,value)) -+ -+/* Register access macros */ -+#define mci_readl(port,reg) \ -+ __raw_readl((port)->regs + MCI_##reg) -+#define mci_writel(port,reg,value) \ -+ __raw_writel((value), (port)->regs + MCI_##reg) -+ -+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ -diff -Nrup linux-2.6.24/drivers/mmc/host/Kconfig linux-avr32/drivers/mmc/host/Kconfig ---- linux-2.6.24/drivers/mmc/host/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/mmc/host/Kconfig 2008-02-01 14:51:39.000000000 -0500 -@@ -91,6 +91,16 @@ config MMC_AT91 - - If unsure, say N. - -+config MMC_ATMELMCI -+ tristate "Atmel Multimedia Card Interface support" -+ depends on AVR32 && MMC -+ help -+ This selects the Atmel Multimedia Card Interface. If you have -+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card -+ slot, say Y or M here. -+ -+ If unsure, say N. -+ - config MMC_IMX - tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_IMX -diff -Nrup linux-2.6.24/drivers/mmc/host/Makefile linux-avr32/drivers/mmc/host/Makefile ---- linux-2.6.24/drivers/mmc/host/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/mmc/host/Makefile 2008-02-01 14:51:39.000000000 -0500 -@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o - obj-$(CONFIG_MMC_AU1X) += au1xmmc.o - obj-$(CONFIG_MMC_OMAP) += omap.o - obj-$(CONFIG_MMC_AT91) += at91_mci.o -+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o - obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o - obj-$(CONFIG_MMC_SPI) += mmc_spi.o - -diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c ---- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c 2008-02-01 14:51:39.000000000 -0500 -@@ -50,6 +50,7 @@ - #define I82802AC 0x00ac - #define MANUFACTURER_ST 0x0020 - #define M50LPW080 0x002F -+#define AT49BV640D 0x02de - - static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi - } - #endif - -+/* Atmel chips don't use the same PRI format as Intel chips */ -+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) -+{ -+ struct map_info *map = mtd->priv; -+ struct cfi_private *cfi = map->fldrv_priv; -+ struct cfi_pri_intelext *extp = cfi->cmdset_priv; -+ struct cfi_pri_atmel atmel_pri; -+ uint32_t features = 0; -+ -+ /* Reverse byteswapping */ -+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport); -+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask); -+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr); -+ -+ memcpy(&atmel_pri, extp, sizeof(atmel_pri)); -+ memset((char *)extp + 5, 0, sizeof(*extp) - 5); -+ -+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features); -+ -+ if (atmel_pri.Features & 0x01) /* chip erase supported */ -+ features |= (1<<0); -+ if (atmel_pri.Features & 0x02) /* erase suspend supported */ -+ features |= (1<<1); -+ if (atmel_pri.Features & 0x04) /* program suspend supported */ -+ features |= (1<<2); -+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */ -+ features |= (1<<9); -+ if (atmel_pri.Features & 0x20) /* page mode read supported */ -+ features |= (1<<7); -+ if (atmel_pri.Features & 0x40) /* queued erase supported */ -+ features |= (1<<4); -+ if (atmel_pri.Features & 0x80) /* Protection bits supported */ -+ features |= (1<<6); -+ -+ extp->FeatureSupport = features; -+ -+ /* burst write mode not supported */ -+ cfi->cfiq->BufWriteTimeoutTyp = 0; -+ cfi->cfiq->BufWriteTimeoutMax = 0; -+} -+ - #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE - /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */ - static void fixup_intel_strataflash(struct mtd_info *mtd, void* param) -@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struc - } - - static struct cfi_fixup cfi_fixup_table[] = { -+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, - #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE - { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL }, - #endif -diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c 2008-02-01 14:51:39.000000000 -0500 -@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(stru - extp->TopBottom = 2; - else - extp->TopBottom = 3; -+ -+ /* burst write mode not supported */ -+ cfi->cfiq->BufWriteTimeoutTyp = 0; -+ cfi->cfiq->BufWriteTimeoutMax = 0; - } - - static void fixup_use_secsi(struct mtd_info *mtd, void *param) -@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct - } - - static struct cfi_fixup cfi_fixup_table[] = { -+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, - #ifdef AMD_BOOTLOC_BUG - { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, - #endif -@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[ - #if !FORCE_WORD_WRITE - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, - #endif -- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, - { 0, 0, NULL, NULL } - }; - static struct cfi_fixup jedec_fixup_table[] = { -diff -Nrup linux-2.6.24/drivers/pcmcia/at32_cf.c linux-avr32/drivers/pcmcia/at32_cf.c ---- linux-2.6.24/drivers/pcmcia/at32_cf.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/drivers/pcmcia/at32_cf.c 2008-02-01 14:51:42.000000000 -0500 -@@ -0,0 +1,533 @@ -+/* -+ * Driver for AVR32 Static Memory Controller: CompactFlash support -+ * -+ * Copyright (C) 2006 Atmel Norway -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -+ * 02111-1307, USA. -+ * -+ * The full GNU General Public License is included in this -+ * distribution in the file called COPYING. -+ */ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/err.h> -+#include <linux/clk.h> -+#include <linux/dma-mapping.h> -+ -+#include <pcmcia/ss.h> -+ -+#include <asm/gpio.h> -+#include <asm/io.h> -+#include <asm/arch/board.h> -+ -+#include <asm/arch/smc.h> -+ -+struct at32_cf_socket { -+ struct pcmcia_socket socket; -+ int detect_pin; -+ int reset_pin; -+ int vcc_pin; -+ int ready_pin; -+ struct resource res_attr; -+ struct resource res_mem; -+ struct resource res_io; -+ struct smc_config smc; -+ unsigned int irq; -+ unsigned int cf_cs; -+ socket_state_t state; -+ unsigned present:1; -+}; -+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket) -+ -+/* -+ * We have the following memory layout relative to the base address: -+ * -+ * Alt IDE Mode: 00e0 0000 -> 00ff ffff -+ * True IDE Mode: 00c0 0000 -> 00df ffff -+ * I/O memory: 0080 0000 -> 00bf ffff -+ * Common memory: 0040 0000 -> 007f ffff -+ * Attribute memory: 0000 0000 -> 003f ffff -+ */ -+#define CF_ATTR_OFFSET 0x00000000 -+#define CF_MEM_OFFSET 0x00400000 -+#define CF_IO_OFFSET 0x00800000 -+#define CF_RES_SIZE 4096 -+ -+#ifdef DEBUG -+ -+static int pc_debug; -+module_param(pc_debug, int, 0644); -+ -+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func, -+ int level, const char *fmt, ...) -+{ -+ va_list args; -+ -+ if (pc_debug > level) { -+ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func); -+ va_start(args, fmt); -+ vprintk(fmt, args); -+ va_end(args); -+ } -+} -+ -+#define debug(cf, lvl, fmt, arg...) \ -+ at32_cf_debug(cf, __func__, lvl, fmt, ##arg) -+ -+#else -+#define debug(cf, lvl, fmt, arg...) do { } while (0) -+#endif -+ -+static inline int at32_cf_present(struct at32_cf_socket *cf) -+{ -+ int present = 1; -+ -+ /* If we don't have a detect pin, assume the card is present */ -+ if (cf->detect_pin >= 0) -+ present = !gpio_get_value(cf->detect_pin); -+ -+ return present; -+} -+ -+static irqreturn_t at32_cf_irq(int irq, void *dev_id) -+{ -+ struct at32_cf_socket *cf = dev_id; -+ unsigned int present; -+ -+ present = at32_cf_present(cf); -+ if (present != cf->present) { -+ cf->present = present; -+ debug(cf, 3, "card %s\n", present ? "present" : "gone"); -+ pcmcia_parse_events(&cf->socket, SS_DETECT); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value) -+{ -+ struct at32_cf_socket *cf; -+ u_int status = 0; -+ -+ cf = container_of(sock, struct at32_cf_socket, socket); -+ -+ if (at32_cf_present(cf)) { -+ /* NOTE: gpio on AP7xxx is 3.3V */ -+ status = SS_DETECT | SS_3VCARD; -+ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin)) -+ status |= SS_READY; -+ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin)) -+ status |= SS_POWERON; -+ } -+ -+ *value = status; -+ return 0; -+} -+ -+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state) -+{ -+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket); -+ -+ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n", -+ (state->csc_mask==0)?"<NONE> ":"", -+ (state->csc_mask&SS_DETECT)?"DETECT ":"", -+ (state->csc_mask&SS_READY)?"READY ":"", -+ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", -+ (state->csc_mask&SS_BATWARN)?"BATWARN ":"", -+ (state->csc_mask&SS_STSCHG)?"STSCHG ":"", -+ (state->flags==0)?"<NONE> ":"", -+ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", -+ (state->flags&SS_IOCARD)?"IOCARD ":"", -+ (state->flags&SS_RESET)?"RESET ":"", -+ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", -+ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"", -+ state->Vcc, state->Vpp, state->io_irq); -+ -+ /* -+ * TODO: Allow boards to override this in case they have level -+ * converters. -+ */ -+ switch (state->Vcc) { -+ case 0: -+ if (cf->vcc_pin >= 0) -+ gpio_set_value(cf->vcc_pin, 0); -+ break; -+ case 33: -+ if (cf->vcc_pin >= 0) -+ gpio_set_value(cf->vcc_pin, 1); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (cf->reset_pin >= 0) -+ gpio_set_value(cf->reset_pin, state->flags & SS_RESET); -+ -+ cf->state = *state; -+ -+ return 0; -+} -+ -+static int at32_cf_socket_init(struct pcmcia_socket *sock) -+{ -+ debug(to_at32_cf(sock), 2, "called\n"); -+ -+ return 0; -+} -+ -+static int at32_cf_suspend(struct pcmcia_socket *sock) -+{ -+ debug(to_at32_cf(sock), 2, "called\n"); -+ -+ at32_cf_set_socket(sock, &dead_socket); -+ -+ return 0; -+} -+ -+static int at32_cf_set_io_map(struct pcmcia_socket *sock, -+ struct pccard_io_map *map) -+{ -+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket); -+ int retval; -+ -+ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n", -+ map->map, map->speed, map->start, map->stop); -+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n", -+ (map->flags == 0) ? "<NONE>":"", -+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", -+ (map->flags & MAP_16BIT) ? "16BIT " : "", -+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", -+ (map->flags & MAP_0WS) ? "0WS " : "", -+ (map->flags & MAP_WRPROT) ? "WRPROT " : "", -+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", -+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); -+ -+ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT; -+ -+ if (map->flags & MAP_16BIT) -+ cf->smc.bus_width = 2; -+ else -+ cf->smc.bus_width = 1; -+ -+ if (map->flags & MAP_USE_WAIT) -+ cf->smc.nwait_mode = 3; -+ else -+ cf->smc.nwait_mode = 0; -+ -+ retval = smc_set_configuration(cf->cf_cs, &cf->smc); -+ if (retval) { -+ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n"); -+ return retval; -+ } -+ -+ map->start = cf->socket.io_offset; -+ map->stop = map->start + CF_RES_SIZE - 1; -+ -+ return 0; -+} -+ -+static int -+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) -+{ -+ struct at32_cf_socket *cf; -+ struct resource *res; -+ int retval; -+ -+ cf = container_of(sock, struct at32_cf_socket, socket); -+ -+ debug(cf, 2, "map %u speed %u card_start %08x\n", -+ map->map, map->speed, map->card_start); -+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n", -+ (map->flags==0)?"<NONE>":"", -+ (map->flags&MAP_ACTIVE)?"ACTIVE ":"", -+ (map->flags&MAP_16BIT)?"16BIT ":"", -+ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", -+ (map->flags&MAP_0WS)?"0WS ":"", -+ (map->flags&MAP_WRPROT)?"WRPROT ":"", -+ (map->flags&MAP_ATTRIB)?"ATTRIB ":"", -+ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":""); -+ -+ if (map->card_start) -+ return -EINVAL; -+ -+ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT; -+ -+ if (map->flags & MAP_ATTRIB) { -+ res = &cf->res_attr; -+ -+ /* Linksys WCF12 seems to use WAIT when reading CIS */ -+ map->flags |= MAP_USE_WAIT; -+ } else { -+ res = &cf->res_mem; -+ } -+ -+ if (map->flags & MAP_USE_WAIT) -+ cf->smc.nwait_mode = 3; -+ else -+ cf->smc.nwait_mode = 0; -+ -+ retval = smc_set_configuration(cf->cf_cs, &cf->smc); -+ if (retval) { -+ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n"); -+ return retval; -+ } -+ -+ map->static_start = res->start; -+ -+ return 0; -+} -+ -+static struct pccard_operations at32_cf_ops = { -+ .init = at32_cf_socket_init, -+ .suspend = at32_cf_suspend, -+ .get_status = at32_cf_get_status, -+ .set_socket = at32_cf_set_socket, -+ .set_io_map = at32_cf_set_io_map, -+ .set_mem_map = at32_cf_set_mem_map, -+}; -+ -+static int __init request_pin(struct platform_device *pdev, -+ unsigned int pin, const char *name) -+{ -+ if (gpio_request(pin, name)) { -+ dev_warn(&pdev->dev, "failed to request %s pin\n", name); -+ return -1; -+ } -+ -+ return pin; -+} -+ -+static struct smc_timing at32_cf_timing __initdata = { -+ .ncs_read_setup = 30, -+ .nrd_setup = 100, -+ .ncs_write_setup = 30, -+ .nwe_setup = 100, -+ -+ .ncs_read_pulse = 360, -+ .nrd_pulse = 290, -+ .ncs_write_pulse = 360, -+ .nwe_pulse = 290, -+ -+ .read_cycle = 420, -+ .write_cycle = 420, -+}; -+ -+static int __init at32_cf_probe(struct platform_device *pdev) -+{ -+ struct at32_cf_socket *cf; -+ struct cf_platform_data *board = pdev->dev.platform_data; -+ struct resource *res_skt; -+ int irq; -+ int ret; -+ -+ dev_dbg(&pdev->dev, "probe"); -+ -+ if (!board) -+ return -ENXIO; -+ -+ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res_skt) -+ return -ENXIO; -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return irq; -+ -+ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL); -+ if (!cf) -+ return -ENOMEM; -+ -+ cf->detect_pin = -1; -+ cf->reset_pin = -1; -+ cf->vcc_pin = -1; -+ cf->ready_pin = -1; -+ cf->cf_cs = board->cs; -+ -+ if (board->detect_pin != GPIO_PIN_NONE) -+ cf->detect_pin = request_pin(pdev, board->detect_pin, -+ "cf_detect"); -+ if (board->reset_pin != GPIO_PIN_NONE) -+ cf->reset_pin = request_pin(pdev, board->reset_pin, -+ "cf_reset"); -+ if (board->vcc_pin != GPIO_PIN_NONE) -+ cf->vcc_pin = request_pin(pdev, board->vcc_pin, -+ "cf_vcc"); -+ if (board->ready_pin != GPIO_PIN_NONE) -+ /* READY is also used for irq through EIM */ -+ cf->ready_pin = board->ready_pin; -+ -+ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n", -+ cf->detect_pin, cf->reset_pin, cf->vcc_pin); -+ -+ cf->socket.pci_irq = irq; -+ cf->socket.ops = &at32_cf_ops; -+ cf->socket.resource_ops = &pccard_static_ops; -+ cf->socket.dev.parent = &pdev->dev; -+ cf->socket.owner = THIS_MODULE; -+ cf->socket.features = -+ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD; -+ cf->socket.map_size = CF_RES_SIZE; -+ -+ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET; -+ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1; -+ cf->res_attr.name = "attribute"; -+ cf->res_attr.flags = IORESOURCE_MEM; -+ ret = request_resource(res_skt, &cf->res_attr); -+ if (ret) -+ goto err_request_res_attr; -+ -+ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET; -+ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1; -+ cf->res_mem.name = "memory"; -+ cf->res_mem.flags = IORESOURCE_MEM; -+ ret = request_resource(res_skt, &cf->res_mem); -+ if (ret) -+ goto err_request_res_mem; -+ -+ cf->res_io.start = res_skt->start + CF_IO_OFFSET; -+ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1; -+ cf->res_io.name = "io"; -+ cf->res_io.flags = IORESOURCE_MEM; -+ ret = request_resource(res_skt, &cf->res_io); -+ if (ret) -+ goto err_request_res_io; -+ -+ cf->socket.io_offset = cf->res_io.start; -+ -+ if (cf->detect_pin >= 0) { -+ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq, -+ IRQF_SHARED, "cf_detect", cf); -+ if (ret) { -+ debug(cf, 1, -+ "failed to request cf_detect interrupt\n"); -+ goto err_detect_irq; -+ } -+ } -+ -+ cf->present = at32_cf_present(cf); -+ -+ /* Setup SMC timings */ -+ smc_set_timing(&cf->smc, &at32_cf_timing); -+ -+ cf->smc.bus_width = 2; -+ cf->smc.nrd_controlled = 1; -+ cf->smc.nwe_controlled = 1; -+ cf->smc.nwait_mode = 0; -+ cf->smc.byte_write = 0; -+ cf->smc.tdf_cycles = 8; -+ cf->smc.tdf_mode = 0; -+ -+ ret = smc_set_configuration(cf->cf_cs, &cf->smc); -+ if (ret) { -+ debug(cf, 1, "failed to configure SMC\n", ret); -+ goto err_smc; -+ } -+ -+ ret = pcmcia_register_socket(&cf->socket); -+ if (ret) { -+ debug(cf, 1, "failed to register socket: %d\n", ret); -+ goto err_register_socket; -+ } -+ -+ if (cf->reset_pin >= 0) -+ gpio_direction_output(cf->reset_pin, 0); -+ -+ platform_set_drvdata(pdev, cf); -+ -+ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n", -+ (unsigned long)res_skt->start); -+ -+ return 0; -+ -+err_register_socket: -+err_smc: -+ if (cf->detect_pin >= 0) -+ free_irq(gpio_to_irq(cf->detect_pin), cf); -+err_detect_irq: -+ release_resource(&cf->res_io); -+err_request_res_io: -+ release_resource(&cf->res_mem); -+err_request_res_mem: -+ release_resource(&cf->res_attr); -+err_request_res_attr: -+ if (cf->vcc_pin >= 0) -+ gpio_free(cf->vcc_pin); -+ if (cf->reset_pin >= 0) -+ gpio_free(cf->reset_pin); -+ if (cf->detect_pin >= 0) -+ gpio_free(cf->detect_pin); -+ kfree(cf); -+ -+ return ret; -+} -+ -+static int __exit at32_cf_remove(struct platform_device *pdev) -+{ -+ struct at32_cf_socket *cf = platform_get_drvdata(pdev); -+ -+ pcmcia_unregister_socket(&cf->socket); -+ if (cf->detect_pin >= 0) { -+ free_irq(gpio_to_irq(cf->detect_pin), cf); -+ gpio_free(cf->detect_pin); -+ } -+ if (cf->vcc_pin >= 0) -+ gpio_free(cf->vcc_pin); -+ if (cf->reset_pin >= 0) -+ gpio_free(cf->reset_pin); -+ -+ release_resource(&cf->res_io); -+ release_resource(&cf->res_mem); -+ release_resource(&cf->res_attr); -+ kfree(cf); -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+static struct platform_driver at32_cf_driver = { -+ .remove = __exit_p(at32_cf_remove), -+ .driver = { -+ .name = "at32_cf", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init at32_cf_init(void) -+{ -+ int ret; -+ -+ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe); -+ if (ret) -+ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret); -+ return ret; -+} -+ -+static void __exit at32_cf_exit(void) -+{ -+ platform_driver_unregister(&at32_cf_driver); -+} -+ -+module_init(at32_cf_init); -+module_exit(at32_cf_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface"); -+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); -diff -Nrup linux-2.6.24/drivers/pcmcia/Kconfig linux-avr32/drivers/pcmcia/Kconfig ---- linux-2.6.24/drivers/pcmcia/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/pcmcia/Kconfig 2008-02-01 14:51:42.000000000 -0500 -@@ -276,6 +276,13 @@ config ELECTRA_CF - Say Y here to support the CompactFlash controller on the - PA Semi Electra eval board. - -+config AT32_CF -+ tristate "AT32AP CompactFlash Controller" -+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP -+ help -+ Say Y here to support the CompactFlash controller on AT32 chips. -+ Or choose M to compile the driver as a module named "at32_cf". -+ - config PCCARD_NONSTATIC - tristate - -diff -Nrup linux-2.6.24/drivers/pcmcia/Makefile linux-avr32/drivers/pcmcia/Makefile ---- linux-2.6.24/drivers/pcmcia/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/pcmcia/Makefile 2008-02-01 14:51:42.000000000 -0500 -@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417 - obj-$(CONFIG_OMAP_CF) += omap_cf.o - obj-$(CONFIG_AT91_CF) += at91_cf.o - obj-$(CONFIG_ELECTRA_CF) += electra_cf.o -+obj-$(CONFIG_AT32_CF) += at32_cf.o - - sa11xx_core-y += soc_common.o sa11xx_base.o - pxa2xx_core-y += soc_common.o pxa2xx_base.o -diff -Nrup linux-2.6.24/drivers/spi/atmel_spi.c linux-avr32/drivers/spi/atmel_spi.c ---- linux-2.6.24/drivers/spi/atmel_spi.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/spi/atmel_spi.c 2008-02-01 14:51:43.000000000 -0500 -@@ -51,7 +51,9 @@ struct atmel_spi { - u8 stopping; - struct list_head queue; - struct spi_transfer *current_transfer; -- unsigned long remaining_bytes; -+ unsigned long current_remaining_bytes; -+ struct spi_transfer *next_transfer; -+ unsigned long next_remaining_bytes; - - void *buffer; - dma_addr_t buffer_dma; -@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_s - gpio_set_value(gpio, !active); - } - -+static inline int atmel_spi_xfer_is_last(struct spi_message *msg, -+ struct spi_transfer *xfer) -+{ -+ return msg->transfers.prev == &xfer->transfer_list; -+} -+ -+static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) -+{ -+ return xfer->delay_usecs == 0 && !xfer->cs_change; -+} -+ -+static void atmel_spi_next_xfer_data(struct spi_master *master, -+ struct spi_transfer *xfer, -+ dma_addr_t *tx_dma, -+ dma_addr_t *rx_dma, -+ u32 *plen) -+{ -+ struct atmel_spi *as = spi_master_get_devdata(master); -+ u32 len = *plen; -+ -+ /* use scratch buffer only when rx or tx data is unspecified */ -+ if (xfer->rx_buf) -+ *rx_dma = xfer->rx_dma + xfer->len - len; -+ else { -+ *rx_dma = as->buffer_dma; -+ if (len > BUFFER_SIZE) -+ len = BUFFER_SIZE; -+ } -+ if (xfer->tx_buf) -+ *tx_dma = xfer->tx_dma + xfer->len - len; -+ else { -+ *tx_dma = as->buffer_dma; -+ if (len > BUFFER_SIZE) -+ len = BUFFER_SIZE; -+ memset(as->buffer, 0, len); -+ dma_sync_single_for_device(&as->pdev->dev, -+ as->buffer_dma, len, DMA_TO_DEVICE); -+ } -+ -+ *plen = len; -+} -+ - /* - * Submit next transfer for DMA. - * lock is held, spi irq is blocked -@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct s - { - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_transfer *xfer; -- u32 len; -+ u32 len, remaining, total; - dma_addr_t tx_dma, rx_dma; - -- xfer = as->current_transfer; -- if (!xfer || as->remaining_bytes == 0) { -- if (xfer) -- xfer = list_entry(xfer->transfer_list.next, -- struct spi_transfer, transfer_list); -- else -- xfer = list_entry(msg->transfers.next, -- struct spi_transfer, transfer_list); -- as->remaining_bytes = xfer->len; -- as->current_transfer = xfer; -+ if (!as->current_transfer) -+ xfer = list_entry(msg->transfers.next, -+ struct spi_transfer, transfer_list); -+ else if (!as->next_transfer) -+ xfer = list_entry(as->current_transfer->transfer_list.next, -+ struct spi_transfer, transfer_list); -+ else -+ xfer = NULL; -+ -+ if (xfer) { -+ len = xfer->len; -+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); -+ remaining = xfer->len - len; -+ -+ spi_writel(as, RPR, rx_dma); -+ spi_writel(as, TPR, tx_dma); -+ -+ if (msg->spi->bits_per_word > 8) -+ len >>= 1; -+ spi_writel(as, RCR, len); -+ spi_writel(as, TCR, len); -+ -+ dev_dbg(&msg->spi->dev, -+ " start xfer %p: len %u tx %p/%08x rx %p/%08x\n", -+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, -+ xfer->rx_buf, xfer->rx_dma); -+ } else { -+ xfer = as->next_transfer; -+ remaining = as->next_remaining_bytes; - } - -- len = as->remaining_bytes; -+ as->current_transfer = xfer; -+ as->current_remaining_bytes = remaining; - -- tx_dma = xfer->tx_dma + xfer->len - len; -- rx_dma = xfer->rx_dma + xfer->len - len; -+ if (remaining > 0) -+ len = remaining; -+ else if (!atmel_spi_xfer_is_last(msg, xfer) -+ && atmel_spi_xfer_can_be_chained(xfer)) { -+ xfer = list_entry(xfer->transfer_list.next, -+ struct spi_transfer, transfer_list); -+ len = xfer->len; -+ } else -+ xfer = NULL; - -- /* use scratch buffer only when rx or tx data is unspecified */ -- if (!xfer->rx_buf) { -- rx_dma = as->buffer_dma; -- if (len > BUFFER_SIZE) -- len = BUFFER_SIZE; -- } -- if (!xfer->tx_buf) { -- tx_dma = as->buffer_dma; -- if (len > BUFFER_SIZE) -- len = BUFFER_SIZE; -- memset(as->buffer, 0, len); -- dma_sync_single_for_device(&as->pdev->dev, -- as->buffer_dma, len, DMA_TO_DEVICE); -- } -+ as->next_transfer = xfer; - -- spi_writel(as, RPR, rx_dma); -- spi_writel(as, TPR, tx_dma); -+ if (xfer) { -+ total = len; -+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); -+ as->next_remaining_bytes = total - len; -+ -+ spi_writel(as, RNPR, rx_dma); -+ spi_writel(as, TNPR, tx_dma); -+ -+ if (msg->spi->bits_per_word > 8) -+ len >>= 1; -+ spi_writel(as, RNCR, len); -+ spi_writel(as, TNCR, len); -+ -+ dev_dbg(&msg->spi->dev, -+ " next xfer %p: len %u tx %p/%08x rx %p/%08x\n", -+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, -+ xfer->rx_buf, xfer->rx_dma); -+ } else { -+ spi_writel(as, RNCR, 0); -+ spi_writel(as, TNCR, 0); -+ } - -- as->remaining_bytes -= len; -- if (msg->spi->bits_per_word > 8) -- len >>= 1; -- -- /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer" -- * mechanism might help avoid the IRQ latency between transfers -- * (and improve the nCS0 errata handling on at91rm9200 chips) -- * -- * We're also waiting for ENDRX before we start the next -+ /* REVISIT: We're waiting for ENDRX before we start the next - * transfer because we need to handle some difficult timing - * issues otherwise. If we wait for ENDTX in one transfer and - * then starts waiting for ENDRX in the next, it's difficult -@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct s - * - * It should be doable, though. Just not now... - */ -- spi_writel(as, TNCR, 0); -- spi_writel(as, RNCR, 0); - spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); -- -- dev_dbg(&msg->spi->dev, -- " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n", -- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, -- xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR)); -- -- spi_writel(as, RCR, len); -- spi_writel(as, TCR, len); - spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); - } - -@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *ma - spin_lock(&as->lock); - - as->current_transfer = NULL; -+ as->next_transfer = NULL; - - /* continue if needed */ - if (list_empty(&as->queue) || as->stopping) -@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_i - - spi_writel(as, IDR, pending); - -- if (as->remaining_bytes == 0) { -+ if (as->current_remaining_bytes == 0) { - msg->actual_length += xfer->len; - - if (!msg->is_dma_mapped) -@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_i - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - -- if (msg->transfers.prev == &xfer->transfer_list) { -+ if (atmel_spi_xfer_is_last(msg, xfer)) { - /* report completed message */ - atmel_spi_msg_done(master, as, msg, 0, - xfer->cs_change); -@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_de - if (!(spi->mode & SPI_CPHA)) - csr |= SPI_BIT(NCPHA); - -- /* TODO: DLYBS and DLYBCT */ -- csr |= SPI_BF(DLYBS, 10); -- csr |= SPI_BF(DLYBCT, 10); -+ /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs. -+ * -+ * DLYBCT would add delays between words, slowing down transfers. -+ * It could potentially be useful to cope with DMA bottlenecks, but -+ * in those cases it's probably best to just use a lower bitrate. -+ */ -+ csr |= SPI_BF(DLYBS, 0); -+ csr |= SPI_BF(DLYBCT, 0); - - /* chipselect must have been muxed as GPIO (e.g. in board setup) */ - npcs_pin = (unsigned int)spi->controller_data; -diff -Nrup linux-2.6.24/drivers/video/atmel_lcdfb.c linux-avr32/drivers/video/atmel_lcdfb.c ---- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/video/atmel_lcdfb.c 2008-02-01 14:51:44.000000000 -0500 -@@ -37,7 +37,9 @@ - #endif - - #if defined(CONFIG_ARCH_AT91) --#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT -+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ -+ | FBINFO_PARTIAL_PAN_OK \ -+ | FBINFO_HWACCEL_YPAN) - - static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, - struct fb_var_screeninfo *var) -@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lc - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_TRUECOLOR, - .xpanstep = 0, -- .ypanstep = 0, -+ .ypanstep = 1, - .ywrapstep = 0, - .accel = FB_ACCEL_NONE, - }; -@@ -148,6 +150,8 @@ static int atmel_lcdfb_alloc_video_memor - return -ENOMEM; - } - -+ memset(info->screen_base, 0, info->fix.smem_len); -+ - return 0; - } - -@@ -203,6 +207,26 @@ static int atmel_lcdfb_check_var(struct - var->transp.offset = var->transp.length = 0; - var->xoffset = var->yoffset = 0; - -+ /* Saturate vertical and horizontal timings at maximum values */ -+ var->vsync_len = min_t(u32, var->vsync_len, -+ (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1); -+ var->upper_margin = min_t(u32, var->upper_margin, -+ ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET); -+ var->lower_margin = min_t(u32, var->lower_margin, -+ ATMEL_LCDC_VFP); -+ var->right_margin = min_t(u32, var->right_margin, -+ (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1); -+ var->hsync_len = min_t(u32, var->hsync_len, -+ (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1); -+ var->left_margin = min_t(u32, var->left_margin, -+ ATMEL_LCDC_HBP + 1); -+ -+ /* Some parameters can't be zero */ -+ var->vsync_len = max_t(u32, var->vsync_len, 1); -+ var->right_margin = max_t(u32, var->right_margin, 1); -+ var->hsync_len = max_t(u32, var->hsync_len, 1); -+ var->left_margin = max_t(u32, var->left_margin, 1); -+ - switch (var->bits_per_pixel) { - case 1: - case 2: -@@ -516,7 +540,6 @@ static int __init atmel_lcdfb_init_fbinf - struct fb_info *info = sinfo->info; - int ret = 0; - -- memset_io(info->screen_base, 0, info->fix.smem_len); - info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; - - dev_info(info->device, -@@ -645,6 +668,11 @@ static int __init atmel_lcdfb_probe(stru - info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); - if (!info->screen_base) - goto release_intmem; -+ -+ /* -+ * Don't clear the framebuffer -- someone may have set -+ * up a splash image. -+ */ - } else { - /* alocate memory buffer */ - ret = atmel_lcdfb_alloc_video_memory(sinfo); -diff -Nrup linux-2.6.24/drivers/video/console/Kconfig linux-avr32/drivers/video/console/Kconfig ---- linux-2.6.24/drivers/video/console/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/video/console/Kconfig 2008-02-01 14:51:44.000000000 -0500 -@@ -6,7 +6,7 @@ menu "Console display driver support" - - config VGA_CONSOLE - bool "VGA text console" if EMBEDDED || !X86 -- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN -+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 - default y - help - Saying Y here will allow you to use Linux in text mode through a -diff -Nrup linux-2.6.24/drivers/watchdog/Kconfig linux-avr32/drivers/watchdog/Kconfig ---- linux-2.6.24/drivers/watchdog/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/drivers/watchdog/Kconfig 2008-02-01 14:51:44.000000000 -0500 -@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG - - config AT32AP700X_WDT - tristate "AT32AP700x watchdog" -- depends on CPU_AT32AP7000 -+ depends on CPU_AT32AP700X - help - Watchdog timer embedded into AT32AP700x devices. This will reboot - your system when the timeout is reached. -diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h 1969-12-31 19:00:00.000000000 -0500 -@@ -1,35 +0,0 @@ --/* -- * Pin definitions for AT32AP7000. -- * -- * Copyright (C) 2006 Atmel Corporation -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- */ --#ifndef __ASM_ARCH_AT32AP7000_H__ --#define __ASM_ARCH_AT32AP7000_H__ -- --#define GPIO_PERIPH_A 0 --#define GPIO_PERIPH_B 1 -- --#define NR_GPIO_CONTROLLERS 4 -- --/* -- * Pin numbers identifying specific GPIO pins on the chip. They can -- * also be converted to IRQ numbers by passing them through -- * gpio_to_irq(). -- */ --#define GPIO_PIOA_BASE (0) --#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) --#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) --#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) --#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) -- --#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) --#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) --#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) --#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) --#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) -- --#endif /* __ASM_ARCH_AT32AP7000_H__ */ -diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h 2008-02-01 14:51:45.000000000 -0500 -@@ -0,0 +1,35 @@ -+/* -+ * Pin definitions for AT32AP7000. -+ * -+ * Copyright (C) 2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __ASM_ARCH_AT32AP700X_H__ -+#define __ASM_ARCH_AT32AP700X_H__ -+ -+#define GPIO_PERIPH_A 0 -+#define GPIO_PERIPH_B 1 -+ -+#define NR_GPIO_CONTROLLERS 4 -+ -+/* -+ * Pin numbers identifying specific GPIO pins on the chip. They can -+ * also be converted to IRQ numbers by passing them through -+ * gpio_to_irq(). -+ */ -+#define GPIO_PIOA_BASE (0) -+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) -+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) -+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) -+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) -+ -+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) -+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) -+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) -+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) -+#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) -+ -+#endif /* __ASM_ARCH_AT32AP700X_H__ */ -diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/board.h linux-avr32/include/asm-avr32/arch-at32ap/board.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/board.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/arch-at32ap/board.h 2008-02-01 14:51:45.000000000 -0500 -@@ -51,6 +51,9 @@ struct platform_device * - at32_add_device_ide(unsigned int id, unsigned int extint, - struct ide_platform_data *data); - -+/* mask says which PWM channels to mux */ -+struct platform_device *at32_add_device_pwm(u32 mask); -+ - /* depending on what's hooked up, not all SSC pins will be used */ - #define ATMEL_SSC_TK 0x01 - #define ATMEL_SSC_TF 0x02 -@@ -66,7 +69,13 @@ struct platform_device * - at32_add_device_ssc(unsigned int id, unsigned int flags); - - struct platform_device *at32_add_device_twi(unsigned int id); --struct platform_device *at32_add_device_mci(unsigned int id); -+ -+struct mci_platform_data { -+ int detect_pin; -+ int wp_pin; -+}; -+struct platform_device * -+at32_add_device_mci(unsigned int id, struct mci_platform_data *data); - struct platform_device *at32_add_device_ac97c(unsigned int id); - struct platform_device *at32_add_device_abdac(unsigned int id); - -diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-avr32/include/asm-avr32/arch-at32ap/cpu.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/arch-at32ap/cpu.h 2008-02-01 14:51:45.000000000 -0500 -@@ -14,7 +14,7 @@ - * Only AT32AP7000 is defined for now. We can identify the specific - * chip at runtime, but I'm not sure if it's really worth it. - */ --#ifdef CONFIG_CPU_AT32AP7000 -+#ifdef CONFIG_CPU_AT32AP700X - # define cpu_is_at32ap7000() (1) - #else - # define cpu_is_at32ap7000() (0) -diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/io.h linux-avr32/include/asm-avr32/arch-at32ap/io.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/io.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/arch-at32ap/io.h 2008-02-01 14:51:45.000000000 -0500 -@@ -4,7 +4,7 @@ - /* For "bizarre" halfword swapping */ - #include <linux/byteorder/swabb.h> - --#if defined(CONFIG_AP7000_32_BIT_SMC) -+#if defined(CONFIG_AP700X_32_BIT_SMC) - # define __swizzle_addr_b(addr) (addr ^ 3UL) - # define __swizzle_addr_w(addr) (addr ^ 2UL) - # define __swizzle_addr_l(addr) (addr) -@@ -14,7 +14,7 @@ - # define __mem_ioswabb(a, x) (x) - # define __mem_ioswabw(a, x) swab16(x) - # define __mem_ioswabl(a, x) swab32(x) --#elif defined(CONFIG_AP7000_16_BIT_SMC) -+#elif defined(CONFIG_AP700X_16_BIT_SMC) - # define __swizzle_addr_b(addr) (addr ^ 1UL) - # define __swizzle_addr_w(addr) (addr) - # define __swizzle_addr_l(addr) (addr) -diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h linux-avr32/include/asm-avr32/arch-at32ap/portmux.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/arch-at32ap/portmux.h 2008-02-01 14:51:45.000000000 -0500 -@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin - void at32_select_gpio(unsigned int pin, unsigned long flags); - void at32_reserve_pin(unsigned int pin); - -+#ifdef CONFIG_GPIO_DEV -+ -+/* Gang allocators and accessors; used by the GPIO /dev driver */ -+int at32_gpio_port_is_valid(unsigned int port); -+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask); -+void at32_deselect_pins(unsigned int port, u32 pins); -+ -+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins); -+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask); -+ -+#endif /* CONFIG_GPIO_DEV */ -+ - #endif /* __ASM_ARCH_PORTMUX_H__ */ -diff -Nrup linux-2.6.24/include/asm-avr32/dma-controller.h linux-avr32/include/asm-avr32/dma-controller.h ---- linux-2.6.24/include/asm-avr32/dma-controller.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/include/asm-avr32/dma-controller.h 2008-02-01 14:51:45.000000000 -0500 -@@ -0,0 +1,166 @@ -+/* -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __ASM_AVR32_DMA_CONTROLLER_H -+#define __ASM_AVR32_DMA_CONTROLLER_H -+ -+#include <linux/device.h> -+ -+#define DMA_DIR_MEM_TO_MEM 0x0000 -+#define DMA_DIR_MEM_TO_PERIPH 0x0001 -+#define DMA_DIR_PERIPH_TO_MEM 0x0002 -+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003 -+ -+#define DMA_WIDTH_8BIT 0 -+#define DMA_WIDTH_16BIT 1 -+#define DMA_WIDTH_32BIT 2 -+ -+struct dma_request { -+ struct dma_controller *dmac; -+ struct list_head list; -+ -+ unsigned short channel; -+ -+ void (*xfer_complete)(struct dma_request *req); -+ void (*block_complete)(struct dma_request *req); -+ void (*error)(struct dma_request *req); -+}; -+ -+struct dma_request_sg { -+ struct dma_request req; -+ -+ int nr_sg; -+ struct scatterlist *sg; -+ unsigned long block_size; -+ unsigned int nr_blocks; -+ -+ dma_addr_t data_reg; -+ unsigned short periph_id; -+ -+ unsigned char direction; -+ unsigned char width; -+}; -+#define to_dma_request_sg(_req) \ -+ container_of(_req, struct dma_request_sg, req) -+ -+struct dma_request_cyclic { -+ struct dma_request req; -+ -+ int periods; -+ unsigned long buffer_size; -+ -+ dma_addr_t buffer_start; -+ dma_addr_t data_reg; -+ -+ unsigned short periph_id; -+ unsigned char direction; -+ unsigned char width; -+ -+ void *dev_id; -+}; -+#define to_dma_request_cyclic(_req) \ -+ container_of(_req, struct dma_request_cyclic, req) -+ -+struct dma_request_memcpy { -+ struct dma_request req; -+ -+ dma_addr_t src_addr; -+ unsigned int src_width; -+ unsigned int src_stride; -+ -+ dma_addr_t dst_addr; -+ unsigned int dst_width; -+ unsigned int dst_stride; -+ -+ size_t length; -+ -+ unsigned short src_reverse:1; -+ unsigned short dst_reverse:1; -+}; -+#define to_dma_request_memcpy(_req) \ -+ container_of(_req, struct dma_request_memcpy, req) -+ -+struct dma_controller { -+ struct list_head list; -+ int id; -+ struct device *dev; -+ -+ int (*alloc_channel)(struct dma_controller *dmac); -+ void (*release_channel)(struct dma_controller *dmac, -+ int channel); -+ int (*prepare_request_sg)(struct dma_controller *dmac, -+ struct dma_request_sg *req); -+ int (*prepare_request_cyclic)(struct dma_controller *dmac, -+ struct dma_request_cyclic *req); -+ int (*prepare_request_memcpy)(struct dma_controller *dmac, -+ struct dma_request_memcpy *req); -+ int (*start_request)(struct dma_controller *dmac, -+ unsigned int channel); -+ int (*stop_request)(struct dma_controller *dmac, -+ unsigned int channel); -+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac, -+ unsigned int channel); -+}; -+ -+static inline int -+dma_alloc_channel(struct dma_controller *dmac) -+{ -+ return dmac->alloc_channel(dmac); -+} -+ -+static inline void -+dma_release_channel(struct dma_controller *dmac, int chan) -+{ -+ dmac->release_channel(dmac, chan); -+} -+ -+static inline int -+dma_prepare_request_sg(struct dma_controller *dmac, -+ struct dma_request_sg *req) -+{ -+ return dmac->prepare_request_sg(dmac, req); -+} -+ -+static inline int -+dma_prepare_request_cyclic(struct dma_controller *dmac, -+ struct dma_request_cyclic *req) -+{ -+ return dmac->prepare_request_cyclic(dmac, req); -+} -+ -+static inline int -+dma_prepare_request_memcpy(struct dma_controller *dmac, -+ struct dma_request_memcpy *req) -+{ -+ return dmac->prepare_request_memcpy(dmac, req); -+} -+ -+static inline int -+dma_start_request(struct dma_controller *dmac, -+ unsigned int channel) -+{ -+ return dmac->start_request(dmac, channel); -+} -+ -+static inline int -+dma_stop_request(struct dma_controller *dmac, -+ unsigned int channel) -+{ -+ return dmac->stop_request(dmac, channel); -+} -+ -+static inline dma_addr_t -+dma_get_current_pos(struct dma_controller *dmac, -+ unsigned int channel) -+{ -+ return dmac->get_current_pos(dmac, channel); -+} -+ -+extern int register_dma_controller(struct dma_controller *dmac); -+extern struct dma_controller *find_dma_controller(int id); -+ -+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */ -diff -Nrup linux-2.6.24/include/asm-avr32/irq.h linux-avr32/include/asm-avr32/irq.h ---- linux-2.6.24/include/asm-avr32/irq.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/irq.h 2008-02-01 14:51:45.000000000 -0500 -@@ -11,4 +11,9 @@ - - #define irq_canonicalize(i) (i) - -+#ifndef __ASSEMBLER__ -+int nmi_enable(void); -+void nmi_disable(void); -+#endif -+ - #endif /* __ASM_AVR32_IOCTLS_H */ -diff -Nrup linux-2.6.24/include/asm-avr32/kdebug.h linux-avr32/include/asm-avr32/kdebug.h ---- linux-2.6.24/include/asm-avr32/kdebug.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/kdebug.h 2008-02-01 14:51:45.000000000 -0500 -@@ -5,6 +5,7 @@ - enum die_val { - DIE_BREAKPOINT, - DIE_SSTEP, -+ DIE_NMI, - }; - - #endif /* __ASM_AVR32_KDEBUG_H */ -diff -Nrup linux-2.6.24/include/asm-avr32/ocd.h linux-avr32/include/asm-avr32/ocd.h ---- linux-2.6.24/include/asm-avr32/ocd.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/ocd.h 2008-02-01 14:51:45.000000000 -0500 -@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned - #define ocd_read(reg) __ocd_read(OCD_##reg) - #define ocd_write(reg, value) __ocd_write(OCD_##reg, value) - -+struct task_struct; -+ -+void ocd_enable(struct task_struct *child); -+void ocd_disable(struct task_struct *child); -+ - #endif /* !__ASSEMBLER__ */ - - #endif /* __ASM_AVR32_OCD_H */ -diff -Nrup linux-2.6.24/include/asm-avr32/processor.h linux-avr32/include/asm-avr32/processor.h ---- linux-2.6.24/include/asm-avr32/processor.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/processor.h 2008-02-01 14:51:45.000000000 -0500 -@@ -57,11 +57,25 @@ struct avr32_cpuinfo { - unsigned short cpu_revision; - enum tlb_config tlb_config; - unsigned long features; -+ u32 device_id; - - struct cache_info icache; - struct cache_info dcache; - }; - -+static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu) -+{ -+ return (cpu->device_id >> 1) & 0x7f; -+} -+static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu) -+{ -+ return (cpu->device_id >> 12) & 0xffff; -+} -+static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu) -+{ -+ return (cpu->device_id >> 28) & 0x0f; -+} -+ - extern struct avr32_cpuinfo boot_cpu_data; - - #ifdef CONFIG_SMP -diff -Nrup linux-2.6.24/include/asm-avr32/ptrace.h linux-avr32/include/asm-avr32/ptrace.h ---- linux-2.6.24/include/asm-avr32/ptrace.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/ptrace.h 2008-02-01 14:51:45.000000000 -0500 -@@ -121,7 +121,15 @@ struct pt_regs { - }; - - #ifdef __KERNEL__ --# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) -+ -+#include <asm/ocd.h> -+ -+#define arch_ptrace_attach(child) ocd_enable(child) -+ -+#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) -+#define instruction_pointer(regs) ((regs)->pc) -+#define profile_pc(regs) instruction_pointer(regs) -+ - extern void show_regs (struct pt_regs *); - - static __inline__ int valid_user_regs(struct pt_regs *regs) -@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(st - return 0; - } - --#define instruction_pointer(regs) ((regs)->pc) -- --#define profile_pc(regs) instruction_pointer(regs) - - #endif /* __KERNEL__ */ - -diff -Nrup linux-2.6.24/include/asm-avr32/thread_info.h linux-avr32/include/asm-avr32/thread_info.h ---- linux-2.6.24/include/asm-avr32/thread_info.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/asm-avr32/thread_info.h 2008-02-01 14:51:45.000000000 -0500 -@@ -88,6 +88,7 @@ static inline struct thread_info *curren - #define TIF_MEMDIE 6 - #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ - #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ -+#define TIF_DEBUG 30 /* debugging enabled */ - #define TIF_USERSPACE 31 /* true if FS sets userspace */ - - #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -diff -Nrup linux-2.6.24/include/linux/atmel_pwm.h linux-avr32/include/linux/atmel_pwm.h ---- linux-2.6.24/include/linux/atmel_pwm.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/include/linux/atmel_pwm.h 2008-02-01 14:51:47.000000000 -0500 -@@ -0,0 +1,70 @@ -+#ifndef __LINUX_ATMEL_PWM_H -+#define __LINUX_ATMEL_PWM_H -+ -+/** -+ * struct pwm_channel - driver handle to a PWM channel -+ * @regs: base of this channel's registers -+ * @index: number of this channel (0..31) -+ * @mck: base clock rate, which can be prescaled and maybe subdivided -+ * -+ * Drivers initialize a pwm_channel structure using pwm_channel_alloc(). -+ * Then they configure its clock rate (derived from MCK), alignment, -+ * polarity, and duty cycle by writing directly to the channel registers, -+ * before enabling the channel by calling pwm_channel_enable(). -+ * -+ * After emitting a PWM signal for the desired length of time, drivers -+ * may then pwm_channel_disable() or pwm_channel_free(). Both of these -+ * disable the channel, but when it's freed the IRQ is deconfigured and -+ * the channel must later be re-allocated and reconfigured. -+ * -+ * Note that if the period or duty cycle need to be changed while the -+ * PWM channel is operating, drivers must use the PWM_CUPD double buffer -+ * mechanism, either polling until they change or getting implicitly -+ * notified through a once-per-period interrupt handler. -+ */ -+struct pwm_channel { -+ void __iomem *regs; -+ unsigned index; -+ unsigned long mck; -+}; -+ -+extern int pwm_channel_alloc(int index, struct pwm_channel *ch); -+extern int pwm_channel_free(struct pwm_channel *ch); -+ -+extern int pwm_clk_alloc(unsigned prescale, unsigned div); -+extern void pwm_clk_free(unsigned clk); -+ -+extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled); -+ -+#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1) -+#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0) -+ -+/* periodic interrupts, mostly for CUPD changes to period or cycle */ -+extern int pwm_channel_handler(struct pwm_channel *ch, -+ void (*handler)(struct pwm_channel *ch)); -+ -+/* per-channel registers (banked at pwm_channel->regs) */ -+#define PWM_CMR 0x00 /* mode register */ -+#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */ -+#define PWM_CPR_CPOL (1 << 9) /* set: idle high */ -+#define PWM_CPR_CALG (1 << 8) /* set: center align */ -+#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */ -+#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */ -+#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */ -+#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */ -+#define PWM_CPRD 0x08 /* period (count up from zero) */ -+#define PWM_CCNT 0x0c /* counter (20 bits?) */ -+#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */ -+ -+static inline void -+pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val) -+{ -+ __raw_writel(val, pwmc->regs + offset); -+} -+ -+static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset) -+{ -+ return __raw_readl(pwmc->regs + offset); -+} -+ -+#endif /* __LINUX_ATMEL_PWM_H */ -diff -Nrup linux-2.6.24/include/video/atmel_lcdc.h linux-avr32/include/video/atmel_lcdc.h ---- linux-2.6.24/include/video/atmel_lcdc.h 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/include/video/atmel_lcdc.h 2008-02-01 14:51:47.000000000 -0500 -@@ -115,20 +115,20 @@ struct atmel_lcdfb_info { - #define ATMEL_LCDC_MEMOR_LITTLE (1 << 31) - - #define ATMEL_LCDC_TIM1 0x0808 --#define ATMEL_LCDC_VFP (0xff << 0) -+#define ATMEL_LCDC_VFP (0xffU << 0) - #define ATMEL_LCDC_VBP_OFFSET 8 --#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET) -+#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET) - #define ATMEL_LCDC_VPW_OFFSET 16 --#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET) -+#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET) - #define ATMEL_LCDC_VHDLY_OFFSET 24 --#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET) -+#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET) - - #define ATMEL_LCDC_TIM2 0x080c --#define ATMEL_LCDC_HBP (0xff << 0) -+#define ATMEL_LCDC_HBP (0xffU << 0) - #define ATMEL_LCDC_HPW_OFFSET 8 --#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET) -+#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET) - #define ATMEL_LCDC_HFP_OFFSET 21 --#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET) -+#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET) - - #define ATMEL_LCDC_LCDFRMCFG 0x0810 - #define ATMEL_LCDC_LINEVAL (0x7ff << 0) -diff -Nrup linux-2.6.24/kernel/ptrace.c linux-avr32/kernel/ptrace.c ---- linux-2.6.24/kernel/ptrace.c 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/kernel/ptrace.c 2008-02-01 14:51:47.000000000 -0500 -@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request, - lock_kernel(); - if (request == PTRACE_TRACEME) { - ret = ptrace_traceme(); -+ if (!ret) -+ arch_ptrace_attach(current); - goto out; - } - -diff -Nrup linux-2.6.24/sound/avr32/ac97c.c linux-avr32/sound/avr32/ac97c.c ---- linux-2.6.24/sound/avr32/ac97c.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/sound/avr32/ac97c.c 2008-02-01 14:51:48.000000000 -0500 -@@ -0,0 +1,914 @@ -+/* -+ * Driver for the Atmel AC97 controller -+ * -+ * Copyright (C) 2005-2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/mutex.h> -+#include <linux/io.h> -+ -+#include <sound/driver.h> -+#include <sound/core.h> -+#include <sound/initval.h> -+#include <sound/pcm.h> -+#include <sound/pcm_params.h> -+#include <sound/ac97_codec.h> -+#include <sound/memalloc.h> -+ -+#include <asm/dma-controller.h> -+ -+#include "ac97c.h" -+ -+/* Serialize access to opened */ -+static DEFINE_MUTEX(opened_mutex); -+ -+struct atmel_ac97_dma_info { -+ struct dma_request_cyclic req_tx; -+ struct dma_request_cyclic req_rx; -+ unsigned short rx_periph_id; -+ unsigned short tx_periph_id; -+}; -+ -+struct atmel_ac97 { -+ /* Serialize access to opened */ -+ spinlock_t lock; -+ void __iomem *regs; -+ struct snd_pcm_substream *playback_substream; -+ struct snd_pcm_substream *capture_substream; -+ struct snd_card *card; -+ struct snd_pcm *pcm; -+ struct snd_ac97 *ac97; -+ struct snd_ac97_bus *ac97_bus; -+ int opened; -+ int period; -+ u64 cur_format; -+ unsigned int cur_rate; -+ struct clk *mck; -+ struct platform_device *pdev; -+ struct atmel_ac97_dma_info dma; -+}; -+ -+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data) -+ -+#define ac97c_writel(chip, reg, val) \ -+ __raw_writel((val), (chip)->regs + AC97C_##reg) -+#define ac97c_readl(chip, reg) \ -+ __raw_readl((chip)->regs + AC97C_##reg) -+ -+/* -+ * PCM part -+ */ -+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = { -+ .info = (SNDRV_PCM_INFO_INTERLEAVED -+ | SNDRV_PCM_INFO_MMAP -+ | SNDRV_PCM_INFO_MMAP_VALID -+ | SNDRV_PCM_INFO_BLOCK_TRANSFER -+ | SNDRV_PCM_INFO_JOINT_DUPLEX), -+ .formats = (SNDRV_PCM_FMTBIT_S16_BE -+ | SNDRV_PCM_FMTBIT_S16_LE), -+ .rates = (SNDRV_PCM_RATE_CONTINUOUS), -+ .rate_min = 4000, -+ .rate_max = 48000, -+ .channels_min = 1, -+ .channels_max = 6, -+ .buffer_bytes_max = 64*1024, -+ .period_bytes_min = 512, -+ .period_bytes_max = 4095, -+ .periods_min = 8, -+ .periods_max = 1024, -+}; -+ -+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = { -+ .info = (SNDRV_PCM_INFO_INTERLEAVED -+ | SNDRV_PCM_INFO_MMAP -+ | SNDRV_PCM_INFO_MMAP_VALID -+ | SNDRV_PCM_INFO_BLOCK_TRANSFER -+ | SNDRV_PCM_INFO_JOINT_DUPLEX), -+ .formats = (SNDRV_PCM_FMTBIT_S16_BE -+ | SNDRV_PCM_FMTBIT_S16_LE), -+ .rates = (SNDRV_PCM_RATE_CONTINUOUS), -+ .rate_min = 4000, -+ .rate_max = 48000, -+ .channels_min = 1, -+ .channels_max = 2, -+ .buffer_bytes_max = 64*1024, -+ .period_bytes_min = 512, -+ .period_bytes_max = 4095, -+ .periods_min = 8, -+ .periods_max = 1024, -+}; -+ -+/* -+ * PCM functions -+ */ -+static int -+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ -+ mutex_lock(&opened_mutex); -+ chip->opened++; -+ runtime->hw = snd_atmel_ac97_playback_hw; -+ if (chip->cur_rate) { -+ runtime->hw.rate_min = chip->cur_rate; -+ runtime->hw.rate_max = chip->cur_rate; -+ } -+ if (chip->cur_format) -+ runtime->hw.formats = (1ULL << chip->cur_format); -+ mutex_unlock(&opened_mutex); -+ chip->playback_substream = substream; -+ chip->period = 0; -+ return 0; -+} -+ -+static int -+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ -+ mutex_lock(&opened_mutex); -+ chip->opened++; -+ runtime->hw = snd_atmel_ac97_capture_hw; -+ if (chip->cur_rate) { -+ runtime->hw.rate_min = chip->cur_rate; -+ runtime->hw.rate_max = chip->cur_rate; -+ } -+ if (chip->cur_format) -+ runtime->hw.formats = (1ULL << chip->cur_format); -+ mutex_unlock(&opened_mutex); -+ chip->capture_substream = substream; -+ chip->period = 0; -+ return 0; -+} -+ -+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ mutex_lock(&opened_mutex); -+ chip->opened--; -+ if (!chip->opened) { -+ chip->cur_rate = 0; -+ chip->cur_format = 0; -+ } -+ mutex_unlock(&opened_mutex); -+ return 0; -+} -+ -+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ mutex_lock(&opened_mutex); -+ chip->opened--; -+ if (!chip->opened) { -+ chip->cur_rate = 0; -+ chip->cur_format = 0; -+ } -+ mutex_unlock(&opened_mutex); -+ return 0; -+} -+ -+static int -+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *hw_params) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ int err; -+ -+ err = snd_pcm_lib_malloc_pages(substream, -+ params_buffer_bytes(hw_params)); -+ if (err < 0) -+ return err; -+ -+ /* Set restrictions to params */ -+ mutex_lock(&opened_mutex); -+ chip->cur_rate = params_rate(hw_params); -+ chip->cur_format = params_format(hw_params); -+ mutex_unlock(&opened_mutex); -+ -+ return 0; -+} -+ -+static int -+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *hw_params) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ int err; -+ -+ err = snd_pcm_lib_malloc_pages(substream, -+ params_buffer_bytes(hw_params)); -+ if (err < 0) -+ return err; -+ -+ /* Set restrictions to params */ -+ mutex_lock(&opened_mutex); -+ chip->cur_rate = params_rate(hw_params); -+ chip->cur_format = params_format(hw_params); -+ mutex_unlock(&opened_mutex); -+ -+ return 0; -+} -+ -+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream) -+{ -+ return snd_pcm_lib_free_pages(substream); -+} -+ -+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream) -+{ -+ -+ return snd_pcm_lib_free_pages(substream); -+} -+ -+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ struct platform_device *pdev = chip->pdev; -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ int block_size = frames_to_bytes(runtime, runtime->period_size); -+ unsigned long word = 0; -+ unsigned long buffer_size = 0; -+ -+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr, -+ block_size * 2, DMA_TO_DEVICE); -+ -+ /* Assign slots to channels */ -+ switch (substream->runtime->channels) { -+ case 1: -+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A); -+ break; -+ case 2: -+ /* Assign Left and Right slot to Channel A */ -+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A) -+ | AC97C_CH_ASSIGN(PCM_RIGHT, A); -+ break; -+ default: -+ /* TODO: support more than two channels */ -+ return -EINVAL; -+ break; -+ } -+ ac97c_writel(chip, OCA, word); -+ -+ /* Configure sample format and size */ -+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16; -+ -+ switch (runtime->format) { -+ case SNDRV_PCM_FORMAT_S16_LE: -+ word |= AC97C_CMR_CEM_LITTLE; -+ break; -+ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */ -+ default: -+ word &= ~AC97C_CMR_CEM_LITTLE; -+ break; -+ } -+ -+ ac97c_writel(chip, CAMR, word); -+ -+ /* Set variable rate if needed */ -+ if (runtime->rate != 48000) { -+ word = ac97c_readl(chip, MR); -+ word |= AC97C_MR_VRA; -+ ac97c_writel(chip, MR, word); -+ } else { -+ /* Clear Variable Rate Bit */ -+ word = ac97c_readl(chip, MR); -+ word &= ~AC97C_MR_VRA; -+ ac97c_writel(chip, MR, word); -+ } -+ -+ /* Set rate */ -+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate); -+ -+ buffer_size = frames_to_bytes(runtime, runtime->period_size) * -+ runtime->periods; -+ -+ chip->dma.req_tx.buffer_size = buffer_size; -+ chip->dma.req_tx.periods = runtime->periods; -+ -+ BUG_ON(chip->dma.req_tx.buffer_size != -+ (chip->dma.req_tx.periods * -+ frames_to_bytes(runtime, runtime->period_size))); -+ -+ chip->dma.req_tx.buffer_start = runtime->dma_addr; -+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2); -+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id; -+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH; -+ chip->dma.req_tx.width = DMA_WIDTH_16BIT; -+ chip->dma.req_tx.dev_id = chip; -+ -+ return 0; -+} -+ -+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ struct platform_device *pdev = chip->pdev; -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ int block_size = frames_to_bytes(runtime, runtime->period_size); -+ unsigned long word = 0; -+ unsigned long buffer_size = 0; -+ -+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr, -+ block_size * 2, DMA_FROM_DEVICE); -+ -+ /* Assign slots to channels */ -+ switch (substream->runtime->channels) { -+ case 1: -+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A); -+ break; -+ case 2: -+ /* Assign Left and Right slot to Channel A */ -+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A) -+ | AC97C_CH_ASSIGN(PCM_RIGHT, A); -+ break; -+ default: -+ /* TODO: support more than two channels */ -+ return -EINVAL; -+ break; -+ } -+ ac97c_writel(chip, ICA, word); -+ -+ /* Configure sample format and size */ -+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16; -+ -+ switch (runtime->format) { -+ case SNDRV_PCM_FORMAT_S16_LE: -+ word |= AC97C_CMR_CEM_LITTLE; -+ break; -+ case SNDRV_PCM_FORMAT_S16_BE: -+ default: -+ word &= ~(AC97C_CMR_CEM_LITTLE); -+ break; -+ } -+ -+ ac97c_writel(chip, CAMR, word); -+ -+ /* Set variable rate if needed */ -+ if (runtime->rate != 48000) { -+ word = ac97c_readl(chip, MR); -+ word |= AC97C_MR_VRA; -+ ac97c_writel(chip, MR, word); -+ } else { -+ /* Clear Variable Rate Bit */ -+ word = ac97c_readl(chip, MR); -+ word &= ~(AC97C_MR_VRA); -+ ac97c_writel(chip, MR, word); -+ } -+ -+ /* Set rate */ -+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate); -+ -+ buffer_size = frames_to_bytes(runtime, runtime->period_size) * -+ runtime->periods; -+ -+ chip->dma.req_rx.buffer_size = buffer_size; -+ chip->dma.req_rx.periods = runtime->periods; -+ -+ BUG_ON(chip->dma.req_rx.buffer_size != -+ (chip->dma.req_rx.periods * -+ frames_to_bytes(runtime, runtime->period_size))); -+ -+ chip->dma.req_rx.buffer_start = runtime->dma_addr; -+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2); -+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id; -+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM; -+ chip->dma.req_rx.width = DMA_WIDTH_16BIT; -+ chip->dma.req_rx.dev_id = chip; -+ -+ return 0; -+} -+ -+ static int -+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ unsigned long camr; -+ int flags, err = 0; -+ -+ spin_lock_irqsave(&chip->lock, flags); -+ camr = ac97c_readl(chip, CAMR); -+ -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac, -+ &chip->dma.req_tx); -+ dma_start_request(chip->dma.req_tx.req.dmac, -+ chip->dma.req_tx.req.channel); -+ camr |= AC97C_CMR_CENA; -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ err = dma_stop_request(chip->dma.req_tx.req.dmac, -+ chip->dma.req_tx.req.channel); -+ if (chip->opened <= 1) -+ camr &= ~AC97C_CMR_CENA; -+ break; -+ default: -+ err = -EINVAL; -+ break; -+ } -+ -+ ac97c_writel(chip, CAMR, camr); -+ -+ spin_unlock_irqrestore(&chip->lock, flags); -+ return err; -+} -+ -+ static int -+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ unsigned long camr; -+ int flags, err = 0; -+ -+ spin_lock_irqsave(&chip->lock, flags); -+ camr = ac97c_readl(chip, CAMR); -+ -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac, -+ &chip->dma.req_rx); -+ dma_start_request(chip->dma.req_rx.req.dmac, -+ chip->dma.req_rx.req.channel); -+ camr |= AC97C_CMR_CENA; -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ err = dma_stop_request(chip->dma.req_rx.req.dmac, -+ chip->dma.req_rx.req.channel); -+ mutex_lock(&opened_mutex); -+ if (chip->opened <= 1) -+ camr &= ~AC97C_CMR_CENA; -+ mutex_unlock(&opened_mutex); -+ break; -+ default: -+ err = -EINVAL; -+ break; -+ } -+ -+ ac97c_writel(chip, CAMR, camr); -+ -+ spin_unlock_irqrestore(&chip->lock, flags); -+ return err; -+} -+ -+ static snd_pcm_uframes_t -+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ snd_pcm_uframes_t pos; -+ unsigned long bytes; -+ -+ bytes = (dma_get_current_pos -+ (chip->dma.req_tx.req.dmac, -+ chip->dma.req_tx.req.channel) - runtime->dma_addr); -+ pos = bytes_to_frames(runtime, bytes); -+ if (pos >= runtime->buffer_size) -+ pos -= runtime->buffer_size; -+ -+ return pos; -+} -+ -+ static snd_pcm_uframes_t -+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream) -+{ -+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream); -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ snd_pcm_uframes_t pos; -+ unsigned long bytes; -+ -+ bytes = (dma_get_current_pos -+ (chip->dma.req_rx.req.dmac, -+ chip->dma.req_rx.req.channel) -+ - runtime->dma_addr); -+ pos = bytes_to_frames(runtime, bytes); -+ if (pos >= runtime->buffer_size) -+ pos -= runtime->buffer_size; -+ -+ -+ return pos; -+} -+ -+static struct snd_pcm_ops atmel_ac97_playback_ops = { -+ .open = snd_atmel_ac97_playback_open, -+ .close = snd_atmel_ac97_playback_close, -+ .ioctl = snd_pcm_lib_ioctl, -+ .hw_params = snd_atmel_ac97_playback_hw_params, -+ .hw_free = snd_atmel_ac97_playback_hw_free, -+ .prepare = snd_atmel_ac97_playback_prepare, -+ .trigger = snd_atmel_ac97_playback_trigger, -+ .pointer = snd_atmel_ac97_playback_pointer, -+}; -+ -+static struct snd_pcm_ops atmel_ac97_capture_ops = { -+ .open = snd_atmel_ac97_capture_open, -+ .close = snd_atmel_ac97_capture_close, -+ .ioctl = snd_pcm_lib_ioctl, -+ .hw_params = snd_atmel_ac97_capture_hw_params, -+ .hw_free = snd_atmel_ac97_capture_hw_free, -+ .prepare = snd_atmel_ac97_capture_prepare, -+ .trigger = snd_atmel_ac97_capture_trigger, -+ .pointer = snd_atmel_ac97_capture_pointer, -+}; -+ -+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = { -+ /* Playback */ -+ { -+ .exclusive = 1, -+ .r = { { -+ .slots = ((1 << AC97_SLOT_PCM_LEFT) -+ | (1 << AC97_SLOT_PCM_RIGHT) -+ | (1 << AC97_SLOT_PCM_CENTER) -+ | (1 << AC97_SLOT_PCM_SLEFT) -+ | (1 << AC97_SLOT_PCM_SRIGHT) -+ | (1 << AC97_SLOT_LFE)), -+ } } -+ }, -+ /* PCM in */ -+ { -+ .stream = 1, -+ .exclusive = 1, -+ .r = { { -+ .slots = ((1 << AC97_SLOT_PCM_LEFT) -+ | (1 << AC97_SLOT_PCM_RIGHT)), -+ } } -+ }, -+ /* Mic in */ -+ { -+ .stream = 1, -+ .exclusive = 1, -+ .r = { { -+ .slots = (1<<AC97_SLOT_MIC), -+ } } -+ }, -+}; -+ -+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip) -+{ -+ struct snd_pcm *pcm; -+ int err; -+ -+ err = snd_ac97_pcm_assign(chip->ac97_bus, -+ ARRAY_SIZE(atmel_ac97_pcm_defs), -+ atmel_ac97_pcm_defs); -+ if (err) -+ return err; -+ -+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm); -+ if (err) -+ return err; -+ -+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -+ &atmel_ac97_playback_ops); -+ -+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, -+ &atmel_ac97_capture_ops); -+ -+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -+ &chip->pdev->dev, -+ 128 * 1024, 128 * 1024); -+ -+ pcm->private_data = chip; -+ pcm->info_flags = 0; -+ strcpy(pcm->name, "Atmel-AC97"); -+ chip->pcm = pcm; -+ -+ return 0; -+} -+ -+/* -+ * Mixer part. -+ */ -+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip) -+{ -+ int err; -+ struct snd_ac97_template template; -+ -+ memset(&template, 0, sizeof(template)); -+ template.private_data = chip; -+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97); -+ -+ return err; -+} -+ -+static void atmel_ac97_error(struct dma_request *_req) -+{ -+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req); -+ struct atmel_ac97 *chip = req->dev_id; -+ -+ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n", -+ req->req.channel); -+} -+ -+static void atmel_ac97_block_complete(struct dma_request *_req) -+{ -+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req); -+ struct atmel_ac97 *chip = req->dev_id; -+ if (req->periph_id == chip->dma.tx_periph_id) -+ snd_pcm_period_elapsed(chip->playback_substream); -+ else -+ snd_pcm_period_elapsed(chip->capture_substream); -+} -+ -+/* -+ * Codec part. -+ */ -+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg, -+ unsigned short val) -+{ -+ struct atmel_ac97 *chip = get_chip(ac97); -+ unsigned long word; -+ int timeout = 40; -+ -+ word = (reg & 0x7f) << 16 | val; -+ -+ do { -+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) { -+ ac97c_writel(chip, COTHR, word); -+ return; -+ } -+ udelay(1); -+ } while (--timeout); -+ -+ dev_dbg(&chip->pdev->dev, "codec write timeout\n"); -+} -+ -+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97, -+ unsigned short reg) -+{ -+ struct atmel_ac97 *chip = get_chip(ac97); -+ unsigned long word; -+ int timeout = 40; -+ int write = 10; -+ -+ word = (0x80 | (reg & 0x7f)) << 16; -+ -+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) -+ ac97c_readl(chip, CORHR); -+ -+retry_write: -+ timeout = 40; -+ -+ do { -+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) { -+ ac97c_writel(chip, COTHR, word); -+ goto read_reg; -+ } -+ mdelay(10); -+ } while (--timeout); -+ -+ if (!--write) -+ goto timed_out; -+ goto retry_write; -+ -+read_reg: -+ do { -+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) { -+ unsigned short val = ac97c_readl(chip, CORHR); -+ return val; -+ } -+ mdelay(10); -+ } while (--timeout); -+ -+ if (!--write) -+ goto timed_out; -+ goto retry_write; -+ -+timed_out: -+ dev_dbg(&chip->pdev->dev, "codec read timeout\n"); -+ return 0xffff; -+} -+ -+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip) -+{ -+ ac97c_writel(chip, MR, AC97C_MR_WRST); -+ mdelay(1); -+ ac97c_writel(chip, MR, AC97C_MR_ENA); -+} -+ -+static void snd_atmel_ac97_destroy(struct snd_card *card) -+{ -+ struct atmel_ac97 *chip = get_chip(card); -+ -+ if (chip->regs) -+ iounmap(chip->regs); -+ -+ if (chip->mck) { -+ clk_disable(chip->mck); -+ clk_put(chip->mck); -+ } -+ -+ if (chip->dma.req_tx.req.dmac) { -+ dma_release_channel(chip->dma.req_tx.req.dmac, -+ chip->dma.req_tx.req.channel); -+ } -+ if (chip->dma.req_rx.req.dmac) { -+ dma_release_channel(chip->dma.req_rx.req.dmac, -+ chip->dma.req_rx.req.channel); -+ } -+} -+ -+static int __devinit snd_atmel_ac97_create(struct snd_card *card, -+ struct platform_device *pdev) -+{ -+ static struct snd_ac97_bus_ops ops = { -+ .write = snd_atmel_ac97_write, -+ .read = snd_atmel_ac97_read, -+ }; -+ struct atmel_ac97 *chip = get_chip(card); -+ struct resource *regs; -+ struct clk *mck; -+ int err; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) -+ return -ENXIO; -+ -+ mck = clk_get(&pdev->dev, "pclk"); -+ if (IS_ERR(mck)) -+ return PTR_ERR(mck); -+ clk_enable(mck); -+ chip->mck = mck; -+ -+ card->private_free = snd_atmel_ac97_destroy; -+ -+ spin_lock_init(&chip->lock); -+ chip->card = card; -+ chip->pdev = pdev; -+ -+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!chip->regs) -+ return -ENOMEM; -+ -+ snd_card_set_dev(card, &pdev->dev); -+ -+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus); -+ -+ return err; -+} -+ -+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev) -+{ -+ static int dev; -+ struct snd_card *card; -+ struct atmel_ac97 *chip; -+ int err; -+ int ch; -+ -+ mutex_init(&opened_mutex); -+ -+ err = -ENOMEM; -+ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, -+ THIS_MODULE, sizeof(struct atmel_ac97)); -+ if (!card) -+ goto out; -+ chip = get_chip(card); -+ -+ err = snd_atmel_ac97_create(card, pdev); -+ if (err) -+ goto out_free_card; -+ -+ snd_atmel_ac97_reset(chip); -+ -+ err = snd_atmel_ac97_mixer_new(chip); -+ if (err) -+ goto out_free_card; -+ -+ err = snd_atmel_ac97_pcm_new(chip); -+ if (err) -+ goto out_free_card; -+ -+ /* TODO: Get this information from the platform device */ -+ chip->dma.req_tx.req.dmac = find_dma_controller(0); -+ if (!chip->dma.req_tx.req.dmac) { -+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n"); -+ err = -ENODEV; -+ goto out_free_card; -+ } -+ chip->dma.req_rx.req.dmac = find_dma_controller(0); -+ if (!chip->dma.req_rx.req.dmac) { -+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n"); -+ err = -ENODEV; -+ goto out_free_card; -+ } -+ -+ chip->dma.rx_periph_id = 3; -+ chip->dma.tx_periph_id = 4; -+ -+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac); -+ if (ch < 0) { -+ dev_dbg(&chip->pdev->dev, -+ "could not allocate TX DMA channel\n"); -+ err = ch; -+ goto out_free_card; -+ } -+ chip->dma.req_tx.req.channel = ch; -+ chip->dma.req_tx.width = DMA_WIDTH_16BIT; -+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete; -+ chip->dma.req_tx.req.error = atmel_ac97_error; -+ -+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac); -+ if (ch < 0) { -+ dev_dbg(&chip->pdev->dev, -+ "could not allocate RX DMA channel\n"); -+ err = ch; -+ goto out_free_card; -+ } -+ chip->dma.req_rx.req.channel = ch; -+ chip->dma.req_rx.width = DMA_WIDTH_16BIT; -+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete; -+ chip->dma.req_rx.req.error = atmel_ac97_error; -+ -+ strcpy(card->driver, "atmel_ac97c"); -+ strcpy(card->shortname, "atmel_ac97c"); -+ sprintf(card->longname, "Atmel AVR32 AC97 controller"); -+ -+ err = snd_card_register(card); -+ if (err) -+ goto out_free_card; -+ -+ platform_set_drvdata(pdev, card); -+ dev++; -+ -+ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n", -+ chip->regs); -+ -+ return 0; -+ -+out_free_card: -+ snd_card_free(card); -+out: -+ return err; -+} -+ -+#ifdef CONFIG_PM -+ static int -+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg) -+{ -+ struct snd_card *card = platform_get_drvdata(pdev); -+ struct atmel_ac97 *chip = card->private_data; -+ -+ clk_disable(chip->mck); -+ -+ return 0; -+} -+ -+static int snd_atmel_ac97_resume(struct platform_device *pdev) -+{ -+ struct snd_card *card = dev_get_drvdata(pdev); -+ struct atmel_ac97 *chip = card->private_data; -+ -+ clk_enable(chip->mck); -+ -+ return 0; -+} -+#else -+#define snd_atmel_ac97_suspend NULL -+#define snd_atmel_ac97_resume NULL -+#endif -+ -+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev) -+{ -+ struct snd_card *card = platform_get_drvdata(pdev); -+ -+ snd_card_free(card); -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver atmel_ac97_driver = { -+ .remove = __devexit_p(snd_atmel_ac97_remove), -+ .driver = { -+ .name = "atmel_ac97c", -+ }, -+ .suspend = snd_atmel_ac97_suspend, -+ .resume = snd_atmel_ac97_resume, -+}; -+ -+static int __init atmel_ac97_init(void) -+{ -+ return platform_driver_probe(&atmel_ac97_driver, -+ snd_atmel_ac97_probe); -+} -+module_init(atmel_ac97_init); -+ -+static void __exit atmel_ac97_exit(void) -+{ -+ platform_driver_unregister(&atmel_ac97_driver); -+} -+module_exit(atmel_ac97_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller"); -+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); -diff -Nrup linux-2.6.24/sound/avr32/ac97c.h linux-avr32/sound/avr32/ac97c.h ---- linux-2.6.24/sound/avr32/ac97c.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/sound/avr32/ac97c.h 2008-02-01 14:51:48.000000000 -0500 -@@ -0,0 +1,71 @@ -+/* -+ * Register definitions for the Atmel AC97 Controller. -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __SOUND_AVR32_AC97C_H -+#define __SOUND_AVR32_AC97C_H -+ -+#define AC97C_MR 0x08 -+#define AC97C_ICA 0x10 -+#define AC97C_OCA 0x14 -+#define AC97C_CARHR 0x20 -+#define AC97C_CATHR 0x24 -+#define AC97C_CASR 0x28 -+#define AC97C_CAMR 0x2c -+#define AC97C_CBRHR 0x30 -+#define AC97C_CBTHR 0x34 -+#define AC97C_CBSR 0x38 -+#define AC97C_CBMR 0x3c -+#define AC97C_CORHR 0x40 -+#define AC97C_COTHR 0x44 -+#define AC97C_COSR 0x48 -+#define AC97C_COMR 0x4c -+#define AC97C_SR 0x50 -+#define AC97C_IER 0x54 -+#define AC97C_IDR 0x58 -+#define AC97C_IMR 0x5c -+#define AC97C_VERSION 0xfc -+ -+#define AC97C_CATPR PDC_TPR -+#define AC97C_CATCR PDC_TCR -+#define AC97C_CATNPR PDC_TNPR -+#define AC97C_CATNCR PDC_TNCR -+#define AC97C_CARPR PDC_RPR -+#define AC97C_CARCR PDC_RCR -+#define AC97C_CARNPR PDC_RNPR -+#define AC97C_CARNCR PDC_RNCR -+#define AC97C_PTCR PDC_PTCR -+ -+#define AC97C_MR_ENA (1 << 0) -+#define AC97C_MR_WRST (1 << 1) -+#define AC97C_MR_VRA (1 << 2) -+ -+#define AC97C_CSR_TXRDY (1 << 0) -+#define AC97C_CSR_UNRUN (1 << 2) -+#define AC97C_CSR_RXRDY (1 << 4) -+#define AC97C_CSR_ENDTX (1 << 10) -+#define AC97C_CSR_ENDRX (1 << 14) -+ -+#define AC97C_CMR_SIZE_20 (0 << 16) -+#define AC97C_CMR_SIZE_18 (1 << 16) -+#define AC97C_CMR_SIZE_16 (2 << 16) -+#define AC97C_CMR_SIZE_10 (3 << 16) -+#define AC97C_CMR_CEM_LITTLE (1 << 18) -+#define AC97C_CMR_CEM_BIG (0 << 18) -+#define AC97C_CMR_CENA (1 << 21) -+#define AC97C_CMR_PDCEN (1 << 22) -+ -+#define AC97C_SR_CAEVT (1 << 3) -+ -+#define AC97C_CH_ASSIGN(slot, channel) \ -+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3))) -+#define AC97C_CHANNEL_NONE 0x0 -+#define AC97C_CHANNEL_A 0x1 -+#define AC97C_CHANNEL_B 0x2 -+ -+#endif /* __SOUND_AVR32_AC97C_H */ -diff -Nrup linux-2.6.24/sound/avr32/Kconfig linux-avr32/sound/avr32/Kconfig ---- linux-2.6.24/sound/avr32/Kconfig 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/sound/avr32/Kconfig 2008-02-01 14:51:48.000000000 -0500 -@@ -0,0 +1,11 @@ -+menu "AVR32 devices" -+ depends on SND != n && AVR32 -+ -+config SND_ATMEL_AC97 -+ tristate "Atmel AC97 Controller Driver" -+ select SND_PCM -+ select SND_AC97_CODEC -+ help -+ ALSA sound driver for the Atmel AC97 controller. -+ -+endmenu -diff -Nrup linux-2.6.24/sound/avr32/Makefile linux-avr32/sound/avr32/Makefile ---- linux-2.6.24/sound/avr32/Makefile 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/sound/avr32/Makefile 2008-02-01 14:51:48.000000000 -0500 -@@ -0,0 +1,3 @@ -+snd-atmel-ac97-objs := ac97c.o -+ -+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o -diff -Nrup linux-2.6.24/sound/Kconfig linux-avr32/sound/Kconfig ---- linux-2.6.24/sound/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/sound/Kconfig 2008-02-01 14:51:48.000000000 -0500 -@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig" - - source "sound/arm/Kconfig" - -+source "sound/avr32/Kconfig" -+ - if SPI - source "sound/spi/Kconfig" - endif -diff -Nrup linux-2.6.24/sound/Makefile linux-avr32/sound/Makefile ---- linux-2.6.24/sound/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/sound/Makefile 2008-02-01 14:51:48.000000000 -0500 -@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw - obj-$(CONFIG_SOUND_PRIME) += oss/ - obj-$(CONFIG_DMASOUND) += oss/ - obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ -- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ -+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/ - obj-$(CONFIG_SND_AOA) += aoa/ - - # This one must be compilable even if sound is configured out -diff -Nrup linux-2.6.24/sound/oss/at32_abdac.c linux-avr32/sound/oss/at32_abdac.c ---- linux-2.6.24/sound/oss/at32_abdac.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/sound/oss/at32_abdac.c 2008-02-01 14:51:49.000000000 -0500 -@@ -0,0 +1,722 @@ -+/* -+ * OSS Sound Driver for the Atmel AT32 on-chip DAC. -+ * -+ * Copyright (C) 2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/dma-mapping.h> -+#include <linux/fs.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/sound.h> -+#include <linux/soundcard.h> -+ -+#include <asm/byteorder.h> -+#include <asm/dma-controller.h> -+#include <asm/io.h> -+#include <asm/uaccess.h> -+ -+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */ -+#include <linux/byteorder/swabb.h> -+ -+#include "at32_abdac.h" -+ -+#define DMA_BUFFER_SIZE 32768 -+#define DMA_PERIOD_SHIFT 10 -+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT) -+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE -+ -+struct sound_settings { -+ unsigned int format; -+ unsigned int channels; -+ unsigned int sample_rate; -+ /* log2(bytes per sample) */ -+ unsigned int input_order; -+}; -+ -+struct at32_dac { -+ spinlock_t lock; -+ void __iomem *regs; -+ -+ /* head and tail refer to number of words */ -+ struct { -+ u32 *buf; -+ int head; -+ int tail; -+ } dma; -+ -+ struct semaphore sem; -+ wait_queue_head_t write_wait; -+ -+ /* -+ * Read at most ucount bytes from ubuf, translate to 2-channel -+ * signed 16-bit big endian format and write to the DMA buffer -+ * as long as there is room left. Return the number of bytes -+ * successfully copied from ubuf, or -EFAULT if the first -+ * sample from ubuf couldn't be read. This function is not -+ * called unless there is room for at least one sample (4 -+ * bytes) in the DMA buffer. -+ */ -+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf, -+ size_t ucount); -+ -+ struct sound_settings dsp_settings; -+ struct dma_request_cyclic req; -+ -+ struct clk *mck; -+ struct clk *sample_clk; -+ struct platform_device *pdev; -+ int busy; -+ int playing; -+ int dev_dsp; -+}; -+static struct at32_dac *the_dac; -+ -+static inline unsigned int abdac_get_head(struct at32_dac *dac) -+{ -+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1); -+} -+ -+static inline unsigned int abdac_get_tail(struct at32_dac *dac) -+{ -+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1); -+} -+ -+static inline unsigned int abdac_dma_space(struct at32_dac *dac) -+{ -+ unsigned int space; -+ -+ space = ((dac->dma.tail - dac->dma.head - 1) -+ & ((DMA_BUFFER_SIZE / 4) - 1)); -+ return space; -+} -+ -+static void abdac_update_dma_tail(struct at32_dac *dac) -+{ -+ dma_addr_t dma_addr; -+ unsigned int new_tail; -+ -+ if (dac->playing) { -+ dma_addr = dma_get_current_pos(dac->req.req.dmac, -+ dac->req.req.channel); -+ new_tail = (dma_addr - dac->req.buffer_start) / 4; -+ if (new_tail >= dac->dma.head -+ && (dac->dma.tail < dac->dma.head -+ || dac->dma.tail > new_tail)) -+ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n"); -+ dac->dma.tail = new_tail; -+ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n", -+ dma_addr, dac->req.buffer_start, dac->dma.tail); -+ } -+} -+ -+static int abdac_start(struct at32_dac *dac) -+{ -+ int ret; -+ -+ if (dac->playing) -+ return 0; -+ -+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE); -+ -+ clk_enable(dac->sample_clk); -+ -+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req); -+ if (ret) -+ goto out_stop_clock; -+ -+ dev_dbg(&dac->pdev->dev, "starting DMA...\n"); -+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel); -+ if (ret) -+ goto out_stop_request; -+ -+ dac_writel(dac, CTRL, DAC_BIT(EN)); -+ dac->playing = 1; -+ -+ return 0; -+ -+out_stop_request: -+ dma_stop_request(dac->req.req.dmac, -+ dac->req.req.channel); -+out_stop_clock: -+ clk_disable(dac->sample_clk); -+ return ret; -+} -+ -+static int abdac_stop(struct at32_dac *dac) -+{ -+ if (dac->playing) { -+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel); -+ dac_writel(dac, DATA, 0); -+ dac_writel(dac, CTRL, 0); -+ dac->playing = 0; -+ clk_disable(dac->sample_clk); -+ } -+ -+ return 0; -+} -+ -+static int abdac_dma_prepare(struct at32_dac *dac) -+{ -+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE, -+ &dac->req.buffer_start, GFP_KERNEL); -+ if (!dac->dma.buf) -+ return -ENOMEM; -+ -+ dac->dma.head = dac->dma.tail = 0; -+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE; -+ dac->req.buffer_size = DMA_BUFFER_SIZE; -+ -+ return 0; -+} -+ -+static void abdac_dma_cleanup(struct at32_dac *dac) -+{ -+ if (dac->dma.buf) -+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE, -+ dac->dma.buf, dac->req.buffer_start); -+ dac->dma.buf = NULL; -+} -+ -+static void abdac_dma_block_complete(struct dma_request *req) -+{ -+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req); -+ struct at32_dac *dac = container_of(creq, struct at32_dac, req); -+ -+ wake_up(&dac->write_wait); -+} -+ -+static void abdac_dma_error(struct dma_request *req) -+{ -+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req); -+ struct at32_dac *dac = container_of(creq, struct at32_dac, req); -+ -+ dev_err(&dac->pdev->dev, "DMA error\n"); -+} -+ -+static irqreturn_t abdac_interrupt(int irq, void *dev_id) -+{ -+ struct at32_dac *dac = dev_id; -+ u32 status; -+ -+ status = dac_readl(dac, INT_STATUS); -+ if (status & DAC_BIT(UNDERRUN)) { -+ dev_err(&dac->pdev->dev, "Underrun detected!\n"); -+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN)); -+ } else { -+ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n", -+ status); -+ dac_writel(dac, INT_CLR, status); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf, -+ size_t ucount) -+{ -+ ssize_t ret; -+ -+ if (dac->dsp_settings.channels == 2) { -+ const u32 __user *up = (const u32 __user *)ubuf; -+ u32 sample; -+ -+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) { -+ if (!abdac_dma_space(dac)) -+ break; -+ -+ if (unlikely(__get_user(sample, up++))) { -+ if (ret == 0) -+ ret = -EFAULT; -+ break; -+ } -+ dac->dma.buf[abdac_get_head(dac)] = sample; -+ dac->dma.head++; -+ } -+ } else { -+ const u16 __user *up = (const u16 __user *)ubuf; -+ u16 sample; -+ -+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) { -+ if (!abdac_dma_space(dac)) -+ break; -+ -+ if (unlikely(__get_user(sample, up++))) { -+ if (ret == 0) -+ ret = -EFAULT; -+ break; -+ } -+ dac->dma.buf[abdac_get_head(dac)] -+ = (sample << 16) | sample; -+ dac->dma.head++; -+ } -+ } -+ -+ return ret; -+} -+ -+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf, -+ size_t ucount) -+{ -+ ssize_t ret; -+ -+ if (dac->dsp_settings.channels == 2) { -+ const u32 __user *up = (const u32 __user *)ubuf; -+ u32 sample; -+ -+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) { -+ if (!abdac_dma_space(dac)) -+ break; -+ -+ if (unlikely(__get_user(sample, up++))) { -+ if (ret == 0) -+ ret = -EFAULT; -+ break; -+ } -+ /* Swap bytes in each halfword */ -+ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample); -+ dac->dma.head++; -+ } -+ } else { -+ const u16 __user *up = (const u16 __user *)ubuf; -+ u16 sample; -+ -+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) { -+ if (!abdac_dma_space(dac)) -+ break; -+ -+ if (unlikely(__get_user(sample, up++))) { -+ if (ret == 0) -+ ret = -EFAULT; -+ break; -+ } -+ sample = swab16(sample); -+ dac->dma.buf[abdac_get_head(dac)] -+ = (sample << 16) | sample; -+ dac->dma.head++; -+ } -+ } -+ -+ return ret; -+} -+ -+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac, -+ const char __user *buffer, -+ size_t count) -+{ -+ /* At least one buffer must be available at this point */ -+ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count); -+ -+ return dac->trans(dac, buffer, count); -+} -+ -+static int abdac_set_format(struct at32_dac *dac, int format) -+{ -+ unsigned int order; -+ -+ switch (format) { -+ case AFMT_S16_BE: -+ order = 1; -+ dac->trans = trans_s16be; -+ break; -+ case AFMT_S16_LE: -+ order = 1; -+ dac->trans = trans_s16le; -+ break; -+ default: -+ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format); -+ return -EINVAL; -+ } -+ -+ if (dac->dsp_settings.channels == 2) -+ order++; -+ -+ dac->dsp_settings.input_order = order; -+ dac->dsp_settings.format = format; -+ return 0; -+} -+ -+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate) -+{ -+ unsigned long new_rate; -+ int ret; -+ -+ ret = clk_set_rate(dac->sample_clk, 256 * rate); -+ if (ret < 0) -+ return ret; -+ -+ /* TODO: mplayer seems to have a problem with this */ -+#if 0 -+ new_rate = clk_get_rate(dac->sample_clk); -+ dac->dsp_settings.sample_rate = new_rate / 256; -+#else -+ dac->dsp_settings.sample_rate = rate; -+#endif -+ -+ return 0; -+} -+ -+static ssize_t abdac_dsp_write(struct file *file, -+ const char __user *buffer, -+ size_t count, loff_t *ppos) -+{ -+ struct at32_dac *dac = file->private_data; -+ DECLARE_WAITQUEUE(wait, current); -+ unsigned int avail; -+ ssize_t copied; -+ ssize_t ret; -+ -+ /* Avoid address space checking in the translation functions */ -+ if (!access_ok(buffer, count, VERIFY_READ)) -+ return -EFAULT; -+ -+ down(&dac->sem); -+ -+ if (!dac->dma.buf) { -+ ret = abdac_dma_prepare(dac); -+ if (ret) -+ goto out; -+ } -+ -+ add_wait_queue(&dac->write_wait, &wait); -+ ret = 0; -+ while (count > 0) { -+ do { -+ abdac_update_dma_tail(dac); -+ avail = abdac_dma_space(dac); -+ set_current_state(TASK_INTERRUPTIBLE); -+ if (avail >= DMA_WRITE_THRESHOLD) -+ break; -+ -+ if (file->f_flags & O_NONBLOCK) { -+ if (!ret) -+ ret = -EAGAIN; -+ goto out; -+ } -+ -+ pr_debug("Going to wait (avail = %u, count = %zu)\n", -+ avail, count); -+ -+ up(&dac->sem); -+ schedule(); -+ if (signal_pending(current)) { -+ if (!ret) -+ ret = -ERESTARTSYS; -+ goto out_nosem; -+ } -+ down(&dac->sem); -+ } while (1); -+ -+ copied = abdac_dma_translate_from_user(dac, buffer, count); -+ if (copied < 0) { -+ if (!ret) -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ abdac_start(dac); -+ -+ count -= copied; -+ ret += copied; -+ } -+ -+out: -+ up(&dac->sem); -+out_nosem: -+ remove_wait_queue(&dac->write_wait, &wait); -+ set_current_state(TASK_RUNNING); -+ return ret; -+} -+ -+static int abdac_dsp_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ struct at32_dac *dac = file->private_data; -+ int __user *up = (int __user *)arg; -+ struct audio_buf_info abinfo; -+ int val, ret; -+ -+ switch (cmd) { -+ case OSS_GETVERSION: -+ return put_user(SOUND_VERSION, up); -+ -+ case SNDCTL_DSP_SPEED: -+ if (get_user(val, up)) -+ return -EFAULT; -+ if (val >= 0) { -+ abdac_stop(dac); -+ ret = abdac_set_sample_rate(dac, val); -+ if (ret) -+ return ret; -+ } -+ return put_user(dac->dsp_settings.sample_rate, up); -+ -+ case SNDCTL_DSP_STEREO: -+ if (get_user(val, up)) -+ return -EFAULT; -+ abdac_stop(dac); -+ if (val && dac->dsp_settings.channels == 1) -+ dac->dsp_settings.input_order++; -+ else if (!val && dac->dsp_settings.channels != 1) -+ dac->dsp_settings.input_order--; -+ dac->dsp_settings.channels = val ? 2 : 1; -+ return 0; -+ -+ case SNDCTL_DSP_CHANNELS: -+ if (get_user(val, up)) -+ return -EFAULT; -+ -+ if (val) { -+ if (val < 0 || val > 2) -+ return -EINVAL; -+ -+ abdac_stop(dac); -+ dac->dsp_settings.input_order -+ += val - dac->dsp_settings.channels; -+ dac->dsp_settings.channels = val; -+ } -+ return put_user(val, (int *)arg); -+ -+ case SNDCTL_DSP_GETFMTS: -+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up); -+ -+ case SNDCTL_DSP_SETFMT: -+ if (get_user(val, up)) -+ return -EFAULT; -+ -+ if (val == AFMT_QUERY) { -+ val = dac->dsp_settings.format; -+ } else { -+ ret = abdac_set_format(dac, val); -+ if (ret) -+ return ret; -+ } -+ return put_user(val, up); -+ -+ case SNDCTL_DSP_GETOSPACE: -+ abdac_update_dma_tail(dac); -+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order) -+ * (DMA_PERIOD_SIZE / 4)); -+ abinfo.bytes = (abdac_dma_space(dac) -+ << dac->dsp_settings.input_order); -+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4) -+ >> (DMA_PERIOD_SHIFT -+ + dac->dsp_settings.input_order)); -+ abinfo.fragments = ((abinfo.bytes -+ >> dac->dsp_settings.input_order) -+ / (DMA_PERIOD_SIZE / 4)); -+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n", -+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize, -+ abinfo.bytes); -+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; -+ -+ default: -+ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd); -+ return -EINVAL; -+ } -+} -+ -+static int abdac_dsp_open(struct inode *inode, struct file *file) -+{ -+ struct at32_dac *dac = the_dac; -+ int ret; -+ -+ if (file->f_mode & FMODE_READ) -+ return -ENXIO; -+ -+ down(&dac->sem); -+ ret = -EBUSY; -+ if (dac->busy) -+ goto out; -+ -+ dac->dma.head = dac->dma.tail = 0; -+ -+ /* FIXME: What are the correct defaults? */ -+ dac->dsp_settings.channels = 2; -+ abdac_set_format(dac, AFMT_S16_BE); -+ ret = abdac_set_sample_rate(dac, 8000); -+ if (ret) -+ goto out; -+ -+ file->private_data = dac; -+ dac->busy = 1; -+ -+ ret = 0; -+ -+out: -+ up(&dac->sem); -+ return ret; -+} -+ -+static int abdac_dsp_release(struct inode *inode, struct file *file) -+{ -+ struct at32_dac *dac = file->private_data; -+ -+ down(&dac->sem); -+ -+ abdac_stop(dac); -+ abdac_dma_cleanup(dac); -+ dac->busy = 0; -+ -+ up(&dac->sem); -+ -+ return 0; -+} -+ -+static struct file_operations abdac_dsp_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = abdac_dsp_write, -+ .ioctl = abdac_dsp_ioctl, -+ .open = abdac_dsp_open, -+ .release = abdac_dsp_release, -+}; -+ -+static int __init abdac_probe(struct platform_device *pdev) -+{ -+ struct at32_dac *dac; -+ struct resource *regs; -+ struct clk *mck; -+ struct clk *sample_clk; -+ int irq; -+ int ret; -+ -+ if (the_dac) -+ return -EBUSY; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) -+ return -ENXIO; -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return irq; -+ -+ mck = clk_get(&pdev->dev, "pclk"); -+ if (IS_ERR(mck)) -+ return PTR_ERR(mck); -+ sample_clk = clk_get(&pdev->dev, "sample_clk"); -+ if (IS_ERR(sample_clk)) { -+ ret = PTR_ERR(sample_clk); -+ goto out_put_mck; -+ } -+ clk_enable(mck); -+ -+ ret = -ENOMEM; -+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL); -+ if (!dac) -+ goto out_disable_clk; -+ -+ spin_lock_init(&dac->lock); -+ init_MUTEX(&dac->sem); -+ init_waitqueue_head(&dac->write_wait); -+ dac->pdev = pdev; -+ dac->mck = mck; -+ dac->sample_clk = sample_clk; -+ -+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!dac->regs) -+ goto out_free_dac; -+ -+ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac); -+ if (ret) -+ goto out_unmap_regs; -+ -+ /* FIXME */ -+ dac->req.req.dmac = find_dma_controller(0); -+ if (!dac->req.req.dmac) -+ goto out_free_irq; -+ -+ ret = dma_alloc_channel(dac->req.req.dmac); -+ if (ret < 0) -+ goto out_free_irq; -+ -+ dac->req.req.channel = ret; -+ dac->req.req.block_complete = abdac_dma_block_complete; -+ dac->req.req.error = abdac_dma_error; -+ dac->req.data_reg = regs->start + DAC_DATA; -+ dac->req.periph_id = 2; /* FIXME */ -+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH; -+ dac->req.width = DMA_WIDTH_32BIT; -+ -+ /* Make sure the DAC is silent and disabled */ -+ dac_writel(dac, DATA, 0); -+ dac_writel(dac, CTRL, 0); -+ -+ ret = register_sound_dsp(&abdac_dsp_fops, -1); -+ if (ret < 0) -+ goto out_free_dma; -+ dac->dev_dsp = ret; -+ -+ /* TODO: Register mixer */ -+ -+ the_dac = dac; -+ platform_set_drvdata(pdev, dac); -+ -+ return 0; -+ -+out_free_dma: -+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel); -+out_free_irq: -+ free_irq(irq, dac); -+out_unmap_regs: -+ iounmap(dac->regs); -+out_free_dac: -+ kfree(dac); -+out_disable_clk: -+ clk_disable(mck); -+ clk_put(sample_clk); -+out_put_mck: -+ clk_put(mck); -+ return ret; -+} -+ -+static int __exit abdac_remove(struct platform_device *pdev) -+{ -+ struct at32_dac *dac; -+ -+ dac = platform_get_drvdata(pdev); -+ if (dac) { -+ unregister_sound_dsp(dac->dev_dsp); -+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel); -+ free_irq(platform_get_irq(pdev, 0), dac); -+ iounmap(dac->regs); -+ clk_disable(dac->mck); -+ clk_put(dac->sample_clk); -+ clk_put(dac->mck); -+ kfree(dac); -+ platform_set_drvdata(pdev, NULL); -+ the_dac = NULL; -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver abdac_driver = { -+ .remove = __exit_p(abdac_remove), -+ .driver = { -+ .name = "abdac", -+ }, -+}; -+ -+static int __init abdac_init(void) -+{ -+ return platform_driver_probe(&abdac_driver, abdac_probe); -+} -+module_init(abdac_init); -+ -+static void __exit abdac_exit(void) -+{ -+ platform_driver_unregister(&abdac_driver); -+} -+module_exit(abdac_exit); -+ -+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); -+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC"); -+MODULE_LICENSE("GPL"); -diff -Nrup linux-2.6.24/sound/oss/at32_abdac.h linux-avr32/sound/oss/at32_abdac.h ---- linux-2.6.24/sound/oss/at32_abdac.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-avr32/sound/oss/at32_abdac.h 2008-02-01 14:51:49.000000000 -0500 -@@ -0,0 +1,59 @@ -+/* -+ * Register definitions for the Atmel AT32 on-chip DAC. -+ * -+ * Copyright (C) 2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __SOUND_OSS_AT32_ABDAC_H__ -+#define __SOUND_OSS_AT32_ABDAC_H__ -+ -+/* DAC register offsets */ -+#define DAC_DATA 0x0000 -+#define DAC_CTRL 0x0008 -+#define DAC_INT_MASK 0x000c -+#define DAC_INT_EN 0x0010 -+#define DAC_INT_DIS 0x0014 -+#define DAC_INT_CLR 0x0018 -+#define DAC_INT_STATUS 0x001c -+#define DAC_PDC_DATA 0x0020 -+ -+/* Bitfields in CTRL */ -+#define DAC_SWAP_OFFSET 30 -+#define DAC_SWAP_SIZE 1 -+#define DAC_EN_OFFSET 31 -+#define DAC_EN_SIZE 1 -+ -+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */ -+#define DAC_UNDERRUN_OFFSET 28 -+#define DAC_UNDERRUN_SIZE 1 -+#define DAC_TX_READY_OFFSET 29 -+#define DAC_TX_READY_SIZE 1 -+#define DAC_TX_BUFFER_EMPTY_OFFSET 30 -+#define DAC_TX_BUFFER_EMPTY_SIZE 1 -+#define DAC_CHANNEL_TX_END_OFFSET 31 -+#define DAC_CHANNEL_TX_END_SIZE 1 -+ -+/* Bit manipulation macros */ -+#define DAC_BIT(name) \ -+ (1 << DAC_##name##_OFFSET) -+#define DAC_BF(name, value) \ -+ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \ -+ << DAC_##name##_OFFSET) -+#define DAC_BFEXT(name, value) \ -+ (((value) >> DAC_##name##_OFFSET) \ -+ & ((1 << DAC_##name##_SIZE) - 1)) -+#define DAC_BFINS(name, value, old) \ -+ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \ -+ << DAC_##name##_OFFSET)) \ -+ | DAC_BF(name,value)) -+ -+/* Register access macros */ -+#define dac_readl(port, reg) \ -+ __raw_readl((port)->regs + DAC_##reg) -+#define dac_writel(port, reg, value) \ -+ __raw_writel((value), (port)->regs + DAC_##reg) -+ -+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */ -diff -Nrup linux-2.6.24/sound/oss/Kconfig linux-avr32/sound/oss/Kconfig ---- linux-2.6.24/sound/oss/Kconfig 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/sound/oss/Kconfig 2008-02-01 14:51:49.000000000 -0500 -@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL - int "DAC channel" - default "1" - depends on SOUND_SH_DAC_AUDIO -+ -+config SOUND_AT32_ABDAC -+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support" -+ depends on SOUND_PRIME && AVR32 -diff -Nrup linux-2.6.24/sound/oss/Makefile linux-avr32/sound/oss/Makefile ---- linux-2.6.24/sound/oss/Makefile 2008-01-24 17:58:37.000000000 -0500 -+++ linux-avr32/sound/oss/Makefile 2008-02-01 14:51:49.000000000 -0500 -@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o a - - # Please leave it as is, cause the link order is significant ! - -+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o - obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o - obj-$(CONFIG_SOUND_HAL2) += hal2.o - obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o |